306 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
Pipe HangersMany thousands of kilometres of piping are suspended from the roofs of buildings in every country. Flamco’s comprehensive range of pipe supports offers a complete solution for mounting threaded tubes, thin-wall steel pipes, copper pipes, plastic pipes and rail structures safely, easily and reliably. Flamco also offers a range of certifi ed pipe hangers for sprinkler systems. In short, Flamco offers a solution for any conceivable situation.
12.
307
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
Pipe HangersMany thousands of kilometres of piping are suspended from the roofs of buildings in every country. Flamco’s comprehensive range of pipe supports offers a complete solution for mounting threaded tubes, thin-wall steel pipes, copper pipes, plastic pipes and rail structures safely, easily and reliably. Flamco also offers a range of certifi ed pipe hangers for sprinkler systems. In short, Flamco offers a solution for any conceivable situation.
308 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
BK Pipe Hangers: One Piece Construction Ensures The Highest StrengthThe advantages of Flamco BK:• The one-piece clip can withstand a very high load.• Thanks to the ball joint, it is not necessary to
have a separate ball hinge to accommodate low level expansion.
• Substantial freedom of movement.
• Given the length of the sleeve, it is also possible to insulate the pipe after fitting, without impairing the freedom of movement of the ball joint.
The ball joint allows freedom ofmovement - 6° from the axisnegating or reducing fixed points.
1. Open the clip by hand and fit it around the pipe.
2. Align the two tabs on the clipwith the ball joint and hold them in place.
3. Then slide the sleeve down and over the tabs and…. That's all there is to it!
Installation without tools
ClickEasy K.
T cap for sealing the ball joint.
BKI clip with rubber lining.
BO / BOK Connecting clipsfor 'back-to-back' type installation.
ST spreader plate.
D threaded rod.
BK pipe hangers• To hang threaded pipes, boiler
tubes and thin wall steel tubes.• Sendzimir zinc plated clip.
BKI pipe hangers• With a noise suppressing rubber lining.• For pipe dimensions in excess of
219.1 mm, a BK clip can be used with a separate rubber SR lining strip.
• Sendzimir zinc plated clip (BKI 12 electrolytically zinc plated).
LB mounting strip• The plastic covering is stuck to the
steel core so that it cannot slide.• Can be easily cut to the right length.• High mechanical tensile strength,
easy and quick to install.
SR noisesuppression strips• Noisesuppressing lining for clips.• When the SR strip is used the clip
chosen must be greater in diameter than the outside diameter of the pipe to be fitted.
BKK pipe hangers• For hanging copper pipes.• Copper bracket,
bushing and ball joint zinc plated.
BKP pipe hangers• For mounting plastic
pipework.• Clip Sendzimir
zinc plated.
T cap• Drip and dust tight seal ensures
that the ball joint retains full freedom of movement.
• Holds the sleeve tight so that you can use both hands for assembly.
BO/BOK extension pieces• To hang a BK clip
from the one above whilst maintaining flexibility in the fastening.
RD rail end cap.
R rail.
309
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
BK Pipe Hangers: One Piece Construction Ensures The Highest StrengthThe advantages of Flamco BK:• The one-piece clip can withstand a very high load.• Thanks to the ball joint, it is not necessary to
have a separate ball hinge to accommodate low level expansion.
• Substantial freedom of movement.
• Given the length of the sleeve, it is also possible to insulate the pipe after fitting, without impairing the freedom of movement of the ball joint.
The ball joint allows freedom ofmovement - 6° from the axisnegating or reducing fixed points.
1. Open the clip by hand and fit it around the pipe.
2. Align the two tabs on the clipwith the ball joint and hold them in place.
3. Then slide the sleeve down and over the tabs and…. That's all there is to it!
Installation without tools
ClickEasy K.
T cap for sealing the ball joint.
BKI clip with rubber lining.
BO / BOK Connecting clipsfor 'back-to-back' type installation.
ST spreader plate.
D threaded rod.
BK pipe hangers• To hang threaded pipes, boiler
tubes and thin wall steel tubes.• Sendzimir zinc plated clip.
BKI pipe hangers• With a noise suppressing rubber lining.• For pipe dimensions in excess of
219.1 mm, a BK clip can be used with a separate rubber SR lining strip.
• Sendzimir zinc plated clip (BKI 12 electrolytically zinc plated).
LB mounting strip• The plastic covering is stuck to the
steel core so that it cannot slide.• Can be easily cut to the right length.• High mechanical tensile strength,
easy and quick to install.
SR noisesuppression strips• Noisesuppressing lining for clips.• When the SR strip is used the clip
chosen must be greater in diameter than the outside diameter of the pipe to be fitted.
BKK pipe hangers• For hanging copper pipes.• Copper bracket,
bushing and ball joint zinc plated.
BKP pipe hangers• For mounting plastic
pipework.• Clip Sendzimir
zinc plated.
T cap• Drip and dust tight seal ensures
that the ball joint retains full freedom of movement.
• Holds the sleeve tight so that you can use both hands for assembly.
BO/BOK extension pieces• To hang a BK clip
from the one above whilst maintaining flexibility in the fastening.
RD rail end cap.
R rail.
310 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
Type Ø Pipe Con-nection
Max. wor-king load[N]
Max. working
load[N]
-20 dB(A)
Strip dimensions
[mm]
Dimen-sion
A[mm]
OrderCode
Threaded Tube
Sprinkler Pipe Ø ext.
