3
Standardized silos and accessories Doc no. 33.00.05.0 GB / version 1.0 / issue 23.09.2011 Copyright by Zeppelin Systems GmbH, Leutholdstraße 108 - 88045 Friedrichshafen, Germany Tel. +49 7541 202-02, Fax -491, [email protected] - www.zeppelin-systems.com Page 23 of 104 BOLT-TEC Zeppelin BOLT-TEC Silos – storage silos in modular construction Innovative and quick With the new Bolt-Tec Design silos high freight charges, expensive as- sembly operations and damage to the silo during transport are things of the past. The silos can "grow" to meet your changing requirements: should you ever require larger storage capacities in the future your silo can be quickly retrofitted without difficulty. Furthermore, Bolt-Tec Design silos can be easily dismounted and reinstalled at another location. The concept The different silo segments are transported in containers and then bolted to each other on site. No specialized assembly staff is required as the work can be carried out quickly and at low cost by your own staff. The very special » low freight charges, easy and quick assembly » low assembly costs » assembly inside buildings possible » subsequent increase of the silo capacity » planning reliability » flexible location » internal special seals ensure very high leak tightness » weathering-resistance = maximum profitability combined with highest Zeppelin quality Standard types » diameters: 4050 and 5400 mm » bulk densities: 6.5 kN/m³ and 9.5 kN/m³ » with long or short skirt » cone angle 60°or 40° » appropriate for anchoring on a concrete foundation or steel structure » earthquake zone max. 2A (based on UBC 1997) » appropriate for wind loads up to max. 49 m/s » large variety of accessories available » special designs and accessories on request
