Date post: | 28-Oct-2015 |
Category: |
Documents |
Upload: | imdigesac-eneque |
View: | 393 times |
Download: | 43 times |
La VEI S.p.A. si riserva il diritto di apportare, in qualsiasimomento, eventuali modifiche per motivi di carattere tecnicoo commerciale; pertanto i dati e le illustrazioni contenute inquesta pubblicazione sono aggiornate fino al momento del-l’approvazione per la stampa.
VEI reserves the right to carry out, without any prior notice,any modifications it deems necessary in order to improve andmeet any construction requirement. Therefore, the data andillustrations in this publication are updated up to the point ofapproval for printing.
ISARC
DescrizioneDescription
CaratteristicheCharacteristics
AccessoriAccessories
Dimensioni/VersioniDimensions/Versions
1
2
3
4
ISARC-ISARC PISARC-ISARC P
ISARC
DescrizioneDescription1
Interruttore di manovra sezionatoretipo ISARC
Switch disconnector ISARC type
Quadro UNISARC con interruttore di manovrasezionatore tipo ISARC
UNISARC switchboard with switch disconnectorISARC type
DescrizioneDescription
ISARC
1
1
Generalita’ 2Campi d’impiego 2-3Certificazioni 4Rapporti di prova 5Normative 5Sistema qualita’ 5-6
General information 2Methods of use 2-3Certifications 4Test reports 5Standards 5Quality system 5-6
ISARC
DescrizioneDescription1
2
GENERAL INFORMATIONThe switch disconnectors seriesISARC are increasingly adopted inMV installations, owing to their supe-rior interrupting features and to theircapability to withstand the short-cir-cuit currents which occur mainly asconsequences of faults in distribu-tion networks. The versions combi-ned with HRC fuses are particularlysuitable for the protection of distri-bution transformers up to 1250 kVAThe use of ISARC, designed forinstallation in compartmented swit-chboards have the following advan-tages:- Full segregation between the bus-bar compartment and the cablecompartment, with switch discon-nector in both "closed" and "open"position.- Full metallic segregation betweenbus-bar compartment and cable co-mpartment, with the switch discon-nector open and the earthing switch(ES) closed.- The moving contact, of the slidingvertical type, can be easily checkedand cleaned with live bus-bars andearthing switch (ES) closed.- All segregations are positive, be-cause it is not possible to opera tethe moving contacts with switchdisconnector open and (ES) closed.Therefore in this situation, it is possi-ble to operate on cables and fuses inabsolutely safe conditions, even withlive bus-bars.- The same supporting frame is usedfor all switch disconnector versions,which eases the installation and theassembly of the cubicles.- No adjustment is needed in thetripping mechanism of the switch-fuse combination and of the ES: theyare built together in a single unit,which is adjusted and checked du-ring assembly in the factory, beforethe final test.
METHODS OF USEThe switch disconnector seriesISARC can be used for both swit-ching and protection of:– off-load/on load transformers– off-load/on load cables and over-
head lines– capacitor banks– ring circuits.ISARC switch disconnector is theresult of a wide and deep experiencematured in the manufacturing ofswitches and switchboards. ISARCswitch disconnector solves in an ea-
GENERALITA’Gli interruttori di manovra-sezionato-ri ISARC, sono sempre più impiegatinegli impianti di M.T. per le elevatecaratteristiche elettriche e per lasicurezza degli impianti contro guastidi qualsiasi origine o natura. La ver-sione combinata con fusibili offre ele-vate prestazioni e garanzie per laprotezione di trasformatori fino a1250 kVA. I vantaggi dell’impiego iIMS tipo ISARC per montaggio inquadro sono i seguenti:- Completa segregazione tra il vanosbarre ed il vano cavi sia in posizio-ne di IMS aperto che chiuso.- Totale segregazione metallica tra ilvano sbarre ed il vano cavi con IMSaperto e sezionatore di terra chiuso.- Il contatto mobile a traslazione ver-ticale offre la possibilità di eseguire ilcontrollo e l’eventuale pulizia dellostesso con sbarre in tensione esezionatore di terra chiuso.- Nessuna possibilità di muovere icontatti mobili con IMS in posizionedi aperto con ST chiuso (segregazio-na chiusa). In queste condizioni sipossono eseguire manutenzioni suicavi o sui fusibili in assoluta sicurez-za anche con sbarre intensione.- Unico telaio di supporto IMS pertutte le versioni, pertanto facilità diinstallazione e costruzione scompar-to.- Nessuna regolazione sui cinemati-smi di apertura IMS con fusibile e sulsezionatore di terra, in quanto forma-no un unico blocco, la loro regolazio-ne si esegue in fabbrica in fase dimontaggio prima del collaudo delsezionatore.
CAMPI DI IMPIEGOGli interruttori di manovra-sezionato-ri ISARC possono essere impiegatiper la manovra e per la protezione di:- trasformatori con e senza carico- cavi e linee aeree a vuoto e sotto-
carico- batterie di condensatori- linee ad anello.Gli interruttori di manovra-sezionato-ri ISARC, sono il risultato di unavasta e profonda esperienza matura-ta per anni, nel campo della costru-zione degli apparecchi e dei quadri.
DescrizioneDescription
ISARC
1
3
and effective way the problembetween panel compartments, allo-wing for the complete safety of theoperator. ISARC switch disconnec-tor doesn’t need to move big inertialmass. All the locking devices aredirectly connected to the switchdisconnector operating mechanism.These characteristics will be apprec-ciated by the switchboard manufac-turers and end users as time and dif-ficulty of installation are noticallyreduced with respect to other solu-tions. Furthermore the end user willalso apprecciate the fact that theycan rely on a simple, safe and robustapparatus, highlighted by numeroustype tests.
Essi risolvono in modo semplice edefficace il problema della separazio-ne tra gli scomparti in piena sicurez-za per l'operatore. Il sezionatore nonrichiede la messa in movimento dinotevoli masse rotanti.I blocchi sonotutti realizzati sul meccanismo dicomando dell'apparecchio. Questecaratteristiche sa-ranno certamenteapprezzate dai costruttori dei quadri,in quanto il tempo e le difficoltà diinstallazione risultano notevolmenteridotti rispetto ad altre soluzioni masaranno anche apprezzate dagliutenti i quali sanno di poter contaresu un apparecchio semplice, sicuro erobusto, come hanno largamentemesso in evidenza le numeroseprove.