[mm]
Thin-W. Steel Pipe
Ø ext.[mm]
Copper pipe Ø ext.
[mm]
BKI 12 x 146 - 146 - - M 12 5000 2000 25 x 2.75 60 50 33250BKI 12 x 152 - 152.4 - - M 12 5000 2000 25 x 2.75 60 50 33251BKI 12 x 159 - 159 - - M 12 5000 2000 25 x 2.75 60 50 33252BKI 12 x 168 6" 168.3 - - M 12 5000 2000 25 x 2.75 60 50 33253BKI 12 x 171 - 171 - - M 12 5000 2000 25 x 2.75 60 50 33254BKI 12 x 193 - 193.7 - - M 12 5000 2000 25 x 2.75 60 25 33256BKI 12 x 219 8" 219.1 - - M 12 5000 2000 25 x 2.75 60 25 33258
* Carries KIWA certificate.
BSC Pipe Hangers
BSC clips are designed for mounting threaded pipes, sprinkler pipes, thin-walled steel pipes and copper pipes to the ceiling.
•Noise-suppressing rubber strip: 17 dB(A)* according to ISO 3822-1(*Toachievegoodsoundsuppressiondonotoverloadthefitting).
•Clip: Sendzimir zinc plated.•One-piece clip guarantees a high permissible load.•Suitable for temperatures - 40 °C to + 110 °C.•BSC pipe hangers are compatible with pipe sizes as per DIN 2448 and DIN EN 1057.•Safety load (V) = 3.
C
Ø D
Type Ø Pipe Max. working load[N]
Max. working load[N]
-17 dB(A)
Dimensions OrderCode
Nom.["]
Ext. dia.[mm]
C[mm]
ØD[mm]
BSC 3/83/8" 17.2 2000 750 12 8.5 50 33271
BSC 1/21/2" 21.3 2000 750 12 8.5 50 33272
BSC 3/43/4" 26.9 2000 750 12 8.5 50 33273
BSC 1 1" 33.7 2000 750 12 8.5 50 33274BSC 1 1/4 1 1/4" 42.3 2000 750 12 8.5 50 33275BSC 1 1/2 1 1/2" 48.3 2000 750 12 8.5 50 33276BSC 54 – 54 2000 750 12 8.5 50 33282BSC 2 2" 60.3 2000 750 12 8.5 50 33277BSC 2 1/2 2 1/2" 76.1 5000 1500 12 11 25 33278BSC 3 3" 88.1 5000 1500 12 11 25 33279BSC 110 – 110 5000 1500 12 11 25 33280BSC 4 4" 114.3 5000 1500 12 11 25 33281
EB Eye Bolts For BSC
For mounting BSC clips to the ceiling with the aid of a threaded rod.
•EB 25 - 8 and EB 25 - 10: Forged castiron, zinc plated.•EB 18 - 8: Zamac.
Type Connection OrderCode
EB 18 - 8 M 8 250 33269EB 25 - 8 M 8 250 33267EB 25 - 8 M M 8 250 33260EB 25 - 10 M 10 250 33268EB 50 - 8 M 8 250 33261
FOR ALL TYPES OF PIPE
BKI Pipe Hangers
BKI clips are designed for mounting threaded pipes, sprinkler pipes, thin-walled steel pipes and copper pipes to the ceiling. The hanger consists of a ball element, a sleeve and a one piece clip. Due to the ball element, the pipe hangers have an axialmovementofupto6°fromverticalinanydirection.Thisallowsforunrestrictedpipeexpansionduringfluctuationsintemperature, without damaging the installation. The length of the sleeve is designed to enable the pipe to be insulated even after mounting the installation, without restricting the axial movement of the ball element.
•Noise-suppressing rubber strip: 20 dB(A)* according to ISO 3822-1(*Toachievegoodsoundsuppressiondonotoverloadthefitting).
•Electrolytically zinc plated (except for clip BKI 6/8: Sendzimir zinc plated).• The one-piece clip guarantees a high permissible load.•Maximum swing of the pipe hanger: 6° from vertical in any direction.•Clips for pipe sizes 18 mm and up with provision, allowing additional clips to be installed beneath using BO connector whilst maintainingflexibility.
•BKI 12: with locking system on the inside of the sleeve.•BKI pipe hangers are compatible with pipe sizes as per DIN 2448 and DIN EN 1057.•Safety load (V) = 3.
A
Type Ø Pipe Con-nection
Max. wor-king load[N]
Max. working
load[N]
-20 dB(A)
Strip dimensions
[mm]
Dimen-sion
A[mm]
OrderCode
Threaded Tube
Sprinkler Pipe Ø ext.
[mm]
Thin-W. Steel Pipe
Ø ext.[mm]
Copper pipe Ø ext.
