+ All Categories
Home > Documents > 1 2 Track Lighting€¦ · Spot LED track offers a full range of high performance accessories for...

1 2 Track Lighting€¦ · Spot LED track offers a full range of high performance accessories for...

Date post: 24-Aug-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
3
SpotLED-10W-track-LLABS 11/18 page 1 of 3 Project: Location: Cat.No: Type: Lamps: Qty: Notes: A high brightness LED track solution in a multi-optic LED design. Ideal for customers concern with energy, beam quality and visual performance. Multiple accessories available to customize the light output and visual appearance of the fixture. Track Lighting Spot LED LLABS 10W/600lm Complete unit Fixture + optional accessories Fixture example: LLABS30RSAL Series CCT Reflector Finish LLABS LLABS Spot LED 10W/600lm 27 2700 K 30 3000 K RS 9° Spot RNF 20° Narrow flood RF 36° Flood WH White AL Aluminum BK Black Accessories 1 example: LLABSAHBK Series Finish LLABSAH Accessory holder 2 WH Matte white BK Matte black 23SN30 Compatible Snoot WH Matte white BK Matte black AL Aluminum AF3 Compatible Diffusion Filters ADF3 Compatible Color Filters 3 AL3HC Compatible Hex cell louver (matte black) 1. Accessories are not Energy Star qualified. 2. Accessory holder accept two accessories. 3. Color filters will project colored light on ceiling. 2 1 2" 64 mm 1 1 2" 38 mm 6 7 8" 173 mm 1 3 8" dia. 35 mm 3 15 16" 100 mm 5 9 16" 141 mm 5 13 16" dia. 148 mm Ø 2 3 1 4 5 6 8 7 9 10 Features 1. Track attachment fitting: Molded polycarbonate. Integral color in gray, black or white. Rotates into track and locks into place with the use of push tab. 2. Push tab: Molded polycarbonate. Locks and detaches unit. 3. Track adapter housing: Die cast aluminum. Steel eyelet friction connection. Rotates 350°. 4. Movable contact: Solid Brass. Extends for connection to 2nd circuit in Advent track. 5. Ground contact: Solid Brass. 6. Vertical pivot mount: Stainless steel eyelet friction connection. Rotates +/- 90° from vertical aim to floor. 7. Driver housing: Extruded aluminum with die cast aluminum end caps. 8. Integrated heat sink: Die cast aluminum effectively cools LEDs providing a minimum 50,000 hour lifetime at 70% lumen maintenance. 9. Light source: 4 high brightness white led. 80-85 CRI, LEDs selected for tight color consistency between luminaires single 3-step MacAdam ellipse max. 10. Optic assembly: Efficient TIR (total internal reflection) optically clear thermoplastic lenses held securely by frosted translucent thermoplastic holder. Positive securement into luminaire with screws and accurately positioned on LEDs with locating pins. Prevents dust and contaminants from entering led compartment.
Transcript
Page 1: 1 2 Track Lighting€¦ · Spot LED track offers a full range of high performance accessories for tinting, coloring and shaping of the light beam. All accessories are designed to

SpotLED-10W-track-LLABS 11/18 page 1 of 3

Project:

Location:

Cat.No:

Type:

Lamps: Qty:

Notes:

A high brightness LED track solution in a multi-optic LED design. Ideal for customers concern with energy, beam quality and visual performance. Multiple accessories available to customize the light output and visual appearance of the fixture.

Track Lighting

Spot LED

LLABS 10W/600lm

2 1�2"64 mm

1 1�2"38 mm

6 7�8"173 mm

3 15�16"100 mm

1 3�8" dia.35 mm

5 9�16"141 mm

5 13�16" dia.148 mm

5 1�8"

130 mm

6 7�8"

173 mm

5 9�16"

141 mm

2 1�2"

64 mm 1 1�2"

38 mm

1 3�8"

35 mm5 13�16"

148 mm

3 15�16"

100 mmØ

Ø

Complete unitFixture + optional accessories

Fixture example: LLABS30RSAL

Series CCT Reflector Finish

LLABS

LLABS Spot LED 10W/600lm 27 2700 K30 3000 K

RS 9° SpotRNF 20° Narrow floodRF 36° Flood

WH White AL Aluminum BK Black

Accessories 1 example: LLABSAHBK

Series Finish

LLABSAH Accessory holder2 WH Matte whiteBK Matte black

23SN30 Compatible Snoot WH Matte whiteBK Matte black AL Aluminum

AF3 Compatible Diffusion Filters

ADF3 Compatible Color Filters3

AL3HC Compatible Hex cell louver (matte black)

1. Accessories are not Energy Star qualified. 2. Accessory holder accept two accessories. 3. Color filters will project colored light on ceiling.

