Date post: | 17-Dec-2015 |
Category: |
Documents |
Upload: | evangeline-bruce |
View: | 220 times |
Download: | 3 times |
1
Therma-Tru College
always make a great entrance
Best Product Line-Up- Patio Door Systems-
2
Therma-Tru’s Patio Door System portfolio targets all segments and price points of the market through a
“Good-Better-Best” strategy
• Fiber-Classic®
Textured fiberglass patio door system that looks and feels like wood
• Smooth-Star®
Smooth fiberglass patio door system - pre-finished that looks like clad wood
• PDFEntry level patio system targeted at the production builder and the value conscious consumer
• Fiber-Classic®
Textured fiberglass patio door system that looks and feels like wood
• Smooth-Star®
Smooth fiberglass patio door system - pre-finished that has a traditional “French” door look
• Slim-Line™Pultruded fiberglass patio door with large glass area
• VinylEntry level slider to meet production builder needs
HingedHinged SlidingSliding
BestBest
BetterBetter
GoodGood
Patio Door Systems - Product Portfolio
$1400-1800
$1150-1600
$700-840
3
Hinged Patio Door Systems
4
Fiber-Classic® and Smooth-Star®
5
Overview
• Performance• Standard flush-glazed Low-E insulated glass• High heat composite frames• Brickmould and mullions are rot and moisture
resistant• LVL Lock Stile• Self-aligning hinges • Aluminum integral mounting flange provides
ease of installation• Proprietary adjustable security strike plate• ENERGY-STAR rated
• Selection• In-swing and out-swing• Heights: 6’6”, 6’8” and 8’0”• Four factory-finished exterior colors• Contoured GBG (option) and interior wood
grilles (accessory)
• Full system warranty
Fiber-Classic® Textured – Interior
ready to stain or paint
Smooth-Star® Smooth – Interior ready
to paint
Patio Tru-Defense Door System with Enhanced Warranty “Rider”TD
6
Hinged Patio Door Systems (FC & SS) - Components
Wood lock stile and Polyurethane foam core
Self-Adjusting Hinges
Available: 7 finishes
Flush Glazed Low-E Panels
Composite Sill
Adjustable Security Strike Plates
Available: 6 finishes
High-Heat Composite Frame, brickmold and mull post
WeatherstripStone
7
Feature - Composite Adjustable Sill
• Higher-profile sill significantly reduces air and water infiltration
• Flush surface creates full contact between sweep and sill for better performance
• Composite construction eliminates destructive effects or water
• Full substrate
• Available in satin nickel finishOut-swing
composite sill
In-swing composite adjustable
8
Feature - High-Heat Composite Frames
• Solid Cellular PVC• Closely matches the structure and density of pine,
giving the frame the look and feel of traditional wood • No raised grain
• No rotting, splitting or warping• Withstands extreme temperature ranges
• Tested to withstand temperature (+200oF to –20oF) and humidity extremes
• Energy efficient • Out performs wood and aluminum
• Color Matched• Finish is matched to the color chosen for the panels
• Arctic Long-Reach compression weatherstrip in Stone color
• Tight seal in any weather• Easily removed for finishing
• 4-9/16" (standard) or 6-9/16" (option)• Proprietary Integral Mounting Flange
9
Feature - Prep / Strike Plate
• Standard lock-prep on all active panels• 2-1/8” diameter x 2-3/8” backset
• Double bored for lockset and deadbolt
• 5-1/2” center to center
• Proprietary Security Strike Plate installed on frame at the lockset on units with an active panel closing to the frame (i.e., singles, center-hinged, etc).• Resists 450 pounds of force
• Adjustable to maintain consistent weatherstrip to door contact
• In Yellow Zinc, Brushed Nickel, Oil-rubbed Bronze, Polished Chrome, Antique Nickel or Antique Brass
10
• Self aligning hinges (standard)• Choice of seven finishes
