D:\rajesh\LPG Pipeline\Jaipur-Jamnagar\Adden\Addendum-I.docc Ref. No.: 05/51/23KF/GAIL/002 Date: 25.06.2007 ADDENDUM-I TENDER TO TENDER NO. 05/51/23KF/GAIL/002 To, Sub.: TENDER DOCUMENT FOR VARIOUS TYPES OF VALVES FOR LPG SUPPLY FOR JAIPUR AND JAMNAGAR Ref.: Tender No.: 05/51/23KF/GAIL/002 dated 11.06.2007 With reference to above, please find attached the Addendum – I to the above tender document. This Addendum – I and shall form integral part of tender document. All other terms and conditions of the tender document shall remain unaltered. Please submit alongwith your offer this ADDENDUM-I to the tender document duly signed and stamped as a token of your acceptance of the terms and conditions stated hereinabove. Please acknowledge the receipt of this Addendum per return fax. Further please note that this Addendum – I is also available on MECON website (www.mecon.co.in ). Thanking you, Yours faithfully, for MECON Limited Encl. As above (A.K. Sharma) DGM I/c ( Contracts)
ADDENDUM-I TENDER TO TENDER NO. 05/51/23KF/GAIL/002
To, Sub.: TENDER DOCUMENT FOR VARIOUS TYPES OF VALVES FOR LPG SUPPLY FOR
JAIPUR AND JAMNAGAR Ref.: Tender No.: 05/51/23KF/GAIL/002 dated 11.06.2007 With reference to above, please find attached the Addendum – I to the above tender document. This Addendum – I and shall form integral part of tender document. All other terms and conditions of the tender document shall remain unaltered.
Please submit alongwith your offer this ADDENDUM-I to the tender document duly signed and stamped as a token of your acceptance of the terms and conditions stated hereinabove. Please acknowledge the receipt of this Addendum per return fax. Further please note that this Addendum – I is also available on MECON website (www.mecon.co.in). Thanking you,
Project : LPG Supply For Jaipur and Jamnagar Client : GAIL (INDIA) LIMITED Items : Various Types of Valves Tender No. : 05/51/23KF/GAIL/002 MR Item No.
Description Destination Remarks
1.0 BALL VALVES (LPG SERVICE) Quantity
Ball Valves as per Design Standard BS: 5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. given below. (For temperature –45oC to +65oC):
Ball Valves as per Design Standard BS: 5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. given below (For temperature –29oC to +65oC):
Jaipur Jamnagar
Size NB, mm (Inches)
Bore Ends ANSI Rating
Data Sheet No.
2.1 20(¾”) FB SW #800 MEC/23KF/05/21/M/001/DS/BV003 29 34 LO-10 nos. for Jaipur & 7 nos. for Jamnagar
Globe Valves as per Design Standard BS: 1873/BS: 5352 (As indicated in Data Sheet), Data Sheet Nos. given below (For temperature –45oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Globe Valves as per Design Standard BS: 1873/ BS: 5352 (As indicated in Data Sheet), Data Sheet Nos. given below: (For temperature –29oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Jaipur Jamnagar
Size NB, mm
(Inches)
Bore Ends ANSI Rating
Data Sheet No.
4.1 20(¾”) - SW #800 MEC/23KF/05/21/M/001/DS/GV003 0 2 4.2 50(2”) - RF #600 MEC/23KF/05/21/M/001/DS/GV004 8 4 4.3 100(4”) - RF #600 MEC/23KF/05/21/M/001/DS/GV004 6 2 4.4 150(6”) - RF #600 MEC/23KF/05/21/M/001/DS/GV004 0 1 5.0 GATE VALVES (Instrument Air Service) Gate Valves as per Design Standard API 600/602 (As indicated in Data
Sheet), Data Sheet Nos. given below and as per Technical Notes for Gate & Globe Valves (For temperature –29oC to +65oC):
Jaipur Jamnagar
Size NB, mm (Inches)
Bore Ends ANSI Rating
Data Sheet No.