ISARC
DescrizioneDescription1
4
CERTIFICAZIONICERTIFICATIONS
Rapporto N° Modello Descrizione Data test IstitutoReport N° Model Description Test date Institute
GPS - 006 ISARC 1 Conformità alle norme IEC 265 (1968) e IEC265/6 (1970). Feb-81 CESIFeb-81
GPS - 006B ISARC 1 Interruzione di trasformatori a vuoto interruzione di cavi a vuoto. Feb-81 CESIFeb-81
AT 3490 CAMPANA 24 KV Verifica dell’andamento delle correnti superficiali interne ed esterne in nebbia salina. Feb-81 CESIFeb-81
AT 3484 CAMPANA 24 KV Verifica dell’andamento delle correnti superficiali interne ed esterne in nebbia salina. Apr-81 CESIApr-81
GPS - 440 ISARC 1-04 Chiusure su C.to C.to con 50 (55) kA n°2. Mar-83 CESIMar-83
GPS - 439 ISARC 1P-02 24 kV Three phase short-time current making test. Mar-83 CESIMar-83
AT- 3861/B ISARC P1-02 Secondo tabella ENEL DJ 1203 (invecchiamento). Apr-83 CESIApr-83
AT - 4743/A ISARC 1/EV Secondo tabella ENEL DJ 1203 - DY 1511 IEC 932 (invecchiamento). Nov-87 CESIISARC 1P-E/V Nov-87
AT - 4743/B ISARC 1P-02 Secondo tabella ENEL DJ 1203 - DY 1511 IEC 932 (invecchiamento). Nov-87 CESIISARC 1-04 Nov-87
AT - 4743/C ISARC 1P-02 36 kV Prova in nebbia salina. Nov-87 CESINov-87
GPS - 1667 ISARC 1-04 Short circuit making test. Short-time current test. Gen-88 CESIJan-88
GPS - 1666 ISARC 1P-02 36 kV N° 25 C. 400 A - N° 4 CO 31,5 kA. Gen-88 CESIJan-88
GPS - 1712 ISARC 1-04 Short circuit making test - Short-time current test on associate earthing switch N.B. Il. Apr.88 CESIApr.88
GPS -91/007730 ISARC 6-04 Three phase short time and peak withstand current test. Mar-91 CESIThree phase short-time current making test. Mar-91
27025 ISARC 1-E Verifica del comportamento alla corrente di breve durata nominale ammissibile Giu-91 G.FERRARISe alla corrente nominale ammissibile di cresta. Jun-91
27025/1 ISARC 3-04 Verifica del comportamento alla corrente di breve durata nominale ammissibile Giu-91 G.FERRARISe alla corrente nominale ammissibile di cresta. Jun-91
GPS-95/016768 ISARC 2-12 IEC 265-1(1983) - IEC 420 (1990). Apr-95 CESIApr-95
GSP -94/035937 ISARC 2-E Prove simulante la vita elettrica di 10 anni di servizio set-95 CESI. Set-95 CESI24kV-400A Sep-95
GPS -97/004816 ISARC 1-04 ANSI C37.71 - 1984. Gen-97 CESIJan-97
CERT-97/005791 ISARC 1-04 CERTIFICATO DI CONFORMITA' RELATIVO A GPS - 97/002840. Apr-97 CESIApr-97
GSP-97/037215 ISARC 2-12 Single-capacitor bank current switching test. [IEC 265-1 (1983) - IEC 56 (1987)] Gen-98 CESISingle capacitor bank breaking current : 40A at 17,5kV. Jan-98
GSP-97/037216 ISARC 2-12 Single-capacitor bank current switching test. [IEC 265-1 (1983) - IEC 56 (1987)] Gen-98 CESISingle capacitor bank breaking current : 170A at 17,5kV Jan-98
GSP-98/002737 ISARC 2-12 Single-capacitor bank current switching test. [IEC 265-1 (1983) - IEC 56 (1987)] Gen-98 CESISingle capacitor bank breaking current : 150A at 17,5kV Jan-98
SJ/Op/190798 ISARC 1-2 Product certification POLISH. Lug-98 ENERGOPOMIARUNISARC Jul-98
96280 ISARC 2-12 Air switch (including fuse) ISARC [IEC 265-1 (1983) - IEC 420 (1990)]. Lug-96 XIAN INST.CHINAJul-96
96279 ISARC 1-04 Air switch ISARC [IEC 265-1 (1983)]. Lug-96 XIAN INST.CHINAJul-96
643.LLI.120A.93 ISARC P Complete cycle tests. Certification in compliance with CHINESE Standard. Dic-95 LMK JAKARTADec-95
(95)-132 ISARC Complete cycle tests. Certification in compliance with CHINESE Standard. Dic-95 BEIJING CHINADec-95
DescrizioneDescription
ISARC
1
5
TEST REPORTSISARC switch disconnectors havesuccessfully passed all the type testsrequested by the internationalStandards (IEC, VDE, CEI, CINESEGB 3804-90) in officially acknowled-ged testing laboratories.
STANDARDSISARC switch disconnectors complywith the international Standards IEC602651, 420, 129, and 694, withANSI standard C 37 and to ENELspecifications DY 500.
QUALITY SYSTEMThe Quality Assurance System ensu-res that the whole manufacturingprocess conforms to a high and con-stant quality level. Before being deli-vered, each switchboard or cubicleis carefully tested and checked in thefactory testing laboratories as re-gards both its mechanical and elec-trical features. These tests includethe routine tests, which are prescri-bed in compliance with the CEI 17-6IEC 298 Standards.
RAPPORTI DI PROVAGli interruttori di manovra sezionato-ri ISARC hanno positivamente su-perato in laboratori ufficiali tutte leprove di tipo in accordo alle Normeinternazionali (IEC, VDE, CEI, CI-NESE GB 3804-90).
NORMATIVE Gli interruttori di manovra-sezionato-ri ISARC sono conformi alle normati-ve internazionali 602651 - 129 - 420- 694, alle normative ANSI C37 edalle specifiche ENEL DY 500.
IL SISTEMA DI QUALITA’Il sistema di controllo qualità assicu-ra che l’intero processo di produzio-ne mantenga un livello qualitativa-mente alto e costante. Prima dellafornitura ciascun quadro é sottopostoin fabbrica a minuziose prove e con-trolli sia di tipo meccanico sia di tipoelettrico.Incluse le prove di accetta-zione previste dalle normative CEI17-6 IEC 298.
ISARC
DescrizioneDescription1
6
Enviromental Managenment System certified by RINA in com-pliance with ISO 14001 standards.
Certificazione del Sistema di Gestione dell’Ambiente certifica-to dalla RINA in conformita’ alle norme Standard UNI EN ISO14001.
Quality Assurance System certified by RINA in compliancewith ISO 9001:2000 standards.
Certificazione del Sistema di Assicurazione Qualita’ certificatodalla RINA in conformita’ alle norme Standard UNI EN ISO9001:2000.
