+ All Categories
Home > Documents > 0031 Assignment

0031 Assignment

Date post: 29-May-2018
Category:
Upload: mohammad-amer
View: 218 times
Download: 0 times
Share this document with a friend

of 32

Transcript
  • 8/9/2019 0031 Assignment

    1/32

    MBA II SEMManagement Information Systems-MB0031

    MB0031

    Registration No: 520922527

  • 8/9/2019 0031 Assignment

    2/32

    ASSIGNMENTSubject code: MB0031Set 1

    Q 1:a. Explain the impact of MIS in the area of police information system?

    Answer: MIS is an Information system which helps in providing the management ofan organization withinformation which is used by management for decision making.

    A management information system (MIS) is a subset of the overall internal controls of a business covering theapplication of people, documents, technologies, and procedures by management accountants to solving businessproblems such as costing a product, service or a business-wide strategy. Management information systems aredistinct from regular information systems in that they are used to analyze other

    information systems applied inoperational activities in the organization. Academically, the term is commonly used to refer to the group ofinformation management methods tied to the automation orsupport of human decision making, e.g. Decision Support Systems, Expert systems,

    and Executive informationsystems.

    An 'MIS' is a planned system of the collecting, processing, storing and disseminating data in the form ofinformation needed to carry out the functions of management. According to Philip

    Kotler "A marketinginformation system consists of people, equipment, and procedures to gather, sort, analyze, evaluate, and distributeneeded, timely, and accurate information to marketing decision makers."

    The terms MIS and information system are often confused. Information systems include systems that are notintended for decision making. The area of study called MIS is sometimes referred

    to, in a restrictive sense, asinformation technology management. That area of study should not be confused with computer science. IT servicemanagement is a practitioner-focused discipline. MIS has also some differences with Enterprise ResourcePlanning (ERP) as ERP incorporates elements that are notnecessarily focused on decision support.

    MIS has a major impact on the functions of any organization. The organization derives benefits from the systemsin the following form:

    a) Speedy access to information,

    b) Interpretation of data,

    c) Quick decisions,

    d) Speedy actions,

    e) increased productivity and thereby increase in the profit

  • 8/9/2019 0031 Assignment

    3/32

    f) Reduced transaction cost.

    MIS characteristics

    In any organization managers will have varieties of tasks to manage. MIS is mainly designed to take care of theneeds of the managers in the organization. Organizations will have different departments like marketing,production, sales, inventory, maintenance etc. Each of these departments function individually and also inrelationship with other departments. Information is available in abundance. MISaids in integrating theinformation generated by various departments of the organization.

    MIS helps in identifying a proper mechanism of storage of data. The data is maintained in such a way that theunnecessary duplication of data is avoided. MIS also helps in establishing mechanism to eliminate redundanciesin data. MIS as a system can be broken down into sub systems. Each such sub syst

    em may be programmed. Thisresults in easy access of data, accuracy of data and information. It helps in maintaining the consistency of data.Function of MIS

  • 8/9/2019 0031 Assignment

    4/32

    The main function of MIS is to help the managers and the executives in the organizationin decision-making.

    Large quantities of data like customers information, competitors information, personnel records, sales data,accounting data etc is collected from internal sources like the Company recordsand external sources like annualreports and publications. The collected data is organized in the form of a database.

    The data from the database is processed and analyzed by using different tools and techniques.

    The results of the analysis are properly presented to the managers to help themin decision-making.Q1. b. What are the functions and disadvantages of MIS?

    Answer: Advantages and Disadvantages, which we feel, is appropriate in the case.

    1) To begin with, in the above Case presentation, the initial paragraph is on the typical work scenario faced by aManager in most of the service sector organization. The amount of pressure he is

    in during his daily routineswork. Here he seems to be senior most and most computer literate among others in

    the office. Hence his bosscomes to him and hands over a letter to him, which mentions about Collaborationover Internet. The manager issupposed to go through the contents and brief everyone by Thursday. Thematter is related to E-Collaboration and E Business. Further there are information on how to get more informationon E-Collabration. There are references of various Internet sites given to gather more inputs on E-Enterprise, EBusiness and E Collaboration. E business systems lay foundation of other Enterprise applications, namely Ecommerce, E-communication and E collaboration.

    To understand and discuss about the above terms we need to know that MIS has been evolving in different formsunder different levels of management. Some of the developments are recent and some are still in the developmentstage. The research continues. With the emergence of Internet, business organization has undergone structural,cultural, and qualitatitive change and a new organization structure has emergedwhich is known as E businessenterprise. In this Enterprise business operations are performed through E Communication and E Collaborationinitiatives. Therefore, E business enterprise has a global market, reach, source

    and global competition.

    E business enterprise is more process driven, tehnology enabled and uses its owninformation and knowledge to

    perform. It has no geographic boundaries as it can extend its operations where Internet works.

    About E Collaboration

    Every business has a number of work scenarios where group of people work together to complete the tasks and to

  • 8/9/2019 0031 Assignment

    5/32

    achieve a common objective. The groups could be teams or virtual teams with different member strength. Theycome together to perform a task to achieve some results. The process is called collaboration. The collaborationnow is possible with e-technologies, which put these teams in network with Internet support for communication,access to different databases and servers. These capabilities help to create collaborative work systems and allowmembers to work together cooperatively onprojects and assignments.

    The biggest advantage of E-collaboration is that it taps the collective wisdom,knowledge and experience of themembers. The collaboration team or group could be within the organisation and between the organisations as well.Since, E-collaboration works on an Internet platform and uses web technology, work group / team need not be atone physical location. They can be at different locations and form a virtual team to work on project or assignment.

    E-collaboration uses E-communication capabilities to perform collaborative tasks, or project assignment. Itseffectiveness is increased by software 'GroupWare' that enables the members of the group to share information,invoke an application and work together to create documents and share them and so on. GroupWare iscollaboration software. E-collaboration helps work effectively on applications like calendaring and schedulingtasks, event, project management, workflow applications, work group applications, document creation andsharing, and knowledge management.

