12:00 Presenter name: Josef Feuerstein Co Presenter ......Presentation date: 08.10.2019 11:00...

Presentation date: 08.10.2019 11:00 – 12:00

Presenter name: Josef Feuerstein

Co Presenter: Sascha Güth

Room name: Estrel Hall C5+6

Presentation title: PLM Performance measuring & monitoring

Your name/Company® PLM Europe 2018 – All rights reserved Your name/Company

Silte: 2©addPLM - GmbH: [addPLM-PLMPerformanceAnalyse_Praesentation_en_PLMEurope2019.pptx] (J.Fes/S.Gueth) Last Update: [19.11.2019] Output Date: 14.01.2020

Introduction

Siemens Healthineers started in March 2016 to

introduce systematic performance measurements

in their TC/NX system.

The goal was to determine objective values for the

performance behavior of NX assemblies.


Presentation Abstract / Introduction

PLM Performance Analyse Setup

Basics data collection

Basics measurement data

Overview PLM Performance Analyse

Summery


PLM – Performance Analyse Overview

Presentation Abstract

PLM Performance measuring & monitoring

Abstract:

All complex software solutions are evaluated in addition to the software quality,

especially on performance behaviour. The software performance is perceived

as a “felt speed” by almost all users.

Experience has shown that the performance changes / decreases permanently

and that this is perceived, discussed and criticized only after a reduction of

30% -50%. This often leads to unusable statements that make it difficult to

improve the performance of the system.

You will learn:

how to measure continuously PLMSystem performance. How it helps you to

monitor and to analyse specific performance.

Additional we show how the customer Siemens Healthineers is using and

improving there system with the help of our solution PLMPerformance Analyse.







Summery



Measuring loading time of 3 different NX assemblies on 8 locations

- Assemblies:

Normal

8 levels – 191 components

Large


bigger prt files then normal

xLarge








Summery


PLMPerfClient

PLMPerfClient

PLMPerfClient

PLMPerfClient

Acquire of measurement data: system sketch

PLMPerfDB

System overview

1. JobServer (JS1): distributes the PLMPerf Jobs to the JobClients (JC1…JCN)

2. JobClient (JC1…JCN): executes the PLMPerf Job (NXJournal) and stores the results .csv file

3. PLMPerf Analyse: imports the measured data from the share (3) and presents in in the GUI

JC1

JC2

Forchheim

Site …Erlangen

Berkeley

JCN

Import

JC3

Share 2

P1

3

1

4

JS1

Sending Jobs Sending Jobs



The following Locations are in scope of measuring:

▪ Erlangen Germany

▪ Forchheim Germany

▪ Kemnath Germany

▪ Oxford England

▪ Shanghai China

▪ Shenzhen China

▪ Flanders USA

▪ Berkeley USA


Acquire of measurement data: Locations are in scope of measuring

▪Erlangen Germany


▪Kemnath Germany

▪Oxford England

▪ Flanders USA

▪Berkeley USA

▪Shanghai China

▪Shenzhen China


Measurement data recording

Process of data collection:

The measured data is recorded by an automatic start of NX on the different sites (1..3) and stored in central

directories (4). These processes can be controlled via the Windows Task Scheduler or via the PLMJobManager.

The performance analysis imports the measured data from the directories into the database (6) via batch (5). Now

the data are available for the analysis.

PLM Performance

Analyse

database

1

2

3

4 6

…

CALL %UGII_ROOT_DIR%\run_journal.exe" -pim -u=.. -p=.. -g=.. PerfJournal.vb

CALL PLMPerfCmd.exe –i=NxSyslog.syslog5







Summery


Loading performance measurement data source

Folie 14

MessungNr;Datum;Zeit;Users;LoadUpdCpuReal;LoadUpdCpu;TotalReal…

1;04.10.2011;06:11:56;85;18,580;5,594;40,67;22,12;15,43;11,81

2;04.10.2011;06:11:56;85;17,623;5,703;24,64;11,39;4,20;1,07

3;04.10.2011;06:11:56;85;17,921;5,781;25,44;12,14;4,70;1,42

1;04.10.2011;06:41:21;83;16,820;5,843;24,86;11,97;4,67;1,53

2;04.10.2011;06:41:21;83;12,596;6,125;24,33;11,54;4,29;1,03

MessungNr: Measuring point number of the measurement series

Datum;Zeit: Time of the measurement process (end)

Users: Number of TC users during the measurement

LoadUpdCpuReal: value displayed in the graph


Structure ping statistics

***** Ping-Statistik ******

Datum;Uhrzeit;Sender;Empfänger;gesendet;empfangen;verloren;Minimum;Maximum;Mittelwert

14.10.2011;00:54:16;FCAD50657;ORA_IM9W;20;20;0;7;25;7;

14.10.2011;00:55:19;FCAD50657;ORA_IM9W;20;20;0;7;17;8;

14.10.2011;00:56:19;FCAD50657;ORA_IM9W;20;20;0;7;13;7;

14.10.2011;00:57:19;FCAD50657;ORA_IM9W;20;20;0;7;16;9;

Datum;Uhrzeit: Time of the measurement

Sender: Name of the client that has send the ping

Empfänger: Name of the server which received the ping

gesendet: is only stored in DB, not in use

empfangen: is only stored in DB, not in use

verloren: is only stored in DB, not in use

Minimum: is only stored in DB, not in use

Maximum: is only stored in DB, not in use

Mittelwert: This values are displayed in the graphical view as yellow dots







Summery


loading time of 3 NX assemblies on same locations


Measurement on 8 different locations


Measurement over time

Measurements from 21.07.2017 to 05.09.2019


Siemens Healthineers analyse performance issue

1. Ping in Shenzhen is better (lower) than in Shanghai

2. But assembly load performance in Shenzhen is worst (higher) than in Shanghai

3. After editing the FMS configuration in Shenzhen that load performance is slightly better than in Shanghai which

corresponds to the expected result







Summery


Summary

The automatic discovery of performance data has the following advantages :

✓ The measurements treat objectively the evaluation of the performance

✓ "indirectly" the entire PLM IT infrastructure is analyzed as all systems are

addressed by the measurement

✓ Smaller performance differences which infiltrates to the systems are recorded

systematically and time based. The time based measurement has the great

advantage that e.g. performance impacts due to changes in the IT system or to the

Software can be understood in a better way

✓ The system informs the administrators via email when high values are measured

The software has been developed for KBA

and is in use since 2006.

Contact us:

Josef Feuerstein [email protected]

Sascha Güth [email protected]

mailto:[email protected]:[email protected]

www.plm-europe.orgwww.siemens.com/plm

08 October 2019

THANK YOU FOR YOUR ATTENTION

Visit us at the Exhibition Hall Market PLACE #50D

addPLM - GmbH
http://www.plm-europe.org/http://www.siemens.com/plm

Date post:	15-Feb-2021
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

12:00 Presenter name: Josef Feuerstein Co Presenter ......Presentation date: 08.10.2019 11:00...

Documents