02 LOGIC PLUS - RS Components · 2019. 10. 12. · k1816 whi k1826 whi k1800 whi k1257 whi...

Logic Plus18

WHITE www.mkelectric.co.uk

Logic Plus wiring devices from MK Electric have been designed to perfectly complement modern

interiors, offering an unobtrusive and sophisticated look totally in keeping with today’s design.

Technically, they exceed British Standard requirements with patented features that make these

products the most advanced and safest available.

They are easy to install and available through our extensive distributor network.

The range is backed by MK’s quality and reliability and provides the largest selection of wiring devices

in any single range.

Modern stylingSmoothly formed front plates, rounded rocker switches and chamfered radius corners

Total safetyUnique 3-pin operated “child resistant shutter system”, which is designed to inhibit access to the electricitysupply, unless all 3 pins of a standard British 13 Amp plug are in position

Unrivaled quality and reliabilityProducts are made from the very best materials and are 100% tested

Quick and easy to installIn-line terminals and backed out, captive screws feature

Outstanding rangeLarge selection of wiring devices providing a total solution

20 year guaranteeGives total peace of mind to you and your customers (10 years Electronic Devices)

19Logic Plus

TECHNICAL HOTLINE +44 (0)1268 563720 WHITE

Simple but effective screwless cord grip

on connection units – securely holds the

cable

Combined TV, FM, satellite and

telephone sockets save on installation

time and space

TERMINAL SCREWS

Backed out and held captive within

the terminal housing

IN-LINE TERMINALS

Allow wire to be cut stripped to the same length

FUNNEL ENTRANCE TO TERMINALS

Terminals are upwards facing to make

installation easier

TERMINAL MARKINGS

Clearly marked on all

rear mouldings

Outboard rockers on switchsockets

reduce the likelihood of accidentally

switching appliances on or off

TASTEFUL WHITE, HIGH GLOSS, HIGH QUALITY

THERMOSET MATERIAL

Maintains appearance and resists scratching

DOUBLE POLE SWITCHING

Switches both live and neutral (neutral makes first, breaks

last) means added safety for the user

OPTIONAL NEON INDICATOR SHOWS

WHEN SWITCH IS ON

3mm SWITCH CONTACT GAP

CONTOURED TO

BLEND INTO THE

WALL

UNIQUE 3-PIN “CHILD

RESISTANT SHUTTER SYSTEM”

Designed to inhibit access to the

electricity supply, unless all 3 pins of

a standard British 13 Amp plug are in

position (see note on opposite page

for related products)

DUAL EARTH TERMINALS

Available for installations that require

high integrity earthing

SpecificationNotes

The unique 3 pinoperated safety shuttermakes Logic Plussockets the safestavailable

Terminals are groupedin-line with terminalscrews backed outready for easy wiring.Clear marking on darkbackground makes theterminals easilyidentifiable

All products areguaranteed for 20years (10 years formains operatedelectronic devices)

Many sockets arefitted with two earthterminals to providehigh integrity earthing

The 3 gangswitchsocket providesextra outlet options inthe home and office

Frontplates arechamfered at the topwith radiused corners

SwitchsocketOutlets

13 AMPFLUSH

MOUNTING BOXESFLUSH: 25mm 1 GANG: 861 ZIC 2 GANG: 862 ZIC 3 GANG: K863 FLUSH: 35mm (forextra wiring space)1 GANG: 866 ZIC 2 GANG: 886 ZICSURFACE1 GANG: K2140 WHI2 GANG: K2142 WHI3 GANG: K2153 WHI

DIMENSIONS:1 gang: 86 x 86mm2 gang: 86 x 146mm3 gang: 86 x 206mmFIXING CENTRES:1 gang: 60.3mm2 gang: 120.6mm3 gang: 180.9mmBS.1363 Pt.2: 1995

K2757 WHI1 GANG DPWITH DUAL EARTH TERMINALS

K2757D1RED1 GANG DPWITH RED FRONTPLATE, RED ROCKER AND DUAL EARTH TERMINALS

K2747 WHI 2 GANG DP

K2657 WHI1 GANG DP WITH NEON AND DUAL EARTH TERMINALS

K2657D1RED1 GANG DPWITH RED FRONTPLATE, RED ROCKER, NEON AND DUAL EARTH TERMINALS

K2647 WHI2 GANG DPWITH NEONS

5

5

10

10

5

10

High integrity earthing

K2757, K2657 and K2737 are fitted with two earth terminals to provide adouble earth facility for use when installations are tocomply with Section 607 of BS.7671, IEE WiringRegulations

K273713 amp fuse protects all three outlets

K2757D1WHI1 GANG DPWITH RED ROCKERAND DUAL EARTH TERMINALS

K2747D1WHI2 GANG DP WITH RED ROCKERS

K2747D1RED2 GANG DPWITH RED FRONTPLATE ANDRED ROCKERS

K2737 WHI3 GANG DPWITH DUAL EARTH TERMINALS

5

5

5

10

K2757 WHI K2757 D1 RED

K2747 WHI

K2657 WHI K2657 D1 RED

K2737 WHI

K2757 D1 WHI

K2747 D1 WHI

K2747 D1 RED

K2647 WHI

Logic Plus20


SwitchsocketOutlets

WITH OUTBOARD

ROCKERS

13 AMP

FLUSH

RCD PROTECTED

13 AMP

FLUSH

FILTERED

13 AMP

FLUSH

NON STANDARD 13 AMP FLUSH

MOUNTING BOXESFLUSH: 862 ZIC (25mm)886 ZIC (35mm for extra wiring space)SURFACE: K2142 WHI K2746 and K2746 D1 are fittedwith two earth terminals to provide a double earth facility for use wheninstallations are to comply withSection 607 of BS.7671, IEE WiringRegulationsK2746 CE is provided with facility for‘clean earth’ connectionDIMENSIONS: 86 x 146mmFIXING CENTRES:120.6mmBS.1363 Pt.2: 1995 (K2746) andwhere relevant for K2746 CE