    E-collaboration system components are Internet, Intranet, Extranet and LAN, WANnetworks for communicationthrough GroupWare tools, browsers. Application packages are software suit, which

    help process customerrequirements. It is supported by databases present on various servers like mailserver, material database,knowledge server, document server and so on. 2) MIS for E-business is differentcompared to conventional MISdesign of an organisation. The role of MIS in E-business organization is to deal

    with changes in global market andenterprises. MIS produces more knowledge-based products. Knowledge management system is formally

  • 8/9/2019 0031 Assignment

    6/32

    recognized as a part of MIS. It is effectively used for strategic planning for survival and growth, increase in profitand productivity and so on.

    To achieve the said benefits of E-business organisation, it is necessary to redesign the organisation to realize thebenefits of digital firm.The organisation structure should be lean and flat.2) Get rid of rigid established infrastructure such as branch office or zonal office.

    3) Allow people to work from anywhere.4) Automate processes after reengineering the process to cut down process cycletime.

    Make use of groupware technology on Internet platform for faster response processing.

    3) Advantages and Challenges:

    Internet and networking technology has thrown challenge to enlarge the scope oforganisation where customersand vendors become part of the organisation. This technology offers a solution to communicate, co ordinate andcollaborate with customers, vendors and business partners. E-business enterprise

    is open twenty-four hours, andbeing independent, managers, vendors; customers transact business any time fromanywhere. It has no geographicboundaries as it can extend its operations where Internet works. All this is possible due to Internet and webmoving traditional paper driven organisation to information driven Internet enabled E-business enterprise.

    MIS in E-organisation deviates from traditional report formats to automated intelligent knowledge driven system.It enforces manager to act quickly to response displayed on the screen. Most ofthe decisions of middle andoperational management are delegated to IT-enabled information and knowledge driven systems. They aresupported by the rule-based transaction processing system, decision support systems, expert systems, artificialintelligence (AI) systems, and data warehouse and mining systems. MIS in E-organisation deviates from theconventional model of 'Capture ComputeProcess Analyse Report Think and Act' to 'Point Click Respond Act.

    Challenges:

    One challenge is to convert domestic process design to work for international process, where integration ofmultinational information systems using different communication standards, count

  • 8/9/2019 0031 Assignment

    7/32

    ry specific accounting practices,and laws of security are to be adhered strictly.

    This is just not a technical change in business operations but a cultural changein the mindset of managers and

    workers to look beyond the conventional organisation. It means changing the organization behaviour to takecompetitive advantage of the E-business technology.

    The last but not the least important is the challenge to organise and implementinformation architecture andinformation technology platforms, considering multiple locations and multiple information needs arising due toglobal operations of the business into a comprehensive MIS.

    Q2 a. Write a scenario which shows the applications of OLAP systems?

    Answer: A decision support system is a way to model data and make quality decisions based upon it. Making theright decision in business is usually based on the quality of your data and your

    ability to sift through and analyzethe data to find trends in which you can create solutions and strategies for. DSS or decision support systems areusually computer applications along with a human component that can sift through

    large amounts of data and pickbetween the many choices.

    While many people think of decision support systems as a specialized part of a business, most companies haveactually integrated this system into their day to day operating activities. Forinstance, many companies constantlydownload and analyze sales data, budget sheets and forecasts and they update their strategy once they analyze andevaluate the current results. Decision support systems have a definite structure

    in businesses, but in reality, thedata and decisions that are based on it are fluid and constantly changing.

    28.3 Types of DSSData-Driven DSS

  • 8/9/2019 0031 Assignment

    8/32

    Data-Driven DSS take the massive amounts of data available through the company'sTPS and MIS systems and

    cull from it useful information which executives can use to make more informed decisions. They don't have tohave a theory or model but can "free-flow" the data. The first generic type of Decision Support System is a Data-Driven DSS. These systems include file drawer and management reporting systems,data warehousing andanalysis systems, Executive Information Systems (EIS) and Spatial Decision Support Systems. BusinessIntelligence Systems are also examples of Data-Driven DSS. Data-Driven DSS emphasize access to andmanipulation of large databases of structured data and especially a time-seriesof internal company data andsometimes external data. Simple file systems accessed by query and retrieval tools provide the most elementarylevel of functionality. Data warehouse systems that allow the manipulation of data by computerized tools tailored

    to a specific task and setting or by more general tools and operators provide additional functionality.

    Data-Driven DSS with Online Analytical Processing (OLAP) provide the highest level of functionality anddecision support that is linked to analysis of large collections of historical data.

    Model-Driven DSS

    A second category, Model-Driven DSS, includes systems that use accounting and financial models,representational models, and optimization models. Model-Driven DSS emphasize access to and manipulation of amodel. Simple statistical and analytical tools provide the most elementary level

    of functionality. Some OLAPsystems that allow complex analysis of data may be classified as hybrid DSS systems providing modeling, dataretrieval and data summarization functionality. Model-Driven DSS use data and parameters provided by decision-makers to aid them in analyzing a situation, but they are not usually data intensive. Very large databases areusually not needed for Model-Driven DSS.

    Model-Driven DSS were isolated from the main Information Systems of the organization and were primarily usedfor the typical "what-if" analysis. That is, "What if we increase production ofour products and decrease theshipment time?" These systems rely heavily on models to help executives understand the impact of their decisionson the organization, its suppliers, and its customers.

    Knowledge-Driven DSS

    The terminology for this third generic type of DSS is still evolving. Currently,the best term seems to be

    Knowledge-Driven DSS. Adding the modifier driven to the word knowledge maintains aparallelism in the

    framework and focuses on the dominant knowledge base component. Knowledge-DrivenDSS can suggest or

    recommend actions to managers. These DSS are personal computer systems with spec

  • 8/9/2019 0031 Assignment

    9/32

    ialized problem-solvingexpertise. The "expertise" consists of knowledge about a particular domain, understanding of problems within thatdomain, and "skill" at solving some of these problems. A related concept is Data

    Mining. It refers to a class ofanalytical applications that search for hidden patterns in a database. Data mining is the process of sifting throughlarge amounts of data to produce data content relationships.

