GGPPSS PPoocckkeett PPCC PPhhoonnee UUsseerr MMaannuuaall
Safety Instructions
Please Read Before Proceeding.
Avoid heavily pressing on the touch screen.
Avoid heavily pressing on the touch screen with the stylus or your fingers.
This product is not charged when shipped from the factory. When you use
this product the first time, we recommend that you install the battery as
illustrated and fully charge it for about 8 hours before use.
Do not remove the battery while charging.
Before installing the SIM card, launch Wireless Manager, then tap the
button. When the color of the icon turns orange , this indicates
that the wireless connection of the Pocket PC is disabled.
When aboard an aircraft, at a medical facility, or at the gas pump where
wireless communication devices are prohibited, please launch the
Wireless Manager and then tap the button. When the color of the
icon turns orange , the Flight Mode is activated and the wireless
connection of the Pocket PC is disabled.
In case the Pocket PC is damaged, send it back to the dealer for repair. Do
not attempt to disassemble the Pocket PC on your own; otherwise the
warranty will be void.
Where to Find Information
For information on: See this source:
Programs on your Pocket PC This User’s Guide and Pocket PC Help. To
view Help, tap and then Help.
Additional programs that can
be installed on the Pocket PC
The Pocket PC Getting Started CD.
Connecting to and
synchronizing with a desktop
computer
Check the user’s guide that comes with this
product or look for the online help relevant
to synchronization tools on the desktop PC
or the Pocket PC.
Up-to-date information on
your Pocket PC
http://www.microsoft.com/windowsmobile/
This document lists the functions, specifications, and illustrations for
reference only. The actual purchased product should be taken as the
standard. Supported features for this product is subject to version
differences. We reserve the right to make modifications to the features and
contents contained in the instruction manual and the product.
Trademarks
Trademarks and names of products contained in this manual are the
properties respective registered companies.
Java and other Java related trademarks are the registered
trademarks of Sun Microsystems, Inc.
Digital Rights Management
This product supports Digital Rights Management (DRM) technologies.
X-1
UUsseerr MMaannuuaall
SAFETY INSTRUCTIONS ........................................................................ 2 WHERE TO FIND INFORMATION............................................................ 3 TRADEMARKS ...................................................................................... 4 DIGITAL RIGHTS MANAGEMENT .......................................................... 4
1 Getting Started / ...................................................................... 1-1
PACKAGE CONTENT .......................................................................... 1-1 EXTERNAL VIEWS............................................................................. 1-2
QWERTY Keyboard...................................................................... 1-4 Hardware Hotkey Functions ........................................................ 1-4
USING THE POCKET PC FOR THE FIRST TIME .................................... 1-6 Get your Pocket PC ready to go................................................... 1-6 Charging Power and Power Supply............................................. 1-7 Re-installation or Replacing the Battery...................................... 1-9
POWER ON AND OFF ....................................................................... 1-10 Power Off Mode ......................................................................... 1-10 Sleep Mode................................................................................. 1-11 Turn on the Screen ..................................................................... 1-12 Restarting the Pocket PC ........................................................... 1-13
Reset....................................................................................... 1-14 Default Settings...................................................................... 1-15 Clean Boot ............................................................................. 1-16
X-2
2 Using the Pocket PC /.............................................................. 2-1
START ............................................................................................... 2-1 Screen........................................................................................... 2-1 Today Screen ................................................................................ 2-3 Programs...................................................................................... 2-6 System Application Programs ...................................................... 2-9
SPB MOBILE SHELL ........................................................................ 2-12 Configure Your Spb Mobile Shell ............................................... 2-14
WIRELESS MANAGER...................................................................... 2-16 QUICKBAR...................................................................................... 2-19 M-DESK.......................................................................................... 2-20 ENTER INFORMATION ON YOUR POCKET PC................................... 2-22
Using QWERTY Keyboard ......................................................... 2-23 Enter Text Using the Input Panel ............................................... 2-27
Type with the Soft Keyboard ................................................. 2-29 Use Letter Recognizer............................................................ 2-29 Use Block Recognizer............................................................ 2-29 Use Transcriber ...................................................................... 2-30 Select Typed Text ................................................................... 2-30
Write on the Screen .................................................................... 2-31 Write on the Screen................................................................ 2-31 Select Writing......................................................................... 2-32
Draw on the Screen.................................................................... 2-33 Create a Drawing ................................................................... 2-33 Select a Drawing .................................................................... 2-34
Record a Message ...................................................................... 2-34 Create a Recording................................................................. 2-35
Voice Commander ...................................................................... 2-36
X-3
3 Voice Command Satellite Navigation / .................................. 3-1
NAVIGATION DEVICE INSTALLATION................................................. 3-1 GPS NAVIGATION SOFTWARE INSTALLATION.................................... 3-2 CONDITIONS FOR USING GPS CAR NAVIGATION............................... 3-2 SATELLITE DATA UPDATE (NOT SUPPORTED IN USA) ....................... 3-4 LOCATION SMS ................................................................................ 3-7 GPS VIEWER .................................................................................... 3-9
4 Using the Phone / ..................................................................... 4-1
INSTALLING AND REMOVING THE SIM CARD.................................... 4-2 USING THE PHONE ............................................................................ 4-3
Adjusting the Phone Volume......................................................... 4-4 TURNING THE PHONE ON OR OFF AND MAKING CALLS............................. 4-5
Video Call ( Applies to M810)................................................... 4-7 Toolbar......................................................................................... 4-9 Call from Contacts ..................................................................... 4-11 Call from Speed Dial ( Applies to M750)................................ 4-11 Call from the Call History.......................................................... 4-12
CUSTOMIZE YOUR PHONE............................................................... 4-13 Add Ringtone.............................................................................. 4-14
PHONE APPLICATION PROGRAMS .................................................... 4-15 SIM Manager ............................................................................. 4-15
Standard Display .................................................................... 4-15 Full-Screen Display................................................................ 4-16 Copy Phonebook Information ................................................ 4-17 SMS Management.................................................................. 4-18
SIM Value Add Service ............................................................... 4-19 SMS Sender ................................................................................ 4-20
X-4
Speed Dial.................................................................................. 4-21 Hot Key Switch...................................................................... 4-21 Frequently Dialed Screen....................................................... 4-22 Index Dial............................................................................... 4-23
Call Filter *................................................................................ 4-24
5 Customize Your Pocket PC /................................................... 5-1
ADJUSTING SETTINGS ....................................................................... 5-1 NOTIFICATIONS ................................................................................. 5-2 POWER PREFERENCE SETTINGS ........................................................ 5-3 BACKLIGHT ...................................................................................... 5-4 MICROPHONE.................................................................................... 5-5 HEADSET VOLUME LIMITER ............................................................. 5-6 ADJUST VOLUME .............................................................................. 5-7 SCENARIOS ....................................................................................... 5-8 TASK MANAGER ............................................................................... 5-9 FIND AND ORGANIZE INFORMATION ............................................... 5-10 NAVIGATION BAR AND COMMAND BAR .......................................... 5-11 POP-UP MENUS................................................................................ 5-12 REDEFINE HOT KEYS ...................................................................... 5-13
6 Synchronization /..................................................................... 6-1
WINDOWS VISTA PART...................................................................... 6-1 WINDOWS XP/2000/98 PART ............................................................ 6-3 INSTALLING AND USING ACTIVESYNC .............................................. 6-4
FAQ About Synchronization ......................................................... 6-6 USB SYNCHRONIZATION .................................................................. 6-6 SYNCHRONIZATION TOOL ON POCKET PC......................................... 6-9 SYNCHRONIZING USING BLUETOOTH .............................................. 6-10
X-5
7 Connections / ........................................................................... 7-1
CONNECTING TO THE INTERNET........................................................ 7-1 Connection Wizard ....................................................................... 7-1 Setting the GPRS Connection....................................................... 7-3 Starting GPRS Connection........................................................... 7-5 Disconnecting GPRS.................................................................... 7-6 GPRS Settings .............................................................................. 7-7 Band Selection ( Applies to M810)............................................ 7-8
USING BLUETOOTH........................................................................... 7-9 Setup the Bluetooth Connection ................................................. 7-10
INTERNET SHARING ........................................................................ 7-13 CSD LINE TYPE .............................................................................. 7-14 CONNECTING WITH A PERSONAL COMPUTER .................................. 7-15 WIRELESS LAN TRANSMISSION ..................................................... 7-15
8 Using Wireless LAN / .............................................................. 8-1
CONNECTING TO WIRELESS LAN ..................................................... 8-1 CONFIGURE YOUR WIRELESS NETWORK .......................................... 8-3
WLAN Setup Scenarios ................................................................ 8-3 Configure Your Wireless Network (Reference for
a normal network setup)........................................................... 8-4 Configure Your Wireless Network (Reference for
Proxy setup) ............................................................................. 8-7
9 Sending and Receiving Messages / ......................................... 9-1
E-MAILS AND SMS MESSAGES ......................................................... 9-2 Synchronizing E-mail Messages................................................... 9-3 Connecting Directly to the Mail Server ....................................... 9-4
X-6
E-mail Server Setup ..................................................................... 9-5 Using E-mails and SMS ............................................................... 9-7 Direct Push Technology Alert..................................................... 9-10
Direct Push Technology Alert Settings .................................. 9-10 WINDOWS LIVE™ MESSENGER ...................................................... 9-12
Setting Up................................................................................... 9-13 Working with Contacts ............................................................... 9-14 Chatting with Contacts............................................................... 9-15
MMS MESSAGE.............................................................................. 9-16 Create and Edit MMS................................................................. 9-16
BIRTHDAY REMINDER * .................................................................. 9-19
10 Multimedia /....................................................................... 10-1
USING CAMERA .............................................................................. 10-1 Pocket PC Exterior and Photograph Functions......................... 10-1 Pocket PC Exterior and Video Functions................................... 10-2 How to Use the Camera? ........................................................... 10-3 Common Tools for Photograph .................................................. 10-7 Common Tools for Video ............................................................ 10-8 Advanced Setup for Photograph or Video.................................. 10-9
MULTIMEDIA MANAGER ............................................................... 10-11 Preview Multimedia Information ............................................. 10-11 Slide Show Function................................................................. 10-12 Multimedia Manager Tools ...................................................... 10-13
IMAGE MAKER * ........................................................................... 10-14 IMAGE WIZARD *.......................................................................... 10-16 FM TUNER.................................................................................... 10-18 NAMECARD MANAGER ................................................................. 10-20
Digitize New Name Cards........................................................ 10-20 Name Cards Management........................................................ 10-23
X-7
11 Companion Programs / ..................................................... 11-1
CALENDAR: SCHEDULING APPOINTMENTS AND MEETINGS............. 11-2 Create an Appointment............................................................... 11-3 Use the Summary Screen............................................................ 11-4 Create Meeting Requests............................................................ 11-4
Schedule a Meeting................................................................ 11-5 CONTACTS: TRACKING FRIENDS AND COLLEAGUES........................ 11-6
Create a Contact ........................................................................ 11-7 Find a Contact ........................................................................... 11-8 Use the Summary Screen............................................................ 11-9
TASKS: KEEPING A TO DO LIST ..................................................... 11-10 Create a Task.............................................................................11-11 Use the Summary Screen.......................................................... 11-12
NOTES: CAPTURING THOUGHTS AND IDEAS.................................. 11-13 Create a Note ........................................................................... 11-14
WORD MOBILE ............................................................................. 11-15 EXCEL MOBILE ............................................................................. 11-18
Tips for Working in Excel Mobile............................................. 11-20 POWERPOINT MOBILE .................................................................. 11-21 WINDOWS MEDIA PLAYER............................................................ 11-22 STREAMING PLAYER ..................................................................... 11-24 INTERNET EXPLORER .................................................................... 11-26
Using Internet Explorer ........................................................... 11-26 Browse the Internet .............................................................. 11-27 View Mobile Favorites and Channels .................................. 11-28
The Mobile Favorites Folder ................................................... 11-28 Favorite Links .......................................................................... 11-29
X-8
Synchronize Mobile Favorites.................................................. 11-29 Create a Mobile Favorite...................................................... 11-29 Save Pocket PC Memory ..................................................... 11-30
JAVA.............................................................................................. 11-31
12 Maintaining the Pocket PC / ............................................ 12-1
BACKUP UTILITY ............................................................................ 12-1 Storage Space............................................................................. 12-1 Backup Files............................................................................... 12-2
Wizard Mode.......................................................................... 12-2 Standard Mode ....................................................................... 12-2
Advanced Settings Options......................................................... 12-3 Restore Files .............................................................................. 12-5
Wizard Mode.......................................................................... 12-5 Standard Mode ....................................................................... 12-6
ADDING OR REMOVING PROGRAMS................................................ 12-7 Add Programs Using Synchronization Tools.............................. 12-7 Add a Program Directly from the Internet ................................. 12-8 Add a Program to the Start Menu .............................................. 12-9 Remove Programs .................................................................... 12-10
MANAGE MEMORY ....................................................................... 12-11 View Memory Status ................................................................. 12-11 Find Available Memory............................................................ 12-12
SYSTEM INFORMATION ................................................................. 12-15
X-9
13 Voice Commander / ........................................................... 13-1
STARTING VOICE COMMANDER ...................................................... 13-2 VOICE COMMAND FORMAT............................................................. 13-3 VOICE COMMANDER SETTINGS....................................................... 13-5
Contacts Settings Page............................................................... 13-5 Application Settings Page .......................................................... 13-8 Music Settings Page ................................................................. 13-10 Advanced Settings Page ........................................................... 13-12
FAQ.............................................................................................. 13-13
14 Specifications / ................................................................... 14-1
15 Regulation Notice and Safety Declaration / .................... 15-1
SAR INFORMATION......................................................................... 15-1 HEALTH AND SAFETY INFORMATION............................................... 15-2
16 FAQ / .................................................................................. 16-1
17 Index /................................................................................. 17-1
X-10
Getting Started 1-1
11 GGeettttiinngg SSttaarrtteedd //
Package Content
Pocket PC, stylus, battery, Getting Started CD, user guide, AC adapter,
USB cable, headset, leather case, Mobile phone strap.
Pocket PC Stylus Battery Getting Started CD
User Guide USB Cable AC Adapter
Only the M810 has a video conference camera. The M750 does not
support the video conference camera and the related features; otherwise it
is identical in appearance to the M810.
1-2
External Views M810 Model
M750 Model
2
1
3
5 6
8
9 10
11 12
14 15
20 21 22
7
16
23
18
13 19
17
4
Getting Started 1-3
1. Volume control key 2. Voice Commander hot key
3. MicroSD slot 4. Hanging hole for Mobile phone
strap
5. Phone Receiver 6. Charging / Mobile Phone /
Bluetooth / WLAN / GPS LED
indicator
7. Video conference camera
( Applies to M810)
8. Display, Touch screen
9. Left Soft-Key 10. Right Soft-Key
11. Send button 12. End button
13. Navigation button. Press the
center of the button to set as
launch key.
14. Phone Speaker
15. Mini USB connector, Headset
connector
16. Power button
17. Reset button 18. Camera hot key or Camcorder
19. Stylus holder 20. Speaker
21. Built-in camera lens, flashlight
LED, preview mirror
22. Hidden antenna for Cell Phone
23. Back cover, Battery is inside
Only the M810 has a video conference camera. The M750 does not
support the video conference camera and the related features; otherwise it
is identical in appearance to the M810.
1-4
QWERTY Keyboard
Hardware Hotkey Functions
Close
Open
Getting Started 1-5
Hardware Button
Short Press (Press once and release)
Long Press (Press and hold for a few
seconds and release) +/- Adjust volume --
Connect to Voice Commander Connect to Notes
Left Soft-Key. Soft-keys on left
and right to operate function
buttons at bottom of display.
Appropriate GPS
application will be linked
for different versions
Right Soft-Key Connect to QuickBar
Connect to Phone / dial / redial /
answer
Telephone hold
Hang up during call
Disconnect during GPRS
connection
Skip to Today screen while in
other programs
Turns off the phone
function when it is
activated
Turns on the phone
function when it is
disabled
Turn on/off screen, enter the Sleep
mode
Enter Power off mode for
the Pocket PC
+ Power Button + Reset Button
= Cold boot
--
Reset Button --
Camera or Camera Shutter --
1-6
Using the Pocket PC for the First Time If you are opening this product for the first time, the main battery and
the Pocket PC are packed separately inside the product package.
Get your Pocket PC ready to go
1. Installing the SIM Card
Turn over your Pocket PC and remove the back cover. Please pay attention
to the direction of the missing corner of the SIM card, and then insert the
SIM card into the slot.
2. Installing the Battery
Place the battery in the back of Pocket PC. Make sure that the golden
contacts are aligned to the battery box; gently insert the battery until it
clicks. Then replace the back cover.
Getting Started 1-7
Charging Power and Power Supply
Connect the AC adapter plug to any household power outlet.
Connect the other plug from the AC adapter to the USB port. The Pocket
PC starts to charge automatically.
If you need to connect Pocket PC and desktop computer, you could
connect the USB cable to the USB port. And then connect the other end
of the USB cable to the USB port on the desktop computer. Your Pocket
PC will also charge at the same time.
1-8
1. It will take about 8 hours to fully charge the battery after the first time you
open the package. Subsequent charging will only take about 3 hours. After
charging, you can disconnect the AC adapter and carry the Pocket PC
around portably. To maintain smooth operation, charge the power
regularly.
2. View the battery icon on the upper right corner to check the power
usage condition.
3. The LED indicator on the top of the Pocket PC will indicate the various
functions that are currently in use.
LED
indicators Behavior Meaning
Red always lights Charging
Red is off Charging complete
Red blinks repeatedly Low battery warning Red
Red blinks Missed calls or unread messages
Green Green blinks Mobile phone is turned on
Blue Blue blinks Bluetooth is activated
Amber Amber blinks Wireless network is activated
Purple Purple blinks GPS is activated
Getting Started 1-9
Re-installation or Replacing the Battery
If the phone, GPRS or wireless LAN connection function is already
activated, deactivate it first and then replace the battery.
Turn over your Pocket PC and remove the back cover. Place the battery
in the back of Pocket PC. Make sure that the golden contacts are aligned to
the battery box; gently insert the battery until it clicks. Then replace the back
cover.
1-10
Power On and Off
Power Off Mode
1. Press and hold the “Power
Button” on the Pocket PC and
then tap Yes to turn off the Pocket
PC. All functions will be
disabled; this is not the same as
entering Sleep mode.
2. To turn on, simply press the
“Power Button” once.
Using the Stylus to Touch the Screen
Your Pocket PC is designed for graphics-based operation. Generally
speaking, we usually “use the stylus to perform basic actions such as tap,
drag, and tap and hold” on the touch screen. Other actions such as reset
and cold boot will require the use of the stylus tip.
Pull the stylus to full-length to make it easier to tap the screen during
operation. When kept completely in the stylus holder, the stylus length
shortens.
Avoid heavily pressing on the touch screen with the stylus or your
fingers.
Power Button
Getting Started 1-11
Sleep Mode
1. Press the “Power Button” of the Pocket PC to enter the Sleep mode. At this
time, the screen is turned off and all peripheral devices enter the
power-saving mode. But if the phone is turned on, it is still in the call
waiting mode.
2. To turn on the screen later, just press the “Power Button.”
3. Tap , Settings, the System tab,
Power and then the Advanced tab
to set the device to turn off
automatically after waiting for a
certain time period.
1-12
Turn on the Screen
This product is designed with a power-saving feature. If the screen is
turned off, press the “Power Button” of the Pocket PC to turn it on.
If the screen is too dark and you
cannot see clearly, set the proper
brightness level for the backlight.
Tap , Settings, the System tab,
Backlight and then the Backlight
Level tab.
Getting Started 1-13
Restarting the Pocket PC
Appropriate situation: If the Pocket PC is unable to maintain normal
operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience,
please refer to the following instructions in order:
1. Reset Press the “Reset Button” of Pocket PC with the
tip of the stylus.
2. Default Settings
procedures
If the touch screen is functional, please tap ,
Programs, Utilities, and then Default Settings.
3. Clean Boot Hold the “Power Button” and press once on the
“Reset Button” with the tip of the stylus, and
release both buttons simultaneously. Next,
continually hold the End Button until the
system inquiry screen is displayed, then release
the End Button. Press Soft-Key to answer the
question.
1-14
Reset
Reset method: Press the “Reset
Button” of Pocket PC with the tip of
the stylus.
Appropriate situation: If the Pocket PC is unable to maintain normal
operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system
startup process, the last display will be the Today screen. This will retain
the Microsoft Windows, factory pre-installed applications, user’s input
data, newly installed programs, and user custom settings.
Getting Started 1-15
Default Settings
Tap , Programs, Utilities, and then Default Settings.
1. If this application is inadvertently
accessed, please select the to
the upper right of the screen to exit,
the system will not be affected.
2. If you are certain that you wish to
perform this action, please select
the data input block on the right,
and enter the authorized code in the
block to the left. Then tap the OK
button.
Appropriate situation: If the Pocket PC is unable to maintain normal
operation, but the touch screen is functional. Please refer to the
instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory
pre-installed applications. Other settings such as user’s input data, newly
installed programs, and user custom settings will all be cleared.
1-16
Clean Boot
Cold boot method: Hold the “Power
Button” of the Pocket PC with one
hand while holding the stylus tip to
push in the “Reset Button” with the
other. Simultaneously release both the
“Power Button” and “Reset Button”.
Appropriate situation: If a previous reset has already been attempted and
the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen.
Before executing the preceding “Cold boot method”, please carefully
consider the following instructions and then decide on the cold boot
method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC
automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still
unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket
PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold
booting before continuing carefully.
Getting Started 1-17
Perform cold boot and hold the End Button . Please refer to the
following instructions before careful consideration.
Erase all data and load default?
The default is “No.” If Yes or No was not
selected, after a few seconds the system will
automatically execute the default No.
If you long press Left Soft-Key for a few
seconds to select “Yes,” then the system will
erase all data and load default. After your
Pocket PC restarts, follow the instructions on
the screen to complete.
Caution!
1. After performing a cold boot, the system will retain Microsoft Windows
and pre-installed programs. If you answer “Yes” to the question displayed
after a cold boot, other items such as the user’s input data, newly installed
programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
Perform a Reset. Performing a Cold Boot, and answer “No” when the above question
displays.
