-12652

1265-1266_F51-002_cENG

-12662

1265-1266_F51-002_cENG cENG 2nd

Part Number

SUTPK10A

Part Number - Paint Color - L - (NS)

SGGP8ASUTD15A - BR

--

200500 - NS

Steel Pipe

Part Number MMaterial Standards Application SSurface TreatmentSGG# SGP JIS G3452 Pneumatic Pipes for Low Operating Pressure Steam/Water/Oil/Gas -SGP## SGPW JIS G3442 Pipes for draining water, air conditioning, etc. Zinc PlatingSUT## SUS304TP JIS G3459 Corrosion / Low Temperature / High

Temperature Resistant Pipes-

SUTS# SUS316TP JIS G3459 -STPG# STPG370(Sch40) JIS G3454 Pressure pipes to be used under

350C-

SGHP# STPG370(Sch80) JIS G3454 -

Alterations

No Sealing Tape

Code NS

Spec.Shipped without regular sealing tape on male threads.EApplicable to Shape P, A, D and F only.

No Sealing Tape

E�For wrench flats alteration (previous SC alteration), see P.1267.

* No surface treatment on male thread portion of SGP#.* Male threads are covered with sealing tape before shipping.* Excessive tightening may deform the female thread portion. Wrap

with sealing tape for air tightness, hand tighten first, and then final tighten by giving approx. one more rotation.

* Marks may be left on the surface when tightening screws.

25

L±1

D d dd

d

dd

d

L±1

D

L±1

L±1

L±1

D

DD

2-R (PT)

R (PT)

Rc (PT)

2-Rc (PT)

R (PT)

R (PT)

Rc (PT)

d25

25

252525

2525

2525

2525

2525

25L±1

D

L±1

D

L±1

D

2525

ShapeP

ShapeA

ShapeC

ShapeW

ShapeD

ShapeE

ShapeG

ShapeF

Part NumberPaint Color Selection L

1mm IncrementR (PT)RC (PT)

SGG# SGP# SUT#/SUTS# STPG# SGHP#Type Shape No. D d D d D d D d D d

SGGSGPSUTSUTSSTPGSGHP

PAWCDEFG

6ANot specified

(Unpainted)W (White)

BR (Brown)BL (Blue)

Y (Light Yellow)R (Dark Red)

B (Black)

30~2000 1/8 10.5 6.5 - - 10.5 5.7 10.5 7.1 10.5 5.78A 40~2000 1/4 13.8 9.2 13.8 9.2 13.8 7.8 13.8 9.4 13.8 7.8

10A 40 (43)~2000 3/8 17.3 12.7 17.3 12.7 17.3 10.9 17.3 12.7 17.3 10.915A 50 (55)~2000 1/2 21.7 16.1 21.7 16.1 21.7 16.1 21.7 16.1 21.7 14.320A 50 (65)~2000 3/4 27.2 21.6 27.2 21.6 27.2 21.4 27.2 21.4 27.2 19.425A 60 (75)~2000 1 34.0 27.6 34.0 27.6 34.0 27.2 34.0 27.2 34.0 25.032A 60 (80)~2000 11/4 42.7 35.7 42.7 35.7 42.7 35.5 42.7 35.5 42.7 32.940A 60 (90)~2000 11/2 48.6 41.6 48.6 41.6 48.6 41.2 48.6 41.2 48.6 38.450A 60 (150)~1500 2 60.5 52.9 60.5 52.9 60.5 52.7 - - - -

QL Configurable

EL Dimensions in ( ) are for Shape F and G. L Dimensions 1501 ~ 2000 are available for SGG#, SGP# and SUT# only (Except No.50A).EPainted pipes are available for No.6A ~ 25A (L dimension 1500 or less) of SGG#, SUT#, STPG# and SGHP#. EShape A, W and E are not available for No. 50A.

Part Number L SGPPK SUTPK SGPPK SUTPKUnit Price Volume Discount Rate Unit Price Volume Discount Rate

Type No. D d D d 1 ~ 9 pc(s).10 ~ 30 pcs. 1 ~ 9 pc(s).10 ~ 30 pcs.

SGPPK(SGPW)

SUTPK(SUS304TP)

6A

500

- - 10.5 5.7 - -8A 13.8 9.2 13.8 7.8

10A 17.3 12.7 17.3 10.915A 21.7 16.1 21.7 16.120A 27.2 21.6 27.2 21.425A 34.0 27.6 34.0 27.2

QL Fixed (Shape C, Unpainted only)

EFor orders larger than indicated quantity, please check with WOS.

[Reference] Pipe Identification (JIS Z9102)

Material Types Identification Color Munsell Value (Reference)

Air White N9.5

Oil Brown 7.5YR5/6

Water Blue 2.5PB5/8

Gas Light Yellow 2.5Y8/6

Steam Dark Red 7.5R3/6

(* Since the color swatches are in print, they may show some shade variations.)

QTypes of Paint Colors (Japan Paint Manufactures' Association 1997 U No.) : For Internal Fluid Identification•Thread portion is not painted. •Inner surface of pipes may not be painted.White

UN-95Approx. MunsellNo. N9.5

Brown

U17-50LApprox. MunsellNo. 7.5YR5/6

Blue

U72-50PApprox. MunsellNo. 2.5PB5/8

Light Yellow

U22-80LApprox. MunsellNo. 2.5Y8/6

Dark Red

U07-30LApprox. MunsellNo. 7.5R3/6

Black

UN-10Approx. MunsellNo. N1

Part Number Unit Price P•A•W•F Shape Unit Price C Shape Unit Price D•E•G Shape

Type No. Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500 L1501~2000 Min. L

~ 250 L251~500 L501~750 L751~1000 L1001~1500 L1501~2000 Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500 L1501~2000

SGG#

6A8A

10A15A20A25A32A40A50A - - -

SGP#

6A - - - - - - - - - - - - - - - - - -8A

10A15A20A25A32A40A50A - - -

SUT#

6A8A

10A15A20A25A32A40A50A - - -

SUTS#

6A - - -8A - - -

10A - - -15A - - -20A - - -25A - - -

STPG#

6A - - -8A - - -

10A - - -15A - - -20A - - -25A - - -32A - - -40A - - -

SGHP#

6A - - -8A - - -

10A - - -15A - - -20A - - -25A - - -32A - - -40A - - -

QUnit Price (without Painting)

Part Number - Paint Color - L

SUTP6A - R - 200

No.Unit Price

Min. L ~ 250 L251~500 L501~750 L751~1000L1001~1500

6A8A

10A15A20A25A

No.Unit Price

Min. L~ 250 L251~500 L501~750 L751~1000L1001~1500

6A8A

10A15A20A25A

•SGG#, STPG#, SGHP#

EFor price of the painted pipes, painting charge will be added to the unit price of unpainted pipe. EPainted Pipes are not available for L dimension 1501 ~ 2000.EVolume discount rate is applicable to painting charge.