ISO 9001:2000ISO 9001:2000
ISO 14001ISO 14001
CaratteristicheCharacteristics
ISARC
2
7
Caratteristiche elettriche 8Interruttore manovra sezion. 9Caratteristiche generali 10Caratteristiche costruttive 12Caratteristiche funzionali 14
Electrical features 8Switch disconnector 9Main features 10Constructional features 12Functional features 14
ISARC
CaratteristicheCharacteristics2
8
CARATTERISTICHE ELETTRICHEELECTRICAL FEATURES
Tensione nominale Ur[kV] 12 17,5 24Rated voltage
Tensione di tenuta a frequenza industriale (50/60 Hz 1 min):Power frequency withstand voltage (50/60 Hz 1 min):
a) verso massa e tra le fasi b) attraverso la distanza d’isolamento (contatti aperti) [kV] a)=70 b)=80a) to earth and between phases b) across isolation (contacts open)
Tensione di tenuta ad impulso:Impulse withstand voltage:
a) verso massa e tra le fasi b) attraverso la distanza d’isolamento (contatti aperti) [kV] a)=170 b)=190a) to earth and between phases b) across isolation (contacts open)
Tensione di tenuta ad impulso verso massa e tra le fasi Up[kV] 75 95 125Impulse withstand voltage to earth and between phases
Corrente nominale In[A] 400-630 400-630 400-630Rated current
Potere di interruzione di circuiti attivi (cos ø 0,7) e circuiti ad anello a tensione 0,3 Vn Isc[kA] 400-630 400-630 400-630Breaking capacity of active circuits (cos ø 0.7) and ring circuits at 0.3 Vn
Potere di interruzione di trasformatori a vuoto Isc[kA] 25 25 25Breaking capacity of no-load transformers
Potere di interruzione di linee e cavi a vuoto Isc[kA] 25 25 25Breaking capacity of no-load lines / cables
Potere di interruzione su guasto a terra Isc[kA] 200 200 200Earth fault breaking capacity
Potere di interruzione su guasto a terra di cavi o linee a vuoto Isc[kA] 50 50 50Cable and line-charging breaking current under earth fault condition
Corrente di trasferimento In[A] 1700 1250 800Transfer current
Corrente di breve durata - 1 sec. Ik[kA] 12,5-25 12,5-25 12,5-25Short time withstand current - 1 sec.
Corrente di breve durata - 3 sec. (°) Ik[kA] 12,5-20 12,5-20 12,5-20Short time withstand current - 3 sec.
Potere di chiusura [kA] 31,5-62,5 31,5-62,5 31,5-62,5Making capacity
(°) Per prestazioni superiori chiedere alla VEIFor higher performance ask VEI
CaratteristicheCharacteristics
ISARC
2
9
SWITCH DISCONNEC-TOR AND EARTHINGSWITCHThe UNISARC switchboard seriesmake use of the ISARC switchdisconnector to the sliding verticaltype. The ISARC switch disconnectorsseries are separated poles three-pole apparatus. Mounted on a singleframe made of properly bent sheetsteel to obtain the utmost stiffness,on which 6 cycloaliphatic epoxyresin cylinders supporting the inter-ruption unit are accommodated.The open/close mechanical sequen-ces are operated by:- switch disconnector operating
shaft (ref.4)- earthing switch shaft (ref.5)(witch are suitably interlocked)
INTERRUTTORE DI MANO-VRA E SEZIONATORE DITERRATutti gli scomparti della serie UNI-SARC utilizzano un interruttore dimanovra sezionatore di tipo ISARC atraslazione verticale. Gli interruttori dimanovra sezionatori della serieISARC sono apparecchi tripolari, apoli separati, montati su un unicotelaio in lamiera di acciaio prezincatoopportunamente piegata per conferi-re al complesso la massima rigidita’,sul quale trovano alloggio 6 isolatoriin resina epossidica cicloalifaticadestinati a sostenere il gruppo diinterruzione. La sequenza delle ope-razioni di chiusura e apertura avvie-ne meccanicamente tramite:- albero di comando dell’interruttore
di manovra sezionatore (rif.4)- albero sezionatore di terra (rif.5)(opportunamente interbloccati)
1 - Upper bell insulator2 - Upper terminal3 - Lower insulator4 - Switch disconnector operating
shaft5 - Earthing blades shaft6 - Nozzle 7 - Moving contact cylinder8 - Frame9 - Earthing blades10 - Earthing fixed contact11 - Fixed cylinder 12 - Operations
1 - Isolatore superiore a campana2 - Terminale superiore3 - Isolatore inferiore4 - Albero di comando dell’IMS5 - Albero coltelli di terra6 - Ugello7 - Cilindro contatto mobile8 - Telaio9 - Coltelli di terra10 - Contatto fisso di terra11 - Cilindro fisso 12 - Gruppo manovre
1
410 59
2 8
3
6
7
12 11
ISARC
CaratteristicheCharacteristics2
10
MAIN FEATURES
In the switch disconnectors seriesISARC and ISARC P the movingcontacts operate vertically, and inter-ruption is caused by their quickseparation under a blow of compres-sed air, created by a fixed pistonmounted in the lower part of thepole: this blow of air impacts ontothe electric arc, with a strong deioni-sation effect which quenches the arcwithin a few milliseconds from themoment of contact separation. Thegreat effectiveness of the interrup-tion is due to the specific shape ofthe blowing nozzle, which preventsthe arc from wandering in the inter-ruption gap, and delivers a precisestream of compressed air onto thefixed contact in the exact momentwhen it leaves the nozzle. A secondimportant element contributing to aperfect control of the arc is the spe-cial shape of the upper insulator, cal-led "bell insulator", inside whichoperates both the fixed and themoving contacts, perfectly alignedwith each other: at the moment ofthe interruption, the arc is positively"held" inside the bell insulators, sothat no risk occurs that may wandertoward one of the other phases.During the interruption, therefore,the three phases remain perfectlyisolated one from the other: this fact,joined with the duration of the airblow (injected on the arc along thewhole contact stroke), enables theswitch disconnector series ISARC tointerrupt inductive currents of manyAmpere, as well as normal currentsof many hundreds of Ampere, withthe introduction in the circuit of alarge arc resistance which ensuresthat no dangerous overvoltages arecreated and let through to cablesand machines. This system of auto-compression of the air enables theswitch disconnector series ISARC tocarry out many hundreds of interrup-tions, without requiring any kind ofservice or maintenance, unlike othertypes of switches, using gas auto-generating components. Moreover,the light weight of the moving ele-ments enables the LBS series ISARCto attain a high number of mechani-cal operations, without evidencingmechanical problems.
