05/10144
1 X3 = max. number of slots or terminals
Sketch with main dimensions STwith pins w 0,5 mm
z1±0,1
z2±0,1
b1±0,1
b2±0,1
b3±0,2
h1±0,1
h2±0,2
k±0,1
l1±0,1
l2±0,2
l5±0,2
n1+0,2
n2±0,1
d±0,1
t±0,2
X1±0,2
X2±0,2
X3 1 Type Art.-No.
4,2 4,2 5 11 14,5 5 11,5 3 9,4 11,1 16,7 0,8 1 0,5 5,8 5x2,54 15,24 2x6 EE 16/4,9/2 ST Wz 7379/2 ST 2825
1x1,7 3x2 5 11 14,5 5 13,1 3 9,4 11 16,5 0,81x0,6 2x0,4
0,5 4,2 5x2,5 12,5 2x6 EE 16/4,9/4 ST Wz 7565/4 ST 3214
Sketch with main dimensions Standard: fully pinned, partial pinning on request.
t = standard pin length, alternative pin length in brackets.
Bobbin Wz 2538 with primary margin on side of pin positions 7-12.
The grid distances X1/X2 can be used for metric and for inch measures.
STwith molded-in wires [ 0,6 mm
z1±0,2
z2±0,2
b1±0,1
b2±0,2
b3±0,2
h1±0,1
h2±0,2
k±0,2
l1±0,2
l2±0,2
l5±0,3
l6±0,3
n1+0,2
n2±0,1
t±0,2
X1±0,2
X2±0,2
X3 1 Type Art.-No.
4,1 4,1 4,9 11,1 14,6 4,9 12,4 3 9,4 11,1 14,7 16,8 0,7 13(5)
5x2,5 12,5 2x6EE 16/4,9/1 ST Wz 7388/1 ST 2886EE 16/4,9/2 ST Wz 7388/2 ST 2901
- - 4,9 11,1 14,6 4,9 12,4 37,39,4
11,1 14,7 16,81,90,7
- 3,2 5x2,5 12,5 2x6 EE 16/4,9/1 ST-WU Wz 2538/1 ST-WU 7103
Sketch with main dimensions Standard: fully pinned, partial pinning on request.
Art.-No. 3449, Wz 7776/1ST: with bore for ventilationArt.-No. 3520, Wz 7776/1ST: without bore for ventilation
STwith molded-in wires w 0,6 mm
z1±0,1
z2±0,1
b1±0,1
b2±0,1
b3±0,2
h1±0,1
h2±0,2
k±0,1
l1±0,1
l2±0,2
l5±0,2
l7±0,2
n1+0,2
n2±0,1
t±0,2
X1±0,2
X2±0,2
X3 1 Type Art.-No.
- - 5 11 16,9 5 13,4 2,8 10,1 11,1 16,8 18,9 0,5 - 3,9 6x2,54 15,24 2x7 EE 16/4,9/1 ST Wz 7776/1 ST 3449
- - 5 11 16,9 5 13,4 2,8 10,1 11,1 16,8 18,9 0,5 - 3,9 6x2,54 15,24 2x7 EE 16/4,9/1 ST Wz 7776/1 ST 3520
14505/10
1 X3 = max. number of slots or terminals H With full middle flange.
Sketch with main dimensions Standard: fully pinned, partial pinning on request. STwith pins w 0,6 mm
z1±0,1
z2±0,1
b1±0,1
b2±0,1
b3±0,2
h1±0,1
h2±0,2
k±0,1
l1±0,1
l2±0,2
l5±0,2
l7±0,2
n1+0,2
n2±0,1
t±0,2
X1±0,2
X2±0,2
X3 1 Type Art.-No.
4,7 4,7 5 11 16,9 5 13,4 3 10 11 16,8 18,9 0,6 0,6 3,5 6x2,54 15,24 2x7EE 16/4,9/1 ST Wz 7857/1 ST 3624EE 16/4,9/2 ST Wz 7857/2 ST 3638
Sketch with main dimensions
t = pin length form spacers
Bobbins with molded-in pins 0,4 x 0,6 mm.
For PCB mounting and SMD technique.
Only fully pinned available.
Standard material: PA 6.6 - 30 H natural,for SMD versions we recommend PPS material.
One set consists of: 1 bobbin1 cover
ST/II-HShortened open cover (for applications according with VDE 0570/EN 61558)
z1±0,2
z2±0,2
b1±0,2
b2±0,2
b4±0,2
b5±0,3
h1±0,2
h2±0,2
h3±0,3
k±0,2
l2±0,2
l7±0,3
n1+0,2
n2±0,1
t±0,4
X1±0,3
X2±0,3
X3 1 Type Art.-No.
3,7 3,7 4,9 9,8 11 16,8 4,9 12,8 14,5 2,9 11,1 21 0,5 1,3 3,5 5x2,54 15,24 2x6EE 16/4,9/1 ST Wz 7741/1 ST 5510EE 16/4,9/1 H Wz 7741/1 H 5499
3,7 3,7 4,9 9,8 11 16,8 4,9 12,8 14,5 2,9 11,1 21 0,5 1,3 3,5 5x2,54 15,24 2x6EE 16/4,9/2 ST Wz 7741/2 ST 5497EE 16/4,9/2 H Wz 7741/2 H 5528
SMD
Sketch with main dimensions STwith pin [ 0,6 mm
z1±0,1
z2±0,1
b1±0,1
b2±0,2
b3±0,2
h1±0,1
h2±0,2
k±0,1
l1±0,2
l2±0,2
l5±0,2
l6±0,3
n1+0,2
n2±0,1
t±0,2
X1±0,2
X2±0,2
X3 1 Type Art.-No.
- - 6,1 13,8 20,2 6,1 15,2 3,8 12,1 13,4 17,4 21,7 0,6 - 3,2 3x5 15 2x4 EE 20/6,1/1 ST Wz 6495/1 ST 2252
5,8 5,8 6,1 13,8 20,2 6,1 15,2 3,8 12,1 13,4 17,4 21,7 0,6 0,5 3,2 3x5 15 2x4 EE 20/6,1/2 ST Wz 6499/2 ST H 2595
5,8 5,8 6,1 13,8 20 6,1 14 3,9 12,1 13,3 17,4 20,4 0,6 1,1 3,5 3x5 15 2x4 EE 20/6,1/2 ST Wz 7139/2 ST 2118