0 Curriculum for Certificate in Dress Making (Certificate Level – 1 ...

0 | P a g e

Pag

e0

Curriculum for

Certificate in Dress Making

(Certificate Level – 1 Year)

Code:VF51S013

(2013)

0 | P a g e

Pag

e0

CONTENTS

Index Page Index Page

Introduction 01 Assessment Dress Making Curriculum 58

Overall objective of the course 01 Module 1: Learn Basic Knowledge of Fabric/Garment 58

Competencies gained after completion of the course 02 Module 2: Learn measuring tools and measuring concept 61

Job Opportunities available immediately and in future 03 Module 3: Initiate Work 63

Trainee entry level 03 Module 4: Take body/ sample garment measurements 66

Minimum qualification of trainer 03 Module 5: Develop Pattern 71

Medium of instruction 04 Module 6: Cut Fabric 76

Timeframe assessment 04 Module 7: Ensure material quality 78

Over view about the Programme- Curriculum for Dress Making 05 Module 8: Stitch Garment 80

Dress Making Curriculum Contents 12 Module 9: Perform Finishing 85

Module 1: Learn Basic Knowledge of Fabric/Garment 12 Module10: Pack & Deliver Product 87

Module 2: Learn measuring tools and measuring concepts 15 Module 11: Maintain Stitching Machine 89

Module 3: Initiate Work 17 Module 12: Work in a team 91

Module 4: Take body/ sample garment measurements 20 Module13: Manage time 93

Module 5: Develop Pattern 25 Module 14: Apply health & safety rules 95

Module 6: Cut Fabric 30 Module 15: Upgrade Skills 98

Module 7: Ensure Material Quality 32 List of Machinery / Equipment/ Tools 100

Module 8: Stitch Garment 35 List of Consumable Materials 105

Module 9: Perform Finishing 41 Reference Material 107

Module10: Pack & Deliver Product 43 Contributions in development of this Curriculum 108

Module 11: Maintain Stitching Machine 45

Module 12: Work in a Team 47

Module13: Manage Time 49

Module 14: Apply Health & Safety rules 51

Module 15: Upgrade Skills 55

1 | P a g e

Pag

e1

Introduction

This course gives trainees to develop skills to initiate work, develop pattern, stitch garments, pack products & deliver to customers

well in time keeping health and safety measures. Students will improve the level of skills to work not only independently but will be

able to develop cottage industry or work in industry and increase the socio-economic potential of the country.

Industry will get creative workers whose scope with job knowledge and skills are identified. Assist in human resources development

by providing precise and assessed country’s skilled manpower quantitatively as well as able to develop own business.

Overall objective of the Course

The objectives of this course are to:

Acquire the skill and knowledge of Dress Maker alongwith minor maintenance of machine.

Qualitative production of the garments.

Produce skilled manpower for dress making cottage/Industry in the field of dress making.

Improve the level of skill of workers in cottage/ industry and increase the economic potential of the country.

Provide industry with workers whose scope with job knowledge and skills are identified.

Assist in human resources development by providing precise and assessed country’s skilled manpower quantitatively as well

as qualitatively.

Provide technical and vocational training which reflects the requirements of cottage/industry.

2 | P a g e

Pag

e2

Competencies gained after completion of the course

At the end of the course, the trainee must be able to attain the following competencies.

Learn Basic Knowledge of Fabric/Garment

Learn measuring tools and measuring concept

Initiate Work

Take body/ sample garment measurements

Develop Pattern

Cut fabric

Ensure material quality

Stitch garment

Perform Finishing

Pack & deliver product

Maintain Stitching Machine

Work in a team

Manage time

Apply health & safety

Upgrade Skills

3 | P a g e

Pag

e3

Job opportunities available immediately and in the future

After completion of the training, candidates can find the employment opportunities in the following disciplines.

Cottage Industry

Self-employment

Garment Factories

Occupation of dress maker/ Jobs at tailoring shops

Trainee entry level

Nil

Minimum qualification of Trainer

B.F.A (Textile Design)

OR

F.A with two years diploma in relevant field and two years work experience.

4 | P a g e

Pag

e4

Medium of Instruction

Urdu

Timeframe of assessment

Duration of Course 1 Year

Total Hours 1600 hrs

Training Hours 1480 hrs

Assessment 120 hrs

Per Week Hours 30 hrs

Per Day Hours 05 hrs (6 days a week)

5 | P a g e

Pag

e5

Overview about the program – Curriculum for Dress Making

Module Title & Aim

Learning units Theory (hours)

Workplace (hours)

Total Hours

Module 1:

Learn Basic Knowledge of Fabric/Garment Aim: This module

develops competency to gain knowledge of different types of fabrics, threads & embellishments

LU-1 Analyse types of Garments

LU-2 Check Parts or panels of Garments

LU-3 Analyse different types of Fabrics

LU-4 Analyse Shrinkage methods of fabric

LU-5 Learn Types/ quality of threads

LU-6 Learn Types of Embellishments

LU-7 Apply embellishments on garment

20 80 100

Module 2: Learn Measuring Tools and Measuring Concept Aim: This module

develops competency to use different types of measurement tools along with application

LU-1 Learn use of Measuring tape

LU-2 Learn use of Measuring Scale

LU-3 Learn use of French curves

LU-4 Learn use of L- shape scale

LU-5 Learn measuring points

LU-6 Prepare writing sheet of measurement

12 48 60

Module 3:

Initiate Work Aim: This module

LU-1 Take requirements from customer

LU-2 Prepare estimate of product cost

LU-3 Take approval of rates from customer

20 80 100

6 | P a g e

Pag

e6

develops competency to take requirements from customer to initiate work

LU-4 Arrange Material / fabric

LU-5 Prepare work place

LU-6 Arrange tools/equipment

Module 4: Take body/ Sample Garment Measurements Aim: This module

develops competency to take proper measurements

LU-1 Measure length

LU-2 Measure width

LU-3 Measure Shoulder

LU-4 Measure sleeves

LU-5 Measure armhole

LU-6 Measure chest

LU-7 Measure waist

LU-8 Measure hips

LU-9 Measure slit

LU-10 Measure neck

LU-11 Measure front neck drop

LU- 12 Measure back neck drop

LU- 13 Measure Crotch

LU- 14 Measure Bottom

30

120

150

Module 5:

Develop Patterns Aim: This module

develops competency to

develop Pattern f or

LU-1 Select tools/equipment

LU-2 Spread Drafting sheets on cutting table

LU-3 Assign labels

LU-4 Mark measurements of Qameez

50

200

250

7 | P a g e

Pag

e7

cutting LU-5 Mark measurements of Shalwar

LU-6 Mark measurements of Pheron

LU-7 Mark measurements of Frock

LU-8 Mark measurements of Dress Shirt

LU-9 Mark measurements of Trouser

LU-10 Mark measurements of Shorts (Niker)

LU-11 Draw pattern on markings

LU- 12 Perform pattern cuttings

Module 6: Cut Fabric Aim: This module


cut fabric


LU-2 Spread fabric on cutting table

LU-3 Perform pressing

LU-4 Place Pattern on fabric

LU-5 Perform markings on fabric

LU-6 Perform cuttings

30

120

150

Module 7:

Ensure Material Quality Aim: This module

develops competency to ensure material quality

LU-1 Check fabric quality soft/semi-soft/hard

as per requirement

LU-2 Check thread gauge according to the

requirement

LU-4 Check Accessories

LU-3 Check embellishments

12

48

60

8 | P a g e

Pag

e8

LU-3 Check availability of required machinery/

Tools

Module 8:

Stitch Garment Aim: This module


stich the fabric


LU-2 Ensure proper garment specifications

LU-3 Adjust sewing machine

LU-4 Install thread in Machine

LU-5 Perform stitching of Qameez

LU-6 Perform stitching of Shalwar

LU-7 Perform stitching of Pheron

LU-8 Perform stitching of Frock

LU-9 Perform stitching of Dress Shirt

LU-10 Perform stitching of Trouser

LU-11 Perform stitching of Shorts (Niker)

LU-12 Perform embellishments

LU-13 Stitching Size label

LU-14 Stich manually if required

LU-15 Perform over lock

LU-16 Perform Piko

50

200

250

9 | P a g e

Pag

e9

Module 9: Perform Finishing Aim: This module develops competency to ensure finishing of the fabric


LU-2 Check stitching faults

LU-3 Perform trimmings

LU-4 Iron Garment

LU-5 Crease Garment

15

60

75

Module 10: Pack & Deliver Product. Aim: This module develops competency to take proper measurements

LU-1 Arrange poly bags for finished product

LU-2 Arrange carton for packing

LU-3 Maintain record of finished product

LU-4 Prepare invoice

LU-5 Develop packing List

LU- 6 Update customer about completion of

order.

15

60

75

Module 11:

Maintain Stitching

Machine

Aim: This module


take proper

measurements


LU-2 Clean stitching machine

LU-3 Perform oiling of machine

LU-4 Ensure power supply/wiring

LU-5 Check proper functioning of machine

10

30

40

Module 12:

Work in a Team

LU-1 Perform duties and responsibilities in a

positive manner to promote cooperation

10 | P a g e

Pag

e10

Aim: This module


take proper

measurements

and good relationship

LU-2 Seek assistance from co-workers when

difficulties arise and solve through

discussion

LU-3 Respect difference in personal beliefs

and values during all activities and

interactions.

LU-4 Share information related to group

Members.

LU-5 Provide support to achieve

organizational goals.

LU-6 Communicate with clients.

LU-7 Communicate with vendors

LU-8 Communicate with employers

20

20

40

Module 13:

Manage Time

Aim:

This module develops

competency to manage

time effectively while

working in an

organization.

LU-1 Complete the assigned work within the stipulated time frame

LU-2 Manage work load as required by the

Management.

LU-3 Prioritize tasks in accordance with the

importance of the tasks.

LU-4 Meet the specified deadlines.

LU-5 Handle the co-workers using effective

time management.