1-18
Using the Pocket PC 2-1
22 UUssiinngg tthhee PPoocckkeett PPCC //
Start Screen
Tap , Settings, the System tab, and then Screen.
The first time you use or cold boot the pocket PC, the system will ask
you to align the screen. Kindly continue to tap the center of each cross (+)
that appears and follow the screen instructions to complete the operation. If
you feel that the position is not quite accurate while tapping on the screen,
you follow the help for this section to align the screen again.
Orientation:
Portrait (default)
Landscape (right-handed)
Landscape (left-handed)
Tap the Align Screen button to
calibrate the screen. When Align
Screen appears, use the stylus to
tap the center of the cross (+) until
the next cross appears, then follow
the screen instructions to complete
the operation. Finally, tap to
exit.
Text Size tab: For selecting the
desired text size.
2-2
The following steps will bring you into the touch screen calibration
mode. These steps provide a faster and more efficacious way to enter the
touch screen calibration mode. And they also provide a method of getting
into Screen program for when the touch screen dislocation is so severe that
you completely cannot select or do anything using the stylus.
1. Simultaneously press the Left Soft-Key on the bottom-left of the Pocket
PC and the execution button in the center of the navigation pad.
2. Release these two buttons at the same time, and you will enter the
calibration screen.
Using the Pocket PC 2-3
Today Screen
When you turn on your Pocket PC for the first time each day (or after 4
hours of inactivity), you will see the “Today screen”. You can also display it
by tapping and then Today. On the “Today screen”, you can see at a
glance the important information for the day.
Start. Tap to switch to a
program.
Tap to enable or disable the GPRS
connection feature. Antenna icon. Tap to turn the
phone on or off.
Speaker icon. For adjusting
volume.
Time. Tap to display the current date and time, and the upcoming
appointments. Tap and hold the time area to select analog or digital clock
display from the list.
Spb Mobile Shell.
Today screen. Displays important information for the day. Tap on any item
to enter its relevant setup screen. The icons mean you can tap to quick link to programs, such as Task
Manager, Call Filter status, etc.
Tap to quick link to Speed Dial. Tap to quick link to Contacts.
2-4
The following table lists the icons that you may see on the Navigation
Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon
to access the instant message.
Icon Meaning
(Located on the Navigation Bar at the top of the screen)
Speaker is on
Ringer off
Pending alarm
Battery charging
Battery level
Low battery
Battery power is very low
Battery is fully charged
No battery
New instant message
New e-mail or text message (SMS)
New voice mail
If there is not enough space on the screen to display all notification icons, tap this icon to view all icons.
Active connection to computer
Synchronizing
Sync error
PowerPoint slide show
Bluetooth
Missing SIM card
The phone is turned off. Flight mode in use.
The phone is turned on. Signal strength.
Radio connected
Using the Pocket PC 2-5
Icon Meaning
(Located on the Navigation Bar at the top of the screen)
No signal. No service. The device has not yet connected to a network.
Lost signal. The device is searching for a signal.
Missed call
Voice call in progress
Data call in progress
Calls are forwarded
Call on hold
Missed call
Roaming
GPRS not in use
GPRS available
GPRS connected
Synchronizing over GPRS in use
EDGE available
EDGE connected
Synchronizing over EDGE in use
3G network available
3G connected
Synchronizing over 3G in use
3.5 G network available
3.5 G connected
Synchronizing over 3.5 G in use
are icons related to connection features. They are shown according to your monthly plans, telecom service provider, and network distribution conditions or effective system coverage area. To make modifications to your monthly plans, please contact your telecom service provider.
2-6
Icon Meaning
(Located on the Navigation Bar at the top of the screen)
Wireless LAN Active
Wireless LAN Data Calling
Wireless LAN in use
Programs
Download Programs
For effective use of memory, the programs marked with an asterisk “*”,
are posted on our website: http://www.glofiish.com for downloading.
Refer to further instructions for use after downloading these programs.
You can switch from one program to another by selecting it from the
menu. (You can customize which programs you see on this menu. For
information, see “Adjusting Settings” section.) To access some programs,
you’ll need to tap , Programs, and then the program name.
Icon Programs Description
Games Group Bubble Breaker, Solitaire
Multimedia Group Camera, FM Tuner, Image Maker *, Image Wizard *, Multimedia Manager, Namecard Manager
Office Mobile Group Excel Mobile, PowerPoint Mobile, Word Mobile
Phone Group Add Ringtone, Call Filter *, MMS Message, Scenarios, SIM Manager, SMS Sender, Speed Dial
Using the Pocket PC 2-7
Icon Programs Description
Utilities Group Application Recovery, Backup Utility, Birthday Reminder *, Default Settings, M-Desk, Task Manager, WLAN Utility
Voice Commander Group
Voice Commander, Voice Commander Settings
GPS Group GPS Viewer, Location SMS, Satellite Data Update
ActiveSync Synchronize information between your Pocket PC and desktop computer.
Calendar Keep track of your appointments and create meeting requests.
Contacts Keep track of your friends and
colleagues.
Notes Create handwritten or typed notes, drawings, and recordings.
Tasks Keep track of your tasks.
Messaging Send and receive e-mail messages.
Internet Explorer Browse Web and WAP sites, and download new programs and files from the Internet.
Windows Live MSN related programs.
Messenger Send and receive instant messages with your MSN contacts.
Calculator Performs basic calculations.
Pictures & Videos Take, view, and edit pictures.
Windows Media Player Plays movies or sound files.
Streaming Player Playback video or audio files from
RTSP, HTTP etc.
2-8
Icon Programs Description
Java Supports Java; legal download and use
of applications.
Internet Sharing Simulate Pocket PC as a modem for the PC to surf the Internet.
Search Quickly find the information you need.
File Explorer Manages files or folders.
Wireless Manager Manage wireless connections and related functions.
You can also switch to some programs by pressing a program button.
Your Pocket PC has one or more program buttons located on the front or side
of the Pocket PC. The icons on the buttons identify the programs they switch
to. For more information, refer to “Redefine Hot Keys” section.
Using the Pocket PC 2-9
System Application Programs
, Settings, the Personal tab
Program Description
Buttons Set the hot key for Pocket PC hardware button.
Input Set the details about the input method.
Lock Set the access rights and password of Pocket PC.
Menus Set the items displaying on the Start menu.
Owner Information Input owner information.
Phone Set the details about the phone.
Sounds &
Notifications
Set the volume and notification method.
Today Set the look of Today screen and display
information.
2-10
, Settings, the System tab
Program Description
About Display the important information about the Pocket
PC.
Backlight Set the details about the backlight and brightness.
Certificates For network identification to prevent unauthorized
access.
Clock & Alarms Set the time and alarms.
Headset Volume
Limiter
Set the highest output decibels for the headset
volume.
Memory View the memory usage, and the list of running
programs, etc.
Microphone Set the microphone volume.
Power View the power usage condition, whether or not to
power off after a waiting period.
Regional Settings Set the region and information display formats such
as date, time, etc.
Remove Programs Remove programs that are no longer used.
Screen Aligning the screen is helpful in determining the
touch accuracy. You can select the portrait or
landscape orientation.
Spb Mobile Shell Set the details about Spb Mobile Shell.
System Information View the system information.
Using the Pocket PC 2-11
, Settings, the Connections tab
Program Description
Band Selection Set the security validation method for the GPRS
connection. ( Applies to M810)
Beam Set if receiving end will accept beam data
automatically or not.
Bluetooth Establish the connection between the Pocket PC and
other Bluetooth capable devices.
Connection Wizard Select the appropriate country and carrier name.
Connections Set the network connection.
CSD Line Type Set Pocket PC to simulate a modem and access the
Internet through the built-in GSM device.
GPRS Settings Use the channel type provided by your telecom
service provider.
USB to PC Change the type of USB connection.
2-12
Spb Mobile Shell
Spb Mobile Shell helps you smoothly to start a day-long life. On the
Today screen, you just need one touch at Spb Mobile Shell. Quickly show
the electric power condition, the date, the time, the weather forecast, and
even easily using photo Speed Dial.
1. Touch or tap tabs to switch to other
categories.
2. Tap and hold to display a pop-up
menu of actions.
If you check Auto-Hide Mode,
you just need touch or tap the tabs
to display the details. And tap on
any empty space to close the details
window. Select Options to change the
settings.
3. Home Tab: Display the power
usage condition.
Tap a shortcut to run the program you used.
Using the Pocket PC 2-13
4. Time Tab: Display time in three
selected cities and next alarm
information.
5. Weather Tab: Display weather
forecast for the next four days.
Tap and hold to display a pop-up
menu of actions.
6. Photo Speed Dial Tab: Easily
using Photo Speed Dial gives you
the most pleasant way to dial.
Tap a not defined button to add
your contact from Contacts. Tap a defined button to call this
contact. On the other hand, you can
tap and hold to display a pop-up
menu of actions.
2-14
Configure Your Spb Mobile Shell
Tap and hold on the Spb Mobile Shell to display a pop-up menu, and then
select Options to change the settings.
Tap , Settings, the System tab, and then Spb Mobile Shell.
Move Up or Move Down: Tap to
arrange the display order of these
items in the Today screen.
Options: Some of the tabs may
have customizable options.
Replace: Replace the existing tabs
from the standard listing.
Add: Add a new tab.
Remove: Remove the selected tab.
Show and hide the tab content. Update automatically or manually.
Consider carefully before you
check this option. Once the data is
updated automatically when online,
costs will be incurred.
Using the Pocket PC 2-15
Note: either of the following connections allows your Pocket PC to
download the weather forecast data. If there is more than one connection
available, the system will automatically select the best connection, in the
following order:
1. Synchronization connection: Connect your Pocket PC to a PC (Desktop
or Notebook). Please note that your PC must be online.
2. Wireless LAN connection.
3. GPRS connection: Roaming mode cannot update GPS data
automatically. If necessary, change to manual mode.
Tap , Settings, the Personal
tab, Today, the Items tab, and
then check Spb Mobile Shell.
Make sure that Spb Mobile Shell is
checked so that the Today screen
will display this item.
2-16
Wireless Manager
On the Today screen, tap to launch Wireless Manager.
Tap the icon. When the message window appears, tap “Wireless
Manager.”
Tap , Programs and then Wireless Manager.
Wireless Manager will assist you to manage the wireless connections
of the Pocket PC. The Wireless Manager can be used to turn off the wireless
connections of the Pocket PC, and to enter the Flight Mode either for when
you require power conservation, take an airplane, at a medical facility, or at a
gas pump where wireless connection devices are prohibited.
1. On the Today screen, tap to
launch Wireless Manager.
Using the Pocket PC 2-17
2. Enter the Wireless Manager
screen.
Single tap on these buttons to
activate or disable each individual
functions. The icon indicates
that the associated function is
currently in the off state.
Tapping these buttsons will turn the
icons orange, indicating that these
functions are newly activated.
To turn off these functions, simply
tap on the buttons once again.
Tap . When it becomes ,
the GPRS connection is available.
Indicates whether the FM Tuner and GPS applications are currently
running.
If these buttons have a icon, this indicates that the associated button
is currently not running.
If the color of the icon turns orange, this indicates that the function is
activated. Select this button to activate or disable the Flight Mode. When the color of
the icon changes to orange , this indicates the device is currently in
Flight Mode, and all related applications are disabled.
2-18
3. Managing wireless connectivity.
Manager: Tap and hold for a few
seconds, and then release the
button to enter the setup page.
As indicated to the left, when the
color of the icons turns orange, this
indicates that the function is
activated.
Tapping these buttons again can
quickly turn off the FM Tuner and
GPS applications.
Flight Mode Manager: If any single one of the mobile phone, wireless
network, Bluetooth, GPRS functions is activated, tapping this button will
quickly turn off the wireless functions.
Generally speaking, when you are aboard an aircraft, at a medical facility,
or at the gas pump where wireless communication devices are prohibited,
please launch the Wireless Manager and then tap the button. When
the color of the icon turns orange , the Flight Mode is activated and
the wireless connection of the Pocket PC is disabled.
Using the Pocket PC 2-19
QuickBar
Press and hold the Right Soft-Key to launch QuickBar.
Tap , Programs, Utilities, and then QuickBar.
You can launch programs from the Quick Bar.
Touch or tap any icon to launch a
program.
If you do not select, Quick Bar will
quit after several seconds.
2-20
M-Desk
Tap , Programs, Utilities, and then M-Desk.
You can categorize programs on the panel according to your personal
preferences. Categorizing, renaming, deleting or editing the text color of
program names under M-Desk will not affect the default setting of the Pocket
PC.
Tap Phone, PDA or other tabs to switch to other categories. Tap and hold the tab to display a pop-up menu that allows you to Rename, Move forward or Move back. The program icon selected for this category. Tap to run this program. Tap and hold program. A pop-up menu appears and allows you to Rename, Delete, Cut, or edit the text color of the program name. Tap on empty space and the pop-up menu allows you to add New or Paste.
Enable or disable the speakerphone. Enable or disable the Bluetooth earphone function.
Enter Categories Setup screen.
Using the Pocket PC 2-21
System category screen This category already has these programs that are automatically selected by the system which you cannot move or delete. All relevant information is updated automatically. If no storage card is installed, its icon changes to gray and will be marked with a red X. Change screen orientation.
Categories Setup screen Exit the Categories Setup screen. Tap Phone, PDA or other tabs to select preferred programs. A maximum of 12 programs are allowed for each category. Icons for programs selected under this category. Program selection area: Tap to check the program name to confirm selection. Tap on again to change it back to □ to cancel selection. If it is already checked in other categories, the icon is in gray and you cannot select this item.
2-22
Enter Information on Your Pocket PC
You have several options for entering new information:
1. Use the input panel to enter typed text, either by using the soft keyboard or
other input method.
2. Write directly on the screen.
3. Draw pictures on the screen.
4. Speak into your Pocket PC microphone to record a message.
5. Use synchronization tools to synchronize or copy information from your
desktop computer to your Pocket PC. For more information, see Help on
your desktop computer.
Using the Pocket PC 2-23
Using QWERTY Keyboard
The keyboard layout of this product is standard US keyboard (as used on
PCs). The keyboard is located underneath the screen of the Pocket PC. You
can slide the display to access the keyboard. The screen automatically
switches to landscape display at the same time to facilitate data input in the
Notepad, Word Mobile, Excel Mobile and other applications. The display
automatically switches back to portrait display as you close the keyboard.
Symbols or numbers (blue): By pressing the
function key , you can input the symbols or
numbers in blue indicated on the right upper
section of the keys.
Press to switch to and from lower and upper cases.
Close
Open
2-24
Standard Keyboard
Functions Operation
Lower Case of
Letters
You can input data in the lower case when no
function key is activated.
Upper Case of
Letters
Press , and the indicator will light up.
1. If you want to input the upper case of a letter,
press and then release key, the first letter
you input will be in upper case, while the rest of
will be in lower case.
2. If you want all letters in upper case: Press
key twice to lock the key. Every letter you type
will be in upper case. Press key twice
again to unlock the key.
Numbers or
Symbols
Press , and the indicator will light up.
1. If you want to input a number or symbol: press
and then release key, the first character
you input will be a number or symbol.
2. If you want a series of numbers or symbols:
Press key twice to lock the key. Every
character you type will be a number or symbol.
Press twice again to unlock the key.
Arrow Keys Press arrow keys to move the cursor
to corresponding direction.
If symbols appear on the screen after pressing
the arrow keys, press twice again to
unlock the key and try again.
Using the Pocket PC 2-25
Standard Keyboard
Functions Operation
Delete 1. Press key to delete the character ahead of
cursor.
2. Press key, and then press key to
delete a character after the cursor.
3. Press key twice, and then press
key to delete characters after the cursor
continuously.
Latin 1 Letters Input a letter and press and keys at
the same time. The system will convert the letter
into the corresponding Latin 1 letters. Press both
keys continually until the desired letter appear on
the screen. Release both keys.
Start Menu Press key to cascade the Start menu.
Exit Current
Program
Press key. This is the same function as the
button on the right upper corner.
2-26
Standard Keyboard
Functions Operation
Left Soft-Key
Right Soft-Key
The two hotkeys are located at the top row
of the physical keyboard, above the W, E, 1, 2
keys. You can use these keys to run the function
buttons at the bottom of the screen. For example,
press the Left Soft-Key to run the View function at
the bottom of the operating screen as shown below;
while the Right Soft-Key calls the Menu function.
Moreover, these two hotkeys work exactly the
same as the two hotkeys at the bottom of the
Pocket PC.
Using the Pocket PC 2-27
Enter Text Using the Input Panel
Use the input panel to enter information in any program on your Pocket
PC. You can either type using the soft keyboard or write using Letter
Recognizer, Block Recognizer, or Transcriber. In either case, the
characters appear as typed text on the screen.
To show or hide the input panel, tap the Input Panel button. Tap the
arrow next to the Input Panel button to see your choices.
Select an input method.
Tap to see your choices. Input Panel button.
When you use the input panel, your Pocket PC anticipates the word you
are typing or writing and displays it above the input panel. When you tap the
displayed word, it is inserted into your text at the insertion point. The more
you use your Pocket PC, the more words it learns to anticipate.
2-28
Tap here if this is the right word.
To change word suggestion options, such as the number of words
suggested at one time, tap , Settings, the Personal tab, Input, and
then the Word Completion tab.
Using the Pocket PC 2-29
Type with the Soft Keyboard
1. Tap the arrow next to the Input Panel button and then Keyboard.
2. On the soft keyboard that is displayed, tap the keys with your stylus.
Use Letter Recognizer
With Letter Recognizer you can write letters using the stylus just as you
would on paper.
1. Tap the arrow next to the Input Panel button and then Letter Recognizer.
2. Write a letter in the box.
When you write a letter, it is converted to typed text that appears on the
screen. For specific instructions on using Letter Recognizer, with Letter
Recognizer open, tap the question mark next to the writing area.
Use Block Recognizer
With Block Recognizer you can input character strokes using the stylus
that are similar to those used on other Pocket PCs.
1. Tap the arrow next to the Input Panel button and then Block Recognizer.
2. Write a letter in the box.
When you write a letter, it is converted to typed text that appears on the
screen. For specific instructions on using Block Recognizer, with Block
Recognizer open, tap the question mark next to the writing area.
2-30
Use Transcriber
With Transcriber you can write anywhere on the screen using the stylus
just as you would on paper. Unlike Letter Recognizer and Block
Recognizer, you can write a sentence or more of information. Then, pause
and let Transcriber change the written characters to typed characters.
1. Tap the arrow next to the Input Panel button and then Transcriber.
2. Write anywhere on the screen.
For specific instructions on using Transcriber, with Transcriber open,
tap the question mark in the lower right hand corner of the screen.
Select Typed Text
If you want to edit or format typed text, you must select it first. Drag the
stylus across the text you want to select. You can cut, copy, and paste text by
tapping and holding the selected words and then tapping an editing command
on the pop-up menu, or by tapping the command on the Menu menu.
Using the Pocket PC 2-31
Write on the Screen
In any program that accepts writing, such as the Notes program, and in
the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to
write directly on the screen. Write the way you do on paper. You can edit and
format what you’ve written and convert the information to text at a later time.
Write on the Screen
Tap Menu and then check Draw to switch to writing mode. This action
displays lines on the screen to help you write.
Tap Menu and then check Draw.
Use your stylus like a pen now.
Some programs that accept writing may not have the Draw function. See
the documentation for that program to find out how to switch to writing
mode.
2-32
Select Writing
If you want to edit or format writing, you must select it first.
1. Tap and hold the stylus next to the text you want to select until the
insertion point appears.
2. Without lifting, drag the stylus across the text you want to select.
If you accidentally write on the screen, tap Menu, then Undo and try
again. You can also select text by tapping Menu and then Draw to deselect it
and then dragging the stylus across the screen.
You can cut, copy, and paste written text in the same way you work with
typed text: tap and hold the selected words and then tap an editing command
on the pop-up menu, or tap the command on the Menu menu.
Using the Pocket PC 2-33
Draw on the Screen
You can draw on the screen in the same way that you write on the screen.
The difference between writing and drawing on the screen is how you select
items and how they can be edited. For example, selected drawings can be
resized, while writing cannot.
Create a Drawing
Cross three ruled lines on your first stroke. A drawing box appears.
Subsequent strokes in or touching the drawing box become part of the
drawing. Drawings that do not cross three ruled lines will be treated as
writing.
The drawing box indicates the
boundaries of the drawing.
Tap Menu and then check Draw.
You may want to change the zoom level so that you can more easily work
on or view your drawing. Tap Menu, Zoom and then a zoom level.
2-34
Select a Drawing
If you want to edit or format a drawing, you must select it first. Tap and
hold the stylus on the drawing until the selection handle appears. To select
multiple drawings, tapping Menu and then Draw to deselect it and then drag
to select the drawings you want.
You can cut, copy, and paste selected drawings by tapping and holding
the selected drawing and then tapping an editing command on the pop-up
menu, or by tapping the command on the Menu menu. To resize a drawing,
make sure the Draw function is not selected, and drag a selection handle.
Record a Message
In any program where you can write or draw on the screen, you can also
quickly capture thoughts, reminders, and phone numbers by recording a
message. In Calendar, Tasks, and Contacts, you can include a recording in
the Notes tab. Refer to “Voice Recording Format” section.
In the Notes program, you can either create a stand-alone recording or
include a recording in a written note. If you want to include the recording in a
note, open the note first. In the Inbox program, you can add a recording to an
e-mail message.
Using the Pocket PC 2-35
Create a Recording
1. Hold your Pocket PC’s microphone near your mouth or other source of
sound.
2. Press and hold the Record hardware button on your Pocket PC until you
hear a beep.
3. While holding down the Record button, make your recording.
4. To stop recording, release the Record button. Two beeps will sound. The
new recording appears in the note list or as an embedded icon.
You can also make a recording by tapping the Record button on the
Recording toolbar.
To play a recording, tap it in the list or tap its icon in the note.
Indicates an embedded recording.
Tap to begin recording.
Recording toolbar.
Tap Menu and then check View
Recording Toolbar.
2-36
Voice Commander
By default, the system sets the button on
the side of the Pocket PC as the “Voice
Commander Button.” Press this button
to launch the Voice Commander. For
details on how to use this function,
please refer to the Voice Commander
section.
