WWW.SDCSECURITY.COM SECURITY DOOR CONTROLS

Security Door ControlsACCESS & EGRESS SOLUTIONS - THE LOCK BEHIND THE SYSTEM 1

Communicating Bathroom PackagePre-specd so you dont have to. One part number covers it all, whether youre looking for a mortise, cylindrical, or electromagnetic locking system. Each Shared Bathroom Package is complete with everything needed to ensure privacy and coordinate emergency access to a common bathroom facility from adjoining rooms in hospitals, long term care facilities, schools and dormitories.

(2) Electrified Locking Devices (Mortise, Cylindrical or ElectroMagnetic)

(1) 1.5 Amp Power Supply with Universal Relay Module (631RFXUR1)

(2) Emergency Access Push Button Switches (CB400-B)

(1) System Activation Push Button Switch (CB400-A)

(2) Build-in Latch or Door Position Status Sensors (DPS , L)

(2) Power Transfer Hinges* *(not required for EMLocks) (PTH)

PACKAGE COMPONENTS:

MODELS

CBP-ME-78 includes Eclipse style mortise locks (Z7850LQDE)

CBP-MG-78 includes Galaxy style mortise locks Z7850LQDG)

MORTISE LOCK OPTION:

CB400-A Series

CB400-B Series

WARRANT

Y

YEAR5

CBP-CE-72 includes Eclipse style cylindrical locks (Z7250EQ)

CBP-CG-72 includes Galaxy style cylindrical locks (Z7250GQ)

CYLINDRICAL LOCK OPTION:

CBP-EM-81 includes EMLock locking devices 650lb (1581VD)

CBP-EM-71 includes EMLock locking devices 1200lb (1571VD)

CBP-EM-11 includes EMLock locking devices 1650lb (1511VD)

ELECTRO MAGNETIC OPTION:

Every Shared Bathroom Package also includes a Riser Diagram, Components List, Method of Operation and Wiring Diagram to help you determine the materials and installation costs to complete your project bid.

2017 SECURITY DOOR CONTROLS WWW.SDCSECURITY.COM

Security Door Controls

LIT-CBP COMMUNICATING BATHROOM PACKAGE 08/17

[t] 800.413.8783 805.494.0622 [f] 866.215.3138 801 Avenida Acaso, Camarillo, CA 93012 PO Box 3670, Camarillo, CA 93011

APPLICATION

Z7850 x DPS Electrified Mortise Lock with Door Status

631RFXUR-1 1.5 Amp, 12/24 VDC Class 2 Output Power Supply w/Comm. Bath Control Module

402-B Emergency Release Button

PTH Power Transfer Hinge

1581 x DPS EMLock 650lb1571 x DPS EMLock 1200lb1511 x DPS EMLock 1650lb

Z7250 Electrified Cylindrical Lock with Latch Status

PTH Power Transfer Hinge

402-A System Activation Button

631RFXUR-1 1.5 Amp, 12/24 VDC Class 2 Output Power Supply w/Comm. Bath Control Module

402-B Emergency Release Button

402-A System Activation Button

631RFXUR-1 1.5 Amp, 12/24 VDC Class 2 Output Power Supply w/Comm. Bath Control Module

401-B Emergency Release Button

401-A System Activation Button

C NO C NO - NO C NC - NO C NC

- +

TRIG A TRIG B RELAY A RELAY B

w

DA

w

DB

J1

UR-1

PWR

PROJECT NAME:

DIST.: DWG. NO.:DRAWN BY: DATE:LOCATION.: CONTACT:

SO NO.: REVTITLE:-801 Avenida Acaso

Camarillo, CA 93012t 805.494.0622 ~ f 805.494.8861

www.sdcsecurity.com

--

--

2-Door Communicating Bath System Electrified Cylindrical Solution

- service@sdcsecurity.com --06/17Page 1 of 3

-

2017 Security Door Controls Printed in U.S.A

Door 1

Door 2

EMERGENCY

RELEASE

PUSHTO UNLOCK DOOR

CB402-B

(OUTSIDE DOOR 2)

CB402-A

ACTIVATION

BUTTON

SWITCH

(INSIDE)

C

N/CN/O

YEL

WHT

C

N/CN/O

YEL

WHT

BATHROOM LOCKBOTH DOORS MUST BE

CLOSED TO LOCK

LIGHT ON DOOR LOCKED

PUSH TO LOCK

EMERGENCY

RELEASE

PUSHTO UNLOCK DOOR

CB402-B

(OUTSIDE DOOR 1)

C

N/CN/O

YEL

WHT

RED

RED

LAMP

RED

RED

LAMP

ROCKER SWITCH SETTINGS:

SWITCH #1 IS ON

ALL OTHER SWITCHES OFF

WET/DRY SELECTION JUMPERS:

Both A & B set to WET

WET

DRY

RED

RED

LAMP

Method of Operation:

Both doors are normally closed and unlocked.

System Activation:

Upon entering the bathroom and closing both doors,

momentarily pressing the Activation Button will lock both

doors and turn ON the indicator lamps on the Activation

and Emergency Release Buttons, indicating the system

is active.

System Deactivation:

Operating the inside lever to retract the latch on either

door will unlock both doors and turn off all indicator

lamps. Using a key override from the outside to enter

either door will also reset the system and unlock both

doors.