QPainting Charge•SUT# (SUS304)

(Ex.) >> (Unit Price without Painting) + (Painting Charge) = (Unit Price with Painting)

-12672

1267-1268_F51-003_cENG

-12682

1267-1268_F51-003_cENG cENG 2nd

Steel PipeWrench Flats

Heat/Cold Retention Pipe Covers / L-Shaped Angles for Steel Pipes

Part Number - Paint Color - L - SC

SSGGP8ASSUTD15A - BR

--

200500

--

SC20SC50

D

L±1

dt

HKCVP

M Material: Heat Resistant Polyethylene FoamOperating Temperature Range: -20 ~ 120°C

Q Heat/Cold Retention Pipe Covers for Elbow / Tee

D

A

B

dt

D

A

B

dt

HKCVT(For Tee)

L

D

dt

L

D

dt

HKCVE(For Elbow)

Operating Temperature Range: -20 ~ 120°CM Material: Heat Resistant Polyethylene Foam

Q Heat/Cold Retention Pipe Covers for Pipes

Part Number - L

HKCVP6AHKCVE6A

- 100

Q Pipe Covering Tape

L

W±

1

T

HKTPE

Part Number

HKTPE25

M Material: PolypropyleneOperating Temperature Range: -20 ~ 80°C

Part Number L (m) T (mm) Unit Price Volume Discount RateType W (mm) 1 ~ 9 pc(s). 10 ~ 30 pcs.

HKTPE 25 55 0.12 50

E�For orders larger than indicated quantity, please check with WOS.

Part Number MMaterial Application SSurface Treatment

SSGG# SGP Pneumatic Pipes for Low Operating Pressure Steam/Water/Oil/Gas -SSGP# SGPW Pipes for draining water, air conditioning, etc. Zinc PlatingSSUT# SUS304TP

Corrosion / Low Temperature / High Temperature Resistant Pipes-

SSUTS# SUS316TP -

Q L-Shaped Angles for Steel Pipes

25

HT

BL

GW

R

FA

4-C2

GW

R4-C2

FF

A1A

PP2-D

HT

BL

2-D

HT

BL

GW

R

FA

4-C2

GW

R4-C2

FF

A1A

PP2-D

HT

BL

2-D

FA

GPW

R

TH

BL

4-C2

P2-D

Single Slot Double Slot Cantilever

EThe material of SGPLD is SPHC.

TypeMMaterial SSurface Treatment

Single Slot Double Slot CantileverSGPL SGPLD SGPLK SPCCE Black OxideSGPLS SGPLDS SGPLKS SUS304D -

SGPLPipe Manifold (SGM)

U-Bolt (UB)(P.1270)

(P.1259)

Part Number

SGPL4

Part Number TH L W

DP B A F

GR

Unit Price

Type U-Bolt Thread Size M SGPL SGPLS Hole Dia. Applicable

ScrewSlotted

HoleApplicable

Screw SGPL SGPLS

Single Slot SGPLSGPLS

43.2 3

80 30 30 5.5 M5 20 20 45 55 4.5 M4 2.255 100 40 40 25 30 55 70 5.5 M5 2.756 6.5 M6 6.5 M6 3.25

Part Number TH L W

DP B A A1 F

GR

Unit Price

Type U-Bolt Thread Size M SGPLD SGPLDS Hole Dia. Applicable

ScrewSlotted

HoleApplicable

Screw SGPLD SGPLDS

Double Slot SGPLDSGPLDS

44.5 4

160 50 40 6.5 M6 2535 45 75 60 4.5 M4 2.25

5 200 70 40 45 57.5 90 75 5.5 M5 2.756 8.5 M8 6.5 M6 3.25

EP.237Use with flat washers (PWF, SPWF) is recommended. EFor detailed U bolt dimensions, see P.1270.

Part Number TH L W

DB A F

GR P

Unit Price

Type U-Bolt Thread Size M SGPLK SGPLKS Hole Dia. Applicable

ScrewSlotted

HoleApplicable

Screw SGPLK SGPLKS

CantileverSGPLKSGPLKS

43.2 3

80 30 808.5 M8

20 45 55 4.5 M4 2.25 40

5 100 40 90 30 55 70 5.5 M5 2.75 50

* No surface treatment on male thread portion of SSGP#.* Male threads are covered with sealing tape before shipping.* Excessive tightening may deform the female thread portion. Wrap

with sealing tape for air tightness, hand tighten first, and then final tighten by giving approx. one more rotation.

* There may be some scratches remaining from threading operation.

Part Number Paint Color Selection

L1mm Increment

SC: 1mm Increment W l1

R (PT)RC (PT) T1 T2

SSGG# SSGP# SSUT#/SSUTS#Type Shape No. D d D d D d

SSGGSSGPSSUTSSUTS

PAWCDEFG

6A Not specified (Unpainted)W (White)

BR (Brown)BL (Blue)

Y (Light Yellow)R (Dark Red)

B (Black)

30~1500 5~100

ESpecifiable range is limited

depending on the shape. Refer to the formula below each

drawing.

8 8 1/8 10 15 10.5 6.5 - - 10.5 5.7 8A 40~1500 12 10 1/4 15 20 13.8 9.2 13.8 9.2 13.8 7.8 10A 40 (43)~1500 16 10 3/8 17 16 17.3 12.7 17.3 12.7 17.3 10.9 15A 50 (55)~1500 19 10 1/2 20 18 21.7 16.1 21.7 16.1 21.7 16.1 20A 50 (65)~1500 24 15 3/4 23 20 27.2 21.6 27.2 21.6 27.2 21.4 25A 60 (75)~1500 30 15 1 25 22 34.0 27.6 34.0 27.6 34.0 27.2

EL Dimensions in ( ) are for Shape F and G. ESpecifiable L dimension and SC dimension are limited depending on the shape. Refer to the formula below each drawing.EPainted pipes are available for No.6A ~ 25A of SSGG# and SSUT#.

L±1 SC

D dd

d

L±1

D

L±1

L±1

L±1

DD

2-R (PT)

R (PT)

R (PT)

T T1

T2

W

T2

Rc (PT)

d2-Rc (PT)

Rc (PT)

25

25

25 25

25

25

25

dd

dd

2525

25

2525

2525

DD

DD

2525

2525L±1 L±1

L±1

25

SC

T1

T1

R (PT)T1

SC

T

T

SC

SC

SC

SC

SC

1

2

2

T1+5≤SC≤L-T1-5-l1 T1+5≤SC≤L-5-l1

T2+5≤SC≤L-5-l1

T1+5≤SC≤L-D-l1-5

5≤SC≤L-D-l1-5

T1+5≤SC≤L-T2-5-l1

T2+5≤SC≤L-T2-5-l1

5≤SC≤L-5-l1

l1

l1

l1

l1 l1

l1

l1

l1

ShapeP

ShapeA

ShapeC

ShapeW

ShapeD

ShapeE

ShapeG

ShapeF

EWrench flats are not surface treated or colored. ET1=External Threads, T2=Internal Threads

Part Number Unit Price Shape P, A, W and F Unit Price C Shape Unit Price Shape D, E and G

Type No. Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500 Min. L

~ 250 L251~500 L501~750 L751~1000 L1001~1500 Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500

SSGG#

6A8A10A15A20A25A

SSGP#

6A - - - - - - - - - - - - - - -8A10A15A20A25A

SSUT#

6A8A10A15A20A25A

SSUTS#

6A8A10A15A20A25A

QUnit Price (without Painting)

No.Unit Price

Min. L ~ 250 L251~500L501~750 L751~1000 L1001~1500

6A8A

10A15A20A25A

No.Unit Price

Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500

6A8A

10A15A20A25A

QAdditional Painting Charge (added to the price on the left side table)•SSGG#

•SSUT# (SUS304)

(Ex.) Part Number - Paint Color - L

SSUTP6A - R - 200>>

(Unit Price without Painting) + (Painting Charge) = (Unit Price with Painting)

EFor detailed paint colors, see P.1265.