Voice Commander Button
Voice Command Satellite Navigation 3-1
33 VVooiiccee CCoommmmaanndd SSaatteelllliittee
NNaavviiggaattiioonn //
Navigation Device Installation
Pocket PC
Car Charger (* optional): when Pocket PC is low on power, recharge by
connecting one end to the car cigarette lighter/12 volt power outlet and the
other end to the socket on base of Pocket PC.
Attention: The GPS signal receiver is built into the Pocket PC. If car
windscreen has heat reflective metallic film, or Pocket PC is
obstructed by objects, then the receptivity of the GPS will be
adversely affected.
3-2
GPS Navigation Software Installation
Please follow your car navigation system operating manual’s
instructions on software installation in order to use the navigation function.
Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions:
1. When using this device, please use with matching car mount. Affix device
securely to the car mount. Please be aware that installation in the areas
depicted below is forbidden and is strictly prohibited.
Do not place where it will obstruct driver vision
Do not place over air bag
Do not place where it can not be securely attached
Do not place in path of activated air bag
Voice Command Satellite Navigation 3-3
2. Please set navigation destination before driving. Do not operate this system
while driving.
3. Please use this system with care. If any harm results from careless use of
this system, the responsibility for safe driving resides with the driver.
4. GPS positioning is limited by weather and usage location (tall buildings,
tunnels, underpasses, trees, bridges). Most GPS do not work indoors, nor
can GPS signals penetrate buildings, car sun shades and heat reflective
film with metallic content. Please install GPS outdoors with clear line of
sight. Beneath the windscreen at the front of the car is a common choice,
and the windscreen should be free of heat reflective film.
5. The GPS system is built and operated by the U.S. Department of Defense
which is also responsible for its maintenance and calibration. Any changes
made by them may affect the operation and accuracy of the GPS system.
6. Wireless devices (mobile phones, speed radar detectors) will all interfere
with the satellite signal and cause unreliable signal reception.
7. The GPS position fix is provided only for the driver’s reference and should
not affect actual driver behavior.
8. The electronic map data provided in the navigation system is for normal
reference only and not intended for high precision applications. The user
should determine their exact location based on actual road conditions.
9. The route provided by the navigation system, the audio cues and
intersection data are derived from recommended optimal route calculated
using the electronic map data. This is provided for the driver’s reference
only, the driver should decide their chosen route according to actual road
conditions.
10. When not in use, please do not leave the device inside the car. If exposed
directly to sunlight, the battery may overheat and cause damage to this
device. This may endanger the vehicle as well.
3-4
Satellite Data Update (Not supported in USA)
Tap , Programs, GPS, and then Satellite Data Update.
Login to the provider’s server to download instant satellite data and
enable the GPS function. Note: either of the following connections allows
your Pocket PC to download the latest GPS data. If there is more than one
connection available, the system will automatically select the best connection,
in the following order:
1. Synchronization connection: Connect your Pocket PC to a PC (Desktop
or Notebook). Please note that your PC must be online.
2. Wireless LAN connection.
3. GPRS connection: Roaming mode cannot update GPS data automatically.
If necessary, change to manual mode.
The system will update GPS data
automatically based on a schedule.
Follow these steps:
Check the automatic update
checkbox.
Set the date. Set the time.
The text shows the expiration date
of the GPS data. On the due date,
the system will pop up a warning
message. Refer to the following
instruction about the Today screen.
Voice Command Satellite Navigation 3-5
Tap the Download Button to
update the GPS data manually. The
figure on the left shows how to
download using the
synchronization connection.
Tap the Setting Button in the
Satellite Data Update main screen
to open the dialog in the left figure. Check the expiration checkbox to activate the reminder function on the due date. The default value is checked. The system will automatically update the data when online. Costs will be incurred when connecting over the GPRS, so consider carefully before activating this function.
After setting your Pocket PC to the following connection mode and
activating the automatic update and Internet connection functions, the system
will automatically download the latest GPS information periodically.
1. Synchronization connection. Make sure that your Pocket PC is
connected to the PC, and that the PC is online.
2. Wireless LAN connection.
3. GPRS connection.
3-6
When the GPS data has expired,
the relevant message displays on
the top of the screen.
The icon reminds you that your
GPS data has expired.
Tap the Notification Button to
open the message window. Tap to close the message window.
Voice Command Satellite Navigation 3-7
Location SMS
Tap , Programs, GPS, and then Location SMS.
You can utilize the GPS function offered by your Pocket PC, to send the
matching location automatically found by this program and the necessary
message to your contacts. This could be helpful in preventing kidnapping,
reporting disastrous situations, calling for help in emergencies or locating an
individual. In addition, we have formulated many SMS templates based on
different situations for your convenience.
1. It is better to execute this program
at a location with clear signal.
Tap to open the Contacts screen, if
set up in advance, you can choose
contacts directly.
You can directly enter mobile
phone number in the To area. If
there is more than one recipient,
please use “;” to separate
recipients.
You can directly enter your message in this area, such as landmarks,
features or street names.
Automatically searches for GPS information.
Tap to allow you to select, add, edit, or delete your most used messages. Tap to allow you to send SMS messages and report your location.
3-8
2. Select in the main screen,
once in the screen shown on the
left, tap on any message and tap
OK Button to select.
Further, by pressing and holding
anywhere on the screen, together
with the pop-up menu, you can
add, edit or delete your most used
messages.
3. The content of the message that
your recipient views looks similar
to what is shown on the left. Actual
messages differ depending on the
recipient’s device.
Voice Command Satellite Navigation 3-9
GPS Viewer
Tap , Programs, GPS, and then GPS Viewer.
You may use this Pocket PC to automatically search the GPS
coordinates of your location and check if the GPS functions work properly.
1. Run this program in a location with good signal reception. Greenwich Mean Time (GMT): After connecting to a satellite and obtaining the GMT, it will be displayed on the screen. Tap to set the satellite time as the system time. Report GPS tracking information. Tap to change the unit. Switch to Satellite mode.
2. Tap Satellite to switch to Satellite mode. Red: Satellite detected (In View). Blue: Satellite data detected (Data Valid). Green: Tracking completed (Tracker). Signal strength: The larger the figures, the stronger the signal. Satellite ID: The IDs expressed in numbers in this field correspond to the IDs on the earth image above. Switch to Compass mode.
3-10
Using the Phone 4-1
44 UUssiinngg tthhee PPhhoonnee //
The Phone feature on the Pocket PC allows you to perform the
following tasks:
3.5 G video telephony. ( Applies to M810)
Make and receive calls.
Quickly make calls or listen to voice mail without entering phone numbers
using Contacts, Speed Dial, or your Call Log.
Check the Call Log to see who has called, whom you have called, add a
new number to Contacts, and access notes taken while you were on a call.
Receive calls and easily take notes during the call.
Send SMS messages.
Customize how your phone rings.
To switch to the Phone function, press the button on the lower part
of the Pocket PC or tap and then Phone.
Caution! To avoid distraction and affecting driving safety, never use your Pocket PC while driving an automobile or any other moving vehicle.
Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on before you use the functions described in this section.
When aboard an aircraft, at a medical facility, or at the gas pump where wireless communication devices are prohibited, please launch the Wireless Manager and then tap the button. When the color of the icon turns orange , the Flight Mode is activated and the wireless connection of the Pocket PC is disabled.
The Phone function relies on the Pocket PC main battery for power. Maintain the main battery power level to assure call quality and the normal operation.
4-2
Installing and Removing the SIM Card
1. Before installing the SIM card, launch Wireless Manager, then tap the
button. When the color of the icon turns orange , this indicates
that the wireless connection of the Pocket PC is disabled.
2. Press the “Power Button” of the Pocket PC to turn off the screen.
3. Installing the SIM Card
Turn over your Pocket PC and remove the back cover. Please pay attention
to the direction of the missing corner of the SIM card, and then insert the
SIM card into the slot.
4. Installing the Battery
Place the battery in the back of Pocket PC. Make sure that the golden
contacts are aligned to the battery box; gently insert the battery until it
clicks. Then replace the back cover.
Using the Phone 4-3
Using the Phone
Microphone Earphone Phone Receiver Phone Speaker (Bottom of Pocket PC)
Combination
Method Operation Answer or End a Call
Adjust Earphone Volume
Hold the Pocket PC manually for calls
Hold the Pocket PC and position the receiver close to your ear and the speaker close to your lips.
Press Send Button or End Button on the lower part of the Pocket PC.
While answering a call, push the volume control key on the side of the Pocket PC to test the earphone volume.
Install the external headset
Place the earphone in your ear and position the microphone to your lips.
The Bluetooth headset does not support the following functions.
Use the in-line control button on the microphone for the following:
1. Incoming call: Quickly press to answer the call.
2. Incoming call: Press and hold to reject the call.
3. During a call: Press and hold to hang up.
4. During a call: Quickly press for call waiting; press again to cancel call waiting.
--
4-4
Adjusting the Phone Volume
Tap on the top and adjust all programs’ sound functions under
. Adjust the phone sound volume under .
1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon Tap and then to adjust the ring volume of the incoming call.
2. Push the volume control key on the side of the Pocket PC or tap and then to adjust the phone volume. You can only do this during a call.
3. Vibration mode: The speaker icon on the top changes to .
4. Mute mode: The speaker icon on the top changes to .
Here is how to adjust the proper volume: 1. If earphones are used with the Pocket PC to make calls, set the volume
according to actual personal needs. 2. If earphones are not used with the Pocket PC and not held close to the ear
for calls but similar to hands-free operation, it is recommended to set the sound volume for the top two levels.
3. For holding the Pocket PC close to the ear directly for calls, it is recommended that you set the volume to the lower four levels. It is recommended not to use the top two levels because the volume is high and may affect your hearing.
Turn on or turn off the speakerphone: 1. Enable the speakerphone: While answering a call, tap Speaker on to turn
on. 2. Disable the speakerphone: Tap Speaker off to turn off.
Using the Phone 4-5
Turning the Phone On or Off and Making Calls
Comparison of Product Features
Only the M810 has a video conference camera. The M750 does not
support the video conference camera and the related features; otherwise it
is identical in appearance to the M810.
The Speed Dial Button on the Phone main screen only applies to the
M750.
Camera for Video call
Adjust earphone volume
Rear side: The SIM card is located
below the battery.
Send Button End Button
4-6
1. Turn on the phone
On the Today screen, tap to
launch Wireless Manager. Or tap the icon. When the
message window appears, tap
“Wireless Manager.”
Tap to enable GSM. Input the PIN and wait for the
phone to turn on.
changes to .
And the icon changes to .
2. Dial: Press to enter the Phone screen. Use the stylus to tap the
telephone number and then tap the Talk Button.
3. Answer a call: Press .
4. End a call: Press . 5. Turn off the phone
On the Today screen, tap to launch Wireless Manager.
Tap to disable GSM.
Using the Phone 4-7
Video Call ( Applies to M810)
If both parties of the call wish to enable the instant video
communication function, the person you are calling must be equipped with a
video enabled mobile phone and service system. Are you ready? Smile and
say “Hello,” when you start a video call.
1. First select your contact or enter the
number to call, and then tap the
Video Call button.
2. To end the call, simply tap on
the Video Call main menu. Don’t
forget to say goodbye.
3. Video Call main menu.
Call status. (Defaults) Video window for your
contact. (Defaults) Video window for
yourself. Toolbar for Video Call.
Provides the relevant menu.
For example, select Video Call
Options to modify the display
picture, ring tone etc. Return to the voice call keypad.
4-8
Icon Meaning
Set the contrast level.
Accept or hide the video information of the callee.
Use either front camera, rear camera, or close the camera.
Mute or turn on the sound.
Switch the video window display method.
End call.
Important!
If the video call dial out is unsuccessful, it is possible to switch to normal
voice calls.
are icons related to connection features. They are
shown according to your monthly plans, telecom service provider, and
network distribution conditions or effective system coverage area. To
make modifications to your monthly plans, please contact your telecom
service provider.
Using the Phone 4-9
Toolbar
Smart Dialing: Enter the portion you remember and the system will use the fuzzy comparison method to list the matching contacts at area
on the figure. Please refer to the keyboard shown on the screen to enter information including the phone number and letters. Tap a contact to view contents. Provides the relevant menu. For example, select Options to change the phone setup such as ring tone, vibration mode, PIN code, etc. Or select Send Text Message to send SMS message. Hide Keyboard Button: Tap to expand the contacts display area, and then tap Keyboard Button to restore the keyboard.
Speaker on Button: While answering a call, tap to enable the speakerphone. Keypad Button: Tap to return to the keypad.
4-10
The following table shows the icons that you may see on the Navigation
Bar on the top of the screen.
Signal Indicator Description
SIM card unavailable.
The phone is turned off. To turn it on, tap this icon.
Network is searching or unavailable.
Phone connection unavailable or network error. To turn
it off, tap this icon.
The phone is turned on and signal reception is normal.
To turn it off, tap this icon.
Active call. To switch back from other programs, tap
this icon.
Call forwarding active
Calls are forwarded
Missed call
Roaming mode
Using the Phone 4-11
Call from Contacts
Phone numbers entered in Contacts can be used to quickly locate phone
numbers and make calls.
1. In the contact list, tap and hold the
contact to display a pop-up menu.
2. Tap Call Mobile or Call Work on
the pop-up menu.
3. Tap a contact to display the details.
Call from Speed Dial ( Applies to M750)
On the Phone screen, tap Speed Dial Button to enter the following
screen.
Tap and hold on a certain contact. The pop-up menu provides the Delete and Edit options for phone setup. Tap to redial this number. Remember that this code (for example, “2”) you want to dial can also be dialed from the number area in the Phone screen by tapping on “2”. Tap Menu and then New to show the Contacts list. Tapping a Contacts name and number will add it to the Speed Dial list. A maximum of 99 numbers are allowed.
4-12
Call from the Call History
Tap Call History Button on the Phone screen to enter the following
screen.
Tap Menu and then Filter to list the categories. To search, tap By Caller and follow the screen instructions to complete the operation. Tap this icon to redial this number immediately. Tap and hold the phone number area and tap the option you need on the pop-up menu. For example, tap Call to redial this number, tap Save to Contacts to add this number to the Phonebook. Tap Menu and then Delete All Calls to delete all call records. Or tap Call Timers to view the number of calls, call time and manage call records as shown in the figure on the left.
Using the Phone 4-13
Customize Your Phone
Tap Menu, Options, and then the Phone, Services, Network… tabs to
modify the relevant service setup. Note that the setup values you can change
here depend on the services provided by your telephone company.
Tap Menu, Options, and then the Phone tab.
You can set the ring type as ring,
vibration or mute.
If you want to use a customized
ring tone file, use the
synchronization program on your
desktop computer to copy the .wav
ring tone file to the
/Windows/Rings folder on the
Pocket PC. You can then select this
ring tone from the Ring tone list.
Set the key sound for dialing.
You can set a PIN (Personal
Identity Number) to block
unauthorized access to your phone.
Your first PIN is provided by your
phone service provider.
4-14
Tap Menu, Options, and then the Appreciation software tab.
1. Make sure that you have checked
“Zoom SMS.” When you receive
an SMS, a large mail icon will
appear on the upper right of the
Today screen, and you can open
your newly received message by
tapping on this icon.
2. If you check “Call Filter,” the
representing icon will appear on the
lower right of the Today screen.
Add Ringtone
Tap , Programs, Phone, and then Add Ringtone.
1. All of the music files stored in your Pocket PC or storage card will be listed, please select the new ringtones which you would like to add.
2. Tap Add Ringtone Button, then you can enter the Phone tab for telephone environment settings and select your ringtone files from the Ring tone list.
Using the Phone 4-15
Phone Application Programs
Caution!
Before you can use the functions described in the Phone Group. Make sure
that the SIM card is properly installed in your Pocket PC and the Phone is
already turned on.
SIM Manager
If your Pocket PC does not include this function, it means it is not
supported and you can skip this chapter.
Tap , Programs, Phone, and then SIM Manager.
Standard Display
SIM Manager manages the SIM Phonebook and duplicates the
Phonebook entries.
SIM Phonebook Name or Pos.: Tap on the title of the columns, and when the ▲▼
button appears it is possible to sort. Tap and hold a Phonebook entry to duplicate it to Contacts. Contacts: The contact’s mobile number will be displayed in this column. If none is available, then the office number will be displayed. Tap and hold a Contacts entry to duplicate it to the SIM Phonebook.
4-16
The following are the shared functions for standard screen or full screen
display:
Menu Button: Provides the appropriate function table.
SMS Management: Enter the SMS management screen.
New SIM Contact: Add a new phonebook entry to the SIM card. Refresh: Tap to refresh the displayed contacts and SIM card information,
after the Contacts are updated. Standard Button: Provides Standard, SIM, Contacts three switching
modes.
Full-Screen Display
When switching to full screen display, the full screen display for SIM
card phonebook or Contacts will be as shown as per the illustration below.
This will enable the phonebook contacts to be easier to read and more precise
management can be conveniently performed.
1. Tap and hold a Phonebook entry.
Then, tap Dial on the pop-up menu
to call this contact.
2. Choose Send SMS from the list, to
enter the preparation screen for
sending SMS.
3. Tap and hold a Phonebook entry to
be duplicated. Then, tap Copy to
Contacts on the pop-up menu to
copy to Contacts.
Using the Phone 4-17
Copy Phonebook Information
The function descriptions of this section are for standard screen and
fullscreen display. Copying phonebook information between the SIM card
and Contacts is either by “select one, select multiple, or select all” methods.
For precise management of your phonebook that can be conveniently
performed.
Select all
Select one
Select multiple
Tap on the □ in the title to select
all.
Tap on the □ in front of a
phonebook data entry to select this
singl entry.
It is also possible to select multiple
phonebook data entries.
In the SIM Phonebook area, tap
and hold the selected phonebook
data to select the function and copy
to Contacts.
In the Contacts area, tap and hold
the selected phonebook data to
select the function and copy to
SIM Phonebook.
4-18
SMS Management
Tap Menu and then SMS Management to enter the SMS management
screen and to display the original SMS contents on the SIM card.
Double tap the number in the Pos.
column to view the corresponding
SMS contents.
Tap the SMS you want to delete.
When it is highlighted, tap Del
selected SMS Button to delete this
message from the SIM card.
Return to the SIM Manager
screen.
Using the Phone 4-19
SIM Value Add Service
Tap , Programs, and then SimTKUI (SIM Tool Kit).
Please install the SIM card that supports the SIM Toolkit function and
the appropriate application will show up in Programs. Furthermore, the
name of the application shown will differ from the services provided by the
telecom service provider.
This screen is for reference only.
The actual screen is based on the
service items provided by your
telecom company.
Tap any service item.
Select Button: Launch service item.
Follow the screen or voice
instructions.
4-20
SMS Sender
Tap , Programs, Phone, and then SMS Sender.
Tap , Messaging, and then New.
Press to bring up the Phone screen. Tap Menu and then Send Text
Message.
Enter the composing SMS screen in Messaging.
“Text Messages” means you are
editing SMS.
Input the mobile phone number.
Input the messages you want to
send.
Tap Menu and then My Text to
select canned messages or to edit
your Text Messages.
Tap to send SMS message.
Using the Phone 4-21
Speed Dial
Tap , Programs, Phone, and then Speed Dial.
Hot Key Switch
Tap the box according to the
functions provided by the system.
Tap to switch between these
functions: Frequency Dial →
Index Dial. Tools Button: Provides the relevant
menu. For example, select Settings
to set the interface as Frequency
Dial or Index Dial. Select Sound
on/off to set the sound for tapping
the screen.
Tap Tools and then Color and
Text to enter the Setting screen
shown on the left. You can set the
text font, text color and button
background color according to your
personal preferences.
Font
Text color
Button background
Preview area
4-22
Frequently Dialed Screen
Frequency Dial screen
Tap any phone entry box to speed
dial.
Tap and hold the box, then select
appropriate command from the
pop-up menu.
Sort according to the number of
calls in descending order. The
upper left corner has the most
number of calls while the lower
right corner has the least number.
: Tap to view the previous or
next page.
Tap to switch to the Frequency
Dial screen as shown on the left.
Using the Phone 4-23
Index Dial
Index Dial screen
Switch to the Index Dial screen as
shown on the left.
Tap on any letters. The content
displayed are the data created in
Contacts. If you did not create any
data in Contacts, the screen is
blank.
The letter “F” appears on the upper
left side of the screen (see left).
This indicates that this page
contains all address data that starts
with “F”. The English Address
Book is arranged alphabetically
using the First Name.
Tap any box to speed dial.
: Tap to view the previous or
next page.
4-24
Call Filter *
Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs.
Tap , Programs, Phone, and then Call Filter.
Tap Options and then New to add
a new Block List.
Tap and hold an entry in the list.
Select from the pop-up menu to
manage the list according to your
needs. Tap Options and then New to add
a new Allow List.
Tap and hold any entry in the list to
display the pop-up menu.
Provides the relevant menu. New: Add a New List. Block Record: Blocked call records. Block Settings: Incoming call settings. Other Config.: Block Record settings. Synchronize: Tap Options and then Other Config. to activate synchronization. The system will synchronize the names according to the current Contacts entries but without updating the phone numbers.
Find: Helps you find entries conveniently if there are lots of entries in the list.
About: Information about Call Filter. Provides SMS and Tel modes.
Using the Phone 4-25
Tap Options and then New to enter
the screen shown on the left.
Input name and telephone number.
Add to Tel List or SMS List.
OK Button
Cancel Button
Tap and hold a contact in the
Contacts screen. Select Add to
Call Filter from the pop-up menu
to add a new entry to the Block
List.
Tap Options and then Other
Config..
Block Record Settings tab: Select
keeping time.
Synchronize tab: Activate
synchronization.
Status tab: Activate or deactivate
the Status icon on the lower right of
the Today screen. If activated, the
icons or will
show. Tap to view the filter status.
4-26
Tap the icon or on the lower right of the Today
screen to display the Call Filter Status window.
Display Call Filter setting status.
Tap to hide the Call Filter Status
window.
Customize Your Pocket PC 5-1
55 CCuussttoommiizzee YYoouurr PPoocckkeett PPCC //
You can adjust the Pocket PC settings according to your personal
preferences and install other programs.
Adjusting Settings
To see available options, tap , Settings, then the Personal or
System tab located at the bottom of the screen. The following utilities allow
you to adjust the settings based on your personal work style.