5.1 15(½ ”) RB SW #800 MEC/23KF/05/21/M/001/DS001(GATE) 1 0 LO 5.2 20(¾”) RB SW #800 MEC/23KF/05/21/M/001/DS001(GATE) 1 0 5.3 25(1”) RB SW #800 MEC/23KF/05/21/M/001/DS001(GATE) 3 0 5.4 40(1.5”) RB SW #800 MEC/23KF/05/21/M/001/DS001(GATE) 3 0 5.5 50(2”) RB RF #150 MEC/23KF/05/21/M/001/DS002(GATE) 4 0 6.0 GATE VALVES (LPG SERVICE) Gate Valves as per Design Standard API 6D (As indicated in Data Sheet),
Data Sheet Nos. given below and as per Technical Notes for Gate & Globe Valves (For temperature –29oC to +65oC):
Note: Evaluation Basis- Item wise. Sub item of the main item will be treated as separate item i.e; 1.1, 1.2 ---- etc. LEGEND SW = Socket Welded BW = Butt Welded RF = Raised Face (Flanged) LO = Lock Open LC = Lock Close MOV = Motor Operated Valve FB = Full Bore RB = Reduced Bore AV = Instrument air powered actuator valve
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT
(without C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
1.2 25(1”) FB RF #800 LO-11 nos. for Jaipur & 7 nos. for Jamnagar
14
1.3 50(2”) RB RF #600 5
1.4 100(4”) RB RF #600 0
2 BALL VALVES (LPG SERVICE)
2.1 20(¾”) FB SW #800 LO-10 nos. for Jaipur & 7 nos. for Jamnagar
29
2.2 25(1”) FB SW #800 2
2.3 40(1.5”) FB SW #800 0
2.4 50(2”) RB RF #600 12
2.5 50(2”) RB BW #600 0
(2)
Description
Ball Valves as per Design Standard BS:5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –45oC to +65oC):
Ball Valves as per Design Standard BS:5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29oC to +65oC):
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAIPUR
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 1 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT
(without C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAIPUR
2.6 100(4”) RB RF #600 22
2.7 100(4”)] FB BW #600 2
2.8 100(4”) FB BW #600 MOV 1
2.9 100(4”) FB BW #600 AV 1
2.10 150(6”) RB RF #600 0
2.11 150(6”) RB RF #600 MOV 0
2.12 200(8”) RB RF #600 MOV 0
2.13 200(8”) RB BW #600 MOV 0
3 GLOBE VALVES (LPG SERVICE)
3.1 20(¾”) - RF #800 0
3.2 50(2”) - RF #600 3
4 GLOBE VALVES (LPG SERVICE)
4.1 20(¾”) - SW #800 0
4.2 50(2”) - RF #600 8
4.3 100(4”) - RF #600 6
4.4 150(6”) - RF #600 0
Globe Valves as per Design Standard BS:1873/BS:5352 (As indicated in Data Sheet) , Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –45oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Globe Valves as per Design Standard BS:1873/ BS:5352 (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.: (For temperature –29oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 2 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT
(without C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAIPUR
5 GATE VALVES (Instrument Air Service)
5.1 15(½ ”) RB SW #800 LO 1
5.2 20(¾”) RB SW #800 1
5.3 25(1”) RB SW #800 3
5.4 40(1.5”) RB SW #800 3
5.5 50(2”) RB RF #150 4
6 GATE VALVES (LPG SERVICE)
6.1 100(4”) FB RF #600 0
6.2 150(6”) FB RF #600 0
6.3 150(6”) FB BW #600 MOV 0
7 CHECK VALVES (Instrument Air Service)
7.1 50(2”) - RF #150 1
Gate Valves as per Design Standard API 600/602 (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Gate Valves as per Design Standard API 6D (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.and as per Technical Notes for Gate & Globe Valves(For temperature –29 oC to +65oC):
Check Valves as per Design Standard API 6D/ BS 1868 (As indicated in Data Sheet) , MECON’s specification no. MEC/TS/05/62/004, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29oC to +65oC):
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 3 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT
(without C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAIPUR
8 CHECK VALVES (LPG SERVICE)
8.1 150(6”) - RF #600 0
Please indicate the following:Excise Duty @ ………………CST @ …………………………… Without `C' Form
