Starterkits and Evaluation Boards for COM Express™» For COM Express™ modules:
ETXexpress®, microETXexpress®, nanoETXexpress
» For quick evaluation purposes
» Starterkits include all required hard- and software for immediate start
» Starterkits and Evaluation Boards «» Starterkits and Evaluation Boards «
2 www.kontron.com
COM Express™ Starterkits and Evaluation Boards
Starterkits
Technical Information
Evaluation Board COM Express™ Eval Type 2, for COM Express™ Pin-out Type 2 compatible modules
Power Supply Switchable ATX PSU 115V/230V ~
Mass Storage USB stick with manuals and datasheets
Documentation Manuals and datasheets are included
Mounting Kit Screws and washers to mount heatspreader and module onto the evaluation board
Supported Modules Any Kontron COM Express™ Type 2 compatible board is supported, i.e. ETXexpress® and microETXexpress® modules. Module must be ordered separately
COM Express™ miniStarterkit Type 2
Technical Information
Evaluation Board COM Express™ miniBaseboard Type 2, for COM Express™ Pin-out Type 2 compatible modules
Power Supply PicoATX 120W and 12 V PSU for running the ETXexpress® miniBaseboard
Mass Storage USB stick with manuals and datasheets
Documentation Quickstart Manual, datasheets and How-tos
Mounting Kit Screws and washers to mount heatspreader and module onto the evaluation board
Supported Modules Any Kontron COM Express™ Type 2 compatible board is supported, i.e. ETXexpress® and microETXexpress® modules. Module must be ordered separately
The reduced size makes it fitting perfectly in environments with strict space limitations. Although the carrier board does support ETXexpress® (COM Express™ basic, 125x95mm), its size makes it the first choice for microETXexpress® modules (COM Express™ compact, 95x95mm).
Starterkits are complete care-free kits packaged in a single case. They give you a head start: Starterkits include an Evaluation Board which provides an easy plug-in of COM Express™ modules and line-up many connectors and
COM Express™ Starterkit Type 2
jacks. Those complete packages include everything needed for an immediate and efficient start and evaluation: PSU, Mass Storage, Documentation and cooler.
Please order separately your COM Express™ module with Cooling Solution and memory modules.
A universal starterkit offering all common interfaces and accessoires.
Ordering Information
Article Part-No. Description
COMe Starterkit Type 2 38100-0000-00-S COM Express™ Starterkit for Pin-out Type 2 w/o module, heatspreader and memory
COMe miniStarterkit Type 2 36100-0000-00-S COM Express™ miniStarterkit for Pin-out Type 2 including Power Supply, Cables and miniBaseboard
3 www.kontron.com
These Evaluation Boards can be populated with Kontron COM Express™ compatible modules. They bring out a complete array of connectors. Evaluation Boards minimize installation requirements and reduce
COM Express™ Starterkits and Evaluation Boards
Technical Information
Hard Disk 4x SerialATA 1x PATA (40 pins for 3.5“ Hard Disks) 1x CF-Card
Ethernet 1x 10/100/1000 MBit Ethernet magnetic connector
Legacy Interfaces 2x COM connector (1x pin-header) 1x LPT connector (pin header)
Video Interfaces 1x VGA 1x FFC Connector for JILI/LVDS panels 1x TVout
USB 6x USB 2.0 ports (rear panel)
PCI 3x PCI Slot, 1x Slot for miniPCI
PCI Express PCI Express Graphics 1x16 lanes 3x PCI Express x1 lanes 2x Slots for miniPCIe
Sound HD-Audio with 6 jacks
Form Factor ATX form factor, 305 x 244 mm
Supported Modules Any Kontron COM Express™ Type 2 compatible board is supported, i.e. ETXexpress® and microETXexpress® modules. Module must be ordered separately
Power Connector ATX, 24 pins + ATX 12V, 4 pins
Temperature Operation: -5° to 70°C Storage: -30° to 85°C
Humidity Operation: 10% to 90% Storage: 5% to 95% (non dondensing)
Evaluation Boards
Technical Information
Hard Disk 4x SerialATA 1x PATA (40 pins for 3.5" Hard Disks) 1x SD Card
Ethernet 1x 10/100/1000 MBit Ethernet magnetic connector
Legacy Interfaces 2x COM connectors (pin header) 1x LPT connector (pin header)
USB 6x USB
PCI 1x Slot
PCI Express 1x PCI Express x1 lane 1x Express Card connector on backside
Video Interfaces 1x DVI-D 1x VGA 1x FFC Connector for JILI/LVDS panels
Sound HD Audio with 6 jacks on rear panel, 2 jacks on pin-header
Form Factor 170 x 145 mm
Supported Modules Any Kontron COM Express™ Type 2 compatible board is supported, i.e. ETXexpress® and microETXexpress® modules. Module must be ordered separately
Power Connector ATX, 20 pins + ATX 12V, 4 pins
Temperature Operating: 0 to +60°C Storage: -30 to +85°C
Humidity Operating: 10% to 90% (non condensing) Non operating: 5% to 95% (non condensing)
COM Express™ miniBaseboard Type 2
dramatically design time. They help to control and cut-back pre-market costs. Evaluation boards are recommended for testing in every design-in. Evaluation boards does not include any power supply, module, cooling solution, memory or display.
