Installation and Setup Instructions FAS2520 Systems Microsoft Windows client Runs the software to configure your storage system Screwdriver Additional network cables For connecting your storage to your network switch and Microsoft ® Windows ® client Rack space - 2U Download: You provide: • System Setup Software: http://support.netapp.com/NOW/public/system_setup/ • OnCommand System Manager: http://support.netapp.com/NOW/cgi-bin/software/ Prepare for installation 1 4 5 1 2 3 Power cables Configuration worksheet Serial cable not needed for this configuration Starter network and storage cables In the box:
Transcript
• System Setup information: http://support.netapp.com/NOW/public/system_setup/
• Controller and con�guration examples; Universal SAS and ACP Cabling Guide: https://library.netapp.com/ecm/ecm_download_�le/ECMM1280392
• OnCommand System Manager documentation set: http://support.netapp.com/documentation/productlibrary/index.html?productID=61372
• Data ONTAP 8 library: http://support.netapp.com/documentation/productlibrary/index.html?productID=30092
Cabling FAS2520 systems WITH external storageDS4246 disk shelves
Cabling FAS2520 systems WITH external storageDS2246 disk shelves
STOP HERE. If you have NO external storage, skip to .
Cable storage (Choose option A, B, or C below) 3
A
B
C
For additional con�gurations, see HELPFUL LINKS.
Single controller model Double controller model
1
2
AC AC1
2
AC AC
No additional cabling required for a single controller.
Single controller model Double controller model
1
2
AC AC1
2
AC AC
Single controller model Double controller model
1
2
AC AC1
2
AC AC
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
Network cables
2
1
3
4
Daisy chain SAS ports
Connect �rst SAS ports
Connect last SAS ports
Connect ACP ports on controllers to the disk shelves
Storage cables
1 2 3
Network cables
2
1
3
4
Daisy chain SAS ports
Connect �rst SAS ports
Connect last SAS ports
Connect ACP ports on controllers to the disk shelves
Storage cables
1 2 3
Connect SAS ports
Network cables
Connect ACP ports
2
Storage cables
Install hardware2 4 51 2 3
LIFTING HAZARDCAUTION
25 kg (55 lbs.)
• Rack the system. Rail kit: follow instructions in rail kit. OR System cabinet: install in system cabinet.
• Place the bezel over the front of the system.
Install system1
Cable controller for 7-Mode Data ONTAP or for switchless clustered Data ONTAP
2
DO NOT power on system at this point.
3 Connect both power cords
Power cords
Both power cords MUST be used for all units.
1
2
Use retaining clipsUse retaining clips
See your network administrator for help connecting to your switch.
Attach cable management arms.
Connect port e0c to the data switch.NOTE: Port e0c is required; other ports are available if needed.
Connect the wrench port to the management or subnet switch.
For option B onlyConnect port e0d to port e0d and e0f to e0f
Strap the cables to the cable management arms.
Network cables
Network cables
B4
5
1
2
3
If you are converting from a switchless to a switched con�guration, see the appropriate migration manual in the Cluster Management and Interconnect Switches library on the NetApp Support Site.
0a0b 0a0b
A
B
1
2
FRONT VIEW OF SYSTEM
PCM Attention LED
Console port (Setting: 9600 N-8-1)
SAS ports (2)
BACK VIEW OF SYSTEM
ACP port(locked wrench icon)
Gigabit Ethernet ports (2)
e0c - e0f 10 GbE Ethernet ports
One or two controller modules
10GbE switchless cluster
B A
B
A
B
5
1
1
2
AC AC
4
32
TO DATANETWORK SWITCH
TO MANAGEMENT NETWORK SWITCH
7-ModeA
32
A
B
A
B
5
1
1
2
AC AC
TO DATANETWORK SWITCH
TO MANAGEMENT SUBNET
FAS2520FAS2520
Shelf ID display
Attention LEDPower LED
Bezel
Power supply LEDs
A
B
1
2
A
Remote/Node Management port(wrench icon)
NVMEMLED
Network cables
4 51 2 3
Cabling FAS2520 systems with NO external storage
Cabling FAS2520 systems WITH external storageDS4246 disk shelves
Cabling FAS2520 systems WITH external storageDS2246 disk shelves
STOP HERE. If you have NO external storage, skip to .
