Date post: | 27-Dec-2015 |
Category: |
Documents |
Upload: | manu-gimenez |
View: | 340 times |
Download: | 3 times |
Dril
ling
1 HSS drilling
2 Solid carbide drilling
3 Indexable insert drilling
4 Reaming and Countersinking
Thre
adin
g
5 HSS taps and dies
6 Circular and Thread Milling
7 Thread turning
Turn
ing
8 Turning Tools
9 EcoCut + ProfileMaster
10 Grooving Tools
11 Miniature turning tools
Mill
ing
12 HSS Milling Cutters
13 Solid Carbide milling cutters 13
14 Milling tools with indexable inserts + mould and die production
Tool
Hol
ders
15 Rotating toolholders
16 Tool holders, static + driven tools
17 Vices
Mod
ular
To
olho
lder
s
18 Modular Spindle Tools
19 Article no. index
New products for machining technicians
13 Solid Carbide milling cutters
Page(s)
- HPC Solid Carbide Ball Nosed End Mills 68
- HPC / HSC solid carbide torus end mills 67
Latest geometry for application as a HSC tool with low depth of cut and high feed, or as an HPC tool with the highest feedrates
New Products
Diamond
Exchangeable heads with PCD inserts as: Page(s)
- Shoulder milling cutter 20-21
- Ball nose end milling cutters 22
- Torus end milling cutters 22
Specialist for the economic machining of titanium, titanium alloys and high temperature alloys Page(s)
49
50
13 / 2 toolingcenter.com
HPC cutters for high chip volume and highest tool life in steel, cast iron and hardened materials Page(s) 61-68
Table of contents
High-speed selection of your milling tool by material group Page(s) 5-12
A for the machining of all steels up to tool steel
H for the machining of hard materials to 70 HRC
S for the machining of heat resistant materials
N for the machining of non-ferrous materials
F for the machining of cast materials
R for the machining of rust and acid-proof steel
Technical Information
Cutting Data Page(s) 233-281
Collection of formulae Page(s) 305-308
Circular pocket milling Page(s) 305
Advantages with the use of the cool air nozzle Page(s) 304
Slot milling via Trochoidoidal procedures Page(s) 303
Approximate feed rates Page(s) 248-249
General references Page(s) 306-309
Tolerances for cutting diameters Page(s) 309
Material Examples Index Page(s) 233
Symbol explanation and coatings Page(s) 3
Description of tool type Page(s) 4
WNT-Tips Page(s) 13-14
WNT Mastertool Products Page(s) 128-231
WNT Mastertool***** Products Page(s) 15-127
MonsterMill ProductsHigh speed tools for HPC machining, co-ordinated with special materials
HPC mills for high performance aluminum machining Page(s) 77
HPC mills for high performance machining of rust and acid-proof steel as well as high-temperature resistant alloys such as titanium, Inconel, Hardox, Monel and Waspaloy
Page(s) 47+48
HPC mills for high performance dry machining Page(s) 79
Selection guide for cutters for plastic, fiberglass, carbon fibre Page(s) 221
Solid Carbide milling cutters
13
toolingcenter.com 13 / 3
Symbol explanation
High volume machining
High speed machining
High-feed milling
Hard materials
Machining example
The red arrows describe the possible feed directions
Number of teeth
K
45° K = Chamfer width (in mm)
Cutting geometry λs = helix angle γs = rake angle
Shank type
Length: extra short / short / medium / long / extra long
Central coolant
Radial coolant
Cool-jet recommended
Wet machining
Coatings
DIAMONDDiamond, Monolayer, HV0,05 = 10000 coefficient of friction (on steel) = 0,2 maximum application temperature: 700°
TiCNMultilayer, HV0,05 = 3000 coefficient of friction (on steel) = 0,4 maximum application temperature: 400°
Ti 10Ti Borit, Monolayer, HV0,05 = 4000 coefficient of friction (on steel) = 0,2 maximum application temperature: 700°
Ti 20CrN-Multilayer, HV0,05 = 2100 coefficient of friction (on steel) = 0,5
Ti 28Multilayer, HV0,05 = 2800 coefficient of friction (on steel) = 0,1 maximum application temperature: 500°
Ti 40Monolayer, HV0,05 = 4000 Maximum Application Temperature: 900°
Ti 400Multilayer, HV0,05 = 3500 coefficient of friction (on steel) = 0,6 maximum application temperature: 400°
Ti 1000Monolayer, HV0,05 = 3500 coefficient of friction (on steel) = 0,4 maximum application temperature: 800°
Ti 1001Monolayer, HV0,05 = 3500 coefficient of friction (on steel) = 0,3 maximum application temperature: 800°
Ti 1002Monolayer, HV0,05 = 3300 coefficient of friction (on steel) =0,4 maximum application temperature: 900°
Ti 1005Multilayer, HV0,05 = 2800 coefficient of friction (on steel) = 0,4 maximum application temperature: 600°
Ti 1010Multilayer, HV0,05 = 3600 coefficient of friction (on steel) = 0,2 maximum application temperature: 800°
Ti 1200 Maximum Application Temperature: 1100°-1200°
Ti 1500Nanolayer, HV0,05 = 3400 coefficient of friction (on steel) = 0,7 maximum application temperature: 900°
AlTiMultilayer maximum application temperature: 900°
Ti 2000Multilayer, HV0,05 = 3500 coefficient of friction (on steel) = 0,5 maximum application temperature: 900°
Ti 1050Multilayer, HV0,05 = 3300 Friction coefficient (against steel) = 0,3 - 0,5 maximum application temperature: 900°
Ti 1100Multilayer, HV0,05 = 3200 Friction coefficient (against steel) = 0,35 maximum application temperature: 1100°
blank Uncoated Tool
Solid Carbide milling cutters
13 / 4 toolingcenter.com
Description of tool type
Type Example illustration Application, characteristics
HPC cutters for high chip volume and highest tool life in steel, cast iron and hardened materials. Special cutting edge geometry ensure largest fz values and highest tool life is achieved.
High speed tool for high performance with excellent service life. The type ICR is specifically for the machining of rust and acid-proof steel, as well as heat resistant materials such as Inconel, Hardox and Hasteloy,it is however universally applicable!
High speed tool with ripper geometry for the high performance machining of aluminum materials. The type ACR MonsterMill has an irregular tooth pitch, polished surfaces and through coolant. Ideally suited to components for the aerospace industry.
High speed tool, developed primarily for dry maching of steel. By its special geometry the tool remains relatively cool despite high cutting speeds and tooth loads, which works against thermal shocks. The geometry makes for ideal employment on low power machines.
Specialist for the economic machining of titanium, titanium alloys and high temperature alloys.
Without chip breakers, for machining of materials with tensile strength to approx. 1000 N/mm2.
Universal roughing tool, suitable for slot and profile milling. Steel, softer stainless steel, casting, aluminum alloys and copper alloys can be machined with this geometry.
Tool with ripper profile on the major cutting edge for the production of small chips, which can be removed more easily from slots and pockets than conventional edges. Universal application in most materials.
For the machining of soft, tough and long chipping materials to 500 N/mm2.
For the machining of aluminium using low power machines. With ground chip breakers. Good surface quality is obtained.
Especially for the machining of aluminium and aluminium alloys. With a silicon content > 3% the coated variant is preferred.
For high performance machining of aluminum and copper with long service lives. Starting from a Silicon content of 3% & gt; we recommend using the Ti1005-coated type.
Without chip breakers for machining of high tensile and short cutting materials to 70 HRC. For hardness over 63 HRC we recommend the use of tools with the coating Ti2000.
Tool with finer ripper profile on the major cutting edge than type NR, thereby improving surface quality. This geometry is suitable for high tensile materials.
Solid Carbide milling cutters
toolingcenter.com 13 / 5
13
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s=Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
4-6SCR λ
s= 35-38° / γ
s= 7° ● ○ ● ○ ○ ○
HPC � 61-663-20 HA HB
3-5ICR λ
s= 38-40° / γ
s= 10° ○ ● ○ ○ ● ○
HPC � 47+481,5-20 HB
3ACR λ
s= 40° / γ
s= 9° ●
HPC � 776-25 HA
3-4MCR λ
s= 45° / γ
s= 15° ● ○ ● ○ ○ ○
HPC � 791-20 HB
Slot and end milling cutter
Rough milling cutters
2N λ
s= 30° / γ
s= 11° ● ● ● ● ● ●
� 150,2-2 HA
2N λ
s= 30° / γ
s= 6° ● ● ● ● ● ●
� 16-170,2-2 HA
2N λ
s= 30° / γ
s= 12° ● ● ● ● ● ●
� 180,5-2 HA
2H λ
s= 30° / γ
s= 6° ● ○ ● ○ ○ ○
HSC � 128-1290,2-6 HA
2N λ
s= 30° / γ
s= 12° ● ○ ● ○ ○ ○
� � 28-310,2-20 HA HB
2N λ
s= 30° / γ
s= 13° ● ○ ● ○ ○
� � 130-1320,25-20 HA HB
2N λ
s= 30° / γ
s= 12° ● ○ ● ○ ○ ○
� 32-332-20 HA HB
2N λ
s= 45° / γ
s= 15° ○ ● ○ ● ● ○
� 362-20 HA HB
2AL λ
s= 45° / γ
s= 15° ● ○
� 352-20 HA HB
2N λ
s= 0° / γ
s= 0° ● ○ ● ○ ○
� 2312-12 HA
2W λ
s= 45° / γ
s= 18° ●
HSC � 133-1340,2-6 HA
Mini-Micro-CutterMicro-End Mill
Micro-Ball Nose Cutter
Micro-Torus Cutter
Slot and end milling cutter
2W λ
s= 30° / γ
s= 12° ●
HSC � 342-12 HA
3-6N ● ● ● ● ○
HPC � 19-278-20 HA
Exchange Head Milling Range
Solid Carbide milling cutters
13 / 6 toolingcenter.com
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s=Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
Slot and end milling cutter
2W λ
s= 45° / γ
s= 14° ●
� 1353-20 HA
2W-HPC λ
s= 55° / γ
s= 7° ●
HPC � � 138-1412,7-25 HA HB
2W-HPC λ
s= 55° / γ
s= 7° ●
HPC � � 142-1453-25 HA HB
2W λ
s= 45° / γ
s= 20° ●
HSC � 1363-20 HA
2W-HPC λ
s= 55° / γ
s= 5° ●
HPC � 1373-20 HA
Roughing and Finishing Cutters
2WF λ
s= 45° / γ
s= 17° ● ○
� 764-20 HA HB
3N λ
s= 43-45° / γ
s= 10-14° ● ● ○ ○ ●
HPC � 155+1563-20 HB
3N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
� � 40+411-10 HB
3N λ
s= 30° / γ
s= 11° ● ○ ● ○ ○
� 371-20 HB
3N λ
s= 30° / γ
s= 13° ● ○ ● ○ ○
� 1462-20 HA HB
3N λ
s= 30° / γ
s= 11° ● ○ ● ○ ○ ○
� 38+391-20 HA HB
3N λ
s= 30° / γ
s= 13° ● ○ ● ○ ○ ○
� 1472,8-20 HB
3N λ
s= 30° / γ
s= 18° ● ○ ● ○ ○
� � 148+1492-20 (HB) 1
3N λ
s= 45° / γ
s= 13° ○ ● ○ ○ ● ●
� � 150+1510,5-10 HA (HB) 1
3N λ
s= 45° / γ
s= 13° ○ ● ○ ● ● ○
� � 42+431-10 HB
3N λ
s= 45° / γ
s= 15° ○ ● ○ ● ● ○
� 44+462-20 HA HB
3N λ
s= 45° / γ
s= 15° ○ ● ○ ● ●
� 452-20 HB
3N λ
s= 43-45° / γ
s= 13° ○ ● ○ ○ ●
� 157+1583-20 HB
3N λ
s= 43-45° / γ
s= 13° ○ ● ○ ○ ● ●
� 159-1603-20 HB
3W λ
s= 45° / γ
s= 14° ● ○
� 1613-20 HA
Solid Carbide milling cutters
13
toolingcenter.com 13 / 7
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s= Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
3W-HPC λ
s= 45° / γ
s= 7° ●
HPC � � 1523-20 HA
4N λ
s= 30° / γ
s= 12° ● ○ ● ○ ○ ○
HPC � 573-20 HA HB
4N λ
s= 35-38° / γ
s= 14° ● ● ○ ○ ●
HPC � 167-1683-20 HB
4N λ
s= 35-38° / γ
s= 5° ● ● ○ ○ ●
HPC � 1694-20 HB
4N λ
s= 35-38° / γ
s= 8° ● ●
HPC � 1663-20 HB
Slot and end milling cutter
Rough milling cutters
3W-HPC λ
s= 45° / γ
s= 7° ●
HPC � � 153+1543-25 HA HB
3W-HPC λ
s= 45° / γ
s= 9° ●
HPC � � 182+1833-20 HA HB
4N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
� 53-561,5-25 HA HB
4N λ
s= 30° / γ
s= 13° ● ○ ● ○ ○
� 1622-20 HA HB
4N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○
� 52+542-25 HA HB
4N λ
s= 30° / γ
s= 14° ● ○ ● ○ ○ ○
� 1632-20 HA HB
4N λ
s= 35-38° / γ
s= 10° ● ● ○ ○ ●
HPC � 164+1653-20 HB
4N λ
s= 45-54° / γ
s= 0° ○ ● ○ ● ● ○
HPC � 59+602-12 HA
4N λ
s= 50° / γ
s= 0° ○ ● ○ ● ● ○
� 693-20 HA
4N λ
s= 45° / γ
s= 6° ○ ● ○ ○ ●
� 1722-25 HB
4N λ
s= 45° / γ
s= 16° ○ ● ○ ● ●
� � 583-25 HB
4W-HPC λ
s= 45° / γ
s= 7° ●
HPC � � 170+1716-20 HA HB
4H λ
s= 52° / γ
s= -11° ● ○
� 173+1744-20 HB
4Ti λ
s= 35-38° / γ
s= 14° ● ●
HPC � 504-20 HB
4-5Ti λ
s= 35-38° / γ
s= 14° ● ●
HPC � 494-20 HB
Solid Carbide milling cutters
13 / 8 toolingcenter.com
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s= Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Length ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
End mills for finishing, profiling and hard milling
4-6H λ
s= 30-45° / γ
s= 10° ○ ●
� 703-20 HA HB
4-10H λ
s= 30-45° / γ
s= 0° ○ ●
� 71+722-20 HA HB
3-4NTR λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
� 786-20 HB
4NR λ
s= 20° / γ
s= 10° ● ○ ● ○ ○
� 184+1854-25 HB
4-5HR λ
s= 45° / γ
s= 10° ● ○ ● ○
� 80+816-25 HA HB
4WF λ
s= 30° / γ
s= 13° ● ○
� 1855-20 HB
Rough milling cutters
3-6AL λ
s= 45° / γ
s= 10° ○ ● ○ ● ●
� � 512-20 HA
6-8H λ
s= 45° / γ
s= 16° ○ ● ○ ● ● ○
� 745-25 HA HB
6-8N λ
s= 43-45° / γ
s= 13° ○ ● ○ ○ ● ●
� � 177-1794-32 HB
5-7W-HPC λ
s= 38° / γ
s= 17° ●
HPC � � 1756-20 HA
6-8H λ
s= 50° / γ
s= -5° ○ ● ○ ○ ● ●
� 180+1814-32 HA
6-8N λ
s= 45° / γ
s= 16° ○ ● ○ ● ●
� 735-25 HA HB
5-13N λ
s= 45° / γ
s= 2° ○ ● ○ ○ ●
� 1754-25 HA
8-16N λ
s= 50° / γ
s= 10° ○ ● ○ ● ● ○
HSC � 756-20 HA
4WF λ
s= 45° / γ
s= 10° ● ○
� 1866-20 HB
4-5HR λ
s= 45° / γ
s= 5° ○ ●
� 806-25 HA HB
4-6NR λ
s= 45° / γ
s= 11° ○ ● ○ ○ ●
� 1866-25 HB
6N λ
s= 45-48° / γ
s= 14° ● ● ○ ○ ●
HPC � 1766-25 HA
Solid Carbide milling cutters
toolingcenter.com 13 / 9
13
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s=Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
Ball nose end milling cutters
2H λ
s= 30° / γ
s= -3° ● ○ ● ○ ○ ○
� 831-20 HA
2H λ
s= 30° / γ
s= -3° ● ○ ● ○ ○ ○
� 842-12 HA
2N λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
� 821-12 HA
2N λ
s= 30° / γ
s= 12° ● ○ ● ○ ○ ○
� � 92-950,1-20 HA HB
2H λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
� 1870,2-20 HA
2H λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
� 188-1890,2-6 HA
2N λ
s= 30° / γ
s= 4° ● ○ ● ○ ○ ○
HSC � 190-1910,2-20 HA
2H λ
s= 30° / γ
s= 4° ● ○ ● ○ ○ ○
HSC � 192-1930,2-20 HA
2N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
� � 195+1963-20 HB
2N λ
s= 45° / γ
s= 15° ○ ● ○ ● ● ○
� � 98+993-20 HB
2W λ
s= 45° / γ
s= 18° ●
HSC � 197-1980,2-6 HA
2N λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
HSC � 880,5-16 HA
2N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○
� 892-16 HA
2AL λ
s= 30° / γ
s= 18° ● ○
� 960,5-12 HA
2AL λ
s= 30° / γ
s= 18° ● ○
HSC � 970,5-12 HA
2W λ
s= 30° / γ
s= 12° ●
HSC � 910,5-12 HA
2N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
HSC � 902-16 HA
4SCR λ
s= 35°-38° / γ
s= 7° ● ○ ● ○ ○ ○
HPC � 686-16 HA HB
Ball nose end milling cutters
Solid Carbide milling cutters
13 / 10 toolingcenter.com
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s=Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
4N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
� 1012-16 HA HB
4N λ
s= 45° / γ
s= 10° ○ ● ○ ○ ● ●
� 2053-20 HA HB
Ball nose end milling cutters
2W-HPC λ
s= 55° / γ
s= 7° ●
HPC � � 200+2013-20 HA
2H λ
s= 30° / γ
s= 0° ○ ●
� 86-870,1-20 HA HB
3N λ
s= 45° / γ
s= 10° ● ● ○ ○ ●
HPC � 2024-20 HA
4N λ
s= 30° / γ
s= 6° ● ○ ● ○ ○ ○
� � 203+2043-20 HB
4NR λ
s= 20° / γ
s= 10° ● ○ ● ○ ○
� 2066-20 HB
4N λ
s= 45° / γ
s= 15° ○ ● ○ ● ● ○
� 1023-20 HA HB
4H λ
s= 30° / γ
s= 0° ○ ●
� 1002-20 HA HB
2N λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
� 1050,5-16 HA
2H λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
HSC � 207-2080,2-6 HA
2W λ
s= 45° / γ
s= 18° ●
HSC � 211-2120,2-6 HA
2N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○ ○
HSC � 1072-16 HA
Torus end milling cutters
2H λ
s= 30° / γ
s= 0° ○ ●
� 841-6 HA
2H λ
s= 30° / γ
s= 0° ○ ●
� 850,5-16 HA
2W λ
s= 30° / γ
s= 5° ●
HSC � 1940,6-2 HA
2W λ
s= 45° / γ
s= 14° ●
HSC � 1993-20 HA
4SCR λ
s= 45° / γ
s= 7° ● ● ○ ○ HPC
HSC � 673-16 HA HB
Torus end milling cutters
Solid Carbide milling cutters
toolingcenter.com 13 / 11
13
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s=Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
Torus end milling cutters
4-8H λ
s= 0° / γ
s= -2° ● ○ ○ ●
� 1123-16 HA HB
4N λ
s= 50° / γ
s= 0° ○ ● ○ ● ● ○
HSC � 1183-20 HA
4N λ
s= 45° / γ
s= 8° ○ ● ○ ● ● ○
HSC � 1153-20 HA
4H λ
s= 45° / γ
s= 8° ● ○ ○ ● ● ○
HSC � 1173-20 HA
4W λ
s= 30° / γ
s= 5° ●
HSC � 2174-12 HA
4N γ
s= 5° / γ
s= 4° ● ○ ○ ○ ○ ●
HFC � 1136-16 HA
2W λ
s= 30° / γ
s= 18° ● ○
HSC � 1110,5-12 HA
2W λ
s= 30° / γ
s= 12° ● ○
HSC � � 109+1103-16 HA
2W λ
s= 45° / γ
s= 15° ●
HSC � 213-2142-12 HA
2W λ
s= 30° / γ
s= 12° ●
HSC � 1082-12 HA
4H λ
s= 30° / γ
s= 0° ● ○ ● ○ ○ ○
HSC � 215-2164-20 HA
4-6N λ
s= 30° / γ
s= 5° ● ○ ● ○ ○ ○
HSC � 1143-12 HA
4H λ
s= 52° / γ
s= 0° ○ ○ ●
HPC � 2186-20 HA
High Feed Milling Cutter
4H λ
s= 52° / γ
s= 8° ● ● ○ ○
HPC � 2196-20 HA
4H λ
s= 45° / γ
s= 12° ○ ● ○ ● ● ○
HSC � 1167-17 HA
2H λ
s= 30° / γ
s= 0° ○ ●
HSC � 103+1040,5-16 HA HB
2N λ
s= 30° / γ
s= 10° ● ○ ● ○ ○
� 1062-16 HA
2H λ
s= 30° / γ
s= 3° ● ○ ● ○ ○ ○
� 209-2102-12 HA
Solid Carbide milling cutters
13 / 12 toolingcenter.com
Solid Carbide Milling ToolsN
umbe
r of
teet
hλ
s=Helix angle
Dia
met
er (m
m)
Leng
th
Colour code ● = Main application
Hig
h pe
rfor
man
ce e
nd m
ills
coat
ed
unco
ated
γs= rake angle
Stee
lSt
ainl
ess
Cas
t iro
nN
on fe
rrou
s m
etal
sH
eat r
esis
tant
Tem
pere
d st
eel
○ = Extended application
Tool type ( )1
= Shank similar to Form HB
HPC = High Performance Cutter
Shar
p-ed
ged
Edge
Pro
tect
ion
Cha
mfe
r
Rad
ius
HSC = High Speed Cutter
HFC = High Feed Cutter
zShank Type
� � Page(s) Page(s)Ø d1 HA HB Example illustration
W ●HSC � 2255-16 HA
2W ●
� 2302-12 HA
119-127 220
Plastics-GFK- / -CFK- Cutters
W ●HSC � 2266-44 HA
2W ●
HSC � 2262-12 HA
1W ●
HSC � 2283-20 HA
W ●HSC � 2291,5-12 HA
3W ●
HSC � 2303-20 HA
Form, deburr and die milling cutters / burrs
W ●� 222+2232-20 HA
1W λ
s= 25° / γ
s= 20° ●
HSC � 231 2271,5-20 HAW ●
HSC � 2242-20 HA
Solid Carbide milling cutters
13
toolingcenter.com 13 / 13
HPC Milling Cutter
Maximum process security with highest feed rates
The benchmark for steel, cast iron and hard machining
page 61-68
The type SCR, gives maximum chip evacuation even with large cutting depths. Combined with the cold air nozzle the chip direction is controlled and the process secure.
With the Ti1200 coating, the type SCR achieves tremendous tool life when machining tool steel.
Due to the extensive program, - DIN short and long - Factory standard long and extra long - with thro' coolant - with corner radius - DIN short and long z6 - Factory standard extra long z6
the Type SCR is extremely versatile.
The coating is also suitable up to 1200 °C and can be utilised for cast iron and hard machining.
r2
r
tmax
r1
3D
NEW now available with the usual outstanding cutting performance: - HPC Solid Carbide Ball Nosed End Mills
- HPC / HSC solid carbide torus end mills
Latest geometry for use as HSC tool with low depth of cut and high feed and as HPC tool with high feed rates. Even with high feed rates slots are possible up to 1xØ.
Geometry
t max = Maximum deviation from the radius r leaving residual material
r3D = Radius to be programmed in CAM system
r1= Tangential radius between front radius and circumference cutting edge
r2 = Face radius
Solid Carbide milling cutters
13 / 14 toolingcenter.com
Key features of the outstanding exchange head system from WNT:
- Most stable interface on the market - Radial run out accuracy ≤ 5 μm - A system for milling, spot drilling, reaming and chamfering - Large holder programme - Head change in the machine thanks to small l3-Tolerance
New dimension in stainless machining
page 47+48
Solid carbide HPC end mill with and without coolant ducts, particularly for the machining of stainless and heat resistant materials.
Geometry, irregular pitch, irregular helix angle and the Radial relief angle make the Type ICR a soft cutting tool with excellent smooth machining and high stability with a very good rupture resistance.
In combination with the AlTiN-Nanolayer-PVD-coating Ti1500 the Type ICR can be applied up to a temperature of 900° C
Apart from its specific suitability the type ICR is applicable in steel, cast iron, Non-ferrous materials and for hard machining.
With three overall length ratios you are prepared for most tasks in the best way and by the universal application of the type ICR stock holding is reduced. Therefore making this range the most economical.
MultiChange - the system for all applications
Diamond
Exchangeable heads with PCD inserts as:
- Shoulder milling cutter
- Ball nose end milling cutters
- Torus end milling cutters
page 19-27
Solid Carbide milling cutters
toolingcenter.com 13 / 15
13
Solid carbide micro end mill, factory standard - Tx = maximum engagement depth
l 3
d1
l 1
l 6
l 2
d3
d2
α
β
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 l2 d3 l3 l6 l1 α° β°
d2 h5 TX Z 52 801 ... 52 801 ...mm mm mm mm mm mm mm £ £0.2 0.12 0.16 0.44 5.7 38 15.0 14 3 2,2 x d1 2 54.69 528010210.2 0.20 0.16 0.44 5.7 43 15.0 14 3 2,2 x d1 2 54.69 528010220.2 0.20 0.16 1.00 6.4 38 15.0 13 3 5 x d1 2 54.69 528010230.2 0.20 0.16 1.00 6.4 43 15.0 13 3 5 x d1 2 54.69 528010240.2 0.20 0.16 2.00 9.2 38 15.0 9 3 10 x d1 2 54.69 528010250.2 0.20 0.16 2.00 9.2 43 15.0 9 3 10 x d1 2 54.69 528010260.5 0.30 0.40 1.10 5.8 38 15.0 13 3 2,2 x d1 2 42.04 528010510.5 0.50 0.40 1.10 5.8 43 15.0 13 3 2,2 x d1 2 42.04 528010520.5 0.50 0.40 2.50 7.8 38 15.0 10 3 5 x d1 2 42.04 528010530.5 0.50 0.40 2.50 7.8 43 15.0 10 3 5 x d1 2 42.04 528010540.5 0.50 0.40 5.00 10.7 38 13.0 7 3 10 x d1 2 42.04 528010550.5 0.50 0.40 5.00 14.5 43 13.0 5 3 10 x d1 2 42.04 528010560.8 0.48 0.64 1.76 5.9 38 15.0 11 3 2,2 x d1 2 48.25 528010810.8 0.80 0.64 1.76 5.9 43 15.0 11 3 2,2 x d1 2 48.25 528010820.8 0.80 0.64 4.00 9.0 38 15.0 7 3 5 x d1 2 48.25 528010830.8 0.80 0.64 4.00 9.0 43 15.0 7 3 5 x d1 2 48.25 528010840.8 0.80 0.64 8.00 13.5 38 12.0 5 3 10 x d1 2 48.25 528010850.8 0.80 0.64 8.00 15.5 43 9.8 5 3 10 x d1 2 48.25 528010861.0 0.60 0.80 2.20 5.9 38 15.0 10 3 2,2 x d1 2 40.23 528011011.0 1.00 0.80 2.20 5.9 43 15.0 10 3 2,2 x d1 2 40.23 528011021.0 1.00 0.80 5.00 9.7 43 15.0 6 3 5 x d1 2 40.23 528011031.0 1.00 0.80 5.00 9.7 50 15.0 6 3 5 x d1 2 40.23 528011041.0 1.00 0.80 10.00 15.3 43 11.0 4 3 10 x d1 2 41.47 528011051.0 1.00 0.80 10.00 20.6 50 8.5 3 3 10 x d1 2 41.47 528011061.5 0.90 1.20 3.30 6.1 38 15.0 8 3 2,2 x d1 2 43.28 528011511.5 1.50 1.20 3.30 6.1 43 15.0 8 3 2,2 x d1 2 43.28 528011521.5 1.50 1.20 7.50 11.8 43 14.0 4 3 5 x d1 2 43.28 528011531.5 1.50 1.20 7.50 11.8 50 14.0 4 3 5 x d1 2 43.28 528011541.5 1.50 1.20 15.00 18.1 43 14.6 3 3 10 x d1 2 46.22 528011551.5 1.50 1.20 15.00 22.0 50 6.2 2 3 10 x d1 2 46.22 528011561.8 1.08 1.44 3.96 6.2 38 15.0 6 3 2,2 x d1 2 43.28 528011811.8 1.80 1.44 3.96 6.2 43 15.0 6 3 2,2 x d1 2 43.28 528011821.8 1.80 1.44 9.00 12.9 43 12.0 3 3 5 x d1 2 43.84 528011831.8 1.80 1.44 9.00 12.9 50 12.0 3 3 5 x d1 2 43.84 528011841.8 1.80 1.44 18.00 20.0 43 19.8 2 3 10 x d1 2 49.04 528011851.8 1.80 1.44 18.00 22.0 50 5.3 2 3 10 x d1 2 49.04 528011862.0 1.20 1.60 4.40 11.9 50 15.0 10 6 2,2 x d1 2 43.28 528012012.0 2.00 1.60 4.40 11.9 57 15.0 10 6 2,2 x d1 2 43.28 528012022.0 2.00 1.60 10.00 19.7 50 15.0 6 6 5 x d1 2 43.84 528012032.0 2.00 1.60 10.00 19.7 57 15.0 6 6 5 x d1 2 43.84 528012042.0 2.00 1.60 20.00 25.0 50 22.1 5 6 10 x d1 2 49.04 528012052.0 2.00 1.60 20.00 29.0 57 7.8 4 6 10 x d1 2 49.04 52801206
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 234-241● ● ● ● ● ●
Solid Carbide milling cutters
13 / 16 toolingcenter.com
Solid carbide ball nosed micro-cutter, factory standard - Tx = maximum engagement depth
l 3
d1
l 1
l 6
l 2
d3
d2
r
α
β
Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 ±0,01 l2 d3 l3 l6 l1 α° β°
d2 h5 r ±0,005 TX Z 52 803 ... 52 803 ... 52 803 ...mm mm mm mm mm mm mm mm £ £ £0.2 0.12 0.16 0.44 5.7 38 15.0 14 3 0.10 2,2 x d1 2 61.13 528030210.2 0.12 0.16 0.44 5.7 50 15.0 14 3 0.10 2,2 x d1 2 61.13 528030220.2 0.12 0.16 0.44 11.3 80 15.0 15 6 0.10 2,2 x d1 2 61.13 528030230.2 0.20 0.16 1.00 6.4 38 15.0 13 3 0.10 5 x d1 2 61.13 528030240.2 0.20 0.16 1.00 6.4 50 15.0 13 3 0.10 5 x d1 2 61.13 528030250.2 0.20 0.16 1.00 12.0 80 15.0 14 6 0.10 5 x d1 2 61.13 528030260.2 0.20 0.16 2.00 9.2 38 15.0 9 3 0.10 10 x d1 2 61.13 528030270.2 0.20 0.16 2.00 9.2 50 15.0 9 3 0.10 10 x d1 2 61.13 528030280.2 0.20 0.16 2.00 14.8 80 15.0 12 6 0.10 10 x d1 2 61.13 528030290.5 0.30 0.40 1.10 5.8 38 15.0 13 3 0.25 2,2 x d1 2 47.69 528030510.5 0.30 0.40 1.10 5.8 50 15.0 13 3 0.25 2,2 x d1 2 47.69 528030520.5 0.30 0.40 1.10 11.4 80 15.0 14 6 0.25 2,2 x d1 2 47.69 528030530.5 0.50 0.40 2.50 7.8 38 15.0 10 3 0.25 5 x d1 2 47.69 528030540.5 0.50 0.40 2.50 7.8 50 15.0 10 3 0.25 5 x d1 2 47.69 528030550.5 0.50 0.40 2.50 13.4 80 15.0 12 6 0.25 5 x d1 2 47.69 528030560.5 0.50 0.40 5.00 10.7 38 13.0 7 3 0.25 10 x d1 2 47.69 528030570.5 0.50 0.40 5.00 14.5 50 13.0 5 3 0.25 10 x d1 2 47.69 528030580.5 0.50 0.40 5.00 20.2 80 15.0 8 6 0.25 10 x d1 2 47.69 528030590.8 0.48 0.64 1.76 5.9 38 15.0 11 3 0.40 2,2 x d1 2 53.68 528030810.8 0.48 0.64 1.76 5.9 50 15.0 11 3 0.40 2,2 x d1 2 53.68 528030820.8 0.48 0.64 1.76 11.5 80 15.0 13 6 0.40 2,2 x d1 2 53.68 528030830.8 0.80 0.64 4.00 9.0 38 15.0 7 3 0.40 5 x d1 2 53.68 528030840.8 0.80 0.64 4.00 9.0 50 15.0 7 3 0.40 5 x d1 2 53.68 528030850.8 0.80 0.64 4.00 14.6 80 15.0 11 6 0.40 5 x d1 2 53.68 528030860.8 0.80 0.64 8.00 10.5 38 8.2 6 3 0.40 10 x d1 2 54.35 528030870.8 0.80 0.64 8.00 18.7 50 9.8 4 3 0.40 10 x d1 2 54.35 528030880.8 0.80 0.64 8.00 25.9 80 14.8 6 6 0.40 10 x d1 2 54.35 528030891.0 0.60 0.80 2.20 7.8 43 15.0 11 4 0.50 2,2 x d1 2 45.65 528031011.0 0.60 0.80 2.20 7.8 60 15.0 11 4 0.50 2,2 x d1 2 45.65 528031021.0 0.60 0.80 2.20 11.5 80 15.0 13 6 0.50 2,2 x d1 2 45.65 528031031.0 1.00 0.80 5.00 11.6 43 15.0 8 4 0.50 5 x d1 2 45.65 528031041.0 1.00 0.80 5.00 11.6 60 15.0 8 4 0.50 5 x d1 2 45.65 528031051.0 1.00 0.80 5.00 15.3 80 15.0 10 6 0.50 5 x d1 2 45.65 528031061.0 1.00 0.80 10.00 18.3 43 8.0 5 4 0.50 10 x d1 2 49.16 528031071.0 1.00 0.80 10.00 23.7 60 10.2 4 4 0.50 10 x d1 2 49.16 528031081.0 1.00 0.80 10.00 28.7 80 13.0 5 6 0.50 10 x d1 2 49.16 528031091.2 0.72 0.96 2.64 7.9 43 15.0 11 4 0.60 2,2 x d1 2 50.85 528031211.2 0.72 0.96 2.64 7.9 60 15.0 11 4 0.60 2,2 x d1 2 50.85 528031221.2 0.72 0.96 2.64 11.6 80 15.0 12 6 0.60 2,2 x d1 2 50.85 528031231.2 1.20 0.96 6.00 12.4 43 15.0 7 4 0.60 5 x d1 2 50.85 528031241.2 1.20 0.96 6.00 12.4 60 15.0 7 4 0.60 5 x d1 2 50.85 528031251.2 1.20 0.96 6.00 16.2 80 15.0 9 6 0.60 5 x d1 2 50.85 528031261.2 1.20 0.96 12.00 18.2 43 9.3 5 4 0.60 10 x d1 2 52.65 528031271.2 1.20 0.96 12.00 26.1 60 9.1 4 4 0.60 10 x d1 2 52.65 528031281.2 1.20 0.96 12.00 31.8 80 11.7 5 6 0.60 10 x d1 2 52.65 528031291.5 0.90 1.20 3.30 8.0 43 15.0 9 4 0.75 2,2 x d1 2 47.91 528031511.5 0.90 1.20 3.30 8.0 60 15.0 9 4 0.75 2,2 x d1 2 47.91 528031521.5 0.90 1.20 3.30 11.7 80 15.0 11 6 0.75 2,2 x d1 2 47.91 528031531.5 1.50 1.20 7.50 13.7 43 15.0 6 4 0.75 5 x d1 2 50.61 52803154
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 234-241● ● ● ● ● ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 17
Solid carbide ball nosed micro-cutter, factory standard - Tx = maximum engagement depth
l 3
d1
l 1
l 6
l 2
d3
d2
r
α
β
Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 ±0,01 l2 d3 l3 l6 l1 α° β°
d2 h5 r ±0,005 TX Z 52 803 ... 52 803 ... 52 803 ...mm mm mm mm mm mm mm mm £ £ £1.5 1.50 1.20 7.50 13.7 60 15.0 6 4 0.75 5 x d1 2 50.61 528031551.5 1.50 1.20 7.50 17.4 80 15.0 8 6 0.75 5 x d1 2 50.61 528031561.5 1.50 1.20 15.00 18.1 43 13.5 4 4 0.75 10 x d1 2 50.61 528031571.5 1.50 1.20 15.00 28.0 60 7.8 3 4 0.75 10 x d1 2 50.61 528031581.5 1.50 1.20 15.00 35.8 80 10.2 4 6 0.75 10 x d1 2 50.61 528031591.8 1.08 1.44 3.96 8.1 43 15.0 8 4 0.90 2,2 x d1 2 50.61 528031811.8 1.08 1.44 3.96 8.1 60 15.0 8 4 0.90 2,2 x d1 2 50.61 528031821.8 1.08 1.44 3.96 11.8 80 15.0 11 6 0.90 2,2 x d1 2 50.61 528031831.8 1.80 1.44 9.00 15.0 43 15.0 5 4 0.90 5 x d1 2 50.61 528031841.8 1.80 1.44 9.00 15.0 60 15.0 5 4 0.90 5 x d1 2 50.61 528031851.8 1.80 1.44 9.00 18.7 80 15.0 7 6 0.90 5 x d1 2 50.61 528031861.8 1.80 1.44 18.00 19.5 43 31.1 4 4 0.90 10 x d1 2 52.65 528031871.8 1.80 1.44 18.00 31.9 60 6.8 2 4 0.90 10 x d1 2 52.65 528031881.8 1.80 1.44 18.00 39.3 80 9.1 4 6 0.90 10 x d1 2 52.65 528031892.0 1.20 1.60 4.40 11.9 57 15.0 10 6 1.00 2,2 x d1 2 47.57 528032012.0 1.20 1.60 4.40 11.9 70 15.0 10 6 1.00 2,2 x d1 2 47.57 528032022.0 1.20 1.60 4.40 11.9 80 15.0 10 6 1.00 2,2 x d1 2 47.57 528032032.0 2.00 1.60 10.00 19.7 57 15.0 6 6 1.00 5 x d1 2 50.61 528032042.0 2.00 1.60 10.00 19.7 70 15.0 6 6 1.00 5 x d1 2 50.61 528032052.0 2.00 1.60 10.00 19.7 80 15.0 6 6 1.00 5 x d1 2 50.61 528032062.0 2.00 1.60 20.00 32.0 57 9.5 4 6 1.00 10 x d1 2 50.61 528032072.0 2.00 1.60 20.00 41.4 70 8.5 3 6 1.00 10 x d1 2 50.61 528032082.0 2.00 1.60 20.00 41.4 80 8.5 3 6 1.00 10 x d1 2 50.61 52803209
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 234-241● ● ● ● ● ●
Solid Carbide milling cutters
13 / 18 toolingcenter.com
Solid carbide micro torus cutter, factory standard - Tx = maximum engagement depth
l 3
d1
l 1
l 6
l 2
d3
d2
r
α
β
Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 ±0,01 r ±0,005 l2 d3 l3 l6 l1 α° β°
d2 h5 TX Z 52 805 ... 52 805 ... 52 805 ...mm mm mm mm mm mm mm mm £ £ £0.5 0.1 0.3 0.4 1.1 5.8 38 15.0 13 3 2,2 x d1 2 48.59 528050510.5 0.1 0.3 0.4 1.1 5.8 50 15.0 13 3 2,2 x d1 2 48.59 528050520.5 0.1 0.3 0.4 1.1 11.4 80 15.0 14 6 2,2 x d1 2 48.59 528050530.5 0.1 0.5 0.4 2.5 7.8 38 15.0 10 3 5 x d1 2 48.59 528050540.5 0.1 0.5 0.4 2.5 7.8 50 15.0 10 3 5 x d1 2 48.59 528050550.5 0.1 0.5 0.4 2.5 13.4 80 15.0 12 6 5 x d1 2 48.59 528050560.5 0.1 0.5 0.4 5.0 10.7 38 13.0 7 3 10 x d1 2 48.59 528050570.5 0.1 0.5 0.4 5.0 14.5 50 13.0 5 3 10 x d1 2 48.59 528050580.5 0.1 0.5 0.4 5.0 20.2 80 15.0 8 6 10 x d1 2 48.59 528050591.0 0.2 0.6 0.8 2.2 7.8 43 15.0 11 4 2,2 x d1 2 46.44 528051011.0 0.2 0.6 0.8 2.2 7.8 60 15.0 11 4 2,2 x d1 2 46.44 528051021.0 0.2 0.6 0.8 2.2 11.5 80 15.0 13 6 2,2 x d1 2 46.44 528051031.0 0.2 1.0 0.8 5.0 11.6 43 15.0 8 4 5 x d1 2 50.17 528051041.0 0.2 1.0 0.8 5.0 11.6 60 15.0 8 4 5 x d1 2 50.17 528051051.0 0.2 1.0 0.8 5.0 15.3 80 15.0 10 6 5 x d1 2 50.17 528051061.0 0.2 1.0 0.8 10.0 18.3 43 8.0 5 4 10 x d1 2 50.17 528051071.0 0.2 1.0 0.8 10.0 23.7 60 10.2 4 4 10 x d1 2 50.17 528051081.0 0.2 1.0 0.8 10.0 28.7 80 13.0 5 6 10 x d1 2 50.17 528051091.5 0.3 0.9 1.2 3.3 8.0 43 15.0 9 4 2,2 x d1 2 48.70 528051511.5 0.3 0.9 1.2 3.3 8.0 60 15.0 9 4 2,2 x d1 2 48.70 528051521.5 0.3 0.9 1.2 3.3 11.7 80 15.0 11 6 2,2 x d1 2 48.70 528051531.5 0.3 1.5 1.2 7.5 13.7 43 15.0 6 4 5 x d1 2 51.63 528051541.5 0.3 1.5 1.2 7.5 13.7 60 15.0 6 4 5 x d1 2 51.63 528051551.5 0.3 1.5 1.2 7.5 17.4 80 15.0 8 6 5 x d1 2 51.63 528051561.5 0.3 1.5 1.2 15.0 18.1 43 13.5 4 4 10 x d1 2 51.63 528051571.5 0.3 1.5 1.2 15.0 29.2 60 7.8 3 4 10 x d1 2 51.63 528051581.5 0.3 1.5 1.2 15.0 35.8 80 10.2 4 6 10 x d1 2 51.63 528051592.0 0.5 1.2 1.6 4.4 11.9 57 15.0 10 6 2,2 x d1 2 48.48 528052012.0 0.5 1.2 1.6 4.4 11.9 70 15.0 10 6 2,2 x d1 2 48.48 528052022.0 0.5 1.2 1.6 4.4 11.9 80 15.0 10 6 2,2 x d1 2 48.48 528052032.0 0.5 2.0 1.6 10.0 19.7 57 15.0 6 6 5 x d1 2 51.63 528052042.0 0.5 2.0 1.6 10.0 19.7 70 15.0 6 6 5 x d1 2 51.63 528052052.0 0.5 2.0 1.6 10.0 19.7 80 15.0 6 6 5 x d1 2 51.63 528052062.0 0.5 2.0 1.6 20.0 32.0 57 9.5 4 6 10 x d1 2 51.63 528052072.0 0.5 2.0 1.6 20.0 41.4 70 8.5 3 6 10 x d1 2 51.63 528052082.0 0.5 2.0 1.6 20.0 41.4 80 8.5 3 6 10 x d1 2 51.63 52805209
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 234-241● ● ● ● ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 19
13
Multichange Programme Overview
Milling Heads / Reaming Heads Tool holder
Solid Carbide NC Spot Drill, refer to chapter Solid Carbide Drilling.