COM Express™ miniBaseboard significantly differs in size: 170 x 145mm allows evaluation in small and size-ciritcal situations.
COM 1 TV out
Gigabit Ethernet HD-AudioVGAPS/2 Keyboard
244 mm
PS/2 Mouse
COM Express™ Eval Type 2
305 mm
3x PCI
ATX ATX, 12V
2x miniPCIe
PATA
LPT
CF-Card Express Card
miniPCI
3x PCI Express x1PEG x164x SATACOM 2
LVDS
3x Fan
Gigabit Ethernet
HD Audio with PDIF 6x USBDVI-D
VGA
170 mm
145 mm
ATX
PCI Express
PCI
2x COM
SPI
4x SATALVDSATX, 12V
PATA
PWM Fan
SD Card
Feature Connector
Front Panel Audio
LPT
6x USB
4 www.kontron.com
COM Express™ Starterkits and Evaluation Boards
Technical Information
I/O Features 2 SATA standard connector PCI Express - 1 PCIexpress x1 Slot - 2 PCIexpress x16 Slot, electrically x1 - 1 Express Card (PCIe plus USB port 5)PCIe to PCI bridge PEX8112 - 2 PCI 32 Bit slots SD card slot shared with GPIO pin header Onboard RTC Battery Power / Reset Button LID/Sleep button SPI/LPC Firmware Hub socket for external BIOS 4 digit Port 80/81 POST code display Winbond 83627 LPC-I/O - 2 serial Ports on DSUB9 - LPT pin header / PWM fan / Hardware monitor2 serial port (TX/RX) connector (KAB-DSUB9-3) Feature connector (I²C, SMB, Power control)
Ethernet 10/100/1000 MBit LAN RJ45 connector on rear panel
USB 6x USB 2.0 rear connectors (USB port 0, 1, 2, 3, 4, 6) 1 USB client (USB port 7)
Graphic DVI-D, SIL1364 SDVO to DVI LVDS FFC40 connector
Sound Onboard HD Audio Codec Realtek ALC888 Analog 7.1 Audio, optical S/PDIF out and digital S/PDIF in & out
Power Supply ATX power supply 24 + 4 pin Status Led
Form Factor ATX Baseboard size; 12“ x 9,6“
Supported Computer- on-Modules
COM Express™ Rev. 2.0 Pin-out Type 1 + Type 10 ultra size specification compatible COMs (nanoETXexpress) COM must be ordered separately
COM Express™ Eval Type 10
The evaluation board for nanoETXexpress is designed to allow embedded application developers to get up and running quickly on the nanoETXexpress modular platform, giving them a head start on the total system design. Simply select an Type 1 or Type 10 nanoETXexpress CPU module, then Plug & Go.
Ordering Information
For a complete delivery with customer samples following articles are necessary:
Article Part-No. Description
COMe Eval Type 10 34101-0000-00-1 COM Express™ Evaluation board COM Express™ Rev. 2.0 Type 10 + Type 1
COMe Eval Type 2 38104-0000-00-0 Evaluation carrier board for COM Express™ modules Pin-out Type 2
COMe miniBaseboard Type 2 38102-0000-00-1 Application carrier board for COM Express™ modules Pin-out Type 2
210 mm
305
mm
SATA
DVIUSB Client
Gigabit Ethernet
COM RS232
HD Audio Optical S/PDIF
PCI Express PCI
GPIOSeriellTX/RX
SD card Slot
LVDS
USB
5 www.kontron.com
COM Express™ Starterkits and Evaluation Boards
Technical Information
Evaluation Baseboard
COM Express™ HMI Baseboard Type 1 Small form factor 120 x 70 mm; Max component height below 18mm
Display 1x Display PM070WL4, 7“ WVGA 800x480, with assembled backlight cable
Power Supply 12V PowerSupply PAA060F, with power cable
Cables 2x USB socket, KAB-USB-1 2x CAN socket, KAB-CAN-1 (one for COM2/one for CAN) 1x RS232 socket (COM1), KAB-DSUB9-3 1x RS485 socket (COM2) 1x JILI cable, KAB-JILI30-TSLD01 1x USB cable for touch controller, ETP-CB-SXU00
Other Features 1x USB touch controller, ETP-MB-4000UACG 1x Audioboard, B08700-KAB-XX-XX01, with cable
Software BSP for WIN CE 6.0, WIN XP; WIN CE 6.0 demo image, QNX® Neutrino® fastboot demo video
Supported Modules
nanoETXexpress-SP. Module must be ordered separately.