10

30

40

11 | P a g e

Pag

e11

Module 14:

Apply Health & Safety

Rules

Aim: This module


take proper

measurements

LU-1 Learn health, safety and security

Procedures.

U-2 Learn work place, health and security

requirements.

LU-3 Learn planning, organizing and safe

work techniques.

LU-4 Learn to deal hazardous or emergency

situations.

LU-5 Analyze proper cutting table height &

Sitting posture during stitching.

LU-6 Analyze wiring of electricity.

LU-7 Learn short circuiting management drill

LU-8 Learn evacuation drill for emergency

20

20

40

Module 15:

Upgrade Skills

Aim: This module


take proper

measurements

LU-1 Attend training programs

LU-2 Attend seminars/workshops

LU-3 Consult seniors

LU-4 Read books & training manuals

LU-5 Use electronic media (TV, Internet,

Radio etc.)

25

25

50

Total Hours 339 1141 1480

12 | P a g e

Pag

e12

DRESS MAKING CURRICULUM CONTENTS

Module 1 Title: Learn Basic Knowledge of Fabric/Garment

Objective of the Module: After completion of this module the trainee will be able to learn Basic Knowledge of

Fabric/Garment.

Duration: 100 hours Theory: 20 hours Practice: 80 hours

Learning

Unit

Learning

Outcome

Learning

Elements

Duration Hours

Material Required

Learning Place

LU-1

Analyse types of

Garments

Understand

different types of

garments

Able to differentiate

various types of

garments e.g

Trouser, Niker,

Shorts, Shalwar,

Qamez, etc

Knowledge of various types

of garments according to

market segment/demand

Ability to differentiate various

types of garments

Total: 15 Hrs Thry 3 Hrs Prac :1 2 Hrs

Different type of sample garments

Writing book to take key notes

Workshop/workplace

LU-2

Check Parts or

panels

of Garments

Understand the

different

parts/panels of

garments e. g front

panel. Back panel

Able to recognize

parts/ components

of specific garment

Knowledge of different parts

of various garments e.g.

Front, Back, Sleeves etc

Ability to distinguish parts/

components of a garment or

provided specifications


Different type of sample garments

Measurement tools

Writing book to take key notes Workshop/workplace

13 | P a g e

Pag

e13

LU-3

Analyse different

types of Fabrics

Understand the

different types of

fabrics e.g wool,

cotton, silk, chiffon

Able to differentiate

weaving of fabrics

according to given

assignment

Knowledge of kinds of

fabric e.g. cotton nylon,

polyester, wool, etc

Ability to differentiate

construction, or thick & thin

& different types of fabrics


Different types of fabrics

Pick glass

Writing book to take key notes

Workshop/workplace

LU-4

Analyse Shrinkage

methods of

fabric

Understand the

need of shrinkage

of provided fabric.

Able to distinguish

between un-

shrinked and

shrinked fabric

Knowledge of width or length

ratio of reduction of fabric

Ability to judge pre shrunken

or un-shrinked fabric.

Total: 14 Hrs Thry : 3 Hrs Prac :1 1 Hrs

Fabric

water

Washing machine for bulk quantity.

bucket for water Workshop/workplace

LU-5

Learn Types/

quality of threads

Understand the

type of thread as

per requirement

Able to select

appropriate thread

as per production

requirement

Knowledge of the gauge of

threads as per requirement.

Ability to check colour

fastness and strength of

thread.


Thread

White cotton swatch to check colour fastness of thread.

water

Workshop/workplace

14 | P a g e

Pag

e14

LU-6

Learn Types of

Embellishments

Understand

different types,

placement and use

of embellishments

e.g button, buckle,

stones etc

Able to calculate

total quantity of

embellishments on

finished garment.

Knowledge of different types

and material quality of

embellishments plastic,

metal, glass etc

Ability to select /arrange

embellishments according to

the customer/garment

requirement.


Embellishments.

Machine for fixation.

Thread

Glue sticks

Glue gun

Workshop/workplace

LU-7

Apply embellishments on garment

Understand the importance of selection proper methods of fixation of the embellishments Able to fix required embellishment properly on proper place

Knowledge of fixation methods as per demand. Ability to stitch/fix embellishment with needle/machine/glue gun etc.


Required Embellishments

Thread

Glue

Glue gun

Machine to fix embellishments Workshop/workplace

15 | P a g e

Pag

e15

Module 2 Title: Learn Measuring Tools and Measuring Concepts

Objective of the Module: After completion of this module the trainee will be able to learn measuring tools and concepts


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Learn use of Measuring tape

Understand the use and handling measuring tape. Able to read markings on measuring tape.

Knowledge of use of measuring tape e. g keeping it straight Ability to understand and calculate centimeters/inches printed on measuring tape

Total: 10 Hrs Thry 2 Hrs Prac : 8 Hrs

Workstation

Measuring tape

Workshop/workplace

LU-2

Learn use of Measuring Scale

Understand use of measuring scale. Able to use appropriate scale according to the sketching/ cutting needs

Knowledge of the handling scale and exact use. Ability to use measuring scale as per pattern demand


Workstation

Scale(wooden)

Workshop/workplace

LU-3 Learn use of French Curve

Understand the use of French curve. Able to use proper direction/ scale of French curve

Knowledge of handling of French curve. Ability to keep curve direction at right angle


Work station

French curve

16 | P a g e

Pag

e16

LU-4

Learn use of L-

shape Scale

Understand concept

of L-shape scale

Able to place L-

shape scale at

appropriate angle

Knowledge of marking methods

with L-shape scale.

Ability to select right angles.

Total: 10 Hrs Thry 2 Hrs Prac : 8 Hrs Workstation

L-shape scale Workshop/workplace

LU-5

Learn measuring

points

Understand

measuring points of

body/garments.

Able to prepare

measurement chart

Knowledge of handling proper

measurements

Ability to confirm body posture

straight.


Workstation

Measuring tape

Measurement chart

Pencil

Workshop/workplace

LU-6

Prepare writing

sheet of

measurement

Understand to

prepare

measurement sheet

with label.

Able to prepare as

per specs.

Knowledge of body/garment

measurement.

Ability to mark label at every

spec.


Workstation

Writing sheet

Measuring scales

Pencil/Pointer Workshop/workplace

17 | P a g e

Pag

e17

Module 3 Title: Initiate Work

Objective of the Module: After completion of this module the trainee will be able to initiate work by taking requirements


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Take requirement from customer

Understand the requirements of client effectively. Able to understand client’s requirements e. g size, style, embellishments, time frame etc

Knowledge of the importance of the customer’s requirements to achieve his/her satisfaction. .

Ability to write details on specs sheet/ or read provided specs sheet effectively

Total: 17 Hrs Thry 3 Hrs Prac : 14Hrs

Specs sheet

Pencil/ Paper

Workshop/workplace

LU-2

Prepare estimate of product cost

Understand the market rates of materials to be arrange for garment production Able to calculate inflation ratio while preparation of estimate

Knowledge of updated market rates and places from which specific material could be purchased. Ability to prepare estimate including profit margins and flexibility of negotiation


Paper

Pencil/ Pen

Telephone for communication

Workshop/workplace

LU-3

Take approval of rates from customer

Understand the prepared rates to get approval from customer Able to communicate

Knowledge of the latest market rates to achieve approval of rates from customer. Ability to argue and convince


Note book to write

Pen/ Pencil

Workshop/workplace

18 | P a g e

Pag

e18

and convince customer for approval of rates.

softly for approval of rates.

LU-4

Arrange Material / fabric

Understand the requirements and sources to arrange fabric/ material e.g. thread, buttons zip lining cloth & embellishments. Able to arrange/ purchase according to approved quantity, quality& rates.

Knowledge of different sources to arrange material e. g market, factory etc& vigilant during purchase of material/ fabric. Ability to calculate exact quantity of required material for production and manage its proper storage.


Sample materials

Sample fabric

Paper

Pen/Pencil

Workshop/workplace

LU-5

Prepare work place

Understand the requirements of work place. Able to Maintain work place properly, as per job requirement

Knowledge of availability & maintenance of work place for smooth production.

Ability to arrange & maintain work place for in time delivery


Required work place

Workshop/workplace

LU-6

Arrange

tools/equipment

Understand the requirements of tools & equipment’s

Knowledge of availability &maintenance of tools and equipment for smooth production.

Total: 16 Hrs Thry 3Hrs Prac : 13Hrs

Required tools e. g Scissors, marker, paper sheet etc

Required equipment e. g sewing machine, iron etc.

Workshop/workplace

19 | P a g e

Pag

e19

Able to Maintain tools and equipment properly, as per job requirement

Ability to arrange &maintain tool and equipment for in time delivery

20 | P a g e

Pag

e20

Module 4 Title: Take Body/ Sample Garment Measurements Objective of the Module: After completion of this module the trainee will be able to take body/ sample garment

measurements.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Measure length

Understand the importance measuring length of total provided fabric & then body/ garment length Able to use measuring tools to take length of total provided fabric & then body/ garment length

Knowledge of length of provided fabric and specified length of garment Ability to measure and take appropriate length of body/ garment.

Total: 11Hrs Thry 3Hrs Prac : 8Hrs

Measuring tape

Measuring scale

L-shape scale

Chalk Marker

Workshop/workplace

LU-2

Measure width

Understand the importance of the measuring width of total provided fabric & then body/ garment width Able to use measuring tools to take width of total provided fabric & then body/ garment width

Knowledge of the importance of the measurement of width different parts of garments. Ability to measure accurately width of different parts of garment and running cloth


Measuring tape

Measuring scale

L-shape scale

Chalk Marker

Workshop/workplace

21 | P a g e

Pag

e21

LU-3

Measure Shoulder

Understand points of shoulders to be measured Able to take measurement and note down on size chart

Knowledge of the right starting and ending points of the shoulder Ability to use measuring tape properly to take size


Measuring Tape

Pencil/Pen

Writing chart

Workshop/workplace

LU-4

Measure sleeves

Understand the points of sleeves to be measured Able to take measurement and note down on size chart.