[mm]
BKI 6 x 12 * - - 12 12 M 6 1500 400 12 x 1.5 40 100 33008BKI 6 x 15 - - 15 15 M 6 1500 400 12 x 1.5 40 100 33009BKI 6 x 18 - - 18 18 M 6 1500 400 12 x 1.5 40 100 33001BKI 6 x 3/8
3/8" - - - M 6 1500 400 12 x 1.5 40 100 33001BKI 6 x 22 * - - - - M 6 1500 400 12 x 1.5 40 100 33014BKI 6 x 1/2
1/2" - 21.3 21.3 M 6 1500 400 12 x 1.5 40 100 33002BKI 6 x 28* - - - - M 6 1500 400 12 x 1.5 40 100 33010BKI 6 x 3/4
3/4" - 26.9 26.9 M 6 1500 400 12 x 1.5 40 100 33003BKI 6 x 35 * - - - - M 6 1500 400 12 x 1.5 40 100 33011BKI 6 x 1 1" - 33.7 33.7 M 6 1500 400 12 x 1.5 40 100 33004BKI 6 x 42 * - - - - M 6 1500 400 12 x 1.5 40 100 33012BKI 6 x 1 1/4 1 1/4" - 42.4 42.4 M 6 1500 400 12 x 1.5 40 100 33005BKI 6 x 44 - 44.5 - - M 6 1500 400 12 x 1.5 40 50 33033BKI 6 x 1 1/2 1 1/2" 48.3 - - M 6 1500 400 12 x 1.5 40 100 33006BKI 6 x 54 * - 54 - - M 6 1500 400 12 x 1.5 40 100 33013BKI 6 x 51 - 51.5 - - M 6 1500 400 12 x 1.5 40 50 33034BKI 6 x 57 - 57.5 - - M 6 1500 400 12 x 1.5 40 50 33035BKI 6 x 2 2" 60.3 - - M 6 1500 400 12 x 1.5 40 50 33007BKI 6 x 64 - 63.5 - - M 6 1500 400 12 x 1.5 40 50 33036BKI 8 x 70 - 70 - - M 8 2500 700 12 x 1.5 54 50 33137BKI 8 x 76 2 1/2" 76.1 - - M 8 2500 700 16 x 1.9 54 50 33138BKI 8 x 83 - 82.5 - - M 8 2500 700 16 x 1.9 54 50 33139BKI 8 x 89 3" 88.9 - - M 8 2500 700 16 x 1.9 54 50 33140BKI 12 x 95 - 95 - - M 12 5000 2000 25 x 2.75 60 50 33241BKI 12 x 102 3 1/2" 101.6 - - M 12 5000 2000 25 x 2.75 60 50 33242BKI 12 x 108 - 108 - - M 12 5000 2000 25 x 2.75 60 50 33243BKI 12 x 114 4" 114.3 - - M 12 5000 2000 25 x 2.75 60 50 33244BKI 12 x 121 - 121 - - M 12 5000 2000 25 x 2.75 60 50 33245BKI 12 x 127 - 127 - - M 12 5000 2000 25 x 2.75 60 50 33246BKI 12 x 133 - 133 - - M 12 5000 2000 25 x 2.75 60 50 33247BKI 12 x 140 5" 139.7 - - M 12 5000 2000 25 x 2.75 60 50 33248
311
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
Type Ø Pipe Con-nection
Max. wor-king load[N]
Max. working
load[N]
-20 dB(A)
Strip dimensions
[mm]
Dimen-sion
A[mm]
OrderCode
Threaded Tube
Sprinkler Pipe Ø ext.
[mm]
Thin-W. Steel Pipe
Ø ext.[mm]
Copper pipe Ø ext.
[mm]
BKI 12 x 146 - 146 - - M 12 5000 2000 25 x 2.75 60 50 33250BKI 12 x 152 - 152.4 - - M 12 5000 2000 25 x 2.75 60 50 33251BKI 12 x 159 - 159 - - M 12 5000 2000 25 x 2.75 60 50 33252BKI 12 x 168 6" 168.3 - - M 12 5000 2000 25 x 2.75 60 50 33253BKI 12 x 171 - 171 - - M 12 5000 2000 25 x 2.75 60 50 33254BKI 12 x 193 - 193.7 - - M 12 5000 2000 25 x 2.75 60 25 33256BKI 12 x 219 8" 219.1 - - M 12 5000 2000 25 x 2.75 60 25 33258
* Carries KIWA certificate.
BSC Pipe Hangers
BSC clips are designed for mounting threaded pipes, sprinkler pipes, thin-walled steel pipes and copper pipes to the ceiling.
•Noise-suppressing rubber strip: 17 dB(A)* according to ISO 3822-1(*Toachievegoodsoundsuppressiondonotoverloadthefitting).
•Clip: Sendzimir zinc plated.•One-piece clip guarantees a high permissible load.•Suitable for temperatures - 40 °C to + 110 °C.•BSC pipe hangers are compatible with pipe sizes as per DIN 2448 and DIN EN 1057.•Safety load (V) = 3.
C
Ø D
Type Ø Pipe Max. working load[N]
Max. working load[N]
-17 dB(A)
Dimensions OrderCode
Nom.["]
Ext. dia.[mm]
C[mm]
ØD[mm]
BSC 3/83/8" 17.2 2000 750 12 8.5 50 33271
BSC 1/21/2" 21.3 2000 750 12 8.5 50 33272
BSC 3/43/4" 26.9 2000 750 12 8.5 50 33273
BSC 1 1" 33.7 2000 750 12 8.5 50 33274BSC 1 1/4 1 1/4" 42.3 2000 750 12 8.5 50 33275BSC 1 1/2 1 1/2" 48.3 2000 750 12 8.5 50 33276BSC 54 – 54 2000 750 12 8.5 50 33282BSC 2 2" 60.3 2000 750 12 8.5 50 33277BSC 2 1/2 2 1/2" 76.1 5000 1500 12 11 25 33278BSC 3 3" 88.1 5000 1500 12 11 25 33279BSC 110 – 110 5000 1500 12 11 25 33280BSC 4 4" 114.3 5000 1500 12 11 25 33281
EB Eye Bolts For BSC
For mounting BSC clips to the ceiling with the aid of a threaded rod.
