Welcome to Red Globe Press

This document provides an introduction to who’s who at Red Globe Press and the process of both submitting a manuscript for production and the production process itself. We’d advise you to read through the whole document as soon as possible after signing your contract and use it as a reference guide throughout the process.

Who’s who

Your main point of contact at Red Globe Press is likely to be your commissioning editor, but you may well come into contact with other members of staff at various stages in the production and publication cycle.

EditorialDuring the writing stage you should stay in touch with your commissioning editor or their assistant. It is particularly important that you let them know if your plans for the book change or if you foresee problems in fulfilling any of the terms of your contract, such as the word limit or delivery date. They will be happy to discuss any issues or developments which arise as you work on the manuscript.

Depending on the terms that you have agreed with your commissioning editor, in some cases you may be asked to submit draft material in batches and / or a complete draft manuscript for review by your editor and their external advisors. Where this is the case, a pre-agreed amount of time will be factored into the writing schedule in order to allow for the time it will take to turn around reviews as well as the time it will take you to made final revisions once you’ve received feedback.

Having checked, approved and accepted your final manuscript, your commissioning editor and their assistant will pass it to the production department and brief the marketing department about the book. They will also brief the rights manager, who is responsible for investigating possible foreign language deals, and inform you of any such deals we secure.

Thereafter, your commissioning editor and their assistant remain your main contacts for all matters other than copy-editing, proofreading and schedules, throughout the production process. They will liaise with you over the cover design as appropriate.

ProductionThe production department is responsible for organizing the copy-editing, typesetting, proofreading, ebook creation and printing of your book. An in-house production editor will oversee these activities whilst managing the production schedule. The production department works closely with your editorial contacts and marketing department.

1

Marketing and SalesFor information about sales, marketing and rights please visit our ‘after publication’ page on our website, or contact your editor. RoyaltiesOnce you have signed your contract, your contact addresses and the royalty rate that you have agreed with your commissioning editor will be sent to our royalties department. Once your book has published, unless you have agreed otherwise you will receive a royalty statement once a year in April. If any problems or queries on your royalty account arise, please email royalties@macmillan.co.uk.

PART 1: submitting your final manuscript

We hope you enjoy the production process and we aim to provide a professional and efficient service whilst producing your book to the highest practicable standards. In order to help us do this, we ask that you submit your manuscript in an appropriate form. The guidelines below offer advice on the most common queries from authors: text style; referencing style; manuscript layout; permissions queries; supplying artwork; and cover design.

text styleWe do not impose a rigid house style but we would like our books to conform to the basic conventions outlined here. If you are in any doubt about style, please do contact your commissioning editor but remember that consistency and clarity are important above all.

- Spelling, should be consistently either English or American. Please check which your commissioning editor would prefer. Use -ize or -ise spellings consistently for words such as globalization/organization. Generally we prefer -ize, especially if the title of the book contains such a word.

- Spelling foreign words. In works dealing with foreign countries or foreign languages, especially those with alphabets different from English, please decide on the spelling or transliteration style of names and words at the outset and remember to use consistently. If you’re using any special characters/diacritics please also provide a PDF of your manuscript on submission.

- Dates should be styled 18 May 2016, and decades as the nineties or the 1990s without an apostrophe.

- Abbreviations consisting of capital initial letters don’t have full stops – GNP, USA. Contractions ending with the same letter as the original word do not take terminal full stops – St, Mr, Dr – but abbreviations where the last letter of the word is not included do take a full stop – ed., ch. – thus ed. and eds are both correct. Abbreviated units of measurement do not take a full stop – lb, mm and kg – and do not take a final ‘s’ in the plural – 7 lb, 10 mm.Common abbreviations such as etc., i.e., and e.g. are fine to use throughout but should be styled consistently.

- Ellipses should consist of three spaced dots with a space on either side. Also, when the last part of a quoted sentence is omitted and what remains

2

is still a grammatically complete sentence, a period followed by three spaced ellipsis dots may be used (using only three ellipsis dots is also acceptable, but your style should be consistent).