Knowledge of different points of arms e. g from shoulder to elbow&. Then shoulder to wrist. Ability to use measuring tape properly to take size


Measuring Tape

Pencil/Pen

Writing chart Workshop/workplace

LU-5

Measure armhole

Understand the points of armholes to be measured Able to take measurement and note down on size chart

Knowledge of the importance of the armhole roundness Ability to use measuring tape properly to take size


Measuring Tape

Pencil/Pen

Writing chart Workshop/workplace

LU-6

Measure chest

Understand the method of measuring chest

Knowledge of the importance of chest measurement in the garment.


Measuring Tape

Pencil/Pen Writing chart

Workshop/workplace

22 | P a g e

Pag

e22

Able to take measurement and note down on size chart

Ability to use measuring tape properly to measure chest

LU-7

Measure waist

Understand the method of measuring waist Able to take measurement and note down on size chart

Knowledge of the importance of measurement of waist in the garment Ability to use measuring tape properly to measure waist


Measuring Tape

Pencil/Pen

Writing chart

LU-8

Measure hips

Understand the method of measuring hips Able to take measurement and note down on size chart

Knowledge of the importance of measurement of hips point in the garment& taking measurement from hips point. Ability to use measuring tape properly to measure hips


Measuring Tape

Pencil/Pen

Writing chart

LU-9

Measure slit

Understand the method of measuring slit Able to take measurement and note down on size chart.

Knowledge of the importance of slit measurement in the garment for proper shape of garment. Ability to use measuring tape properly to measure slit.


Measuring Tape

Pencil/Pen

Writing chart

23 | P a g e

Pag

e23

LU-10

Measure neck

Understand the method of measuring neck line Able to take measurement and note down on size chart

Knowledge of the importance of neck measurement in the garment for best fitting according to the customer requirement Ability to use measuring tape properly to measure neck line


Measuring Tape

Pencil/Pen

Writing chart

LU-11

Measure front

neck drop

Understand the method of measuring front neck drop Able to take measurement and note down on size front neck drop

Knowledge of the importance of front neck drop measurement in the in the garment for best fitting according to the customer requirement Ability to use measuring tape properly to take front neck drop points


Measuring Tape

Pencil/Pen

Writing chart

LU- 12

Measure back

neck drop

Understand the method of measuring back neck drop Able to take measurement and note down on size Chart

Knowledge of the importance of back neck drop measurement in the in the garment for best fitting according to the customer requirement Ability to use measuring tape properly to take back neck drop points


Measuring Tape

Pencil/Pen

Writing chart

24 | P a g e

Pag

e24

LU- 13

Measure

Crotch

Understand the method of measuring crotch Able to take measurement and note down the size of crotch.

Knowledge of the importance of crotch measurement in the in the garment for best fitting according to the customer requirement Ability to use measuring tape properly to take crotch points


Measuring Tape

Pencil/Pen

Writing chart

LU- 14

Measure Bottom

Understand the method of measuring bottom Able to take measurement and note down the size of bottom.

Knowledge of the importance of bottom measurement in the in the garment for best fitting according to the customer requirement Ability to use measuring tape properly to take bottom points


Measuring Tape

Pencil/Pen

Writing chart

25 | P a g e

Pag

e25

Module 5 Title: Develop Pattern

Objective of the Module: After completion of this module the trainee will be able to develop pattern


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Arrange material

& tools

Understand the requirements of pattern to be sketched and sources to arrange material & tools Able to arrange material and tools according to approved design of the garment

Knowledge of different sources to arrange material e. g market, factory etc & vigilant during arrangement of quality material & tools. Ability to calculate exact quantity of required material to develop pattern and to arrange proper tools.


Workstation/ table

Sketching Sheet

Markers / Pencils to draw

Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-2

Spread

Pattern sheet on

cutting table

Understand the importance of spreading pattern sheet straight on table. Able to stretch sheet wrinkle free to draw pattern properly

Knowledge of the spreading of pattern sheet according to size of the garment. Ability to spread pattern sheet on proper size of table e. g table should not be smaller than pattern sheet or pattern sheet should not be smaller than pattern to be developed.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-3

Mark

Understand the size chart already

Knowledge of the use of measurement tools to mark

Total: 21Hrs Thry 4Hrs

Workstation/ table

Sketching Sheet

Workshop/workplace

26 | P a g e

Pag

e26

Measurements of Qameez

prepared to develop pattern of Qameez Able to develop marked measurements of Qameez on pattern sheet

Qameez properly on pattern sheet Ability to mark measurements of Qameez on proper places.

Prac : 17Hrs


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

LU-4

Mark Measurements of Shalwar

Understand the size chart already prepared to develop pattern of Shalwar Able to develop marked measurements of Shalwar on pattern sheet

Knowledge of the use of measurement tools to mark Shalwar properly on pattern sheet Ability to mark measurements of Shalwar on proper places.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-5

Mark Measurements of Pheron

Understand the size chart already prepared to develop pattern of Pheron Able to develop marked measurements of Pheron on pattern sheet.

Knowledge of the use of measurement tools to mark Pheron properly on pattern sheet Ability to mark measurements of Pheron on proper places.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

27 | P a g e

Pag

e27

LU-6 Mark Measurements of Frock

Understand the size chart already prepared to develop pattern of frock Able to develop marked measurements of Frock on pattern sheet

Knowledge of the use of measurement tools to mark Frock properly on pattern sheet Ability to mark measurements of Frock on proper places.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-7 Mark Measurements of Dress Shirt

Understand the size chart already prepared to develop pattern of Dress Shirt Able to develop marked measurements of Dress Shirt on pattern sheet

Knowledge of the use of measurement tools to mark Dress Shirt properly on pattern sheet Ability to mark measurements of Dress Shirt on proper places.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-8

Mark Measurements of Trouser

Understand the size chart already prepared to develop pattern of Trouser Able to develop marked measurements of Trouser on pattern sheet

Knowledge of the use of measurement tools to mark Trouser properly on pattern sheet Ability to mark measurements of Trouser on proper places.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

28 | P a g e

Pag

e28

LU-9 Mark Measurements of Shorts (Niker)

Understand the size chart already prepared to develop pattern of Shorts (Niker) Able to develop marked measurements of Shorts (Niker) on pattern sheet

Knowledge of the use of measurement tools to mark Shorts (Niker) properly on pattern sheet Ability to mark measurements of Shorts (Niker) on proper places.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-10

Draw pattern on markings

Understand to shape a pattern as per measurements accurately to develop a quality garment. Able to draw shape pattern on markings according to the provided specifications

Knowledge of drawing a pattern on markings. Ability to draw pattern on markings properly. Join different points of markings using drawing skills.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-11

Perform pattern Cutting

Understand the cutting points marked/ sketched on pattern sheet. Ability to use pair of scissors properly

Knowledge of measurement chart and markings placed on pattern sheet and re-ensure it final cutting of pattern Ability to recheck specs sheet and rematch measurements while performing cutting.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors/ cutter

Workshop/workplace

29 | P a g e

Pag

e29

LU-12 Mark size Grading

Understand the different sizes of the garments i.e small, medium, large & XL Able to develop ratio for different required sizes

Knowledge of marking required size grading on pattern sheet Ability to mark grading as per requirements and to keep record in record book for future reference


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

30 | P a g e

Pag

e30

Module 6 Title: Cut Fabric

Objective of the Module: After completion of this module the trainee will be able to cut fabric


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place


Understand to arrange tools and equipment and there use, able to arrange material and tools according to requirement.

Knowledge of different sources to arrange material e. g market, factory etc. & vigilant during arrangement of quality material & tools. Ability to calculate exact quantity of required material to develop and arrange proper tools.


Workstation/ table

Sketching Sheet


Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Fabric

Workshop/workplace

LU-2 Spread fabric on cutting table

Understand to lay the fabric on cutting table, and able to understand the direction of design and keep fabric straight.

Knowledge of laying right side of fabric the on cutting table, Ability to know nature of fabric before perform cutting.


Workstation/ table

Sketching Sheet

Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-3 Press fabric

Understand fabric heat resistance. Able to press fabric properly knowing its nature.

Knowledge of pressing fabric according to its material,


Workstation/ table

Simple Iron

Steam iron.

Workshop/workplace

31 | P a g e

Pag

e31

Ability to keep monitoring iron heating intensity.

LU-4

Set Pattern on fabric

Understand pattern sizes and technique of spreading pattern at fabric cutting table. Able to arrange material.

Knowledge of setting pattern on fabric. Ability to calculate pattern sizes to control wastage..


Workstation/ table

Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

LU-5

Mark fabric

Understand the exact marking keeping margin lines Able to arrange proper color of marking chalk.

Knowledge of use of stich fabric before marking. Ability to control wastage and demand of design before marking.


Workstation/ table

Marking chalks of different colors. Measuring tape

Measuring scale

L-shape Scale

French curves

Workshop/workplace

LU-6

Cut fabric

Understand the requirement of tools to cut fabric Able to arrange material and tools according to requirement.

Knowledge of cutting different pattern accurate. Ability to calculate exact fabric length and width before cutting.


Workstation/ table

Measuring tape

Measuring scale

L-shape Scale

French curves

Pair of Scissors

Workshop/workplace

32 | P a g e

Pag

e32

Module 7 Title: Ensure Material Quality

Objective of the Module: After completion of this module the trainee will be able to ensure material quality


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1 Check fabric quality soft/semi-soft/hard as per requirement

Understand the fabric quality and its material. Able to differentiate fabric material

Knowledge of different fabric soft or hardness of fabric & tools used to measure its quality. Ability to use pick glass to check construction and per gram weight checking instruments.

Total: 10Hrs Thry: 2Hrs Prac : 8Hrs

Pick Glass

Gram weight instrument/ weighing scale.

Workshop/workplace

LU-2 Check thread/color gauge according to the requirement

Understand the yarn quality, material, and its color fastness. Able to arrange thread material as per fabric requirement

Knowledge of different kinds of yarn use in thread. Ability to calculate exact quantity of thread use in garment and quality of thread as well as its color fastness.