K2746 WHI2 GANG DP WITH OUTBOARD ROCKERS AND DUAL EARTH TERMINALS

K2746CEWHI2 GANG DP WITH OUTBOARD ROCKERS AND ‘CLEAN EARTH’ FACILITY

K2746D1WHI2 GANG DP WITH RED OUTBOARD ROCKERS AND DUAL EARTH TERMINALS

K2746D1RED2 GANG DP WITH RED FRONTPLATE, RED OUTBOARD ROCKERSAND DUAL EARTH TERMINALS

5

5

5

10 K6211 WHI2 GANG10mA RATED TRIPPING CURRENTACTIVE CONTROL CIRCUIT

K6231 WHI2 GANG30mA RATED TRIPPING CURRENTACTIVE CONTROL CIRCUIT

K6233 WHI2 GANG30mA RATED TRIPPING CURRENTPASSIVE CONTROL CIRCUIT

1

1

1

MOUNTING BOXESFLUSH: 886 ZIC - 35mm deepSURFACE: K2140 WHI, 30mm deepEarth pin operated shutter.These a.c. and pulsating d.c. fault current sensitive products have up to 15mm thickfrontplates and are suitable for boxes with 30mm min. depth and supply voltagesof 240V 50Hz.A 25mm deep box (862 ZIC) can be used but conduit entry is restricted.Refer to Sentrysocket section, page 229, for more information on active and passivecontrol circuits.DIMENSIONS: 86 x 146mmFIXING CENTRES: 120.6mmBS.7288: 1990 All units are a.c. and pulsating d.c. fault current sensitive devices.Maximum total load 13 amps



K6303 WHI1 GANG30mA RATED TRIPPING CURRENTPASSIVE CONTROL CIRCUIT

1

1

1

MOUNTING BOXESFLUSH: 886 ZICSURFACE: K2172 WHIK1816 provides filtering to reducevoltage spikes only. K1826 provides two way filtering toreduce voltage spikes and radiofrequency interference on the mains.Protected by thermal cut-out.

K1816 WHI2 GANG DP SPIKE

K1816KOWHI2 GANG DP SPIKE WITH TAMPERPROOF SCREW

K1826 WHI2 GANG DP SPIKE AND RFI

K1826KOWHI2 GANG DP SPIKE AND RFI WITH TAMPERPROOF SCREW

K1800 WHIREPLACEMENT FILTER CASSETTE

5

1

1

1

1

MOUNTING BOXESFLUSH 25mm 1 GANG: 861 ZIC 2 GANG: 862 ZICFLUSH 35mm (for extra wiring space)1 GANG: 866 ZIC 2 GANG: 886 ZICSURFACE1 GANG: K2140 WHI 2 GANG: K2142 WHIThese products are provided withfacilities for ‘clean earth’ connectionand are suitable for non standardplugs with ‘T’ shaped earth pin.DIMENSIONS: 1 gang: 86 x 86mm2 gang: 86 x 146mmFIXING CENTRES: 1 gang: 60.3mm2 gang: 120.6mmBS.1363 Pt.2: 1995 where relevant

K1257 WHI1 GANG DP

K1246 WHI2 GANG DP

K1257D1WHI1 GANG DP WITH RED ROCKER

K1246D1WHI2 GANG DP WITH RED ROCKERS

K1246D1RED2 GANG DP WITH RED FRONTPLATE AND RED ROCKERS

5

5

10

5

10

K1246 WHI

K1257D1WHI

K1246D1WHI

K2746 WHI K6100 WHI

K6300 WHI

K6211 WHI

K6233 WHI

K1816 WHI

K1826 WHI

K1800 WHI

K1257 WHI

K2746D1WHI

K2746D1RED

K2746CEWHI

21Logic Plus


K6231 WHI K6303 WHI

SwitchsocketOutlets

ROUND PINFLUSH

SocketOutlets

13 AMPFLUSH

ROUND PINFLUSH

15 AMP127V FLUSH

16 AMP125/250VUNIVERSALFLUSH

AMOUNTING BOXES

FLUSH: 861 ZIC (25mm)866 ZIC (35mm for extra wiring space)

SURFACE: K2140 WHI

DIMENSIONS: 86 x 86mm

FIXING CENTRES:60.3mm

BS.546: 1950

K2891 WHI1 GANG5 AMP DP SHUTTERED

K2893 WHI1 GANG15 AMP DP SHUTTERED

K2493 WHI1 GANG15 AMP DP SHUTTERED WITH NEON

10

10

10

MOUNTING BOXESFLUSH 25mm1 GANG: 861 ZIC 2 GANG: 862 ZICFLUSH 35mm (for extra wiring space)1 GANG: 866 ZIC 2 GANG: 886 ZICSURFACE 1 GANG: K2140 WHI 2 GANG: K2142 WHIK781 is fitted with two earthterminals to provide a double earthfacility for use when installationsare to comply with Section 607 ofBS.7671, IEE Wiring RegulationsDIMENSIONS: 1 gang: 86 x 86mm2 gang: 86 x 146mmFIXING CENTRES: 1 gang: 60.3mm 2 gang: 120.6mmBS.1363: Pt 2: 1995

K780 WHI1 GANG

K781 WHI2 GANGWITH DUAL EARTH TERMINALS

5

10

MOUNTING BOXES

FLUSH: 861 ZIC (25mm)866 ZIC (35mm for extra wiring space)

SURFACE: K2140 WHI

DIMENSIONS:86 x 86mm


BS.546: 1950

K770 WHI1 GANG2 AMP SHUTTERED



10

10

10

MOUNTING BOXES

FLUSH 25mm 1 GANG: 861 ZIC2 GANG: 862 ZIC

FLUSH 35mm (for extra wiring space)1 GANG: 866 ZIC2 GANG: 886 ZIC

SURFACE1 GANG: K2140 WHI2 GANG: K2142 WHI

DIMENSIONS:1 gang: 86 x 86mm2 gang: 86 x 146mm

FIXING CENTRES:1 gang: 60.3mm2 gang: 120.6mmSSA: 444: 1985

K2251 WHI1 GANGSHUTTERED(NON UK)


5

10

MOUNTING BOXES

FLUSH: 861 ZIC

SURFACE: K2140 WHI

The universal socket does notincorporate an earth contact.Therefore, appliances needing earthconnection (class 1 equipment)must NOT be used with this socket.The socket is intended for use withBS, USA and CEE standard plugs.

DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS.5733: 1995


10

K2891 WHI

K2893 WHI

K2493 WHI

K781 WHI

K780 WHI K770 WHI

K771 WHI

K2251 WHI

K2252 WHI

K772 WHI

K4155 WHI

Logic Plus22


SocketOutlets

16 AMP2P + E FLUSH

Three Pole Fan Isolator

10 AMPFLUSH

Shaver Socket Outlet

FLUSH

Shaver Supply Units

FLUSH

MOUNTING BOXESFLUSH: (35mm)1 GANG: 866 ZIC2 GANG: 886 ZICSURFACE: 1 GANG: K2031 WHI2 GANG: K2172 WHIThese products are not suitable forinstallation in 25mm boxesDIMENSIONS:1 gang: 86 x 86mm2 gang: 86 x 146mmFIXING CENTRES:1 gang: 60.3mm2 gang: 120.6mmIEC 60884-1: 2002

K4150 WHI1 GANG16 AMP 250V SHUTTERED(NON UK)

K4152 WHI2 GANG16 AMP 250VSHUTTERED(NON UK)

5

10

MOUNTING BOXES

FLUSH: 3995 ZIC

SURFACE: K2160 WHI

For local isolation of fans with orwithout timers for repair or routinemaintenance.



BS EN. 60947-3: 1992

K4857 WHIWITH SWITCHLOCK AND PADLOCK

K4859 WHIWITHOUT SWITCHLOCK

K4858 SWITCHLOCK FOR FAN ISOLATOR

K2000 PADLOCK

1

10

10

10

MOUNTING BOXESFLUSH: 861 ZICSURFACE: K2140 WHI

Must not be installed in abathroom or shower room.Designed for wiring onto lighting circuits DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mm

BS.4573: 1970

K700 WHISHAVER SOCKET OUTLET 200-250 VOLTS.50/60HzFUSED.Incorporates a self-resetting overload device, limitingcurrent to 20VA.

10

MOUNTING BOXESFLUSH: 878 ZICSURFACE: K2172 WHIThis design incorporates a doublewound isolating transformer rated20VA at 230 or 115 volts it meetsBS EN 61558 making it safe for usein bathrooms. Insertion of a shaverplug automatically switches on byenergising the primary side of theisolating transformer – removalautomatically switches off. Thetransformer is protected againstoverload by an automatic solidstate overload device withautomatic resetting.DIMENSIONS: 146 x 86mmFIXING CENTRES: 120.6mm.

BS EN 61558-2-5: 1998

K701 WHISHAVER SUPPLY UNIT DUAL VOLTAGE.115/230V OUTPUT(220/240V 50/60Hz INPUT)

K706 WHISHAVER SUPPLY UNIT DUAL VOLTAGE.115/230V OUTPUT(120/130V 50/60Hz INPUT)(NON UK)

1

1

K4150 WHI

K4152 WHI

K700 WHI

K701 WHI

K706 WHI

K4857 WHI

K4859 WHI

K4858 A wide selection ofother finishes are alsoavailable.

See the Decorativeproducts section andClearshave.

Clearshave

Chroma Plus

23Logic Plus


Features andBenefits

Connection Units

SWITCHEDFLUSH

UNSWITCHEDFLUSH

MOUNTING BOXES

K1030, K1040, K1060 and K1070FLUSH: 866 ZICSURFACE: K2031 WHI

330 and 370FLUSH: 866 ZICSURFACE: K2140 WHI

All units are fitted with a 13 ampfuse-link to BS.1362. See page 59for spare fuse-links.

The fuse carrier can be locked inthe open position by removing thefuse and using K2000 fuse carrierpadlock

Base entry frontplates are 12.5mm deep

K330 WHIDP WITH FLEX OUTLET IN BASE AND THICK FRONTPLATE

K370 WHIDP WITH NEON, FLEX OUTLET IN BASE AND THICK FRONTPLATE

K370D1WHIDP WITH NEON, FLEX OUTLET IN BASE, THICK FRONTPLATE AND RED ROCKER

K1030 WHIDP WITH FRONT FLEX OUTLET

10

10

10

10

K1030 and K1070 front flex outletproducts cannot be mounteddirectly onto MI Cable Box K2131.A mounting frame K2134 will haveto be used between the productand the box.

Base entry frontplates are 12.5mm deep



BS.1363 Pt.4: 1995

K1040 WHIDP

K1040KOWHIDP WITH TAMPERPROOF SCREW

K1060 WHIDP WITH NEON

K1060D1WHIDP WITH NEON AND RED ROCKER

K1070 WHIDP WITH FRONT FLEX OUTLET AND NEON

K1070D1WHI DP WITH FRONT FLEX OUTLET,NEON AND RED ROCKER

K2000FUSE CARRIER PADLOCK

10

10

10

10

10

10

10

MOUNTING BOXES

FLUSH: 866 ZIC (35mm)

SURFACE: K2140 WHI All units are fitted with a 13 ampfuse-link to BS.1362. See page 59for spare fuse-links. Base entry frontplates are 12.5mm deepThe fuse carrier can be locked inthe open position by removing thefuse and using K2000 fuse carrierpadlockDIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS.1363 Pt.4: 1995

K337 WHIWITH FLEX OUTLET IN BASE AND THICK FRONTPLATE

K337KOWHIWITH FLEX OUTLET IN BASE, THICK FRONTPLATE AND TAMPERPROOF SCREW FOR FUSE CARRIER

K377 WHIWITH FLEX OUTLET IN BASE, NEON ANDTHICK FRONTPLATE

10

10

10

K337 WHI

K337KOWHIK370 WHI

K330 WHI

K1060 WHI

K1040 WHI

K1060D1WHI

K1030 WHI K1070 WHI K1070D1WHI

K377 WHI

A screwless cord gripautomatically clampsand securely holds thecable in connectionunits with base andfront flex outlets

Switched units aredouble pole withneutral pole contacts‘making’ before and‘breaking’ after livecontacts. Rockers withbuilt-in indicators areavailable

When servicing orrepairing appliances,fuse carriers remainattached to thefrontplate whenopened and can bepadlocked for safety

An optionaltamperproof screw on fuse carriers isparticularly useful for appliances in public areas

In-line terminals, backed out captiveterminal screws andclear marking makewiring up easy

K370D1WHI

Logic Plus24


Dual Switch

20 AMP FLUSH

DP Switches

20 AMP FLUSH

32 AMP FLUSH

45 AMP

MOULDED

FLUSH

45 AMP

METAL

FOR CONTROLLING DUALIMMERSION HEATERS

MOUNTING BOXESFLUSH: 866 ZICSURFACE: K2140 WHI

Only mounting boxes with an earthterminal should be used.These products are marked ‘on’ and‘off’ against the one-way DP switchand ‘sink’ and ‘bath’ against thetwo-way SP switch.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS.3676 Pt.1: 1989

K5208 WHI

K5207 WHIWITH NEON

10

10

MOUNTING BOXES

FLUSH: 866 ZIC

SURFACE:K2140 WHIK2031 WHI (for extra wiring space)

Base entry frontplates are 12.5mm deep.