- If following UK style use single quotation marks for quotes and double quotation marks for quotes within quotes; final punctuation should be within quotation marks if a complete sentence is quoted. Final punctuation will be outside quotation marks if the quotation forms only part of a sentence in your running text.If using US style then single quote marks should be used inside double and end punctuation should fall within quotation marks in the case of commas and periods, and outside quotation marks in the case of colons and semicolons.

- Displayed extracts (direct quotations set off from the main text) do not require quotation marks. When you wish to interpolate your own words within a quotation, place them in square brackets. Generally these are set apart from the main text if they exceed 60 words in length, though this can vary according to text design. All quotations must be accompanied by a source.

- Direct quotations should appear as in the original and not be changed to conform to our house style. However, when doing your own translating, you should match book style. All quotations must be accompanied by a source.

- Initial capitals are used to distinguish the specific from the general – for example, ‘she is Professor of Economics at …’, but ‘he is a professor at a …’.

- Numbers one to ten are expressed in words, but 11 upward appear in figures, unless used in general terms – for instance, about a hundred people. Wherever a unit of measurement is used the number preceding it appears in figures – unless it is used in a very general sense such as hundreds of miles.

- Decimal points should appear as full stops on the line. Please mark clearly, either as a note within your electronic file or on a printout of the relevant page, the difference between the capital letter O and zero and between lower-case l and figure 1 where there may be doubt.

- Inclusive numbers should include the fewest possible digits: 32–3, 132–48, 200-5, except in ‘teen’ numbers, where the 1 is repeated, 1914–18. Dates should be elided to the last two digits: 1997–98.

- In text, per cent should usually be spelt out and the number should appear in figures – 54 per cent. In tables the % symbol can be used.

- Hyphenation. In general this is being used less frequently in compound terms – for instance, microeconomic. Clarity of meaning and consistency throughout the book are the most important considerations.

- Headings, sub-headings, table headings and figure captions should not have full stops.

- Parentheses (or round brackets) are used for simple interpolations, and square brackets for editorial notes or interpolations in quotations.

3

We do not insist on a particular referencing style, however, any style you do use should be consistent.

- Please number Parts of your book I, II, III and refer to them in the text as Part I, Part II, Part III. Chapters or Units should be numbered 1, 2, 3 and referred to in the text as Chapter 1, Chapter 2, Chapter 3.

- Cross-references to other pages within the book can cause problems at proof stage. If possible please refer to chapters or sections of text rather than to pages.

- Try to use gender-neutral language where possible: ‘his or her’ or ‘their’ rather than just ‘his’.

- Close up spaces between paragraphs unless the spaces are clearly purposeful; in which case, mark them as a special design element, for example, with three asterisks.

- Number Tables and Figures according to chapter and figure/table number (e.g., Table 1.1 for Table 1 in Chapter 1, Figure 2.3 for Figure 3 in Chapter 2, and so on). In the text, please direct readers to ‘see Table 1.1’ (or Figure 2.3) rather than giving page numbers or using general terms such as ‘above’ or ‘below.’ In some cases you may be using illustrative artwork that you don’t want to include in the general figure numbering (e.g. photographs which appear in the margin or those which have been used to add colour and interest). If so, please name the callouts consistently. Or if you wish to identify artwork that appears in boxes separately to the figures throughout the text please label them logically, for example, B1.1. If in doubt, discuss with your commissioning editor. More details about supplying artwork can be found below.

We recommend creating a list of your stylistic decisions that you can submit with your manuscript. This list can then be followed by the copy-editor and proofreader later in the production process and enable them to ensure consistency. For books with two or more authors, or edited collections, a style list can help ensure that all authors and contributors are writing in the same style.

notes, references and bibliographyReferencing styles vary significantly from one discipline to another. Whilst we prefer to use the Harvard style of referencing (more details below) we do not insist on a particular style (unless your book is in a series which has an established style). However, any style you do use should be consistent. Your copy-editor will ensure your references are consistent and they will query anything they are unsure of, but you will save a lot of time and many queries if you ensure your notes and references are presented in good order when you submit your final manuscript.

