1 TO 20 FAIRVIEW - Hose & Fittings Canada Inc. · 2018-10-02 · Water quality can significantly...

STEELADAPTERS

BALLVALVES

QUICKDISCONNECTS

GAUGES

CABINETS,TOOLS &ACCESSORIES

HYDRAULICHOSE

HOSE ENDCOUPLINGS

SECTION

A1 TO 20

SECTION

B21 TO 44

SECTION

C45 TO 66

SECTION

D67 TO 68

SECTION

E69 TO 78

SECTION

F79 TO 80

SECTION

G81 TO 88

NAHAD $3.00COPYRIGHT 2011

®

Canadian• Vancouver BC• Calgary AB• Edmonton AB• Saskatoon SK• Winnipeg MB• Toronto ON• Montreal PQ• Moncton NB• Halifax NS

U.S.A.• Wheatfield NY• Woburn MA• Elkhart IN

FAIRVIEWFITTINGS & Manufacturing

WAREHOUSE / SALES LOCATIONS

NO. 2011H

HYDRAULIC PRODUCTS

LA DÉFAILLANCE, LA MAUVAISE SÉLECTION OU LE MAUVAIS USAGE DES PRODUITS OU SYSTÈMES DÉCRITSCI-DESSOUS OU ARTICLES CONNEXES PEUT CAUSER LA MORT, DES BLESSURES CORPORELLES OU DESDOMMAGES MATÉRIELS.Ce document et les autres renseignements fournis par Fairview Fittings, ses filiales et distributeurs autorisés offrent desoptions de produits ou systèmes pour les utilisateurs ayant de l'expertise technique. Il est important d'analyser tous lesaspects de votre application et de revoir l'information concernant le produit ou système dans le catalogue actuel. À cause desconditions de fonctionnement et des applications variées de ces produits ou systèmes, l'utilisateur, par sa propre analyse etses essais, est le seul responsable de la sélection finale des produits et systèmes, en présumant que toutes les exigences derendement, de sécurité et d'avertissement sont respectées.AVERTISSEMENT RELATIF À L'EAU AGRESSIVELa qualité de l'eau peut avoir une incidence sur la durée de vie des produits Fairview. Analyser l'eau pour vérifier le niveaud'acidité, la présence d'éléments corrosifs ou d'autres polluants connexes, y compris le chlore, et traiter l'eau en conséquence.L'inobservation de cet avertissement annulera la garantie et pourrait causer la défaillance prématurée des tubes, des robinetset des raccords.Le produit décrit aux présentes, y compris mais sans s'y limiter, les caractéristiques du produit, spécifications, conceptions,disponibilité et prix sont sujets à changement par Fairview Fittings et ses filiales en tout temps et sans préavis.

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Fairview Fittings & Mfg., its subsidiaries and authorized distributors provide productand/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects ofyour application and review the information concerning the product or system, in the current catalogue. Due to the variety ofoperating conditions and applications for these products or systems, the user, through its own analysis and testing, is solelyresponsible for making the final selection of the products and systems and assuming that all performance, safety and warningrequirements are met. AGGRESSIVE WATER WARNING:Water quality can significantly influence the life of Fairview products. Test for corrosive elements, acidity and other relevantcontaminants, including chlorine and treat water appropriately. Failure to do so will void warranty and may lead to prematurefailure of tubes, valves and fittings.The product described herein, including without limitation, product features, specifications, designs, availability and pricing, aresubject to change by Fairview Fittings & Mfg. and its subsidiaries at any time without notice.

LA FALTA DE SELECCIÓN, UNA SELECCIÓN INADECUADA O EL USO INDEBIDO DE LOS PRODUCTOS, SISTEMAS OARTÍCULOS AFINES QUE SE DESCRIBEN AQUÍ PUEDEN CAUSAR LA MUERTE, LESIONES A LAS PERSONAS YDAÑOS A LA PROPIEDAD. Este documento, junto con otra información de parte de Fairview Fittings & Mfg., sus subsidiariasy distribuidores autorizados ofrecen opciones de productos o sistemas para que los usuarios que tengan pericia técnicarealicen una investigación posterior. Es importante que analice todos los aspectos de su aplicación y revise la información delpresente catálogo con respecto al producto o sistema. Debido a la diversidad de condiciones operativas y aplicaciones deestos productos o sistemas, el usuario - a través de su propio análisis y prueba - es el único responsable de hacer la selec-ción final de los productos y sistemas, y de que se cumplan todos los requisitos de rendimiento, seguridad y advertencia.

ADVERTENCIA DE AGUA AGRESIVA: La calidad del agua puede influir en forma significativa en la vida de los productosFairview. Haga los análisis necesarios para determinar si existen elementos corrosivos, acidez y otros contaminantespertinentes, incluso cloro, y trate al agua de manera adecuada.El incumplimiento de este requisito anulará la garantía y podría causar la falla prematura de los tubos, las válvulas y losaccesorios.Los productos que se describen en el presente, que incluyen sin ningún límite, las características, las especifica-ciones, los diseños, la disponibilidad y los precios de los productos, están sujetos a cambios sin aviso en cualquier momentopor parte de Fairview Fittings & Mfg. y sus subsidiarias.

Fairview Fittings & Manufacturing LimitedCanadian Head Office: Toronto Canada

Fairview Fittings & Manufacturing IncorporatedU.S.A. Corporate HQ: Wheatfield, New York

1.

SECTION A HYDRAULIC HOSEDIN 20023 4SH..............................................................................................7

GRIP-TITE HOSE (PUSH-ON) ....................................................................10

ORDERING HYDRAULIC HOSE ASSEMBLIES...........................................2

S.A.E. 100R1 TYPE AT..................................................................................3

S.A.E. 100R2 TYPE AT..................................................................................4

S.A.E. 100R3 .................................................................................................5

S.A.E. 100R4 .................................................................................................5

S.A.E. 100R5 .................................................................................................6

S.A.E. 100R12 ...............................................................................................7

S.A.E. 100R13 ...............................................................................................8

S.A.E. 100R14 ...............................................................................................8

S.A.E. 100R16 ...............................................................................................9

S.A.E. 100R17 ...............................................................................................9

SYNFLEX® S.A.E. 100R3.............................................................................12

SYNFLEX® S.A.E. 100R1.............................................................................12

SYNFLEX® S.A.E. 100R7 ......................................................................12 -14

SYNFLEX® S.A.E. 100R8 ......................................................................15, 16

SYNFLEX® S.A.E. 100R18...........................................................................17

SYNFLEX® 3V10 ..........................................................................................18

SYNFLEX® 3VE0..........................................................................................19

SYNFLEX® 3360 ..........................................................................................20

SYNFLEX® PART NUMBER LEGEND.........................................................11

SYNFLEX® CRIMP SPECIFICATIONS..................................................21, 40

SECTION B HOSE END COUPLINGSCOMPRESSION 100R1-AT, 100R2-AT, T1SN, T2SN, 100R3, 100R16 & 100R17........23 - 25

CRIMP SPECIFICATIONS AND INSTRUCTIONS ..........................21, 22, 40

BITE-TO-THE-WIRE 100R1-AT, 100R2-AT, T1SN, T2SN, 100R16 & 100R17 ..............26 - 28

BITE-TO-THE-WIRE 100R2, T2SN & 100R12 ................................... 31 - 33

BITE-TO-THE-WIRE 100R5 ....................................................................... 34

GRIP-TITE HOSE BRASS FITTINGS .........................................................39

HOSE INSERTS - STEEL............................................................................36

NON-SKIVE / BITE-TO-THE-WIRE ENDS 100R12............................29 & 30

ONE PIECE CRIMP ENDS - PTFE HOSE..................................................37

OPERATING & BURST PRESSURE CHART .............................................44

REUSABLE HOSE ENDS......................................................................34, 35

REUSABLE ENDS - PTFE HOSE ...............................................................38

SKIVE / BITE-TO-THE-WIRE ENDS DIN 20023 4SH & 100R13................30

SYNFLEX® SY-3R30, SY-30CT, SY-37AL, SY-3130, SY-3580 .............40, 41

SYNFLEX® ENDS FOR USE WITH SY-3R80, SY-3E80 .......................42, 43

SYNFLEX® ENDS FOR USE WITH SY-3360 ..............................................43

SECTION C STEEL ADAPTERSFLARE(37° S.A.E. ) SWIVEL ADAPTERS..........................................................45, 46

37° S.A.E. FLARE ADAPTERS..........................................................................47 - 50

37° S.A.E. FLARE BULKHEAD ADAPTERS.............................................................53

FLANGE ADAPTERS CODE 61 & 62.......................................................................51

FLANGE KITS ...........................................................................................................52

FLARELESS ADAPTERS..........................................................................................60

O-RING BOSS TO NPSM .........................................................................................65

O-RING FACE SEAL ADAPTERS .....................................................................57 - 59

O-RING BOSS ADAPTERS (S.A.E.) .................................................................54 - 56

PIPE ADAPTERS (S.A.E.) .................................................................................61 - 63

SWIVEL NPSM ADAPTERS (S.A.E.) ...............................................................64 & 65

STEEL METRIC & BSP ADAPTERS.........................................................................66

SECTION D BALL VALVESCARBON STEEL FULL PORT 2 PIECE DESIGN .....................................68

CARBON STEEL FULL PORT MEDIUM PRESSURE 2 PC DESIGN ........68

CARBON STEEL NPTF PORTS HIGH PRESSURE 3 PC DESIGN ..........68

CARBON STEEL ORB PORTS HIGH PRESSURE 3 PC DESIGN ............68

CARBON STEEL STANDARD PORT 1 PC BAR STOCK DESIGN ..........67

STAINLESS STEEL FULL PORT 2 PIECE ...............................................67

STAINLESS STEEL FULL PORT 2 PIECE DESIGN .................................68

STAINLESS STEEL FULL PORT HIGH PRESSURE 3 PC DESIGN..........68

STAINLESS STEEL STANDARD PORT 1 PIECE .....................................67

STAINLESS STEEL STANDARD PORT 1 PC BAR STOCK DESIGN ......67

SECTION E QUICK DISCONNECTSAEROQUIP FD51 INTERCHANGE .............................................................77

AGRICULTURAL INTERCHANGE...............................................................71

SNOW PLOW ..............................................................................................71

ISO “A” INTERCHANGE..............................................................................72

THREAD-TO-CONNECT (HIGH PRESSURE) INTERCHANGE.................72

HTMA FLUSH FACE....................................................................................73

HIGH PRESSURE FLUSH FACE / DRY BREAK........................................73

HYDRAULIC QUICK DISCONNECT CROSSOVER CHART......................69

ISO “B” INTERCHANGE..............................................................................70

SNAPTITE VALVED & NON-VALVED.................................................74 - 76

THREAD-TO-CONNECT (UNDER PRESSURE) ........................................78

CHECK VALVE CARBON STEEL ...............................................................78

SECTION F PRESSURE GAUGESLIQUID FILLED PRESSURE GAUGES ...............................................79, 80

PRESSURE GAUGE ACCESSORIES .......................................................80

SECTION G ACCESSORIESCARDBOARD STOCK BOXES ...................................................................81

NYLON SLEEVE..........................................................................................81

SPRING GUARD .........................................................................................81

ROTO REEL ................................................................................................81

HOSE CUT-OFF BLADES ...........................................................................81

STORAGE CABINETS - HEAVY GAUGE METAL ......................................82

SYNFLEX® SWAGERS, PUSHERS AND DIE TOOLS................................83

SYNFLEX® HOSE COUPLING TOOLS .......................................................84

HYDRAULIC CRIMPER...............................................................................85

CRIMPER COMPATIBILITY CHART ...........................................................86

BURST PRESSURE CHART.......................................................................87

TABLE OF CONTENTS

A

2.

ORDERING HYDRAULIC HOSE ASSEMBLIES

HOSE END CODE

CODE DESCRIPTIONFJ Female S.A.E. 37° SwivelFV Female NPSM SwivelFP Female PipeFS Female S.A.E. 45° SwivelJ5 Female Swivel 37° S.A.E. 45° ElbowJ9 Female Swivel 37° S.A.E. 90° ElbowJL Female Swivel 37° S.A.E. 90° Elbow (Long)S5 Female Swivel 45° S.A.E. 45° ElbowS9 Female Swivel 45° S.A.E. 90° ElbowMJ Male 37° S.A.E.MS Male 45° S.A.E.MI Male Inverted FlareI5 Male Inverted Flare 45° ElbowI9 Male Inverted Flare 90° Elbow

MO Male O-RingSO Male O-Ring Boss SwivelO9 Male O-Ring Boss 90° ElbowMP Male PipeSP Male Pipe SwivelP9 Male Pipe Swivel 90° ElbowRS Female O-Ring Face Seal R5 Female O-Ring Face Seal 45° Elbow R9 Female O-Ring Face Seal 90° Elbow ST Stand Pipe

ASSEMBLY TYPE CODESHydraulic Synflex

CODE TYPE CODE TYPEC Crimp Ends S Swage HoseR Reusable Ends T Twin-Line Hose

SIZE CODES

HOSE SIZE TUBE SIZE CODE02 1/8" A03 3/16" F04 1/4" B05 5/16" G06 3/8" C08 1/2" D10 5/8" I12 3/4" E16 1" H20 1-1/4" J24 1-1/2" K32 2" M

HOSE CODES

Length Tolerances for Hydraulic Hose Assembliesand Specified Hose Lengths.

Length ToleranceFor Lengths from 0 to and including 36" . . . . . . . .±1/4"For Lengths above 36" . . . . . . . . . . . . . . . . . .±1% of length

measured to thenearest 1/8 of an inch.

When ordering elbow on assemblies please notemeasurements are measured from the centre of

elbow to opposite end of assembly.

ASSEMBLY OVERALL LENGTH

The overall length of the Assembly is measured in InchesIncluding Hose Ends. (See above)Example: 2’ = 24.00

10’ = 120.0100’ = 1200.

Must fill all 5 spaces in the Overall Length Code

CODE LEGEND

HA HRT2 06 C 120.0 FV C MP C

1

2

3

4

5

6

1

2

3

4

5

6

5

6

**For Synflex Hose Assemblies Replace HA with SY

Hydraulic = HACODE HOSET1XX S.A.E. 100R1T2XX S.A.E. 100R2H4SH DIN 20023 4SHHR3X S.A.E. 100R3HR4X S.A.E. 100R4HR5X S.A.E. 100R5HR5H S.A.E. 100R5HTHR12 S.A.E. 100R12HR13 S.A.E. 100R13HTXX S.A.E. 100R14 PTFEHR16 S.A.E. 100R16HR17 S.A.E. 100R17

Synflex = SYCODE HOSE3R30 100R3 Hose3580 100R7/100R1 Hose3130 100R7 Hose37AL 100R7 Non-Conductive3R80 100R8 Hose3E80 100R8 Non-Conductive30CT 3000 P.S.I. Constant

Pressure Hose3360 3000 P.S.I. Constant

Pressure Hose

A

3.

S.A.E. HYDRAULIC HOSE

HIGH PRESSURE HOSE

Working Min. Burst Min. Bend Approx. Reel Actual I.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. Lengths

PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)T2-4-REEL 1/4 .593 5,000 20,000 4.00 .26 300T2-6-REEL 3/8 .750 4,000 16,000 5.00 .38 300T2-8-REEL 1/2 .875 3,500 14,000 7.00 .48 300T2-10-REEL 5/8 1.000 2,750 11,000 8.00 .50 250T2-12-REEL 3/4 1.187 2,250 9,000 9.50 .61 250T2-16-REEL 1 1.500 2,000 8,000 12.00 .95 150T2-20-CTN 1-1/4 1.902 1,625 6,500 16.50 1.38 130T2-24-CTN 1-1/2 2.150 1,300 5,250 20.00 1.69 130T2-32-CTN 2 2.650 1,150 4,650 25.00 2.12 130

For high pressure hydraulic service in the handling of most hydraulic fluids,gasoline, diesel fuels, lubricating oils and water. Not suitable for use withphosphate esters.• CONSTRUCTION:

Two Plies of Steel Wire Braid.• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube.• COVER: Oil, Weather and Flame-Resistant Black Synthetic Rubber Cover• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths and Carton Quantities see below.• FITTINGS: SC600 Compression Page 23 - 25

SC900 Bite-To-The-Wire Page 26 - 29SCTGW600 Bite-To-The-Wire Page 31 - 32SCTBW00 Bite-To-The-Wire Page 33SRT200 Reusable Page 34

• CRIMP SPECIFICATIONS: Page 20 - 22

MEDIUM PRESSURE HOSE


PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)T1-4-REEL 1/4 .531 2,750 11,000 4.00 .17 300T1-6-REEL 3/8 .687 2,250 9,000 5.00 .26 300T1-8-REEL 1/2 .812 2,000 8,000 7.00 .31 300T1-10-REEL 5/8 .930 1,500 6,000 8.00 .34 250T1-12-REEL 3/4 1.093 1,250 5,000 9.50 .47 250T1-16-REEL 1 1.437 1,000 4,000 12.00 .70 150T1-20-CTN 1-1/4 1.713 900 3,650 16.50 .84 130T1-24-CTN 1-1/2 1.992 725 2,900 20.00 1.07 130T1-32-CTN 2 2.520 580 2,300 25.00 1.48 130

For medium to high pressure hydraulic service in the handling of mosthydraulic fluids, gasoline, diesel fuels, lubricating oils and water. Notsuitable for use with phosphate esters.• CONSTRUCTION:

One Ply of Steel Wire Braid.• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube.• COVER: Oil, Weather and Flame-Resistant M.S.H.A. Approved Synthetic

Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths and Carton Quantities see below.• FITTINGS: SC600 Compression Page 23 - 25

SC900 Bite-To-The-Wire Page 26 - 29SRT100 Reusable Page 34


Koman R1AT

Koman R2AT

S.A.E. 100R2 TYPE ATEN853 2SN TWO WIRE BRAID (NON SKIVE)COVER IS NOT REMOVED

S.A.E. 100R1 TYPE ATEN853 1SN ONE WIRE BRAID (NON SKIVE)COVER IS NOT REMOVED

A

4.

HIGH PRESSURE HOSE


PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)T2SN-4-REEL 1/4 .593 5,800 23,200 4.00 .26 300T2SN-6-REEL 3/8 .750 4,785 19,140 5.00 .38 300T2SN-8-REEL 1/2 .875 3,988 15,950 7.00 .48 300T2SN-12-REEL 3/4 1.187 3,118 12,325 9.50 .61 200T2SN-16-REEL 1 1.500 2,393 9,425 12.00 .95 160

For high pressure hydraulic service in the handling of most hydraulic fluids,gasoline, diesel fuels, lubricating oils and water. Not suitable for use withphosphate esters.• CONSTRUCTION:

Two Plies of Steel Wire Braid.• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube.• COVER: Oil, Weather and Flame-Resistant Black Synthetic Rubber Cover• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths and Carton Quantities see below.• FITTINGS: SC600 Compression Page 23 - 25

SC900 Bite-To-The-Wire Page 26 - 28SCTGW600 Bite-To-The-Wire Page 31 - 32SCTBW00 Bite-To-The-Wire Page 33SRT200 Reusable Page 34


Meets or ExceedsS.A.E. 100R2 TYPE ATEN853 2SN TWO WIRE BRAID (NON SKIVE)COVER IS NOT REMOVED



PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)T1SN-4-REEL 1/4 .531 3,263 13,050 4.00 .17 300T1SN-6-REEL 3/8 .687 2,610 10,440 5.00 .26 300T1SN-8-REEL 1/2 .812 2,320 9,280 7.00 .31 300T1SN-12-REEL 3/4 1.093 1,523 6,090 9.50 .47 200T1SN-16-REEL 1 1.437 1,276 5,075 12.00 .70 160

For medium to high pressure hydraulic service in the handling of mosthydraulic fluids, gasoline, diesel fuels, lubricating oils and water. Notsuitable for use with phosphate esters.• CONSTRUCTION:

One Ply of Steel Wire Braid.• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube.• COVER: Oil, Weather and Flame-Resistant M.S.H.A. Approved

Synthetic Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths and Carton Quantities see below.• FITTINGS: SC600 Compression Page 23 - 25

SC900 Bite-To-The-Wire Page 26 - 28SRT100 Reusable Page 34


Meets or ExceedsS.A.E. 100R1 TYPE ATEN853 1SN ONE WIRE BRAID (NON SKIVE)COVER IS NOT REMOVED

S.A.E. / DIN EN853 HYDRAULIC HOSE

A

5.




PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HR3-4-REEL 1/4 .562 1,250 5,000 3.00 .11 300HR3-6-REEL 3/8 .750 1,125 4,500 4.00 .19 400HR3-8-REEL 1/2 .940 1,000 4,000 5.00 .27 350HR3-12-REEL 3/4 1.250 750 3,000 6.00 .45 275HR3-16-REEL 1 1.500 565 2,250 8.00 .57 170HR3-20-CTN 1-1/4 1.75 375 1,500 10.00 .65 50

For medium pressure hydraulic service in the handling of most hydraulicfluids, gasoline, diesel fuels, lubricating oils, air and water. Extensivelyused in high pressure car wash systems and recommended forapplications where long lengths are required. Not suitable for use withphosphate esters.

• CONSTRUCTION:Two Braids of Rayon Cord

• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube.• COVER: Oil, Weather and Abrasion-Resistant Synthetic Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths and Carton Quantities see below.• FITTINGS: SC600 Compression Page 23 - 25• CRIMP SPECIFICATIONS: Page 20 - 22

S.A.E. 100R3 TWO RAYON BRAIDS(NON SKIVE)COVER IS NOT REMOVED

SUCTION HOSE

Actual Hose Working Min. Burst Min. Bend Vacuum Approx. CoilI.D. O.D. Pressure Pressure Radius Service Wgt. / Ft. Length

PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (IN./HG) (LBS.) (FT.)HR4-12-100 * 3/4 1.250 300 1,200 3.00 29 .40 100HR4-16-100 * 1 1.500 250 1,000 4.00 29 .60 100HR4-20-100 * 1-1/4 1.750 200 800 6.00 29 .69 100HR4-24-100 * 1-1/2 2.000 150 600 7.00 29 .93 100HR4-32-100 * 2 2.500 100 400 8.00 29 1.20 100HR4-40-50 2-1/2 3.030 65 260 10.00 29 1.68 50HR4-48-50 3 3.540 55 220 12.00 29 2.00 50

For hydraulic suction (29 Inch/hg) and low pressure hydraulic return lines.Will handle petroleum based hydraulic fluids, diesel fuels, water andlubricating oils. Wire helix prevents collapsing under vacuum service. Notsuitable for use with phosphate esters.

• CONSTRUCTION:Two Textile Spiral Plies With Wire Helix.

• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube. • COVER: Oil, Weather and Abrasion-Resistant Synthetic Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: 50 FT. and 100 FT. Coils

* Sizes 3/4” to 2” are also available in 50 Ft. Coils• FITTINGS: SC600 Compression Page 23 - 25

(Up to 1-1/4 Size)S1100 and SO1100 Steel Hose Inserts Page 36


Meets or ExceedsPerformance CharacteristicsS.A.E. 100R4 TWO TEXTILE SPIRAL PLIESWITH WIRE HELIX(NON SKIVE)COVER IS NOT REMOVED

A

6.


Working Min. Burst Min. Bend Approx. ReelNominal Actual I.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. Length

PART No. I.D. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)

HR5-4-REEL 1/4 3/16 0.52 3,000 12,000 3.00 .16 250HR5-5-REEL 5/16 1/4 0.58 2,500 10,000 3.38 .18 250HR5-6-REEL 3/8 5/16 0.68 2,250 9,000 4.00 .22 250HR5-8-REEL 1/2 13/32 0.77 2,000 8,000 4.62 .27 250HR5-10-REEL 5/8 1/2 0.92 1,750 7,000 5.50 .34 250HR5-12-REEL 3/4 5/8 1.08 1,500 6,000 6.50 .42 250HR5-16-REEL 1 7/8 1.24 800 3,200 7.38 .44 165HR5-20-CTN 1-1/4 1-1/8 1.50 625 2,500 9.00 .52 100HR5-24-CTN 1-1/2 1-3/8 1.75 500 2,000 10.50 .62 100HR5-32-CTN 2 1-13/16 2.22 350 1,400 13.25 .93 100

S.A.E. 100R5 ONE WIRE BRAIDTWO COTTON BRAIDS (NON SKIVE)COVER IS NOT REMOVEDMEETS D.O.T. F.M.V.S.S. - 106

For medium pressure hydraulic service in the handling of most hydraulicfluids, gasoline, diesel fuels, lubricating oils, air and water. Recommendedfor power steering and power steering return lines, fuel filters, turbochargers, tilt lines, lube oil lines and machine tools. Not suitable for usewith phosphate esters.

• CONSTRUCTION: Textile inner braid with single wire braid reinforcement.• TUBE: Oil and heat-resistant synthetic rubber inner tube. • COVER: Textile outer braid and a cotton braided black cover.• COLOR: Black• TEMPERATURE:-40°F to +250°F, -40°C to +121°C• PACKAGING:For Reel Lengths and Carton Quantities see below.

All Sizes Available in 100 Ft. Coils. • FITTINGS: SCW500 Crimp Page 34

SR500 Reusable Page 35 • CRIMP SPECIFICATIONS: Page 20 -22

BLUE HIGH TEMPERATURE S.A.E. 100R5 HOSE

Working Min. Burst Min. Bend Approx. ReelNominal Actual I.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. Length

PART No. I.D. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)

HR5HT-4-REEL 1/4 3/16 0.52 3,000 12,000 3.00 .13 500HR5HT-5-REEL 5/16 1/4 0.58 3,000 12,000 3.38 .16 300HR5HT-6-REEL 3/8 5/16 0.67 2,250 9,000 4.00 .23 300HR5HT-8-REEL 1/2 13/32 0.76 2,000 8,000 4.62 .26 500HR5HT-10-REEL 5/8 1/2 0.93 1,750 7,000 5.50 .37 300HR5HT-12-REEL 3/4 5/8 1.08 1,500 6,000 6.50 .46 250HR5HT-16-REEL 1 7/8 1.27 800 3,200 7.38 .44 190HR5HT-20-CTN 1-1/4 1-1/8 1.50 625 2,500 9.00 .52 90HR5HT-24-CTN 1-1/2 1-3/8 1.75 500 2,000 10.50 .67 60HR5HT-32-CTN 2 1-13/16 2.22 300 1,200 13.25 .94 150

S.A.E. 100R5HIGH TEMPERATURE

ONE WIRE BRAIDTWO COTTON BRAIDS(NON-SKIVE)COVER IS NOT REMOVED

For high temperature, medium to high pressure hydraulic service in thehandling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils andwater. Recommended for power steering and power steering return lines, fuel filters, turbo chargers, tilt lines, lube oil lines, compressors and machinetools . Not suitable with phosphate esters.

• CONSTRUCTION: Textile inner braid with single wire braid reinforcement.• TUBE: Oil and heat-resistant synthetic rubber inner tube. • COVER: Textile outer braid and a cotton braided cover.• COLOR: Blue• TEMPERATURE: -49°F to +300°F, -55°C to +150°C • PACKAGING: For Reel Lengths and Carton Quantities see below.• FITTINGS: SCW500 Crimp Page 34

SR500 Reusable Page 35 • CRIMP SPECIFICATIONS: Page 20 - 22

A

7.

ULTRA-HIGH PRESSURE HOSE

Working Min. Burst Min. Bend Approx. Coil Actual I.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. Lengths

PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HRA4SH-12 3/4 1.27 6,000 24,000 9.50 1.13 130HRA4SH-16 1 1.52 5,500 22,000 12.00 1.35 130HRA4SH-20 1-1/4 1.79 5,000 20,000 16.50 2.41 130HRA4SH-24 1-1/2 2.11 4,200 16,800 20.00 3.21 130HRA4SH-32 2 2.68 3,600 14,400 25.00 4.44 130

For ultra high pressure hydraulic service in the handling of most hydraulicfluids, gasoline, diesel fuels, lubricating oils and water. Not suitable foruse with phosphate esters.

• CONSTRUCTION:Four Spirals of High Tensile Steel Wire Reinforcement.

• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube. • COVER: Oil, Weather and Flame-Resistant Synthetic Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C • PACKAGING: Coils• FITTINGS: SCAJ00MS (SKIVE) Bite-To-The-Wire Page 30

DIN 20023 4SH FOUR WIRE BRAID(SKIVE)COVER IS REMOVED

VERY HIGH PRESSURE HOSE

* Working Min. Burst Min. Bend Approx. Coil Actual I.D. Hose O.D. Pressure Pressure Radius Wgt. / Ft. Lengths

PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HRA12-6 3/8 .787 4,000 16,000 5.00 .44 130HRA12-8 1/2 .934 4,000 16,000 7.00 .56 130HRA12-12 3/4 1.210 4,000 16,000 9.50 .89 130HRA12-16 1 1.495 4,000 16,000 12.00 1.30 130HRA12-20 1-1/4 1.850 3,000 12,000 16.50 1.79 130HRA12-24 1-1/2 2.105 2,500 10,000 20.00 2.06 130HRA12-32 2 2.626 2,500 10,000 25.00 2.73 130

For very high pressure hydraulic service in the handling of most hydraulicfluids, diesel fuels, water and lubricating oils. Not suitable for use withphosphate esters.

• CONSTRUCTION:Four Spirals of High Tensile Steel Wire.

• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube.• COVER: Oil, Weather and Flame-Resistant M.S.H.A. Approved

Synthetic Rubber Cover.• TEMPERATURE: -40°F to +200°F, -40°C to +93°C• PACKAGING: Coils • FITTINGS: SCT900MS (Non-Skive) Bite-To-The-Wire Page 29

SCTGW600 (Non-Skive) Bite-To-The-Wire Page 31 - 32SCTBW00 (Non-Skive) Bite-To-The-Wire Page 33

• CRIMP SPECIFICATIONS: Page 20 - 22* S.A.E. WORKING PRESSURES SHOWN

S.A.E. 100R12FOUR SPIRAL WIRE(NON SKIVE / SKIVE)


A

Koman R12

8.


ULTRA-HIGH PRESSURE HOSE

Working Min. Burst Min. Bend Approx.Actual I.D. Hose O.D. Pressure Pressure Radius Wgt./Ft

PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS)HRA13-12 3/4 1.260 5,000 20,000 9.50 1.13HRA13-16 1 1.520 5,000 20,000 12.00 1.35HRA13-20 1-1/4 1.960 5,000 20,000 16.50 2.41HRA13-24 1-1/2 2.140 5,000 20,000 20.00 3.21HRA13-32 2 2.800 5,000 20,000 25.00 4.44

For ultra-high pressure hydraulic service in the handling of most hydraulicfluids, gasoline, diesel fuels, lubricating oils, and water. Not suitable for usewith phosphate esters.

• CONSTRUCTION:Four Spirals of High Tensile Steel Wire Reinforcement for 3/4" ID to 1" IDHose. • Six Spirals of High Tensile Steel Wire Reinforcement for 1-1/4" IDto 2" ID Hose.

• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube • COVER: Oil, Weather and Flame-Resistant Synthetic Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C • FITTINGS: SCAJ00MS (SKIVE) Bite-To-The-Wire Page 30• CRIMP SPECIFICATIONS: Page 20 - 22

S.A.E. 100R13TYPE AFOUR TO SIX WIRE BRAID(SKIVE) COVER IS REMOVED

STAINLESS STEEL BRAIDED PTFE HOSE(SMOOTH BORE)

PTFE hose can solve almost all “problem” applications. It is suitable for usewith steam, solvents, fuels, hydraulic fluids, most chemicals and acids.Vibration absorption, extra long shelf life, high temperature and pressureranges, make PTFE hose the most versatile hose in the industry today.

• CONSTRUCTION: Braided Outer Cover• TUBE: PTFE Inner Tube• COVER: Stainless Steel (TYPE 304)• TEMPERATURE: -65°F to + 450°F, -54°C to +232°C• PACKAGING: Bulk Coils - Random Lengths• FITTINGS: SCT400 One Piece Crimp Page 37

SR400 Reusable End Page 38• CRIMP SPECIFICATIONS: Page 22

Working Min. Burst Min. BendActual I.D. Hose O.D. Pressure Pressure Radius

PART No. Nominal I.D. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.)

HT-4 1/4 3/16 .30 3000 12000 1.50HT-5 5/16 1/4 .38 3000 12000 2.00HT-6 3/8 5/16 .44 2500 10000 3.50HT-8 1/2 13/32 .54 2000 8000 4.50HT-10 5/8 1/2 .63 1750 7000 5.00HT-12 3/4 5/8 .76 1500 6000 6.00HT-16 1 7/8 1.03 1000 4000 9.00HT-20 1-1/4 1-1/8 1.29 750 3000 16.00

NOTE: WORKING PRESSURE RATED AT +70°F, +21°C. ANY AMBIENT OR INTERNAL INCREASE IN TEMPERATURE WILL LOWER THE WORKING PRESSURE.

® REGISTERED DUPONT TRADE NAME

• TYPICAL USES INCLUDEPneumatic, hot oil lines, steam lines, foodprocessing, paint spray, compressor discharge,gases, chemical lines, steering lines, brakelines, high pressure hydraulic lines.

S.A.E. 100R14

A

9.

HIGH PRESSURE HOSE


PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HR16-4-REEL 1/4 .570 5,000 20,000 2.00 .23 300HR16-6-REEL 3/8 .720 4,000 16,000 2.50 .29 300HR16-8-REEL 1/2 .840 3,500 14,000 3.50 .38 300HR16-12-REEL 3/4 1.100 2,500 9,000 4.75 .56 250HR16-16-REEL 1 1.410 2,000 8,000 6.00 .78 150

For hydraulic service in the handling of most hydraulic fluids, gasoline,diesel fuels lubricating oils and water. Not suitable with phosphate esters.

• CONSTRUCTION:Two Plies of Steel Wire Braid.

• TUBE: Oil and Heat-Resistant Synthetic Rubber Inner Tube• COVER: Oil, Weather and Flame-resistant synthetic rubber cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths see below.• FITTINGS: SC600 Compression Page 23 - 25

SC900 Bite-To-The-Wire Page 26 - 28• CRIMP SPECIFICATIONS: Page 20 - 22



PART No. (IN.) (IN.) (P.S.I.) (P.S.I.) (IN.) (LBS.) (FT.)HR17-4-REEL 1/4 0.520 3,000 12,000 2.00 0.16 300HR17-6-REEL 3/8 0.660 3,000 12,000 2.50 0.24 300HR17-8-REEL 1/2 0.800 3,000 12,000 3.50 0.29 300HR17-12-REEL 3/4 1.160 3,000 12,000 4.75 0.55 250HR17-16-REEL 1 1.480 3,000 12,000 6.00 0.95 150

For medium to high pressure hydraulic service in the handling of mosthydraulic fluids, gasoline, diesel fuels lubricating oils and water. Not suitablewith phosphate esters.

• CONSTRUCTION:One Braid of High Tensile Steel Wire Reinforcement for 1/4" ID Through to1/2" ID hose. • Two Braids of High Tensile Steel Wire Reinforcement for3/4" ID Through to 1" ID Hose.

• TUBE: Oil and Heat Resistant Synthetic Rubber Inner Tube• COVER: Oil, Weather and Flame-Resistant Synthetic Rubber Cover.• COLOUR: Black• TEMPERATURE: -40°F to +250°F, -40°C to +121°C• PACKAGING: For Reel Lengths see below.• FITTINGS: SC600 Compression Page 23 - 25

SC900 Bite-To-The-Wire Page 26 - 28• CRIMP SPECIFICATIONS: Page 20 - 22


A

S.A.E. 100R16TWO WIRE BRAID(NON SKIVE)COVER IS NOT REMOVED

Koman R16

S.A.E. 100R17(NON-SKIVE)COVER IS NOT REMOVED

Koman R17

10.

RUBBER COVER GRIP-TITE HOSE (PUSH-ON)

GENERAL PURPOSE HOSE

Working ReelActual I.D. Hose O.D. Pressure Length

PART No. (IN.) (IN.) (P.S.I.) (FT.)760-4-REEL 1/4 1/2 300 575760-5-REEL 5/16 9/16 300 600760-6-REEL 3/8 5/8 300 460760-8-REEL 1/2 3/4 300 335760-10-REEL 5/8 29/32 300 260760-12-REEL 3/4 1 300 220

NOTE: WORKING PRESSURE RATED AT +70°F, +21°C. ANY AMBIENT OR INTERNAL INCREASE IN TEMPERATURE WILL LOWER THE WORKING PRESSURE.

FIBER COVER GRIP-TITE HOSE (PUSH-ON)

NOTE: WORKING PRESSURE RATED AT +70F°, +21°C. ANY AMBIENT OR INTERNAL INCREASE IN TEMPERATURE WILL LOWER THE WORKING PRESSURE.

A lightweight, flexible, low pressure, general purpose hose withone fiber braid reinforcement. Used for conveying hydraulic oils,mineral oils, antifreeze solutions, most agricultural sprays andother diluted chemical solutions.

• COVER: Fiber Covered.• COLOUR: Black• TEMPERATURE: -40°F to +200°F, -40°C to +93°C• PACKAGING: Bulk Reels.• FITTINGS: 700 Series Page 39

A lightweight, flexible, low pressure, general purpose hose withone fiber braid reinforcement. Used for conveying hydraulic oils,mineral oils, antifreeze solutions, most agricultural sprays andother diluted chemical solutions.

• COLOURS: Black (Standard), Blue, Green, Grey, Red• TEMPERATURE: -40°F to +200°F, -40°C to +93°C• PACKAGING: Bulk Reels• FITTINGS: 700 Series Page 39

THE SPECIAL BRAIDING PROCESS USED IN THEMANUFACTURE OF THIS HOSE PERMITS THE

USE OF GRIP-TITE FITTINGS, WHICHELIMINATES THE NEED FOR CLAMPS.

THE SPECIAL BRAIDING PROCESS USED IN THEMANUFACTURE OF THIS HOSE PERMITS THE

USE OF GRIP-TITE FITTINGS, WHICHELIMINATES THE NEED FOR CLAMPS.


PART No. (IN.) (IN.) (P.S.I.) (FT.)761-4-REEL 1/4 1/2 300 500761-4BLU-REEL 1/4 1/2 300 300761-4GRN-REEL 1/4 1/2 300 300761-4GRY-REEL 1/4 1/2 300 300761-4RED-REEL 1/4 1/2 300 300

761-5-REEL 5/16 5/8 300 500

761-6-REEL 3/8 5/8 300 500761-6BLU-REEL 3/8 5/8 300 300761-6GRN-REEL 3/8 5/8 300 300761-6GRY-REEL 3/8 5/8 300 300761-6RED-REEL 3/8 5/8 300 300


PART No. (IN.) (IN.) (P.S.I.) (FT.)761-8-REEL 1/2 3/4 300 500761-8BLU-REEL 1/2 3/4 300 500761-8GRN-REEL 1/2 3/4 300 500761-8GRY-REEL 1/2 3/4 300 500761-8RED-REEL 1/2 3/4 300 500

761-10-REEL 5/8 29/32 300 500761-10GRY-REEL 5/8 29/32 300 500

761-12-REEL 3/4 1 300 250761-12BLU-REEL 3/4 1 300 250761-12GRN-REEL 3/4 1 300 250761-12GRY-REEL 3/4 1 300 250761-12RED-REEL 3/4 1 300 250

A

11.

Synflex® PART NUMBER LEGEND

STANDARD HOSE

Synflex Hose Size Reel Series Length

HOSE SERIES CODE

STANDARD MULTI-LINE

3R30 R3 100R33580 58 100R7/100R13130 13 100R737AL 7A 100R7 Non-Conductive3R80 R8 100R83E80 E8 100R8 Non-Conductive30CT 0C 3000 PSI Constant Pressure

3360 36 3000 PSI Constant Pressure

REEL LENGTHS

000 = Bulk001 = 400 ft Random002 = 100 ft Continuous003 = 250 ft Random004 = 500 ft Random005 = 500 ft Continuous or Random

(depends on hose series)006 = 250 ft Continuous or Random

(depends on hose series)007 = 300 ft to 400 ft Continuous

(depends on hose series)008 = 200 ft Random

SIZE CODES

STANDARD HOSE MULTICODE I.D. CODE

02 1/8" 103 3/16" 204 1/4" 305 5/16" 406 3/8" 508 1/2" 610 5/8" N/A12 3/4" 716 1" 8

MULTI-LINE HOSE

Synflex Multi- No. of Hose Hose Reel Line Hoses Series Size Length

HOSE COUPLINGSExample: Coupling for 1/4" I.D. 3130 Hose x1/4" Male Pipe Rigid = PART No. SY-3903-04104

SY- 3903- 04 10 4Synflex Coupling Hose End End

Series Size Series Size

Example: 3130 100R7 HOSE, 1/4" I.D., 250FT ReelPART No: SY-3130-04003

SY- 3130- 04- 003

Example: 3130 TWIN-LINE 100R7 HOSE,1/4" I.D.PART No: SY-3770-21333

SY- 3770- 2 13 3 3

COUPLINGSERIES MATERIAL3903 Small O.D. Hose Steel390A Small O.D. Hose Stainless Steel390C Small O.D. Hose Brass390P Small O.D. Hose Monel

390H Large O.D. Hose Steel390L Large O.D. Hose Stainless Steel3906 Large O.D. Hose Brass390S Large O.D. Hose Monel

390N Extra Large O.D. Hose Steel

ENDSERIES 10 Male Pipe

14 Male Pipe Swivel

20 Female Pipe

24 Female NPSM Swivel

27 Male Pipe Swivel 90° Elbow

40 O-Ring Face Seal

44 O-Ring Face Seal 45° Elbow

47 O-Ring Face Seal 90° Elbow

50 Male 37° JIC

ENDSERIES 54 Female JIC Swivel

60 Female Swivel 37° JIC 45° Elbow

64 Female Swivel 37° JIC 90° Elbow

94 Male 45° S.A.E.

A0 Female S.A.E. Swivel

C4 Male Inverted Flare 45° Elbow

C7 Male Inverted Flare 90° Elbow

D0 Male O-Ring

J0 Stand Pipe

A

12.

Synflex® HOSE

3R30 LOW PRESSURE HOSE

Meets SAE 100R3 PerformanceSpecifications

3580 MEDIUM PRESSURE HOSE

FEATURES: Single Permanent Coupling Series Fits All Sizes • SAE100R7 Dimensions • Cut Resistant – Heavy Duty Design • Crush ResistantTYPICAL APPLICATIONS: For use with Lubrication Systems • MobileGeneral Hydraulics • Agriculture Equipment

• CONSTRUCTION: Braided Bronze Coated Steel Wire Reinforcement• TUBE: Polyester Core Tube.• COVER: Polyurethane Non-Perforated Cover.• COLOR: Black.• TEMPERATURE: -40°F to +225°F, -40°C to +107°C

or to +140°F, +60°C With Water-Based or Fire Resistant Fluids. • FITTINGS: SY-3903 Page 40 - 41• CRIMP SPECIFICATIONS: Page 20

Meets or exceedsSAE 100R1 and 100R7Performance Specifications

Min. Bend Working Min. Burst Approx. ReelActual I.D. Hose O.D. Radius Pressure Pressure Wgt./Ft. Length

PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3R30-03003 3/16 .423 1 1,750 7,000 .036 250SY-3R30-04003 1/4 .487 1-1/4 1,500 6,000 .053 250SY-3R30-06003 3/8 .637 2 1,250 5,000 .081 250SY-3R30-08003 1/2 .818 3 1,000 4,000 .141 250

FEATURES: Low Volumetric Expansion • Rugged DesignTYPICAL APPLICATIONS: For use with Low Pressure Hydraulics (Eg.Hospital Beds) Hand Tools: Air Power Tools (Eg. Impact Tools, Nail Guns,Stapler Guns, Tire Inflation) • Lubrication Systems • High PressurePneumatic Systems • Pressure Wash Hose • Water Hand Cooling Systems

• CONSTRUCTION: Spiraled Synthetic Fiber Reinforcement(-03 thru -06, -08 is Braided)

• TUBE: Nylon-Lined Core Tube.• COVER: Perforated Polyurethane Cover.• COLOR: Black.• TEMPERATURE: -40°F to +212°F, -40°C to +100°C

or to +150°F, +66°C With Water-Based or Fire Resistant Fluids• FITTINGS: SY-3903 Page 40 - 41• CRIMP SPECIFICATIONS: Page 20


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3580-04004 1/4 .485 1-3/4 3,500 14,000 .103 500SY-3580-06004 3/8 .645 2-1/4 3,250 13,000 .181 500SY-3580-08001 1/2 .765 3-1/4 3,000 12,000 .207 400SY-3580-12006 3/4 1.065 6 2,250 9,000 .336 200

A

13.

