Page 1 of 5

NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.

Product Name: VK-2107

Process: Colossus 8-Color

Material: Poly Knit 9

Effective Date: 09/20/13

.75"

1”w x 3/8”h notchon center of top and bottom and 4 corners

Finished Size: 91"w x 81.75”hLive Area: 90”w x 80.25”h

Sew 1/2” hook Velcro into front perimeter

Finished Size: 25.5”w x 81.75”hLive Area: 24”w x 80.25”h

Sew 1/2” hook Velcro into front perimeter

3/8”w x 2.5”h notchon left and right side

Approx

81.7

5"

91 .00"

90 .00"

80.2

5"

.50"

39.25"

Sacagawea Backwall Graphic Dims VK-2107

NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.

Backwall Large Section Graphic (Included)Banner Section Graphic (Included)Backwall Tension Fabric Graphic (Included)

2 5.5 0"

2 4.0 0"

81.7

5"

80.2

5"

39.25"

1”w x 3/8”h notchon center of top and bottom and 4 corners

Finished Size: 91"w x 81.75”hLive Area: 90”w x 80.25”h

Sew 1/2” hook Velcro into front perimeter

81.7

5"

91 .00"

90 .00"

80.2

5"

.50"

39.25"Add 1/2” bleed to left and rightand 3/4” bleed to top and bottom

Add 1/2” bleed to left and rightand 3/4” bleed to top and bottom

Page 2 of 5

NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.

7.75

"

9 1.0 0"

11 .00"

56.5

0"

22”Monitor

Approx. Dims 20.5”w x 16”h

*

81.7

5"

.

32.5

0"

11 .88 "

6.00"

*Counter

25.00"

Blue Area indicates 3/4” bleed areaaround the counter and the monitor

Product Name: VK-2107

Process: Colossus 8-Color

Material: Poly Knit 9

Effective Date: 09/20/13

Sacagawea Backwall Accessories (Counter/Monitor)

"

7.75

"

9 1.0 0"

11 .00"

56.5

0"

22”Monitor

Approx. Dims 20.5”w x 16”h

*

81.7

5"

.

32.5

0"11 .88 "

6.00"

*Counter

NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.

*NOTE: When adding Monitors and Counters to the Sacagawea unit, portions of the graphic will be covered. Please design graphic layout according to suggested locations.-See Header Graphic Dims for header locations.

Page 3 of 5

Product Name: VK-2107

Process: See Below

Material: See Below

Effective Date: 09/20/13

NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.

NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.

Sacagawea Serpentine Canopy Structure Dims VK-2107

Single Sided: NODouble Sided: YES

Fabric Option

Print/Cut Size

Final Size

Zipper Length

117" (w) X 38" (h)116.5" (w) X 37.5" (h)

116" (w) X 19" (h)115.5" (w) X 18.75" (h)

115.5"115.5"

Knit 9Unprinted Twill

Sewing Instructions:

Zipper sewn across top.Seam sides using a 1/2" seam. Test hang on frame.

Product Name: VK-2107

Process: Direct Print

Material: 1/8” Sintra or Plex

Effective Date: 09/20/13

NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.

NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.

A small portion of your graphic(s) may be hidden by monitor and counter. Please use these diagrams to position your graphics correctly.

Sacagawea Wing Dims VK-2107

*Counter

6.0"

22”Monitor

Approx. Dims 20.5”w x 16”h

*

11.88 "

32.5

0"

4 .75"

40"

40"

13 "

Convex Wing for T-Series20’ Unit includes (2) Bottom Panels and (2) Upper Panels

Rad: 83.1738"Sweep: 28.746°Arc Len: 41.7287"

Bac

kwal

l Gra

phic

6.5"

17.5

"16

"

40"

13 "

"

40"

9 .75"

Bac

kwal

l Gra

phic

Page 5 of 5