Different shades of threads

Different Yarn threads

Workshop/workplace

LU-3

Check thread quality/ color

Understand process of thread color fastness. Able to arrange fast color thread.

Knowledge of different thread brands, its prices and quality of its color. Ability to use right thread keeping its color and its quality of strengthens.


Required shades of threads

White cloth piece to check colour fastness of thread

Little water to soak thread to check fastness.

Workshop/workplace

33 | P a g e

Pag

e33

LU-4 Check Accessories

Understand fixation of accessories used in a garment its quantity along with quality. Able to arrange accessories before start stitching.

Knowledge of different sources to arrange material e. g market, factory etc & vigilant during arrangement of quality material & tools. Ability to calculate exact quantity of accessories and its quality.


Required accessories

Material to fix accessories

Workshop/workplace

LU-5

Check embellishments

Understand to arrange embellishment requirements according to the garment. Able to arrange embellishment and tools according to approved design of the garment

Knowledge of different sources to arrange embellishment e. g market, factory etc. & vigilant during arrangement of quality material & tools. Ability to calculate exact quantity of required embellishment and its quality.


Required embellishments

Fixation material to fix them

Workshop/workplace

LU-6 Check availability of required machinery/tools

Understand the availability of parts needs to maintain machine. Able to arrange tools

Knowledge of different sources to arrange tools and its easy availability in market. Ability to know running


Required Machines.

Scissors

Paddles

Threads of different Colors and Yarns.

Scales

Workshop/workplace

34 | P a g e

Pag

e34

and parts used in machines. Store to avoid delaying in job.

parts of machine and sharpness of tools which required at any time.

35 | P a g e

Pag

e35

Module 8 Title: Stitch Garment

Objective of the Module: After completion of this module the trainee will be able to stitch garment


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place


Understand the provision of required tools and equipment and its use, able to arrange material and tools according to the specifications. Able to arrange material and tools according to approved design of the garment.

Knowledge of different tools & equipment and arrange in time to meet the target time. Ability to arrange repair /service of tools/ equipment in case of problem


Workstation/ table

Sketching Sheet

Measuring tape

Measuring scale

Stitching Machine

Thread

Pair of Scissors

Thread clipper

Workshop/workplace

LU-2

Confirm proper Garment specifications

Understand the importance of reconfirmation of garment specification before final stitching Able to match specifications with size chart

Knowledge of specification sheet and fabric quality. Ability to confirm and arrange relevant material before starting final work.


Workstation/ table

Sketching Sheet

Measuring tape

Measuring scale

Stitching Machine

Thread

Pair of Scissors

Thread clipper

Workshop/workplace

LU-3

Adjust sewing machine

Understand to adjust sewing machine

Knowledge of the different adjustments of the machine


Workstation/ table

Measuring tape

Measuring scale

Workshop/workplace

36 | P a g e

Pag

e36

before starting work Able to adjust the needle according to the fabric provided for stitching.

according to the fabric and thread quality Ability to handle stitching machine accurately and ensure safety measures while starting work i. e power supply, rubber shoes, proper height of table etc.

Stitching Machine

Thread

Pair of Scissors

Thread clipper

LU-4

Install thread in machine

Understand to install thread according to the requirements Able to install thread to start work

Knowledge of different types of threads and its needle No accordingly Ability to install thread in right direction of the needle.


Workstation/ table

Stitching Machine

Thread

Pair of Scissors

Thread clipper

Workshop/workplace

LU-5 Operate stitching machine to stitch Qameez

Understand the operation of stitching machine and its speed. Able to control fabric and speed of stitching machine while running of machine.

Knowledge of speed of machine and production time of a garment. Ability to sit long hours to complete the given task and control on fabric, thread & machine simultaneously.

Total: 20Hrs Thry: 4Hrs Prac :16Hrs

Workstation/ table

Stitching Machine

Thread

Measuring tape

Pair of Scissors

Thread clipper Workshop/workplace

LU-6

Operate stitching machine to stitch

Shalwar

Understand the operation of stitching machine and its speed.

Knowledge of speed of machine and production time of a garment.


Workstation/ table

Stitching Machine

Thread

Measuring tape

Pair of Scissors

Workshop/workplace

37 | P a g e

Pag

e37

Able to control fabric and speed of stitching machine while running of machine.

Ability to sit long hours to complete the given task and control on fabric, thread & machine simultaneously.

Thread clipper

LU-7

Operate stitching

machine to stitch

Pheron




Workstation/ table

Stitching Machine

Thread

Measuring tape

Pair of Scissors


LU-8

Operate stitching machine to stitch Frock




Workstation/ table

Stitching Machine

Thread

Measuring tape

Pair of Scissors


LU-9 Operate stitching machine to stitch

Understand the operation of stitching

Knowledge of speed of machine and production time of a


Workstation/ table

Stitching Machine

Workshop/workplace

38 | P a g e

Pag

e38

Dress Shirt

machine and its speed. Able to control fabric and speed of stitching machine while running of machine.

garment. Ability to sit long hours to complete the given task and control on fabric, thread & machine simultaneously.

Thread

Measuring tape

Pair of Scissors

Thread clipper

LU-10

Operate stitching

machine to stitch

Trouser




Workstation/ table

Stitching Machine

Thread

Measuring tape

Pair of Scissors


LU-11

Operate stitching machine to stitch Shorts (Niker)




Workstation/ table

Stitching Machine

Thread

Measuring tape

Pair of Scissors


39 | P a g e

Pag

e39

LU-12 Attach Embellishment

Understand the proper method to attach embellishments Able to use different methods to attach embellishment according to the requirements.

Knowledge of proper fixation methods of embellishments Ability to fix embellishments according to the requirements e. g With needle, with machine, with glue etc.


Workstation/ table

Needle

Glue gun

Glue

Punching machine Workshop/workplace

LU-13

Stitching Size label

Understand the importance of stitching/fixing size label on garment. Able to distinguish different size and select proper label accordingly

Knowledge of specification sheet and to match proper size label accordingly to fix on garment. Ability to stitch size label properly on specified place on garment


Workstation/ table

Stitching Machine

Measuring tape

Pair of Scissors

Thread clipper

LU-14

stitch manually if required

Understand the importance stitching manually with needle according to the requirements Able to work with needle on specified portions of the garment.

Knowledge of different type of stitches use for hand work. Ability to perform manual stitching if required to finish a garment.


Needle

Thread

40 | P a g e

Pag

e40

LU-15 Perform Over lock

Understand the importance of over lock to control threads after stitching Able to work on over lock machine.

Knowledge of over lock machine and thread use. Ability to operate over lock machine if machine is not available then arranges sources to get work done.


Over lock machine

Thread

Thread clipper

LU-16 Operate Piko

Understand the importance of Peko if required Able to work on Piko machine.

Knowledge of Piko machine and types of threads and wire to use. Ability to operate Peko machine and finishing quality or edges, if machine is not available then arrange sources to get work done.


Piko machine

Thread

Thread clipper

41 | P a g e

Pag

e41

Module 9 Title: Perform Finishing

Objective of the Module: After completion of this module the trainee will be able to perform finishing.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Select required Tools

Understand the requirement of tools and arrange it accordingly Able to arrange material and tools according to approved design of the garment

Knowledge of different tools use to perform finishing. Ability to arrange repair /service of tools/ equipment in case of problem


Workstation/ table

Thread clipper

Cutting Scissors

Workshop/workplace

LU-2 Check stitching faults

Understand the importance of checking of any type of fault left in the garment. Able to check thoroughly and point out faults before delivery to customer.

Knowledge of the faults and tools used to rectify the fault i.e. thread clipper to cut extra thread left while stitching. Ability to check garment after stitching to perform finishing.


Workstation/ table

Pair of Scissors

Thread clipper

Stain removing chemical. Workshop/workplace

LU-3

Perform trimmings

Understand the use of trimmer of threads Able to perform trimming for final

Knowledge of the use of thread clipper/ trimmer Ability to work carefully and control to avoid any cut in


Trimmer/thread cutter

Workshop/workplace

42 | P a g e

Pag

e42

finishing of the garment

garment during work due to sharpness of tool.

LU-4

Iron garment

Understand the importance to iron the garment to perform finishing. Able to use iron controlling its heat properly

Knowledge of different gauges of heat to iron specific fabric, i.e. low heat for nylon fabric or medium heat for polyester fabric Ability to follow safety rules apply on ironing place i.e. wire of iron, rubber shoes, safety precaution in case of burning of any fabric due to overheat.


Iron

Iron bed on ironing table

Water sprinkle bottle

Rubber shoes Workshop/workplace

LU-5 Crease garment

Understand the importance of proper creasing of garment. Ability to crease garment according to packing material

Knowledge of packing material size to fit properly in it. Ability to crease the garment after ironing.


Iron

Workshop/workplace

43 | P a g e

Pag

e43

Module 10 Title: Pack & Deliver Product

Objective of the Module: After completion of this module the trainee will be able to to pack & deliver product.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Arrange poly bags for finished product

Arrange proper size poly bags for finished product.

Knowledge of different gauges and sizes of poly bags according to the requirements. Ability to pack product in poly bags.


Poly bags of specified size

Workshop/workplace

LU-2

Arrange carton for packing

Understand the importance proper size and thickness of carton to avoid any damage during transportation

Knowledge of the articles to be packed in a carton. Ability to arrange quality packing material in time to avoid any delay in shipment.


Cartons

Packing tape

Markers to mark

Labels to write specification/ details of packed product into the carton

Workshop/workplace

LU-3 Maintain record of finished product

Understand the importance of maintenance of proper record of finished product. Able to prepare record on ledger book or in computer

Knowledge of record keeping & computer awareness (Microsoft Excel) Ability to keep record for future references or to provide customer at the time of payment.