2 1�2"64 mm

1 1�2"38 mm

6 7�8"173 mm

3 15�16"100 mm

1 3�8" dia.35 mm

5 9�16"141 mm

5 13�16" dia.148 mm

5 1�8"

130 mm

6 7�8"

173 mm

5 9�16"

141 mm

2 1�2"

64 mm 1 1�2"

38 mm

1 3�8"

35 mm5 13�16"

148 mm

3 15�16"

100 mmØ

Ø

2 1�2"64 mm

1 1�2"38 mm

6 7�8"173 mm

3 15�16"100 mm

1 3�8" dia.35 mm

5 9�16"141 mm

5 13�16" dia.148 mm

5 1�8"

130 mm

6 7�8"

173 mm

5 9�16"

141 mm

2 1�2"

64 mm 1 1�2"

38 mm

1 3�8"

35 mm5 13�16"

148 mm

3 15�16"

100 mmØ

Ø

2

3

1 45

6 8

7

9 10

Features1. Track attachment fitting: Molded

polycarbonate. Integral color in gray, black or white. Rotates into track and locks into place with the use of push tab.

2. Push tab: Molded polycarbonate. Locks and detaches unit.

3. Track adapter housing: Die cast aluminum. Steel eyelet friction connection. Rotates 350°.

4. Movable contact: Solid Brass. Extends for connection to 2nd circuit in Advent track.

5. Ground contact: Solid Brass.6. Vertical pivot mount: Stainless steel eyelet

friction connection. Rotates +/- 90° from vertical aim to floor.

7. Driver housing: Extruded aluminum with die cast aluminum end caps.

8. Integrated heat sink: Die cast aluminum effectively cools LEDs providing a minimum 50,000 hour lifetime at 70% lumen maintenance.

9. Light source: 4 high brightness white led. 80-85 CRI, LEDs selected for tight color consistency between luminaires single 3-step MacAdam ellipse max.

10. Optic assembly: Efficient TIR (total internal reflection) optically clear thermoplastic lenses held securely by frosted translucent thermoplastic holder. Positive securement into luminaire with screws and accurately positioned on LEDs with locating pins. Prevents dust and contaminants from entering led compartment.

Page 2: 1 2 Track Lighting€¦ · Spot LED track offers a full range of high performance accessories for tinting, coloring and shaping of the light beam. All accessories are designed to

SpotLED-10W-track-LLABS 11/18 page 2 of 3

LLABS Spot LED10W/600lm

1

2

3

4

5

Color filtersADF3 = 3 3/4" dia.

ElectricalElectronic power supply Input voltage: 120V, 50/60HzInput power: 9.9W (nominal)High power factor: >0.9 CRI: 85 (typical)Lumen maintenance: >70% of initial lumens @ 50,000 hours. Photometric performance: Tested in accordance to LM79.

4 LED array: 3000 K (Luxeon T)

Reflector Beam sprd Lms Efficacy CBCP

RSRNFRF

9°20°36°

643654629

646563

16,5863,4611,501

MountingLytespan Basic, Advent, Radius track, and monopoints. May be used with Lytespan to ProSpec adaptor 26075BK/WH when ProSpec track is preferred.

DimmingTrailing edge (ELV) dimming (refer to LED-DIM spec sheet for more details.)ZP425QE Lightolier Controls (28.4%)SELV-300P-WH Lutron Skylark (10.7%)IPE04-ILX Leviton Decora (7.2%)

FinishPowder coated finish.

LabelscULus listed. 5 year warranty.Energy Star qualified (standard product).

