10 reasons why your photos arent sharp (and how to fix them)byAngela Nicholson May 15, 20133 Comments

Getting sharp photos is one of the fundamental goals in photography. If your images arent as sharp as youd like, take a look at our ten-point guide to work out where youre going wrong and how to get it right next time.

Reason No. 1. Your Photos Arent Sharp: Shutter speed too lowIn the days of film photography there was a general rule that in order to get sharp images from a hand-heldcamerathe shutter speed needed to be at least one second divided by the focal length of the lens.So if you were shooting with a 100mm optic the shutter speed needed to be at least 1/100sec, which because of the way shutter speed is set usually translates to a setting of 1/125sec or faster.This rule still holds today, but it is somewhat complicated by the focal length magnification factors of sub-full-frame sensors and image stabilisation systems.For example, if a 100mm lens is mounted on a Nikon APS-C format SLR like the D5200, which has a focal length magnification factor of 1.5x, the photographer would need to set a shutter speed of at least 1/150sec.Canon APS-C format DSLRs like the EOS 650D have a 1.6x focal length magnification factor, so the shutter speed would need to be at least 1/160sec.

The image stabilisation systems built into some lenses and cameras have a mechanism to compensate for accidental camera movement and this allows slow shutter speeds to be used when the camera is handheld.Many lenses now claim a 4EV compensation, which means that the shutter speed can be reduced by 16x. Thats the difference between 1/125sec and /18sec.Even with image stabilisation some people are better at handholding a camera steady than others. The amount of coffee and alcohol that youve drunk can make a difference as well.Reason No. 2 Your Photos Arent Sharp: Camera shake

If you cant use a shutter speed fast enough tofreeze accidental camera movements, or camera shake, and cant or dont want topush the sensitivity setting up, then you need to put the camera on some form of support.A monopod can be extremely usefulwhen youre using a long, heavy telephoto lens and you want take some the weight off your arms and reduce the shaking that becomes very apparent as soon as you look through the viewfinder.It is light and easy to move allowing plenty of freedom to move the lens around and track a moving subject.However, when you need maximum stability, a tripod is the way to go. If you dont need the full height of the tripod only extend the thicker leg sections and dont pull-out the centre column to get the best results.Reason No. 3 Your Photos Arent Sharp: Vibrations from touching the camera

Just touchinga camera mounted on a tripodcan be enough to set it wobbling a little and this can make your images soft. Fortunately, its relatively easy to resolve the problem with a remote release.Remote releasescome in two forms, wired and wireless. As a general rule wireless remote releases are more expensive but more effective than wired ones.A wired release has to be connected to thecameraand any movement of the cable, perhaps as result of it blowing in the wind or you moving it, can transfer to the camera and soften the image, so take care how you handle it.One downside with wireless remote releases is that they usually work via infrared light and this can make them trick to use in bright sunlight. They also usually need the trigger to be in the line of sight of the receiver/camera.Remote releases are especially useful when you wantvery long bulb exposuresbecause they avoid you having to press the cameras shutter release button throughout the duration of the exposure.Reason No. 4 Your Photos Arent Sharp: Mirror-slap

If dont have a remote release to hand the cameras self timer can be a good stand-in as it triggers the shutter to fire after the vibration from pressing the shutter release has died down.However, DSLRs can actually create image softening vibration themselves because the action ofthe mirror flipping upto allow the exposure is enough to start things wobbling.Mirror-slap is more of an issue with some cameras than others. Some have a more dampened mirror movement, which makes it less problematic, for example.However, if you want to get the full benefit of all those pixels on high-resolution cameras like the Nikon D800 you need to go the extra mile anduse mirror-lock up mode.When mirror-lock up mode is selected the first press of the shutter release (on the camera or a remote release) lifts the mirror.Then, when any vibration resulting from the mirror movement has died down you press the release again to trip the shutter and take the shot.Reason No. 5 Your Photos Arent Sharp: Subject movement

