1 Tell us about yourself!
2 Tell us about your spa cover!
NAME
STREET ADDRESS
ZIPSTCITY
PHONE NUMBER EMAIL ADDRESS
Choose your shape:
L1
R
L3
L2
Check here if none of the shapes apply. A plastic template will be required. Ask for Sunstar Template Guide.
( ) -
Color:
SKIRT LENGTH (STD: 2")
TIE-DOWN LENGTH(MIN: 3”, STD: 7")
Fine Details:
DURAFOAM (IN #)
TAPER
3 Sign & send!
Cover specifications above were provided by:Spa Owner assumes all responsibility for cover specifications above.Please allow approximately 4-6 weeks from date of order.
SIGNATURE DATE
SUBTOTAL
DELIVERY
TAX
TOTAL
Spa Owner Dealer
COVER STYLE: DELIVERY?
SPA BRAND SPA MODEL YEAR
PREFERRED CONTACT METHOD:
HINGE:
Please enter all measurements in inches!
! Help! How do I find R (the corner radius)?
To find the radius, you’ll need the following tools:
Carpenter’s square (T-square)
Don’t have a carpenter’s square? You can make one out of cardboard or two rulers; the important thing is to have a square corner!
Ruler/tape measure (if no carpenter square)
Pen and paper
How to measure:
1. Line up the carpenter’s square along theoutside corner of the spa.
2. Measure from Point A (where the curve ofthe corner starts) to Point B (the inner cornerof the square).
3. Record this measurement in inches,rounding down if necessary (i.e. 5.7 inchesrounds down to 5 inches).
This measurement is your radius (R)! Record this number in the R field on the form.
Note: if your cover does not have rounded corners, you can leave R blank.