LST @ ………………..VAT @ ………………..Any Other Tax, e.g. Entry Tax, if applicable @……of …………
Check Valves as per Design Standard API 6D/ BS 1868 (As indicated in Data Sheet) , MECON’s specification no. MEC/TS/05/62/004, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29oC to +65oC):
Evaluation basis item wise
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 4 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT (without
C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
1.2 25(1”) FB RF #800 LO-11 nos. for Jaipur & 7 nos. for Jamnagar
7
1.3 50(2”) RB RF #600 12
1.4 100(4”) RB RF #600 2
2 BALL VALVES (LPG SERVICE)
2.1 20(¾”) FB SW #800 LO-10 nos. for Jaipur & 7 nos. for Jamnagar
34
2.2 25(1”) FB SW #800 0
2.3 40(1.5”) FB SW #800 2
2.4 50(2”) RB RF #600 17
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAMNAGAR
(2)
Description
Ball Valves as per Design Standard BS:5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos.. (For temperature –45oC to +65oC):
Ball Valves as per Design Standard BS:5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –29oC to +65oC):
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 1 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT (without
C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAMNAGAR
(2)
Description
2.5 50(2”) RB BW #600 2
2.6 100(4”) RB RF #600 2
2.7 100(4”)] FB BW #600 0
2.8 100(4”) FB BW #600 MOV 0
2.9 100(4”) FB BW #600 AV 0
2.1 150(6”) RB RF #600 10
2.11 150(6”) RB RF #600 MOV 3
2.12 200(8”) RB RF #600 MOV 2
2.13 200(8”) RB BW #600 MOV 1
2.14 100(4") RB BW #600 with extended
stem
4
3 GLOBE VALVES (LPG SERVICE)
3.1 20(¾”) - RF #800 6
3.2 50(2”) - RF #600 2
4 GLOBE VALVES (LPG SERVICE)
4.1 20(¾”) - SW #800 2
4.2 50(2”) - RF #600 4
Globe Valves as per Design Standard BS:1873/BS:5352 (As indicated in Data Sheet) , Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –45oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Globe Valves as per Design Standard BS:1873/ BS:5352 (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.: (For temperature –29oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 2 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT (without
C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAMNAGAR
(2)
Description
4.3 100(4”) - RF #600 2
4.4 150(6”) - RF #600 1
5 GATE VALVES (Instrument Air Service)
5.1 15(½ ”) RB SW #800 LO 0
5.2 20(¾”) RB SW #800 0
5.3 25(1”) RB SW #800 0
5.4 40(1.5”) RB SW #800 0
5.5 50(2”) RB RF #150 0
6 GATE VALVES (LPG SERVICE)
6.1 100(4”) FB RF #600 2
6.2 150(6”) FB RF #600 2
6.3 150(6”) FB BW #600 MOV 1
6.4 150(6”) FB BW #600 with extended
stem
1
6.5 150(6”) FB BW #600 MOV with extended
stem
1
7 CHECK VALVES (Instrument Air Service)
Gate Valves as per Design Standard API 600/602 (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29 oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Gate Valves as per Design Standard API 6D (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos. and as per Technical Notes for Gate & Globe Valves(For temperature –29oC to +65oC):
Check Valves as per Design Standard API 6D/ BS 1868 (As indicated in Data Sheet) , MECON’s specification no. MEC/TS/05/62/004, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –29oC to +65oC):
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 3 of 4
ADDENDUM-1
Name of Bidder:
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM :Various Types of Valves
Item Sl.No.
Remarks Qty.(Nos.)
Unit Price Ex-works
including cost of imported
raw material/ components & Customs
Duty thereon, pkg/ fwd,
excluding ED & ST on finished goods
Per Unit Terminal
Excise Duty
Per Unit Sales Tax/ VAT (without
C Form)
Per Unit Freight
upto Project Site by Road
Per Unit Any other Tax like
Entry Tax etc., if
applicable
Per Unit FOT Site
(4+5+6+7+8)
Total FOT Project
Site(3x9)
Total Ex-works(3x4)
CIF value of Imp.
