Communication Interfaces
Energy Sector© Siemens AG 2008
Which facilities does SIPROTEC 4 offer ?Which facilities does SIPROTEC 4 offer ?
IEC-Interface
The "VDEW-interface " is international standard IEC 60870-5-103 (without parameterizing)
A di t d ti f VDEW it hi ti ibl According to recommendation of VDEW switching operations are possible
PROFIBUS-Interface
PROFIBUS FMS i t l hi h i l d ll f ti E ll t i j ti ith PROFIBUS FMS is a protocol which includes all functions. Excellent in conjunction with SICAM
PROFIBUS DP – a protocol for simpler applications in conjunction with automatization s stems for ind strial applicationsystems for industrial application.
Additional interfaces
Modbus Modbus
DNP 3
...........
Energy SectorEnergy Automation© Siemens AG 2008
Which features does SIPROTEC 4 offer?Which features does SIPROTEC 4 offer?
variable interfaces
as fibre optics or electrical
exchangeable refittable
Energy SectorEnergy Automation© Siemens AG 2008
Seite 3 27.02.2013
Communication: Setup with IEC 60870-5-103
To load dispatcher
Communication: Setup with IEC 60870 5 103
To load dispatcher
SICAM SCADA
STATION
IEC 60870-5-103 e.g. RS 485
IEC 60870-5-103 z.B, point to point
Energy SectorEnergy Automation© Siemens AG 2008
Seite 4 27.02.2013
Select the communication interfacesSelect the communication interfaces
Energy SectorEnergy Automation© Siemens AG 2008
Seite 5 27.02.2013
Set the IEC addressSet the IEC address
Energy SectorEnergy Automation© Siemens AG 2008
Seite 6 27.02.2013
IEC ParameterIEC Parameter
Energy SectorEnergy Automation© Siemens AG 2008
Seite 7 27.02.2013
Masking with IEC protocolMasking with IEC protocol
X
Energy SectorEnergy Automation© Siemens AG 2008
Seite 8 27.02.2013
Communication: Setup with Profibus FMS
To Load dispatcher
Communication: Setup with Profibus FMS
DIGSI 4
To Load dispatcher
SICAM
SUB-STATION
SICAM Profibus FMS
Energy SectorEnergy Automation© Siemens AG 2008
Seite 9 27.02.2013
Setting the communication interfaceSetting the communication interface
Energy SectorEnergy Automation© Siemens AG 2008
Seite 10 27.02.2013
Setting of the Profibus FMS AddressesSetting of the Profibus FMS Addresses
PROFIBUS FMS (SICAM SAS)
PROFIBUS FMS (DIGSI 4 via PC)
Energy SectorEnergy Automation© Siemens AG 2008
Seite 11 27.02.2013
FMS Parameters on PCFMS Parameters on PC
Energy SectorEnergy Automation© Siemens AG 2008
Seite 12 27.02.2013
FMS Parameters at the deviceFMS Parameters at the device
Energy SectorEnergy Automation© Siemens AG 2008
Seite 13 27.02.2013
Masking with FMS ProtocolMasking with FMS Protocol
X
X
Energy SectorEnergy Automation© Siemens AG 2008
Seite 14 27.02.2013
Communication: Setup with additional protocols P fib DP
To load dispatcher
e.g. Profibus DP
To load dispatcher
SIMATIC S7
STATION
SIMATIC S7e.g Profibus DP
Energy SectorEnergy Automation© Siemens AG 2008
Seite 15 27.02.2013
Additional protocols e.g. Profibus DPAdditional protocols e.g. Profibus DP
Energy SectorEnergy Automation© Siemens AG 2008
Seite 16 27.02.2013
Additional ProtocolsS l t th M i fil d AddSelect the Mapping-file and Address
Energy SectorEnergy Automation© Siemens AG 2008
Seite 17 27.02.2013
Additional Protocols e.g. Profibus DP 7SJ6 St d d i 3 1 bi 3 47SJ6-Standardmapping 3-1 bis 3-4
Output 7 7 8 3 Double commands29 29 24 5 Single commands
Input 7 7 8 3 Double annunciations146 114 64 26 Single annunciations25 10 21 8 Measurement values6 2 6 2 counter values6 2 6 2 counter values2 1 1 0 value annunciations
9 9 8 2 Bytes Output
The volume of the data objects which are offered via Profibus DP
100 48 80 28 Bytes Input
The volume of the data-objects which are offered via Profibus-DP (Number of the Commands, Annunciations, Measuring values, Counter values in Output- resp. Input direction) is exclusively determined by the selection of a Standardmapping.
Energy SectorEnergy Automation© Siemens AG 2008
Seite 18 27.02.2013
pp g
Marshalling of InformationsMarshalling of Informations
Energy SectorEnergy Automation© Siemens AG 2008
Seite 19 27.02.2013
Scaling of Measuring ValuesScaling of Measuring Values
Energy SectorEnergy Automation© Siemens AG 2008
Seite 20 27.02.2013
Communication: Setup via Service Interface C
To Load Dispatcher
Communication: Setup via Service Interface C
To Load Dispatcher
DIGSI 4
Office
c p
hon
e co
nn
.
STATION
Pu
bli
c
IEC 870-5Modem
STATION
Energy SectorEnergy Automation© Siemens AG 2008
Seite 21 27.02.2013
DIGSI 4 for Remote communication i S i I t fvia Service Interface
Energy SectorEnergy Automation© Siemens AG 2008
Seite 22 27.02.2013
Communication: Setup via Operator Interface
To Load Dispatcher
Communication: Setup via Operator Interface
To Load Dispatcher
STATION
DIGSI 4
IEC 870-5
Energy SectorEnergy Automation© Siemens AG 2008
Seite 23 27.02.2013
DIGSI 4 via Operator InterfaceDIGSI 4 via Operator Interface
Energy SectorEnergy Automation© Siemens AG 2008
Seite 24 27.02.2013