FR Frosted etched lens SB Steel blue

AS Beam elongator lens BA Bastard amber

SF Solite soft focus lens DA Daylight color correction

LF Light Frost LS Light straw

AL3HC only available in matte black

UV Optivex UV reduction by Bausch & Lomb

SP Surprise pink

Spot LED track offers a full range of high performance accessories for tinting, coloring and shaping of the light beam. All accessories are designed to attach easily. Acomplete accessory consists of a size and series suffix.

Example, AF3 + UV = AF3UV (3 3/4" UV Filter).

Primary colors Secondary colors

RD Red MM Medium magenta

BL Blue BG Blue green

GR Green YG Yellow green

MA Medium amber

Diffusion/special filtersAF3 = 3 3/4" dia.

Mixing colorsFilters shown together mix to white.

Hex cell louversAL3HC = 3 3/4" dia.

(color filters will project colored light on celing)

Accessories1. Fixture kit2. Diffusion filter3. Hex cell louver4. Snoot5. Accessory holder

Page 3: 1 2 Track Lighting€¦ · Spot LED track offers a full range of high performance accessories for tinting, coloring and shaping of the light beam. All accessories are designed to

© 2019 Signify Holding. All rights reserved. This document may be subject to change. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. All trademarks are owned by Signify Holding or their respective owners.

Signify North America Corporation 200 Franklin Square Drive, Somerset, NJ 08873 Telephone 855-486-2216

Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008

www.lightolier.com

LLABS Spot LED10W/600lm

SpotLED-10W-track-LLABS 11/18 page 3 of 3

Beam spread(To 50% CBCP)

CBCP Rated Life (Hrs.) D C FC L W D C FC L W D C FC L W D C FC L W

LLABS30RSSpot 9° 16,586 50,000

10'12'14'16'

0.0'0.0'0.0'0.0'

1661158565

1.7'2.1'

2.4'2.8'

1.7'2.1'

2.4'2.8'

10'12'14'16'

5.8'6.9'8.1'9.2'

108755542

2.3'2.8'3.3'3.7'

2.0'2.4'2.8'3.2'

4'5'6'7'

6.9'8.7'

10.4'12.1'

130835842

2.9'3.6'4.3'5.0'

1.4'1.7'2.1'

2.4'

5'6'7'8'

5.0'6.0'7.0'8.0'

23516312092

1.8'2.1'2.5'2.8'

1.2'1.5'1.7'

2.0'

D C FC L W D C FC L W D C FC L W D C FC L W

LLAB130RNFNarrow Flood 20° 3,461 50,000

5'6'7'8'

0.0'0.0'0.0'0.0'

1389671

54

1.9'2.3'2.7'3.1'

1.9'2.3'2.7'3.1'

5678

2.9'3.5'4.0'4.6'

90624635

2.6'3.1'3.7'4.2'

2.2'2.7'3.1'

3.6'

2345

3.5'5.2'6.9'8.7'

108482717

3.5'5.3'7.0'8.8'

1.6'2.3'3.1'

3.9'

2345

2.0'3.0'4.0'5.0'

3061367649

1.6'2.4'3.2'4.0'

1.1'1.6'2.2'2.7'

D C FC L W D C FC L W D C FC L W D C FC L W

LAB130RFFlood 36° 2,319 50,000

5'6'7'8'

0.0'0.0'0.0'0.0'

93644736

3.5'4.2'5.0'5.7'

3.5'4.2'5.0'5.7'

5678

2.9'3.5'4.0'4.6'

60423124

4.9'5.9'6.9'7.9'

4.1'4.9'5.7'6.5'

2345

3.5'5.2'6.9'8.7'

72321812

9.1'13.6'18.2'22.7'

2.8'4.2'5.7'7.1'

2345

2.0'3.0'4.0'5.0'

205915133

3.2'4.9'6.5'8.1'

2.0'3.0'4.0'5.0'

Aiming angleL and W are the outer points where the candle power drops to 50% of the maximum. FC are the initial foot-candles at the center of the beam. Data shown is for 3000K, for 2700K multiply FC by 0.91.

0° horizontal aiming angle 30° horizontal aiming angle 30° vertical aiming angle 45° vertical aiming angle

L = Beam lengthW = Beam widthD = DistanceA = Aiming angle

FC = FootcandlesC = Distance to

center beamCBCP = Center Beam

Candle Power


Recommended