•EB 25 - 8 and EB 25 - 10: Forged castiron, zinc plated.•EB 18 - 8: Zamac.
Type Connection OrderCode
EB 18 - 8 M 8 250 33269EB 25 - 8 M 8 250 33267EB 25 - 8 M M 8 250 33260EB 25 - 10 M 10 250 33268EB 50 - 8 M 8 250 33261
312 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
FOR STEEL PIPES
BK M 6 Pipe Hangers
BK clips are designed for mounting steel pipes to the ceiling. The hanger consists of a ball element, a sleeve and a one piece clip. Due to the ball element, the pipe hangers have an axial movement of 6° in any plane. This allows for unrestricted pipe expansionduringfluctuationsintemperaturewithoutdamagingtheinstallation.The length of the sleeve is designed to enable the pipe to be insulated even after mounting the suspension without restricting the axial movement of the ball element.
•Electrolytically zinc plated (except for clip BK 6/8: Sendzimir zinc plated).• The one-piece clip guarantees a high permissible load.•Maximum swing of the pipe hanger: 6° from vertical in any direction.•Clips for pipe sizes 25 mm and up with provision allowing additional clips to be installed beneath using BO connector whilst maintainingflexibility.
•BK 12: with locking system on the inside of the sleeve.•BK pipe hangers are compatible with pipe sizes as per DIN 2448.•Safety load (V) = 3.•Rubber washer to keep sleeve positioned during mounting clip around pipe.
A
6° 6°
Type Ø Pipe Connection Max. working
load[N]
Strip dimensions
[mm]
T cap DimensionA
[mm]
OrderCode
Sprinkler Pipe
Ø ext.[mm]
Threaded Tube
Thin-W. Steel Pipe
Ø ext.[mm]
BK 6 x 15 - - 15 M 6 1500 12 x 1.5 T 6 32 250 32109BK 6 x 42 - - 42 M 6 1500 12 x 1.5 T 6 32 250 32105BK 6 x 18 - 18 M 6 1500 12 x 1.5 T 6 32 250 32101BK 6 x 3/8
3/8" - M 6 1500 12 x 1.5 T 6 32 250 32101BK 6 x 22 - - 22 M 6 1500 12 x 1.5 T 6 32 250 32102BK 6 x 1/2 - 1/2" - M 6 1500 12 x 1.5 T 6 32 250 32102BK 6 x 25 25.9 - - M 6 1500 12 x 1.5 T 6 32 250 32130BK 6 x 3/4 - 3/4" - M 6 1500 12 x 1.5 T 6 32 250 32103BK 6 x 28 - - 28 M 6 1500 12 x 1.5 T 6 32 250 32110BK 6 x 30 32 - - M 6 1500 12 x 1.5 T 6 32 250 32131BK 6 x 1 - 1" - M 6 1500 12 x 1.5 T 6 32 250 32104BK 6 x 35 - - 35 M 6 1500 12 x 1.5 T 6 32 250 32111BK 6 x 38 38 - - M 6 1500 12 x 1.5 T 6 32 250 32132BK 6 x 1 1/4 - 1 1/4" - M 6 1500 12 x 1.5 T 6 32 250 32105BK 6 x 44 45 - - M 6 1500 12 x 1.5 T 6 32 250 32133BK 6 x 1 1/2 - 1 1/2" - M 6 1500 12 x 1.5 T 6 32 250 32106BK 6 x 51 51 - - M 6 1500 12 x 1.5 T 6 32 250 32134BK 6 x 57 57 - - M 6 1500 12 x 1.5 T 6 32 50 32135BK 6 x 2 - 2" - M 6 1500 12 x 1.5 T 6 32 50 32107BK 6 x 62 62 - - M 6 1500 12 x 1.5 T 6 32 50 32137BK 6 x 64 64 - - M 6 1500 12 x 1.5 T 6 32 50 32136
313
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
BK M8 Pipe Hangers
Type Sprinkler Pipe
Ø ext.[mm]
Threaded Tube
Thin-W. Steel Pipe
Ø ext.[mm]
Connection Max. working
load[N]
Strip dimensions
[mm]
T cap DimensionA
[mm]
OrderCode
BK 8 x 15 - - 15 M 8 1500 12 x 1.5 T 8S 32 250 32209BK 8 x 3/8 - 3/8" - M 8 1500 12 x 1.5 T 8S 32 250 32201BK 8 x 18 - - 18 M 8 1500 12 x 1.5 T 8S 32 250 32201BK 8 x 1/2 - 1/2" - M 8 1500 12 x 1.5 T 8S 32 250 32202BK 8 x 22 - - 22 M 8 1500 12 x 1.5 T 8S 32 250 32202BK 8 x 3/4 - 3/4" M 8 1500 12 x 1.5 T 8S 32 250 32203BK 8 x 28 - - 28 M 8 1500 12 x 1.5 T 8S 32 250 32210BK 8 x 1 - 1" M 8 1500 12 x 1.5 T 8S 32 250 32204BK 8 x 35 - - 35 M 8 1500 12 x 1.5 T 8S 32 250 32211BK 8 x 42 - - 42 M 8 1500 12 x 1.5 T 8S 32 250 32205BK 8 x 1 1/4 - 1 1/4" - M 8 1500 12 x 1.5 T 8S 32 250 32205BK 8 x 44 44.5 - - M 8 1500 12 x 1.5 T 8S 32 250 32233BK 8 x 1 1/2 - 1 1/2" - M 8 1500 12 x 1.5 T 8S 32 250 32206BK 