Part Number L 1mm

IncrementD d t

Unit Price

Type No. L30~250 L251~500 L501~750 L751~1000 L1001~1500

HKCVP

6A

30~1500

26 10 8 8A 29 13 8 10A 38 18 10 15A 42 22 10 20A 48 28 10 25A 55 35 10 32A 63 43 1040A 69 49 1050A 81 61 10

Part Number D d t L A B Unit PriceType No. HKCVE HKCVT

HKCVEHKCVT

6A 32 16 8 24 32 64 8A 36 20 8 26 34 68

10A 44 24 10 32 40 80 15A 48 28 10 34 42 84 20A 54 34 10 36 44 88 25A 63 43 10 40 50 100

EA dimension and B dimension are applicable only for HKCVT.

-12872

1287-1288_F51-013_cENG

-12882

1287-1288_F51-013_cENG cENG 2nd

PVC Pipes / PVC FittingsTS Fittings / HI Fittings

Q PVC Pipe Type MMaterial Standards ColorPVCT PVC

JIS K 6742Gray

PVCH Impact Resistance PVC Blue Gray

Part Number L1mm

Increment

O.D. Thickness I.D. (Reference

Value)

Unit Price

Type No. D D Tolerance t t

TolerancePVCT

L50~200 201~400 401~600 601~800 801~1000 1001~1250 1251~1500

PVCTPVCH

13

50~1500

18 ±0.2 2.5 ±0.2 1316 22 ±0.2 3 ±0.3 1620 26 ±0.2 3 ±0.3 2025 32 ±0.2 3.5 ±0.3 2530 38 ±0.3 3.5 ±0.3 31

EThe tolerance of L dimension will be +1 ~ 3 for 50 ~ 1000, +2 ~ 5 for 1001 ~ 1500. * The price of PVCH is the price in the table above plus JPY100.

6.3

L

t

D

( )

ENote that pipe O.D. may have some scratches or small flaws on its surface.

QSockets

LZ

Q Sockets for Valve Sockets

L

R (PT)

B

d

Q Reducing Sockets

L

Z

Q Reducing Tees

M Material: PVC

I

H H

Z2

Z1

TS FittingsPVCTTD

Q45° Elbows

Z

Z

H

HHI FittingsPVCHHE

M Material: Impact Resistance PVC

M Material: PVC

Q Elastic Fittings TS FittingsPVCTY B

W

L

t

D

Q Valves

M Material: PVC

TS FittingsPVCTB

dsD

H

L1

L

Part NumberPVCHSB20

PVCHBN100

Q AdhesivePVCHBN(For Impact Resistance PVC)

PVCTBN( For PVC)

EFor dimension of the junction on fittings, see Dimension Table in Overview on P.1286. EFor specifications / application of each material, see Overview in P.1286.

Type Types M MaterialPVCTS TS Fittings PVCPVCHS HI Fittings Impact Resistance PVC

Type Types M MaterialPVCTSB TS Fittings PVCPVCHSB HI Fittings Impact Resistance PVC

Type Types M MaterialPVCTSD TS Fittings PVCPVCHSD HI Fittings Impact Resistance PVC

QCaps

L

Type Types M MaterialPVCTC TS Fittings PVCPVCHC HI Fittings Impact Resistance PVC

QTees

I

H H

Z2

Z1

Type Types M MaterialPVCTT TS Fittings PVCPVCHT HI Fittings Impact Resistance PVC

Q 90° Elbows

H

H

Z

Z

Type Types M MaterialPVCTE TS Fittings PVCPVCHE HI Fittings Impact Resistance PVC

Part Number - L

PVCT20 - 1000

Part Number Z L StandardsUnit Price

PVCTS PVCHSType No. 1 ~ 50 pcs. 20 ~ 50 pcs.

PVCTSPVCHS

13 5 57

JIS K 674316 7 6720 7 7725 7 8730 7 95

EFor orders larger than indicated quantity, please check with WOS.

Part Number R(PT) d B L StandardsUnit Price

PVCTSB PVCHSBType No. 1 ~ 50 pcs. 20 ~ 50 pcs.

PVCTSBPVCHSB

13 1/2 13 24 50

JIS K 674316 1/2 13 29 5720 3/4 18 33 6425 1 23 40 7130 1 1/4 31 46 80

EFor orders larger than indicated quantity, please check with WOS.

Part Number Z L StandardsUnit Price

PVCTSD PVCHSDType No. 1 ~ 50 pcs. 20 ~ 50 pcs.

PVCTSDPVCHSD

1613 5 61

JIS K 67432016 6 712516 15 852520 9 843025 9 93

EFor orders larger than indicated quantity, please check with WOS.

Part Number Z1 Z2 H I StandardsUnit Price

PVCTT PVCHTType No. 1 ~ 50 pcs. 20 ~ 50 pcs.

PVCTTPVCHT

13 10 10 36 36

JIS K 674316 13 13 43 4320 15 15 50 5025 18 18 58 5830 21 21 65 65

EFor orders larger than indicated quantity, please check with WOS.

Part Number L StandardsUnit Price

PVCTC PVCHCType No. 1 ~ 50 pcs. 20 ~ 50 pcs.

PVCTCPVCHC

13 29

JIS K 674316 33.520 38.525 4430 48

EFor orders larger than indicated quantity, please check with WOS.

Part Number Z1 Z2 H I Standards Unit Price

Type No. 1 ~ 50 pcs.

PVCTTD

1613 11 12 41 38

JIS K 67432016 13 15 48 452516 13 18 53 482520 15 18 55 533025 18 21 62 61

EFor orders larger than indicated quantity, please check with WOS.

Part Number Z H Standards

Unit PricePVCTE PVCHE

Type No. 1 ~ 50 pcs. 20 ~ 50 pcs.

PVCTEPVCHE

13 10 36

JIS K 674316 13 4320 15 5025 18 5830 21 65

EFor orders larger than indicated quantity, please check with WOS.

Part Number Z H Standards Unit Price

Type No. 1 ~ 50 pcs.

PVCHHE13 7 33

JIS K 674320 9 4425 11 51

EFor orders larger than indicated quantity, please check with WOS.

Part Number D t L B W Standards Unit PriceType No. 1~10 pcs.

PVCTY

13 26 3 68 25 38 JIS K 674316 34 5.5 110 29 42 -20 35 3.5 78 29 50

JIS K 674325 43 4 89 29 5630 48 4 98 33.5 63

EFor PVCTY16, the nut is round-shaped.EFittings for absorbing expansion / contraction of PVC Pipe due to heat

EFor orders larger than indicated quantity, please check with WOS.