CARATTERISTICHE GENE-RALINegli interruttori di manovra-seziona-tori ISARC e ISARC-P progettati conmovimento dei contatti a traslazioneverticale, l'interruzione avviene perdistacco veloce dei contatti unita-mente ad un soffio d'aria compressache investe l'arco elettrico lo deioniz-za ed interrompe in pochi millisecon-di. La particolare forma dell'ugello disoffio non permette deformazioneall'arco elettrico e nello stesso tempoindirizza il getto d'aria sul contattod'arco fisso nel momento in cui que-sti esce dall'ugello. Il movimentolineare del contatto mobile perfetta-mente in asse con contatto fisso, e laparticolare forma dell'isolatore supe-riore (campana) non consentonodeformazioni all'arco elettrico pertan-to le tre fasi nel momento dell'interru-zione sono separate fisicamente.La separazione fisica delle fasi unita-mente al getto d'aria compressa chepermane per tutta la corsa del con-tatto mobile permette l'interruzione dicorrenti induttive sia modeste cheelevate senza provocare sovraten-sioni pericolose per i cavi.Questo sistema ad autocompressio-ne dell'aria permette di effettuaremolte centinaia di interruzioni senzamanutenzione alcuna. Il peso limitatodella massa in movimento consentedi effettuare diverse migliaia dimanovre senza problemi meccanici.
CaratteristicheCharacteristics
ISARC
2
11
POLE SECTION VIEW, ISARC SWITCH DISCONNECTOR
WITH FUSE
VISTA IN SEZIONE DI UNPOLO DELL’INTERRUTTOREDI MANOVRA SEZIONATORE
ISARC CON FUSIBILE
1. Upper bell insulator2. Upper terminal3. Upper fixed contact4. Contact fingers5. Arcing contact rod6. Lower insulator7. Lower terminal8. Moving contact cylinder9. Guiding tulip contact10. Insulating connecting rod11. Operating shaft12. Cylindrical insulating element13. Earthing blades shaft14. Earthing blades15. Fixed contact16. Fixed piston17. Nozzle18. Moving arcing contact19. Rod20. Hinged shutter21. Field equalizing ring22. Shock absorber
1. Isolatore superiore a campana2. Terminale superiore3. Contatto fisso superiore4. Dita di contatto5. Asta di contatto d’arco6. Isolatore inferiore7. Terminale inferiore8. Cilindro del contatto mobile9. Contatto guida a tulipano10. Biella isolante11. Albero di comando12. Elemento isolante cilindrico13. Albero coltelli di terra14. Coltelli di terra15. Contato fisso16. Pistone fisso17. Ugello18. Contatto d’arco mobile19. Asta20. Serranda articolata21. Anello di drenaggio22. Ammortizzatore
4
5
1
17
19
9
7
8
22
2
3
21
20
18
6
16
11
1013141215
ISARC
CaratteristicheCharacteristics2
12
CONSTRUCTIONAL FEA-TURESThe ISARC, switch is available in twomodels:1. Panel mounting version in the fol-lowing types:- ISARC 1 Switch disconnector
- ISARC 2 Fuse-switch disconnector
- ISARC 3 Off-load disconnector
- ISARC 4 Off-load disconnector co-mbined with fuses;- ISARC ST Earthing Switch with/without making capability
2. Wall mounting version ISARC-P inthe following types:- ISARC P1 Switch disconnector
- ISARC P2 Fuse-switch disconnec-tor- ISARC P3 Off-load disconnector
- ISARC P4 Off-load disconnectorcombined with fuses
The upper bell insulator (1) supports,on its outside, the main upper termi-nal (2) and, on its inside, the fixedcontact (3), consisting of the contactfingers (4) and of the contact rod (5).With the LBS in open position, thebell insulator is shut by a hingedshutter (20), actuated by the shaft(13) of earthing switch together withthe blades of same, thus achieving acomplete and reliable segregation ofthe live parts. This is the most promi-nent feature of the LBS seriesISARC, covered by the patent n.26743A-79.The lower insulator (6) supports thelower terminal (7), the moving contact cylinder (8) and the guidingtulip contact assembly (9), whichensures the electrical connection tothe terminal (7). The cylinder perfor-ming the function of moving contact(8) is actuated by an insulating rod(10), in thermoplastic material, keyedon the drive shaft (11) through thecylindric insulating element (12),which slides internally to the rod (10).The earthing blades, keyed on theshaft (13), close onto the fixed con-tacts (15) fixed to the lower part ofthe body of the fixed cylinder andterminal connection of the cable.
CARATTERISTICHE COS-TRUTTIVEL’interruttore di manovra-sezionatoreISARC é disponibile in due versioni:1. Versione per montaggio in quadronelle seguenti tipologie:- ISARC 1 sezionatore sottocarico,senza fusibili- ISARC 2 sezionatore sottocarico,con fusibili- ISARC 3 sezionatore a vuoto,senza fusibili- ISARC 4 sezionatore a vuoto, confusibili- ISARC ST sezionatore di messa aterra con/senza potere di chiusura
2. Versione per il montaggio a pareteISARC-P nelle seguenti tipologie:- ISARC P1 sezionatore sottocarico,senza fusibili- ISARC P2 sezionatore sottocarico,con fusibili- ISARC P3 sezionatore a vuoto,senza fusibili- ISARC P4 sezionatore a vuoto, confusibili
L’isolatore superiore a campana (1)sostiene all’esterno il terminale supe-riore (2) e all’interno il contatto fissosuperiore (3) costituito dalle dita dicontatto e dall’asta di contatto d’arco(5). Ad apparecchio aperto essoviene completamente chiuso da unaserranda articolata (20) azionataconteporaneamente dall’albero dimanovra (13) dei coltelli di terra, ilche consente la segregazione totalee sicura delle parti in tensione.Questa é la caratteristica saliente edé coperta dal brevetto n° 26743A-79.L’isolatore inferiore (6) sostiene il ter-minale inferiore (7), il cilindro delcontatto mobile (8) ed il complesso dicontatto guida a tulipano (9) cheassicura la continuità elettrica con ilterminale.Il cilindro che funge da contattomobile (8) é azionato da una biellaisolante (10) in materiale termoplasti-co, calettata sull’albero di comando(11) attraverso l’elemento isolantecilindrico che scorre all’interno dellabiella. I coltelli di terra (14) calettatisull’albero (13) si chiudono sul conta-to fisso (15) applicato nella parteinferiore del corpo di sostegno delcilindro fisso che é predisposto per ilcollegamento al terminale di cavo.
CaratteristicheCharacteristics
ISARC
2
13
CLOSING OPERATIONThe cylinder acting as moving con-tact (8), sliding in the guiding fixedcontact assembly (9) is pushedupwards by the insulating rod (10)and by the sliding element (12): theclosing of the contacts is very fast,so that the risk of an arc reignition isnegligible.
OPENING OPERATIONThe cylinder acting as moving con-tact (8), actuated by the rod (10) andby the sliding element (12), is pusheddownwards against the fixed piston(16) and causes the compression ofthe air, which is forced through thenozzle (17) and quenches the arc ori-ginated between the fixed arcingcontact (5) and the moving one (18),both made of a sinterized alloy Cu-W. The damping action on the cylin-der (8) is supplied by the compres-sed air, the exit of which from thecylinder, in the last part of the stroke,is obstructed by the rod (19), whichshuts the nozzle (17), and by theshock absorber (22), made of anti-bouncing material.