8 x 51 51.9 - - M 8 1500 12 x 1.5 T 8S 32 250 32234BK 8 x 57 57.9 - - M 8 1500 12 x 1.5 T 8S 32 50 32235BK 8 x 2 - 2" - M 8 1500 12 x 1.5 T 8S 32 50 32207BK 8 x 64 63.5 - - M 8 1500 12 x 1.5 T 8S 32 50 32236BK 8 x 70 70 - - M 8 2500 16 x 1.9 T 8S 54 50 32237BK 8 x 76 76.1 2 1/2" - M 8 2500 16 x 1.9 T 8S 54 50 32238BK 8 x 78 78 - - M 8 2500 16 x 1.9 T 8S 54 50 32280BK 8 x 83 82.5 - - M 8 2500 16 x 1.9 T 8S 54 50 32239BK 8 x 89 88.9 3" - M 8 2500 16 x 1.9 T 8S 54 50 32240BK 8 x 90 90 - - M 8 2500 16 x 1.9 T 8S 54 50 32281BK 8 x 95 95 - - M 8 2500 16 x 1.9 T 8S 54 50 32241BK 8 x 102 102 3 1/2" - M 8 2500 16 x 1.9 T 8S 54 50 32242
BK M12 Pipe Hangers
Type Threaded Tube
Sprinkler Pipe Ø ext.
[mm]
Thin-W. Steel Pipe
Ø ext.[mm]
Connection Max. working
load[N]
Strip dimensions
[mm]
T cap DimensionA
[mm]
OrderCode
BK 12 x 108 - 108 - M 12 5000 25 x 2.75 T 12 60 50 32343BK 12 x 114 4" 114.3 - M 12 5000 25 x 2.75 T 12 60 50 32344BK 12 x 121 - 121 - M 12 5000 25 x 2.75 T 12 60 50 32345BK 12 x 127 - 127 - M 12 5000 25 x 2.75 T 12 60 50 32346BK 12 x 133 - 133 - M 12 5000 25 x 2.75 T 12 60 50 32347BK 12 x 140 5" 139.7 - M 12 5000 25 x 2.75 T 12 60 50 32349BK 12 x 146 - 146 - M 12 5000 25 x 2.75 T 12 60 50 32350BK 12 x 152 - 152.4 - M 12 5000 25 x 2.75 T 12 60 50 32351BK 12 x 159 - 159 - M 12 5000 25 x 2.75 T 12 60 50 32352BK 12 x 168 6" 168.3 - M 12 5000 25 x 2.75 T 12 60 50 32353BK 12 x 171 - 171 - M 12 5000 25 x 2.75 T 12 60 50 32354BK 12 x 178 - 177.8 - M 12 5000 25 x 2.75 T 12 60 50 32355BK 12 x 193 - 193.7 - M 12 5000 25 x 2.75 T 12 60 50 32357BK 12 x 216 - 216 - M 12 5000 25 x 2.75 T 12 60 50 32358BK 12 x 219 8" 219.1 - M 12 5000 25 x 2.75 T 12 60 50 32359
314 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
FOR COPPER PIPES
BKK Pipe Hangers
BKK pipe hangers are designed for mounting copper pipes to the ceiling. The hanger consists of a ballelement, a sleeve and a one piece clip. Due to the ball element, the pipe hangers have an axial movementofupto6°fromverticalinanydirection.Thisallowsforunrestrictedpipeexpansionduringfluctuationsintemperature,withoutdamaging the installation. The length of the sleeve is designed to enable the pipe to be insulated even aftermounting the installation, without restricting the axial movement of the ball element.
•Clip: copper.•Sleeve and ball element: electrolytically zinc plated.•One-piece clip guarantees a high permissible load.•Maximum swing of pipe hanger: 6° from vertical in any direction.•Clips for pipe sizes 22 mm and up with provision, allowing additional clips to be installed beneath using BO connector whilst maintainingflexibility.
•BKK pipe hangers are compatible with pipe sizes as per DIN EN 1057.
A
Type Ø Pipe ext. dia.[mm]
Connection Max. working load[N]
Stripdimensions
[mm]
DimensionA
[mm]
OrderCode
BKK 6 x 12 * 12 M 6 650 12 x 1.5 32 10 34110BKK 6 x 14 14 M 6 650 12 x 1.5 32 10 34111BKK 6 x 15 * 15 M 8 650 12 x 1.5 32 10 34112BKK 6 x 18 18 M 6 650 12 x 1.5 32 10 34114BKK 6 x 22 * 22 M 6 650 12 x 1.5 32 10 34116BKK 6 x 28 * 28 M 6 650 12 x 1.5 32 10 34118BKK 6 x 35 * 35 M 6 650 12 x 1.5 32 10 34120BKK 6 x 42 * 42 M 6 650 12 x 1.5 32 10 34122BKK 6 x 54 * 54 M 6 650 12 x 1.5 32 10 34124BKK 8 x 68 68 M 8 1000 16 x 1.9 54 10 34226BKK 8 x 70 70 M 8 1000 16 x 1.9 54 10 34237BKK 8 x 76 78 M 8 1000 16 x 1.9 54 10 34238BKK 8 x 80 80 M 8 1000 16 x 1.9 54 10 34227BKK 8 x 102 102 M 8 1000 16 x 1.9 54 10 34260BKK 12 x 108 108 M 12 2000 16 x 1.9 60 25 34343BKK 12 x 133 133 M 12 2000 16 x 1.9 60 25 34347BKK 12 x 159 159 M 12 2000 16 x 1.9 60 25 34352
* Carries KIWA certificate.
