113568 | SYS-PRO RGB+W 4 zones remote control with 2 scenememories Operation temperature Housing temperature (max.) Enviroment IP20 IP rating Technical Parameters Standby time 1 Year Working current Standby current <20mA <10μA Input and Output Output Signal Working voltage RF 2.4 GHz 3 V DC Safety and EMC EMC Standard EN301 489,EN 62479 Radio Equipment (RED) EN300 328 Certificates CE, EMV, LVD, RED EN60950 Safety Standard (LVD) Remote distance 30m (Barrierfree) Ta: -30 O C ~ +55 O C T c: +85 O C LVD Features ● Apply to RGB or RGBW LED controller or smart lamp. ● Black or white version available. ● Ultra sensitive color adjustment touch wheel. ● Adopt 2.4GHz wireless technology, remote distance up to 30m. ● Each remote can match one or more receiver. ● Battery powered (2 x AAA). ● Operate with LED indicator light. RED Dimensions Match guide The connection with any Controller is described in the Controller instruction. Attention: This remote control only works with controllers from the ISOLED® Sys-Pro series.
Transcript
113568 | SYS-PRO RGB+W 4 zones remote control with 2 scene memories
Features● Apply to RGB or RGBW LED controller or smart lamp.● Black or white version available.● Ultra sensitive color adjustment touch wheel.● Adopt 2.4GHz wireless technology, remote distance up
to 30m.● Each remote can match one or more receiver.● Battery powered (2 x AAA).● Operate with LED indicator light.
V1-L/P Single Color LED Controller
Page 1
Mechanical Structures and Installations
● Connect with push switch
● Match with dimming remote
AC100-240VPower Supply12-24VDCConstant Voltage
27mm
175mm
160mm
45mm
Match key
Push switch common
Power input -
Power input +
LED output + Push switch
Dip switch setting
LED indicator
12
3
LED output -
12
3
Single color LED strip +
AC100-240VPower Supply12-24VDCConstant Voltage
12
3
Single color LED strip +
Push Switch
RED
Installation rack
RF remote
Wiring Diagram
V1-L/PLED Dimmer
Uin=12-24VDCIin=15.5A
Uout=12-24VDCIout=15APout=180-360W
Temp Range: -30℃-+55℃
MA
TC
H
I
N P
UT
12
-24
VD
C +
-
+
-+
-
0.5-2.0mm
2.4G
12
3
12
12
12
3
logarithmlinear
250Hz
500Hz
2KHz
8KHz
PW
M F
requency
Dim
min
g C
urve
10
A1
2A
15
A1
5A
V1-L/PLED Dimmer
Uin=12-24VDCIin=15.5A
Uout=12-24VDCIout=15APout=180-360W
Temp Range: -30 ℃-+55℃
MA
TC
H
I
N P
UT
12
-24
VD
C +
-
+
-+
-
0.5-2.0mm
2.4G
12
3
12
12
12
3
logarithmlinear
250Hz
500Hz
2KHz
8KHz
PW
M F
requency
Dim
min
g C
urve
10A
12A
15A
15A
V1-L/PLED Dimmer
Uin=12-24VDCIin=15.5A
Uout=12-24VDCIout=15APout=180-360W
Temp Range: -30 ℃-+55℃
MA
TC
H
I
N P
UT
12
-24
VD
C +
-
+
-+
-
0.5-2.0mm
2.4G
12
3
12
12
12
3
logarithmlinear
250Hz
500Hz
2KHz
8KHz
PW
M F
requency
Dim
min
g C
urve
10A
12A
15A
15A
Dimensions
Match guideThe connection with any Controller is described in the Controller instruction.
Attention: This remote control only works with controllers from the ISOLED® Sys-Pro series.
Features● 4096 levels 0-100% dimming smoothly without any flash.
● Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
● One RF controller accept up to 10 remote control.
● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
● Synchronize on multiple number of controllers.
● Connect with external push switch to achieve on/off and 0-100% dimming function.
● Logarithmic or linear dimming curve selectable.
● PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable.
● Over-heat / Over-load / Short circuit protection, recover automatically.
Page 1
113568 | SYS-PRO RGB+W 4 zones remote control with 2 scene memories
Dimming curve Logarithmic or linear
250Hz, 500Hz, 2kHz, 8kHzPWM Frequency
RED
Warranty and Protection
5 years
Protection
Reverse polarityOver-heat Over-load Short circuit
Warranty
Short press turn on/off all zone light.
Short press select and turn on zone light,long press 2s turn off zone light.Continuous short press multiple zone key,can synchronous select multiple zone.
Touch to change current zone static RGB color.
Get red, green or blue color directly.
For RGBW light, short press turn on/off W channel,long press 1-5s continuous 256 levels adjust W brightness.
Adjust mode for current selected zone,Short press run next RGB mode, long press 2s run mode-cycle.
For static color, adjust brightness,short press 10 levels,long press 1-5s continuous 256 levels adjustment.For dynamic mode, adjust speed,short press 10 levels, long press 2s the default speed.
Short press run the scene, long press 2s save.4 zone run or save synchronously.