Harvard referencing provides the abbreviated details of the source(s) quoted or referred to in parenthesis directly in the text e.g. (Jones, 2014, p.10), with a corresponding full entry in the Bibliography.

Notes and Bibliographies normally appear at the end of the book (in this order, if we have both) but sometimes in multi-author works may appear at the end of individual chapters. We prefer not to have on-page footnotes. Please ensure that any notes and/or references are double-spaced and in the same size type as the rest of the typescript. Please check that there are no omissions or repetitions and

4

EXAMPLE

S. Blinder and R. M. Solow (1999) ‘Analytical Foundations of Fiscal Policy’, Journal of Finance, XXV, 47–54.Please note that the abbreviations ‘p.’ and ‘pp.’ may be omitted for articles in journals.

EXAMPLE

H. B. Garland (1999) A Concise Survey of German Literature, 2nd edn (Basingstoke and New York: Palgrave Macmillan), p. 84.

Freund, B. (1999) ‘The Making of Contemporary Africa’ in B. Smith (ed.) A History of Africa (Basingstoke and New York:

EXAMPLE

If referring to the home page of the European Commission you might abbreviate this to ‘Europa’ using a, b, c, etc. to distinguish references to different pages hosted on the Europa site. If the document you are referring to has a date this should be used in the reference in the text. If not, as in this case, you should use the date accessed instead. So if you accessed it on 14 February 2016 this reference might be (Europa, 2016a) and the corresponding entry in the bibliography:Europa (2016a) Secretariat-General of the European Commission, http://ec.europa.eu (home page), date accessed 14 February 2016.

Or if you want to reference the individual page:Europa (2016a) Secretariat-General of the European Commission, http://ec.europa.eu/dgs/secretariat_general/i

that the number of notes in each chapter corresponds with the number of notes in the notes section.

Similarly please be sure that each reference in the text has an entry in the Bibliography.

For repeated entries we prefer you not to use ibid. and op.cit. but instead to use author name and an abbreviated title. Repeated entries must be in full at first mention in each chapter’s references.

When citing articles in journals you should list:- the author’s initials and name- the date, ideally in parentheses- the title of the article in quotes- the name or accepted abbreviation of the

journal in italic- the volume number- the issue number if the volume is not paginated

continuously- the page number(s).

When citing books you should list: - the author’s initials and name- the date, ideally in parentheses- the title of the book in italic- the volume number or edition where relevant- the place of publication and/or name of the

publisher, ideally in parentheses- in notes but not bibliographies, the page

number(s), if appropriate.

WebsitesWhen referencing websites try to use as simple a method as possible, avoiding the inclusion of lengthy addresses for individual web pages especially when these are likely to have changed by the time anyone looks for them. Accordingly our general advice is to try to apply the same principles to web references as to references to books or journals.

If using Harvard references it is best to think of a concise ‘author’ to use in the text reference and spell out the full ‘author’ in the bibliography.

Other media

5

If citing from other media, we suggest you help your reader by identifying the medium, e.g. ‘blog’, ‘podcast’, ‘interview’, ‘questionnaire’, in the reference details, and include any information you think will be useful to the reader.

text layoutPlease do not be overly concerned with the layout of your Word manuscript. The final text design will be decided by your commissioning editor and their assistant and will take into account the various features of your book. We ask that you consider, and ensure that the manuscript displays each of the following clearly:

- where paragraphs begin and end- if any words should be italicised or bold (e.g. foreign names, or glossary

terms)- what material should be presented as boxed, and what type of box (e.g.

case study? glossary definition?)- all notes are entered as embedded endnotes, not as footnotes- which quotes are to be set off from the text (extracted) and which are not,

and- clear and consistent differentiation between chapter titles and different

levels of headings and subheads (note, that it is best to avoid using all capitals to indicate headings as the caps often need removing to fit the final text design style).