• Yellow Zinc, White, Brushed Nickel, Oil-rubbed Bronze, Polished Chrome, Antique Nickel, or Antique Brass
• In-swing and NRP Outswing
• Adjustable hinges (upgrade option)• Vertical and horizontal adjustments
• Seven finishes to match MPLS
• In-swing and NRP Outswing
• RTA units factory prepped
• Installed on assembled units
Feature - Hinges
11
Feature - Exterior Colors
• All units feature a factory finished exterior in a choice of one of four colors:
White Stone Almond Bronze
• Commercial coating:• Extremely durable
• Resists fading and chalking
• Can be field re-painted with minimum prep
12
Upgrade Option - Multi-point locking system / Kits
• Multi-Point Lock System• NAMI Certified Results A/W/S Certified
Results
• Lock gear is Series 300 stainless steel
• Self lubricating
• Won’t pit or corrode
• Mishandling device prevents damage to lock, door panel and casing
• Lock gear is installed in the panel
• Trim/handle kit shipped in a carton• For installation after System is hung and
finished
13
Millennium DecadeUniverse* Ara Heirloom Venture
Brass
White
Oil-Rubbed Bronze
Polished Chrome
Brushed Nickel Antique Brass
Antique Nickel
*Only available in Brass and Polished Chrome
Upgrade Option - Multi-point locking system (cont)
Handle set / trim styles
Finishes available
No Handle
14
Accessory - Transom
• Rectangular Transom• Several configurations from 2/6 singles to
9/0 Triples
• Fully assembled
• Low-E glass
• A 6/8 unit with mulled transom fits into same opening as an 8/0 tall unit
• In-swing only
15
Accessory - Screen
• Slim Profile Screen• Aluminum construction
• 2” wide, contour profile
• Available pre-finished in 4 colors
• Top-Hung, Wide Profile Screen• Heavy gauge aluminum construction
• 3” wide, contour profile
• Top hung for flawless operation
• Available pre-finished in 4 colors
• Double Hinged Screen• Aluminum construction
• Fits on any Therma-Tru double In-swing unit
• Available pre-finished in 4 colors
16
Available Configurations - Out-swing / In-Swing
• Singles• Active• Fixed • 2/6, 2/8, 2/10, 3/0
• Doubles• Center-Hinged, Jamb-Hinged• French • Fixed• 5/0, 5/4, 5/8, 6/0
• Triples• Continuous head & sill • 7/6 & 9/0
All in 6/6, 6/8 & 8/0 tall
17
Design Pressure (DP) Ratings
• Out-swing
Singles up to 3/0 x 6/8 = DP-80/DP-80Singles up to 3/0 x 8/0 = DP-80/DP-70
Doubles up to 6/0 x 6/8 = DP-80/DP-80* Doubles up to 6/0 x 8/0 = DP-80/DP-70*
Triples up to 6/0 x 6/8 = DP-80/DP-80Triples up to 6/0 x 8/0 = DP-80/DP-70
• In-swing
Singles up to 3/0 x 6/8 = DP-45/DP-80Singles up to 3/0 x 8/0 = DP-45/DP-60
Doubles up to 6/0 x 6/8 = DP-45/DP-80*Doubles up to 6/0 x 8/0 = DP-45/DP-60*
Triples up to 6/0 x 6/8 = DP-45/DP-80Triples up to 6/0 x 8/0 = DP-45/DP-60
*See full matrix of DP Ratings on Therma-Tru website
18
PDF™
19
Overview
• Performance• Molded open panels • 4-9/16” Primed pine frame (standard) or 6-9/16”
(option)• Brickmould attached• LVL lock stile• Adjustable sill in mill finish• Self-aligning hinges• Proprietary adjustable security strike plate• ENERGY-STAR rated with optional Low-E glass • Full factory assembled
• Selection• In-swing and out-swing• Heights: 6’6” and 6’8”• Flat bar GBG (option)
• Full system warranty
Patio Tru-Defense Door System with Enhanced Warranty “Rider” / In-swing only and non-French Door
TD
20
Adjustable Security Strike Plates
Available: 3 finishes
Self-Aligning HingesAvailable: 4 finishes
Wood lock stile and Polyurethane foam core
WeatherstripBronze
Energy Star rated when optional Low-E glass is selected
Hinged Patio Door Systems (PDF) - Components
Composite Sill
21
Feature - Composite Adjustable Sill
• Higher-profile sill significantly reduces air and water infiltration
• Flush surface creates full contact between sweep and sill for better performance
