+ All Categories
Home > Documents > 01 - Needle Valves - Lume · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156...

01 - Needle Valves - Lume · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156...

Date post: 06-Feb-2018
Category:
Upload: trinhkhue
View: 228 times
Download: 4 times
Share this document with a friend
14
NEEDLE VALVES 01
Transcript
Page 1: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

NEEDLE VALVES 01

Page 2: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Color Coded Dust Cap Outside screwed bonnet

For stem threaded protection Bonnet characteristics

ISOLATE

DRAIN

EQUALIZE

Temperature

1

Padlock on request 3

Padlock on request

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 2

5) Gland adjuster for in service adjustment

VALVE HEAD UNITS

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

3) Thrust bush

6) Bonnet body

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

M6 Screws

Bonnet with Locking Plate Design

This design allows minimum handle

movements and is ideal as

protection against unauthorized

closing of the valve.

Anti-tamper Extends for stem

The Anti-Tamper handle reduce

the risk of uman error and

deliberate tampering. The valve

can be operated with the Anti-

Tamper key provided separately.

SLEEVE

2

50 mm length

100 mm length

150 mm length

on request length

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 3: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Dimension (mm)

Model

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 3

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

Body Packing Packing

Shell Seat Seat

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V100-108N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V100-106N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V100-104N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L

01V100-068N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V100-066N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L

01V100-064N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

6000 PSI (413 bar) 4 mm

30 74,5

1" 75 50 84,5

Ordering Number In Out Drain Packing Material Rating Orifice

NEEDLE VALVES 01V100 - SeriesFLOW CHART

A B C

01V110 Male / Female 01V120 Male / Male

1/2" 60 30 74,5

3/4" 65 40 79,5

1/4" 60 30 74,5

3/8" 60

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 4: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Dimension (mm)

Model

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 4

NEEDLE VALVES 01V110 - SeriesFLOW CHART

A B C

1/2" 65 30 74,5

3/4" 70 40 79,5

1/4" 65 30 74,5

3/8" 65 30 74,5

1" 80 50 84,5

Ordering Number In Out Drain Packing Material Rating Orifice

01V110-064N4N4AT 1/4" NPT-M 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

6000 PSI (413 bar) 4 mm

01V110-068N8N4AT 1/2" NPT-M 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V110-066N6N4AT 3/8" NPT-M 3/8" NPT-F N/A PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V110-106N6N4AT 3/8" NPT-M 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V110-104N4N4AT 1/4" NPT-M 1/4" NPT-F N/A PTFE SS 316/316L

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V110-108N8N4AT 1/2" NPT-M 1/2" NPT-F N/A PTFE SS 316/316L

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

Body Packing Packing 01V100 Female / Female 01V120 Male / Male

Shell Seat Seat

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 5: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Dimension (mm)

Model

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 5

NEEDLE VALVES 01V120 - SeriesFLOW CHART

A B C

1/2" 70 30 74,5

3/4" 82 40 79,5

1/4" 70 30 74,5

3/8" 70 30 74,5

1" 90 50 84,5

Ordering Number In Out Drain Packing Material Rating Orifice

01V120-064N4N4AT 1/4" NPT-M 1/4" NPT-M N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

6000 PSI (413 bar) 4 mm

01V120-068N8N4AT 1/2" NPT-M 1/2" NPT-M N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V120-066N6N4AT 3/8" NPT-M 3/8" NPT-M N/A PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V120-106N6N4AT 3/8" NPT-M 3/8" NPT-M N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V120-104N4N4AT 1/4" NPT-M 1/4" NPT-M N/A PTFE SS 316/316L

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V120-108N8N4AT 1/2" NPT-M 1/2" NPT-M N/A PTFE SS 316/316L

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

Body Packing Packing 01V100 Female / Female 01V110 Male / Female

Shell Seat Seat

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 6: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Dimension (mm)

Model

Included accessories

No. 1 Plug 1/4" NPT-M

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 6

NEEDLE VALVES 01V130 - Series

A B C

FLOW CHART

1/2" 70 30 74,5

3/4" 75 40 79,5

1/4" 70 30 74,5

3/8" 70 30 74,5

1" 85 50 84,5

Ordering Number In Out Drain Packing Material Rating Orifice

01V130-064N4N4AT 1/4" NPT-F 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