CHIUSURAIl cilindro che funge da contattomobile (8) che scorre ne complessodi contatto guida fissa (9) è spintoverso l'alto dalla biella isolante (10) edall'elemento scorrevole (12); lachiusura dei contatti è molto rapida,pertanto le conseguenze di adesca-mento dell'arco non sono apprezza-bili.
APERTURAIl cilindro che funge da contattomobile (8) sempre azionato dallabiella (10) e dall'elemento scorrevole(12) è spinto verso il basso rispetto alpistone fisso (16) e provoca la com-pressione dell'aria che viene forzataattraverso l'ugello (17) ed estinguel'arco adescatosi fra il contatto d'arcofisso (5) e mobile (18) protetti da legasinterizzata rame-tungsteno.L'ammortizzazione del cilindro (8) èdata dalla compressione dell'aria lacui uscita dal cilindro, nell'ultimaparte della corsa, è impedita dall'asta(19) che chiude l'ugello (17) e dal-l'ammortizzatore (22) in materialeantirimbalzo.
4
5
1
17
19
9
7
8
22
2
3
21
20
18
6
16
11
1013141215
ISARC
CaratteristicheCharacteristics2
14
FUNCTIONAL FEATURES
CINEMATIC MOTIONThe energy necessary to bring themoving contacts of the switchdisconnector from one status to theother is supplied by a group ofsprings, which are compressed bythe action of the operator (or of thespring loading motor): once thehinge point of the springs has over-come the dead center, the springsare released to perform the closingor opening operation. The operatingmechanisms used for the ISARCseries are the following 3 types:
TYPE 1The switch disconnector closes andopens with a speed which is inde-pendent from the action of the ope-rator. By rotating the operating shaftclockwise, closing springs are loa-ded and store the energy, which afterthe dead center is released onto thecontact shaft, which closes the LBS,while the springs get discharged. Toopen the LBS, the opposite opera-tion has to be carried out, by rotatingthe operating shaft anticlockwise.
TYPE 3 The switch disconnector closes andopens with a speed independentfrom the operator. By rotating theoperating shaft clockwise, energy isstored both in the closing spring andin the opening spring: over the deadcenter, the energy of the closingspring is released onto the contactshaft, thus closing the switchdisconnector. The energy accumula-ted in the opening spring remainsstored, until it is released to open theswitch disconnector (either throughthe operating handle, or by a fusestriker, or by the shunt trip coil).
MECHANISM FOR EARTHINGSWITCHThe mechanism of the ES has aspeed dependent on the operator.The closing operation is performedby rotating the shaft clockwise, whe-reas the opening is obtained by rota-ting it anticlockwise. The operatingshaft of the ES is mechanically con-nected with the metallic segregationshutter, so that this latter is operatedsimultaneously with the earthing bla-des. In case of earthing switch withmaking capacity, the closing move-ment is allowed by spring overco-ming dead point quick release.
CARATTERISTICHE FUN-ZIONALICINEMATISMIL'energia per la traslazione dei con-tatti da uno stato all'altro é assicura-ta da un gruppo di molle che vengo-no compresse dall'operatore o dalmotore, al superamento del puntomorto si provoca la chiusura o aper-tura dei contatti. I cinematismi princi-palmente usati sono di tre tipi.
CINEMATISMO TIPO 1L'IMS chiude o apre in modo indi-pendente dalla velocita' dell'operato-re. Operando sull'albero di comandocarica molle in senso orario s'imma-gazzina energia sulle molle, supera-to il punto morto, le molle rilascianol'energia all'albero di movimento con-tatti provocando la chiusura deglistessi e lo scarico delle molle. Pereseguire l'apertura bisogna operaresull'albero di comando in sensoantiorario.
CINEMATISMO TIPO 3L'IMS chiude o apre in modo indi-pendente dalla velocita' dell'operato-re. Operando sull'albero di comandocarica molle in senso orario, s'imma-gazzina l'energia sia nella molla dichiusura sia in quella d'apertura.Superato il punto morto si libera ilcinematismo di chiusura permetten-do la chiusura dei contatti con ener-gia accumulata per l'apertura deglistessi mediante leva a mano, o fusi-bile, o bobina d'apertura.
CINEMATISMO PER SEZIONATOREDI MESSA A TERRAIl sezionatore di ST non dovendo néstabilire né interrompere corrente,opera in modo dipendente.Operando sull'albero di comando insenso orario si provoca l'apertura delS.T., operando in senso antiorario sieffettua la chiusura dello ST.Normalmente il sezionatore di ST élegato alla serranda metallica disegregazione, pertanto questa ese-gue in modo simultaneo la stessaoperazione dell'S.T. Nel caso di STcon potere di chiusura il movimentodi chiusura viene effetuato a scattorapido mediante il superamento delpunto morto di una molla opportuna.
CaratteristicheCharacteristics
ISARC
2
15
OPERATING MECHANISMAll above mentioned types are eq-uipped with the following accesso-ries:- Manual operation handle- Mechanical interlock between eart-hing switch and door cubicle- Arranged for key interlocks- Arranged for voltage presence box
SWITCH DISCONNECTOR ISA-RC POLE TRIPPING SEQUENCE
1. Cylinder of the moving contact2. Piston3. Nozzle4. Fixed cylinder
MANOVRATutti i tipi di cinematismi di cui soprasono equipaggiati con:
- Leva per comando manuale- Interblocco tra sezionatore di terrae porta scomparto.- Predisposizione per blocchi a chia-ve- Predisposizione per scatola pre-senza tensione.