Reamers, refer to chapter Reaming and Countersinking. Holders and accessories can be found in chapter Rotating
Toolholders.
PCD End, Radius and Torus Cutters Z2
Ø 8, 10, 12, 16 mm
● ○ ● ●
DIAMOND Page 20-22
Solid Carbide End Mill Z3-4
Ø 8, 10, 12, 16, 20 mm
● ○ ● ○
Page 23
Solid Carbide Roughing-Finishing Cutter Z4-6
Ø 8, 10, 12, 16, 20 mm
● ○ ● ●
Page 24
Solid Carbide Finishing Cutter Z6
Ø 8, 10, 12, 16, 20 mm
● ○ ● ●
Page 24
Solid Carbide High Feed Cutter Z6
Ø 8, 10, 12, 16, 20 mm
● ● ● ○
Page 25
Solid Carbide Torus Cutter Z4
Ø 8, 10, 12, 16, 20 mm
● ○ ● ○
Page 26
Solid Carbide Ball Nosed Cutter Z4
Ø 10, 12, 16, 20 mm
● ○ ● ○
Page 25
Solid Carbide Deburring Cutter Z4-6
Ø 10, 12, 16, 20, 25 mm
● ○ ● ●
Page 27
Solid Carbide NC Spot Drill 90°, 120°, 142° Z2
Ø 10, 12, 16, 20 mm
● ○ ● ●
Thro‘ Hole Reamers Z4-6
Ø 8-30,2 mm incl. special diameters
● ● ● ● ○
Blind Hole Reamers Z6
Ø 12,2-30,2 mm incl. special diameters
● ● ● ● ○
Steel Holder Extra Short
Cylindrical / Tapered 87°
Length 60-90 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Short
cylindrical
Length 85-120 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Short
87° taper
Length 85-120 mm
for Ø 8, 10, 12, 16, 20 mm
Solid Carbide Holder Medium
Cylindrical / Tapered 87°
Length 110-150 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Long
cylindrical
Length 150-200 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Long
87° taper
Length 150-200 mm
for Ø 8, 10, 12, 16, 20 mm
Steel Holder Extra Long
cylindrical
Length 200-250 mm
for Ø 16,20 mm
Spanner
SW 6, 8, 10, 13, 16, 19, 21, 24
Spanner Head
SW 6, 8, 10, 13, 16, 19, 21, 24
Torque Wrench
3-25 Nm / 20-200 Nm
Main and Secondary Application
Steel Stainless Cast iron Non ferrous metals Heat resistant Tempered steel
Steel Holder Extra Short
Cylindrical / Tapered 87°
Length 60-90 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Short
cylindrical
Length 85-120 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Short
87° taper
Length 85-120 mm
for Ø 8, 10, 12, 16, 20 mm
Solid Carbide Holder Medium
Cylindrical / Tapered 87°
Length 110-150 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Long
cylindrical
Length 150-200 mm
for Ø 8, 10, 12, 16, 20 mm
Holder Steel / Solid Carbide, Long
87° taper
Length 150-200 mm
for Ø 8, 10, 12, 16, 20 mm
Steel Holder Extra Long
cylindrical
Length 200-250 mm
for Ø 16,20 mm
Spanner
SW 6, 8, 10, 13, 16, 19, 21, 24
Spanner Head
SW 6, 8, 10, 13, 16, 19, 21, 24
Torque Wrench
3-25 Nm / 20-200 Nm
Solid Carbide NC Spot Drill 90°, 120°, 142° Z2
Ø 10, 12, 16, 20 mm
● ○ ● ●
Thro‘ Hole Reamers Z4-6
Ø 8-30,2 mm incl. special diameters
● ● ● ● ○
Blind Hole Reamers Z6
Ø 12,2-30,2 mm incl. special diameters
● ● ● ● ○
Solid Carbide milling cutters
13 / 20 toolingcenter.com
PCD End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
l1
Ød1
KLG
Ød3
K DIAMOND
PG V8Article no.
d1
KLG l2 d3 l3 ±0,02 l1 K
Z ap max SW M 52 880 ...
mm mm mm mm mm mm mm mm Nm £8 06 8 7.4 17 26.4 0,1 2 6 6 5 494.40 52880080
10 08 10 9.4 20 33.9 0,1 2 8 8 12,5 574.74 5288010012 10 12 11.0 24 38.1 0,1 2 8 10 15 699.89 5288012016 12 15 15.0 28 45.3 0,1 2 8 13 20 974.90 52880160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 272+273 ●
PCD End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
l1
Ød1
KLG
Ød3
K DIAMOND
PG V8Article no.
d1
KLG l2 d3 l3 ±0,02 l1 K
Z ap max SW M 52 880 ...
mm mm mm mm mm mm mm mm Nm £8 06 8 7.4 17 26.4 0,1 2 6 6 5 494.40 52880081
10 08 10 9.4 20 33.9 0,1 2 8 8 12,5 574.74 5288010112 10 12 11.0 24 38.1 0,1 2 8 10 15 699.89 5288012116 12 15 15.0 28 45.3 0,1 2 8 13 20 974.90 52880161
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 272+273 ●
Applies to both heads: - A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
13
toolingcenter.com 13 / 21
PCD End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
l1
Ød1
KLG
Ød3
K DIAMOND
PG V8Article no.
d1
KLG l2 d3 l3 ±0,02 l1 K
Z ap max SW M 52 880 ...
mm mm mm mm mm mm mm mm Nm £8 06 8 7.4 17 26.4 0,1 2 6 6 5 494.40 52880082
10 08 10 9.4 20 33.9 0,1 2 8 8 12,5 574.74 5288010212 10 12 11.0 24 38.1 0,1 2 8 10 15 699.89 5288012216 12 15 15.0 28 45.3 0,1 2 8 13 20 974.90 52880162
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 272+273 ●
- A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
13 / 22 toolingcenter.com
PCD Ball Nosed End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
KLG
l2
l3
l1
Ød1
Ød3
r DIAMOND
PG V8Article no.
d1
KLG l2 d3 l3 ±0,02 l1 r
Z ap max SW M 52 881 ...
mm mm mm mm mm mm mm mm Nm £8 06 8 7.4 17 26.4 4 2 6 6 5 659.72 52881080
10 08 10 9.4 20 33.9 5 2 8 8 12,5 665.90 5288110012 10 10 11.2 22 36.1 6 2 8 10 15 775.59 5288112016 12 10 15.0 28 45.3 8 2 8 13 20 803.40 52881160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 272+273 ●
PCD Torus End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
l1
Ød1
KLG
Ød3
r DIAMOND
PG V8Article no.
d1
KLG l2 d3 l3 ±0,02 l1 r
Z ap max SW M 52 882 ...
mm mm mm mm mm mm mm mm Nm £8 06 8 7.4 17 26.4 0.5 2 6 6 5 611.82 528820808 06 8 7.4 17 26.4 1.0 2 6 6 5 611.82 528820818 06 8 7.4 17 26.4 1.5 2 6 6 5 611.82 528820828 06 8 7.4 17 26.4 2.0 2 6 6 5 611.82 5288208310 08 10 9.2 20 33.9 0.5 2 8 8 12,5 644.27 5288210010 08 10 9.2 20 33.9 1.0 2 8 8 12,5 644.27 5288210110 08 10 9.2 20 33.9 1.5 2 8 8 12,5 644.27 5288210210 08 10 9.2 20 33.9 2.0 2 8 8 12,5 644.27 5288210312 10 10 11.2 22 36.1 0.5 2 8 10 15 690.62 5288212012 10 10 11.2 22 36.1 1.0 2 8 10 15 690.62 5288212112 10 10 11.2 22 36.1 1.5 2 8 10 15 690.62 5288212212 10 10 11.2 22 36.1 2.0 2 8 10 15 690.62 52882123
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 272 ●
Applies to both heads: - A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
toolingcenter.com 13 / 23
13
Solid Carbide End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
KØd1
l1Ød3
KLG
Ti 1100
PG V1Article no.
d1
KLG l2 d3 l3 ±0,02 l1 K
Z ap max SW M 52 861 ...
mm mm mm mm mm mm mm mm Nm £8 06 6.0 7.8 11 20.4 0,16 3 4.5 6 5 48.18 52861080
10 08 7.5 9.8 13 26.9 0,2 3 5.6 8 12,5 54.75 5286110012 10 9.0 11.8 16 30.1 0,24 3 6.8 10 15 68.58 5286112016 12 12.0 15.8 20 37.3 0,32 3 9.0 13 20 95.68 5286116020 16 15.0 19.8 25 47.2 0,4 3 11.3 16 25 122.20 52861200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 274● ○ ● ○
Solid Carbide End Mill, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
KØd1
l1Ød3
KLG
Ti 1100
PG V1Article no.
d1
KLG l2 d3 l3 ±0,02 l1 K
Z ap max SW M 52 860 ...
mm mm mm mm mm mm mm mm Nm £8 06 6.0 7.8 11 20.4 0,16 4 4.5 6 5 52.35 52860080
10 08 7.5 9.8 13 26.9 0,2 4 5.6 8 12,5 58.71 5286010012 10 9.0 11.8 16 30.1 0,24 4 6.8 10 15 74.58 5286012016 12 12.0 15.8 20 37.3 0,32 4 9.0 13 20 107.08 5286016020 16 15.0 19.8 25 47.2 0,4 4 11.3 16 25 138.49 52860200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 274● ○ ● ○
Applies to both heads: - A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
13 / 24 toolingcenter.com
Solid Carbide Roughing-Finishing Cutter, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
KØd1
l1
Ød3
KLG
Ti 1100
PG V1Article no.
d1
KLG l2 d3 l3 ±0,02 l1 K
Z ap max SW M 52 862 ...
mm mm mm mm mm mm mm mm Nm £8 06 10.0 7.8 15 24.4 0,16 4 7.5 6 5 59.96 52862080
10 08 12.5 9.8 18 31.9 0,2 4 9.4 8 12,5 62.54 5286210012 10 15.0 11.8 22 36.1 0,24 4 11.3 10 15 84.84 5286212016 12 20.0 15.8 28 45.3 0,32 5 15.0 13 20 128.29 5286216020 16 25.0 19.8 35 57.2 0,4 6 18.8 16 25 175.19 52862200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 275● ○ ● ●
Solid Carbide Finishing Cutter, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
Ød1
l1
Ød3
KLG
Ti 1100
PG V1Article no.
d1
KLG l2 d3 l3 ±0,02 l1 Z
ap max SW M 52 863 ...mm mm mm mm mm mm mm Nm £
8 06 10.0 7.8 15 24.4 6 7.5 6 5 53.52 5286308010 08 12.5 9.8 18 31.9 6 9.4 8 12,5 60.54 5286310012 10 15.0 11.8 22 36.1 6 11.3 10 15 75.77 5286312016 12 20.0 15.8 28 45.3 6 15.0 13 20 118.12 5286316020 16 25.0 19.8 35 57.2 6 18.8 16 25 163.31 52863200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 276● ○ ● ●
Applies to both heads: - A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
13
toolingcenter.com 13 / 25
Solid Carbide High Feed Cutter, Factory Standard - KLG = Coupling Size - M = Torque Moment - Ø d1 tapers by 0.2 mm
l2
l3
r
Ød1
l1Ød3
KLG
Ød0
Ti 1100
PG V1Article no.
d1
KLG l2 d0 d3 l3 ±0,02 l1 r
Z ap max SW M 52 864 ...
mm mm mm mm mm mm mm mm mm Nm £8 06 6.0 4 7.8 11 20.4 0.4 6 0.4 6 5 52.35 52864080
10 08 7.5 5 9.8 13 26.9 0.5 6 0.5 8 12,5 58.71 5286410012 10 9.0 6 11.8 16 30.1 0.6 6 0.6 10 15 74.58 5286412016 12 12.0 8 15.8 20 37.3 0.8 6 0.8 13 20 107.08 5286416020 16 15.0 10 19.8 25 47.2 1.0 6 1.0 16 25 138.49 52864200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 277● ○ ● ○
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius contour: ± 0,02 mm - KLG = Coupling Size - M = Torque Moment
l2
l3
Ød1
l1Ød3
KLG
Ti 1100
PG V1Article no.
d1
KLG l2 d3 l3 ±0,02 l1 Z
ap max SW M 52 866 ...mm mm mm mm mm mm mm Nm £10 08 7.5 9.8 13 26.9 4 5.6 8 12,5 60.86 5286610012 10 9.0 11.8 16 30.1 4 6.8 10 15 75.98 5286612016 12 12.0 15.8 20 37.3 4 9.0 13 20 114.17 5286616020 16 15.0 19.8 25 47.2 4 11.3 16 25 140.81 52866200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 278+279● ○ ● ○
Applies to both heads: - A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
13 / 26 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Radius contour: ± 0,02 mm - KLG = Coupling Size - M = Torque Moment
l2
l3
rØd1
l1Ød3
KLG
Ti 1100
PG V1Article no.
d1
KLG l2 d3 l3 ±0,02 l1 r
Z ap max SW M 52 865 ...
mm mm mm mm mm mm mm mm Nm £8 06 6.0 7.8 11 20.4 1.0 4 4.5 6 5 48.18 528650818 06 6.0 7.8 11 20.4 2.0 4 4.5 6 5 48.18 5286508210 08 7.5 9.8 13 26.9 1.5 4 5.6 8 12,5 54.75 5286510110 08 7.5 9.8 13 26.9 3.0 4 5.6 8 12,5 54.75 5286510312 10 9.0 11.8 16 30.1 1.5 4 6.8 10 15 68.58 5286512112 10 9.0 11.8 16 30.1 4.0 4 6.8 10 15 68.58 5286512416 12 12.0 15.8 20 37.3 2.0 4 9.0 13 20 101.73 5286516216 12 12.0 15.8 20 37.3 5.0 4 9.0 13 20 101.73 5286516520 16 15.0 19.8 25 47.2 2.0 4 11.3 16 25 138.22 5286520220 16 15.0 19.8 25 47.2 6.0 4 11.3 16 25 138.22 52865206
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 278+279● ○ ● ○
- A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
toolingcenter.com 13 / 27
13
Solid Carbide Deburring Cutter, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
Ød1
l1
KLG
Ød0
Ød3
45°
Ti 1050
PG V1Article no.
d1
KLG l2 d0 d3 l3 ±0,02 l1 Z
SW M 52 867 ...mm mm mm mm mm mm mm Nm £10 08 7.5 0.0 9.8 13 26.9 4 8 12,5 49.39 5286710012 10 9.0 0.0 11.8 16 30.1 4 10 15 64.05 5286712016 12 12.0 6.4 15.8 20 37.3 6 13 20 85.17 5286716020 16 15.0 8.0 19.8 25 47.2 6 16 25 112.35 52867200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 280● ● ● ●
Solid Carbide Deburring Cutter, Factory Standard - KLG = Coupling Size - M = Torque Moment
l2
l3
l1
KLG
Ød1
Ød0
Ød3
90
°
Ti 1100
PG V1Article no.
d1
KLG l2 d0 d3 l3 ±0,02 l1 Z
SW M 52 868 ...mm mm mm mm mm mm mm Nm £10 06 4.8 7.5 8 11 20.4 6 6 15 54.75 5286810012 08 5.5 9.0 10 13 26.9 6 8 12,5 68.58 5286812016 10 8.0 12.0 12 16 30.1 6 10 20 95.68 5286816020 12 9.5 15.0 16 20 37.3 6 13 25 122.20 52868200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 280● ● ● ●
Applies to both heads: - A torque wrench should be used when mounting coupling sizes 06 and 08. It is recommended to use one for all sizes - In unstable applications, the cutting data should be reduced.
Solid Carbide milling cutters
13 / 28 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank blank
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 842 ... 52 841 ... 52 848 ...
mm mm mm mm mm mm mm £ £ £0.20 0.4 38 3 2 70.98 528429200.25 0.5 38 3 2 62.53 528429250.30 1.0 38 3 2 40.26 528429300.35 1.0 38 3 2 40.26 528429350.40 1.0 38 3 2 32.36 528429400.50 1.5 38 3 2 29.41 528429500.60 1.5 38 3 2 29.41 528429600.70 2.0 38 3 2 29.41 528429700.80 2.0 38 3 2 29.41 528429800.90 2.5 38 3 2 29.41 528429901.00 3.0 38 3 2 29.41 528420101.00 4.0 0.90 6 22 58 6 2 45.20 528480101.10 3.0 38 3 2 29.41 528420111.20 4.0 38 3 2 29.41 528420121.30 4.0 38 3 2 30.94 528420131.40 4.0 38 3 2 30.94 528420141.50 3.0 1.40 6 54 6 2 39.06 528420151.50 3.0 1.40 6 18 54 6 2 39.06 528410151.50 4.0 38 3 2 30.94 528429151.50 6.0 1.40 8 22 58 6 2 45.20 528480151.60 4.0 38 3 2 32.69 528420161.80 5.0 38 3 2 32.69 528420182.00 4.0 1.90 8 18 54 6 2 39.06 528410202.00 4.0 1.90 8 54 6 2 39.06 528420202.00 7.0 1.90 10 22 58 6 2 45.20 528480202.50 4.0 2.40 8 18 54 6 2 39.06 528410252.50 6.0 38 3 2 30.94 528420252.80 4.0 2.70 9 18 54 6 2 45.20 528410282.80 4.0 2.70 9 54 6 2 45.20 528420282.80 7.0 2.70 12 22 58 6 2 46.73 528480283.00 6.0 2.90 9 18 54 6 2 39.06 528410303.00 6.0 2.90 9 54 6 2 39.06 528420303.00 10.0 2.90 14 22 58 6 2 45.20 528480303.50 6.0 3.30 9 18 54 6 2 39.06 528410353.80 7.0 3.60 12 18 54 6 2 45.20 528410383.80 7.0 3.60 12 54 6 2 45.20 528420383.80 10.0 3.60 18 22 58 6 2 46.73 528480384.00 7.0 3.80 12 18 54 6 2 39.06 528410404.00 7.0 3.80 12 54 6 2 39.06 528420404.00 13.0 3.80 18 22 58 6 2 45.20 528480404.50 7.0 4.30 12 18 54 6 2 39.06 528410454.80 8.0 4.60 16 18 54 6 2 45.20 528410484.80 8.0 4.60 16 54 6 2 45.20 528420484.80 13.0 4.60 18 22 58 6 2 46.73 528480485.00 8.0 4.80 16 18 54 6 2 39.06 528410505.00 8.0 4.80 16 54 6 2 39.06 528420505.00 15.0 4.80 18 22 58 6 2 45.20 528480505.50 8.0 5.30 16 18 54 6 2 39.06 528410555.75 10.0 5.55 16 18 54 6 2 45.20 528410575.75 10.0 5.55 16 54 6 2 45.20 528420575.75 15.0 5.55 18 22 58 6 2 47.72 528480576.00 10.0 5.80 16 18 54 6 2 39.06 528410606.00 10.0 5.80 16 54 6 2 39.06 528420606.00 16.0 5.80 20 22 58 6 2 45.20 528480606.75 10.0 6.45 16 23 59 8 2 51.35 528410676.75 10.0 6.45 16 59 8 2 51.35 52842067
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 29
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank blank
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 842 ... 52 841 ... 52 848 ...
mm mm mm mm mm mm mm £ £ £6.75 16.0 6.45 23 34 70 8 2 58.03 528480677.00 12.0 6.70 18 23 59 8 2 50.36 528410707.00 16.0 6.70 23 34 70 8 2 51.23 528480707.75 12.0 7.45 18 23 59 8 2 50.90 528410777.75 12.0 7.45 18 59 8 2 50.90 528420777.75 16.0 7.45 23 34 70 8 2 54.20 528480778.00 12.0 7.70 20 23 59 8 2 43.66 528410808.00 12.0 7.70 20 59 8 2 43.66 528420808.00 22.0 7.70 25 34 70 8 2 50.57 528480808.70 12.0 8.40 20 27 67 10 2 84.25 528410878.70 12.0 8.40 22 67 10 2 84.25 528420879.00 13.0 8.70 22 27 67 10 2 81.50 528410909.00 22.0 8.70 28 33 73 10 2 90.72 528480909.70 13.0 9.40 22 27 67 10 2 82.28 528410979.70 13.0 9.40 22 67 10 2 82.28 528420979.70 22.0 9.40 28 33 73 10 2 92.59 5284809710.00 13.0 9.70 24 27 67 10 2 68.12 5284110010.00 13.0 9.70 24 67 10 2 68.12 5284210010.00 25.0 9.70 30 33 73 10 2 88.64 5284810011.00 25.0 10.60 32 39 84 12 2 123.19 5284811011.70 16.0 11.30 24 28 73 12 2 117.38 5284111711.70 16.0 11.30 24 73 12 2 117.38 5284211711.70 25.0 11.30 32 39 84 12 2 124.73 5284811712.00 16.0 11.60 26 28 73 12 2 95.22 5284112012.00 16.0 11.60 26 73 12 2 95.22 5284212012.00 26.0 11.60 35 39 84 12 2 119.46 5284812013.70 16.0 13.30 26 30 75 14 2 158.52 5284113713.70 16.0 13.30 26 75 14 2 158.52 5284213713.70 26.0 13.30 35 39 84 14 2 163.56 5284813714.00 16.0 13.60 28 30 75 14 2 133.18 5284114014.00 16.0 13.60 28 75 14 2 133.18 5284214014.00 26.0 13.60 35 39 84 14 2 154.89 5284814015.70 20.0 15.20 30 35 83 16 2 181.77 5284115715.70 20.0 15.20 30 83 16 2 181.77 5284215716.00 20.0 15.50 32 35 83 16 2 144.69 5284116016.00 20.0 15.50 32 83 16 2 144.69 5284216016.00 30.0 15.50 40 45 93 16 2 188.36 5284816017.70 20.0 17.20 32 37 85 18 2 240.02 5284117717.70 20.0 17.20 32 85 18 2 240.02 5284217718.00 20.0 17.50 34 37 85 18 2 190.65 5284118018.00 20.0 17.50 34 85 18 2 190.65 5284218018.00 30.0 17.50 40 45 93 18 2 233.87 5284818019.70 25.0 19.20 38 43 93 20 2 293.33 5284119719.70 25.0 19.20 38 93 20 2 293.33 5284219720.00 25.0 19.50 40 43 93 20 2 244.63 5284120020.00 25.0 19.50 40 93 20 2 244.63 5284220020.00 40.0 19.50 50 54 104 20 2 302.00 52848200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
13 / 30 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 843 ... 52 844 ... 52 847 ... 52 849 ...
mm mm mm mm mm mm mm £ £ £ £0.20 0.4 38 3 2 77.45 528439200.25 0.5 38 3 2 69.23 528439250.30 1.0 38 3 2 46.84 528439300.35 1.0 38 3 2 46.84 528439350.40 1.0 38 3 2 38.84 528439400.50 1.5 38 3 2 35.87 528439500.60 1.5 38 3 2 35.87 528439600.70 2.0 38 3 2 35.87 528439700.80 2.0 38 3 2 35.87 528439800.90 2.5 38 3 2 35.87 528439901.00 3.0 38 3 2 35.87 528430101.00 4.0 0.90 6 22 58 6 2 52.55 52847010 52.55 528490101.10 3.0 38 3 2 35.87 528430111.20 4.0 38 3 2 35.87 528430121.30 4.0 38 3 2 37.52 528430131.40 4.0 38 3 2 37.52 528430141.50 3.0 1.40 6 18 54 6 2 47.95 52843015 47.95 528440151.50 4.0 38 3 2 37.52 528439151.50 6.0 1.40 8 22 58 6 2 52.55 52847015 52.55 528490151.60 4.0 38 3 2 39.17 528430161.80 5.0 38 3 2 39.17 528430182.00 4.0 1.90 8 18 54 6 2 47.95 52843020 47.95 528440202.00 5.0 38 3 2 39.17 528430212.00 7.0 1.90 10 22 58 6 2 52.55 52847020 52.55 528490202.50 4.0 2.40 8 18 54 6 2 47.95 52843025 47.95 528440252.50 6.0 38 3 2 37.52 528430262.80 4.0 2.70 9 18 54 6 2 53.97 52843028 53.97 528440282.80 7.0 2.70 12 22 58 6 2 54.96 52847028 54.96 528490283.00 6.0 2.90 9 18 54 6 2 47.95 52843030 47.95 528440303.00 6.0 38 3 2 39.17 528430313.00 10.0 2.90 14 22 58 6 2 52.55 52847030 52.55 528490303.50 6.0 3.30 9 18 54 6 2 47.95 52843035 47.95 528440353.80 7.0 3.60 12 18 54 6 2 53.97 52843038 53.97 528440383.80 10.0 3.60 18 22 58 6 2 54.96 52847038 54.96 528490384.00 7.0 3.80 12 18 54 6 2 47.95 52843040 47.95 528440404.00 13.0 3.80 18 22 58 6 2 52.55 52847040 52.55 528490404.50 7.0 4.30 12 18 54 6 2 47.95 52843045 47.95 528440454.80 8.0 4.60 16 18 54 6 2 53.97 52843048 53.97 528440484.80 13.0 4.60 18 22 58 6 2 54.96 52847048 54.96 528490485.00 8.0 4.80 16 18 54 6 2 47.95 52843050 47.95 528440505.00 15.0 4.80 18 22 58 6 2 52.55 52847050 52.55 528490505.50 8.0 5.30 16 18 54 6 2 47.95 52843055 47.95 528440555.75 10.0 5.55 16 18 54 6 2 53.97 52843057 53.97 528440575.75 15.0 5.55 18 22 58 6 2 55.95 52847057 55.95 528490576.00 10.0 5.80 16 18 54 6 2 47.95 52843060 47.95 528440606.00 16.0 5.80 20 22 58 6 2 52.55 52847060 52.55 528490606.75 16.0 6.45 23 34 70 8 2 71.52 52847067 71.52 528490676.75 10.0 6.45 16 23 59 8 2 65.05 528440677.00 12.0 6.70 18 23 59 8 2 61.87 52843070 61.87 528440707.00 16.0 6.70 23 34 70 8 2 64.61 52847070 64.61 528490707.75 16.0 7.45 23 34 70 8 2 67.69 52847077 67.69 528490777.75 12.0 7.45 18 23 59 8 2 62.42 52843077 62.42 528440778.00 12.0 7.70 20 23 59 8 2 56.06 52843080 56.06 52844080
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 31
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 843 ... 52 844 ... 52 847 ... 52 849 ...
mm mm mm mm mm mm mm £ £ £ £8.00 22.0 7.70 25 34 70 8 2 64.18 52847080 64.18 528490808.70 12.0 8.40 20 27 67 10 2 100.37 528440879.00 13.0 8.70 22 27 67 10 2 97.09 52843090 97.09 528440909.00 22.0 8.70 28 33 73 10 2 109.48 52847090 109.48 528490909.70 13.0 9.40 22 27 67 10 2 98.08 52843097 98.08 528440979.70 22.0 9.40 28 33 73 10 2 111.34 52847097 111.34 52849097
10.00 13.0 9.70 24 27 67 10 2 85.79 52843100 85.79 5284410010.00 25.0 9.70 30 33 73 10 2 107.73 52847100 107.73 5284910011.00 25.0 10.60 32 39 84 12 2 148.09 52847110 148.09 5284911011.70 16.0 11.30 24 28 73 12 2 140.31 52843117 140.31 5284411711.70 25.0 11.30 32 39 84 12 2 149.63 52847117 149.63 5284911712.00 26.0 11.60 35 39 84 12 2 144.48 52847120 144.48 5284912012.00 16.0 11.60 26 28 73 12 2 118.37 52843120 118.37 5284412013.70 16.0 13.30 26 30 75 14 2 185.50 5284413713.70 26.0 13.30 35 39 84 14 2 190.87 52847137 190.87 5284913714.00 26.0 13.60 35 39 84 14 2 182.65 52847140 182.65 5284914014.00 16.0 13.60 28 30 75 14 2 160.15 52843140 160.15 5284414015.70 20.0 15.20 30 35 83 16 2 214.13 5284415716.00 20.0 15.50 32 35 83 16 2 178.37 52843160 178.37 5284416016.00 30.0 15.50 40 45 93 16 2 229.48 52847160 229.48 5284916017.70 20.0 17.20 32 37 85 18 2 277.42 5284417718.00 20.0 17.50 34 37 85 18 2 228.06 52843180 228.06 5284418018.00 30.0 17.50 40 45 93 18 2 276.43 52847180 276.43 5284918019.70 25.0 19.20 38 43 93 20 2 335.12 5284419720.00 25.0 19.50 40 43 93 20 2 287.30 52843200 287.30 5284420020.00 40.0 19.50 50 54 104 20 2 355.20 52847200 355.20 52849200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 32 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 839 ... 52 840 ... 52 845 ... 52 846 ... 52 850 ... 52 851 ...mm mm mm mm mm mm mm mm £ £ £ £ £ £2.00 4 1.90 8 18 54 6 0,04 2 47.95 52839020 47.95 528400202.00 5 10 38 3 0,04 2 39.17 528390212.00 6 22 38 2 0,04 2 44.32 528450202.00 7 1.90 10 22 58 6 0,04 2 52.55 528460202.50 4 2.40 8 18 54 6 0,07 2 47.95 52839025 47.95 528400252.50 6 10 38 3 0,07 2 37.52 528390262.80 4 2.70 9 18 54 6 0,07 2 53.97 52839028 53.97 528400282.80 7 22 38 3 0,07 2 48.71 528450282.80 7 2.70 12 22 58 6 0,07 2 54.96 528460283.00 6 2.90 9 18 54 6 0,07 2 47.95 52839030 47.95 528400303.00 6 10 38 3 0,07 2 39.17 528390313.00 7 22 38 3 0,07 2 44.32 528450303.00 10 2.90 14 22 58 6 0,07 2 52.55 528460303.00 20 2.90 24 60 3 0,07 2 70.65 528500303.50 6 3.30 9 18 54 6 0,07 2 47.95 52839035 47.95 528400353.80 7 3.60 12 18 54 6 0,07 2 53.97 52839038 53.97 528400383.80 8 3.60 20 22 50 4 0,07 2 49.91 528450383.80 10 3.60 18 22 58 6 0,07 2 54.96 528460384.00 7 3.80 12 18 54 6 0,07 2 47.95 52839040 47.95 528400404.00 8 3.80 20 22 50 4 0,07 2 45.42 528450404.00 13 3.80 18 22 58 6 0,07 2 52.55 528460404.00 30 3.80 35 75 4 0,07 2 78.00 528500404.50 7 4.30 12 18 54 6 0,12 2 47.95 52839045 47.95 528400454.80 8 4.60 16 18 54 6 0,12 2 53.97 52839048 53.97 528400484.80 10 4.60 20 22 50 5 0,12 2 52.55 528450484.80 13 4.60 18 22 58 6 0,12 2 54.96 528460485.00 8 4.80 16 18 54 6 0,12 2 47.95 52839050 47.95 528400505.00 10 4.80 20 22 50 5 0,12 2 47.72 528450505.00 15 4.80 18 22 58 6 0,12 2 52.55 528460505.00 30 4.80 35 75 5 0,12 2 83.48 528500505.50 8 5.30 16 18 54 6 0,12 2 47.95 52839055 47.95 528400555.75 10 5.55 16 18 54 6 0,12 2 53.97 52839057 53.97 528400575.75 15 5.55 18 22 58 6 0,12 2 55.95 52845057 55.95 528460576.00 10 5.80 16 18 54 6 0,12 2 47.95 52839060 47.95 528400606.00 16 5.80 20 22 58 6 0,12 2 52.55 52845060 52.55 528460606.00 40 5.80 60 64 100 6 0,12 2 96.32 52850060 96.32 528510606.75 16 6.45 23 34 70 8 0,12 2 71.52 52845067 71.52 528460677.00 12 6.70 18 23 59 8 0,12 2 61.87 52839070 61.87 528400707.00 16 6.70 23 34 70 8 0,12 2 64.61 52845070 64.61 528460707.75 12 7.45 18 23 59 8 0,12 2 62.42 52839077 62.42 528400777.75 16 7.45 23 34 70 8 0,12 2 67.69 52845077 67.69 528460778.00 12 7.70 20 23 59 8 0,12 2 56.06 52839080 56.06 528400808.00 22 7.70 25 34 70 8 0,12 2 64.18 52845080 64.18 528460808.00 40 7.70 60 64 100 8 0,12 2 111.34 52850080 111.34 528510809.00 13 8.70 22 27 67 10 0,2 2 97.09 52839090 97.09 528400909.00 22 8.70 28 33 73 10 0,2 2 109.48 52845090 109.48 528460909.70 13 9.40 22 27 67 10 0,2 2 98.08 52839097 98.08 528400979.70 22 9.40 28 33 73 10 0,2 2 111.34 52845097 111.34 5284609710.00 13 9.70 24 27 67 10 0,2 2 85.79 52839100 85.79 5284010010.00 25 9.70 30 33 73 10 0,2 2 107.73 52845100 107.73 5284610010.00 40 9.70 55 60 100 10 0,2 2 152.04 52850100 152.04 5285110011.00 25 10.60 32 39 84 12 0,2 2 148.09 52845110 148.09 5284611011.70 16 11.30 24 28 73 12 0,2 2 140.31 52839117 140.31 52840117
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 33
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 839 ... 52 840 ... 52 845 ... 52 846 ... 52 850 ... 52 851 ...mm mm mm mm mm mm mm mm £ £ £ £ £ £
11.70 25 11.30 32 39 84 12 0,2 2 149.63 52845117 149.63 5284611712.00 16 11.60 26 28 73 12 0,2 2 118.37 52839120 118.37 5284012012.00 26 11.60 35 39 84 12 0,2 2 144.48 52845120 144.48 5284612012.00 45 11.60 50 55 100 12 0,2 2 205.13 52850120 205.13 5285112013.70 26 13.30 35 39 84 14 0,2 2 190.87 52845137 190.87 5284613714.00 16 13.60 28 30 75 14 0,2 2 160.15 52839140 160.15 5284014014.00 26 13.60 35 39 84 14 0,2 2 182.65 52845140 182.65 5284614016.00 20 15.50 32 35 83 16 0,2 2 178.37 52839160 178.37 5284016016.00 30 15.50 40 45 93 16 0,2 2 229.48 52845160 229.48 5284616016.00 65 15.50 90 102 150 16 0,2 2 463.90 52850160 463.90 5285116018.00 20 17.50 34 37 85 18 0,2 2 228.06 52839180 228.06 5284018018.00 30 17.50 40 45 93 18 0,2 2 276.43 52845180 276.43 5284618020.00 25 19.50 40 43 93 20 0,3 2 287.30 52839200 287.30 5284020020.00 40 19.50 50 54 104 20 0,3 2 355.20 52845200 355.20 5284620020.00 65 19.50 90 100 150 20 0,3 2 574.80 52850200 574.80 52851200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 34 toolingcenter.com
Solid carbide slot milling cutter, DIN 6527 / factory standard
l2
Ød2
Ød1
l1
l3
Ød3
K
DIAMOND DIAMOND DIAMOND
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1
Tol. l2 d3 l3 l1 d2 h6 K
Z 52 760 ... 52 761 ... 52 762 ...mm mm mm mm mm mm mm £ £ £
2 e8 3 50 6 2 184.37 527600202 h10 8 1.8 31 60 2 0,04 2 137.39 527620203 e8 4 50 6 2 184.37 527600303 h10 12 2.8 41 70 3 0,07 2 149.73 527620304 e8 5 54 6 2 184.37 527600404 h10 15 3.8 51 80 4 0,07 2 185.07 527620405 e8 6 54 6 2 184.37 527600505 h10 20 4.8 71 100 5 0,12 2 216.05 527620506 e8 10 57 6 0,12 2 179.27 527610606 h10 20 5.8 63 100 6 0,12 2 242.14 527620608 e8 16 63 8 0,12 2 251.99 527610808 h10 20 7.8 83 120 8 0,12 2 333.49 5276208010 e8 19 72 10 0,2 2 329.94 5276110010 h10 25 9.8 99 140 10 0,2 2 429.82 5276210012 e8 22 83 12 0,2 2 413.09 5276112012 h10 25 11.8 104 150 12 0,2 2 562.09 52762120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 35
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank blank blank
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 813 ... 52 814 ... 52 817 ... 52 818 ...
