of 12
7/29/2019 11.05-07 Guides Courses Website WSchmid
1/12
1
1 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
TCTC--IM Focus GroupIM Focus Group
FacilitatingFacilitating National MetrologyNational Metrology
Infrastructure DevelopmentInfrastructure Development
Wolfgang Schmid, EURAMET SecretaryWolfgang Schmid, EURAMET Secretary
Skopje,Skopje, FYR MacedoniaFYR Macedonia
27/28 November27/28 November 20082008
2 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
11.0511.05
Development ofDevelopment ofGuidance DocumentsGuidance Documents
7/29/2019 11.05-07 Guides Courses Website WSchmid
2/12
2
3 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
4 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Albanian: Metrologjia shkurt
Arabic
Czech: Metrologie v kostce
Croatian: Metrologija ukratko
Danish: Metrologi kort og godt
Finnish: Metrology in short
Indonesian: Metrologi - sebuah pengantar
Icelandic: Agrip af Mlifrdi
Japanese: Japanese characters
Lebanese: ABC-guide Metrology (English and Arabic)
Lithuanian: Metrologija trumpai
MEDA region: Metrology - in short, MEDA version
MEDA region: Mtrologie - en bref, dition MEDA
Polish
Portuguese: Metrologia em sintese
Serbian: Metrologija ukratko drugo izdanjeThai
Turkish: Kisaca Metroloji - ikinci baski
Metrology In Short
7/29/2019 11.05-07 Guides Courses Website WSchmid
3/12
3
5 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Metrology In Short
3rd edition
In Serbian andBulgarian languagealready available!
6 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
N Calibration Guides TC
01 Calibration of Stylus Instruments for Measuring Surface Roughness * L
02 Calibration of Gauge Block Comparators L
03 Calibration of Pressure Balances * M
04 Uncertainty of Calibration Results in Force measurements * M
05 Co-ordinate Measuring Machine Calibration * L
06 Extent of Calibration for Cylindrical Diameter Standards L
07 Calibration of Oscilloscopes * EM
08 Calibration of Thermocouples T
09 Measurement and Generation of Small AC Voltages with Inductive VoltageDividers
EM
10 Determination of Pitch Diameter of Parallel Thread Gauges by MechanicalProbing
L
11 Guidelines on the Calibration of Temperature Indicators and Simulators byElectrical Simulation and Measurement
T
12 Guidelines on the Evaluation of Vector Network Analysers (VNA) EM
13 Guidelines on the Calibration of Temperature Block Calibrators T
14 Guidelines on the Calibration of Static Torque Measuring Devices M
15 Guidelines on the Calibration of Digital Multimeters EM
16 Guidelines on the Estimation of Uncertainty in Hardness Measurements M
17 Guidelines on the Calibration of Electromechanical Manometers M
18 Guidelines on the Calibration of Non-Automatic Weighing Instruments M
7/29/2019 11.05-07 Guides Courses Website WSchmid
4/12
4
7 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
DRAFT
Specific Rules for theuse of EURAMETCalibration Guidesby other organisationsin preparation
8 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Translation of EURAMET documents
EURAMET e.V. holds the copyright on all documents elaborated within its committees.Permission must be sought from the EURAMET Secretariat prior to the translation of anyof these documents. EURAMET can grant permission under the following conditions:
1) Reference is made to the original document *
2) The document is not modified and is clearly recognised as a translation ofthe corresponding EURAMET document
3) The use of the translated document is for non-commercial reasons. Thedocuments may be disseminated free of charge in electronic or printed form.
4)
* This document is a translation of EURAMET e.V.
Conditions for copying and translating may be obtained from theEURAMET Secretariat
* This document is a translation of EURAMET e.V.