Ledger books

Pen

Computer

Workshop/workplace

LU-4

Prepare Invoice

Understand the

Knowledge of invoice writing to

Total: 15Hrs

Invoice sheets

Workshop/workplace

44 | P a g e

Pag

e44

method to write invoice Able to calculate quantity of garments and its approved rates to prepare invoice.

deliver with product.

Ability to write by hand or to compose on computer and take its printout.

Thry: 3Hrs Prac :12Hrs

Pen

Computer

Printer

LU-5

Develop packing List

Understand the importance to develop packing list for proper delivery. Able to calculate quantity of garments to prepare packing list to provide to the customer

Knowledge of the spreading of pattern sheet according to size of the garment. Ability to write by hand or to compose on computer and take its printout.

.


Paper

Pen

Computer

Printer

Workshop/workplace

LU-6

Update customer about completion of order

Understand the importance to update customer about completion of order to develop good will. Able to develop mark measurements on pattern sheet

Knowledge of the use of measurement tools to mark properly on pattern sheet Ability to speak directly to the customer.


Address of customer

Telephone

Computer/ Internet service Workshop/workplace

45 | P a g e

Pag

e45

Module 11 Title: Maintain Stitching Machine 12

Objective of the Module: After completion of this module the trainee will be able to maintain stitching Machine


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place


Understand the provision of required tools and equipment and its use, able to arrange material and tools according to the specifications. Able to arrange material and tools required for maintenance.

Knowledge of different tools & equipment and arrange in time

Ability to arrange repair /service of tools/ equipment in case of problem

Total: 05Hrs Thry 01Hrs Prac: 04Hrs

Oil for greasing the Machine

Tool kit

Workshop/workplace

LU-2 Clean stitching Machine

Understand the importance of cleaning stitching machine after use. Able to clean different parts of machine with cotton cloth and remove burr from shuttle.

Knowledge of parts of the machine

Ability to perform cleaning after use and to cover properly after it to avoid dust particles.


Cotton cloth

Kerosene oil

Workshop/workplace

LU-3

Perform oiling of machine

Understanding of parts of Stitching

Knowledge proper oil fit to use for oiling of stitching machine

Total: 10Hrs Thry: 2Hrs

Machine oil

Oil cane Workshop/workplace

46 | P a g e

Pag

e46

Machine to be oiled Able to oil properly and to avoid oil excessively which may cause bad staining on next stitching fabric

Ability to perform oiling of different parts of the machine and improve its performance.

Prac : 8Hrs

LU-4

Ensure power supply/wiring

Understand the importance of safe wiring and regular voltage supply. Able to check wiring to avoid any short circuiting

Knowledge of main switch of power supply to use immediately in case of short circuiting Ability to maintain minor wiring issues i.e changing the plug &to tape necked wire


Electrical tools

Tape to mask the wiring

Tester Workshop/workplace

LU-5

Check proper functioning of machine

Understand the proper functioning of machine to achieve quality work Ability to set tension of thread and adjust the shuttle to get required results

Knowledge of different parts of the machine to achieve best performance.


Machines used for stitching

Workshop/workplace

47 | P a g e

Pag

e47

Module 12 Title: Work in a Team

Objective of the Module: After completion of this module the trainee will be able to work in a team.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1

Perform duties/ responsibilities in a positive manner

Understand the job duties and responsibilities so as to cooperate with co-workers effectively

Explain job description form and its link with co-workers for good relationship.


Handouts

Case studies

Role play sheets

Activity sheets

Class Room/ Workplace

LU-2

Seek assistance from co-workers

Understand the problem solving and conflict resolution techniques Able to seek assistance from peers in difficulties for their solution

Explain problem solving and conflict resolution techniques



LU-3

Respect difference in personal beliefs and values during all activities and interactions

Understand the ethical and cultural norms with in a factory Able to respect beliefs and values of co-workers which working

Explain about ethical standards and social norms which working in a factory



48 | P a g e

Pag

e48

LU-4 Share information related to group members

Able to share correct information while working with group members

Explain importance of sharing of information and disadvantages of incorrect information



LU-5

Provide support to achieve

Be able to support the organizational objectives for better results

Explain responsibilities to support organizational objectives for better results.



LU- 6 Communicate with clients

Understand the concept of effective communication and conducive behavior with clients

Explain about communication channels and its importance for conducive behavior with co-workers.


Handouts

Case studies

Role play sheets

Activity sheets



Understand the concept of effective communication and conducive behavior with vendors.

Explain about communication channels and its importance for conducive behavior with vendors.



LU-8

Communicate with employers

Understand the concept of effective communication and conducive behavior with employers.

Explain about communication channels and its importance for conducive behavior with employers.



49 | P a g e

Pag

e49

Module 13 Title: Manage Time

Objective of the Module: After completion of this module the trainee will be able to manage.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1 complete the assigned work within the stipulated time frame

Able to understand self management and time management skills Able to management time as per the requirement

Explain time management and self management skills


Handouts

Case studies

Role play sheets

Activity sheets Class Room/ Workplace

LU-2

Manage work load as required by the management

Able to understand the work load management techniques as per the requirement

Explain work load management techniques


Handouts

Case studies

Role play sheets

Activity sheets


LU-3

Prioritize tasks in accordance with the importance of the tasks

Able to prioritize the task i.e. high, medium and low priority tasks.

Explain importance and methods of task prioritization at work place


Handouts

Case studies

Role play sheets

Activity sheets


LU-4 Meet the specified deadlines

Able to meet the required and specified deadlines of a task

Explain how to meet the required and specified deadline of a task


Handouts

Case studies

Role play sheets

Activity sheets Class Room/ Workplace

50 | P a g e

Pag

e50

LU-5 Handle the co-workers using effective time management

Able to handle co-workers by unsung effective time management techniques

Explain how to handle co-workers with effective time management for better coordination and productivity


Handouts

Case studies

Role play sheets

Activity sheets


51 | P a g e

Pag

e51

Module 14 Title: Apply Health & Safety rules

Objective of the Module: After completion of this module the trainee will be able to apply health and safety rules.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1 Knowledge of health, safety and security procedures

Understand the importance of health, safety and security procedures for life safety and to maintain healthy life style Able to follow health and safety measures and arrange safety instruments i.e fire Extinguisher or sand buckets at least at work place.

Knowledge of hygiene and importance of cleanliness of the work place . Ability to maintain healthy work environment and take safety precautions to avoid any misshapen

Total: 05Hrs Thry 2.5Hrs Prac: 2.5Hrs

Tools/ equipment for cleanliness.

Sand buckets

Fire

Extinguisher

Workshop/workplace

LU-2

Follow work place, health safety and security requirements

Understand the workplace safety and security measures & install proper electricity wiring. Able to follow health & safety instructions carefully i.e avoid smoking on work place, don’t spit there etc

Knowledge how to display health and safety signs for co-workers. Ability to read health and safety signs carefully and follow instructions and maintain required security measures.


Health and safety signs

Workshop/workplace

52 | P a g e

Pag

e52

LU-3 Follow planning, organizing and safe work techniques

Understand to organize safety measures and sfe work techniques i.e keep sharp tools on safe and out of range of other workers. Able to organize work with safe techniques i.e keep the sewing machine powered off when not in use.

Knowledge of the safety techniques and plan it properly i.e exits of work place, air exhausts, ventilations, space on work place Ability to learn how to organize work in more safety environment.


Leaf lets

Brochures

Display safety technique charts

Fire Extinguishers

Sand buckets

Workshop/workplace

LU-4

Deal with hazardous or emergency situations

Understand how to deal with hazardous or emergency situations. Able to manage work place in case of emergency situations

Knowledge how to handle different emergencies and Phone No of rescue services to call for help Ability to manage first aid to him/herself or to co-workers in case of emergency. To get rid of hazardous situation.


First Aid box

Telephone No of emergency services

Workshop/workplace

53 | P a g e

Pag

e53

LU-5 Proper cutting table height

Understand the proper height of table. Ability to use cutting table to cut the fabric/Pattern

Knowledge of standard height of table Ability to work on cutting table.


Workstation/ cutting

table

Workshop/workplace

LU-6 Wiring of electricity

Understand the need of safe wiring to avoid electric shock or short circuiting. Ability to deal with minor electricity repairs

Knowledge of proper wiring on work place Ability to identify poor wiring to avoid any future problem.


Electrician tools

Plastic tape to cover naked wire

Rubber shoes to avoid electric shock.

Rubber gloves to wear while handling electric wirings.

Workshop/workplace

LU-7

Short Circuiting management drill

Understand the need of emergency exit of work place in case of short circuiting. Ability to do short circuiting drill for training.

Knowledge of proper shut down valve in case of emergency at work place Ability to rush in case of short circuiting .


Electrician tools

Plastic tape to cover naked wire

Rubber shoes to avoid electric shock.

Rubber gloves to wear while handling electric wirings.

Workshop/workplace

54 | P a g e

Pag

e54

LU-8 Evacuation Drill for emergency situation

Understand the need of emergency evacuation from emergency exits in case of emergency. Ability to evacuate work place at once in case of emergency

Knowledge of emergency exits in case of emergency at work place Ability to rush in case of emergency.


55 | P a g e

Pag

e55

Module 15 Title: Upgrade Skills

Objective of the Module: After completion of this module the trainee will be able to upgrade skills.


Learning Unit

Learning Outcome

Learning Elements

Duration (Hours)

Material Required

Learning Place

LU-1 Attend training programs

Understand the importance attending training programmes Able to follow new trends demonstrated in these programmes

Knowledge of institutions who conduct training programmes Ability to learn in these training Programmes.


Sketching Sheet

Markers / Pencils to draw and write.