mm mm mm mm mm mm mm £ £ £ £2 4 1.9 8 32 2 2 29.18 528130212 7 1.9 10 32 2 2 32.03 528170213 6 2.9 9 32 3 2 30.07 528130313 10 2.9 14 38 3 2 33.57 528170314 7 3.8 12 36 4 2 31.60 528130414 13 3.8 18 40 4 2 35.33 528170415 8 4.8 16 18 54 6 2 33.90 52813050 33.90 528140505 15 4.8 18 22 58 6 2 39.06 52817050 39.06 528180506 10 5.8 16 18 54 6 2 35.55 52813060 35.55 528140606 16 5.8 20 22 58 6 2 39.82 52817060 39.82 528180607 12 6.7 18 23 59 8 2 43.99 52813070 43.99 528140707 20 6.7 23 34 70 8 2 50.03 52817070 50.03 528180708 12 7.7 20 23 59 8 2 42.13 52813080 42.13 528140808 22 7.7 25 34 70 8 2 60.01 52817080 60.01 528180809 14 8.7 22 27 67 10 2 70.53 52813090 70.53 528140909 22 8.7 28 33 73 10 2 88.74 52817090 88.74 5281809010 14 9.7 24 27 67 10 2 66.70 52813100 66.70 5281410010 25 9.7 30 33 73 10 2 85.56 52817100 85.56 5281810012 16 11.6 26 28 73 12 2 90.06 52813120 90.06 5281412012 28 11.6 35 39 84 12 2 110.68 52817120 110.68 5281812014 18 13.6 28 30 75 14 2 128.35 52813140 128.35 5281414014 30 13.6 35 39 84 14 2 149.08 52817140 149.08 5281814016 20 15.5 32 35 83 16 2 142.06 52813160 142.06 5281416016 35 15.5 40 45 93 16 2 181.33 52817160 181.33 5281816018 20 17.5 34 35 83 18 2 189.66 52813180 189.66 5281418018 35 17.5 40 52 100 18 2 216.32 52817180 216.32 5281818020 25 19.5 40 43 93 20 2 246.71 52813200 246.71 5281420020 40 19.5 50 54 104 20 2 290.37 52817200 290.37 52818200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
13 / 36 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 811 ... 52 812 ... 52 815 ... 52 816 ...mm mm mm mm mm mm mm mm £ £ £ £
2 4 1.9 8 18 54 6 0,04 2 40.71 52811020 40.71 528120202 4 1.9 8 32 2 0,07 2 35.87 528110212 7 1.9 10 32 2 0,07 2 38.73 528150212 7 1.9 10 22 58 6 0,04 2 45.75 52815020 45.75 528160203 6 2.9 9 18 54 6 0,07 2 40.71 52811030 40.71 528120303 6 2.9 9 32 3 0,04 2 36.75 528110313 10 2.9 14 38 3 0,04 2 40.38 528150313 10 2.9 14 22 58 6 0,07 2 45.75 52815030 45.75 528160304 7 3.8 12 18 54 6 0,07 2 40.71 52811040 40.71 528120404 7 3.8 12 36 4 0,07 2 38.29 528110414 13 3.8 18 40 4 0,07 2 42.13 528150414 13 3.8 18 22 58 6 0,07 2 45.75 52815040 45.75 528160405 8 4.8 16 18 54 6 0,12 2 40.71 52811050 40.71 528120505 15 4.8 18 22 58 6 0,12 2 45.75 52815050 45.75 528160506 10 5.8 16 18 54 6 0,12 2 42.34 52811060 42.34 528120606 16 5.8 20 22 58 6 0,12 2 46.63 52815060 46.63 528160607 12 6.7 18 23 59 8 0,12 2 53.10 52811070 53.10 528120707 20 6.7 23 34 70 8 0,12 2 59.24 52815070 59.24 528160708 12 7.7 20 23 59 8 0,12 2 51.35 52811080 51.35 528120808 22 7.7 25 34 70 8 0,12 2 69.23 52815080 69.23 528160809 14 8.7 22 27 67 10 0,2 2 82.94 52811090 82.94 528120909 22 8.7 28 33 73 10 0,2 2 101.25 52815090 101.25 5281609010 14 9.7 24 27 67 10 0,2 2 79.21 52811100 79.21 5281210010 25 9.7 30 33 73 10 0,2 2 97.96 52815100 97.96 5281610012 16 11.6 26 28 73 12 0,2 2 104.43 52811120 104.43 5281212012 28 11.6 35 39 84 12 0,2 2 125.17 52815120 125.17 5281612014 18 13.6 28 30 75 14 0,2 2 145.02 52811140 145.02 5281214014 30 13.6 35 39 84 14 0,2 2 165.76 52815140 165.76 5281614016 20 15.5 32 35 83 16 0,2 2 162.90 52811160 162.90 5281216016 35 15.5 40 45 93 16 0,2 2 202.40 52815160 202.40 5281616018 20 17.5 34 35 83 18 0,2 2 228.06 52811180 228.06 5281218018 35 17.5 40 52 100 18 0,2 2 254.82 52815180 254.82 5281618020 25 19.5 40 43 93 20 0,3 2 285.32 52811200 285.32 5281220020 40 19.5 50 54 104 20 0,3 2 329.20 52815200 329.20 52816200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13
toolingcenter.com 13 / 37
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank
PG V1 PG V1Article no. Article no.
d1 e8 l2 l5 d3 l3 l1 d2 h6 Z 52 823 ... 52 828 ...
mm mm mm mm mm mm mm £ £1.00 4 22 1.00 58 6 3 42.13 528280101.50 3 18 1.40 6 54 6 3 38.61 528230151.50 6 22 1.50 58 6 3 42.13 528280152.00 4 18 1.90 8 54 6 3 38.61 528230202.00 7 22 2.00 58 6 3 42.13 528280202.50 4 18 2.40 8 54 6 3 38.51 528230252.80 6 18 2.70 9 54 6 3 45.53 528230283.00 6 18 2.90 9 54 6 3 38.61 528230303.00 10 22 2.90 14 58 6 3 42.13 528280303.50 6 18 3.30 9 54 6 3 38.51 528230353.80 6 18 3.60 12 54 6 3 45.53 528230384.00 7 18 3.80 12 54 6 3 38.61 528230404.00 13 22 3.80 17 58 6 3 42.13 528280404.50 7 18 4.30 12 54 6 3 38.51 528230454.80 8 18 4.60 16 54 6 3 45.53 528230485.00 8 18 4.80 16 54 6 3 38.61 528230505.00 15 22 4.80 19 58 6 3 42.13 528280505.50 8 18 5.30 16 54 6 3 38.51 528230555.75 8 18 5.55 16 54 6 3 45.75 528230576.00 10 18 5.80 16 54 6 3 38.61 528230606.00 16 22 5.80 20 58 6 3 42.13 528280607.00 19 28 6.70 23 64 8 3 53.21 528280707.75 10 22 7.45 18 58 8 3 51.02 528230778.00 12 23 7.70 20 59 8 3 43.12 528230808.00 22 34 7.70 26 70 8 3 48.16 528280809.00 23 32 8.70 28 72 10 3 95.44 528280909.70 12 19 9.40 18 59 10 3 80.53 52823097
10.00 13 27 9.70 24 67 10 3 68.12 5282310010.00 25 33 9.70 31 73 10 3 86.45 5282810011.00 25 38 10.60 34 83 12 3 128.89 5282811011.70 16 22 11.30 20 67 12 3 111.89 5282311712.00 16 28 11.60 26 73 12 3 94.56 5282312012.00 26 39 11.60 37 84 12 3 116.61 5282812014.00 16 30 13.60 28 75 14 3 132.85 5282314014.00 26 39 13.60 37 84 14 3 149.96 5282814016.00 20 35 15.50 32 83 16 3 144.69 5282316016.00 32 45 15.50 43 93 16 3 183.97 5282816018.00 20 37 17.50 34 85 18 3 193.39 5282318018.00 32 45 17.50 43 93 18 3 226.30 5282818020.00 25 43 19.50 40 93 20 3 244.63 5282320020.00 40 54 19.50 52 104 20 3 292.34 52828200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
13 / 38 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 821 ... 52 822 ... 52 826 ... 52 827 ...
mm mm mm mm mm mm mm £ £ £ £1.00 4 1.00 22 58 6 3 52.55 52826010 52.55 528270101.50 3 1.40 6 18 54 6 3 47.95 52821015 47.95 528220151.50 3 1.40 6 38 3 3 44.76 528210161.50 6 1.50 22 58 6 3 52.55 52826015 52.55 528270152.00 4 1.90 8 18 54 6 3 47.95 52821020 47.95 528220202.00 4 1.90 8 38 3 3 44.76 528210212.00 7 2.00 22 58 6 3 52.55 52826020 52.55 528270202.50 4 2.40 8 18 54 6 3 47.95 52821025 47.95 528220252.50 4 2.40 8 38 3 3 44.76 528210262.80 6 2.70 9 18 54 6 3 54.85 52821028 54.85 528220283.00 6 2.90 9 18 54 6 3 47.95 52821030 47.95 528220303.00 6 2.90 9 38 3 3 44.76 528210313.00 10 2.90 14 22 58 6 3 52.55 52826030 52.55 528270303.50 6 3.30 9 18 54 6 3 47.95 52821035 47.95 528220353.80 6 3.60 12 18 54 6 3 54.85 52821038 54.85 528220384.00 7 3.80 12 18 54 6 3 47.95 52821040 47.95 528220404.00 13 3.80 17 22 58 6 3 52.55 52826040 52.55 528270404.50 7 4.30 12 18 54 6 3 47.95 52821045 47.95 528220454.80 8 4.60 16 18 54 6 3 54.85 52821048 54.85 528220485.00 8 4.80 16 18 54 6 3 47.95 52821050 47.95 528220505.00 15 4.80 19 22 58 6 3 52.55 52826050 52.55 528270505.50 8 5.30 16 18 54 6 3 47.95 52821055 47.95 528220555.75 8 5.55 16 18 54 6 3 55.18 52821057 55.18 528220576.00 10 5.80 16 18 54 6 3 47.95 52821060 47.95 528220606.00 16 5.80 20 22 58 6 3 52.55 52826060 52.55 528270607.00 19 6.70 23 28 64 8 3 70.20 52826070 70.20 528270707.75 10 7.45 18 22 58 8 3 64.18 52821077 64.18 528220778.00 12 7.70 20 23 59 8 3 56.06 52821080 56.06 528220808.00 22 7.70 26 34 70 8 3 64.18 52826080 64.18 528270809.00 23 8.70 28 32 72 10 3 117.92 52826090 117.92 528270909.70 12 9.40 18 19 59 10 3 98.08 52821097 98.08 52822097
10.00 13 9.70 24 27 67 10 3 85.79 52821100 85.79 5282210010.00 25 9.70 31 33 73 10 3 107.73 52826100 107.73 5282710011.00 25 10.60 34 38 83 12 3 158.19 52826110 158.19 5282711011.70 16 11.30 20 22 67 12 3 135.48 52821117 135.48 5282211712.00 16 11.60 26 28 73 12 3 118.25 52821120 118.25 5282212012.00 26 11.60 37 39 84 12 3 144.48 52826120 144.48 5282712014.00 16 13.60 28 30 75 14 3 160.15 52821140 160.15 5282214014.00 26 13.60 37 39 84 14 3 182.87 52826140 182.87 5282714016.00 20 15.50 32 35 83 16 3 178.37 52821160 178.37 5282216016.00 32 15.50 43 45 93 16 3 229.48 52826160 229.48 5282716018.00 20 17.50 34 37 85 18 3 228.06 52821180 228.06 5282218018.00 32 17.50 43 45 93 18 3 276.43 52826180 276.43 5282718020.00 25 19.50 40 43 93 20 3 287.30 52821200 287.30 5282220020.00 40 19.50 52 54 104 20 3 355.20 52826200 355.20 52827200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 39
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 819 ... 52 820 ... 52 824 ... 52 825 ...mm mm mm mm mm mm mm mm £ £ £ £1.00 4 1.00 22 58 6 3 52.55 52824010 52.55 528250101.50 3 1.40 6 18 54 6 3 47.95 52819015 47.95 528200151.50 3 1.40 6 38 3 3 44.76 528190161.50 6 1.50 22 58 6 3 52.55 52824015 52.55 528250152.00 4 1.90 8 18 54 6 0,04 3 47.95 52819020 47.95 528200202.00 4 1.90 8 38 3 0,04 3 44.76 528190212.00 7 2.00 22 58 6 0,04 3 52.55 52824020 52.55 528250202.50 4 2.40 8 18 54 6 0,07 3 47.95 52819025 47.95 528200252.50 4 2.40 8 38 3 0,07 3 44.76 528190262.80 6 2.70 9 18 54 6 0,07 3 54.85 52819028 54.85 528200283.00 6 2.90 9 18 54 6 0,07 3 47.95 52819030 47.95 528200303.00 6 2.90 9 38 3 0,07 3 44.76 528190313.00 10 2.90 14 22 58 6 0,04 3 52.55 52824030 52.55 528250303.50 6 3.30 9 18 54 6 0,07 3 47.95 52819035 47.95 528200353.80 6 3.60 12 18 54 6 0,07 3 54.85 52819038 54.85 528200384.00 7 3.80 12 18 54 6 0,07 3 47.95 52819040 47.95 528200404.00 13 3.80 17 22 58 6 0,04 3 52.55 52824040 52.55 528250404.50 7 4.30 12 18 54 6 0,12 3 47.95 52819045 47.95 528200454.80 8 4.60 16 18 54 6 0,12 3 54.85 52819048 54.85 528200485.00 8 4.80 16 18 54 6 0,12 3 47.95 52819050 47.95 528200505.00 15 4.80 19 22 58 6 0,12 3 52.55 52824050 52.55 528250505.50 8 5.30 16 18 54 6 0,12 3 47.95 52819055 47.95 528200555.75 8 5.55 16 18 54 6 0,12 3 55.18 52819057 55.18 528200576.00 10 5.80 16 18 54 6 0,12 3 47.95 52819060 47.95 528200606.00 16 5.80 20 22 58 6 0,12 3 52.55 52824060 52.55 528250607.00 19 6.70 23 28 64 8 0,12 3 70.20 52824070 70.20 528250707.75 10 7.45 18 22 58 8 0,12 3 64.18 52819077 64.18 528200778.00 12 7.70 20 23 59 8 0,12 3 56.06 52819080 56.06 528200808.00 22 7.70 26 34 70 8 0,12 3 64.18 52824080 64.18 528250809.00 23 8.70 28 32 72 10 0,2 3 117.92 52824090 117.92 528250909.70 12 9.40 18 19 59 10 0,2 3 98.08 52819097 98.08 52820097
10.00 13 9.70 24 27 67 10 0,2 3 85.79 52819100 85.79 5282010010.00 25 9.70 31 33 73 10 0,2 3 107.73 52824100 107.73 5282510011.00 25 10.60 34 38 83 12 0,2 3 158.19 52824110 158.19 5282511011.70 16 11.30 20 22 67 12 0,2 3 135.48 52819117 135.48 5282011712.00 16 11.60 26 28 73 12 0,2 3 118.25 52819120 118.25 5282012012.00 26 11.60 37 39 84 12 0,2 3 144.48 52824120 144.48 5282512014.00 16 13.60 28 30 75 14 0,2 3 160.15 52819140 160.15 5282014014.00 26 13.60 37 39 84 14 0,2 3 182.87 52824140 182.87 5282514016.00 20 15.50 32 35 83 16 0,2 3 178.37 52819160 178.37 5282016016.00 32 15.50 43 45 93 16 0,2 3 229.48 52824160 229.48 5282516018.00 20 17.50 34 37 85 18 0,2 3 228.06 52819180 228.06 5282018018.00 32 17.50 43 45 93 18 0,2 3 276.43 52824180 276.43 5282518020.00 25 19.50 40 43 93 20 0,3 3 287.30 52819200 287.30 5282020020.00 40 19.50 52 54 104 20 0,3 3 355.20 52824200 355.20 52825200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 40 toolingcenter.com
Solid carbide throw-away milling cutter, factory standard - Shanks similar to DIN 6535 - Sets can be found on page 43
l2
Ød2
Ød1
l1
l5l3
blank
PG V1Article no.
d1 e8 l2 l3 l5 l1 d2 h6 Z 52 200 ...
mm mm mm mm mm mm £1.00 2 4.0 20 45 6 3 25.87 522000101.20 2 4.0 20 45 6 3 23.18 522000121.50 3 5.5 20 45 6 3 26.20 522000151.80 3 5.5 20 45 6 3 29.61 522000182.00 4 7.0 20 45 6 3 21.54 52200020 1)
2.50 4 7.0 20 45 6 3 25.03 52200025 1)
2.80 6 10.0 20 45 6 3 23.18 522000283.00 6 10.0 19 45 6 3 21.54 52200030 1)
3.50 6 10.0 19 45 6 3 25.03 52200035 1)
3.80 7 12.0 19 45 6 3 23.18 522000384.00 7 12.0 19 45 6 3 22.82 52200040 1)
4.50 7 12.0 19 45 6 3 25.03 52200045 1)
4.75 8 13.0 19 45 6 3 23.85 522000475.00 8 13.0 19 45 6 3 23.73 52200050 1)
5.50 8 12.0 19 45 6 3 26.58 52200055 1)
5.75 10 12.0 19 45 6 3 23.85 522000576.00 10 19 45 6 3 23.73 52200060 1)
6.75 10 26 55 8 3 33.22 522000677.00 12 26 55 8 3 32.03 522000707.75 12 26 55 8 3 33.22 522000778.00 13 26 55 8 3 34.18 522000808.70 14 28 55 10 3 46.79 522000879.00 14 28 55 10 3 45.45 522000909.70 16 27 55 10 3 46.79 5220009710.00 16 27 55 10 3 48.17 52200100
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
1) included in the set
Solid Carbide milling cutters
toolingcenter.com 13 / 41
13
Solid carbide throw-away milling cutter, factory standard - Shank similar to DIN 6535
l2
Ød2
Ød1
l1
l5l3
Ti 1000
PG V1Article no.
d1 e8 l2 l3 l5 l1 d2 h6 Z 52 201 ...
mm mm mm mm mm mm £1.00 2 4.0 20 45 6 3 28.24 522010101.20 2 4.0 20 45 6 3 28.52 522010121.50 3 5.5 20 45 6 3 28.24 522010151.80 3 5.5 20 45 6 3 32.48 522010182.00 4 7.0 20 45 6 3 24.69 522010202.50 4 7.0 20 45 6 3 31.66 522010252.80 6 10.0 20 45 6 3 28.52 522010283.00 6 10.0 19 45 6 3 28.84 522010303.50 6 10.0 19 45 6 3 28.24 522010353.80 7 12.0 19 45 6 3 28.52 522010384.00 7 12.0 19 45 6 3 24.92 522010404.50 7 12.0 19 45 6 3 28.24 522010454.75 8 13.0 19 45 6 3 28.98 522010475.00 8 13.0 19 45 6 3 26.31 522010505.50 8 12.0 19 45 6 3 28.52 522010555.75 10 12.0 19 45 6 3 28.98 522010576.00 10 19 45 6 3 26.31 522010606.75 10 26 55 8 3 43.66 522010677.00 12 26 55 8 3 41.79 522010707.75 12 26 55 8 3 43.66 522010778.00 13 26 55 8 3 47.11 522010808.70 14 28 55 10 3 58.43 522010879.00 14 28 55 10 3 57.31 522010909.70 16 27 55 10 3 58.43 5220109710.00 16 27 55 10 3 57.31 52201100
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 42 toolingcenter.com
Solid carbide throw-away milling cutter, factory standard - Shank similar to DIN 6535
l2
Ød2
Ød1
l1
l5
K
l3
blank
PG V1Article no.
d1 e8 l2 l3 l5 l1 d2 h6 K
Z 52 203 ...mm mm mm mm mm mm mm £1.0 2 4.0 20 45 6 0,02 3 22.35 522030101.5 3 5.0 20 45 6 0,03 3 22.35 522030152.0 4 6.0 20 45 6 0,03 3 19.21 522030202.5 4 6.0 20 45 6 0,03 3 22.35 522030253.0 6 9.0 19 45 6 0,03 3 19.21 522030303.5 6 9.5 19 45 6 0,03 3 22.35 522030354.0 7 10.5 19 45 6 0,04 3 20.65 522030404.5 7 10.5 19 45 6 0,04 3 22.35 522030455.0 8 11.5 19 45 6 0,04 3 20.84 522030505.5 8 12.0 19 45 6 0,04 3 23.18 522030556.0 10 19 45 6 0,04 3 20.84 522030608.0 13 26 55 8 0,05 3 30.50 52203080
10.0 16 27 55 10 0,05 3 42.95 52203100
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 43
13
Solid carbide throw-away milling cutter, factory standard - Shanks similar to DIN 6535 - Sets can be found on page 43
l2
Ød2
Ød1
l1
l5
K
l3
Ti 1000
PG V1Article no.
d1 e8 l2 l3 l5 l1 d2 h6 K
Z 52 204 ...mm mm mm mm mm mm mm £1.0 2 4.0 20 45 6 0,02 3 26.20 522040101.5 3 5.0 20 45 6 0,03 3 25.39 52204015 1)
2.0 4 6.0 20 45 6 0,03 3 23.73 52204020 1)
2.5 4 6.0 20 45 6 0,03 3 26.31 52204025 1)
3.0 6 9.0 19 45 6 0,03 3 23.73 52204030 1)
3.5 6 9.5 19 45 6 0,03 3 26.20 52204035 1)
4.0 7 10.5 19 45 6 0,04 3 23.73 52204040 1)
4.5 7 10.5 19 45 6 0,04 3 26.20 52204045 1)
5.0 8 11.5 19 45 6 0,04 3 24.92 52204050 1)
5.5 8 12.0 19 45 6 0,04 3 28.84 52204055 1)
6.0 10 19 45 6 0,04 3 25.85 52204060 1)
8.0 13 26 55 8 0,05 3 36.07 5220408010.0 16 27 55 10 0,05 3 48.76 52204100
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
1) included in the set
Solid carbide throw-away milling cutter set, factory standard Set Set52 200 999 52 204 999contents: contents:
1 x 52 200 020 1 x 52 204 0151 x 52 200 025 1 x 52 204 0201 x 52 200 030 1 x 52 204 0251 x 52 200 035 1 x 52 204 0301 x 52 200 040 1 x 52 204 0351 x 52 200 045 1 x 52 204 0401 x 52 200 050 1 x 52 204 0451 x 52 200 055 1 x 52 204 0501 x 52 200 060 1 x 52 204 055
1 x 52 204 060
blank Ti 1000
PG V1 PG V1Article no. Article no.52 200 ... 52 204 ...
£ £Set 202.04 52200999 253.77 52204999
Solid Carbide milling cutters
13 / 44 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 829 ... 52 830 ... 52 832 ... 52 833 ...mm mm mm mm mm mm mm mm £ £ £ £2.0 4 1.9 8 18 54 6 0,04 3 47.95 52829020 47.95 528300202.0 7 1.9 10 22 58 6 0,04 3 52.55 52832020 52.55 528330202.5 5 2.4 8 18 54 6 0,07 3 47.95 52829025 47.95 528300253.0 6 2.9 9 18 54 6 0,07 3 47.95 52829030 47.95 528300303.0 10 2.9 14 22 58 6 0,07 3 52.55 52832030 52.55 528330304.0 7 3.8 12 18 54 6 0,07 3 47.95 52829040 47.95 528300404.0 13 3.8 17 22 58 6 0,07 3 52.55 52832040 52.55 528330405.0 8 4.8 16 18 54 6 0,12 3 47.95 52829050 47.95 528300505.0 15 4.8 19 22 58 6 0,07 3 52.55 52832050 52.55 528330506.0 10 5.8 16 18 54 6 0,12 3 47.95 52829060 47.95 528300606.0 16 5.8 20 22 58 6 0,12 3 52.55 52832060 52.55 528330607.0 11 6.7 18 23 59 8 0,12 3 61.33 52829070 61.33 528300707.0 19 6.7 23 34 70 8 0,12 3 70.20 52832070 70.20 528330708.0 12 7.7 20 23 59 8 0,12 3 56.06 52829080 56.06 528300808.0 22 7.7 26 34 70 8 0,12 3 64.18 52832080 64.18 528330809.0 13 8.7 22 27 67 10 0,2 3 93.79 52829090 93.79 528300909.0 23 8.7 28 33 73 10 0,12 3 117.92 52832090 117.92 52833090
10.0 14 9.7 24 27 67 10 0,2 3 85.79 52829100 85.79 5283010010.0 25 9.7 31 33 73 10 0,2 3 107.73 52832100 107.73 5283310012.0 16 11.6 26 28 73 12 0,2 3 118.25 52829120 118.25 5283012012.0 28 11.6 37 39 84 12 0,2 3 144.48 52832120 144.48 5283312014.0 18 13.6 28 30 75 14 0,2 3 159.94 52829140 159.94 5283014014.0 30 13.6 37 39 84 14 0,2 3 182.87 52832140 182.87 5283314016.0 20 15.5 32 35 83 16 0,2 3 178.37 52829160 178.37 5283016016.0 35 15.5 43 45 93 16 0,2 3 229.48 52832160 229.48 5283316018.0 20 17.5 34 37 85 18 0,2 3 228.06 52829180 228.06 5283018018.0 35 17.5 43 45 93 18 0,2 3 276.43 52832180 276.43 5283318020.0 25 19.5 40 43 93 20 0,3 3 287.30 52829200 287.30 5283020020.0 40 19.5 52 54 104 20 0,2 3 354.98 52832200 354.98 52833200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 45
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB blank blank
PG V1 PG V1Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 831 ... 52 834 ...mm mm mm mm mm mm mm mm £ £2.0 4 1.9 8 18 54 6 0,04 3 38.61 528310202.0 7 1.9 10 22 58 6 0,04 3 42.13 528340202.5 5 2.4 8 18 54 6 0,07 3 38.61 528310253.0 6 2.9 9 18 54 6 0,07 3 38.61 528310303.0 10 2.9 14 22 58 6 0,07 3 42.13 528340304.0 7 3.8 12 18 54 6 0,07 3 38.61 528310404.0 13 3.8 17 22 58 6 0,07 3 42.13 528340405.0 8 4.8 16 18 54 6 0,12 3 38.61 528310505.0 15 4.8 19 22 58 6 0,07 3 42.13 528340506.0 10 5.8 16 18 54 6 0,12 3 38.61 528310606.0 16 5.8 20 22 58 6 0,12 3 42.13 528340607.0 11 6.7 18 23 59 8 0,12 3 47.62 528310707.0 19 6.7 23 34 70 8 0,12 3 53.21 528340708.0 12 7.7 20 23 59 8 0,12 3 43.12 528310808.0 22 7.7 26 34 70 8 0,12 3 48.16 528340809.0 13 8.7 22 27 67 10 0,2 3 75.25 528310909.0 23 8.7 28 33 73 10 0,12 3 95.44 52834090
10.0 14 9.7 24 27 67 10 0,2 3 68.12 5283110010.0 25 9.7 31 33 73 10 0,2 3 86.45 5283410012.0 16 11.6 26 28 73 12 0,2 3 94.56 5283112012.0 28 11.6 37 39 84 12 0,2 3 116.61 5283412014.0 18 13.6 28 30 75 14 0,2 3 132.85 5283114014.0 30 13.6 37 39 84 14 0,2 3 149.96 5283414016.0 20 15.5 32 35 83 16 0,2 3 144.69 5283116016.0 35 15.5 43 45 93 16 0,2 3 183.97 5283416018.0 20 17.5 34 37 85 18 0,2 3 193.39 5283118018.0 35 17.5 43 45 93 18 0,2 3 226.30 5283418020.0 25 19.5 40 43 93 20 0,3 3 244.63 5283120020.0 40 19.5 52 54 104 20 0,2 3 292.34 52834200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ●
Solid Carbide milling cutters
13 / 46 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 835 ... 52 836 ...mm mm mm mm mm mm mm mm £ £
3 20 3.0 20 24 60 6 0,07 3 117.38 52835030 117.38 528360304 30 3.8 35 39 75 6 0,07 3 117.38 52835040 117.38 528360405 30 4.8 35 39 75 6 0,12 3 117.38 52835050 117.38 528360506 40 5.8 60 64 100 6 0,12 3 106.19 52835060 106.19 528360608 40 7.7 60 64 100 8 0,12 3 120.45 52835080 120.45 5283608010 40 9.7 55 60 100 10 0,2 3 158.73 52835100 158.73 5283610012 45 11.6 50 55 100 12 0,2 3 215.77 52835120 215.77 5283612014 45 13.6 50 55 100 14 0,2 3 355.64 52835140 355.64 5283614016 65 15.5 90 102 150 16 0,2 3 482.66 52835160 482.66 5283616018 65 17.5 90 102 150 18 0,2 3 534.44 52835180 534.44 5283618020 65 19.5 90 100 150 20 0,3 3 602.67 52835200 602.67 52836200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ● ○
Solid Carbide milling cutters
13
toolingcenter.com 13 / 47
HPC Solid carbide end milling cutter, ≈ DIN 6527 / factory standard
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
K
l5 with Shank DIN 6535 HB Ti 1500 Ti 1500 Ti 1500
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 e8 l2 d3 l3 l6 l5 l1 d2 h6 K
Z 52 784 ... 52 784 ... 52 784 ...mm mm mm mm mm mm mm mm mm £ £ £1.5 2.3 1.4 6 14 21 57 6 0,04 3 53.52 527840172.0 3.0 1.9 8 15 21 57 6 0,04 3 53.52 527840222.5 3.8 2.4 10 16 21 57 6 0,07 3 53.52 527840273.0 5.0 2.9 14 18 21 57 6 0,07 3 53.52 527840323.0 8.0 2.9 14 18 21 57 6 0,07 3 56.06 527840343.0 5.0 2.9 19 23 26 62 6 0,07 3 56.06 527840364.0 8.0 3.8 18 20 21 57 6 0,07 3 53.52 527840424.0 11.0 3.8 18 20 21 57 6 0,07 3 57.59 527840444.0 8.0 3.8 23 25 26 62 6 0,07 3 57.59 527840465.0 9.0 4.8 19 20 21 57 6 0,12 3 53.52 527840525.0 13.0 4.8 19 20 21 57 6 0,12 3 57.59 527840545.0 9.0 4.8 24 25 26 62 6 0,12 3 57.59 527840566.0 10.0 5.8 20 21 57 6 0,12 4 77.86 527840626.0 13.0 5.8 20 21 57 6 0,12 4 77.86 527840646.0 10.0 5.8 25 26 62 6 0,12 4 77.86 527840668.0 12.0 7.7 25 27 63 8 0,12 4 91.97 527840828.0 19.0 7.7 25 27 63 8 0,12 4 91.97 527840848.0 12.0 7.7 30 32 68 8 0,12 4 91.97 52784086
10.0 15.0 9.5 30 32 72 10 0,2 4 118.08 5278410210.0 22.0 9.5 30 32 72 10 0,2 4 118.08 5278410410.0 15.0 9.5 35 40 80 10 0,2 4 118.08 5278410612.0 18.0 11.5 35 38 83 12 0,2 4 168.35 5278412212.0 26.0 11.5 35 38 83 12 0,2 4 168.35 5278412412.0 18.0 11.5 45 48 93 12 0,2 4 168.35 5278412614.0 21.0 13.5 35 38 83 14 0,2 4 221.90 5278414214.0 26.0 13.5 35 38 83 14 0,2 4 221.90 5278414414.0 21.0 13.5 50 54 99 14 0,2 4 233.01 5278414616.0 24.0 15.5 40 44 92 16 0,2 4 231.27 5278416116.0 24.0 15.5 40 44 92 16 0,2 5 255.20 52784162 1)
16.0 32.0 15.5 40 44 92 16 0,2 4 245.54 5278416316.0 32.0 15.5 40 44 92 16 0,2 5 255.20 52784164 1)
16.0 24.0 15.5 55 60 108 16 0,2 4 253.17 5278416516.0 24.0 15.5 55 60 108 16 0,2 5 255.20 52784166 1)
18.0 27.0 17.5 40 44 92 18 0,2 4 300.35 5278418118.0 27.0 17.5 40 44 92 18 0,2 5 336.34 52784182 1)
18.0 32.0 17.5 40 44 92 18 0,2 4 317.94 5278418318.0 32.0 17.5 40 44 92 18 0,2 5 336.34 52784184 1)
18.0 27.0 17.5 60 66 114 18 0,2 4 344.13 5278418518.0 27.0 17.5 60 66 114 18 0,2 5 336.34 52784186 1)
20.0 30.0 19.5 50 54 104 20 0,3 4 349.65 5278420120.0 30.0 19.5 50 54 104 20 0,3 5 380.66 52784202 1)
20.0 38.0 19.5 50 54 104 20 0,3 4 370.43 5278420320.0 38.0 19.5 50 54 104 20 0,3 5 399.69 52784204 1)
20.0 30.0 19.5 70 76 126 20 0,3 4 391.27 5278420520.0 30.0 19.5 70 76 126 20 0,3 5 399.69 52784206 1)
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 259-263○ ● ○ ○ ● ○
1) Cutter not suitable for full slot milling, use for finishing and trochoidal milling when slotting only!
Solid Carbide milling cutters
13 / 48 toolingcenter.com
HPC Solid carbide end milling cutter, ≈ DIN 6527 / factory standard - with axial through coolant
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
K Ti 1500
PG V1Article no.
d1 e8 l2 d3 l3 l6 l5 l1 d2 h6 K
Z 52 786 ...mm mm mm mm mm mm mm mm mm £
3 8 2.9 14 18 21 57 6 0,07 3 61.70 527860344 11 3.8 18 20 21 57 6 0,07 3 61.70 527860445 13 4.8 19 20 21 57 6 0,12 3 64.63 527860546 13 5.8 20 21 57 6 0,12 4 84.75 527860648 19 7.7 25 27 63 8 0,12 4 101.69 5278608410 22 9.5 30 32 72 10 0,2 4 126.55 5278610412 26 11.5 35 38 83 12 0,2 4 181.91 5278612414 26 13.5 35 38 83 14 0,2 4 249.15 5278614416 32 15.5 40 44 92 16 0,2 4 280.58 5278616316 32 15.5 40 44 92 16 0,2 5 272.87 52786164 1)
18 32 17.5 40 44 92 18 0,2 4 370.43 5278618318 32 17.5 40 44 92 18 0,2 5 373.70 52786184 1)
20 38 19.5 50 54 104 20 0,3 4 437.30 5278620320 38 19.5 50 54 104 20 0,3 5 415.23 52786204 1)
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 259-261○ ● ○ ○ ● ○
1) Cutter not suitable for full slot milling, use for finishing and trochoidal milling when slotting only!