All switches are complete withearth terminals.

Not recommended for switchinglarge banks of PCs


FIXING CENTRES: 60.3mm

BS EN 60669-1: 2000

K5403 WHIWITH FLEX OUTLET IN BASE

K5423 WHIWITH FLEX OUTLET IN BASE AND NEON

K5423WHWHIWITH FLEX OUTLET IN BASE,NEON AND MARKED ‘WATER HEATER’.

K5423D1WHIWITH FLEX OUTLET IN BASE, NEON AND RED ROCKER

10

10

10

10

MOUNTING BOXES

FLUSH:866 ZIC (6mm2 conductors) 877 ZIC (10mm2 conductors)

SURFACE:K2140 WHI (6mm2 conductors)K2031 WHI (10mm2 conductors)

Supplied with 8 self-adhesiveplastic identification labels markedhob, fan, oven, water heater,shower, air conditioner, cooker andwashing machine.




BS EN 60669-1: 2000

K5105 WHIWITH NEON

1

MOUNTING BOXES

FLUSH:886 ZIC (6mm2 conductors) 878 ZIC (10mm2 conductors)

SURFACE:K2172 WHI

K5205 WHI and K5215 WHISupplied with 8 self-adhesiveplastic identification labels markedhob, fan, oven, water heater,shower, air conditioner, cooker andwashing machine.




BS.3676 Pt.1: 1989

K5205 WHI

K5215 WHIWITH NEON

K5215CKWHIWITH NEON AND MARKED ‘COOKER’

K5215SHWHIWITH NEON AND MARKED ‘SHOWER’

1

1

1

1

K5230Supplied with mounting box. Earthterminal fitted on base of box.Not recommended for switchinglarge banks of PCsDIMENSIONS: 150 x 89 x 50mmKNOCKOUTS: 8 x 20mmTERMINAL CAPACITY:16mm2 conductorsBS.3676 Pt.1: 1989

K5012Not supplied with mounting box.FLUSH: 5120 ALMSupplied with earth terminals Not recommended for switchinglarge banks of PCsDIMENSIONS: 178 x 165mmBS.3676 Pt.1: 1989

K5230 WHIWITH NEONSURFACE MOUNTED

K5012 WHIWITH NEONFLUSH MOUNTED

1

1

K5423 WHI

K5105 WHI

K5205 WHI

K5215CKWHI

K5423D1WHI

K5423WHWHI

K5403 WHI

K5012 WHI

K5230 WHI

K5208 WHI

K5207 WHI

25Logic Plus


Cooker Connection Unit

FLUSH

Cooker Controls

45 AMP

MOULDED

FLUSH

45 AMP

MOULDED

SURFACE

45 AMP

METAL

FLUSH

45 AMP

METAL

SURFACE

MOUNTING BOX

FLUSH: 877 ZIC

Supplied complete with terminalblock, each terminal of which willaccommodate up to two 10mm2conductors.

Moulded cover plate, cable clamp included.



BS.5733: 1995

K5045 WHI 10

MOUNTING BOXES

FLUSH: 886 ZIC: (Up to 6mm2 conductor)878 ZIC: (Up to 10mm2 conductor)

Rotary operated shutter.DIMENSIONS: 86 x 146mm


BS.4177: 1992

K5060 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET

K5061 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLETWITH NEONS

1

1

Supplied complete with mountingbox and cable restraint.

Fitted with earth terminals.

Rotary operated shutter.DIMENSIONS:86 x 146 x 60mm

BS.4177: 1992

K5040 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET

K5041 WHI45 AMPDP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET WITH NEONS

1

1

MOUNTING BOX

FLUSH: 5120 ALM


Rotary operated shutter.DIMENSIONS:178 x 165mm

BS.4177: 1992

K5011 WHI45 AMP DP MAIN SWITCHAND 13 AMP SWITCHSOCKET OUTLETWITH NEONS

1

Supplied complete with mountingbox.


Rotary operated shutter.DIMENSIONS: 156 x 144 x 67mm

KNOCKOUTS:5 x 25mm. Two in each of top and bottom,one in back.

BS.4177: 1992

K5001 WHI45 AMP DP MAIN SWITCH AND 13 AMP SWITCHSOCKET OUTLET WITH NEONS

1

K5011 WHI K5001 WHI

K5045 WHI

K5061 WHI

K5040 WHI

K5041 WHI

K5060 WHI

Logic Plus26


Plateswitches

10 AMP

FLUSH

MOUNTING BOXES

FLUSH:1, 2 & 3 GANG: 3995 ZIC

4 & 6 GANG: 862 ZIC

SURFACE:1, 2 & 3 GANG: K2160 WHI

4 & 6 GANG: K2161 WHI

These switches do not have to bederated when used with fluorescentor inductive loads.

K4871, K4872, K4873, K4874, K4879These switches can be wired aseither one-way or two-way.

K4870 WHI1 GANG SP ONE-WAY

K4871 WHI1 GANG SP TWO-WAY


K4875 WHI1 GANG INTERMEDIATE

10

10

10

10

DIMENSIONS:1, 2 & 3 gang: 86 x 86mm4 & 6 gang: 86 x 146mm

FIXING CENTRES:1, 2 & 3 gang: 60.3mm4 & 6 gang: 120.6mm

BS EN 60669-1: 2000

20 AMP VERSIONS

K4870, K4873, K4874, K4875,K4871 & K4872 are all availableas 20 amp SP versions. Use suffixD2 WHI when ordering.

K4867is 20amp DP 1 way version of K4871.

K4868is 20amp DP 1 way version of K4872.

K4876 WHI1 GANG DP ONE-WAY




5

5

10

10

MOUNTING BOXES

FLUSH:3995 ZIC

SURFACE:K2160 WHI



BS EN 60669-1: 2000

K4878B WHI1 GANG SP TWO WAYPUSH SWITCH WITH BELL SYMBOLPUSH TO MAKE OR BREAK

K4878P WHI1 GANG SPTWO WAY PUSH SWITCH MARKED ‘PRESS’PUSH TO MAKE OR BREAK

10

10

K4871 WHI

K4872 WHI

K4875 WHI

K4876 WHI

K4873 WHI

K4874 WHI

K4878B WHI

K4878P WHI

K4879 WHI

K4870 WHI

Neon locator on a plateswitch

The Logic Plus finish is also available in the Grid Plus modular system. See pages 148-155

NEON

LOCATOR

Neon Plateswitch Locator is for usewith any 1, 2 and 3 gang LogicPlus plateswitches.