Voice recorder

Video Camera

Training Institutes

LU-2

Attend seminars/workshops

Understand the related topics to the field of dress making properly. Able to follow skills introduced in these seminars & workshops

Knowledge of the traditional/ latest requirements of market while attending workshops/seminars Ability to understand and communicate while attending the workshops/seminars


Sketching Sheet


Voice recorder

Video Camera

Class rooms/ venues developed for conducting workshop/seminars

LU-3

Consult seniors

Understand the importance of experience of seniors Able to talk about his/her issues related

Knowledge of the experience of her/his senior to consult specific issue Ability to feel free while consultation & to get


Sketching Sheet


Voice recorder

Video Camera

Meeting Rooms/ Places

56 | P a g e

Pag

e56

to field of dress making

solutions of problem

LU-4 Read books & training manuals

Understand to the instructions given in books and training manuals. Able to read and follow instructions properly written in book/ training manuals

Knowledge of latest fashion books and market segment for whom he/she is working while consulting these books/ training manuals Ability to understand and follow new patterns instructed in these books/ training manuals. .


Books

Fashion Magazines

Training Manuals

Book shops Training institutes

LU-5 Use electronic media (TV, Internet, Radio etc.)

Understand the importance of watching/ listening electronic media. Ability to watch carefully to follow any new fashion trends.

Knowledge of fashion channels/ websites related to fashion garment trainings Ability to read or listen instructions carefully.


Radio

TV

Computer

Internet service

Workplace

57 | P a g e

Pag

e57

Assessment Dress Making Curriculum

Module 1 Title: Learn Basic Knowledge of Fabric/Garment

Objective of the Module: After completion of this module the trainee will be able to learn Basic Knowledge of

Fabric/Garment.

Learning Unit

Theory Days/hours

Workplace Days/hours

Recommended Formative Assessment

Recommended Methodology

Scheduled Dates

LU-1

Analyse types of Garments

20 hours

80 hours

Trainee will:

Explain different types of garments.

Describe the difference between trouser and dress Niker.

Explain difference between frock and dress shirt.

Oral

Practical/ Demonstration

MCQs

Written test

At the end of the module

LU-2

Check Parts or panels of Garments

Trainee will:

Explain difference between front & back panel of a shirt.

Describe different parts of a shirt.

Demonstrate total panels of a ladies shirt.

LU-3

Analyse Different types of Fabrics

Trainee will:

Explain different types of fabrics

Describe the difference between cotton and wool.

58 | P a g e

Pag

e58

LU-4

Analyse Shrinkage methods of fabric

Trainee will:

Explain the use of pick glass.

Explain how to find construction of fabric.

Why to need to shrink a fabric Explain the method to shrink a

piece of shirt Explain the method to shrink 20

yards length fabric

LU-5 Learn Types/quality of threads

Trainee will:

Explain threads quality means.

How to check color fastness of threads.

Describe Types of threads.

LU-6

Learn Types of Embellishments

Trainee will:

Describe meanings of embellishments

Describe in detail which types of embellishments use by male and females.

Describe the name of embellishments used on a male trouser.

Demonstrate few embellishments

59 | P a g e

Pag

e59

LU-7 Apply embellishments on garment

Trainee will:

.

Describe different types of embellishments

Explain the use of glue gun for fixation of embellishments.

How to fix buttons on a shirt.

Explain the different methods to fix stones on a garment.

60 | P a g e

Pag

e60

Module 2 Title: Learn Measuring Tools and Measuring Concepts

Objective of the Module: After completion of this module the trainee will be able to learn measuring tools and concepts

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Learn use of Measuring tape

12 hours

48 hours

Trainee will:

Explain the importance of measuring tape

Demonstrate two types of scales printed on the measuring tape.

Describe how many centimeters makes one meter

Describe how many inches are equal to one meter

Oral


MCQs

Written test


LU-2 Learn use of Measuring Scale

Trainee will:

Explain the importance of measuring scales

Describe digits use in measuring scale.

Explain the ideal material for measuring scale used for tailoring?

LU-3

Learn use of French Curve

Trainee will:

Explain the importance of French curves.

Explain the use of French curves.

Describe the parts of garment

61 | P a g e

Pag

e61

where French curve is required.

LU-4

Learn use of L-shape Scale

Trainee will:

Explain the importance of measuring L shape scales

Explain the use of L- shape scales.

Demonstrate the difference between measuring tape and L-shape scale.

LU-5

Learn measuring points

Trainee will:

Explain the importance of straight body posture during measurement.

Explain how to take measuring points

Describe where to write measuring points

LU-6

Prepare writing sheet of measurement

Trainee will:

Explain the importance of measurement sheet.

Explain how to label measuring sheet

Describe how to write measuring sheet according to the specs.

62 | P a g e

Pag

e62

Module 3 Title: Initiate Work

Objective of the Module: After completion of this module the trainee will be able to initiate work by taking requirements

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Take requirement from customer

20 hours

80 hours

Trainee will:

Explain the importance of gathering requirements from the customer.

Describe how to mention details taken from customer.

Explain what type of requirements should be taken from customer?

Oral


MCQs

Written test


LU-2

Prepare estimate of product cost

Trainee will:

Explain why it is important to prepare estimate of product cost.

Explain how to estimate rate of a sample (provided) garment.

Explain how to include personal profit while preparing estimate.

LU-3 Take approval of rates from customer

Trainee will:

Explain why approval of rates from customer is important before starting the work.

63 | P a g e

Pag

e63

Describe knowledge of market rates importance.

Explain the parameters how to take approval of rates from customers.

Describe the language used while taking approval of rates from the customer?

LU-4

Arrange Material / fabric

Trainee will:

Explain steps of arranging material from market.

Describe how to arrange material to produce a garment?

Explain from where fabric should be purchased.

Describe the importance to arrange all the material before starting the production.

LU-5

Prepare work place

Trainee will:

Explain the requirements for a workplace,.

Demonstrate how to maintain a work place?

Describe the importance of proper work place to improve production quality.

64 | P a g e

Pag

e64

LU-6

Arrange

tools/equipment

Trainee will:

Describe the names of tools used for stitching a garment.

Explain the difference between manual & electric sewing machine.

Explain the importance of iron while stitching.

65 | P a g e

Pag

e65

Module 4 Title: Take Body/ Sample Garment Measurements

Objective of the Module: After completion of this module the trainee will be able to take body/ sample garment

measurements.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Measure length

30 hours

120 hours

Trainee will:

Explain the meaning of taking length of a garment.

Demonstrate how to take body length of a garment.

Explain why total length of provided fabric is important.

Oral


MCQs

Written test


LU-2

Measure width

Trainee will:

Explain how to measure width of a garment.

Describe the meaning of taking width of a garment?

Explain why total width of provided fabric is important.

LU-3

Measure

Shoulder

Trainee will:

Explain how to measure shoulder.

Describe why measurement of shoulder is important

Explain how much cm is

66 | P a g e

Pag

e66

added in final measurement

Describe the tool used to take measurement of shoulder?

Explain starting and ending points of shoulder.

LU-4

Measure sleeves

Describe the starting point of sleeves

Explain how to take measurement of sleeves

Describe the ending point of a sleeve in case of full sleeves shirt.

LU-5

Measure

armhole

Trainee will:

Explain the meaning of armhole

Explain how to take measurement of armhole

Demonstrate the scale used to measure armhole.

LU-6

Measure chest

Trainee will: Explain from where to measure chest.

Explain why measurement of chest is important.

67 | P a g e

Pag

e67

Explain what type of measuring scale is used to measure chest.

Describe where you write measurement of chest.

LU-7

Measure waist

Trainee will:

Explain why measurement of waist is important in taking measurements

Describe what type of measuring scale is used to take waist measurement.

Explain where you write measurement of waist.

LU-8

Measure hips

Trainee will:

Explain the importance of measurement of hips.

Explain what type of measuring scale is used to take measurement of hips.

Describe where you write measurement of hips.

LU-9

Measure slit

Trainee will:

Explain why measurement of slit is important in taking measurement

Demonstrate what type of

68 | P a g e

Pag

e68

measuring scale is used to take measurement of a slit.

Describe the role of slit in garment fitting

LU-10

Measure neck

Trainee will:

Explain how to take measurement of neck

Demonstrate how to take depth of neck line

Describe the method of taking width of neck.

LU-11

Measure front

neck drop

Trainee will:

Describe how to take front neck drop

Explain where you will write back drop neck measurement.

LU- 12

Measure back

neck drop

Trainee will:

Demonstrate how to take front neck drop.

Explain where you will write back drop neck measurement

69 | P a g e

Pag

e69

LU- 13

Measure

Crotch

Trainee will:

Describe to take measurement of crotch.

Explain where you will write crotch measurement.

LU- 14

Measure Bottom

Trainee will:

Describe how to take measurement of bottom

Explain where you will write bottom measurement

70 | P a g e

Pag

e70

Module 5 Title: Develop Pattern

Objective of the Module: After completion of this module the trainee will be able to develop pattern

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Arrange material

& tools

50 hours

200 hours

Trainee will:

Describe the names of tools used for developing a pattern.

Describe the names of three tools used for developing pattern

Explain the importance developing pattern before cutting fabric

Oral


MCQs

Written test


LU-2

Spread

Pattern sheet on cutting table

Trainee will:

Demonstrate how will you spread pattern sheet

Describe the size of pattern sheet used for developing pattern

Explain what will happen if table is smaller than pattern sheet to be used for developing a pattern

LU-3

Mark Measurements of

Qameez

Trainee will:

Explain how to mark measurement while developing a pattern

Describe how to mark

71 | P a g e

Pag

e71

measurements of Qameez

Explain from where you get notes to mark measurements of Qameez on a pattern sheet.

LU-4

Mark Measurements of Shalwar

Trainee will:


Describe how to mark measurements of shalwar

Explain from where you get notes to mark measurements of shalwar on a pattern sheet.

LU-5 Mark Measurements of Pheron

Trainee will:


Describe how to mark measurements of Pheron

Explain from where you get notes to mark measurements of Pheron on a pattern sheet.

LU-6

Mark Measurements of Frock

Trainee will:

72 | P a g e

Pag

e72


Describe how to mark measurements of frock

Explain from where you get notes to mark measurements of frock on a pattern sheet.

LU-7

Mark Measurements of Dress Shirt

Trainee will:


Describe how to mark measurements of Dress Shirt

Explain from where you get notes to mark measurements of Dress Shirt on a pattern sheet.