Comp. Per Unit
Included in (4)
Total CIF value of
Imp. Comp.
Included(3x12)
Project Rate of Customs Duty (CD), Surcharge,
CVD included in
(4)**
Domestic Value addition (in percentage) against each
PRICE SCHEDULE FOR DOMESTIC (INDIAN) BIDDERS - JAMNAGAR
(2)
Description
7.1 50(2”) - RF #150 0
8 CHECK VALVES (LPG SERVICE)
8.1 150(6”) - RF #600 2
Please indicate the following:Excise Duty @ ………………CST @ …………………………… Without `C' Form
LST @ ………………..VAT @ ………………..Any Other Tax, e.g. Entry Tax, if applicable @……of …………
Evaluation basis item wise
Check Valves as per Design Standard API 6D/ BS 1868 (As indicated in Data Sheet) , MECON’s specification no. MEC/TS/05/62/004, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –29oC to +65oC):
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian Signature of Bidder Page 4 of 4
ADDENDUM-1
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM : VARIOUS TYPES OF VALVES
1.2 25(1”) FB RF #800 LO-11 nos. for Jaipur & 7 nos. for Jamnagar
14 7 21
1.3 50(2”) RB RF #600 5 12 17
1.4 100(4”) RB RF #600 0 2 2
2 BALL VALVES (LPG SERVICE)
2.1 20(¾”) FB SW #800 LO-10 nos. for Jaipur & 7
nos. for Jamnagar
29 34 63
2.2 25(1”) FB SW #800 2 0 2
2.3 40(1.5”) FB SW #800 0 2 2
2.4 50(2”) RB RF #600 12 17 29
2.5 50(2”) RB BW #600 0 2 2
2.6 100(4”) RB RF #600 22 2 24
2.7 100(4”)] FB BW #600 2 0 2
2.8 100(4”) FB BW #600 MOV 1 0 1
2.9 100(4”) FB BW #600 AV 1 0 1
2.10 150(6”) RB RF #600 0 10 10
Ball Valves as per Design Standard BS:5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29oC to +65oC):
Qty.(Nos.)
(2)
Ball Valves as per Design Standard BS:5351 & API 6D (As indicated in Data Sheet), MECON’s specification no. MEC/TS/05/62/002, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos.. (For temperature –45oC to +65oC):
(3)
PRICE SCHEDULE FOR FOREIGN (NON-INDIAN) BIDDERS
Item Sl.No.
Description Remarks
Por
t of
Exi
t
Cu
rren
cy Unit Price (in the stated Currency) Total PriceTotal Quantity
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian.xls Signature of Bidder Page 1 of 3
ADDENDUM-1
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM : VARIOUS TYPES OF VALVES
Estimated Shipping
Jaipur Jamnagar FOB Port of Loading
CFR Port of Entry
Mumbai
CIF Port of Entry Mumbai
FOB Port of Loading (in the stated Currency)
(4x7)
CFR Mumbai
(4x8)
CIF Mumbai (in the stated
Currency)(4x9)
Weight & Volume
of the Item
(1) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Qty.(Nos.)
(2) (3)
PRICE SCHEDULE FOR FOREIGN (NON-INDIAN) BIDDERS
Item Sl.No.
Description Remarks
Por
t of
Exi
t
Cu
rren
cy Unit Price (in the stated Currency) Total PriceTotal Quantity
Globe Valves as per Design Standard BS:1873/BS:5352 (As indicated in Data Sheet) , Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –45oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Globe Valves as per Design Standard BS:1873/ BS:5352 (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.: (For temperature –29oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Gate Valves as per Design Standard API 600/602 (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos.(For temperature –29oC to +65oC) and as per Technical Notes for Gate & Globe Valves:
Gate Valves as per Design Standard API 6D (As indicated in Data Sheet), Data Sheet Nos. as given in MR against the corresponding item nos. and as per Technical Notes for Gate & Globe Valves(For temperature –29oC to +65oC):
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian.xls Signature of Bidder Page 2 of 3
ADDENDUM-1
BID DOCUMENT NO. :05/51/23KF/GAIL/002PROJECT : LPG SUPPLY FOR JAIPUR AND JAMNAGARITEM : VARIOUS TYPES OF VALVES
Estimated Shipping
Jaipur Jamnagar FOB Port of Loading
CFR Port of Entry
Mumbai
CIF Port of Entry Mumbai
FOB Port of Loading (in the stated Currency)
(4x7)
CFR Mumbai
(4x8)
CIF Mumbai (in the stated
Currency)(4x9)
Weight & Volume
of the Item
(1) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Qty.(Nos.)