315
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
FOR PLASTIC PIPES
BKP Pipe Hangers
BKP pipe hangers are designed for mounting plastic waste pipes to the ceiling. •BKI 6/8 clip: sendzimir zinc plated.•Sleeve: electrolytically zinc plated.•Ball element: electrolytically zinc plated.•One-piece clip guarantees a high permissible load.•Maximal swing of pipe hanger: 6° from vertical.
AType Ø Pipe
ext. dia.[mm]
Connection Max. working load[N]
Strip dimensions
[mm]
DimensionA
[mm]
OrderCode
BKP 6 x 40 40 M 6 1500 12 x 1.5 32 50 32433BKP 6 x 50 50 M 6 1500 12 x 1.5 32 50 32434BKP 6 x 63 63 M 6 1500 12 x 1.5 32 50 32436BKP 6 x 75 75 M 6 1500 12 x 1.5 32 50 32438BKP 6 x 90 90 M 6 1500 12 x 1.5 32 50 32441BKP 6 x 110 110 M 6 1500 12 x 1.5 32 50 32444BKP 6 x 125 125 M 6 1500 12 x 1.5 32 50 32446BKP 8 x 140 140 M 8 2500 16 x 1.9 54 50 32549BKP 8 x 160 160 M 8 2500 16 x 1.9 54 10 32553BKP 8 x 200 200 M 8 2500 16 x 1.9 54 10 32570
316 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
PIPE HANGER ACCESSORIES
BO/BOK Extension Pieces
BO/BOK extension pieces are designed for hanging various Flamco pipe hangers below each other.
•Electrolytically zinc plated (except for BOK extension piece: copper).• Flexible suspension is retained.•Safety load (V) = 3.
N.B.: The size of the upper pipe hanger determines the choice of the correct extension piece.
A
Type Connection Max. working load[N]
DimensionA
[mm]
OrderCode
BO 6 M 6 1500 37 250 80201BO 8 M 8 2500 55 250 80202BO 12 M 12 5000 56 250 80204BOK 6 M 6 600 37 250 80211BOK 8 M 8 750 35 250 80212
T Caps
Preventsmoistureanddustfromenteringtheballelement,sothattheaxialmovementisunrestricted.Duringfitting,thecapcan hold the sleeve, so that both hands are free.
•Material: PVC.•Colour: black.
A
B
C
Type Suitable for threaded rod
Dimensions OrderCode
A[mm]
B[mm]
ØC[mm]
T 6 D 6 6 30.5 15 50 70501T 8 D 8 8 32.5 15 50 70502T 8 s D 8 8 37.5 21 50 70512T 12 D 12 12 57 30 50 70504
317
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
ST Spreader Plates
Dd
A
Type Suitable for BK clip Dimensions OrderCode
A[mm]
d[mm]
D[mm]
ST 70 - 83 70 - 83 154 1 70 50 80508ST 89 - 102 89 - 102 200 1 89 50 80510ST 108 - 127 108 - 127 200 1 108 50 80512ST 133 - 152 133 - 152 250 1 133 50 80513ST 159 - 178 159 - 178 250 1 159 50 80514ST 193 - 219 193 - 219 333 1 193 25 80516ST 241 - 267 241 - 267 480 1 241 1 80518ST 273 - 299 273 - 299 480 1 273 1 80519ST 323 - 355 323 - 355 480 1 323 1 80520
318 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
Your Supplier for Specialist Sprinklersystem SupportsFlamco offers three different clips for hanging sprinkler system tubes: the BKS, BES and BCS clips. The BCS, the BKS and certain of the BES clips are FM approved. Some of the BES clips are also available with a VdS mark.
In addition, BES and BCS clips are also UL approved. All these clips can be fitted easily, without tools, and stand out due to their excellent finish.
BES Benefits• The one-piece clip guarantees a
high permissible load.• The special clasp mechanism
makes it easy to pre-assemble.• The height of the mechanism can
be adjusted. • Depending on type, FM, VdS and
UL approved.• Heavy duty quality.
BCS Benefits• The one piece clip guarantees a
high permissible load.• The height of the mechanism can
be adjusted.• FM/UL approved load bearing.
BKS Benefits• The one piece clip guarantees a
high permissible load.• FM approved.• Rigid mechanism mounting.• FM approved finish with extra
locknut.
Flamco clips have been used in sprinkler systems across the world for many years to the satisfaction of installers, customers and approval bodies. A fact you can rely on now and in the future.
The distance from the soffit can be adjusted by screwing the threaded rod in or out.
Locknut.
BKS clip.
Locknut(VdS only).
BES clip.
ULLISTED
319
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
Your Supplier for Specialist Sprinklersystem SupportsFlamco offers three different clips for hanging sprinkler system tubes: the BKS, BES and BCS clips. The BCS, the BKS and certain of the BES clips are FM approved. Some of the BES clips are also available with a VdS mark.