Used for location of switches indark situations.


BS.5733: 1979

K3041 NEON PLATESWITCHLOCATOR 200-250V. 50Hz.

5

K3041

27Logic Plus


Plateswitches

WITH WIDE ROCKERS

10 AMP

FLUSH

Architrave Switches

10 AMP

FLUSH

Intelligent Dimmer Switches230V a.c. 50HzTUNGSTEN FILAMENTAND LOW VOLTAGEHALOGEN LIGHTINGFLUSH

MOUNTING BOXESFLUSH: 3995 ZICSURFACE:K2160 WHIK2140 WHI (for extra wiring space)These switches do not have to bederated when used with fluorescentor inductive loads.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmBS EN 60669-1: 200020 AMP DP VERSIONS K4787 is 20 amp DP 1 wayversion of K4781.K4788 is 20 amp DP 1 wayversion of K4782. BS. 3676: 1989

K4781 WHI1 GANG SP TWO-WAY WITH WIDE ROCKER

K4782 WHI2 GANG SP TWO-WAY WITH WIDE ROCKERS

K4783 WHI3 GANG SP TWO-WAY WITH WIDE ROCKERS

K4785 WHI1 GANG SP INTERMEDIATE WITH WIDE ROCKER

10

10

10

10

MOUNTING BOXESFLUSH:1 GANG: 3921 ZIC2 GANG: 3922 ZICSURFACE:1 GANG: K2151 WHI2 GANG: K2152 WHIThese switches do not have to bederated when used with fluorescent orinductive loads.K4841, K4842 These switches can bewired as either one-way or two-way.DIMENSIONS:1 gang: 86 x 32mm;2 gang: 146 x 32mmFIXING CENTRES:1 gang: 60.3mm; 2 gang: 120.6mmBS EN 60669-1: 2000

K4841 WHI1 GANG SPTWO-WAY

K4842 WHI2 GANG SPTWO-WAY

K4848B WHI1 GANG SP PUSH SWITCH WITH BELL SYMBOLPUSH TO MAKE OR BREAK

K4848P WHI1 GANG SP PUSH SWITCH MARKED ‘PRESS’PUSH TO MAKE OR BREAK

5

5

5

5

MOUNTING BOXESWITH/WITHOUT PATTRESS (Pattress is supplied with K1501, K1521)K1522FLUSH: 861 ZIC/866 ZICSURFACE: K2140 WHIK1501, K1521 FLUSH: with pattress: 16mm deep min 3995 ZICwithout pattress: 25mm deep min 861 ZICSURFACE: K2160 WHI/K2140 WHIDimmers comply with BS EN 55015 (CISPR15) for RFI suppression. Micro controller based circuitry to provideelectronic soft-start and overload protection.Suitable for use with good quality electronicor wire wound transformers. Can also beused with good quality mains voltagehalogen lamps incorporating GU10 bases.Please check with lamp manufacturer todetermine suitability.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmConforms to BS EN 60669-2-1,BS EN 55015

K1501 WHI LV1 GANG SINGLETWO WAY 60W/VA-500W/400 VA

K1521 WHI LV1 GANG SINGLETWO WAY 40W/VA-300W/240 VA

K1522 WHI LV1 GANG DOUBLETWO WAY 2 x 40W/VA-300W/240 VA

1

1

1

K4781 WHI

K4782 WHI

K4783 WHI

K4848B WHI

K4785 WHI

Wide rocker plateswitches are not only a stylish

alternative to standard plateswitches, but with the

fixing screws hidden, the rocker cap acts as an

additional barrier to prevent unwanted tampering in

public areas. They are also very practical and easy to

use for the young and elderly alike.

K4848P WHI

K1501 WHI LV

K1521 WHI LV

K1522 WHI LV

Micro controller based circuitry toprovide electronic soft-start andoverload protection. Suitable for usewith good quality electronic or wirewound transformers. Can also beused with good quality mains voltagehalogen lamps incorporating GU10bases. Please check with lampmanufacturer to determine suitability.

K4842 WHI

K4841 WHI

Logic Plus28


StandardDimmer Switches

230V a.c. 50Hz

TUNGSTEN FILAMENT

FLUSH

Dimmer Switches(Non UK)

120-134V 60Hz

FLUSH

200-250V a.c.

50 or 60Hz

FLUSH

Blank Plates

FLUSH

Flex OutletFrontplate

FLUSH

MOUNTING BOXESFLUSH: 861 ZIC-25mm deep. Withpattress: 3995 ZIC-16mm deep minSURFACE: K2140 WHI-30mm deep.With pattress: K2160 WHI-16mm deepminOnly suitable for tungsten filamentlamps. NOT suitable for fluorescentlamps or low voltage lighting.DIMENSIONS: 86 x 86mmFIXING CENTRES: 60.3mmConforms to BS EN 60669-2-1 and BS EN 55015

K1511 WHI1 GANG SINGLEONE WAY 65-450W

K1531 WHI1 GANG SINGLEONE WAY 40-250W

K1532 WHI1 GANG DOUBLEONE WAY 2 x 40-250W

K1533 WHI1 GANG DOUBLETWO WAY 2 x 40-250W

K1534 WHI1 GANG SINGLETWO WAY 40-250W

K1535 WHI1 GANG SINGLETWO WAY 65-450W

1

1

1

1

1

1

MOUNTING BOXESFLUSH: 1 GANG: 861 ZIC-25mm deep min2 GANG: 886 ZIC-35mm deep minSURFACE: 1 GANG: K2140 WHI-30mm deep2 GANG: K2142 WHI-30mm deepDIMENSIONS:K1731, K174186 x 86mmK1761146 x 86mm

FIXING CENTRES: K1731, K174160.3mmK1761120.6mm

K1731 WHI1 GANG SINGLEONE WAY40-250W

K1741 WHI1 GANG SINGLETWO WAY60-450W

K1761 WHI2 GANG SINGLE DIMMERTWO WAY90-650W

1

1

1

MOUNTING BOXESFLUSH: 861 ZIC-25mm deep minSURFACE: K2140 WHI-30mm deep

DIMENSIONS: 86 x 86mmFIXING CENTRES:60.3mm

K1541 WHI1 GANG SINGLEONE WAY75-500W 50Hz

K1561 WHI1 GANG SINGLETWO WAY100-1000W 50Hz



K1661 WHI1 GANG SINGLETWO WAY100-1000W 60Hz

K1539 WHIFAN CONTROLLER1 GANG SINGLE ONE WAY300 VA 50Hz

1

1

1

1

1

1

K3825 WHI For use with 3921 ZIC and K2151WHI mounting boxes.