    Document-Driven DSSA new type of DSS, a Document-Driven DSS or Knowledge Management System, is evolving to help managersretrieve and manage unstructured documents and Web pages. A Document-Driven DSSintegrates a variety ofstorage and processing technologies to provide complete document retrieval and analysis. The Web providesaccess to large document databases including databases of hypertext documents, images, sounds and video.Examples of documents that would be accessed by a Document-Based DSS are policie

    s and procedures, productspecifications, catalogs, and corporate historical documents, including minutesof meetings, corporate records, andimportant correspondence. A search engine is a powerful decision aiding tool associated with a Document-DrivenDSS.

    Communications-Driven and Group DSS

    Group Decision Support Systems (GDSS) came first, but now a broader category ofCommunications-Driven DSSor groupware can be identified. This fifth generic type of Decision Support System includes communication,collaboration and decision support technologies that do not fit within those DSS

    types identified. Therefore, weneed to identify these systems as a specific category of DSS. A Group DSS is a hybrid Decision Support Systemthat emphasizes both the use of communications and decision models. A Group Decision Support System is aninteractive computer-based system intended to facilitate the solution of problems by decision-makers workingtogether as a group. Groupware supports electronic communication, scheduling, document sharing, and othergroup productivity and decision support enhancing activities We have a number of

    technologies and capabilities in

  • 8/9/2019 0031 Assignment

    10/32

    this category in the framework Group DSS, two-way interactive video, White Boards, Bulletin Boards, and

    Email.

    Q2 b. How does information technology influence the organisations s goals.

    Answer: Software Development Life Cycle (SDLC)

    India Outsourcing > Software Development Life Cycle

    Summary: As in any other engineering discipline, software engineering also has some structured models for softwaredevelopment. This document will provide you with a generic overview about different software developmentmethodologies adopted by contemporary software firms. Read on to know more about

    the Software Development LifeCycle (SDLC) in detail.

    Curtain Raiser

    Like any other set of engineering products, software products are also orientedtowards the customer. It is either marketdriven or it drives the market. Customer Satisfaction was the buzzword of the 80's. Customer Delight is today'sbuzzword and Customer Ecstasy is the buzzword of the new millennium. Products that are not customer or user friendlyhave no place in the market although they are engineered using the best technology. The interface of the product is ascrucial as the internal technology of the product.

    Market Research

    A market study is made to identify a potential customer's need. This process isalso known as market research. Here, thealready existing need and the possible and potential needs that are available in

    a segment of the society are studiedcarefully. The market study is done based on a lot of assumptions. Assumptions are the crucial factors in thedevelopment or inception of a product's development. Unrealistic assumptions can

    cause a nosedive in the entireventure. Though assumptions are abstract, there should be a move to develop tangible assumptions to come up with asuccessful product.

    Research and Development

    Once the Market Research is carried out, the customer's need is given to the Research & Development division (R&D)to conceptualize a cost-effective system that could potentially solve the customer's needs in a manner that is better thanthe one adopted by the competitors at present. Once the conceptual system is developed and tested in a hypotheticalenvironment, the development team takes control of it. The development team adopts one of the software developmentmethodologies that is given below, develops the proposed system, and gives it to

    the customer.

    The Sales & Marketing division starts selling the software to the available cust

  • 8/9/2019 0031 Assignment

    11/32

    omers and simultaneously works todevelop a niche segment that could potentially buy the software. In addition, the division also passes the feedback fromthe customers to the developers and the R&D division to make possible value additions to the product.

    While developing a software, the company outsources the non-core activities to other companies who specialize inthose activities. This accelerates the software development process largely. Some companies work on tie-ups to bringout a highly matured product in a short period.

    Popular Software Development Models

    The following are some basic popular models that are adopted by many software development firms

    A. System Development Life Cycle (SDLC) ModelB. Prototyping Model

    C. Rapid Application Development ModelD. Component Assembly ModelA. System Development Life Cycle (SDLC) ModelThis is also known as Classic Life Cycle Model (or) Linear Sequential Model (or)

    Waterfall Method. This model hasthe following activities.

    1. System/Information Engineering and ModelingAs software is always of a large system (or business), work begins by establishing the requirements for all systemelements and then allocating some subset of these requirements to software. This

    system view is essential when thesoftware must interface with other elements such as hardware, people and other resources. System is the basic and very

  • 8/9/2019 0031 Assignment

    12/32

    critical requirement for the existence of software in any entity. So if the system is not in place, the system should beengineered and put in place. In some cases, to extract the maximum output, the system should be re-engineered andspruced up. Once the ideal system is engineered or tuned, the development team studies the software requirement forthe system.

    2. Software Requirement AnalysisThis process is also known as feasibility study. In this phase, the developmentteam visits the customer and studies theirsystem. They investigate the need for possible software automation in the givensystem. By the end of the feasibilitystudy, the team furnishes a document that holds the different specific recommendations for the candidate system. It alsoincludes the personnel assignments, costs, project schedule, target dates etc.... The requirement gathering process isintensified and focussed specially on software. To understand the nature of the

    program(s) to be built, the systemengineer or "Analyst" must understand the information domain for the software, as well as required function, behavior,performance and interfacing. The essential purpose of this phase is to find theneed and to define the problem that needsto be solved .

    3. System Analysis and DesignIn this phase, the software development process, the software's overall structure and its nuances are defined. In terms ofthe client/server technology, the number of tiers needed for the package architecture, the database design, the datastructure design etc... are all defined in this phase. A software development model is thus created. Analysis and Designare very crucial in the whole development cycle. Any glitch in the design phasecould be very expensive to solve in thelater stage of the software development. Much care is taken during this phase. The logical system of the product isdeveloped in this phase.

    4. Code GenerationThe design must be translated into a machine-readable form. The code generationstep performs this task. If the designis performed in a detailed manner, code generation can be accomplished without much complication. Programmingtools like compilers, interpreters, debuggers etc... are used to generate the code. Different high level programminglanguages like C, C++, Pascal, Java are used for coding. With respect to the type of application, the right programminglanguage is chosen.