6000 PSI (413 bar) 4 mm

01V130-068N8N4AT 1/2" NPT-F 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V130-066N6N4AT 3/8" NPT-F 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V130-106N6N4AT 3/8" NPT-F 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V130-104N4N4AT 1/4" NPT-F 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V130-108N8N4AT 1/2" NPT-F 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

Body Packing Packing 01V140 Male / Female

Shell Seat Seat

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 7: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Dimension (mm)

Model

Included accessories

No. 1 Plug 1/4" NPT-M

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 7

NEEDLE VALVES 01V140 - SeriesFLOW CHART

A B C

1/2" 75 30 74,5

3/4" 80 40 79,5

1/4" 75 30 74,5

3/8" 75 30 74,5

1" 90 50 84,5

Ordering Number In Out Drain Packing Material Rating Orifice

01V140-064N4N4AT 1/4" NPT-M 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

6000 PSI (413 bar) 4 mm

01V140-068N8N4AT 1/2" NPT-M 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V140-066N6N4AT 3/8" NPT-M 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V140-106N6N4AT 3/8" NPT-M 3/8" NPT-F 1/4" NPT-F PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V140-104N4N4AT 1/4" NPT-M 1/4" NPT-F 1/4" NPT-F PTFE SS 316/316L

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V140-108N8N4AT 1/2" NPT-M 1/2" NPT-F 1/4" NPT-F PTFE SS 316/316L

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

Body Packing Packing 01V130 Male / Female

Shell Seat Seat

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 8: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 8

NEEDLE VALVES 01V150 - SeriesFLOW CHART

Ordering Number In Out Drain Packing Material Rating Orifice

01V150-064N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

6000 PSI (413 bar) 4 mm

01V150-068N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V150-066N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V150-106N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V150-104N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V150-108N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

Body Packing Packing 01V160 Male / Female

Shell Seat Seat

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 9: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Technical specifications:

Optional: Packing Graphoil

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 9

NEEDLE VALVES 01V160 - SeriesFLOW CHART

Rating Orifice

01V150-064N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

Ordering Number In Out Drain Packing Material

6000 PSI (413 bar) 4 mm

01V150-068N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L 6000 PSI (413 bar) 4 mm

01V150-066N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L

10000 PSI (690 bar) 4 mm

01V150-106N6N4AT 3/8" NPT-F 3/8" NPT-F N/A PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V150-104N4N4AT 1/4" NPT-F 1/4" NPT-F N/A PTFE SS 316/316L

ISOLATE

3) Thrust bush

5) Gland adjuster for in service adjustment

6) Bonnet body

10000 PSI (690 bar) 4 mm

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

01V150-108N8N4AT 1/2" NPT-F 1/2" NPT-F N/A PTFE SS 316/316L

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

Hydraulics Air

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

Body Packing Packing 01V150 Female / Female

Shell Seat Seat

620 9000 414 6000 7 100

Bar PSI Bar PSI Bar PSI

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 10: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Optionals on request

Optional: Packing Graphoil

Technical specifications:

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 10

SS 316/316L

MULTIPORT NEEDLE VALVE

01V170-068N8NAT 1/2" NPT-M 3 x 1/2" NPT-F PTFE

6) Bonnet body

01V170 - Series

Ordering Number In Out Packing Material Rating Orifice

1/2" NPT-M - SS316L

Model

FLOW CHART

BP-N4SS 1/4" NPT-M - SS316L

BP-N8SS

5)

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°C

Gland adjuster for in service adjustment

Hydraulics Air

Body Packing Packing

Shell Seat Seat

01V180 - Female / Female

Bar PSI Bar PSI Bar

620 9000 414 6000 7

PSI

100

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

11) Fixing

ISOLATE

Thrust bush3)

Vertical Mounting Horizontal MountingHorizontal Mounting

10000 PSI (690 bar) 4 mm1/2" NPT-M 3 x 1/2" NPT-F PTFE SS 316/316L

6000 PSI (413 bar) 4 mm

01V170-108N8NAT

Bleeder

EX Plug Model

Code Size/Material

PM-N4SS 1/4" NPT-M - SS316L

PM-N8SS 1/2" NPT-M - SS316L

Code Size/Material

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 11: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Optionals on request

Optional: Packing Graphoil

Technical specifications:

Color Coded Dust Cap Outside screwed bonnet Bonnet characteristics

For stem threaded protection

Temperature

Inspections API 598

Different versions

Certificates

Uni EN 10204 type 3.1

NACE MR 01.75 / ISO 15156

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 11

Code Size/Material

BP-N4SS 1/4" NPT-M - SS316L

BP-N8SS 1/2" NPT-M - SS316L

MULTIPORT NEEDLE VALVE 01V180 - SeriesFLOW CHART

Bleeder Model

EX Plug Model

Code Size/Material

PM-N4SS 1/4" NPT-M - SS316L

PM-N8SS 1/2" NPT-M - SS316L

Ordering Number In Out Packing Material Rating Orifice

4 mm

01V180-108N8NAT 1/2" NPT-F 3 x 1/2" NPT-F PTFE SS 316/316L 10000 PSI (690 bar) 4 mm

01V180-068N8NAT 1/2" NPT-F 3 x 1/2" NPT-F PTFE SS 316/316L 6000 PSI (413 bar)

3) Thrust bush

Vertical Mounting Horizontal Mounting Horizontal Mounting

1-4)

Stem actuator (1) and separate lower stem (4) ( needle ) fixed

type, two-piece system permits the advancement shutter

without rotation of spindle. This leads to a better seal and

long lifetime. Both spindles incorporated back stop design

2)

PTFE adjustable packing installed below operating threads to

prevent medium contamination or lubrificant washout of

operating threads. Max temperature 180°C. Graphoil as

option. Max temp. 620°CISOLATE

5) Gland adjuster for in service adjustment

6) Bonnet body

7) Locking nut

8) T bar handle for low torque operation

9)Dust cap with colour coded function label prevents ingress of

contaminants to operating thread

10)Bonnet locking pin to prevent detatchment of the bonnet

from the body

Seat

11) Fixing

Hydraulics Air

Body Packing Packing 01V170 - Male / Female

Bar PSI Bar PSI Bar PSI

620 9000 414 6000 7 100

Shell Seat

0

2000

4000

6000

8000

10000

12000

0 50 100 125 150 175 200 225 230

Pre

ssu

re P

SI

Temperature °C

RTFE and PTFE

RTFE

PTFE

Page 12: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle valves and Manifolds

02V - 4 N 8 N 2 A T

SERIES

NEEDLE VALVETWO VALVE MANIFOLDSTHREE VALVE MANIFOLDSFOUR VALVE MANIFOLDSFIVE VALVE MANIFOLDSSIX VALVE DISTRIBUTOREIGHT VALVE DISTRIBUTORTEN VALVE DISTRIBUTOR

MODEL AS CATALOGUEAS CATALOGUEAS CATALOGUEAS CATALOGUEAS CATALOGUE

RATINGS3000 PSI (207 bar)6000 PSI (413 bar)10000 PSI (690 bar)

IN1/8" 3/4"1/4" 1"3/8" Flanged 1/2" M20

IN TYYPENPT IEC 61518/ABSPT IEC 61518/BBSPP METRIC

OUT

1/8" 3/4"1/4" 1"3/8" Flanged IEC 615181/2" M20

OUT TYYPENPT IEC 61518/ABSPT IEC 61518/BBSPP METRIC

VENT/DRAIN

1/8" NPT-F1/4" NPT-F1/2" NPT-F

MATERIAL

Aisi 316L (standard) ALLOYl 625Carbon Steel ALLOY 825 Aisi 316 Ti TITANIUM GR.2ALLOY 400 ASTM A350 LF2ASTM A182 F51 Duplex ASTM A182 F44ASTM A182 F53 S.Duplex ASTM A105ASTM A182 F55 S.Duplex 6M0/1.4547ALLOY C276 ASTM B148

PACKINGPTFE (TEFLON)GRAPHOIL

OPTIONALS

ALL COMPONENTS 316L LOCKING DEVICEPRIVATE LABEL S STANDARDLOX CLEANING M MINIANTITAMPER (DRAIN) E EXTENDEDANTITAMPER (ISOLATE) G GAS SOLUTIONANTITAMPER (EQUALISE) W WC TIP

