Date post: | 18-Jan-2015 |
Category: |
Education |
Upload: | algunastecnocosas |
View: | 3,610 times |
Download: | 2 times |
1
STRUCTURES2nd part
Types of structures
Technologies1st year ESO
Types of structures
1. MASS STRUCTURES
1. Mass structures
They can be made by, piling up or forming similar materials into a particular shape or design.
Sand castles, dams and brick walls are manufactured mass structures.
Advantages: They are hold in place by their own weight. Losing small parts often has little effect on the overall strength of the structure.
Types of structures
2. FRAME STRUCTURES
2. Frame Structures
They have a skeleton of strong materials, which is then filled and covered with other
materials, supporting the overall structure. Most of the inside part of the structure is
empty space.
Buildings made of steel beams and columns are an example of frame structures.
Sometimes the columns and beams are made of reinforced concrete instead of steel.
Concrete is a mixture of cement and stone
aggregate and mixed with a small amount of
water. When steel bars are placed in concrete,
the composite material is called reinforced
concrete. It resists compression and bending.
Types of structures
2. FRAME STRUCTURES
Types of structures
3. TRUSSES
3. Trusses
Trusses are frame structures formed by triangles.
The triangle is the most rigid frame structure and many complex structures are based
on triangles. The technique used in these type of structures is called triangulation.
When forces are applied to a simple four-sided structure, it can be forced out of shape. A structure which behaves in this way is said to be non-rigid
By adding an extra bar the structure can no longer be forced out of shape, and is said to be rigid.
The effect is known as triangulation
Types of structures
3. TRUSSES
Types of structures
4. SHELL STRUCTURES
4. Shell Structures
Structures, which keep their shape and support loads, even without a frame, or solid mass material inside, are called shell structures. These structures use an outer layer of material to provide their strength and rigidity. The shape of a shell structure spreads forces throughout the whole structure, which means every part of the structure supports only a small part of the load, giving it its strength.Examples include: egg cartons, water containers, gas tanks and cars
Types of structures
5. SUSPENSION STRUCTURES5. Suspension structures Suspension structures are those with horizontal planes (road decks, roofs, and even floors) supported by cables (hangers). Suspension bridges are good examples of these structures. In these bridges, cables suspended via towers hold up the road deck.
Types of structures
6. VAULTED STRUCTURES6. Vaulted structuresVaulted structures are those formed with arches. They are usually used to provide a big space with a ceiling or roof. The weight of the ceiling is conducted through the vault into the pillars (or columns) that are supporting it, and from those pillars into the foundation of the building.
Different shapes in the vaulted structures have been used through history and depending on the different cultures.
Types of structures
7. GEODESIC STRUCTURES7. Geodesic structuresGeodesic structures (usuaslly called geodesic domes) are a kind of shell structures in which the shell is formed by polygons (usually triangles).
Types of structures
Think about the type of the structure of the following buildings/objects and what advantages it has
Mass structure
Mass structure
Mass structure
Vaulted structure
Vaulted structure
Vaulted structure
Vaulted structure
Frame structure
Frame structure
Frame structure
Frame structure
Shellstructure
Shellstructure
Shellstructure
Trusses
Trusses
Trusses
Suspension structure
Suspension structure
Suspension structure
Which type of structure is each of the following
pictures?
Take it down in your notebook