    B. Prototyping ModelThis is a cyclic version of the linear model. In this model, once the requirement analysis is done and the design for aprototype is made, the development process gets started. Once the prototype is created, it is given to the customer forevaluation. The customer tests the package and gives his/her feed back to the developer who refines the productaccording to the customer's exact expectation. After a finite number of iterations, the final software package is given tothe customer. In this methodology, the software is evolved as a result of period

  • 8/9/2019 0031 Assignment

    13/32

    ic shuttling of information between thecustomer and developer. This is the most popular development model in the contemporary IT industry. Most of thesuccessful software products have been developed using this model - as it is very difficult (even for a whiz kid!) tocomprehend all the requirements of a customer in one shot. There are many variations of this model skewed withrespect to the project management styles of the companies. New versions of a software product evolve as a result ofprototyping.Back to top

    C. Rapid Application Development (RAD) ModelThe RAD modelis a linear sequential software development process that emphasizes

    an extremely short developmentcycle. The RAD model is a "high speed" adaptation of the linear sequential model

    in which rapid development isachieved by using a component-based construction approach. Used primarily for information systems applications, the

    RAD approach encompasses the following phases:1. Business modelingThe information flow among business functions is modeled in a way that answers the following questions:

    What information drives the business process?What information is generated?Who generates it?Where does the information go?Who processes it?

    2. Data modeling

  • 8/9/2019 0031 Assignment

    14/32

    The information flow defined as part of the business modeling phase is refined into a set of data objects that are neededto support the business. The characteristic (called attributes) of each object is identified and the relationships betweenthese objects are defined.

    3. Process modelingThe data objects defined in the data-modeling phase are transformed to achieve the information flow necessary toimplement a business function. Processing the descriptions are created for adding, modifying, deleting, or retrieving adata object.

    4. Application generationThe RAD model assumes the use of the RAD tools like VB, VC++, Delphi etc... rather than creating software usingconventional third generation programming languages. The RAD model works to reuse existing program components

    (when possible) or create reusable components (when necessary). In all cases, automated tools are used to facilitateconstruction of the software.

    5. Testing and turnoverSince the RAD process emphasizes reuse, many of the program components have already been tested. This minimizesthe testing and development time.Back to top

    D. Component Assembly ModelObject technologies provide the technical framework for a component-based process model for software engineering.The object oriented paradigm emphasizes the creation of classes that encapsulate

    both data and the algorithm that areused to manipulate the data. If properly designed and implemented, object oriented classes are reusable across differentapplications and computer based system architectures. Component Assembly Model leads to software reusability. Theintegration/assembly of the already existing software components accelerates the

    development process. Nowadaysmany component libraries are available on the Internet. If the right componentsare chosen, the integration aspect ismade much simpler.

    Q3. B. Draw a data flow diagram for an hospital management system?

    Answer: Diagram for an hospital management system

  • 8/9/2019 0031 Assignment

    15/32

    Q4. What are the features contributing to success and failures of MIS models?

    Answer.

    Factors Contributing to Success

    MIS is to be success then it should have all the features listed as follows:

    1. The MIS is integrated into the managerial functions. It sets clear objectivesto ensure that the MIS focuses on the

    major issues of the business.2. An appropriate information processing technology required to meet the data processing and analysis needs of theusers of the MIS is selected.3. The MIS is oriented, defined and designed in terms of the user s4. The MIS is kept under continuous surveillance, so that its open system design

    is modified according to thechanging information needs.

    5. MIS focuses on the resultsn and goals, and highlights the factors and reasonsfor non achievement.6. MIS is not allowed to end up into an information generation mill avoiding the

    noise in the information and thecommunication system.7. The MIS recognizes that a manager is a human being and therefore, the systems

    must consider all the humanbehavioral factors in the process of the management.8. The MIS recognizes that the different information needs for different objectives must be met with. Theglobalization of information in isolation from the different objectives leads to

    too much information and informationand its non-use.9. The MIS is easy to operate and, therefore, the design of the MIS has such features which make up a user-friendlydesign.10. MIS recognizes that the information needs become obsolete and new needs emerge. The MIS design, therefore,has a basic potential capability to quickly meet new needs of information.11. The MIS concentrates on developing the information supportn to manager critical success factors. Itconcentrates on the mission critical applications serving the needs of the top managementFactors Contributing to Failures

    Many a times MIS is a failures. The. common factors which are responsible for this are listed as follows:

  • 8/9/2019 0031 Assignment

    16/32

    1. The MIS is conceived as a data processing and not as an information processing system.2. The MIS does not provide that information which is needed by the managers but

    it tends to provide theinformation generally the function calls for. The MIS then becomes an impersonal

    system.3. Under estimating the complexity in the business systems and not recognizing it in the MIS design leads toproblems in the successful implementation.4. Adequate attention is not given to the quality control aspects of the inputs,

    the process and the outputs leading toinsufficient checks and controls in the MIS.5. The MIS is developed without streamlining the transaction processing systemsin the organization.6. Lack of training and appreciation that the users of then information and thegenerators of the data are different,and they have to play an important responsible role in the MIS.7. The MIS does not meetn certain critical and key factors of its users such as

    a response to the query on thedatabase, an inability to get the processing done in a particular manner, lack of user-friendly system and thedependence on the system personnel.8. A belief that the computerized MIS can solve all the managementn problems ofplanning and control of thebusiness.9. Lack of administrative discipline in following the standardized systems and procedures, wrong coding anddeviating from the system specifications result in incomplete and incorrect information.The MIS does not give perfect information to all the users in the organization

    Q5. What are the limitations of ERP Systems? How do ERP packages help in overcoming theses limitations?

    Answer: ERP: Limitations

    Many of the problems that organizations have with ERP systems are due to the inadequate level of investment inongoing training for all personnel involved, including those implementing and testing changes, as well as a lack ofcorporate policies protecting the integrity of the data held in the ERP systemsand how it is used.