SEQUENZA DELLE FASI DIAPERTURA DI UN POLO DEL-L’INTERRUTTORE DI MANO-VRA SEZIONATORE ISARC
1. Cilindro contatto mobile2. Pistone3. Ugello4. Cilindro fisso
1
4
3
2
AccessoriAccessories
ISARC
3
17
Accessori e ricambi 18-19Scelta del fusibile 20
Spare parts and Optionals 18-19Correct fuse choice 20
ISARC
AccessoriAccessories3
18
SPARE PARTS AND AC-CESSORIES
ACCESSORI E RICAMBI
CODE CODECODICE CODICE
DESCRIPTION DESCRIPTIONDESCRIZIONE DESCRIZIONE
INDICATION FOR FUSE TRIPPINGSEGNALAZIONE INTERVENTO FUSIBILE
LEVER FOR DOOR UNLOCKINGLEVA DI SBLOCCO PORTELLO
129000220
129000030
SET OF THREE REDUCTIONS FOR FUSE24˜17,5˜12 kV
SET OF THREE REDUCTIONS FOR FUSE24˜17,5˜ kV
TERNA RIDUZIONI PER FUSIBILE24-17,5-12 kV
TERNA RIDUZIONI PER FUSIBILE
24-17,5 kV
129000230
129000231
24 V.dc
48 V.ac
48 V.dc
110 V.ac
110 V.dc
220 V.ac
MOTOR OPERATING MECHANISMwithout shunt trip with auxiliary contact 4NO+4NC
COMANDO MOTOREsenza bobina di aperturacon contatti ausiliari 4NO+4NC
129000130
129000133
129000131
129000134
129000132
129000135
ELECTROMECHANICAL LOCKBLOCCO ELETTROMECCANICO
LOCK 246/FVSERRATURA 246/FV
24 V.dc
48 V.dc
110 V.dc
220 V.ca
129000120
129000121
129000122
129000123
129000020
VOLTAGE INDICATORFIXED PART
INDIC. PRES. TENSIONEPARTE FISSA
VOLTAGE INDICATORMOVABLE PART
INDIC. PRES. TENSIONEPARTE MOBILE
356100000
356200000
24 V.dc - 48 ac
48 V.dc - 110 ac
48 V.dc
48 ac
110 V.dc - 220 ac
110 V.dc
110 ac
220 V.dc - 415 ac
220 V.dc
220 ac
4 Na + 4 Nc
4 Na + 4 Nc
4 Na + 4 Nc
2 Na + 2 Nc
2 Na + 2 Nc
2 Na + 2 Nc
1 Na + 1 Nc
1 Na + 1 Nc
1 Na + 1 Nc
6 Na + 6 Nc
6 Na + 6 Nc
6 Na + 6 Nc
On line key withdrawable when line is closed
Su linea chiave estraibilea linea chiusaSu linea chiave estraibilea linea apertaSu terra chiave estraibilea terra chiusaSu terra chiave estraibilea terra aperta
On line key withdrawable when line is openOn line key withdrawable when earth is closedOn line key withdrawable when earth is open
KEY INTERLOCKBLOCCO A CHIAVE
BOBINA DI APERTURA
SHUNT TRIP
Senza contatti ausiliari
Without auxiliary contacts
Senza contatti ausiliari
Without auxiliary contacts
BOBINA DI MINIMA TENSIONE
UNDERVOLTAGE RELEASE
CONTATTI AUSILIARIper ISARC da quadro
AUXILIARY CONTACTSISARC for switchboard
CONTATTI AUSILIARIper ISARC da parete
AUXILIARY CONTACTSISARC-P for wall mounting
CONTATTI AUSILIARIper sezionatore di terra
AUXILIARY CONTACTSfor earthing switch
129000110
129000111
129000112
129000113
129000040
129000081
129000091
129000101
129000080
129000090
129000100
129000041
129000060
129000063
129000082
129000092
129000102
129000042
129000061
129000064
129000083
129000093
129000103
129000043
129000062
129000065
AccessoriAccessories
ISARC
3
19
SPARE PARTS AND AC-CESSORIES
ACCESSORI E RICAMBI
ISARC LEVER FOR OPERATION
FROM SWITCHBOARD
LEVA PER COMANDO ISARC
CON MANOVRA DA QUADRO
LEVA PER COMANDO ISARC PMANOVRA DIRETTA
ISARC-P LEVER FOR DIRECT OPERATION
129000010
129000001
DEVIATED SIDE OPERATION FROM WALL
MANOVRA FRONTALE RINVIATA DA PARETE
SHAFT EXTENSION WITH SLEEVE(L= 1m) and support for shaft+earth
PROLUNGA DI ALBERO CON MANICOTTO(L=1m) e sostegno albero di terra
SHAFT EXTENSION WITH SLEEVE(L= 1m) and support for line shaft
PROLUNGA DI ALBERO CON MANICOTTO(L=1m) e sostegno albero di linea
LEVER FOR DEVIATED OPERATINGMECHANISM
LEVA PER COMANDO RINVIATO
129000270
129000250
129000251
129000240
DEVIATED FRONT OPARTION FROM WALL
MANOVRA FRONTALE RINVIATA DA PARETE
129000280
LEVA PER COMANDO FIORETTO ALBERODI TERRA
LEVER FOR LINE SHAFT OPERATIONBY INSULATED ROD
LEVER FOR EARTH SHAFT OPERATIONBY INSULATED ROD
LEVA PER COMANDO FIORETTO ALBERODI LINEA
129000260
129000261
EARTH APPLICATION ON SHUTTERAPPLICAZIONE TERRA SU PERSIANA
129000290
CAPACITIVE DIVIDERS FOR ISARC-P
CAPACITIVE DERIVATORS FOR ISARC-P
C1 12
C3 12
C1 24
C3 24
C1 36
C3 36
129000210
129000211
129000212
129000213
129000214
129000215
CAPACITIVE DIVIDERS FOR ISARC
DERIVATORI CAPACITIVI PER ISARC
C1 12
C3 12
C1 24
C3 24
C1 36
C3 36
129000200
129000201
129000202
129000203
129000204
129000205
12 kV 331000012
331000024
SUPPORTING INSULATOR
ISOLATORE PORTANTE
24 kV
12 kV
CAPACITIVE INSULATOR
333000012
333000024
ISOLATORE CAPACITIVO
24 kV
CODE CODECODICE CODICE
DESCRIPTION DESCRIPTIONDESCRIZIONE DESCRIZIONE
ISARC
AccessoriAccessories3
20
TABLE FOR THE CHOICEOF THE CORRECT FUSE
Rated currents for VEI H.V.-fuses fortransformer rated capacities
Remark: For the performance on redlabel ask VEI
TABELLA PER LA SCELTADEL FUSIBILE
Corrente nominale del fusibile in fun-zione della potenza del trasformatore
N.B.: Per le prestazioni su fondorosso chiedere alla VEI
100
16
10
10
10/12
15/17,5
20/24
125
16
10
10
160
20
16
16
200
25
16
16
250
32
20
16
U = 4% U = 5%
3 s
U = 6%
4 s
x x x
315
40
25
25
400
50
32
25
500
63
40
32
630
80
50
40
100
63
63
125 160 200
160
125
100 125 160
125
100
80
63
100
80