Synflex® HOSE

3130 MEDIUM PRESSURE HOSE

Meets SAE 100R7Specifications

3130 TWIN-LINE MEDIUM PRESSURE HOSE


FEATURES: Long Continuous Lengths • Low Elongation • Best Value100R7 HoseTYPICAL APPLICATIONS: For use with General Hydraulics • MaterialHandling • Forklift • High Pressure Gas Transfer • Chemical Transfer

• CONSTRUCTION: Spiraled or Braided Synthetic Fiber Reinforcement• TUBE: Nylon-Lined Core Tube• COVER: Perforated Polyurethane Cover• COLOR: Black • TEMPERATURE: -40°F to +212°F, -40°C to +100°C


FEATURES: Long Continuous Lengths • Low Elongation • Best Value100R7 HoseTYPICAL APPLICATIONS: For use with General Hydraulics • MaterialHandling • Forklift • High Pressure Gas Transfer • Chemical Transfer

• CONSTRUCTION: Spiraled or Braided Synthetic Fiber Reinforcement• TUBE: Nylon-Lined Core Tube• COVER: Perforated Polyurethane Cover• COLOR: Black• TEMPERATURE: -40°F to +212°F, -40°C to +100°C

or to +150°F, +66°C With Water-Based or Fire Resistant Fluids.• FITTINGS: SY-3903 Page 40 - 41• CRIMP SPECIFICATIONS: Page 20


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3130-02003** 1/8 .335 1/2 2,500 10,000 .025 250SY-3130-03003 3/16 .427 3/4 3,000 12,000 .046 250SY-3130-04003 1/4 .510 1-1/4 3,000 12,000 .057 250SY-3130-04005 1/4 .510 1-1/4 3,000 12,000 .057 500SY-3130-05003 5/16 .594 1-3/4 2,500 10,000 .069 250SY-3130-05005 5/16 .594 1-3/4 2,500 10,000 .069 500SY-3130-06003 3/8 .669 2 2,250 9,000 .095 250SY-3130-06005 3/8 .669 2 2,250 9,000 .095 500SY-3130-08001 1/2 .816 3 2,000 8,000 .141 400SY-3130-08003 1/2 .818 3 2,000 8,000 .141 250SY-3130-12008 3/4 1.067 5 1,250 5,000 .193 200SY-3130-16008 1 1.340 8 1,000 4,000 .264 200


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3770-21333 1/4 .510 1-1/4 3,000 12,000 .114 250SY-3770-21343 5/16 .594 1-3/4 2,500 10,000 .138 250SY-3770-21353 3/8 .669 2 2,250 9,000 .190 250SY-3770-21363 1/2 .816 3 2,000 8,000 .282 250

** S.A.E. specifications 100R7 does not apply to 1/8" size: The nylon core tube is a single-wall design and is not bonded to the reinforcement.

A

14.

Synflex® HOSE

37AL Non-Conductive MEDIUM PRESSURE HOSE

Meets or ExceedsSAE 100R7 SpecificationsComplies With ANSI A92.2 for VehicleMounted Aerial Devices

37AL TWIN-LINE Non-Conductive MEDIUM PRESSURE HOSE

Meets or ExceedsSAE 100R7 SpecificationsComplies With ANSI A92.2 for VehicleMounted Aerial Devices

FEATURES: SAE J517 Non-Conductive Hose Construction • Less Than50 Micro-Amperes Leakage When Subjected to 75,000 volts/ft for 5Minutes • Abrasion Resistant Cover • UV Resistant Cover • Can Use BothPermanently Attached and Reusable Couplings • Long Continuous Lengths• Flexible in Low TemperaturesTYPICAL APPLICATIONS: Electric Utility Truck Hydraulic Systems •Mobile Equipment Picker • Utility Vehicles

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Polyester Core Tube• COVER: Non-perforated Non-Stick Polyurethane Cover• COLOR: Orange• TEMPERATURE: -65°F to +212°F, -54°C to +100°C

or to +140°F, +60°C With Water-Based or Fire Resistant Fluids • FITTINGS: SY-3903 Page 40 - 42• CRIMP SPECIFICATIONS: Page 20


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-37AL-03003 3/16 .425 3/4 3,000 12,000 .048 250SY-37AL-03005 3/16 .425 3/4 3,000 12,000 .048 500SY-37AL-04003 1/4 .485 1-1/4 3,000 11,000 .060 250SY-37AL-04005 1/4 .485 1-1/4 3,000 11,000 .060 500SY-37AL-05003 5/16 .580 1-3/4 3,000 10,000 .075 250SY-37AL-05005 5/16 .580 1-3/4 3,000 10,000 .075 500SY-37AL-06003 3/8 .635 2 3,000 9,000 .095 250SY-37AL-06005 3/8 .635 2 3,000 9,000 .095 500SY-37AL-08003 1/2 .815 3 3,000 9,000 .143 250SY-37AL-08007 1/2 .815 3 3,000 9,000 .143 400


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3770-27A33 1/4 .485 1-1/4 3,000 11,000 .120 250SY-3770-27A43 5/16 .580 1-3/4 3,000 10,000 .150 250SY-3770-27A53 3/8 .635 2 3,000 9,000 .190 250SY-3770-27A63 1/2 .815 3 3,000 9,000 .286 250

FEATURES: SAE J517 Non-Conductive Hose Construction • Less Than 50Micro-Amperes Leakage When Subjected to 75,000 volts/ft for 5 Minutes •Abrasion Resistant Cover • UV Resistant Cover • Can Use Both PermanentlyAttached and Reusable Couplings • Long Continuous Lengths • Flexible inLow TemperaturesTYPICAL APPLICATIONS: Electric Utility Truck Hydraulic Systems • MobileEquipment Picker • Utility Vehicles

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Polyester Core Tube• COVER: Non-perforated Non-Stick Polyurethane Cover• COLOR: Orange• TEMPERATURE: -65°F to +212°F, -54°C to +100°C


A

15.

3R80 HIGH PRESSURE HOSE


3R80 TWIN-LINE HIGH PRESSURE HOSE


FEATURES: Long Life in Impulse Cycling and Flexing • Designed forPermanent or Reusable Couplings TYPICAL APPLICATIONS: General Hydraulic Systems • Hydraulic Tools •Mobile Equipment • High Pressure Pneumatic Systems • High PressureChemical Transfer

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Nylon Core Tube• COVER: Perforated Polyurethane Cover• COLOR: Black• TEMPERATURE: -40°F to +212°F, -40°C to +100°C

or to +150°F, +66°C With Water-Based or Fire Resistant Fluids• FITTINGS: SY-390H Page 43 - 44• CRIMP SPECIFICATIONS: Page 20

FEATURES: Long Life in Impulse Cycling and Flexing • Designed forPermanent or Reusable Couplings TYPICAL APPLICATIONS: General Hydraulic Systems • Hydraulic Tools• Mobile Equipment • High Pressure Pneumatic Systems • High PressureChemical Transfer

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Nylon Core Tube• COVER: Perforated Polyurethane Cover• COLOR: Black • TEMPERATURE:-40°F to +212°F, -40°C to +100°C


Synflex® HOSE


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3R80-03003 3/16 .515 1-1/2 5,000 20,000 .077 250SY-3R80-04003 1/4 .625 2 5,000 20,000 .118 250SY-3R80-06003 3/8 .765 2-1/2 4,000 16,000 .148 250SY-3R80-08003 1/2 .892 4 3,500 14,000 .190 250SY-3R80-12008 3/4 1.138 6-1/2 2,250 9,000 .256 200SY-3R80-16008 1 1.468 10 2,000 8,000 .385 200


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3770-2R833 1/4 .625 2 5,000 20,000 .236 250SY-3770-2R853 3/8 .765 2-1/2 4,000 16,000 .296 250SY-3770-2R863 1/2 .892 4 3,500 14,000 .380 250

A

16.

Synflex® HOSE

3E80 Non-Conductive HIGH PRESSURE HOSE


3E80 TWIN-LINE Non-Conductive HIGH PRESSURE HOSE


FEATURES: SAE J517 Non-Conductive Hose Construction. Less Than50 Micro-Amperes Leakage When Subjected to 75,000 volts/ft for 5Minutes • Long Life for Impulse Cycling and Flexing • UV Resistant Cover• Designed for Permanent and Reusable CouplingsTYPICAL APPLICATIONS: General Hydraulic Systems That May ContactHigh Voltage Sources • Aerial Equipment • Mobile Machinery • RescueTools

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Nylon Core Tube• COVER: Polyurethane Non- Perforated Cover• COLOR: Orange, NON-CONDUCTIVE Marking and Color Code• TEMPERATURE: -40°F to +212°F, -40°C to +100°C


FEATURES: SAE J517 Non-Conductive Hose Construction. Less Than50 Micro-Amperes Leakage When Subjected to 75,000 volts/ft for 5Minutes • Long Life for Impulse Cycling and Flexing • Designed for Permanent and Reusable CouplingsTYPICAL APPLICATIONS: General Hydraulic Systems That May Contact High Voltage Sources • Aerial Equipment • Mobile Machinery • RescueTools

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Nylon Core Tube• COVER: Polyurethane Non- Perforated UV Resistant Cover• COLOR: Orange, NON-CONDUCTIVE Marking and Color Code• TEMPERATURE: -40°F to +212°F, -40°C to +100°C



PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3E80-04003 1/4 .625 2 5,000 20,000 .118 250SY-3E80-06003 3/8 .765 2-1/2 4,000 16,000 .148 250SY-3E80-08003 1/2 .892 4 3,500 14,000 .190 250


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3770-2E833 1/4 .625 2 5,000 20,000 .236 250SY-3770-2E853 3/8 .765 2-1/2 4,000 16,000 .296 250SY-3770-2E863 1/2 .892 4 3,500 14,000 .380 250

A

17.

Spectra 30CT CONSTANT PRESSURE HOSE

Meets or ExceedsSAE 100R18 Specifications

Spectra 30CT TWIN-LINE CONSTANT PRESSURE HOSE

Meets or ExceedsSAE 100R18 Specifications

FEATURES: Highly Flexible, Even in Cold Temperatures • Small OD •Lightweight Yet Rugged ConstructionTYPICAL APPLICATIONS: Forklift • Construction • General Hydraulics •Chemical and Gas Transfer • Agricultural Equipment • Material Handling •Freezer Applications • Machines Tools and Robotics • LubricationEquipment • Portable Hydraulic Tools

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Polymeric Core Tube• COVER: Non-Stick Perforated Polymeric Cover• COLOR: Black• TEMPERATURE: -65°F to +200°F, -54°C to +94°C,

With Water-Based or Fire Resistant Fluids• FITTINGS: SY-3903 Page 40 - 42• CRIMP SPECIFICATIONS: Page 20

FEATURES: Highly Flexible, Even in Cold Temperatures • Small OD •Lightweight Yet Rugged ConstructionTYPICAL APPLICATIONS: • Forklift • Construction • General Hydraulics• Chemical and Gas Transfer • Agricultural Equipment • MaterialHandling • Freezer Applications • Machines Tools and Robotics •Lubrication Equipment • Portable Hydraulic Tools

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Polymeric Core Tube• COVER: Non-Stick Perforated Polymeric Cover• COLOR: Black• TEMPERATURE: -65°F to +200°F, -54°C to +94°C,

With Water-Based or Fire Resistant Fluids• FITTINGS: SY-3903 Page 40 - 42• CRIMP SPECIFICATIONS: Page 20

Synflex® HOSE


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-30CT-04003 1/4 .478 1-1/4 3,000 12,000 .060 250SY-30CT-05003 5/16 .610 1-3/4 3,000 12,000 .080 250SY-30CT-06003 3/8 .660 2 3,000 12,000 .122 250SY-30CT-08003 1/2 .850 3-1/2 3,000 12,000 .150 250


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3770-20C33 1/4 .478 1-1/4 3,000 12,000 .120 250SY-3770-20C43 5/16 .610 1-3/4 3,000 12,000 .160 250SY-3770-20C53 3/8 .660 2 3,000 12,000 .244 250SY-3770-20C63 1/2 .850 3-1/2 3,000 12,000 .300 250

A

18.

Synflex® HOSE

Example:SY-3V10-06, 600 Inches Overall Length, 3/8 Male Pipe Ends. = SY3V1006S600.0MPCMPC

Other configurations are available upon request.See page 11 for other assembly configuration codes.

Synflex 3V10 Hose isAAVVAILABLE ONLAILABLE ONLYY

as CompletedAssemblies.

3V10 VERY HIGH PRESSURE HOSE

3V10 ASSEMBLY PART NUMBER CHART

FEATURES: Compact Size • Low Elongation • Designed for Permanent High Pressure Couplings With Hose Guards • LightweightTYPICAL APPLICATIONS: High Pressure Hydraulic Tools • RescueEquipment and Tools • High Pressure Test Equipment

• CONSTRUCTION: Spiraled High Tensile Aramid Fiber Reinforcement• TUBE: Nylon Lined Core Tube• COVER: Perforated Polyurethane Cover• COLOR: Black• TEMPERATURE: -40°F to +150°F, -40°C to +66°C • FACTORY ASSEMBLIES: Below

Min. Bend Working Min. Burst Approx.Actual I.D. Hose O.D. Radius Pressure Pressure Wgt./Ft.

PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.)SY-3V10-03 3/16 0.520 1-1/2 10,000 40,000 .081SY-3V10-04 1/4 0.595 2-1/2 10,000 40,000 .106SY-3V10-06 3/8 0.780 3 8,000 32,000 .164

SY 3V10 06 S 600.0 MP C MP C

SYNFLEX HOSE SIZE LINE OVERALL HOSE SIZE HOSE SIZECODE CODE LENGTH END END

SIZE SIZECODE TUBE CODE

02 1/8 A03 3/16 F04 1/4 B05 5/16 G06 3/8 C08 1/2 D10 5/8 I12 3/4 E16 1 H

3V10 Hose AssemblyConstruction• Synflex 3V10 Hose• 390V Permanent Steel Couplings• 45JO Hose Guard• Warning Tag

HOSE END CODEMP Male PipeFJ Female JIC Swivel

LINE CODES Single LineT Twin Line

A

19.

Synflex® HOSE

Other configurations are available upon request.See page 11 for other assembly configuration codes.

SY 3VE0 06 S 600.0 MP C MP C

SYNFLEX HOSE SIZE LINE OVERALL HOSE SIZE HOSE SIZECODE CODE LENGTH END END

Example:SY-3VE0-06, 600 Inches Overall Length, 3/8 Male Pipe Ends. = SY3VE006S600.0MPCMPC

3VE0 Non-Conductive VERY HIGH PRESSURE HOSE

FEATURES: • SAE J517 Non-Conductive Hose Construction. Less Than50 Micro Amperes Leakage When Subjected to 75,000 volts/ft for 5 Minutes• Compact Size • Low Elongation • UV Resistant Cover • Designed for Permanent High Pressure Couplings With Hose GuardsTYPICAL APPLICATIONS: General Hydraulic Systems That May ContactHigh Voltage Sources • Rescue Equipment and Tools • Mobile Machinery •Aerial Equipment

• CONSTRUCTION: Spiraled High Tensile Aramid Fiber Reinforcement• TUBE: Nylon Lined Core Tube• COVER: Polyurethane Non-Perforated Cover, NON-CONDUCTIVE

Marking and Color Code• COLOR: Orange• TEMPERATURE: -40°F to +150°F, -40°C to +66°C• FACTORY ASSEMBLIES: Below

3VE0 ASSEMBLY PART NUMBER CHART

SIZE SIZECODE TUBE CODE

02 1/8 A03 3/16 F04 1/4 B05 5/16 G06 3/8 C08 1/2 D10 5/8 I12 3/4 E16 1 H

3VE0 Hose AssemblyConstruction• Synflex 3VEO Hose• 390V Permanent Steel Couplings• 45JO Hose Guard• Warning Tag

HOSE END CODEMP Male PipeFJ Female JIC Swivel

LINE CODES Single LineT Twin Line

Min. Bend Working Min. Burst Approx.Actual I.D. Hose O.D. Radius Pressure Pressure Wgt./Ft.

PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.)SY-3VE0-03 3/16 0.520 1-1/2 10,000 40,000 .081SY-3VE0-04 1/4 0.595 2-1/2 10,000 40,000 .106SY-3VE0-06 3/8 0.780 3 8,000 32,000 .164

Synflex 3VE0 Hose isAAVVAILABLE ONLAILABLE ONLYY

as CompletedAssemblies.

A

20.

Synflex® HOSE

3360 CONSTANT PRESSURE HOSEFEATURES: Designed for Severe Flexing at Low Temperatures.TYPICAL APPLICATIONS: Hydraulic systems operating in ColdEnvironments • Tree Delimber Applications

• CONSTRUCTION: Braided Synthetic Fiber Reinforcement• TUBE: Nylon Lined Core Tube• COVER: Polyester Cover• COLOR: Black • TEMPERATURE:-40°F to +212°F, -40°C to +100°C

or to +150°F, +66°C With water based or Fire Retardant Fluids.• FITTINGS: SY-390N Crimp Page 44• CRIMP SPECIFICATIONS: Page 20


PART No. (IN.) (IN.) (IN.) (P.S.I) (P.S.I.) (LBS.) (FT.)SY-3360-12003 3/4 1.238 5 3,000 12,000 .354 110

A

WETLINE KITS

Koman R2AT

100R4

WET-KIT1 CONTENTS ( 12Ft Length Kit ):PART No. DESCRIPTION QTY.BI-125-J 1-1/4” STEEL COMBINATION NIPPLE 4HC2-175 T-BOLT HOSE CLAMP (ALL STAINLESS) 4HR4-20-CUT 1-1/4” SUCTION HOSE 12 Ft.T2-16-CUT 1” TYPE II HYDRAULIC HOSE 12 Ft.QD-BTTWC16-16F 1” FD51 INTERCHANGE HYD. COUPLER 1QD-BTTWN16-16F 1” FD51 INTERCHANGE HYD. NIPPLE 1S1120-JH 1-1/4” PIPE TO 1” NPSM SWIVEL 1SC925-16H ONE PIECE CRIMP ENDS - MALE PIPE 2

WET-KIT2 CONTENTS ( 16Ft Length Kit ):PART No. DESCRIPTION QTY.BI-125-J 1-1/4” STEEL COMBINATION NIPPLE 4HC2-175 T-BOLT HOSE CLAMP (ALL STAINLESS) 4HR4-20-CUT 1-1/4” SUCTION HOSE 16 Ft.T2-16-CUT 1” TYPE II HYDRAULIC HOSE 16 Ft.QD-BTTWC16-16F 1” FD51 INTERCHANGE HYD. COUPLER 1QD-BTTWN16-16F 1” FD51 INTERCHANGE HYD. NIPPLE 1S1120-JH 1-1/4” PIPE TO 1” NPSM SWIVEL 1SC925-16H ONE PIECE CRIMP ENDS - MALE PIPE 2

Samples of Kits Below

Wet Kits (or wetline kits) installed on the PTO (Power Take Off) of trucks or semi-trucks. Many different accessories areinstalled on these trucks, like booms and cranes. The hydraulic pump is activated by the truck’s Power Take Off.These accessories need the hydraulic pump to operate.

21.

B

SWAGE / PUSHER CHART FOR Synflex® ENDS3R30 SWAGEPART No. DIE #SY-3R30-03003 SY-4540-3W300SY-3R30-04003 SY-4540-3W400SY-3R30-06003 SY-4540-3W600SY-3R30-08003 SY-4540-308003580SY-3580-04004 SY-4540-3S400SY-3580-06004 SY-4540-30600SY-3580-08001 SY-4540-30800SY-3580-12006 SY-4540-312003130SY-3130-02003 SY-4540-30300SY-3130-03003 SY-4540-30300SY-3130-04003 SY-4540-30400SY-3130-04005 SY-4540-30400SY-3130-05003 SY-4540-30500SY-3130-05005 SY-4540-30500SY-3130-06003 SY-4540-30600SY-3130-06005 SY-4540-30600SY-3130-08001 SY-4540-30800SY-3130-08003 SY-4540-30800SY-3130-12008 SY-4540-31200SY-3130-16008 SY-4540-316003130SY-3770-21333 SY-4540-30400SY-3770-21343 SY-4540-30500SY-3770-21353 SY-4540-30600SY-3770-21363 SY-4540-3080037AL NON-CONDUCTIVESY-37AL-03003 SY-4540-30300SY-37AL-03005 SY-4540-30300SY-37AL-04003 SY-4540-3W400SY-37AL-04005 SY-4540-3W400SY-37AL-05003 SY-4540-30500SY-37AL-05005 SY-4540-30500SY-37AL-06003 SY-4540-30600SY-37AL-06005 SY-4540-30600SY-37AL-08003 SY-4540-30800SY-37AL-08007 SY-4540-3080037AL TWIN-LINE NON CONDUCTIVESY-3770-27A33 SY-4540-3W400SY-3770-27A43 SY-4540-30500SY-3770-27A53 SY-4540-30600SY-3770-27A63 SY-4540-308003R80 HIGH PRESSURE SY-3R80-03003 SY-4540-H0300SY-3R80-04003 SY-4540-40400SY-3R80-06003 SY-4540-H0600SY-3R80-08003 SY-4540-H0800SY-3R80-12008 SY-4540-H1200SY-3R80-16008 SY-4540-H16003R80 TWIN-LINESY-3770-2R833 SY-4540-H0400SY-3770-2R853 SY-4540-H0600SY-3770-2R863 SY-4540-H08003E80 NON-CONDUCTIVESY-3E80-04003 SY-4540-H0400SY-3E80-06003 SY-4540-H0600SY-3E80-08003 SY-4540-H08003E80 TWIN-LINE NON-CONDUCTIVESY-3770-2E833 SY-4540-H0400SY-3770-2E853 SY-4540-H0600SY-3770-2E863 SY-4540-H0800SPECTRA 30CT CONSTANT PRESSURESY-30CT-04003 SY-4540-3W400SY-30CT-05003 SY-4540-30500SY-30CT-06003 SY-4540-30600SY-30CT-08003 SY-4540-H0800SPECTRA 30CTTWIN-LINESY-3770-20C33 SY-4540-3W400SY-3770-20C43 SY-4540-30500SY-3770-20C53 SY-4540-30600SY-3770-20C63 SY-4540-H08003V10 VERY HIGH PRESSURESY-3V10-03SY-3V10-04SY-3V10-063360 CONSTANT PRESSURESY-3360-12003 SY-4540-N120034BA BREATHING AIR HOSE SY-34BA-06003 SY-4540-H060034PW PURE WATER HOSE SY-34PW-04003 SY-4540-30400SY-34PW-06003 SY-4540-30600SY-34PW-08003 SY-4540-30800SY-34PW-12003 SY-4540-H1200SY-34PW-160033440 MOISTURE-LOC HOSESY-3440-04003 SY-4540-30400SY-3440-06003 SY-4540-30600SY-3440-08003 SY-4540-30800SY-3440-12003 SY-4540-H1200SY-3440-16003

MALE PIPE RIGID PUSHER PART No. FITTINGSSY-3903-02102 SY-4599-MP023SY-3903-02104 SY-4599-MP026

MALE PIPE RIGID PUSHER PART No. FITTINGSSY-3903-03102 SY-4599-MP001SY-3903-03104 SY-4599-MP004SY-3903-03106 SY-4599-MP005SY-3903-04102 SY-4599-MP002SY-3903-04104 SY-4599-MP004SY-3903-04106 SY-4599-MP005SY-3903-04108 SY-4599-MP009SY-3903-05104 SY-4599-MP004SY-3903-05106 SY-4599-MP005SY-3903-06104 SY-4599-MP005SY-3903-06106 SY-4599-MP005SY-3903-06108 SY-4599-MP009SY-3903-08104 SY-4599-MP008SY-3903-08106 SY-4599-MP008SY-3903-08108 SY-4599-MP009SY-3903-08112 SY-4599-MP011SY-3903-12108 SY-4599-MP011SY-3903-12112 SY-4599-MP011SY-3903-16116 SY-4599-MP013

SY-390H-03102 SY-4599-MP001SY-390H-03104 SY-4599-MP004SY-390H-03106 SY-4599-MP005SY-390H-04102 SY-4599-MP002SY-390H-04104 SY-4599-MP004SY-390H-04106 SY-4599-MP005SY-390H-04108 SY-4599-MP009SY-390H-05104 SY-4599-MP004SY-390H-06104 SY-4599-MP005SY-390H-06106 SY-4599-MP005SY-390H-06108 SY-4599-MP009SY-390H-08106 SY-4599MP008SY-390H-08108 SY-4599-MP009SY-390H-08112 SY-4599-MP011SY-390H-10108 SY-4599-MP011SY-390H-12108 SY-4599-MP011SY-390H-12112 SY-4599-MP011SY-390H-16116 SY-4599-MP013

SY-390N-12112 SY-4599-MP011SY-390N-16116 SY-4599-MP01345 DEG MALE RIGIDSY-3903-03943 SY-4599-MP001SY-3903-03944 SY-4599-MP001SY-3903-04945 SY-4599-MP002SY-3903-05946 SY-4599-MP005SY-3903-06945 SY-4599-MP005SY-3903-06946 SY-4599-MP005SY-3903-08946 SY-4599-MP008SY-3903-08948 SY-4599-MP008SY-3903-12950 SY-4599-MP011SY-3903-12952 SY-4599-MP011SY-3903-16956 SY-4599-FPO23

SY-3903-03943 SY-4599-MP001SY-3903-03944 SY-4599-MP001SY-3903-04945 SY-4599-MP002SY-3903-06946 SY-4599-MP005SY-3903-08948 SY-4599-MP008SY-3903-12950 SY-4599-MP011SY-3903-12952 SY-4599-MP011SY-3903-16956 SY-4599-FPO23MALE ORING ST THREADSY-3903-02D02 SY-4599-MP001SY-3903-03D04 SY-4599-MP001SY-3903-04D05 SY-4599-MP002SY-3903-04D06 SY-4599-MP004SY-3903-05D04 SY-4599-MP004SY-3903-05D05 SY-4599-MP004SY-3903-05D06 SY-4599-MP004SY-3903-06D06 SY-4599-MP005SY-3903-06D08 SY-4599-MP008SY-3903-06D10 SY-4599-MP020SY-3903-08D08 SY-4599-MP009SY-3903-08D10 SY-4599-MP018SY-3903-12D12 SY-4599-MP014SY-3903-16D16 SY-4599-MP019

SY-3903-03D04 SY-4599-MP001SY-3903-06D06 SY-4599-MP004SY-3903-04D05 SY-4599-MP002SY-3903-04D06 SY-4599-MP004SY-3903-06D06 SY-4599-MP005SY-3903-06D08 SY-4599-MP008SY-3903-06D10 SY-4599-MP020SY-3903-08D08 SY-4599-MP009SY-3903-08D10 SY-4599-MP018SY-3903-08D12 SY-4599-MP014SY-3903-12D12 SY-4599-MP014SY-3903-16D16 SY-4599-MP019JIC 37 MALE RIGIDSY-3903-03503 SY-4599-MP001SY-3903-03504 SY-4599-MP001SY-3903-04504 SY-4599-MP002SY-3903-04505 SY-4599-MP002SY-3903-04506 SY-4599-MP005SY-3903-05505 SY-4599-MP002SY-3903-05506 SY-4599-MP004

JIC 37 MALE RIGID PUSHER PART No. FITTINGSSY-3903-06505 SY-4599-MP005SY-3903-06506 SY-4599-MP005SY-3903-06508 SY-4599-MP007SY-3903-08508 SY-4599-MP008SY-3903-08510 SY-4599-MP008SY-3903-08512 SY-4599-MP011SY-3903-12512 SY-4599-MP011SY-3903-12514 SY-4599-MP014SY-3903-12516 SY-4599-MP013SY-3903-16516 SY-4599-MP013MALE PIPE SWIVELSY-3903-02142 SY-4599-MP027SY-3903-02144 SY-4599-MP003SY-3903-03142 SY-4599-MP027SY-3903-03144 SY-4599-MP003SY-3903-04144 SY-4599-MP003SY-3903-05144 SY-4599-MP003SY-3903-06146 SY-4599-MP006SY-3903-06148 SY-4599-FP025SY-3903-08148 SY-4599-MP010SY-3903-12152 SY-4599-MP012SY-3903-16156 SY-4599-MP016JIC 37 FEMALE SWIVELSY-3903-02543 SY-4599-FP017SY-3903-02544 SY-4599-FP010SY-3903-02545 SY-4599-FP029SY-3903-03543 SY-4599-FP017SY-3903-03544 SY-4599-FP011SY-3903-03545 SY-4599-FP001SY-3903-04544 SY-4599-FP012SY-3903-04545 SY-4599-FP013SY-3903-04545-003 SY-4599-FP012SY-3903-04546 SY-4599-FP013SY-3903-05544 SY-4599-FP012SY-3903-05545 SY-4599-FP013SY-3903-05546 SY-4599-FP013SY-3903-06544 SY-4599-FP007SY-3903-06545 SY-4599-FP013SY-3903-06546 SY-4599-FP015SY-3903-06548 SY-4599-FP005SY-3903-06550 SY-4599-FP006SY-3903-08548 SY-4599-FP016SY-3903-08550 SY-4599-FP006SY-3903-08552 SY-4599-FP008SY-3903-12550 SY-4599-FP021SY-3903-12552 SY-4599-FP008SY-3903-12554 SY-4599-FP009SY-3903-12556 SY-4599-FP009SY-3903-16556 SY-4599-FP009

SY-390H-03544 SY-4599-FP011SY-390H-03545 SY-4599-FP001SY-390H-04544 SY-4599-FP012SY-390H-04545 SY-4599-FP013SY-390H-04546 SY-4599-FP013SY-390H-05546 SY-4599-FP013

SY-390H-06544 SY-4599-FP013SY-390H-06545 SY-4599-FP017SY-390H-06546 SY-4599-FP013SY-390H-06548 SY-4599-FP015SY-390H-06550 SY-4599-FP005SY-390H-08548 SY-4599-FP006SY-390H-08550 SY-4599-FP016SY-390H-08552 SY-4599-FP006SY-390H-10550 SY-4599-FP008SY-390H-10552 SY-4599-FP021SY-390H-12550 SY-4599-FP008SY-390H-12552 SY-4599-FP021SY-390H-12554 SY-4599-FP008SY-390H-16556 SY-4599-FP009SY-390H-16556 SY-4599-FP009SAE 45 FEMALE SWIVELSY-3903-03544 SY-4599-FP011SY-3903-03545 SY-4599-FP011SY-3903-04544 SY-4599-FP012SY-3903-04545 SY-4599-FP013SY-3903-04A06 SY-4599-FP003SY-3903-05545 SY-4599-FP013SY-3903-05A06 SY-4599-FP003SY-3903-06A06 SY-4599-FP014SY-3903-06548 SY-4599-FP005SY-3903-08548 SY-4599-FP016SY-3903-08550 SY-4599-FP006SY-3903-12A12 SY-4599-FP008SY-3903-16A16 SY-4599-FP023

SY-390H-03544 SY-4599-FP011SY-390H-03545 SY-4599-FP001SY-390H-04544 SY-4599-FP012SY-390H-04545 SY-4599-FP013SY-390H-04A06 SY-4599-FP003SY-390H-06A06 SY-4599-FP014SY-390H-06548 SY-4599-FP005SY-390H-08548 SY-4599-FP016SY-390H-08550 SY-4599-FP006SY-390H-12A12 SY-4599-FP008SY-390H-16A16 SY-4599-FP023

FEMAL NPT RIGID PUSHER PART No. FITTINGSSY-3903-02202 SY-4599-FP012SY-3903-03202 SY-4599-FP026SY-3903-04204 SY-4599-FP002SY-3903-04206 SY-4599-FP004SY-3903-06204 SY-4599-FP002SY-3903-06206 SY-4599-FP004SY-3903-06208 SY-4599-FP006SY-3903-08208 SY-4599-FP007

SY-390H-03202 SY-4599-FP026SY-390H-03204 SY-4599-FP002SY-390H-04204 SY-4599-FP002SY-390H-04206 SY-4599-FP004SY-390H-06206 SY-4599-FP004SY-390H-06208 SY-4599-FP00630 DEGREE INVERTED FLARE NPSMSY-3903-02244 SY-4599-FP024SY-3903-03244 SY-4599-FP002SY-3903-04244 SY-4599-FP004SY-3903-04246 SY-4599-FP013SY-3903-05244 SY-4599-FP013SY-3903-06244 SY-4599-FP014SY-3903-06246 SY-4599-FP004SY-3903-08248 SY-4599-FP018SY-3903-12252 SY-4599-FP008SY-3903-16256 SY-4599-FP009

SY-390H-03244 SY-4599-FP002SY-390H-04244 SY-4599-FP002SY-390H-06244 SY-4599-FP013SY-390H-06246 SY-4599-FP004SY-390H-08248 SY-4599-FP018SY-390H-12252 SY-4599-FP008SY-390H-16256 SY-4599-FP009MALE PIPE SWIVEL 90 ELBOWSY-3903-04274 SY-4599-SP008SY-3903-06276 SY-4599-SP011SY-3903-08278 SY-4599-SP009SY-3903-06276 SY-4599-SP011SY-3903-08278 SY-4599-SP00945 BENT TUBE WITH 45 INV FL SWIVELSY-3903-03604 SY-4599-TP204SY-3903-04604 SY-4599-TP204SY-3903-04605 SY-4599-TP205SY-3903-04606 SY-4599-TP206SY-3903-05606 SY-4599-TP206SY-3903-06606 SY-4599-TP206SY-3903-06608 SY-4599-TP208SY-3903-08608 SY-4599-TP308SY-3903-08610 SY-4599-TP310SY-3903-12612 SY-4599-TP312SY-3903-16616 SY-4599-TP316

SY-390H-03604 SY-4599-TP204SY-390H-04604 SY-4599-TP204SY-390H-04605 SY-4599-TP205SY-390H-06606 SY-4599-TP206SY-390H-06608 SY-4599-TP208SY-390H-08608 SY-4599-TP308SY-390H-08610 SY-4599-TP310SY-390H-12612 SY-4599-TP312SY-390H-16616 SY-4599-TP31690 LONG BENT TUBE FEMALE SW JIC 37SY-3903-02843 SY-4599-TP204SY-3903-03844 SY-4599-TP204SY-3903-04844 SY-4599-TP204SY-3903-04845 SY-4599-TP205SY-3903-04846 SY-4599-TP206SY-3903-05846 SY-4599-TP206SY-3903-06846 SY-4599-TP206SY-3903-06848 SY-4599-TP208SY-3903-08848 SY-4599-TP308SY-3903-08850 SY-4599-TP310SY-3903-12852 SY-4599-TP312SY-3903-12854 SY-4599-TP314SY-3903-16856 SY-4599-TP31690 SHORT BENT TUBE F. SW JIC 37SY-3903-02643 SY-4599-TP204SY-3903-02644 SY-4599-TP038SY-3903-03644 SY-4599-TP204SY-3903-04644 SY-4599-TP204SY-3903-04645 SY-4599-TP205SY-3903-04646 SY-4599-TP206SY-3903-05645 SY-4599-TP205SY-3903-05646 SY-4599-TP206SY-3903-06644 SY-4599-TP204SY-3903-06646 SY-4599-TP206SY-3903-06648 SY-4599-TP208SY-3903-06650 SY-4599-TP310SY-3903-08648 SY-4599-TP308SY-3903-08650 SY-4599-TP310SY-3903-12650 SY-4599-TP312SY-3903-12652 SY-4599-TP312SY-3903-12654 SY-4599-TP314SY-3903-12656 SY-4599-TP314SY-3903-16652 SY-4599-TP316SY-3903-16656 SY-4599-TP316SY-390H-03644 SY-4599-TP204

90 SHORT BENT TUBE , F. SW JIC 37PUSHER

PART No. FITTINGSSY-390H-04644 SY-4599-TP204SY-390H-04645 SY-4599-TP205SY-390H-04646 SY-4599-TP206SY-390H-05646 SY-4599-TP206SY-390H-06644 SY-4599-TP204SY-390H-06646 SY-4599-TP206SY-390H-06648 SY-4599-TP208SY-390H-06650 SY-4599-TP310SY-390H-08648 SY-4599-TP308SY-390H-08650 SY-4599-TP310SY-390H-10652 SY-4599-TP312SY-390H-12650 SY-4599-TP312SY-390H-12652 SY-4599-TP312SY-390H-12654 SY-4599-TP314SY-390H-12656 SY-4599-TP316SY-390H-16652 SY-4599-TP316SY-390H-16656 SY-4599-TP316SAE FLAREDLESS MALE ENDSY-3903-04K44 SY-4599-MP-002SY-3903-06K48 SY-4599-MP-005SY-3903-06K48 SY-4599-MP-008STRAIGHT WITH F. SWIVEL O,RING FACESEALSY-3903-02404 SY-4599-MP045SY-3903-04404 SY-4599-MP045SY-3903-05404 SY-4599-MP045SY-3903-05406 SY-4599-MP037SY-3903-06406 SY4599-MP031SY-3903-06408 SY-4599-MP046SY-3903-08408 SY-4599-MP040SY-3903-12412 SY-4599-MP039SY-3903-16416 SY-4599-MP042STRAIGHT WITH F. SWIVEL O,RING FACESEALSY-390H-04404 SY-4599-MP045SY-390H-06406 SY-4599-MP031SY-390H-08408 SY-4599-MP040SY-390H-08410 SY-4599-MP059SY-390H-10410 SY-4599-MP312SY-390H-10412 SY-4599-MP039SY-390H-12412 SY-4599-MP039SY-390H-16416 SY-4599-MP042FEMALE SWIVEL 45 ELBOW ORING FACESEALSY-3903-02444 TP204*SY-3903-04444 SY-4599-TP204SY-3903-05444 SY-4599-TP204SY-3903-05446 SY-4599-TP206SY-3903-06446 SY-4599-TP206SY-3903-08448 SY-4599-TP308SY-3903-12452 SY-4599-TP312

SY-390H-04444 SY-4599-TP204SY-390H-06446 SY-4599-TP206SY-390H-08448 SY-4599-TP308SY-390H-12452 SY-4599-TP312F. SWIVEL 90 ELB O-RING FACE SEALSHORT DROPSY-3903-02474 SY-459-9-TP204*SY-3903-04474 SY-4599-TP204SY-3903-05474 SY-4599-TP204SY-3903-05476 SY-4599-TP206SY-3903-06476 SY-4599-TP206SY-3903-08478 SY-4599-TP308SY-3903-12482 SY-4599-TP312

SY-390H-04474 SY-4599-TP204SY-390H-06476 SY-4599-TP206SY-390H-08478 SY-4599-TP308SY-390H-12482 SY-4599-TP312

SY-390N-12482 SY-4599-TP312F SWIVEL 90 ELB O-RING FACE SEALLONG DROPSY-3903-04674 SY-4599-TP204SY-3903-05674 SY-4599-TP204SY-3903-05676 SY-4599-TP206SY-3903-06676 SY-4599-TP206SY-3903-08678 SY-4599-TP308SY-3903-12682 SY-4599-TP312

SY-390H-04474 SY-4599-TP204SY-390H-06476 SY-4599-TP206SY-390H-08478 SY-4599-TP308SY-390H-12482 SY-4599-TP312

SY-390N-12482 SY-4599-TP312STAND PIPE J SERIESSY-3903-04J04 SY-4599-TP204SY-3903-06J06 SY-4599-TP206SY-3903-08J08 SY-4599-TP308

22.

B

1.

2.

3.

4.

5.

6.

Steps

1. Cut hose to length.

Using a cut-off saw or cut-off wheel, cut the hose square to the

desired length.

Clean hose with air pressure to remove dust particles.

2. Mark insertion Depth.

Find the insertion depth by measuring the distance from the end of

the ferrule to the shoulder of the ferrule.

Using a ruler or by holding the hose next to the ferrule, mark a line

on the hose indicating the insertion depth.

3. Lubricate hose with hose assembly lubricant.

Place a small amount of lubricant on the outer and inner tube

portion of the hose. Only use approved hose assembly lubricant.

Other non-approved lubricants or oil products may not be

compatible with hose material.

4. Insert fitting into hose.

Push the fitting into the hose until the insertion depth mark lines up

with the end of the ferrule.

5. Insert Hose into crimping machine.

When crimping Fairview's SC600 and SCK600 Series, align the

dots on the ferrule with the top of the dies. (figure 1)

When crimping Fairview's SC500, SC900, SCAJ00, SCT900MS,

SCTGW600 and SCTBW00 Series, align the top shoulder of the

ferrule with the top of the dies and crimp the entire ferrule. (figure 2)

6. Check Crimp Diameter.

After crimping verify crimp diameter is within specifications using

calipers. Place caliper on the lower or smooth portion of the ferrule.

Do not place calipers on any raised ridges on the ferrule. Measure

the top, middle and bottom of the ferrule to ensure crimp diameter

is correct and uniform.

figure 1 figure 2

HYDRAULIC CRIMP INSTRUCTIONS

23.

Male Pipe

PART No. Hose I.D. PipeSC625-3B 3/16 1/4SC625-4A 1/4 1/8SC625-4B 1/4 1/4SC625-4C 1/4 3/8SC625-4D 1/4 1/2SC625-6B 3/8 1/4SC625-6C 3/8 3/8SC625-6D 3/8 1/2SC625-8C 1/2 3/8SC625-8D 1/2 1/2SC625-10D 5/8 1/2SC625-10E 5/8 3/4SC625-12D 3/4 1/2SC625-12E 3/4 3/4SC625-12H 3/4 1SC625-16E 1 3/4SC625-16H 1 1SC625-20J 1-1/4 1-1/4

Male Pipe(WorkingSwivel)

PART No. Hose I.D. PipeSC625SW-4B 1/4 1/4SC625SW-6B 3/8 1/4SC625SW-6C 3/8 3/8SC625SW-6D 3/8 1/2SC625SW-8D 1/2 1/2SC625SW-12E 3/4 3/4SC625SW-16H 1 1

FemalePipe

PART No. Hose I.D. PipeSC626-4A 1/4 1/8SC626-4B 1/4 1/4SC626-6B 3/8 1/4SC626-6C 3/8 3/8SC626-8D 1/2 1/2SC626-12E 3/4 3/4

S.A.E. 37°Female Flare

(Swivel)

PART No. Hose I.D. TubeSC638-34 3/16 1/4SC638-44 1/4 1/4SC638-45 1/4 5/16SC638-46 1/4 3/8SC638-64 3/8 1/4SC638-66 3/8 3/8SC638-68 3/8 1/2SC638-610 3/8 5/8SC638-86 1/2 3/8SC638-88 1/2 1/2SC638-810 1/2 5/8SC638-812 1/2 3/4SC638-108 5/8 1/2SC638-1010 5/8 5/8SC638-1012 5/8 3/4SC638-1210 3/4 5/8SC638-1212 3/4 3/4SC638-1214 3/4 7/8SC638-1216 3/4 1SC638-1612 1 3/4SC638-1616 1 1SC638-2020 1-1/4 1-1/4

S.A.E. 37°Male Flare

PART No. Hose I.D. TubeSC637-44 1/4 1/4SC637-45 1/4 5/16SC637-46 1/4 3/8SC637-66 3/8 3/8SC637-68 3/8 1/2SC637-610 3/8 5/8SC637-88 1/2 1/2SC637-810 1/2 5/8SC637-812 1/2 3/4SC637-108 5/8 1/2SC637-1010 5/8 5/8SC637-1012 5/8 3/4SC637-1210 3/4 5/8SC637-1212 3/4 3/4SC637-1214 3/4 7/8SC637-1216 3/4 1SC637-1616 1 1SC637-2020 1-1/4 1-1/4


PART No. Hose I.D. TubeSC627-66 3/8 3/8


(Swivel)

PART No. Hose I.D. TubeSC628-46 1/4 3/8SC628-66 3/8 3/8SC628-1212 3/4 3/4

S.A.E. 45°Inverted Flare

(Swivel)

PART No. Hose I.D. TubeSC635-44 1/4 1/4SC635-45 1/4 5/16SC635-65 3/8 5/16SC635-66 3/8 3/8SC635-88 1/2 1/2SC635-810 1/2 5/8

FemaleN.P.S.M. Pipe

(Swivel)

PART No. Hose I.D. PipeSC626SW-4B 1/4 1/4SC626SW-6C 3/8 3/8SC626SW-6D 3/8 1/2SC626SW-8D 1/2 1/2SC626SW-12E 3/4 3/4SC626SW-16H 1 1SC626SW-20J 1-1/4 1-1/4

MaleO-Ring Boss

PART No. Hose I.D. O-RingSC643-44 1/4 7/16 - 20SC643-45 1/4 1/2 - 20SC643-46 1/4 9/16 - 18SC643-66 3/8 9/16 - 18SC643-68 3/8 3/4 - 16SC643-610 3/8 7/8 - 14SC643-88 1/2 3/4 - 16SC643-810 1/2 7/8 - 14SC643-812 1/2 1-1/16 - 12SC643-1210 3/4 7/8 - 14SC643-1212 3/4 1-1/16 - 12SC643-1216 3/4 1-5/16 - 12SC643-1616 1 1-5/16 - 12SC643-2020 1-1/4 1-5/8 - 12

MaleO-Ring Boss

(Swivel)

PART No. Hose I.D. O-RingSC643SW-68 3/8 3/4 - 16SC643SW-88 1/2 3/4 - 16SC643SW-810 1/2 7/8 - 14

Female (Grease Tap)

PART No. Hose I.D. ThreadSC626GT-4A 1/4 1/2 - 27SC626GT-6A 3/8 1/2 - 27

Male O-RingFace Seal

PART No. Hose I.D. ORFSSC653-44 1/4 9/16 - 18SC653-66 3/8 11/16 - 16SC653-68 3/8 13/16 - 16SC653-88 1/2 13/16 - 16SC653-810 1/2 1 - 14SC653-1010 5/8 1 - 14SC653-1212 3/4 1-3/16 - 12

STEEL ONE PIECE CRIMP HOSE ENDS(COMPRESSION STYLE)

FOR USE WITH: S.A.E. 100R1-AT, 100R2-AT, T1SN, T2SN, 100R3, 100R4, 100R16 AND 100R17 HOSE(Pages 3 - 5, 9) For Crimp Specifications see page 21 and for Compatible Crimping Machines See Page 86

ITEMS SHOWN ARE INTERCHANGEABLE WITH WEATHERHEAD “U” SERIES COUPLINGS.(They are Fairview Equivalents and are NOT WeatherHead Original Product.)