• Composite construction eliminates destructive effects or water
• Available in mill finish
Out-swing
In-swing composite adjustable
22
Feature - Hinges / Security Strike Plate
• Self aligning hinges available in yellow zinc, brushed nickel, white, and oil-rubbed bronze
• Proprietary Security Strike Plate, in 3 finishes, is installed on frame at the lockset on units with an active panel closing to the frame (i.e., center-hinged, hinged off the Jamb, etc).• Resists 450 pounds of force
• Adjustable to maintain consistent weatherstrip to door contact
23
• Rectangular and Elliptical Transoms• For 5/0, 5/4, 5/8 & 6/0 wide Center-Mulled units
• Primed 4-9/16 and 6-9/16 frames
• Clear insulated glass only
• Brickmould is attached on Elliptical transoms and interior casing is available
Accesory - Transom
24
Option - Glass
• Choose which lites you want installed…• Clear IG
• Clear 10 lite GBG
• Clear 15 lite GBG
• Low-E
• Internal Mini-Blinds
• Or choose an “Open” unit for the installation of many Therma-Tru lite inserts later
25
Accessory - Screen
• Slim Profile Screen• Aluminum construction
• 2” wide, contour profile
• Available pre-finished in 4 colors
• Top-Hung, Wide Profile Screen• Heavy gauge aluminum construction
• 3” wide, contour profile
• Top hung for flawless operation
• Available pre-finished in 4 colors
• Double Hinged Screen• Aluminum construction
• Fits on any Therma-Tru double In-swing unit
• Available pre-finished in 4 colors
26
Available Configurations
• Singles • Inswing Active• 2/6, 2/8, 2/10, 3/0
• Doubles• Inswing Center-hinged, French or Jamb-hung• Outswing French• 5/0, 5/4, 5/8, 6/0
• Triples • Continuous head & sill • Inswing only• 7/6 & 9/0
All in 6/6 & 6/8 tall
27
Sliding Patio Door Systems
28
Fiber-Classic® and Smooth-Star®
29
Overview
• Performance• Standard flush-glazed tempered Low-E
glass• Fiberglass pultruded frame and sill• LVL lock-stile• Stainless steel hardware• Spring-loaded foot bolt• ENERGY-STAR rated
• Selection• Heights: 6’6”, 6’8”, 8’0”• Four factory-finished exterior colors• Contoured GBG (option) and interior wood
grilles (accessory)
• Full system warranty
Fiber-Classic® Textured – Interior
ready to stain or paint
Smooth-Star® Smooth – Interior ready
to paint
30
LVL Interlock and Polyurethane foam core
Available: 4 finishes
Flush Glazed Low-E Panels
Multi-point Locking System
Spring-Loaded Footbolt
DP-55*Performance
Rated
*The DP rating on some configurations may be less than DP-55. Refer to the matrix on www.thermatru.com
Sliding Patio Door Systems (FC & SS) - Components
All Stainless Steel Hardware
31
• Stainless steel multi-point lock with Millennium handle set• White finish (standard)• Brass, Brushed Nickel, or Oil-Rubbed Bronze (optional)• Compatible with Entry Systems MPLS
• Stainless steel tandem truck rollers
• All stainless steel hardware makes the product “coastal” ready as a standard offering
Feature - Multi-point Locking System
No Handleset
This allows the distributor or dealer to stock units without a lock and then add it (from their stock) in the customer’s choice of finish when the unit is shipped
32
Feature - Spring-Load Foot Bolt
• Spring-Loaded Foot bolt• Locks into Sill Rail to add greater security
• Comes with each active panel unit
• Features a unique design for the strike plate to accommodate the radius riser of the DP-50 sill cap
33
Feature - Exterior Colors
• All units feature a factory finished exterior in a choice of one of four colors:
White Stone Almond Bronze
• Commercial coating:• Extremely durable
• Resists fading and chalking
• Can be field re-painted with minimum prep
34
Available Configurations
• Doubles1
• 5/0 & 6/0
• Triples2
• 9/0
• Continuous head/sill configuration.
