+ All Categories
Home > Documents > 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

Date post: 16-Dec-2015
Category:
Upload: darrell-lane
View: 228 times
Download: 2 times
Share this document with a friend
Popular Tags:
11
1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless
Transcript
Page 1: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

1

VIP 110-24 Release 2.1.0

“Anypoint”-to-Multipoint Wireless

Page 2: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

2

• All Electronics in Rugged Outdoor Unit

• Cable carries DC Power and Ethernet

• Dual Antenna Port• Antenna Alignment Port• VINE technology enabled• Web-Based Graphical Interface

PowerSupply~AC Ethernet

VIP 110-24 Ethernet Bridge

Page 3: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

3

• Overcomes Non-Line-of-Sight Issues• Low Up-Front Cost• Provides effective data throughput of 8 Mbps• Priority Queuing enables flexibility to control

bandwidth and maximize revenue intake.• Configured as a single piece, outdoor unit

reducing installation time, and eliminating cable loss

• Backbone is required only when capacity exceeds single VINE capacity

Key Competitive Advantages

Page 4: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

4

Installation Advantages

• Easy to Program (Configuration Scripts)• Built-in Spectrum Analyzer• Headphone / Audible Port for Antenna Alignment• Unisex design enables the units to be configured either

as a root, repeater or leaf node• Output power 7 times that of the competition. No

external amplifiers needed!• Spectral Efficiency

– 18 MHz bandwidth, 32 channels, 4 non-overlapping channels

• Low Power Consumption– 5 Watts

• Over-the-air Upgrades• Self Configuring Radios• RF Plug-and-Play

Page 5: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

5

New Features in Release 2.1.0

• Web Browser GUI• DHCP Client• VLAN Support• NTP Request• Security & Login Flexibility• Configuration Files• Auto-Configuration Scripts• Dynamic Power Control• Priority Transmission• Plug-and-Play• Email Alarms• Runtime & Uptime Clocks• Monitor Auto Acquire• Monitor Cycle

Page 6: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

6

New Products In VIP Family

• Leaf only Models: 2, 5.5 and 11 Mbps

– Lower speed leafs to match customer needs

– Lower prices to match market demands

– Upgrade cost is covered by customer’s increased needs.

– Leafs are upgradeable to full VINE functionality over the air with software key

0

2

4

6

8

10

12

Vine LeafHi

LeafMed

LeafLow

Leaf

Rptr

Root

Page 7: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

7

RF Plug-and-Play

Page 8: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

8

Internet

VIP 110-24 Solution

• Unique “Anypoint-to-Multipoint” architecture over comes line of sight limitations using patented VINE technology

• Outdoor unit offers quick installation

Page 9: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

9

Internet

Expansion with Backbone

• Cut one branch of VINE to create two VINEs• Install dedicated link between two roots• Backbone only required once capacity exceeds single

VINE capacity

Page 10: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

10

Key Advantages

• Low Up-Front Cost provides for gradual build out• Overcomes Non Line-of-Sight issues

– VINE Implementation

• Easy Deployment with Plug-and-Play– Radios self-configure, automatically detecting new nodes within

seconds of power up

• Long Range Links– Directive always used at one end of every link

• Bandwidth on Demand– Available bandwidth shared among active nodes only

• Network Management over the air– GUI Interface

Page 11: 1 VIP 110-24 Release 2.1.0 “Anypoint”-to-Multipoint Wireless.

11

Questions


Recommended