B

24.

90° ELBOWMale Pipe(WorkingSwivel)

PART No. Hose I.D. PipeSC616SW-4B 1/4 1/4SC616SW-6C 3/8 3/8SC616SW-6D 3/8 1/2SC616SW-8D 1/2 1/2SC616SW-12E 3/4 3/4

HoseSplicer

PART No. Hose I.D.SC629-44 1/4SC629-66 3/8SC629-88 1/2SC629-1212 3/4SC629-1616 1

90° ELBOW Male O-Ring

Boss(WorkingSwivel)

PART No. Hose I.D. O-RingSC636-66 3/8 9/16 - 18SC636-68 3/8 3/4 - 16SC636-610 3/8 7/8 - 14SC636-88 1/2 3/4 - 16SC636-810 1/2 7/8 - 14SC636-812 1/2 1-1/16 - 12SC636-1212 3/4 1-1/16 - 12

90° ELBOWS.A.E. 37°

Female Flare(Swivel)

PART No. Hose I.D. TubeSC639-44 1/4 1/4SC639-45 1/4 5/16SC639-46 1/4 5/16SC639-65 3/8 5/16SC639-66 3/8 3/8SC639-68 3/8 1/2SC639-88 1/2 1/2SC639-810 1/2 5/8SC639-1010 5/8 5/8SC639-1012 5/8 3/4SC639-1212 3/4 3/4SC639-1616 1 1

Tube Repair(Flareless)

PART No. Hose I.D. TubeSC667-44 1/4 1/4SC667-45 1/4 5/16SC667-65 3/8 5/16SC667-66 3/8 3/8SC667-88 1/2 1/2SC667-810 1/2 5/8SC667-1212 3/4 3/4SC667-1616 1 1

KOMATSUFemale 30°

Flare (Swivel)(Metric)

PART No. Hose I.D. MetricSCK631KM-4-14 1/4 M14X1.5SCK631KM-6-18 3/8 M18X1.5SCK631KM-8-22 1/2 M22X1.5SCK631KM-10-24 5/8 M24X1.5SCK631KM-12-30 3/4 M30X1.5SCK631KM-16-33 1 M33X1.5

UniversalSeat

(Light)Female

(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSCK631LM-4-12 1/4 6MM M12X1.5SCK631LM-4-14 1/4 8MM M14X1.5SCK631LM-4-16 1/4 10MM M16X1.5SCK631LM-6-16 3/8 10MM M16X1.5SCK631LM-6-18 3/8 12MM M18X1.5SCK631LM-8-22 1/2 15MM M22X1.5SCK631LM-10-26 5/8 18MM M26X1.5SCK631LM-12-30 3/4 22MM M30X2SCK631LM-16-36 1 28MM M36X2

BritishStandard

Pipe ParallelFemale (Swivel)

(BSPP)

PART No. Hose I.D. PipeSCK631BSP-44 1/4 1/4 - 19SCK631BSP-46 1/4 3/8 - 19SCK631BSP-66 3/8 3/8 - 19SCK631BSP-88 1/2 1/2 - 14SCK631BSP-1010 5/8 5/8 - 14SCK631BSP-1212 3/4 3/4 - 14SCK631BSP-1616 1 1 - 11

Female 30°JIS Flare

Parallel Pipe(Swivel)

PART No. Hose I.D. PipeSCK631JIS-44 1/4 1/4 - 19SCK631JIS-66 3/8 3/8 - 19SCK631JIS-88 1/2 1/2 - 14SCK631JIS-1212 3/4 3/4 - 14

BritishStandard

Pipe TaperedMale

(BSPT)PART No. Hose I.D. PipeSCK625BSP-4B 1/4 1/4 - 19SCK625BSP-6C 3/8 3/8 - 19SCK625BSP-8D 1/2 1/2 - 14SCK625BSP-12E 3/4 3/4 - 14

BritishStandard

Pipe ParallelMale

(BSPP)PART No. Hose I.D. PipeSCK643BSP-44 1/4 1/4 - 19SCK643BSP-66 3/8 3/8 - 19SCK643BSP-68 3/8 1/2 - 14SCK643BSP-86 1/2 3/8 - 19SCK643BSP-88 1/2 1/2 - 14SCK643BSP-1212 3/4 3/4 - 14

Universal24° Seat

(Heavy) Female(Swivel)

Includes O-Ring(DIN)

PART No. Hose I.D. Tube MetricSCK631HM-4-16 1/4 8MM M16X1.5SCK631HM-4-18 1/4 10MM M18X1.5SCK631HM-6-18 3/8 10MM M18X1.5SCK631HM-6-20 3/8 12MM M20X1.5SCK631HM-6-22 3/8 14MM M22X1.5SCK631HM-8-24 1/2 16MM M24X1.5SCK631HM-10-30 5/8 20MM M30X2SCK631HM-12-36 3/4 25MM M36X2SCK631HM-16-42 1 30MM M42X2

Female O-RingFace Seal(Swivel)

PART No. Hose I.D. ORFSSC658-44 1/4 9/16 - 18SC658-46 1/4 11/16 - 16SC658-66 3/8 11/16 - 16SC658-68 3/8 13/16 - 16SC658-88 1/2 13/16 - 16SC658-810 1/2 1 - 14SC658-1010 5/8 1 - 14SC658-1012 5/8 1-3/16 - 12SC658-1212 3/4 1-3/16 - 12SC658-1616 1 1-7/16 - 12


FOR USE WITH: S.A.E. 100R1-AT, 100R2-AT, T1SN, T2SN, 100R3, 100R4, 100R16 AND 100R17 HOSE(Pages 3 - 5, 9) For Compatible Crimping Machines See Page 86


B

25.



PART No. Hose I.D. TubeSC640-44 1/4 1/4SC640-45 1/4 5/16SC640-65 3/8 5/16SC640-66 3/8 3/8SC640-68 3/8 1/2SC640-88 1/2 1/2SC640-810 1/2 5/8SC640-1010 5/8 5/8SC640-1012 5/8 3/4SC640-1212 3/4 3/4SC640-1616 1 1

45° ELBOWFemale O-Ring

Face Seal(Swivel)





90° ELBOWS.A.E. 45°Inverted

Flare(Swivel)


90° ELBOW(LONG STYLE)


(Swivel)

PART No. Hose I.D. TubeSC639L-44 1/4 1/4SC639L-66 3/8 3/8SC639L-88 1/2 1/2SC639L-810 1/2 5/8SC639L-1212 3/4 3/4SC639L-1616 1 1


Face Seal(Swivel)

PART No. HOSE ORFSSC659-44 1/4 9/16 - 18SC659-46 1/4 11/16 - 16SC659-66 3/8 11/16 - 16SC659-68 3/8 13/16 - 16SC659-88 1/2 13/16 - 16SC659-810 1/2 1 - 14SC659-1010 5/8 1 - 14SC659-1012 5/8 1-3/16 - 12SC659-1212 3/4 1-3/16 - 12SC659-1616 1 1-7/16 - 12

90° ELBOW(LONG STYLE)Female O-Ring

Face Seal(Swivel)

PART No. Hose I.D. ORFSSC659L-44 1/4 9/16 - 18SC659L-46 1/4 11/16 - 16SC659L-66 3/8 11/16 - 16SC659L-68 3/8 13/16 - 16SC659L-88 1/2 13/16 - 16SC659L-1010 5/8 1 - 14SC659L-1212 3/4 1-3/16 - 12


Flare(Swivel)





90° ELBOWUniversal

24° Seat (Heavy)Female (Swivel)


PART No. Hose I.D. Tube MetricSCK639HM-4-16 1/4 8MM M16X1.5SCK639HM-4-18 1/4 10MM M18X1.5SCK639HM-6-18 3/8 10MM M18X1.5SCK639HM-6-20 3/8 12MM M20X1.5SCK639HM-6-22 3/8 14MM M22X1.5SCK639HM-8-24 1/2 16MM M24X1.5SCK639HM-10-30 5/8 20MM M30X2SCK639HM-12-36 3/4 25MM M36X2SCK639HM-16-42 1 30MM M42X2

90° ELBOWUniversal

Seat (Light)Female

(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSCK639LM-4-16 1/4 10MM M16X1.5SCK639LM-6-18 3/8 12MM M18X1.5SCK639LM-8-22 1/2 15MM M22X1.5SCK639LM-10-26 5/8 18MM M26X1.5SCK639LM-12-30 3/4 22MM M30X2SCK639LM-16-36 1 28MM M36X2

90° ELBOWBritish Standard

Parallel PipeFemale (Swivel)

(BSPP)

PART No. Hose I.D. BSPPSCK639BSP-44 1/4 1/4 - 19SCK639BSP-66 3/8 3/8 - 19SCK639BSP-88 1/2 1/2 - 14SCK639BSP-1212 3/4 3/4 - 14

FOR USE WITH: S.A.E. 100R1-AT, 100R2-AT, T1SN, T2SN, 100R3, 100R4, 100R16 AND 100R17 HOSE(Pages 3 - 5, 9) For Compatible Crimping Machines See Page 86



B

26.

Male Pipe

PART No. Hose I.D. PipeSC925-4A 1/4 1/8SC925-4B 1/4 1/4SC925-4C 1/4 3/8SC925-4D 1/4 1/2SC925-6B 3/8 1/4SC925-6C 3/8 3/8SC925-6D 3/8 1/2SC925-8C 1/2 3/8SC925-8D 1/2 1/2SC925-8E 1/2 3/4SC925-10D 5/8 1/2SC925-10E 5/8 3/4SC925-12D 3/4 1/2SC925-12E 3/4 3/4SC925-12H 3/4 1SC925-16E 1 3/4SC925-16H 1 1SC925-20J 1-1/4 1-1/4


PART No. Hose I.D. PipeSC925SW-4B 1/4 1/4SC925SW-6B 3/8 1/4SC925SW-6C 3/8 3/8SC925SW-6D 3/8 1/2SC925SW-8D 1/2 1/2SC925SW-12E 3/4 3/4SC925SW-16H 1 1

FemalePipe

PART No. Hose I.D. PipeSC926-4B 1/4 1/4SC926-6B 3/8 1/4SC926-6C 3/8 3/8SC926-8D 1/2 1/2

Female(Grease Tap)

PART No. Hose I.D. ThreadSC926GT-4A 1/4 1/2 - 27SC926GT-6A 3/8 1/2 - 27


(Swivel)

PART No. Hose I.D. TubeSC938-44 1/4 1/4SC938-45 1/4 5/16SC938-46 1/4 3/8SC938-64 3/8 1/4SC938-66 3/8 3/8SC938-68 3/8 1/2SC938-610 3/8 5/8SC938-86 1/2 3/8SC938-88 1/2 1/2SC938-810 1/2 5/8SC938-812 1/2 3/4SC938-108 5/8 1/2SC938-1010 5/8 5/8SC938-1012 5/8 3/4SC938-1210 3/4 5/8SC938-1212 3/4 3/4SC938-1214 3/4 7/8SC938-1216 3/4 1SC938-1612 1 3/4SC938-1616 1 1SC938-2020 1-1/4 1-1/4


PART No. Hose I.D. TubeSC937-44 1/4 1/4SC937-45 1/4 5/16SC937-46 1/4 3/8SC937-66 3/8 3/8SC937-68 3/8 1/2SC937-610 3/8 5/8SC937-88 1/2 1/2SC937-810 1/2 5/8SC937-812 1/2 3/4SC937-108 5/8 1/2SC937-1010 5/8 5/8SC937-1012 5/8 3/4SC937-1210 3/4 5/8SC937-1212 3/4 3/4SC937-1214 3/4 7/8SC937-1216 3/4 1SC937-1616 1 1SC937-2020 1-1/4 1-1/4



S.A.E. 45°Inverted Flare

(Swivel)

PART No. Hose I.D. TubeSC935-44 1/4 1/4SC935-45 1/4 5/16SC935-65 3/8 5/16SC935-66 3/8 3/8SC935-88 1/2 1/2

MaleO-Ring Boss

PART No. Hose I.D. O-RingSC943-44 1/4 7/16 - 18SC943-45 1/4 1/2 - 20SC943-46 1/4 9/16 - 18 SC943-66 3/8 9/16 - 18SC943-68 3/8 3/4 - 16SC943-88 1/2 3/4 - 16SC943-810 1/2 7/8 - 14SC943-1212 3/4 1-1/16 - 12SC943-1616 1 1-5/16 - 12

FemaleNPSM Pipe

(Swivel)

PART No. Hose I.D. PipeSC926SW-4B 1/4 1/4SC926SW-6C 3/8 3/8SC926SW-6D 3/8 1/2SC926SW-8D 1/2 1/2SC926SW-12E 3/4 3/4SC926SW-16H 1 1SC926SW-20J 1-1/4 1-1/4


(Swivel)

PART No. Hose I.D. TubeSC928-46 1/4 3/8SC928-66 3/8 3/8SC928-1212 3/4 3/4

MaleO-Ring Face

Seal

PART No. Hose I.D. ORFSSC953-44 1/4 9/16 - 18SC953-66 3/8 11/16 - 16SC953-68 3/8 13/16 - 16SC953-88 1/2 13/16 - 16SC953-810 1/2 1 - 14SC953-1010 5/8 1 - 14SC953-1212 3/4 1-3/16 - 12

MaleO-Ring Boss

(Working Swivel)

PART No. Hose I.D. O-RingSC943SW-44 1/4 7/16 - 18SC943SW-66 3/8 9/16 - 18SC943SW-68 3/8 3/4 - 16SC943SW-88 1/2 3/4 - 16SC943SW-810 1/2 7/8 - 14

FemaleO-Ring Face

Seal(Swivel)


STEEL ONE PIECE CRIMP HOSE ENDS(BITE-TO-THE-WIRE)

FOR USE WITH S.A.E. 100R1-AT, 100R2-AT, T1SN, T2SN, 100R16 AND 100R17 HOSE(Pages 3 - 4, 9) For Crimp Specifications See Page 21.

ITEMS SHOWN ARE INTERCHANGEABLE WITH PARKER “43” SERIES COUPLINGS.(They are Fairview Equivalents and are NOT PARKER Original Product.)

B

27.

BritishStandard

Pipe TaperedMale

(BSPT)PART No. Hose I.D. PipeSC925BSP-4B 1/4 1/4 - 19SC925BSP-6C 3/8 3/8 - 19SC925BSP-8D 1/2 1/2 - 14SC925BSP-12E 3/4 3/4 - 14

BritishStandard

Pipe ParallelMale

(BSPP)PART No. Hose I.D. PipeSC943BSP-44 1/4 1/4 - 19SC943BSP-66 3/8 3/8 - 19SC943BSP-88 1/2 1/2 - 14SC943BSP-1212 3/4 3/4 - 14

BritishStandard


(BSPP)

PART No. Hose I.D. PipeSC931BSP-44 1/4 1/4 - 19SC931BSP-66 3/8 3/8 - 19SC931BSP-88 1/2 1/2 - 14SC931BSP-1010 5/8 5/8 - 14

Female 30°JIS Flare

Parallel PipeFemale(Swivel)

PART No. Hose I.D. PipeSC931JIS-44 1/4 1/4 SC931JIS-66 3/8 3/8SC931JIS-88 1/2 1/2SC931JIS-1212 5/8 5/8

KOMATSUFemale 30°


PART No. Hose I.D. MetricSC931KM-4-14 1/4 M14X1.5 SC931KM-6-18 3/8 M18X1.5SC931KM-8-22 1/2 M22X1.5SC931KM-10-24 5/8 M24X1.5SC931KM-12-30 3/4 M30X1.5SC931KM-16-33 1 M33X1.5

UniversalSeat

(Light) Male(DIN)

PART No. Hose I.D. Tube MetricSC943LM-4-14 1/4 8 MM M14X1.5 SC943LM-6-16 3/8 10 MM M16X1.5 SC943LM-6-18 3/8 12 MM M18X1.5 SC943LM-8-22 1/2 15 MM M22X1.5

Universal24° Seat

(Heavy) FemaleIncludes O-Ring(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSC931HM-4-16 1/4 8 MM M16X1.5SC931HM-4-18 1/4 10 MM M18X1.5SC931HM-6-20 3/8 12 MM M20X1.5SC931HM-6-22 3/8 14 MM M22X1.5SC931HM-8-24 1/2 16 MM M24X1.5SC931HM-12-36 3/4 25 MM M36X2.0SC931HM-16-42 1 30 MM M42X2.0

Universal24° Seat

(Heavy) Male(DIN)

PART No. Hose I.D. Tube MetricSC943HM-4-16 1/4 8 MM M16X1.5 SC943HM-4-18 1/4 10 MM M18X1.5 SC943HM-6-20 3/8 12 MM M20X1.5 SC943HM-6-22 3/8 14 MM M22X1.5 SC943HM-8-24 1/2 16 MM M24X1.5

UniversalSeat

(Light) Female(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSC931LM-4-12 1/4 6 MM M12X1.5 SC931LM-4-14 1/4 8 MM M14X1.5SC931LM-6-16 3/8 10 MM M16X1.5SC931LM-6-18 3/8 12 MM M18X1.5SC931LM-8-22 1/2 15 MM M22X1.5SC931LM-10-26 5/8 18 MM M26X1.5

TubeRepair

(Flareless)

PART No. Hose I.D. TubeSC967-44 1/4 1/4SC967-45 1/4 5/16SC967-65 3/8 5/16SC967-66 3/8 3/8SC967-88 1/2 1/2SC967-810 1/2 5/8SC967-1212 3/4 3/4SC967-1616 1 1

HoseSplicer

PART No. Hose I.D.SC929-44 1/4SC929-66 3/8SC929-88 1/2SC929-1212 3/4SC929-1616 1

90° ELBOW Male O-Ring

Boss(WorkingSwivel)

PART No. Hose I.D. O-RingSC936-66 3/8 9/16 - 18SC936-68 3/8 3/4 - 16SC936-88 1/2 3/4 - 16SC936-810 1/2 7/8 - 14


PART No. Hose I.D. PipeSC916SW-4B 1/4 1/4SC916SW-6C 3/8 3/8SC916SW-6D 3/8 1/2SC916SW-8D 1/2 1/2



PART No. Hose I.D. TubeSC939-44 1/4 1/4SC939-45 1/4 5/16SC939-46 1/4 3/8SC939-65 3/8 5/16SC939-66 3/8 3/8SC939-68 3/8 1/2SC939-88 1/2 1/2SC939-810 1/2 5/8SC939-1010 5/8 5/8SC939-1012 5/8 3/4SC939-1212 3/4 3/4SC939-1616 1 1




B

28.


Flare(Swivel)



Face Seal(Swivel)

PART No. HOSE ORFSSC959-44 1/4 9/16 - 18SC959-46 1/4 11/16 - 16SC959-66 3/8 11/16 - 16SC959-68 3/8 13/16 - 16SC959-88 1/2 13/16 - 16SC959-810 1/2 1 - 14SC959-1010 5/8 1 - 14SC959-1012 5/8 1-3/16 - 12SC959-1212 3/4 1-3/16 - 12SC959-1616 1 1-7/16 - 1 2



PART No. Hose I.D. TubeSC940-44 1/4 1/4SC940-45 1/4 5/16SC940-65 3/8 5/16SC940-66 3/8 3/8SC940-68 3/8 1/2SC940-88 1/2 1/2SC940-810 1/2 5/8SC940-1010 5/8 5/8SC940-1012 5/8 3/4SC940-1212 3/4 3/4SC940-1616 1 1


Flare(Swivel)



Face Seal(Swivel)

PART No. Hose I.D. ORFSSC959L-44 1/4 9/16 - 18SC959L-46 1/4 11/16 - 16SC959L-66 3/8 11/16 - 16SC959L-68 3/8 13/16 - 16SC959L-88 1/2 13/16 - 16SC959L-1010 5/8 1 - 14SC959L-1212 3/4 1-3/16 - 12





Face Seal(Swivel)








90° ELBOWUniversal Seat(Light) Female(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSC939LM-4-14 1/4 8 MM M14X1.5SC939LM-6-18 3/8 12 MM M18X1.5SC939LM-8-22 1/2 15 MM M22X1.5SC939LM-10-26 5/8 20 MM M26X1.5SC939LM-12-30 3/4 25MM M30X2.0SC939LM-16-36 1 30 MM M36X2.0

90° ELBOWUniversal

24° Seat (Heavy)Female (Swivel)


PART No. Hose I.D. Tube MetricSC939HM-4-16 1/4 8 MM M16X1.5SC939HM-6-22 3/8 14 MM M22X1.5SC939HM-8-24 1/2 16 MM M24X1.5SC939HM-10-30 5/8 20 MM M30X2.0SC939HM-12-36 3/4 25 MM M36X2.0SC939HM-16-42 1 30 MM M42X2.0



(Swivel)PART No. Hose I.D. TubeSC939L-44 1/4 1/4SC939L-66 3/8 3/8SC939L-88 1/2 1/2SC939L-810 1/2 5/8SC939L-1212 3/4 3/4SC939L-1616 1 1




45° ELBOWUniversal

Seat (Light)Female (Swivel)

(DIN)

PART No. Hose I.D. Tube MetricSC940LM-6-16 3/8 10 MM M16X1.5SC940LM-6-18 3/8 12 MM M18X1.5SC940LM-8-22 1/2 15 MM M22X1.5

45° ELBOWUniversal 24° Seat

(Heavy) Female(Swivel)


PART No. Hose I.D. Tube MetricSC940HM-4-18 1/4 10 MM M18X1.5SC940HM-6-20 3/8 12 MM M20X1.5SC940HM-6-22 3/8 14 MM M22X1.5SC940HM-8-24 1/2 16 MM M24X1.5




B

29.

Male Pipe

PART No. Hose I.D. PipeSCT925MS-6C 3/8 3/8SCT925MS-8D 1/2 1/2SCT925MS-8E 1/2 3/4SCT925MS-12E 3/4 3/4SCT925MS-16H 1 1SCT925MS-20J 1-1/4 1-1/4SCT925MS-24K 1-1/2 1-1/2


PART No. Hose I.D. TubeSCT937MS-66 3/8 3/8SCT937MS-88 1/2 1/2SCT937MS-810 1/2 5/8SCT937MS-1212 3/4 3/4SCT937MS-1216 3/4 1SCT937MS-1616 1 1SCT937MS-2020 1-1/4 1-1/4SCT937MS-2424 1-1/2 1-1/2



PART No. Hose I.D. TubeSCT939MS-66 3/8 3/8SCT939MS-88 1/2 1/2SCT939MS-810 1/2 5/8SCT939MS-1212 3/4 3/4SCT939MS-1216 3/4 1SCT939MS-1616 1 1SCT939MS-1620 1 1-1/4SCT939MS-2020 1-1/4 1-1/4

MaleO-Ring Boss

PART No. Hose I.D. O-RingSCT943MS-1212 1 1-1/16 - 12SCT943MS-1616 1 1-5/16 - 12


(Swivel)

PART No. Hose I.D. TubeSCT938MS-88 1/2 1/2SCT938MS-810 1/2 5/8SCT938MS-1212 3/4 3/4SCT938MS-1216 3/4 1SCT938MS-1616 1 1SCT938MS-2020 1-1/4 1-1/4SCT938MS-2424 1-1/2 1-1/2



PART No. Hose I.D. TubeSCT940MS-88 1/2 1/2SCT940MS-810 1/2 5/8SCT940MS-1212 3/4 3/4SCT940MS-1216 3/4 1SCT940MS-1616 1 1SCT940MS-1620 1 1-1/4SCT940MS-2020 1-1/4 1-1/4


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCT950MS-88 1/2 13/16 - 16SCT950MS-1212 3/4 1-3/16 - 12SCT950MS-1216 3/4 1-7/16 - 12SCT950MS-1616 1 1-7/16 - 12SCT950MS-2020 1-1/4 1-11/16 - 12

45° ELBOWSplit Flange

Code 61

PART No. Hose I.D. FlangeSCT945MS-812 1/2 3/4SCT945MS-1212 3/4 3/4SCT945MS-1216 3/4 1SCT945MS-1616 1 1SCT945MS-1620 1 1-1/4SCT945MS-2020 1-1/4 1-1/4


Code 62

PART No. Hose I.D. FlangeSCT945MS62-88 1/2 1/2SCT945MS62-1212 3/4 3/4SCT945MS62-1616 1 1SCT945MS62-2020 1-1/4 1-1/4


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCT959MS-66 3/8 11/16 - 16SCT959MS-88 1/2 13/16 - 16SCT959MS-810 1/2 1 - 14SCT959MS-1212 3/4 1-3/16 - 12SCT959MS-1216 3/4 1-7/16 - 12SCT959MS-1616 1 1-7/16 - 12SCT959MS-1620 1 1-11/16 - 12SCT959MS-2020 1-1/4 1-11/16 - 12


Code 61

PART No. Hose I.D. FlangeSCT990MS-88 1/2 1/2SCT990MS-812 1/2 3/4SCT990MS-1212 3/4 3/4SCT990MS-1216 3/4 1SCT990MS-1616 1 1SCT990MS-1620 1 1-1/4SCT990MS-2020 1-1/4 1-1/4


PART No. Hose I.D. ORFSSCT958MS-66 3/8 11/16 - 16SCT958MS-88 1/2 13/16 - 16SCT958MS-810 1/2 1 - 14SCT958MS-1212 3/4 1-3/16 - 12SCT958MS-1216 3/4 1-7/16 - 12SCT958MS-1616 1 1-7/16 - 12SCT958MS-1620 1 1-11/16 - 12SCT958MS-2020 1-1/4 1-11/16 - 12

Split FlangeCode 61

PART No. Hose I.D. FlangeSCT900MS-88 1/2 1/2SCT900MS-812 1/2 3/4SCT900MS-1212 3/4 3/4SCT900MS-1216 3/4 1SCT900MS-1616 1 1SCT900MS-1620 1 1-1/4SCT900MS-2020 1-1/4 1-1/4

SplitFlange

Code 62

PART No. Hose I.D. FlangeSCT900MS62-1212 3/4 3/4SCT900MS62-1216 3/4 3/4SCT900MS62-1616 1 1SCT900MS62-1620 1 1-1/4SCT900MS62-2020 1-1/4 1-1/4


PART No. Hose I.D. ORFSSCT953MS-88 1/2 13/16 - 16SCT953MS-1212 3/4 1-3/16 - 12SCT953MS-1616 1 1-7/16 - 12

STEEL ONE PIECE CRIMP MULTI-SPIRAL HOSE ENDS(NON-SKIVE / BITE-TO-THE-WIRE)FOR USE WITH S.A.E. 100R12 HOSE (Page 7)

For Crimp Specifications See Page 21.ITEMS SHOWN ARE INTERCHANGEABLE WITH PARKER “71” SERIES COUPLINGS.

(They are Fairview Equivalents and are NOT PARKER Original Product.)

B

30.

Male Pipe

PART No. Hose I.D. PipeSCAJ25MS-8D 1/2 1/2SCAJ25MS-12E 3/4 3/4SCAJ25MS-16H 1 1SCAJ25MS-20J 1-1/4 1-1/4SCAJ25MS-24K 1-1/2 1-1/2SCAJ25MS-32M 2 2


PART No. Hose I.D. TubeSCAJ37MS-88 1/2 1/2SCAJ37MS-1212 3/4 3/4SCAJ37MS-1616 1 1SCAJ37MS-2020 1-1/4 1-1/4SCAJ37MS-2424 1-1/2 1-1/2SCAJ37MS-3232 2 2





(Swivel)






Face Seal(Swivel)

PART No. Hose I.D. ORFSSCAJ50MS-88 1/2 13/16 - 16SCAJ50MS-1212 3/4 1-3/16 - 12SCAJ50MS-1616 1 1-7/16 - 12SCAJ50MS-2020 1-1/4 1-11/16 - 12SCAJ50MS-2424 1-1/2 2 - 12


Code 61

PART No. Hose I.D. FlangeSCAJ45MS-88 1/2 1/2SCAJ45MS-1212 3/4 3/4SCAJ45MS-1616 1 1SCAJ45MS-2020 1-1/4 1-1/4SCAJ45MS-2424 1-1/2 1-1/2SCAJ45MS-3232 2 2


Face Seal(Swivel)



Code 61


Split FlangeCode 61


FOR USE WITH: DIN 20023 4SH, S.A.E. 100R13 HOSE (Pages 7 - 8) (SKIVE)



British StandardPipe Tapered

Male(BSPT)

PART No. Hose I.D. ThreadSCT925BSPMS-6C 3/8 3/8 - 19SCT925BSPMS-8D 1/2 1/2 - 14SCT925BSPMS-12E 3/4 3/4 - 14SCT925BSPMS-16H 1 1 - 11

British StandardPipe Parallel

Female60° Cone(Swivel)

PART No. Hose I.D. ThreadSCT931BSPMS-66 3/8 3/8 - 19SCT931BSPMS-88 1/2 1/2 - 14SCT931BSPMS-1212 3/4 3/4 - 14SCT931BSPMS-1616 1 1 - 11SCT931BSPMS-2020 1-1/4 1-1/4 - 11


Code 62

PART No. Hose I.D. FlangeSCT990MS62-1212 3/4 3/4SCT990MS62-1216 3/4 1SCT990MS62-1616 1 1SCT990MS62-1620 1 1-1/4SCT990MS62-2020 1-1/4 1-1/4

STEEL ONE PIECE CRIMP MULTI-SPIRAL HOSE ENDS(NON-SKIVE / BITE-TO-THE-WIRE)

FOR USE WITH S.A.E. 100R12 HOSE (Page 7)For Crimp Specifications See Page 21.


B

31.

Male Pipe

PART No. Hose I.D. PipeSCTGW625-8D 1/2 1/2SCTGW625-8E 1/2 3/4SCTGW625-12E 3/4 3/4SCTGW625-12H 3/4 1SCTGW625-16E 1 3/4SCTGW625-16H 1 1SCTGW625-20J 1-1/4 1-1/4SCTGW625-24K 1-1/2 1-1/2SCTGW625-32M 2 2


(Swivel)

PART No. Hose I.D. TubeSCTGW638-86 1/2 3/8SCTGW638-88 1/2 1/2SCTGW638-810 1/2 5/8SCTGW638-812 1/2 3/4SCTGW638-1212 3/4 3/4SCTGW638-1214 3/4 7/8SCTGW638-1216 3/4 1SCTGW638-1612 1 3/4SCTGW638-1616 1 1SCTGW638-2020 1-1/4 1-1/4SCTGW638-2424 1-1/2 1-1/2SCTGW638-3232 2 2


PART No. Hose I.D. TubeSCTGW637-88 1/2 1/2SCTGW637-810 1/2 5/8SCTGW637-1212 3/4 3/4SCTGW637-1214 3/4 7/8SCTGW637-1216 3/4 1SCTGW637-1616 1 1SCTGW637-2020 1-1/4 1-1/4

MaleO-Ring Boss

PART No. Hose I.D. O-RingSCTGW643-1616 1 1-5/16 - 12

MaleO-Ring Face

Seal

PART No. Hose I.D. ORFSSCTGW653-88 1/2 13/16 - 16SCTGW653-1212 3/4 1-3/16 - 12

BritishStandard


(BSPP)

PART No. Hose I.D. PipeSCTGW631BSP-88 1/2 1/2 - 14SCTGW631BSP-1212 3/4 3/4 - 14SCTGW631BSP-1616 1 1 - 11

KOMATSUFemale 30°


PART No. Hose I.D. MetricSCTGW631KM-8-22 1/2 M22X1.5SCTGW631KM-12-30 3/4 M30X1.5SCTGW631KM-16-33 1 M33X1.5

Universal24° Seat

(Heavy) FemaleIncludes O-Ring(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSCTGW631HM-8-24 1/2 16 MM M24X1.5SCTGW631HM-12-36 3/4 25 MM M36X2.0SCTGW631HM-16-42 1 30 MM M42X2.0

UniversalSeat

(Light) Female(Swivel) (DIN)

PART No. Hose I.D. Tube MetricSCTGW631LM-8-22 1/2 15 MM M22X1.5SCTGW631LM-12-30 3/4 22 MM M30X1.5SCTGW631LM-16-36 1 28 MM M36X2.0

FemaleO-Ring Face

Seal(Swivel)

PART No. Hose I.D. ORFSSCTGW658-88 1/2 13/16 - 16SCTGW658-810 1/2 1 - 14SCTGW658-1212 3/4 1-3/16 - 12SCTGW658-1616 1 1-7/16 - 12SCTGW658-2020 1-1/4 1-11/16 - 12

Split FlangeCode 61

PART No. Hose I.D. FlangeSCTGW600-88 1/2 1/2SCTGW600-1212 3/4 3/4SCTGW600-1216 3/4 1SCTGW600-1616 1 1SCTGW600-1620 1 1-1/4SCTGW600-2020 1-1/4 1-1/4SCTGW600-2424 1-1/2 1-1/2SCTGW600-3232 2 2

Split FlangeCode 62

PART No. Hose I.D. FlangeSCTGW60062-1212 3/4 3/4SCTGW60062-1216 3/4 1SCTGW60062-1616 1 1SCTGW60062-1620 1 1-1/4SCTGW60062-2020 1-1/4 1-1/4


Code 61

PART No. Hose I.D. FlangeSCTGW675-1212 3/4 3/4


Code 61

PART No. Hose I.D. FlangeSCTGW670-1212 3/4 3/4SCTGW670-1216 3/4 1


Code 61

PART No. Hose I.D. FlangeSCTGW671-1616 1 1SCTGW671-2020 1-1/4 1-1/4

BritishStandard

Pipe ParallelMale

(BSPP)PART No. Hose I.D. PipeSCTGW643BSP-1212 3/4 3/4 - 14


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCTGW659-88 1/2 13/16 - 16SCTGW659-810 1/2 1 - 14SCTGW659-1212 3/4 1-3/16 - 12SCTGW659-1616 1 1-7/16 - 1 2SCTGW659-2020 1-1/4 1-11/16 - 1 2


FOR USE WITH S.A.E. S.A.E. 100R2 AND 100R12 HOSE (Pages 3 - 4, 7)For Crimp Specifications See Page 21.

ITEMS SHOWN ARE INTERCHANGEABLE WITH WEATHERHEAD “430U” SERIES COUPLINGS.(They are Fairview Equivalents and are NOT WeatherHead Original Product.)

B

32.



PART No. Hose I.D. TubeSCTGW639-88 1/2 1/2SCTGW639-810 1/2 5/8SCTGW639-1212 3/4 3/4SCTGW639-1616 1 1SCTGW639-2020 1-1/4 1-1/4


Code 61



Split FlangeCode 61

PART No. Hose I.D. FlangeSCTGW690L-1212 3/4 3/4SCTGW690L-1216 3/4 1SCTGW690L-1616 1 1SCTGW690L-2020 1-1/4 1-1/4


Code 62



Code 61



Code 62


22-1/2° ELBOWSplit Flange

Code 61



Code 61

PART No. Hose I.D. FlangeSCTGW630-1212 3/4 3/4SCTGW630-1616 1 1SCTGW630-2020 1-1/4 1-1/4


Code 61



Code 61




PART No. Hose I.D. TubeSCTGW640-88 1/2 1/2SCTGW640-810 1/2 5/8SCTGW640-1212 3/4 3/4SCTGW640-1616 1 1


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCTGW650-88 1/2 13/16 - 16SCTGW650-810 1/2 1 - 14SCTGW650-1212 3/4 1-3/16 - 12SCTGW650-1616 1 1-7/16 - 12SCTGW650-2020 1-1/4 1-11/16 - 12



(BSPP)PART No. Hose I.D. PipeSCTGW640BSP-1212 3/4 3/4 - 14


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCTGW659L-88 1/2 13/16 - 16SCTGW659L-810 1/2 1 - 14SCTGW659L-1212 3/4 1-3/16 - 12SCTGW659L-1616 1 1-7/16 - 1 2



ITEMS SHOWN ARE INTERCHANGEABLE WITH WEATHERHEAD “430U” SERIES COUPLINGS.(They are Fairview Equivalents and are NOT WeatherHead Original Product.)

B

33.

Male Pipe

PART No. Hose I.D. PipeSCTBW25-6C 3/8 3/8SCTBW25-8D 1/2 1/2SCTBW25-12E 3/4 3/4SCTBW25-12H 3/4 1SCTBW25-16H 1 1SCTBW25-16J 1 1-1/4SCTBW25-20J 1-1/4 1-1/4SCTBW25-20K 1-1/4 1-1/2SCTBW25-24K 1-1/2 1-1/2SCTBW25-32M 2 2


(Swivel)PART No. Hose I.D. TubeSCTBW38-66 3/8 3/8SCTBW38-88 1/2 1/2SCTBW38-1212 3/4 3/4SCTBW38-1216 3/4 1SCTBW38-1616 1 1SCTBW38-1620 1 1-1/4SCTBW38-2020 1-1/4 1-1/4SCTBW38-2024 1-1/4 1-1/2SCTBW38-2424 1-1/2 1-1/2SCTBW38-3232 2 2


PART No. Hose I.D. TubeSCTBW37-66 3/8 3/8SCTBW37-88 1/2 1/2SCTBW37-1212 3/4 3/4SCTBW37-1216 3/4 1SCTBW37-1616 1 1SCTBW37-1620 1 1-1/4SCTBW37-2020 1-1/4 1-1/4SCTBW37-2024 1-1/4 1-1/2SCTBW37-2424 1-1/2 1-1/2SCTBW37-3232 2 2

FemaleO-Ring Face Seal

(Swivel)PART No. Hose I.D. ORFSSCTBW58-66 3/8 11/16 - 16SCTBW58-88 1/2 13/16 - 16SCTBW58-1212 3/4 1-3/16 - 12SCTBW58-1216 3/4 1-7/16 - 12SCTBW58-1616 1 1-7/16 - 12SCTBW58-1620 1 1-11/16 - 12SCTBW58-2020 1-1/4 1-11/16 - 12SCTBW58-2024 1-1/4 2 - 12SCTBW58-2424 1-1/2 2 - 12

Split FlangeCode 61

PART No. Hose I.D. FlangeSCTBW00-1212 3/4 3/4SCTBW00-1216 3/4 1SCTBW00-1616 1 1SCTBW00-1620 1 1-1/4SCTBW00-2020 1-1/4 1-1/4SCTBW00-2024 1-1/4 1-1/2SCTBW00-2424 1-1/2 1-1/2SCTBW00-3232 2 2


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCTBW59-66 3/8 11/16 - 16SCTBW59-88 1/2 13/16 - 16SCTBW59-1212 3/4 1-3/16 - 12SCTBW59-1216 3/4 1-7/16 - 12SCTBW59-1616 1 1-7/16 - 12SCTBW59-1620 1 1-11/16 - 12SCTBW59-2020 1-1/4 1-11/16 - 12SCTBW59-2024 1-1/4 2 - 12SCTBW59-2424 1-1/2 2 - 12SCTBW59-3232 2 2



PART No. Hose I.D. TubeSCTBW39-66 3/8 3/8SCTBW39-88 1/2 1/2SCTBW39-1212 3/4 3/4SCTBW39-1216 3/4 1SCTBW39-1616 1 1SCTBW39-1620 1 1-1/4SCTBW39-2020 1-1/4 1-1/4SCTBW39-2024 1-1/4 1-1/2SCTBW39-2424 1-1/2 1-1/2SCTBW39-3232 2 2


Code 61PART No. Hose I.D. FlangeSCTBW60-1212 3/4 3/4SCTBW60-1216 3/4 1SCTBW60-1616 1 1SCTBW60-1620 1 1-1/4SCTBW60-2020 1-1/4 1-1/4SCTBW60-2024 1-1/4 1-1/2SCTBW60-2424 1-1/2 1-1/2SCTBW60-3232 2 2



PART No. Hose I.D. TubeSCTBW40-66 3/8 3/8SCTBW40-88 1/2 1/2SCTBW40-1212 3/4 3/4SCTBW40-1216 3/4 1SCTBW40-1616 1 1SCTBW40-2020 1-1/4 1-1/4SCTBW40-2024 1-1/4 1-1/2SCTBW40-2424 1-1/2 1-1/2SCTBW40-3232 2 2


Code 61

PART No. Hose I.D. FlangeSCTBW90-88 1/2 1/2SCTBW90-1212 3/4 3/4SCTBW90-1216 3/4 1SCTBW90-1616 1 1SCTBW90-1620 1 1-1/4SCTBW90-2020 1-1/4 1-1/4SCTBW90-2024 1-1/4 1-1/2SCTBW90-2424 1-1/2 1-1/2SCTBW90-3232 2 2


Face Seal(Swivel)

PART No. Hose I.D. ORFSSCTBW50-66 3/8 11/16 - 16SCTBW50-88 1/2 13/16 - 16SCTBW50-1212 3/4 1-3/16 - 12SCTBW50-1216 3/4 1-7/16 - 12SCTBW50-1616 1 1-7/16 - 12SCTBW50-1620 1 1-11/16 - 12SCTBW50-2020 1-1/4 1-11/16 - 12SCTBW50-2024 1-1/4 2 - 12SCTBW50-2424 1-1/2 2 - 12

MaleO-Ring Boss

PART No. Hose I.D. O-RingSCTBW43-66 3/8 9/16 - 18SCTBW43-88 1/2 3/4 - 16SCTBW43-1212 3/4 1-1/16 - 12SCTBW43-1216 3/4 1-5/16 - 12SCTBW43-1616 1 1-5/16 - 12SCTBW43-1620 1 1-5/8 - 12SCTBW43-2020 1-1/4 1-5/8 - 12SCTBW43-2024 1-1/4 1-7/8 - 12SCTBW43-2424 1-1/2 1-7/8 - 12SCTBW43-3232 2 2-1/2 - 12


Code 61PART No. Hose I.D. FlangeSCTBW45-1212 3/4 3/4SCTBW45-1216 3/4 1SCTBW45-1616 1 1SCTBW45-1620 1 1-1/4SCTBW45-2020 1-1/4 1-1/4SCTBW45-2024 1-1/4 1-1/2SCTBW45-2424 1-1/2 1-1/2SCTBW45-3232 2 2


Code 61



Code 61



INTERCHANGEABLE WITH DAYCO “BW” SERIES COUPLINGS.(They are Fairview Equivalents and are NOT Dayco Original Product.)

STEEL ONE PIECE CRIMP HOSE ENDS(NON SKIVE / BITE-TO-THE-WIRE)

B

34.

CAUTION: Larger diameter hose is subject to “Neck Down”during cut-off operations. This condition does not allow the nippleto be pushed into the hose. When this happens, that portion ofthe hose I.D. must be chamfered with a sharp knife, just enough toallow the nipple to be pushed into the hose. Be sure to removethe cut-off rubber from the assembly.

STEP 1Using a fine-toothed saw orcut-off wheel, cut the hosesquare to the desired length.Clean hose with air pressureto remove dust particles.

STEP 2Dip the end of the hose into alubricant. Use a lightviscosity oil (S.A.E. 10 or 20)

STEP 3Turn the hosecounterclockwise into thesocket until the hose bottoms.