    Limitations of ERP include:

    Some customization may involve changing ERP software structure to adapt to the specific workflow and businessprocess of some companies, which is usually not allowed.

    Re-engineering of business processes to fit the "industry standard" prescribed by the ERP system may lead to a lossof competitive advantage.

    Systems can be complex to use. The system may be over-engineered relative to theactual customer needs.

    System can suffer from the "weakest link" problem -an inefficiency in one department or at one of the partners mayaffect other participants in the business process.

  • 8/9/2019 0031 Assignment

    17/32

    Resistance in sharing sensitive internal information between departments can reduce effectiveness of the software.

    There are frequent compatibility problems with various legacy systems of the partners.

    Technical support personnel often give replies to callers that are inappropriatefor the caller's corporate structure.

    Computer security concerns arise, for example when telling a non-programmer howto change a database on the fly,at a company that requires an audit trail of changes so as to meet some regulatory standards.

    ERP systems can be very expensive to install. Vendors can charge sums of money for annual license renewal that isunrelated to size of the company using ERP or its profitability.

    Q6. Explain the relationship between artificial intelligence and neural networks

    with the help of a scenario?

  • 8/9/2019 0031 Assignment

    18/32

    Answer: Two factors are necessary for a method to be useful in a variety of country settings. An analysis techniqueto understand information available is required that is robust and not constrained. And, data of a comparable formatand scope of measurement is needed to enable parallel analysis across countries.

    Artificial intelligence neural networks and Consumer Confidence Surveys fit these criteria. This work provides anexample of the power of this combination.

    NEURAL PATTERNS

    Marketers constantly face the dilemma of how best to implement a winning strategy from one market to another.Thinking globally and acting locally are no longer ideals for international marketers --rather, thinking globally andacting locally are required for growth and profit. Differences in consumer perce

    ption, spending power, need states,and purchase habits complicate discerning the commonalties which are present. Byexample we will provide an

    approach to understanding the link between perceptions and spending that can beimplemented in any market. Twofactors are necessary for a method to be useful in a variety of country settings. An analysis technique to understandinformation available is required that is robust and not constrained. And, dataof a similar format and scope ofmeasurement will be needed to enable parallel analysis across countries. Artificial intelligence neural networkmodels continue to provide a new dimension in data analysis for marketers. Because neural nets require noassumptions about a data set s structure, distribution, independence or relationship, they are able to discoverpatterns present in information that traditional statistical methods cannot address.

    Neural networks use human-like trial and error learning methods to detect patterns existing within a data set.Additionally, neural nets have the ability to ignore data that is not significant and emphasize that data that is mostinfluential. A neural network acquires its intelligence by training with a set of variables or features represented by avariety of encoding methods. This knowledge is then applied as a prediction of the patterns existing in this new datapresented to the network.

    Work by Bechtel et al. (1993) provides compelling evidence that consumer confidence tracking data is a reliablereflection of the macro psychology attitude-behavior link at the aggregate level

    of national economic conditions.Additionally we see confirmation of a strong socio tropic component of consumerconfidence that exists across anumber of EEC states. Much has use has been made of the components of consumer confidence. The ConsumerConfidence Survey of The Conference Board, Inc., New York, is classified as a leading economic indicator by the

    U. S. Department of Commerce. This survey is generally referred to as the world sfirst and best known

  • 8/9/2019 0031 Assignment

    19/32

    psychological indicator. According to Bechtel, adaptations of this index are reported in monthly surveys in each ofthe twelve nations of the European Economic Community.Tracking this index and its various components proves beneficial at a macro analytic level. When attempting to useconsumer confidence in industry specific forecasting, the results are less satisfying. Building on this knowledge, wedevelop neural networks capable of learning the patterns of change over time inconsumer confidence by country.These patterns are related with sales from a number of major retail categories,e.g. department stores, automobiles,grocery, food away from home, etc. Trained neural net models now generalize this

    learning and permit forecasts ofconsumer category sales in future time as well as in new geographic markets. Anexample of a model using neuralnetwork pattern analysis to forecast department store monthly sales is now presented.

    MODEL STRUCTURE

    Guided by Bechtel we are able to construct a parsimonious model. This model is accurate and is of a generalstructure which may be used in a large number of individual countries. Of course

    the model may be refined for eachcountry with specific data available in the CCI study.

    For this example we use neural pattern analysis to forecast the next month department store sales (SIC code 531)using current month confidence measures.

    Neural networks such as the one we use here are comprised of a series of layersof neuron processing nodes (Grey-Tedesco, 1991). One layer each for input and output. Also a layer of neurons known as the hidden is constructedbetween the input and output layers. All neurons in each layer are connected toeach neuron in the next layer -- inputto hidden --hidden to output. These connections are represented by weight values

    which are modified by thenetwork during the course of training the network. Initially these weights are random numbers; as the neural netexamines each new data record these weights change in order for the network output to more closely match theoutput of the current data example. It is the value of these connection weightsthat depict the knowledge gained bythe model. The input vector for the neural network contained a seasonality factor and the monthly ConsumerConfidence Survey for the following:

  • 8/9/2019 0031 Assignment

    20/32

    With the exception of the last two items, there are three categories for each ofthe above confidence measures.

    Therefore, the network input layer contains 26 individual neurons. It is commonwith neural networks to have anoutput vector with more than a single variable to predict. In this model only one month is estimated. Other modelsusing this same confidence survey input are designed to estimate up to three months into the future simultaneously.