Overall, it is important to be consistent with your layout as it will make it easier for both copy-editor and typesetter.

Once your manuscript is copy-edited a professional typesetter will set the book according to the specified design. Excess formatting created in word-processing programs is usually lost in conversion to typesetting programs so it is advisable not to spend time on the layout unneccesarily.

Please use commonly available fonts such as Arial or Times New Roman.

edited collectionsEditors should include a ‘Notes on Contributors’ section in which each contributor is described in one to five sentences. Contributors can be listed here alphabetically. The descriptions should include each contributor’s affiliation and/or profession. Each contributor must approve and agree to this description.

We must also receive a signed contributor’s agreement for each chapter – please see the form that will arrive under separate cover from your Editorial Assistant.

prelimsWhen printed, preliminary pages, or ‘prelims,’ are numbered in roman numerals. Red Globe Press will create the first four pages: half title, series page (or blank if series not applicable), title page and imprint/copyright page, but all other preliminary material must be provided by you on submission of your manuscript.

Prelims can vary hugely in length but generally include contents page(s); lists of figures and tables; lists of abbreviations and/or acronyms; a preface; and acknowledgements. You may also wish to include information on how to use the book or details of companion website material.

6

Artwork includes any illustrative material that you wish to include in your book. Photographs, diagrams, charts, sketches, maps etc.

Generally, tables are always counted separately as they are treated differently throughout the production

You must provide a callout in the text, a caption and appropriate source line to accompany all artwork.

Please note an introduction should be the first chapter in the book and not part of the prelims.

endmatterEndmatter can include, in roughly this order, Appendices, Notes/References, a Bibliography, a Glossary and an Index. Their titles should be included in the Contents.

artworkArtwork includes any illustrative material that you wish to include in your book; this can vary from photographs and cartoons to diagrams, charts, sketches, maps etc. Generally, we count tables separately to other illustrative material because they are treated more like text throughout the production process. Please discuss any ideas for artwork with your commissioning editor at the earliest stage possible. The guidelines below should help you help you submit all artwork to the print standard desired, but if at any stage you have any queries ahead of final manuscript submission, do check with your Editorial team.

Remember, if you are using artwork from another source, you must obtain permission and there are detailed guidelines on seeking permissions on https://www.macmillanihe.com/. Please ensure you provide the relevant paperwork and permissions tracker to the Editorial Assistant when you submit your final manuscript.

Unless otherwise agreed, all artwork will be produced in black and white so it is important to think about how the artwork will appear on the typeset page when selecting an image. For example, if you have a bar chart with 5 different coloured data points on it, ask yourself if you’ll be able to distinguish between the colours when it is converted to black and white? Similarly, think about the location of figures: it is generally advised that figures should not be placed too closely together; roughly 400 words between each figure ensures that artwork is spaced evenly throughout the book, but with highly illustrated titles this may be difficult

to achieve (if concerned, please discuss with your commissioning editor).

You must provide a callout in the text (e.g. [Figure 6.1 inserted about here]), a caption and appropriate source line to accompany all artwork. As mentioned above

please do not refer to figures in the text by location (e.g. please see below) but instead refer to them by title (e.g. please see Figure 6.1).

There are two main types of artwork: - Line art is defined as having no gradations of tone or shadings and

include maps, diagrams, sketches, graphs, or charts, and are drawn with lines, dots, crosshatching, or solid black shapes.

- Halftones are defined as having gradations of tone or shadings, and include photographs, transparencies, painted artworks, drawings or sketches.

How to check the quality of artwork

7

To produce a print quality image, the minimum resolution should be 300 dpi at the size the image will be printed.

EXAMPLE

In Windows Photo Viewer you can right click on an image and select ‘properties’ to see the pixel width and dpi of an image. This example is 96dpi and 512 pixels wide. This means it would be about 4.26cm wide on the printed page.