Clock & Alarms, to change the time or to set alarms
Menus, to customize what appears on the menu, and to enable a
pop-up menu from the New button
Owner Information, to enter your contact information
Lock, to limit access to your Pocket PC
Power, to maximize battery life
Today, to customize the look and the information that is displayed on the
Today screen
5-2
Notifications
Your Pocket PC reminds you in a variety of ways when you have
something to do. For example, if you’ve set up an appointment in Calendar,
a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be
notified in any of the following ways:
A message box appears on the screen.
A sound, which you can specify, is played.
A light flashes on your Pocket PC.
The Pocket PC vibrates.
To choose reminder types and sounds for your Pocket PC, tap and
then Settings. In the Personal tab, tap Sounds & Notifications. The options
you choose here apply throughout the Pocket PC.
Customize Your Pocket PC 5-3
Power Preference Settings
Tap , Settings, the System tab, and then Power.
View the power usage condition or perform the relevant power
management settings.
Power icon
Check this item, so that when you
accidentally press the hardware
buttons on the Pocket PC, the
Pocket PC will not exit the sleep
mode. This will prevent
unnecessary power consumption if
a button is being pressed
accidentally and not being
discovered in time.
Checking this item displays the
power icon on the upper right side
of the screen.
Advanced tab: Set the Pocket PC
to turn off automatically after a
period of inactivity.
5-4
Backlight
Tap , Settings, the System
tab, and then Backlight.
1. Battery Power or External Power
tab: Set the relevant backlight
functions.
2. Backlight Level tab: Adjust the
backlight level.
Customize Your Pocket PC 5-5
Microphone
Profile Microphone Cause
* Voice
Commander
voice control
Turn the volume down and find
the proper volume setting for
better recognition of system.
Surrounding
interference recorded
when volume up.
Speech
recording
Turn the volume up. More distance from the
lecturer more
interference recorded.
* Used for the version built in “Voice Commander.”
Tap , Settings, the System
tab, and then Microphone.
1. Use the slider to adjust volume of
the recording mic.
2. Default Button: Restore to default
system settings.
This document lists the functions, specifications, and illustrations for
reference only. The actual purchased product should be taken as the
standard.
5-6
Headset Volume Limiter
In order to protect the hearing of the user from excessive headset
volume, this product is specially designed for this purpose. You will be able
to configure the maximum volume output from the headset, making the
maximum decibel the limit when adjusting the volume for headset reception.
Tap , Settings, the System
tab, and then Headset Volume
Limiter.
1. Slider: Configure the maximum
decibel for the headset output
volume.
2. Default Button: Restore to default
system settings. We wish to remind
you not to set the headset volume
higher than the recommended
default value to prevent damage to
your hearing.
Customize Your Pocket PC 5-7
Adjust Volume
Push the volume control key on the side of the Pocket PC. Or use the
stylus to tap the icon on the top of the screen to adjust all program sound
functions under . Adjust the incoming call’s volume under .
1. Adjust volume: When set to
On, use the stylus to tap and drag
the slider up and down to adjust the
volume. You can also push + or -
on the side of the Pocket PC.
2. Vibrate: Under Vibrate mode,
the sound function of all programs
will be replaced by vibration,
including incoming call rings. The
icon on the top changes to
3. Mute: Under Off mode, the
sound function of all programs will
be turned off, including incoming
call rings. The icon on the top
changes to .
5-8
Scenarios
Tap , Programs, Phone, and then Scenarios.
Select an applicable mode.
Details Button: Set the relevant
options for this mode, such as
volume, backlight, etc.
Tap Details Button to enter the
screen shown on the left. And then
tap Settings Button to set the
relevant options for this mode, such
as volume, backlight, etc.
Customize Your Pocket PC 5-9
Task Manager
On the Today screen, tap Task Manager.
Tap , Programs, Utilities, and then Task Manager.
Stop programs you are not currently using to free memory on your
Pocket PC.
Advanced mode.
Quit from Task Manager. Stop the program you selected. Tap to activate the selected
program.
Display with Wizard mode or
Advanced mode.
Stop all programs.
Page up or page down. Tap Task Manager on the
Today screen.
Wizard mode.
Tap to activate the selected
program. Display with Wizard mode or
Advanced mode. Stop all programs.
Tap and hold an icon from area,
and then drag into garbage can to
stop this program.
5-10
Find and Organize Information
The Search feature on your Pocket PC helps you quickly locate
information.
1. Tap , Programs, and then
Search. Input the text you want to
find and then select the data type.
Tap on Search to start the search.
2. To find information that occupies a
larger space, select Larger than 64
KB for Type.
Actually, you can use File Explorer to search for files and place these
files into folders systematically. Just tap , Programs, and then File
Explorer.
Tap to change folders.
Select the sort order for the list.
Tap the folder name to open folder.
Tap Menu and then New Folder to
create a new folder.
You can move files in File Explorer by tapping and holding the item you want to move, and then tapping Cut or Copy and Paste on the pop-up menu.
Customize Your Pocket PC 5-11
Navigation Bar and Command Bar
The navigation bar is located at the top of the screen. It displays the
active program and current time, and allows you to switch to programs and
close screens.
Use the command bar at the bottom of the screen to perform tasks in
programs. The command bar includes menu names, buttons, and the Input
Panel button. To create a new item in the current program, tap New. To see
the name of a button, tap and hold the stylus on the button. Drag the stylus
off the button so that the command is not carried out.
Tap to change volume or mute the
Pocket PC.
Tap to select a program.
Tap to quickly select a program
you have recently used.
Tap to see additional programs.
Tap to customize the Pocket PC.
Menu button.
Input panel button. New button.
5-12
Pop-up menus
With pop-up menus, you can quickly choose an action for an item. For
example, you can use the pop-up menu in the contact list to quickly delete a
contact, make a copy of a contact, or send an e-mail message to a contact.
The actions in the pop-up menus vary from program to program. To access a
pop-up menu, tap and hold the stylus on the item name that you want to
perform the action on. When the menu appears, lift the stylus, and tap the
action you want to perform. Or tap anywhere outside the menu to close the
menu without performing an action.
Tap and hold to display the pop-up
menu.
Lift the stylus and tap the action
you want.
Tap outside the menu to close it
without performing an action.
Customize Your Pocket PC 5-13
Redefine Hot Keys
Tap , Settings, the Personal tab, and then Buttons.
Button 1 Button 2 Left Soft-Key Right Soft-Key
These hot keys can be redefined as
launch keys for frequently used
programs.
End Button and Send
Button are exclusive phone
functions so they cannot be
redefined.
5-14
Synchronization 6-1
66 SSyynncchhrroonniizzaattiioonn //
Windows Vista Part
A PC with Windows Vista™ operating system can be used to enable
connection and synchronize with your Pocket PC. The Windows Mobile®
Device Center application can be used to manage your Pocket PC, and can
provide Pocket PC access to other resources through the connected PC. The
online services and application access can also keep the Pocket PC up-to-date
with the connected PC. For example, if you make a modification to the
Pocket PC, then this modification will be automatically applied to the
appropriate information on the computer during the next synchronization, and
vice versa. This way, the latest data can be ensured to be available no matter
which computer is being accessed.
Important Installation Notice
Before you install Windows Mobile® Device Center, make sure that the
USB cable on the Pocket PC is not connected to the personal computer.
Connect the USB cable only after Windows Mobile® Device Center is
installed.
6-2
1. Software installation: You could use the Getting Started CD to install
Windows Mobile® Device Center on the personal computer.
2. Hardware installation: The USB cable is a plug-and-play device. Use the
USB cable to connect your Pocket PC to your personal computer.
3. Using Windows Mobile® Device Center
After installation is complete, the Setup Wizard helps you customize your
synchronization settings.
Once you use the USB cable to connect the two devices properly, the Set
Up a Partnership screen appears on the personal computer. Set it up
according to your requirements. The green icon appears on the status
bar of your personal computer to indicate that it is Connected.
USB Port
Synchronization 6-3
Windows XP/2000/98 Part
A PC with Windows XP/2000/98 operating system can be used to enable
connection and synchronize with your Pocket PC. Using Microsoft®
ActiveSync®, you can synchronize the information on your desktop computer
with the information on your device. Synchronization compares the data on
your device with your desktop computer and updates both computers with the
most recent information. For example:
Keep Pocket Outlook data up-to-date by synchronizing your Pocket PC
with Microsoft Outlook data on your desktop computer.
Synchronize Microsoft Word and Microsoft Excel files between your
Pocket PC and desktop computer. Your files are automatically converted
to the correct format.
By default, ActiveSync does not automatically synchronize all types of
information. Use ActiveSync options to turn synchronization on and off
for specific information type.
With ActiveSync, you can also:
Back up and restore your Pocket PC data.
Copy (rather than synchronize) files between your device and desktop
computer.
Control when synchronization occurs by selecting a synchronization mode.
For example, you can synchronize continually while connected to your
desktop computer or only when you choose the synchronize command.
Select which information types are synchronized and control how much
data is synchronized. For example, you can choose how many weeks of
past appointments you want synchronized.
6-4
Installing and Using ActiveSync
Important Installation Notice
Before you install ActiveSync, make sure that the USB cable on the Pocket
PC is not connected to the personal computer. Connect the USB cable only
after ActiveSync is installed.
1. Installing ActiveSync: You could use the Getting Started CD to install
Microsoft ActiveSync version 4.5 or above on the personal computer.
ActiveSync is already installed on your Pocket PC.
2. Hardware installation: The USB cable is a plug-and-play device. Use the
USB cable to connect your Pocket PC to your personal computer.
USB Port
Synchronization 6-5
3. Using ActiveSync
After installation is complete, the ActiveSync Setup Wizard helps you
customize your synchronization settings.
Once you use the USB cable to connect the two devices properly, the Set
Up a Partnership screen appears on the personal computer. Set it up
according to your requirements. The green icon appears on the status
bar of your personal computer to indicate that it is Connected.
Click Explore on the Microsoft ActiveSync on the personal computer to
access files in the Pocket PC. Just like using a personal computer, manage
the files in the two devices.
6-6
FAQ About Synchronization
Tap , Settings, the Connections tab, and then USB to PC.
1. Factory setting defaults to checking
the box.
2. If you have followed the above
installation and operation
procedures and find that the
connection between your Pocket
PC and desktop PC still cannot be
established, please uncheck the box
shown on the left.
USB Synchronization
Before you start to synchronize, use the Pocket PC Getting Started CD
to install synchronization tools on your personal computer. For more
information on how to install, please refer to the Pocket PC Getting Started
CD or online help. Synchronization tool is already installed on your Pocket
PC.
Synchronization 6-7
ActiveSync synchronization settings:
1. After installation is complete, the Setup Wizard will continue to guide you.
Adjust the specifications according to your actual needs.
2. Use the USB cable to connect the two devices properly and the Set Up a
Partnership screen appears on the personal computer. Set it up according to
your requirements.
Click OK.
Click Next.
Check the items you want
to synchronize.
Click Next.
6-8
Click Finish.
After installation is complete, the ActiveSync Setup Wizard helps you
connect your Pocket PC to your desktop computer, set up a partnership so
you can synchronize information between your Pocket PC and your
desktop computer, and customize your synchronization settings. Your first
synchronization process will automatically begin when you finish using
the wizard.
The green icon appears on the status bar of the personal computer to
indicate that it is Connected.
After your first synchronization, take a look at Calendar, Contacts, and
Tasks on your Pocket PC. You’ll notice that information you’ve stored in
Microsoft Outlook on your desktop computer has been copied to your device,
and you didn’t have to type a word. Disconnect your Pocket PC from your
computer and you’re ready to go!
Synchronization 6-9
Synchronization Tool on Pocket PC
Once you have set up ActiveSync and completed the first
synchronization process, you can initiate synchronization from your Pocket
PC. To switch to ActiveSync on your Pocket PC, tap , and then tap
ActiveSync.
For more information on how to use ActiveSync on your personal
computer, run ActiveSync and refer to the ActiveSync online help. To learn
more about the Pocket PC ActiveSync, switch to ActiveSync and tap
and then Help. Just refer to the Help for more information.
After the synchronization is completed, tap Calendar, Contacts, and
Tasks on the Pocket PC to view if the information saved in Microsoft Outlook on the personal computer is already copied to the Pocket PC.
On the Pocket PC site: Tap ,
Programs and then ActiveSync
View synchronization status.
View connection status.
Tap to connect and synchronize.
Tap to synchronize via Bluetooth
or change synchronization settings.
6-10
Synchronizing using Bluetooth
Without using the USB cable to connect the two devices, you can still
synchronize using Bluetooth. The greatest advantage is that you don’t have to
plug in and detach from the USB cable so often. This is especially useful for
managing several Pocket PCs. For details on Bluetooth devices, refer to
“Using Bluetooth” section.
Connections 7-1
77 CCoonnnneeccttiioonnss //
Connecting to the Internet
This section teaches you how to use GPRS wireless network connection.
GPRS wireless networking is a convenient function for working at home or
while traveling. You can use the Pocket PC to browse websites and read or
send E-mails, SMS or MSN messages.
Make sure that your telecom company provides this service and apply
for a SIM with GPRS function. If you already have a SIM card, all you need
to do is apply for the GPRS function from your service provider. Current SIM
cards can support GPRS networking functions.
Connection Wizard
Generally, you will only need to install the SIM card to your Pocket PC
to simultaneously use the mobile phone functions. The system will
automatically add the connection items for this SIM card. To verify: Tap ,
Settings, the Connections tab, Connections, and then “Manage existing
connections,” the list will show the newly added network name.
If the system is unable to successfully add the connection to your SIM
card, it is possible to use Connection Wizard.
7-2
Tap , Settings, the Connections tab, and then Connection Wizard.
1. Select the country name from the
list.
2. Select the carrier name from the
list.
3. According to actual requirements,
select the carrier name, and then tap
Add Button or Edit Button. Or use
the New Button to add the new
network connection.
4. Search Button: Detect the currently
available telecommunication
service. If it is found, use the Add
Button to add the highlighted
selection. If it is not found, the
“New network” screen will be
shown; please manually setup the
network.
5. Recovery Button: Restore to the
original setup value.
6. Tap , Settings, the
Connections tab, Connections,
and then “Manage existing
connections,” the list will show the
newly added network name.
Connections 7-3
Setting the GPRS Connection
Tap , Settings, the Connections tab, Connections, and then the
Tasks tab.
1. As shown in the screen on the left
tap “Add a new modem
connection.”
2. Enter the “Make New Connection”
screen as shown in the screen on
the left.
Input a new connection name for
convenience in making connections
in the future.
Select “Cellular Line (GPRS).”
Lastly tap Next.
7-4
3. Input the Access Point Name
provided by your telecom company
and tap Next.
4. Input your personal information
such as account number, and tap
Finish.
Connections 7-5
Starting GPRS Connection
1. Turn on Phone: Tap or
icon at the top of the screen and tap
“Wireless Manager.” Tap and
input your PIN to enable GSM. The
icon will change to while
the icon changes to .
2. Tap in the Wireless
Manager. When it becomes ,
the GPRS connection is available.
3. Tap , then tap Settings to link to
Connections. You are ready to
connect GPRS.
are icons
related to connection features. They
are shown according to your
monthly plans, telecom service
provider, and network distribution
conditions or effective system
coverage area.
7-6
4. Connect GPRS: Select “Manage
existing connections” in
Connections. Tap and hold on the
newly created connection name,
and then select Connect to finish
GPRS connection.
5. Input your account information in
the Logon Network screen and tap
to login to the network.
6. After the connection is established,
the icon will change to .
7. Now you can use the appropriate
program to access the Internet,
receive or send E-mails, etc.
Disconnecting GPRS
1. Disconnect GPRS: Tap and
the message window appears. Tap
Disconnect.
2. Turn off Phone: Tap and then
“Wireless Manager.” Tap to
disable GSM.
Connections 7-7
GPRS Settings
Tap , Settings, the Connections tab, and then GPRS Settings.
Please note that this setting will differ with the security authentication
method provided by your telecom service provider; contact your service
provider before making any changes.
Configure the security
authentication method for the
GPRS connection.
7-8
Band Selection ( Applies to M810)
Tap , Settings, the Connections tab, and then Band Selection.
Please configure the band type based on your service plan of your
service provider; ask your service provider before making any changes.
If AUTO is chosen, the system will
select the band to use based on the
telecom and network configuration.
Connections 7-9
Using Bluetooth
Bluetooth is a short-distance wireless communication technology with
an effective range under 10 meters (30 feet). When the Bluetooth power is
turned on, the indicator will blink blue.
Bluetooth capable devices such as the PC, Pocket PC, Bluetooth headset
etc. can be connected to this product for the convenience of data sharing.
1.Tap to launch Wireless Manager.
2.Tap to enable Bluetooth.
Bluetooth LEDindicator (Blue)
7-10
Setup the Bluetooth Connection
On the Wireless Manager screen, tap and hold the button, then
release to enter the Bluetooth manager.
Tap , Settings, the Connections tab, and then Bluetooth.
Tap Bluetooth and then Devices
tab.
1. Select “Add new device” and the
system will begin to search for
nearby Bluetooth devices.
2. The search results will be similar to
the screen to the left. Select the
device to connect with the list.
All Bluetooth devices found nearby
the system.
This icon indicates a Bluetooth
headset. Refresh Button: Search again to
look for additional Bluetooth
devices to connect with.
Select any device to connect with,
and then tap Next to follow the
onscreen instructions.
Connections 7-11
Pair for Bluetooth headset: When the system asks for the password,
please refer to the instructions provided with your purchased Bluetooth
headset.
Pair for PC or Pocket PC: When the system asks for the password,
please make sure that the identical password is entered to both devices.
3. Your Pocket PC connected with
these devices will be able to
transfer data, receive calls on a
Bluetooth headset, and other
applications.
Successfully connected devices
will be shown as on the screen to
the left.
Tap and hold a device, for example
the Bluetooth headset, then select
Set Hands-free to be able to use
the Bluetooth headset to receive
calls.
4. The screen to the left is during a
call.
Phone screen during a call will
show a headset icon in the upper
right corner, the Bluetooth headset
will be used to communicate with
the callee.
7-12
Tap Bluetooth and then Mode
tab.
5. Configure the Bluetooth related
options for your Pocket PC.
Tap , Settings, the Personal
tab, and then Owner Information.
Enter the name that you wish to
show in the Name field. At the
same time, other Bluetooth capable
devices can recognize your Pocket
PC by this name.
Checkmarking the “Make this device visible to other devices” option will
enable all Bluetooth capable devices within the 10 m (30ft) effective range
to detect your Pocket PC, and transmit data with the proper authentication. If the “Make this device visible to other devices” option is not selected,
your Pocket PC can send data to other devices but other devices will not be
able to detect your Pocket PC.
Tap Bluetooth and then COM
Ports tab.
6. Follow the onscreen instructions to
register the connected Bluetooth
device as an effective COM port.
Connections 7-13
Internet Sharing
Tap , Programs, and then Internet Sharing.
This function provides a simulated modem function for the Pocket PC to
connect to the PC. The built-in Bluetooth paring or USB port can be
connected with the PC and provide Internet access on the PC.
1. The USB connection is used as an
example.
2. Complete the connection setup
between the Pocket PC and PC. The
network connection and
configuration can be attained from
your telecom service provider.
3. Tap Connect and wait for the
system to complete the connection.
4. This screen is only for reference as
the actual connection method will
depend on the Bluetooth paring or
USB port; the connection
configurations can be referenced
from your telecom service provider.
The fees will be decided by the
service provider.
7-14
CSD Line Type
Tap , Settings, the Connections tab, and then CSD Line Type.
You must first apply for Circuit-Switched Data (CSD) service from your
telecom company before you can use this function. In short, this function is
similar to the modem dial-up in a personal computer. By simulating the
Pocket PC as a modem and connecting through the built-in GSM device, you
can use the Pocket PC to access the web.
This figure is for reference only.
The parameters shown in the screen
will be based on the settings
provided by your telecom
company. The charge rate is
regulated by your telecom
company.
Connections 7-15
Connecting with a Personal Computer
For more information, refer to “Synchronization” section.
Wireless LAN Transmission
On the Today screen, tap to launch Wireless Manager. For more
information, refer to “Using Wireless LAN” section.
Tap to launch Wireless Manager
Wireless LAN LED indicator (Amber)
7-16
Using Wireless LAN 8-1
88 UUssiinngg WWiirreelleessss LLAANN //
Connecting to Wireless LAN
This section teaches you how to use the Pocket PC’s built-in wireless
LAN function to connect to the Internet. It is convenient for you to browse
websites and send/receive E-mails through wireless networks at certain
locations where wireless networking services are provided.
When you purchase credits for connecting to the Internet through a
wireless LAN, you will be given the following information: an IP address,
DNS name server address, Proxy server, port, and network key, etc. You need
this information to setup and activate your connection. In some cases, you
may need additional information to use a company’s wireless connection,
please confirm with the network administrator in your company.
If this is your first time using the wireless LAN function, firstly you
should refer to the following “Configure Your Wireless Network” section for
instructions for the necessary configuration settings. After you have
completed the one-time configuration process, you only need to select the
icon in the Wireless Manager main menu for subsequent connections.
8-2
On the Today screen, tap to launch Wireless Manager.
Tap , Programs and then Wireless Manager.
This icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your Pocket PC has successfully connected to the network hotspot (Access Point). The LED indicator on the Pocket PC will blink amber. Tap to connect or disconnect to your wireless network, a means that this function has been disabled. Tap and hold this button, then release to enter the configuration screen.
When the screen shown on the left appears, please choose a wireless network that you can use, and then tap OK Button. Then, select Work, and tap Connect Button. The first time you use the wireless LAN function, your system will ask you to set the above mentioned settings, after that, your system will continually use the settings from your most recent successful connection.
