1

Configuration(1/8)

2

Configuration(2/8)

• Execute the windows HyperTerminal application and use D-SUB 9 pin RS-232 cable to set up

3

Configuration(3/8)

• Check the network status

4

• Web login : http://ip_address:9999 • Using the Windows Internet Explorer

Configuration(4/8)

5

Configuration(5/8) Management-General Setting

6

Configuration(6/8)User Setting-Network Setting

7

Configuration(7/8) Telnet

8

Configuration(8/8)Telnet

9

SIP Setting(1/3) User Setting-Call Setting

10

SIP Setting(2/3) Administrator Setting-Sip Setting

11

The fields those must configured Request - URI: Name displayed on the LCD for the

caller. (it is as same as SIP Display and SIP Request Name)

Login Name: User name to log in the SIP server. Password: User password to log in to the SIP server. Register Server IP Address: SIP Register Server IP

address. Register Server IP Address Port: Port number of SIP

Register Server. Outbound Proxy: Outbound Proxy server IP address. Outbound Proxy Port: Port number of Outbound Proxy

SIP Setting(3/3) Administrator Setting-Sip Setting

12

Dial Methods(1/5)Dialing Plan-General Setting

13

Dial Methods(2/5)Dialing Plan-Local

14

Mainly for IP call purpose Prefix: 1 Min Digit: 3 Max Digit: 3 Delete Digit: 0 Ex: 1xx Add Prefix: 9 Ex: 91xx Remote IP: 192.168.0.188 Ex: 91xx@192.168.0.188 Remote Port: 5060 Ex: 91xx@192.168.0.188:5060

Dial Methods(3/5)Example : Local table

15

Dial Methods(4/5)Dialing Plan-URI Phone Book

16

• Index1: 605 • Dial method: *#1 • Request URI =Sip: 605@registrar • Index2: 192.168.0.168 • Dial method: *#3 • Request URI =Sip: 192.168.0.168 • Index3: 605@192.168.0.168 • Dial method: *#3 • Request URI =Sip: 605@192.168.0.168

Dial Methods(5/5)Example : URI Phone Book