Solid Carbide milling cutters
toolingcenter.com 13 / 49
13
Solid Carbide End Mill,≈ DIN 6527
l2
Ød2
Ød1
l1
l3l5
r
AlTi
PG V1Article no.
d1 f8 r l2 l3 l5 l1 d2 h5 Z 52 500 ...
mm mm mm mm mm mm mm £4 0.1 11 14 21 57 6 4 49.13 525000405 0.1 13 16 21 57 6 4 49.13 525000506 0.1 13 21 57 6 4 51.81 525000608 0.2 21 27 63 8 4 59.33 5250008010 0.2 22 32 72 10 4 102.07 5250010012 0.2 26 38 83 12 4 138.43 5250012016 0.3 36 44 92 16 4 286.65 5250016020 0.3 41 54 104 20 4 371.01 52500200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 264-265 ● ●
Solid Carbide End Mill,≈ DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3
r
AlTi
PG V1Article no.
d1 f8 r l2 d3 l3 l5 l1 d2 h5 Z 52 501 ...
mm mm mm mm mm mm mm mm £4 0.1 11 3.8 17 21 57 6 5 51.71 52501040 1)
5 0.1 13 4.8 19 21 57 6 5 51.71 52501050 1)
6 0.1 13 5.8 19 21 57 6 5 54.28 52501060 1)
8 0.2 21 7.7 25 27 63 8 5 62.42 52501080 1)
10 0.2 22 9.7 30 32 72 10 5 107.12 52501100 1)
12 0.2 26 11.6 36 38 83 12 5 144.92 52501120 1)
16 0.3 36 15.5 42 44 92 16 5 300.66 52501160 1)
20 0.3 41 19.5 52 54 104 20 5 389.34 52501200 1)
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 266-267 ● ●
1) Cutter not suitable for full slot milling, use for finishing and trochoidal milling when slotting only!
Solid Carbide milling cutters
13 / 50 toolingcenter.com
Solid Carbide End Mill with corner radius, factory standard
l2
Ød2
Ød1
l1
l3l5
r
AlTi
PG V1Article no.
d1 f8 r l2 l3 l5 l1 d2 h5 Z 52 502 ...
mm mm mm mm mm mm mm £4 0.2 11 14 21 57 6 4 50.16 525020404 0.4 11 14 21 57 6 4 50.16 525020414 0.5 11 14 21 57 6 4 50.16 525020425 0.5 13 16 21 57 6 4 50.16 525020505 1.0 13 16 21 57 6 4 50.16 525020516 0.4 13 21 57 6 4 52.74 525020606 0.5 13 21 57 6 4 52.74 525020616 0.6 13 21 57 6 4 52.74 525020626 0.8 13 21 57 6 4 52.74 525020636 1.0 13 21 57 6 4 52.74 525020646 1.5 13 21 57 6 4 52.74 525020658 0.5 21 27 63 8 4 60.56 525020808 0.8 21 27 63 8 4 60.56 525020818 1.0 21 27 63 8 4 60.56 525020828 1.2 21 27 63 8 4 60.56 525020838 1.5 21 27 63 8 4 60.56 525020848 2.0 21 27 63 8 4 60.56 5250208510 0.5 22 32 72 10 4 104.03 5250210010 1.0 22 32 72 10 4 104.03 5250210110 1.2 22 32 72 10 4 104.03 5250210210 1.5 22 32 72 10 4 104.03 5250210310 1.6 22 32 72 10 4 104.03 5250210410 2.0 22 32 72 10 4 104.03 5250210512 0.5 26 38 83 12 4 140.60 5250212012 1.0 26 38 83 12 4 140.60 5250212112 1.2 26 38 83 12 4 140.60 5250212212 1.5 26 38 83 12 4 140.60 5250212312 1.6 26 38 83 12 4 140.60 5250212412 2.0 26 38 83 12 4 140.60 5250212512 2.5 26 38 83 12 4 140.60 5250212612 4.0 26 38 83 12 4 140.60 5250212716 1.0 36 44 92 16 4 292.01 5250216016 1.6 36 44 92 16 4 292.01 5250216116 2.0 36 44 92 16 4 292.01 5250216216 2.5 36 44 92 16 4 292.01 5250216316 3.2 36 44 92 16 4 292.01 5250216416 4.0 36 44 92 16 4 292.01 5250216520 1.0 41 54 104 20 4 519.12 5250220020 2.0 41 54 104 20 4 519.12 5250220120 4.0 41 54 104 20 4 519.12 5250220220 5.0 41 54 104 20 4 519.12 5250220320 6.3 41 54 104 20 4 519.12 52502204
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 264-265 ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 51
13
Solid carbide end milling cutter, DIN 6527
l2
Ød2
Ød1
l1
K
l3
blank
PG V1Article no.
d1 h10 l2 l3 l1 d2 h5 K
Z 52 668 ...mm mm mm mm mm mm £
2 7 10 57 6 0,04 3 104.87 526680203 8 14 57 6 0,07 3 106.43 526680304 11 18 57 6 0,07 3 106.43 526680405 13 18 57 6 0,12 3 104.87 526680506 13 57 6 0,12 3 100.02 526680608 19 63 8 0,12 3 115.08 5266808010 22 72 10 0,2 3 146.99 5266810010 22 72 10 0,2 4 152.21 5266810112 26 83 12 0,2 4 185.78 5266812012 26 83 12 0,2 6 195.99 5266812116 32 92 16 0,2 6 273.70 5266816020 38 104 20 0,3 6 424.01 52668200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ●
Solid carbide end milling cutter, DIN 6527
l2
Ød2
Ød1
l1
K
l3
Ti 20
PG V1Article no.
d1 h10 l2 l3 l1 d2 h5 K
Z 52 639 ...mm mm mm mm mm mm £
2 7 10 57 6 0,04 3 117.21 526390203 8 14 57 6 0,07 3 117.21 526390304 11 18 57 6 0,07 3 117.21 526390405 13 18 57 6 0,12 3 117.21 526390506 13 57 6 0,12 3 111.77 526390608 19 63 8 0,12 3 134.66 5263908010 22 72 10 0,2 3 165.62 5263910010 22 72 10 0,2 4 169.79 5263910112 26 83 12 0,2 4 208.80 5263912012 26 83 12 0,2 6 218.17 5263912116 32 92 16 0,2 6 300.28 5263916020 38 104 20 0,3 6 457.94 52639200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
13 / 52 toolingcenter.com
Solid Carbide End Mill, DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank
PG V1 PG V1Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 309 ... 52 313 ...
mm mm mm mm mm mm mm £ £2 4 1.9 8.0 18 54 6 4 37.30 523090202 7 2.0 9.5 22 58 6 4 40.81 523130203 6 2.9 9.0 18 54 6 4 37.30 523090303 10 2.8 14.0 22 58 6 4 40.81 523130304 8 3.8 12.0 18 54 6 4 37.30 523090404 13 3.8 17.0 22 58 6 4 40.81 523130405 9 4.8 16.0 18 54 6 4 37.30 523090505 15 4.8 19.0 22 58 6 4 40.81 523130506 10 5.8 16.0 18 54 6 4 37.30 523090606 16 5.7 20.0 22 58 6 4 40.81 523130607 19 6.7 23.0 27 63 8 4 50.24 523130708 12 7.7 20.0 22 58 8 4 41.68 523090808 22 7.7 26.0 34 70 8 4 46.63 523130809 23 8.7 28.0 33 73 10 4 88.20 5231309010 14 9.7 24.0 26 66 10 4 65.82 5230910010 25 9.6 31.0 33 73 10 4 83.48 5231310011 26 10.6 34.0 39 84 12 4 119.03 5231311012 16 11.6 26.0 28 73 12 4 91.38 5230912012 28 11.6 37.0 39 84 12 4 112.66 5231312014 18 13.6 28.0 30 75 14 4 128.35 5230914014 30 13.6 37.0 36 84 14 4 144.91 5231314016 22 15.5 32.0 34 82 16 4 139.76 5230916016 35 15.6 43.0 45 93 16 4 177.82 5231316018 21 17.5 34.0 36 80 18 4 186.81 5230918018 35 17.6 43.0 43 93 18 4 218.63 5231318020 26 19.5 40.0 42 92 20 4 236.40 5230920020 40 19.6 52.0 54 104 20 4 282.47 52313200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 53
13
Solid Carbide End Mill, DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB
Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 306 ... 52 307 ... 52 310 ... 52 311 ... 52 314 ... 52 314 ...mm mm mm mm mm mm mm mm £ £ £ £ £ £1.5 3 1.4 6 38 3 0,02 4 42.90 523060152.0 4 1.9 8 38 3 0,03 4 42.90 523060212.0 4 1.9 8 18 54 6 0,03 4 48.60 52306020 48.60 523070202.0 7 2.0 8 38 2 0,03 4 32.69 523100202.5 4 2.4 8 38 3 0,04 4 42.90 523060253.0 6 2.9 9 18 54 6 0,04 4 48.60 52306030 48.60 523070303.0 6 2.9 9 38 3 0,04 4 42.90 523060313.0 10 2.8 14 38 3 0,03 4 33.90 523100303.0 16 2.8 32 75 3 0,04 4 62.64 523140324.0 8 3.8 12 18 54 6 0,05 4 48.60 52306040 48.60 523070404.0 13 3.8 17 50 4 0,04 4 35.87 523100404.0 16 3.8 32 75 4 0,05 4 65.50 523140424.0 20 3.8 48 100 4 0,05 4 69.77 523140435.0 9 4.8 16 18 54 6 0,06 4 48.60 52306050 48.60 523070505.0 15 4.8 19 50 5 0,04 4 44.54 523100505.0 20 4.8 35 75 5 0,06 4 72.63 523140525.0 25 4.8 55 100 5 0,06 4 80.86 523140536.0 10 5.8 16 18 54 6 0,07 4 48.60 52306060 48.60 523070606.0 16 5.7 20 22 58 6 0,04 4 50.57 52310060 50.57 523110606.0 24 5.8 42 44 80 6 0,07 4 92.59 523140606.0 30 5.8 62 64 100 6 0,07 4 106.96 523140617.0 19 6.7 23 27 63 8 0,05 4 65.50 52310070 65.50 523110708.0 12 7.7 20 22 58 8 0,08 4 56.83 52306080 56.83 523070808.0 22 7.7 26 34 70 8 0,06 4 61.76 52310080 61.76 523110808.0 32 7.8 60 64 100 8 0,08 4 115.51 523140808.0 40 7.8 75 84 120 8 0,08 4 138.87 523140819.0 23 8.7 28 33 73 10 0,07 4 109.59 52310090 109.59 52311090
10.0 14 9.7 24 26 66 10 0,1 4 86.99 52306100 86.99 5230710010.0 25 9.6 31 33 73 10 0,08 4 103.56 52310100 103.56 5231110010.0 40 9.8 58 60 100 10 0,1 4 157.64 5231410010.0 50 9.8 78 80 120 10 0,1 4 189.89 5231410111.0 26 10.6 34 39 84 12 0,1 4 146.78 52310110 146.78 5231111012.0 16 11.6 26 28 73 12 0,13 4 120.02 52306120 120.02 5230712012.0 28 11.6 37 39 84 12 0,13 4 138.99 52310120 138.99 5231112012.0 48 11.8 60 75 120 12 0,13 4 231.02 5231412012.0 60 11.8 90 105 150 12 0,13 4 274.24 5231412114.0 18 13.6 28 30 75 14 0,15 4 162.46 52306140 162.46 5230714014.0 30 13.6 37 36 84 14 0,15 4 175.74 52310140 175.74 5231114014.0 45 13.8 50 52 100 14 0,15 4 295.30 5231414014.0 56 13.8 95 102 150 14 0,15 4 332.38 5231414116.0 22 15.5 32 34 82 16 0,18 4 181.00 52306160 181.00 5230716016.0 35 15.6 43 45 93 16 0,18 4 220.71 52310160 220.71 5231116016.0 50 15.8 70 77 125 16 0,18 4 339.84 5231416016.0 65 15.8 95 102 150 16 0,18 4 384.49 5231416118.0 21 17.5 34 36 80 18 0,18 4 231.35 52306180 231.35 5230718018.0 35 17.6 43 43 93 18 0,18 4 265.79 52310180 265.79 5231118018.0 55 17.8 75 80 130 18 0,18 4 479.82 5231418018.0 72 17.8 95 100 150 18 0,18 4 551.44 5231418120.0 26 19.5 40 42 92 20 0,2 4 291.47 52306200 291.47 5230720020.0 40 19.6 52 54 104 20 0,2 4 341.37 52310200 341.37 5231120020.0 60 19.8 80 85 135 20 0,2 4 589.40 5231420020.0 80 19.8 95 50 150 20 0,2 4 642.27 5231420125.0 75 24.5 90 94 150 25 0,25 4 776.09 52314250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 54 toolingcenter.com
Solid Carbide End Mill, DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
Kl5 with Shank DIN 6535 HB
blank blank
PG V1 PG V1Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 315 ... 52 315 ...mm mm mm mm mm mm mm mm £ £
3 16 2.8 32 75 3 0,04 4 53.10 523150324 16 3.8 32 75 4 0,05 4 50.90 523150424 20 3.8 48 100 4 0,05 4 61.11 523150435 20 4.8 35 75 5 0,06 4 61.43 523150525 25 4.8 55 100 5 0,06 4 64.28 523150536 24 5.8 42 44 80 6 0,07 4 81.83 523150606 30 5.8 62 64 100 6 0,07 4 93.03 523150618 32 7.8 60 64 100 8 0,08 4 99.38 523150808 40 7.8 75 84 120 8 0,08 4 115.73 5231508110 40 9.8 58 60 100 10 0,1 4 134.27 5231510010 50 9.8 78 80 120 10 0,1 4 155.99 5231510112 48 11.8 60 75 120 12 0,13 4 195.48 5231512012 60 11.8 90 105 150 12 0,13 4 235.85 5231512114 45 13.8 50 52 100 14 0,15 4 257.35 5231514014 56 13.8 95 102 150 14 0,15 4 286.09 5231514116 50 15.8 70 77 125 16 0,18 4 294.54 5231516016 65 15.8 95 102 150 16 0,18 4 338.75 5231516118 55 17.8 75 80 130 18 0,18 4 412.24 5231518018 72 17.8 95 100 150 18 0,18 4 474.44 5231518120 60 19.8 80 85 135 20 0,2 4 498.79 5231520020 80 19.8 95 50 150 20 0,2 4 541.89 5231520125 75 24.5 90 94 150 25 0,25 4 671.33 52315250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 55
13
Solid Carbide End Mill, DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 Z 52 308 ... 52 312 ... 52 312 ...
mm mm mm mm mm mm mm £ £ £2 4 1.9 8.0 18 54 6 4 46.07 523080202 7 2.0 9.5 58 6 4 50.57 52312021 50.57 523120203 6 2.9 9.0 18 54 6 4 46.07 523080303 10 2.8 14.0 58 6 4 50.57 52312031 50.57 523120304 8 3.8 12.0 18 54 6 4 46.07 523080404 13 3.8 17.0 58 6 4 50.57 52312041 50.57 523120405 9 4.8 16.0 18 54 6 4 46.07 523080505 15 4.8 19.0 58 6 4 50.57 52312051 50.57 523120506 10 5.8 16.0 18 54 6 4 46.07 523080606 16 5.7 20.0 22 58 6 4 50.57 52312061 50.57 523120607 19 6.7 23.0 27 63 8 4 65.50 52312071 65.50 523120708 12 7.7 20.0 22 58 8 4 53.87 523080808 22 7.7 26.0 34 70 8 4 61.76 52312081 61.76 523120809 23 8.7 28.0 33 73 10 4 109.59 52312091 109.59 5231209010 14 9.7 24.0 26 66 10 4 82.49 5230810010 25 9.6 31.0 33 73 10 4 103.56 52312101 103.56 5231210011 26 10.6 34.0 39 84 12 4 146.78 52312111 146.78 5231211012 16 11.6 26.0 28 73 12 4 113.76 5230812012 28 11.6 37.0 39 84 12 4 138.99 52312121 138.99 5231212014 18 13.6 28.0 30 75 14 4 154.02 5230814014 30 13.6 37.0 36 84 14 4 175.74 52312141 175.74 5231214016 22 15.5 32.0 34 82 16 4 171.57 5230816016 35 15.6 43.0 45 93 16 4 220.71 52312161 220.71 5231216018 21 17.5 34.0 36 80 18 4 219.29 5230818018 35 17.6 43.0 43 93 18 4 265.79 52312181 265.79 5231218020 26 19.5 40.0 42 92 20 4 276.22 5230820020 40 19.6 52.0 54 104 20 4 341.37 52312201 341.37 52312200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 56 toolingcenter.com
Solid Carbide End Mill with Corner Radius, DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3
r
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 e8 r ±0,01 l2 d3 l3 l5 l1 d2 h6 Z 52 316 ... 52 317 ...
mm mm mm mm mm mm mm mm £ £3 0.3 8 2.8 13 21 57 6 4 100.27 52316031 100.27 523170313 0.5 8 2.8 13 21 57 6 4 100.27 52316032 100.27 523170324 0.3 11 3.8 16 21 57 6 4 96.97 52316041 96.97 523170414 0.5 11 3.8 16 21 57 6 4 96.97 52316042 96.97 523170425 0.3 13 4.8 18 21 57 6 4 96.97 52316051 96.97 523170515 0.5 13 4.8 18 21 57 6 4 96.97 52316052 96.97 523170526 0.5 13 5.8 21 26 57 6 4 84.58 52316062 84.58 523170626 1.0 13 5.8 21 26 57 6 4 84.58 52316064 84.58 523170646 1.5 13 5.8 21 26 57 6 4 84.58 52316065 84.58 523170658 0.5 19 7.8 27 32 63 8 4 129.67 52316082 129.67 523170828 1.0 19 7.8 27 32 63 8 4 129.67 52316084 129.67 523170848 1.5 19 7.8 27 32 63 8 4 129.67 52316085 129.67 523170858 2.0 19 7.8 27 32 63 8 4 129.67 52316086 129.67 5231708610 1.0 22 9.8 32 35 72 10 4 162.03 52316104 162.03 5231710410 1.5 22 9.8 32 35 72 10 4 162.03 52316105 162.03 5231710510 2.0 22 9.8 32 35 72 10 4 162.03 52316106 162.03 5231710612 1.0 26 11.8 38 38 83 12 4 214.46 52316124 214.46 5231712412 1.5 26 11.8 38 38 83 12 4 214.46 52316125 214.46 5231712512 2.0 26 11.8 38 38 83 12 4 214.46 52316126 214.46 5231712612 3.0 26 11.8 38 38 83 12 4 214.46 52316128 214.46 5231712816 1.0 32 15.8 44 44 92 16 4 358.71 52316164 358.71 5231716416 1.5 32 15.8 44 44 92 16 4 358.71 52316165 358.71 5231716516 2.0 32 15.8 44 44 92 16 4 358.71 52316166 358.71 5231716616 3.0 32 15.8 44 44 92 16 4 358.71 52316168 358.71 5231716820 1.5 38 19.8 52 54 104 20 4 525.89 52316205 525.89 5231720520 2.0 38 19.8 52 54 104 20 4 525.89 52316206 525.89 5231720620 3.0 38 19.8 52 54 104 20 4 525.89 52316208 525.89 52317208
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 57
13
Solid carbide end milling cutter, DIN 6527 - Cutting edges with irregular pitch
l2
Ød2
Ød1
l1
l3l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 l3 l5 l1 d2 h6 Z 52 121 ... 52 131 ... 52 126 ... 52 132 ...
mm mm mm mm mm mm £ £ £ £3.0 6 8.0 18 54 6 4 53.52 52121030 47.46 521310303.0 10 12.5 22 58 6 4 57.27 52126030 51.86 521320303.5 7 10.5 18 54 6 4 53.52 52121035 47.46 521310353.5 13 16.0 22 58 6 4 57.27 52126035 51.86 521320354.0 7 10.5 18 54 6 4 53.52 52121040 47.46 521310404.0 13 16.0 22 58 6 4 57.27 52126040 51.86 521320404.5 8 10.5 18 54 6 4 53.52 52121045 47.46 521310454.5 15 18.0 22 58 6 4 57.27 52126045 51.86 521320455.0 8 11.0 18 54 6 4 53.52 52121050 47.46 521310505.0 15 18.0 22 58 6 4 57.27 52126050 51.86 521320506.0 10 18 54 6 4 77.86 52121060 47.46 521310606.0 16 22 58 6 4 93.23 52126060 51.86 521320608.0 12 23 59 8 4 91.97 52121080 54.94 521310808.0 22 34 70 8 4 107.79 52126080 63.01 52132080
10.0 14 27 67 10 4 118.08 52121100 82.06 5213110010.0 25 33 73 10 4 141.81 52126100 103.10 5213210012.0 16 28 73 12 4 168.35 52121120 114.13 5213112012.0 28 39 84 12 4 206.43 52126120 133.82 5213212014.0 16 30 75 14 4 221.90 52121140 153.40 5213114014.0 30 39 84 14 4 262.47 52126140 166.10 5213214016.0 20 35 83 16 4 243.04 52121160 170.36 5213116016.0 35 45 93 16 4 323.60 52126160 205.49 5213216018.0 20 32 80 18 4 320.33 52121180 201.34 5213118018.0 35 45 93 18 4 381.55 52126180 243.33 5213218020.0 25 43 93 20 4 380.66 52121200 252.59 5213120020.0 40 54 104 20 4 455.34 52126200 313.09 52132200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 58 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3l5
l5 with Shank DIN 6535 HB blank blank TiCN TiCN
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 l3 l5 l1 d2 h6 Z 52 100 ... 52 105 ... 52 101 ... 52 106 ...
mm mm mm mm mm mm £ £ £ £3 6 8 18 54 6 4 34.89 521000303 10 13 22 58 6 4 38.91 521050304 7 9 18 54 6 4 34.89 52100040 54.92 521010404 13 15 22 58 6 4 38.91 52105040 59.78 521060405 8 11 18 54 6 4 34.89 52100050 54.92 521010505 15 17 22 58 6 4 38.91 52105050 59.78 521060506 10 18 54 6 4 34.89 52100060 54.92 521010606 16 22 58 6 4 38.91 52105060 59.78 521060608 12 23 59 8 4 40.71 52100080 67.01 521010808 22 28 64 8 4 42.14 52105080 70.40 52106080
10 14 20 60 10 4 54.58 52100100 89.16 5210110010 25 33 73 10 4 73.33 52105100 117.51 5210610012 16 25 70 12 4 81.99 52100120 137.51 5210112012 28 39 84 12 4 105.72 52105120 175.81 5210612014 18 25 70 14 4 117.82 52100140 183.94 5210114014 30 39 84 14 4 136.92 52105140 216.49 5210614016 20 32 80 16 4 124.09 52100160 271.41 5210116016 35 45 93 16 4 169.79 52105160 266.66 5210616018 20 32 80 18 4 176.54 52100180 263.37 5210118018 35 45 93 18 4 206.32 52105180 312.30 5210618020 25 35 85 20 4 223.99 52100200 318.86 5210120020 40 50 100 20 4 264.56 52105200 381.21 5210620025 50 69 125 25 4 462.20 52105250 641.54 52106250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 59
13
Solid carbide end milling cutter, factory standard - optimal quiet running with irregular helix
l2
Ød2
Ød1
l1
l3
Ød3
Ti 1000
PG V1Article no.
d1 e8 l2 d3 l3 l1 d2 h6 Z 52 102 ...
mm mm mm mm mm mm £2 7 1.8 11 58 6 4 58.84 521020203 8 2.8 13 58 6 4 56.10 521020304 11 3.8 16 58 6 4 52.91 521020405 13 4.8 18 58 6 4 48.31 521020506 16 5.8 26 58 6 4 55.76 521020608 22 7.8 32 64 8 4 63.83 5210208010 25 9.8 35 73 10 4 109.15 5210210012 28 11.8 38 84 12 4 148.19 52102120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13 / 60 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard - optimal quiet running with irregular helix
l2
Ød2
Ød1
l1
r
Ød3
l3
Ti 1000
PG V1Article no.
d1 e8 r ±0,01 l2 d3 l3 l1 d2 h6 Z 52 102 ...
mm mm mm mm mm mm mm £2 0.2 7 1.8 11 58 6 4 74.04 521020223 0.3 8 2.8 13 58 6 4 70.95 521020334 0.4 11 3.8 16 58 6 4 67.99 521020445 0.5 13 4.8 18 58 6 4 67.99 521020556 0.5 16 5.8 26 58 6 4 70.71 521020656 1.0 16 5.8 26 58 6 4 70.71 521020668 0.5 22 7.8 32 64 8 4 100.85 521020858 1.0 22 7.8 32 64 8 4 100.85 521020868 1.5 22 7.8 32 64 8 4 100.85 5210208710 0.5 25 9.8 35 73 10 4 128.13 5210210510 1.0 25 9.8 35 73 10 4 128.13 5210210610 1.5 25 9.8 35 73 10 4 128.13 5210210712 0.5 28 11.8 38 84 12 4 171.43 5210212512 1.0 28 11.8 38 84 12 4 171.43 5210212612 1.5 28 11.8 38 84 12 4 171.43 52102127
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13
toolingcenter.com 13 / 61
HPC Solid Carbide End Mill, DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
K
l5 with Shank DIN 6535 HB Ti 1200 Ti 1200
PG V1 PG V1Article no. Article no.
d1 f8 l2 d3 l3 l6 l5 l1 d2 h5 K
Z 52 600 ... 52 601 ...mm mm mm mm mm mm mm mm mm £ £3.0 5 2.9 9 14 14 50 6 0,07 4 45.31 52600030 45.31 526010303.5 5 3.4 9 14 14 50 6 0,07 4 45.31 52600035 45.31 526010354.0 8 3.8 12 18 18 54 6 0,07 4 45.31 52600040 45.31 526010404.5 9 4.3 12 18 18 54 6 0,07 4 46.30 52600045 46.30 526010455.0 9 4.8 16 18 18 54 6 0,07 4 46.30 52600050 46.30 526010505.5 9 5.3 16 18 18 54 6 0,07 4 44.76 52600055 44.76 526010556.0 10 5.8 16 18 54 6 0,07 4 44.76 52600060 44.76 526010606.5 12 6.3 18 20 23 59 8 0,07 4 59.56 52600065 59.56 526010657.0 12 6.8 18 20 23 59 8 0,07 4 59.56 52600070 59.56 526010707.5 12 7.3 18 20 23 59 8 0,12 4 59.56 52600075 59.56 526010758.0 12 7.7 20 23 59 8 0,12 4 59.56 52600080 59.56 526010808.5 15 8.2 22 24 27 67 10 0,2 4 77.78 52600085 77.78 526010859.0 15 8.7 22 24 27 67 10 0,2 4 77.78 52600090 77.78 526010909.5 15 9.2 22 24 27 67 10 0,2 4 77.78 52600095 77.78 5260109510.0 15 9.5 24 27 67 10 0,2 4 77.78 52600100 77.78 5260110011.0 18 10.5 24 26 28 73 12 0,2 4 122.97 52600110 122.97 5260111011.5 18 11.0 24 26 28 73 12 0,2 4 122.97 52600115 122.97 5260111512.0 18 11.5 26 28 73 12 0,2 4 122.97 52600120 122.97 5260112014.0 21 13.5 28 30 75 14 0,2 4 157.86 52600140 157.86 5260114015.0 24 14.5 30 32 35 83 16 0,2 4 195.04 52600150 195.04 5260115015.5 24 15.0 30 32 35 83 16 0,2 4 195.04 52600155 195.04 5260115516.0 24 15.5 32 35 83 16 0,2 4 195.04 52600160 195.04 5260116016.0 24 15.5 32 35 83 16 0,2 5 205.25 52600161 1) 205.25 52601161 1)
17.0 27 16.5 32 34 37 85 18 0,2 4 265.25 52600170 265.25 5260117018.0 27 17.5 34 37 85 18 0,2 5 279.28 52600181 1) 279.28 52601181 1)
18.0 27 17.5 34 37 85 18 0,2 4 265.25 52600180 265.25 5260118019.0 30 18.5 38 40 43 93 20 0,3 4 300.89 52600190 300.89 5260119019.5 30 19.0 38 40 43 93 20 0,3 4 300.89 52600195 300.89 5260119520.0 30 19.5 40 43 93 20 0,3 5 316.69 52600201 1) 316.69 52601201 1)
20.0 30 19.5 40 43 93 20 0,3 4 300.89 52600200 300.89 52601200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250-251● ○ ● ○ ○ ○
1) Cutter not suitable for full slot milling, use for finishing and trochoidal milling when slotting only!
Solid Carbide milling cutters
13 / 62 toolingcenter.com
HPC Solid Carbide End Mill, DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
K
l5 with Shank DIN 6535 HB Ti 1200 Ti 1200
PG V1 PG V1Article no. Article no.
d1 f8 l2 d3 l3 l6 l5 l1 d2 h5 K
Z 52 602 ... 52 603 ...mm mm mm mm mm mm mm mm mm £ £3.0 8 2.9 14 20 22 58 6 0,07 4 45.31 52602030 45.31 526030303.5 8 3.4 14 20 22 58 6 0,07 4 45.31 52602035 45.31 526030354.0 11 3.8 18 20 22 58 6 0,07 4 45.31 52602040 45.31 526030404.5 13 4.3 18 20 22 58 6 0,07 4 46.30 52602045 46.30 526030455.0 13 4.8 19 20 22 58 6 0,07 4 46.30 52602050 46.30 526030505.5 13 5.3 19 20 22 58 6 0,07 4 44.76 52602055 44.76 526030556.0 13 5.8 20 22 58 6 0,07 4 44.76 52602060 44.76 526030606.5 19 6.3 23 25 28 64 8 0,07 4 59.56 52602065 59.56 526030657.0 19 6.8 23 25 28 64 8 0,07 4 59.56 52602070 59.56 526030707.5 19 7.3 23 25 28 64 8 0,12 4 59.56 52602075 59.56 526030758.0 19 7.7 25 28 64 8 0,12 4 59.56 52602080 59.56 526030808.5 22 8.2 28 30 33 73 10 0,2 4 77.78 52602085 77.78 526030859.0 22 8.7 28 30 33 73 10 0,2 4 77.78 52602090 77.78 526030909.5 22 9.2 28 30 33 73 10 0,2 4 77.78 52602095 77.78 5260309510.0 22 9.5 30 33 73 10 0,2 4 77.78 52602100 77.78 5260310011.0 26 10.5 32 35 39 84 12 0,2 4 122.97 52602110 122.97 5260311011.5 26 11.0 32 35 39 84 12 0,2 4 122.97 52602115 122.97 5260311512.0 26 11.5 35 39 84 12 0,2 4 122.97 52602120 122.97 5260312014.0 26 13.5 35 39 84 14 0,2 4 157.86 52602140 157.86 5260314015.0 32 14.5 38 40 45 93 16 0,2 4 195.04 52602150 195.04 5260315015.5 32 15.0 38 40 45 93 16 0,2 4 195.04 52602155 195.04 5260315516.0 32 15.5 40 45 93 16 0,2 4 195.04 52602160 195.04 5260316016.0 32 15.5 40 45 93 16 0,2 5 205.25 52602161 1) 205.25 52603161 1)
17.0 32 16.5 48 50 52 100 18 0,2 4 265.25 52602170 265.25 5260317018.0 32 17.5 50 52 100 18 0,2 5 279.28 52602181 1) 279.28 52603181 1)
18.0 32 17.5 50 52 100 18 0,2 4 265.25 52602180 265.25 5260318019.0 38 18.5 48 50 54 104 20 0,3 4 300.89 52602190 300.89 5260319019.5 38 19.0 48 50 54 104 20 0,3 4 300.89 52602195 300.89 5260319520.0 38 19.5 50 54 104 20 0,3 5 316.69 52602201 1) 316.69 52603201 1)
20.0 38 19.5 50 54 104 20 0,3 4 300.89 52602200 300.89 52603200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250-251● ○ ● ○ ○ ○
1) Cutter not suitable for full slot milling, use for finishing and trochoidal milling when slotting only!
Solid Carbide milling cutters
toolingcenter.com 13 / 63
13
HPC Solid Carbide End Mill, Factory Standard
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
K
l5 with Shank DIN 6535 HB Ti 1200 Ti 1200
PG V1 PG V1Article no. Article no.
d1 f8 l2 d3 l3 l6 l5 l1 d2 h5 K
Z 52 604 ... 52 605 ...mm mm mm mm mm mm mm mm mm £ £
3 5 2.9 14 20 22 58 6 0,07 4 45.31 526040303 5 2.9 19 23 26 62 6 0,07 4 52.88 526050304 8 3.8 18 20 22 58 6 0,07 4 45.31 526040404 8 3.8 23 25 26 62 6 0,07 4 52.88 526050405 9 4.8 19 20 22 58 6 0,07 4 46.30 526040505 9 4.8 24 25 26 62 6 0,07 4 53.87 526050506 10 5.8 16 20 22 58 6 0,07 4 44.76 526040606 10 5.8 25 26 62 6 0,07 4 52.33 526050608 12 7.7 20 25 28 64 8 0,12 4 59.56 526040808 12 7.7 30 32 68 8 0,12 4 69.11 52605080
10 15 9.5 24 30 33 73 10 0,2 4 77.78 5260410010 15 9.5 35 40 80 10 0,2 4 89.52 5260510012 18 11.5 26 35 39 84 12 0,2 4 122.97 5260412012 18 11.5 45 48 93 12 0,2 4 140.85 5260512014 21 13.5 28 35 39 84 14 0,2 4 157.86 5260414014 21 13.5 50 54 99 14 0,2 4 191.10 5260514016 24 15.5 32 40 45 93 16 0,2 4 195.04 5260416016 24 15.5 34 40 45 93 16 0,2 5 205.25 52604161 1)
16 24 15.5 55 60 108 16 0,2 4 231.02 5260516016 24 15.5 55 60 108 16 0,2 5 241.77 52605161 1)
18 27 17.5 34 50 52 100 18 0,2 4 265.25 5260418018 27 17.5 34 50 52 100 18 0,2 5 279.28 52604181 1)
18 27 17.5 60 66 114 18 0,2 4 328.44 5260518018 27 17.5 60 66 114 18 0,2 5 343.13 52605181 1)
20 30 19.5 40 50 54 104 20 0,3 4 300.89 5260420020 30 19.5 40 50 54 104 20 0,3 5 316.69 52604201 1)
20 30 19.5 70 76 126 20 0,3 4 368.47 5260520020 30 19.5 70 76 126 20 0,3 5 385.03 52605201 1)
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250-253● ○ ● ○ ○ ○
1) Cutter not suitable for full slot milling, use for finishing and trochoidal milling when slotting only!