Using Wireless LAN 8-3
Configure Your Wireless Network
WLAN Setup Scenarios
Location Select Networks Proxy ConnectionNetwork key or
Access Point
Home , Settings, the Connections tab, Connections, the Advanced tab, Select Networks Button, and then select My Work Network from “Programs that automatically connect to the Internet should connect using:” menu
1. Close Proxy connection
2. Not required to set Proxy
1. Authentication: Select Open
2. Data Encryption: Select WEP to enable the entry bar regarding Network key
Office Refer to the above and set as My Work Network
, Settings, the Connections tab, Connections, the Tasks tab, select “Edit my proxy server,” and then check the Internet items to enable the entry bar about Proxy
Refer to the above and set the items for Network key
Café or restaurant
Refer to the above and set as My Work Network
1. Close Proxy connection
2. Not required to set Proxy
WLAN select different Access Point
8-4
Configure Your Wireless Network
(Reference for a normal network setup)
You will need a correct IP address, DNS name server address, Proxy
server, and connection port number to setup your connection. If you have
purchased a wireless Internet service account, then the service desk at the
location where you will be connecting will provide you with this information,
or, you should obtain this information from the network administrator of your
company.
When your Pocket PC is unable to
automatically detect or connect to a
usable wireless network, please try
to configure the network manually.
Please refer to this section’s settings
instructions.
1. Select the icon in the
Wireless Manager main menu, a
icon will display on the
navigation bar.
2. Then tap , Settings, the
Connections tab, Connections,
and then the Advanced tab, the
screen displays shown on the left.
3. Select the Select Networks Button.
Using Wireless LAN 8-5
4. As shown on the left, make sure
that My Work Network is selected
for both items, and finally tap
to save and exit.
My Work Network is the WLAN
connection method. As this option
is from a choice of two, the next
time you need to use the GPRS
connection, you will have to refer
to the above listed steps, select My
ISP for the first item.
5. At the Wireless Manager screen,
tap and hold, and then release the
button to enter the WLAN
Utility screen.
6. Then select the Config Button to
enter the WLAN setup screen.
8-6
7. Select name of a currently available
network to enter the WLAN
authorization setup screen.
8. Set accordingly to the rules and
information provided by the hotspot
location.
Authentication: Select Open
Data Encryption: Select WEP to
enable the entry bar about Network
key
Network key
Key index
9. Tap and hold on the name of the
network connection that you can
currently use, then select Connect.
When the icon appears on the
top of the screen, your wireless
network has been successfully
connected.
Using Wireless LAN 8-7
Configure Your Wireless Network
(Reference for Proxy setup)
To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator. If your company’s networking environment doesn’t need Proxy server settings, please close the proxy connection.
Tap , Settings, the Connections tab, Connections, and then the
Tasks tab.
When your Pocket PC fails to automatically detect or connect to a usable wireless network, please try using the manual method to configure your network settings. Please refer to the settings information in this section.
1. Select “Setup my proxy server” or “Edit my proxy server,” as shown on the left.
2. In the Proxy Settings tab screen, make sure that the following items have been checked: This network connects to the Internet This network uses a proxy server to connect to the Internet
8-8
The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures.
3. Enter the name into the “Proxy server” field.
4. Select the Advanced button and enter the advanced settings screen.
5. You can modify the settings by
tapping the HTTP type.
6. Enter the number into the “Port”
field. Finally, tap to save and
exit.
Sending and Receiving Messages 9-1
99 SSeennddiinngg aanndd RReecceeiivviinngg MMeessssaaggeess //
Tap and then Messaging.
Tap to select an account.
Tap to setup a new E-mail account.
Tap to select the highlighted
account above.
Change the account settings. Or
delete a message.
Functions of the Messaging screen: Select the service and folder you
want to display.
Select the sort order for messages.
Tap to open a message.
Tap and hold to display a pop-up
menu of actions.
Provides the relevant menu.
For example, select Go To to
switch to another account.
Or select New to compose a
message.
Tap to delete a message.
9-2
E-mails and SMS Messages
Refer to “Connecting to the Internet” section to learn how to connect the
Pocket PC to the Internet and start using Messaging to send and receive
E-mails and SMS messages.
This section explains the basic preparations and processing principles. If
you have any questions, refer to online help about Pocket PC or
synchronization.
Use Messaging to send and receive E-mails messages in either of these
ways:
1. Send and receive e-mail messages by connecting directly to an e-mail
server through an Internet service provider (ISP) or a network.
2. Synchronize e-mail messages with Microsoft Exchange or Microsoft
Outlook on your desktop computer.
Inbox synchronization does not support synchronization with Microsoft Outlook Express.
Reference for using E-mail:
1. Refer to “E-mail Server Setup” section.
2. Refer to “Using E-mails and SMS”.
Reference for using SMS:
1. Refer to “Using E-mails and SMS” section.
2. To send and receive SMS only, you only need to turn on the Phone
(antenna icon on the Navigation Bar is ). It is not necessary to connect
GPRS to the network nor is it necessary to establish a new E-mail account
and connection in Messaging.
Sending and Receiving Messages 9-3
Synchronizing E-mail Messages
If you want to synchronize e-mails with company or home usage, please
refer to this section. E-mail messages can be synchronized as part of the
general synchronization process. You will need to enable Inbox
synchronization in synchronization tools. For information on enabling Inbox
synchronization, see Help on the desktop computer.
During synchronization:
1. Refer to “Connecting to the Internet” section. Select the partnership you
want to establish under “Set Up a Partnership” and you can start to
synchronize data. If you choose not to synchronize data, you can manually
copy or move E-mails between the Pocket PC and a personal computer.
2. E-mail messages in the “Outbox” folder on your Pocket PC are transferred
to Exchange or Outlook, and then sent from those programs.
3. Exchange or Outlook E-mail is supported.
4. Mails in the Pocket PC Inbox folder will be transmitted to the personal
computer and then sent out via Microsoft Outlook or Microsoft Exchange.
5. If you delete mail in the Pocket PC, this mail will also be deleted from the
personal computer the next time the two devices perform synchronization.
6. SMS messages are not synchronized.
9-4
Connecting Directly to the Mail Server
For single-machine use, not combining office and home E-mails, please
refer to “E-mail Server Setup” section.
You will receive messages directly from the mail server. This is
irrelevant to personal computer use. You can work online or offline. When
working online, you read and respond to messages while connected to the
e-mail server. Messages are sent as soon as you tap Send, which saves space
on your Pocket PC.
When working offline, once you’ve downloaded new message headers
or partial messages, you can disconnect from the e-mail server and then
decide which messages to download completely. The next time you connect,
Inbox downloads the complete messages you’ve marked for retrieval and
sends the messages you’ve composed.
Based on your preference, you can program the Pocket PC to receive
mail for the last few days, receive subjects only or the entire mail, or just
receive mail with file attachments smaller than a specified size. If you want
to receive more or less mail, tap Menu, Tools and then Options to adjust the
E-mail account settings according to your needs.
Sending and Receiving Messages 9-5
E-mail Server Setup
Refer to this section if you are preparing for single-machine use and not
combining office and home E-mails. If you already have an E-mail account
from your ISP or company network, you can use Messaging to send and
receive mails and messages. To establish a new Messaging E-mail server on
your Pocket PC, refer to the following sections.
1. Obtain the following information from your ISP or company’s network
administrator for convenience in setting up the E-mail service.
E-mail address, account name and password
POP3 or IMAP4 server name for internal mail
SMTP server name for sending mail
2. Setup a new E-mail account: Tap , Messaging, and then
select New E-mail account.
9-6
3. Select “Other” for the e-mail
source.
4. Select “Other (POP/IMAP)” for the
e-mail provider.
5. Follow the instructions on the
screens to setup the E-mail account.
6. Refer to “Connecting to the Internet” section or “Using Wireless LAN”
section to connect the Pocket PC to the Internet and you can start sending
and receiving E-mails and SMS messages.
7. Connecting to the E-mail server:
Tap Messaging, Menu, Go To, and then check “Other (POP/IMAP)”.
Tap Menu and then Send/Receive.
Tap Menu, Tools and then Options to change the E-mail account.
Sending and Receiving Messages 9-7
Using E-mails and SMS
Below is a brief description of the Messaging screen functions:
Select the service and folder you
want to display.
Select the sort order for messages.
Tap to open a message.
Tap and hold to display a pop-up
menu of actions.
Status bar
Tap to change the account settings.
Tap to delete a message.
9-8
Brief description on writing, sending, reading and replying (to) mail:
1. Send and Receive Mail: Tap Menu and then New to compose a message
and then tap Send to send it.
Tap To, Cc or Bcc to open the Contacts screen. As long as you have set
up Contacts beforehand, you can just tap to select.
Tap the data area to input the E-mail adress, mobile phone number and
subject directly. If there is more than one contact, use a semi-colon (;) to
separate the addressees. POP/IMAP means to send E-mail, and Text Messages means to send an
SMS message. Note that the same message cannot be sent as E-mail and
SMS message at the same time. Use the scroll bar to view the header.
Menu Button: Provides frequently-used functions for writing mail such as
request return receipt, attach files to E-mail, select canned messages, edit
canned messages or cancel mail.
Send Button: Send your messages.
Sending and Receiving Messages 9-9
2. Read and Reply: Receive new mails by tapping Menu and then
Send/Receive. Switch to the “Inbox” folder and tap to open. The following
figure shows the open mail screen.
Besides reading the messages,
provide frequently-used functions
for replying to or forwarding.
3. Change preference settings.
Set the Inbox Synchronization option in synchronization tools.
Tap Messaging, Menu, Tools, Options, and then the Accounts,
Message … tabs on the Pocket PC to set the appropriate options.
9-10
Direct Push Technology Alert
The Direct Push Technology alert function will enable you as a
corporate user to never miss another e-mail, using the Pocket PC for the best
business service. Through the synchronization feature, your Pocket PC can
instantly and automatically receive important e-mails from Microsoft
Exchange Server.
Direct Push Technology Alert Settings
The following description will explain how to setup the synchronization
program on the Pocket PC end, and to directly synchronize the Pocket PC
with Exchange Server. This way, your device under GPRS or wireless
network connections will be able to receive in-coming e-mail alerts, and be
able to instantly read the messages.
A reminder that if you selected the connection method to be wireless
network, for power saving purposes when the Pocket PC enters sleep mode
the connection will be broken. During this time you will not be able to
receive instant e-mail. However, you will only need to press the “Power
Button” to automatically complete the connection to the wireless network.
1. Tap , Programs, ActiveSync,
Menu, and then Configure Sever. If the Exchange Server
synchronization has not been setup
before, please select Add Server
Source.
Tap to connect and synchronize.
Tap to modify the synchronization
settings.
Sending and Receiving Messages 9-11
2. Obtain the server address, user
name, network etc. from the
company network administrator to
successfully setup the server data.
3. Tap Menu and then Schedule. The
Peak times and Off-peak times
provide a As items arrive option,
this is the direct push technology
alert function.
9-12
Windows Live™ Messenger
To switch to Windows Live™ Messenger, tap , Programs, and
then tap Messenger. Windows Live™ Messenger on your Pocket PC is an
instant messaging program that lets you:
See who is online.
Send and receive instant messages.
Have instant message conversations with groups of contacts.
For more information on using Windows Live™ Messenger, tap
and then Help.
To use Windows Live™ Messenger, you must have a Microsoft
Passport™ account or a Microsoft Exchange e-mail account. You must have a
Passport to use Windows Live™ Messenger Service. If you have a Hotmail®
or MSN account, you already have a Passport. Once you have obtained either
a Microsoft Passport or a Microsoft Exchange account, you are ready to set
up your account.
Sign up for a Microsoft Passport account at http://www.passport.com. Get
a free Microsoft Hotmail e-mail address at http://www.hotmail.com.
Sending and Receiving Messages 9-13
Setting Up
The first time you use: Tap , Programs, and then Messenger.
On the Today screen, tap Messenger to display the Windows Live™
Messenger sign-in screen.
Before you can connect, you must enter Passport or Exchange account
information.
1. Tap Messenger on the Today
screen.
2. Tap Sign in.
9-14
Working with Contacts
If you already use Windows Live™ Messenger on your desktop
computer, your contacts will show up on your Pocket PC without being
added again.
The Windows Live™ Messenger window shows all of your messenger
contacts at a glance, divided into Online and Offline categories, or sorted by
groups. From this view, while connected, you can chat, send an e-mail, block
the contact from chatting with you, or delete contacts from your list using the
pop-up menu.
Tap a contact to start a chat.
Provides the relevant menu.
For example, select Add new
contact to create a new MSN
contact. Or select Sign out to quit
from Windows Live™ Messenger.
To see others online without being seen, tap Menu, Change status, and
then select Appear Offline.
If you block a contact, you will appear offline but will remain on the
blocked contact’s list. To unblock a contact, tap Menu, Contact options,
and then Unblock contact.
Sending and Receiving Messages 9-15
Chatting with Contacts
Tap a contact name to open a chat window.
View full chat.
Enter your message in the text
entry area, and tap Send.
Return to the contacts list, and
select a contact to chat with.
The contact you are chatting with.
Provides the relevant menu.
For example, to invite another
contact to a multi-user chat, select
Options and then Add
participant, and tap the contact
you want to invite.
9-16
MMS Message
Tap , Messaging, and then MMS.
Tap , Programs, Phone, and then MMS Message.
The MMS Message mailbox is very similar to ordinary E-mail mailbox
function. “Inbox” saves the MMS that you received while “Outbox” saves the
MMS that you are going to send. “Sent” saves a backup copy of the MMS
sent successfully. “Drafts” saves incompletely edited MMS messages.
Create and Edit MMS
How to compose a new MMS message:
1. Tap , Messaging, and then
MMS.
Sending and Receiving Messages 9-17
2. Tap Menu and then New to add a
new MMS.
Tap to change the MMS sort
method.
Select the folder types you want to
display in the list. Tap to manage your MMS
mailbox. Provides the relevant menu.
3. Choose Custom to edit, or select
any MMS sample.
9-18
4. If Custom is selected, there will be
a customizable MMS sample at the
MMS editor. Tap To button to select a phone
number or E-mail address from
your Contacts. You can tap the
entry area to input the phone
number or E-mail address also.
Tap to show or hide the complete
header. Tap to input the subject.
Tap the specified area to insert the
picture/video file.
Tap the specified area to edit text.
Tap the specified area to select the
audio file.
Tap to view the other slides you
created. Provides the relevant menu.
Tap Send button to send the MMS
messages.
Sending and Receiving Messages 9-19
Birthday Reminder *
Download Programs
For effective use of memory, the programs marked with an asterisk “*”,
are posted on our website: http://www.glofiish.com for downloading.
Refer to further instructions for use after downloading these programs.
Tap , Programs, Utilities, and then Birthday Reminder.
Combines Contacts and this application, you may store birthdays and
anniversary dates in the Contacts card first. When the day comes, a message
will remind you to send a SMS, MMS, make a phone call or send an email to
him/her and stay a warm connection forever.
1. Using the main screen
A remark icon of a birthday or
anniversary, tap the icon to show
the details you stored.
Select the desired monthly calendar
you want to view.
Tap here to set the corresponding
features.
Tap here to add a new contact.
9-20
2. For adding a new contact, you may
tap New on the main screen.
Use the scroll bar to scroll the
pages.
Find the Birthday or Anniversary
field and enter the data.
3. For setting the corresponding
features, you may tap Settings on
the main screen.
Tap the check box to display a
popup message for reminding.
The options of reminding methods.
Remind you once: at 8:00 A.M.
Remind you two times: at 8:00
A.M. and noon.
Remind you three times: at 8:00
A.M., noon and 6:00 P.M.
Select the desired background
image of main screen.
Sending and Receiving Messages 9-21
4. When the reminding date you set
comes, the Pocket PC phone will
popup a message on the screen to
remind you.
5. Tap the icon on the top of
screen and tap Preview to enter the
birthday or anniversary reminder
settings screen.
6. Moreover, you may tap the ,
, or icons on the calendar
of main screen.
You may send a SMS, MMS, make
a phone call or send an email to
him/her after selected
corresponding icons.
Show you that you ever sent
greeting messages to this contact.
Select one contact to be the
message recipient.
9-22
Multimedia 10-1
1100 MMuullttiimmeeddiiaa //
Using Camera Pocket PC Exterior and Photograph Functions
Front and Sides
Rear
1. Camera hotkey, camera shutter, camcorder button
2. Select the storage location
3. Activate or disable the flash 4. Quit Camera 5. Digital zoom 6. Switch between photograph
and video modes 7. Select front or rear camera lens
( Applies to M810) 8. Adjust brightness
9. MicroSD card slot 10. Self portrait mirror 11. Flash or light 12. Camera lens
1
1
8
9
4
7
3
10
11
12
2
5
6
10-2
Pocket PC Exterior and Video Functions
Front and Sides
Rear
1. Camera hotkey, camera shutter,
camcorder button
2. Select the storage location
3. Quit Camera 4. Digital zoom
5. Switch between photograph and
video modes
6. Adjust brightness
7. MicroSD card slot 8. Self portrait mirror
9. Light 10. Camera lens
1
1
6
7
3
8
9
10
2
4
5
Multimedia 10-3
How to Use the Camera?
Filming Tips
For example, to take a self-portrait, face the light source and avoid dark
surroundings or your back to the light source for better results.
Press the button on the Pocket PC.
Tap , Programs, Multimedia, and then Camera.
Action Instructions
Scenery or Portrait
(Default)
1. Point the screen of the Pocket PC toward you.
2. If the screenshot is good, press the camera
shutter on the side of the Pocket PC to
take the picture.
10-4
Action Instructions
Scenery or Portrait
(Default)
3. If you are in the photograph mode from the
guidance wizard, pressing the camera shutter
will link you to the applications. For more
information about the provided tools, please
refer to the later descriptions.
4. Tap to continue with the next shot.
Self Portrait 1. ( Applies to M810) First tap along the
bottom of the screen. When the icon changes to
, the front camera lens will be used.
2. ( Applies to M810 and M750) Flip the Pocket
PC over and face the “self portrait mirror”
beside the camera lens toward yourself.
3. If the screenshot is good, press the camera
shutter to take the picture.
Multimedia 10-5
Video Instructions
Video 1. Switch to the video mode.
2. Face the Pocket PC toward you.
3. If the screenshot is good, press the camcorder
button on the side of the Pocket PC to
begin filming.
4. During filming, the green dot and Ready icon at
the upper left of the screen will turn to a red dot
with flashing numbers of time lapsed.
10-6
Video Instructions
Video 5. Press the camcorder button again to stop
filming. If you are in the video mode from the
guidance wizard, stopping filming will link you
to the applications. For more information about
the provided tools, please refer to the later
descriptions.
6. Tap to continue with the next video
segment.
Icon Toolbar Description
Continue to shoot or film
Delete the current photograph or video
Link to MMS Message or Messaging
Link to data transfer application
Link to Pictures & Videos
When using “Continuous Shot” mode, go to the previous or
next picture
Multimedia 10-7
Common Tools for Photograph
The Camera can be used to take pictures or videos, and this chapter will
introduce the common tools for photograph and icons on the screen. The
previous chapter introduces hardware hotkeys on the Pocket PC that can also
control some of the tool icons shown on the screen.
1. Switch between photograph and video mode. 2. Remaining shots. 3. Macro mode. 4. Activate flash. 5. Number of shots for the “Continuous Shot” mode. 6. Select the storage location. 7. Timer for “self-timer.” 8. Select the environment lighting. 9. Select the resolution, higher resolutions lead to larger picture files. 10. Quit Camera. 11. Digital zoom. 12. Link to Pictures & Videos for browsing and managing files. 13. Open the camera setup screen. 14. Set if the date is shown. 15. Display or hide detailed information. 16. Select front or rear camera lens. ( Applies to M810) 17. Adjust brightness.
10 1
11
2
4
6789
12 13 14 15 16 17
3
5
10-8
Common Tools for Video
The Camera can be used to take pictures or videos, and this chapter will
introduce the common tools for video and icons on the screen. The previous
chapter introduces hardware hotkeys on the Pocket PC that can also control
some of the tool icons shown on the screen.
1. Switch between photograph and video mode.
2. Record status: When the recording begins, the green dot will become a red
dot.
3. Activate or disable the sound of camcorder button.
4. Select the storage location.
5. Select the environment lighting.
6. Select the resolution, higher resolutions lead to larger video files.
7. Quit Camera.
8. Digital zoom.
9. Link to Pictures & Videos for browsing and managing files.
10. Open the video setup screen.
11. Display or hide detailed information.
12. Adjust brightness.
7 1
8
23456
9 10 11 12
Multimedia 10-9
Advanced Setup for Photograph or Video
Tap the onscreen to open the advanced setup screen for the Camera.
To save the setup, please tap to end.
Tap to switch between the previous page or next page of the setup.
Along the bottom of the screen are the function buttons. Tap to show the
corresponding options for the function.
Photograph Video Descriptions
Select the environment lighting (white balance).
Select the resolution, higher resolutions lead to
larger files.
-- Macro mode.
-- Select front or rear camera lens.
-- Activate flash light.
Select quality.
-- Activate “self-timer;” a specific length of time can
be set for “self-timer.”
Select effects.
-- Select picture frame or background.
Select storage location.
10-10
Photograph Video Descriptions
--
Activate or disable the “Continuous Shot” function;
the number of shots can be selected for the
“Continuous Shot” function. Please note that the
resolution must be lower or equal to 640x480.
Activate or disable the sound of shutter or
camcorder button.
Activate or disable the wizard guided capture mode.
--
Display or hide the date and time; the preview
screen will not show the time, but the saved file will
be marked with the timestamp.
Adjust brightness.
Adjust contrast.
Adjust exposure level.
Adjust for fluorescent light frequency.
Display or hide detailed information.
-- Select file format; videos in the 3GP format can be
played back on the PC.
Restore all options to the default value.
View information about Camera.
Important Hints
1. When the “--” is shown, this indicates that the function is not supported
under this mode.
2. When the camera lens is set to face the front, for example when you want
to have a self portrait, the macro shot, flash light, picture frame etc.
functions will not be available.
3. Functions and options for various camera modes will be referred to the
actual onscreen display, and will not be listed here in full.
Multimedia 10-11
Multimedia Manager
Tap , Programs, Multimedia, and then Multimedia Manager.
You can use Multimedia Manager to manage and view multimedia
information such as pictures, music, videos, etc.
Preview Multimedia Information
Select the folder you want to
display.
Tap to change the order of the list.
Preview thumbnail. Set according
to the multimedia information
placed in the folder. If you are
browsing pictures, tap a thumbnail
to display the full picture. If you
are browsing music or video, tap a
thumbnail to play.
Tap and hold the thumbnail and when the pop-up menu appears, select the
desired functions.