Part Number D ds H L L1 Standards Unit Price Volume Discount RateType No. 1 ~ 9 pc(s). 10 ~ 30 pcs.

PVCTB

16 50 22 78 109 77

JIS K 674320 59 26 89.5 125 9725 68 32 101142 9730 80 38 119158129

EFor orders larger than indicated quantity, please check with WOS.

Part Number Weight by Volume (g) Unit PriceType No. 1~20 pcs.

PVCTBN 100 100500 500

Part Number Weight by Volume (g) Unit PriceType No. 1~20 pcs.

PVCHBN 100 100500 500

EFor orders larger than indicated quantity, please check with WOS.

-12932

1293-1294_F51-017_cENG

-12942

1293-1294_F51-017_cENG cENG 2nd

Copper Pipes / Copper Pipe Fittings

Q Copper Pipes

Q Copper Pipe FittingsMale Threaded Connector

Q Copper Pipe FittingsMale Threaded Elbow Connector

M Material: Brass M Material: Brass

Part Number - T

DKPT8 - 2

Part Number - L

DKE10 - 300

25

L25 25D

t

2-C

25

L25 25D

t

2-C

Copper Pipe Fittings

Q Copper Pipe Fittings Union

M Material: Brass

Q Copper Pipe FittingsUnion Elbow Connectors

M Material: Brass

Q Copper Pipe Fittings Union Tees

M Material: Brass M Material: Brass

Q Copper Pipe FittingsMale Threaded Tee

Q Copper Pipe FittingsGland Ring

M Material: Brass

Q Pin-Ring Joints

M Material: Brass

Part Number - T

DKUS3DKUPT8 - 2

Type M Material Standards

DKE Copper Phosphate (C1220) JIS H :3300

Part Number TR (PT) Selection TR (PT) Approx.

L L1 L2 T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKPT

3 1 1/8 28 5 9 1/8 12 122 1/4 32 6 12 1/8 14 12

4 1 1/8 28 5 9 1/8 12 122 1/4 32 6 12 1/8 14 12

5 1 1/8 28 5 9 1/8 12 122 1/4 32 6 12 1/8 14 12

61 1/8 33 6 9 1/4 14 162 1/4 36 6 12 1/4 16 163 3/8 39 8 13 1/4 19 16

81 1/8 33 6 9 1/4 14 162 1/4 36 6 12 1/4 16 163 3/8 39 8 13 1/4 19 16

102 1/4 40 8 12 3/8 19 193 3/8 41 8 13 3/8 19 194 1/2 46 10 16 3/8 22 19

122 1/4 46 10 12 1/2 22 243 3/8 47 10 13 1/2 22 244 1/2 50 10 16 1/2 24 24

14 3 3/8 48 10 13 1/2 22 244 1/2 51 10 16 1/2 24 24

15 3 3/8 50 10 13 5/8 24 274 1/2 54 11 16 5/8 27 27

16 3 3/8 50 10 13 5/8 24 274 1/2 54 11 16 5/8 27 27

Part Number TR (PT) Selection TR(PT) L1

Approx. L2 T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKLPT

3 1 1/8 20 25 1/8 12 122 1/4 25 27 1/8 16 12

4 1 1/8 20 25 1/8 12 122 1/4 25 27 1/8 16 12

5 1 1/8 20 25 1/8 12 122 1/4 25 27 1/8 16 12

61 1/8 22 31 1/4 16 162 1/4 25 31 1/4 16 163 3/8 28 33 1/4 19 16

81 1/8 22 31 1/4 16 162 1/4 25 31 1/4 16 163 3/8 28 33 1/4 19 16

102 1/4 27 35 3/8 19 193 3/8 28 35 3/8 19 194 1/2 34 38 3/8 24 19

122 1/4 30 42 1/2 24 243 3/8 31 42 1/2 24 244 1/2 34 42 1/2 24 24

14 3 3/8 31 43 1/2 24 244 1/2 34 43 1/2 24 24

15 3 3/8 31 45 5/8 24 274 1/2 34 45 5/8 24 27

16 3 3/8 31 45 5/8 24 274 1/2 34 45 5/8 24 27

Part Number L1mm

Incrementt

Unit Price

Type D L10~100

L101~200

L201~400

L401~600

L601~800

L801~1000

DKE

3 10~250

1

-

- -4

10~5005

6

8

10~90010

12

141.5

1510~100016

218

Part Number (L) L1 (L2) T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKUS

3 33 5 14.0 1/8 12 124 33 5 14.0 1/8 12 125 33 5 14.0 1/8 12 126 41 6 17.5 1/4 16 168 41 6 17.5 1/4 16 1610 48 8 20.0 3/8 19 1912 58 10 24.0 1/2 24 2414 60 10 25.0 1/2 24 2415 65 11 27.0 5/8 27 2716 65 11 27.0 5/8 27 27

Part Number (L) T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKUE

3 25 1/8 12 124 25 1/8 12 125 25 1/8 12 126 31 1/4 16 168 31 1/4 16 16

10 35 3/8 19 1912 42 1/2 24 2414 43 1/2 24 2415 45 5/8 24 2716 45 5/8 24 27

Part Number (L) (L1) T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKUT

3 50 25 1/8 12 124 50 25 1/8 12 125 50 25 1/8 12 126 62 31 1/4 16 168 62 31 1/4 16 16

10 70 35 3/8 19 1912 84 42 1/2 24 24

or more or less D L3 6 ± 0.1 ± 0.17 30 ± 0.2 ± 0.231 120 ± 0.3 ± 0.3121 400 ± 0.5 ± 0.5401 1000 ± 0.8 ± 0.8

Q Tolerance for D dimension and L dimension

or more or less CD3 D12 (12.7) 0.3D14 D18 0.5

Q C Dimension

Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 150˚C (No Freezing)

Fitting Specifications Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 150˚C (No Freezing)

Fitting Specifications

LL2 L1

D

T T1DKPT

L2

L1

D

T1

T

DKLPT

Main Body Ring RingNut

Copper Pipe

Pipeor Tube

Pin-RingJoint

RingNut

RingMain Body

Pin-Ring Joint is available when thin metal pipes and hard tubes are used with Copper Pipe Fittings.DP.1294 Set a ring nut and a ring in a joint pipe, insert the pipe into the main body all the way until the pipe end touches the pipe stopper

and tighten the nut by hand. Afterwards use a wrench or a spanner for further tightening. As annealed copper pipes are soft, use Annealed Copper Pipe Fittings, instead of this Ring Type coupling.DP.1296

Part Numberd2 D L L1 L2

Unit Price Volume Discount Rate

Type d1 1 ~ 4 pc(s). 5~20 pcs.

DKPRJ

4 3.0 6.0 15.0 14.0 1.0

6 4.5 8.0 16.0 15.0 1.0 8 6.0 10.0 19.0 17.5 1.5 10 8.0 12.0 22.0 20.0 2.0

EFor orders larger than indicated quantity, please check with WOS.