NOTE: Back the hose off at least 1/2turn, check to be sure that there is agap of 1/32" to 1/16" between thehose end and the shoulder on theinside of the socket. Failure toprovide this gap may cause crackingof the socket.

STEP 4Dip the nipple end into alubricant. Refer to step 2.(Light weight oil S.A.E. 10 or20).

STEP 5Turn the stem clockwise intothe hose and socket untilthe stem hex shouldersagainst the ferrule.

USE WITH: S.A.E. 100R1-AT (NON SKIVE) (Page 3-4) USE WITH: S.A.E. 100R2-AT (NON SKIVE) (Page 3-4)

MalePipe

S.A.E. 37°FemaleFlare

(Swivel)

MalePipe

S.A.E. 37°Female

Flare (Swivel)

Male Pipe

NominalPART No. Hose I.D. PipeSCW525-4A 1/4 1/8SCW525-4B 1/4 1/4SCW525-5B 5/16 1/4SCW525-6B 3/8 1/4SCW525-6C 3/8 3/8SCW525-8C 1/2 3/8SCW525-8D 1/2 1/2SCW525-10D 5/8 1/2SCW525-12E 3/4 3/4SCW525-16H 1 1SCW525-20J 1-1/4 1-1/4


(Swivel)

NominalPART No. Hose I.D. TubeSCW538-44 1/4 1/4SCW538-55 5/16 5/16SCW538-66 3/8 3/8SCW538-68 3/8 1/2SCW538-88 1/2 1/2SCW538-108 5/8 1/2SCW538-1010 5/8 5/8SCW538-1212 3/4 3/4SCW538-1616 1 1SCW538-2020 1-1/4 1-1/4


NominalPART No. Hose I.D. TubeSCW537-44 1/4 1/4SCW537-55 5/16 5/16SCW537-66 3/8 3/8SCW537-88 1/2 1/2SCW537-1010 5/8 5/8SCW537-1212 3/4 3/4SCW537-1616 1 1


(Swivel)Nominal

PART No. Hose I.D. TubeSCW528-66 3/8 3/8

NominalPART No. Hose I.D. TubeSCW541-66 3/8 3/8


FOR USE WITH S.A.E. 100R5 HOSE (Page 6) For Crimp Specifications See Page 21.ITEMS SHOWN ARE INTERCHANGEABLE WITH WEATHERHEAD “069E” SERIES COUPLINGS. (They are Fairview Equivalents and are NOT WeatherHead Original Product.)



NominalPART No. Hose I.D. TubeSCW539-44 1/4 1/4SCW539-55 5/16 5/16SCW539-66 3/8 3/8SCW539-88 1/2 1/2SCW539-1010 5/8 5/8



NominalPART No. Hose I.D. TubeSCW540-44 1/4 1/4SCW540-55 5/16 5/16SCW540-66 3/8 3/8SCW540-88 1/2 1/2SCW540-1010 5/8 5/8

PART No. Hose I.D. PipeSRT225-4A 1/4 1/8SRT225-4B 1/4 1/4SRT225-6C 3/8 3/8SRT225-8D 1/2 1/2SRT225-12E 3/4 3/4SRT225-16H 1 1

PART No. Hose I.D. TubeSRT238-44 • 1/4 1/4SRT238-66 • 3/8 3/8SRT238-88 • 1/2 1/2SRT238-810 1/2 5/8SRT238-1010 5/8 5/8SRT238-1212 • 3/4 3/4SRT238-1616 • 1 1

PART No. Hose I.D. PipeSRT125-4A 1/4 1/8SRT125-4B 1/4 1/4SRT125-6C 3/8 3/8SRT125-8D 1/2 1/2

PART No. Hose I.D. TubeSRT138-44 • 1/4 1/4SRT138-66 • 3/8 3/8SRT138-88 • 1/2 1/2SRT138-810 1/2 5/8SRT138-1010 5/8 5/8SRT138-1212 3/4 3/4SRT138-1616 1 1

STEEL REUSABLE HOSE ENDS

• Item is available in stainless steel.Change prefix to "SS" (eg. SSRT238-44)



ASSEMBLY INSTRUCTIONS FOR NON-SKIVE S.A.E. 100R1, 100R2 & 100R5 STEEL REUSABLE HOSE ENDS

B

35.

STEEL REUSABLE HOSE ENDS

Male Pipe

NominalPART No. Hose I.D. PipeSR525-4A • 1/4 1/8SR525-4B • 1/4 1/4SR525-5B 5/16 1/4SR525-6B • 3/8 1/4SR525-6C • 3/8 3/8SR525-8C 1/2 3/8SR525-8D 1/2 1/2SR525-10D • 5/8 1/2SR525-10E 5/8 3/4SR525-12E • 3/4 3/4SR525-16E 1 3/4SR525-16H • 1 1SR525-20J 1-1/4 1-1/4SR525-24K • 1-1/2 1-1/2SR525-32M • 2 2

• Item is available in brass. Change prefix toBR (eg. BR525-4A)


NominalPART No. Hose I.D. TubeSR527-44 1/4 1/4SR527-55 5/16 5/16SR527-66 3/8 3/8SR527-88 1/2 1/2SR527-1010 5/8 5/8SR527-1212 3/4 3/4


(Swivel)

NominalPART No. Hose I.D. TubeSR528-44 • 1/4 1/4SR528-55 • 5/16 5/16SR528-66 • 3/8 3/8SR528-88 • 1/2 1/2SR528-1010 • 5/8 5/8SR528-1212 • 3/4 3/4

• Item is available in brass.Change prefix to BR (eg. BR528-44)

S.A.E. 45°Inverted

Flare(Swivel)

NominalPART No. Hose I.D. TubeSR535-44 1/4 1/4SR535-55 5/16 5/16SR535-66 3/8 3/8SR535-88 1/2 1/2

S.A.E. 37°MALE FLARE

NominalPART No. Hose I.D. TubeSR537-44 1/4 1/4SR537-55 5/16 5/16SR537-66 3/8 3/8SR537-88 1/2 1/2SR537-1010 5/8 5/8SR537-1212 3/4 3/4SR537-1616 1 1

S.A.E. 37°Female Flare(Swivel) TwoPiece Design

NominalPART No. Hose I.D. TubeSR538-44 • 1/4 1/4SR538-55 5/16 5/16SR538-66 • 3/8 3/8SR538-88 • 1/2 1/2SR538-1010 • 5/8 5/8SR538-1012 5/8 3/4SR538-1212 • 3/4 3/4SR538-1616 1 1SR538-2020 1-1/4 1-1/4SR538-2424 1-1/2 1-1/2SR538-3232 2 2

• Item is available in brass.Change prefix to BR (eg. BR538-44)

Male O-RingBoss

NominalPART No. Hose I.D. O-RingSR543-44 1/4 7/16 - 20SR543-55 5/16 1/2 - 20SR543-66 3/8 9/16 - 18SR543-88 1/2 3/4 - 16SR543-1010 5/8 7/8 - 14SR543-1212 3/4 1-1/16 - 12SR543-1616 1 1-5/16 - 12



NominalPART No. Hose I.D. TubeSR539-44 1/4 1/4SR539-55 5/16 5/16SR539-66 3/8 3/8SR539-88 1/2 1/2SR539-1010 5/8 5/8SR539-1212 3/4 3/4SR539-1616 1 1SR539-2020 1-1/4 1-1/4



(Swivel)

NominalPART No. Hose I.D. TubeSR539L-44 1/4 1/4SR539L-55 5/16 5/16SR539L-66 3/8 3/8SR539L-88 1/2 1/2SR539L-1010 5/8 5/8SR539L-1212 3/4 3/4SR539L-1616 1 1SR539L-2020 1-1/4 1-1/4



NominalPART No. Hose I.D. TubeSR541-44 1/4 1/4SR541-66 3/8 3/8SR541-88 1/2 1/2SR541-1212 3/4 3/4


Inverted Flare(Swivel)

NominalPART No. Hose I.D. TubeSR595-44 1/4 1/4SR595-55 5/16 5/16SR595-66 3/8 3/8SR595-88 1/2 1/2SR595-1010 5/8 5/8


Inverted Flare(Swivel)




NominalPART No. Hose I.D. TubeSR540-44 1/4 1/4SR540-55 5/16 5/16SR540-66 3/8 3/8SR540-88 1/2 1/2SR540-1010 5/8 5/8SR540-1212 3/4 3/4SR540-1616 1 1

FOR USE WITH S.A.E. 100R5 HOSE (Page 6)

B

36.

45° ELBOWHose Insert To

Male Pipe

PART No. Hose I.D. PipeS1140-4A 1/4 1/8S1140-4B 1/4 1/4S1140-5A 5/16 1/8S1140-6B 3/8 1/4S1140-6C 3/8 3/8S1140-8C 1/2 3/8S1140-8D 1/2 1/2S1140-10C 5/8 3/8S1140-10D 5/8 1/2S1140-12D 3/4 1/2S1140-12E 3/4 3/4S1140-12H 3/4 1S1140-16E 1 3/4S1140-16H 1 1S1140-20J 1-1/4 1-1/4S1140-24K 1-1/2 1-1/2S1140-32M 2 2

CONNECTORHose Insert To

Male Pipe

PART No. Hose I.D. PipeS1125-4A 1/4 1/8S1125-4B 1/4 1/4S1125-6B 3/8 1/4S1125-6C 3/8 3/8S1125-8B 1/2 1/4S1125-8C 1/2 3/8S1125-8D 1/2 1/2S1125-10C 5/8 3/8S1125-10D 5/8 1/2S1125-10E 5/8 3/4S1125-12D 3/4 1/2S1125-12E 3/4 3/4S1125-12H 3/4 1S1125-16E 1 3/4S1125-16H 1 1S1125-20H 1-1/4 1S1125-20J 1-1/4 1-1/4S1125-24J 1-1/2 1-1/4S1125-24K 1-1/2 1-1/2

90° ELBOWHose Insert To

Male Pipe

PART No. Hose I.D. PipeS1139-4A 1/4 1/8S1139-4B 1/4 1/4S1139-6B 3/8 1/4S1139-6C 3/8 3/8S1139-6D 3/8 1/2S1139-8C 1/2 3/8S1139-8D 1/2 1/2S1139-8E 1/2 3/4S1139-10C 5/8 3/8S1139-10D 5/8 1/2S1139-12C 3/4 3/8S1139-12D 3/4 1/2S1139-12E 3/4 3/4S1139-12H 3/4 1S1139-16E 1 3/4S1139-16H 1 1S1139-20H 1-1/4 1S1139-20J 1-1/4 1-1/4S1139-24K 1-1/2 1-1/2S1139-32M 2 2

CONNECTORHose Insert ToMale O-Ring

PART No. Hose I.D. O-RingSO1125-4 1/4 7/16 - 20SO1125-64 3/8 7/16 - 20SO1125-6 3/8 9/16 - 18SO1125-8 1/2 3/4 - 16SO1125-10 5/8 7/8 - 14SO1125-12 3/4 1-1/16 - 12SO1125-128 3/4 3/4 - 16SO1125-1612 1 1-1/16 - 12SO1125-16 1 1-5/16 - 12SO1125-1620 1 1-5/8 - 12SO1125-2016 1-1/4 1-5/16 - 12SO1125-20 1-1/4 1-5/8 - 12SO1125-2420 1-1/2 1-5/8 - 12SO1125-24 1-1/2 7/16 - 20SO1125-32 2 2-1/2 - 12

90° ELBOWHose Insert ToMale O-Ring

PART No. Hose I.D. O-RingSO1139-4 1/4 7/16 - 20SO1139-6 3/8 9/16 - 18SO1139-86 1/2 9/16 - 18SO1139-8 1/2 3/4 - 16SO1139-108 5/8 3/4 - 16SO1139-10 5/8 7/8 - 14SO1139-128 3/4 3/4 - 16SO1139-1210 3/4 7/8 - 14SO1139-12 3/4 1-1/16 - 12SO1139-1612 1 1-1/16 - 12SO1139-16 1 1-5/16 - 12SO1139-1620 1 1-5/8 - 12SO1139-2016 1-1/4 1-5/16 - 12SO1139-20 1-1/4 1-5/8 - 12SO1139-2024 1-1/4 1-7/8 - 12SO1139-24 1-1/2 1-7/8 - 12SO1139-32 2 2-1/2 - 12

45° ELBOWHose Insert ToMale O-Ring

PART No. Hose I.D. O-RingSO1140-4 1/4 7/16 - 20SO1140-6 3/8 9/16 - 18SO1140-8 1/2 3/4 - 16SO1140-108 5/8 3/4 - 16SO1140-10 5/8 7/8 - 14SO1140-128 3/4 3/4 - 16SO1140-12 3/4 1-1/16 - 12SO1140-1612 1 1-1/16 - 12SO1140-16 1 1-5/16 - 12SO1140-2016 1-1/4 1-5/16 - 12SO1140-20 1-1/4 1-5/8 - 12SO1140-24 1-1/2 1-7/8 - 12SO1140-32 2 2-1/2 - 12

STEEL HOSE INSERTS

FOR USE WITH 100R4 HOSE (Page 5)

B

37.

Male Pipe

NominalPART No. Hose I.D. PipeSCT425-4A 1/4 1/8SCT425-4B 1/4 1/4SCT425-5B 5/16 1/4SCT425-6B 3/8 1/4SCT425-6C 3/8 3/8SCT425-8C 1/2 3/8SCT425-8D 1/2 1/2SCT425-10D 5/8 1/2SCT425-12E 3/4 3/4SCT425-16H 1 1SCT425-20J 1-1/4 1-1/4

FemalePipe

NPSM(Swivel)

NominalPART No. Hose I.D. PipeSCT426SW-4B 1/4 1/4SCT426SW-6C 3/8 3/8SCT426SW-8D 1/2 1/2SCT426SW-12E 3/4 3/4


(Swivel)

NominalPART No. Hose I.D. TubeSCT428-66 3/8 3/8SCT428-1212 3/4 3/4

S.A.E. 45°Inverted

Flare(Swivel)

NominalPART No. Hose I.D. TubeSCT435-44 1/4 1/4SCT435-55 5/16 5/16SCT435-65 3/8 5/16SCT435-66 3/8 3/8SCT435-88 1/2 1/2SCT435-1010 5/8 5/8SCT435-1212 3/4 3/4


(Swivel)Nominal

PART No. Hose I.D. TubeSCT438-44 1/4 1/4SCT438-55 5/16 5/16SCT438-66 3/8 3/8SCT438-68 3/8 1/2SCT438-88 1/2 1/2SCT438-108 5/8 1/2SCT438-1010 5/8 5/8SCT438-1212 3/4 3/4SCT438-1616 1 1


FemaleFlare

(Swivel)

NominalPART No. Hose I.D. TubeSCT439-44 1/4 1/4SCT439-55 5/16 5/16SCT439-66 3/8 3/8SCT439-88 1/2 1/2SCT439-1010 5/8 5/8SCT439-1212 3/4 3/4SCT439-1616 1 1SCT439-2020 1-1/4 1-1/4


FemaleFlare

(Swivel)

NominalPART No. Hose I.D. TubeSCT440-44 1/4 1/4SCT440-55 5/16 5/16SCT440-66 3/8 3/8SCT440-88 1/2 1/2SCT440-1010 5/8 5/8SCT440-1212 3/4 3/4SCT440-1616 1 1


FemaleFlare

(Swivel)



FemaleFlare

(Swivel)


45° ELBOWInverted

Flare(Swivel)

NominalPART No. Hose I.D. TubeSCT445-44 1/4 1/4SCT445-55 5/16 5/16SCT445-66 3/8 3/8SCT445-88 1/2 1/2SCT445-1010 5/8 5/8SCT445-1212 3/4 3/4

StraightTube

NominalPART No. Hose I.D. TubeSCT462-88 1/2 1/2SCT462-108 5/8 1/2SCT462-1010 5/8 5/8SCT462-1212 3/4 3/4

S.A.E.Air Brake

Compression

NominalPART No. Hose I.D. TubeSCT468-88 1/2 1/2SCT468-1010 5/8 5/8SCT468-108 5/8 1/2SCT468-1212 3/4 3/4


Flare(Swivel)

NominalPART No. Hose I.D. PipeSCT495-44 1/4 1/4SCT495-55 5/16 5/16SCT495-65 3/8 5/16SCT495-66 3/8 3/8

ONE PIECE CRIMP ENDS FOR PTFE HOSE

FOR USE WITH S.A.E. 100R14 SMOOTH BORE PTFE HOSE (Page 8)ALL WETTED PARTS ARE BRASS.

B

38.

Male Pipe

Nominal PART No. Hose I.D. PipeSR425-4A 1/4 1/8SR425-4B 1/4 1/4SR425-5B 5/16 1/4SR425-6B 3/8 1/4SR425-6C 3/8 3/8SR425-8C 1/2 3/8SR425-8D 1/2 1/2SR425-10D 5/8 1/2SR425-12E 3/4 3/4SR425-16H 1 1SR425-20J 1-1/4 1-1/4

Female Swivel

45° S.A.E. Flare

NominalPART No. Hose I.D. TubeSR428-44 1/4 1/4SR428-55 5/16 5/16SR428-66 3/8 3/8SR428-88 1/2 1/2SR428-1010 5/8 5/8SR428-1212 3/4 3/4

S.A.E. MaleInverted

FlareSwivel

NominalPART No. Hose I.D. TubeSR435-55 5/16 5/16SR435-66 3/8 3/8SR435-88 1/2 1/2

Female Swivel

37° J.I.C.Flare

NominalPART No. Hose I.D. TubeSR438-44 1/4 1/4SR438-55 5/16 5/16SR438-66 3/8 3/8SR438-88 1/2 1/2SR438-1010 5/8 5/8SR438-1212 3/4 3/4SR438-1616 1 1SR438-2020 1-1/4 1-1/4

StraightTube

Used in conjunction with an 1161 nut & 1160sleeve.

NominalPART No. Hose I.D. TubeSR462-810 1/2 5/8SR462-1010 5/8 5/8SR462-1212 3/4 3/4

S.A.E.Air Brake

Compression

NominalPART No. Hose I.D. TubeSR468-1010 5/8 5/8


FemaleFlare

(Swivel)



FemaleFlare

(Swivel)


ReplacementSleeve

NominalPART No. Hose I.D.SR4S-4 1/4SR4S-5 5/16SR4S-6 3/8SR4S-8 1/2SR4S-10 5/8SR4S-12 3/4SR4S-16 1SR4S-20 1-1/4

PTFE REUSABLE FITTINGS ASSEMBLY INSTRUCTIONS

Step 1Wrap masking tape aroundhose at desired length andcut square with fine-toothhack saw. Trim any loosewires and slip two shells onback to back, placing themabout 3" from each end ofhose.

Step 2Use a flat surface topush the sleeve over the tubeunderneath the wire until thetube stock butts against theinside shoulder of the sleeve.

Step 3Mount stem hex in vise. Workthe hose bore over the stemto size tube.

Step 4Lubricate stem and shellthreads. Push hose onto stemwith twisting motion until hoseseats against stem chamfer.Push shell forward and handstart threading.

Step 5Wrench tighten stem untilclearance with shell is 1/32"or less. Clean, inspect andtest.

STAINLESS STEEL AVAILABLEUPON REQUEST

REUSABLE END FITTINGS FOR PTFE HOSE

FOR USE WITH S.A.E. 100R14 SMOOTH BORE PTFE HOSE (Page 8)ALL WETTED PARTS ARE BRASS

B

39.

BRASS GRIP-TITE HOSE FITTINGSFOR USE WITH GRIP-TITE HOSE (Page 10)

MalePipe

PART No. Hose I.D. Pipe725-4A 1/4 1/8725-4B 1/4 1/4725-4C 1/4 3/8725-5A 5/16 1/8725-5B 5/16 1/4725-6A 3/8 1/8725-6B 3/8 1/4725-6C 3/8 3/8725-6D 3/8 1/2725-8B 1/2 1/4725-8C 1/2 3/8725-8D 1/2 1/2725-8E 1/2 3/4725-10C 5/8 3/8725-10D 5/8 1/2725-10E 5/8 3/4725-12D 3/4 1/2725-12E 3/4 3/4

WorkingMale Pipe

Swivel

PART No. Hose I.D. Pipe725SW-4B 1/4 1/4725SW-6B 3/8 1/4725SW-6C 3/8 3/8725SW-8C 1/2 3/8725SW-8D 1/2 1/2725SW-12E 3/4 3/4

RIGIDFemale

Pipe

PART No. Hose I.D. Tube726-4A 1/4 1/8726-4B 1/4 1/4726-6B 3/8 1/4726-6C 3/8 3/8726-8C 1/2 3/8726-8D 1/2 1/2726-8E 1/2 3/4726-12E 3/4 3/4

45° S.A.E.MaleFlare

PART No. Hose I.D. Tube727-44 1/4 1/4727-45 1/4 5/16727-65 3/8 5/16727-66 3/8 3/8727-88 1/2 1/2

45° S.A.E.Female

Flare Swivel

PART No. Hose I.D. Tube728-44 1/4 1/4728-45 1/4 5/16728-66 3/8 3/8728-68 3/8 1/2728-86 1/2 3/8728-88 1/2 1/2728-810 1/2 5/8728-108 5/8 1/2728-1010 5/8 5/8728-1212 3/4 3/4

HOSESPLICER

PART No. Hose I.D.729-4 1/4729-5 5/16729-6 3/8729-8 1/2729-10 5/8729-12 3/4

Female Straight

PipeSwivel

StraightPART No. Hose I.D. Pipe730-4A 1/4 1/8730-4B 1/4 1/4730-6B 3/8 1/4730-6C 3/8 3/8

Female Straight

PipeSwivel

StraightPART No. Hose I.D. Pipe731-4A 1/4 1/8731-4B 1/4 1/4731-6B 3/8 1/4731-6C 3/8 3/8731-8D 1/2 1/2731-12E 3/4 3/4

RIGIDTube

Shank

PART No. Hose I.D. Tube732-43 1/4 3/16732-44 1/4 1/4732-45 1/4 5/16732-66 3/8 3/8732-88 1/2 1/2732-1010 5/8 5/8

45° S.A.E.Male

InvertedFlare Swivel

PART No. Hose I.D. Tube735-43 1/4 3/16735-44 1/4 1/4735-45 1/4 5/16735-65 3/8 5/16735-66 3/8 3/8735-68 3/8 1/2735-88 1/2 1/2735-1010 5/8 5/8

45° S.A.E.FemaleInvertedFlare

PART No. Hose I.D. Tube736-43 1/4 3/16736-44 1/4 1/4736-45 1/4 5/16736-65 3/8 5/16736-66 3/8 3/8

37° J.I.C.MaleFlare

PART No. Hose I.D. Tube737-44 1/4 1/4737-45 1/4 5/16737-66 3/8 3/8737-88 1/2 1/2

37° J.I.C.Female

Flare Swivel

PART No. Hose I.D. Tube738-44 1/4 1/4738-45 1/4 5/16738-66 3/8 3/8738-88 1/2 1/2738-1010 5/8 5/8738-1212 3/4 3/4

90° ELBOWHose To

Male Pipe

PART No. Hose I.D. Pipe739-4A 1/4 1/8739-4B 1/4 1/4739-6B 3/8 1/4739-6C 3/8 3/8739-8C 1/2 3/8739-8D 1/2 1/2739-12E 3/4 3/4

GASKET TYPE

BALL TYPE

• LUBRICATE HOSE AND BARB.• PUSH HOSE ON FITTING UNTIL

SEATED UNDER PROTECTIVE CAP.• NO CLAMPS REQUIRED WHEN USED

WITH GRIP-TITE HOSE.

ASSEMBLY INSTRUCTIONS

B

40.

CRIMP SPECIFICATIONS FORSynflex® PERMANENTLY ATTACHED HOSE ENDS

Male Pipe

PART No. Hose I.D. PipeSY-3903-02102 1/8 1/8SY-3903-02104 1/8 1/4SY-3903-03102 3/16 1/8SY-3903-03104 3/16 1/4SY-3903-03106 3/16 3/8SY-3903-04102 1/4 1/8SY-3903-04104 * 1/4 1/4SY-3903-04106 1/4 3/8SY-3903-04108 1/4 1/2SY-3903-05104 5/16 1/4SY-3903-05106 5/16 3/8SY-3903-06104 3/8 1/4SY-3903-06106 * 3/8 3/8SY-3903-06108 3/8 1/2SY-3903-08104 1/2 1/4SY-3903-08106 1/2 3/8SY-3903-08108 * 1/2 1/2SY-3903-08112 1/2 3/4SY-3903-12108 3/4 1/2SY-3903-12112 3/4 3/4SY-3903-16116 1 1* Available in Stainless Steel.

PART No. Hose I.D. PipeSY-3903-02142 1/8 1/8SY-3903-02144 1/8 1/4SY-3903-03142 3/16 1/8SY-3903-03144 3/16 1/4SY-3903-04144 1/4 1/4SY-3903-05144 5/16 1/4SY-3903-06146 3/8 3/8SY-3903-06148 3/8 1/2SY-3903-08148 1/2 1/2SY-3903-12152 3/4 3/4SY-3903-16156 1 1


PART No. Hose I.D. PipeSY-3903-02202 1/8 1/8SY-3903-03202 3/16 1/8SY-3903-04204 1/4 1/4SY-3903-04206 1/4 3/8SY-3903-06204 3/8 1/4SY-3903-06206 3/8 3/8SY-3903-06208 3/8 1/2SY-3903-08208 1/2 1/2

FemalePipe

PART No. Hose I.D. PipeSY-3901-02142 1/8 1/8


LUBE HOSE END(FIELD ATTACHABLE)

DASH HOSE Crimp DIA.HOSE DESCRIPTION SIZE I.D. SY-3903 Series3R30 S.A.E. 100R3 -2 1/8 0.35803130 S.A.E. 100R7 -3 3/16 0.47803580 S.A.E. 100R1/100R7 -4 1/4 0.5550

-5 5/16 0.6300-6 3/8 0.6750-8 1/2 0.8250

-12 3/4 1.0800-16 1 1.3400

37AL S.A.E. 100R7 Non-Conductive -3 3/16 0.4780-4 1/4 0.5430-5 5/16 0.6300-6 3/8 0.6750-8 1/2 0.8250

30CT S.A.E. 100R18 -4 1/4 0.5430-5 5/16 0.6300-6 3/8 0.6750-8 1/2 0.8550

DASH HOSE Crimp DIA.HOSE DESCRIPTION SIZE ID SY-390H Series3R80 S.A.E. 100R8 -3 3/16 0.52003E80 S.A.E. 100R8 Non-Conductive -4 1/4 0.6550

-6 3/8 0.7700-8 1/2 0.8800

-12 3/4 1.1250-16 1 1.4600

DASH HOSE Crimp DIA.HOSE DESCRIPTION SIZE ID SY-390N Series3360 Constant Pressure -12 3/4 1.297

DASH HOSE Crimp DIA. HOSE DESCRIPTION SIZE ID SY-3903 Series

3440 Moisture Lok -4 1/4 0.555-6 3/8 0.675-8 1/2 0.825

* Note:For Stainless Steel changeSY-3903 prefix to SY-390A.Monel couplings available

upon request.

For Crimper CompatibilityChart See Page 86

This reference chart is providedby Fairview Fittings &Manufacturing for convenienceonly. The information containedherein cannot be guaranteedbecause conditions of use arebeyond our control, such asvariances in hose outsidediameters. This document shouldnot be substituted for thejudgement of a qualifiedprofessional. Assemblies shouldbe tested prior to installation. Theuser of this information assumesall risk associated with its use.

B

FOR USE WITH SY-3R30, SY-30CT, SY-37AL, SY-3130 AND SY-3580 HOSE(Page 12 - 14 & 17) For Swage / Pusher Chart See Page 21, Crimp Specs. Above.

41.

Synflex® PERMANENTLY ATTACHED HOSE ENDS

PART No. Hose I.D. PipeSY-3903-02244 1/8 1/4SY-3903-03244 3/16 1/4SY-3903-04244 1/4 1/4SY-3903-04246 1/4 3/8SY-3903-05244 5/16 1/4SY-3903-06244 3/8 1/4SY-3903-06246 3/8 3/8SY-3903-08248 1/2 1/2SY-3903-12252 3/4 3/4SY-3903-16256 1 1

FemaleNPSM Pipe

(Swivel)


PART No. Hose I.D. TubeSY-3903-03503 3/16 3/16SY-3903-03504 3/16 1/4SY-3903-04504 1/4 1/4SY-3903-04505 1/4 5/16SY-3903-04506 1/4 3/8SY-3903-05505 5/16 5/16SY-3903-05506 5/16 3/8SY-3903-06505 3/8 5/16SY-3903-06506 3/8 3/8SY-3903-06508 3/8 1/2SY-3903-08508 1/2 1/2SY-3903-08510 1/2 5/8SY-3903-08512 1/2 3/4SY-3903-12512 3/4 3/4SY-3903-12514 3/4 7/8SY-3903-12516 3/4 1SY-3903-16516 1 1

PART No. Hose I.D. TubeSY-3903-02543 1/8 3/16SY-3903-02544 1/8 1/4SY-3903-02545 1/8 5/16SY-3903-03543 3/16 3/16SY-3903-03544 3/16 1/4SY-3903-03545 3/16 5/16SY-3903-04544 * 1/4 1/4SY-3903-04545 1/4 5/16SY-3903-04545-003 1/4 5/16SY-3903-04546 1/4 3/8SY-3903-05544 5/16 1/4SY-3903-05545 5/16 5/16SY-3903-05546 5/16 3/8SY-3903-06544 3/8 1/4SY-3903-06545 3/8 5/16SY-3903-06546 3/8 3/8SY-3903-06548 3/8 1/2SY-3903-06550 3/8 5/8SY-3903-08548 * 1/2 1/2SY-3903-08550 1/2 5/8SY-3903-08552 1/2 3/4SY-3903-12550 3/4 5/8SY-3903-12552 3/4 3/4SY-3903-12554 3/4 7/8SY-3903-12556 3/4 1SY-3903-16556 1 1

* Available in Stainless Steel.


(Swivel)


PART No. Hose I.D. TubeSY-3903-03943 3/16 3/16SY-3903-03944 3/16 1/4SY-3903-04945 1/4 5/16SY-3903-05946 5/16 3/8SY-3903-06945 3/8 5/16SY-3903-06946 3/8 3/8SY-3903-08946 1/2 3/8SY-3903-08948 1/2 1/2SY-3903-12950 3/4 5/8SY-3903-12952 3/4 3/4SY-3903-16956 1 1

PART No. Hose I.D. TubeSY-3903-03544 3/16 1/4SY-3903-03545 3/16 5/16SY-3903-04544 1/4 1/4SY-3903-04545 1/4 5/16SY-3903-04A06 1/4 3/8SY-3903-05545 5/16 5/16SY-3903-05A06 5/16 3/8SY-3903-06A06 3/8 3/8SY-3903-06548 3/8 1/2SY-3903-08548 1/2 1/2SY-3903-08550 1/2 5/8SY-3903-12A12 3/4 3/4SY-3903-16A16 1 1


(Swivel)

FOR USE WITH SY-3R30, SY-30CT, SY-37AL, SY-3130 AND SY-3580 HOSE(Page 12 - 14 & 17) Swage / Pusher Chart Page 21, Crimp Specs. Page 40.


upon request.

MaleO-Ring Boss


PART No. Hose I.D. ORFSSY-3903-02404 1/8 9/16 - 18SY-3903-04404 1/4 9/16 - 18SY-3903-05404 5/16 9/16 - 18SY-3903-05406 5/16 11/16 -16SY-3903-06406 3/8 11/16 - 16SY-3903-06408 3/8 13/16 - 16SY-3903-08408 1/2 13/16 - 16SY-3903-12412 3/4 1-3/16 - 12SY-3903-16416 1 1-5/16 - 12

S.A.E.FlarelessMale End

PART No. Hose I.D. TubeSY-3903-04K44 1/4 1/4SY-3903-06K46 3/8 3/8SY-3903-06K48 1/2 1/2

Nut and sleeve sold separately(S6761 and S6760 see page: 60)

PART No. Hose I.D. O-RingSY-3903-02D02 1/8 5/16 - 24SY-3903-03D04 3/16 7/16 - 20SY-3903-04D05 1/4 1/2 - 20SY-3903-04D06 1/4 9/16 - 18SY-3903-05D04 5/16 7/16 - 20SY-3903-05D05 5/16 1/2 - 20SY-3903-05D06 5/16 9/16 - 18SY-3903-06D06 3/8 9/16 - 18SY-3903-06D08 3/8 3/4 - 16SY-3903-06D10 3/8 7/8 - 14SY-3903-08D08 1/2 3/4 - 16SY-3903-08D10 1/2 7/8 - 14SY-3903-12D12 3/4 1-1/16 - 12SY-3903-16D16 1 1-5/16 - 12

B

42.


FOR USE WITH SY-3R30, SY-30CT, SY-37AL, SY-3130 AND SY-3580 HOSE(Page 12 - 14 & 17) Swage / Pusher Chart Page 21, Crimp Specs. Page 40.


PART No. Hose I.D. PipeSY-3903-04274 1/4 1/4SY-3903-06276 3/8 3/8SY-3903-08278 1/2 1/2

StraightTube

PART No. Hose I.D. Tube O.D.SY-3903-04J04 1/4 1/4SY-3903-06J06 3/8 3/8SY-3903-08J08 1/2 1/2



PART No. Hose I.D. TubeSY-3903-02643 1/8 3/16SY-3903-02644 1/8 1/4SY-3903-03644 3/16 1/4SY-3903-04644 1/4 1/4SY-3903-04645 1/4 5/16SY-3903-04646 1/4 3/8SY-3903-05645 5/16 5/16SY-3903-05646 5/16 3/8SY-3903-06644 3/8 1/4SY-3903-06646 3/8 3/8SY-3903-06648 3/8 1/2SY-3903-06650 3/8 5/8SY-3903-08648 1/2 1/2SY-3903-08650 1/2 5/8SY-3903-12650 3/4 5/8SY-3903-12652 3/4 3/4SY-3903-12654 3/4 7/8SY-3903-12656 3/4 1SY-3903-16652 1 3/4SY-3903-16656 1 1


Face Seal(Swivel)

PART No. Hose I.D. ORFSSY-3903-02474 1/8 9/16 - 18SY-3903-04474 1/4 9/16 - 18SY-3903-05474 5/16 9/16 - 18SY-3903-05476 5/16 11/16 - 16SY-3903-06476 3/8 11/16 - 16SY-3903-08478 1/2 13/16 - 16SY-3903-12482 3/4 1-3/16 - 12

90° ELBOW (LONG STYLE)Female O-Ring

Face Seal(Swivel)

PART No. Hose I.D. ORFSSY-3903-04674 1/4 9/16 - 18SY-3903-05674 5/16 9/16 - 18SY-3903-05676 5/16 11/16 - 16SY-3903-06676 3/8 11/16 - 16SY-3903-08678 1/2 13/16 - 16SY-3903-12682 3/4 1-3/16 - 12



(Swivel)

PART No. Hose I.D. TubeSY-3903-02843 1/8 3/16SY-3903-03844 3/16 1/4SY-3903-04844 1/4 1/4SY-3903-04845 1/4 5/16SY-3903-04846 1/4 3/8SY-3903-05846 5/16 3/8SY-3903-06846 3/8 3/8SY-3903-06848 3/8 1/2SY-3903-08848 1/2 1/2SY-3903-08850 1/2 5/8SY-3903-12852 3/4 3/4SY-3903-12854 3/4 7/8SY-3903-16856 1 1



PART No. Hose I.D. TubeSY-3903-03604 3/16 1/4SY-3903-04604 1/4 1/4SY-3903-04605 1/4 5/16SY-3903-04606 1/4 3/8SY-3903-05606 5/16 3/8SY-3903-06606 3/8 3/8SY-3903-06608 3/8 1/2SY-3903-08608 1/2 1/2SY-3903-08610 1/2 5/8SY-3903-12612 3/4 3/4SY-3903-16616 1 1


Face Seal(Swivel)

PART No. Hose I.D. ORFSSY-3903-02444 1/8 9/16 - 18SY-3903-04444 1/4 9/16 - 18SY-3903-05444 5/16 9/16 - 18SY-3903-05446 5/16 11/16 - 16SY-3903-06446 3/8 11/16 - 16SY-3903-08448 1/2 13/16 - 16SY-3903-12452 3/4 1-3/16 - 12


upon request.

B

43.

FOR USE WITH SY-3E80 and SY-3R80 HOSE(Pages 15 & 16) Swage / Pusher Chart Page 21, Crimp Specs. Page 40.

Male Pipe

PART No. Hose I.D. PipeSY-390H-03102 3/16 1/8 SY-390H-03104 3/16 1/4 SY-390H-03106 3/16 3/8 SY-390H-04102 1/4 1/8 SY-390H-04104 * 1/4 1/4 SY-390H-04106 1/4 3/8 SY-390H-04108 1/4 1/2 SY-390H-05104 5/16 1/4 SY-390H-06104 3/8 1/4 SY-390H-06106 * 3/8 3/8 SY-390H-06108 * 3/8 1/2 SY-390H-08106 1/2 3/8 SY-390H-08108 * 1/2 1/2 SY-390H-08112 1/2 3/4 SY-390H-10108 5/8 1/2 SY-390H-12108 3/4 1/2 SY-390H-12112 * 3/4 3/4 SY-390H-16116 * 1 1


PART No. Hose I.D. PipeSY-390H-03144 3/16 1/4SY-390H-04144 1/4 1/4SY-390H-06146 3/8 3/8SY-390H-06148 3/8 1/2SY-390H-08148 1/2 1/2SY-390H-12152 3/4 3/4SY-390H-16156 1 1


PART No. Hose I.D. PipeSY-390H-03202 3/16 1/8SY-390H-03204 3/16 1/4SY-390H-04204 1/4 1/4SY-390H-04206 1/4 3/8SY-390H-06206 3/8 3/8SY-390H-06208 3/8 1/2SY-390H-08208 1/2 1/2

FemalePipe


PART No. Hose I.D. TubeSY-390H-03504 3/16 1/4SY-390H-04504 1/4 1/4SY-390H-04505 1/4 5/16SY-390H-04506 1/4 3/8SY-390H-06506 3/8 3/8SY-390H-06508 3/8 1/2SY-390H-08508 1/2 1/2SY-390H-08510 1/2 5/8SY-390H-08512 1/2 3/4SY-390H-12512 3/4 3/4SY-390H-12514 3/4 7/8SY-390H-12516 3/4 1SY-390H-16516 1 1

PART No. Hose I.D. TubeSY-390H-03544 * 3/16 1/4SY-390H-03545 3/16 5/16SY-390H-04544 * 1/4 1/4SY-390H-04545 1/4 5/16SY-390H-04546 1/4 3/8SY-390H-05546 5/16 3/8SY-390H-06544 3/8 1/4SY-390H-06545 3/8 5/16SY-390H-06546 * 3/8 3/8SY-390H-06548 * 3/8 1/2SY-390H-06550 3/8 5/8SY-390H-08548 * 1/2 1/2SY-390H-08550 * 1/2 5/8SY-390H-08552 1/2 3/4SY-390H-10550 5/8 5/8SY-390H-10552 5/8 3/4SY-390H-12550 3/4 5/8SY-390H-12552 * 3/4 3/4SY-390H-16556 1 1



(Swivel)


PART No. Hose I.D. TubeSY-390H-03944 3/16 1/4SY-390H-04945 1/4 5/16SY-390H-06946 3/8 3/8SY-390H-08948 1/2 1/2SY-390H-12950 3/4 5/8SY-390H-12952 3/4 3/4SY-390H-16956 1 1

PART No. Hose I.D. PipeSY-390H-03244 3/16 1/4SY-390H-04244 1/4 1/4SY-390H-06244 3/8 1/4SY-390H-06246 3/8 3/8SY-390H-08248 1/2 1/2SY-390H-12252 3/4 3/4SY-390H-16256 1 1

FemaleNPSM Pipe

(Swivel)

PART No. Hose I.D. TubeSY-390H-03544 3/16 1/4SY-390H-03545 3/16 5/16SY-390H-04544 1/4 1/4SY-390H-04545 1/4 5/16SY-390H-04A06 1/4 3/8SY-390H-06A06 3/8 3/8SY-390H-06548 3/8 1/2SY-390H-08548 1/2 1/2SY-390H-08550 1/2 5/8SY-390H-12A12 3/4 3/4SY-390H-16A16 1 1


(Swivel)

Male O-RingBoss

PART No. Hose I.D. O-RingSY-390H-03D04 3/16 7/16 - 20SY-390H-03D06 3/16 9/16 - 18SY-390H-04D05 1/4 1/2 - 20SY-390H-04D06 1/4 9/16 - 18SY-390H-06D06 3/8 9/16 - 18SY-390H-06D08 3/8 3/4 - 16SY-390H-06D10 3/8 7/8 - 14SY-390H-08D08 1/2 3/4 - 16SY-390H-08D10 1/2 7/8 - 14SY-390H-08D12 1/2 1-1/16 - 12SY-390H-12D12 3/4 1-1/16 - 12SY-390H-16D16 1 1-5/16 - 12

Note:For Stainless Steel changeSY-390H prefix to SY-390L.Monel couplings available

upon request.


B

44.


FOR USE WITH SY-3E80 AND SY-3R80 HOSE(Pages 15, 16) Swage / Pusher Chart Page 21, Crimp Specs. Page 40.


PART No. Hose I.D. PipeSY-390H-06276 3/8 3/8SY-390H-08278 1/2 1/2


PART No. Hose I.D. ORFSSY-390H-04404 1/4 9/16 - 18SY-390H-06406 3/8 11/16 - 16SY-390H-08408 1/2 13/16 - 16SY-390H-08410 1/2 1 - 14SY-390H-10410 5/8 1 - 14SY-390H-10412 5/8 1-3/16 - 12SY-390H-12412 3/4 1-3/16 - 12SY-390H-16416 1 1-5/16 - 12



PART No. Hose I.D. TubeSY-390H-03644 3/16 1/4SY-390H-04644 1/4 1/4SY-390H-04645 1/4 5/16SY-390H-04646 1/4 3/8SY-390H-05646 5/16 3/8SY-390H-06644 3/8 1/4SY-390H-06646 3/8 3/8SY-390H-06648 3/8 1/2SY-390H-06650 3/8 5/8SY-390H-08648 1/2 1/2SY-390H-08650 1/2 5/8SY-390H-10652 5/8 3/4SY-390H-12650 3/4 5/8SY-390H-12652 3/4 3/4SY-390H-12654 3/4 7/8SY-390H-12656 3/4 1SY-390H-16652 1 3/4SY-390H-16656 1 1



(Swivel)

PART No. Hose I.D. TubeSY-390H-03844 3/16 1/4SY-390H-04844 1/4 1/4SY-390H-04845 1/4 5/16SY-390H-04846 1/4 3/8SY-390H-06846 3/8 3/8SY-390H-06848 3/8 1/2SY-390H-08848 1/2 1/2SY-390H-08850 1/2 5/8SY-390H-10850 5/8 5/8SY-390H-12852 3/4 3/4SY-390H-12854 3/4 7/8SY-390H-16856 1 1


Face Seal(Swivel)

PART No. Hose I.D. ORFSSY-390H-04474 1/4 9/16 - 18SY-390H-06476 3/8 11/16 - 16SY-390H-08478 1/2 13/16 - 16SY-390H-12482 3/4 1-3/16 - 12


Face Seal(Swivel)




PART No. Hose I.D. TubeSY-390H-03604 3/16 1/4SY-390H-04604 1/4 1/4SY-390H-04605 1/4 5/16SY-390H-06606 3/8 3/8SY-390H-06608 3/8 1/2SY-390H-08608 1/2 1/2SY-390H-08610 1/2 5/8SY-390H-12612 3/4 3/4SY-390H-16616 1 1


Face Seal(Swivel)


Note:For Stainless Steel changeSY-390H prefix to SY-390L.Monel couplings available

upon request.