Emergency Override:

Momentarily pressing either Emergency Release Button

located outside each door will immediately unlock both

doors and reset the system.

CBP-C Series System Components:

(1) 631RFXUR1 1A Power Supply w/

Comm. Bath Controller

(1) CB402-A Activation Button

(2) CB402-B Emergency Release Button

(2) Z7250EQ or Z7250GQ Electrified

Cylindrical Lock, Eclipse or Galaxy Lever

(2) PTH-4Q 4.5"x4.5" Power Transfer

Hinge

Battery

Charger

Indicator Fuse

AC Power

LED

Primary

Fuse 250V

1.5AmpBattery

Input

System Status

LED

G W B

TO 120VAC PRIMARY

VOLTAGE CONNECTION

(Remove factory installed jumper only

when fire alarm interface is used)

+

-

DC Voltage

Output

Terminals+ - C

12V

S

H

O

R

T

O

P

E

N24V

VOLTAGE

SELECT

Note:

SET TO 24VDC.

Power must be turned

off before changing

voltage jumper631RF

NOTE: ALL WIRING MUST BE REVIEWED AND APPROVED BY THE

PROJECT ENGINEER ASSIGNED TO THE LOCATION FOR ITS

CORRECTNESS AND SUITABILITY FOR THE APPLICATION IN THE

WHICH THE EQUIPMENT IS INSTALLED AND OPERATED. ALL

WIRING MUST CONFORM TO NATIONAL, STATE, AND LOCAL CODES

FOR CLASS 2 FIRE PROTECTION AND CONTROL DEVICES.

22/4C

AC

Mains

(3) COND

18/4C

22/4C

18/4C

Z7250EQ/GQ

Electrified Cylindrical Lock

(Fail-Safe)

Z7250EQ/GQ

Electrified Cylindrical Lock

(Fail-Safe)

631RF

Power

Supply

x UR-1

PTH-4Q

Power

Transfer

Hinge

PTH-4Q

Power

Transfer

Hinge

CB402-A

Activation

Button

CB402-B

Emergency

Release

(Outside)

CB402-B

Emergency

Release

(Outside)

Door #1 Door #2

22/4C

C NO C NO - NO C NC - NO C NC

- +

TRIG A TRIG B RELAY A RELAY B

w

DA

w

DB

J1

UR-1

PWR

PROJECT NAME:

DIST.: DWG. NO.:DRAWN BY: DATE:LOCATION.: CONTACT:

SO NO.: REVTITLE:-801 Avenida Acaso

Camarillo, CA 93012t 805.494.0622 ~ f 805.494.8861

www.sdcsecurity.com

--

--

2-Door Communicating Bath System Electrified Mortise Solution

- service@sdcsecurity.com --06/17Page 2 of 3

-

2017 Security Door Controls Printed in U.S.A

Door 1

Door 2

EMERGENCY

RELEASE

PUSHTO UNLOCK DOOR

CB402-B

(OUTSIDE DOOR 2)

CB402-A

ACTIVATION

BUTTON

SWITCH

(INSIDE)

C

N/CN/O

YEL

WHT

C

N/CN/O

YEL

WHT

BATHROOM LOCKBOTH DOORS MUST BE

CLOSED TO LOCK

LIGHT ON DOOR LOCKED

PUSH TO LOCK

EMERGENCY

RELEASE

PUSHTO UNLOCK DOOR

CB402-B

(OUTSIDE DOOR 1)

C

N/CN/O

YEL

WHT

RED

RED

LAMP

RED

RED

LAMP

ROCKER SWITCH SETTINGS:

SWITCH #1 IS ON

ALL OTHER SWITCHES OFF

WET/DRY SELECTION JUMPERS:

Both A & B set to WET

WET

DRY

RED

RED

LAMP

Method of Operation:

Both doors are normally closed and unlocked.

System Activation:

Upon entering the bathroom and closing both doors,

momentarily pressing the Activation Button will lock both

doors and turn ON the indicator lamps on the Activation

and Emergency Release Buttons, indicating the system

is active.

System Deactivation:

Operating the inside lever & opening either door will

unlock both doors and turn off all indicator lamps. Using

a key override from the outside to enter either door will

also reset the system and unlock both doors.

Emergency Override:

Momentarily pressing either Emergency Release Button

located outside each door will immediately unlock both

doors and reset the system.

CBP-M Series System Components:

(1) 631RFXUR1 1A Power Supply w/

Comm. Bath Controller

(1) CB402-A Activation Button

(2) CB402-B Emergency Release Button

(2) Z7850LQDE or Z7850LQDG

Electrified Mortise Lock w/ DPS, Eclipse or

Galaxy Lever

(2) PTH-4Q 4.5"x4.5" Power Transfer

Hinge

Battery

Charger

Indicator Fuse

AC Power

LED

Primary

Fuse 250V

1.5AmpBattery

Input

System Status

LED

G W B

TO 120VAC PRIMARY

VOLTAGE CONNECTION

(Remove factory installed jumper only

when fire alarm interface is used)

+

-

DC Voltage

Output

Terminals+ - C

12V

S

H

O

R

T

O

P

E

N24V

VOLTAGE

SELECT