Part Number D1 L Unit Price Volume Discount RateType Applicable Pipe O.D. D 1 ~ 9 pc(s). 10~20 pcs.

DKRG

3 5 54 6 55 7 5.56 8.5 78 10.5 7.510 12.5 8.512 15 1014 17 1115 18 11.516 19 12

EFor orders larger than indicated quantity, please check with WOS.

d1

d2

L

L1 L2

D

DKPRJ

L

D1D

DKRG

Part Number TR (PT) Selection TR (PT) (L) (L1) L2 T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKUPT

4 1 1/8 50 25 20 1/8 12 122 1/4 54 27 25 1/8 16 12

5 1 1/8 50 25 20 1/8 12 122 1/4 54 27 25 1/8 16 12

61 1/8 62 31 22 1/4 16 162 1/4 62 31 25 1/4 16 163 3/8 66 33 28 1/4 19 16

81 1/8 62 31 22 1/4 16 162 1/4 62 31 25 1/4 16 163 3/8 66 33 28 1/4 19 16

102 1/4 70 35 27 3/8 19 193 3/8 70 35 28 3/8 19 194 1/2 76 38 34 3/8 24 19

12 3 3/8 84 42 31 1/2 24 244 1/2 84 42 34 1/2 24 24

E The PT thread size marked on the copper pipe fi tting body might be different from actual size.

D

T1

T1T1

D

D

(L1) (L1)

(L1)

(L)

DKUT

(L1)

L2

(L1)

(L)

D

D

T

T1T1

DKUPT

T1 T1

DD

(L2)(L2) L1

(L)

DKUS D

T1

(L)

(L) T1

D

DKUE

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.

-12952 -12962

Annealed Copper Pipes / Annealed Copper Pipe Fittings

Part Number - L

DKEN8 - 300

Part Number - T

DKNT8DKFGF6

- 2

DKFGF

M Material: Brass

Q Annealed Copper Pipe Fittings - Female Threaded Connector (G Thread Type)

Main Body Flare Nut

DK__ DKENF

Align the coupling body to the copper pipe, end to end, hand tighten the fl are nut, then tighten it securely with using a wrench and an adjustable spanner.

1295-1296_F51-018_cENG1295-1296_F51-018_cENG cENG 2nd

M Material: Copper Phosphate (C1220)

QAnnealed Copper Pipes

DKNT

M Material: Brass

Q Annealed Copper Pipe Fittings - Straight

DKNTL

M Material: Brass

Q Annealed Copper Pipe Fittings - Elbow

Copper Pipe Fittings / Needle Valves for Copper Pipes

Q Copper Pipe Fittings Female Threaded Connector

Q Copper Pipe Fittings Male Threaded Connector (G Thread Type)

Part Number

DKFR3DKVBN8

Part Number TR (PT) (L) L1

T1G (PF)

Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKFR

3 1/8 26 12 1/8 14 124 1/8 26 12 1/8 14 125 1/8 26 12 1/8 14 126 1/4 33 15 1/4 17 168 1/4 33 15 1/4 17 1610 3/8 39 19 3/8 22 1912 1/2 46 22 1/2 27 24

Part Number TG (PF)

A (L) (L1)Square

Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKVBN

6 1/4 35 60 42 12 16

8 1/4 35 60 49 14 16

10 3/8 45 70 58 17 19

12 1/2 55 84 78 23 24

Part Number TG (PF) (L) L1 L2

T1G (PF)

Square Unit PriceType Applicable Pipe O.D. D Main Body Nut

DKPG

3 1/8 25.5 5 6.5 1/8 12 124 1/8 25.5 5 6.5 1/8 12 125 1/8 25.5 5 6.5 1/8 12 126 1/4 32.5 6 8.5 1/4 16 168 1/4 32.5 6 8.5 1/4 16 16

10 3/8 38.0 8 10.0 3/8 19 1912 1/2 46.0 10 12.0 1/2 24 24

QParts and Materials for DKVBN No. Part Name Material

1 Wheel Tightening Nut Free-Cutting Brass

2 Washer JIS G3506 SWRH82A

3 Rotation Indicator JIS H4000 A1070P

4 Handle Aluminum Die Casting

5 Stem Free-Cutting Brass

6 Gland Nut Free-Cutting Brass

7 O-Ring NBR

8 Ring Free-Cutting Brass

9 Ring Nut Free-Cutting Brass

0 Main Body Brass for casting

1

2

3

4

5

6

7

8

9

0

T

(L)

D

T1

L1

DKFR

Q Needle Valves for Copper Pipes

T

TT

D

D

(L1)

(L)

ADKVBN

(L)

L2 L1

D

T T1DKPG

M Material: Brass M Material: Brass

Q Copper Pipe FittingsRing Nut

Q Copper Pipe FittingsLock NutDKRGN

(L)

T1

D

B Wrench Flats

M Material: Brass M Material: Brass

DKRKN

(T)

T1

B Wrench Flats

Part Number T1 (L) B Wrench Flats Unit PriceType Applicable Pipe O.D. D G(PF)

DKRGN

6 1/4 13 168 1/4 14 16

10 3/8 16 1912 1/2 19.5 2415 5/8 21 27

Part Number T1 (T) B Wrench Flats Unit PriceType No. G(PF)

DKRKN

1 1/8 4 122 1/4 5 163 3/8 6 194 1/2 7 24

Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 100˚C (No Freezing)

Fitting Specifications

D

L1L2

(L)

T T1

D

L2

L1

T

T1

D

(L1)(L)

T T1

DK## DKENF

L25 25D

t

2-C0.3

+3 0

45°

Dt

DKENDKENF (End Flare Type)

EDKENF End Flare Type is fl ared only at one end.

<End Flare Type>

25

QD Dimension Tolerance

D Tolerance3~6 ±0.18, 10 ±0.2

EDKEN is shipped unrolled and may arrive a little distorted.EWhen DKEN and Annealed Copper Pipe Fittings are combined, expand the pipe end to 45° using the fl are ring tool.

Part Number LSelection t

DKEN Unit Price DKENF Unit PriceType D L100 L200 L300 L500 L100 L200 L300 L500

DKENDKENF

3 100 200 300

1

- - - - -

4

100 200 300 5005

6

810

Part Number R (PT)T Selection

TR (PT) (L) L1 L2

T1 (UNF)Unify Fine Thread

SquareUnit Price

Type D Main Body Nut

DKNT

6

1 1/8 34 6 9

7/16-20UNF

16 17

2 1/4 37 6 12 16 17

3 3/8 40 8 13 19 17

8

1 1/8 35 6 9

1/2-20UNF

16 19

2 1/4 38 6 12 16 19

3 3/8 41 8 13 19 19

102 1/4 43 8 12

5/8-18UNF

19 22

3 3/8 44 8 13 19 22

4 1/2 49 10 16 22 22

Part Number R (PT)T Selection

TR (PT) L1

Approx. L2

T1 (UNF) Unify Fine Thread

SquareUnit Price

Type D Main Body Nut

DKNTL

6

1 1/8 22 32

7/16-20UNF

16 17

2 1/4 25 32 16 17

3 3/8 28 34 19 17

8

1 1/8 22 33

1/2-20UNF

16 19

2 1/4 25 33 16 19

3 3/8 28 35 19 19

102 1/4 27 38

5/8-18UNF

19 22

3 3/8 28 38 19 22

4 1/2 34 41 24 22

Part Number TG (PF) (L) (L1) T1 (UNF)

Unify Fine ThreadSquare

Unit PriceType D Main Body Nut

DKFGF6 1/4 34 15 7/16-20UNF 17 17

8 1/4 35 15 1/2-20UNF 17 19

10 3/8 42 19 5/8-18UNF 22 22

QFeatures: Suitable for plumbing that requires air tightness such as refrigerant gas pipe.

Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 150˚C (No Freezing)

Fitting Specifications

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.

-12972 -12982

1297-1298_F51-019_cENG1297-1298_F51-019_cENG cENG 2nd

Q�Stainless Steel Pipes

Q Stainless Steel Pipe Fittings Connectors

M Material: SUS316

Q�Stainless Steel Pipe Fittings Elbow

M Material: SUS316

Part Number - L

SKE10 - 300

Stainless Steel Pipes / Stainless Steel Pipe Fittings

Part Number - T

SKTGK6SKTGLK9.53

--

34

Type M Material Standards Annealing Gloss

SKHRSUS304

JIS G3459

Atmospheric Annealing Not provided

SKH Bright Annealing (BA Pipe) Provided

SKERSUS316

Atmospheric Annealing Not provided

SKE Bright Annealing (BA Pipe) Provided

Part NumberL 1mm

Increment

Unit Price

Type DSKHR SKH SKER SKE

L20~100 L101~200 L201~300 L301~400 L401~500 L20~100 L101~200 L201~300 L301~400 L401~500 L20~100 L101~200 L201~300 L301~400 L401~500 L20~100 L101~200 L201~300 L301~400 L401~500

SKHR SKH SKER SKE

4

20~500

66.35 (1/4 inch)

89.53 (3/8 inch)

1012

12.7 (1/2 inch)16

Stainless Steel Pipe Fittings

Q�Stainless Steel Pipe Fittings Union

Q Stainless Steel Pipe Fittings Union Elbow Connectors

M Material: SUS316 M Material: SUS316

QFor tightening procedure and structure of fittings, and applicable pipe specification, refer to P.1300.

L

h

F

H

L

L

E

D

D

SKUEK

H

LF

E DD

Lh

SKUSK

Q Stainless Steel Pipe Fittings Union Tees

M Material: SUS316

Q�Stainless Steel Pipe Fittings Reducing Union

M Material: SUS316

L

F1 F

E

HH1

D1

D

Lh

SKUSDK

LL

F

H

E D

L

L

L

Lh

SKUTK

Q Stainless Steel Pipe Fittings Port Connector

M Material: SUS316

Q� Stainless Steel Pipe Fittings Tube Insert

M Material: SUS316

L

D Ad

SKITK

L

L1

E D

SKPCK

E Insert SKITK into tubes for piping Fluororesin Tubes with Stainless Steel Pipe Fittings.

Part NumberD A d L

Unit Price Volume Discount Rate

Type Tube O.D. (mm) 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKITK

4 4 2 1.0 186 5.6 4 3.0 188 7 6 4.8 1910 9 8 6.5 2012 11 10 8 25

Part Number - D1

SKUSK6SKUSDK12.7 - 6.35

EValues in ( ) for D dimension are by inch.

Part NumberL E l1

Unit Price Volume Discount Rate

Type D 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKPCK

3.18 (1/8) 23 1.8 164 26 2.5 196 27 4 20

6.35 (1/4) 27 4.8 208 28 6.4 21

9.53 (3/8) 29 7.6 2210 29 8 2212 37 9.5 26.7

12.7 (1/2) 37 9.9 26.7

L

1.6

1.6 Dt

2-C

±1

( )

D t4 16 1

6.35 (1/4 inch) 18 1 (1.2)

9.53 (3/8 inch) 110 1 (1.5)12 1 (1.5)

12.7 (1/2 inch) 116 1

E Values in ( ) are for t dimension of SKE.

E For tightening procedure and structure of fittings, and applicable pipe specification, refer to P.1300.

H

E

FLT

D

L

h

SKTGK Lh

F

T L

HL1

E D

E1

SKTGLK

Part Number R (PT) T Selection

TR(PT) L L1 E E1 F l

Square Unit Price Volume Discount Rate

Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKTGLK

3.18(1/8)

1 1/8 24.9 22 2.5 5 13.4 18 12 122 1/4 25.9 24 2.5 5 13.4 19 14 12

41 1/8 27.8 22 3.5 5 15.3 20.5 14 142 1/4 27.8 24 3.5 5 15.3 20.5 14 14

6

1 1/8 27.9 22 5 5 15.4 20.5 14 142 1/4 27.9 24 5 5 15.4 20.5 14 143 3/8 28.9 27 5 5 15.4 21.5 17 144 1/2 30.9 35 5 5 15.4 23.5 22 14

6.35(1/4)

1 1/8 27.9 22 5 5 15.4 20.5 14 142 1/4 27.9 24 5 5 15.4 20.5 14 143 3/8 28.9 27 5 5 15.4 21.5 17 14

8

1 1/8 28.8 22 5 5 16.8 21 14 15.92 1/4 28.8 24 6 6 16.8 21 14 15.93 3/8 29.8 27 6 6 16.8 22 17 15.94 1/2 31.8 35 6 6 16.8 24 22 15.9

9.53(3/8)

2 1/4 30.8 27 7.5 7 17.8 23 17 193 3/8 30.8 27 7.5 8 17.8 23 17 194 1/2 32.8 35 7.5 8 17.8 25 22 19

102 1/4 30.8 27 7 7 17.8 23 17 193 3/8 30.8 27 8 8 17.8 23 17 194 1/2 32.8 35 8 8 17.8 25 22 19

122 1/4 35.8 28 7 7 22.8 25 22 233 3/8 35.8 30 9 9 22.8 25 22 234 1/2 35.8 35 10 10 22.8 25 22 23

12.7(1/2)

2 1/4 35.1 28 10 7 22.8 25 22 233 3/8 35.1 30 10 9 22.8 25 22 234 1/2 35.1 35 10 10 22.8 25 22 23

E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.