ϮϲĐŵϰ͘

For halftones, please supply the image file at the final desired printed size or larger: 300 dpi or above and roughly 1500 pixels wide. Ideal formats are .tif or .eps, but we can also accept compressed formats such as .jpg, .gif and .bmp if quality of the printed image is not crucial.

The quality or resolution of an image is determined by the number of pixels (dots) per inch (dpi). The number of pixels an image contains is also closely linked to the size the image can be reproduced at. If we stretch a low quality image to fit the printed page, the image will become pixelated and detail will be lost. As an approximate guide an image that is approximately 1500 pixels wide and 300 dpi will fit a standard book size (at about 12.5cm on the printed page). A simple equation allows you to see the size of your images, by dividing the width by the dpi, then converting from inches to cm: (1500 ÷ 300) x 2.5 = 12.5cm).

Supplying the ArtworkBoth line art and halftone images need to be of the highest possible quality. Photocopies and web downloads are almost never of sufficient print quality and are often accompanied by permissions issues. If you have any questions about the quality of the figures you wish to include, please submit a sample to your commissioning editor who will then consult with the production department.

When submitting the final manuscript files, please only provide the artwork you wish to include in the book and do not provide alternatives.

If you have any hard copy figures such as print photographs, architect’s plans or transparencies, please submit these with details of a return address. The production department will scan these to the necessary print quality.

All photographs or halftones should be submitted as separate files, in .tiff or .jpg file format. They should be at the final desired printed size or larger and at 300

8

dpi or above. Do not submit halftones ‘dropped’ into a Word file as this will reduce the quality of the image significantly. Similarly, do not convert your colour halftones to black and white yourself as much of the original richness of the image may be lost.

Line art should be submitted in the program it was created in. For example, if you have drawn a figure in Word, then it is acceptable to submit this is Word, or if you have created a graph in Excel, it is acceptable to submit the .xls file. If you have detailed graphs that have been created in Microsoft Excel then it is best to always submit the data files that have been used to create the image.

The Illustration Checklist (available at https://www.macmillanihe.com/) can be a helpful tool to track your artwork, permissions status, and provide instruction for redrawing/relabeling. We would recommend completing the checklist if you have 20 or more figures in your book and ask you to submit it along with your final manuscript.

TablesTables are most frequently created in Word and are treated slightly differently to all other artwork. When creating a table in your manuscript please use the ‘insert table’ function in Word rather than a series of ‘tabs’ or ‘spaces’ to put text into columns. Using the proper table facilities in Word will mean data in the columns is at less risk of moving when it comes to typesetting.

Please let us know if any tables in your manuscript require special treatment; if they are very wide or very long, or if it is important they are to be set opposite a particular figure for example.

cover designThe design of your cover will be coordinated by your commissioning editor and their assistant and a designer, along with your production editor and our marketing and sales department. You will be asked for design input by your editorial assistant. If you have an image you would like us to consider incorporating please have it approved by the commissioning editor in advance of the final manuscript delivery date. Do not purchase art for the cover without your commissioning editor’s approval; we may be unable to use it for permissions, marketing, branding, or other reasons.

organizing and labelling the electronic filesGenerally, it is preferable to deliver each text item as a separate file, for example: preliminary matter (title page, copyright page, dedication, table of contents, preface/acknowledgments, or foreword should all be in placed in one file), introduction, individual chapters, and bibliography/references. Every file must be saved in the same program.

Artwork should also be delivered as separate files where possible.

Label each individual text or artwork item with a clear, descriptive name. For example:

- Chapter 1 = chap1.doc - Introduction = intro.doc - Second table of Chapter 4 = table4_2.doc- Figure 2.3 = fig2_3.jpeg

9

Remember to check all of your files very carefully before you submit your manuscript. Special characters and italicisation in particular can be susceptible to automatic alterations imposed by word processing programmes.

LaTeXIf you wish to submit your manuscript in LaTeX, please discuss with your commissioning editor as soon as possible. We will request a sample chapter several months before final submission which we will send to the production department for testing. This enables us to identify any potential issues with the files and allows us enough time to correct any problems before production begins.