Solid Carbide milling cutters
13 / 64 toolingcenter.com
HPC Solid Carbide End Mill with Thro' Coolant, DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
K Ti 1200
PG V1Article no.
d1 f8 l2 d3 l3 l6 l5 l1 d2 h5 K
Z 52 606 ...mm mm mm mm mm mm mm mm mm £
3 8 2.9 14 20 22 58 6 0,07 4 55.51 526060304 11 3.8 18 20 22 58 6 0,07 4 55.51 526060405 13 4.8 19 20 22 58 6 0,07 4 56.50 526060506 13 5.8 20 22 58 6 0,07 4 54.96 526060608 19 7.7 25 28 64 8 0,12 4 71.75 5260608010 22 9.5 30 33 73 10 0,2 4 92.14 5260610012 26 11.5 35 39 84 12 0,2 4 146.12 5260612014 26 13.5 35 39 84 14 0,2 4 201.29 5260614016 32 15.5 40 45 93 16 0,2 4 246.82 5260616018 32 17.5 50 52 100 18 0,2 4 341.49 5260618020 38 19.5 50 54 104 20 0,3 4 396.12 52606200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250-251● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 65
13
HPC Solid Carbide End Mill, Factory Standard
l2
Ød2
Ød1
l1
l5
Ød3
l3l6
rTi 1200
PG V1Article no.
d1 f8 r ±0,01 l2 d3 l3 l6 l5 l1 d2 h5 Z 52 607 ...
mm mm mm mm mm mm mm mm mm £3 0.10 8 2.9 14 20 22 58 6 4 51.35 526070303 0.30 8 2.9 14 20 22 58 6 4 51.35 526070313 0.50 8 2.9 14 20 22 58 6 4 51.35 526070324 0.10 11 3.8 18 20 22 58 6 4 51.35 526070404 0.40 11 3.8 18 20 22 58 6 4 51.35 526070414 0.50 11 3.8 18 20 22 58 6 4 51.35 526070425 0.10 13 4.8 19 20 22 58 6 4 52.44 526070505 0.50 13 4.8 19 20 22 58 6 4 52.44 526070515 1.00 13 4.8 19 20 22 58 6 4 52.44 526070526 0.10 13 5.8 20 22 58 6 4 50.79 526070606 0.50 13 5.8 20 22 58 6 4 50.79 526070616 1.00 13 5.8 20 22 58 6 4 50.79 526070628 0.15 19 7.7 25 28 64 8 4 67.47 526070808 0.50 19 7.7 25 28 64 8 4 67.47 526070818 1.00 19 7.7 25 28 64 8 4 67.47 526070828 2.00 19 7.7 25 28 64 8 4 67.47 5260708310 0.15 22 9.5 30 33 73 10 4 88.20 5260710010 0.50 22 9.5 30 33 73 10 4 88.20 5260710110 1.00 22 9.5 30 33 73 10 4 88.20 5260710210 1.50 22 9.5 30 33 73 10 4 88.20 5260710310 2.00 22 9.5 30 33 73 10 4 88.20 5260710412 0.20 26 11.5 35 39 84 12 4 139.43 5260712012 0.50 26 11.5 35 39 84 12 4 139.43 5260712112 1.00 26 11.5 35 39 84 12 4 139.43 5260712212 1.50 26 11.5 35 39 84 12 4 139.43 5260712312 2.00 26 11.5 35 39 84 12 4 139.43 5260712414 1.00 26 13.5 35 39 84 14 4 179.02 5260714016 0.30 32 15.5 40 45 93 16 4 221.15 5260716016 0.50 32 15.5 40 45 93 16 4 221.15 5260716116 1.00 32 15.5 40 45 93 16 4 221.15 5260716216 2.00 32 15.5 40 45 93 16 4 221.15 5260716316 4.00 32 15.5 40 45 93 16 4 221.15 5260716420 0.30 38 19.5 50 54 104 20 4 341.16 5260720020 0.50 38 19.5 50 54 104 20 4 341.16 5260720120 1.00 38 19.5 50 54 104 20 4 341.16 5260720220 2.00 38 19.5 50 54 104 20 4 341.16 52607203
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250-251● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 66 toolingcenter.com
HPC Solid Carbide End Mill, Factory Standard
l2
Ød2
Ød1
l1Ød3
l3l6
K Ti 1200 Ti 1200 Ti 1200
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 f8 l2 d3 l3 l6 l1 d2 h5 K
Z 52 608 ... 52 608 ... 52 608 ...mm mm mm mm mm mm mm mm £ £ £
5 9 4.8 16 18 54 6 0,12 6 60.67 526080505 13 4.8 19 20 58 6 0,12 6 60.67 526080515 13 4.8 24 25 62 6 0,12 6 68.90 526080526 10 5.8 16 54 6 0,12 6 58.80 526080606 13 5.8 20 58 6 0,12 6 58.80 526080616 13 5.8 25 62 6 0,12 6 66.92 526080628 12 7.7 20 59 8 0,12 6 78.10 526080808 19 7.7 25 64 8 0,12 6 78.10 526080818 19 7.7 30 68 8 0,12 6 88.42 52608082
10 15 9.5 24 67 10 0,2 6 102.02 5260810010 22 9.5 30 73 10 0,2 6 102.02 5260810110 22 9.5 35 80 10 0,2 6 114.53 5260810212 18 11.5 26 73 12 0,2 6 161.37 5260812012 26 11.5 35 84 12 0,2 6 161.37 5260812112 26 11.5 45 93 12 0,2 6 180.23 5260812216 24 15.5 32 83 16 0,2 6 255.92 5260816016 32 15.5 40 93 16 0,2 6 255.92 5260816116 32 15.5 55 108 16 0,2 6 295.74 5260816220 30 19.5 40 93 20 0,3 6 394.90 5260820020 38 19.5 50 104 20 0,3 6 394.90 5260820120 38 19.5 70 126 20 0,3 6 471.59 52608202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250-253● ○ ● ○ ○ ○
Solid Carbide milling cutters
13
toolingcenter.com 13 / 67
r2
r
tmax
r1
3D
Geometry
t max = Maximum deviation from the radius r leaving residual material
r3D = Radius to be programmed in CAM system
r1= Tangential radius between front radius and circumference cutting edge
r2 = Face radius
HPC/HSC solid carbide torus end mill, DIN 6527 - r3D = programmed corner radius
l2
Ød1
l1
l3
Ød3
Ød2
r1
r2
l5 l6
l5 with Shank DIN 6535 HB Ti 1200 Ti 1200 Ti 1200 Ti 1200
PG V2 PG V2 PG V2 PG V2Article no. Article no. Article no. Article no.
d1 -0,04 r3D l2 d3 l3 l5 l1 l6 d2 h5 r1 r2 tmax Z 52 609 ... 52 609 ... 52 610 ... 52 610 ...
mm mm mm mm mm mm mm mm mm mm mm mm £ £ £ £3 0.4 3 2.9 14 21 57 20 6 0.3 1,5 0.10 4 98.37 52609030 98.37 526090314 0.5 4 3.8 18 21 57 20 6 0.4 2 0.15 4 100.84 52609040 100.84 526090415 0.6 5 4.8 18 21 57 20 6 0.5 2,5 0.20 4 111.24 52609050 111.24 526090516 0.8 13 5.8 21 57 20 6 0.6 2,9 0.20 4 102.18 52609060 102.18 526090618 1.0 19 7.7 27 63 25 8 0.8 3,9 0.30 4 117.42 52609080 117.42 526090818 1.0 19 7.7 32 68 30 8 0.8 3,9 0.30 4 139.05 52610080 139.05 52610081
10 1.2 22 9.5 40 80 35 10 1.0 4,9 0.40 4 147.29 52610100 147.29 5261010110 1.2 22 9.5 32 72 30 10 1.0 4,9 0.40 4 139.05 52609100 139.05 5260910112 1.6 26 11.5 47 93 45 12 1.2 5,9 0.40 4 193.64 52610120 193.64 5261012112 1.6 26 11.5 38 83 35 12 1.2 5,9 0.40 4 177.16 52609120 177.16 5260912116 2.2 32 15.5 60 108 55 16 1.6 7,8 0.50 4 294.58 52610160 294.58 5261016116 2.2 32 15.5 44 92 40 16 1.6 7,8 0.50 4 279.13 52609160 279.13 52609161
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 254-257● ● ○ ○
Solid Carbide milling cutters
13 / 68 toolingcenter.com
Solid Carbide Ball Nosed Cutter, DIN 6527 - Radius accuracy: - 0,015 mm for Ø ≤ 6,0 mm / - 0,02 mm for Ø > 6,0 mm
Ød1
l1
Ød3
Ød2
l5l2 l6
l5 with Shank DIN 6535 HB Ti 1200 Ti 1200 Ti 1200 Ti 1200
PG V2 PG V2 PG V2 PG V2Article no. Article no. Article no. Article no.
d1 f8 l2 d3 l6 l5 l1 d2 h5 Z 52 611 ... 52 611 ... 52 612 ... 52 612 ...
mm mm mm mm mm mm mm £ £ £ £6 10 5.8 16 18 54 6 4 46.94 52611060 46.94 526110616 13 5.8 20 22 58 6 4 48.78 52612060 48.78 526120618 19 7.7 25 28 64 8 4 64.79 52612080 64.79 526120818 12 7.7 20 23 59 8 4 62.41 52611080 62.41 5261108110 22 9.5 30 33 73 10 4 84.57 52612100 84.57 5261210110 15 9.5 24 27 67 10 4 81.44 52611100 81.44 5261110112 26 11.5 35 39 84 12 4 134.11 52612120 134.11 5261212112 18 11.5 26 28 73 12 4 128.70 52611120 128.70 5261112116 32 15.5 40 45 93 16 4 211.97 52612160 211.97 5261216116 24 15.5 32 35 83 16 4 204.40 52611160 204.40 52611161
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 250+251● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 69
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 e8 l2 d3 l3 l1 d2 h6 Z 52 119 ... 52 119 ...
mm mm mm mm mm mm £ £3 4 2.7 14 50 3 4 33.22 521190304 5 3.7 16 50 4 4 35.60 521190405 6 4.6 18 54 5 4 39.81 521190506 7 5.5 21 54 6 4 49.83 521190608 9 7.4 27 63 8 4 60.99 52119080
10 11 9.2 32 72 10 4 84.60 5211910012 12 11.0 38 83 12 4 114.13 5211912014 14 13.0 40 83 14 4 165.27 5211914016 16 15.0 44 93 16 4 179.75 5211916018 18 16.5 47 93 18 4 237.99 5211918020 20 18.5 50 104 20 4 254.48 52119200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13 / 70 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard - With decreasing helix angle for reduced machining noise & vibration
l2
Ød2
Ød1
l1
l5
Ød3
l3
r
l5 with Shank DIN 6535 HB Ti 2000 Ti 2000
PG V1 PG V1Article no. Article no.
d1 e8 r ±0,01 l2 d3 l3 l5 l1 d2 h6 Z 52 140 ... 52 141 ...
mm mm mm mm mm mm mm mm £ £3 0.3 4 2.7 14 50 3 4 54.33 521400313 0.5 4 2.7 14 50 3 4 54.33 521400333 1.0 4 2.7 14 50 3 4 54.33 521400344 0.4 5 3.7 16 50 4 4 57.62 521400424 0.5 5 3.7 16 50 4 4 57.62 521400434 1.0 5 3.7 16 50 4 4 57.62 521400445 0.5 6 4.6 18 54 5 4 61.82 521400535 1.0 6 4.6 18 54 5 4 61.82 521400546 0.5 7 5.5 21 21 57 6 6 76.77 52140063 76.77 521410636 1.0 7 5.5 21 21 57 6 6 76.77 52140064 76.77 521410646 1.5 7 5.5 21 21 57 6 6 76.77 52140065 76.77 521410658 0.5 9 7.4 27 27 63 8 6 101.32 52140083 101.32 521410838 1.0 9 7.4 27 27 63 8 6 101.32 52140084 101.32 521410848 1.5 9 7.4 27 27 63 8 6 101.32 52140085 101.32 521410858 2.0 9 7.4 27 27 63 8 6 101.32 52140086 101.32 5214108610 0.5 11 9.2 32 32 72 10 6 130.16 52140103 130.16 5214110310 1.0 11 9.2 32 32 72 10 6 130.16 52140104 130.16 5214110410 1.5 11 9.2 32 32 72 10 6 130.16 52140105 130.16 5214110510 2.0 11 9.2 32 32 72 10 6 130.16 52140106 130.16 5214110612 0.5 12 11.0 38 38 83 12 6 175.82 52140123 175.82 5214112312 1.0 12 11.0 38 38 83 12 6 175.82 52140124 175.82 5214112412 1.5 12 11.0 38 38 83 12 6 175.82 52140125 175.82 5214112512 2.0 12 11.0 38 38 83 12 6 175.82 52140126 175.82 5214112616 1.0 16 15.0 44 45 93 16 6 296.72 52140161 296.72 5214116116 2.0 16 15.0 44 45 93 16 6 296.72 52140163 296.72 5214116320 1.0 20 18.5 50 54 104 20 6 420.93 52140201 420.93 5214120120 2.5 20 18.5 50 54 104 20 6 420.93 52140204 420.93 52141204
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 71
Solid carbide finish milling cutter, Factory Standard - With decreasing helix angle for reduced machining noise & vibration
l2
Ød2
Ød1
l1
l3l5
l5 with Shank DIN 6535 HB Ti 2000 Ti 2000 Ti 2000 Ti 2000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 e8 l2 l3 l5 l1 d2 h6 Z 52 133 ... 52 134 ... 52 135 ... 52 136 ...
mm mm mm mm mm mm £ £ £ £2 8 11 22 58 6 4 43.91 52133020 43.91 521340203 12 15 22 58 6 4 43.91 52133030 43.91 521340304 13 16 22 58 6 4 50.62 52133040 50.62 521340405 15 18 22 58 6 6 52.61 52133050 52.61 521340506 16 22 58 6 6 75.71 52133060 75.71 521340606 21 29 65 6 6 100.90 52135060 100.90 521360608 22 34 70 8 6 91.19 52133080 91.19 521340808 28 39 75 8 6 117.74 52135080 117.74 52136080
10 25 33 73 10 6 144.28 52133100 144.28 5213410010 35 45 85 10 6 194.79 52135100 194.79 5213610012 28 39 84 12 6 208.58 52133120 208.58 5213412012 45 55 100 12 6 273.09 52135120 273.09 5213612014 30 39 84 14 6 218.51 52133140 218.51 5213414014 45 55 100 14 6 309.47 52135140 309.47 5213614016 35 45 93 16 8 344.38 52133160 344.38 5213416016 50 62 110 16 8 445.17 52135160 445.17 5213616016 65 77 125 16 8 375.12 52135161 468.78 5213616118 35 45 93 18 10 361.22 52133180 361.22 5213418018 54 66 114 18 10 481.43 52135180 481.43 5213618020 40 54 104 20 10 498.27 52133200 498.27 5213420020 55 76 126 20 10 627.07 52135200 621.32 5213620020 70 85 135 20 10 750.23 52135201 750.23 52136201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ●
Solid Carbide milling cutters
13 / 72 toolingcenter.com
Solid carbide finish milling cutter with corner radius, Factory Standard
l2
Ød2
Ød1
l1
r
Ød3
l3
Ti 2000 Ti 2000 Ti 2000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 e8 r +/-0,005 l2 d3 l3 l1 d2 h6 Z 52 324 ... 52 325 ... 52 326 ...
mm mm mm mm mm mm mm £ £ £5 0.5 15 4.8 19 58 6 6 76.24 523240525 1.0 15 4.8 19 58 6 6 76.24 523240536 0.5 16 5.8 20 58 6 6 77.56 523240626 0.5 16 5.8 29 65 6 6 91.71 523250626 1.0 16 5.8 20 58 6 6 77.56 523240636 1.0 16 5.8 29 65 6 6 91.71 523250638 0.5 22 7.8 26 70 8 6 91.05 523240828 0.5 22 7.8 39 75 8 6 104.55 523250828 1.0 22 7.8 26 70 8 6 91.05 523240838 1.0 22 7.8 39 75 8 6 104.55 52325083
10 0.5 25 9.8 31 73 10 6 146.12 5232410210 0.5 25 9.8 45 85 10 6 160.93 5232510210 1.0 25 9.8 31 73 10 6 146.12 5232410310 1.0 25 9.8 45 85 10 6 164.99 5232510310 1.5 25 9.8 31 73 10 6 146.12 5232410410 1.5 25 9.8 45 85 10 6 160.93 5232510412 0.5 28 11.8 37 84 12 6 196.69 5232412212 0.5 28 11.8 55 100 12 6 236.18 5232512212 1.0 28 11.8 37 84 12 6 196.69 5232412312 1.0 28 11.8 55 100 12 6 236.18 5232512312 1.5 28 11.8 37 84 12 6 196.69 5232412412 1.5 28 11.8 55 100 12 6 236.18 5232512414 1.0 30 13.8 37 84 14 6 212.92 5232414314 1.0 30 13.8 55 100 14 6 264.81 5232514316 1.0 35 15.8 43 93 16 8 305.61 5232416316 1.0 35 15.8 62 110 16 8 386.57 5232516316 1.0 65 15.8 77 125 16 8 413.01 5232616316 2.0 35 15.8 43 93 16 8 305.61 5232416516 2.0 35 15.8 62 110 16 8 386.57 5232516516 2.0 65 15.8 77 125 16 8 413.01 5232616518 1.0 35 17.8 43 93 18 10 328.44 5232418318 1.0 35 17.8 66 114 18 10 426.72 5232518320 1.0 40 19.8 52 104 20 10 434.84 5232420320 1.0 40 19.8 76 126 20 10 569.21 5232520320 1.0 70 19.8 85 135 20 10 676.94 5232620320 2.0 40 19.8 52 104 20 10 434.84 5232420520 2.0 40 19.8 76 126 20 10 569.21 5232520520 2.0 70 19.8 85 135 20 10 676.94 52326205
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 73
13
Solid carbide finish milling cutter, Factory Standard
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB blank blank blank blank blank blank
PG V1 PG V1 PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 110 ... 52 110 ... 52 115 ... 52 115 ... 52 118 ... 52 118 ...mm mm mm mm mm mm mm mm £ £ £ £ £ £
5 8 4.8 13 18 54 6 0,02 6 36.32 52110051 36.32 521100505 13 4.8 18 22 58 6 0,02 6 38.44 52115051 38.44 521150506 10 5.8 15 18 54 6 0,03 6 36.07 52110061 36.07 521100606 16 5.8 20 22 58 6 0,03 6 38.91 52115061 38.91 521150606 21 29 65 6 0,03 6 56.95 52118061 56.95 521180607 12 6.8 17 23 59 8 0,04 6 43.30 52110071 43.30 521100707 22 6.8 30 34 70 8 0,04 6 45.09 52115071 45.09 521150707 25 39 75 8 0,04 6 70.12 52118071 70.12 521180708 12 7.8 17 23 59 8 0,04 6 43.19 52110081 43.19 521100808 22 7.8 32 34 70 8 0,04 6 46.03 52115081 46.03 521150808 28 39 75 8 0,04 6 64.25 52118081 64.25 521180809 14 8.8 19 20 60 10 0,04 6 66.92 52110091 66.92 521100909 25 8.8 33 33 73 10 0,04 6 74.40 52115091 74.40 521150909 30 45 85 10 0,04 6 131.82 52118091 131.82 5211809010 14 9.8 19 20 60 10 0,05 6 66.21 52110101 66.21 5211010010 25 9.8 33 33 73 10 0,05 6 78.06 52115101 78.06 5211510010 35 45 85 10 0,05 6 127.06 52118101 127.06 5211810012 16 11.8 21 25 70 12 0,05 6 96.46 52110121 96.46 5211012012 28 11.8 38 39 84 12 0,05 6 113.42 52115121 113.42 5211512012 45 55 100 12 0,05 6 177.96 52118121 177.96 5211812014 18 13.8 23 25 70 14 0,06 6 126.83 52110141 126.83 5211014014 30 13.8 38 39 84 14 0,06 6 149.01 52115141 149.01 5211514016 20 15.8 28 32 80 16 0,06 6 153.40 52110161 153.40 5211016016 35 15.8 43 45 93 16 0,06 6 171.86 52115161 171.86 5211516016 50 62 110 16 0,06 6 256.96 5211816016 65 110 16 0,06 6 251.88 5211816216 65 125 16 0,06 6 282.72 5211816316 65 77 125 16 0,06 6 256.96 5211816118 20 17.8 28 32 80 18 0,07 8 191.13 52110181 191.13 5211018018 35 17.8 43 45 93 18 0,07 8 214.34 52115181 214.34 5211518020 25 19.8 33 35 85 20 0,07 8 238.35 52110201 238.35 5211020020 40 19.8 45 50 100 20 0,07 8 267.00 52115201 267.00 5211520020 55 115 20 0,07 8 375.49 5211820220 55 65 115 20 0,07 8 383.32 5211820020 70 130 20 0,07 8 450.00 5211820320 70 80 130 20 0,07 8 383.32 5211820125 55 24.8 63 69 125 25 0,08 8 451.94 52115251 451.94 5211525025 75 94 150 25 0,08 8 776.35 52118251 673.38 52118250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ●
Solid Carbide milling cutters
13 / 74 toolingcenter.com
Solid carbide finish milling cutter, Factory Standard
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h6 K
Z 52 112 ... 52 112 ... 52 122 ... 52 122 ... 52 123 ... 52 123 ...mm mm mm mm mm mm mm mm £ £ £ £ £ £
5 8 4.8 13 18 54 6 0,02 6 54.58 52112051 54.58 521120505 13 4.8 18 22 58 6 0,02 6 57.63 52122051 57.63 521220506 10 5.8 15 18 54 6 0,03 6 51.08 52112061 51.08 521120606 16 5.8 20 22 58 6 0,03 6 56.39 52122061 56.39 521220606 21 29 65 6 0,03 6 76.72 52123061 76.72 521230607 12 6.8 17 23 59 8 0,04 6 68.25 52112071 68.25 521120707 22 6.8 30 34 70 8 0,04 6 71.76 52122071 71.76 521220707 25 39 75 8 0,04 6 94.02 52123071 94.02 521230708 12 7.8 17 23 59 8 0,04 6 63.73 52112081 63.73 521120808 22 7.8 32 34 70 8 0,04 6 70.40 52122081 70.40 521220808 28 39 75 8 0,04 6 95.14 52123081 95.14 521230809 14 8.8 19 20 60 10 0,04 6 99.66 52112091 99.66 521120909 25 8.8 33 33 73 10 0,04 6 112.09 52122091 112.09 521220909 30 45 85 10 0,04 6 170.27 52123091 170.27 5212309010 14 9.8 19 20 60 10 0,05 6 94.57 52112101 94.57 5211210010 25 9.8 33 33 73 10 0,05 6 111.52 52122101 111.52 5212210010 35 45 85 10 0,05 6 173.10 52123101 173.10 5212310012 16 11.8 21 25 70 12 0,05 6 142.14 52112121 142.14 5211212012 28 11.8 38 39 84 12 0,05 6 164.85 52122121 164.85 5212212012 45 55 100 12 0,05 6 238.52 52123121 238.52 5212312014 18 13.8 23 25 70 14 0,06 6 176.38 52112141 176.38 5211214014 30 13.8 38 39 84 14 0,06 6 207.00 52122141 207.00 5212214016 20 15.8 28 32 80 16 0,06 6 229.68 52112161 229.68 5211216016 35 15.8 43 45 93 16 0,06 6 251.96 52122161 251.96 5212216016 50 110 16 0,06 6 358.62 5212316216 50 62 110 16 0,06 6 351.39 5212316016 65 77 125 16 0,06 6 406.19 52123163 368.97 5212316118 20 17.8 28 32 80 18 0,07 8 263.60 52112181 263.60 5211218018 35 17.8 43 45 93 18 0,07 8 308.91 52122181 308.91 5212218020 25 19.8 33 35 85 20 0,07 8 334.78 52112201 328.80 5211220020 40 19.8 45 50 100 20 0,07 8 379.30 52122201 379.30 5212220020 55 65 115 20 0,07 8 511.83 52123202 501.55 5212320020 70 80 130 20 0,07 8 626.05 52123203 526.63 5212320125 55 24.8 63 69 125 25 0,08 8 633.17 52122251 633.17 5212225025 75 94 150 25 0,08 8 981.17 52123251 764.61 52123250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 75
13
Solid carbide multi-flute milling cutter for finishing, ≈ DIN 6527
l2
Ød2
Ød1
l1
l3
Ød3
Ti 1000
PG V1Article no.
d1 e8 l2 d3 l3 l1 d2 h6 Z 52 109 ...
mm mm mm mm mm mm £6 16 5.8 26 58 6 8 61.22 521090608 22 7.8 32 64 8 10 68.91 5210908010 25 9.8 35 73 10 12 120.54 5210910012 28 11.8 38 84 12 12 163.48 5210912016 35 15.8 43 93 16 16 350.46 5210916020 40 19.8 50 104 20 16 415.23 52109200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13 / 76 toolingcenter.com
Solid carbide milling cutter for roughing and finishing,≈ DIN 6527
l2
Ød2
Ød1
l1
l3l5
l5 with Shank DIN 6535 HB Ti 10 Ti 10 Ti 10 Ti 10
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 h10 l2 l3 l5 l1 d2 h6 Z 52 164 ... 52 165 ... 52 166 ... 52 167 ...
mm mm mm mm mm mm £ £ £ £4 8 11.5 18 54 6 2 57.31 52164040 57.31 521650404 13 17.0 22 58 6 2 68.09 52166040 68.09 521670405 9 12.5 18 54 6 2 55.76 52164050 57.31 521650505 15 18.0 22 58 6 2 68.09 52166050 68.09 521670506 10 18 54 6 2 55.52 52164060 48.53 521650606 16 22 58 6 2 68.09 52166060 68.09 521670608 12 23 59 8 2 63.36 52164080 58.84 521650808 22 28 64 8 2 77.05 52166080 77.05 52167080
10 14 27 67 10 2 78.20 52164100 93.89 5216510010 25 33 73 10 2 103.00 52166100 103.00 5216710012 16 28 73 12 2 108.33 52164120 125.53 5216512012 28 39 84 12 2 141.78 52166120 141.78 5216712016 22 35 83 16 2 161.47 52164160 203.95 5216516016 35 45 93 16 2 232.66 52166160 232.66 5216716020 26 43 93 20 2 263.62 52164200 307.43 5216520020 40 54 104 20 2 346.89 52166200 346.89 52167200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 77
13
Solid carbide rough milling cutter, Factory Standard - Cutting edges with irregular pitch
l2
Ød2
Ød1
l1Ød3
l3
K blank
PG V1Article no.
d1 h11 l2 d3 l3 l1 d2 h5 K
Z 52 754 ...mm mm mm mm mm mm mm £
6 8 5.6 20 57 6 0,28 3 200.26 527540608 10 7.6 25 63 8 0,43 3 229.92 5275408010 13 9.5 30 72 10 0,43 3 273.47 5275410012 15 11.4 35 83 12 0,43 3 349.40 5275412016 20 15.2 46 96 16 0,85 3 459.60 5275416020 25 19.0 58 110 20 0,85 3 683.58 5275420025 30 24.0 73 125 25 0,85 3 52754250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 281 ●
Solid carbide rough milling cutter, Factory Standard - Cutting edges with irregular pitch
l2
Ød2
Ød1
l1
l3
Ød3
rblank
PG V1Article no.
d1 h11 r ±0,15 l2 d3 l3 l1 d2 h5 Z 52 754 ...
mm mm mm mm mm mm mm £12 2 15 11.4 35 83 12 3 384.86 5275412616 2 20 15.2 46 96 16 3 506.94 5275416616 3 20 15.2 46 96 16 3 506.94 5275416820 2 25 19.0 58 110 20 3 752.62 5275420620 3 25 19.0 58 110 20 3 752.62 5275420820 4 25 19.0 58 110 20 3 752.62 5275420925 2 30 24.0 73 125 25 3 5275425625 3 30 24.0 73 125 25 3 5275425825 4 30 24.0 73 125 25 3 52754259
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 281 ●
Solid Carbide milling cutters
13 / 78 toolingcenter.com
Solid carbide milling cutter for roughing and finishing, DIN 6527
l2
Ød2
Ød1
l1
l5
KTiCN Ti 1002
PG V1 PG V1Article no. Article no.
d1 h10 l2 l5 l1 d2 h6 K
Z 52 300 ... 52 301 ...mm mm mm mm mm mm £ £
6 13 21 57 6 3 72.75 52300060 72.75 523010608 19 27 63 8 0,08 3 92.91 52300080 92.91 5230108010 22 32 72 10 0,12 4 102.16 52300100 102.16 5230110012 26 38 83 12 0,15 4 125.52 52300120 125.52 5230112014 26 38 83 14 0,17 4 176.60 52300140 176.60 5230114016 32 44 92 16 0,2 4 191.00 52300160 191.00 5230116018 32 48 96 18 0,22 4 276.07 52300180 276.07 5230118020 38 54 104 20 0,25 4 279.04 52300200 279.04 52301200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 79
13
Solid carbide rough milling cutter, DIN 6527 / Factory Standard - Cutting edges with irregular pitch
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 h11 l2 d3 l3 l5 l1 d2 h6 K
Z 52 752 ... 52 752 ... 52 752 ...mm mm mm mm mm mm mm mm £ £ £
1 1.5 0.9 3 38 3 0,09 3 137.98 52752010 1)
2 3.0 1.9 8 21 57 6 0,17 3 136.57 527520203 5.0 2.9 14 21 57 6 0,17 3 147.35 527520303 8.0 2.9 14 21 57 6 0,17 3 158.51 527520313 5.0 2.9 19 26 62 6 0,17 3 150.57 527520324 8.0 3.8 18 21 57 6 0,17 3 145.69 527520404 11.0 3.8 18 21 57 6 0,17 3 156.84 527520414 8.0 3.8 23 26 62 6 0,17 3 148.90 527520425 9.0 4.8 19 21 57 6 0,17 3 142.49 527520505 13.0 4.8 19 21 57 6 0,17 3 153.65 527520515 9.0 4.8 24 26 62 6 0,17 3 145.69 527520526 10.0 5.8 20 21 57 6 0,17 4 139.29 527520606 13.0 5.8 20 21 57 6 0,17 4 150.57 527520616 10.0 5.8 25 26 62 6 0,17 4 142.49 527520628 12.0 7.7 25 27 63 8 0,28 4 155.07 527520808 19.0 7.7 25 27 63 8 0,28 4 182.23 527520818 12.0 7.7 30 32 68 8 0,28 4 158.16 52752082
10 15.0 9.5 30 32 72 10 0,28 4 173.45 5275210010 22.0 9.5 30 32 72 10 0,28 4 191.00 5275210110 15.0 9.5 35 40 80 10 0,28 4 179.86 5275210212 18.0 11.5 35 38 83 12 0,28 4 213.20 5275212012 26.0 11.5 35 38 83 12 0,28 4 231.95 5275212112 18.0 11.5 45 48 93 12 0,28 4 223.99 5275212214 21.0 13.5 35 38 83 14 0,28 4 248.80 5275214014 26.0 13.5 35 38 83 14 0,28 4 259.47 5275214114 21.0 13.5 50 54 99 14 0,28 4 268.59 5275214216 24.0 15.5 40 44 92 16 0,43 4 348.55 5275216016 32.0 15.5 40 44 92 16 0,43 4 376.21 5275216116 24.0 15.5 55 60 108 16 0,43 4 374.78 5275216220 30.0 19.5 50 54 104 20 0,43 4 463.39 5275220020 38.0 19.5 50 54 104 20 0,43 4 494.48 5275220120 30.0 19.5 70 76 126 20 0,43 4 509.90 52752202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 268-271● ○ ● ○ ○ ○
1) DIN 6535 HA Shank
Solid Carbide milling cutters
13 / 80 toolingcenter.com
Solid carbide rough milling cutter, Factory Standard - with integrated chip breakers in the flutes
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 h11 l2 d3 l3 l5 l1 d2 h6 K
Z 52 340 ... 52 341 ...mm mm mm mm mm mm mm mm £ £
6 16 5.8 21 22 58 6 0,15 4 90.17 52340060 90.17 523410608 22 7.7 27 34 70 8 0,2 4 103.34 52340080 103.34 5234108010 25 9.7 30 33 73 10 0,2 4 111.99 52340100 111.99 5234110012 28 11.6 38 39 84 12 0,25 4 132.41 52340120 132.41 5234112014 30 13.6 40 39 84 14 0,3 4 177.25 52340140 177.25 5234114016 35 15.5 45 45 93 16 0,35 5 226.36 52340160 226.36 5234116018 35 17.5 45 45 93 18 0,4 5 281.18 52340180 281.18 5234118020 40 19.5 55 54 104 20 0,4 5 339.54 52340200 339.54 5234120025 50 24.0 65 69 125 25 0,5 5 571.71 52340250 571.71 52341250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 284-285○ ●
Solid carbide rough milling cutter, Factory Standard - with integrated chip breakers in the flutes
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 h11 l2 d3 l3 l5 l1 d2 h6 K
Z 52 338 ... 52 339 ...mm mm mm mm mm mm mm mm £ £
6 16 5.8 21 22 58 6 0,15 4 111.99 52338060 111.99 523390608 22 7.7 27 34 70 8 0,2 4 125.41 52338080 125.41 5233908010 25 9.7 30 33 73 10 0,2 4 147.11 52338100 147.11 5233910012 28 11.6 38 39 84 12 0,25 4 184.60 52338120 184.60 5233912014 30 13.6 40 39 84 14 0,25 4 243.92 52338140 243.92 5233914016 35 15.5 45 45 93 16 0,35 5 314.04 52338160 314.04 5233916018 35 17.5 45 45 93 18 0,35 5 369.68 52338180 369.68 5233918020 40 19.5 55 54 104 20 0,4 5 463.87 52338200 463.87 52339200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 282-283● ○ ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 81
13
Solid carbide rough milling cutter, Factory Standard - with integrated chip breakers in the flutes
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 h11 l2 d3 l3 l5 l1 d2 h6 K
Z 52 342 ... 52 343 ... 52 342 ... 52 343 ...mm mm mm mm mm mm mm mm £ £ £ £
6 8 6.0 18 54 6 0,15 4 78.22 52342060 78.22 523430606 16 5.8 21 22 58 6 0,15 4 100.36 52342061 100.36 523430618 11 8.0 23 59 8 0,2 4 91.48 52342080 91.48 523430808 22 7.7 27 34 70 8 0,2 4 114.97 52342081 114.97 52343081
10 13 10.0 27 67 10 0,2 4 96.02 52342100 96.02 5234310010 25 9.7 30 33 73 10 0,2 4 124.45 52342101 124.45 5234310112 16 12.0 29 74 12 0,25 4 112.60 52342120 112.60 5234312012 28 11.6 38 39 84 12 0,25 4 146.99 52342121 146.99 5234312114 16 14.0 30 75 14 0,25 4 156.84 52342140 156.84 5234314014 30 13.5 40 39 84 14 0,25 4 196.83 52342141 196.83 5234314116 19 16.0 36 84 16 0,35 5 195.75 52342160 195.75 5234316016 35 15.5 45 45 93 16 0,35 5 251.27 52342161 251.27 5234316118 19 18.0 32 80 18 0,35 5 252.35 52342180 252.35 5234318018 35 17.5 45 45 93 18 0,35 5 312.37 52342181 312.37 5234318120 19 20.0 43 93 20 0,4 5 298.37 52342200 298.37 5234320020 40 19.5 55 54 104 20 0,4 5 377.03 52342201 377.03 5234320125 50 24.0 65 69 125 25 0,5 5 562.58 52342251 562.58 52343251
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 282-283● ○ ● ○
Solid Carbide milling cutters
13 / 82 toolingcenter.com
Solid Carbide Ball Nosed Cutter 220°, Factory Standard - Radius accuracy: ± 0,005 mm
A B
220° 220°
Ød2 Ød2
l1 l1Ød3
l6l3Ød3
l2l2
Ød1Ød1
Ød4Ød4
l6
Ti 1000
PG V1Article no.
d1 f8 l2 d3 d4 l3 l6 l1 d2 h6 Z Fig. 52 323 ...
mm mm mm mm mm mm mm mm £1.0 0.7 0.85 0.8 5 17 58 6 2 A 119.59 523230101.5 1.2 1.25 1.2 8 20 58 6 2 A 119.59 523230152.0 1.5 1.70 1.4 10 21 58 6 2 A 119.59 523230203.0 2.3 2.70 2.4 15 22 65 6 2 A 120.78 523230304.0 3.0 3.70 3.4 20 25 70 6 2 A 123.51 523230405.0 3.5 4.70 4.3 25 28 80 6 2 B 128.60 523230506.0 4.0 5.90 4.3 30 100 6 2 B 148.77 523230608.0 5.4 7.90 6.2 40 100 8 2 B 197.18 52323080
10.0 6.7 9.90 7.6 50 100 10 2 B 259.11 5232310012.0 9.0 11.90 9.2 70 120 12 2 B 357.29 5232312012.0 9.0 11.90 9.2 110 160 12 2 B 380.20 52323121
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 83
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød2
Ød1
l1
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 ±0,01 l2 l1 d2 h5 Z 52 706 ... 52 708 ...
mm mm mm mm £ £1.0 4 40 4 2 74.74 527060101.5 4 40 4 2 74.74 527060152.0 4 50 6 2 74.74 527060202.0 4 60 6 2 74.74 527080203.0 5 50 6 2 74.74 527060303.0 5 60 6 2 74.74 527080304.0 8 54 6 2 74.74 527060404.0 8 75 6 2 98.47 527080405.0 9 54 6 2 74.74 527060505.0 9 75 6 2 104.65 527080506.0 10 54 6 2 98.47 527060606.0 10 100 6 2 122.09 527080607.0 11 58 8 2 98.47 527060707.0 11 100 8 2 133.24 527080708.0 12 58 8 2 90.20 527060808.0 12 100 8 2 133.24 52708080
10.0 14 66 10 2 112.70 5270610010.0 14 100 10 2 193.37 5270810012.0 16 73 12 2 172.74 5270612012.0 16 100 12 2 248.66 5270812014.0 18 75 14 2 204.29 5270614014.0 18 120 14 2 395.89 5270814016.0 22 82 16 2 243.92 5270616016.0 22 150 16 2 533.62 5270816018.0 24 84 18 2 299.44 5270618018.0 24 150 18 2 649.05 5270818020.0 26 92 20 2 402.30 5270620020.0 26 150 20 2 706.13 52708200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 84 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
BA
l2Ød1
l1Ød3
Ød2Ød2
l1
l6l3
l3
rrØd1
l2
Ød3
Ti 2000
PG V1Article no.
d1 l2 d3 l3 l6 l1 β°
d2 h5 Z 52 302 ...mm mm mm mm mm mm mm £1.0 1.00 0.95 10 16.5 57 9.0 6 2 A 147.43 523020101.5 1.25 1.40 12 18.0 57 7.5 6 2 A 135.04 523020152.0 1.50 1.90 16 20.0 57 6.0 6 2 A 108.16 523020203.0 2.00 2.90 20 34.5 80 2.5 6 2 A 130.21 523020304.0 2.50 3.90 22 35.0 80 2.0 6 2 A 122.43 523020405.0 3.00 4.90 25 35.0 80 1.0 6 2 A 119.69 523020506.0 3.50 5.90 29 80 6 2 B 114.86 52302060
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-249○ ●
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - Transition angle α = 15°
A Bl1
l6
l1
l2Ød1
Ød2 Ød2
l6 l2Ød1
Ti 1000
PG V1Article no.
d1 ±0,01 l2 l6 l1 β°
d2 h5 Z 52 741 ...mm mm mm mm mm £
2 1.5 3.3 38 9 3 2 A 103.69 527410203 2.0 7.5 57 12 6 2 A 90.20 527410304 2.5 6.0 57 9 6 2 A 88.16 527410405 3.0 5.0 57 6 6 2 A 88.16 527410506 3.5 57 6 2 B 109.15 527410608 4.5 63 8 2 B 139.51 5274108010 5.5 72 10 2 B 174.05 5274110012 6.5 83 12 2 B 220.19 52741120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13
toolingcenter.com 13 / 85
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0.005 mm for Ø ≤ 6.0 mm / ± 0.01 mm for Ø > 6,0 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
l2
Ød1
l1Ød3
Ød2
l3
l3
r
Ød2
l1
l6
r
l2Ød1
Ød3
Ti 2000
PG V1Article no.
d1
Tol. l2 d3 l3 l6 l1 α° β°
d2 h5 Z 52 303 ...mm mm mm mm mm mm mm £0.5 ±0,01 1.0 0.45 2.0 20 57 10.0 8.5 6 2 A 180.01 523030051.0 ±0,01 2.0 0.95 4.0 20 57 10.0 8.0 6 2 A 177.16 523030101.5 ±0,01 2.5 1.40 7.5 20 57 12.5 7.0 6 2 A 174.64 523030152.0 ±0,01 3.0 1.80 8.0 20 57 12.0 6.5 6 2 A 131.53 523030203.0 ±0,01 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 128.89 523030304.0 ±0,01 4.0 3.80 12.5 20 57 11.0 3.5 6 2 A 124.73 523030405.0 ±0,01 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 129.55 523030506.0 ±0,01 6.0 5.60 20.0 57 6 2 B 125.71 523030608.0 ±0,02 7.0 7.60 25.0 63 8 2 B 163.78 52303080
10.0 ±0,02 8.0 9.60 30.0 72 10 2 B 228.39 5230310012.0 ±0,02 10.0 11.50 35.0 83 12 2 B 284.89 5230312012.0 ±0,02 10.0 11.50 35.0 40 92 35.0 3.5 16 2 A 419.81 5230312116.0 ±0,02 12.0 15.50 40.0 92 16 2 B 410.59 52303160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-249○ ●
Solid Carbide milling cutters
13 / 86 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3
Ød4
l5
Ød2
l6Ød3
l5 with Shank DIN 6535 HB
Ti 2000 Ti 2000 Ti 2000 Ti 2000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 d3 d4 ±0,1 l3 l6 l5 l1 d2 h6 α° ±0,5 Z 52 256 ... 52 257 ... 52 258 ... 52 259 ...