125
100
-
800 1000 1250 1600 200
Rated current of high voltage fuse link in A
Short-circuit time
Ratedvoltage
Tensionenominale
kV
Potenza del trasformatore in kVA kVA Transformer power
Tempo di corto circuito
Corrente nominale del fusibile in A
Dimensioni/VersioniDimensions/Versions
ISARC
4
21
Dimensioni d’ingombro e pesi 22Versioni ISARC 24-26Sezionatore di terra 27Composizione del codice 28
Overall dimensions & weights 22ISARC versions 24-26Earthing switch 27Composition of article code 28
ISARC
Dimensioni/VersioniDimensions/Versions4
22
OVERALL DIMENSIONSAND WEIGHTS (ISARC)
Type 1 - Switch disconnectorType 2 - Transformer protection fu-se-switch disconnectorType 3 - Disconnector (off-load)Type 4 - Disconnector with fuse-hol-ders (off-load)
DIMENSIONI DI INGOM-BRO E PESI (ISARC)
Tipo 1- Interruttore di manovra-sezio-natore sottocarico Tipo 2 - Interruttore di manovra-sezi-onatore sottocarico protezione tra-sformatoriTipo 3 - Sezionatore a vuotoTipo 4 - Sezionatore a vuoto con por-tafusibili
TipoType KV
12 390
390
880
880
600
600
210
210
582
582
270
270
450
450
67
67
65
65
155
155
287
287
172
172
368
368
78
78
337
337
194
194
94
94
105
105
373
373
175
175
65
6517,5
PesoWeight
kg
1 - 3
24 475 107 813 300 657 308 535 67 65 215 353 172 368 78 403 194 94 105 449 225 94
12 390
390
940
940
600
600
210
210
582
582
270
270
450
450
67
67
65
65
155
155
287
287
172
172
368
368
78
78
337
337
194
194
94
94
105
105
373
373
175
175
76
7617,52 - 4
24 475 1114 813 300 657 308 535 67 65 215 353 172 368 78 403 194 94 105 449 225 101
B
P
G
L30
E
WU
V
FF
12,5
A D
C T
D
ZJ
M12
24
M
K
R
N
S
24
Dimensioni/VersioniDimensions/Versions
ISARC
4
23
OVERALL DIMENSIONSAND WEIGHTS (ISARC P)
Type 1 - Switch disconnectorType 2 - Transformer protection fu-se-switch disconnectorType 3 - Disconnector (off-load)Type 4 - Disconnector with fuse-hol-ders (off-load)
DIMENSIONI DI INGOM-BRO E PESI (ISARC P)
Tipo 1- Interruttore di manovra-sezio-natore sottocarico Tipo 2 - Interruttore di manovra-sezi-onatore sottocarico protezione tra-sformatoriTipo 3 - Sezionatore a vuotoTipo 4 - Sezionatore a vuoto con por-tafusibili
(*) Per esecuzioni a 36kV chiedere alla VEIFor execution 36kV ask VEI
KV
12 210 380 695 335 290 375 655 620 300 660 815 35 85 80 100 78 601P - 3P
24 300 455 900 403 375 430 770 800 400 840 1080 50 170 90 35 96 75
12 210 380 900 335 290 395 655 620 300 660 815 35 125 80 100 78 652P - 4P
24 300 455 1070 403 375 480 770 800 400 840 1080 50 200 90 35 96 80
(*)
(*)
C
B
G
IS
105
105
Ø30
RP
N
D H
A
L
M
A
E
T
F
TipoType
PesoWeight
kg
ISARC
Dimensioni/VersioniDimensions/Versions4
24
VERSIONS ISARC 24 kV
Type 1 - Switch disconnectorType 2 - Transformer protection fu-se-switch disconnectorType 3 - Disconnector (off-load)Type 4 - Disconnector with fuse-hol-ders (off-load)
VERSIONI ISARC 24 kV
Tipo 1- Interruttore di manovra-sezio-natore sottocarico Tipo 2 - Interruttore di manovra-sezi-onatore sottocarico protezione tra-sformatoriTipo 3 - Sezionatore a vuotoTipo 4 - Sezionatore a vuoto con por-tafusibili
1-03
2-03
3-03
1-04
2-04
3-04
1-11
2-11
3-05
4-03
1-12
2-12
3-06
4-04
Di serieStandard
Fixed
On request
Plug-in
Alternative
Draw-out
On request but incompatible
Fisso
A richiesta
Sezionabile
Alternativa a richiesta
Estraibile
A richiesta ma incompatibile
3-08
3-09
3-10
3-11
3-55
3-56
3-58
3-59
3-60
3-61
1
1
1
1
3
3
3
3
V
V
V F
S
F
S
E
E
F
S
F
S
E
E
V
V
V
V
V
V
V
V
V
V
V
V
V
F S EDependant from operatorManovra dipendenteV
De
sc
r.
De
sc
rip
.
Co
de
So
tto
ca
ric
o
On
-lo
ad
On
-lo
ad
wit
h
fuses
Off
-lo
ad
So
tto
cari
co
co
n f
usib
ili
A v
uo
toA
vu
oto
Off
-lo
ad
wit
h f
uses
co
n f
usib
ili
Tip
o
Ty
pe
Rig
ht
Le
ft
Ca
ble
sid
e
Ca
ble
sid
e lin
e e
art
h
Se
pa
rate
d
With
makin
g c
ap
acity
Fu
se h
old
er
Vo
ltag
e in
dic
ato
r
Com
bine
d w
ith c
ircui
t bre
aker
Up
sid
e d
ow
n
Arr
ang
ed f
or
mo
tor
op
erat
ing
mec
han
ism
Comando
Operating mechanism Earthing Accessories
Terra Accessori
De
str
o
Sin
istr
o
A v
all
e
Te
rra
lin
ea
a v
all
e
Co
n p
ote
re d
i ch
iusu
ra
Se
pa
rata
Po
rtafu
sib
ili
Ind
icat
ori
pre
s. t
ensi
on
e
Com
bina
to c
on in
terr
utto
re
Ca
po
vo
lto
Pre
dis
po
sto
per
co
ma
nd
o a
mo
tore
Co
dic
e
Tipo di
Product type
prodotto
Dimensioni/VersioniDimensions/Versions
ISARC
4
25
VERSIONS ISARC 12-17,5 kV
Type 1 - Switch disconnectorType 2 - Transformer protection fu-se-switch disconnectorType 3 - Disconnector (off-load)Type 4 - Disconnector with fuse-hol-ders (off-load)
VERSIONI ISARC 12-17,5 kV
Tipo 1- Interruttore di manovra-sezio-natore sottocarico Tipo 2 - Interruttore di manovra-sezi-onatore sottocarico protezione tra-sformatoriTipo 3 - Sezionatore a vuotoTipo 4 - Sezionatore a vuoto con por-tafusibili
1-03
2-03
3-03
1-04
2-04
3-04
1-11
2-11
3-05
4-03
1-12
2-12
3-06
4-04
3-55
3-56
1
1
1
1
3
3
3
3
V
V
V
V
V
V
V
V
Descr.