• Quads2
• 10/0 & 12/0
All Systems available in 6/6, 6/8 & 8/0 tall
1 – Available in Prehung or RTA in all Heights
2 – Available in RTA only
35
Design Pressure (DP) Rating
• Doubles up to 6/0 x 8/0= DP-55
• Triples up to 9/0 x 8/0 = DP-45
• Quads up to 12/0 x 6/8 = DP-45• Quads up to 12/0 x 8/0 = DP-40
36
Accessory - Screen
• Slim Profile Screen• Aluminum construction
• 2” wide, contour profile
• Available pre-finished in 4 colors
• Top-Hung, Wide Profile Screen• Heavy gauge aluminum construction
• 3” wide, contour profile
• Top hung for flawless operation
• Available pre-finished in 4 colors
37
Slim-Line™
38
Overview
• Performance• Tempered Low-E insulated glass• Fiberglass pultruded frame and sill• All fiberglass door panel• Increased glass surface area• Dual-point locking system• Spring-loaded foot bolt• ENERGY-STAR rated• Factory finished interior and exterior
• Selection• Heights: 6’6” and 8’0”• Four factory-finished exterior colors• Contoured GBG (option)
• Full system warranty
39
Spring-Loaded Footbolt
Dual-Point Locking System
Fiberglass Frame reinforced with composite blocks
DP-50*Performance
Rated
*The DP rating on some configurations may be less than DP-50. Refer to the matrix on www.thermatru.com
Sliding Patio Door Systems (Slim-Line) - Components
40
Feature - Sill / Rollers
• Sill is Stone pultruded fiberglass over a rot-resistant composite substrate• Stainless steel rolling surfaces for panels
and screen
• Heavy duty tandem-truck rollers• Fully adjustable
• Stainless steel bearings
• “Coastal” package (accessory)• Includes stainless steel roller assemblies,
lock mechanism, strike plate and exposed fasteners
41
• Locks into Sill Rail to add greater security• Comes with each active panel unit• Features a unique design for the strike
plate to accommodate the radius riser of the DP-50 sill cap
Feature - Spring-Loaded Foot Bolt
42
• Elegant Design• Featuring a Schlage Series “C” keyway
• 4 finishes• White (standard) or Polished Brass,
Brushed Nickel and Oil-rubbed Bronze (upgrade option)
• 20 year warranty on the finish
• No handleset (option)
• This allows the distributor or dealer to stock units without a lock and then add it (from their stock) in the customer’s choice of finish when the unit is shipped
Feature - Keyed Dual-Point Locking System
43
• The panels, frame and sill are made from strong and durable pultruded fiberglass
• Factory finished both sides in one of four standard colors
White Stone Almond Bronze
• Two-tone finish choices - different interior/exterior (Option)• If GBG is selected, GBG is two-tone as well
Feature - Exterior Color
44
Accessory - Transom
• Rectangular Transoms• Several configurations from 2/6 singles to
12/0 quads
• Up to 9/0 as a single unit
• 10/0 & 12/0 are two units mulled in center
• Architecturally correct sight-lines
• Fully assembled
• Low-E glass
• Mull cap, sealing fin and drip cap included
• A 6/6 unit with mulled transom fits into same opening as an 8/0 tall unit
45
Option - Glass
• Choose which lites you want installed…• 1 lite IG
• 10 lite GBG
• 15 lite GBG
• Low-E
• Impact-rated
46
Available Configurations
• Singles1 • Fixed panel MEU’s• 2/6, 3/0 & 4/0 wide
• Doubles1
• 5/0, 6/0 & 8/0
• Triples2
• 9/0 & 12/0• Continuous head/sill or boxed depending on
handing configuration
• Quads2
• 10/0 & 12/0
All Systems available in 6/6 or 8/0 tall
1 – Available in Prehung or RTA in all heights, excludes impact units, and 4/0 Panel Units
2 – Available in RTA only
47
• Singles up to 3/0 x 8/0 = DP-50*
• Singles up to 4/0 x 8/0 = DP-30*
• Doubles up to 6/0 x 8/0= DP-50*
• Doubles up to 8/0 x 8/0= DP-35*
• Triples up to 9/0 x 8/0 = DP-50*
• Triples up to 12/0 x 8/0 = DP-30*
• Quads up to 12/0 x 6/6 = DP-35*
• Quads up to 12/0 x 8/0 = DP-30*
*See full matrix of DP Ratings on Therma-tru website
Available with Tru-Defense™ Impact Rated Glass – DP-50 rated
Design Performance (DP) Ratings
48
Vinyl
49
• Performance• 7’8” insulated glass • Welded PVC frame and sash, fully assembled
and ready to install
• Aluminum stiffener on lock stile
• Dual-point locking system