View Button: Select other types or auto-play pictures as a slideshow. Tools Button: Create new folders, link to other usable programs and set
the viewing method. Show Type Button: Select to display as large or small picture and the
number of pictures per row.
Tap to the upper directory.
10-12
Slide Show Function
Tap Multimedia Manager, View,
and then SlideShow.
Double tap anywhere on the screen
to exit the slideshow. Playing the last picture while not in
the slide show looping mode, tap
the screen and then tap the
icon to exit the slideshow.
Refer to the method described
above to exit the slideshow and
enter the screen shown on the left. Select the picture scale, rotation
and view picture properties.
Link to other available programs.
Full-screen view. To exit
full-screen mode, tap the screen
and then tap the icon on the
lower left corner of the screen.
View the previous or next picture.
Enlarge or shrink to the suitable
screen size. Zoom in or out.
Multimedia 10-13
Multimedia Manager Tools
Tap Multimedia Manager, Tools,
and then Setting.
Slideshow tab: As shown on the
left, this is the settings of the
slideshow mode.
Association tab: Select the desired
file type you want to open with
Multimedia Manager.
File Browse tab: Set the browsing
method.
Tap Multimedia Manager, Tools,
and then Delivery.
Tap thumbnail. The in the upper
left corner indicates that it is
already selected.
Next: Select the program to link to.
For example, if you select “Image
Maker,” you will go to Image
Maker.
10-14
Image Maker *
Download Programs
For effective use of memory, the programs marked with an asterisk “*”,
are posted on our website: http://www.glofiish.com for downloading.
Refer to further instructions for use after downloading these programs.
Tap , Programs, Multimedia, and then Image Maker.
Image Maker is used to create, edit and view pictures. Use it to view
and edit the pictures you take. You can also use the relevant Image Maker
commands and tools such as rotate, stretch, brightness, etc. to edit and
process the graphics.
Drawing tool box.
Tap to utilize more drawing tools.
Drawing or image editing area.
When the image file exceeds the
viewing range of the editing area,
tap the scroll button on the right or
bottom of the screen.
File Button: Provides file
management function such as
opening and saving files. Edit Button: Provides editing
functions such as undo, copy and
paste, etc.
Image Button: Provides special
effects for pictures.
Multimedia 10-15
Icon Meaning of the Drawing Tool Box
Select foreground and background colors
Eraser
Pick color
Pencil for writing and drawing lines
Airbrush
Line
Curve
Rectangle
Ellipse
Polygon
Rounded rectangle
Text
Select
Fill with color
Magnifier
Brush
Icon Meaning of the Drawing Toolbar
New document
Open
Save
10-16
Image Wizard *
Download Programs
For effective use of memory, the programs marked with an asterisk “*”,
are posted on our website: http://www.glofiish.com for downloading.
Refer to further instructions for use after downloading these programs.
Tap , Programs, Multimedia, and then Image Wizard.
Image Wizard provides frames, icons, filters and simple drawing tools
that you can use to process photos and pictures. Wizard will guide you to
complete the process step-by-step. You can then choose to save the file or
send it through E-mail or MMS Message.
Go to the next step.
Preview area
Select Background Picture:
Select an existing photo or picture.
For example, a photo you have
taken.
Select Photo Frame
Undo
Repeat
Full Screen. Tap to
return.
Save
Multimedia 10-17
Return to the previous step.
Input a name for the file and select
the file saving path.
Use system name and save to the
specified path.
Send tab: Send through E-mail or
MMS Message.
10-18
FM Tuner
Tap , Programs, Multimedia, and then FM Tuner.
This program is for listening to the radio with headset. The headset will
improve radio quality with its built-in antenna.
Tool bar: Screen off: This function turns
off the screen but leaves the program running. Turn on the power to activate the screen. When the Pocket PC enters sleep mode, the system will shut down the program.
My Favorite: Manage My favorite radio station list.
Band: Change the band frequency. Use the funtion to change the local band rate when travelling overseas. Show the selected band frequency.
Show the station frequency. Tap and edit the frequency to change the
station. The marquee below shows the relevant information from the radio
station.
The volume setting. Show the My favorite station list. Tap an item from the list to listen to the
station. Hold an item for a few seconds to save the current station.
Turn the sound on or off.
or : Seek to the first radio station.
or : Set the last or next frequency.
Multimedia 10-19
Set the station frequency.
Tap and edit the frequency to set a
custom station.
Note: The frequency must be in the
legal range.
Cancel.
OK.
Delete the previous digit.
Tap the My Favorite Button in the
main screen to set My favorite
station. Close and save the setting. The default value is EUROPE. To
change the setting, hold the desired
tab for a few seconds. My favorite station list. Choose an empty item and tap the
+ button in the tool bar to edit the
station. Tool bar:
: Add station
: Delete station
: Edit station
: Set the position in the list
: Close without saving
10-20
Namecard Manager
Tap , Programs, Multimedia, and then Namecard Manager.
Provides full name cards management for scanning paper name cards
into a digital format. The contacts database from Pocket PC can also be
integrated into a unified contacts book.
Digitize New Name Cards
1. Tap Recognize.
2. Tip: Before taking a picture, please take the following pointers to improve
recognition quality.
If the original name card is a landscape design, it is recommended that you
rotate the Pocket PC before taking the picture.
Keep the Pocket PC’s camera lens at a distance of 10~12cm. Fill the four corners of the screen marked by red indicators with the name
card.
Multimedia 10-21
3. Take pictures
Prepare a name card and
adjust the position. Press the
shutter to the side of the
Pocket PC to take the shot.
You can directly select
on the screen to take a picture.
4. Name card recognition
Select Language to choose
the appropriate language for
this name card.
Select or Identify to
recognize the contents on the
name card.
10-22
5. Modify the name card’s contents
and confirm
Select the contents field to make
modifications.
When selecting the contents field,
the name card source will be shown
for verification. Double tap on the
name card area to zoom to the max
viewing.
Select the field name to modify and
adjust the error recognitions. Choose whether to keep this data
entry.
Add this name card to the contacts
database on the Pocket PC. Go
back to Contacts to view the new
entry.
Icon Meaning
Enable or disable the flashlight.
Select storage path
Take a picture. Identical to the shutter at side of a Pocket
PC. If the result is not satisfactory, retake the picture.
Increase or decrease zoom.
Rotate left or right.
Identify name card.
Multimedia 10-23
Name Cards Management
1. Tap Manage.
2. Main screen for name card
management
Only recognized name cards will be
shown here.
Enter the quick search page. Tap a
letter and the results for name cards
created in Namecard Manager
will be shown. Delete the entered text to the left.
Search criteria for name card. All
matching name cards for “Name,
Work, or Tel” will be shown on the
screen. To search for all name
cards, please leave the field blank.
10-24
Name card index display area, select an entry to expand its contents. Display area for the original name card. Provides the relevant menu.
New: Create a new digital name card.
Import: Supported format includes BMP, JPG, and PNG. An existing
name card image file can be imported and then processed.
Edit: Modify the name card information.
Delete: Delete the selected name card.
Return to the previous page.
3. Quick search screen
After selecting a letter, the name
cards created in Namecard
Manager will be shown. The
matching name or company entries
will be shown on the name cards
management list.
Companion Programs 11-1
1111 CCoommppaanniioonn PPrrooggrraammss //
Microsoft® Pocket Outlook includes Calendar, Contacts, Tasks,
Messaging, and Notes. You can use these programs individually or together.
For example, e-mail addresses stored in Contacts can be used to address
e-mail messages in Messaging.
Using synchronization tools, you can synchronize information in
Microsoft Outlook or Microsoft Exchange on your desktop computer with
your Pocket PC. You can also synchronize this information directly with a
Microsoft Exchange server. Each time you synchronize, synchronization
tools compare the changes you made on your Pocket PC and desktop
computer or server and updates both computers with the latest information.
For information on using synchronization tools, see Help on the desktop
computer.
You can switch to any of these programs by tapping them on the
menu.
11-2
Calendar: Scheduling Appointments and
Meetings
Use Calendar to schedule appointments, including meetings and other
events. You can check your appointments in one of several views (Agenda,
Day, Week, Month, and Year) and easily switch views by using the View
menu.
Tap to go to today.
Tap to display or edit the
appointment details.
View menu.
Tap Menu and then New
Appointment to create a new
appointment.
You can customize the Calendar display, such as changing the first day of
the week, by tapping Menu, Tools, and then Options.
Companion Programs 11-3
Create an Appointment
Tap to return to the calendar (the
appointment is saved
automatically).
Tap to choose from predefined text.
Tap to choose from previously
entered locations.
Tap to select a time.
Tap to select a date.
Notes is a good place for maps and
directions.
1. If you are in Day or Week view, tap the desired date and time for the
appointment.
2. Tap Menu and then New Appointment.
3. Using the input panel, enter a description and a location. Tap first to select
the field.
4. If needed, tap the date and time to change them.
5. Enter other desired information. You will need to hide the input panel to
see all available fields.
6. To add notes, tap the Notes tab. You can enter text, draw, or create a
recording. For more information on creating notes, see “Notes: Capturing
Thoughts and Ideas” section.
7. When finished, tap to return to the calendar.
If you select Remind me in an appointment, your Pocket PC will remind
you according to the options set in , Settings, the Personal tab,
Sounds & Notifications.
11-4
Use the Summary Screen
When you tap an appointment in Calendar, a summary screen is
displayed. To change the appointment, tap Edit.
View appointment details.
View.
Tap Menu and then Edit to change
appointment.
Create Meeting Requests
You can use Calendar to set up meetings with users of Outlook or
Pocket Outlook. The meeting request will be created automatically and sent
either when you synchronize Inbox or when you connect to your e-mail
server. Indicate how you want meeting requests sent by tapping Menu, Tools,
and then Options.
Companion Programs 11-5
Schedule a Meeting
1. Create an appointment.
2. In the appointment details, hide the input panel, and then tap Attendees.
3. From the list of e-mail addresses you’ve entered in Contacts, select the
meeting attendees.
The meeting notice is created automatically and placed in the Outbox
folder.
For more information on sending and receiving meeting requests, see
Calendar Help and Messaging Help on the Pocket PC.
11-6
Contacts: Tracking Friends and Colleagues
Contacts maintains a list of your friends and colleagues so that you can
easily find the information you’re looking for, whether you’re at home or on
the road.
Tap and enter part of a name to
quickly find it in the list.
Tap to display the contact details.
Tap and hold to display a pop-up
menu of actions.
This icon indicates that this
particular contact entry is stored on
your SIM card, so some of the
information you will only be able
to modify when the mobile phone
is turned on.
Provides the relevant menu.
For example, select Options to
change the way information is
displayed in the list.
Tap to create a new contact.
Companion Programs 11-7
Create a Contact
1. Tap New. And then select a contact type.
2. Using the input panel, enter a name and other contact information. You
will need to scroll down to see all available fields.
3. To assign the contact to a category, scroll to and tap Categories and select
a category from the list. In the contact list, you can display contacts by
category.
4. To add notes, tap the Notes tab. You can enter text, draw, or create a
recording. For more information on creating notes, see “Notes: Capturing
Thoughts and Ideas” section.
5. When finished, tap to return to the contact list.
Tap to return to the contact list (the
contact is saved automatically).
Tap to select a representative
picture for this contact, when
dialing, this picture will appear on
your screen, making it easier to
identify the contact which you are
dialing to and adding a lot of fun.
Scroll to see more fields.
Notes is a good place for maps and
directions.
11-8
Find a Contact
There are four ways to find a contact:
In the contact list, enter a contact name in the box under the navigation bar.
To show all contacts again, clear text from the box or tap the button to the
right of the box.
In the contact list, tap Menu, Filter and then select the type of contact that
you want displayed. To show all contacts again, select All Contacts. To
view a contact not assigned to a category, select No Categories.
To view the names of companies your contacts work for, in the contact list,
tap Menu, View By and then Company. The number of contacts that
work for that company will be displayed to the right of the company name.
Tap , Programs, and then Search, enter the contact name, select
Contacts for the type, and then tap Search.
Companion Programs 11-9
Use the Summary Screen
When you tap a contact in the contact list, a summary screen is
displayed.
View contact details. All of the
available contact information is
listed, you can tap and use easily.
Provides the relevant menu.
For example, select Edit to change
the contact information. Or select
Save to SIM or Save to Contacts
to duplicate to Contacts or SIM
phonebook.
Tap to view notes.
11-10
Tasks: Keeping a To Do List
Use Tasks to keep track of what you have to do.
Indicates high priority.
Tap to display or edit the task
details.
Tap and hold to display a pop-up
menu of actions.
Tap to change the status.
Provides the relevant menu.
For example, tap Filter to select
the category of tasks you want
displayed in the list. Tap Sort By
to select the sort order of the list.
Or tap Options to change the way
information is displayed in the list.
Companion Programs 11-11
Create a Task
1. Tap Menu and then New Task.
2. Using the input panel, enter a description.
3. You can enter a start date and due date or enter other information by first
tapping the field. If the input panel is open, you will need to hide it to see
all available fields.
4. To assign the task to a category, tap Categories and select a category from
the list. In the task list, you can display tasks by category.
5. To add notes, tap the Notes tab. You can enter text, draw, or create a
recording. For more information on creating notes, see “Notes: Capturing
Thoughts and Ideas” section.
6. When finished, tap to return to the task list.
Tap to return to the task list (the
task is saved automatically).
Tap to choose from predefined
subjects.
Notes is a good place for maps and
drawings.
To quickly create a task with only a subject, check Show Tasks entry bar
on the Options menu. Then, tap “Tap here to add a new task” and enter
your task information.
11-12
Use the Summary Screen
When you tap a task in the task list, a summary screen is displayed. To
change the task, tap Edit.
View task details.
Tap to show and hide additional
summary information. View notes.
Tap to change task.
Companion Programs 11-13
Notes: Capturing Thoughts and Ideas
Quickly capture thoughts, reminders, ideas, drawings, and phone
numbers with Notes. You can create a written note or a recording. You can
also include a recording in a note. If a note is open when you create the
recording, it will be included in the note as an icon. If the note list is
displayed, it will be created as a stand-alone recording.
Tap to change the sort order of the
list.
Tap to open a note or play a
recording.
Tap and hold to display a pop-up
menu of actions.
Tap to record.
Provides the relevant menu.
For example, check View
Recording Toolbar to show the
Recording toolbar.
Tap to create a new item.
11-14
Create a Note
1. Tap New.
2. Create your note by writing, drawing, typing, and recording. For more
information about using the input panel, writing and drawing on the screen,
and creating recordings, see “Enter Information on Your Pocket PC.”
Tap to return to the note list (the
note is saved automatically).
Tap to show or hide the input
panel.
Provides the relevant menu.
For example, check View
Recording Toolbar to add a
recording to the note; or check
Draw to write on the screen.
Companion Programs 11-15
Word Mobile
Word Mobile works with Microsoft Word on your desktop computer to
give you easy access to copies of your documents. You can create new
documents on your Pocket PC, or you can copy documents from your
desktop computer to your Pocket PC. Synchronize documents between your
desktop computer and your Pocket PC so that you have the most up-to-date
content in both locations.
Use Word Mobile to create documents, such as letters, meeting minutes,
and trip reports. To create a new file, tap , Office Mobile, Word Mobile,
and then New. A blank document appears. Or, if you’ve selected a template
for new documents in the Options dialog box, that template appears with
appropriate text and formatting already provided. You can open only one
document at a time; when you open a second document, you’ll be asked to
save the first. You can save a document you create or edit in a variety of
formats, including Word Document, Document Template, Rich Text Format,
and Plain Text.
Word Mobile contains a list of the files stored on your Pocket PC. Tap a
file in the list to open it. To delete, make copies of, and send files, tap and
hold a file in the list. Then, select the appropriate action on the pop-up menu.
11-16
Select the type of folder you want
displayed in the list.
Tap to change the sort order of the
list.
Tap to open a document.
Tap and hold an item to see a
pop-up menu of actions.
Tap to create a new document.
You can change the zoom magnification by tapping View and then Zoom.
Then select the percentage you want. Select a higher percentage to enter
text and a lower one to see more of your document.
If you’re opening a Word document created on a desktop computer, check
Wrap to Window on the View menu so that you can see the entire
document.
Companion Programs 11-17
Using the input panel, enter typed text into the document. For more
information on entering typed text, see “Enter Information on Your Pocket
PC.”
To format existing text and to edit text, first select the text. You can
select text as you do in a Word document, using your stylus instead of the
mouse to drag through the text you want to select. You can search a document
to find text by tapping Menu, Edit and then Find/Replace.
Tap to return to the document list
(changes are saved automatically).
Tap and hold to see a pop-up menu
of actions.
Tap to format text. Provides the relevant menu.
For example, select Format to
change formatting options.
Tap View and then check Toolbar
to show the toolbar.
11-18
Excel Mobile
Excel Mobile works with Microsoft Excel on your desktop computer to
give you easy access to copies of your workbooks. You can create new
workbooks on your Pocket PC, or you can copy workbooks from your
desktop computer to your Pocket PC. Synchronize workbooks between your
desktop computer and your Pocket PC so that you have the most up-to-date
content in both locations.
Use Excel Mobile to create workbooks, such as expense reports and
mileage logs. To create a new file, tap , Office Mobile, Excel Mobile,
and then New. A blank workbook appears. Or, if you’ve selected a template
for new workbooks in the Options dialog box, that template appears with
appropriate text and formatting already provided. You can open only one
workbook at a time; when you open a second workbook, you’ll be asked to
save the first.
Excel Mobile contains a list of the files stored on your Pocket PC. Tap a
file in the list to open it. To delete, make copies of, and send files, tap and
hold a file in the list. Then select the appropriate action from the pop-up
menu.
Companion Programs 11-19
Excel Mobile provides fundamental spreadsheet tools, such as formulas,
functions, sorting, and filtering. To display the toolbar, tap View and then
check Toolbar.
Cell contents appear here as you
enter them.
Select cell contents for the resource
of chart.
Insert Chart Button
AutoSum Button
Zoom Button
Tap Format Chart Button to
modify the relevant information,
such as titles, scale, type and series.
11-20
Tips for Working in Excel Mobile
For more information on using Excel Mobile, tap and then Help.
Note the following when working in large worksheets in Excel Mobile:
View in full-screen mode to see as much of your worksheet as possible.
Tap View and then check Full Screen. To exit full-screen mode, tap View
and then Full Screen to restore.
Show and hide window elements. Tap View, Show and then tap the
elements you want to show or hide.
Freeze panes on a worksheet. First select the cell where you want to freeze
panes. Tap View and then Freeze Panes. You might want to freeze the top
and leftmost panes in a worksheet to keep row and column labels visible as
you scroll through a sheet.
Split panes to view different areas of a large worksheet. Tap View and
then Split. Then drag the split bar to where you want it. To remove the
split, tap View and then Remove Split.
Show and hide rows and columns. To hide a row or column, select a cell in
the row or column you want to hide. Then tap Menu, Format, then Row
or Column, and then Hide. To show a hidden row or column, tap Menu,
Format, then Row or Column, and then Unhide.
Companion Programs 11-21
PowerPoint Mobile
View PowerPoint slides created in PowerPoint 97 and above versions on
your desktop computer. The supported formats include .ppt and .pps files.
Select the type of folder you
want displayed in the list.
Tap to change the sort order
of the list.
Tap to open a file, and play
the slides.
Tap to open the file you
played last time.
Provides the relevant menu.
Tap on the lower left
corner to open the menu.
Tap End Show to quit.
11-22
Windows Media Player
Use Microsoft Windows Media Player for Pocket PC to play digital
audio and video files that are stored on your Pocket PC or on a network. To
switch to Windows Media Player for Pocket PC, tap , Programs, and
then Windows Media.
Use full-screen to view video.
Display website. Find music or
video to be played from website.
Return to the start of the current
file or previous file.
Tap to play or pause. Tap to skip to the next song.
Tap to adjust volume.
Audio/mute
Indicates the progress of the current
track.
To enter the screen shown on the
left, tap Menu and then Library.
Select Library.
Tap and hold the file or folder to be
played, then tap Play or Queue
Up.
Menu Button: Tap Open File to
play files that do not belong to the
current library. Tap Update
Library to update the file list.
Companion Programs 11-23
Use Microsoft Windows Media Player on your desktop computer to
copy digital audio and video files to your Pocket PC.
For more information about using Windows Media Player for Pocket PC,
tap , and then tap Help.
11-24
Streaming Player
Tap , Programs, and then Streaming Player.
Some audio and movie files that cannot be played back from Microsoft
Windows Media Player, for example RTSP, HTTP… types of files, will be
automatically switched to Streaming Player by the system.
Enter the setup page, specify the
file to playback.
Zoom in or out of the video
content.
Play or pause.
Stop. Mute or enable sound.
Adjust volume level.
Provides the relevant menu.
For example, select Options to
setup the network related options;
select Properties to view the
information on the current file.
Indicates the current position in the
track.
Tapping in this area during
playback will enable full-screen
video content. Tapping the screen
again will return to the normal
display method.
Companion Programs 11-25
At the Streaming Player main
screen, select Open to enter the
page similar to the left.
When using Internet Explorer to
run media files not supported by
Windows Media, the system will
automatically switch to the
Streaming Player for playback.
You can also directly enter the
URL.
Select from the played history list.
Tap Connect to run the file
specified in the URL field. Provides the relevant menu.
Select Clear History to clear the
entered information. Select Cancel
to cancel the current task.
11-26
Internet Explorer
Using Internet Explorer
Use Microsoft® Internet Explorer Mobile to view Web or WAP pages in
either of these ways:
During synchronization with your desktop computer, download your
favorite links and mobile favorites that are stored in the Mobile Favorites
subfolder in Internet Explorer on the desktop computer.
Connect to an Internet service provider (ISP) or network and browse the
Web. To do this, you’ll need to create the connection first, as described in
“Connect to the Internet”.
When connected to an ISP or network, you can also download files and
programs from the Internet or intranet.
To switch to Pocket Internet Explorer, tap and then Internet
Explorer.
Companion Programs 11-27
Browse the Internet
Refer to “Connecting to the Internet” section to connect the Pocket PC
to the Internet and start browsing websites.
1. Tap and then Internet Explorer.
2. Input the site address into the address bar at the top of the screen and
connect to this site.
3. Use the scroll bar at the right side or bottom of the screen, or press the up
or down button on the Pocket PC to view the contents of the entire website.