LU-8

Mark Measurements of Trouser

Trainee will:


Describe how to mark measurements of Trouser

Explain from where you get notes to mark measurements of Trouser on a pattern sheet.

73 | P a g e

Pag

e73

LU-9 Mark Measurements of

Shorts (Niker)

Trainee will:


Describe how to mark measurements of Shorts (Niker)

Explain from where you get notes to mark measurements of Shorts (Niker) on a pattern sheet.

LU-10 Draw pattern on markings

Trainee will:

Describe why markings are important before drawing a pattern

Explain how you will join different points of pattern

Demonstrate the tool used for curve shapes?

LU-11 Perform pattern Cutting

Trainee will:

Describe the name of tool used for cutting the pattern

Describe the importance of rechecking of markings with specs sheet before final cutting.

Explain the importance of knowledge of pattern sheet to perform cutting.

74 | P a g e

Pag

e74

LU-12 Mark size

Grading

Trainee will:

Explain the meaning of grading

Describe different sizes

Explain why it is important to keep record of grading of a garment.

75 | P a g e

Pag

e75

Module 6 Title: Cut Fabric

Objective of the Module: After completion of this module the trainee will be able to cut fabric

Learning Unit

Theory Days/hours




Scheduled Dates

L LU-1

Arrange tools/equipment

30 hours

120 hours

Trainee will:

Describe the names of tools used to cut the fabric.

Describe the name of main tool used to cut the fabric.

Explain the importance of arranging all the required tools before start cutting.

Oral


MCQs

Written test


LU-2

Spread fabric on cutting table

Trainee will:

Explain why checking of direction of fabric is important

Explain the important points to note at the time of spreading fabric on table.

Describe why nature of fabric is important at the time of cutting.

LU-3

Press fabric Trainee will:

Explain why to press fabric before cutting

Explain the importance of proper heat gauge at the time of ironing.

76 | P a g e

Pag

e76

Explain why monitoring of heating intensity is important while pressing a fabric.

LU-4 Set Pattern on fabric

Trainee will:

Demonstrate how to set pattern on fabric

Describe how to control wastage of fabric at the time of setting pattern

Explain why we keep in mind different size of garment at the time of setting pattern.

LU-5

Mark fabric

Trainee will:

Describe the marking method of fabric.

Describe the name of material used for markings.

Explain what you mean margins at the time of markings.

LU-6

Cut fabric

Trainee will:

Explain the need of sharp pair of scissors at the time of cutting fabric.

Explain why accuracy in cutting is important.

Explain what type of surface is required to cut the fabric

77 | P a g e

Pag

e77

Module 7 Title: Ensure Material Quality

Objective of the Module: After completion of this module the trainee will be able to ensure material quality

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Check fabric

quality soft/semi-

soft/hard as per

requirement

12 hours

48 hours

Trainee will:

Explain different type of fabric qualities

Describe how to check weight of a fabric and name the instrument to check.

Describe the names of different types of fabrics.

Oral


MCQs

Written test


LU-2 Check thread/color gauge according to the requirement

Trainee will:

Explainwhat do you understand by the gauge of thread

Explain different types of thread used for stitching.

LU-3

Check thread

quality/ colour

Trainee will:

Describe the need to check colour of thread before use

Demonstrate to check colour fastness of a thread

LU-4

Check Accessories

Trainee will:

Explain why understanding of

78 | P a g e

Pag

e78

fixation method is important while arranging accessories

Explain why quality assurance is important at the time of arranging accessories

Describe why exact calculation of accessories is important while starting work.

LU-5

Check embellishments

Trainee will:

Explain the meaning of embellishments

Explain why it is important to calculate exact quantity of embellishments before starting work

Name four different types of embellishments.

LU-6

Check availability

of required

machinery/tools

Trainee will:

Describe the importance of checking availability of entire tools and machinery

Explain why in time change or repair of specific parts of machine is important.

Explain sharpening of scissors important.

79 | P a g e

Pag

e79

Module 8 Title: Stitch Garment

Objective of the Module: After completion of this module the trainee will be able to stitch garment

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Arrange tools/equipment

50 hours

200 hours

Trainee will:

Explain if you are making ladies

suit which types of tools and

material will be required?

Explain parts of sewing machine.

Demonstrate the fixation of

bobbin.

Explain function of label where

normally it should be stitched

Oral


MCQs

Written test


LU-2 Confirm proper Garment specifications

Trainee will:

Describe the spec chart and how

to prepare it?

Explain why rechecking of

specification sheet is important

before start stitching.

LU-3 Adjust sewing

machine

Trainee will:

Demonstrate machine

adjustment.

Describe how to check electric

motor power.

80 | P a g e

Pag

e80

Explain how to maintain stich.

LU-4

Install thread in machine

Trainee will:

Explain the function of bobbin.

Demonstrate installation of thread

according to the requirements

Demonstrate installation of

needle.

LU-5

Operate stitching machine to stitch Qameez

Trainee will:

Explain which part of Qameez will

be stitched first.

Explain how to fix arms of

Qameez.

LU-6

Operate stitching machine to stitch

Shalwar

Trainee will:

Explain which part of Shalwar

will be stitched first.

Explain how to fix different parts

of Shalwar

LU-7

Operate stitching

Trainee will:

81 | P a g e

Pag

e81

machine to stitch

Pheron

Explain which part of Pheron will

be stitched first.


of Pheron.

LU-8 Operate stitching machine to frock stitch

Trainee will:

Explain which part of frock will be

stitched first.


of frock.

LU-9

Operate stitching machine to stitch Dress Shirt

Trainee will:

Explain which part of Dress Shirt

will be stitched first.


of Dress Shirt.

LU-10

Operate stitching

machine to stitch

Trouser

Trainee will:

Explain which part of Trouser will

be stitched first.


of Trouser.

82 | P a g e

Pag

e82

LU-11 Operate stitching machine to stitch Shorts (Niker)

Trainee will:

Explain which part of Shorts

(Niker) will be stitched first.


of Shorts (Niker).

LU-12

Attach

Embellishment

Trainee will:

Demonstrate different types of embellishment attachment.

Which glue is used in some embellishment to attach?

LU-13

Stitching Size label

Trainee will:

Why size label is important to attach.

At which part garment size label is attached.

80% cotton 20% nylon what does it means and why it is mounted at garment.

LU-14

stitch manually if required

Trainee will:

What part is required in manual stitching?

Demonstrate manual stitching.

83 | P a g e

Pag

e83

LU-15 Perform Over lock

Trainee will:

Describe over lock is done after stitching or after cutting

Explain why over lock is important.

Demonstrate overclocking..

LU-16

Operate Piko

Trainee will:

Explain why Peko is required.

Demonstrate piko

Explain the Difference between piko and simple machine stitching.

84 | P a g e

Pag

e84

Module 9 Title: Perform Finishing

Objective of the Module: After completion of this module the trainee will be able to perform finishing.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Select required Tools

5 hours

70 hours

Trainee will:

Mention tools name required for stitching

Give name of tool wear at finger during hand stitching.

Demonstrate “L” Shape scale working.

Oral


MCQs

Written test


LU-2

Check stitching faults

Trainee will:

Explain major stitching faults.

What does miss stich means.

Explain why wrinkles appears during stitching.

LU-3

Perform trimmings

Trainee will:

What does trimming means.

Preform trimming

Give name of scissor used for trimming.

LU-4

Iron garment

Trainee will:

Demonstrate ironing at different

85 | P a g e

Pag

e85

material fabric.

Explain in detail steps of ironing during stitching.

LU-5

Crease garment

Trainee will:

Explain in detail of creasing steps during stitching.

Demonstrate Shalwar Kamiz creasing during packing

86 | P a g e

Pag

e86

Module 10 Title: Pack & deliver Product

Objective of the Module: After completion of this module the trainee will be able to pack & deliver product.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Arrange poly bags for finished product

15 hours

60 hours

Trainee will:

Explain sizes of poly bags used for garment packing

Describe what instructions are written at ploy bags.

Demonstrate removing of gum tape.

Oral


MCQs

Written test


LU-2 Arrange carton for packing

Trainee will:

Describe standard sizes of Cartoons.

Demonstrate Packing.

Give sizes and name of gum tapes.

LU-3

Maintain record of finished product

Trainee will:

Explain in detail how to prepare packing list.

Explain why it is important to maintain size tag

Demonstrate final packing.

87 | P a g e

Pag

e87

LU-4 Prepare Invoice

Trainee will:

Explain the invoice means and its important.

Demonstrate invoice.

LU-5

Develop packing List

Trainee will:

Explain in detail how to prepare packing list.

Explain the importance of packing list?

LU-6

Update customer about

completion of order

Trainee will:

Explain importance to update customer about completion of order.

Why it is important to update Clint.

88 | P a g e

Pag

e88

Module 11 Title: Maintain Stitching Machine 12

Objective of the Module: After completion of this module the trainee will be able to maintain stitching Machine

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Select tools/equipment

10 hours

30 hours

Trainee will:

Name tools/equipment required to maintain a machine

Explain why oiling is important for a machine.

Oral


MCQs

Written test


LU-2 Clean stitching machine

Trainee will:

Explain in detail which parts of stitching machine required cleaning.

Explain why it is important to power off machine before cleaning

LU-3 Perform oiling

of machine

Trainee will:

Describe what parts of machine required oiling.

Explain step is taken to avoid stain at fabric

LU-4

Ensure power supply/wiring

Trainee will:

Describe in detail reason of

89 | P a g e

Pag

e89

Power supply failure.

Explain how to tack safety measure to avoid electric hazards.

Explain the wire gauge used for industry.

LU-5 Check proper functioning of machine

Trainee will:

Describe the importance of setting thread on machine

Explain the importance of proper functioning of machine

90 | P a g e

Pag

e90

Module 12 Title: Work in a team

Objective of the Module: After completion of this module the trainee will be able to work in a team.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Perform duties/ responsibilities in a positive manner

10 hours

30 hours

Trainee will:

Explain job description form and its link with co-workers for good relationship.