(2) (3)
PRICE SCHEDULE FOR FOREIGN (NON-INDIAN) BIDDERS
Item Sl.No.
Description Remarks
Por
t of
Exi
t
Cu
rren
cy Unit Price (in the stated Currency) Total PriceTotal Quantity
Please indicate the following:Indian Agent’s Commission as percentage of FOB Price included in the quoted prices…………………….Country of Origin……………………….
Check Valves as per Design Standard API 6D/ BS 1868 (As indicated in Data Sheet) , MECON’s specification no. MEC/TS/05/62/004, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –29oC to +65oC):
Check Valves as per Design Standard API 6D/ BS 1868 (As indicated in Data Sheet) , MECON’s specification no. MEC/TS/05/62/004, Rev-2 and Data Sheet Nos. as given in MR against the corresponding item nos. (For temperature –29oC to +65oC):
d:\rajesh\lpg\jai-jam\vol.-ii\Addendum-1 to SOR-non indian.xls Signature of Bidder Page 3 of 3
ADDENDUM - 1
1.0 Valve Manufacturer :
2.0 Valve Size (NB), mm (inch) : 100(4'') ANSI Rating : 600# Design Standard : API 6D
4.0 Connecting Pipeline Design Pressure, kg/cm2(g) : 97.52 Design Temperature, °C : -29 to +65°C
5.0 Connecting Pipe Specification : 4''5.1 Material A106 Gr. B, Sch 405.2 Diameter (OD), mm 114.35.3 Thickness, mm 6.02
6.0 Valve Construction Design6.1. Bore : Reduced Full6.2. End Connections6.3. Flanges (wherever applicable) : a) RF FF RTJ NA
b) Serrated Smooth (125 to 200 microinches AARH) NA6.4 Valve Type : Trunnion Mounted
7.0 Valve Material Specification
7.1 Body ASTM A 216 Gr. WCB/ A 234 Gr. WCB/ A 350 LF2/ A 352 Gr. LCB 7.2 Ball ASTM A 216 Gr. WCB/ A 234 Gr. WCB/ASTM A 350 LF2/ SS 316,
with ENP coating*/ AISI 4107.3 Body Seat Rings AISI 4140 + ENP Coating*/ AISI 4107.4 Seat Seal VITON7.5 Stem AISI 4140 + ENP Coating*/ AISI 410 (No casting)7.6 Stem Seals VITON/ PTFE7.7 Stud Bolts/ Nuts ASTM A 193 Gr. B7/ A 194 Gr. 2H