Cable storage (Choose option A, B, or C below) 3
A
B
C
For additional con�gurations, see HELPFUL LINKS.
Single controller model Double controller model
1
2
AC AC1
2
AC AC
No additional cabling required for a single controller.
Single controller model Double controller model
1
2
AC AC1
2
AC AC
Single controller model Double controller model
1
2
AC AC1
2
AC AC
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
N
31
42
Disconnect allsupply power forcomplete isolation .
N
31
42
Disconnectallsupplypowerforcompleteisolation .
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
1
2
AC AC
IOM6
IOM6
LINK
LINK IOM6
IOM6
LINK
LINK
Network cables
2
1
3
4
Daisy chain SAS ports
Connect �rst SAS ports
Connect last SAS ports
Connect ACP ports on controllers to the disk shelves
Storage cables
1 2 3
Network cables
2
1
3
4
Daisy chain SAS ports
Connect �rst SAS ports
Connect last SAS ports
Connect ACP ports on controllers to the disk shelves
Storage cables
1 2 3
Connect SAS ports
Network cables
Connect ACP ports
2
Storage cables
Install hardware2 4 51 2 3
LIFTING HAZARDCAUTION
25 kg (55 lbs.)
• Rack the system. Rail kit: follow instructions in rail kit. OR System cabinet: install in system cabinet.
• Place the bezel over the front of the system.
Install system1
Cable controller for 7-Mode Data ONTAP or for switchless clustered Data ONTAP
2
DO NOT power on system at this point.
3 Connect both power cords
Power cords
Both power cords MUST be used for all units.
1
2
Use retaining clipsUse retaining clips
See your network administrator for help connecting to your switch.
Attach cable management arms.
Connect port e0c to the data switch.NOTE: Port e0c is required; other ports are available if needed.
Connect the wrench port to the management or subnet switch.
For option B onlyConnect port e0d to port e0d and e0f to e0f
Strap the cables to the cable management arms.
Network cables
Network cables
B4
5
1
2
3
If you are converting from a switchless to a switched con�guration, see the appropriate migration manual in the Cluster Management and Interconnect Switches library on the NetApp Support Site.
0a0b 0a0b
A
B
1
2
FRONT VIEW OF SYSTEM
PCM Attention LED
Console port (Setting: 9600 N-8-1)
SAS ports (2)
BACK VIEW OF SYSTEM
ACP port(locked wrench icon)
Gigabit Ethernet ports (2)
e0c - e0f 10 GbE Ethernet ports
One or two controller modules
10GbE switchless cluster
B A
B
A
B
5
1
1
2
AC AC
4
32
TO DATANETWORK SWITCH
TO MANAGEMENT NETWORK SWITCH
7-ModeA
32
A
B
A
B
5
1
1
2
AC AC
TO DATANETWORK SWITCH
TO MANAGEMENT SUBNET
FAS2520FAS2520
Shelf ID display
Attention LEDPower LED
Bezel
Power supply LEDs
A
B
1
2
A
Remote/Node Management port(wrench icon)
NVMEMLED
Network cables
• System Setup information: http://support.netapp.com/NOW/public/system_setup/
• Controller and con�guration examples; Universal SAS and ACP Cabling Guide: https://library.netapp.com/ecm/ecm_download_�le/ECMM1280392
• OnCommand System Manager documentation set: http://support.netapp.com/documentation/productlibrary/index.html?productID=61372
• Data ONTAP 8 library: http://support.netapp.com/documentation/productlibrary/index.html?productID=30092
