of 45
7/30/2019 09-BIP Webservices Reports Setup
1/45
BIP Web Services basedReports Setup User
ManualFLEXCUBE KERNEL[April] [2011]
7/30/2019 09-BIP Webservices Reports Setup
2/45
2
Document Control
Author: Venkata Pradeep S Group: BPD
Created on : 19-Jun-2009 Revision No : 2.0
Updated by : Karthik BKrishnamurthy
Reviewed by : Mallikarjun Rao B Approved by B AshokkumarReddy
Updated on : 15-April-2011 Reviewed on : 15-April-2011 Approved on : 15-April-2011
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
3/45
3
Table of Contents
1 BIP (Web Services Based) Reports Server Setup ..................................................... 4
1.1 Introduction ....................................................................................................... 4
1.2 Prerequisites ..................................................................................................... 4
1.2.1 Applying Patch for BI Publisher 10.1.3.4.0 ...................................................4
2 Deploy Reports ..................................................................................................... 21
2.1 Creating Roles ................................................................................................. 35
2.2 Creating a user ................................................................................................ 41
2.3 FCUBS Property files Changes ......................................................................... 43
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
4/45
4
1 BIP (Web Services Based) Reports Server Setup
1.1 IntroductionThis document explains the steps to be executed to setup the BIP web services based Reports
server.
1.2 PrerequisitesGet the installation of Oracle BI Publisher 10.1.3.4.0d in server machine.
1.2.1 Applying Patch for BI Publisher 10.1.3.4.0
The latest Patch for 10.1.3.4.0 is available in Metalink under the Patch ID 9017232(UPDATE
FOR BI PUBLISHER ENTERPRISE 10.1.3.4.1).
Step 1: Download the patch 9017232 which is in zip format from Oracle Metalink.
Step 2: Extract the zip file in to local folder which is downloaded in previous step.
Step 3: Create xmlpserver folder in local location and extraction xmlpserver.war from non-oc4j
folder of ZIP file. Now this war file has to be unpacked. To do this run the following command in
CMD.
cd D:/BIP/xmlpserver jar -xvf xmlpserver.warHere D:\BIP\xmlpserver is the local folder into which the downloaded zip has been
extracted.
Once extract is done, delete xmlpserver.war.
Step 4: Once unpacked, it creates the application structure. Go to WEB-INF folder and open the
xmlp-server-config.xml file. Search for tag. In the file path provide the
repository folder in .
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
5/45
5
Step 5: After doing above said steps, login to Admin Console of WebLogic for deployment.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
6/45
6
Click on Deployments.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
7/45
7
Click on Lock & Edit. And Click on Install.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
8/45
8
Provide the path of xmlpserver as shown in the screen shot. And check the xmlpserver radio
button and click NEXT.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
9/45
9
Select the option Install this deployment as an application and click NEXT.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
10/45
10
Select the Managed Server and click NEXT.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
11/45
11
Click on NEXT.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
12/45
12
Click on FINISH.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
13/45
13
Click on SAVE.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
14/45
14
The following message should be displayed on the screen. Then click on Activate changes.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
15/45
15
The following message should be displayed.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
16/45
16
Click on Deployments.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
17/45
17
Click on Lock & Edit. And select xmlpserver Application and click on Start and select servicing
all requests
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
18/45
18
Click on YES.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
19/45
19
Following message will be displayed.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
20/45
20
The BIP Application can now be accessed using the URL
http://:/xmlpserver
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
21/45
21
2 Deploy Reports
Step 1: Login to BIP web servers Administration console as shown below
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
22/45
22
Step 2: Click Admin as shown below.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
23/45
23
Step 3: Click JDBC Connection tabas shown below.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
24/45
24
Step 4: Click ADD Data Source button as shown below.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
25/45
25
Step 5: Input the JDBC Connection details as shown below and Click the test Connection button as
shown below.
Once you see connection established successfully confirmation in the screen click Apply Button
as shown below.
Note: Make sure that Data Source Name should be the same as the one which is given fordefaultDataSourceRefin the function id specific Report XDo files. (All the XDO files should have the
same defaultDataSourceRef).