mm mm mm mm mm mm mm mm mm £ £ £ £0.10 0.2 1.0 11.0 38 3 8.0 2 95.87 522569100.15 0.3 1.0 12.0 38 3 7.5 2 88.16 522569150.20 0.4 1.0 12.0 38 3 7.0 2 82.81 522569200.25 0.5 0.20 1.0 3.5 12.0 38 3 8.0 2 92.42 522569250.30 1.0 0.25 1.0 3.5 12.0 38 3 8.0 2 87.00 522569300.35 1.0 0.30 1.0 3.5 12.0 38 3 8.0 2 77.06 522569350.40 1.0 0.35 1.0 3.5 12.0 38 3 8.0 2 57.52 522569400.50 1.5 0.40 1.0 3.5 12.0 38 3 8.0 2 47.80 522569500.50 1.5 0.40 1.0 3.5 15.5 18 54 6 8.0 2 47.96 522560050.50 1.5 0.40 1.0 3.5 17.0 18 54 6 8.0 2 47.96 522570050.50 1.5 0.40 1.0 2.0 13.0 75 3 8.0 2 69.17 522589500.50 1.5 0.40 1.0 2.0 17.0 44 80 6 12.0 2 79.49 52258005 82.72 522590050.60 1.5 0.50 1.0 3.5 12.0 38 3 8.0 2 51.87 522569600.70 2.0 0.60 1.0 3.5 12.0 38 3 8.0 2 47.80 522569700.80 2.0 0.70 1.0 3.5 13.0 38 3 8.0 2 47.80 522569800.90 2.5 0.80 1.0 4.0 13.0 38 3 8.0 2 47.80 522569901.00 2.0 0.90 1.1 3.0 13.0 50 3 8.0 2 50.19 522560111.00 2.0 0.90 1.1 3.0 18.0 18 54 6 12.0 2 56.16 522561061.00 2.0 0.90 1.1 3.5 18.0 18 54 6 12.0 2 56.16 522570101.00 3.0 0.90 1.1 4.0 14.0 75 3 8.0 2 69.17 522580111.00 3.0 0.90 1.1 4.0 19.0 44 80 6 12.0 2 75.07 52258010 82.72 522590101.10 3.0 1.00 1.2 4.5 13.0 50 3 8.0 2 47.80 522569111.20 3.0 1.10 1.3 4.5 13.0 50 3 8.0 2 47.80 522560121.40 3.0 1.30 1.5 4.5 14.0 50 3 8.0 2 47.80 522560141.50 3.0 1.40 1.6 4.5 13.0 50 3 8.0 2 50.19 522560161.50 3.0 1.40 1.6 5.5 18.0 18 54 6 12.0 2 56.16 52256156 56.16 522570151.50 4.0 1.40 1.6 6.0 13.0 75 3 8.0 2 67.75 522580161.50 4.0 1.40 1.6 6.5 19.0 44 80 6 12.0 2 75.22 52258015 82.72 522590151.60 4.0 1.50 1.7 6.0 13.0 50 3 8.0 2 47.80 522569161.80 4.0 1.70 1.9 6.0 13.0 50 3 8.0 2 47.80 522560182.00 4.0 1.90 2.1 6.0 12.0 50 3 8.0 2 53.15 522560212.00 4.0 1.90 2.1 6.0 18.0 18 54 6 12.0 2 56.16 52256206 56.16 522570202.00 6.0 1.90 2.1 8.0 12.0 75 3 8.0 2 63.43 522580212.00 6.0 1.90 2.1 8.0 20.0 44 80 6 12.0 2 70.71 52258020 81.36 522590202.50 5.0 2.30 2.6 6.5 10.0 50 3 8.0 2 47.80 522560252.50 5.0 2.30 2.6 6.5 17.0 18 54 6 12.0 2 50.19 522560262.50 5.0 2.30 2.6 7.0 17.0 18 54 6 12.0 2 50.19 522570262.50 8.0 2.30 2.6 10.0 14.0 75 3 8.0 2 63.36 522580262.50 8.0 2.30 2.6 10.0 20.0 44 80 6 12.0 2 69.17 52258025 81.36 522590253.00 6.0 2.80 3.1 8.0 50 3 2 53.15 522560313.00 6.0 2.80 3.1 8.0 18.0 18 54 6 12.0 2 56.16 52256306 56.16 522570303.00 10.0 2.80 3.1 13.0 75 3 2 60.75 522580313.00 10.0 2.80 3.1 15.0 23.0 44 80 6 12.0 2 69.17 52258030 79.89 522590304.00 7.0 3.80 4.1 10.0 18.0 18 54 6 12.0 2 56.16 52256406 56.16 522570404.00 7.0 3.80 4.1 10.0 54 4 2 54.81 522560414.00 13.0 3.80 4.1 20.0 75 4 2 59.24 522580414.00 13.0 3.80 4.1 18.0 23.0 44 80 6 12.0 2 65.07 52258040 79.89 522590405.00 8.0 4.80 5.1 11.0 15.0 18 54 6 12.0 2 56.16 52256506 56.16 522570505.00 8.0 4.80 5.1 11.0 54 5 2 56.16 522560515.00 14.0 4.80 5.1 19.0 75 5 2 67.75 52258051
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 87
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3
Ød4
l5
Ød2
l6Ød3
l5 with Shank DIN 6535 HB
Ti 2000 Ti 2000 Ti 2000 Ti 2000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 d3 d4 ±0,1 l3 l6 l5 l1 d2 h6 α° ±0,5 Z 52 256 ... 52 257 ... 52 258 ... 52 259 ...
mm mm mm mm mm mm mm mm mm £ £ £ £5.00 14.0 4.80 5.1 19.0 21.0 64 100 6 12.0 2 75.22 52258050 79.89 522590506.00 10.0 5.80 15.0 18 54 6 2 56.16 52256061 56.16 522570606.00 16.0 5.80 25.0 64 100 6 2 84.18 52258060 84.18 522590608.00 12.0 7.80 17.0 23 59 8 2 68.70 52256081 68.70 522570808.00 22.0 7.80 35.0 64 100 8 2 100.90 52258080 100.90 52259080
10.00 13.0 9.80 18.0 27 67 10 2 89.71 52256101 89.71 5225710010.00 25.0 9.80 40.0 60 100 10 2 131.63 52258100 131.63 5225910012.00 16.0 11.90 21.0 28 73 12 2 127.45 52256121 127.45 5225712012.00 26.0 11.80 40.0 55 100 12 2 173.77 52258120 173.77 5225912014.00 16.0 13.80 21.0 30 75 14 2 161.12 52256141 161.12 5225714014.00 26.0 13.80 40.0 55 100 14 2 235.36 52258140 235.36 5225914016.00 20.0 15.80 25.0 35 83 16 2 184.74 52256161 184.74 5225716016.00 30.0 15.80 50.0 102 150 16 2 382.01 52258160 382.01 5225916020.00 25.0 19.80 30.0 43 93 20 2 302.36 52256201 302.36 5225720020.00 40.0 19.80 60.0 100 150 20 2 466.19 52258200 466.19 52259200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ●
Solid Carbide milling cutters
13 / 88 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
l2
Ød1
l1Ød3
Ød2
l3
l3
r
Ød2
l1
l6
r
l2Ød1
Ød3
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 ±0,01 l2 d3 l3 l6 l1 α° β°
d2 h5 Z 52 714 ... 52 717 ...mm mm mm mm mm mm mm £ £0.5 1.0 0.45 2.0 20 57 10.0 8.5 6 2 A 155.79 527140051.0 2.0 0.95 4.0 20 57 10.0 8.0 6 2 A 137.03 527140101.0 2.0 0.95 4.0 40 80 4.5 4.0 6 2 A 119.11 527170101.5 2.5 1.40 7.5 20 57 12.5 7.0 6 2 A 130.63 527140151.5 2.5 1.40 7.5 40 80 4.5 3.5 6 2 A 113.78 527170152.0 3.0 1.80 8.0 20 57 12.0 6.5 6 2 A 110.50 527140202.0 3.0 1.80 8.0 40 80 4.0 3.0 6 2 A 101.07 527170203.0 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 105.42 527140303.0 3.5 2.80 12.0 40 80 3.5 2.5 6 2 A 95.39 527170304.0 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 98.98 527140404.0 4.0 3.80 20.0 40 80 4.0 1.5 6 2 A 91.24 527170405.0 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 126.89 527140505.0 5.0 4.70 25.0 40 80 3.0 1.0 6 2 A 92.67 527170506.0 6.0 5.60 20.0 57 6 2 B 130.51 527140606.0 6.0 5.60 40.0 80 6 2 B 114.80 527170606.0 6.0 5.60 25.0 60 100 2.0 1.0 8 2 A 131.70 527170618.0 7.0 7.60 25.0 63 8 2 B 140.68 527140808.0 7.0 7.60 60.0 100 8 2 B 133.82 527170808.0 7.0 7.60 30.0 75 120 2.0 1.0 10 2 A 176.06 52717081
10.0 8.0 9.60 30.0 72 10 2 B 161.35 5271410010.0 8.0 9.60 50.0 100 10 2 B 155.18 5271710210.0 8.0 9.60 75.0 120 10 2 B 151.38 5271710010.0 8.0 9.60 40.0 110 160 1.0 1.0 12 2 A 233.95 5271710112.0 10.0 11.50 35.0 83 12 2 B 231.34 5271412012.0 10.0 11.50 35.0 40 92 35.0 3.5 16 2 A 297.30 5271412112.0 10.0 11.50 70.0 120 12 2 B 248.08 5271712212.0 10.0 11.50 70.0 160 12 2 B 258.40 5271712012.0 10.0 11.50 50.0 150 200 1.5 1.0 16 2 A 474.44 5271712116.0 12.0 15.50 40.0 92 16 2 B 292.92 5271416016.0 12.0 15.50 80.0 200 16 2 B 464.47 52717160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 89
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,01 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
l2
Ød1
l1Ød3
Ød2
l3
l3
r
Ød2
l1
l6
r
l2Ød1
Ød3
blank
PG V1Article no.
d1 e8 l2 d3 l3 l6 l1 α° β°
d2 h6 Z 52 320 ...mm mm mm mm mm mm mm £
2 3 1.8 8 40 100 3.6 3.0 6 2 A 81.04 523200203 4 2.8 12 40 100 3.1 2.1 6 2 A 81.04 523200304 5 3.8 16 40 100 2.4 1.2 6 2 A 78.22 523200405 6 4.7 20 40 100 1.4 0.7 6 2 A 78.67 523200506 6 5.7 25 50 100 2.3 1.2 8 2 A 108.33 523200616 6 5.7 25 100 6 2 B 66.23 523200608 7 7.7 32 100 8 2 B 100.50 523200808 7 7.7 32 60 120 2.0 1.0 10 2 A 151.03 5232008110 9 9.6 40 120 10 2 B 143.32 5232010010 9 9.6 40 81 160 1.4 0.7 12 2 A 243.21 5232010112 11 11.6 50 160 12 2 B 221.98 5232012012 11 11.6 50 101 200 2.3 1.2 16 2 A 419.02 5232012116 14 15.6 60 200 16 2 B 378.34 52320160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
13 / 90 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,01 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
l2
Ød1
l1Ød3
Ød2
l3
l3
r
Ød2
l1
l6
r
l2Ød1
Ød3
Ti 1000
PG V1Article no.
d1 e8 l2 d3 l3 l6 l1 α° β°
d2 h6 Z 52 321 ...mm mm mm mm mm mm mm £
2 3 1.8 8.0 40 100 3.6 3.0 6 2 A 108.09 523210203 4 2.8 12.0 40 100 3.1 2.1 6 2 A 108.09 523210304 5 3.8 16.5 40 100 2.4 1.2 6 2 A 106.54 523210405 6 4.7 20.0 40 100 1.4 0.7 6 2 A 105.36 523210506 6 5.7 25.0 50 100 2.3 1.2 8 2 A 144.26 523210616 6 5.7 25.0 100 6 2 B 91.37 523210608 7 7.7 32.0 100 8 2 B 135.72 523210808 7 7.7 32.0 60 120 2.0 1.0 10 2 A 195.04 5232108110 9 9.6 40.0 120 10 2 B 186.39 5232110010 9 9.6 40.0 80 160 1.4 0.7 12 2 A 304.42 5232110112 11 11.6 50.0 160 12 2 B 280.82 5232112012 11 11.6 50.0 100 200 2.3 1.2 16 2 A 527.23 5232112116 14 15.6 60.0 200 16 2 B 482.50 52321160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 91
13
Solid Carbide Ball Nosed Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
DIAMOND DIAMOND
PG V1 PG V1Article no. Article no.
d1 h10 l2 l3 d3 l1 d2 h6 Z 52 766 ... 52 768 ...
mm mm mm mm mm mm £ £0.5 1.5 38 3 2 133.24 527660051.0 2.0 38 3 2 129.55 527660102.0 3.0 38 3 2 129.55 527660202.0 3.0 50 6 2 198.73 527660212.0 8.0 31 1.8 60 2 2 156.84 527680203.0 5.0 38 3 2 129.55 527660303.0 5.0 50 6 2 198.73 527660313.0 12.0 41 2.8 70 3 2 146.99 527680304.0 8.0 54 6 2 198.73 527660404.0 15.0 51 3.8 80 4 2 207.74 527680405.0 9.0 54 6 2 198.73 527660505.0 20.0 71 4.8 100 5 2 240.83 527680506.0 10.0 54 6 2 195.28 527660606.0 20.0 63 5.8 100 6 2 266.81 527680608.0 12.0 58 8 2 267.88 527660808.0 20.0 83 7.8 120 8 2 354.72 52768080
10.0 14.0 66 10 2 340.61 5276610010.0 25.0 99 9.8 140 10 2 455.45 5276810012.0 25.0 104 11.8 150 12 2 598.16 52768120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13 / 92 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3l5
Ød2
l6
l5 with Shank DIN 6535 HB blank blank blank blank
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 l3 l6 l5 l1 α° ±0,5
d2 h6 Z 52 250 ... 52 250 ... 52 251 ... 52 251 ...mm mm mm mm mm mm mm £ £ £ £0.10 0.2 3.5 12.5 38 8 3 2 79.61 522509100.15 0.3 1.5 11.5 38 8 3 2 67.74 522509150.20 0.4 1.5 12.0 38 8 3 2 63.36 522509200.25 0.5 3.5 12.5 38 8 3 2 69.72 522509250.30 1.0 2.5 11.0 38 8 3 2 66.21 522509300.35 1.0 2.5 11.0 38 8 3 2 58.43 522509350.40 1.0 2.5 11.0 38 8 3 2 43.19 522509400.50 1.5 2.5 11.5 38 8 3 2 34.76 522509500.50 1.5 2.5 15.5 54 12 6 2 34.76 522509510.50 1.5 3.5 11.5 75 8 3 2 40.10 522510050.50 1.5 3.5 16.0 80 12 6 2 46.64 522510060.60 1.5 3.5 11.5 38 8 3 2 37.49 522509600.70 2.0 3.5 11.5 38 8 3 2 34.76 522509700.80 2.0 4.0 11.5 38 8 3 2 34.76 522509800.90 2.5 4.0 12.0 38 8 3 2 34.76 522509901.00 2.0 3.5 11.0 50 8 3 2 37.73 522500111.00 2.0 3.5 16.0 18 54 12 6 2 39.15 52250106 39.46 522500101.00 3.0 5.0 12.0 75 8 3 2 50.32 522510101.00 3.0 5.0 17.5 44 80 12 6 2 61.35 52251011 60.64 522516101.10 3.0 5.0 13.0 50 8 3 2 34.76 522509111.20 3.0 5.0 13.0 50 8 3 2 34.76 522500121.40 3.0 5.0 13.0 50 8 3 2 34.76 522500141.50 3.0 4.5 11.0 50 8 3 2 37.73 522500161.50 3.0 5.5 16.5 18 54 12 6 2 39.15 52250156 39.46 522500151.50 4.0 6.0 13.0 75 8 3 2 48.76 522510151.50 4.0 6.0 16.5 44 80 12 6 2 61.35 52251016 60.64 522516151.60 4.0 5.0 10.5 50 8 3 2 34.76 522509161.80 4.0 5.0 10.0 50 8 3 2 34.76 522500182.00 4.0 6.2 10.0 50 8 3 2 37.73 522500212.00 4.0 6.2 16.5 18 54 12 6 2 39.15 52250206 39.46 522500202.00 6.0 8.0 12.5 75 8 3 2 45.63 522510202.00 6.0 8.0 18.0 44 80 12 6 2 59.80 52251021 59.09 522516202.50 5.0 6.2 10.5 50 8 3 2 34.76 522500252.50 5.0 7.0 16.0 18 54 12 6 2 37.95 52250026 37.95 522500272.50 8.0 10.0 14.0 75 8 3 2 45.45 522510252.50 8.0 10.0 18.5 44 80 12 6 2 60.51 52251026 59.68 522516253.00 6.0 50 3 2 37.73 522500313.00 6.0 8.0 15.5 18 54 12 6 2 39.15 52250306 37.15 522500303.00 10.0 75 3 2 44.74 522510303.00 10.0 12.0 19.5 44 80 12 6 2 57.27 52251031 57.66 522516304.00 7.0 9.0 16.0 18 54 12 6 2 39.15 52250406 37.15 522500404.00 7.0 54 4 2 38.44 522500414.00 13.0 75 4 2 43.19 522510404.00 13.0 15.5 20.5 44 80 12 6 2 57.27 52251041 57.66 522516405.00 8.0 10.0 13.0 18 54 12 6 2 39.15 52250506 37.15 522500505.00 8.0 54 5 2 39.46 522500515.00 14.0 75 5 2 47.58 522510505.00 14.0 16.5 20.5 64 100 12 6 2 57.27 52251051 57.66 522516506.00 10.0 18 54 6 2 37.49 52250061 37.15 522500606.00 16.0 64 100 6 2 51.50 52251061 51.80 522510608.00 12.0 23 59 8 2 43.19 52250081 42.49 52250080
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 93
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3l5
Ød2
l6
l5 with Shank DIN 6535 HB blank blank blank blank
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 l3 l6 l5 l1 α° ±0,5
d2 h6 Z 52 250 ... 52 250 ... 52 251 ... 52 251 ...mm mm mm mm mm mm mm £ £ £ £8.00 22.0 64 100 8 2 60.16 52251081 61.46 52251080
10.00 13.0 27 67 10 2 54.58 52250101 54.94 5225010010.00 25.0 60 100 10 2 79.38 52251101 82.71 5225110012.00 16.0 28 73 12 2 79.38 52250121 80.44 5225012012.00 26.0 55 100 12 2 108.09 52251121 110.23 5225112014.00 16.0 30 75 14 2 104.17 52250141 104.29 5225014014.00 26.0 55 100 14 2 153.04 52251141 156.25 5225114016.00 20.0 35 83 16 2 113.48 52250161 115.92 5225016016.00 30.0 102 150 16 2 245.23 52251161 250.45 5225116020.00 25.0 43 93 20 2 199.91 52250201 201.21 5225020020.00 40.0 100 150 20 2 297.43 52251201 303.59 52251200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
13 / 94 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3l5
Ød2
l6
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 l3 l6 l5 l1 α° ±0,5°
d2 h6 Z 52 254 ... 52 254 ... 52 255 ... 52 255 ...mm mm mm mm mm mm mm £ £ £ £0.10 0.2 1.5 12.5 38 8 3 2 83.76 522549100.15 0.3 3.5 11.5 38 8 3 2 73.33 522549150.20 0.4 1.5 12.0 38 8 3 2 68.09 522549200.25 0.5 2.5 12.5 38 8 3 2 89.84 522549250.30 1.0 2.5 11.0 38 8 3 2 84.98 522549300.35 1.0 2.5 11.0 38 8 3 2 75.59 522549350.40 1.0 2.5 11.0 38 8 3 2 56.73 522549400.50 1.5 3.5 11.5 38 8 3 2 47.35 522549500.50 1.5 3.5 15.5 54 12 6 2 43.07 522549510.50 1.5 3.5 11.5 75 8 3 2 46.09 522550050.50 1.5 3.5 16.0 80 12 6 2 70.12 522550060.60 1.5 3.5 11.5 38 8 3 2 51.97 522549600.70 2.0 3.5 11.5 38 8 3 2 47.35 522549700.80 2.0 4.0 11.5 38 8 3 2 47.35 522549800.90 2.5 4.0 12.0 38 8 3 2 47.35 522549901.00 2.0 3.5 11.0 50 8 3 2 52.55 522540111.00 2.0 3.5 16.0 18 54 12 6 2 53.45 52254106 57.86 522540101.00 3.0 5.0 12.0 75 8 3 2 67.35 522550101.00 3.0 5.0 17.5 44 80 12 6 2 73.55 52255011 73.91 522556101.10 3.0 5.0 13.0 50 8 3 2 48.82 522549111.20 3.0 5.0 13.0 50 8 3 2 48.82 522540121.40 3.0 5.0 13.0 50 8 3 2 48.82 522540141.50 3.0 4.5 11.0 50 8 3 2 52.55 522540161.50 3.0 5.5 16.5 18 54 12 6 2 53.45 52254156 57.86 522540151.50 4.0 6.0 13.0 75 8 3 2 66.67 522550151.50 4.0 6.0 16.5 44 80 12 6 2 73.55 52255016 73.91 522556151.60 4.0 5.0 10.5 50 8 3 2 48.82 522549161.80 4.0 5.0 10.0 50 8 3 2 48.82 522540182.00 4.0 6.2 10.0 50 8 3 2 52.55 522540212.00 4.0 6.2 16.5 18 54 12 6 2 53.45 52254206 57.86 522540202.00 6.0 8.0 12.5 75 8 3 2 62.93 522550202.00 6.0 8.0 18.0 44 80 12 6 2 73.20 52255021 72.26 522556202.50 5.0 6.2 10.5 50 8 3 2 48.82 522540252.50 5.0 7.0 16.0 18 54 12 6 2 50.68 52254026 50.68 522540272.50 8.0 10.0 14.0 75 8 3 2 61.58 522550252.50 8.0 10.0 18.5 44 80 12 6 2 72.39 52255026 71.59 522556253.00 6.0 50 3 2 52.55 522540313.00 6.0 8.0 15.5 18 54 12 6 2 53.45 52254306 53.79 522540303.00 10.0 75 3 2 60.90 522550303.00 10.0 12.0 19.5 44 80 12 6 2 70.42 52255031 70.83 522556304.00 7.0 9.0 13.0 18 54 12 6 2 53.45 52254406 53.79 522540404.00 7.0 54 4 2 55.37 522540414.00 13.0 75 4 2 60.12 522550404.00 13.0 15.5 20.5 44 80 12 6 2 70.42 52255041 70.83 522556405.00 8.0 10.0 13.0 18 54 12 6 2 53.45 52254506 53.79 522540505.00 8.0 54 5 2 57.86 522540515.00 14.0 75 5 2 66.22 522550505.00 14.0 16.5 20.5 64 100 12 6 2 70.42 52255051 70.83 522556506.00 10.0 18 54 6 2 53.68 52254061 53.79 522540606.00 16.0 64 100 6 2 78.07 52255061 80.11 522550608.00 12.0 23 59 8 2 64.63 52254081 65.43 52254080
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 95
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3l5
Ød2
l6
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 l3 l6 l5 l1 α° ±0,5°
d2 h6 Z 52 254 ... 52 254 ... 52 255 ... 52 255 ...mm mm mm mm mm mm mm £ £ £ £8.00 22.0 64 100 8 2 93.89 52255081 96.39 52255080
10.00 13.0 27 67 10 2 84.98 52254101 85.43 5225410010.00 25.0 60 100 10 2 127.45 52255101 126.55 5225510012.00 16.0 28 73 12 2 121.24 52254121 121.92 5225412012.00 26.0 55 100 12 2 163.05 52255121 167.33 5225512014.00 16.0 30 75 14 2 154.12 52254141 154.23 5225414014.00 26.0 55 100 14 2 220.44 52255141 226.21 5225514016.00 20.0 35 83 16 2 176.26 52254161 177.62 5225416016.00 30.0 102 150 16 2 358.06 52255161 367.32 5225516018.00 22.0 43 93 18 2 274.24 52254181 274.24 5225418020.00 25.0 43 93 20 2 289.24 52254201 290.04 5225420020.00 40.0 100 150 20 2 437.03 52255201 448.11 52255200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 96 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
l2Ød1
l1Ød3l3
rØd1
Ød3
Ød2Ød2
r
l2l3l6
l1
blank blank
PG V1 PG V1Article no. Article no.
d1 ±0,01 l2 d3 l3 l6 l1 α° β°
d2 h5 Z 52 718 ... 52 720 ...mm mm mm mm mm mm mm £ £0.5 1.0 0.45 2.0 9 38 10.0 8.0 3 2 A 146.88 527180051.0 2.0 0.95 4.0 9 38 12.5 6.5 3 2 A 128.97 527180101.5 2.5 1.40 7.5 9 38 32.0 5.0 3 2 A 113.78 527180152.0 3.0 1.80 8.0 9 38 31.0 3.5 3 2 A 88.74 527180203.0 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 101.24 527180303.0 3.5 2.80 12.0 40 80 3.5 2.5 6 2 A 94.20 527200304.0 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 96.49 527180404.0 4.0 3.80 20.0 40 80 4.0 1.5 6 2 A 97.64 527200405.0 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 104.29 527180505.0 5.0 4.70 10.0 40 100 1.5 1.0 6 2 A 126.44 527200506.0 6.0 5.60 20.0 57 6 2 B 136.04 527180606.0 6.0 5.60 40.0 100 6 2 B 127.79 527200608.0 7.0 7.60 25.0 63 8 2 B 148.46 527180808.0 7.0 7.60 60.0 120 8 2 B 137.62 52720080
10.0 8.0 9.60 30.0 72 10 2 B 161.11 5271810010.0 8.0 9.60 60.0 120 10 2 B 154.83 5272010012.0 8.0 11.50 40.0 83 12 2 B 268.36 5271812012.0 10.0 11.50 70.0 160 12 2 B 260.89 52720120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 97
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
l2Ød1
l1Ød3l3
rØd1
Ød3
Ød2Ød2
r
l2l3l6
l1
Ti 1000
PG V1Article no.
d1 ±0,01 l2 d3 l3 l6 l1 α° β°
d2 h5 Z 52 790 ...mm mm mm mm mm mm mm £0.5 1.0 0.45 2.0 9 38 10.0 8.0 3 2 A 152.93 527900051.0 2.0 0.95 4.0 9 38 12.5 6.5 3 2 A 135.14 527900101.5 2.5 1.40 7.5 9 38 32.0 5.0 3 2 A 120.43 527900152.0 3.0 1.80 8.0 9 38 31.0 3.5 3 2 A 96.34 527900203.0 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 92.67 527900304.0 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 89.03 527900405.0 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 88.87 527900506.0 6.0 5.60 20.0 57 6 2 B 83.41 527900608.0 7.0 7.60 25.0 63 8 2 B 100.14 52790080
10.0 8.0 9.60 30.0 72 10 2 B 170.25 5279010012.0 8.0 11.50 40.0 83 12 2 B 209.04 52790120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
13 / 98 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød2
Ød1
l1
l5
blank blank
PG V1 PG V1Article no. Article no.
d1 f8 l2 l5 l1 d2 h6 Z 52 260 ... 52 261 ...
mm mm mm mm mm £ £3 6 50 3 2 38.34 52260030 1)
3 10 75 3 2 43.65 52261030 1)
4 7 54 4 2 39.01 52260040 1)
4 13 75 4 2 47.96 52261040 1)
5 8 54 5 2 39.46 52260050 1)
5 15 75 5 2 51.86 52261050 1)
6 10 18 54 6 2 41.29 522600606 16 64 100 6 2 55.76 522610608 12 23 59 8 2 46.44 522600808 22 64 100 8 2 65.96 52261080
10 13 27 67 10 2 61.46 5226010010 25 60 100 10 2 88.98 5226110012 16 28 73 12 2 86.26 5226012012 26 55 100 12 2 117.10 5226112014 16 30 75 14 2 111.42 5226014014 26 55 100 14 2 167.28 5226114016 20 35 83 16 2 127.54 5226016016 30 102 150 16 2 270.74 5226116020 25 43 93 20 2 218.77 5226020020 40 100 150 20 2 326.74 52261200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ●
1) DIN 6535 HA Shank
Solid Carbide milling cutters
toolingcenter.com 13 / 99
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød2
Ød1
l1
l5
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 f8 l2 l5 l1 d2 h6 Z 52 264 ... 52 265 ...
mm mm mm mm mm £ £3 6 50 3 2 50.78 52264030 1)
3 10 75 3 2 57.66 52265030 1)
4 7 54 4 2 54.23 52264040 1)
4 13 75 4 2 61.11 52265040 1)
5 8 54 5 2 55.52 52264050 1)
5 15 75 5 2 73.91 52265050 1)
6 10 18 54 6 2 55.75 522640606 16 64 100 6 2 78.20 522650608 12 23 59 8 2 67.75 522640808 22 64 100 8 2 94.67 52265080
10 13 27 67 10 2 85.79 5226410010 25 60 100 10 2 124.94 5226510012 16 28 73 12 2 115.79 5226412012 26 55 100 12 2 163.61 5226512014 16 30 75 14 2 145.69 5226414014 26 55 100 14 2 224.11 5226514016 20 35 83 16 2 175.94 5226416016 30 102 150 16 2 364.68 5226516020 25 43 93 20 2 293.04 5226420020 40 100 150 20 2 442.98 52265200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ● ○
1) DIN 6535 HA Shank
Solid Carbide milling cutters
13 / 100 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l3l5
Ød2
l6
l5 with Shank DIN 6535 HB Ti 2000 Ti 2000 Ti 2000 Ti 2000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 l3 l6 l5 l1 α° ±1°
d2 h6 Z 52 404 ... 52 405 ... 52 404 ... 52 405 ...mm mm mm mm mm mm mm £ £ £ £2.0 4 6.5 10.0 50 8 3 4 45.63 524040202.0 4 6.5 16.0 18 54 12 6 4 55.05 52404021 55.05 524050212.0 4 6.5 10.0 75 8 3 4 59.95 524040222.0 4 6.5 16.0 44 80 12 6 4 78.57 52404023 78.57 524050232.5 5 7.5 16.0 18 54 12 6 4 55.05 52404025 55.05 524050252.5 5 7.5 16.0 44 80 12 6 4 73.90 52404026 73.90 524050263.0 5 50 3 4 49.48 524040303.0 5 7.0 14.0 18 54 12 6 4 52.96 52404031 52.96 524050313.0 5 75 3 4 62.17 524040323.0 5 7.0 14.0 44 80 12 6 4 77.84 52404033 77.84 524050334.0 8 10.0 15.0 18 54 12 6 4 52.96 52404041 52.96 524050414.0 8 54 4 4 50.28 524040404.0 8 75 4 4 69.72 524040424.0 8 10.0 15.0 44 80 12 6 4 77.12 52404043 77.12 524050435.0 9 11.0 13.5 18 54 12 6 4 52.26 52404051 52.26 524050515.0 9 54 5 4 51.02 524040505.0 9 75 5 4 70.42 524040525.0 9 11.0 13.5 64 100 12 6 4 75.69 52404053 75.69 524050536.0 10 18 54 6 4 53.15 52404060 53.15 524050606.0 10 64 100 6 4 74.27 52404062 74.27 524050627.0 12 13.0 15.0 23 59 12 8 4 72.14 52404070 72.14 524050708.0 12 23 59 8 4 66.21 52404080 66.21 524050808.0 12 64 100 8 4 94.80 52404082 94.80 524050829.0 14 15.0 17.0 27 67 12 10 4 96.34 52404090 96.34 5240509010.0 14 16.0 27 67 10 4 89.69 5240510010.0 14 27 67 10 4 89.69 5240410010.0 14 60 100 10 4 122.32 52404102 122.32 5240510212.0 16 29 74 12 4 120.65 52404120 120.65 5240512012.0 16 55 100 12 4 157.08 52404122 157.08 5240512214.0 18 30 75 14 4 150.92 52404140 150.92 5240514014.0 18 55 100 14 4 198.12 5240414214.0 18 20.0 55 100 14 4 198.12 5240514216.0 22 24.0 35 83 16 4 188.28 5240516016.0 22 35 83 16 4 188.28 5240416016.0 22 102 150 16 4 306.09 5240416216.0 22 24.0 102 150 16 4 306.09 5240516220.0 26 28.0 43 93 20 4 289.96 5240520020.0 26 43 93 20 4 289.96 5240420020.0 26 100 150 20 4 422.70 5240420220.0 26 28.0 100 150 20 4 422.70 52405202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 101
13
Solid Carbide Ball Nosed Cutter, Factory Standard
l2
Ød1
l1
l5
Ød2
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 h10 l2 l5 l1 d2 h6 Z 52 788 ... 52 789 ...
mm mm mm mm mm £ £2 6 40 2 4 64.67 527880203 10 40 3 4 64.67 527880304 11 40 4 4 64.67 527880405 13 50 5 4 64.67 527880506 13 21 57 6 4 59.56 52788060 59.56 527890608 19 27 63 8 4 75.13 52788080 75.13 5278908010 22 32 72 10 4 123.85 52788100 123.85 5278910012 26 38 83 12 4 165.46 52788120 165.46 5278912014 26 38 83 14 4 205.25 52788140 205.25 5278914016 32 44 92 16 4 283.38 52788160 283.38 52789160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 102 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,005 mm
l2
Ød1
l1
l5
Ød2
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1 PG V1Article no. Article no. Article no. Article no.
d1 f8 l2 l5 l1 d2 h6 Z 52 400 ... 52 401 ... 52 402 ... 52 403 ...
mm mm mm mm mm £ £ £ £3 5 50 3 4 47.82 524000303 5 75 3 4 57.78 524020304 8 54 4 4 47.96 524000404 8 75 4 4 64.25 524020405 9 54 5 4 50.19 524000505 9 75 5 4 66.80 524020506 10 18 54 6 4 52.91 52400060 52.91 524010606 10 64 100 6 4 68.58 52402060 68.58 524030608 12 23 59 8 4 65.38 52400080 65.38 524010808 12 64 100 8 4 86.73 52402080 86.73 52403080
10 14 27 67 10 4 86.71 52400100 86.71 5240110010 14 60 100 10 4 110.46 52402100 110.46 5240310012 16 29 74 12 4 111.17 52400120 111.17 5240112012 16 55 100 12 4 142.60 52402120 142.60 5240312014 18 30 75 14 4 139.04 52400140 139.04 5240114014 18 55 100 14 4 175.47 52402140 175.47 5240314016 22 35 83 16 4 182.46 52400160 182.46 5240116016 22 102 150 16 4 262.07 52402160 262.07 5240316020 26 43 93 20 4 279.75 52400200 279.75 5240120020 26 100 150 20 4 386.88 52402200 386.88 52403200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 103
13
Solid Carbide Torus Cutter, Factory Standard - Radius accuracy: ± 0,005 mm for Ø ≤ 6,0 mm / ± 0,01 mm for Ø > 6,0 mm - or Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
Ti 2000 Ti 2000
PG V1 PG V1Article no. Article no.
d1
Tol. r l2 d3 l3 l6 l1 α° β°
d2 h5 Z Fig. 52 304 ... 52 304 ...mm mm mm mm mm mm mm mm £ £0.5 ±0,01 0.10 1.0 0.45 2.0 20 57 10.0 8.5 6 2 A 169.37 523040051.0 ±0,01 0.25 2.0 0.95 4.0 20 57 10.0 8.0 6 2 A 165.86 523040101.5 ±0,01 0.30 2.5 1.40 7.5 20 57 12.5 7.0 6 2 A 152.70 523040152.0 ±0,01 0.50 3.0 1.80 8.0 20 57 12.0 6.5 6 2 A 123.09 523040203.0 ±0,01 0.50 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 120.66 523040304.0 ±0,01 1.00 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 117.27 523040405.0 ±0,01 1.50 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 122.10 523040506.0 ±0,01 2.00 6.0 5.60 20.0 57 6 2 B 121.65 523040608.0 ±0,02 2.00 7.0 7.60 25.0 63 8 2 B 156.65 5230408010.0 ±0,02 3.00 8.0 9.60 30.0 72 10 2 B 209.52 5230410012.0 ±0,02 4.00 10.0 11.50 35.0 83 12 2 B 279.07 5230412012.0 ±0,02 4.00 10.0 11.50 35.0 40 92 37.0 3.5 16 2 A 404.67 5230412116.0 ±0,02 5.00 12.0 15.50 40.0 92 16 2 B 395.56 52304160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-249○ ●
Solid Carbide milling cutters
13 / 104 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Radius accuracy: ± 0,005 mm for Ø ≤ 6,0 mm / ± 0,01 mm for Ø > 6,0 mm - or Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
Ti 2000 Ti 2000
PG V1 PG V1Article no. Article no.
d1
Tol. r l2 d3 l3 l6 l1 β°
d2 h5 Z Fig. 52 305 ... 52 305 ...mm mm mm mm mm mm mm mm £ £1.0 ±0,01 0.2 1.00 0.95 10 16.5 57 9.0 6 2 A 163.78 523050101.5 ±0,01 0.3 1.25 1.40 12 18.0 57 7.5 6 2 A 147.10 523050152.0 ±0,01 0.4 1.50 1.90 16 20.0 57 6.0 6 2 A 120.45 523050203.0 ±0,01 0.5 2.00 2.90 20 34.5 80 2.5 6 2 A 143.05 523050304.0 ±0,01 0.6 2.50 3.90 22 35.0 80 2.0 6 2 A 135.48 523050405.0 ±0,01 0.8 3.00 4.90 25 35.0 80 1.0 6 2 A 133.40 523050506.0 ±0,01 1.0 3.50 5.90 29 80 6 2 B 125.17 52305060
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-249○ ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 105
Solid Carbide Torus Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 ±0,01 r l2 d3 l3 l6 l1 α° β°
d2 h5 Z Fig. 52 730 ... 52 734 ...mm mm mm mm mm mm mm mm £ £0.5 0.10 1.0 0.45 2.0 20 57 10.0 8.5 6 2 A 171.21 527300051.0 0.25 2.0 0.95 4.0 20 57 10.0 8.0 6 2 A 137.03 527300101.0 0.25 2.0 0.95 4.0 40 80 4.5 4.0 6 2 A 130.63 527340101.5 0.30 2.5 1.40 7.5 20 57 12.5 7.0 6 2 A 130.63 527300151.5 0.30 2.5 1.40 7.5 40 80 4.5 3.5 6 2 A 123.51 527340152.0 0.50 3.0 1.80 8.0 20 57 12.0 6.5 6 2 A 116.03 527300202.0 0.50 3.0 1.80 8.0 40 80 4.0 3.0 6 2 A 108.09 527340203.0 0.50 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 110.69 527300303.0 0.50 3.5 2.80 12.0 40 80 3.5 2.5 6 2 A 102.51 527340304.0 0.50 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 101.92 527300414.0 0.50 4.0 3.80 20.0 40 80 4.0 1.5 6 2 A 121.14 527340414.0 1.00 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 103.93 527300404.0 1.00 4.0 3.80 20.0 40 80 4.0 1.5 6 2 A 115.21 527340405.0 1.00 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 100.02 527300515.0 1.00 5.0 4.70 25.0 40 80 3.0 1.0 6 2 A 119.11 527340515.0 1.50 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 126.89 527300505.0 1.50 5.0 4.70 25.0 40 80 3.0 1.0 6 2 A 128.49 527340506.0 1.00 6.0 5.60 20.0 57 6 2 B 93.26 527309616.0 1.00 6.0 5.60 40.0 80 6 2 B 113.42 527349616.0 2.00 6.0 5.60 20.0 57 6 2 B 130.51 527300606.0 2.00 6.0 5.60 40.0 80 6 2 B 124.40 527340606.0 2.00 6.0 5.60 25.0 60 100 2.0 1.0 8 2 A 141.41 527340618.0 1.00 7.0 7.60 25.0 63 8 2 B 128.84 527300828.0 1.00 7.0 7.60 60.0 100 8 2 B 149.96 527340828.0 2.00 7.0 7.60 25.0 63 8 2 B 140.68 527300808.0 2.00 7.0 7.60 60.0 100 8 2 B 144.16 527340808.0 2.00 7.0 7.60 30.0 75 120 2.0 1.0 10 2 A 190.29 527340818.0 2.50 7.0 7.60 60.0 100 8 2 B 153.65 5273408310.0 1.50 8.0 9.60 30.0 72 10 2 B 190.53 5273010210.0 1.50 8.0 9.60 75.0 120 10 2 B 205.85 5273410210.0 2.50 8.0 9.60 75.0 120 10 2 B 210.93 5273410410.0 3.00 8.0 9.60 30.0 72 10 2 B 161.35 5273010010.0 3.00 8.0 9.60 50.0 100 10 2 B 194.22 5273410310.0 3.00 8.0 9.60 75.0 120 10 2 B 195.75 5273410010.0 3.00 8.0 9.60 40.0 110 160 1.0 0.5 12 2 A 298.97 5273410112.0 1.50 10.0 11.50 35.0 83 12 2 B 232.52 5273012212.0 1.50 10.0 11.50 70.0 160 12 2 B 301.10 5273412212.0 4.00 10.0 11.50 35.0 83 12 2 B 231.34 5273012012.0 4.00 10.0 11.50 35.0 40 92 37.0 3.5 16 2 A 297.30 5273012112.0 4.00 10.0 11.50 70.0 160 12 2 B 268.02 5273412012.0 4.00 10.0 11.50 50.0 150 200 1.5 1.0 16 2 A 495.67 5273412116.0 5.00 12.0 15.50 40.0 92 16 2 B 292.92 5273016016.0 5.00 12.0 15.50 80.0 200 16 2 B 485.82 52734160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 106 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - for Ø ≤ 5,0 mm, angle tolerance α and β: ±0,5°
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
blank
PG V1Article no.