All LaTeX files should be delivered with an accompanying PDF produced from the final files. There should be no differences between the TeX files and the PDF.

submissions formPlease complete the submissions form found on https://www.macmillanihe.com/ (or provided by your editorial assistant). This form requests some information that enables us to process your manuscript efficiently. To ensure you have included everything you wish to submit, please find a final manuscript submission checklist below:

When you deliver your final manuscript to Red Globe Press, we expect that the manuscript is ready for production and all suggested revisions from the

10

FINAL MANUSCRIPT SUBMISSION CHECKLISTPlease ensure you provide the following when you submit your final manuscript to your editor.

TEXT☐ One complete, double-spaced, consecutively numbered manuscript divided

by chapter (and no extra or alternate files). CHECK: ☐ Have you spell-checked all documents?☐ Do chapter titles in the text match the table of contents? ☐ Are there location callouts in the text for all figures and tables? ☐ Do you have special characters or symbols in your text? If so, can you

also supply a PDF version of your final manuscript?ARTWORK

☐ All artwork saved in separate files, preferably .jpeg or .tiff (unless image has been created in Word or any other Microsoft package). CHECK:

☐ Do you have permission to use all the artwork and tables you wish to include?

☐ Is all the artwork of sufficient quality? ☐ If you have complex graphs or tables, have you provided the

accompanying data files?☐ Do you need to provide further instructions to accompany the artwork?

If so, have you provided an Illustration Checklist? PERMISSIONS

☐ All permissions paperwork including release forms (for interviews, people, buildings). CHECK:

☐ Have you provided a permissions tracker?

FORMS☐ Your completed Manuscript Submissions Form. ☐ Signed contributor agreement forms, if available.

commissioning editor, series editor (if applicable), and peer reviewer(s) will have been fully incorporated.

Next, your editorial assistant will ensure that you have provided everything we need in order to progress to production, including relevant permissions and permissions tracker (see https://www.macmillanihe.com/); all artwork and illustration checklist (if using); and the author marketing form. Once satisfied that the manuscript is ready, the editorial assistant will complete the handover process

PART 2: the production process

The following is an overview of the stages that your book will complete during the production process.

Once your manuscript has been transferred to production, you will be contacted by a production editor, who will send you the proposed schedule that will outline the dates for the rest of the production process.

key stages of production overview The Red Globe Press production department provide all the services necessary to take your book from manuscript to bound copies and ebooks. They are responsible for:

- scheduling- copy-editing- design- typesetting- proofreading- printing and binding- ebook creation - delivery of books to warehouses

The functions listed above are controlled by production editors whose responsibility it is to see books safely through the production process. Production editors work closely with commissioning editors and their assistants.

The production editor will assess the manuscript and assign it to one of our experienced and highly skilled freelancers or project managers. All of the production work will be coordinated carefully from in house by the production editor, but much of the actual work to produce the book will be done by one or several of these suppliers.

We encourage our suppliers to build good working relationships with our authors, and to do all they can to make the production process smooth, efficient and enjoyable. If you have questions or concerns at any point during the process, we encourage you to correspond with your production editor and/or supplier.

The flowchart below gives a brief outline of the production process. Typically we take six to seven months to move from receipt of your book into production to publication, though some books are produced more quickly and some more slowly.

11

production workflow

12

Some of our books are printed in China and can take up to 6-8 weeks to be delivered into our warehouse and before publication.

The copy-edit usually results in a few queries to be addressed and resolved by you before typesetting begins.