(Swivel)

Male Pipe

PART No. Hose I.D. PipeSY-390N-12112 3/4 3/4

PART No. Hose I.D. TubeSY-390N-12552 3/4 3/4

FOR USE WITH SY-3360 HOSE (Page 20)

B

90° ELBOWFemale 37°Swivel ToMale JIC

PART No. Swivel TubeS3549-3 3/16 3/16S3549-4 1/4 1/4S3549-46 1/4 3/8S3549-5 5/16 5/16S3549-6 3/8 3/8S3549-68 3/8 1/2S3549-8 1/2 1/2S3549-86 1/2 3/8S3549-810 1/2 5/8S3549-812 1/2 3/4S3549-10 5/8 5/8S3549-108 5/8 1/2S3549-1012 5/8 3/4S3549-12 3/4 3/4S3549-128 3/4 1/2S3549-1210 3/4 5/8S3549-1216 3/4 1S3549-14 7/8 7/8S3549-16 1 1S3549-1612 1 3/4S3549-20 1-1/4 1-1/4S3549-24 1-1/2 1-1/2S3549-32 2 2

90° ELBOWFemale 37°Swivel ToMale Pipe

PART No. Swivel PipeS3516-4A 1/4 1/8S3516-4B 1/4 1/4S3516-6B 3/8 1/4S3516-6C 3/8 3/8S3516-6D 3/8 1/2S3516-8C 1/2 3/8S3516-8D 1/2 1/2S3516-10D 5/8 1/2S3516-12E 3/4 3/4S3516-16H 1 1S3516-20J 1-1/4 1-1/4S3516-24K 1-1/2 1-1/2S3516-32M 2 2

PART No. Swivel PipeS3520-4A 1/4 1/8S3520-4B 1/4 1/4S3520-5B 5/16 1/4S3520-6B 3/8 1/4S3520-6C 3/8 3/8S3520-8C 1/2 3/8S3520-8D 1/2 1/2S3520-10C 5/8 3/8S3520-10D 5/8 1/2S3520-10E 5/8 3/4S3520-12D 3/4 1/2S3520-12E 3/4 3/4S3520-16E 1 3/4S3520-16H 1 1S3520-20J 1-1/4 1-1/4S3520-24K 1-1/2 1-1/2S3520-32M 2 2

CONNECTORFemale 37°Swivel ToMale Pipe

PART No. Swivel O-RingS3522-4 1/4 7/16 - 20S3522-42 1/4 5/16 - 24S3522-6 3/8 9/16 - 18S3522-64 3/8 7/16 - 20S3522-8 1/2 3/4 - 16S3522-86 1/2 9/16 - 18S3522-810 1/2 7/8 - 14S3522-10 5/8 7/8 - 14S3522-12 3/4 1-1/16 - 12S3522-1216 3/4 1-5/16 - 12S3522-16 1 1-5/16 - 12S3522-20 1-1/4 1-5/8 - 12S3522-24 1-1/2 1-7/8 - 12

CONNECTORFemale 37°Swivel To

Male O-Ring

PART No. Swivel TubeS3548-4 1/4 1/4S3548-6 3/8 3/8S3548-8 1/2 1/2S3548-10 5/8 5/8S3548-12 3/4 3/4S3548-16 1 1S3548-20 1-1/4 1-1/4

CONNECTORFemale 37°Swivel ToMale JIC

PART No. Swivel PipeS3526-4A 1/4 1/8S3526-4B 1/4 1/4S3526-6B 3/8 1/4S3526-6C 3/8 3/8S3526-6D 3/8 1/2S3526-8C 1/2 3/8S3526-8D 1/2 1/2S3526-10C 5/8 3/8S3526-10D 5/8 1/2S3526-10E 5/8 3/4S3526-12E 3/4 3/4S3526-16H 1 1S3526-20J 1-1/4 1-1/4S3526-24K 1-1/2 1-1/2S3526-32M 2 2


Female Pipe

PART No. Swivel ORFSS3535-4 1/4 9/16 - 18S3535-6 3/8 11/16 - 16S3535-8 1/2 13/16 - 16S3535-10 5/8 1 - 14S3535-12 3/4 1-3/16 - 12S3535-16 1 1-7/16 - 12S3535-20 1-1/4 1-11/16 - 12



PART No. SwivelS3542-4 1/4S3542-6 3/8S3542-8 1/2S3542-12 3/4S3542-16 1

UNIONFemale 37°

Swivel

90° ELBOWFemale 37° ToFemale Pipe

PART No. Swivel PipeS3550-4B 1/4 1/4S3550-6B 3/8 1/4S3550-6C 3/8 3/8S3550-8C 1/2 3/8S3550-8D 1/2 1/2S3550-10D 5/8 1/2S3550-12E 3/4 3/4

45.

C

STEEL 37° J.I.C. FLARE SWIVEL ADAPTERS

46.

45° ELBOWFemale 37°Swivel ToMale JIC

PART No. Swivel TubeS3554-4 1/4 1/4S3554-5 5/16 5/16S3554-6 3/8 3/8S3554-8 1/2 1/2S3554-10 5/8 5/8S3554-12 3/4 3/4S3554-14 7/8 7/8S3554-16 1 1S3554-20 1-1/4 1-1/4S3554-24 1-1/2 1-1/2S3554-32 2 2

TEETube To Female

37° Swivel ToMale JIC

PART No. Swivel TubeS3551-4 1/4 1/4S3551-5 5/16 5/16S3551-6 3/8 3/8S3551-8 1/2 1/2S3551-812 1/2 3/4S3551-10 5/8 5/8S3551-12 3/4 3/4S3551-14 7/8 7/8S3551-16 1 1S3551-20 1-1/4 1-1/4S3551-24 1-1/2 1-1/2S3551-32 2 2

TEEMale JIC ToMale JIC ToFemale 37°

Swivel

PART No. Swivel TubeS3545-3 3/16 3/16S3545-4 1/4 1/4S3545-5 5/16 5/16S3545-6 3/8 3/8S3545-68 3/8 1/2S3545-8 1/2 1/2S3545-10 5/8 5/8S3545-12 3/4 3/4S3545-14 7/8 7/8S3545-16 1 1S3545-20 1-1/4 1-1/4S3545-24 1-1/2 1-1/2S3545-32 2 2

45° BENT TUBEELBOW

Female 37°Swivel ToMale JIC

PART No. Swivel TubeS3554BT-6 3/8 3/8S3554BT-8 1/2 1/2S3554BT-10 5/8 5/8S3554BT-12 3/4 3/4S3554BT-16 1 1

90° ELBOWFemale 37°Swivel To

Male O-Ring

PART No. Swivel O-RingS3599-4 1/4 7/16 - 20S3599-6 3/8 9/16 - 18S3599-68 3/8 3/4 - 16S3599-8 1/2 3/4 - 16S3599-10 5/8 7/8 - 14S3599-1012 5/8 1-1/16 - 12S3599-12 3/4 1-1/16 - 12S3599-16 1 1-5/16 - 12S3599-20 1-1/4 1-5/8 - 12

90° BENT TUBEELBOW

Female 37°Swivel ToMale JIC

DropPART No. Swivel Tube LengthS3549BT-4 1/4 1/4 0.68S3549BT-6 3/8 3/8 0.86S3549BT-8 1/2 1/2 1.09S3549BT-10 5/8 5/8 1.23S3549BT-12 3/4 3/4 1.83S3549BT-16 1 1 2.14

90° BENT TUBEELBOW

(LONG STYLE)Female 37°Swivel ToMale JIC

DropPART No. Swivel Tube LengthS3549LBT-4 1/4 1/4 1.80S3549LBT-6 3/8 3/8 2.18S3549LBT-8 1/2 1/2 2.44S3549LBT-10 5/8 5/8 2.58S3549LBT-12 3/4 3/4 3.73S3549LBT-16 1 1 4.33

STEEL 37° J.I.C. FLARE SWIVEL ADAPTERS

C

STEEL 37° J.I.C. FLARE ADAPTERS

SLEEVENUT

PART No. TubeS3720-2 1/8S3720-3 3/16S3720-4 1/4S3720-5 5/16S3720-6 3/8S3720-8 1/2S3720-10 5/8S3720-12 3/4S3720-14 7/8S3720-16 1S3720-20 1-1/4S3720-24 1-1/2S3720-32 2

SLEEVE


REDUCERFemale JICTo Male JIC

(ONE PIECE TYPE)Female Male

PART No. Tube TubeS3735-46 1/4 3/8S3735-64 3/8 1/4S3735-65 3/8 5/16S3735-68 3/8 1/2S3735-84 1/2 1/4S3735-86 1/2 3/8S3735-810 1/2 5/8S3735-812 1/2 3/4S3735-104 5/8 1/4S3735-106 5/8 3/8S3735-108 5/8 1/2S3735-1012 5/8 3/4S3735-124 3/4 1/4S3735-126 3/4 3/8S3735-128 3/4 1/2S3735-1210 3/4 5/8S3735-1216 3/4 1S3735-146 7/8 3/8S3735-148 7/8 1/2S3735-1410 7/8 5/8S3735-1412 7/8 3/4S3735-164 1 1/4S3735-166 1 3/8S3735-168 1 1/2S3735-1610 1 5/8S3735-1612 1 3/4S3735-1614 1 7/8S3735-1620 1 1-1/4S3735-208 1-1/4 1/2S3735-2010 1-1/4 5/8S3735-2012 1-1/4 3/4S3735-2016 1-1/4 1S3735-2024 1-1/4 1-1/2S3735-2410 1-1/2 5/8S3735-2412 1-1/2 3/4S3735-2416 1-1/2 1S3735-2420 1-1/2 1-1/4S3735-2432 1-1/2 2S3735-3220 2 1-1/4S3735-3224 2 1-1/2

UNIONMale JIC To Male

JICPART No. Tube TubeS3742-2 1/8 1/8S3742-3 3/16 3/16S3742-4 1/4 1/4S3742-42 1/4 1/8S3742-43 1/4 3/16S3742-5 5/16 5/16S3742-54 5/16 1/4S3742-6 3/8 3/8S3742-64 3/8 1/4S3742-65 3/8 5/16S3742-8 1/2 1/2S3742-84 1/2 1/4S3742-86 1/2 3/8S3742-10 5/8 5/8S3742-106 5/8 3/8S3742-108 5/8 1/2S3742-12 3/4 3/4S3742-126 3/4 3/8S3742-128 3/4 1/2S3742-1210 3/4 5/8S3742-14 7/8 7/8S3742-1412 7/8 3/4S3742-16 1 1S3742-1612 1 3/4S3742-20 1-1/4 1-1/4S3742-2012 1-1/4 3/4S3742-2016 1-1/4 1S3742-24 1-1/2 1-1/2S3742-2416 1-1/2 1S3742-2420 1-1/2 1-1/4S3742-32 2 2

UNIONMale JIC To Male

JIC(LARGE HEX)

PART No. TubeS3742H-4 1/4S3742H-5 5/16S3742H-6 3/8S3742H-8 1/2S3742H-10 5/8S3742H-12 3/4S3742H-16 1S3742H-20 1-1/4S3742H-24 1-1/2

CONNECTORMale JIC ToFemale Pipe

PART No. Tube PipeS3746-2A 1/8 1/8S3746-3A 3/16 1/8S3746-4A 1/4 1/8S3746-4B 1/4 1/4S3746-4C 1/4 3/8S3746-5A 5/16 1/8S3746-5B 5/16 1/4S3746-6A 3/8 1/8S3746-6B 3/8 1/4S3746-6C 3/8 3/8S3746-6D 3/8 1/2S3746-8B 1/2 1/4S3746-8C 1/2 3/8S3746-8D 1/2 1/2S3746-8E 1/2 3/4S3746-10C 5/8 3/8S3746-10D 5/8 1/2S3746-10E 5/8 3/4S3746-12D 3/4 1/2S3746-12E 3/4 3/4S3746-12H 3/4 1S3746-14E 7/8 3/4S3746-16E 1 3/4S3746-16H 1 1S3746-16J 1 1-1/4S3746-20H 1-1/4 1S3746-20J 1-1/4 1-1/4S3746-20K 1-1/4 1-1/2S3746-24K 1-1/2 1-1/2S3746-32M 2 2

TUBE NUT(LONG TYPE)

PART No. TubeS3719-3 3/16S3719-4 1/4S3719-5 5/16S3719-6 3/8S3719-8 1/2S3719-10 5/8S3719-12 3/4S3719-14 7/8S3719-16 1S3719-20 1-1/4S3719-24 1-1/2S3719-32 2

REDUCERFemale JICTo Male JIC

(TWO PIECE TYPE)

• ORDER NUT SEPARATELYFemale Male

PART No. Tube TubeS3735S-86 1/2 3/8S3735S-104 5/8 1/4

47.

C

48.

90° ELBOWMale JIC ToMale Pipe

PART No. Tube PipeS3749-2A 1/8 1/8S3749-2B 1/8 1/4S3749-3A 3/16 1/8S3749-4A 1/4 1/8S3749-4B 1/4 1/4S3749-4C 1/4 3/8S3749-4D 1/4 1/2S3749-4E 1/4 3/4S3749-5A 5/16 1/8S3749-5B 5/16 1/4S3749-5C 5/16 3/8S3749-5D 5/16 1/2S3749-6A 3/8 1/8S3749-6B 3/8 1/4S3749-6C 3/8 3/8S3749-6D 3/8 1/2S3749-6E 3/8 3/4S3749-8B 1/2 1/4S3749-8C 1/2 3/8S3749-8D 1/2 1/2S3749-8E 1/2 3/4S3749-8H 1/2 1S3749-10C 5/8 3/8S3749-10D 5/8 1/2S3749-10E 5/8 3/4S3749-10H 5/8 1S3749-12C 3/4 3/8S3749-12D 3/4 1/2S3749-12E 3/4 3/4S3749-12H 3/4 1S3749-12J 3/4 1-1/4S3749-14E 7/8 3/4S3749-16D 1 1/2S3749-16E 1 3/4S3749-16H 1 1S3749-16J 1 1-1/4S3749-16K 1 1-1/2S3749-20E 1-1/4 3/4S3749-20H 1-1/4 1S3749-20J 1-1/4 1-1/4S3749-20K 1-1/4 1-1/2S3749-24H 1-1/2 1S3749-24J 1-1/2 1-1/4S3749-24K 1-1/2 1-1/2S3749-32K 2 1-1/2S3749-32M 2 2

CONNECTORMale JIC ToMale Pipe

PART No. Tube PipeS3748-2A 1/8 1/8S3748-3A 3/16 1/8S3748-4A 1/4 1/8S3748-4B 1/4 1/4S3748-4C 1/4 3/8S3748-4D 1/4 1/2S3748-4E 1/4 3/4S3748-5A 5/16 1/8S3748-5B 5/16 1/4S3748-5C 5/16 3/8S3748-6A 3/8 1/8S3748-6B 3/8 1/4S3748-6C 3/8 3/8S3748-6D 3/8 1/2S3748-6E 3/8 3/4S3748-8A 1/2 1/8S3748-8B 1/2 1/4S3748-8C 1/2 3/8S3748-8D 1/2 1/2S3748-8E 1/2 3/4S3748-8H 1/2 1S3748-10B 5/8 1/4S3748-10C 5/8 3/8S3748-10D 5/8 1/2S3748-10E 5/8 3/4S3748-10H 5/8 1S3748-12C 3/4 3/8S3748-12D 3/4 1/2S3748-12E 3/4 3/4S3748-12H 3/4 1S3748-12J 3/4 1-1/4S3748-12K 3/4 1-1/2S3748-14D 7/8 1/2S3748-14E 7/8 3/4S3748-16D 1 1/2S3748-16E 1 3/4S3748-16H 1 1S3748-16J 1 1-1/4S3748-16K 1 1-1/2S3748-20E 1-1/4 3/4S3748-20H 1-1/4 1S3748-20J 1-1/4 1-1/4S3748-20K 1-1/4 1-1/2S3748-24H 1-1/2 1S3748-24J 1-1/2 1-1/4S3748-24K 1-1/2 1-1/2S3748-24M 1-1/2 2S3748-32H 2 1S3748-32J 2 1-1/4S3748-32K 2 1-1/2S3748-32M 2 2

CAP NUT


Male JICPLUG

PART No. TubeS3758-3 3/16S3758-4 1/4S3758-5 5/16S3758-6 3/8S3758-8 1/2S3758-10 5/8S3758-12 3/4S3758-14 7/8S3758-16 1S3758-20 1-1/4S3758-24 1-1/2S3758-32 2


Male JIC ToMale Pipe

PART No. Tube PipeS3749L-4A 1/4 1/8S3749L-4B 1/4 1/4S3749L-5A 5/16 1/8S3749L-5B 5/16 1/4S3749L-6A 3/8 1/8S3749L-6B 3/8 1/4S3749L-6C 3/8 3/8S3749L-6D 3/8 1/2S3749L-8B 1/2 1/4S3749L-8C 1/2 3/8S3749L-8D 1/2 1/2S3749L-8E 1/2 3/4S3749L-10D 5/8 1/2S3749L-10E 5/8 3/4S3749L-12D 3/4 1/2S3749L-12E 3/4 3/4S3749L-14E 7/8 3/4S3749L-16E 1 3/4S3749L-16H 1 1S3749L-20J 1-1/4 1-1/4S3749L-24K 1-1/2 1-1/2

90° ELBOW(EXTRA LONG

STYLE)Male JIC ToMale Pipe

PART No. Tube PipeS3749EL-4A 1/4 1/8S3749EL-4B 1/4 1/4S3749EL-5A 5/16 1/8S3749EL-5B 5/16 1/4S3749EL-6B 3/8 1/4S3749EL-6C 3/8 3/8S3749EL-6D 3/8 1/2S3749EL-8C 1/2 3/8S3749EL-8D 1/2 1/2S3749EL-10D 5/8 1/2S3749EL-12D 3/4 1/2S3749EL-12E 3/4 3/4S3749EL-14E 7/8 3/4S3749EL-16E 1 3/4S3749EL-16H 1 1S3749EL-20J 1-1/4 1-1/4S3749EL-24K 1-1/2 1-1/2


C

49.


TEEMale JIC ToMale JIC ToFemale Pipe

PART No. Tube PipeS3736-4A 1/4 1/8S3736-4B 1/4 1/4S3736-5A 5/16 1/8S3736-6B 3/8 1/4S3736-6C 3/8 3/8S3736-8C 1/2 3/8S3736-8D 1/2 1/2S3736-10D 5/8 1/2S3736-10E 5/8 3/4S3736-12D 3/4 1/2S3736-12E 3/4 3/4S3736-14E 7/8 3/4S3736-16E 1 3/4S3736-16H 1 1S3736-20J 1-1/4 1-1/4S3736-24K 1-1/2 1-1/2S3736-32M 2 2

45° ELBOWMale JIC ToMale Pipe

PART No. Tube PipeS3754-2A 1/8 1/8S3754-3A 3/16 1/8S3754-4A 1/4 1/8S3754-4B 1/4 1/4S3754-4C 1/4 3/8S3754-4D 1/4 1/2S3754-5A 5/16 1/8S3754-5B 5/16 1/4S3754-5C 5/16 3/8S3754-6A 3/8 1/8S3754-6B 3/8 1/4S3754-6C 3/8 3/8S3754-6D 3/8 1/2S3754-6E 3/8 3/4S3754-8B 1/2 1/4S3754-8C 1/2 3/8S3754-8D 1/2 1/2S3754-8E 1/2 3/4S3754-10B 5/8 1/4S3754-10C 5/8 3/8S3754-10D 5/8 1/2S3754-10E 5/8 3/4S3754-12D 3/4 1/2S3754-12E 3/4 3/4S3754-12H 3/4 1S3754-14E 7/8 3/4S3754-16D 1 1/2S3754-16E 1 3/4S3754-16H 1 1S3754-16J 1 1-1/4S3754-20H 1-1/4 1S3754-20J 1-1/4 1-1/4S3754-20K 1-1/4 1-1/2S3754-24K 1-1/2 1-1/2S3754-32M 2 2

90° ELBOWMale JIC To Male

JIC

PART No. Tube TubeS3755-2 1/8 1/8S3755-3 3/16 3/16S3755-4 1/4 1/4S3755-5 5/16 5/16S3755-6 3/8 3/8S3755-64 3/8 1/4S3755-8 1/2 1/2S3755-86 1/2 3/8S3755-10 5/8 5/8S3755-108 5/8 1/2S3755-12 3/4 3/4S3755-128 3/4 1/2S3755-1210 3/4 5/8S3755-14 7/8 7/8S3755-16 1 1S3755-1612 1 3/4S3755-20 1-1/4 1-1/4S3755-24 1-1/2 1-1/2S3755-32 2 2

45° ELBOWMale JIC ToFemale Pipe

PART No. Tube PipeS3754F-4B 1/4 1/4S3754F-6B 3/8 1/4S3754F-6C 3/8 3/8S3754F-8C 1/2 3/8S3754F-8D 1/2 1/2S3754F-10D 5/8 1/2S3754F-12E 3/4 3/4S3754F-16H 1 1

45° ELBOWMale JIC To

Male JIC

PART No. Tube TubeS3705-4 1/4 1/4S3705-46 1/4 3/8S3705-6 3/8 3/8S3705-8 1/2 1/2S3705-10 5/8 5/8S3705-12 3/4 3/4S3705-16 1 1

90° ELBOWMale JIC ToFemale Pipe

PART No. Tube PipeS3750-2A 1/8 1/8S3750-3A 3/16 1/8S3750-4A 1/4 1/8S3750-4B 1/4 1/4S3750-4C 1/4 3/8S3750-4D 1/4 1/2S3750-5A 5/16 1/8S3750-5B 5/16 1/4S3750-6A 3/8 1/8S3750-6B 3/8 1/4S3750-6C 3/8 3/8S3750-6D 3/8 1/2S3750-8B 1/2 1/4S3750-8C 1/2 3/8S3750-8D 1/2 1/2S3750-8E 1/2 3/4S3750-10C 5/8 3/8S3750-10D 5/8 1/2S3750-12D 3/4 1/2S3750-12E 3/4 3/4S3750-12H 3/4 1S3750-14E 7/8 3/4S3750-16E 1 3/4S3750-16H 1 1S3750-20J 1-1/4 1-1/4S3750-24K 1-1/2 1-1/2S3750-32M 2 2

90° ELBOW(EXTRA-EXTRALONG STYLE)

Male JIC ToMale Pipe

PART No. Tube PipeS3749EEL-4A 1/4 1/8S3749EEL-4B 1/4 1/4S3749EEL-5A 5/16 1/8S3749EEL-6B 3/8 1/4S3749EEL-6C 3/8 3/8S3749EEL-8C 1/2 3/8S3749EEL-8D 1/2 1/2S3749EEL-10D 5/8 1/2S3749EEL-12E 3/4 3/4S3749EEL-16H 1 1S3749EEL-20J 1-1/4 1-1/4

90° ELBOWMale JIC To

SwivelMale Pipe

PART No. Tube PipeS3749SW-6B 3/8 1/4S3749SW-6C 3/8 3/8S3749SW-8C 1/2 3/8S3749SW-8D 1/2 1/2S3749SW-10D 5/8 1/2S3749SW-12E 3/4 3/4

C

50.

TEEFemale Pipe ToFemale Pipe To

Male JIC

PART No. Tube Pipe S3744F-4A 1/4 1/8S3744F-6B 3/8 1/4S3744F-8C 1/2 3/8

TEEMale JIC To

Female Pipe ToMale Pipe

PART No. Tube PipeS3745F-4A 1/4 1/8S3745F-8C 1/2 3/8S3745F-12E 3/4 3/4

TEEMale JIC ToMale Pipe To

Male Pipe

PART No. Tube PipeS3745M-4A 1/4 1/8S3745M-10D 5/8 1/2S3745M-12E 3/4 3/4

TEEMale JIC ToMale Pipe To

Tube

PART No. Tube PipeS3751-3A 3/16 1/8S3751-4A 1/4 1/8S3751-4B 1/4 1/4S3751-5A 5/16 1/8S3751-5B 5/16 1/4S3751-6A 3/8 1/8S3751-6B 3/8 1/4S3751-6C 3/8 3/8S3751-6D 3/8 1/2S3751-8B 1/2 1/4S3751-8C 1/2 3/8S3751-8D 1/2 1/2S3751-8E 1/2 3/4S3751-10D 5/8 1/2S3751-10E 5/8 3/4S3751-12D 3/4 1/2S3751-12E 3/4 3/4S3751-14E 7/8 3/4S3751-16E 1 3/4S3751-16H 1 1S3751-20J 1-1/4 1-1/4S3751-24K 1-1/2 1-1/2S3751-32M 2 2

TEEMale JIC ToMale JIC ToMale Pipe

PART No. Tube PipeS3745-3A 3/16 1/8S3745-4A 1/4 1/8S3745-4B 1/4 1/4S3745-4C 1/4 3/8S3745-5A 5/16 1/8S3745-5B 5/16 1/4S3745-6A 3/8 1/8S3745-6B 3/8 1/4S3745-6C 3/8 3/8S3745-6D 3/8 1/2S3745-8C 1/2 3/8S3745-8D 1/2 1/2S3745-8E 1/2 3/4S3745-10C 5/8 3/8S3745-10D 5/8 1/2S3745-10E 5/8 3/4S3745-12D 3/4 1/2S3745-12E 3/4 3/4S3745-14E 7/8 3/4S3745-16E 1 3/4S3745-16H 1 1S3745-20J 1-1/4 1-1/4S3745-24K 1-1/2 1-1/2S3745-32M 2 2

PART No. Tube TubeS3744-2 1/8 1/8S3744-3 3/16 3/16S3744-4 1/4 1/4S3744-46 1/4 3/8S3744-5 5/16 5/16S3744-6 3/8 3/8S3744-64 3/8 1/4S3744-68 3/8 1/2S3744-8 1/2 1/2S3744-86 1/2 3/8S3744-810 1/2 5/8S3744-812 1/2 3/4S3744-10 5/8 5/8S3744-108 5/8 1/2S3744-1012 5/8 3/4S3744-12 3/4 3/4S3744-126 3/4 3/8S3744-128 3/4 1/2S3744-1210 3/4 5/8S3744-1216 3/4 1S3744-14 7/8 7/8S3744-16 1 1S3744-1612 1 3/4S3744-20 1-1/4 1-1/4S3744-2016 1-1/4 1S3744-24 1-1/2 1-1/2S3744-32 2 2

TEEMale JIC To

Female Pipe ToFemale Pipe

PART No. Tube PipeS3737F-4A 1/4 1/8S3737F-6B 3/8 1/4S3737F-10D 5/8 1/2

TEEMale JIC ToFemale Pipe

To Tube

PART No. Tube PipeS3737-3A 3/16 1/8S3737-4A 1/4 1/8S3737-4B 1/4 1/4S3737-5A 5/16 1/8S3737-6B 3/8 1/4S3737-6C 3/8 3/8S3737-8C 1/2 3/8S3737-8D 1/2 1/2S3737-10D 5/8 1/2S3737-12E 3/4 3/4S3737-14E 7/8 3/4S3737-16H 1 1S3737-20J 1-1/4 1-1/4S3737-24K 1-1/2 1-1/2

TEEMale JICAll Ends

TEEMale Pipe To

Female Pipe ToMale JIC

PART No. Tube PipeS3753-10D 5/8 1/2S3753-12E 3/4 3/4

CROSSMale JICAll Ends

PART No. TubeS3752-4 1/4S3752-5 5/16S3752-6 3/8S3752-8 1/2S3752-10 5/8S3752-12 3/4S3752-14 7/8S3752-16 1S3752-20 1-1/4S3752-24 1-1/2


C

51.

SPLIT FLANGEADAPTER

Male JIC To Split Flange

Split PART No. Tube FlangeS3700BT-88 1/2 1/2S3700BT-812 1/2 3/4S3700BT-1212 3/4 3/4S3700BT-1216 3/4 1S3700BT-1220 3/4 1-1/4S3700BT-1612 1 3/4S3700BT-1616 1 1S3700BT-1620 1 1-1/4S3700BT-1624 1 1-1/2S3700BT-2016 1-1/4 1S3700BT-2020 1-1/4 1-1/4S3700BT-2024 1-1/4 1-1/2S3700BT-2032 1-1/4 2S3700BT-2420 1-1/2 1-1/4S3700BT-2424 1-1/2 1-1/2S3700BT-2432 1-1/2 2S3700BT-3224 2 1-1/2S3700BT-3232 2 2

90° ELBOWSPLIT FLANGE




Split PART No. Tube FlangeS3790BT-88 1/2 1/2S3790BT-812 1/2 3/4S3790BT-1212 3/4 3/4S3790BT-1216 3/4 1S3790BT-1220 3/4 1-1/4S3790BT-1612 1 3/4S3790BT-1616 1 1S3790BT-1620 1 1-1/4S3790BT-1624 1 1-1/2S3790BT-2012 1-1/4 3/4S3790BT-2016 1-1/4 1S3790BT-2020 1-1/4 1-1/4S3790BT-2024 1-1/4 1-1/2S3790BT-2032 1-1/4 2S3790BT-2416 1-1/2 1S3790BT-2420 1-1/2 1-1/4S3790BT-2424 1-1/2 1-1/2S3790BT-2432 1-1/2 2S3790BT-3224 2 1-1/2S3790BT-3232 2 2

Split PART No. Tube FlangeS3740BT-88 1/2 1/2S3740BT-812 1/2 3/4S3740BT-1212 3/4 3/4S3740BT-1216 3/4 1S3740BT-1220 3/4 1-1/4S3740BT-1612 1 3/4S3740BT-1616 1 1S3740BT-1620 1 1-1/4S3740BT-1624 1 1-1/2S3740BT-2012 1-1/4 3/4S3740BT-2016 1-1/4 1S3740BT-2020 1-1/4 1-1/4S3740BT-2024 1-1/4 1-1/2S3740BT-2420 1-1/2 1-1/4S3740BT-2424 1-1/2 1-1/2S3740BT-3232 2 2

SPLIT FLANGEADAPTER


Split PART No. Tube FlangeS3700BT62-1212 3/4 3/4S3700BT62-1216 3/4 1S3700BT62-1612 1 3/4S3700BT62-1616 1 1S3700BT62-1620 1 1-1/4S3700BT62-1624 1 1-1/2S3700BT62-2016 1-1/4 1S3700BT62-2020 1-1/4 1-1/4S3700BT62-2024 1-1/4 1-1/2S3700BT62-2420 1-1/2 1-1/4S3700BT62-2424 1-1/2 1-1/2S3700BT62-3232 2 2





Split PART No. Tube FlangeS3790BT62-1212 3/4 3/4S3790BT62-1216 3/4 1S3790BT62-1220 3/4 1-1/4S3790BT62-1612 1 3/4S3790BT62-1616 1 1S3790BT62-1620 1 1-1/4S3790BT62-1624 1 1-1/2S3790BT62-2016 1-1/4 1S3790BT62-2020 1-1/4 1-1/4S3790BT62-2024 1-1/4 1-1/2S3790BT62-2416 1-1/2 1S3790BT62-2420 1-1/2 1-1/4S3790BT62-2424 1-1/2 1-1/2S3790BT62-2432 1-1/2 2S3790BT62-3232 2 2

Split PART No. Tube FlangeS3740BT62-1212 3/4 3/4S3740BT62-1216 3/4 1S3740BT62-1220 3/4 1-1/4S3740BT62-1612 1 3/4S3740BT62-1616 1 1S3740BT62-1620 1 1-1/4S3740BT62-1624 1 1-1/2S3740BT62-2012 1-1/4 3/4S3740BT62-2016 1-1/4 1S3740BT62-2020 1-1/4 1-1/4S3740BT62-2024 1-1/4 1-1/2S3740BT62-2420 1-1/2 1-1/4S3740BT62-2424 1-1/2 1-1/2S3740BT62-3232 2 2

FLANGE ADAPTERS CODE 61(MAXIMUM WORKING PRESSURE 3000 PSI)

FLANGE ADAPTERS CODE 62(MAXIMUM WORKING PRESSURE 6000 PSI)

C

52.

FLANGE PAD KIT Code 61

Pipe Weld

PadPART No. Pipe SizeSFPKW61-8 1/2 1/2SFPKW61-12 3/4 3/4SFPKW61-16 1 1SFPKW61-20 1-1/4 1-1/4SFPKW61-24 1-1/2 1-1/2SFPKW61-32 2 2


Pipe Weld

PadPART No. Pipe SizeSFPKW62-8 1/2 1/2SFPKW62-12 3/4 3/4SFPKW62-16 1 1SFPKW62-20 1-1/4 1-1/4SFPKW62-24 1-1/2 1-1/2SFPKW62-32 2 2


Female Pipe

PadPART No. Pipe SizeSFPK2661-8D 1/2 1/2SFPK2661-12E 3/4 3/4SFPK2661-16H 1 1SFPK2661-20J 1-1/4 1-1/4SFPK2661-24K 1-1/2 1-1/2SFPK2661-32M 2 2


Female Pipe

PadPART No. Pipe SizeSFPK2662-8D 1/2 1/2SFPK2662-12E 3/4 3/4SFPK2662-16H 1 1SFPK2662-20J 1-1/4 1-1/4SFPK2662-24K 1-1/2 1-1/2SFPK2662-32M 2 2


Female O-Ring

PadPART No. O-Ring SizeSFPK3461-88 3/4-16 1/2SFPK3461-1212 1-1/16 - 12 3/4SFPK3461-1616 1-5/16 - 12 1SFPK3461-2020 1-5/8-12 1-1/4SFPK3461-2424 1-7/8-12 1-1/2SFPK3461-3232 2-1/2 - 12 2


Female O-Ring

PadPART No. O-Ring SizeSFPK3462-88 3/4-16 1/2SFPK3462-1212 1-1/16 - 12 3/4SFPK3462-1616 1-5/16 - 12 1SFPK3462-2020 1-5/8-12 1-1/4SFPK3462-2424 1-7/8-12 1-1/2SFPK3462-3232 2-1/2 - 12 2

HALVES KIT Code 61

Split Flange

Flange HeadPART No. Size SizeSFK61-8 1/2 1.19SFK61-12 3/4 1.50SFK61-16 1 1.75SFK61-20 1-1/4 2.00SFK61-24 1-1/2 2.38SFK61-32 2 2.81

HALVES KIT Code 62

Split Flange

Flange HeadPART No. Size SizeSFK62-12 3/4 1.63SFK62-16 1 1.88SFK62-20 1-1/4 2.12SFK62-24 1-1/2 2.50SFK62-32 2 3.12

BUNA-NSPLIT

FLANGEO-Ring

FlangePART No. Size Dia.SFO-8 1/2 .734SFO-12 3/4 .984SFO-16 1 1.296SFO-20 1-1/4 1.484SFO-24 1-1/2 1.859SFO-32 2 2.234

** Includes Bolts, Lock Washersand O-Ring.








FLANGE KITS(CODE 61 MAXIMUM WORKING PRESSURE 3000 PSI)(CODE 62 MAXIMUM WORKING PRESSURE 6000 PSI)

C

53.

NOTE: BULKHEADS COME

COMPLETEWITH LOCKNUTS

BULKHEADUNION

Male JIC ToMale JIC

PART No. TubeS3842-3 3/16 S3842-4 1/4 S3842-5 5/16 S3842-6 3/8 S3842-8 1/2 S3842-10 5/8 S3842-12 3/4 S3842-14 7/8 S3842-16 1 S3842-20 1-1/4 S3842-24 1-1/2 S3842-32 2

90° BULKHEADELBOW

Tube To Tube

PART No. TubeS3855-3 3/16 S3855-4 1/4 S3855-5 5/16 S3855-6 3/8 S3855-8 1/2 S3855-10 5/8 S3855-12 3/4 S3855-16 1 S3855-20 1-1/4 S3855-24 1-1/2

45° BULKHEADELBOW

Tube To Tube

PART No. TubeS3854-3 3/16S3854-4 1/4S3854-5 5/16S3854-6 3/8S3854-8 1/2S3854-10 5/8S3854-12 3/4S3854-16 1S3854-20 1-1/4

BULKHEADTEE

Tube All Ends

PART No. TubeS3845-3 3/16 S3845-4 1/4 S3845-5 5/16 S3845-6 3/8 S3845-8 1/2 S3845-10 5/8 S3845-12 3/4 S3845-16 1 S3845-20 1-1/4

BULKHEADTEE

Tube All Ends

PART No. TubeS3851-3 3/16S3851-4 1/4S3851-5 5/16S3851-6 3/8S3851-8 1/2S3851-10 5/8S3851-12 3/4S3851-16 1S3851-20 1-1/4

BULKHEADLOCKNUT

PART No. TubeS3831N-3 3/16S3831N-4 1/4S3831N-5 5/16S3831N-6 3/8S3831N-8 1/2S3831N-10 5/8S3831N-12 3/4S3831N-14 7/8S3831N-16 1S3831N-20 1-1/4S3831N-24 1-1/2S3831N-32 2

BULKHEADCONNECTORTube To Pipe

PART No. Tube PipeS3848-4A 1/4 1/8 S3848-4B 1/4 1/4 S3848-6B 3/8 1/4 S3848-6C 3/8 3/8 S3848-8C 1/2 3/8 S3848-8D 1/2 1/2 S3848-10D 5/8 1/2 S3848-12E 3/4 3/4 S3848-16H 1 1 S3848-20J 1-1/4 1-1/4 S3848-24K 1-1/2 1-1/2

STEEL 37° S.A.E. FLARE BULKHEAD ADAPTERS

BULKHEADCONNECTOR

Tube ToFemale Pipe

PART No. Tube PipeS3846-4A 1/4 1/8 S3846-4B 1/4 1/4 S3846-6B 3/8 1/4 S3846-6C 3/8 3/8 S3846-8C 1/2 3/8 S3846-8D 1/2 1/2 S3846-10D 5/8 1/2 S3846-12E 3/4 3/4 S3846-16H 1 1 S3846-20J 1-1/4 1-1/4 S3846-24K 1-1/2 1-1/2

C

54.

CONNECTORMale O-Ring To

Female Pipe

PART No. O-Ring PipeS3620-2A 5/16 - 24 1/8S3620-2B 5/16 - 24 1/4S3620-3B 3/8 - 24 1/4S3620-4A 7/16 - 20 1/8S3620-4B 7/16 - 20 1/4S3620-4C 7/16 - 20 3/8S3620-5A 1/2 - 20 1/8S3620-5B 1/2 - 20 1/4S3620-6A 9/16 - 18 1/8S3620-6B 9/16 - 18 1/4S3620-6C 9/16 - 18 3/8S3620-6D 9/16 - 18 1/2S3620-8B 3/4 - 16 1/4S3620-8C 3/4 - 16 3/8S3620-8D 3/4 - 16 1/2S3620-8E 3/4 - 16 3/4S3620-10B 7/8 - 14 1/4S3620-10C 7/8 - 14 3/8S3620-10D 7/8 - 14 1/2S3620-10E 7/8 - 14 3/4S3620-12B 1-1/16 - 12 1/4S3620-12C 1-1/16 - 12 3/8S3620-12D 1-1/16 - 12 1/2S3620-12E 1-1/16 - 12 3/4S3620-12H 1-1/16 - 12 1S3620-14D 1-3/16 - 12 1/2S3620-14E 1-3/16 - 12 3/4S3620-14H 1-3/16 - 12 1S3620-16C 1-5/16 - 12 3/8S3620-16D 1-5/16 - 12 1/2S3620-16E 1-5/16 - 12 3/4S3620-16H 1-5/16 - 12 1S3620-16J 1-5/16 - 12 1-1/4S3620-20E 1-5/8 - 12 3/4S3620-20H 1-5/8 - 12 1S3620-20J 1-5/8 - 12 1-1/4S3620-20K 1-5/8 - 12 1-1/2S3620-24E 1-7/8 - 12 3/4S3620-24H 1-7/8 - 12 1S3620-24J 1-7/8 - 12 1-1/4S3620-24K 1-7/8 - 12 1-1/2S3620-32K 2-1/2 - 12 1-1/2S3620-32M 2-1/2 - 12 2

CONNECTORMale O-Ring To

Male Pipe

PART No. O-Ring PipeS3622-4A 7/16 - 20 1/8S3622-4B 7/16 - 20 1/4S3622-5A 1/2 - 20 1/8S3622-5B 1/2 - 20 1/4S3622-6A 9/16 - 18 1/8S3622-6B 9/16 - 18 1/4S3622-6C 9/16 - 18 3/8S3622-6D 9/16 - 18 1/2S3622-8B 3/4 - 16 1/4S3622-8C 3/4 - 16 3/8S3622-8D 3/4 - 16 1/2S3622-8E 3/4 - 16 3/4S3622-10B 7/8 - 14 1/4S3622-10C 7/8 - 14 3/8S3622-10D 7/8 - 14 1/2S3622-10E 7/8 - 14 3/4S3622-12C 1-1/16 - 12 3/8S3622-12D 1-1/16 - 12 1/2S3622-12E 1-1/16 - 12 3/4S3622-12H 1-1/16 - 12 1S3622-14E 1-3/16 - 12 3/4S3622-16E 1-5/16 - 12 3/4S3622-16H 1-5/16 - 12 1S3622-20J 1-5/8 - 12 1-1/4S3622-24H 1-7/8 - 12 1S3622-24K 1-7/8 - 12 1-1/2S3622-32M 2-1/2 - 12 2

CONNECTORFemale O-RingTo Male Pipe

PART No. O-Ring PipeS3622F-4A 7/16 - 20 1/8S3622F-4B 7/16 - 20 1/4S3622F-5A 1/2 - 20 1/8S3622F-6B 9/16 - 18 1/4S3622F-6C 9/16 - 18 3/8S3622F-6D 9/16 - 18 1/2S3622F-8B 3/4 - 16 1/4S3622F-8C 3/4 - 16 3/8S3622F-8D 3/4 - 16 1/2S3622F-8E 3/4 - 16 3/4S3622F-10C 7/8 - 14 3/8S3622F-10D 7/8 - 14 1/2S3622F-10E 7/8 - 14 3/4S3622F-12E 1-1/16 - 12 3/4S3622F-16H 1-5/16 - 12 1S3622F-16J 1-5/16 - 12 1-1/4S3622F-20J 1-5/8 - 12 1-1/4S3622F-24K 1-7/8 - 12 1-1/2

CONNECTORMale O-Ring ToFemale O-Ring

PART No. Male FemaleS3623-4 7/16 - 20 7/16 - 20S3623-46 7/16 - 20 9/16 - 18S3623-54 1/2 - 20 7/16 - 20S3623-6 9/16 - 18 9/16 - 18S3623-64 9/16 - 18 7/16 - 20S3623-68 9/16 - 18 3/4 - 16S3623-8 3/4 - 16 3/4 - 16S3623-84 3/4 - 16 7/16 - 20S3623-86 3/4 - 16 9/16 - 18S3623-810 3/4 - 16 7/8 - 14S3623-812 3/4 - 16 1-1/16 - 12S3623-108 7/8 - 14 3/4 - 16S3623-12 1-1/16 - 12 1-1/16 - 12S3623-124 1-1/16 - 12 7/16 - 20S3623-126 1-1/16 - 12 9/16 - 18S3623-128 1-1/16 - 12 3/4 - 16S3623-1210 1-1/16 - 12 7/8 - 14S3623-1216 1-1/16 - 12 1-5/16 - 12S3623-148 1-3/16 - 12 3/4 - 16S3623-1410 1-3/16 - 12 7/8 - 14S3623-1412 1-3/16 - 12 1-1/16 - 12S3623-1416 1-3/16 - 12 1-5/16 - 12S3623-16 1-5/16 - 12 1-5/16 - 12S3623-168 1-5/16 - 12 3/4 - 16S3623-1610 1-5/16 - 12 7/8 - 14S3623-1612 1-5/16 - 12 1-1/16 - 12S3623-1614 1-5/16 - 12 1-3/16 - 12S3623-1620 1-5/16 - 12 1-5/8 - 12S3623-2010 1-5/8 - 12 7/8 - 14S3623-2012 1-5/8 - 12 1-1/16 - 12S3623-2016 1-5/8 - 12 1-5/16 - 12S3623-2024 1-5/8 - 12 1-7/8 - 12S3623-2412 1-7/8 - 12 1-1/16 - 12S3623-2416 1-7/8 - 12 1-5/16 - 12S3623-2420 1-7/8 - 12 1-5/8 - 12S3623-3220 2-1/2 - 12 1-5/8 - 12S3623-3224 2-1/2 - 12 1-7/8 - 12

CONNECTORTube To

Male O-Ring

PART No. Tube O-RingS3648-2 1/8 5/16 - 24S3648-3 3/16 3/8 - 24S3648-4 1/4 7/16 - 20S3648-42 1/4 5/16 - 24S3648-43 1/4 3/8 - 24S3648-45 1/4 1/2 - 20S3648-46 1/4 9/16 - 18S3648-48 1/4 3/4 - 16S3648-410 1/4 7/8 - 14S3648-412 1/4 1-1/16 - 12S3648-5 5/16 1/2 - 20S3648-54 5/16 7/16 - 20S3648-56 5/16 9/16 - 18S3648-58 5/16 3/4 - 16S3648-510 5/16 7/8 - 14S3648-6 3/8 9/16 - 18S3648-64 3/8 7/16 - 20S3648-65 3/8 1/2 - 20S3648-68 3/8 3/4 - 16S3648-610 3/8 7/8 - 14S3648-612 3/8 1-1/16 - 12S3648-616 3/8 1-5/16 - 12S3648-8 1/2 3/4 - 16S3648-84 1/2 7/16 - 20S3648-85 1/2 1/2 - 20S3648-86 1/2 9/16 - 18S3648-810 1/2 7/8 - 14S3648-812 1/2 1-1/16 - 12S3648-816 1/2 1-5/16 - 12S3648-10 5/8 7/8 - 14S3648-106 5/8 9/16 - 18S3648-108 5/8 3/4 - 16S3648-1012 5/8 1-1/16 - 12S3648-1014 5/8 1-3/16 - 12S3648-1016 5/8 1-5/16 - 12S3648-1020 5/8 1-5/8 - 12S3648-12 3/4 1-1/16 - 12S3648-126 3/4 9/16 - 18S3648-128 3/4 3/4 - 16S3648-1210 3/4 7/8 - 14S3648-1214 3/4 1-3/16 - 12S3648-1216 3/4 1-5/16 - 12S3648-1220 3/4 1-5/8 - 12S3648-1224 3/4 1-7/8 - 12S3648-14 7/8 1-3/16 - 12S3648-1412 7/8 1-1/16 - 12S3648-1416 7/8 1-5/16 - 12S3648-16 1 1-5/16 - 12S3648-168 1 3/4 - 16S3648-1610 1 7/8 - 14S3648-1612 1 1-1/16 - 12S3648-1614 1 1-3/16 - 12S3648-1620 1 1-5/8 - 12S3648-1624 1 1-7/8 - 12S3648-20 1-1/4 1-5/8 - 12S3648-2012 1-1/4 1-1/16 - 12S3648-2016 1-1/4 1-5/16 - 12S3648-2024 1-1/4 1-7/8 - 12S3648-24 1-1/2 1-7/8 - 12S3648-2420 1-1/2 1-5/8 - 12S3648-2432 1-1/2 2-1/2 - 12S3648-32 2 2-1/2 - 12S3648-3224 2 1-7/8 - 12

STEEL S.A.E. O-RING BOSS ADAPTERS(BUNA-N O-RING STANDARD)

C

55.