8.0 Corrosion Allowance : 1.5 mm
9.0 Location : Above Ground Buried
10.0 Stem Extension Requirement : Yes No Length of Stem Extension, mm : 2500+250
11.0 Gear Operator Requirement : Yes No
12.0 Gas Powered Actuator Requirement : Yes No Actuator Specification No.: N.A.
13.0 Fire Resistant Design Requirement : API 6FA
14.0 Valve Testing Requirement Test Pressure (min.), kg/cm2(g)
14.1 Hydrostatic Test BodySeat
14.2 Air Test
15.0 Anti-Static Testing Requirement : As per Standard API 6D (2002 Ed.)
16.0 Valve Painting Specification 16.1 Surface preparation by Short Blasting as per grade SA 2 1/2, Swedish Standard SIS-055 909.16.2 Three coats of paint shall be applied minimum thickness of 300 micron. (Permissible thickness in each
coat shall be within 80 to 120 micron.)17.0 Lock Open/ Lock Close Requirement : As per indicated in Material Requisition
Notes:1. This Valve Data Sheet shall be read in conjunction with MECON's Technical Specification No. MEC/TS/05/62/002, Rev-22. Inspection and Testing shall be as per attached QAP, this Data Sheet, MECON's T.S., API 6D and other relevant standards.3. Stops shall be provided for positive alignment of ball with ports and ensure proper installation of handle.4. Short pattern valves as per API 6D are not permitted, only long pattern valves are to be supplied.5. Charpy V- notch test for body, ball, body seat rings, stem & studs/nuts will be conducted as per relevant material code
* Ball & stem shall be ENP coated for minimum thickness of 80 microns.REV. NO. DATE ZONE DESCRIPTIONS BY APPRD
5. Design Pressure : 97.52 kg/cm2(g) Design Temperature : -29oC to +65°C
6. Corrosion Allowance : 1.5mm
7. Bore : Reduced Full
8. End Connections : Flanged both ends as per ASME B 16.5 Butt Weld both ends as per ASME B 16.25 Socket Welded ( as per ASME B 16.11) Flanged one end butt weld other end
9. Stem Extension Requirement : Yes No Length of Stem Extension, mm :2500+250
10. Motor Operated Valve Requirement : Yes No As per attached Actuator specification no.MEC/TS/05/E9/003, Rev-0
11. Flanges (where applicable) : a) RF FF RTJ N.A.
b) Serrated Smooth (125 to 200 AARH) N.A.
12. Pipe Specification : N.A.
13. Valve Material Specification (or Equivalent/ Superior) : Material Offereda) Body : ASTM A 216 Gr. WCB :b) Bonnet (Bolted) : ASTM A 216 Gr. WCB :c) Stem (Rising) : 13% CR. Steel (No casting) :b) Wedge Disc : 13% CR. Steel Facing :e) Body Seat Ring : 13% CR. Steel Facing :f) Stem Packing (Renewable : Graphited Braided Asbestos with sacrifical : with valve open on stream) inhibitor & Inconel wire reinforcementg) Hand Wheel (Rising) : Malleable Iron/ Cast Steel/ Fab. Steel :h) Bonnet Bolts : ASTM A193 Gr. B7 :i) Bonnet Nuts : ASTM A194 Gr. 2H :j) Bonnet Gasket : Spiral Wound SS 304/316 + CA Filler :
14. Hydrostatic Test Pressure Timea) Body : 157 kg/cm2(g) 2b) Seat : 114 kg/cm2(g) 2
15. Test Pressure with Air : 7.0 kg/cm2(g) 15
Notes:
1. Valve specification seet shall be read in conjunction with technical notes for valves.2. Valve shall be designed for intrinsically fire safe.3. Testing shall be as per API-598.4. Bidder shall clearly write all/ any deviation against each part/ material of valve in the space provided for .
Wherever bidder agrees with MECON's data sheet, bidder shall clearly indicate "agreed".5. Paint shall be suitable for corrosive industrial environment.6. Charpy 'v' notch test for body, gate, body seat rings, stem & studs/ nuts will be conducted as per relevant material code.
REV. NO. DATE ZONE DESCRIPTIONS BY APPRD REVISIONS REFERENCES DRG. NO.
SECTION PROCESS & PIPING CLIENT : GAIL (India) Limited
NAME DATE CHKD DATE
DSGN BB GS PROJECT : LPG Supply for Jaipur DRWN and Jamnagar
SCALE : REVAPPROVED A.K. JOHRI DATA SHEET FOR GATE VALVES DATA SHEET NO. MEC/23KF/05/21/M/001/DS006(GATE) 0
5. Design Pressure : 97.52 kg/cm2(g) Design Temperature : -29oC to +65°C
6. Corrosion Allowance : 1.5mm
7. Bore : Reduced Full
8. End Connections : Flanged both ends as per ASME B 16.5 Butt Weld both ends as per ASME B 16.25 Socket Welded ( as per ASME B 16.11) Flanged one end butt weld other end
9. Stem Extension Requirement : Yes No Length of Stem Extension, mm :2500+250
10. Motor Operated Valve Requirement : Yes No As per attached Actuator specification no. : N.A
11. Flanges (where applicable) : a) RF FF RTJ N.A.
b) Serrated Smooth (125 to 200 AARH) N.A.