Proofs will be read by a professional proofreader and checked by your production editor and editorial contacts, and some queries may arise from this. However ultimate responsibility for checking proofs resides with you. This is also the stage at which the

Publication

Advanced copies received/shipping

Printing

Final files produced

Typesetting

Typesetting

Final manuscript submission

2 weeks

3-4 weeks

3-4 weeks

2 weeks

3-4 weeks

Indexer

AuthorProofreader

Revised proofs

Editorial team

1st proofs issued

Typesetting

Copy-editing

Production assessment and supplier allocation

Editorial assessment and handover to production

department

The copy-editor’s responsibility is to read your manuscript carefully and to correct and edit in order to ensure accuracy in spelling, grammar, punctuation, word usage and style, and general consistency

copy-editing and copy-editing queriesThe copy-editor’s responsibility is to read your manuscript carefully and to correct and edit in order to ensure accuracy in spelling, grammar, punctuation, word usage and style, and general consistency throughout. In addition to the above, the copy-editor will ‘mark up’ or ‘tag’ the manuscript for the benefit of the typesetter; this means that the copy-editor is clearly identifying the individual features of your book that need to be set in different styles. The ‘tags’ will not interfere with your work and will not be visible in the proofs or final book. Where possible, we use copy-editors that have an understanding of the relevant subject area, however, it is not the copy-editor’s responsibility to fact check your work.

If you wish to see a sample copy-edited chapter before the copy-editor continues to edit the complete manuscript then please let us know when you complete the submissions form. The submissions form also gives you the opportunity to select how you’d like to receive queries from the copy-editor (as an email list or a Word tracked changes file, for example).

Most queries resulting from the copy-edit tend to be regarding the books references and/or asking you to confirm a consistent style for frequently used words and phrases. The copy-editor will send you any queries that arise from the copy-editing and, if appropriate, you will be asked to check the edited typescript before we start typesetting. It is very important that you and the copy-editor finalize the typescript at this stage as changes to proofs are time-consuming and can result in the introduction of errors. We ask that you respond to the copy-editor as promptly as possible in order to keep to the production schedule. Note that we will consider your submitted manuscript as final and this is not an opportunity to make substantial changes, if, however, you do need to revise significant passages, please discuss with your production editor or commissioning editor first.

proofs and proofreadingAfter the copy-editing is completed, the edited manuscript will be sent to the typesetter who will create page proofs. You will be sent these proofs in electronic form, usually as a PDF file (if you require a print out, please discuss with your production editor/supplier). The proofs are sent to you so that you can:

- see how the final typeset pages will look- ensure that they are free from typesetting and factual errors- prepare your index (if applicable).

Your production contact will send you some specific instructions on how to use the PDF mark-up tools if required. We encourage you to use these proofing facilities as they enable you to correct and edit your proof with little ambiguity and can save the typesetter a considerable amount of time when taking in corrections.

If there are more than two authors, or you are working on an edited collection, all corrections must be collated and returned as one complete set to your production supplier. Please bear in mind that the more corrections you make the more costly the production process becomes and the more opportunity there is for errors to creep in. You should be making essential changes only and consider

13

The proofreader’s responsibility is to read the text closely and mark up any spelling or grammatical errors; they are also on the lookout for any inconsistencies and will be using style sheets provided

the effect of the changes you are requesting will have on the pagination. For example, removing a figure or table without replacing it with something of a similar size, will cause the resulting text to reflow which will also affect the index. We aim to provide you with as much time as possible to check the proofs, but it will be in the region of two to three weeks; please return the proofs as promptly as you can to avoid incurring delays in the production process.

Whilst you are checking the proofs, they will also be sent to a professional proofreader and be checked internally by the production editor and editorial assistant. The proofreader’s responsibility is to read the text closely and mark up any spelling or grammatical errors; they are also on the lookout for any inconsistencies and will be using style sheets provided by the copy-editor to check against. The proofreader will not contact authors directly but instead they will send a list of queries to your production supplier which will then be passed on to you if necessary. Do bear in mind that, although we use professional proofreaders, the ultimate responsibility for checking the proofs lies with you.

If you have agreed to provide an index for your book remember that this must be compiled within the time allowed for proof-reading so that you return the marked proofs and index copy simultaneously.