Input address here
Tap to launch
Back Button
Provides the relevant menu, such as
Favorites, Add to Favorites,
Home, and Refresh.
Aside from keying in the address directly, you can also connect to
websites using the following methods.
Tap the Favorites button, and then tap the favorite you want to view.
In the address bar, tap the arrow ▼ to choose from previously entered
addresses.
To add a favorite link while using the Pocket PC, go to the page you want
to add, tap and hold on the page, and tap Add to Favorites.
11-28
View Mobile Favorites and Channels
Tap the favorite you want to view.
Tap to add or delete a folder or
favorite link.
1. Tap the Favorites button to display your list of favorites.
2. Tap the page you want to view.
You’ll see the page that was downloaded the last time you synchronized
with your desktop computer. If the page is not on your Pocket PC, the
favorite will be dimmed. You will need to synchronize with your desktop
computer again to download the page to your Pocket PC, or connect to the
Internet to view the page.
The Mobile Favorites Folder
Only items stored in the Mobile Favorites subfolder in the Favorites
folder in Internet Explorer on your desktop computer will be synchronized
with your Pocket PC. This folder was created automatically when you
installed synchronization tools.
Companion Programs 11-29
Favorite Links
During synchronization, the list of favorite links in the Mobile Favorites
folder on your desktop computer is synchronized with Pocket Internet
Explorer on your Pocket PC. Both computers are updated with changes made
to either list each time you synchronize. Unless you mark the favorite link as
a mobile favorite, only the link will be downloaded to your Pocket PC, and
you will need to connect to your ISP or network to view the content. For
more information on synchronization, see Help on the desktop computer.
Synchronize Mobile Favorites
If you are using Microsoft Internet Explorer 5.0 or later on your desktop
computer, you can download mobile favorites to your Pocket PC.
Synchronizing mobile favorites downloads Web content to your Pocket PC so
that you can view pages while you are disconnected from your ISP and
desktop computer.
Use the Internet Explorer plug-in installed with synchronization tools to
create mobile favorites quickly.
Create a Mobile Favorite
1. In Internet Explorer on your desktop computer, click Tools and then
Create Mobile Favorite.
2. To change the link name, enter a new name in the Name box.
3. Optionally, in Update, select a desired update schedule.
4. Click OK. Internet Explorer downloads the latest version of the page to
your desktop computer.
11-30
5. Synchronize your Pocket PC and desktop computer. Mobile favorites that
are stored in the Mobile Favorites folder in Internet Explorer are
downloaded to your Pocket PC.
If you did not specify an update schedule in step 3, you will need to
manually download content to keep the information updated on your
desktop computer and Pocket PC. Before synchronizing with your Pocket
PC, in Internet Explorer on your desktop computer, click Tools and then
Synchronize. You will see the last time content was downloaded to the
desktop computer, and you can manually download content if needed.
You can add a button to the Internet Explorer toolbar for creating mobile
favorites. In Internet Explorer on your desktop computer, click View,
Toolbars, and then Customize.
Save Pocket PC Memory
Mobile favorites take up storage memory on your Pocket PC. To
minimize the amount of memory used:
In the settings for the Favorites information type in synchronization tools
options, turn off pictures and sounds, or stop some mobile favorites from
being downloaded to the Pocket PC. For more information, see Help.
Limit the number of downloaded linked pages. In Internet Explorer on the
desktop computer, right-click the mobile favorite you want to change and
then Properties. In the Download tab, specify 0 or 1 for the number of
linked pages you want to download.
Companion Programs 11-31
Java
Important!
Only applications from a reliable source may be downloaded, installed,
and executed.
Tap , Programs, and then Java.
You can download Java games, e-books, applications powered by Java
technology to your Pocket PC. Run Java files with the following methods:
Connect to the Internet for downloads: Tap Menu, Install, and then
Browser. A wizard will guide you to connect to the Internet. You can use
Internet Explorer to download some Java files. Follow the onscreen
instructions to complete. The compiled Java applications will be shown in
the Java main page. The wizard will ask you if you want to launch the
application at the last step.
Downloaded Java files: Tap Menu, Install, and then Local Files. Items
transferred from the PC or already downloaded to the Pocket PC, for
example .jar or .jad formats, can be selected. A wizard will guide you,
follow the onscreen instructions to complete. The compiled Java
applications will be shown in the Java main page. The wizard will ask you
if you want to launch the application at the last step.
Compiled Java files: Directly launch from the Java main page.
11-32
Java main page. Tap to launch the item.
Launch highlighted item.
Provides the relevant menu.
For example, select Install and
then Browser to connect to the
Internet and play Java games that
have been downloaded.
Select Install and then Local Files
to launch the items already
downloaded to your Pocket PC.
Use the Left Soft-Key, Right Soft-Key, Navigation button, and the launch
key to control the games, read e-books and other applications.
Maintaining the Pocket PC 12-1
1122 MMaaiinnttaaiinniinngg tthhee PPoocckkeett PPCC //
Backup Utility
Tap , Programs, Utilities, and then Backup Utility.
Backup Utility is used to back up or restore files saved in the Pocket PC.
You can back up personal data such as Calendar, Contacts, Tasks, Personal
profile, Network settings, Messaging (E-mails and SMS), etc.
Storage Space
When making backups, you can choose the following storage spaces:
1. My Documents: Data saved here may disappear when you perform a cold
boot. It is recommended that you use this area only as temporary storage.
2. External storage card.
12-2
Backup Files
Wizard Mode
Tap Backup.
Tap Next Button and the
Wizard will guide through the steps
that follow.
Standard: Switch to the
Standard mode.
Standard Mode
Backup your personal data to a storage space.
Tap the Backup tab.
Tap to check the items for backup.
Tap to select the storage space
from the list. Tap Backup Button to start
the backup.
Advanced Button: Enter the
Advanced settings screen.
Maintaining the Pocket PC 12-3
Advanced Settings Options
Under the Backup Files screen, tap Advanced Button to enter the
Advanced settings screen as shown below.
Check the options as required.
If you check this option, the
Wizard will guide you through the
steps to complete the operation the
next time you open Backup
Utility. Cancel Button
OK Button
If you checked “Auto backup
files,” tap to enter the screen
shown on the left.
Select the backup option. Select the site to backup to.
Pocket PC performs auto backup
when the battery power is low.
To backup regularly, tap to
select “Auto Backup on schedule.”
12-4
If you checked “Auto backup on
schedule,” tap to enter the
screen shown on the left.
Backup frequency.
Tap the date button on the right of
“Starting” to set the starting date.
Tap the time button on the right of
“Starting” to set the starting time.
If you have selected “Weekly,” tap
the function button on the right of
“Every” to set the day of the week
to backup.
If you selected “Manage old
backup files,” tap to enter the
screen shown on the left.
Tap the arrowhead to set the
number of files.
Tap the files to be retained.
Maintaining the Pocket PC 12-5
Restore Files
Caution!
1. When restoring files, the system will delete all current data in the Pocket
PC and replace it with the backup files.
2. To make sure that files can be restored successfully, do not use the Pocket
PC while performing restore.
3. Restore cannot be stopped once it is started. Think carefully before
proceeding.
4. After restore completed, your Pocket PC will reboot.
Wizard Mode
Tap Restore.
Tap Next Button and the
Wizard will guide through the steps
that follow.
Standard: Switch to the
Standard mode.
12-6
Standard Mode
Restore the backup personal data from a storage space.
Tap the Restore tab.
Select “Latest” below “Restore
From.” Or select from the list.
Tap backup file name from the list
under “File Name.”
Tap Restore Button to start
restoring.
Maintaining the Pocket PC 12-7
Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM
(read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory).
You can install any program created for your Pocket PC, as long as your
Pocket PC has enough memory. The most popular place to find software for your Pocket PC is on the Pocket PC Web site (http://www.microsoft.com/windowsmobile/pocketpc/).
Add Programs Using Synchronization Tools You’ll need to install the appropriate software for your Pocket PC on
your desktop computer before installing it on your Pocket PC.
1. Determine your Pocket PC and processor type so that you know which version of the software to install. Tap and then Settings. On the System tab, tap About. In the Version tab, make a note of the information in Processor.
2. Download the program to your desktop computer (or insert the CD or disk that contains the program into your desktop computer). You may see a single *.xip, *.exe, or *.zip file, a Setup.exe file, or several versions of files for different Pocket PC types and processors. Be sure to select the program designed for the Pocket PC and your Pocket PC processor type.
3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions.
4. Connect your Pocket PC and desktop computer.
12-8
5. Double-click the *.exe file.
If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket PC. If the file is not an installer, you will see an error message stating that the program is valid but it is designed for a different type of computer. You will need to move this file to your Pocket PC. If you cannot find any installation instructions for the program in the Read Me file or documentation, use synchronization tools Explore to copy the program file to the Program Files folder on your Pocket PC. For more information on copying files using synchronization tools, see Help.
Once installation is complete, tap , Programs, and then the
program icon to switch to it.
Add a Program Directly from the Internet
1. Determine your Pocket PC and processor type so that you know which version of the software to install. Tap and then Settings. On the System tab, tap About. In the Version tab, make a note of the information in Processor.
2. Download the program to your Pocket PC straight from the Internet using Pocket Internet Explorer. You may see a single *.xip, *.exe or *.zip file, a Setup.exe file, or several versions of files for different Pocket PC types and processors. Be sure to select the program designed for the Pocket PC and your Pocket PC processor type.
3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions.
4. Tap the file, such as a *.xip or *.exe file. The installation wizard will begin. Follow the directions on the screen.
Maintaining the Pocket PC 12-9
Add a Program to the Start Menu
Tap , Settings, the Personal tab, and then Menus.
Check the box for the program.
If you do not see the program listed, you can either use File Explorer on
the Pocket PC to move the program to the Start Menu folder, or use
synchronization tools on the desktop computer to create a shortcut to the
program and place the shortcut in the Start Menu folder.
Using File Explorer on the Pocket PC: Tap , Programs, File
Explorer, and locate the program (tap the folder list, labeled My
Documents by default, and then My Device to see a list of all folders on
the Pocket PC). Tap and hold the program and tap Cut on the pop-up
menu. Open the Start Menu folder located in the Windows folder, tap and
hold a blank area of the window, and tap Paste on the pop-up menu.
The program will now appear on the menu.
12-10
Using synchronization tools on the desktop computer: Use the
Explorer in synchronization tools to explore your Pocket PC files and
locate the program. Right-click the program, and then click Create
Shortcut. Move the shortcut to the Start Menu folder in the Windows
folder. The shortcut now appears on the menu. For more information,
see Help.
Remove Programs
Tap and then Settings. On the System tab, tap Remove Programs.
Tap a program name from the list
under “Programs in storage
memory” to highlight it and then
tap Remove.
If the program does not appear in the list of installed programs, use File
Explorer on your Pocket PC to locate the program, tap and hold the program,
and then tap Delete on the pop-up menu.
Maintaining the Pocket PC 12-11
Manage Memory
View Memory Status
Tap , Settings, the System tab, and then Memory.
Tap the Main tab.
The status of Storage and Program
memory.
Find: Quick link to the Search
program.
Tap the Storage Card tab.
Current storage card memory
status.
Tap to select the built-in or external
storage card.
12-12
Tap the Running Programs tab.
Tap a program name in ”Running
Programs List” and when it is
highlighted, tap Activate or Stop. Activate: Start running the
program you selected.
Stop: Stop the program you
selected.
Stop All: Stop all programs in the
“Running Programs List.”
Find Available Memory
Under certain circumstances such as insufficient memory, the Pocket PC
cannot allocate memory automatically. Try to solve this problem through the
following methods:
Tap , Programs, and then Search.
1. To find files occupying larger
amounts of memory, select “Larger
than 64 KB” for type and tap
Search.
2. Then use File Explorer.
Maintaining the Pocket PC 12-13
1. Tap , Programs, and then File
Explorer. Use File Explorer to
move the files you want to keep to
external storage cards. Tap and hold
the items to be moved, then tap Cut
or Copy on the pop-up menu.
Move to the storage card and then
tap Paste.
2. Use File Explorer to delete files
that you no longer need.
Tap , Messaging, Menu,
Tools, Options, and then the
Storage tab.
Check “Store attachments on
storage card” to save attached files
from E-mails automatically in the
storage card in future.
Tap , Internet Explorer,
Menu, Tools, and then Options.
Tap Clear History and Delete
Files to delete records of websites
that you have browsed.
12-14
Tap , Programs, Notes/Word Mobile/Excel Mobile, Menu, and
then Options.
1. Enter the Notes file list screen.
2. Tap Menu and then Options.
3. Tap the “Save to” function button
and select SDMMC from the list.
This indicates that you are using
your external storage card.
Hereafter, new files will be
automatically saved to this storage
card.
Follw the same operation
procedure for Notes in Word
Mobile and Excel Mobile.
In addition, you can use the Rename/Move or Save As function
provided by the program above to move or save files to the storage card.
Maintaining the Pocket PC 12-15
System Information
Tap , Settings, the System tab, and then System Information.
Tap + or - to display or hide the
system information.
12-16
Voice Commander 13-1
1133 VVooiiccee CCoommmmaannddeerr //
Tap , Programs and then Voice Commander.
Voice Commander is continuous voice recognition application software
in the Pocket PC. Voice Commander allows the user to use their own voice
to dial and control functions. Voice Commander has the following features:
Fully voice-controlled system that allows the user to complete operations
(such as dialing phone or running applications) quickly without using
hands.
Uses Speaker-Independent (SI) recognition technology that allows the user
to use the Pocket PC immediately without having to train or pre-record
for the system.
Provides a Conversational UI for guiding beginners to issue voice
commands through the conversational method. The user can then use
commands easily without any practice.
Provides the Voice tag and “digit model adaptation” function so that the
user can customize personal settings and further increase recognition and
convenience in usage.
The Voice Commander provided with this product does not need
personal training or recording. You can use voice control to operate this
Pocket PC immediately. Try calling out “Solitaire” to play. Tap the Voice
Commander Button on the side of the Pocket PC and when the system
prompts you to “Say Command,” just say “Start Solitaire” and the Solitaire
game screen will appear.
13-2
Starting Voice Commander
Here are two methods for running Voice Commander:
1. Tap , Programs, Voice Commander, and then Voice Commander.
2. Voice Commander Button. The system sets the button on the Pocket PC
as the exclusive “Voice Commander” button. Just press this button to run
Voice Commander.
Show the format of voice
command. Re-Start Button: Restart Voice
Commander.
Menu Button:
Settings: Setup Voice Commander.
Help: About Voice Commander.
Exit: Exit Voice Commander.
Tap , Settings, the
Personal tab, and then
Buttons to redefine the
Voice Commander hot
key or other hardware
buttons.
Voice Commander
Button
Voice Commander 13-3
Voice Command Format
Press the Voice Commander Button on the Pocket PC and enter the
Voice Commander screen.
Voice Name dialing
Usage: Call <Contact> at <Home/Work/Mobile>
Example 1: Call Jennifer Lopez
Example 2: Call Jennifer Lopez at mobile
Voice Show Contact
Usage: Show <Contact> at <Home/Work/Mobile>
Example 1: Show Eric Clapton
Example 2: Show Eric Clapton at work
Voice Digit Dial
Usage: Digit Dial
Example: Digit Dial
(System: What number)
29109088
Start Application
Usage: Start <Application>
Example: Start Calendar
Voice Show Appointment
Usage: Today’s/Tomorrow’s/
This week’s Appointment
Voice Play Music File
Usage: Play <Music file name>
Example 1: Play The Moment
Example 2: Play SHE album
Example 3: Play Music
Goodbye
Usage: Goodbye
13-4
Tips
All the names in Contacts will automatically become recognizable
contacts in the “Voice dialing” syntax. However, if the number of
contacts exceeds 1000 entries, the system will not recognize the
excessive entries. To add these entries to Voice Commander for
recognition, tap Menu and then Settings or run Voice Commander
Settings to check and add these contacts manually for voice recognition.
If your volume is too low or if your surroundings are so noisy that the
system cannot recognize your voice, the system will prompt you “Please
say again.” Adjust the distance between yourself and your Pocket PC or
reduce the noise and try again.
Tips
If the user has a heavy accent that may cause poor voice recognition, use
any of the following methods to train the personal digital adapted model in
order to increase recognition:
1. Tap Menu, Setting, and then the Digit Training tab.
2. Tap Voice Commander Settings and then the Digit Training tab.
Tips
You can also tap Voice Commander, Menu, and then Exit to end Voice
Commander.
If you open another program while using Voice Commander and it
covers the Voice Commander screen, Voice Commander will terminate
automatically.
Voice Commander 13-5
Voice Commander Settings
There are two ways to run Voice Commander Settings:
Tap , Programs, Voice Commander, and then Voice Commander
Settings.
Tap Menu and then Settings while using Voice Commander.
Voice Commander Settings allows the user to personalize the Voice
Commander settings, add and remove contacts or applications within the
recognition range, record voice tags or play commands to prompt the user on
how to say the correct command.
Contacts Settings Page
Tap Voice Commander Settings and then the Contacts tab. The setting
page will list all the names and their status (whether or not it is selected, with
or without voice tag) in Contacts.
Check box function
If a contact is checked, it can be
identified normally. If unchecked,
this indicates that it is not within
the recognizable range. Please
create a voice tag.
Lips icon: Voice tag is built.
Tap a contact name to highlight it
for using with
buttons.
13-6
Play Button: Play the recorded voice tag for this contact and hear
how it is pronounced.
Build Button: Record the voice tag for this contact again.
Delete Button: Delete the voice tag for this contact.
Contacts tab: Sets the voice commands for Contacts. Application tab: Sets the voice commands for applications.
Digit Training tab: Sets the voice command for digital dialing.
Advanced Settings tab: Sets the length and sensitivity for digital dialing.
For example, record Alex Cooper in Contacts as Sweet Heart.
1. Tap Alex Cooper.
2. Tap Build Button.
3. When you hear a beep, say the words “Sweet Heart” that you want to
record.
4. When you hear a second beep, say “Sweet Heart” again.
5. After recording twice, the system will play the voice you just recorded to
indicate that you have created a voice tag.
6. At this time, a Lips icon appears to the right of your contact, Alex
Cooper, to indicate that there is a voice tag created for this name. This is
helpful in identifying which contacts already have voice tags.
7. To create another voice tag, tap Build Button and repeat the steps
above.
8. Tap Delete Button to remove the voice tag. The system will then
restore the default voice for Alex Cooper.
Voice Commander 13-7
Tips
You can choose which Contacts are to be added to the recognizable range
of the Voice Commander. By default, the system automatically adds all
names within the recognizable range.
If the number of Contacts exceeds 1000 entries, the system will not
recognize the excessive entries. To add these contacts to Voice
Commander for recognition, manually check the check boxes in front of
the contact entries.
13-8
Application Settings Page
Tap Voice Commander Settings and then the Application tab and the
Settings page will list the applications and settings installed by the Pocket PC
on and then Programs (whether or not it is selected, with or without
voice tag).
You can choose which applications are to be added to the recognizable
range of the Voice Commander. By default, the system automatically adds
all applications as recognizable targets in the < Application > syntax in
“Voice open application.” No matter when you install a new application, the
system updates immediately and adds the new application within the
recognizable range. This helps you save time spent in finding applications.
Check box function If the application is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. If the check box is gray and cannot be checked, this indicates that the item is unrecognizable. Build a voice tag to add a gray item into the recognizable range.
Lips icon: Voice tag is built. Tapped application name is highlighted and can be used with
functions. Play Button: Play the recorded voice tag for this application and hear
how it is pronounced. Build Button: Record the voice tag for this application again. Delete Button: If there is a Lips icon, the voice tag for this
application can be deleted and restored to the default system voice.
Voice Commander 13-9
Application example: You want to record Windows Live™ Messengers
as “Chat room.”
1. Tap Windows Live™ Messengers.
2. Tap Build Button.
3. When you hear a beep, say the words “Chat room” that you want to record.
4. When you hear a second beep, say “Chat room” again.
5. After recording twice, the system will play the voice you just recorded to
indicate that you have created a voice tag.
6. At this time, a Lips icon appears to the right of Windows Live™
Messengers to indicate that there is a voice tag created for this application
name. This is helpful in identifying which applications already have voice
tags.
7. To create another voice tag, tap Build Button and repeat the steps
above.
8. Tap Delete Button to remove the voice tag. The system will then
restore the default voice for Windows Live™ Messengers.
13-10
Music Settings Page
Tap Voice Commander Settings and then the Music tab, the settings
page will list the music files and configuration status of the specify folder in
your Pocket PC or on your storage card.
If you add a new music file, the system will update in real-time,
automatically adding the file to your recognizable range, saving you the time
of searching for your music files.
The system will automatically activate music files stored in the
following folders:
1. All folders on your storage card.
2. The My Documents folder in your Pocket PC, or any folder that is inside
the My Documents folder.
3. If you want to transfer the files to your Pocket PC via the synchronization
tools, then you must put the files in either the Playlists folder or the Music
folder.
Voice Commander 13-11
Check box function
If the music file name is checked, it
can be identified normally. If
unchecked, this indicates that it is
not within the recognizable range.
If the check box is gray and cannot
be checked, this indicates that the
item is unrecognizable. Build a
voice tag to add a gray item into
the recognizable range. Lips icon: Voice tag is built.
Tapped music file name is highlighted and can be used with
functions.
Play Button: Play the recorded voice tag for this music file name and
hear how it is pronounced.
Build Button: Record the voice tag for this music file name again.
Delete Button: If there is a Lips icon, the voice tag for this music file
name can be deleted and restored to the default system voice.
13-12
Advanced Settings Page
The Sensitivity setting is for voice recognition. The “Length of phone
number” setting specifies the maximum number of digits that can be entered
as the phone number. These settings will improve recognition accuracy.
Sensitive: When you use this
setting, the voice recognition
system is not as strict while
performing voice recognition tasks,
in other words, under this setting
the system will respond to your
voice most of the time and you
won’t have many non-responsive
situations. You should set the
system to Sensitive when in
continually noisy environments, for
example when on a train or in a
factory, etc. Normal: Normal is the default setting and is best for the average
environment.
Accurate: Under the Accurate setting, the system is more strict when
performing voice pattern matching. Recognition errors are less likely to
occur when you set the system to Accurate.