K5033 WHIFor use with 5120 ALM deep metalbox.

DIMENSIONS:3825 WHI: 86 x 31mm3827 WHI: 86 x 86mm3828 WHI: 86 x 146mm5033 WHI: 178 x 165mm

FIXING CENTRES:3825 WHI: 60.3mm3827 WHI: 60.3mm3828 WHI: 120.6mm5033 WHI: 133mm

BS.5733: 1995

K3825 WHI1 GANG MOULDED ARCHITRAVE

K3827 WHI1 GANG MOULDED

K3828 WHI2 GANG MOULDED

K5033 WHIMETAL

1

10

10

10

Complete with three pairs ofterminals, each suitable for 2 x 2.5mm2 conductors and a1.5mm2 flexible cord. A cord-grip is also fitted.

Frontplate thickness is 12.5mm.Hole diameter is 11mm.



BS.5733: 1995

K1090 WHIFLEX OUTLET FRONTPLATE.UNFUSED 20 AMP RATING

10

K1511 WHI

K1531 WHI

K1532 WHI

K1533 WHI

K1731 WHI

K1741 WHI

K1761 WHI

K1541 WHI

K1561 WHI

K1631 WHI

K1661 WHI

K1090 WHIK3827 WHIK3825 WHI

K3828 WHI

K5033 WHI

29Logic Plus


MODULAR DATACOMS

Euro DatacomFrontplates

FRONTPLATES

Euro DatacomModules

RJ11/12 RJ45 CAT 5E ISDN

MOUNTING BOXES

Suitable for flush boxes to BS.4662: 1970 and surface boxesto BS.5733: 1995

Refer to appropriate module forminimum box depth.

FIXING CENTRES1 gang: 60.3mm2 gang: 120.6mm

BS.5733;1995 where applicable

Note: No grid required, modulesjust clip into place

K182 WHI1 GANG EURO FRONTPLATETWO MODULEAPERTURE SIZE 50 X 50MM

K184 WHI2 GANG EURO FRONTPLATEFOUR MODULEAPERTURE SIZE 100 X 50MM

10

10

Suitable for both RJ11 and RJ12jacksRJ11; 4 wireRJ12; 6 wire

MOUNTING BOXESMinimum box depth 25mm

FCC68

K5887 WHIK5887 BLKRJ11/12 ONE MODULE 25 X 50MM

55 K5840 WHI

K5840 BLKISDNONE MODULE 25 X 50MM

55

Enhanced Cat 5 performance.Suitable for both 568A and 568Bwiring schemes.Supplied with cable tie and cableanchors to secure wires in theconnectors.

MOUNTING BOXESMinimum box depth25mm standard32mm screened

TIA/EIA TSB40A: Cat 5eTIA/EIA 568-A: Cat 5eISO/IEC11801: Cat 5e

Incorporates line terminatingresistor.

MOUNTING BOXESMinimum depth 25mm

TIA/EIA TSB40ATIA/EIA 568-AISO/IEC11801

K5844 WHIRJ45 CAT 5E ANGLEDONE MODULE 25 X 50MM

K5845 WHIK5845 BLKRJ45 CAT 5EONE MODULE 25 X 50MM

K5845s WHIK5845s BLKRJ45 CAT 5E SCREENEDONE MODULE 25 X 50MM

55

55

5

K184 WHI

K182 WHIK5887 WHI K5887 BLK K5840 WHI K5840 BLK

K5845 WHI K5845 BLK

K5845s WHI K5845s BLK

K5844 WHI

Logic Plus30


K5830

MOUNTING BOX :25mm minimum35mm (for extra wiring space)


BS. 1363: Part 2: 1995

K5831

MOUNTING BOX: 46mm


IEC 60884-1: 2002

K5832

MOUNTING BOX: 35mm46mm (for extra wiring space)


SSA.444: 1985

K5830 WHIK5830 BLKUK 1 GANG EURO 2 MODULE 13 AMP 250V SHUTTERED

K5831 WHIK5831 BLKGERMAN 2P+E16 AMP 250V SHUTTEREDEURO 2 MODULE (NON UK)

K5832 WHIK5832 BLKAMERICAN15 AMP 127V SHUTTEREDEURO 2 MODULE (NON UK)

1010

1010

1010

PowerModules

K5830 WHI

K5831 WHI

K5832 WHI

Mains operated products and extra low voltage modules must notbe installed within the same frontplate. Refer to BS. 7671 IEEWiring Regulations for details.

BNC

TV CO-AXIAL OUTLETSFOR DIGITAL TVSCREENED NON ISOLATED BLANKS

50 Ohm crimp connector suitablefor use with RG58, URM43,URM76 and Beldon 9907 type co-axial cables.

MOUNTING BOXESMinimum box depth 25mm

K5801 WHIK5801 BLKBNC 50ΩONE MODULE 25 X 50MM

55

Fully screened non isolated TVoutlets containing a combination ofsingle, TV/FM Diplexer andTV/FM/SAT Triplexer for use withindigital TV systems and interactiveTV services. Single outlets forconnection to a single TV, FM orSatellite co-axial aerial lead.