Conditions for copying and translating may be obtained from theEURAMET Secretariat
7/29/2019 11.05-07 Guides Courses Website WSchmid
5/12
5
9 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
EURAMET Guides
N Title Status
1 EUROMET's policy on the Application of Quality System inNational Metrology Institutes
under revision
2 EUROMET and its International Relations to be deleted, information to bepresented in Website and Directory
3 Guidelines on Conducting Comparisons under revision, to be substituted bysingle guide on projects
5 EUROMET Co-operation in Research under revision, to be substituted bysingle guide on projects
6 EUROMET Traceabilit y under revision, to be substituted bysingle guide on projects
7 EUROMET Consultation on Facilities under revision, to be substituted by
single guide on projects
8 Review Criteria and Procedure for EUROMET CMCs approved 2008-06
10 EURAMET and the operation of NMIs approved 2008-06
Draft Elaboration and maintenance of EURAMET guidancedocuments
10 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Target Group: Who needs these guides?
Metrologists in ...
NMIs developing their infrastructure
experienced NMIs (new personnel)
Designated Institutes
secondary laboratories
accreditation bodies
....
Further Need for Guidance DocumentsFurther Need for Guidance Documents
7/29/2019 11.05-07 Guides Courses Website WSchmid
6/12
6
11 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Which guides are needed?
Some proposals:
Traceability
Measurement uncertainty: GUM, MCS
Calibration Certificates
Maintenance of National Standards in DIs
EURAMET Manual
.... ???
Further Need for Guidance DocumentsFurther Need for Guidance Documents
12 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Complement list of required documents
Collate documents already available (BIPM, PTB Technical Cooperation ...)
Action plan for documents to be developed, prioritisation
Develop documents, establish teams or working groups
Translation of documents to national languages
Could be supported within secondments to the EURAMET Secretariat !
Guidance Documents: Further ActivitiesGuidance Documents: Further Activities
7/29/2019 11.05-07 Guides Courses Website WSchmid
7/12
7
13 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
11.0611.06
Development ofDevelopment of
Training CoursesTraining Courses
14 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Knowledge Transfer as a crucial activity ofKnowledge Transfer as a crucial activity of NMIsNMIs
Calibrations;
47%
Consultacy; 9%
MESURA; 13%
Internships; 1%
Congresses,
Seminars; 4%
Training
courses; 11%
Other activities;
8%
CRM; 7%
Example:
CENAM, Mexico
Income in 2007
Knowledge Transfer: 38%
7/29/2019 11.05-07 Guides Courses Website WSchmid
8/12
8
15 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Possible activities of a Training and Information Centre of an NMI
Organise training courses (external and internal)
Organise internships: calibration labs, industry, students
Organise consultancy: calibration labs, industry
Information Centre
Publicity of the NMI
Actualisation of staff of the NMI
Knowledge Transfer by an NMIKnowledge Transfer by an NMI
Draftpr
oposal
Stefka H
ristova (NCM-B
IM)
Wolfgan
gSchmi
dDraft
propos
al
Stefka H
ristova (NCM-
BIM)
Wolfgan
gSchmid
16 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Publish a guidance document for a Training and Information Centre
Develop training courses
Develop guidance documents
Develop material for awareness raising (PP-slides, flyers, etc.)
Possible Cooperation within the FG:Possible Cooperation within the FG:
7/29/2019 11.05-07 Guides Courses Website WSchmid
9/12
9
17 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Identify need for traininga) in the NMIsb) in industry
Identify existing training material, develop training material jointly
Give training courses for the staff of the NMIs
Train the trainers in the NMIs
NMIs adopts training course to national needs (language)
NMI provides training in the country
Training Courses:Training Courses:
18 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
11.0711.07
Website of the FGWebsite of the FG
http://www.euramet.org/index.php?id=621http://www.euramet.org/index.php?id=621
7/29/2019 11.05-07 Guides Courses Website WSchmid
10/12
10
19 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
20 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
7/29/2019 11.05-07 Guides Courses Website WSchmid
11/12
11
21 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
22 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
7/29/2019 11.05-07 Guides Courses Website WSchmid
12/12
12
23 TC-IM FG Facilitating National Metrology Infrastructure DevelopmentSkopje, FYR Macedonia, 27/28 November 2008
Revise foreseen content and structure
Concept for public / restricted areas
Collate required information and documents
Complement website
Could be done within a secondment to the EURAMET Secretariat !
Website: Further ActivitiesWebsite: Further Activities