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 12

10V

ORDERING INFORMATIONS100 06 -

01V02V03V04V05V06V08V

4 16

100-199200-299300-399400-499500-599

030610

2 10

6 FL8 M2

N AT BP M

2 104 166 FL8 M2

N AT BP M

246

A IB LC M

G

D NE OF PG QH R

T

TE

6L LDLALCTDTI

Page 13: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

Group Instrumentation Products Family Needle

Connections Chemical resistance of materials

01 - Threaded connections

A A A A A A A A B

01 - Welded connections X B A A A A A A X

A A A A A A A A A

C B A A A A A A A

A A A A A A A A A

A A A A A A A A A

C A A A A A C A A

A A A A A A A A B

A A A A A A A A B

A A A A A A A A B

C A A A A A A A B

A A A A A A A A A

A A A A A A A X X

Certifications

Dimensions are for reference only, and are subject to change without notice

www.lumeinternational.com 13

METHANOL

SOUR GAS

MINERAL OIL

STEAM

SEA WATER

COMPR.AIR

NITROGEN

CRUDE OIL

NATURAL GAS

GLYCOL

PE

EK

De

rlin

Body material Seats

SS

31

6/3

16

L

DU

PLE

X

MO

NE

L 4

00

Inco

loy

82

5

Ha

ste

llo

y C

27

6

PT

FE

Plain End

Connections where leakages are

not allowed. Easy to check.

Connections with SW. Not critical

applications.

Connections with PE. Not critical

applications.

CA

RB

ON

ST

EE

L

CHEMICAL AGENT

ACETONE

SULFORIC ACID

HOT WATER

the plain end is supplied with a flat end pipe

to be inserted into the socket.

BW

But Weld

• BSPP: BS21 – ISO 7/1 Rp – ISO 228 G

SW

Socket Weld

PE

ASME B16.25 butt weld; easy to check by radiography

ASME B16.11. socket weld

This connection is available up to 2”

• SW (Socket weld):

• PE (Plain ends):

The connections are welded to the pipe with edge welding. This

coupling type is used in applications where there must not be losses in

the atmosphere or dismounting is not frequent.

Different schedule can be supplied upon request.

• BW (Butt weld):

NPT Connections BS connections

In threaded parallel joints (BSPP), sealing is performed by a PTFE seal

placed on the bottom of the coupling or by an OR positioned out of the

thread.

In the cone-shaped threaded joints (for example NPT/BSPT), the seal is

on the thread and is improved by applying glue or Teflon strip.

TECHNICAL DATA

The following is the table that lists the compatibility of materials with

different fluids.

The table is based on LUME practice and applications with our valves in

accordance with the value set by the ASME/ASTM/ANSI/API standards.

These indications are given by technical publications and can be considered

as a guide for selecting the materials but these indications do not

guarantee the correct application of our products or their suitability to

particular uses.

The client is responsible for the choice of a material suitable to the

application.

A = Excellent

B = good

C = poor

X = unsatisfactory

LUME needle valves can be made with different types of connections,

which can even be combined to one another.

The following couplings are available and come in either male or female

connections:

• NPT: ASME B1.20.1;

• BSPT: BS21 – ISO 7/1 Rc

• Origin material certificates, EN10204 3.1/3.2

• NACE MR 01.75/01.03

• Lox Cleaning

The standard certification package includes:

• EN10204 3.1 Pressure Test Certificate

• EN10204 3.1 Material Certificate;

• Drawings

Besides the certificates listed above, the following documents can be

issued:

Page 14: 01 - Needle Valves - Lume  · PDF file01 NEEDLE VALVES . ... NACE MR 01.75 / ISO 15156 Dimensions are for reference only, and are subject to change without notice   3

www.valve-manifolds.com

www.highpressurevalves.it

www.highpressuretubings.com

www.valve-shopping.com

CUSTOMER SATISFACTION

INNOVATION, SERVICE,

Innovation means understanding how things can be done differently, putting aside the way it

has always been done as innovation expresses the constant desire to improve.

Quality comes from professionalism and the attention to create a successful business.

Innovation is strictly connected to quality: these two words represent the goals we aim for; they

challenge us to create a relationship and a connection among all parties. Lume wants to

represent the link between the clients and the producers in order to solve issues and provide a

high level of service and customer satisfaction.

LUME INTERNATIONAL srl - Viale Mazzini, 41 - 35031 ABANO TERME (PD) - Italia Tel. +39 049 8630386 - Fax. +39 049 8638304

[email protected] - www.lumeinternational.com


Recommended