MOUNTING BOXESMin box depth 32mmDIMENSIONS1 Module 25 x 50mm2 Module 50 x 50mm

BS.3041:1997IEC 169-2:1965BSEN 50083 & BS.5733:1995 where applicable

K5850 WHIK5850 BLKSINGLE OUTLET (IEC MALE)ONE MODULE 25 X 50MM

K5851 WHIK5851 BLKSINGLE OUTLET (IEC FEMALE)ONE MODULE 25 X 50MM

K5855 WHIK5855 BLKSINGLE F-TYPE SATELLITE SOCKETONE MODULE 25 X 50MM

55

55

55

TV/FM diplexer units for connection toa single co-axial aerial lead withcombined TV and FM signals.TV/FM/SAT triplexer units forconnection to a single co-axial aeriallead with combined TV,FM andSatellite signals

PERFORMANCESingle TV: DC to 950MHz

Sat: DC to 1.75GHzDiplexer TV: DC to 68.5MHz &

174 to 862MHzFM: 87.5 to 108MHz

Triplexer TV: 5 to 68.5 MHz &174 to 862MHzFM: 87.5 to 108MHzSat: DC to 200kHz &950 to 2400MHz

K5852 WHIK5852 BLKTWIN OUTLET TV/FM DIPLEXERTWO MODULE 50 X 50MM

K5853 WHIK5853 BLKTRIPLE OUTLETTV/FM/SATELLITE TRIPLEXERTWO MODULE 50 X 50MM

55

55 K180 WHI

TWO MODULEBLANK 50 X 50MM

K188 WHIK188 BLKONE MODULEBLANK 25 X 50MM

K186 WHIK186 BLKHALF MODULEBLANK 12.5 X 50MM

1010

1010

10

BT TELEPHONE

K5820 WHIK5820 BLKBT MASTER ONE MODULE 25 X 50MM

K5821 WHIK5821 BLKBT SECONDARY ONE MODULE 25 X 50MM

55

55


BS.6312 part 2


BS.5733:1995 where applicable

K5820 WHI K5820 BLK K5801 WHI K5801 BLK

K5821 WHI K5821 BLK

K5850 WHI K5850 BLK

K5851 WHI K5851 BLK

K5855 WHI K5855 BLK

K5852 WHI

K5853 WHI

K188 BLK

K186 WHI

These products are fully compatible with Labgear TV distribution systems andare approved for use in “Sky Homes” and “Homes On” specifications

K180 WHI

K5852 BLK

K186 BLK

K188 WHI

31Logic Plus


Mains operated products and extra low voltage modules must notbe installed within the same frontplate. Refer to BS. 7671 IEEWiring Regulations for details.

K5740 WHIK5740 BLKISDN ONE MODULE

55K5787 WHI

K5787 BLKRJ11/12 ONE MODULE

55

LJU6C DatacomFrontplates

FRONTPLATES RJ11/12/ RJ45 CAT 5E ISDN BLANKS

K172 WHI1 GANG TWINLJU6C FRONTPLATETWO MODULEAPERTURE SIZE 22 X 37MM

10

K5745 WHI K170 WHI

K170 BLK

MOUNTING BOXESsuitable for flush boxes toBS.4662:1970 and surface boxes toBS.5733:1995 Refer to appropriate module forminimum box depth.FIXING CENTRES1 gang: 60.3mm2 gang: 120.6mmBS.5733:1995 where appropriateNote: No grid required, modules justclip into place

Suitable for both RJ11 and RJ12jacks.RJ11: 4 wireRJ12: 6 wireMOUNTING BOXESMinimum box depth 25mmFCC68

Enhanced Cat 5 performance.Suitable for both 568A and 568Bwiring schemes.Supplied with cable tie and cableanchors to secure wires in theconnectorsMOUNTING BOXESMinimum box depth 25mm (unscreened)32mm (screened)TIA/EIA TSB40A: Cat5eTIA/EIA 568-A: Cat5eISO/IEC11801: Cat5e

Incorporates line terminatingresistorMOUNTING BOXESMinimum box depth 25mmTIA/EIA TSB40ATIA/EIA 568-AISO/IEC11801

MOUNTING BOXESMinimum box depth 16mmBS.5733:1995 where appropriate

LJU6C DatacomModules

K5745 WHIK5745 BLKRJ45 CAT 5EONE MODULE

K5745s WHIK5745s BLKRJ45 CAT 5ESCREENEDONE MODULE

55

55 K170 WHI

K170 BLKONE MODULE BLANK

1010

K5740 WHI

K5740 BLKK5787 BLK

K5745s WHI

K5745s BLK

K5787 WHIK172 WHI

K5745 BLK

Logic Plus32


MK ModularDatacomModules

MK ModularFrontplates

MOUNTING BOXESK420 and K421are approved under OFTEL approvalNo.NS/G/23/L/100005 for direct andindirect connections between atermination point of a publictelecommunications system and anypiece of approvedtelecommunications apparatus.BS.6312 Pt 2K487 FCC 68K520 Minimum depth 40mm whenfitted with a data connector.The data connector is not provided.K190 Minimum depth 16mmBS.5733: 1995 where applicable

K420 WHITELEPHONE OUTLET BT MASTER ONE MODULE

K421 WHITELEPHONE OUTLET BT SECONDARY ONE MODULE

K487 WHIRJ11 TELEPHONE/DATA SOCKET ONE MODULE

K190 WHIBLANK ONE MODULE

5

5

10

10

K420 WHI K421 WHI

K487 WHI K190 WHIK545 WHI

K501 WHI

K501 WHIBNCDATA SOCKET 50ΩONE MODULE

K545 WHIRJ45 CATEGORY 5eDATA SOCKETONE MODULE

5

5K191 WHI1 GANGONE MODULE

K192 WHI1 GANG TWO MODULE

K193 WHI2 GANG THREE MODULE

K194 WHI2 GANGFOUR MODULE

5

5

5

5

MOUNTING BOXESMinimum box depth 25mm K545 is Cat5e IEC 11801BS EN 50173TIA/EIA 568ABS.5733: 1995 where applicable

MOUNTING BOXES

Suitable for flush boxes to BS. 4662: 1970 and surface boxesto BS. 5733: 1995

See Modules for correct box depth.