In addition, BES and BCS clips are also UL approved. All these clips can be fitted easily, without tools, and stand out due to their excellent finish.
BES Benefits• The one-piece clip guarantees a
high permissible load.• The special clasp mechanism
makes it easy to pre-assemble.• The height of the mechanism can
be adjusted. • Depending on type, FM, VdS and
UL approved.• Heavy duty quality.
BCS Benefits• The one piece clip guarantees a
high permissible load.• The height of the mechanism can
be adjusted.• FM/UL approved load bearing.
BKS Benefits• The one piece clip guarantees a
high permissible load.• FM approved.• Rigid mechanism mounting.• FM approved finish with extra
locknut.
Flamco clips have been used in sprinkler systems across the world for many years to the satisfaction of installers, customers and approval bodies. A fact you can rely on now and in the future.
The distance from the soffit can be adjusted by screwing the threaded rod in or out.
Locknut.
BKS clip.
Locknut(VdS only).
BES clip.
ULLISTED
320 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
FOR SPRINKLER SYSTEMS
BKS Pipe Hangers
BKS pipe hangers are designed for mounting sprinkler system pipes to the ceiling.
• FM-approvedandNFPAregulationsverifiedbyMetaalinstituutTNO.•Electrolytically zinc plated (except for clip BKS 10: Sendzimir zinc plated).•Washer only supplied from 2 ½".•One-piece clip guarantees a high permissible load.•Rigid fastening.• FMfinishingwithextralockingnut.
L1
L3L2
Type Ø PipeNom.
["]
Connection Min. test failure load *
[N]
Stripdimensions
[mm]
Dimensions OrderCode
L1min.[mm]
L2min.[mm]
L3min.[mm]
BKS 10 x 3/43/4" M 10 1512 12 x 1.5 87 104 72 100 35203
BKS 10 x 1 1" M 10 1824 12 x 1.5 87 107 75 100 35204BKS 10 x 1 1/4 1 1/4" M 10 1913 12 x 1.5 87 111 79 100 35205BKS 10 x 1 1/2 1 1/2" M 10 2313 12 x 1.5 87 114 82 100 35206BKS 10 x 2 2" M 10 2815 12 x 1.5 87 120 88 100 35207BKS 10 x 76 2 1/2" M 10 4181 16 x 1.9 132 173 111 50 35238BKS 10 x 89 3" M 10 4715 16 x 1.9 132 180 118 50 35240BKS 10 x 102 3 1/2" M 10 5583 16 x 1.9 132 186 124 50 35242BKS 12 x 114 4" M 12 6561 25 x 2.75 186 242 180 50 35344BKS 12 x 140 5" M 12 8896 25 x 2.75 190 260 198 50 35349BKS 12 x 168 6" M 12 11632 25 x 2.75 195 279 217 50 35353BKS 12 x 219 8" M 12 16903 25 x 2.75 210 320 258 50 35359
* Min. breaking load under to FM regulations.
321
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
BES Pipe Hangers
A
Type Ø Pipe Connection Approval Min. test failure load* Strip dimensions[mm]
OrderCode
Nom.["]
Ext. dia.
[mm]
UL FM VdS UL[N]
FM[N]
VdS[N]
BES 8 x 3/43/4" 26.9 M 8 - - 4 - - 4000 25 x 1.5 50 35753
BES 8 x 1 1" 33.7 M 8 - - 4 - - 4000 25 x 1.5 50 35754BES 8 x 1 1/4 1 1/4" 42.4 M 8 - - 4 - - 4000 25 x 1.5 50 35755BES 8 x 1 1/2 1 1/2" 48.3 M 8 - - 4 - - 4000 25 x 1.5 50 35756BES 8 x 2 2" 60.3 M 8 - - 4 - - 4000 25 x 1.5 50 35757BES 10 x 3/4
3/4" 26.9 M 10 4 4 - 3336 1512 - 25 x 1.25 100 35703BES 10 x 1 1" 33.7 M 10 4 4 - 3336 1824 - 25 x 1.25 100 35704BES 10 x 1 1/4 1 1/4" 42.4 M 10 4 4 - 3336 1913 - 25 x 1.25 100 35705BES 10 x 1 1/2 1 1/2" 48.3 M 10 4 4 - 3336 2313 - 25 x 1.25 100 35706BES 10 x 2 2" 60.3 M 10 4 4 - 3336 2815 - 25 x 1.25 100 35707BES 10 x 2 1/2 2 1/2" 76.1 M 10 4 4 4 3781 4181 7000 25 x 2.5 50 35708BES 10 x 3 3" 88.9 M 10 4 4 4 4670 4715 7000 25 x 2.5 50 35709BES 10 x 3 1/2 3 1/2" 101.6 M 10 4 4 4 5560 5583 7000 25 x 2.5 50 35710BES 10 x 108 - 108 M 10 - 4 4 - 6055 7000 25 x 2.5 50 35711BES 10 x 114 4" 114.3 M 10 4 4 4 6672 6561 7000 25 x 2.5 50 35712BES 12 x 133 - 133 M 12 - 4 4 - 8534 10000 30 x 2.5 50 35713BES 12 x 140 5" 139.7 M 12 4 4 4 8896 8896 10000 30 x 2.5 50 35714BES 12 x 159 - 159 M 12 - 4 4 - 11104 10000 30 x 2.5 50 35715BES 12 x 168 6" 168.9 M 12 4 4 4 11787 11632 10000 30 x 2.5 50 35716BES 12 x 219 8" 219.1 M 12 4 4 - 18014 16903 - 30 x 2.5 25 35717BES 16 x 219 8" 219.1 M 16 - - 4 - - 17000 37 x 3.0 25 35767
* Min. breaking load under to FM/UL/VdS regulations.