90° ELBOWMale O-Ring To

Female Pipe

PART No. O-Ring PipeS3616-4A 7/16 - 20 1/8S3616-4B 7/16 - 20 1/4S3616-5A 1/2 - 20 1/8S3616-6B 9/16 - 18 1/4S3616-6C 9/16 - 18 3/8S3616-8C 3/4 - 16 3/8S3616-8D 3/4 - 16 1/2S3616-10D 7/8 - 14 1/2S3616-12D 1-1/16 - 12 1/2S3616-12E 1-1/16 - 12 3/4S3616-14E 1-3/16 - 12 3/4S3616-16E 1-5/16 - 12 3/4S3616-16H 1-5/16 - 12 1S3616-20J 1-5/8 - 12 1-1/4S3616-24K 1-7/8 - 12 1-1/2S3616-32M 2-1/2 - 12 2

90° ELBOWTube To

Male O-Ring

PART No. Tube O-RingS3649-2 1/8 5/16 - 24S3649-3 3/16 3/8 - 24S3649-4 1/4 7/16 - 20S3649-42 1/4 5/16 - 24S3649-45 1/4 1/2 - 20S3649-46 1/4 9/16 - 18S3649-48 1/4 3/4 - 16S3649-5 5/16 1/2 - 20S3649-54 5/16 7/16 - 20S3649-56 5/16 9/16 - 18S3649-58 5/16 3/4 - 16S3649-6 3/8 9/16 - 18S3649-64 3/8 7/16 - 20S3649-65 3/8 1/2 - 20S3649-68 3/8 3/4 - 16S3649-610 3/8 7/8 - 14S3649-612 3/8 1-1/16 - 12S3649-8 1/2 3/4 - 16S3649-84 1/2 7/16 - 20S3649-86 1/2 9/16 - 18S3649-810 1/2 7/8 - 14S3649-812 1/2 1-1/16 - 12S3649-816 1/2 1-5/16 - 12S3649-10 5/8 7/8 - 14S3649-106 5/8 9/16 - 18S3649-108 5/8 3/4 - 16S3649-1012 5/8 1-1/16 - 12S3649-1016 5/8 1-5/16 - 12S3649-12 3/4 1-1/16 - 12S3649-126 3/4 9/16 - 18S3649-128 3/4 3/4 - 16S3649-1210 3/4 7/8 - 14S3649-1214 3/4 1-3/16 - 12S3649-1216 3/4 1-5/16 - 12S3649-1220 3/4 1-5/8 - 12S3649-14 7/8 1-3/16 - 12S3649-16 1 1-5/16 - 12S3649-168 1 3/4 - 16S3649-1610 1 7/8 - 14S3649-1612 1 1-1/16 - 12S3649-1614 1 1-3/16 - 12S3649-1620 1 1-5/8 - 12S3649-20 1-1/4 1-5/8 - 12S3649-2012 1-1/4 1-1/16 - 12S3649-2016 1-1/4 1-5/16 - 12S3649-2024 1-1/4 1-7/8 - 12S3649-24 1-1/2 1-7/8 - 12S3649-2416 1-1/2 1-5/16 - 12S3649-2420 1-1/2 1-5/8 - 12S3649-32 2 2-1/2 - 12S3649-3224 2 1-7/8 - 12


Tube ToMale O-Ring

PART No. Tube O-RingS3649L-4 1/4 7/16 - 20S3649L-6 3/8 9/16 - 18S3649L-68 3/8 3/4 - 16S3649L-8 1/2 3/4 - 16S3649L-810 1/2 7/8 - 14S3649L-10 5/8 7/8 - 14S3649L-12 3/4 1-1/16 - 12S3649L-16 1 1-5/16 - 12


BUNA-NO-RING

PART No. O-Ring Dia.S3631R-2 1/8 .239S3631R-3 3/16 .301S3631R-4 1/4 .351S3631R-5 5/16 .414S3631R-6 3/8 .468S3631R-8 1/2 .644S3631R-10 5/8 .755S3631R-12 3/4 .924S3631R-14 7/8 1.048S3631R-16 1 1.171S3631R-20 1-1/4 1.475S3631R-24 1-1/2 1.720S3631R-32 2 2.337

VITONO-RING

PART No. O-Ring Dia.S3631VO-2 1/8 .239S3631VO-3 3/16 .301S3631VO-4 1/4 .351S3631VO-5 5/16 .414S3631VO-6 3/8 .468S3631VO-8 1/2 .644S3631VO-10 5/8 .755S3631VO-12 3/4 .924S3631VO-14 7/8 1.048S3631VO-16 1 1.171S3631VO-20 1-1/4 1.475S3631VO-24 1-1/2 1.720S3631VO-32 2 2.337

PLUGCounter Sunk

Hex

PART No. O-RingS3618-2 5/16 - 24S3618-3 3/8 - 24S3618-4 7/16 - 20S3618-5 1/2 - 20S3618-6 9/16 - 18S3618-8 3/4 - 16S3618-10 7/8 - 14S3618-12 1-1/16 - 12S3618-14 1-3/16 - 12S3618-16 1-5/16 - 12S3618-20 1-5/8 - 12S3618-24 1-7/8 - 12S3618-32 2-1/2 - 12

PLUGHex

Head

PART No. O-RingS3621-2 5/16 - 24S3621-3 3/8 - 24S3621-4 7/16 - 20S3621-5 1/2 - 20S3621-6 9/16 - 18S3621-8 3/4 - 16S3621-10 7/8 - 14S3621-12 1-1/16 - 12S3621-14 1-3/16 - 12S3621-16 1-5/16 - 12S3621-20 1-5/8 - 12S3621-24 1-7/8 - 12S3621-32 2-1/2 - 12

AdjustableO-Ring

Lock Nut

PART No. O-RingS3631N-4 7/16 - 20S3631N-5 1/2 - 20S3631N-6 9/16 - 18S3631N-8 3/4 - 16S3631N-10 7/8 - 14S3631N-12 1-1/16 - 12S3631N-14 1-3/16 - 12S3631N-16 1-5/16 - 12

CONNECTOR(LONG STYLE)

Tube ToMale O-Ring

PART No. Tube O-RingS3648L-4 1/4 7/16 - 20S3648L-5 5/16 1/2 - 20S3648L-6 3/8 9/16 - 18S3648L-68 3/8 3/4 - 16S3648L-8 1/2 3/4 - 16S3648L-10 5/8 7/8 - 14S3648L-12 3/4 1-1/16 - 12S3648L-14 7/8 1-3/16 - 12S3648L-16 1 1-5/16 - 12S3648L-20 1-1/4 1-5/8 - 12S3648L-24 1-1/2 1-7/8 - 12

UNIONMale O-Ring To

Male O-Ring

PART No. O-RingS3642-4 7/16 - 20S3642-6 9/16 - 18S3642-8 3/4 - 16S3642-10 7/8 - 14S3642-12 1-1/16 - 12S3642-16 1-5/16 - 12S3642-20 1-5/8 - 12

C

56.

45° ELBOWTube To

Male O-Ring

PART No. Tube O-RingS3654-4 1/4 7/16 - 20S3654-45 1/4 1/2 - 20S3654-46 1/4 9/16 - 18S3654-48 1/4 3/4 - 16S3654-5 5/16 1/2 - 20S3654-54 5/16 7/16 - 20S3654-56 5/16 9/16 - 18S3654-6 3/8 9/16 - 18S3654-68 3/8 3/4 - 16S3654-610 3/8 7/8 - 14S3654-8 1/2 3/4 - 16S3654-86 1/2 9/16 - 18S3654-810 1/2 7/8 - 14S3654-812 1/2 1-1/16 - 12S3654-10 5/8 7/8 - 14S3654-108 5/8 3/4 - 16S3654-1012 5/8 1-1/16 - 12S3654-12 3/4 1-1/16 - 12S3654-128 3/4 3/4 - 16S3654-1210 3/4 7/8 - 14S3654-1216 3/4 1-5/16 - 12S3654-14 7/8 1-3/16 - 12S3654-16 1 1-5/16 - 12S3654-1612 1 1-1/16 - 12S3654-1620 1 1-5/8 - 12S3654-20 1-1/4 1-5/8 - 12S3654-2016 1-1/4 1-5/16 - 12S3654-24 1-1/2 1-7/8 - 12S3654-32 2 2-1/2 - 12

90° ELBOW(EXTRA LONG

STYLE)Tube To

Male O-Ring

PART No. Tube O-RingS3649EL-4 1/4 7/16 - 20S3649EL-6 3/8 9/16 - 18S3649EL-68 3/8 3/4 - 16S3649EL-8 1/2 3/4 - 16S3649EL-810 1/2 7/8 - 14S3649EL-10 5/8 7/8 - 14S3649EL-108 5/8 3/4 - 16S3649EL-12 3/4 1-1/16 - 12S3649EL-16 1 1-5/16 - 12S3649EL-1612 1 1-1/16 - 12S3649EL-20 1-1/4 1-5/8 - 12



Male Pipe

PART No. O-Ring PipeS3699-4A 7/16 - 20 1/8S3699-4B 7/16 - 20 1/4S3699-5A 1/2 - 20 1/8S3699-6B 9/16 - 18 1/4S3699-6C 9/16 - 18 3/8S3699-8C 3/4 - 16 3/8S3699-8D 3/4 - 16 1/2S3699-10D 7/8 - 14 1/2S3699-12E 1-1/16 - 12 3/4S3699-14E 1-3/16 - 12 3/4S3699-16E 1-5/16 - 12 3/4S3699-16H 1-5/16 - 12 1S3699-20J 1-5/8 - 12 1-1/4S3699-24K 1-7/8 - 12 1-1/2S3699-32M 2-1/2 - 12 2

90° ELBOW(EXTRA EXTRALONG STYLE)

Tube ToMale O-Ring

PART No. Tube O-RingS3649EEL-4 1/4 7/16 - 20S3649EEL-6 3/8 9/16 - 18S3649EEL-8 1/2 3/4 - 16


Male O-Ring

PART No. O-RingS3655-4 7/16 - 20S3655-6 9/16 - 18S3655-68 9/16 - 18 to 3/4 - 16S3655-8 3/4 - 16S3655-10 7/8 - 14S3655-12 1-1/16 - 12S3655-16 1-5/16 - 12S3655-20 1-5/8 - 12S3655-24 1-7/8 - 12

TEETube To

Male O-Ring ToTube

PART No. Tube O-RingS3651-4 1/4 7/16 - 20S3651-46 1/4 9/16 - 18S3651-5 5/16 1/2 - 20S3651-6 3/8 9/16 - 18S3651-64 3/8 7/16 - 20S3651-68 3/8 3/4 - 16S3651-8 1/2 3/4 - 16S3651-86 1/2 9/16 - 18S3651-810 1/2 7/8 - 14S3651-10 5/8 7/8 - 14S3651-108 5/8 3/4 - 16S3651-12 3/4 1-1/16 - 12S3651-1210 3/4 7/8 - 14S3651-14 7/8 1-3/16 - 12S3651-16 1 1-5/16 - 12S3651-1612 1 1-1/16 - 12S3651-20 1-1/4 1-5/8 - 12S3651-24 1-1/2 1-7/8 - 12S3651-32 2 2-1/2 - 12

TEETube To Tube To

Male O-Ring

PART No. Tube O-RingS3645-4 1/4 7/16 - 20S3645-46 1/4 9/16 - 18S3645-5 5/16 1/2 - 20S3645-6 3/8 9/16 - 18S3645-64 3/8 7/16 - 20S3645-68 3/8 3/4 - 16S3645-8 1/2 3/4 - 16S3645-86 1/2 9/16 - 18S3645-810 1/2 7/8 - 14S3645-10 5/8 7/8 - 14S3645-108 5/8 3/4 - 16S3645-1012 5/8 1-1/16 - 12S3645-12 3/4 1-1/16 - 12S3645-128 3/4 3/4 - 16S3645-1210 3/4 7/8 - 14S3645-1216 3/4 1-5/16 - 12S3645-14 7/8 1-3/16 - 12S3645-16 1 1-5/16 - 12S3645-1612 1 1-1/16 - 12S3645-20 1-1/4 1-5/8 - 12S3645-24 1-1/2 1-7/8 - 12S3645-32 2 2-1/2 - 12

C

57.

STEEL O-RING FACE SEAL ADAPTERS(BUNA-N O-RING STANDARD)

UNIONO-Ring Face

Seal To O-RingFace Seal

PART No. ORFS S3942-4 9/16 - 18S3942-6 1-1/16 - 16S3942-64 9/16 - 18S3942-8 13/16 - 16S3942-86 1-1/16 - 16S3942-10 1 - 14S3942-108 13/16 - 16S3942-12 1-3/16 - 12S3942-1210 1 - 14S3942-16 1-7/16 - 12S3942-1612 1-3/16 - 12S3942-20 1-11/16 - 12S3942-2016 1-7/16 - 12S3942-24 2 - 12

CONNECTORO-Ring Face

Seal ToMale Pipe

PART No. ORFS Pipe S3948-4A 9/16 - 18 1/8S3948-4B 9/16 - 18 1/4S3948-4C 9/16 - 18 3/8S3948-4D 9/16 - 18 1/2S3948-6A 11/16 - 16 1/8S3948-6B 11/16 - 16 1/4S3948-6C 11/16 - 16 3/8S3948-6D 11/16 - 16 1/2S3948-8B 13/16 - 16 1/4S3948-8C 13/16 - 16 3/8S3948-8D 13/16 - 16 1/2S3948-8E 13/16 - 16 3/4S3948-10D 1 - 14 1/2S3948-10E 1 - 14 3/4S3948-12D 1-3/16 - 12 1/2S3948-12E 1-3/16 - 12 3/4S3948-12H 1-3/16 - 12 1S3948-16E 1-7/16 - 12 3/4S3948-16H 1-7/16 - 12 1S3948-16J 1-7/16 - 12 1-1/4S3948-20H 1-11/16 - 12 1S3948-20J 1-11/16 - 12 1-1/4S3948-24K 2 - 12 1-1/2

PLUGO-Ring Face

Seal

PART No. ORFSS3958-4 9/16 - 18S3958-6 11/16 - 16S3958-8 13/16 - 16S3958-10 1 - 14S3958-12 1-3/16 - 12S3958-16 1-7/16 - 12S3958-20 1-11/16 - 12S3958-24 2 - 12

CONNECTOR(LONG STYLE)

O-Ring FaceSeal To MaleO-Ring Boss

PART No. ORFS O-RingS3968L-4 9/16 - 18 7/16 - 20S3968L-6 11/16 - 16 9/16 - 18S3968L-8 13/16 - 16 3/4 - 16S3968L-10 1 - 14 7/8 - 14S3968L-12 1-3/16 - 12 1-1/16 - 12S3968L-16 1-7/16 - 12 1-5/16 - 12

CONNECTORO-Ring Face

Seal ToMale JIC

PART No. ORFS Tube S3937-4 9/16 - 18 1/4S3937-6 11/16 - 16 3/8S3937-8 13/16 - 16 1/2S3937-10 1 - 14 5/8S3937-12 1-3/16 - 12 3/4S3937-16 1-7/16 - 12 1S3937-20 1-11/16 - 12 1-1/4

CONNECTORFemale

O-Ring FaceSeal To

Male JIC

FemalePART No. ORFS Tube S3937F-4 9/16 - 18 1/4S3937F-6 11/16 - 16 3/8S3937F-8 13/16 - 16 1/2S3937F-10 1 - 14 5/8S3937F-12 1-3/16 - 12 3/4S3937F-16 1-7/16 - 12 1S3937F-20 1-9/16 - 18 1-1/4

CONNECTORFemale O-RingFace Seal To Male O-Ring

Face Seal

Female MalePART No. ORFS ORFS S3935-64 11/16 - 16 9/16 - 18S3935-84 13/16 - 16 9/16 - 18S3935-86 13/16 - 16 11/16 - 16S3935-106 1 - 14 11/16 - 16S3935-108 1 - 14 13/16 - 16S3935-126 1-3/16 - 12 11/16 - 16S3935-128 1-3/16 - 12 13/16 - 16S3935-1210 1-3/16 - 12 1 - 14S3935-168 1-7/16 - 12 13/16 - 16S3935-1612 1-7/16 - 12 1-3/16 - 12S3935-2016 1 9/16 - 18 1-7/16 - 12

BULKHEADUNION

O-Ring FaceSeal To O-Ring

Face Seal

PART No. ORFS S3942BH-4 9/16 - 18S3942BH-6 11/16 - 16S3942BH-8 13/16 - 16S3942BH-10 1 - 14S3942BH-12 1-3/16 - 12S3942BH-16 1-7/16 - 12S3942BH-20 1-11/16 - 12S3942BH-24 2 - 12

CONNECTORO-Ring FaceSeal To MaleO-Ring Boss

PART No. ORFS O-RingS3968-4 9/16 - 18 7/16 - 20S3968-45 9/16 - 18 1/2 - 20S3968-46 9/16 - 18 9/16 - 18S3968-48 9/16 - 18 3/4 - 16S3968-6 11/16 - 16 9/16 - 18S3968-64 11/16 - 16 7/16 - 20S3968-68 11/16 - 16 3/4 - 16S3968-610 11/16 - 16 7/8 - 14S3968-8 13/16 - 16 3/4 - 16S3968-86 13/16 - 16 9/16 - 18S3968-810 13/16 - 16 7/8 - 14S3968-812 13/16 - 16 1-1/16 - 12S3968-10 1 - 14 7/8 - 14S3968-108 1 - 14 3/4 - 16S3968-1012 1 - 14 1-1/16 - 12S3968-12 1-3/16 - 12 1-1/16 - 12S3968-128 1-3/16 - 12 3/4 - 16S3968-1210 1-3/16 - 12 7/8 - 14S3968-1216 1-3/16 - 12 1-5/16 - 12S3968-16 1-7/16 - 12 1-5/16 - 12S3968-1612 1-7/16 - 12 1-1/16 - 12S3968-1620 1-7/16 - 12 1-5/8 - 12S3968-20 1-11/16 - 12 1-5/8 - 12S3968-2016 1-11/16 - 12 1-5/16 - 12S3968-24 2 - 12 1-7/8 - 12

C

58.

CAPO-Ring Face

Seal

PART No. ORFSS3956-4 9/16 - 18S3956-6 11/16 - 16S3956-8 13/16 - 16S3956-10 1 - 14S3956-12 1-3/16 - 12S3956-16 1-7/16 - 12S3956-20 1-11/16 - 12

90° ELBOWMale O-RingFace Seal ToMale O-Ring

Boss

Male MalePART No. ORFS O-Ring S3969-4 9/16 - 18 7/16 - 20S3969-46 9/16 - 18 9/16 - 18S3969-48 9/16 - 18 3/4 - 16S3969-6 11/16 - 16 9/16 - 18S3969-64 11/16 - 16 7/16 - 20S3969-68 11/16 - 16 3/4 - 16S3969-610 11/16 - 16 7/8 - 14S3969-612 11/16 - 16 1-1/16 - 12S3969-8 13/16 - 16 3/4 - 16S3969-86 13/16 - 16 9/16 - 18S3969-810 13/16 - 16 7/8 - 14S3969-812 13/16 - 16 1-1/16 - 12S3969-10 1 - 14 7/8 - 14S3969-108 1 - 14 3/4 - 16S3969-1012 1 - 14 1-1/16 - 12S3969-12 1-3/16 - 12 1-1/16 - 12S3969-128 1-3/16 - 12 3/4 - 16S3969-1210 1-3/16 - 12 7/8 - 14S3969-1216 1-3/16 - 12 1-5/16 - 12S3969-16 1-7/16 - 12 1-5/16 - 12S3969-1612 1-7/16 - 12 1-1/16 - 12S3969-1620 1-7/16 - 12 1-5/8 - 12S3969-20 1-11/16 - 12 1-5/8 - 12S3969-2016 1-11/16 - 12 1-5/16 - 12S3969-2024 1-11/16 - 12 1-7/8 - 12S3969-24 2 - 12 1-7/8 - 12S3969-2420 2 - 12 1-5/8 - 12

90° ELBOWMale O-RingFace Seal To

Female O-RingFace Seal

Male FemalePART No. ORFS ORFSS3947-4 9/16 - 18 9/16 - 18S3947-6 11/16 - 16 11/16 - 16S3947-8 13/16 - 16 13/16 - 16S3947-10 1 - 14 1 - 14S3947-12 1-3/16 - 12 1-3/16 - 12S3947-16 1-7/16 - 12 1-7/16 - 12S3947-20 1-11/16 - 12 1-11/16 - 12S3947-24 2 - 12 2 - 12

90° ELBOWFemale O-RingFace Seal ToO-Ring Boss

FemalePART No. ORFS O-RingS3969F-4 9/16 - 18 7/16 - 20S3969F-6 11/16 - 16 9/16 - 18S3969F-8 13/16 - 16 3/4 - 16S3969F-10 1 - 14 7/8 - 14S3949F-12 1-3/16 - 12 1-1/16 - 12S3969F-16 1-7/16 - 12 1-5/16 - 12

90° ELBOWO-Ring Face

Seal ToMale JIC

PART No. ORFS TubeS3949-4 9/16 - 18 1/4S3949-6 11/16 - 16 3/8S3949-8 13/16 - 16 1/2S3949-10 1 - 14 5/8S3949-12 1-3/16 - 12 3/4S3949-16 1-7/16 - 12 1

BUNA-NO-RING

Face Seal

PART No. ORFS DIA.S3931R-4 9/16 - 18 .301S3931R-6 11/16 - 16 .364S3931R-8 13/16 - 16 .489S3931R-10 1 - 14 .614S3931R-12 1-3/16 - 12 .739S3931R-16 1-7/16 - 12 .926S3931R-20 1-11/16 - 12 1.176S3931R-24 2 - 12 1.489



Seal ToO-Ring Face

SealPART No. ORFSS3955-4 9/16 - 18S3955-6 11/16 - 16S3955-8 13/16 - 16S3955-10 1 - 14S3955-12 1-3/16 - 12S3955-16 1-7/16 - 12S3955-20 1-11/16 - 12S3955-24 2 - 12

BULKHEAD90° ELBOWO-Ring Face

Seal ToO-Ring Face

Seal

PART No. ORFSS3955BH-4 9/16 - 18S3955BH-6 11/16 - 16S3955BH-8 13/16 - 16S3955BH-10 1 - 14S3955BH-12 1-3/16 - 12S3955BH-16 1-7/16 - 12S3955BH-20 1-11/16 - 12S3955BH-24 2 - 12


Seal ToMale Pipe

PART No. ORFS Pipe S3924-4B 9/16 - 18 1/4S3924-6B 11/16 - 16 1/4S3924-6C 11/16 - 16 3/8S3924-8D 13/16 - 16 1/2S3924-10D 1 - 14 1/2S3924-12E 1-3/16 - 12 3/4S3924-16H 1-7/16 - 12 1S3924-20J 1-11/16 - 12 1-1/4


Seal ToMale Pipe

PART No. ORFS Pipe S3999-4A 9/16 - 18 1/8S3999-4B 9/16 - 18 1/4S3999-4C 9/16 - 18 3/8S3999-6B 11/16 - 16 1/4S3999-6C 11/16 - 16 3/8S3999-6D 11/16 - 16 1/2S3999-8B 13/16 - 16 1/4S3999-8C 13/16 - 16 3/8S3999-8D 13/16 - 16 1/2S3999-8E 13/16 - 16 3/4S3999-10D 1 - 14 1/2S3999-10E 1 - 14 3/4S3999-12D 1-3/16 - 12 1/2S3999-12E 1-3/16 - 12 3/4S3999-12H 1-3/16 - 12 1S3999-16E 1-7/16 - 12 3/4S3999-16H 1-7/16 - 12 1S3999-20H 1-11/16 - 12 1S3999-20J 1-11/16 - 12 1-1/4S3999-24K 2 - 12 1-1/2

LOCK NUT

PART No. ORFSS3931N-4 9/16 - 18S3931N-6 11/16 - 16S3931N-8 13/16 - 16S3931N-10 1 - 14S3931N-12 1-3/16 - 12S3931N-16 1-7/16 - 12S3931N-20 1-11/16 - 12S3931N-24 2 - 12

C

59.

FAIRVIEW O-RING FACE SEALADAPTERS ARE DESIGNED TO

PROVIDE SUPERIORRESISTANCE TO VIBRATIONAND LEAKAGE IN THE MOST

DEMANDING OF APPLICATIONS.

TEEMale To FemaleTo Male O-Ring

Face Seal

Male FemalePART No. ORFS ORFSS3951F-4 9/16 - 18 9/16 - 18S3951F-6 11/16 - 16 11/16 - 16S3951F-8 13/16 - 16 13/16 - 16S3951F-10 1 - 14 1 - 14S3951F-12 1-3/16 - 12 1-3/16 - 12S3951F-16 1-7/16 - 12 1-7/16 - 12S3951F-20 1-11/16 - 12 1-11/16 - 12S3951F-24 2 - 12 2 - 12

TEEO-Ring Face

Seal ToMale Pipe

PART No. ORFS Pipe S3945-4B 9/16 - 18 1/4S3945-6B 11/16 - 16 1/4S3945-6C 11/16 - 16 3/8S3945-8C 13/16 - 16 3/8S3945-8D 13/16 - 16 1/2S3945-10D 1 - 14 1/2S3945-12E 1-3/16 - 12 3/4S3945-16H 1-7/16 - 12 1S3945-20J 1-11/16 - 12 1-1/4

TEEMale O-RingFace Seal To

Female O-RingFace Seal

Male FemalePART No. ORFS ORFSS3945F-4 9/16 - 18 9/16 - 18S3945F-6 11/16 - 16 11/16 - 16S3945F-8 13/16 - 16 13/16 - 16S3945F-10 1 - 14 1 - 14S3945F-12 1-3/16 - 12 1-3/16 - 12S3945F-16 1-7/16 - 12 1-7/16 - 12S3945F-20 1-11/16 - 12 1-11/16 - 12S3945F-24 2 - 12 2 - 12

CROSSO-Ring FaceSeal All Ends

PART No. ORFSS3952-4 9/16 - 18S3952-6 11/16 - 16S3952-8 13/16 - 16S3952-10 1 - 14S3952-12 1-3/16 - 12S3952-16 1-7/16 - 12S3952-20 1-11/16 - 12


BULKHEADTEE

O-Ring FaceSeal All Ends

PART No. ORFSS3944BH-4 9/16 - 18S3944BH-6 11/16 - 16S3944BH-8 13/16 - 16S3944BH-10 1 - 14S3944BH-12 1-3/16 - 12S3944BH-16 1-7/16 - 12S3944BH-20 1-11/16 - 12S3944BH-24 2 - 12

TEEO-Ring FaceSeal All Ends

PART No. ORFSS3944-4 9/16 - 18S3944-6 11/16 - 16S3944-8 13/16 - 16S3944-10 1 - 14S3944-12 1-3/16 - 12S3944-16 1-7/16 - 12S3944-20 1-11/16 - 12S3944-24 2 - 12

TEEO-Ring Face

Seal To O-RingBoss

PART No. ORFS O-RingS3972-4 9/16 - 18 7/16 - 20S3972-6 11/16 - 16 9/16 - 18S3972-8 13/16 - 16 3/4 - 16S3972-10 1 - 14 7/8 - 14S3972-12 1-3/16 - 12 1-1/16 - 12S3972-16 1-7/16 - 12 1-5/16 - 12S3972-20 1-11/16 - 12 1-5/8 - 12S3972-24 2 - 12 1-7/8 - 12

TEEO-Ring Face

Seal ToO-Ring Boss To

O-Ring FaceSeal

PART No. ORFS O-RingS3971-4 9/16 - 18 7/16 - 20S3971-46 9/16 - 18 9/16 - 18S3971-6 11/16 - 16 9/16 - 18S3971-8 13/16 - 16 3/4 - 16S3971-86 13/16 - 16 9/16 - 18S3971-10 1 - 14 7/8 - 14S3971-12 1-3/16 - 12 1-1/16 - 12S3971-16 1-7/16 - 12 1-5/16 - 12S3971-20 1-11/16 - 12 1-5/8 - 12S3971-24 2 - 12 1-7/8 - 12

45° ELBOWO-Ring FaceSeal To MaleO-Ring Boss

PART No. ORFS O-Ring S3974-4 9/16 - 18 7/16 - 20S3974-46 9/16 - 18 9/16 - 18S3974-6 11/16 - 16 9/16 - 18S3974-64 11/16 - 16 7/16 - 20S3974-68 11/16 - 16 3/4 - 16S3974-8 13/16 - 16 3/4 - 16S3974-86 13/16 - 16 9/16 - 18S3974-810 13/16 - 16 7/8 - 14S3974-10 1 - 14 7/8 - 14S3974-108 1 - 14 3/4 - 16S3974-1012 1 - 14 1-1/16 - 12S3974-12 1-3/16 - 12 1-1/16 - 12S3974-1210 1-3/16 - 12 7/8 - 14S3974-1216 1-3/16 - 12 1-5/16 - 12S3974-16 1-7/16 - 12 1-5/16 - 12S3974-1612 1-7/16 - 12 1-1/16 - 12S3974-1620 1-7/16 - 12 1-5/8 - 12S3974-20 1-11/16 - 12 1-5/8 - 12S3974-24 2 - 12 1-7/8 - 12

BULKHEAD45° ELBOWO-Ring Face

Seal ToO-Ring Face

Seal

PART No. ORFS Tube S3954BH-4 9/16 - 18 1/4S3954BH-6 11/16 - 16 3/8S3954BH-8 13/16 - 16 1/2S3954BH-10 1 - 14 5/8S3954BH-12 1-3/16 - 12 3/4S3954BH-16 1-7/16 - 12 1S3954BH-20 1-11/16 - 12 1-1/4S3954BH-24 2 - 12 1-1/2


Seal ToMale JIC

PART No. ORFS Tube S3954-4 9/16 - 18 1/4S3954-6 11/16 - 16 3/8S3954-8 13/16 - 16 1/2S3954-10 1 - 14 5/8S3954-12 1-3/16 - 12 3/4S3954-16 1-7/16 - 12 1

C

60.

TUBE SLEEVE

PART No. Tube S6760-4 1/4

S6760-6 3/8

S6760-8 1/2

S6760-10 5/8

S6760-12 3/4

S6760-16 1

TUBE NUT

PART No. TubeS6761-4 1/4

S6761-6 3/8

S6761-8 1/2

S6761-10 5/8

S6761-12 3/4

S6761-16 1

UNIONTube To

Tube


S6762-6 3/8

S6762-8 1/2

S6762-10 5/8

S6762-12 3/4

S6762-16 1

TEETube

Three Ends


S6764-6 3/8

S6764-8 1/2

90° ELBOWTube To

Tube


S6765-6 3/8

S6765-8 1/2

CONNECTORTube To

Female Pipe

PART No. Tube PipeS6766-4A 1/4 1/8

S6766-4B 1/4 1/4

S6766-6B 3/8 1/4

S6766-6C 3/8 3/8

S6766-8C 1/2 3/8

S6766-8D 1/2 1/2

S6766-10D 5/8 1/2

S6766-12E 3/4 3/4

S6766-16H 1 1

CONNECTORTube To Male

Pipe


S6768-4A 1/4 1/8

S6768-4B 1/4 1/4

S6768-4C 1/4 3/8

S6768-6A 3/8 1/8

S6768-6B 3/8 1/4

S6768-6C 3/8 3/8

S6768-6D 3/8 1/2

S6768-8C 1/2 3/8

S6768-8D 1/2 1/2

S6768-10C 5/8 3/8

S6768-10D 5/8 1/2

S6768-12D 3/4 1/2

S6768-12E 3/4 3/4

S6768-16H 1 1

90° ELBOWTube To

Male Pipe


S6769-4B 1/4 1/4

S6769-6B 3/8 1/4

S6769-6C 3/8 3/8

S6769-6D 3/8 1/2

S6769-8B 1/2 1/4

S6769-8C 1/2 3/8

S6769-8D 1/2 1/2

S6769-10D 5/8 1/2

S6769-12D 3/4 1/2

S6769-12E 3/4 3/4

S6769-16H 1 1

STEEL FLARELESS ADAPTERS

C

61.

STEEL S.A.E. PIPE ADAPTERS

COUPLINGFemale Both

Ends

PART No. Pipe Pipe S1003-A 1/8 1/8S1003-B 1/4 1/4S1003-BA 1/4 1/8S1003-C 3/8 3/8S1003-CA 3/8 1/8S1003-CB 3/8 1/4S1003-D 1/2 1/2S1003-DB 1/2 1/4S1003-DC 1/2 3/8S1003-E 3/4 3/4S1003-EC 3/4 3/8S1003-ED 3/4 1/2S1003-H 1 1S1003-HD 1 1/2S1003-HE 1 3/4S1003-J 1-1/4 1-1/4S1003-JH 1-1/4 1S1003-K 1-1/2 1-1/2S1003-M 2 2

HEX NIPPLEMale Both

Ends

PART No. Pipe PipeS1022-A 1/8 1/8S1022-B 1/4 1/4S1022-BA 1/4 1/8S1022-C 3/8 3/8S1022-CA 3/8 1/8S1022-CB 3/8 1/4S1022-D 1/2 1/2S1022-DB 1/2 1/4S1022-DC 1/2 3/8S1022-E 3/4 3/4S1022-EB 3/4 1/4S1022-EC 3/4 3/8S1022-ED 3/4 1/2S1022-H 1 1S1022-HD 1 1/2S1022-HE 1 3/4S1022-J 1-1/4 1-1/4S1022-JE 1-1/4 3/4S1022-JH 1-1/4 1S1022-K 1-1/2 1-1/2S1022-KE 1-1/2 3/4S1022-KH 1-1/2 1S1022-KJ 1-1/2 1-1/4S1022-M 2 2S1022-MH 2 1S1022-MJ 2 1-1/4S1022-MK 2 1-1/2

REDUCERFemale To Male

Female MalePART No. Pipe PipeS1020-AA 1/8 1/8S1020-BA 1/4 1/8S1020-BB 1/4 1/4S1020-BC 1/4 3/8S1020-BD 1/4 1/2S1020-CA 3/8 1/4S1020-CB 3/8 1/4S1020-CC 3/8 3/8S1020-CD 3/8 1/2S1020-CE 3/8 3/4S1020-DA 1/2 1/8S1020-DB 1/2 1/4S1020-DC 1/2 3/8S1020-DD 1/2 1/2S1020-DE 1/2 3/4S1020-EB 3/4 1/4S1020-EC 3/4 3/8S1020-ED 3/4 1/2S1020-EE 3/4 3/4S1020-EH 3/4 1S1020-HD 1 1/2S1020-HE 1 3/4S1020-HH 1 1S1020-HJ 1 1-1/4S1020-JE 1-1/4 3/4S1020-JH 1-1/4 1S1020-JJ 1-1/4 1-1/4S1020-JK 1-1/4 1-1/2S1020-KJ 1-1/2 1-1/4S1020-KK 1-1/2 1-1/2S1020-MK 2 1-1/2S1020-MM 2 2

BUSHINGMale ToFemale

Male FemalePART No. Pipe PipeS1010-BA 1/4 1/8S1010-CA 3/8 1/8S1010-CB 3/8 1/4S1010-DA 1/2 1/8S1010-DB 1/2 1/4S1010-DC 1/2 3/8S1010-EA 3/4 1/8S1010-EB 3/4 1/4S1010-EC 3/4 3/8S1010-ED 3/4 1/2S1010-HB 1 1/4S1010-HC 1 3/8S1010-HD 1 1/2S1010-HE 1 3/4S1010-JB 1-1/4 1/4S1010-JC 1-1/4 3/8S1010-JD 1-1/4 1/2S1010-JE 1-1/4 3/4S1010-JH 1-1/4 1S1010-KB 1-1/2 1/4S1010-KC 1-1/2 3/8S1010-KD 1-1/2 1/2S1010-KE 1-1/2 3/4S1010-KH 1-1/2 1S1010-KJ 1-1/2 1-1/4S1010-ME 2 3/4S1010-MH 2 1S1010-MJ 2 1-1/4S1010-MK 2 1-1/2

PLUGHEX HEAD

PART No. PipeS1021-A 1/8S1021-B 1/4S1021-C 3/8S1021-D 1/2S1021-E 3/4S1021-H 1S1021-J 1-1/4S1021-K 1-1/2S1021-M 2

PLUGSQUARE

HEAD

PART No. PipeS1009-A 1/8S1009-B 1/4S1009-C 3/8S1009-D 1/2S1009-E 3/4S1009-H 1S1009-J 1-1/4S1009-K 1-1/2

PLUGCOUNTER SUNK

HEX


SHORT NIPPLE

PART No. Pipe LengthS1012-A 1/8 3/4S1012-B 1/4 7/8S1012-C 3/8 1S1012-D 1/2 1-1/8S1012-E 3/4 1-3/8S1012-H 1 1-1/2S1012-J 1-1/4 1-5/8

C

62.


90° ELBOWMale To

Male

PART No. Pipe PipeS1099-A 1/8 1/8S1099-BA 1/4 1/8S1099-B 1/4 1/4S1099-C 3/8 3/8S1099-CB 3/8 1/4S1099-D 1/2 1/2S1099-DB 1/2 1/4S1099-DC 1/2 3/8S1099-E 3/4 3/4S1099-ED 3/4 1/2S1099-H 1 1S1099-HD 1 1/2S1099-HE 1 3/4S1099-J 1-1/4 1-1/4S1099-K 1-1/2 1-1/2S1099-M 2 2

90° ELBOWMale To Female

Male FemalePART No. Pipe PipeS1016-A 1/8 1/8S1016-AB 1/8 1/4S1016-AC 1/8 3/8S1016-B 1/4 1/4S1016-BA 1/4 1/8S1016-BC 1/4 3/8S1016-C 3/8 3/8S1016-CB 3/8 1/4S1016-CD 3/8 1/2S1016-D 1/2 1/2S1016-DB 1/2 1/4S1016-DC 1/2 3/8S1016-DE 1/2 3/4S1016-E 3/4 3/4S1016-EC 3/4 3/8S1016-ED 3/4 1/2S1016-EH 3/4 1S1016-H 1 1S1016-HE 1 3/4S1016-HJ 1 1-1/4S1016-J 1-1/4 1-1/4S1016-JH 1-1/4 1S1016-JK 1-1/4 1-1/2S1016-K 1-1/2 1-1/2S1016-M 2 2

90° ELBOWFemale To

Female

PART No. Pipe PipeS1000-A 1/8 1/8S1000-B 1/4 1/4S1000-BA 1/4 1/8S1000-C 3/8 3/8S1000-CB 3/8 1/4S1000-D 1/2 1/2S1000-DB 1/2 1/4S1000-DC 1/2 3/8S1000-E 3/4 3/4S1000-EC 3/4 3/8S1000-ED 3/4 1/2S1000-H 1 1S1000-HD 1 1/2S1000-HE 1 3/4S1000-J 1-1/4 1-1/4S1000-JE 1-1/4 3/4S1000-JH 1-1/4 1S1000-K 1-1/2 1-1/2S1000-KJ 1-1/2 1-1/4S1000-M 2 2

LONGNIPPLE

PART No. Pipe LengthS1013-A1-1/2 1/8 1-1/2S1013-A2 1/8 2S1013-A2-1/2 1/8 2-1/2S1013-A3 1/8 3S1013-A3-1/2 1/8 3-1/2S1013-A4 1/8 4S1013-A4-1/2 1/8 4-1/2S1013-A5 1/8 5S1013-A6 1/8 6S1013-B1-1/2 1/4 1-1/2S1013-B2 1/4 2S1013-B2-1/2 1/4 2-1/2S1013-B3 1/4 3S1013-B3-1/2 1/4 3-1/2S1013-B4 1/4 4S1013-B4-1/2 1/4 4-1/2S1013-B5 1/4 5S1013-B5-1/2 1/4 5-1/2S1013-B6 1/4 6S1013-C1-1/2 3/8 1-1/2S1013-C2 3/8 2S1013-C2-1/2 3/8 2-1/2S1013-C3 3/8 3S1013-C4 3/8 4S1013-C5 3/8 5S1013-C5-1/2 3/8 5-1/2S1013-C6 3/8 6S1013-D1-1/2 1/2 1-1/2S1013-D2 1/2 2S1013-D2-1/2 1/2 2-1/2S1013-D3 1/2 3S1013-D3-1/2 1/2 3-1/2S1013-D4 1/2 4S1013-D5 1/2 5S1013-D6 1/2 6S1013-E2 3/4 2S1013-E2-1/2 3/4 2-1/2S1013-E3 3/4 3S1013-E3-1/2 3/4 3-1/2S1013-E4 3/4 4S1013-E4-1/2 3/4 4-1/2S1013-E5 3/4 5S1013-E5-1/2 3/4 5-1/2S1013-E6 3/4 6S1013-H2 1 2S1013-H2-1/2 1 2-1/2S1013-H3 1 3S1013-H3-1/2 1 3-1/2S1013-H4 1 4S1013-H4-1/2 1 4-1/2S1013-H5 1 5S1013-H5-1/2 1 5-1/2S1013-H6 1 6S1013-J2 1-1/4 2S1013-J3 1-1/4 3S1013-J3-1/2 1-1/4 3-1/2S1013-J4 1-1/4 4

90° ELBOWFemale To Male

Swivel

Female MalePART No. Pipe PipeS1016SW-B 1/4 1/4S1016SW-C 3/8 3/8S1016SW-D 1/2 1/2S1016SW-E 3/4 3/4

90° ELBOWMale To

Male Swivel

PART No. Pipe SwivelS1099SW-B 1/4 1/4S1099SW-C 3/8 3/8S1099SW-D 1/2 1/2S1099SW-E 3/4 3/4

C

63.