To freeze the motion of a fast-moving subject, choose a fast shutter speedIt doesnt matter how rock-steady thecamerais, if the subject is moving the image will be blurred. If youre shooting a moving subject and you want it sharp rather than blurredthe shutter speed has to be fast enough to freeze the movement.But how fast is fast enough?A shutter speed of 1/60sec or 1/125 is usually fast enough to freeze a walking person, but youll need topush the shutter speed upwith faster moving subjects.If youre photographing sports like football and hockey a shutter speed of around 1/500sec is often fast enough to freeze a players body, but the fastest moving parts such as their legs or the hockey stick may still be blurred and an even shorter exposure time is required.Using fast shutter speeds means using a higher sensitivity (ISO) setting and/or opening up the aperture to let more light into the camera.Although its a good idea to avoid raising the sensitivity setting when youre shooting landscapes and still life subjects, its often essential when shooting sport and action.Provided that you avoid the very top sensitivity values most modern DSLRs and CSCs produce decent images. Its also worth remembering that a little bit of noise is usually preferable to a badly burred image.Reason No. 6 Your Photos Arent Sharp: AF focused on wrong subject

Modern cameras can really make life easy for you, setting the focus point, exposure and white balance automatically to deliver great images.However, they are not infallible.If you let the camera take control of the focus point selection it may get it wrong.Many cameras are calibrated to focus on the nearest subject towards the centre of the frame. As a result if your subject is near the edge of the frame or not the closest object to the lens the camera may focus on the wrong point.This is especially true when shooting subjects close-up as the camera usually looks for something in the mid-distance and you may find the background is in focus rather than your subject.The simple solution here is to take control over the focus point yourself. The mode you want is usually called something like Single point AF or Select AF.Once you have selected the correct mode, use the cameras navigation controls to select the AF point that lies over your subject in the frame.Even if you camera has lots of AF point there are likely to be some occasions when there isnt one that lines up with the subject.If this happens simply choose a point thats near the subject, or the central point (as it is the most sensitive), and move the camera so this point is over the subject.Then half-press the shutter release to focus the lens, before recomposing the shot while keeping the shutter release button pressed. When the scene is correctly composed push the shutter release home to take the shot.This focus-and-recompose technique is very useful and it gets quicker with practice so some photographers use it all the time.Reason No. 7 Your Photos Arent Sharp: Continuous AF not selected

In single AF mode thecamerafocuses the lens when the shutter release is pressed half-way and the focus stays at that point until you lift your finger off the shutter button and press again.If you want to focus elsewhere you need to lift your finger and either recompose or select another AF point before depressing the shutter release again.If you use single AF mode to photographing a moving object youll find that the camera focuses the lens on the subject at first, but that the subject moves out of focus. Consequently, if you are shooting continuously only the first image will be sharp.As it name suggests, in continuous AF mode the camera continues to focus the lens for as long as the shutter release button is held down.This means that provided you keep the active AF point over the subject (many cameras offer a tracking options to help with this) it will be in sharp focus in every shot (within reason).Reason No. 8 Your Photos Arent Sharp: Continuous AF selected

Continuous AF mode is enormously useful when shooting moving objects and provided the subject is under the active AF point it can also be used to shoot stationary objects.However, if you use the focus-and-recompose technique the camera will refocus the lens as soon as you recompose the image.So the simple rule is, if you are going to focus and recompose, make sure the camera is set to single AF mode.10 reasons why your photos arent sharp (and how to fix them)Reason No. 9 Your Photos Arent Sharp: Depth of field too shallow

With a few creative exceptions, when youre shooting landscapes you usually want the image to be sharp throughout the whole scene, from the foreground to the background. This requires using a small aperture to get lots of depth of field.Using a small aperture and a low sensitivity setting for maximum detail and sharpness means also using a fairly slow shutter speed, making a tripod essential.Reason No. 10 Your Photos Arent Sharp: Aperture too small

Althoughusing a small aperture increases depth of field(the size of the focused area in the shot) it also increases the impact of diffraction, the bending of light as it passes over the edge of the aperture blades.This bending prevents the light from focusing on the sensor and thus softens the image. The smaller the aperture, the greater the proportion of unfocused light reaching the sensor, so the greater the softening effect.This means that there is a compromise between depth of field and sharpness. Rather than closing the aperture right down to its minimum setting, its better to open up by stop or two.To discoverhow aperture size influences sharpnesswith your lenses, set yourcameraup on a tripod and focus on an object with lots of detail. Then take a shot at every available aperture setting.When youve finished transfer the images to your computer and examine them at 100% on the computer screen.Look carefully at the point of focus and youll see that the images go from being a little soft when the aperture is wide open, to being progressively sharper as the optimum aperture is approached.Beyond this the image becomes softer again as diffraction becomes more of an issue.READ MORE10 common camera mistakes every photographer makes10 common exposure problems every photographer faces (and how to fix them)Master your cameras autofocus: which AF points to use and when to use them15 common photography questions from beginners (and how to solve them)