322 Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
BCS Pipe Hangers
BCS pipe hangers are designed for mounting sprinkler system pipes to the ceiling.
•Sendzimir zinc plated (except 8": electrolytically zinc plated)•Support nut M 10 up to 4", M 12 up to 8".•Mounting without any tools.•Adjustable in height.•UL/FM Approved.
Type Ø Pipe Con-nection
Max. load *
[N]
Adjustable height[mm]
Slotted hole[mm]
Strip dimensions
[mm]
OrderCode
Nom.["]
Ext. dia.[mm]
BCS M 10 x 3/43/4" 26.9 M 10 1512 35 - 20 x 1 100 35770
BCS M 10 x 1 1" 33.7 M 10 1824 35 - 20 x 1 100 35771BCS M 10 x 1 1/4 1 1/4" 42.4 M 10 1913 35 - 20 x 1 100 35772BCS M 10 x 1 1/2 1 1/2" 48.3 M 10 2313 35 - 20 x 1 100 35773BCS M 10 x 2 2" 60.3 M 10 2815 35 - 20 x 1 100 35774BCS M 10 x 2 1/2 2 1/2" 76.1 M 10 4181 40 27 x 12 25 x 1.25 100 35775BCS M 10 x 3 3" 88.9 M 10 4715 40 27 x 12 25 x 1.25 50 35776BCS M 10 x 3 1/2 3 1/2" 101.6 M 10 5583 49 27 x 12 25 x 1.25 50 35777BCS M 10 x 4 4" 114.3 M 10 6561 60 27 x 12 25 x 1.25 50 35778BCS M 12 x 5 5" 139.7 M 12 8896 73 60 x 15 30 x 2 50 35779BCS M 12 x 6 6" 168.9 M 12 11632 83 60 x 15 30 x 2 50 35780BCS M 12 x 8 8" 219.1 M 12 16903 85 60 x 15 30 x 3 25 35781
* Min. breaking load according to UL/FM regulations.
BDS clips
Type Ø Pipe Con-nection
Stripdimensions
(mm)
Max. load *
(N)
OrderCode
Nom.(mm)
Ext. dia.(mm)
BDS 1/21/2" 20 - 23 M 10 25 / 2.5 2000 50 38150
BDS 3/43/4" 25 - 30 M 10 25 / 2.5 2000 50 38151
BDS 1 1" 31 - 35 M 10 25 / 2.5 2000 50 38152BDS 1 1/2 1 1/2" 48 - 53 M 10 25 / 2.5 2000 50 38154BDS 1 1/4 1 1/4" 40 - 45 M 10 25 / 2.5 2000 50 38153BDS 2 2" 60 - 65 M 10 25 / 2.5 2000 50 38155BDS 2 1/2 2 1/2" 76 - 81 M 10 30 / 3.0 3500 50 38156BDS 3 3" 88 - 94 M 10 30 / 3.0 3500 50 38157BDS 4 4" 110 - 116 M 10 30 / 3.0 3500 50 38159BDS 5 5" 133 - 140 M 12 40 / 4.0 5000 50 38161BDS 6 6" 159 - 165 M 12 40 / 4.0 5000 50 38162BDS 7 7" 167 - 173 M 12 40 / 4.0 5000 50 38163BDS 8 8" 219 - 226 M 16 40 / 4.0 5000 50 38164BDS 100 102 - 108 M 10 30 / 3.0 3500 50 38158BDS 127 124 - 129 M 10 30 / 3.0 3500 50 38160
* Min. breaking load according to VdS regulations.
323
Pipe Hangers
Product overview • 2013 We reserve the right to change designs and technical specifications of our products.
12
MOUNTING STRIPS
LB Mounting Strip
Type Dimensions Roll[m]
Max. working load[N]
OrderCode
Width[mm]
Perforations[mm]
LB 17 17 Ø 6.5 25 - 1 71020LB 17 plasticized in cassette 17 6.5 10 800 1 71015LB 17 plasticized in cassette 17 6.5 10 800 1 71016LB 19 galvanized 19 6.5 10 800 1 71021LB 27 27 Ø 8.5 10 - 1 71022
EB-LB Eye Bolts
For easy mounting of LB mounting strip to the ceiling.
•Electrolytically zinc plated.NB.: EB 6 x 25 recommended for LB 27.
Type Characteristics Connection OrderCode
EB 6 x 25 Screw thread and slotted hole M 6 x 25 100 71024EB 6 x 50 Wood screw thread and
slotted holeM 6 x 50 100 71023
EB 8 x 20 Screwthread and round hole M 8 x 20 100 71027
HM Mounting Strip Accessories
For easy mounting of LB mounting strip to the ceiling.
•Electrolytically zinc plated.•Nut and bolt together.
Note.: EB 6 x 25 recommended for LB 27.
Type Characteristics Connection OrderCode
HM 6 x 20 Hexagonal head bolt M 6 x 20 100 71028HM 8 x 20 Cylinder head bolt M 8 x 20 100 71029