Oral


MCQs

Written test


LU-2 Seek assistance from co-workers

Trainee will:

Explain problem solving and conflict resolution techniques

LU-3

Respect difference

in personal beliefs

and values during

all activities and

interactions

Trainee will:

Explain about ethical standards and social norms which working in a factory

LU-4

Share information related to group members

Trainee will:

Explain importance of sharing of

information and disadvantages of

incorrect information

91 | P a g e

Pag

e91

LU-5 Provide support to achieve

Trainee will:

Explain importance of sharing of information and disadvantages of incorrect information

LU- 6

Communicate with clients

Trainee will:

Explain about communication channels and its importance

Describe the importance of behavior with clients.

Explain why communication with client is important at different steps of production


Trainee will:

Explain importance of communication with vendors

LU-8

Communicate with employers

Trainee will:

Explain importance of communication with employer

Explain why satisfaction of employer

is important

92 | P a g e

Pag

e92

Module 13 Title: Manage time

Objective of the Module: After completion of this module the trainee will be able to manage.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

complete the assigned work within the stipulated time frame

10 hours

30 hours

Trainee will:

Explain time management and self management skills

Oral


MCQs

Written test


LU-2 Manage work load as required by the management

Trainee will:

Explain work load management techniques

LU-3

Prioritize tasks in accordance with the importance of the tasks

Trainee will:

Explain importance and methods of task prioritization at work place

LU-4

Meet the specified deadlines

Trainee will:

Explain how to meet the required and specified deadline of a task.

LU-5 Handle the co-workers using

Trainee will:

Explain how to handle co-workers

93 | P a g e

Pag

e93

effective time management

with effective time management for better coordination and productivity

94 | P a g e

Pag

e94

Module 14 Title: Apply Health & Safety Rules

Objective of the Module: After completion of this module the trainee will be able to apply health and safety rules.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Knowledge of health, safety and security procedures

20 hours

20 hours

Trainee will:

Explain and demonstrate

occupation, health and safety

practices working at a station

Oral


MCQs

Written test


LU-2 Follow work place, health safety and security requirements

Trainee will:

Explain and demonstrate workplace health, safety and security requirement

LU-3

Follow planning,

organizing and

safe work

techniques

Trainee will:

Explain about safe work techniques

Explain types of hazards on workstation and within factory i.e. fire, back joint and neck damage, cutting hazards etc

LU-4

Trainee will:

95 | P a g e

Pag

e95

Deal with hazardous or emergency situations

Demonstrate to deal with the hazardous or emergency situations

LU-5

Proper cutting table height

Trainee will:

Demonstrate to deal with the hazardous or emergency situations

LU-6

Wiring of electricity

Trainee will:

Describe hazards due to poor electric wiring.

What type of shoes is used during handling electric appliances?

LU-7

Short Circuiting management drill

Trainee will:

Describe short circuiting management drill.

Explain the importance of short circuiting management drill.

What will happen if you don’t know fire exit.

LU-8

Evacuation Drill for emergency situation

Trainee will:

Describe emergency evacuation management drill.

Explain the importance of

96 | P a g e

Pag

e96

emergency evacuation management drill.

Explain what will happen if you don’t know emergency exits of work place?

97 | P a g e

Pag

e97

Module 17 Title: Upgrade Skills

Objective of the Module: After completion of this module the trainee will be able to upgrade skills.

Learning Unit

Theory Days/hours




Scheduled Dates

LU-1

Attend training programs

20 hours

30 hours

Trainee will:

Explain why latest training courses are important

Explain from where you will gain knowledge of new trends.

Describe the names of different sources of training

Oral


MCQs

Written test


LU-2

Attend seminars/ workshops

Trainee will:

Explain the role of attending workshops

Explain how you gain knowledge from seminars

LU-3

Consult seniors

Trainee will:

Explain how seniors are helpful to facilitate you in any given task

“Experience makes a man perfect” is it true or not?

LU-4

Read books & training manuals

Trainee will:

Explain how you will learn from books

Do you think training manuals are helpful for learning?

98 | P a g e

Pag

e98

“Books are always a good friend” is it true or not

LU-5

Use electronic media (TV, Internet, Radio etc.)

Trainee will:

Give names of electronic medias

Describe how internet help you to improve your skills

TV is a good source to learn new trends? Is it true or not, Explain

99 | P a g e

Pag

e99

List of Machinery/Equipment/Tools

(For a Class of 25 Students)

NAME OF TRADE Dress Maker

Duration of Course 1 Year

Sr. No Nomenclature of Equipment/Tools Quantity

1 Measuring Tape.

25

2 Scissors 25

3 Scales 25

4 L-square. 25

5 Curve Square. 25

6 Sewing Machine. 25

100 | P a g e

Pag

e10

0

7 Glue Gun 05

8 Iron. 10

9 Stitch opener. 25

10

Trimmer. 25

11

Finger cap 25

12

Stapler 25

13

Safety pins. 2 Packets

14

Screw Drivers. (Kit) 10

15

Button whole Machine. 2

16

Over-lock Machine. 2

17

Piko machine. 2

101 | P a g e

Pag

e10

1

18

Pick glass 25

19

Weighing Scale 10

20

First aid box 05

21

Re-chargeable light 10

22

UPS 02

23

Generator 02

24

Room Heaters 10

25

Cooler/ Air conditioner 05

26

Water cooler/ Electric cooler 02

27

Washing Machine 02

28

Water bucket 05

102 | P a g e

Pag

e10

2

29

Office table 06

30

Office chairs 18

31

Student chairs 30

32

Drafting /cutting table 10

33

Tables for sewing Machines 25

34

Computer with internet facility 10

35

Computer table 10

36

Printer 02

37

Cabinet for storage of materials 04

38

Packing table 05

39

White board 02

103 | P a g e

Pag

e10

3

40

Carpet As per

requirement

41

Vacuum Cleaner 01

42

Fire Extinguisher 04

43

Sand Buckets 06

44

Stock Registers 05

104 | P a g e

Pag

e10

4

List of Consumable Materials

(For a Class of 25 Students)

Sr. No Name of Material/Items Quantity Per Student For 25 students

1 Machine Oil.

1 Oil cane 25 Oil canes

2 Tailoring Chalks

3 Boxes

3 Needles different types of machines 10 packets 250 packets

4 Thread different types 20 spools 500 spools

5 Pencil. 1 Packet 25 Packets

6 Papers.

50 1250

7 Drafting sheets.

25 625

8 Pattern Sheets (hard card)

25 625

9 Hooks.

10 250

10 Elastic. 25 meters 625 meters

105 | P a g e

Pag

e10

5

11 Poly Bags

100 2500

12 Fusing 5 meters 125 meters

13 Bukram 5 meters 125 meters

14 Cartons 10 250

15 Glue sticks 10 250

16 Medicines/ Bandages/ointments for first aid box

As per requirement

As per requirement

17 Solution tape 1 25

18 Carton packing tape 5 Rolls 125

19 Size tag 50 1250

20 Stain removing solution/ powder As per requirement

21 Patrol/ Diesel for generator

106 | P a g e

Pag

e10

6

As per requirement

Reference Material

Curriculum Stitching TEVTA AJK

The Dressmaker's Technique: Lorna Knight (Author)

Hand outs from Rescue 1122

Hand outs and brochures from chamber of commerce

Dressmaking: The Complete Step-by-Step Alison Smith (Author)

http://www.amazon.com/Dressmaking-Complete-Step-Step-Clothes/product-reviews/0756698200/ref=dp_top_cm_cr_acr_img/178-8983958-9164960?ie=UTF8&showViewpoints=1

http://www.amazon.com/Dressmaking-Complete-Step-Step-Clothes/product-reviews/0756698200/ref=dp_top_cm_cr_acr_img/178-8983958-9164960?ie=UTF8&showViewpoints=1

107 | P a g e

Pag

e10

7

CONTRIBUTIONS FOR DEVELOPMENT OF THIS CURRICULUM

DACUM Working Group

Curriculum Developer Technical Expert

Syed Ali Abbas, Fashion Designer.

Mr. Muhammad Ashraf, Rightway Tailors.

Mr. Muhammad Hanif, Super Dress.

Ms. Azra Sharif,

100 SDC-Danna

Ms. Samina Kausar, VTI.

Ms. Saghir Fatima, VTI.

Syeyda Uzma Gillani, VTI.

Mr. Muhammad Ashraf Walin, VTI,

Mr. Iftikhar Ahmed, Aroosa Tailors.

Ms. Taj Bibi, WVS, Dhirkot.

Ms. Madiha Altaf, 100SDC Panopind.

Mr. Sadaqat Hussain, Uroosa Tailors.

Ms.Shaheen Roohi Instructor

Pakistan Readymade Garments Training Institute (PRGTI), Lahore

Mr. Kamran Sandhu Principal/Project Director Pakistan Readymade Garments Training Institute (PRGTI), Lahore

108 | P a g e

Pag

e10

8

National Curriculum Review Committee (NCRC) Members

Mr. Nasir Iqbal Assistant Director, AJK TEVTA Muzaffarabad

Ms. Samina Kousar, Vocational Training Center, Chiner

Ms. Shazia Malik, Hattian Dupta

Ms. Saghir Fatima, Vocational Training Center, Mirpur, AJk

Ms.Farida Abdullah, Hattain Dupta

Ms. Madiha Altaf, Chakir Ponopindi

Ms. Mussarat Rasheed, Vocational Training Center, Khori, AJK

Ms. Nilofar

DACUM Facilitator

DACUM Coordinator

Mr. Atif Mahmood Assistant Director, NAVTTC, Islamabad

Mr. Muhammad Nasir Khan Deputy Director, NAVTTC, Islamabad

109 | P a g e

Pag

e10

9

Date post:	30-Dec-2016
Category:	Documents
Upload:	ngobao
View:	216 times
Download:	0 times

0 Curriculum for Certificate in Dress Making (Certificate Level – 1 ...

Documents