Date post: | 19-Dec-2015 |
Category: |
Documents |
View: | 217 times |
Download: | 0 times |
1
What is DEER?
Database for Energy Efficient Resources -A listing of residential and non-residential energy efficiency measures located at: http://eega.cpuc.ca.gov/deer/
DEER provides measure and building specific: Ex ante savings values: kW, kWh, kBtu; Measure costs; and Effective measure life (EUL)
2
Non-Weather Sensitive Residential Measures Include:
CFL Lighting
Refrigerators
Clothes Washers & Dryers
Dishwashers
Water Heating
Swimming Pool Pumps
3
Non-Weather Sensitive Res. Measures Residential CFL Savings
CFL savings impact = (delta watts/unit * hours/day * days/year * In Service Rate) / 1000 watts/kWh
CFL demand impact = delta watts/unit * In Service Rate * Peak Hour Load Share
The “In Service Factor” is an estimate of the percentage of lamps that are actually used. “Hours of
Operation/Day” and “Peak Hour Load Share” from KEMA CFL Metering Study.
For example (14W CFL replace 60W Inc):
CFL savings impact = 35.4 kWh (46W * 2.34 hours/day * 365 days/year * 0.9) / 1000 watts/kWh
CFL demand impact = 3.35 W 46W * 0.9 * 0.081
4
Non-Weather Sensitive Res. Measures Residential Water Heating Measures
High efficiency water heater (electric EF=0.93, gas EF=0.63)Heat pump water heater (EF=2.9)Point of use water heaterLow flow showerhead (from 2.5 to 2.0 gallons per minute)Pipe wrapFaucet aerators
Savings expressed as % of base useBase use varied by utility service area (same method as 2001)
5
Non-Weather Sensitive Non-Res. Measure Groups
Interior Lighting
Exterior Lighting
Cooking
Copy Machine
Water Heating
Vending Machine Controls
High Efficiency Motors
Agriculture
6
Non-Weather Sensitive Non-Res. Measures
Interior Lighting Group:CFL screw-in lampsCFL hardwire fixturesHigh intensity discharge (HID) lampsPremium T8 lampsDimming BallastsDe-lamping fluorescent 4 ft and 8 ft fixtures
7
Non-Weather Sensitive Non-Res. Measures
Exterior Lighting & Exit Signs Methods
HID lamps: delta watts saved * hours of use (4,100 hours) no peak impacts
Exit Signs: delta watts saved * 8760 hours * Interactive Effects peak = delta watts * Interactive effects * 1.0 (coincidence factor)
Timeclocks & Photocells: watts controlled * hours of control no peak impacts
8
Weather Sensitive MeasuresMethods Used
Employed DOE-2/eQUEST heat load simulation model
• Hourly simulation of all elements
• Includes details of configurations
Measures include high efficiency AC, furnaces, controls, shell measures, and maintenance (for single family, multi family, mobile homes and 22 non-res. building types, in each of 5 building vintages, for 16 climate zones).
9
Weather Sensitive MeasuresCalibration
Residential
• Residential Appliance Saturation Survey (RASS) used to calibrate end-use values
Non-residential
• Adjustments both at “activity area” and whole building level using preliminary Commercial Energy Use Survey (CEUS) values and values from EM&V studies
10
Weather Sensitive MeasuresSimulation cases
Base case
• Vintage typical base on survey data
Code base Case
• Minimally compliant or standard practice
Measure Case
• Most common program tier's
11
Overview of 2001-2005 Data Changes
The scope of some measures has been expanded• CFL size categories expanded• More evaporative cooler options• Windows expanded to include non-res. high performance glazing
Several measures eliminated or reduced in scope• Most T8 systems eliminated with the exception of premium efficiency and
dimming T8 ballasts• Eliminated coin-operated high efficiency clothes washers and hot water heater
tank wrap
Major changes in savings for some measures• Programmable thermostats• CFLs• Low flow showerheads• AC units
12
Defining Measure Cost Parameters
Measure costs specifications encompass the sizes and technical specs of measures used in the energy analysis, but reflect availability of products on the market
Cost data is first cost only -- life cycle or O&M costs/cost savings not included
Some price observations (outliers) excluded; rational purchasing policy assumed (“who would pay THAT?”)
Equipment and labor prices are specific to California to extent possible (average across state)
Cost units ($ / ton, $ / HP, $ / square foot, etc.)• Mostly the same although different for some measures• Distinct field in detailed cost data; appended to Cost Basis
designator in measure detail
13
How to find the most applicable cost information?• Measure detail pages for each run ID - the per unit
equipment measure cost of $13.65 for all 90% residential furnaces• This provides an average cost based on a 100,000 Btu furnace
• The ‘Cost Data’ file under ‘Supporting Documents’ provides prices on a range of furnace sizes • This provides a range of costs for 90% AFUE furnaces from
60,000 Btu to 140,000 Btu. Per unit costs ($/KBtu) ranges from $21.53 to $12.13, respectively
• The cost workbook section – Can use either statistical summary or individual price observations• For example, the per unit equipment measure cost for 90%
AFUE 100,000 furnaces ranges from to $12.31 to $16.52 based on 9 observations
Cost Data Defining Cost Parameters
14
Website Considerations
Two Levels of Savings Customer savings - for system savings and early
replacement savings. “Above Code” Savings - for all measures affected
by an energy code or standard (reportable savings for replace on burnout.)
Common Units The energy and cost common units are distinct Over 90% of cases, they are the same When different, distinctly identified
15
Website Considerations
Application – indicates if the cost is for:• Retrofit (RET) - replacing a working system with a new
technology or adding a technology.• Replace-on-burnout (ROB) - replacing a technology at the
end of its useful life • New construction or major renovation (NEW) - installing a
technology in a new construction or major renovation Cost Basis – indicates if the cost is:
• Incremental (INCR) - the differential cost between a base technology and an energy efficient technology
• Installed (FULL) - the full or installed cost of the measure including equipment, labor, overhead & profit (OH&P)
16
Website Navigation – Opening Screen
17
Website Navigation – Browse Measures
18
Website Navigation – Select Subcategory
19
Website Navigation – Review Summary Page - Top
20
Website Navigation –Summary Page Information
Area #1 - Summary Identification of 13 variables
Area #2 – Further Filtering Options Climate Zone, Building Type, Vintage, Savings
Unit Area #3 – Sorting Order Area #4 – Download Measure Detail in
Excel
21
Website Navigation – Review Summary Page - Bottom
22
Website Navigation – Detailed Measure Information
23
Website Navigation – Detailed Measure information - Top
24
Website Navigation – Detailed Measure information - Bottom
25
Supporting Documents Section
Website Users Guide Net-to-Gross Ratios Table (if in doubt use .8) Access Tables Glossary Cost Data Cost Data User’s Guide New EUL Estimates (7-14-05 SERA Report) Consolidated Measure Data