COMPETENCY STATUS

STANDARD FORM

NAME OF FORM: COMPETENCY STATUS FORM: APPLICATION FOR LEARNER CERTIFICATIONQUALIFICATION TITLE: NATIONAL CERTIFICATE: CHEMICAL MANUFACTURINGNQF LEVEL 2QUALIFICATION ID: 58955LEARNING PROGRAMME ID: n/aNUMBER OF CREDITS: 120 ( Minimum)

Notes : None of the unit standards in this form may be deleted. Ensure that the prescribed documents are attached. This form may also be used for achievement against skills programmes. In that case only indicate and sign for unit standards achieved. Please ensure that this form is fully and accurately completed to avoid delays in the production of certificates or statements of results. Units standards shared (NCOP) in grey are to be signed off by assessor who are registered with TETA.

Title of Learner Mr. Mrs. Miss. Dr. Prof. Other, Specify

Last Name

Full Name (s)

Unit Standard number

Unit Standard Name Registered Assessor or Team Name(s)

Assessor / SME Signature(s)

Assessor / SME Registration No(s).

Learner Signature Date of Assessment

CORE UNIT STANDARDS:Candidates are required to achieve all the following unit standards (51 Credits):

115188( 4 credits)

Apply environmental protection procedures

120402( 5 credits)

Demonstrate an understanding of introductory principles of chemistry and physics

246474( 10 credits)

Demonstrate understanding of process plant technology

246479( 5 credits)

Monitor and control product parameters in a manufacturing environment

244082( 10 credits)

Monitor plant and equipment in a process environment

244073( 5 credits)

Receive, handle and store hazardous chemicals safely

244079( 3 credits)

Respond to emergencies in a process environment

244083( 5 credits)

Solve operating problems using relevant technologies

110007( 4 credits)

Weigh raw materials for product manufacture in a chemical manufacturing environment

FUNDAMENTAL UNITS STANDARDS:Candidates are required to achieve all the following unit standards ( 36 Credits):

119463( 5 credits)

Access and use information from texts

9009( 3 credits)

Apply basic knowledge of statistics and probability to influence the use of data and procedures in order to

investigate life related problems

7480( 3 credits)

Demonstrate understanding of rational and irrational numbers and number systems

9008( 3 credits)

Identify, describe, compare, classify, explore shape and motion in 2-and 3-dimensional shapes in different

contexts

119454( 5 credits)

Maintain and adapt oral/signed communication

119460( 5 credits)

Use language and communication in occupational learning programmes

7469( 2 credits)

Use mathematics to investigate and monitor the financial aspects of personal and community life

9007( 5 credits)

Work with a range of patterns and functions and solve problems

119456( 5 credits)

Write/present for a defined context

ELECTIVE UNIT STANDARDS:Learners must do Unit Standards from the list below to give a minimum of 33 credits:

NB Learner must choose any two of the five compulsory unit standards

120410( 4 credits)

Clean and sanitise food manufacturing equipment and surfaces manually

113924( 2 credits)

Apply basic business ethics in a work environment

244076( 6 credits)

Apply elementary statistical process control principles

244071( 5 credits)

Apply sampling theory and practice

244080( 10 credits)

(COMPULSORY)

Apply standard operating procedures in a process environment

114974( 2 credits)

Apply the basic skills of customer service

114981( 2 credits)

Capture numerical and text information on an electronic database

120405( 5 credits)

Clean and sanitise a fast moving consumer goods (FMCG) processing system using an automated

cleaning-in-place (CIP) system

110300( 9 credits)

Clean inspect and lubricate a production machine, and repair minor faults

120238( 6 credits)

Collate and shrink-wrap packaged products using automated wrapping equipment

246482( 6 credits)

Control the activities of a small chemical manufacturing business

114639( 4 credits)

Control waste or effluent water in a manufacturing environment

14804( 6 credits)

Demonstrate knowledge of Good Manufacturing Practices in a Chemical Manufacturing environment

244078( 3 credits)

Demonstrate understanding of a work permit system

119666( 8 credits)

Determine financial requirements of a new venture

119673( 7 credits)

Identify and demonstrate entrepreneurial ideas and opportunities

9599( 3 credits)

Lift and move material and equipment by means of a forklift

246478( 6 credits)

(COMPULSORY)

Maintain the integrity of a sensitive manufacturing environment

244075( 5 credits)

Maintain the quality of products in a production environment

119668( 8 credits)

Manage business operations

119674( 10 credits)

Manage finances for a new venture

119672( 7 credits)

Manage marketing and selling processes of a new venture

116235( 5 credits)

Operate a pendant controlled overhead crane

242981( 4 credits)

Operate defined purpose lift trucks

110012( 10 credits)

Operate Equipment

12207( 4 credits)

Operate moving equipment to stack, de-stack and position materials

246477( 6 credits)

Package manufactured products using an automated or semi-automated packaging machine

114936( 2 credits)

Participate effectively in a team or group

119670( 8 credits)

Produce a business plan for a new venture

246476( 10 credits)

(COMPULSORY)

Produce formulated industrial and consumer products

119744( 8 credits)

Select, use and care for engineering hand tools

110299( 4 credits)

(COMPULSORY)

Transfer bulk solids

113877( 8 credits)

Understand fundamentals of electricity

244081( 5 credits)

Understand the properties and applications of materials in a processing environment.

116937( 4 credits)

Use a Graphical User Interface (GUI)-based spreadsheet application to create and edit

spreadsheets

117924( 5 credits)

Use a Graphical User Interface (GUI)-based word processor to format documents

9322 ( 3 credits)

Work in a team

119558 ( 10 credits)

Work with, use and care for materials and resources which can impact on health and the environment

244095 ( 6 credits)

Dismantle, assemble and install basic components in a process environment

116714 ( 4 credits)

Lead a team, plan, allocate and assess their work

120239 ( 6 credits)

Monitor critical control points (CCPs) as an integral part of a hazard analysis critical control point (HACCP)

system

244094 ( 5 credits)

Perform and support maintenance functions

14774(20 credits)

(COMPULSORY)

Prepare batches of material using an integrated batch mixing plant

Declaration of assessments and moderations:

As the registered constituent assessor and moderator involved in the assessments of the learner indicated in this form, we declare that a summary of assessment contained in this Competency Status Form is true and accurate as per the Assessment Summary Record attached. The complete records of the assessments of this learner are available for QALA Evaluation by the CHIETA ETQA on request.

MODERATOR NAME SIGNATURE REGISTRATION NUMBER DATE

NAME OF SUBJECT MATTER EXPERT (SME)(APPLICABLE TO THE REGITERED TEAM) * SIGNATURE DATE