d1 e8 r +/-0,01 l2 d3 l3 l6 l1 α° β°
d2 h6 Z Fig. 52 330 ...mm mm mm mm mm mm mm mm £
2 0.5 2 1.8 8 40 100 3.6 3.0 6 2 A 84.60 523300203 0.5 2 2.8 12 40 100 3.1 2.2 6 2 A 84.60 523300304 1.0 3 3.8 16 40 100 2.4 1.5 6 2 A 81.71 523300406 2.0 4 5.8 25 100 6 2 B 70.47 523300606 2.0 4 5.8 25 50 100 2.3 1.2 8 2 A 112.95 523300618 2.0 4 7.8 32 100 8 2 B 103.00 523300808 2.0 4 7.8 32 60 120 2.0 1.0 10 2 A 157.55 5233008110 3.0 6 9.8 40 120 10 2 B 149.48 5233010010 3.0 6 9.8 40 80 160 1.4 0.7 12 2 A 253.64 5233010112 1.5 8 11.8 50 160 12 2 B 231.24 5233012312 4.0 8 11.8 50 160 12 2 B 231.24 5233012012 4.0 8 11.8 50 100 200 2.3 1.2 16 2 A 436.95 5233012116 5.0 8 15.5 60 200 16 2 B 396.96 52330160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 107
13
Solid Carbide Torus Cutter, Factory Standard - for Ø ≤ 5,0 mm, angle tolerance α and β: ±0,5°
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
Ti 1000
PG V1Article no.
d1 e8 r ±0,01 l2 d3 l3 l6 l1 α° β°
d2 h6 Z Fig. 52 331 ...mm mm mm mm mm mm mm mm £
2 0.5 2 1.8 8 40 100 3.6 3.0 6 2 A 119.88 523310203 0.5 2 2.8 12 40 100 3.1 2.2 6 2 A 119.88 523310304 1.0 3 3.8 16 40 100 2.4 1.5 6 2 A 118.41 523310406 2.0 4 5.8 25 100 6 2 B 103.39 523310606 2.0 4 5.8 25 50 100 2.3 1.2 8 2 A 160.34 523310618 2.0 4 7.8 32 100 8 2 B 150.73 523310808 2.0 4 7.8 32 60 120 2.0 1.0 10 2 A 216.60 5233108110 3.0 6 9.8 40 120 10 2 B 207.11 5233110010 3.0 6 9.8 40 80 160 1.4 0.7 12 2 A 338.28 5233110112 1.5 8 11.8 50 160 12 2 B 312.08 5233112312 4.0 8 11.8 50 160 12 2 B 312.08 5233112012 4.0 8 11.8 50 100 200 2.3 1.2 16 2 A 585.72 5233112116 5.0 8 15.5 60 200 16 2 B 539.29 52331160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 108 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
DIAMOND
PG V1Article no.
d1 h10 r l2 d3 l3 l1 d2 h6 Z 52 765 ...
mm mm mm mm mm mm mm £2 0.3 8 1.8 31 60 2 2 167.75 527650213 0.5 12 2.8 41 70 3 2 178.19 527650324 0.5 15 3.8 51 80 4 2 218.30 527650425 0.5 20 4.8 71 100 5 2 253.17 527650526 0.8 20 5.8 63 100 6 2 279.04 527650638 1.0 20 7.8 83 120 8 2 367.07 5276508410 1.0 25 9.8 99 140 10 2 469.44 5276510412 1.5 25 11.8 104 150 12 2 620.70 52765125
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 109
Solid Carbide Torus Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
blank
PG V1Article no.
d1 e8 r ±0,01 l2 d3 l3 l1 d2 h6 Z 52 332 ...
mm mm mm mm mm mm mm £3 0.3 4 2.7 14 50 3 2 37.15 523320314 0.3 5 3.7 16 50 4 2 39.62 523320415 0.3 6 4.6 18 54 5 2 42.60 523320516 0.3 7 5.5 21 57 6 2 48.65 523320616 1.0 7 5.5 21 57 6 2 48.65 523320646 2.0 7 5.5 21 57 6 2 48.65 523320668 0.3 9 7.4 27 63 8 2 62.26 523320818 1.0 9 7.4 27 63 8 2 62.26 523320848 2.0 9 7.4 27 63 8 2 62.26 5233208610 0.3 11 9.2 32 72 10 2 85.54 5233210110 1.5 11 9.2 32 72 10 2 85.54 5233210510 3.0 11 9.2 32 72 10 2 85.54 5233210812 0.5 12 11.0 38 83 12 2 118.88 5233212312 1.5 12 11.0 38 83 12 2 118.88 5233212512 4.0 12 11.0 38 83 12 2 118.88 5233212916 1.0 16 15.0 44 92 16 2 202.88 5233216116 2.0 16 15.0 44 92 16 2 202.88 5233216316 5.0 16 15.0 44 92 16 2 202.88 52332169
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
13 / 110 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
Ti 10 Ti 10
PG V1 PG V1Article no. Article no.
d1 e8 r ±0,01 l2 d3 l3 l1 d2 h6 Z 52 333 ... 52 334 ...
mm mm mm mm mm mm mm £ £3 0.3 4 2.7 14 50 3 2 45.21 523330313 0.3 4 2.7 32 75 3 2 62.06 523340314 0.3 5 3.7 16 50 4 2 51.10 523330414 0.3 5 3.7 36 75 4 2 67.39 523340415 0.3 6 4.6 18 54 5 2 54.94 523330515 0.3 6 4.6 40 75 5 2 75.69 523340516 0.3 7 5.5 21 57 6 2 62.06 523330616 0.3 7 5.5 44 80 6 2 81.75 523340616 1.0 7 5.5 21 57 6 2 62.06 523330646 1.0 7 5.5 44 80 6 2 81.75 523340646 2.0 7 5.5 21 57 6 2 62.06 523330666 2.0 7 5.5 44 80 6 2 81.75 523340668 0.3 9 7.4 27 63 8 2 82.81 523330818 0.3 9 7.4 54 100 8 2 114.61 523340818 1.0 9 7.4 27 63 8 2 82.81 523330848 1.0 9 7.4 54 100 8 2 114.61 523340848 2.0 9 7.4 27 63 8 2 82.81 523330868 2.0 9 7.4 54 100 8 2 114.61 52334086
10 0.3 11 9.2 32 72 10 2 109.15 5233310110 0.3 11 9.2 60 100 10 2 152.69 5233410110 1.5 11 9.2 32 72 10 2 109.15 5233310510 1.5 11 9.2 60 100 10 2 152.69 5233410510 3.0 11 9.2 32 72 10 2 109.15 5233310810 3.0 11 9.2 60 100 10 2 152.69 5233410812 0.5 12 11.0 38 83 12 2 145.45 5233312312 0.5 12 11.0 75 120 12 2 204.29 5233412312 1.5 12 11.0 38 83 12 2 145.45 5233312512 1.5 12 11.0 75 120 12 2 204.29 5233412512 4.0 12 11.0 38 83 12 2 145.45 5233312912 4.0 12 11.0 75 120 12 2 204.29 5233412916 1.0 16 15.0 44 92 16 2 239.54 5233316116 1.0 16 15.0 92 150 16 2 346.89 5233416116 2.0 16 15.0 44 92 16 2 239.54 5233316316 2.0 16 15.0 92 150 16 2 346.89 5233416316 5.0 16 15.0 44 92 16 2 239.54 5233316916 5.0 16 15.0 92 150 16 2 346.89 52334169
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 111
13
Solid Carbide Torus Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
blank blank
PG V1 PG V1Article no. Article no.
d1 ±0,01 r l2 d3 l3 l6 l1 α° β°
d2 h5 Z Fig. 52 736 ... 52 738 ...mm mm mm mm mm mm mm mm £ £0.5 0.10 1.0 0.45 2.0 9 38 10.0 8.0 3 2 A 165.62 527360051.0 0.25 2.0 0.95 4.0 9 38 12.5 6.5 3 2 A 140.71 527360101.5 0.25 2.5 1.40 7.5 9 38 32.0 5.0 3 2 A 123.39 527360152.0 0.50 3.0 1.80 8.0 9 38 31.0 3.5 3 2 A 96.34 527360203.0 0.50 3.5 2.80 10.0 20 57 11.5 5.0 6 2 A 95.99 527360303.0 0.50 3.5 2.80 12.0 40 80 3.5 2.5 6 2 A 101.32 527380304.0 0.50 4.0 3.80 12.0 20 57 11.0 3.5 6 2 A 91.48 527360404.0 0.50 4.0 3.80 20.0 40 80 4.0 1.5 6 2 A 97.64 527380405.0 0.50 5.0 4.70 14.0 20 57 10.0 2.0 6 2 A 90.17 527360505.0 0.50 5.0 4.70 10.0 40 100 1.5 1.0 6 2 A 126.44 527380506.0 0.80 6.0 5.60 20.0 57 6 2 B 118.08 527360606.0 0.80 6.0 5.60 40.0 100 6 2 B 127.79 527380608.0 1.00 7.0 7.60 25.0 63 8 2 B 124.97 527360808.0 1.00 7.0 7.60 60.0 120 8 2 B 144.51 52738080
10.0 1.00 8.0 9.60 30.0 72 10 2 B 162.90 5273610010.0 1.00 8.0 9.60 60.0 120 10 2 B 154.83 5273810012.0 1.50 10.0 11.50 40.0 83 12 2 B 200.62 5273612012.0 1.50 10.0 11.50 70.0 160 12 2 B 260.89 52738120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ● ○
Solid Carbide milling cutters
13 / 112 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - High-performance tool for clearing - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
Ød3
Ød2
Ød1
l1
l3
Ød2
r r
l1
l2
Ød3l5
Ød1
l6l2 l3
l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 ±0,01 r l2 d3 l3 l6 l5 l1 α° β°
d2 h5 Z 52 732 ... 52 733 ... 52 732 ...mm mm mm mm mm mm mm mm mm £ £ £
3 0.75 2.0 2.8 10 20 21 57 11.5 5.0 6 4 111.17 52732033 111.17 527330334 1.00 2.5 3.8 12 20 21 57 11.0 3.5 6 4 111.17 52732044 111.17 527330445 1.25 3.0 4.7 14 20 21 57 10.0 2.0 6 4 114.37 52732055 114.37 527330556 1.50 4.0 5.6 20 21 57 6 4 115.92 52732065 115.92 527330656 1.50 4.0 5.6 30 80 6 4 115.08 527320668 1.00 5.0 7.6 25 63 8 4 163.96 527320848 1.00 5.0 7.6 35 80 8 4 156.14 527320858 2.00 5.0 7.6 25 27 63 8 4 160.15 52732086 160.15 527330868 2.00 5.0 7.6 35 80 8 4 156.14 52732087
10 1.00 6.0 9.6 30 72 10 4 187.34 5273210410 1.00 6.0 9.6 30 72 10 6 197.18 5273210510 1.00 6.0 9.6 45 100 10 4 197.18 5273210610 1.00 6.0 9.6 45 100 10 6 223.28 5273211010 2.50 6.0 9.6 30 32 72 10 4 182.95 52732107 182.95 5273310710 2.50 6.0 9.6 30 72 10 6 197.18 5273210810 2.50 6.0 9.6 45 100 10 4 198.59 5273210910 2.50 6.0 9.6 45 100 10 6 223.28 5273211112 1.00 7.0 11.5 35 83 12 4 240.83 5273212412 1.00 7.0 11.5 35 83 12 8 277.98 5273212512 1.00 7.0 11.5 50 100 12 4 250.69 5273213012 1.00 7.0 11.5 50 100 12 8 310.96 5273213212 3.00 7.0 11.5 35 38 83 12 4 235.14 52732128 235.14 5273312812 3.00 7.0 11.5 35 83 12 8 277.98 5273212912 3.00 7.0 11.5 50 100 12 4 250.69 5273213112 3.00 7.0 11.5 50 100 12 8 310.96 5273213316 4.00 8.0 15.5 40 44 92 16 4 352.83 52732169 352.83 5273316916 4.00 8.0 15.5 60 120 16 4 364.22 5273217016 4.00 8.0 15.5 60 120 16 8 435.51 52732171
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 286-287● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 113
13
Solid Carbide High Feed Milling Cutter, Factory Standard - for feed per tooth (fz) to 1 mm - Roughing in large depths - gives very quiet running
Ød2
Ød1r
Ød3
l2
l1
l3
r = programming corner radius TiAlN
PG V1Article no.
d1 h6 r l2 d3 l3 l1 d2 h6 Z 56 900 ...
mm mm mm mm mm mm mm £6 0.50 6 5.8 21 57 6 4 102.98 569000608 0.70 8 7.8 27 63 8 4 146.99 5690008010 0.85 10 9.8 32 72 10 4 161.71 5690010012 1.00 12 11.8 38 83 12 4 191.13 5690012016 1.40 16 15.8 50 92 16 4 293.87 56900160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 288-289● ○ ○ ○ ○ ●
Solid Carbide High Feed Milling Cutter, Factory Standard - for feed per tooth (fz) to 1 mm - Roughing in large depths - gives very quiet running
l2
Ød2
Ød1
l1
r
Ød3
l3
r = programming corner radius
TiAlN TiAlN
PG V1 PG V1Article no. Article no.
d1 h6 r l2 d3 l3 l1 d2 h6 Z 56 902 ... 56 904 ...
mm mm mm mm mm mm mm £ £6 0.50 6 5.8 21 57 6 4 132.41 569020606 0.50 6 5.8 64 100 6 4 164.41 569040608 0.70 8 7.8 27 63 8 4 181.91 569020808 0.70 8 7.8 64 100 8 4 208.80 56904080
10 0.85 10 9.8 32 72 10 4 233.78 5690210010 0.85 10 9.8 60 100 10 4 256.93 5690410012 1.00 12 11.8 38 83 12 4 296.26 5690212012 1.00 12 11.8 65 110 12 4 335.57 5690412016 1.40 16 15.8 50 92 16 4 549.23 5690216016 1.40 16 15.8 65 150 16 4 586.06 56904160
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 288-289● ○ ○ ○ ○ ●
Solid Carbide milling cutters
13 / 114 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Radius accuracy: ± 0,005 mm - for Ø ≤ 5.0 mm, angle tolerance α and β: ± 0.5 °
BA
Ød1
l1Ød3l3
r
Ød2
l2l3
Ød2
l1
l6
l2
rØd1
Ød3
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 ±0,01 r l2 d3 l3 l6 l1 α° β°
d2 h5 Z Fig. 52 726 ... 52 728 ...mm mm mm mm mm mm mm mm £ £
3 0.5 3.5 2.8 10 20 57 11.5 5.0 6 4 A 101.79 527260303 0.5 3.5 2.8 12 40 80 3.5 2.5 6 4 A 119.24 527280304 0.5 4.0 3.8 12 20 57 11.0 3.5 6 4 A 105.95 527260404 0.5 4.0 3.8 20 40 80 4.0 1.5 6 4 A 113.19 527280405 0.5 5.0 4.7 14 20 57 10.0 1.5 6 4 A 120.78 527260505 0.5 5.0 4.7 25 40 80 3.0 1.0 6 4 A 140.21 527280506 0.8 6.0 5.6 20 57 6 4 B 112.31 527260616 0.8 6.0 5.6 20 57 6 6 B 145.87 527260606 0.8 6.0 5.6 40 80 6 4 B 118.17 527280616 0.8 6.0 5.6 40 80 6 6 B 163.48 527280608 1.0 7.0 7.6 25 63 8 4 B 160.99 527260818 1.0 7.0 7.6 25 63 8 6 B 168.70 527260808 1.0 7.0 7.6 40 80 8 4 B 177.13 527280818 1.0 7.0 7.6 60 100 8 6 B 178.91 5272808010 1.0 8.0 9.6 30 72 10 4 B 175.36 5272610110 1.0 8.0 9.6 30 72 10 6 B 182.23 5272610010 1.0 8.0 9.6 60 100 10 4 B 218.17 5272810110 1.0 8.0 9.6 60 120 10 6 B 248.66 5272810012 1.5 10.0 11.5 35 83 12 4 B 228.87 5272612112 1.5 10.0 11.5 35 83 12 6 B 262.07 5272612012 1.5 10.0 11.5 70 120 12 4 B 275.24 5272812112 1.5 10.0 11.5 70 160 12 6 B 328.38 52728120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-248● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 115
13
Solid Carbide Torus Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
Ti 1000
PG V1Article no.
d1 e8 r ±0,01 l2 d3 l3 l1 d2 h6 Z 52 111 ...
mm mm mm mm mm mm mm £3 0.3 4 2.7 32 75 3 4 70.83 521110313 0.5 4 2.7 32 75 3 4 70.83 521110333 1.0 4 2.7 32 75 3 4 70.83 521110344 0.4 5 3.7 36 75 4 4 76.77 521110424 0.5 5 3.7 36 75 4 4 76.77 521110434 1.0 5 3.7 36 75 4 4 76.77 521110445 0.5 6 4.6 40 75 5 4 84.03 521110535 1.0 6 4.6 40 75 5 4 84.03 521110546 0.5 7 5.5 44 80 6 4 92.42 521110636 1.0 7 5.5 44 80 6 4 92.42 521110646 1.5 7 5.5 44 80 6 4 92.42 521110658 0.5 9 7.4 54 100 8 4 128.60 521110838 1.0 9 7.4 54 100 8 4 128.60 521110848 1.5 9 7.4 54 100 8 4 128.60 521110858 2.0 9 7.4 54 100 8 4 128.60 5211108610 0.5 11 9.2 60 100 10 4 173.58 5211110310 1.0 11 9.2 60 100 10 4 173.58 5211110410 1.5 11 9.2 60 100 10 4 173.58 5211110510 2.0 11 9.2 60 100 10 4 173.58 5211110612 0.5 12 11.0 75 120 12 4 224.47 5211112312 1.0 12 11.0 75 120 12 4 224.47 5211112412 1.5 12 11.0 75 120 12 4 224.47 5211112512 2.0 12 11.0 75 120 12 4 224.47 5211112616 1.0 16 15.0 92 150 16 4 384.86 5211116116 2.0 16 15.0 92 150 16 4 384.86 5211116320 1.0 20 18.5 92 150 20 4 517.25 5211120120 2.5 20 18.5 92 150 20 4 517.25 52111204
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-248○ ● ○ ● ● ○
Solid Carbide milling cutters
13 / 116 toolingcenter.com
Solid Carbide Intermediate Torus Cutter, Factory Standard - Reduced shank Ø for flexible application in various overhang lengths!
l2Ød1
l1
r
Ød2
Ti 1000
PG V1Article no.
d1 e8 r ±0,01 l2 l1 d2 h6 Z 52 107 ...
mm mm mm mm mm £7 0.5 9 120 6 4 131.10 521070757 1.0 9 120 6 4 131.10 521070767 1.5 9 120 6 4 131.10 521070779 0.5 12 135 8 4 170.01 521070959 1.0 12 135 8 4 170.01 521070969 1.5 12 135 8 4 170.01 5210709711 1.0 15 150 10 4 221.03 5210711511 1.5 15 150 10 4 221.03 5210711611 2.0 15 150 10 4 221.03 5210711713 1.0 18 160 12 4 281.88 5210713513 1.5 18 160 12 4 281.88 5210713613 2.0 18 160 12 4 281.88 5210713715 1.0 21 160 14 4 319.73 5210715615 1.5 21 160 14 4 319.73 5210715715 2.0 21 160 14 4 319.73 5210715817 1.0 24 180 16 4 384.75 5210717617 1.5 24 180 16 4 384.75 5210717717 2.0 24 180 16 4 384.75 5210717817 3.0 24 180 16 4 384.75 52107179
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ● ● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 117
13
Solid Carbide Torus Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
Ti 1000
PG V1Article no.
d1 e8 r ±0,01 l2 d3 l3 l1 d2 h6 Z 52 108 ...
mm mm mm mm mm mm mm £3 0.3 4 2.7 14 50 3 4 50.54 521083033 0.5 4 2.7 14 50 3 4 49.47 521083053 1.0 4 2.7 14 50 3 4 50.54 521083104 0.4 5 3.7 16 50 4 4 54.33 521084044 0.5 5 3.7 16 50 4 4 54.23 521084054 1.0 5 3.7 16 50 4 4 54.33 521084105 0.5 6 4.6 18 54 5 4 58.98 521085055 1.0 6 4.6 18 54 5 4 58.98 521085106 0.5 7 5.5 21 57 6 4 71.66 521086056 1.0 7 5.5 21 57 6 4 71.18 521080606 1.5 7 5.5 21 57 6 4 71.31 521086158 0.5 9 7.4 27 63 8 4 91.37 521088058 1.0 9 7.4 27 63 8 4 91.02 521080808 1.5 9 7.4 27 63 8 4 91.37 521088158 2.0 9 7.4 27 63 8 4 91.37 5210882010 0.5 11 9.2 32 72 10 4 122.56 5210890510 1.0 11 9.2 32 72 10 4 122.09 5210891010 1.5 11 9.2 32 72 10 4 121.49 5210810010 2.0 11 9.2 32 72 10 4 122.09 5210892012 0.5 12 11.0 38 83 12 4 164.67 5210895512 1.0 12 11.0 38 83 12 4 163.73 5210896012 1.5 12 11.0 38 83 12 4 163.73 5210812012 2.0 12 11.0 38 83 12 4 164.67 5210897016 1.0 16 15.0 44 93 16 4 276.79 5210816116 2.0 16 15.0 44 93 16 4 276.18 5210816020 1.0 20 18.5 50 104 20 4 396.14 5210820120 2.5 20 18.5 50 104 20 4 395.18 52108200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13 / 118 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 e8 r ±0,01 l2 d3 l3 l1 d2 h6 Z 52 119 ... 52 119 ...
mm mm mm mm mm mm mm £ £3 0.5 4 2.7 14 50 3 4 44.02 521190333 1.0 4 2.7 14 50 3 4 44.02 521190344 0.5 5 3.7 16 50 4 4 47.58 521190434 1.0 5 3.7 16 50 4 4 47.58 521190445 0.5 6 4.6 18 54 5 4 53.87 521190535 1.0 6 4.6 18 54 5 4 53.87 521190546 0.5 7 5.5 21 54 6 4 66.92 521190636 1.0 7 5.5 21 54 6 4 66.92 521190648 0.5 9 7.4 27 63 8 4 88.51 521190838 1.0 9 7.4 27 63 8 4 88.51 521190848 2.0 9 7.4 27 63 8 4 88.51 5211908610 0.5 11 9.2 32 72 10 4 113.66 5211910310 1.0 11 9.2 32 72 10 4 113.66 5211910410 2.0 11 9.2 32 72 10 4 113.66 5211910612 0.5 12 11.0 38 83 12 4 153.28 5211912312 1.0 12 11.0 38 83 12 4 153.28 5211912412 2.0 12 11.0 38 83 12 4 153.28 5211912616 1.0 16 15.0 44 93 16 4 241.43 5211916116 2.0 16 15.0 44 93 16 4 259.47 5211916320 1.0 20 18.5 50 104 20 4 367.18 5211920120 2.5 20 18.5 50 104 20 4 367.18 52119204
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ● ● ○
Solid Carbide milling cutters
13
toolingcenter.com 13 / 119
Solid carbide engraving cutter 60°
l2Ød1
l1
Ød2
blank
PG V1Article no.
d1 h6 l2 l1 d2 h6 Z 52 195 ...
mm mm mm mm £3 15 50 3 1 42.35 521950304 18 50 4 1 44.47 521950406 20 54 6 1 48.41 52195060
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243 ● ○
Solid carbide NC deburring cutter, factory standard - Sets on next page
Ød1
l1
Ød2
α = 60° α = 90° α = 120°
blank blank blank
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 h6 l1 d2 h6 Z 52 150 ... 52 151 ... 52 152 ...
mm mm mm £ £ £4 50 4 4 28.71 52150040 1) 28.71 52151040 1) 27.70 52152040 1)
6 54 6 4 36.84 52150060 2) 36.84 52151060 2) 36.84 52152060 2)
8 59 8 4 45.93 52150080 2) 43.73 52151080 2) 43.73 52152080 2)
10 60 10 4 55.29 52150100 2) 53.68 52151100 2) 53.68 52152100 2)
12 70 12 4 75.48 52150120 2) 75.48 52151120 2) 75.48 52152120 2)
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○
1) DIN 6535 HA Shank
2) included in the set
Solid Carbide milling cutters
13 / 120 toolingcenter.com
Solid carbide NC deburring cutter, factory standard
Ød1
l1
Ød2
α = 60° α = 90° α = 120°
Ti 1000 Ti 1000 Ti 1000
PG V1 PG V1 PG V1Article no. Article no. Article no.
d1 h6 l1 d2 h6 Z 52 153 ... 52 154 ... 52 155 ...
mm mm mm £ £ £4 50 4 4 36.95 52153040 1) 36.95 52154040 1) 36.95 52155040 1)
6 54 6 4 49.38 52153060 49.38 52154060 49.38 521550608 59 8 4 60.34 52153080 60.34 52154080 60.34 5215508010 60 10 4 73.34 52153100 73.34 52154100 73.34 5215510012 70 12 4 99.88 52153120 99.88 52154120 99.88 52155120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials
● ○ ● ○ ○ ○
1) DIN 6535 HA Shank
Solid carbide NC deburring cutter set, factory standard - Sets contain Ø 6, Ø 8, Ø 10 and Ø 12 mm
α = 60° α = 90° α = 120°
blank blank blank
PG V1 PG V1 PG V1Article no. Article no. Article no.52 150 ... 52 151 ... 52 152 ...
£ £ £Set 219.48 52150999 219.48 52151999 219.48 52152999
Solid Carbide milling cutters
toolingcenter.com 13 / 121
13
Solid carbide NC chamfer milling cutter, factory standard
BA
Ød1
Ød3
Ød2
l1
l2
l1
Ød2
Ød1
2 x
90°
2 x
90°
l3l2
blank
PG V1Article no.
d1 l2 d3 l3 l1 d2 h5 Z Fig. 52 158 ...
mm mm mm mm mm mm £3 2.0 2.2 10.0 75 4 4 A 69.53 521580304 2.7 2.9 18.0 75 4 4 A 69.53 521580405 3.0 3.9 18.0 75 5 4 A 71.31 521580506 3.5 3.9 18.5 100 6 4 A 74.04 521580608 2.0 100 6 4 B 96.22 5215808010 4.0 100 6 4 B 120.19 5215810012 6.0 100 6 4 B 144.16 52158120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○
Solid carbide NC chamfer milling cutter, factory standard
BA
Ød1
Ød3
Ød2
l1
l2
l1
Ød2
Ød1
2 x
90°
2 x
90°
l3l2
Ti 1000
PG V1Article no.
d1 l2 d3 l3 l1 d2 h5 Z Fig. 52 159 ...
mm mm mm mm mm mm £3 2.0 2.2 10.0 75 4 4 A 79.02 521590304 2.7 2.9 18.0 75 4 4 A 78.57 521590405 3.0 3.9 18.0 75 5 4 A 81.63 521590506 3.5 3.9 18.5 100 6 4 A 81.71 521590608 2.0 100 6 4 B 108.20 5215908010 4.0 100 6 4 B 133.59 5215910012 6.0 100 6 4 B 159.22 52159120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 122 toolingcenter.com
Solid carbide quarter-round profile milling cutter, concave, factory standard
Ød1
l1
r
Ød2
Ti 1000
PG V1Article no.
r +/-0,02 d1 l1 d2 h6 Z 52 249 ...
mm mm mm mm £0.50 7.0 70 8 4 129.20 522490051.00 6.0 70 8 4 129.08 522490101.25 7.5 75 10 4 131.63 522490121.50 7.0 75 10 4 137.39 522490152.00 6.0 75 10 4 137.39 522490202.50 7.0 73 12 4 154.23 522490253.00 6.0 73 12 4 154.23 522490303.50 9.0 80 16 4 194.22 522490354.00 8.0 80 16 4 194.22 522490404.50 7.0 80 16 4 194.22 522490455.00 10.0 80 20 4 275.71 522490506.00 8.0 80 20 4 275.71 52249060
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 123
13
Solid carbide die milling cutter, factory standard
l1
l2
Ød2
Ød1
l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 ±0,1 α° l2 l5 l1 d2 h6 Z 52 291 ... 52 291 ...
mm mm mm mm mm £ £2.0 0,5 10 50 3 4 78.06 522910002.5 0,5 10 50 3 4 75.22 522910012.5 0,5 20 60 4 4 99.18 522910023.0 0,5 20 60 4 4 101.68 522910034.0 0,5 20 60 5 4 104.40 522910045.0 0,5 30 34 75 6 6 116.99 522910056.0 0,5 30 35 75 8 6 118.88 522910068.0 0,5 30 35 80 10 6 125.88 5229100710.0 0,5 30 36 85 12 6 144.87 5229100812.0 0,5 30 36 85 14 6 183.31 5229100912.0 0,5 50 57 110 14 6 195.88 5229101016.0 0,5 60 72 120 18 6 285.80 522910112.0 1 10 50 3 4 78.06 522911002.5 1 10 50 3 4 75.22 522911012.5 1 20 60 4 4 99.18 522911023.0 1 20 60 4 4 101.68 522911033.5 1 20 60 5 4 104.40 522911044.0 1 20 60 5 4 104.40 522911054.5 1 20 29 65 6 6 104.17 522911065.0 1 25 29 70 6 6 116.99 522911076.0 1 30 36 75 8 6 116.99 522911088.0 1 30 36 80 10 6 125.88 5229110910.0 1 30 36 85 12 6 144.87 5229111012.0 1 30 36 85 14 6 183.31 5229111112.0 1 50 55 110 14 6 195.88 5229111216.0 1 55 61 115 18 6 285.80 522911132.0 1,5 10 50 3 4 78.06 522912002.5 1,5 10 50 4 4 85.89 522912012.5 1,5 20 60 4 4 99.18 522912023.0 1,5 20 60 4 4 101.68 522912033.5 1,5 20 60 5 4 104.40 522912044.0 1,5 20 60 5 4 104.40 522912054.5 1,5 20 25 65 6 4 104.17 522912065.0 1,5 30 36 75 8 6 116.99 522912076.0 1,5 30 36 75 8 6 116.99 522912088.0 1,5 30 36 80 10 6 125.88 52291209
10.0 1,5 30 36 85 12 6 144.87 5229121012.0 1,5 30 36 85 14 6 183.31 5229121112.0 1,5 50 56 110 16 6 211.65 5229121216.0 1,5 60 68 125 20 6 323.29 522912132.0 2 10 50 3 4 78.06 522913012.5 2 10 50 4 4 85.89 522913022.5 2 20 60 4 4 99.18 522913033.0 2 20 60 5 4 104.40 522913043.5 2 20 60 5 4 104.40 522913054.0 2 20 27 65 6 4 104.17 522913064.5 2 30 37 75 8 4 116.99 522913075.0 2 30 37 75 8 6 116.99 522913086.0 2 28 32 75 8 6 116.99 522913098.0 2 28 33 75 10 6 125.88 52291310
10.0 2 28 33 85 12 6 144.87 5229131112.0 2 28 33 85 14 6 183.31 5229131212.0 2 50 56 110 16 6 204.18 5229131316.0 2 55 62 115 20 6 315.11 522913142.0 2,5 15 50 4 4 87.32 522914012.5 2,5 20 60 5 4 100.50 522914023.0 2,5 20 60 5 4 104.40 522914034.0 2,5 20 26 65 6 4 104.17 52291404
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○ ○
Solid Carbide milling cutters
continued on next page
13 / 124 toolingcenter.com
Solid carbide die milling cutter, factory standard
l1
l2
Ød2
Ød1
l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V1 PG V1Article no. Article no.
d1 ±0,1 α° l2 l5 l1 d2 h6 Z 52 291 ... 52 291 ...
mm mm mm mm mm £ £5.0 2,5 30 35 75 8 6 116.99 522914056.0 2,5 30 36 80 10 6 116.99 522914068.0 2,5 30 36 85 12 6 144.74 52291407
10.0 2,5 40 46 100 14 6 183.31 522914082.0 3 10 50 4 4 87.32 522915002.5 3 10 50 4 4 89.11 522915012.5 3 20 27 65 6 4 104.76 522915023.0 3 25 32 70 6 4 104.17 522915033.0 3 30 38 75 8 4 116.99 522915043.0 3 40 47 85 8 4 126.12 522915054.0 3 25 30 70 8 6 111.77 522915064.0 3 30 35 75 8 6 116.15 522915075.0 3 40 46 90 10 6 145.69 522915086.0 3 30 36 80 10 6 126.83 522915098.0 3 30 36 85 12 6 144.74 522915108.0 3 50 57 110 14 6 189.72 5229151110.0 3 30 36 85 14 6 183.31 5229151210.0 3 50 57 110 16 6 220.32 5229151312.0 3 30 38 90 16 6 202.28 5229151412.0 3 50 57 110 18 6 278.69 522915152.5 4 25 30 65 6 4 112.35 522916013.0 4 20 26 65 6 4 112.35 522916023.5 4 25 32 70 8 4 122.91 522916034.0 4 28 33 70 8 6 135.00 522916045.0 4 30 36 85 10 6 138.58 522916055.0 4 45 51 100 12 6 158.87 522916066.0 4 30 38 84 12 6 156.84 522916076.0 4 50 58 110 14 6 201.10 522916088.0 4 30 38 84 14 6 194.33 522916098.0 4 50 58 110 16 6 233.48 5229161010.0 4 30 39 93 16 6 214.38 5229161110.0 4 50 58 114 18 6 295.40 522916122.5 5 20 25 65 6 4 112.35 522917013.0 5 28 34 70 8 4 122.91 522917023.5 5 30 38 80 10 4 136.67 522917034.0 5 30 36 80 10 6 136.67 522917044.5 5 30 36 80 10 6 136.67 522917055.0 5 30 38 84 12 6 158.87 522917065.0 5 40 46 100 12 6 162.30 522917076.0 5 30 36 93 12 6 159.09 522917086.0 5 55 62 110 16 6 233.48 522917098.0 5 30 38 90 14 6 197.06 522917108.0 5 50 58 114 18 6 295.40 5229171110.0 5 30 38 93 16 6 214.38 5229171210.0 5 55 63 115 20 6 323.77 5229171312.0 5 30 38 93 18 6 227.55 5229171412.0 5 45 52 100 20 6 315.22 52291715
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 125
13
Carbide burrs, similar to DIN 8033Teeth Z3: Application "medium" Vc Page 258
Teeth Z6: cross-pitched version
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 α° 50 928 ... 50 928 ...
mm mm mm mm £ £6 5 52 6 60 14.47 50928606 15.72 5092870612 10 60 6 60 19.29 50928612 1) 21.16 50928712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 50 921 ... 50 921 ...
mm mm mm mm £ £3 14 40 3 7.00 50921303 7.63 509214036 14 49 3 12.44 50921306 1) 13.85 50921406 1)
6 18 50 6 14.15 50921606 15.56 509217068 18 63 6 18.04 50921608 1) 19.60 50921708 1)
10 20 65 6 20.37 50921610 1) 22.25 50921710 1)
12 25 70 6 26.12 50921612 1) 28.61 50921712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 α° 50 926 ... 50 926 ...
mm mm mm mm £ £3 14 40 3 10 8.39 50926303 9.34 509264036 14 49 3 22 11.82 50926306 1) 12.75 50926406 1)
6 18 50 6 16 14.78 50926606 16.17 509267068 15 60 6 26 14.15 50926608 1) 15.41 50926708 1)
10 18 63 6 28 16.64 50926610 1) 18.35 50926710 1)
12 20 65 6 30 22.56 50926612 1) 24.88 50926712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 α° 50 927 ... 50 927 ...
mm mm mm mm £ £6 3 52 6 90 13.85 50927606 15.10 5092770612 6 56 6 90 16.64 50927612 1) 18.35 50927712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 50 922 ... 50 922 ...
mm mm mm mm £ £3 14 40 3 8.88 50922303 9.65 509224036 14 49 3 14.15 50922306 1) 15.41 50922406 1)
6 18 50 6 15.72 50922606 17.43 509227068 18 63 6 20.22 50922608 1) 22.25 50922708 1)
10 20 65 6 23.33 50922610 1) 25.51 50922710 1)
12 25 70 6 31.42 50922612 1) 34.53 50922712 1)
16 25 70 6 41.67 50922616 1) 45.71 50922716 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 α° 50 923 ... 50 923 ...
mm mm mm mm £ £3 14 40 3 14 8.39 50923303 9.34 509234036 20 55 3 14 14.47 50923306 1) 15.72 50923406 1)
6 20 50 6 14 15.72 50923606 17.43 509237068 24 69 6 14 22.25 50923608 1) 24.42 50923708 1)
10 28 73 6 14 27.68 50923610 1) 30.48 50923710 1)
12 30 75 6 14 32.97 50923612 1) 36.24 50923712 1)
1) Steel shank / carbide head - shank tolerance h7
Solid Carbide milling cutters
13 / 126 toolingcenter.com
Carbide burrs, similar to DIN 8033Teeth Z3: Application "medium" Vc Page 258
Teeth Z6: Application "medium"
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 50 925 ... 50 925 ...
mm mm mm mm £ £3 14 40 3 8.25 50925303 9.02 509254036 14 49 3 12.13 50925306 1) 13.54 50925406 1)
6 18 50 6 17.90 50925606 19.29 509257068 16 61 6 18.04 50925608 1) 19.90 50925708 1)
10 20 65 6 22.25 50925610 1) 24.42 50925710 1)
12 25 70 6 26.44 50925612 1) 28.78 50925712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1 Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 50 929 ... 50 929 ...
mm mm mm mm £ £3 5 40 3 8.39 50929303 9.34 509294036 9 44 3 12.44 50929306 1) 13.69 50929406 1)
6 9 50 6 16.80 50929606 18.51 509297068 14 59 6 18.66 50929608 1) 20.53 50929708 1)
10 16 61 6 21.16 50929610 1) 23.49 50929710 1)
12 21 66 6 26.75 50929612 1) 29.24 50929712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1
Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 α° 50 931 ... 50 931 ...
mm mm mm mm £ £3 3 40 3 15 8.39 50931303 9.34 509314036 6 50 6 15 15.41 50931606 16.96 50931706
12 12 57 6 15 20.69 50931612 1) 22.56 50931712 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 50 924 ... 50 924 ...
mm mm mm mm £ £3 14 40 3 8.39 50924303 9.34 509244036 14 49 3 13.54 50924306 1) 14.78 50924406 1)
6 18 50 6 18.35 50924606 20.37 509247068 16 61 6 19.60 50924608 1) 21.63 50924708 1)
10 20 65 6 22.71 50924610 1) 24.88 50924710 1)
12 25 70 6 27.38 50924612 1) 30.17 50924712 1)
16 28 73 6 39.04 50924616 1) 43.08 50924716 1)
1) Steel shank / carbide head - shank tolerance h7
l1
l2
Ød2
Ød1
Z3 Z6
PG U9 PG U9Article no. Article no.
d1 l2 l1 d2 h6 50 930 ... 50 930 ...
mm mm mm mm £ £3 2.5 40 3 8.39 50930303 9.34 509304036 5.0 40 3 11.36 50930306 1) 12.44 50930406 1)
6 5.0 50 6 16.17 50930606 18.04 509307068 7.0 52 6 15.41 50930608 1) 16.96 50930708 1)
10 9.0 54 6 18.20 50930610 1) 19.90 50930710 1)
12 11.0 56 6 21.78 50930612 1) 23.95 50930712 1)
16 15.0 60 6 30.80 50930616 1) 33.76 50930716 1)
1) Steel shank / carbide head - shank tolerance h7
Solid Carbide milling cutters
toolingcenter.com 13 / 127
13
Carbide burrs, similar to DIN 8033Teeth Z3: Application "medium" Vc Page 258
Teeth Z6: Application "medium"
Contents: 10 pieces of various burrs Shank-Ø: 3 mm / Head-Ø: 3 mm
50 933 998 50 933 999
1 x 50 921 303 1 x 50 921 4031 x 50 922 303 1 x 50 922 4031 x 50 923 303 1 x 50 923 4031 x 50 924 303 1 x 50 924 4031 x 50 925 303 1 x 50 925 4031 x 50 926 303 1 x 50 926 4031 x ~50 927 Ød1 = 3 1 x ~50 927 Ød1 = 31 x 50 929 303 1 x 50 929 4031 x 50 930 303 1 x 50 930 4031 x 50 931 303 1 x 50 931 403
PG U9Article no.