Part Number R (PT) T Selection

TR(PT) L E F l

Square Unit Price Volume Discount Rate

Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKTGK

3.18(1/8)

1 1/8 32.9 2.5 13.4 26 12 122 1/4 34.9 2.5 13.4 28 14 12

41 1/8 35.8 3.5 15.3 28.5 14 142 1/4 37.8 3.5 15.3 30.5 14 14

6

1 1/8 35.9 5 15.4 28.5 14 142 1/4 37.9 5 15.4 30.5 14 143 3/8 38.9 5 15.4 31.5 17 144 1/2 44.4 5 15.4 37 22 14

6.35(1/4)

1 1/8 35.9 5 15.4 28.5 14 142 1/4 37.9 5 15.4 30.5 14 143 3/8 38.9 5 15.4 31.5 17 14

8

1 1/8 36.8 5 16.8 29 14 15.92 1/4 38.8 6 16.8 31 14 15.93 3/8 39.8 6 16.8 32 17 15.94 1/2 45.3 6 16.8 37.5 22 15.9

9.53(3/8)

2 1/4 39.8 7 17.8 32 17 193 3/8 40.8 7.5 17.8 33 17 194 1/2 46.3 7.5 17.8 38.5 22 19

102 1/4 39.8 7 17.8 32 17 193 3/8 40.8 8 17.8 33 17 194 1/2 46.3 8 17.8 38.5 22 19

122 1/4 42.8 7 22.8 32 22 233 3/8 43.8 9 22.8 33 22 234 1/2 49.3 10 22.8 38.5 22 23

12.7(1/2)

2 1/4 42.8 7 22.8 32 22 233 3/8 43.8 9 22.8 33 22 234 1/2 49.3 10 22.8 38.5 22 23

E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.

Part NumberD1 L E F F1 l

Square Unit Price Volume Discount Rate

Type D Main Body h Nut H Nut H1 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKUSDK

6.35 (1/4) 3.18 (1/8) 40.8 2.5 15.4 13.4 26.5 14 14 126 4 42.7 3.5 15.4 15.3 28 14 14 14

84 43.6 3.5 16.8 15.3 28.5 14 15.87 146 43.7 5 16.8 15.4 28.5 14 15.87 14

9.53 (3/8) 6.35 (1/4) 44.7 5 17.8 15.4 29.5 17 19 14

106 44.7 5 17.8 15.4 29.5 17 19 148 45.6 6 17.8 16.8 30 17 19 15.87

126 47.7 5 22.8 15.4 29.5 22 23 14

10 49.6 8 22.8 17.8 31 22 23 1912.7 (1/2) 6.35 (1/4) 47.7 5 22.8 15.4 29.5 22 23 14

E L and F are dimensions for hand tightening.E Values in ( ) for D and D1 dimension are by inch.

Part NumberL E F l

Square Unit Price Volume Discount Rate

Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKUSK

3.18 (1/8) 37.8 2.5 13.4 24 12 124 42.6 3.5 15.3 28 14 146 42.8 5 15.4 28 14 14

6.35 (1/4) 42.8 5 15.4 28 14 148 44.6 6 16.8 29 14 15.87

9.53 (3/8) 46.6 8 17.8 31 17 1910 46.6 8 17.8 31 17 1912 52.6 10 22.8 31 22 23

12.7 (1/2) 52.6 10 22.8 31 22 23

E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.

Part NumberL E F l

Square Unit Price Volume Discount Rate

Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKUEK

3.18 (1/8) 24.9 2.5 13.4 18 12 124 27.8 3.5 15.3 20.5 14 146 27.9 5 15.4 20.5 14 14

6.35 (1/4) 27.9 5 15.4 20.5 14 148 28.8 6 16.8 21 14 15.87

9.53 (3/8) 30.8 8 17.8 23 17 1910 30.8 8 17.8 23 17 1912 34.8 10 22.8 24 22 23

12.7 (1/2) 34.8 10 22.8 24 22 23

E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.

Part NumberL E F l

Square Unit Price Volume Discount Rate

Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.

SKUTK

3.18 (1/8) 24.9 2.5 13.4 18 12 124 27.8 3.5 15.3 20.5 14 146 27.9 5 15.4 20.5 14 14

6.35 (1/4) 27.9 5 15.4 20.5 14 148 29.4 6 16.8 22 14 15.87

9.53 (3/8) 30.8 8 17.8 23 17 1910 30.8 8 17.8 23 17 1912 38.3 10 22.8 27.5 22 23

12.7 (1/2) 38.3 10 22.8 27.5 22 23

E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.

Part Number - L

OST8 - 250

Q Swaged Sleeve Fittings for Hydraulics Reducers

Q Swaged Sleeve Fittings for Hydraulics Reverse Flow Prevention Union

Type MMaterial SSurface Treatment

KTGREMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

Type MMaterial SSurface Treatment

KTGZRMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

Q Swaged Sleeve Fittings for Hydraulics Reverse Flow Prevention Connectors

Type MMaterial SSurface Treatment

KTGZCMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

Part Number

KTGS8-1KTGR6

Q Swaged Sleeve Fittings for Hydraulics Sleeve

Q Swaged Sleeve Fittings for Hydraulics Nut

Type MMaterial SSurface TreatmentKTGSL Carbon Steel Trivalent Chromate

Type MMaterial SSurface TreatmentKTGNT S25C Trivalent Chromate

1301-1302_F51-021_cENG1301-1302_F51-021_cENG cENG 2nd

Steel Pipes for Hydraulics / Swaged Sleeve Fittings for Hydraulics

QSteel Pipes for Hydraulics

L±125

D±

0.1

t

2-C0.2

25

25OST

M Material: OST-2 (STPS-2 (JIS B2351))

Q Swaged Sleeve Fittings for Hydraulics Connectors

Q Swaged Sleeve Fittings for Hydraulics Elbow Nipples

Type MMaterial SSurface Treatment

KTGSMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

FL

DE

HT G LH1

Type MMaterial SSurface Treatment

KTGEMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

Q Swaged Sleeve Fittings for Hydraulics Union

Q Swaged Sleeve Fittings for Hydraulics Elbow

Q Swaged Sleeve Fittings for Hydraulics Tee

Type MMaterial SSurface Treatment

KTGRMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

Type MMaterial SSurface Treatment

KTGLBMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

Type MMaterial SSurface Treatment

KTGTEMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -

LH H1

DE

L

F

DE

L

L

Lh

H

L

F

LHH1

DA1 E

L

F

F

L

D

LHH1

D

FL

LHH1G

T

L

A

H

TL

D

L

TH

FL

h

E D

GL1

E1

No.6-1, 8-1, 8A-3, 10A-4, 15A-6

L

Fl

E D

GL 1

h

HTE1

Others

No.6

DE

L

L H

L

F

h

No.8, 10

L

L

E D

h

H

lF

QFeatures: Fitting with a built-in reverse fl ow prevention structure.

Part Number Applicable Pipe O.D.

D

Rating Flowl/min

Cracking Pressure

MPa

TR(PT)

Position of Gauge

Dia. G

Hex SocketF l

Tightening by Hand

Approx. L

Unit Price Volume Discount Rate

Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGZC

10-0510 18

0.051/4 6.01 24 19 7 53 58.5

10-45 0.45

12-0512 18

0.053/8 6.35 24 22 7 55 60

12-45 0.45

Part NumberA l

Unit Price Volume Discount Rate

Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGSL

6 6 14

8 8 14

10 10 15

12 12 15

Part NumberD T H Hex

Socket LUnit Price Volume

Discount Rate

Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGNT

6 7.3 M12x1.5 14 15

8 9.3 M14x1.5 17 15

10 11.3 M16x1.5 19 16

12 13.3 M18x1.5 22 16

Part Number L 1mm Increment t

Unit Price 1 ~ 4 pc(s).Type D L20~250 L251~500 L501~750 L751~1000 L1001~1500

OST6

20~1500

1.08 1.0

10 1.2 12 1.5

[Disassembly / Retightening]• Can be disassembled just by loosening the nut. However, never tighten and loosen the nut while

pressurized as it is very dangerous.• 8 or more disassemblies and retightening are possible by

following the Full Tightening Procedure as shown in (2).