TEEMale To

Female ToMale

Female MalePART No. Pipe PipeS1004-A 1/8 1/8S1004-B 1/4 1/4S1004-C 3/8 3/8S1004-D 1/2 1/2S1004-E 3/4 3/4S1004-H 1 1S1004-J 1-1/4 1-1/4S1004-K 1-1/2 1-1/2

TEEFemale ToFemale To

Male

Female MalePART No. Pipe PipeS1006-A 1/8 1/8S1006-B 1/4 1/4S1006-C 3/8 3/8S1006-D 1/2 1/2S1006-E 3/4 3/4S1006-H 1 1S1006-J 1-1/4 1-1/4S1006-K 1-1/2 1-1/2

TEEFemale

All Ends


TEEMale

All Ends

PART No. PipeS1001M-A 1/8S1001M-B 1/4S1001M-C 3/8S1001M-D 1/2S1001M-E 3/4S1001M-H 1S1001M-J 1-1/4

TEEMale To Male To

Female

Male FemalePART No. Pipe PipeS1006M-A 1/8 1/8S1006M-B 1/4 1/4S1006M-C 3/8 3/8S1006M-D 1/2 1/2S1006M-E 3/4 3/4S1006M-H 1 1S1006M-J 1-1/4 1-1/4

45° ELBOWMale ToFemale

Male FemalePART No. Pipe PipeS1024-A 1/8 1/8S1024-AB 1/8 1/4S1024-B 1/4 1/4S1024-C 3/8 3/8S1024-D 1/2 1/2S1024-E 3/4 3/4S1024-H 1 1S1024-J 1-1/4 1-1/4S1024-K 1-1/2 1-1/2

TEEFemale To

Male ToFemale

Female MalePART No. Pipe PipeS1007-A 1/8 1/8S1007-B 1/4 1/4S1007-C 3/8 3/8S1007-D 1/2 1/2S1007-E 3/4 3/4S1007-H 1 1S1007-J 1-1/4 1-1/4S1007-K 1-1/2 1-1/2S1007-M 2 2

CROSSFemale All

Ends


CAPFemale

PART No. PipeS1008-A 1/8S1008-B 1/4S1008-C 3/8S1008-D 1/2S1008-E 3/4

45° ELBOWFemale To

Female

PART No. PipeS1005-A 1/8S1005-B 1/4S1005-C 3/8S1005-D 1/2S1005-E 3/4S1005-H 1S1005-J 1-1/4

45° ELBOWMale To

Male

PART No. PipeS1005M-A 1/8S1005M-B 1/4S1005M-C 3/8S1005M-D 1/2S1005M-E 3/4S1005M-H 1S1005M-J 1-1/4S1005M-K 1-1/2


C

64.

STEEL S.A.E. SWIVEL NPSM ADAPTERS

CONNECTORFemale Pipe ToNPSM Swivel

PART No. Pipe SwivelS1103-AA 1/8 1/8S1103-AB 1/8 1/4S1103-BA 1/4 1/8S1103-BB 1/4 1/4S1103-BC 1/4 3/8S1103-CB 3/8 1/4S1103-CC 3/8 3/8S1103-CD 3/8 1/2S1103-DB 1/2 1/4S1103-DC 1/2 3/8S1103-DD 1/2 1/2S1103-DE 1/2 3/4S1103-ED 3/4 1/2S1103-EE 3/4 3/4S1103-EH 3/4 1S1103-HE 1 3/4S1103-HH 1 1S1103-JJ 1-1/4 1-1/4S1103-KK 1-1/2 1-1/2S1103-MM 2 2

90° ELBOWFemale Pipe ToNPSM Swivel

PART No. Pipe SwivelS1100-AA 1/8 1/8S1100-AB 1/8 1/4S1100-BA 1/4 1/8S1100-BB 1/4 1/4S1100-BC 1/4 3/8S1100-CB 3/8 1/4S1100-CC 3/8 3/8S1100-CD 3/8 1/2S1100-DB 1/2 1/4S1100-DC 1/2 3/8S1100-DD 1/2 1/2S1100-DE 1/2 3/4S1100-ED 3/4 1/2S1100-EE 3/4 3/4S1100-EH 3/4 1S1100-HE 1 3/4S1100-HH 1 1S1100-JJ 1-1/4 1-1/4S1100-KK 1-1/2 1-1/2S1100-MM 2 2

* When ordering restricted flowadapters suffix part number with

required restriction hole size.(example: S1120-BB.040)CONNECTOR

Male Pipe ToNPSM Swivel

PART No. Pipe SwivelS1120-AA 1/8 1/8S1120-AB 1/8 1/4S1120-BA 1/4 1/8S1120-BB 1/4 1/4

*S1120-BB.000 1/4 1/4S1120-BC 1/4 3/8S1120-BD 1/4 1/2S1120-CB 3/8 1/4S1120-CC 3/8 3/8

*S1120-CC.000 3/8 3/8S1120-CD 3/8 1/2S1120-DB 1/2 1/4S1120-DC 1/2 3/8S1120-DD 1/2 1/2

*S1120-DD.000 1/2 1/2S1120-DE 1/2 3/4S1120-ED 3/4 1/2S1120-EE 3/4 3/4S1120-EH 3/4 1S1120-HE 1 3/4S1120-HH 1 1S1120-HJ 1 1-1/4S1120-JH 1-1/4 1S1120-JJ 1-1/4 1-1/4S1120-JK 1-1/4 1-1/2S1120-KJ 1-1/2 1-1/4S1120-KK 1-1/2 1-1/2S1120-MM 2 2


Male Pipe ToNPSM Swivel

PART No. Pipe SwivelS1116L-BB 1/4 1/4S1116L-CC 3/8 3/8S1116L-DC 1/2 3/8S1116L-DD 1/2 1/2S1116L-EE 3/4 3/4S1116L-HH 1 1

90° ELBOWMale Pipe ToNPSM Swivel

PART No. Pipe SwivelS1116-AA 1/8 1/8S1116-AB 1/8 1/4S1116-BA 1/4 1/8S1116-BB 1/4 1/4

*S1116-BB.000 1/4 1/4S1116-BC 1/4 3/8S1116-BD 1/4 1/2S1116-CB 3/8 1/4S1116-CC 3/8 3/8

*S1116-CC.000 3/8 3/8S1116-CD 3/8 1/2S1116-DB 1/2 1/4S1116-DC 1/2 3/8S1116-DD 1/2 1/2

*S1116-DD.000 1/2 1/2S1116-DE 1/2 3/4S1116-EB 3/4 1/4S1116-EC 3/4 3/8S1116-ED 3/4 1/2S1116-EE 3/4 3/4

*S1116-EE.000 3/4 3/4S1116-EH 3/4 1S1116-HD 1 1/2S1116-HE 1 3/4S1116-HH 1 1S1116-HJ 1 1-1/4S1116-JE 1-1/4 3/4S1116-JH 1-1/4 1S1116-JJ 1-1/4 1-1/4S1116-JK 1-1/4 1-1/2S1116-KJ 1-1/2 1-1/4S1116-KK 1-1/2 1-1/2S1116-MM 2 2

45° ELBOWFemale Pipe To

NPSM Swivel

PART No. Pipe SwivelS1105-AA 1/8 1/8S1105-AB 1/8 1/4S1105-BB 1/4 1/4S1105-BC 1/4 3/8S1105-CB 3/8 1/4S1105-CC 3/8 3/8S1105-DC 1/2 3/8S1105-DD 1/2 1/2S1105-ED 3/4 1/2S1105-EE 3/4 3/4S1105-HE 1 3/4S1105-HH 1 1S1105-JJ 1-1/4 1-1/4S1105-KK 1-1/2 1-1/2

45° ELBOWMale Pipe ToNPSM Swivel

PART No. Pipe SwivelS1124-AA 1/8 1/8S1124-AB 1/8 1/4S1124-BA 1/4 1/8S1124-BB 1/4 1/4S1124-CB 3/8 1/4S1124-CC 3/8 3/8S1124-CD 3/8 1/2S1124-DB 1/2 1/4S1124-DC 1/2 3/8S1124-DD 1/2 1/2S1124-DE 1/2 3/4S1124-EC 3/4 3/8S1124-ED 3/4 1/2S1124-EE 3/4 3/4S1124-EH 3/4 1S1124-HE 1 3/4S1124-HH 1 1S1124-HJ 1 1-1/4S1124-JH 1-1/4 1S1124-JJ 1-1/4 1-1/4S1124-KK 1-1/2 1-1/2S1124-MM 2 2

C

65.

STEEL S.A.E. SWIVEL NPSM ADAPTERS

* When ordering restricted flowadapters suffix part number with

required restriction hole size.(example: S1116-BB.040)

TEENPSM Swivel ToNPSM Swivel To

Male Pipe

PART No. Pipe SwivelS1106-AA 1/8 1/8S1106-BB 1/4 1/4S1106-BC 1/4 3/8S1106-CB 3/8 1/4S1106-CC 3/8 3/8S1106-DB 1/2 1/4S1106-DC 1/2 3/8S1106-DD 1/2 1/2S1106-ED 3/4 1/2S1106-EE 3/4 3/4S1106-EH 3/4 1S1106-HE 1 3/4S1106-HH 1 1S1106-JJ 1-1/4 1-1/4S1106-KK 1-1/2 1-1/2

TEENPSM Swivel

All Ends

PART No. SwivelS1111-A 1/8S1111-B 1/4S1111-C 3/8S1111-D 1/2S1111-E 3/4S1111-H 1S1111-J 1-1/4

TEENPSM Swivel ToNPSM Swivel To

Female Pipe

PART No. Pipe SwivelS1101-AA 1/8 1/8S1101-BB 1/4 1/4S1101-CB 3/8 1/4S1101-CC 3/8 3/8S1101-DC 1/2 3/8S1101-DD 1/2 1/2S1101-ED 3/4 1/2S1101-EE 3/4 3/4S1101-HE 1 3/4S1101-HH 1 1S1101-JJ 1-1/4 1-1/4

90° ELBOWMale O-Ring ToNPSM Swivel

PART No. O-Ring SwivelSO1116-4A 7/16 - 20 1/8SO1116-4B 7/16 - 20 1/4SO1116-4C 7/16 - 20 3/8SO1116-6B 9/16 - 18 1/4SO1116-6C 9/16 - 18 3/8SO1116-6D 9/16 - 18 1/2SO1116-8B 3/4 - 16 1/4SO1116-8C 3/4 - 16 3/8SO1116-8D 3/4 - 16 1/2SO1116-8E 3/4 - 16 3/4SO1116-10B 7/8 - 14 1/4SO1116-10C 7/8 - 14 3/8SO1116-10D 7/8 - 14 1/2SO1116-10E 7/8 - 14 3/4SO1116-12C 1-1/16 - 12 3/8SO1116-12D 1-1/16 - 12 1/2SO1116-12E 1-1/16 - 12 3/4SO1116-12H 1-1/16 - 12 1SO1116-14E 1-3/16 - 12 3/4SO1116-16E 1-5/16 - 12 3/4SO1116-16J 1-5/16 - 12 1-1/4SO1116-16H 1-5/16 - 12 1SO1116-20E 1-5/8 - 12 3/4SO1116-20J 1-5/8 - 12 1-1/4SO1116-24K 1-7/8 - 12 1-1/2SO1116-32M 2-1/2 - 12 2

CONNECTORMale O-Ring ToNPSM Swivel

PART No. O-Ring SwivelSO1120-4A 7/16 - 20 1/8SO1120-4B 7/16 - 20 1/4SO1120-4C 7/16 - 20 3/8SO1120-5B 1/2 - 20 1/4SO1120-6B 9/16 - 18 1/4SO1120-6C 9/16 - 18 3/8SO1120-6D 9/16 - 18 1/2SO1120-8B 3/4 - 16 1/4SO1120-8C 3/4 - 16 3/8SO1120-8D 3/4 - 16 1/2SO1120-8E 3/4 - 16 3/4SO1120-10C 7/8 - 14 3/8SO1120-10D 7/8 - 14 1/2SO1120-10E 7/8 - 14 3/4SO1120-12D 1-1/16 - 12 1/2SO1120-12E 1-1/16 - 12 3/4SO1120-12H 1-1/16 - 12 1SO1120-14E 1-3/16 - 12 3/4SO1120-16E 1-5/16 - 12 3/4SO1120-16H 1-5/16 - 12 1SO1120-16J 1-5/16 - 12 1-1/4SO1120-20H 1-5/8 - 12 1SO1120-20E 1-5/8 - 12 3/4SO1120-20J 1-5/8 - 12 1-1/4SO1120-24J 1-7/8 - 12 1-1/4SO1120-24K 1-7/8 - 12 1-1/2SO1120-32M 2-1/2 - 12 2

45° ELBOWMale O-Ring ToNPSM Swivel

PART No. O-Ring SwivelSO1124-4B 7/16 - 20 1/4SO1124-6B 9/16 - 18 1/4SO1124-6C 9/16 - 18 3/8SO1124-8C 3/4 - 16 3/8SO1124-8D 3/4 - 16 1/2SO1124-8E 3/4 - 16 3/4SO1124-10C 7/8 - 14 3/8SO1124-10D 7/8 - 14 1/2SO1124-10E 7/8 - 14 3/4SO1124-12D 1-1/16 - 12 1/2SO1124-12E 1-1/16 - 12 3/4SO1124-16E 1-5/16 - 12 3/4SO1124-16H 1-5/16 - 12 1SO1124-20J 1-5/8 - 12 1-1/4SO1124-24K 1-7/8 - 12 1-1/2

O-RING BOSS TO NPSM(BUNA-N O-RING STANDARD)

C

66.

STEEL METRIC AND BSP ADAPTERS

90° ELBOW37° Tube to


MalePART No. Tube BSPPS3749BSPP-44 1/4 1/4S3749BSPP-64 3/8 1/4S3749BSPP-66 3/8 3/8S3749BSPP-68 3/8 1/2S3749BSPP-86 1/2 3/8S3749BSPP-88 1/2 1/2S3749BSPP-128 3/4 1/2S3749BSPP-1212 3/4 3/4S3749BSPP-1616 1 1

CONNECTOR37° Tube to

KomatsuMale

PART No. Tube KomatsuS3748KM-4-14 1/4 14x1.5S3748KM-6-18 3/8 18x1.5S3748KM-8-22 1/2 22x1.5S3748KM-10-24 5/8 24x1.5S3748KM-12-30 3/4 30x1.5S3748KM-16-33 1 33x1.5



MalePART No. Tube BSPPS3748BSPP-44 1/4 1/4S3748BSPP-46 1/4 3/8S3748BSPP-64 3/8 1/4S3748BSPP-66 3/8 3/8S3748BSPP-86 1/2 3/8S3748BSPP-88 1/2 1/2S3748BSPP-128 3/4 1/2S3748BSPP-1212 3/4 3/4S3748BSPP-1616 1 1



MalePART No. Tube BSPT S3748BSPT-4B 1/4 1/4S3748BSPT-4C 1/4 3/8S3748BSPT-6B 3/8 1/4S3748BSPT-6C 3/8 3/8S3748BSPT-8C 1/2 3/8S3748BSPT-8D 1/2 1/2S3748BSPT-12D 3/4 1/2S3748BSPT-12E 3/4 3/4S3748BSPT-16H 1 1

90° ELBOW37° Tube to


MalePART No. Tube BSPT S3749BSPT-4B 1/4 1/4S3749BSPT-6B 3/8 1/4S3749BSPT-6C 3/8 3/8S3749BSPT-6D 3/8 1/2S3749BSPT-8C 1/2 3/8S3749BSPT-8D 1/2 1/2S3749BSPT-12D 3/4 1/2S3749BSPT-12E 3/4 3/4S3749BSPT-16H 1 1

CONNECTOR37° Tube to(Light DIN)Male Metric

PART No. Tube MetricTubeS3748LM-4-12 1/4 12x1.5 6 MMS3748LM-4-14 1/4 14x1.5 8 MMS3748LM-6-14 3/8 14x1.5 8 MMS3748LM-6-16 3/8 16x1.5 10 MMS3748LM-6-18 3/8 18x1.5 12 MMS3748LM-8-16 1/2 16x1.5 10 MMS3748LM-8-18 1/2 18x1.5 12 MMS3748LM-8-22 1/2 22x1.5 15 MMS3748LM-10-22 5/8 22x1.5 15 MMS3748LM-12-26 3/4 26x1.5 18 MM

CONNECTOR37° Tube to(Heavy DIN)Male Metric

PART No. Tube Metric TubeS3748HM-4-14 1/4 14x1.5 6 MMS3748HM-4-16 1/4 16x1.5 8 MMS3748HM-6-16 3/8 16x1.5 8 MMS3748HM-6-18 3/8 18x1.5 10 MMS3748HM-6-20 3/8 20x1.5 12 MMS3748HM-8-18 1/2 18x1.5 10 MMS3748HM-8-22 1/2 22x1.5 14 MMS3748HM-8-24 1/2 24x1.5 16 MMS3748HM-10-20 5/8 20x1.5 12 MMS3748HM-12-36 3/4 36x2 25 MM

CONNECTOR37° Tube toMale Metric

PART No. Tube MetricS3748MM-4-12 1/4 12x1.5S3748MM-4-14 1/4 14x1.5S3748MM-6-12 3/8 12x1.5S3748MM-6-14 3/8 14x1.5S3748MM-6-16 3/8 16x1.5S3748MM-8-18 1/2 18x1.5S3748MM-8-22 1/2 22x1.5S3748MM-10-20 5/8 20x1.5S3748MM-12-22 3/4 22x1.5

BRITISH PARALLEL AND TAPERED PIPE ADAPTERS SPECIALTY ADAPTERS

90° ELBOW37° Tube toMale Metric

PART No. Tube MetricS3749MM-4-12 1/4 12x1.5S3749MM-4-14 1/4 14x1.5S3749MM-6-12 3/8 12x1.5S3749MM-6-14 3/8 14x1.5S3749MM-6-16 3/8 16x1.5S3749MM-8-18 1/2 18x1.5S3749MM-8-22 1/2 22x1.5S3749MM-10-20 5/8 20x1.5S3749MM-12-22 3/4 22x1.5

PLUGHex Head

PART No. MetricS3621MM-10 10X1.0S3621MM-12 12X1.5S3621MM-14 14X1.5S3621MM-16 16X1.5S3621MM-18 18X1.5S3621MM-20 20X1.5S3621MM-24 24X1.5S3621MM-26 26X1.5

PLUGCounter Sunk Hex

PART No. MetricS3618MM-10 10X1.0S3618MM-12 12X1.5S3618MM-14 14X1.5S3618MM-16 16X1.5S3618MM-18 18X1.5S3618MM-20 20X1.5S3618MM-24 24X1.5S3618MM-26 26X1.5


KobelcoMale

PART No. Tube KobelcoS3748KOB-12-36 3/4 36x1.5S3748KOB-16-36 1 36x1.5S3748KOB-16-45 1 45x1.5S3748KOB-20-45 1-1/4 45x1.5

METRIC ADAPTERS

BONDEDSEAL

PART No. MetricS3631BMM-10 10MMS3631BMM-12 12MMS3631BMM-14 14MMS3631BMM-16 16MMS3631BMM-18 18MMS3631BMM-20 20MMS3631BMM-22 22MMS3631BMM-24 24MMS3631BMM-26 26MMS3631BMM-36 36MM

** NOTE: Bonded Seal Not Included ** NOTE: Bonded Seal Not Included

C

67.

FemalePART No. W.O.G. PipeBVSS2003-B-800 800 1/4BVSS2003-C-800 800 3/8BVSS2003-D-800 800 1/2BVSS2003-E-800 800 3/4BVSS2003-H-800 800 1BVSS2003-J-800 800 1-1/4BVSS2003-K-800 800 1-1/2BVSS2003-M-800 800 2

FemalePART No. W.O.G. PipeBVSS2003-B-1000 1000 1/4BVSS2003-C-1000 1000 3/8BVSS2003-D-1000 1000 1/2BVSS2003-E-1000 1000 3/4BVSS2003-H-1000 1000 1BVSS2003-J-1000 1000 1-1/4BVSS2003-K-1000 1000 1-1/2BVSS2003-M-1000 1000 2

CARBON STEEL 316 STAINLESS STEEL

FemalePART No. W.O.G. PipeBVCS2103-B 2000 1/4BVCS2103-C 2000 3/8BVCS2103-D 2000 1/2BVCS2103-E 2000 3/4BVCS2103-H 2000 1BVCS2103-J 2000 1-1/4BVCS2103-K 2000 1-1/2BVCS2103-M 2000 2

FemalePART No. W.O.G. PipeBVSS2103-B 2000 1/4BVSS2103-C 2000 3/8BVSS2103-D 2000 1/2BVSS2103-E 2000 3/4BVSS2103-H 2000 1BVSS2103-J 2000 1-1/4BVSS2103-K 2000 1-1/2BVSS2103-M 2000 2

1 - PIECE BAR STOCK DESIGN, STANDARD PORT

1 - PIECE DESIGN, STANDARD PORT

316 STAINLESS STEEL2 - PIECE DESIGN, FULL PORT

316 STAINLESS STEEL

CARBON AND STAINLESS STEEL BALL VALVES

D

68.

FemalePART No. W.O.G. PipeBVCS2203-B 2000 1/4BVCS2203-C 2000 3/8BVCS2203-D 2000 1/2 BVCS2203-E 2000 3/4 BVCS2203-H 2000 1 BVCS2203-J 1500 1-1/4 BVCS2203-K 1500 1-1/2 BVCS2203-M 1500 2

FemalePART No. W.O.G. PipeBVSS2203-B 2000 1/4BVSS2203-C 2000 3/8BVSS2203-D 2000 1/2BVSS2203-E 2000 3/4BVSS2203-H 2000 1BVSS2203-J 1500 1-1/4BVSS2203-K 1500 1-1/2BVSS2203-M 1500 2

CARBON AND STAINLESS STEEL BALL VALVES

2 - PIECE DESIGN, MEDIUM PRESSURE, FULL PORT 3 - PIECE DESIGN, HIGH PRESSURE, FULL PORT

CARBON STEEL 316 STAINLESS STEEL

FemalePART No. W.O.G. PipeBVCS2303-B 3000 1/4BVCS2303-C 3000 3/8BVCS2303-D 3000 1/2BVCS2303-E 3000 3/4BVCS2303-H 3000 1

Female PortPART No. W.O.G. Pipe StyleBVCS2403-B 7250 1/4 FullBVCS2403-C 7250 3/8 FullBVCS2403-D 7250 1/2 FullBVCS2403-E 5075 3/4 FullBVCS2403-H 5075 1 FullBVCS2403-J 5075 1-1/4 StandardBVCS2403-K 5075 1-1/2 StandardBVCS2403-M 6174 2 Standard

Female PortPART No. W.O.G. O-Ring StyleBVCS2434-4 7250 7/16 - 20 FullBVCS2434-6 7250 9/16 - 18 FullBVCS2434-8 7250 3/4 - 16 FullBVCS2434-12 5075 1-1/16 - 12 FullBVCS2434-16 5075 1-5/16 - 12 Full

FemalePART No. W.O.G. PipeBVSS2403-B 5880 1/4BVSS2403-C 5880 3/8BVSS2403-D 5880 1/2BVSS2403-E 5880 3/4BVSS2403-H 5880 1

* OTHER CONFIGURATIONS AVAILABLE UPON REQUEST

* ALSO AVAILABLE IN S.A.E. THREADS

3 - PIECE DESIGN, HIGH PRESSURECARBON STEEL - NPTF PORTS CARBON STEEL - ORB PORTS

CARBON STEEL 316 STAINLESS STEEL2 - PIECE DESIGN, FULL PORT

D

69.

HYDRAULIC QUICK DISCONNECTCROSSOVER LISTING

BODY FAIRVIEW PART No. AEROQUIP FOSTER PARKER SAFEWAY FASTER PIONEER1/2 QD-AGC8-8F S45-41/2 QD-AGN8-8F S71-41/4 QD-AGC4-4F FD42-1001-4-4 4050-2P S25A-2P 4050-2P3/8 QD-AGC6-6F 4250-3P S45-3P 4250-3P3/4 QD-AGC12-12F 4150-5 S25F-6 NSP-34-NPT-F 4150-51 QD-AGC16-16F 4050-6P S25-8P NV-1-NPT-F 4050-6P

1/4 QD-AGN4-4F FD42-1002-4-4 4010-2P S41-2P 4010-2P3/8 QD-AGN6-6F 4010-3 S41-3P 4010-31/2 QD-AGN8-8F 8010-4 S71-4 2NS-12-NPT-M 8010-43/4 QD-AGN12-12F 4110-5 S21F-6 NSP-34-NPT-M 4110-51 QD-AGN16-16F 4010-6P S21-8P NV-1-NPT-M 4010-6P

1/4 QD-ISOAC4-4F 5601-4-4S 6601-4-4 S565-2 ANV 14 NPT F3/8 QD-ISOAC6-6F 5601-6-6S 6601-6-6 S565-3 ANV 38 NPT F 4050-31/2 QD-ISOAC8-8F 5601-8-10S 6601-8-10 S565-4 ANV 12 NPT F 4050-43/4 QD-ISOAC12-12F 5601-12-12S 6601-12-12 S565-6 ANV 34 NPT F1 QD-ISOAC16-16F 5601-16-16S 6601-16-16 S565-8 ANV 1 NPT F

1/4 QD-ISOAN4-4F 5602-4-4S 6602-4-4 S561-2 ANV 14 NPT M3/8 QD-ISOAN6-6F 5602-6-6S 6602-6-6 S561-3 ANV 38 NPT M1/2 QD-ISOAN8-8F 5602-8-10S 6602-8-10 S561-4 ANV 12 NPT M 8010-43/4 QD-ISOAN12-12F 5602-12-12S 6602-12-12 S561-6 ANV 34 NPT M1 QD-ISOAN16-16F 5602-16-16S 6602-16-16 S561-8 ANV 1 NPT M

1/4 QD-ISOBC4-4F FD45-1003-4-4 H2S H2-62 S105-2 HNV-14-NPT-F3/8 QD-ISOBC6-6F FD45-1003-6-6 H3S H3-62 S105-3 HNV-38-NPT-F1/2 QD-ISOBC8-8F FD45-1003-8-10 H4S H4-62 S105-4 HNV-12-NPT-F3/4 QD-ISOBC12-12F FD45-1003-12-12 H6S H6-62 S105-6 HNV-34-NPT-F1 QD-ISOBC16-16F FD45-1003-16-16 H8S H8-62 S105-8 HNV-1-NPT-F

1/4 QD-ISOBN4-4F FD45-1002-4-4 K2S H2-63 & HDH2-63 S101-2 HNV-14-NPT-M3/8 QD-ISOBN6-6F FD45-1002-6-6 K3S H3-63 & HDH3-63 S101-3 HNV-38-NPT-M1/2 QD-ISOBN8-8F FD45-1002-8-10 K4S H4-63 & HDH4-63 S101-4 HNV-12-NPT-M3/4 QD-ISOBN12-12F FD45-1002-12-12 K6S H6-63 & HDH6-63 S101-6 HNV-34-NPT-M1 QD-ISOBN16-16F FD45-1002-16-16 K8S H8-63 & HDH8-63 S101-8 HNV-1-NPT-M

1/4 QD-TCC4-4M 3050-2 S35-2P PVVM1/14-NPT-M 3050-23/8 QD-TCC6-6M 3050-3 S35-3P PVVM1/38-NPT-M 3050-31/4 QD-TCN4-4F 3010-2 S31-2P PVVM-14-NPT-F 3010-23/8 QD-TCN6-6F 3010-3 S31-3P PVVM-38-NPT-F 3010-31/4 QD-BISOBC4-4F FD45-1101-4-4 H2B BH2-60 BS105-2 HNV-14-NPT-F53/8 QD-BISOBC6-6F FD45-1101-6-6 H3B BH3-60 BS105-3 HNV-38-NPT-F51/2 QD-BISOBC8-8F FD45-1101-8-10 H4B BH4-60 BS105-4 HNV-12-NPT-F53/4 QD-BISOBC12-12F FD45-1101-12-12 H6B BH6-60 BS105-6 HNV-34-NPT-F51 QD-BISOBC16-16F FD45-1101-16-16 H8B BH8-60 BS105-8 HNV-1-NPT-F5

1/4 QD-BISOBN4-4F FD45-1086-4-4 K2B BH2-61 BS101-2 HNV-14-NPT-M53/8 QD-BISOBN6-6F FD45-1086-6-6 K3B BH3-61 BS101-3 HNV-38-NPT-M51/2 QD-BISOBN8-8F FD45-1086-8-10 K4B BH4-61 BS101-4 HNV-12-NPT-M53/4 QD-BISOBN12-12F FD45-1086-12-12 K6B BH6-61 BS101-6 HNV-34-NPT-M51 QD-BISOBN16-16F FD45-1086-16-16 K8B BH8-61 BS101-8 HNV-1-NPT-M5

3/4 QD-BTTWC12-12F 5100-S5-12B 6125-121 QD-BTTWC16-16F 5100-S5-16B 6125-16 FB16/1 NPT F5

1-1/4 QD-BTTWC20-20F 5100-S5-20B 6125-201-1/2 QD-BTTWC24-24F 5100-S5-24B 6125-243/4 QD-BTTWN12-12F 5100-S2-12B 6105-121 QD-BTTWN16-16F 5100-S2-16B 6105-16 FB16/1 NPT M5

1-1/4 QD-BTTWN20-20F 5100-S2-20B 6105-201-1/2 QD-BTTWN24-24F 5100-S2-24B 6105-241/4 QD-HTMAC4-4F FD89-1001-04-04 FEM-251-04FP-NL FFE495-2 2FFI14 NPT F3/8 QD-HTMAC6-6F FD89-1001-06-06 FF-371-6FP FFE495-3 2FFI38 NPT F3/8 QD-HTMAC6-8F FD89-1001-08-06 FF-371-8FP FFE495-3-8 2FFI38-1/2 NPT F1/2 QD-HTMAC8-8F FD89-1001-08-08 FE-501-8FP FFE495-8 2FFI12 NPT F1/2 QD-HTMAC8-12F FD89-1001-12-08 FFE495-8-3/4 2FFI12-34 NPT F3/4 QD-HTMAC12-12F FD89-1001-12-12 FEM-751-12FP-NL FFE495-6 2FFI34 NPT F1 QD-HTMAC16-16F FD89-1001-16-16 FEM-1001-16FP-NL FFE495-8 2FFI1 NPT F

1/4 QD-HTMAN4-4F FD89-1002-04-04 FEM-252-04FP-NL FFE491-2 2FFI14 NPT M3/8 QD-HTMAN6-6F FD89-1002-06-06 FF-372-6FP FFE491-3 2FFI38 NPT M3/8 QD-HTMAN6-8F FD89-1002-08-06 FF-372-8FP FFE491-3-8 2FFI38-1/2 NPT M1/2 QD-HTMAN8-8F FD89-1002-08-08 FE-502-8FP FFE491-8 2FFI12 NPT M1/2 QD-HTMAN8-12F FD89-1002-12-08 FFE491-8-3/4 2FFI12-34 NPT M3/4 QD-HTMAN12-12F FD89-1002-12-12 FEM-752-12FP-NL FFE491-6 2FFI34 NPT M1 QD-HTMAN16-16F FD89-1002-16-16 FEM-1002-16FP-NL FFE491-8 2FFI1 NPT M

E

70.

HYDRAULIC QUICK DISCONNECT COUPLINGS

SERIES B ISO 7241-1 INDUSTRIAL INTERCHANGE

Size Dust Plug Dust Cap1/4 QD-PDP-9 QD-PDC-113/8 QD-PDP-12 QD-PDC-141/2 QD-PDP-16 QD-PDC-173/4 QD-PDP-20 QD-PDC-211 QD-PDP-24 QD-PDC-26A

CC

ESSO

RIE

S

DUST PLUG DUST CAP

VALVED COUPLER - STEELPART No. Body Size Female PipeQD-ISOBC4-4F 1/4 1/4QD-ISOBC6-6F 3/8 3/8QD-ISOBC8-8F 1/2 1/2QD-ISOBC12-12F 3/4 3/4QD-ISOBC16-16F 1 1

VALVED COUPLER - BRASSPART No. Body Size Female PipeQD-BISOBC4-4F 1/4 1/4QD-BISOBC6-6F 3/8 3/8QD-BISOBC8-8F 1/2 1/2QD-BISOBC12-12F 3/4 3/4QD-BISOBC16-16F 1 1

VALVED COUPLER - STAINLESS (303)PART No. Body Size Female PipeQD-SISOBC4-4F 1/4 1/4QD-SISOBC6-6F 3/8 3/8QD-SISOBC8-8F 1/2 1/2QD-SISOBC12-12F 3/4 3/4QD-SISOBC16-16F 1 1

VALVED NIPPLE - STEELPART No. Body Size Female PipeQD-ISOBN4-4F 1/4 1/4QD-ISOBN6-6F 3/8 3/8QD-ISOBN8-8F 1/2 1/2QD-ISOBN12-12F 3/4 3/4QD-ISOBN16-16F 1 1

VALVED NIPPLE - BRASSPART No. Body Size Female PipeQD-BISOBN4-4F 1/4 1/4QD-BISOBN6-6F 3/8 3/8QD-BISOBN8-8F 1/2 1/2QD-BISOBN12-12F 3/4 3/4QD-BISOBN16-16F 1 1

VALVED NIPPLE - STAINLESS (303)PART No. Body Size Female PipeQD-SISOBN4-4F 1/4 1/4QD-SISOBN6-6F 3/8 3/8QD-SISOBN8-8F 1/2 1/2QD-SISOBN12-12F 3/4 3/4QD-SISOBN16-16F 1 1

• High flow characteristics and pressure ratings superiorto Parker 60 series.

• Industry interchangeability with other manufacturer’sISO “B” couplers and nipples.

• Poppet style double shut-off.• Proven ball lock mechanism.• 4 To 1 safety factor (Min. Burst = W.P. X 4)• Ideal for use with hydraulic and other fluids in both

stationary and mobile industrial applications.

COUPLER SETMAXIMUM WORKING PRESSURE (PSI)

1/4 3/8 1/2 3/4 1STEEL 5000 4350 4000 2600 2175BRASS 3500 3500 3500 2500 1500STAINLESS 5500 3750 3750 3000 3000

E

71.


• Interchangeable with Pioneer 4000 series, Safeway S20 and S40 series

• High Strength Steel Construction• Superior “Poppet” style valves• Nitrile NBR seals with Teflon PTFE back-up ring• Typical applications include agricultural equipment, gravel

trucks and dump trucks.

Female SleevePART No. Body Size Pipe Style QD-AGC4-4F 1/4 Coupler 1/4 One WayQD-AGC6-6F 3/8 Coupler 3/8 One WayQD-AGC8-8F 1/2 Coupler 1/2 Two WayQD-AGC12-12F 3/4 Coupler 3/4 One WayQD-AGC16-16F 1 Coupler 1 One Way

AGRICULTURAL (PIONEER 4000) INTERCHANGE

SNOW PLOW QUICK DISCONNECT


1/4 3/8 1/2 3/4 1

STEEL 5000 4350 3600 3600 3300

This high quality economical coupler is at the centre of every snowplow replacement parts package.

• High strength steel construction.• Coupler set maximum working pressure is 4000 P.S.I.

Also ask us about...• 1/4" S.A.E. 100R7 Synflex® Hose Assemblies in

various lengths and configurations.• Steel Hydraulic Adapters and Brass Adapters to meet

all your fitting needs.

Body FemalePART No. Description Size PipeQD-SP90 Snow Plow Set 1/4 1/4

DUST PLUG


CC

ESSO

RIE

S

DUST CAP

FemalePART No. Body Size PipeQD-AGN4-4F 1/4 Nipple 1/4QD-AGN6-6F 3/8 Nipple 3/8QD-AGN8-8F 1/2 Nipple 1/2QD-AGN12-12F 3/4 Nipple 3/4QD-AGN16-16F 1 Nipple 1

E

72.


DUST PLUG DUST CAP

SERIES A ISO 7241-1 PARKER 6600 INTERCHANGE

• Interchangeable with Parker 6600 series, Aeroquip 5600 Series, Safeway S56 Series and other manufacturer’s couplers and nipples built in accordance to I.S.O. 7241-1 Series “A”.

•4 to 1 Safety factor (Min. Burst = W.P. X 4)•High Strength Steel Construction.•Proven ball lock mechanism.•For use with hydraulic fluids in mobile and stationary applications.

VALVED COUPLER - STEEL

PART No. Body Size Female PipeQD-ISOAC4-4F 1/4 1/4QD-ISOAC6-6F 3/8 3/8QD-ISOAC8-8F 1/2 1/2QD-ISOAC12-12F 3/4 3/4QD-ISOAC16-16F 1 1

VALVED NIPPLE - STEEL

PART No. Body Size Female PipeQD-ISOAN4-4F 1/4 1/4QD-ISOAN6-6F 3/8 3/8QD-ISOAN8-8F 1/2 1/2QD-ISOAN12-12F 3/4 3/4QD-ISOAN16-16F 1 1


1/4 3/8 1/2 3/4 1

STEEL 4600 4600 4000 4000 3000


CC

ESSO

RIE

S

HIGH PRESSURE / THREAD TO CONNECT (PARKER 3000) INTERCHANGE

• Interconnect with Parker 3000 series, Faster PVV series and otherscrew to connect couplings used in the hydraulic tool and rescueequipment markets.

• Zero leakage and higher flow rates than commonly used metal to metalsealing.

• High strength steel construction with heavy duty clear zinc plating for excellent corrosion resistance

Size Dust Plug Dust Cap

1/4 QD-TCMDP-4 QD-TCMDC-4

3/8 QD-TCMDP-6 QD-TCMDC-6ACCE

SSOR

IES


WorkingPART No. Body Size Pipe Pressure (PSI)QD-TCC4-4M 1/4 Coupler 1/4 MPT 10,000QD-TCC6-6F 3/8 Coupler 3/8 FPT 10,000QD-TCC6-6M 3/8 Coupler 3/8 MPT 10,000


WorkingPART No. Body Size Pipe Pressure (PSI)QD-TCN4-4F 1/4 Nipple 1/4 FPT 10,000QD-TCN6-6F 3/8 Nipple 3/8 FPT 10,000

E

73.


HIGH PRESSURE FLUSH FACE• Air inclusion and fluid loss minimized to prevent spillage and

contamination of systems.• Push-To-Connect one hand operation.• Up to 10,000 PSI operation pressures.• Superior flow and low pressure drop.• Sleeve lock to provide protection against accidental disconnection.• (316) Stainless available upon request.


PART No. Body Size Female PipeQD-71-3C6-4F 3/8 1/4QD-71-3C6-6F 3/8 3/8QD-71-3C6-8F 3/8 1/2QD-71-3C8-8F 1/2 1/2QD-71-3C12-12F 3/4 3/4QD-71-3C16-16F 1 1QD-71-3C16-20F 1 1-1/4QD-71-1C32-24F 2 1-1/2QD-71-1C32-32F 2 2


PART No. Body Size Female PipeQD-71-3N6-4F 3/8 1/4QD-71-3N6-6F 3/8 3/8QD-71-3N6-8F 3/8 1/2QD-71-3N8-8F 1/2 1/2QD-71-3N12-12F 3/4 3/4QD-71-3N16-16F 1 1QD-71-3N16-20F 1 1-1/4QD-71-1N32-24F 2 1-1/2QD-71-1N32-32F 2 2

Size Coupler Cap Nipple Cap3/8 QD-71-3PCC-6 QD-71-3PNC-61/2 QD-71-3PCC-8 QD-71-3PNC-83/4 QD-71-3PCC-12 QD-71-3PNC-121 QD-71-3PCC-16 QD-71-3PNC-16

COUPLER SETMAXIMUM STATIC WORKING PRESSURE (PSI)

3/8 1/2 3/4 1 2

STEEL 10000 10000 7500 7500 5000

Note: Pressure ratings established understatic pressure conditions. Multiply by 0.6for high impulse applications.

ACCE

SSOR

IES


PART No. Body Size Female PipeQD-HTMAC4-4F 1/4 1/4QD-HTMAC6-6F 3/8 3/8QD-HTMAC6-8F 3/8 1/2QD-HTMAC8-8F 1/2 1/2QD-HTMAC8-12F 1/2 3/4QD-HTMAC12-12F 3/4 3/4QD-HTMAC16-16F 1 1


PART No. Body Size Female PipeQD-HTMAN4-4F 1/4 1/4QD-HTMAN6-6F 3/8 3/8QD-HTMAN6-8F 3/8 1/2QD-HTMAN8-8F 1/2 1/2QD-HTMAN8-12F 1/2 3/4QD-HTMAN12-12F 3/4 3/4QD-HTMAN16-16F 1 1

• Interchange with Aeroquip FD89/FD49, and Parker FE, FF size 3/8.• Up to 4,000 PSI operation pressures.• Superior flow and low pressure drop.• Sleeve lock feature.• Exceeds ANSI/NFPA T3.20.15-1991

ACCE

SSOR

IES

ISO 16028 HTMA FLUSH FACE

Size Coupler Cap Nipple Cap1/4 QD-HTMAPCC-4 QD-HTMAPNC-43/8 QD-HTMAPCC-6 QD-HTMAPNC-61/2 QD-HTMAPCC-8 QD-HTMAPNC-83/4 QD-HTMAPCC-12 QD-HTMAPNC-121 QD-HTMAPCC-16 QD-HTMAPNC-16

COUPLER SETMAXIMUM IMPULSE WORKING PRESSURE (PSI) *

1/4 3/8 1/2 3/4 1

STEEL 4285 4285 3571 3571 3571

* Note: For Maximum Static W.P. Multiply By 1.67

Note: Available with Female S.A.E. thread suffix with -EF

E

74.

WORKING PRESSURES (PSI)Valve and Valve (Double Shut-Off) Plain and PlainValve and Plain (Single Shut-Off) (No Shut-Off)

Q.D. Stainless StainlessSize Steel Brass Steel Steel Brass Steel1/4 6500 2250 5000 11000 4000 100003/8 4500 2250 4000 11000 4000 80001/2 4000 2000 3750 11000 4000 80003/4 3500 2000 2000 9000 3500 70001 2000 1750 2000 6000 3000 4000

1-1/4 1750 350 1500 5000 1000 30001-1/2 1500 350 1500 5000 1000 3000

2 1500 400 500 4000 750 10002-1/2 1000 400 400 1000 400 400

3 750 200 400 750 200 400


SNAPTITE “VH” (VALVED) AND “PH” (NON-VALVED) SERIES

• Fully engineered design meets or exceeds MIL-C-51234• “Jet Stream” valve design for superior, smoother flow.• Much more compact than standard hydraulic coupler sets.• Wide variety of sizes and configurations.• “VH” valved and “PH” non-valved are completely interchangeable for

double, single or no shut-off.• For non-valved couplers replace “V” in part number with “P”

Example: QD-PHN6-6F• For Brass prefix “V” in part number with “B” Example: BVHN6-6F• For Stainless prefix “V” in part number with “S” Example: SVHN6-6F• Proven by years of use in hydraulic-pneumatic applications handling a

variety of gases and fluids.


PART No. Body Size Female PipeQD-VHC4-2F 1/4 1/8QD-VHC4-4F 1/4 1/4QD-VHC6-6F 3/8 3/8QD-VHC8-8F 1/2 1/2QD-VHC12-12F 3/4 3/4QD-VHC16-16F 1 1QD-VHC20-20F 1-1/4 1-1/4QD-VHC24-24F 1-1/2 1-1/2QD-VHC32-32F 2 2QD-VHC40-40F 2-1/2 2-1/2QD-VHC48-48F 3 3


PART No. Body Size Male PipeQD-VHC4-2M 1/4 1/8QD-VHC4-4M 1/4 1/4QD-VHC6-6M 3/8 3/8QD-VHC8-8M 1/2 1/2QD-VHC12-12M 3/4 3/4QD-VHC16-16M 1 1QD-VHC40-40M 2-1/2 2-1/2QD-VHC48-48M 3 3


PART No. Body Size Female PipeQD-VHN4-2F 1/4 1/8QD-VHN4-4F 1/4 1/4QD-VHN6-6F 3/8 3/8QD-VHN8-8F 1/2 1/2QD-VHN12-12F 3/4 3/4QD-VHN16-16F 1 1QD-VHN20-20F 1-1/4 1-1/4QD-VHN24-24F 1-1/2 1-1/2QD-VHN32-32F 2 2QD-VHN40-40F 2-1/2 2-1/2QD-VHN48-48F 3 3


Part Body Size Male PipeQD-VHN4-2M 1/4 1/8QD-VHN4-4M 1/4 1/4QD-VHN6-6M 3/8 3/8QD-VHN8-8M 1/2 1/2QD-VHN12-12M 3/4 3/4QD-VHN16-16M 1 1QD-VHN40-40M 2-1/2 2-1/2QD-VHN48-48M 3 3

E

75.


