12 STEPS TO SERVICING & LOADING A LAWN TRACTOR

PUSH THE UNIT OUTSIDE.

CHECK THE OIL.

ADD JUST ENOUGH GAS TO START AND TEST THE UNIT.

ASK CUSTOMER FOR THE LOAD OUT RECEIPT, AND ASK CUSTOMER TO MAKE SURE THE VEHICLE IS IN PARK, AND TO SET THE PARKING BRAKE. AT THIS TIME YOU CAN PUT THE RAMPS DOWN.

INSPECT RAMPS FOR SAFETY STRAPS.

STRAPS SHOULD BE ATTACHED TO VEHICLE AND TIGHTENED SO RAMPS WILL NOT SLIDE OFF.

NOW YOU MAY LOAD THE UNIT. RIDING MOWERS WILL REQUIRE 3 PEOPLE TO LOAD SAFELY.

ONE PERSON ON EACH SIDE, AND ONE BEHIND THE UNIT.

MOST UNITS WILL REQUIRE TO BE LIFTED ONCE IT GETS TO THE TOP. DON’T FORGET, “OK GUYS, WE WILL LIFT ON 3, 1-2-3 LIFT”.

PUSH UNIT FORWARD AS FAR AS IT WILL GO. YOU CAN PUT SOME CARDBOARD BETWEEN

THE FRONT OF THE MOWER AND THE TRUCK.

MAKE SURE PARKING BREAK IS SET! SHUT THE TAILGATE.

IF TAILGATE WILL NOT SHUT, THE CUSTOMER WILL NEED TO PURCHASE STRAPS. (EASY ADD-ON

SALE.) SUGGEST STRAPS TO ALL CUSTOMERS, EVEN IF TAILGATE SHUTS.

NOTES:

• THE CUSTOMER IS RESPONSIBLE FOR STRAPPING THE UNIT DOWN.

• THANK THE CUSTOMER FOR THEIR BUSINESS.

NEVER ATTEMPT TO DRIVE A LAWN TRACTOR/MOWER UP THE RAMPS TO LOAD OR

UNLOADING