12. Pipe Specification : N.A.
13. Valve Material Specification (or Equivalent/ Superior) : Material Offereda) Body : ASTM A 216 Gr. WCB :b) Bonnet (Bolted) : ASTM A 216 Gr. WCB :c) Stem (Rising) : 13% CR. Steel (No casting) :b) Wedge Disc : 13% CR. Steel Facing :e) Body Seat Ring : 13% CR. Steel Facing :f) Stem Packing (Renewable : Graphited Braided Asbestos with sacrifical : with valve open on stream) inhibitor & Inconel wire reinforcementg) Hand Wheel (Rising) : Malleable Iron/ Cast Steel/ Fab. Steel :h) Bonnet Bolts : ASTM A193 Gr. B7 :i) Bonnet Nuts : ASTM A194 Gr. 2H :j) Bonnet Gasket : Spiral Wound SS 304/316 + CA Filler :
14. Hydrostatic Test Pressure Timea) Body : 157 kg/cm2(g) 2b) Seat : 114 kg/cm2(g) 2
15. Test Pressure with Air : 7.0 kg/cm2(g) 15
Notes:
1. Valve specification seet shall be read in conjunction with technical notes for valves.2. Valve shall be designed for intrinsically fire safe.3. Testing shall be as per API-598.4. Bidder shall clearly write all/ any deviation against each part/ material of valve in the space provided for .
Wherever bidder agrees with MECON's data sheet, bidder shall clearly indicate "agreed".5. Paint shall be suitable for corrosive industrial environment.6. Charpy 'v' notch test for body, gate, body seat rings, stem & studs/ nuts will be conducted as per relevant material code.
REV. NO. DATE ZONE DESCRIPTIONS BY APPRD REVISIONS REFERENCES DRG. NO.
SECTION PROCESS & PIPING CLIENT : GAIL (India) Limited
NAME DATE CHKD DATE
DSGN BB GS PROJECT : LPG Supply for Jaipur DRWN and Jamnagar
SCALE : REVAPPROVED A.K. JOHRI DATA SHEET FOR GATE VALVES DATA SHEET NO. MEC/23KF/05/21/M/001/DS005(GATE) 0
MECON LIMITED
GAIL (India) Limited
TENDER FOR VARIOUS TYPES OF VALVES
FOR LPG SUPPLY FOR JAIPUR AND
JAMNAGAR Bid No. 05/51/23KF/GAIL/002
MECON LIMITED
ADDENDUM-1 TO BID NO: 05/51/23KF/GAIL/002
2. Delivery Schedule Item Description Completion Period
(i) BALL VALVES Without Actuator Domestic Bidders-16 weeks FOT Site As per MR item no. 1.1 to 1.4 & after placement of FOI.
2.1 to 2.7, 2.10 & 2.14 Foreign Bidders- 14 weeks FOB port of exit after placement of FOI.
(ii) BALL VALVES With Actuator Domestic Bidders-20 weeks FOT Site As per MR item no. 2.8, 2.9, after placement of FOI.
2.11 to 2.13 Foreign Bidders- 18 weeks FOB port of exit after placement of FOI.
(iii) GATE VALVES without Actuator Domestic Bidders-16 weeks FOT Site
As per MR item no. 5.1 to 5.5 & after placement of FOI. 6.1, 6.2 & 6.4 Foreign Bidders-14 weeks FOB port
of exit after placement of FOI.
(iv) GATE VALVES with Actuator Domestic Bidders- 20 weeks FOT As per MR item no. 6.3 & 6.5 Site after placement of FOI.
Foreign Bidders- 18 weeks FOB port
of exit after placement FOI.
(v) CHECK VALVES Domestic Bidders- 16 weeks FOT As per MR item no. 7.1 & 8.1 Site after placement of FOI.
Foreign Bidders-14 weeks FOB port
of exit after placement of FOI.
(vi) GLOBE VALVES Domestic Bidders -16 weeks FOT As per MR item no. 4.1 to 4.4, Site after placement of FOI.