    After pre-processing and design, the neural pattern model appears as follows:

    FULLY CONNECTED NEURAL PATTERN MODEL METHOD AND RESULTS

    Monthly data for the period January, 1984 through December, 1994 in the United States is used in this model.Observations are presented to the neural network two at a time. And, the network

    is permitted to process for11,000+ iterations through the data. Training is accomplished with approximately

    90% of data, while the remaining10% is withheld for testing the accuracy of the network s forecasting ability. Using the test data, the model reports areliability factor of 76% when projecting department store sales two months after the current month s confidencedata, and 89% reliability when forecasting one month into the future. We use the

    term reliability to mean the percentchance ofBusiness Conditions EvaluationBusiness Conditions ExpectationPersonal Conditions ExpectationsBuying Plans PersonalDepartment Store Sales

    All data and weights flow this direction Connection Weights the model being correct when forecasting sales for anew month. In other words, this neural pattern model will be correct almost nine

    out of ten times where it projectssales for the next one month. Two meaningful uses of any neural pattern model are: 1) forecasting and 2) theanalysis of the relative importance of the independent or casual variables. Thefollowing table displays the forecastfor the last three months of 1994 using this model. all sales in $MM While the accuracy of this model does varysomewhat (2% to 6%), its application as a planning tool is a breakthrough is a search for commonality inquantifying the trends of consumer confidence.

    Neural patterns are now available as method for marketers to realize the heretofore untapped information availablein a variety of consumer behavior data. This powerful technology is a bridge for

    the passage of global marketingstrategies. As more data is made available from sources through the varied interactive offerings, the ability to gleanknowledge from this information grows in value. Artificial intelligence neural networks continue to offer thegreatest opportunity to realize the expectations facing marketers.

    MBA II SEMFinancial Management - MB0031Set 2

  • 8/9/2019 0031 Assignment

    21/32

    Q1. Explain the different business models that work together in an E-enterprisesystem. Give example foreach?

    Answer: Managing an E-business & Challenges before an E-business -Due to Internet capabilities and webtechnology, traditional business organization definition has undergone a changewhere scope of the enterprise nowincludes other company locations, business partners, customers and vendors. It has no geographic boundaries as itcan extend its operations where Internet works. All this is possible due to Internet and web moving traditional paperdriven organization to information driven Internet enabled E-business enterprise. E-business enterprise is opentwenty-four hours, and being independent, managers, vendors, customers transactbusiness any time from anywhere.Internet capabilities have given E-business enterprise a cutting edge capability

    advantage to increase the businessvalue. It has opened new channels of business as buying and selling can be doneon Internet. It enables to reach newmarkets across the world anywhere due to communication capabilities. It has empowered customers and vendors /suppliers through secured access to information to act, wherever necessary. Thecost of business operations hascome down significantly due to the elimination of paper-driven processes, faster

    communication and effectivecollaborative working. The effect of these radical changes is the reduction in administrative and managementoverheads, reduction in inventory, faster delivery of goods and services to thecustomers.

    In E-business enterprise traditional people organization based on 'Command Control' principle is absent. It isreplaced by people organization that is empowered by information and knowledge to perform their role. They aresupported by information systems, application packages, and decision-support systems. It is no longer functional,product, and project or matrix organization of people but E-organization where people work in networkenvironment as a team or work group in virtual mode. E-business enterprise is more process-driven, Technology

  • 8/9/2019 0031 Assignment

    22/32

    enabled and uses its own information and knowledge to perform. It is lean in number, flat in structure, broad inscope and a learning organization. In E-business enterprise, most of the thingsare electronic, use digitaltechnologies and work on databases, knowledge bases, directories and document repositories. The businessprocesses are conducted through enterprise software like ERP, SCM, and CRM supported by data warehouse,decision support, and knowledge management systems. Today most of the business organizations are using Internettechnology, network, and wireless technology for improving the business performance measured in terms of cost,efficiency, competitiveness and profitability. They are using E-business, Ecommerce solutions to reach farawaylocations to deliver product and services. The enterprise solutions like ERP, SCM, and CRM run on Internet(Internet / Extranet) & Wide Area Network (WAN). The business processes across the organization and outside run

    on E-technology platform using digital technology. Hence today's business firm is also called E-enterprise or Digitalfirm.

    The paradigm shift to E-enterprise has brought four transformations, namely:

    Domestic business to global business. Industrial manufacturing economy to knowledge-based service economy. Enterprise Resource Management to Enterprise Network Management. Manual document driven business process to paperless, automated,Electronically transacted business process.These transformations have made conventional organization design obsolete.

    In E-enterprise, business is conducted electronically. Buyers and sellers through Internet drive the market andInternet-based web systems. Buying and selling is possible on Internet. Books, CDs, computer, white goods andmany such goods are bought and sold on Internet. The new channel of business iswell-known as Ecommerce. Onthe same lines, banking, insurance, healthcare are being managed through Internet E-banking, E-billing, E-audit, &use of Credit cards, Smart card, ATM, E-money are the examples of the Ecommerceapplication. The digital firm,which uses Internet and web technology and uses E-business and Ecommerce solutions, is a reality and is going toincrease in number.

    MIS for E-business is different compared to conventional MS design of an organization. The role of MIS in E-business organization is to deal with changes in global market and enterprises.MIS produces more knowledge-based products. Knowledge management system is formally recognized as a part ofMIS. It is effectively used forstrategic planning for survival and growth, increase in profit and productivityand so on. To achieve the said benefitsof E-business organization, it is necessary to redesign the organization to realize the benefits of digital firm. The

  • 8/9/2019 0031 Assignment

    23/32

    organization structure should be lean and flat. Get rid of rigid established infrastructure such as branch office orzonal office. Allow people to work from anywhere. Automate processes after reengineering the process to cut downprocess cycle time. Make use of groupware technology on Internet platform for faster response processing. Anotherchallenge is to convert domestic process design to work for international process, where integration of multinationalinformation systems using different communication standards, country-specific accounting practices, and laws ofsecurity are to be adhered strictly. Internet and networking technology has thrown another challenge to enlarge thescope of organization where customers and vendors become part of the organization. This technology offers asolution to communicate, coordinate, and collaborate withcustomers, vendors and business partners. This is just not a technical change in

    business operations but a culturalchange in the mindset of managers and workers to look beyond the conventional organization. It means changing

    the organization behaviour to take competitive advantage of the E-business technology.

    The last but not the least important is the challenge to organize and implementinformation architecture andinformation technology platforms, considering multiple locations and multiple information needs arising due toglobal operations of the business into a comprehensive MIS. E-COMMERCE is a second big application next toERP. It is essential deals with buying and selling of goods. With the advent ofintent and web technology, E-Commerce today covers an entire commercial scope online including design and developing, marketing, selling,delivering, servicing, and paying for goods. Some E-Commerce application add order tracking as a feature forcustomer to know the delivery status of the order.

