BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
Quilt Diagram
J
1 2 2
2
2
2
2
22
1
1
1
111
1
1
C
C
C
C
C C C C
J
J
D D D D D
D D
D D
D D
D D
D D D D
JCenter Block
Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
Quilt Diagram
J
1 2 2
2
2
2
2
22
1
1
1
111
1
1
C
C
C
C
C C C C
J
J
D D D D D
D D
D D
D D
D D
D D D D
JCenter Block
Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
Quilt Diagram
J
1 2 2
2
2
2
2
22
1
1
1
111
1
1
C
C
C
C
C C C C
J
J
D D D D D
D D
D D
D D
D D
D D D D
JCenter Block
Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
Quilt Diagram
J
1 2 2
2
2
2
2
22
1
1
1
111
1
1
C
C
C
C
C C C C
J
J
D D D D D
D D
D D
D D
D D
D D D D
JCenter Block
Note: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.
SAMPLE KEY/SKU QTY CUT CUT PIECES VIA WOF BLOCK ASSEMBLY PROJECT USES PRECISE 1/4” SEAMS. TEST YOUR SEAM ALLOWANCE BY CUTTING (2) 2-1/2” X 5” RECTANGLES. STITCH THEM TOGETHER ALONG THE 5” LENGTH. AT THE MIDPOINT, MEASURE ACROSS THE UNIT. IT SHOULD BE EXACTLY 4-1/2” WIDE. IF NOT, ADJUST YOUR SEAM ALLOWANCE AND REPEAT.
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
A
C
E
G
I
K
B
D
F
H
J
Joyful Journey Panel7969-99 Multi
Superior Solids3000B-10 Red
Candy Cane Celebration7975-09 White
Superior Solids3000B-44Green
Superior Solids3000B-09 White
Joyful Geo7978-10 Red
Joyful Lights 7972-05 Sky
Christmas Campers 7970-05 Sky
Joyful Geo7978-09 White
Joyful Geo7978-44 Green
Stay Warm7976-09 White
Fussy cut (1) 34-1/2” x 41-1/2” panel.
(2) 2-1/2” x WOF strips.(2)1-1/2” x 42-1/2” WOF strips, piece as needed.(3) 1-1/2” x WOF strips.*(3) 1-1/2” x WOF strips.*(3) 1-1/2” x WOF strips.*
(2) 2-1/2” x WOF strips.
(4) 2-1/2” x WOF strips.
(2) 2-1/2” x WOF strips.
(7) 2-1/2” x WOF strips, BINDING.
(2) 4” x 41-1/2” WOF strips, piece as needed.(2) 3-1/2” x 41-1/2” WOF strips.
Fussy cut (17) 6-1/2” squares, each centered on a camper.
(2) 2-1/2” x WOF strips.
(3) 2-1/2” x WOF strips.
(4) 5-1/2” x WOF strips.*(4) 5-1/2” x WOF strips.*
* SEW STRIPS VIA SHORT ENDS THEN GO TO BORDER ASSEMBLY WOF/LOF=WIDTH/LENGTH OF FABRIC
5/8 yd
3/4 yd
1/4 yd
1/3 yd
1-3/8 yds
1 panel
7/8 yd
1/4 yd
3/8 yd
1/4 yd
5/8 yd
Quilt AssemblyBORDER ASSEMBLY MEASURE WIDTH AND LENGTH OF THE QUILT TOP TO ENSURE C AND J BORDER SIZES, BELOW ARE OUR CUTTING SIZES.
FINISHED SIZE: 66” x 72”
FINISHING Cut batting and backing 3” larger than top on all sides. Layer backing, batting and top together and baste or pin. When quilting is completed, trim excess batting and backing. Bind as usual.
12. Sew (2) Block One squares, (4) D 6-1/2” squares and (2) Block Two squares together to make (1) Side Border strip. Repeat to make a second Side Border strip.
13. Sew (5) D 6-1/2” squares, (2) Block One squares and (2) Block Two squares together to make the Top Border.
14. Sew (3) Block One squares, (4) D 6-1/2” squares and (2) Block Two squares together to make the Bottom Border.
B
Center Block
A
B
B B
Trim blockto measure40 ½” x 46 ½”AFTER adding Fabric B border
Strip Set 1make 2
E FG
Unit 1cut 18E FG
Strip Set 2make 1
G GC
Unit 2cut 9
G GC
Strip Set 3make 1
I IH
Unit 3cut 16I IH
Strip Set 4make 1
H HC
Unit 4cut 8
H HC
Block Onecut 9Unit 1Unit 2
Unit 1
Block Twocut 8Unit 3Unit 4Unit 3
Block Assembly Note: Pay attention to the unit orientations when assembling the various components.1. Sew (1) B 4” x 41-1/2” strip to each side of the A 34-1/2” x 41-1/2” panel. Sew (1) B 3-1/2” x 41-1/2” strip to the top and to the bottom of the A panel. Trim the block to measure 40-1/2” x 46-1/2” to make the Center Block.
2. Sew (1) E 2-1/2” x WOF strip, (1) G 2-1/2” x WOF strip and (1) F 2-1/2” x WOF strip together lengthwise and in that order left to right to make (1) Strip Set 1. Repeat to make a second Strip Set 1.
3. Cut the Strip Set 1 into (18) 2-1/2” x 6-1/2” Unit 1 strips.
4. Sew (1) G 2-1/2” x WOF strip to each side of (1) C 2-1/2” x WOF strip lengthwise to make (1) Strip Set 2.
5. Cut the Strip Set 2 into (9) 2-1/2” x 6-1/2” Unit 2 strips.
6. Sew (1) I 2-1/2” x WOF strip to each side of (1) H 2-1/2” x WOF strip lengthwise to make (1) Strip Set 3.
7. Cut the Strip Set 3 into (16) 2-1/2” x 6-1/2” Unit 3 strips.
8. Sew (1) H 2-1/2” x WOF strip to each side of (1) C 2-1/2” x WOF strip lengthwise to make (1) Strip Set 4.
9. Cut the Strip Set 4 into (8) 2-1/2” x 6-1/2” Unit 4 strips.
10. Sew (1) Unit 1 strip to the top and to the bottom of (1) Unit 2 strip lengthwise to make (1) Block One square. Repeat to make (9) Block One squares total.
11. Sew (1) Unit 3 strip to the top and to the bottom of (1) Unit 4 strip lengthwise to make (1) Block Two square. Repeat to make (8) Block Two squares total.
15. Sew (1) C 1-1/2” x (46-1/2”) strip to each side of the Center Block. Sew (1) C 1-1/2” x (42-1/2”) strip to the top and to the bottom of the Center Block.
16. Sew (1) Side Border to each side of the Center Block. Sew the Top Border and Bottom Border to the top and to the bottom of the Center Block.
17. Sew (1) C 1-1/2” x (60-1/2”) strip to each side of the Center Block. Sew (1) C 1-1/2” x (56-1/2”) strips to the top and bottom of Center Block.
18. Sew (1) J 5-1/2” x (62-1/2”) strip to each side of the Center Block. Sew (1) J 5-1/2” x (66-1/2”) strips to the top and bottom of Center Block.