Fitting BodySleeve

Nut

Pipe

E Make sure that the tapered end of the sleeve is facing the fi tting body.

If inserted backwards, pipe will not be properly swaged and may pull-off.

Swaged Sleeve Fittings are composed of a main body, a sleeve and a nut.[Tightening Procedure]For utilizing performance of Swaged Sleeve Fittings for Steel Pipes, use of appropriate pipe and accurate tightening of fi tting are required. The following pre-tightening will make plumbing smooth and secure.(1) Pre-tightening1 Insert the pipe with nut and sleeve inserted as shown in right fi gure into the fi tting

body. Make sure that pipe end contacts abutment part. Inadequate swaging due to the inadequate tightening may cause the pipe to pull out.

2Tighten the nut by hand.3 Tighten the nut with a wrench while rotating the pipe to the end of its rotation. Put a

mark on this position of fi tting body and the nut.4 Further tighten the nut by a wrench with1-1/4 turn at this mark.5Loosen the nut once to see the state of the sleeve in order to confi rm the following. 1) There is some millimeter distance between pipe end and sleeve end. 2) No substantial movement of the sleeve toward the direction of pipe axis is allowable.

Moving toward circumferential direction is acceptable.(2) Full Tightening

Attach the pre-tightened pipe with fi tting body and tighten the nut by a wrench until you feel sudden resistance. Further tighten the nut by 1/4 turn, and tightening will be done.

Structure and Tightening Procedure of Swaged Sleeve Fittings

[Applicable Pipes](1) JIS G 3454 Carbon Steel Pipe for Pressure Service STPG370(2) JIS G 3455 Carbon Steel Pipe for High Pressure Service STP370(3) JIS G 3456 Carbon Steel Pipe for High Temperature Service STP370(4) JIS G 3459 Stainless Steel Pipe for Plumbing SUS304TP and SUS316TP(5) Japan Fluid Power Association Standard JOHS-102 Accurate Carbon Steel Pipes for Hydraulics OST

Applicable Pipe Dia. Max. Operating Pressure Operating Temperature Range

8mm 8

50MPa

-20°C~250°C

6A 10.5

10,12mm 10,12

8A 13.8

10A 17.340MPa

15A 21.7

Applicable Pipe Dia. Max. Operating Pressure Operating Temperature Range

10•12mm 10,12 3MPa -20°C~120°C

• Specifications (Other Than Above)

• Specifications (KTGZR / KTGZC)

E Use No.6A, 8A, 10A, 15A with the same No. of SUT#, STPG# (P.1265). Sleeves of No.6A, 8A, 10A, 15A is different from those for KTGSL (P.1302). No. 8, 10 and 12 have approx. 1.4mm protrusion for improving pressure resistance.

Part Number Applicable Pipe O.D. D

TR(PT) E Reference

Dia. GTightening by

Hand Approx. LHex Socket F l

Unit Price Volume Discount Rate

Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGS

6-1 6 1/8 4 3.97 34.5 14 14 7 286-2 6 1/4 4 6.01 37.5 17 14 7 338-1 8 1/8 4 3.97 35.5 17 17 7 298-2 8 1/4 6 6.01 37.5 17 17 7 3310-2 10 1/4 7 6.01 38.5 17 19 7 3310-3 10 3/8 8 6.35 39.0 19 19 7 3412-2 12 1/4 7 6.01 38.5 19 22 7 336A-2 10.5 1/4 7 6.01 34.5 17 19 7 338A-3 13.8 3/8 9 6.35 40 22 24 7.5 3710A-4 17.3 1/2 12 8.16 44.5 27 32 8 4115A-6 21.7 3/4 16 9.53 48 32 36 9 45

E Use No.8A, 10A, 15A with the same No. of SUT#, STPG# (P.1265). Sleeves of No.8A, 10A, 15A is different from those for KTGSL (P.1302). No. 8 has approx. 1.4mm protrusion for improving pressure resistance.

Part Number Applicable Pipe O.D. D

TR(PT) E E1

Reference Dia. G

Tightening by Hand Approx. L L1

Wrench Flats h

Hex Socket H F L

Unit Price Volume Discount Rate

Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGE

6-1 6 1/8 4 4 3.97 30.5 14 14 14 7 206-2 6 1/4 4 4.5 6.01 33.5 17 17 14 7 238-1 8 1/8 6 4 3.97 33.5 16 17 17 7 238-2 8 1/4 6 7 6.01 33.5 18 17 17 7 23

10-2 10 1/4 8 7 6.01 34.5 19 17 19 7 2310-3 10 3/8 8 9 6.35 35.5 19.5 19 19 7 2412-2 12 1/4 10 7 6.01 35.5 20.5 19 22 7 248A-3 13.8 3/8 11 9 6.35 40 22.5 22 24 7.5 2810A-4 17.3 1/2 14 12 8.16 44.5 30 27 32 8 3215A-6 21.7 3/4 18 16 9.53 46.5 32.5 32 36 9 34

Part Number Applicable Pipe O.D.

DE

Hex SocketF l

Tightening by Hand

Approx. L

Unit Price Volume Discount Rate

Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGR

6 6 4 14 14 7 30 51

8 8 6 17 17 7 31 52

10 10 8 17 19 7 31 54

12 12 10 19 22 7 31 54

Part Number Applicable Pipe O.D. D E Wrench

Flats hHex

Socket H F LTightening by Hand

Approx. L

Unit Price Volume Discount Rate

Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGLB6 6 4 14 14 7 20 30.58 8 6 17 17 7 23 33.5

10 10 8 17 19 7 23 34.5

Part Number Applicable Pipe O.D.

DE Wrench

Flats h

Hex Socket

HF l

Tightening by Hand

Approx. L

Unit Price Volume Discount Rate

Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGTE

6 6 4 14 14 7 20 30.5

8 8 6 17 17 7 23 33.5

10 10 8 17 19 7 23 34.5

12 12 10 19 22 7 24 35.5

Part Number Applicable Nominal Dia. of Fitting A1

Applicable Pipe O.D.

DE

Hex SocketF l

Tightening by Hand

Approx. L

Unit Price Volume Discount Rate

Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGRE

8-6 8 6 4 14 14 7 39 49.5

10-6 10 6 4 14 14 7 40 50.5

10-8 10 8 6 17 17 7 40 50.5

12-6 12 6 4 14 14 7 41 51.5

12-8 12 8 6 17 17 7 41 51.5

12-10 12 10 8 17 19 7 41 52.5

Part Number Applicable Pipe O.D.

D

Rating Flowl/min

Cracking Pressure

MPa

Hex SocketF l

Tightening by Hand

Approx. L

Unit Price Volume Discount Rate

Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.

KTGZR

10-0510 18

0.0524 19 7 49 72

10-45 0.45

12-0512 18

0.0524 22 7 51 74

12-45 0.45

QFeatures: Fitting with a built-in reverse fl ow prevention structure.

-13012 -13022