    E-Collaboration helps work effectively on applications like calendaring and scheduling tasks, event, projectmanagement, workflow application, work group application. E-collaboration system

    components are internet,Intranet, Extranet and LAN, WAN networks for communication through GroupWare tools, browser.

    Let us illustrate the model using an event in the business such as receipt of material for a job to be processed on theshop floor. In this event there is a transaction receipt of material, which needs to be processed, and then aworkgroup will use this information of material receipt. Each member of this workgroup has a different goal.

  • 8/9/2019 0031 Assignment

    24/32

    Q2: What are the different emerging fields in MIS? Explain with applications ofyour own for each?

    Answer: Strategic Information System

    A Strategic Information System (SIS) is a system to manage information and assist in strategic decision making. Astrategic information system has been defined as, "The information system to support or change enterprise'sstrategy."

    A SIS is a type of Information System that is aligned with business strategy andstructure. The alignment increases

    the capability to respond faster to environmental changes and thus creates a competitive advantage. An earlyexample was the favourable position afforded American and United Airlines by their reservation systems, Sabre andApollo. For many years these two systems ensured that the two carriers' flights

    appeared on the first screensobserved by travel agents, thus increasing their bookings relative to competitors. A major source of controversysurrounding SIS is their sustainability.

    SISs are different from other comparable systems as:

    1) they change the way the firm competes.

    2) they have an external (outward looking) focus.

    3) they are associated with higher project risk.

    4) they are innovative (and not easily copied).

    It is mainly concerned with providing and organization and its members an assistance to perform the routine tasksefficiently and effectively. One of the major issue before any organization is the challenge of meeting its goals andobjectives. Strategic IS enable such organization in realizing their goals. Strategic Information System (SIS) is asupport to the existing system and helps in achieving a competitive advantage over the organizations competitors interms of its objectives. This unit deals with the critical aspects of the strategic information system. This unitsindicates the theoretical concepts and the way in which the same are realized in

    practice. The flow of the unit is insuch a way that it startswith the development of contemporary theory about strategic uses of corporations' internal information systemsleading to systems which transcend the boundaries of particular organizations. The process whereby strategicinformation systems are created or identified is then examined. A number of weaknesses in the existing body oftheory are identified, and suggestions made as to directions in which knowledgeis or may be progressing. Astrategic information system is concerned with systems which contribute significantly to the achievement of anorganization's overall objectives. The body of knowledge is of recent origin and

    highly dynamic, and the area has anaura of excitement about it. The emergence of the key ideas, the process whereby

  • 8/9/2019 0031 Assignment

    25/32

    strategic information systemscome into being is assessed, areas of weakness are identified, and directions of

    current and future developmentsuggested.

    Information system is regarded as a tool to provide various services to different management functions. The toolshave been developing year by year and the application of the tool has become more and more diverse. Inmanagement it is now a very power means to manage and control various activities

    and decision making process.The original idea of automating mechanical processes got quickly succeeded by the rationalization and integrationof systems. In both of these forms, IS was regarded primarily as anoperational support tool, and secondarily as a service to management. Subsequent

    to the development, it was duringthe last few years that an additional potential was discovered. It was found that, in some cases, informationtechnology (IT) had been critical to the implementation of an organization's str

    ategy. An organization s strategysupported by information system fulfilling its business objectives came to be known as Strategic InformationSystem. The strategic information system consists of functions that involved gathering, maintenance and analysis ofdata concerning internal resources, and intelligence about competitors, suppliers, customers, government and otherrelevant organizations.

    Q3. How is MIS used for decision making in the organisation?

    Answer: Todays managers depend on information systems for decision making. The managers have handful of dataaround them but manually they cannot process the data accurately and with in the

    short period of time available tothem due to heavy competition in modern world. Therefore mangers depend on information systems.

    The concept of MIS:

  • 8/9/2019 0031 Assignment

    26/32

    Management: Management has been defined in a variety of ways, but for our purposes it comprises the process oractivities what managers do in the operation of their organization: Plan, Organize, Initiate and Control operations.

    Information:

    Data are facts and figures that are not currently being used in a decision processes and usually take the form ofhistorical records that are recorded and filed without immediate intent to retrieve for decision making.

    Information consists of data that have been retrieved, processed or otherwise used for information or inferencepurposes, argument, or as a basis for forecasting or decision making.

    System can be described simply as a set of elements joined together for a commonobjective. A subsystem is is part

    of a larger system with which we are concerned. All systems are part of larger systems.

    The objective of an MIS (Management Information System) is to provide information for decision making onplanning, initiating, organizing, and controlling the operations of the subsystems of the form and to provide asynergetic organization in the process.

    Decision Support System: It is sometimes described as the next evolutionary stepafter Management Information

    Systems (MIS) . MIS support decision making in both structured and unstructuredproblem environments.. Itsupports decision making at all levels of the organization .IS (Information Systems) are intended to be woven intothe fabric of the organizations , not standing alone. IS support all aspects ofthe decision making process.MIS aremade of people, computers, procedures, databases, interactive query facilities and so on. They are intended to beevolutionary/adaptive and easy for people to use.

    Methods of Decision Making

    MIS is a technique for making programmed decisions. If we include the computer and management science asintegral parts or tools of computer based information systems, the prospects fora revolution in programmeddecision making are very real. Just as a manufacturing process is becoming moreand more automated so is theautomation of programmed decisions increasing to support this production and other information needs through outthe organization.

    Q5. Difference between intranet and extranet?

    Answer: Extranet: An extranet is a private network that uses the Internet protocols and the publictelecommunication system to securely share part of a business's information or operations with suppliers, vendors,partners, customers, or other businesses. An extranet can be viewed as part of a

    company's intranet that is extended

  • 8/9/2019 0031 Assignment

    27/32

    to users outside the company. An extranet requires security and privacy.

