Date post: | 03-Jun-2018 |
Category: |
Documents |
Upload: | rupesh-kumar |
View: | 237 times |
Download: | 0 times |
of 26
8/12/2019 1234 Rupesh
1/26
Siddaganga Institute of TechnologyTumkur 572103
ELECTRICAL AND ELECTRONICS ENGG.
DEVELOPEMENT OF A MEDICAL REHABILITATION
AID.GUIDED BY:-
Madhu B.M.
Assistant Professor
BY:-
RAJVARDHAN
RAM MOHAN
ROHIT KUMAR
RUPESH KUMAR
8/12/2019 1234 Rupesh
2/26
Gives indication about extra pressure onoperated leg or hip.
An insole integrated sensor is used to measure
the load.All the operations are continuously monitored
by the microcontroller.
Blood pressure measurement.
Body temperature measurement.
8/12/2019 1234 Rupesh
3/26
BLOODPRESSURE
SENSING UNIT
TEMPERATURESENSING UNIT
MICRO-CONTROLLER
BUZZER ALARM
DISPLAY
INSOLE LOADSENSING UNIT
DC POWERSUPPLY
BLOCK DIAGRAM
8/12/2019 1234 Rupesh
4/26
Principle of Load Measurement
Capacitance is given by
The capacitance will vary by the variation of spacebetween the conducting plate due to applied pressure.
The area of the plate and the dielectric constant of themedium will be constant.
The capacitance is converted into digitalized form by theIC AD7142 .
dAC
8/12/2019 1234 Rupesh
5/26
Load Sensor Design
Study of all project related papers to start the design.
Specifications :Local sole material.
Can sheet as conducting layer.
Conducting electrodes of different diameters.
Diameters are 20mm, 30mm and 40mm.
Instant adhesive is used.
Work Carried Out
8/12/2019 1234 Rupesh
6/26
Relative force distribution on the foot area.
8/12/2019 1234 Rupesh
7/26
SOLE LOOK
8/12/2019 1234 Rupesh
8/26
SOLE LOOK
8/12/2019 1234 Rupesh
9/26
Portable Digital LCR meter is suitable forhigher Capacitance.
Measurement was done by Conventional type
LCR meter.Sole Capacitance of the order of Pico farad.
Variation 9.6 pf to 5.5 nf.
Screw gauge used for thickness measurement.Sole thickness 8.792mm.
Conducting plate thickness 0.1475mm.
8/12/2019 1234 Rupesh
10/26
SCREW GAUGE
8/12/2019 1234 Rupesh
11/26
Sole is unable to regain its shape
completely.
Conducting plate thickness causing
flexibility problem.
Node formation on the plate duringsoldering.
8/12/2019 1234 Rupesh
12/26
8/12/2019 1234 Rupesh
13/26
EPDM Rubber suitable for sole material.
Good insulator.
Better shape regaining capability.
Available in different types of thickness.
Thin Aluminum foil is suitable for input layer.
Provides better flexibility.
Conducting glue is suitable instead of soldering wir
Future work :
8/12/2019 1234 Rupesh
14/26
Work carried out :
Study of CDC ic AD7142 .
Specifications :
14 Input channels .
High resolution.
On chip calibration.
Variation of load is converted into digital form.
8/12/2019 1234 Rupesh
15/26
Specifications :
8 bit Philips microcontroller of 8051 series
(P89v51RD2).
Crystal frequency is 11.0592 Mhz.
1024 bytes RAM and 64K bytes ROM.Three 16-bit timers.
8 interrupt sources.
Work Carried Out :
8/12/2019 1234 Rupesh
16/26
Program will be written in C-code andburned using software and burner kit.
Software used are
Keil uvision4
Flash magicSome demo programs are written and
tested.
8/12/2019 1234 Rupesh
17/26
It is a cross compiler which converts c-code to hex code.
8/12/2019 1234 Rupesh
18/26
This software is used to burn Philips ICs.
8/12/2019 1234 Rupesh
19/26
PROGRAMMAR KIT
8/12/2019 1234 Rupesh
20/26
Development of programs and testing .
Design of required circuit.
Substitute for AD7142 or getting the same.
Interfacing of AD7142 with controller.
8/12/2019 1234 Rupesh
21/26
Work carried out
Study of various papers related to measurement of
blood pressure and discussion with guide.Measurement by conventional methods
Systolic Method
Diastolic MethodCuff
8/12/2019 1234 Rupesh
22/26
Measurement by Scientific methods using
Blood sensor BP01Amplifier
ADC0804
Microcontroller
8/12/2019 1234 Rupesh
23/26
AMPLIFIER ADC
MICRO-CONTROLLER
DISPLAY
BLOODPRESSURESENSOR
DC POWERSUPPLY
BLOCK DIAGRAM OF BLOOD SENSINGUNIT
8/12/2019 1234 Rupesh
24/26
Blood Pressure Sensor
8/12/2019 1234 Rupesh
25/26
Design of blood pressure measurement circuit.
Interfacing of blood pressure sensor.
Design of body temperature measurement unit.
8/12/2019 1234 Rupesh
26/26