You will not be sent a revised set of proofs unless otherwise agreed or your production editor deems it necessary. All corrections will be checked very carefully by your production editor and they may see several more sets of proofs before final text files are requested.

indexing Your commissioning editor will have discussed the indexing options available to you before you submitted your manuscript. Generally, we encourage all authors to prepare the index themselves as no one knows your book as well as you do. If you are indexing yourself there are detailed guidelines on https://www.macmillanihe.com/. We would encourage you to think about the terms you want to include whilst you are finalising the manuscript. We ask you to prepare the final index when the proofs are available and the final page numbers can be added to entries, making a head start by already having a list of indexing terms can make this a much easier process.

When you submit your proof corrections you should also submit a Word document of your index. This will then be typeset at the same time that your corrections are incorporated into the proofs.

If a professional indexer is compiling your index for you (either commissioned by yourself or Red Globe Press) we also encourage you to provide us with a list of terms and preferences for your index. We commission experienced indexers with knowledge of the appropriate subject areas but all indexes can be subjective to the reader. If you have a clear idea of what should/shouldn’t be incorporated, please let us know ahead of time. Before we set a commissioned index we will send it to you for your approval.

publication – delivery to warehouse and advance copies

14

Once the typesetter receives the corrected proofs and index, he will make all the corrections and typeset the index. The typesetter’s work will be checked, and then he will create final files, and we will proceed with the printing of the book. Usually, you can expect to receive an advance copy of the finished book six to ten weeks after returning corrected page proofs.

Where books are printed outside the UK your commissioning editor will normally send a copy to you as soon as they receive advance copies from the printer via our production department. Your contractual complimentary copies and any copies we are contractually committed to send to contributors of chapters, etc. (your contract will specify the exact number) will be sent out as soon bulk stock is received in our warehouse.

ebooksOnce final print files have been delivered we will convert your book into ebook formats which will then be distributed to ebook vendors and released at approximately the same time as the release of the print copies. There are two main types of ebook format: ePDF and ePUB. ePDFs are compatible with most e-readers and have the same properties as a regular PDF, this means the layout is ‘fixed’. If you zoom in on the page using your e-reader, the content will remain identical to how it looks on the printed page. ePUBs are ebooks which conform to an industry accepted standard and they generally have a ‘reflowable’ layout; if you zoom in, the text reflows and all the features on the page adjust to fit. For some highly designed or highly illustrated books, it is not ideal to have a ‘reflowable’ ebook, as the altered content may mean that the text becomes confusing. The decision on which e-formats your book will be converted to will be made by the commissioning editor.

15

Glossary

artwork a term used to describe the illustrative matter in your book – from straightforward charts to freehand drawings and photos.

copy-editing detailed work on your book to ensure accuracy in spelling, grammar, punctuation, word usage and style, and consistency throughout.

cover blurb a brief description of your book and you, printed on the cover.

dpi dots per inch – the number of dots contained per inch in a text or illustration file – the larger the dpi the better the quality.

EPS (.eps) Encapsulated Postscript – a file format used to transfer PostScript image information from one program to another.

font a typeface.JPEG (.jpg) Joint Photographic Experts Group – easily compressed

graphics file format.PDF Portable Document Format – software allowing

reduction in file size to make documents more easily transportable. A secure method of ensuring file formatting is retained no matter what hardware is used to open the file.

PostScript a page description and programming language; electronically describes the typesetting.

printer a supplier appointed to print and bind your book; in other words, produces the final product.

project manager a contact person assigned to you by your production editor.

proof produced by the typesetter to show book pages in their final form. Your chance to check the accuracy and layout of the typesetting and to produce or finalise your index.

proofreaderschedule a sequence of events and deadlines agreed for

production of your book to get it to the marketplace at the optimum time.

TIFF (.tif) Tag Image File Format – a file format for the storage of bit-map graphics and scanned images. Useful for images where quality is important.

manuscript your book, as delivered by you to the commissioning editor.

typesetter a supplier who will take your electronic file including the copy-editing, apply specified type styles and design, and produce a proof of the typeset pages.

UNICODE an international standard that assigns a unique identifier to a huge number of characters across international languages, ancient and modern, ensuring compatibility of fonts across different typesetting systems.

16