BS. 5733: 1995 where applicable

K194 WHI

K193 WHI

K192 WHI

K191 WHI

33Logic Plus


TV/FM and SatelliteCo-Axial Socket Outletswith BT Outlet

K3550 WHISINGLE OUTLET(IEC MALE)

K3551 WHISINGLE OUTLET(IEC FEMALE)

K3555 WHISINGLE OUTLETF-TYPE SATELLITE SOCKET

10

10

10 K3552 WHITWIN TV/FM DIPLEXER

K3553 WHITRIPLE TV/FM/SATTRIPLEXER

10

10 K3557 WHISINGLE OUTLET(IEC MALE)WITH BT SECONDARY

K3560 WHITWIN TV/FM DIPLEXERWITH BT SECONDARY

K3561 WHITRIPLE TV/FM/SAT TRIPLEXERWITH BT SECONDARY

5

5

10 K3562 WHITWIN TV/FM DIPLEXERWITH SINGLE TV (IEC MALE)AND BT SECONDARY

K3563 WHITRIPLE TV/FM/SAT TRIPLEXERWITH SINGLE TV (IEC MALE)AND BT SECONDARY

5

5

Telephone Socket Outlets

TV/FM and SatelliteCo-Axial Socket Outlets

FLUSH

FOR DIGITAL AND INTERACTIVE SERVICES

SCREENED, NON ISOLATED

FLUSHFOR DIGITAL AND INTERACTIVE TV SERVICES

FLUSH

K422 and K427 Are approved under OFTELapproval No.NS/G/23/L/100005 fordirect and indirect connectionsbetween a termination point of apublic telecommunications systemand any piece of approvedtelecommunications apparatus.

BS.6312 Pt.2

K4817FCC 68

K3540Accepts standard BS.646 2 amp 2 pin and earth plug where2 pins are used for telephonecircuits and the earth pin is used toensure correct polarity

K422 WHI1 GANG BT TELEPHONE MASTER

K427 WHI1 GANG BT TELEPHONE SECONDARY

K4817 WHI1 GANGRJ11 TELEPHONE SOCKET

K3540 WHI3 PIN WITHTELEPHONE SYMBOL (NON UK)

400 NATIDC INSERTION TOOL

10

10

10

10

10

MOUNTING BOXESMinimum box depth 32mm1 gang: Flush: 866 ZIC

Surface: K2181 WHI2 gang: Flush: 886 ZIC

Surface: K2183 WHI

DIMENSIONS:1 gang: 86 x 86mm2 gang: 86 X 146mm

FIXING CENTRES: 1 gang: 60.3mm2 gang: 120.6mm.

PERFORMANCESINGLE TV: DC TO 950 MHzSINGLE SAT: DC to 1.75 GHz

DIPLEXERTV: DC to 68.5MHz.FM: 87.5 to 108MHz

TRIPLEXERTV: 5 to 68.5MHz, 174 to 862MHzFM: 87.5 to 108MHzSAT:DC to 200kHz,

950 to 2400MHz

BS:3041:1997IEC169-2:1965BSEN50083 where applicableBS.5733:1995 where applicableBS.6312 Part 2

TV/FM/SAT triplexer units forconnection to a single co-axialaerial lead with combined TV, FMand Satellite signals

BT Telephone Secondary outlet foruse with interactive TV digitalservices.

K3562 and K3563 outlets withadditional single TV (male) outlet forsecondary distribution of TV signal

K422 WHI

K427 WHI

K4817 WHI

K3540 WHI

K3550 WHI

K3551 WHI

K3555 WHI

K3552 WHI

K3553 WHI

K3557 WHI

K3560 WHI

K3561 WHI

K3562 WHI

K3563 WHI

Fully screened non isolated TVoutlets containing a combination ofsingle,TV/FM Diplexer, TV/FM/SATTriplexer and secondary telephoneoutlets for use within digital TVsystems and interactive TV services.

Single outlets for connection to asingle TV, FM or Satellite co-axialaerial lead.TV/FM diplexer units for connectionto a single co-axial aerial lead withcombined TV and FM signals.

Logic Plus34


All modules from the Grid Plusrange can be used with thesefrontplates.

DIMENSIONS:1 & 2 MODULE: 86 x 86mm3 & 4 MODULE: 86 x 146mm6 & 8 MODULE: 146 x 146mm12 MODULE: 206 x 146mm

BS. 5733: 1995

K3631 WHI1 MODULE

K3632 WHI2 MODULE

K3633 WHI3 MODULE

K3634 WHI4 MODULE

10

10

10

10 K3636 WHI6 MODULE

K3638 WHI8 MODULE

1

1 K3639 WHI12 MODULE

1

TV/FM and SatelliteCo-Axial Socket Outlets

NON ISOLATED

FLUSH

ISOLATED

FLUSH

MOUNTING BOXES

FLUSH:861 ZIC

SURFACE:K2140 WHI

Single outlet for connection to asingle TV or FM co-axial aerial lead.Twin outlet for connection to each oftwo separate TV/FM, co-axial aerialleads.



BS. 5733: 1995where applicable

BS.3041: 1977IEC 169-2: 1965

K3520 WHISINGLE OUTLET

K3523 WHITWIN OUTLET

K3525 WHISINGLE F TYPE SATELLITE SOCKET

K3525 D1 WHITWIN F TYPE SATELLITE SOCKET

10

10

10

10

MOUNTING BOXES

FLUSH:861 ZIC

SURFACE: K2140 WHI

Provides safety isolation rated at2000Va.c. between aerial lead andsocket. Single outlet for connection to asingle TV or FM co-axial aerial lead. Twin outlet with TV/FM diplexer forconnection to single co-axial aeriallead with combined TV & FMsignals.



BS. 5733: 1995 where applicableBS.3041: 1977 IEC 169-2: 1965

K3521 WHISINGLE OUTLET

K3522 WHITWIN OUTLET WITH FM/TV DIPLEXER

10

10

K3520 WHI

K3523 WHI

K3521 WHI

K3522 WHI

K3525 WHI

K3525 D1 WHI

K3631 WHI

K3632 WHI

K3636 WHI

K3638 WHI

K3634 WHI

K3633 WHI

K3639 WHI

Grid PlusFrontplates

35Logic Plus


Dominating the skyline of Newcastle upon Tyne, the St James’ Park Stadium has

become as much a landmark of the city as its world famous bridge. Home to six

times FA Cup winners and four times League champions, Newcastle United FC, St.

James’ Park has the second largest capacity of all grounds in the English Premier

League.

Although the wiring devices to be used in the job were an open specification, Bill

Yates, contract manager at Balfour Kilpatrick, decided to use MK Electric’s Logic Plus

range throughout the corporate hospitality suites and bar areas. The reason for his

decision was simple. “We have been using MK’s wiring devices continuously over

the past 30 years, because we have found the company’s products to be unbeatable

on reliability and performance.”

M&E Contractor Balfour Kilpatrick

St. James’ Park, Newcastle

36Case Study

TECHNICAL HOTLINE +44 (0)1268 563720

Date post:	06-Feb-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

02 LOGIC PLUS - RS Components · 2019. 10. 12. · k1816 whi k1826 whi k1800 whi k1257 whi...

Documents