    A new buzzword that refers to an intranet that is partially accessible to authorized outsiders. Whereas an intranetresides behind a firewall and is accessible only to people who are members of the same company or organization, anextranet provides various levels of accessibility to outsiders. You can access an extranet only if you have a validusername and password, and your identity determines which parts of the extranetyou can view.

    An extranet is somewhat very similar to an intranet. Extranets are designed specifically to give external, limitedaccess to certain files of your computer systems to: Certain large or privileged customers. Selected industry partners. Suppliers and subcontractors... etc.

    Therefore, a carefully designed extranet can bring additional business to your company. Intranetsand extranets all have three things in common:

    They both use secured Internet access to the outside world. Both can drastically save your company or organization a lot of money. Both need a user ID & password to control access to the whole system.

  • 8/9/2019 0031 Assignment

    28/32

    The professional development team at My Web Services has the expertise and the right tools to design the rightintranet or extranet that will meet your exact needs, both for today and the future.

    Intranet: An internal use, private network inside an organisation that uses thesame kind of software which wouldalso be found on the Internet. Inter-connected network within one organization that uses Web technologies for thesharing of information internally, not world wide. Such information might include organization policies andprocedures, announcements, or information about new products.

    An intranet is a restricted-access network that works like the Web, but isn't onit. Usually owned

    and managed by a company, an intranet enables a company to share its resources w

    ith its employees withoutconfidential information being made available to everyone with Internet access.A network based on TCP/IPprotocols (an internet) belonging to an organization, usually a corporation, accessible only by the organization'smembers, employees, or others with authorization. An intranet's Web sites look and act just like any other Websites, but the firewall surrounding an intranet fends off unauthorized access. Like the Internet itself, intranets areused to share information.

    An intranet is an information portal designed specifically for the internal communications of small,medium or large businesses, enterprises, governments, industries or financial institutions of any size or complexity.Intranets can be custom-designed to fit the exact needs of businesses no matterwhere they are situated. Users ofintranets consists mainly of:

    Members of the executive team. Accounting and order billing. Managers and directors. Sales people and support staff. Customer service, help desk, etc.

    Q6. Explain the control issues in management information systems?

    Answer: A management control systems (MCS) is a system which gathers and uses information to evaluate theperformance of different organizational resources like human, physical, financial and also the organization as awhole considering the organizational strategies. Finally, MCS influences the behavior of organizational resourcesto implement organizational strategies. MCS might be formal or informal. The term management control wasgiven of its current connotations by Robert N. Anthony (Otley, 1994).

    According to Maciariello et al. (1994), management control is concerned with coo

  • 8/9/2019 0031 Assignment

    29/32

    rdination, resource allocation,motivation, and performance measurement. The practice of management control andthe design of managementcontrol systems draws upon a number of academic disciplines. Management controlinvolves extensivemeasurement and it is therefore related to and requires contributions from accounting especially managementaccounting. Second, it involves resource allocation decisions and is therefore related to and requires contributionfrom economics especially managerial economics. Third, it involves communication, and motivation which meansit is related to and must draw contributions from social psychology especially organizational behavior

    Management control systems use many techniques such as

    Balanced scorecard: The balanced scorecard (BSC) is a strategic performance mana

    gement tool -a semi-standard structured report supported by proven design methods and automation tools that can be used bymanagers to keep track of the execution of activities by staff within their control and monitor theconsequences arising from these actions.

  • 8/9/2019 0031 Assignment

    30/32

    Total quality management (TQM): Total Quality Management (or TQM) is a management conceptcoined by W. Edwards Deming. The basis of TQM is to reduce the errors produced during themanufacturing or service process, increase customer satisfaction, streamline supply chain management,aim for modernization of equipment and ensure workers have the highest level oftraining. One of theprincipal aims of TQM is to limit errors to 1 per 1 million units produced. Total Quality Management isoften associated with the development, deployment, and maintenance of organizational systems that arerequired for various business processes.

    Kaizen (Continuous Improvement): Kaizen (Japanese for "improvement" or "change for the better")refers to a philosophy or practices that focus upon continuous improvement of pr

    ocesses inmanufacturing, engineering, supporting business processes, and management. It has been applied inhealthcare, government, banking, and many other industries.

    Activity-based costing: Activity-based costing (ABC) is a costing model that identifies activities in anorganization and assigns the cost of each activity resource to all products andservices according to theactual consumption by each: it assigns more indirect costs (overhead) into direct costs. In this way anorganization can precisely estimate the cost of its individual products and services for the purposes ofidentifying and eliminating those which are unprofitable and lowering the prices

    of those which areoverpriced.

    Target costing: Target costing is a pricing method used by firms. It is definedas "a cost management toolfor reducing the overall cost of a product over its entire life-cycle with the help of production,engineering, research and design". A target cost is the maximum amount of cost that can be incurred on aproduct and with it the firm can still earn the required profit margin from that

    product at a particularselling price.

    Benchmarking and Benchtrending: Benchmarking is the process of comparing one's business processesand performance metrics to industry bests and/or best practices from other industries. Dimensionstypically measured are quality, time, and cost. Improvements from learning meandoing things better,faster, and cheaper.

    JIT: JIT may refer to:.Various meanings of Just In Time:.Just-in-time compilation -a technique for improving the performance of virtual machines

  • 8/9/2019 0031 Assignment

    31/32

    in computing..Just-in-time (business) - a business inventory strategy.

    Budgeting: A budget (from old French bougette, purse) is generally a list of all

    planned expenses andrevenues. It is a plan for saving and spending.[1] A budget is an important concept in microeconomics,which uses a budget line to illustrate the trade-offs between two or more goods.

    In other terms, a budgetis an organizational plan stated in monetary terms.

    Capital budgeting : Capital budgeting (or investment appraisal) is the planningprocess used to determinewhether a firm's long term investments such as new machinery, replacement machinery, new plants, newproducts, and research development projects are worth pursuing. It is budget for

    major capital, orinvestment, expenditures

    Program management techniques, etc.

  • 8/9/2019 0031 Assignment

    32/32


Recommended