• Fully adjustable tandem rollers
• ENERGY STAR-rated with optional Low-E glass
• Fully assembled
• Selection• Height: 6’6”
• Full system warranty
Overview
50
Twin-Point Locking SystemPVC Frame and Sash with 7/8” Insulated Glass
DP-50*Performance
Rated
*The DP rating on some configurations may be less than DP-50. Refer to the matrix on www.thermatru.com
Vinyl is Energy Star rated when optional Low-E glass is selected
Sliding Patio Door Systems (Vinyl) - Components
51
Inter-lockWeather
Seal
HeavyGaugeSteel
Stiffener
Feature
• Galvanized steel stiffeners at the panel meeting rails Increased strength and dimensional stability SGD-R50 structural rating (DP50) Maintains alignment of inter-lock weather seals
52
• Full length aluminum stiffener in the lock rail • Increased security and strength
• Twin-point locking handle set • Keyed lock (accessory)
• Brass interior handle (accessory)
• Stainless Steel Coastal Package Kit (accessory)• Stainless Steel Rollers and Fasteners
Feature
53
Feature
• The “Fixed” panel is actually part of the frame• “Uni-body” technology
• Stronger, more dimensionally stable unit
• Active panel features fully adjustable tandem truck rollers• Nylon rollers for virtually silent, smooth operation
• Steel bearings for long life
54
• 7/8” Clear insulated glass standard, or choose…• Clear 15 lite GBG with contoured grid (option)
• Low-E (option)
• Low-E 15 lite GBG with contoured grid (option)
• Duo-Durometer glazing stops• Positive sash to glass seal
• No “squeeze-out” to clean off the glass
Feature
55
Feature
• Anodized aluminum sill cap and active panel mono-rail rolling track• Corrosion resistant
• Long life
• A quality extruded aluminum screen included on every active panel unit• Easy-glide rollers
• Fiberglass mesh screen
• Locking handle
56
Available configuration• Double
• 5/0, 6/0 & 8/0• 6/6 tall (actual unit height = 79-1/2")
Design Pressure (DP) rating• Doubles up to 8/0 x 6/6 = DP-50
Available Configuration / Design Pressure Rating
57
Patio Door Configurator
58
Thank You
59
APPENDIX
60
SCREEN TRACK
INTEGRAL MOUNTING FLANGE
BRICKMOULD
JAMB
WALLINSWINGINSWING
61
STUCCO INTEGRAL MOUNTING FLANGE
BRICKMOULD
JAMB
INSWINGINSWING
62
OUTSWINGOUTSWINGINSTALLATION
FLANGE
BRICKMOULD
JAMB
WALL
63
OUTSWINGOUTSWING
INSTALLATION FLANGE
BRICKMOULD
JAMB
STUCCO
64
OUTSWINGOUTSWING
INSTALLATION FLANGE
JAMB
65
Why Pultrusion?
• Effective• The pultrusion process is one of the most effective methods for the production of
composite lineal profiles
• Efficient• It is a continuous automated process that produces little waste
• Excellent• It produces materials of consistent strength and uniform quality
• High Strength• 1-1/2 times the strength of structural rated fir lumber
• Superior Insulation• 37 times a better insulator than aluminum
• Light Weight• 30% lighter than aluminum
• Durable• Will not dent or deform like wood and aluminum
66
The Pultrusion Process
67
Reinforcement Dispensing
• Continuous fiberglass “rovings” are dispensed from center pull packages
• Porcelain eyelets eliminate static build-up and degradation of glass
• Fiberglass passes through a carding index that orients the fibers
68
Resin Impregnation
• The reinforcements are then drawn through the wet-out tank
• Pan guides keep the roving separated and maintain tension on the strands to permit the resin to wet-out each fiber
69
Preforming Section
• Saturated roving exits the resin bath and pass through a series of bushings or forming guides
• Excess resin is stripped off
• Fiberglass takes form for next stage
70
Curing Die
• Fiberglass enters heated steel dies that are in the shape of the final composite
• Die is heated by electric strip heaters or platens on top or bottom of the die surface
• Chrome plated interior die surfaces for increased die life and improved surface finish
71
Clamper/Puller
• Composite is pulled through the entire process by a gripper/puller system
72
Cut-off Process
• Diamond abrasive cut-off saw cuts composite to length
• Synchronized with movement of the pullers
• Activated by a preset cut-to-length limit switch