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
26/45
26
Step 6: Create a folder named as FCReports in the following location of BI Publisher setup
directory
E.g.: /xmlp/XMLP/Reports/FCReports
Step 7: Place all the files from MAIN// Repxdo and MAIN// RepRTF to the folder
xmlp\XMLP\Reports\FCReports in the destination directory.
Step8: Click the Reports tab as show belowIn the below screen you can see the reports folderFCReports
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
27/45
27
Step9: Click on FCReports folder as shown below where you could view the list of reports available.
Reports can be executed directly by clicking view link which is available below for the each Report
1.
2.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
28/45
28
3. Creating Data source
The following section describes how to create a Data source in BI Publisher application.
Step 1: Log in to BI Publisher Application using Administrator user
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
29/45
29
Step 2: The following screen will be appeared.
Click on Admin Tab.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
30/45
30
Step 3: Click on JDBC Connection.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
31/45
31
Step 4: Click on Add Data Source Button.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
32/45
32
Step 5: Following screen will be appeared.
Enter the details as below,
Data Source Name: INIT_DSN
And provide Connection String, Username and Password according to schema to which data source
refers.
And click on Testing Connection Button.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
33/45
33
Step 6: The following message will be appeared on the screen.
Click on Apply Button.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
34/45
34
Step 7: The data source will be appeared in the list as below.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
35/45
35
4. Creating Role and Users in BI Publisher :
The following section describes how to create a role in BI Publisher application and assigning new user to
roles.
2.1 Creating RolesStep 1: Open the BI Publisher Application
Step 2: Log in to BI Publisher Application using Administrator user
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
36/45
36
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
37/45
37
Step 3: Go to Admin Tab.
Step 4: Click on the Roles and Permissions link under Security Center.
Step 5: Click on Create Role button to create a new role for new user. Input the role name and click on
Apply to save. (Ex. FCJBIPRole)
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
38/45
38
Step 6: After creating the above role, select the folder permission for role.
Step 7: Select the FCReports folder from the left pane for which the above role has to be given access
and click on Add Folder
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
39/45
39
Click on apply to save the permission.
Step 8 : Select the Add data sources permission for the role
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
40/45
40
Step 9: Select the FCBIP data sources for which the above role to be assigned and click on Move
Click on Apply to save
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
41/45
41
2.2 Creating a user
Step 1: After applying the above permission for the role, click on Users tab
Step 2: Click on Create User button to create a new user
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
42/45
42
Step 3: Enter the User Id, Password for the new user and click on apply to save (say
FCJBIPUser/FCJBIPUser)
Step 4 : Now assign the required roles
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
43/45
43
Step 5: Click on Apply to finish creating the user.
Step 6: To test whether the user and roles are created, login to BI Publisher application using the new
user
After logging in the required folder should be available for the user.
2.3 FCUBS Property files Changes
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
44/45
44
This is taken care by the INSTALLER when the user creates the property file using Installer. But if theproperty files need to be modified manually then, encrypt the new BI Publisher user id and password andspecify it in the fcubs.properties file.
BIP Web services Reports Setup
7/30/2019 09-BIP Webservices Reports Setup
45/45
45
09-BIP_Webservices_Reports_Setup[April] [2011]
Oracle CorporationWorld Headquarters500 Oracle ParkwayRedwood Shores, CA 94065U.S.A.
Worldwide Inquiries:Phone: +1.650.506.7000Fax: +1.650.506.7200www.oracle.com/ financial_services/
Copyright 2007 2011Oracle Financial Services Software Limited. All rights reserved.
No part of this work may be reproduced, stored in a retrieval system, adopted or transmitted in any form or by any means,
electronic, mechanical, photographic, graphic, optic recording or otherwise, translated in any language or computerlanguage, without the prior written permission of Oracle Financial Services Software Limited.
Due care has been taken to make this document and accompanying software package as accurate as possible. However,Oracle Financial Services Software Limited makes no representation or warranties with respect to the contents hereof andshall not be responsible for any loss or damage caused to the user by the direct or indirect use of this document and theaccompanying Software System. Furthermore, Oracle Financial Services Software Limited reserves the right to alter,modify or otherwise change in any manner the content hereof, without obligation of Oracle Financial Services SoftwareLimited to notify any person of such revision or changes.
All company and product names are trademarks of the respective companies with which they are associated.