So
tto
ca
ric
oS
ott
oc
ari
co
co
n f
usib
ili
A v
uo
toA
vu
oto
co
n f
usib
ili
Tip
o
Comando Terra AccessoriD
es
tro
Sin
istr
o
A v
alle
Te
rra
lin
ea
a v
all
e
Co
n p
ote
re d
i c
hiu
su
ra
Se
pa
rata
Po
rtafu
sib
ili
Ind
icato
ri p
res. te
nsio
ne
Cap
ovo
lto
Pre
dis
po
sto
per
co
man
do
a m
oto
re
Co
dic
e
Tipo di prodotto
Descri
p.
Co
de
On
-lo
ad
On
-lo
ad
w
ith
fu
ses
Off
-lo
ad
Off
-lo
ad
wit
h f
uses
Ty
pe
Rig
ht
Le
ft
Ca
ble
sid
e
Se
pa
rate
d
With
makin
g c
ap
acity
Fu
se h
old
er
Vo
lta
ge in
dic
ato
r
Up
sid
e d
ow
n
Arr
an
ge
d f
or
mo
tor
op
era
tin
g m
ec
ha
nis
m
Operating mechanism Earthing Accessories
Product type
Di serieStandard
Fixed
On request
Plug-in
Alternative
Draw-out
On request but incompatible
Fisso
A richiesta
Sezionabile
Alternativa a richiesta
Estraibile
A richiesta ma incompatibile
F S EDependant from operatorManovra dipendenteV
Cab
le s
ide lin
e e
art
h
Com
bine
d w
ith c
ircui
t bre
aker
Com
bina
to c
on in
terr
utto
re
ISARC
Dimensioni/VersioniDimensions/Versions4
26
VERSIONS ISARC P 12-24 kV
Type 1 - Switch disconnectorType 2 - Transformer protection fu-se-switch disconnectorType 3 - Disconnector (off-load)Type 4 - Disconnector with fuse-hol-ders (off-load)
VERSIONI ISARC P 12-24 kV
Tipo 1- Interruttore di manovra-sezio-natore sottocarico Tipo 2 - Interruttore di manovra-sezi-onatore sottocarico protezione tra-sformatoriTipo 3 - Sezionatore a vuotoTipo 4 - Sezionatore a vuoto con por-tafusibili
1P-01
2P-01
3P-01
1P-02
2P-02
3P-02
1P-09
2P-09
4P-01
1P-10
2P-10
4P-02
1
1
1
1
3
3
3
3
V
V
V
V
So
tto
cari
co
So
tto
cari
co
co
n f
usib
ili
A v
uo
toA
vu
oto
co
n f
usib
ili
Tip
o
Comando Terra Accessori
De
str
o
Sin
istr
o
A v
alle
Po
rtafu
sib
ili
Ind
icato
ri p
res. te
nsio
ne
Per
mo
nta
gg
io in
qu
adro
Co
n p
ote
re d
i ch
iusu
ra
Pre
dis
po
sto
per
co
man
do
a m
oto
re
Tipo di prodotto
De
sc
r.
De
sc
rip
.
Co
de
On
-lo
ad
On
-lo
ad
w
ith
fu
ses
Off
-lo
ad
Off
-lo
ad
wit
h f
uses
Ty
pe
Rig
ht
Le
ft
Cab
le s
ide
Fo
r p
an
els
mo
un
tin
g
With
makin
g c
ap
acity
Fu
se h
old
er
Vo
ltag
e in
dic
ato
r
Arr
an
ged
fo
r m
oto
ro
pera
tin
g m
ech
an
ism
Operating mechanism Earthing Accessories
Co
dic
e
Product type
Di serieStandard On request Alternative
A richiesta Alternativa a richiestaDependant from operatorManovra dipendenteV
Dimensioni/VersioniDimensions/Versions
ISARC
4
27
EARTHING SWITCH 12-24 kV
SEZIONATORE DI TERRA 12-24 kV
TipoType KV
12 290
Dimensioni mmDimension mm
300
300
600 210 46ST
24 400 813 300 46
1
1
1
Sezio
nato
re
Eart
hin
g
sw
itch
di te
rra
Tip
o
Comando Accessori
De
str
o
Sin
istr
o
Co
n p
ote
re d
i c
hiu
su
ra
Ind
ica
tori
pre
s. te
ns
ion
e
Tipo di
prodotto
ST 12
ST 24
(*)
De
sc
r.
De
sc
rip
.
Co
de
Ty
pe
Rig
ht
Le
ft
With
makin
g c
ap
acity
Vo
ltag
e in
dic
ato
r
Operating mechanism Accessories
Co
dic
e
Product type
Di serieStandard On request Alternative
A richiesta Alternativa a richiesta
ISARC
Dimensioni/VersioniDimensions/Versions4
28
COMPOSITION OF ARTI-CLE CODE
COMPOSIZIONE DELCODICE
CORRENTE NOMINALERATED CURRENT
4
6
8
- 400 A
- 630 A
- 800 A
CORRENTE DI BREVE DURATASHORT TIME CURRENT
101 - 1-01102 - 1-02103 - 1-03104 - 1-04109 - 1-09110 - 1-10111 - 1-11112 - 1-12201 - 2-01202 - 2-02203 - 2-03204 - 2-04209 - 2-09210 - 2-10211 - 2-11212 - 2-12301 - 3-01302 - 3-02303 - 3-03304 - 3-04305 - 3-05306 - 3-06308 - 3-08309 - 3-09310311 - 3-11
- 3-10
401 - 4-01402 - 4-02403 - 4-03404 - 4-04
TIPO DI PRODOTTOTYPE OF PRODUCT
FAMIGLIA DI PRODOTTI
101
102
106
107
108
111
114
118
- IMS per quadri tipo Isarc con comando destro- Switch disconnector for switchboard: ISARC with right hand operating mechanism
- Switch disconnector for switchboard ISARC upside down right hand operating mechanism
- Switch disconnector for switchboard ISARC left side operating mechanism
- Switch disconnector for switchboard ISARC upside down left hand operating mechanism
- Switch disconnector for switchboard ISARC arranged for motor operation
- Switch disconnector for wall mounting ISARC -P.
- Switch disconnector for wall mounting ISARC-P with mechanical remote control
- Switch disconnector for wall mounting ISARC -P arranged for operation by motor
- IMS per quadri tipo Isarc rovesciato con comando destro
- IMS per quadri tipo Isarc rovesciato con comando sinistro
- IMS per quadri tipo Isarc con comando sinistro
- IMS Isarc predisposto per comando motore
- IMS Isarc P per montaggio a parete
- IMS Isarc P per montaggio a parete con comando a distanza
- IMS Isarc P per montaggio a parete con comando a motore
TENSIONE NOMINALERATED VOLTAGE
1
2
3
- 12 kV
- 24 kV
- 36 kV
- 12,5 kA
- 16 kA
- 20 kA
- 25 kA
0
1
2
3
1 2 3 4 5 6 7 8 9