Voice Commander 13-13
FAQ
Question: I want to make a call to my friend Andy Miller, but I’m tired of
reading manuals. What do I need to know if I just want to
make phone calls?
Answer: Make sure you have Andy Miller’s name and phone number in the
contact database. Press the Voice Commander Button, and say
“Call Andy Miller.” The system will guide you through it.
Question: I added a new contact but it is not recognized.
Answer:
1. The system only recognizes English words and characters or digits. Any
symbols or marks will be ignored. However you can still make a voice tag
for these items.
2. When the number of contacts exceeds 1,000 entries, the system will not
recognize the excessive entries, until activated manually by the user.
3. To have a look at the status of the contact’s voice command attributes,
please go to the Contacts setting page in Voice Commander Settings.
Question: I recorded a voice tag for my friend last month, but I forgot
what I recorded. Do I need to redo the recording?
Answer: No! Just tap Voice Commander Settings, the Contacts tab, select
the contact, and then tap Play Button.
13-14
Question: I performed digit training today, but I found that the accuracy
is worse than before, what do I do now?
Answer: You can retry the digit training again in a “quiet” place. And if it
still doesn’t help, disable the adapted model and use the default one.
To disable the adapted model, tap Voice Commander Settings, the
Digit Trainer tab, and then uncheck “Use adapted model.” Or just
tap Remove All Button to remove the model. It will save you
some memory this way.
Question: I accidentally activated Voice Commander, how can I abort
it?
Answer: Say “Goodbye.”
Specifications 14-1
1144 SSppeecciiffiiccaattiioonnss //
Item Description
Operating system Windows Mobile® 6 Professional
Processor Samsung S3C 2442, 500 MHz
Memory 256 MB Flash ROM, 64 MB SDRAM
Display 2.8", 240 x 320 (QVGA), 65,536 colors, TFT-LCD
M810
Communication
HSDPA / UMTS (2100/1900/850 MHz)
GSM Quad-band 850/900/1800/1900 MHz
EDGE class 10, GPRS class 10
Bluetooth® v2.0 Class 2 + EDR
WiFi IEEE 802.11b/g
M750
Communication
GSM/EDGE Quad-band: 850/900/1800/1900 MHz
GPRS/EGPRS Class B, Multi-slot Class 10
Bluetooth® v2.0 Class 2 + EDR
WiFi IEEE 802.11b/g
GPS Built-in GPS module (SiRF Star III)
TMC function supported * (* subject to change by
region)
Expansion slot MicroSD
M810 Camera 2M pixels auto-macro with flashlight, up to
1600x1200 resolution
0.3M pixels fixed-focus Camera for conference call
usage
M750 Camera 2M pixels auto-macro with flashlight, up to
1600x1200 resolution
Design and specifications are subject to change without notice.
14-2
Item Description
Software Support Application and games: Java support
Java applications: Supports MIDP 2.0, CLDC 1.1
Digital Rights Management: Supports OMA DRM
1.0
Interface/Audio Built-in microphone and speaker
External stereo headset jack
Interface/Data USB Sync, headset jack
Power supply Battery: 1530 mAh Li-Ion Polymer, rechargeable,
replaceable
AC Adapter: 100~240 VAC/50~60 Hz, 5V/1A DC
Environmental
temperature
Daily operation: 0°c ~ 40°c; storage: -10°c ~ 50°c
Environmental
humidity
45% ~ 85%
Dimensions 109.5 x 59 x 17.5 mm
179 g including battery
Optional
accessories
Battery, Car charger, Car mount
Regulation Notice and Safety Declaration 15-1
1155 RReegguullaattiioonn NNoottiiccee aanndd SSaaffeettyy
DDeeccllaarraattiioonn //
SAR Information
Read this manual carefully before using.
Warning: Reduced electromagnetic waves. Please use properly.
Model M810 M750
GSM Head 0.436 W/kg@10g 0.407 W/kg@10g
DCS Head 0.277 W/kg@10g 0.117 W/kg@10g
WCDMA2100 Head 0.471 W/kg@10g --
15-2
Health and Safety Information
Electrical and Battery Safety
Use only the AC adapter provided with this product. Do not use similar
items from other products. The provided AC adapter is for use with this
product only. Do not use it for other electrical products.
Follow the specifications of the battery manufacturer: Avoid charging the
battery when the environmental temperature is higher than 45ºC. Do not
store or use the battery when the environmental temperature is higher than
50ºC. Otherwise, battery expansion or leakage may occur.
Do not attempt to disassemble, pound, pierce or damage the battery to
avoid causing injury, danger or risk.
Application Environment Safety
Do not directly expose the Pocket PC to any of the following
environments: rapid changes of temperature, high temperature (such as
direct exposure to sunlight or stoves), extremely low temperature, high
pressure, areas with electrostatic discharge interference or dusty and
humid places. Do not soak or wet the Pocket PC with water or any other
liquid.
Do not place the Pocket PC near electrical appliances (such as TVs,
computers, scanners, disc players, faxes, hair dryers, etc.) that may
generate electrostatic discharge interference.
Never drop the Pocket PC nor subject it to strong impact.
Do not use ordinary pen or any object with a sharp tip to tap the Pocket
PC cover or screen (LCD panel) to avoid damaging and scratching the
surfaces.
Do not use corrosive or volatile liquids to wipe the Pocket PC. If
necessary, use a soft cloth or tissue to wipe the Pocket PC.
Regulation Notice and Safety Declaration 15-3
Warranty Security
In case the Pocket PC is damaged, kindly return it to your place of
purchase. Do not attempt to disassemble this device on your own as this
may void the warranty.
If any hazards result from the failure of the user to comply with usage
rules, we will not be held responsible for any resulting warranty claims.
Data Security
This company is not responsible for any data loss or damage to the Pocket
PC due to improper use. Record important data in your notebook
separately or use the USB accessories that come with this product to save
important data to your computer or storage card.
Privacy Restrictions
Some countries require full disclosure of recorded telephone
conversations, and stipulate that you must inform the person with whom
you are speaking that the conversation is being recorded. Always obey the
relevant laws and regulations of your country when using the rewording
feature of your Pocket PC Phone.
IMPORTANT SAFETY PRECAUTIONS
When using this product, the safety precautions below must be taken to
offset possible legal liabilities and damages.
Safety in airports, medical facilities, and inflammable environments
When aboard an aircraft, at a medical facility, or at the gas pump where
wireless communication devices are prohibited, please launch the
Wireless Manager and then tap the button. When the color of the
icon turns orange , the Flight Mode is activated and the wireless
connection of the Pocket PC is disabled.
15-4
Safety In Aircrafts
Due to the possible interference caused by this product to an aircraft's
navigation system and its communications network, using this product on
board an airplane is against the law in most country.
Interference With Medical Equipment Functions
This product may cause medical equipment to malfunction. The use of
this device is forbidden in most hospitals and medical clinics.
Environment Restrictions
Do not use this product in gas or refueling stations. The use of this
product is also prohibited in fuel storehouse, chemical plants, and
locations containing explosives.
Safety For Environments
Do not use this product in gas station, fuel depots, chemical plants or
where blasting operations are in progress, or in potentially explosive
atmospheres such as fueling areas, below deck on boats, fuel or chemical
transfer or storage facilities, and areas where the air contains chemicals or
particles, such as grain, dust, or Mattel powders. Please be aware that
Sparks in such areas could cause an explosion or fire resulting in badly
injury or even death.
Regulation Notice and Safety Declaration 15-5
Explosive Atmospheres
When in any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and user
should obey all signs and instructions. Sparks in such areas could cause an
explosion or resulting in bally injury or even death. Users are advised not
to use the equipment at refueling points such as service or gas stations.
Users are reminded of the need to observe restrictions on the use of radio
equipment in fuel depots, chemical plants or where blasting operations are
in progress. Areas with a potentially explosive atmosphere are often, but
not always, clearly marked. These include fueling areas, below desk on
boats, fuel or chemical transfer or storage facilities, and areas where the
air contains chemicals or particles, such as grain, dust, or metal powders.
Nonionizing Radiation
This product should be operated in the suggested normal condition only to
ensure the radioactive performance and safety of the interference. As with
other mobile radio transmitting equipments, user are advised that for
satisfactory operation of the equipment and for the safety of personnel, it
is recommended that no part of the human body be allowed to come too
close to the antenna during operation of the equipment.
Road Safety
Vehicle drivers in motion are not permitted to use telephone service with
handheld devices, except in case of emergency. In some countries, using
hand-free devices as an alterative is allowed.
15-6
FAQ 16-1
1166 FFAAQQ //
1. What features does the Pocket PC have?
Answer: Built-in 802.11b/g wireless networking module. The built-in camera module’s sensitization, filming quality are better than other brands of Pocket PC in the same class. The latest Windows Mobile® 6 Professional operating system, with all its settings stored on a Flash ROM. You won’t have to worry about losing your data even if the Pocket PC runs completely out of power. The extra-large Flash memory space is capable of storing a large amount of personal data and application programs.
2. How do I configure the wireless network? And how do I connect to
the Internet?
Answer: Wireless Manager will assist you in managing your Bluetooth
devices, GSM mobile devices, and your wireless networks. When you purchase credit points for connection to the Internet via a wireless connection, you will be given an IP address, DNS name server address, Proxy server, connection port number, and network key information, you will need this information to successfully connect to the Internet. Sometimes corporate networks may need additional information, please contact your company’s network administrator for details. If you are using your wireless network for the first time, please refer to the “Configure your Wireless Network” section and set the necessary configurations. In general, you can activate the wireless connection by tapping the icon in Wireless Manager. When your Pocket PC detects and connects to a available wireless network, a icon will appear on the top of your screen, this means that your Pocket PC has successfully connected with a network hotspot (Access Point). At this time, the indicator on the upper left of your pocket PC will flash amber.
16-2
3. My Pocket PC cannot boot. What should I do about it?
Answer:
Make sure the Pocket PC battery you use still has enough power.
Plug your Pocket PC into the charger, and make sure the red charging
indicator lights up. Press the “Power Button.”
If you have done the above but your Pocket PC still cannot boot, proceed
with the following step: Remove the Pocket PC back cover, and check the
battery lock is in place. If not, the system cannot be started.
4. My Pocket PC has a screen freeze or the system does not respond.
What should I do about it?
Answer:
You may reset your Pocket PC. It means to re-start the whole system to
release unnecessary resources so that the system can return to normal.
If you have reset your Pocket PC but it still cannot operate normally, then
you need to carry out a cold boot to solve this problem.
How to carry out a cold boot: Press and hold the “Power Button” with one
hand, and use the stylus tip to press the “Reset Button” with the other hand.
Release the “Power Button” and the “Reset Button” at the same time. If
you answer “Yes” to the question displayed after a cold boot. (Erase
all data and load default?) The programs installed by yourself,
self-made settings, and self-made data (e.g., “Contacts” and
“Calendar”) will disappear. And return to their default settings.
As a result, we suggest you copy your data to the storage card. Data stored
in the storage card will not vanish because of a cold boot. Or you can
synchronize the data on your Pocket PC with your desktop computer.
FAQ 16-3
5. Why doesn’t my Pocket PC make any sound?
Answer:
Tap the speaker icon on the top right of the screen, then select the
volume control options, or adjust the volume of the incoming call sound.
Alternatively, you may use the volume control key to control the volume.
6. Why does my Pocket PC screen automatically become dark?
Answer: Tap , Settings, the System tab, Backlight, and then the
Battery power or the External power tab. You may find that if you use
battery power, the backlight automatically shuts down after 30 seconds by
default; the external power shuts down after 1 minute by default. If you
think these times are too short, you may extend them as needed.
7. When I want to open a program or file, a warning message “Not
enough memory” pops up. What should I do about it?
Answer: Because your Pocket PC’s memory is shared by storage memory
and program memory, the following methods are available. You may
choose the one that works best for you.
Remove the programs you installed or that are not frequently used to
release program memory space.
Delete data that is not used frequently or unnecessary to release storage
memory space.
16-4
8. The characters on the screen are too small to read. How can I
enlarge them?
Answer: Tap , Settings, the System tab, Screen, and then the Text
size tab. You may adjust the text size as you wish. Also, you may select the
landscape orientation in the General tab screen. Try and change them so
that you can read more smoothly.
9. The contact point of my stylus is not quite precise. What should I do
about it?
Answer: Align the screen in place, and the touch screen can respond to the
operation of your stylus more precisely. The following two ways will bring
you into the touch screen calibration mode.
Tap , Settings, the System tab, Screen, and then Align Screen
Button.
Simultaneously press the Left Soft-Key on the bottom-left of the Pocket
PC and the round execution button in the center of the navigation pad.
10. The hardware buttons of my Pocket PC doesn’t make any
response or calls a wrong program. What should I do about it?
Answer: Tap , Settings, the Personal tab, and then Buttons. Check
each button for correct setup.
FAQ 16-5
11. My Pocket PC's Activesync cannot be executed or make a
connection. What should I do about it?
Answer:
Make sure you have installed Activesync version 4.5 or above. The
companion CD contains the software. If you have lost the CD, you may
download it from the Microsoft Website.
Make sure the charger as well as the USB cable provided along with the
product are already connected up to your PC end. Make sure you are not executing another program that uses the same serial
port you selected for operation during installation. If your Activesync is still not working, remove and delete the old version
of Activesync software at the PC end and install it once again.
12. My PC uses Windows Vista™ operating system, how will it handle
the Pocket PC connection?
Answer:
Please make sure that the Windows Mobile® Device Center included in the
companion CD is installed.
Make sure that the included USB cable is properly connected to the PC
port.
13. My PC currently has Microsoft Outlook installed, will it work with
the Pocket PC?
Answer: Refer to the download link which you can see in the companion
CD. If your current Microsoft Outlook version is older than that, uninstall
the older version, then install the Microsoft Outlook limited trial version.
When the trial period is over, contact with Microsoft for more information
on purchasing the retail version.
16-6
Index 17-1
1177 IInnddeexx //
3 3.5 G video telephony · 4-1
A About · 2-10
AC Adapter · 1-1
ActiveSync · 2-7, 6-9, 9-10
ActiveSync Setup Wizard · 6-7
Add Ringtone · 2-6, 4-14
Adding or Removing Programs · 12-7
Adjust earphone volume · 4-5
Adjust volume · 5-7
Adjust Volume · 5-7
Adjusting Settings · 5-1
Adjusting the Phone Volume · 4-4
Align Screen · 2-1
Answer a call · 4-6
Antenna · 2-3
Application Recovery · 2-7
B Back cover · 1-3
Backlight · 1-12, 2-10, 5-4
Backup Files · 12-2
Backup Utility · 2-7, 12-1
Band Selection · 2-11, 7-8
Battery · 1-1, 1-6, 1-8, 1-9, 4-2
Beam · 2-11
Birthday Reminder · 2-7, 9-19
Block Recognizer · 2-29
Bluetooth · 2-11, 7-9, 7-10
Browse the Internet · 11-27
Bubble Breaker · 2-6
Built-in camera lens · 1-3
Buttons · 2-9, 5-13
C Calculator · 2-7
Calendar · 2-7, 11-2
Call Filter · 2-6, 4-24
Call History · 4-12
Camcorder · 1-3
Camera · 2-6, 10-1, 10-3, 14-1
Camera button · 10-3
Camera for Video call · 4-5
Camera hot key · 1-3
Certificates · 2-10
Charging · 1-7
Chatting with Contacts · 9-15
Clean Boot · 1-13, 1-16
Clock & Alarms · 2-10
Cold boot · 1-17
Command Bar · 5-11
Communication · 14-1
17-2
Connect GPRS · 7-6
Connection · 3-4
Connection Wizard · 2-11, 7-2
Connections · 2-11, 7-1
Contacts · 2-7, 11-6
Create a Contact · 11-7
Create a Note · 11-14
Create a Task · 11-11
Create an Appointment · 11-3
CSD Line Type · 2-11, 7-14
D Default Settings · 1-13, 1-15, 2-7
Dial · 4-6
Digital Rights Management · 4, 14-2
Dimensions · 14-2
Direct Push Technology · 9-10
Disconnect GPRS · 7-6
Display · 1-3, 14-1
Drag · 1-10
Draw on the Screen · 2-33
E Earphone · 4-3
E-mail · 9-5, 9-7
End a call · 4-6
End button · 1-3
End Button · 4-3, 4-5
Enter Information · 2-22
Excel Mobile · 2-6, 11-18
Expansion slot · 14-1
F Favorites · 11-28
File Explorer · 2-8, 5-10, 12-13
Find a Contact · 11-8
Find Information · 5-10
Flashlight LED · 1-3
Flight Mode · 2-16
FM Tuner · 2-6, 10-18
Free memory · 5-9
Fully charge the battery · 1-8
G Getting Started CD · 1-1, 6-2, 6-4
GPRS Connection · 7-3
GPRS Settings · 2-11, 7-7
GPS · 3-2, 14-1
GPS Viewer · 2-7, 3-9
H Hardware installation, ActiveSync ·
6-4
Hardware installation, WMDC · 6-2
Headset connector · 1-3
Headset Volume Limiter · 2-10, 5-6
Hidden antenna for Cell Phone · 1-3
Index 17-3
I Image Maker · 2-6, 10-14
Image Wizard · 2-6, 10-16
Input · 2-9
Input Panel button · 2-27
Install the external headset · 4-3
Installing ActiveSync · 6-4
Installing the Battery · 1-6, 4-2
Installing the SIM Card · 1-6, 4-2
Interface/Audio · 14-2
Interface/Data · 14-2
Internet Explorer · 2-7, 11-26, 11-27
Internet Sharing · 2-8, 7-13
J Java · 2-8, 11-31
Java support · 14-2
L LED indicator · 1-3, 1-8
Left Soft-Key · 1-3, 1-5
Letter Recognizer · 2-29
Location SMS · 2-7, 3-7
Lock · 2-9
M M-Desk · 2-7, 2-20
Memory · 2-10, 12-11, 14-1
Menus · 2-9, 12-9
Messages · 9-1
Messaging · 2-7, 9-1
Messenger · 2-7, 9-12
Microphone · 2-10, 4-3, 5-5
MicroSD slot · 1-3
Microsoft® ActiveSync® · 6-3
Microsoft® Internet Explorer Mobile ·
11-26
Microsoft® Pocket Outlook · 11-1
Mini USB connector · 1-3
MMS · 9-16
MMS Message · 2-6, 9-16
Multimedia Manager · 2-6, 10-11
Mute · 5-7
Mute mode · 4-4
N Name Cards Management · 10-23
Namecard Manager · 2-6, 10-20
Navigation Bar · 2-4, 5-11
Navigation button · 1-3
Notes · 2-7, 11-13
Notifications · 5-2
O Operating system · 14-1
Organize Information · 5-10
Owner Information · 2-9
P Phone · 2-9, 4-1
Phone Receiver · 1-3, 4-3
Phone Speaker · 1-3, 4-3
17-4
Pictures & Videos · 2-7
Pocket PC · 1-1
Pop-up menus · 5-12
Power · 1-11, 2-10, 5-3
Power button · 1-3
Power Button · 1-10, 1-11, 1-12, 4-2
Power Off Mode · 1-10
Power supply · 14-2
PowerPoint Mobile · 2-6, 11-21
Preview mirror · 1-3
Processor · 14-1
Programs · 2-6
Q Quick link · 2-3
QuickBar · 2-7, 2-19
QWERTY Keyboard · 1-4, 2-23
R Read and Reply · 9-9
Record a Message · 2-34
Redefine Hot Keys · 5-13
Regional Settings · 2-10
Remove Programs · 2-10, 12-10
Reset · 1-13, 1-14
Reset button · 1-3
Reset Button · 1-14
Restore Files · 12-5
Right Soft-Key · 1-3, 1-5
S Satellite Data Update · 2-7, 3-4
Satellite Navigation · 3-1
Scenarios · 2-6, 5-8
Screen · 2-1, 2-10
Search · 2-8, 5-10, 12-12
Select a Drawing · 2-34
Select Writing · 2-32
Send and Receive Mail · 9-8
Send button · 1-3
Send Button · 4-3, 4-5
Signal Indicator · 4-10
SIM card · 1-6, 4-2
SIM Manager · 2-6, 4-15
SIM Toolkit · 4-19
Sleep mode · 1-11
Smart Dialing · 4-9
SMS · 4-20, 9-7
SMS Sender · 2-6, 4-20
Soft Keyboard · 2-29
Software installation, WMDC · 6-2
Solitaire · 2-6
Sounds & Notifications · 2-9
Spb Mobile Shell · 2-3, 2-10, 2-12
Speaker · 1-3, 2-3
Speakerphone · 4-4, 4-9
Speed Dial · 2-6, 4-11, 4-21
Start · 2-3
Start a chat · 9-14
Index 17-5
Start Menu · 12-9
Storage Space · 12-1
Streaming Player · 2-7, 11-24
Stylus · 1-1
Stylus holder · 1-3
System Information · 2-10, 12-15
T Tap · 1-10
Tap and hold · 1-10
Task Manager · 2-7, 5-9
Tasks · 2-7, 11-10
Time · 2-3
Today · 2-9
Today screen · 2-3
Touch screen · 1-3
Touch the Screen · 1-10
Transcriber · 2-30
Turn off Phone · 7-6
Turn off the phone · 4-6
Turn on Phone · 7-5
Turn on the phone · 4-6
U USB Cable · 1-1
USB Synchronization · 6-6
USB to PC · 2-11, 6-6
Using the Stylus · 1-10
V Vibrate · 5-7
Vibration mode · 4-4
Video Call · 4-7
Video conference camera · 1-3
Voice Command Format · 13-3
Voice Commander · 1-3, 2-7, 2-36,
13-1, 13-2
Voice Commander Button · 2-36
Voice Commander hot key · 13-2
Voice Commander Settings · 2-7,
13-5
Volume control key · 1-3
W Windows Live · 2-7
Windows Live™ Messenger · 9-12
Windows Media · 11-22
Windows Media Player · 2-7, 11-22
Windows Mobile® Device Center ·
6-1
Wireless LAN · 7-15, 8-1
Wireless Manager · 2-8, 2-16, 4-6,
7-15, 8-2
WLAN Utility · 2-7, 8-5
Word Mobile · 2-6, 11-15
Write on the Screen · 2-31
17-6
First Version: May 2008 Current Version: May 2008, Version 1 Number: 20080430