8/11/2019 00_Introduction to Parameter Planning

1/10

1 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Introduction to Parameter Planning

BSSPAR

Module 00

8/11/2019 00_Introduction to Parameter Planning

2/10

2 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Legal Notice

Intellectual Property Rights

All copyrights and intellectual property rights for Nokia training documentation,

product documentation and slide presentation material, all of which are forthwithknown as Nokia training material, are the exclusive property of Nokia. Nokia ownsthe rights to copying, modification, translation, adaptation or derivatives includingany improvements or developments. Nokia has the sole right to copy, distribute,

amend, modify, develop, license, sublicense, sell, transfer and assign the Nokiatraining material.

Individuals can use the Nokia training material for their own personal self-

development only, those same individuals cannot subsequently pass on that sameIntellectual Property to others without the prior written agreement of Nokia.

The Nokia training material cannot be used outside of an agreed Nokia trainingsession for development of groups without the prior written agreement of Nokia.

8/11/2019 00_Introduction to Parameter Planning

3/10

3 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Module Objectives

At the end of the module, the participant will be able to:

Sketch a BSS Managed Object Hierarchy

Look up the parameters at each level, in a parameter dictionary Identify parameter value ranges and default settings

Find the changes to objects and parameters, that occur with each BSS softwarerelease

Introductionto Parameter

Planning

8/11/2019 00_Introduction to Parameter Planning

4/10

4 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Managed Object Hierarchy

ADJC FHS

RTSL

TRX HOC POC

BTS

HW-DB

BTS-SW

BCFMABA

BSC

Introductionto Parameter

Planning

Segmen

t!

8/11/2019 00_Introduction to Parameter Planning

5/10

5 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Example of a BSC Level ParameterIntroductionto ParameterPlanning

8/11/2019 00_Introduction to Parameter Planning

6/10

6 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Example of a BCF Level ParameterIntroductionto ParameterPlanning

8/11/2019 00_Introduction to Parameter Planning

7/10

7 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Example of a BTS Level ParameterIntroductionto ParameterPlanning

8/11/2019 00_Introduction to Parameter Planning

8/10

8 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Example from theBSS and NSS RNW Par. Dictionary

Introductionto Parameter

Planning

8/11/2019 00_Introduction to Parameter Planning

9/10

9 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

Example of a Summary of ChangesIntroductionto ParameterPlanning

8/11/2019 00_Introduction to Parameter Planning

10/10

10 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA

MOC Call Phases

MS BTS BSC

AUTHENTICATION (SDCCH)Phase 2 : MM signalling

CIPHERING MODE (SDCCH)Phase 8 : Ciphering

TMSI REALLOCATION (SDCCH)

SETUP (SDCCH)

Phase 2 : MM signalling

CH. REQUEST (RACH)

IMMEDIATE ASSIGN(AGCH)

SERVICE REQUEST (SDCCH)

Phase 1 : Paging, initial MS

CH.RELEASEPhase 4 : Release

ALERTING & CONNECT (FACCH)Phase 2 : MM signalling

CONN. ACK. and MEASUREMENTPhase 15 : Conversation

DISCONNECT & RELEASE (FACCH) Phase 4 : Release

ASSIGNMENT (SDCCH-FACCH)Phase 3 : Basic assignment

Introductionto Parameter

Planning