VALVED COUPLER - BRASS

PART No. Body Size Female PipeQD-BVHC4-2F 1/4 1/8QD-BVHC4-4F 1/4 1/4QD-BVHC6-6F 3/8 3/8QD-BVHC8-8F 1/2 1/2QD-BVHC12-12F 3/4 3/4QD-BVHC16-16F 1 1QD-BVHC20-20F 1-1/4 1-1/4QD-BVHC24-24F 1-1/2 1-1/2

PART No. Body Size Male PipeQD-BVHC4-2M 1/4 1/8QD-BVHC4-4M 1/4 1/4QD-BVHC6-6M 3/8 3/8QD-BVHC8-8M 1/2 1/2QD-BVHC12-12M 3/4 3/4QD-BVHC16-16M 1 1

VALVED NIPPLE - BRASS

PART No. Body Size Female PipeQD-BVHN4-2F 1/4 1/8QD-BVHN4-4F 1/4 1/4QD-BVHN6-6F 3/8 3/8QD-BVHN8-8F 1/2 1/2QD-BVHN12-12F 3/4 3/4QD-BVHN16-16F 1 1QD-BVHN20-20F 1-1/4 1-1/4QD-BVHN24-24F 1-1/2 1-1/2

PART No. Body Size Male PipeQD-BVHN4-2M 1/4 1/8QD-BVHN4-4M 1/4 1/4QD-BVHN6-6M 3/8 3/8QD-BVHN8-8M 1/2 1/2QD-BVHN12-12M 3/4 3/4QD-BVHN16-16M 1 1

VALVED COUPLER - STAINLESS (316)

PART No. Body Size Female PipeQD-SVHC4-4F 1/4 1/4QD-SVHC6-6F 3/8 3/8QD-SVHC8-8F 1/2 1/2QD-SVHC12-12F 3/4 3/4QD-SVHC16-16F 1 1QD-SVHC20-20F 1-1/4 1-1/4QD-SVHC24-24F 1-1/2 1-1/2QD-SVHC32-32F 2 2QD-SVHC40-40F 2-1/2 2-1/2QD-SVHC48-48F 3 3

PART No. Body Size Male PipeQD-SVHC4-4M 1/4 1/4QD-SVHC6-6M 3/8 3/8QD-SVHC8-8M 1/2 1/2QD-SVHC12-12M 3/4 3/4QD-SVHC16-16M 1 1

VALVED NIPPLE - STAINLESS (316)

PART No. Body Size Female PipeQD-SVHN4-4F 1/4 1/4QD-SVHN6-6F 3/8 3/8QD-SVHN8-8F 1/2 1/2QD-SVHN12-12F 3/4 3/4QD-SVHN16-16F 1 1QD-SVHN20-20F 1-1/4 1-1/4QD-SVHN24-24F 1-1/2 1-1/2QD-SVHN32-32F 2 2QD-SVHN40-40F 2-1/2 2-1/2QD-SVHN48-48F 3 3

PART No. Body Size Male PipeQD-SVHN4-4M 1/4 1/4QD-SVHN6-6M 3/8 3/8QD-SVHN8-8M 1/2 1/2QD-SVHN12-12M 3/4 3/4QD-SVHN16-16M 1 1

PLAIN COUPLER - STEEL

PART No. Body Size Female PipeQD-PHC4-4F 1/4 1/4QD-PHC6-6F 3/8 3/8QD-PHC8-8F 1/2 1/2QD-PHC12-12F 3/4 3/4QD-PHC16-16F 1 1QD-PHC20-20F 1-1/4 1-1/4QD-PHC24-24F 1-1/2 1-1/2QD-PHC32-32F 2 2QD-PHC40-40F 2-1/2 2-1/2QD-PHC48-48F 3 3

PLAIN NIPPLE- STEEL

PART No. Body Size Female PipeQD-PHN4-2F 1/4 1/8QD-PHN4-4F 1/4 1/4QD-PHN6-6F 3/8 3/8QD-PHN8-8F 1/2 1/2QD-PHN12-12F 3/4 3/4QD-PHN16-16F 1 1QD-PHN20-20F 1-1/4 1-1/4QD-PHN24-24F 1-1/2 1-1/2QD-PHN32-32F 2 2QD-PHN40-40F 2-1/2 2-1/2QD-PHN48-48F 3 3

SNAPTITE “VH” (VALVED) SERIES

• MALE NIPPLE ON NEXT PAGE.

SNAPTITE “PH” (NON-VALVED) SERIES

E

76.


PLAIN NIPPLE - STEEL

PART No. Body Size Male PipeQD-PHN4-2M 1/4 1/8QD-PHN4-4M 1/4 1/4QD-PHN6-6M 3/8 3/8QD-PHN8-8M 1/2 1/2QD-PHN12-12M 3/4 3/4QD-PHN16-16M 1 1

SNAPTITE “PH” (NON-VALVED) SERIES

NON-VALVED COUPLER - BRASS

PART No. Body Size Female PipeQD-BPHC4-4F 1/4 1/4

QD-BPHC6-6F 3/8 3/8

QD-BPHC8-8F 1/2 1/2

QD-BPHC12-12F 3/4 3/4

QD-BPHC16-16F 1 1

QD-BPHC20-20F 1-1/4 1-1/4

QD-BPHC24-24F 1-1/2 1-1/2

NON-VALVED COUPLER - STAINLESS (316)

PART No. Body Size Female PipeQD-SPHC4-4F 1/4 1/4

QD-SPHC6-6F 3/8 3/8

QD-SPHC8-8F 1/2 1/2

QD-SPHC12-12F 3/4 3/4

QD-SPHC16-16F 1 1

QD-SPHC20-20F 1-1/4 1-1/4

QD-SPHC24-24F 1-1/2 1-1/2

QD-SPHC32-32F 2 2

QD-SPHC40-40F 2-1/2 2-1/2

QD-SPHC48-48F 3 3

NON-VALVED NIPPLE - BRASS

PART No. Body Size Female PipeQD-BPHN4-2F 1/4 1/8QD-BPHN4-4F 1/4 1/4QD-BPHN6-6F 3/8 3/8QD-BPHN8-8F 1/2 1/2QD-BPHN12-12F 3/4 3/4QD-BPHN16-16F 1 1QD-BPHN20-20F 1-1/4 1-1/4QD-BPHN24-24F 1-1/2 1-1/2

PART No. Body Size Male PipeQD-BPHN4-2M 1/4 1/8QD-BPHN4-4M 1/4 1/4QD-BPHN6-6M 3/8 3/8QD-BPHN8-8M 1/2 1/2

NON-VALVED NIPPLE - STAINLESS (316)

PART No. Body Size Female PipeQD-SPHN4-4F 1/4 1/4QD-SPHN6-6F 3/8 3/8QD-SPHN8-8F 1/2 1/2QD-SPHN12-12F 3/4 3/4QD-SPHN16-16F 1 1QD-SPHN20-20F 1-1/4 1-1/4QD-SPHN24-24F 1-1/2 1-1/2QD-SPHN32-32F 2 2QD-SPHN40-40F 2-1/2 2-1/2QD-SPHN48-48F 3 3

PART No. Body Size Male PipeQD-SPHN4-4M 1/4 1/4QD-SPHN6-6M 3/8 3/8QD-SPHN8-8M 1/2 1/2

Plastic Plastic Aluminum Aluminum Nipple Seal Steel Coupler Steel NippleSize Dust Cap Dust Plug Dust Plug Dust Cap (U-Packer) Valve Kit Valve Kit1/4 QD-PDC-4 QD-PDP-4 QD-AMPH-4 QD-ADCH-4 QD-H4-56A QD-H4-40 QD-H4-413/8 QD-PDC-6 QD-PDP-6 QD-AMPH-6 QD-ADCH-6 QD-H6-56A QD-H6-40 QD-H6-411/2 QD-PDC-13 QD-PDP-11 QD-AMPH-8 QD-ADCH-8 QD-H8-56A QD-H8-40 QD-H8-413/4 QD-PDC-15 QD-PDP-14 QD-AMPH-12 QD-ADCH-12 QD-H12-56A QD-H12-40 QD-H12-411 QD-PDC-16 QD-PDP-16 QD-AMPH-16 QD-ADCH-16 QD-H16-56A QD-H16-40 QD-H16-41

1-1/4 QD-AMPH-20 QD-ADCH-20 QD-H20-56A QD-H20-40 QD-H20-411-1/2 QD-AMPH-24 QD-ADCH-24 QD-H24-56A QD-H24-40 QD-H24-41

2 QD-AMPH-32 QD-ADCH-32 QD-H32-56A QD-H32-40 QD-H32-412-1/2 QD-AMPH-40 QD-ADCH-40 QD-H40-56A

3 QD-AMPH-48 QD-ADCH-48 QD-H48-56A

“VH” AND “PH” SERIES ACCESSORIES

E

77.


AEROQUIP FD51 SERIES INTERCHANGE

• Interchangeable with Aeroquip 5100 series and Parker 6100 series.• Heavy duty wing nut or hex nut for easy connection.• Thread-To-Connect.• Dry-Break feature minimizes air inclusion and contamination of

systems.• Up to 3,000 PSI connected and disconnected.• Ideal for use on hydraulic dump trucks, coal trucks, sand and saltspreaders and oil well equipment.

Operating Pressure Air Inclusion SpillageSize (PSI) CC. Max. CC. Max.3/4 3000 .34 .261 3000 .50 .35

1-1/4 2750 .68 .701-1/2 2750 .60 .94

VALVED COUPLER - BRASS

PART No. Body Size Female PipeQD-BTTWC12-12F 3/4 3/4QD-BTTWC16-16F 1 1QD-BTTWC20-20F 1-1/4 1-1/4QD-BTTWC24-24F 1-1/2 1-1/2

VALVED NIPPLE - BRASS

PART No. Body Size Female PipeQD-BTTWN12-12F 3/4 3/4QD-BTTWN16-16F 1 1QD-BTTWN20-20F 1-1/4 1-1/4QD-BTTWN24-24F 1-1/2 1-1/2

VALVED COUPLER KITS - BRASS

PART No. Body SizeQD-BTTWC12-SPK 3/4QD-BTTWC16-SPK 1QD-BTTWC20-SPK 1-1/4QD-BTTWC24-SPK 1-1/2

VALVED NIPPLE KITS - BRASS

PART No. Body SizeQD-BTTWN12-SPK 3/4QD-BTTWN16-SPK 1QD-BTTWN20-SPK 1-1/4QD-BTTWN24-SPK 1-1/2

AEROQUIP FD51 INTERCHANGE ACCESSORIES

AEROQUIP FD51 INTERCHANGE SPARE PARTS KITS

BRASSDUSTPLUG

MOUNTINGFLANGE

PART No. SizeQD-BTTWDC-12 3/4QD-BTTWDC-16 1QD-BTTWDC-20 1-1/4QD-BTTWDC-24 1-1/2

PART No. SizeQD-BTTWDP-12 3/4QD-BTTWDP-16 1QD-BTTWDP-20 1-1/4QD-BTTWDP-24 1-1/2

PART No. SizeQD-TTWF-12 3/4QD-TTWF-16 1QD-TTWF-20 1-1/4

BRASSDUSTCAP

E

78.

THREAD-TO-CONNECT (CONNECT UNDER PRESSURE)


PART No. Body Size Female PipeQD-75C12-12F 3/4 3/4QD-75C16-16F 1 1QD-75C20-20F 1-1/4 1-1/4QD-75C24-24F 1-1/2 1-1/2QD-75C32-32F 2 2QD-75C40-40F 2-1/2 2-1/2QD-75C64-64F 4 4


PART No. Body Size Female PipeQD-75N12-12F 3/4 3/4QD-75N16-16F 1 1QD-75N20-20F 1-1/4 1-1/4QD-75N24-24F 1-1/2 1-1/2QD-75N32-32F 2 2QD-75N40-40F 2-1/2 2-1/2QD-75N64-64F 4 4

DUST PLUGS AND CAPSSize Dust Plug Dust Cap3/4 QD-75MDP-12 QD-75MDC-121 QD-75MDP-16 QD-75MDC-16

1-1/4 QD-75MDP-20 QD-75MDC-201-1/2 QD-75MDP-24 QD-75MDC-24

2 QD-75MDP-32 QD-75MDC-322-1/2 QD-75MDP-40 QD-75MDC-40

4 QD-75MDP-64 QD-75MDC-64

SPARE PARTS KITSSize Coupler Kit Nipple Kit3/4 QD-75C12-SPK QD-75N12-SPK1 QD-75C16-SPK QD-75N16-SPK

1-1/4 QD-75C20-SPK QD-75N20-SPK1-1/2 QD-75C24-SPK QD-75N24-SPK

2 QD-75C32-SPK QD-75N32-SPK2-1/2 QD-75C40-SPK QD-75N40-SPK

4 QD-75C64-SPK QD-75N64-SPK

• Connect under pressure - designed for up to 5,000 PSI

operating pressures.

• Thread-To-Connect valves shut off automatically during

connection under normal circumstances.

• Superior flow and low pressure drop.

• Large capacity.


3/4 1 1-1/4 1-1/2 2 2-1/2 4

STEEL 5000 5000 5000 5000 5000 3000 400

THREAD-TO-CONNECT ACCESSORIES


E

79.

• Liquid Gauge • #304 Stainless Steel Case • 1.5% Full Scale Accuracy• Operating Temperature: - 40°F To + 140°F, -20°C To +60°C • Meets ASME B40.100 Standards

1/4 M.P.T. STEM MOUNT (2.5" DIAL)

1/4 M.P.T. STEM MOUNT (4" DIAL)

1/4 M.P.T. CENTER BACK MOUNT

LIQUID FILLED PRESSURE GAUGES

1/4 M.P.T. STEM MOUNT (4" DIAL)ALL STAINLESS STEEL (316)

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-30SG4 4 0-30 0-200PG-60SG4 4 0-60 0-400PG-100SG4 4 0-100 0-700PG-160SG4 4 0-160 0-1100PG-200SG4 4 0-160 0-1400PG-300SG4 4 0-300 0-2100

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-1000SG4 4 0-1000 0-7000PG-1500SG4 4 0-1500 0-10000PG-3000SG4 4 0-3000 0-21000PG-5000SG4 4 0-5000 0-35000PG-10000SG4 4 0-10000 0-70000

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-60SG4SS 4 0-60 0-400PG-100SG4SS 4 0-100 0-700

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-15SG25 2.5 0-15 0-100PG-30SG25 2.5 0-30 0-200PG-60SG25 2.5 0-60 0-400PG-100SG25 2.5 0-100 0-700PG-100SG25LT 2.5 0-100 0-700PG-160SG25 2.5 0-160 0-1100PG-160SG25LT 2.5 0-160 0-1100PG-200SG25 2.5 0-200 0-1400PG-300SG25 2.5 0-300 0-2100

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-400SG25 2.5 0-400 0-2800PG-600SG25 2.5 0-600 0-4000PG-1000SG25 2.5 0-1000 0-7000PG-1500SG25 2.5 0-1500 0-10000PG-2000SG25 2.5 0-2000 0-14000PG-3000SG25 2.5 0-3000 0-21000PG-5000SG25 2.5 0-5000 0-35000PG-10000SG25 2.5 0-10000 0-70000

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-15CG25 2.5 0-15 0-100PG-30CG25 2.5 0-30 0-200PG-60CG25 2.5 0-60 0-400PG-100CG25 2.5 0-100 0-700PG-100CG25LT 2.5 0-100 0-700PG-160CG25 2.5 0-160 0-1100PG-160CG25LT 2.5 0-160 0-1100PG-200CG25 2.5 0-200 0-1400PG-300CG25 2.5 0-300 0-2100

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)PG-400CG25 2.5 0-400 0-2800PG-600CG25 2.5 0-600 0-4000PG-1000CG25 2.5 0-1000 0-7000PG-1500CG25 2.5 0-1500 0-10000PG-2000CG25 2.5 0-2000 0-14000PG-3000CG25 2.5 0-3000 0-21000PG-5000CG25 2.5 0-5000 0-35000PG-10000CG25 2.5 0-10000 0-70000

(“LT” -76°F To + 140°F, -60°C To +60°C Low Temp)

(“LT” -76°F To + 140°F, -60°C To +60°C Low Temp)

F

80.

1/4 M.P.T. STEM MOUNTWITH FACTORY FLANGE

VACUUM SERVICE1/4 M.P.T. STEM MOUNT

VACUUM SERVICE1/4 M.P.T. CENTER BACK MOUNT

MOUNTING BRACKETS

SNUBBER

GAUGE PROTECTOR COVER

PG-MB252 SCREW U-CLAMP

(For Use With Center BackOr Stem Mount Gauges.)

PG-PM253 HOLE PANEL MOUNT

(Only For Use With CenterBack Mount Gauges.)

• Brass 1/4" Female x 1/4" Male

• Protects gauges from shock.

• Operating Temperature: - 65°F To + 650°F

- 54°C To + 343°C

• Liquid Gauge • #304 Stainless Steel Case • 1.5% Full Scale Accuracy • Operating Temperature: - 40°F To + 140°F, -20°C To + 60°C • Meets ASME B40.100 Standards

Dial RangeDiameter

PART No. (IN.) (P.S.I.) (kPa)

PG-30SGRF 4 0-30 N/A

PG-100SGRF 4 0-100 N/A

PG-160SGRF 4 0-160 N/A

Dial RangeDiameter

PART No. (IN.) Vacuum (P.S.I.)

PG-30SGV25 2.5 30-0 hg

PG-30V30SG25 2.5 30-0 hg 0-30

Dial RangeDiameter

PART No. (IN.) Vacuum (P.S.I.)

PG-30CGV25 2.5 30-0 hg

PG-30V30CG25 2.5 30-0 hg 0-30

For DialDiameter

PART No. (IN.) Description

PG-MB25 2.5 2 Screw U-Clamp

PG-PM25 2.5 3 Hole Panel Mount

RangePART No. (P.S.I.) Service

PG-SNUBBER * 0-10000 Heavy Oils

PG-SNUBBER-G 0-10000 Air and other Gases

PG-SNUBBER-W * 0-10000 Gasoline, Water, Light Oils

*Conforms to requirements of MIL-D-2940A

For DialDiameter

PART No. (IN.) Material Color

PG-RC25 2.5 Rubber Blue

PG-RC4 4.0 Rubber Blue

LIQUID FILLED PRESSURE GAUGES

PG-SNUBBER

PG-RC25

F

81.

G

42 BIN STORAGE CABINET

72 BIN STORAGE CABINET

PART No. 42-CA

This heavy gauge metal cabinet can be used for floor or wallmounting. It has 42 large compartments for easy access.Modular in design for easy addition.Label sets available.This cabinet is available in the color grey.

Overall: Height 42 inchesWidth 33-3/4 inchesDepth 12 inches

Bin Dimensions:

Size: Height 5-1/2 inchesWidth 5-3/8 inchesDepth 11-7/8 inches

PART No. 72-CA

This heavy gauge metal cabinet can be used for counter or wallmounting. It has 72 large compartments for easy access. Modular in design for easy addition.Label sets available.This cabinet is available in the color grey.

Overall: Height 42 inchesWidth 33-3/4 inchesDepth 12 inches

Bin Dimensions:

Size: Height 4-1/2 inchesWidth 4 inchesDepth 11-7/8 inches

• Counter / Wall Mounting Storage Cabinet for Fittings or Large Items

• Floor / Wall Mounting Storage Cabinetfor Fittings or Large Items

FITTING CABINETS

82.

G

TOOLS & ACCESSORIES

NYLON SLEEVE

• Reduces abrasions, increaseshose life.

Sleeve I.D.PART No. (IN.)NS-10 .67NS-14 .91NS-16 1.06NS-20 1.22NS-24 1.42NS-28 1.85NS-32 2.17NS-38 2.36NS-42 2.60NS-46 2.87NS-64 4.41

ROTO REEL

• Prevents kinking.• Reduces abrasions, increases

hose life.Spring I.D.

PART No. (IN.)SY-4521-50000 .463SY-4521-51000 .542SY-4521-83000 .572SY-4521-52000 .598SY-4521-84000 .632SY-4521-57000 .666SY-4521-53000 .705SY-4521-58000 .791SY-4521-54000 .841SY-4521-59000 .935SY-4521-55000 1.087SY-4521-88000 1.115SY-4521-60000 1.182SY-4521-56000 1.380SY-4521-61000 1.510

SPRING GUARD

PART No.RR12

Features:• The easy way to reel off hose.• Nominal load capacity is 1,000 LBS.• Rotates on precision ground ball

bearings.• Made of metal for durability.• Plated for rust resistance.• Shipped preassembled.

HOSE CUT-OFF BLADES FOR CUT-OFF MACHINES

BEVELEDEDGE

BLADEArborHole Blade

PART No. Diameter DiameterHCB-7 5/8" 7"HCB-8 5/8" 8"HCB-10 3/4" 10"

SCALLOPEDEDGE

BLADEArborHole Blade

PART No. Diameter DiameterHCBS-7 5/8" 7"HCBS-8 5/8" 8"HCBS-10 3/4" 10"

Sectional for multi-product storage...

PART No. DescriptionGS-STOCK BOX STANDARD

Dimensions: 5" W X 11" L X 4" D• Supplied Flat For Easy Storage

(Folding required)• Label sets available.

For bulk or large item storage...

PART No. DescriptionGS-STOCK BOX-2 DOUBLE

Dimensions: 10" W X 11" L X 4" D• Supplied Flat For Easy Storage


Non-sectional for one product storage...

PART No. DescriptionGS-STOCK BOX-1 SMALL

Dimensions: 2 3/4" W X 11" L X 4" D• Supplied Flat For Easy Storage


CARDBOARD STOCK BOXES

83.

G

SEPARATION TOOLSDEPTH MARKER

TOOLS & ACCESSORIES

Twin-Line Hose Separation Tool

PART No: SY-4574-01000• Designed for separating Twin-Line hose

Replacement Blades: (set of 10)PART No: SY-4574-02000Dies:PART No: SY-4574-03000-XXX

Deluxe Thread Gauge

PART No. Range

TGI 4 TO 42 T.P.I.

TGM .25 TO 2.50 MM

PART No.VCE

Features:• 4 way measurement.• English dial reads in 1/1000 Increments.• Measuring range up to 6 inches.

THREAD GAUGE

VERNIER CALIPER

HAND-HELD HOSE CUTTERO.D.

PART No. CapacitySY-4523-04006 1/2

Replacement BladeSY-4523-04005

• A handy tool for cutting hose 1/8inch to 1/2 inch in diameter.Blades are replaceable.Vinyl cushioned grips.

Multi-Line Hose Separation Tool

PART No: SY-4573-00000• Designed for Separation of 3, 4 and 5

line hoses.

Replacement Blades PART No: SY-4573-01000

Synflex® Hose Insertion Depth MarkerPART No: SY-45J0-04603

Synflex® Hose Vise BlocksPART No: SY-4504-00000• For 3/16 inch through 1/2 inch I.D. hose

PART No: SY-4504-01000• For 3/4 inch and 1 inch I.D. hose. Use in making

assemblies.

VISE BLOCKS

SWAGE LUBRICANT

PART No:SY-4545-01001

• A lubricant especially for use in assembly of Synflexreusable and permanently attached stainless steelcouplings.

84.

G

HOSE CRIMPERS

Synflex® HOSE COUPLING SWAGING MACHINES AND TOOLS

PUSHER AND DIE TOOLS FORSYNFLEX SWAGING MACHINE

Pushers• Pusher selection is based on coupling end design chosen

from assembly.

Example: To attach a 3/8 inch I.D. hose to a JIC 37°Female Swivel coupling with a –6 thread size PART No. SY-3903-06546, use pusherPART No. SY-4599-FP015

Dies• Swaging dies are applied in paired sets. Die selection is

based on hose series and size. Die part numbers arelisted in hose specification charts.Example: To attach coupling PART No. SY-3903-06546 toa series 3130 3/8 inch I.D. hose,use die PART No. SY-4540-306.

Die Pusher Storage Rack PART No. SY-45J0-03401• Rack holds 12 pushers and 8 dies. Welded 16 gauge steel

frame can be wall mounted or used on bench top. Rack is19 inches wide; 22-1/2 inches high; extends 3 inches frommounting surface.

Carrying Case forPortable Hand Swager SST

PART No. SY-45J0-04300

Mark IX

• Fully automatic; opens dies to release completed coupling assembly

• Fast actuation; capable of 5-second cycle time

• Three power supply options for a broad range of production needs

• Weight: 131 lbs (59.4kg). (option 1&2)

Option 1

PART No. SY-4530-009S01HP, 60Hz,115/208/230V Single Phase Motor; Medium Duty;

Option 2

PART No. SY-4530-009S11HP, 60 Hz,230/460 V Three Phase Motor; Medium Duty;

Option 3For Heavy Duty, continuous high speed production assembly, the MarkIX (a) can be equipped with a high capacity power unit (b)

(a) PART No. SY-4530-009S4

Mark IX swaging machine without standard power supply.

(b) PART No. SY-453C-00020

Commercial duty hydraulic power unit with 5HP three phase 230/460 volt motor, 5 gallon reservoir; 4.1 GPM displacement.

PART No. SY-4530-01002

• Portable hand operated machine for field assembly• Frame can be attached to bench vise or directly to a table

with separate mounting bracket• Weight: 8 lbs (3.6kg)

Designed to Attach Synflex Permanent Couplings to Synflex Hose• Synflex swaging equipment produces smooth, uniform coupling surfaces, without raised edges or ridges common in other

coupling methods. • Complete range of coupling swaging pushers and dies, up to –16 size are ordered separately.

Portable Hand SwagerSST

85.

HOSE CRIMPERS

HYDRAULIC CRIMPER

PART No. FF105

• Capacity: 1-1/4" 2 spiral hose to 1" 4 spiral hose.• Dimensions: 11.5" W, 21.5" D and 19" H.• Weight: 125 pounds.

• 1 HP 110V pump for fast crimps.• 35 Ton Hydraulic Cylinder.• Fully adjustable to accommodate a wide range of different hose and fittings

without the need for special shims or spacers• Automatic shut off assures precise crimps time after time.• Easily removable pusher and split dies make bent tube and special fittings easy

to get into the crimper.• The pneumatic remote switch can be operated anywhere with no electrical wires.

Die Set Die Closed Crimp FacePart No. Dia. IN. Dia. MM Length IN. Length MMP100D-14 0.551 14 1.73 44P100D-16 0.629 16 1.73 44P100D-20 0.787 20 1.73 44P100D-24 0.945 24 1.73 44P100D-27 1.060 27 2.24 57P100D-31 1.270 31 2.24 57P100D-34 1.340 34 2.24 57P100D-38 1.496 38 2.52 64

Comes complete with EightStandard Numbered Die Sets

* Die StandSold SeparatelyPart No.P100D-DIE RACK

Die Set Die Closed Crimp FacePart No. Dia. IN. Dia. MM Length IN. Length MM

P100D-42 1.65 42 2.24 57P100D-46 1.81 46 2.24 57P100D-50 1.96 50 2.24 57

Optional Die Sets Available

G

86.

FairviewPART No. WeatherHead Parker Dayco Imperial Gates OmniCrimp Aeroquip

SC600 T-400 NP-30 K-201 PC707 3000B FT1380T-407 NP-60 K-202T-410 K-401T-420 K-501T-440 K-601T-450 K-24T-460 K-16T-462 K-20

SCTGW600 T-400 NP-30 K-201 PC707 3000B FT1380T-407 NP-60 K-202T-410 K-401T-420 K-501T-440 K-601T-450 K-24T-460 K-16T-462 K-20

SC900 Minicrimp NP-30 K-201 PC707 3000B FT1380Karrykrimp 1 & 2 NP-60 K-202Parkrimp 1 & 2 K-401

PHastkrimp K-501K-601K-24K-16K-20

SCT900MS Karrykrimp 2 NP-30 K-201 PC707 3000B FT1380Parkrimp 2 NP-60 K-202PHastkrimp K-401

K-501K-601K-24K-16K-20

SCTBW00 NP-30 K-201 PC707 3000B FT1380NP-60 K-202K-401

K-501K-601K-24K-16K-20

CRIMPER COMPATIBILITY CHART

Any other adjustable crimper not shown.

G

NPTF O-Ring Face SealDash 37° S.A.E. Male Female Female Pipe O-Ring Boss Adjusting FlarelessSize Male Swivel Pipe Pipe Swivel Male Female Studs Studs Tube

-4 20000 18000 20000 20000 18000 20000 20000 24000 24000 20000-5 20000 16000 - - - 20000 20000 - - 20000-6 20000 16000 16000 16000 16000 20000 20000 24000 24000 16000-8 18000 16000 12000 12000 16000 18000 18000 24000 24000 12000-10 14000 12000 - - - 14000 14000 24000 24000 12000-12 14000 12000 10000 10000 12000 14000 14000 24000 24000 10000-14 12000 10000 - - - 12000 12000 - - 10000-16 12000 10000 8000 8000 10000 12000 12000 24000 20000 8000-20 10000 8000 4600 4600 8000 10000 10000 16000 16000 4600-24 8000 6000 4000 4000 6000 8000 8000 16000 12000 4000-32 6000 4500 4000 4000 4500 6000 - - - 4000

-4 5000 4500 5000 5000 4500 5000 5000 6000 6000 5000-5 5000 4000 - - - 5000 5000 - - 5000-6 5000 4000 4000 4000 4000 5000 5000 6000 6000 4000-8 4500 4000 3000 3000 4000 4500 4500 6000 6000 3000-10 3500 3000 - - - 3500 3500 6000 6000 3000-12 3500 3000 2500 2500 3000 3500 3500 6000 6000 2500-14 3000 2500 - - - 3000 3000 - - 2500-16 3000 2500 2000 2000 2500 3000 3000 6000 5000 2000-20 2500 2000 1150 1150 2000 2500 2500 4000 4000 1150-24 2000 1500 1000 1000 1500 2000 2000 4000 3000 1000-32 1500 1125 1000 1000 1125 1500 - - - 1000

OPERATING AND BURST PRESSURESOF HYDRAULIC FITTINGS

NPTF O-Ring Face SealDash 37° S.A.E. Male Female Female Pipe O-Ring Boss Adjusting FlarelessSize Male Swivel Pipe Pipe Swivel Male Female Studs Studs Tube

MAXIMUM OPERATING (P.S.I.)

MINIMUM BURST (P.S.I.)

NOTE: If a fitting has multiple ends, (i.e. 1/2 male pipe to 3/8 male pipe) or one or more differentstyle ends, (i.e. O-ring boss to male pipe threads.), it is recommended that the lower pressure ofthe two end styles must be recognized as the working pressure rating for that fitting.

87.

G

88.

42-CA 8272-CA 82725 39725SW 39726 39

727 39728 39729 39730 39731 39

732 39735 39736 39737 39738 39

739 39760 11761 11BV 67 & 68FF105 85

GS-STOCK 81HCB 81HR3 5HR4 5HR5 6

HR5HT 6HR16 9HR17 9HRA12 7HRA13 8

HRA4SH 7HRT1 3 - 4HRT2 3 - 4HT- 8NS 81

P100D 85PG- 79 & 80QD-71 73QD-75 78QD-ADCH 76

QD-AGC 71QD-AGN 71QD-AMPH 76QD-BISOB 70QD-BPH 76

QD-BTTW 77QD-BVH 75QD-H* 76QD-HTMA 73QD-ISOA 72

QD-ISOB 70QD-PDC 70 - 72, 76QD-PDP 70 - 72, 76QD-PHC 75QD-PHN 75 - 76

QD-SISOB 70QD-SP90 71QD-SPH 76QD-SVH 75QD-TC 72

QD-TTWF 77QD-VH 74RR12 81S1000 62S1001 63

S1001M 63S1002 63S1003 61S1004 63S1005 63

S1005M 63S1006 63S1006M 63S1007 63S1008 63

S1009 61S1010 61S1012 61S1013 62S1016 62

S1016SW 62S1018 61S1020 61S1021 61S1022 61

S1024 63S1099 62S1099SW 62S1100 64S1101 65

S1103 64S1105 64S1106 65S1111 65S1116 64

S1116L 64S1120 64S1124 64S1125 36S1139 36

S1140 36S3516 45S3520 45S3522 45S3526 45

S3535 45S3542 45S3545 46S3548 45S3549 45

S3549BT 46S3549LBT 46S3550 45S3551 46S3554 46

S3554BT 46S3599 46S3616 55S3618 55S3618MM 66

S3620 54S3621 55S3621MM 66S3622 54S3622F 54

S3623 54S3631BMM 66S3631N 55S3631R 55S3631VO 55

S3642 55S3645 56S3648 54S3648L 55S3649 55

S3649EL 56S3649EEL 56S3649L 55S3651 56S3654 56

S3655 56S3699 56S3700BT 51S3700BT62 51S3705 49

S3719 47S3720 47S3721 47S3735 47S3735S 47

S3736 49S3737 50S3737F 50S3740BT 51S3740BT62 51

S3742 47S3742H 47S3744 50S3744F 50S3745 50

S3745F 50S3745M 50S3746 47S3748 48S3748BSPP 66

S3748BSPT 66S3748HM 66S3748KM 66S3748KOB 66S3748LM 66

S3748MM 66S3749 48S3749BSPP 66S3749BSPT 66S3749EEL 49

S3749EL 48S3749L 48S3749MM 66S3749SW 49S3750 49

S3751 50S3752 50S3753 50S3754 49S3754F 49

S3755 49S3756 48S3758 48S3790BT 51S3790BT62 51

S3831N 53S3842 53S3845 53S3846 53S3848 53

S3851 53S3854 53S3855 53S3924 58S3931N 58

S3931R 58S3935 57S3937 57S3937F 57S3942 57

S3942BH 57S3944 59S3944BH 59S3945 59S3945F 59

S3947 58S3948 57S3949 58S3951F 59S3952 59

S3954 59S3954BH 59S3955 58S3955BH 58S3956 58

S3958 57S3968 57S3968L 57S3969 58S3969F 58

S3971 59S3972 59S3974 59S3999 58S6760 60

S6761 60S6762 60S6764 60S6765 60S6766 60

S6768 60S6769 60SC600 86SC616SW 24SC625 23

SC625SW 23SC626 23SC626GT 23SC626SW 23SC627 23

SC628 23SC629 24SC631 25SC632 25SC635 23

SC636 24SC637 23SC638 23SC639 24SC639L 25

SC640 25SC641 25SC642 25SC643 23SC643SW 23

SC650 25SC653 23SC658 24SC659 25SC659L 25

SC667 24SC900 86SC916SW 27SC925 26SC925BSP 27

SC925SW 26SC926 26SC926GT 26SC926SW 26SC927 26

SC928 26SC929 27SC931 28SC931BSP 27SC931HM 27

SC931JIS 27SC931KM 27SC931LM 27SC932 28SC935 26

SC936 27SC937 26SC938 26SC939 27SC939BSP 28

SC939HM 28SC939L 28SC939LM 28SC940 28SC940BSP 28

SC940HM 28SC940LM 28SC941 28SC942 28SC943 26

SC943BSP 27SC943HM 27SC943LM 27SC943SW 26SC950 28

SC953 26SC958 26SC959 28SC959L 28SC967 27

SCAJ00MS 30SCAJ25MS 30SCAJ37MS 30SCAJ38MS 30SCAJ39MS 30

SCAJ40MS 30SCAJ45MS 30SCAJ50MS 30SCAJ58MS 30SCAJ59MS 30

SCAJ90MS 30SCK625BSP 24SCK631BSP 24SCK631HM 24SCK631JIS 24

SCK631KM 24SCK631LM 24SCK639BSP 25SCK639HM 25SCK639LM 25

SCK643BSP 24SCT425 37SCT426SW 37SCT428 37SCT435 37

SCT438 37SCT439 37SCT440 37SCT441 37SCT442 37

SCT445 37SCT462 37SCT468 37SCT495 37SCT900MS 29, 86

SCT900MS62 29SCT925BSPMS 30SCT925MS 29SCT931BSPMS 30SCT937MS 29

SCT938MS 29SCT939MS 29SCT940MS 29SCT943MS 29SCT945MS 29

SCT945MS62 29SCT950MS 29SCT953MS 29SCT958MS 29SCT959MS 29

SCT990MS 29SCT990MS62 30SCTBW 33SCTBW00 86SCTGW 31 & 32

SCTGW600 86SCV1003 78SFK61 52SFK62 52SFO 52

SFPK2661 52SFPK2662 52SFPK3461 52SFPK3462 52SFPKW61 52

SFPKW62 52SO1116 65SO1120 65SO1124 65SO1125 36

SO1139 36SO1140 36SR4S 38SR425 38SR428 38

SR435 38SR438 38SR439 38SR440 38SR462 38

SR468 38SR525 35SR527 35SR528 35SR535 35

SR537 35SR538 35SR539 35SR539L 35SR540 35

SR541 35SR543 35SR545 35SR595 35SRH538 35

SRT125 34SRT137 34SRT138 34SRT225 34SRT237 34

SRT238 34SRT239 34SY-30CT 17SY-3130 13SY-3360 20

SY-3580 12SY-3770 13 - 17SY-37AL 14SY-3901 40SY-3903 40 & 41

SY-390H 42 & 43SY-390N 43SY-3E80 16SY-3R30 12SY-3R80 15

SY-3V10 18SY-3VE0 19SY-4504 84SY-4521 81SY-4523 84

SY-4530 83SY-453C-00020 83SY-4540 83SY-4545-01001 84SY-4573 84SY-4574 84

SY-4599 83SY-45J0 83 & 84T1 3T1SN 4

T2 3T2SN 4TGI 84TGM 84VCE 84

INDEXPART No. Page PART No. Page PART No. Page PART No. Page PART No. PagePART No. Page

WAREHOUSE/SALES LOCATIONS

• 206-3765 E. 1st AVENUEBURNABY, B.C. V5C 3V6PHONE: (604) 294-4427 FAX: (604) 294-9922TOLL FREE: (888) 294-7104 FAX: (888) 294-7105EMAIL: [email protected]

• UNIT 13 - 4069 112th AVENUE S.E.CALGARY, ALBERTA T2C 0J4PHONE: (403) 255-1524 FAX: (403) 259-6994TOLL FREE (888) 832-0550 FAX: (888) 832-0551EMAIL: [email protected]

• 9811 - 12th AVENUE S.W.EDMONTON, ALBERTA T6X 0E3PHONE: (780) 438-2177 FAX: (780) 437-0691TOLL FREE: (888) 441-9883 FAX: (888) 441-9884EMAIL: [email protected]

• 3327 LAMBERT CRESCENT, UNIT 1 SASKATOON, SASKATCHEWAN S7K 1K4PHONE: (306) 978-1800 FAX: (306) 978-1898TOLL FREE: (866) 866-9198 FAX: (866) 978-1898EMAIL: [email protected]

• 310 KEEWATIN STREETWINNIPEG, MANITOBA R2X 2R9PHONE: (204) 633-9304 FAX: (204) 632-9656TOLL FREE: (888) 290-3821 FAX: (888) 373-0913EMAIL: [email protected]

• 441 ATTWELL DRIVETORONTO, ONTARIO M9W 5C4PHONE: (416) 675-3525 FAX: (416) 675-5678TOLL FREE: (800) 800-4018 FAX: (888) 419-3965EMAIL: [email protected]

• 2955 RUE LUCIEN-L'ALLIERLAVAL, QUEBEC H7P 0A1PHONE: (450) 978-3341 FAX: (450) 686-9533TOLL FREE: (800) 663-3341 FAX: (800) 499-3035EMAIL: [email protected]

• 683 MALENFANT BLVD. DIEPPE (MONCTON), NEW BRUNSWICK E1A 5T8PHONE: (506) 857-1115 FAX: (506) 857-9206TOLL FREE: (800) 561-8551 FAX: (800) 862-4374EMAIL: [email protected]

• 40 GLOSTER COURTDARTMOUTH, NOVA SCOTIA B3B 1X9PHONE: (902) 468-1634 FAX: (902) 468-1846TOLL FREE: (877) 824-6828 FAX: (877) 661-3346EMAIL: [email protected]

Gas-Flo® & Accutek® Are registered trademarks ofFairview FFittings & Manufacturing Ltd.

www.fairviewfittings.com® ®

FAIRVIEW FITTINGS & Manufacturing Limited• Head Office:449 Attwell Drive,

Toronto, Ontario M9W 5C4Telephone: (416) 675-4233

Fax: (416) 675-9416E-Mail: [email protected]

www.fairviewfittings.com

FAIRVIEW FITTINGS & Manufacturing Incorporated• Head Office: 3777 Commerce Court,

Wheatfield, New York 14120 U.S.A.Telephone: (716) 614-0320

CONTINENTAL USA:(800) 688-4088Sales Fax: (716) 614-0329 Admin. Fax: (716) 614-0327

E-Mail: [email protected]

U.S.A. Locations

Canadian Locations

HYDRAULIC PRODUCTS®

• 3777 COMMERCE COURTWHEATFIELD, NEW YORK 14120PHONE: (716) 614-0320 FAX: (716) 614-0329CONTINENTAL U.S.A.: (800) 688-4088

• 22 PROSPECT STREET, UNITS 3 & 4WOBURN, MASSACHUSETTS 01801PHONE: (781) 932-1392 FAX: (781) 932-8148CONTINENTAL U.S.A.: (800) 695-3101

• 3412 COUNTY RD. 6 E, UNIT 3ELKHART, IN 46514PHONE: (574) 206-8884 FAX: (574) 206-8444CONTINENTAL U.S.A.: (877) 459-0700

69

Go Leafs Go

®

ACTUAL OUTSIDE DIAMETERS OF PIPE THREADS ACTUAL OUTSIDE DIAMETERS OF TUBE

1/82

3/163

1/44

5/165

3/86

7/167

1/28

5/810

3/412

7/814

116

1-1/420

1-1/224

232

2-1/240

348

464

1/161

1/8A

1/4B

3/8C

1/2D

3/4E

1H

1 1/4J

1 1/2K

2M

2-1/2N

3P

4S

FRACTIONAL SIZE CODESUsed with all Part Numbers to designate Tube and Pipe Fractional Sizes.Tube Size Code -- 1/16ths

Pipe Size Code

M 2 NPT11 1/2 T.P.I.

A 1/8 NPT27 T.P.I.

B 1/4 NPT18 T.P.I.

C 3/8 NPT18 T.P.I.

J 1-1/4 NPT11 1/2 T.P.I.

E 3/4 NPT14 T.P.I.

D 1/2 NPT14 T.P.I.

K 1-1/2 NPT11 1/2 T.P.I.

H 1 NPT11 1/2 T.P.I.

5/8" 3/4" 7/8" 1"

1/8" 3/16" 1/4" 5/16" 3/8" 1/2"

DASHSIZE

-2-3-4-5-6-8

-10-12-14-16-20-24-32

O.D.TUBE SIZE

1/83/161/4

5/163/81/25/83/47/81

1-1/41-1/2

2

O.D.

5/163/8

7/161/25/83/47/8

1-1/161-1/41-3/8

------

THREAD

24242020181614141212------

O.D.

5/163/8

7/161/2

9/163/47/8

1-1/161-3/161-5/161-5/81-7/82-1/2

THREAD

24242020181614121212121212

O.D.

5/163/8

7/161/2

9/165/8

11/1613/16

11-1/81-1/4

----

THREAD

2424242424242018181816----

O.D.

5/163/8

7/161/25/8

11/163/47/8

1-1/161-3/16

------

--THREAD

28242420181818181616------

O.D.

5/163/8

7/161/2

9/165/8

11/16------------

THREAD

24242420201816------------

45° S.A.E. FLARE 37° J.I.C. FLARE COMPRESSION 45° INVERTED FLARE THREADED SLEEVE

DASHSIZE

-2-3-4-5-6-8

-10-12-14-16-20-24-32

O.D.TUBE SIZE

1/83/161/4

5/163/81/25/83/47/81

1-1/41-1/2

2

O.D.

5/163/8

7/161/2

9/163/47/8

1-1/161-3/161-5/161-5/81-7/82-1/2

THREAD

24242020181614121212121212

O.D.

5/163/8

7/161/2

9/163/47/8

1-1/161-3/161-5/161-5/81-7/82-1/2

THREAD

24242020181614121212121212

O.D.

----

9/16--

11/1613/16

11-3/16

--1-7/161-11/16

2--

THREAD

----18--161614 12--121212--

O.D.

----

1/4--

3/81/25/83/4--1------

THREAD

----19

19141414

11

O.D.

----

1/4--

3/81/25/83/4--1------

THREAD

----19--19141414

11

TUBE FITTING SIZE AND THREAD STANDARDSO-RING BOSS FLARELESS O-RING FACE SEAL BRITISH PIPE TAPER BRITISH PIPE PARALLEL

TUBE SIZEMM

68

1012141516182022252830353842

DIN METRIC(LIGHT)

M12x1.5M14x1.5M16x1.5M18x1.5

--M22x1.5

--M26x1.5

--M30x2.0

--M36x2.0

--M45x2.0

--M52x2.0

DIN METRIC(HEAVY)

M14x1.5M16x1.5M18x1.5M20x1.5M22x1.5

--M24x1.5

--M30x2.0

--M36x2.0

--M42x2.0

--M52x2.0

--

METRIC THREAD STANDARDS

TUBE FITTING SIZE AND THREAD STANDARDS

SIZING CHARTS

Date post:	18-Feb-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

1 TO 20 FAIRVIEW - Hose & Fittings Canada Inc. · 2018-10-02 · Water quality can significantly...

Documents