Technical Information
Power SmartBattery, 2 cells Li-Ion; Single power supply +12V
Hard Disk 2 x SATA
Ethernet 10/100/1000 LAN magnetic connector
Interface COM1 RS232 COM2 RS485 CAN
PCI Express Expansion PCI Express Card 34/54 slot
Flash Extension microSD Slot (depending on nETXe-module)
USB 2x USB 2.0 front connectors (USB 1,3) 2x USB internal on pin header (USB 0,2) 1x USB client port (USB port 7)
Display connectivity JILI, LVDS Panel connector CRT internal (depending on nETXe-module)
Sound HD Audio Codec ALC888 S/PDIF In/Out; Line In In/Out
Form Factor 120 x 70 mm
Supported Modules COM Express™ COM.0 Pin-out Type 1 modules in ultra size only, e.g. nanoETXexpress-SP. Module must be ordered separately.
Temperature 0 – 60 °C operating temp.
COM Express™ HMI Starterkit Type 1
COM Express™ HMI Baseboard Type 1
The COM Express™ HMI Starterkit Type 1 is equipped for express evaluation purposes. The fully equipped Starterkit is shipped incl. a COM Express™ HMI Baseboard Type 1, a 7“ WVGA Panel with touch, 12V power supply, cables and accessories and a USB stick with a demo image of Win CE 6.0, incl. a QNX® Neutrino® fastboot demo video.
The COM Express™ Human Machine Interface (HMI) Baseboard is suited for daily use and is designed to allow embedded application developers to get up and run quickly with the Ultra sized nanoETXexpress module platform.
Ordering Information
Article Part-No. Description
COMe HMI Starterkit Type 1 34100-0000-00-S COM Express™ HMI Starterkit Type 1, incl. nETXe-HMI Board 34100-0000-00-0, 7“ WVGA Panelwith touch, 12V power supply, cables and accessories, packed in plastic case
COMe HMI Baseboard Type 1 34100-0000-00-0 COM Express™ HMI Baseboard Type 1, COM Express™ Type 1
USB 3USB 2SATA 1 SATA 0 CRT Fan
CAN
GigabitEthernet
USB 7 (Client)
COM2RS485
USB 1USB 0
COM1RS232
HD AudioIn/Out
PWR/ResetConnector
SMARTBattery
Power
120 mm
70 m
m
6 www.kontron.com
Europe, Middle East & AfricaOskar-von-Miller-Str. 1 85386 Eching/Munich Germany
Tel.: +49 (0)8165/ 77 777 Fax: +49 (0)8165/ 77 279
CORPORATE OFFICES
North America14118 Stowe Drive Poway, CA 92064-7147 USA
Tel.: +1 888 294 4558 Fax: +1 858 677 0898
Asia Pacific17 Building,Block #1,ABP. 188 Southern West 4th Ring Road Beijing 100070, P.R.China
Tel.: + 86 10 63751188 Fax: + 86 10 83682438
#Sta
rter
kits
and
Eva
luat
ion
Boar
ds#
1112
2010
BFR
All
data
is
for
info
rmat
ion
purp
oses
onl
y an
d no
t gu
aran
teed
for
leg
al p
urpo
ses.
Sub
ject
to
chan
ge w
itho
ut n
otic
e. I
nfor
mat
ion
in t
his
data
shee
t ha
s be
en c
aref
ully
che
cked
and
is
belie
ved
to b
e ac
cura
te;
how
ever
, no
res
pons
ibilt
y is
ass
umed
for
ina
ccur
anci
es.
All
bran
d or
pro
duct
nam
es a
re t
rade
mar
ks o
r re
gist
ered
tra
dem
arks
of
thei
r re
spec
tive
ow
ners
.
Wind River Starterkits
» Get your application development started immediately » Fully assembled Starterkits for COM Express™ Technology » Pre-assembled with COMs incl. Heatspreader and Memory » Equipment for Wind River LiveUSB Evaluation Environment
The COM Express™ Starterkits VxWorks are equipped for express evaluation purposes. The VxWorks Starterkits are fully assembled with a COM incl. memory and Heatspreader. The VxWorks LiveUSB consists of VxWorks 6.8 and Tilcon Graphics Evaluation 5.7 environment, packed on a self contained bootable Fedora 11 LiveUSB stick with the Wind River Workbench 3.2 Development Environment with a 30 day evaluation period.
Find more details on the seperate Datasheet "Starterkits with VxWorks".
HOW TO CUSTOMIZE YOUR KIT?
4. Send your request to our Sales Representative or to [email protected]. A customized offer will be sent to you.
1. Select either a Starterkit or an Evaluation Board:
2. Select a COM Express™ compatible module (plus corresponding Cooling Solution) of your choice:
3. Select memory modules:
COM Express™ Debug Card
For easy debugging of self-designed carrier boards, Kontron offers with the COM Express™ Debug Card a helpful tool to customers, Sales Partners and Design Partners. The COM Express™ Debug Card can either be plug into a free PCI slot or nested between the module or the carrier board. It reads out the POST code which is sent over PCI or LPC bus and displays it. Thus, developers easily can find out where customized configuration gets stuck. The COM Express™ Debug Card can be ordered separatley using the article no. 11112-0000-00-0.
COM Express™ Starterkits and Evaluation Boards
Preassembled Starterkits including Computer-on-Module and Wind River LiveUSB Evaluation