Version 50 933 ...£
Z 3 82.08 50933998Z 6 89.83 50933999
Contents: 10 pieces of various burrs Shank-Ø: 3 mm / Head-Ø: 6 mm
50 934 998 50 934 999
1 x 50 921 306 1 x 50 921 4061 x 50 922 306 1 x 50 922 4061 x 50 923 306 1 x 50 923 4061 x 50 924 306 1 x 50 924 4061 x 50 925 306 1 x 50 925 4061 x 50 926 306 1 x 50 926 4061 x ~50 927 Ød1 = 6 1 x ~50 927 Ød1 = 61 x 50 929 306 1 x 50 929 4061 x 50 930 306 1 x 50 930 4061 x ~50 931 Ød1 = 6 1 x ~50 931 Ød1 = 6
PG U9Article no.
Version 50 934 ...£
Z 3 124.33 50934998Z 6 136.42 50934999
Contents: 10 pieces of various burrs Shank-Ø: 3 mm / Head-Ø: 6 mm
50 935 998 50 935 999
1 x 50 921 606 1 x 50 921 7061 x 50 922 606 1 x 50 922 7061 x 50 923 606 1 x 50 923 7061 x 50 924 606 1 x 50 924 7061 x 50 925 606 1 x 50 925 7061 x 50 926 606 1 x 50 926 7061 x 50 927 606 1 x 50 927 7061 x 50 929 606 1 x 50 929 7061 x 50 930 606 1 x 50 930 7061 x 50 931 606 1 x 50 931 706
PG U9Article no.
Version 50 935 ...£
Z3 161.09 50935998Z6 176.90 50935999
Solid Carbide milling cutters
13 / 128 toolingcenter.com
Solid carbide end milling cutter, factory standard - Transition angle α = 15°
l2
Ød2
Ød1
l1
l3
Ød3
K Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 K
Z 50 909 ... 50 909 ...mm mm mm mm mm mm mm £ £0.2 0.2 0.18 0.6 55 6 0,02 2 68.33 509090210.2 0.2 0.18 1.0 55 6 0,02 2 68.94 509090220.2 0.2 0.18 1.6 55 6 0,02 2 69.65 509090230.2 0.2 0.18 2.0 55 6 0,02 2 70.47 509090240.3 0.3 0.28 0.9 55 6 0,03 2 68.33 509090310.3 0.3 0.28 1.5 55 6 0,03 2 68.94 509090320.3 0.3 0.28 2.4 55 6 0,03 2 69.65 509090330.3 0.3 0.28 3.0 55 6 0,03 2 70.47 509090340.4 0.4 0.37 1.2 55 6 0,04 2 68.33 509090410.4 0.4 0.37 2.0 55 6 0,04 2 68.94 509090420.4 0.4 0.37 3.2 55 6 0,04 2 69.65 509090430.4 0.4 0.37 4.0 55 6 0,04 2 70.47 509090440.5 0.5 0.45 1.5 55 6 0,05 2 66.57 509090510.5 0.5 0.45 2.5 55 6 0,05 2 67.28 509090520.5 0.5 0.45 4.0 55 6 0,05 2 68.33 509090530.5 0.5 0.45 5.0 55 6 0,05 2 68.94 509090540.6 0.6 0.58 2.0 55 6 0,06 2 56.10 509090610.6 0.6 0.58 3.0 55 6 0,06 2 56.10 509090620.6 0.6 0.58 5.0 65 6 0,06 2 60.87 509090630.6 0.6 0.58 6.0 65 6 0,06 2 66.08 509090640.8 0.8 0.77 2.5 55 6 0,08 2 55.89 509090810.8 0.8 0.77 4.0 55 6 0,08 2 56.10 509090820.8 0.8 0.77 6.5 65 6 0,08 2 62.17 509090830.8 0.8 0.77 8.0 65 6 0,08 2 66.08 509090841.0 1.0 0.95 3.0 55 6 0,1 2 55.89 509091011.0 1.0 0.95 5.0 55 6 0,1 2 56.10 509091021.0 1.0 0.95 8.0 65 6 0,1 2 59.09 509091031.0 1.0 0.95 10.0 65 6 0,1 2 62.17 509091041.0 1.0 0.95 12.0 65 6 0,1 2 66.08 509091051.2 1.2 1.15 3.0 55 6 0,12 2 55.89 509091211.2 1.2 1.15 6.0 55 6 0,12 2 56.10 509091221.2 1.2 1.15 10.0 65 6 0,12 2 62.17 509091231.2 1.2 1.15 12.0 65 6 0,12 2 66.08 509091241.3 1.3 1.25 4.0 55 6 0,12 2 55.89 509091311.3 1.3 1.25 7.0 55 6 0,12 2 56.10 509091321.3 1.3 1.25 11.0 65 6 0,12 2 62.17 509091331.3 1.3 1.25 13.0 65 6 0,12 2 66.08 509091341.5 1.5 1.44 5.0 55 6 0,12 2 56.10 509091511.5 1.5 1.44 7.5 55 6 0,12 2 56.10 509091521.5 1.5 1.44 12.0 65 6 0,12 2 66.08 509091531.5 1.5 1.44 15.0 65 6 0,12 2 66.08 509091541.6 1.6 1.52 5.0 55 6 0,12 2 56.10 509091611.6 1.6 1.52 8.0 55 6 0,12 2 56.10 509091621.6 1.6 1.52 13.0 65 6 0,12 2 62.17 509091631.6 1.6 1.52 16.0 65 6 0,12 2 66.08 509091641.8 1.8 1.72 5.5 55 6 0,12 2 55.89 509091811.8 1.8 1.72 9.0 55 6 0,12 2 56.10 509091821.8 1.8 1.72 14.5 65 6 0,12 2 62.17 509091831.8 1.8 1.72 18.0 65 6 0,12 2 66.08 50909184
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 129
13
Solid carbide end milling cutter, factory standard - Transition angle α = 15°
l2
Ød2
Ød1
l1
l3
Ød3
K Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 K
Z 50 909 ... 50 909 ...mm mm mm mm mm mm mm £ £2.0 2.0 1.92 6.0 55 6 0,13 2 55.89 509092012.0 2.0 1.92 10.0 55 6 0,13 2 56.10 509092022.0 2.0 1.92 14.0 55 6 0,13 2 59.09 509092032.0 2.0 1.92 16.0 65 6 0,13 2 66.08 509092042.0 2.0 1.92 20.0 65 6 0,13 2 66.08 509092052.3 2.3 2.22 7.0 55 6 0,13 2 56.10 509092312.3 2.3 2.22 11.5 55 6 0,13 2 59.09 509092322.3 2.3 2.22 18.5 65 6 0,13 2 66.08 509092332.3 2.3 2.22 23.0 65 6 0,13 2 66.08 509092343.0 3.0 2.90 9.0 65 6 0,15 2 59.09 509093013.0 3.0 2.90 15.0 65 6 0,15 2 66.08 509093023.0 3.0 2.90 24.0 100 6 0,15 2 71.66 509093033.0 3.0 2.90 30.0 100 6 0,15 2 74.51 509093044.0 4.0 3.90 12.0 65 6 0,15 2 66.08 509094014.0 4.0 3.90 20.0 65 6 0,15 2 66.08 509094024.0 4.0 3.90 32.0 100 6 0,15 2 74.51 509094034.0 4.0 3.90 40.0 100 6 0,15 2 77.00 509094045.0 5.0 4.90 15.0 65 6 0,15 2 66.08 509095015.0 5.0 4.90 25.0 65 6 0,15 2 66.08 509095025.0 5.0 4.90 40.0 100 6 0,15 2 77.00 509095035.0 5.0 4.90 50.0 100 6 0,15 2 79.38 509095046.0 6.0 5.90 18.0 65 6 0,15 2 66.08 509096016.0 6.0 5.90 30.0 100 6 0,15 2 74.51 509096026.0 6.0 5.90 48.0 100 6 0,15 2 79.38 509096036.0 6.0 5.90 60.0 100 6 0,15 2 81.71 50909604
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 130 toolingcenter.com
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l5
K
l5 with Shank DIN 6535 HB blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 593 ... 50 593 ... 50 594 ... 50 594 ...mm mm mm mm mm mm £ £ £ £0.25 0.5 38 3.0 2 24.69 505949250.30 1.0 38 3.0 2 22.70 505949300.35 1.0 38 3.0 2 22.70 505949350.40 1.0 38 3.0 2 22.70 505949400.50 1.5 38 3.0 2 22.70 505949500.60 1.5 38 3.0 2 22.70 505949600.70 2.0 38 3.0 2 22.70 505949700.80 2.0 38 3.0 2 22.70 505949800.90 2.5 38 3.0 2 22.70 505949901.00 3.0 50 3.0 2 23.85 505940101.10 3.0 50 3.0 2 23.85 505940111.20 4.0 50 3.0 2 23.85 505940121.40 4.0 50 3.0 2 23.85 505940141.50 4.0 50 3.0 2 23.85 505940151.60 4.0 50 3.0 2 23.85 505940161.80 5.0 50 3.0 2 23.85 505940182.00 5.0 50 3.0 0,07 2 21.96 505940202.00 8.0 32 2.0 0,07 2 11.19 505930202.50 6.0 50 3.0 0,07 2 23.85 505940252.50 8.0 32 2.5 0,07 2 11.19 505930252.80 8.0 21 57 6.0 0,07 2 19.94 505940283.00 8.0 21 57 6.0 0,15 2 19.94 505940303.00 12.0 32 3.0 0,15 2 11.19 505930303.50 12.0 32 3.5 0,15 2 11.19 505930353.80 11.0 21 57 6.0 0,15 2 19.94 505940384.00 11.0 21 57 6.0 0,15 2 19.94 505940404.00 12.0 40 4.0 0,15 2 11.54 505930404.50 14.0 50 4.5 0,15 2 14.08 505930454.80 13.0 21 57 6.0 0,15 2 19.94 505940485.00 13.0 21 57 6.0 0,15 2 19.94 505940505.00 14.0 50 5.0 0,15 2 14.08 505930505.50 16.0 50 5.5 0,15 2 16.61 505930555.80 13.0 21 57 6.0 0,15 2 19.94 505940586.00 13.0 21 57 6.0 0,15 2 19.94 505940606.00 16.0 14 50 6.0 0,15 2 16.61 505930606.50 16.0 50 6.5 0,15 2 21.54 505930656.80 16.0 27 63 8.0 0,15 2 23.02 505940687.00 16.0 27 63 8.0 0,15 2 23.02 505940707.00 20.0 60 7.0 0,15 2 21.54 505930707.50 20.0 60 7.5 0,15 2 21.65 505930757.80 19.0 27 63 8.0 0,15 2 23.02 505940788.00 18.0 24 60 8.0 0,15 2 21.65 505930808.00 19.0 27 63 8.0 0,15 2 23.02 505940808.50 20.0 60 8.5 0,15 2 28.98 505930858.70 19.0 32 72 10.0 0,15 2 35.60 505940879.00 19.0 32 72 10.0 0,15 2 35.60 505940909.00 20.0 60 9.0 0,15 2 28.98 505930909.50 22.0 70 9.5 0,15 2 34.45 505930959.70 22.0 32 72 10.0 0,15 2 35.60 50594097
10.00 20.0 30 70 10.0 0,15 2 34.45 5059310010.00 22.0 32 72 10.0 0,15 2 35.60 5059410010.70 26.0 38 83 12.0 0,15 2 55.41 5059410711.00 22.0 70 11.0 0,15 2 45.63 50593110
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 131
13
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l5
K
l5 with Shank DIN 6535 HB blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 593 ... 50 593 ... 50 594 ... 50 594 ...mm mm mm mm mm mm £ £ £ £
11.00 26.0 38 83 12.0 0,15 2 55.41 5059411011.70 26.0 38 83 12.0 0,15 2 55.41 5059411712.00 20.0 25 70 12.0 0,15 2 45.63 5059312012.00 26.0 38 83 12.0 0,15 2 52.91 5059412013.00 25.0 75 13.0 0,15 2 66.44 5059313013.70 26.0 38 83 14.0 0,15 2 67.75 5059413714.00 22.0 30 75 14.0 0,15 2 62.88 5059314014.00 26.0 38 83 14.0 0,15 2 67.75 5059414015.00 25.0 75 15.0 0,15 2 87.80 5059315015.70 32.0 44 92 16.0 0,15 2 89.34 5059415716.00 22.0 27 75 16.0 0,15 2 82.71 5059316016.00 32.0 44 92 16.0 0,15 2 79.49 5059416017.70 32.0 44 92 18.0 0,15 2 148.06 5059417718.00 30.0 52 100 18.0 0,15 2 115.56 5059318018.00 32.0 44 92 18.0 0,15 2 105.24 5059418019.70 38.0 54 104 20.0 0,15 2 195.16 5059419720.00 30.0 50 100 20.0 0,15 2 122.44 5059320020.00 38.0 54 104 20.0 0,15 2 133.35 50594200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
13 / 132 toolingcenter.com
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l5
K
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 595 ... 50 595 ...mm mm mm mm mm mm £ £0.25 0.5 38 3 2 28.98 505959250.30 1.0 38 3 2 28.98 505959300.35 1.0 38 3 2 28.98 505959350.40 1.0 38 3 2 27.65 505959400.50 1.5 38 3 2 27.65 505959500.60 1.5 38 3 2 27.65 505959600.70 2.0 38 3 2 27.65 505959700.80 2.0 38 3 2 27.65 505959800.90 2.5 38 3 2 27.65 505959901.00 3.0 50 3 2 27.65 505950101.10 3.0 50 3 2 28.17 505950111.20 4.0 50 3 2 28.17 505950121.40 4.0 50 3 2 28.17 505950141.50 4.0 50 3 2 28.17 505950151.60 4.0 50 3 2 28.17 505950161.80 5.0 50 3 2 28.17 505950182.00 5.0 50 3 0,08 2 27.47 505950202.50 6.0 50 3 0,08 2 28.17 505950252.80 8.0 21 57 6 0,08 2 27.47 505950283.00 8.0 21 57 6 0,15 2 27.47 505950303.80 11.0 21 57 6 0,15 2 27.47 505950384.00 11.0 21 57 6 0,15 2 27.47 505950404.80 13.0 21 57 6 0,15 2 27.47 505950485.00 13.0 21 57 6 0,15 2 27.47 505950505.80 13.0 21 57 6 0,15 2 27.47 505950586.00 13.0 21 57 6 0,15 2 27.47 505950606.80 16.0 27 63 8 0,15 2 31.66 505950687.00 16.0 27 63 8 0,15 2 31.66 505950707.80 19.0 27 63 8 0,15 2 31.66 505950788.00 19.0 27 63 8 0,15 2 31.66 505950808.70 19.0 32 72 10 0,15 2 45.09 505950879.00 19.0 32 72 10 0,15 2 45.09 505950909.70 22.0 32 72 10 0,15 2 45.09 50595097
10.00 22.0 32 72 10 0,15 2 45.09 5059510010.70 26.0 38 83 12 0,15 2 65.38 5059510711.00 26.0 38 83 12 0,15 2 65.38 5059511011.70 26.0 38 83 12 0,15 2 65.38 5059511712.00 26.0 38 83 12 0,15 2 65.38 5059512013.70 26.0 38 83 14 0,15 2 81.50 5059513714.00 26.0 38 83 14 0,15 2 81.50 5059514015.70 32.0 44 92 16 0,15 2 105.47 5059515716.00 32.0 44 92 16 0,15 2 105.47 5059516017.70 32.0 44 92 18 0,15 2 176.90 5059517718.00 32.0 44 92 18 0,15 2 128.26 5059518019.70 38.0 54 104 20 0,15 2 231.47 5059519720.00 38.0 54 104 20 0,15 2 158.39 50595200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 133
13
Solid carbide end milling cutter, factory standard - Transition angle α = 15°
l2
Ød2
Ød1
l1
l3
Ød3
K
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 K
Z 50 900 ... 50 900 ...mm mm mm mm mm mm mm £ £0.2 0.2 0.18 0.6 55 3 0,02 2 67.99 509000210.2 0.2 0.18 1.0 55 3 0,02 2 68.94 509000220.2 0.2 0.18 1.6 55 3 0,02 2 69.65 509000230.2 0.2 0.18 2.0 55 3 0,02 2 70.47 509000240.3 0.3 0.28 0.9 55 3 0,03 2 67.99 509000310.3 0.3 0.28 1.5 55 3 0,03 2 68.94 509000320.3 0.3 0.28 2.4 55 3 0,03 2 69.65 509000330.3 0.3 0.28 3.0 55 3 0,03 2 70.47 509000340.4 0.4 0.37 1.2 55 3 0,04 2 67.99 509000410.4 0.4 0.37 2.0 55 3 0,04 2 68.94 509000420.4 0.4 0.37 3.2 55 3 0,04 2 69.65 509000430.4 0.4 0.37 4.0 55 3 0,04 2 70.47 509000440.5 0.5 0.45 1.5 55 3 0,05 2 66.57 509000510.5 0.5 0.45 2.5 55 3 0,05 2 67.28 509000520.5 0.5 0.45 4.0 55 3 0,05 2 67.99 509000530.5 0.5 0.45 5.0 55 3 0,05 2 68.94 509000540.6 0.6 0.58 2.0 55 3 0,06 2 56.10 509000610.6 0.6 0.58 3.0 55 3 0,06 2 55.89 509000620.6 0.6 0.58 5.0 65 3 0,06 2 60.87 509000630.6 0.6 0.58 6.0 65 3 0,06 2 64.43 509000640.8 0.8 0.77 2.5 55 3 0,08 2 55.89 509000810.8 0.8 0.77 4.0 55 3 0,08 2 55.89 509000820.8 0.8 0.77 6.5 65 3 0,08 2 62.17 509000830.8 0.8 0.77 8.0 65 3 0,08 2 64.43 509000841.0 1.0 0.95 3.0 55 3 0,1 2 55.89 509001011.0 1.0 0.95 5.0 55 3 0,1 2 55.89 509001021.0 1.0 0.95 8.0 65 3 0,1 2 59.09 509001031.0 1.0 0.95 10.0 65 3 0,1 2 64.43 509001041.0 1.0 0.95 12.0 65 3 0,1 2 66.08 509001051.2 1.2 1.15 3.0 55 3 0,12 2 55.89 509001211.2 1.2 1.15 6.0 55 3 0,12 2 55.89 509001221.2 1.2 1.15 10.0 65 3 0,12 2 62.17 509001231.2 1.2 1.15 12.0 65 3 0,12 2 64.43 509001241.3 1.3 1.25 4.0 55 3 0,12 2 55.89 509001311.3 1.3 1.25 7.0 55 3 0,12 2 56.10 509001321.3 1.3 1.25 11.0 65 3 0,12 2 62.17 509001331.3 1.3 1.25 13.0 65 3 0,12 2 66.08 509001341.5 1.5 1.44 5.0 55 3 0,12 2 56.10 509001511.5 1.5 1.44 7.5 55 3 0,12 2 55.89 509001521.5 1.5 1.44 12.0 65 3 0,12 2 66.08 509001531.5 1.5 1.44 15.0 65 3 0,12 2 64.43 509001541.6 1.6 1.52 5.0 55 3 0,12 2 56.10 509001611.6 1.6 1.52 8.0 55 3 0,12 2 56.10 509001621.6 1.6 1.52 13.0 65 3 0,12 2 62.17 509001631.6 1.6 1.52 16.0 65 3 0,12 2 66.08 509001641.8 1.8 1.72 5.5 55 3 0,12 2 55.89 509001811.8 1.8 1.72 9.0 55 3 0,12 2 56.10 509001821.8 1.8 1.72 14.5 65 3 0,12 2 62.17 509001831.8 1.8 1.72 18.0 65 3 0,12 2 66.08 509001842.0 2.0 1.92 6.0 55 3 0,13 2 55.89 50900201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
continued on next page
13 / 134 toolingcenter.com
Solid carbide end milling cutter, factory standard - Transition angle α = 15°
l2
Ød2
Ød1
l1
l3
Ød3
K
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 K
Z 50 900 ... 50 900 ...mm mm mm mm mm mm mm £ £2.0 2.0 1.92 10.0 55 3 0,13 2 55.89 509002022.0 2.0 1.92 14.0 55 3 0,13 2 59.09 509002032.0 2.0 1.92 16.0 65 3 0,13 2 66.08 509002042.0 2.0 1.92 20.0 65 3 0,13 2 64.43 509002052.3 2.3 2.22 7.0 55 3 0,13 2 55.89 509002312.3 2.3 2.22 11.5 55 3 0,13 2 56.10 509002322.3 2.3 2.22 18.5 65 3 0,13 2 59.09 509002332.3 2.3 2.22 20.0 65 3 0,13 2 66.08 509002342.3 2.3 2.22 23.0 65 3 0,13 2 66.08 509002353.0 3.0 2.90 9.0 65 6 0,15 2 59.09 509003013.0 3.0 2.90 15.0 65 6 0,15 2 66.08 509003023.0 3.0 2.90 24.0 100 6 0,15 2 71.66 509003033.0 3.0 2.90 30.0 100 6 0,15 2 74.51 509003044.0 4.0 3.90 12.0 65 6 0,15 2 66.08 509004014.0 4.0 3.90 20.0 65 6 0,15 2 66.08 509004024.0 4.0 3.90 32.0 100 6 0,15 2 74.51 509004034.0 4.0 3.90 40.0 100 6 0,15 2 77.00 509004045.0 5.0 4.90 15.0 65 6 0,15 2 66.08 509005015.0 5.0 4.90 25.0 65 6 0,15 2 66.08 509005025.0 5.0 4.90 40.0 100 6 0,15 2 77.00 509005035.0 5.0 4.90 50.0 100 6 0,15 2 79.38 509005046.0 6.0 5.90 18.0 65 6 0,15 2 66.08 509006016.0 6.0 5.90 30.0 100 6 0,15 2 74.51 509006026.0 6.0 5.90 48.0 100 6 0,15 2 79.38 509006036.0 6.0 5.90 60.0 100 6 0,15 2 81.71 50900604
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 135
13
Solid carbide end milling cutter, factory standard - With polished chip flutes
l2
Ød2
Ød1
l1
Kblank
PG V0Article no.
d1 h10 l2 l1 d2 h6 K
Z 50 640 ...mm mm mm mm mm £
3 12 40 3 0,05 2 20.30 506400304 14 40 4 0,05 2 21.49 506400405 16 50 5 0,05 2 24.69 506400506 18 50 6 0,05 2 31.68 506400608 20 63 8 0,05 2 47.11 5064008010 25 72 10 0,08 2 62.26 5064010012 30 83 12 0,08 2 86.14 5064012016 35 92 16 0,08 2 180.56 5064016020 45 104 20 0,08 2 255.20 50640200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ●
Solid Carbide milling cutters
13 / 136 toolingcenter.com
Solid carbide end milling cutter, DIN 6527
l2
Ød2
Ød1
l1
K
blank blank
PG V0 PG V0Article no. Article no.
d1 e8 l2 l1 d2 h5 K
Z 50 596 ... 50 597 ...mm mm mm mm mm £ £
3 5 50 6 0,15 2 17.09 505960303 8 57 6 0,15 2 22.35 505970304 8 54 6 0,15 2 17.81 505960404 11 57 6 0,15 2 21.01 505970405 9 54 6 0,15 2 18.39 505960505 13 57 6 0,15 2 22.70 505970506 10 54 6 0,15 2 18.39 505960606 13 57 6 0,15 2 23.49 505970608 12 58 8 0,15 2 21.54 505960808 19 63 8 0,15 2 27.06 50597080
10 14 66 10 0,15 2 30.14 5059610010 22 72 10 0,15 2 46.74 5059710012 16 73 12 0,15 2 45.21 5059612012 26 83 12 0,15 2 64.54 5059712014 18 75 14 0,15 2 60.99 5059614014 26 83 14 0,15 2 83.06 5059714016 22 82 16 0,15 2 68.81 5059616016 32 92 16 0,15 2 105.83 5059716018 24 84 18 0,15 2 89.03 5059618018 32 92 18 0,15 2 126.23 5059718020 26 92 20 0,15 2 119.01 5059620020 38 104 20 0,15 2 169.06 50597200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 137
13
Solid carbide end milling cutter, ≈ DIN 6527
l2
Ød2
Ød1
l1
blank
PG V0Article no.
d1 h6 l2 l1 d2 h6 Z 50 960 ...
mm mm mm mm £3 12 50 3 2 21.70 509600304 15 50 4 2 21.70 509600405 20 50 5 2 21.70 509600506 20 57 6 2 21.70 509600608 20 63 8 2 32.43 5096008010 25 73 10 2 44.47 5096010012 25 83 12 2 61.11 5096012014 30 83 14 2 96.22 5096014016 30 92 16 2 107.61 5096016020 38 104 20 2 134.30 50960200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 138 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank blank blank blank
PG V0 PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 590 ... 54 591 ... 54 590 ... 54 591 ... 54 590 ...
mm mm mm mm mm mm mm £ £ £ £ £2.7 5.0 2.5 12 19 55 6 2 19.83 54590027 19.83 545910272.7 8.0 2.5 15 22 58 6 2 22.70 54590028 22.70 545910283.0 3.5 2.8 12 55 6 2 20.14 545900333.0 5.0 2.8 12 19 55 6 2 19.83 54590031 19.83 545910313.0 3.5 2.8 15 58 6 2 21.84 545900343.0 8.0 2.8 15 22 58 6 2 22.70 54590032 22.70 545910323.0 3.5 2.8 24 67 6 2 26.66 545900353.7 6.5 3.5 12 19 55 6 2 19.83 54590037 19.83 545910373.7 10.5 3.5 20 26 62 6 2 22.70 54590038 22.70 545910384.0 4.5 3.8 12 55 6 2 20.14 545900434.0 6.5 3.8 12 19 55 6 2 19.83 54590041 19.83 545910414.0 4.5 3.8 20 62 6 2 21.84 545900444.0 10.5 3.8 20 26 62 6 2 22.70 54590042 22.70 545910424.0 4.5 3.8 32 74 6 2 26.66 545900454.7 8.0 4.5 15 22 58 6 2 19.83 54590047 19.83 545910474.7 13.0 4.5 25 34 70 6 2 22.70 54590048 22.70 545910485.0 5.5 4.8 15 58 6 2 20.14 545900535.0 8.0 4.8 15 22 58 6 2 19.83 54590051 19.83 545910515.0 5.5 4.8 25 70 6 2 21.84 545900545.0 13.0 4.8 25 34 70 6 2 22.70 54590052 22.70 545910525.0 5.5 4.8 40 88 6 2 27.47 545900555.7 10.0 5.5 18 22 58 6 2 19.83 54590057 19.83 545910575.7 16.0 5.5 30 34 70 6 2 22.70 54590058 22.70 545910586.0 7.0 5.8 18 58 6 2 20.14 545900636.0 10.0 5.8 18 22 58 6 2 19.83 54590061 19.83 545910616.0 7.0 5.8 30 70 6 2 21.84 545900646.0 16.0 5.8 30 34 70 6 2 22.70 54590062 22.70 545910626.0 7.0 5.8 48 88 6 2 27.47 545900656.7 13.0 6.4 24 28 64 8 2 28.52 54590067 28.52 545910676.7 21.0 6.4 40 44 80 8 2 32.48 54590068 32.48 545910687.0 13.0 6.7 24 28 64 8 2 28.52 54590071 28.52 545910717.0 21.0 6.7 40 44 80 8 2 32.48 54590072 32.48 545910727.7 13.0 7.4 24 28 64 8 2 28.52 54590077 28.52 545910777.7 21.0 7.4 40 44 80 8 2 32.48 54590078 32.48 545910788.0 9.0 7.7 24 64 8 2 28.52 545900838.0 13.0 7.7 24 28 64 8 2 28.52 54590081 28.52 545910818.0 9.0 7.7 40 80 8 2 32.03 545900848.0 21.0 7.7 40 44 80 8 2 32.48 54590082 32.48 545910828.0 9.0 7.7 64 104 8 2 41.29 545900858.7 16.0 8.4 30 34 74 10 2 46.03 54590087 46.03 545910878.7 26.0 8.4 50 54 94 10 2 51.96 54590088 51.96 545910889.0 16.0 8.7 30 34 74 10 2 46.03 54590091 46.03 545910919.0 26.0 8.7 50 54 94 10 2 51.96 54590092 51.96 545910929.7 16.0 9.4 30 34 74 10 2 46.03 54590097 46.03 545910979.7 26.0 9.4 50 54 94 10 2 51.96 54590098 51.96 5459109810.0 11.0 9.7 30 74 10 2 46.03 5459010310.0 16.0 9.7 30 34 74 10 2 46.03 54590101 46.03 5459110110.0 11.0 9.7 50 94 10 2 50.68 5459010410.0 26.0 9.7 50 54 94 10 2 51.96 54590102 51.96 5459110210.0 11.0 9.7 80 124 10 2 84.24 5459010510.7 19.0 10.3 36 40 85 12 2 59.95 54590107 59.95 54591107
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 139
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB blank blank blank blank blank
PG V0 PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 590 ... 54 591 ... 54 590 ... 54 591 ... 54 590 ...
mm mm mm mm mm mm mm £ £ £ £ £10.7 31.0 10.3 60 64 109 12 2 85.79 54590108 85.79 5459110811.0 19.0 10.6 36 40 85 12 2 59.95 54590111 59.95 5459111111.0 31.0 10.6 60 64 109 12 2 85.79 54590112 85.79 5459111211.7 19.0 11.3 36 40 85 12 2 59.95 54590117 59.95 5459111711.7 31.0 11.3 60 64 109 12 2 85.79 54590118 85.79 5459111812.0 13.0 11.6 36 85 12 2 59.95 5459012312.0 19.0 11.6 36 40 85 12 2 59.95 54590121 59.95 5459112112.0 13.0 11.6 96 145 12 2 108.82 5459012512.0 13.0 11.6 60 109 12 2 84.12 5459012412.0 31.0 11.6 60 64 109 12 2 85.79 54590122 85.79 5459112213.0 22.0 12.6 42 46 91 14 2 89.11 54590131 89.11 5459113113.0 36.0 12.6 70 74 119 14 2 124.09 54590132 124.09 5459113213.7 22.0 13.3 42 46 91 14 2 89.11 54590137 89.11 5459113713.7 36.0 13.3 70 74 119 14 2 124.09 54590138 124.09 5459113814.0 15.0 13.6 42 91 14 2 89.11 5459014314.0 22.0 13.6 42 46 91 14 2 89.11 54590141 89.11 5459114114.0 15.0 13.6 70 119 14 2 122.56 5459014414.0 36.0 13.6 70 74 119 14 2 124.09 54590142 124.09 5459114214.0 15.0 13.6 112 161 14 2 163.24 5459014515.0 25.0 14.5 48 52 100 16 2 144.51 54590151 144.51 5459115115.0 41.0 14.5 80 84 132 16 2 160.76 54590152 160.76 5459115215.7 25.0 15.2 48 52 100 16 2 144.51 54590157 144.51 5459115715.7 41.0 15.2 80 84 132 16 2 160.76 54590158 160.76 5459115816.0 17.0 15.5 48 100 16 2 144.51 5459016316.0 25.0 15.5 48 52 100 16 2 144.51 54590161 144.51 5459116116.0 17.0 15.5 80 132 16 2 159.44 5459016416.0 41.0 15.5 80 84 132 16 2 160.76 54590162 160.76 5459116216.0 17.0 15.5 128 180 16 2 213.08 5459016518.0 20.0 17.5 54 106 18 2 183.18 5459018318.0 29.0 17.5 54 58 106 18 2 184.37 54590181 184.37 5459118118.0 20.0 17.5 90 142 18 2 200.62 5459018418.0 47.0 17.5 90 94 142 18 2 210.58 54590182 210.58 5459118218.0 20.0 17.5 144 196 18 2 270.39 5459018519.7 32.0 19.2 60 64 114 20 2 201.81 54590197 201.81 5459119719.7 52.0 19.2 100 104 154 20 2 230.51 54590198 230.51 5459119820.0 22.0 19.5 60 114 20 2 194.33 5459020320.0 32.0 19.5 60 64 114 20 2 201.81 54590201 201.81 5459120120.0 22.0 19.5 100 154 20 2 214.26 5459020420.0 52.0 19.5 100 104 154 20 2 230.51 54590202 230.51 5459120220.0 22.0 19.5 160 214 20 2 296.48 5459020524.7 40.0 24.2 75 80 136 25 2 310.25 54590247 310.25 5459124724.7 65.0 24.2 125 130 186 25 2 429.82 54590248 429.82 5459124825.0 27.0 24.5 75 136 25 2 293.98 5459025325.0 40.0 24.5 75 80 136 25 2 310.25 54590251 310.25 5459125125.0 27.0 24.5 125 186 25 2 413.57 5459025425.0 65.0 24.5 125 130 186 25 2 429.82 54590252 429.82 5459125225.0 27.0 24.5 200 260 25 2 585.48 54590255
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 140 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB Ti 1005 Ti 1005 Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 592 ... 54 593 ... 54 592 ... 54 593 ... 54 592 ...
mm mm mm mm mm mm mm £ £ £ £ £2.7 5.0 2.5 12 19 55 6 2 28.52 54592027 28.52 545930272.7 8.0 2.5 15 22 58 6 2 31.66 54592028 31.66 545930283.0 3.5 2.8 12 55 6 2 29.66 545920333.0 5.0 2.8 12 19 55 6 2 28.52 54592031 28.52 545930313.0 3.5 2.8 15 58 6 2 30.50 545920343.0 8.0 2.8 15 22 58 6 2 31.66 54592032 31.66 545930323.0 3.5 2.8 24 67 6 2 36.54 545920353.7 6.5 3.5 12 19 55 6 2 28.52 54592037 28.52 545930373.7 10.5 3.5 20 26 62 6 2 31.66 54592038 31.66 545930384.0 4.5 3.8 12 55 6 2 29.66 545920434.0 6.5 3.8 12 19 55 6 2 28.52 54592041 28.52 545930414.0 4.5 3.8 20 62 6 2 30.50 545920444.0 10.5 3.8 20 26 62 6 2 31.66 54592042 31.66 545930424.0 4.5 3.8 32 74 6 2 36.54 545920454.7 8.0 4.5 15 22 58 6 2 28.52 54592047 28.52 545930474.7 13.0 4.5 25 34 70 6 2 31.66 54592048 31.66 545930485.0 5.5 4.8 15 58 6 2 29.66 545920535.0 8.0 4.8 15 22 58 6 2 28.52 54592051 28.52 545930515.0 5.5 4.8 25 70 6 2 30.50 545920545.0 13.0 4.8 25 34 70 6 2 31.66 54592052 31.66 545930525.0 5.5 4.8 40 88 6 2 37.15 545920555.7 10.0 5.5 18 22 58 6 2 28.52 54592057 28.52 545930575.7 16.0 5.5 30 34 70 6 2 31.66 54592058 31.66 545930586.0 7.0 5.8 18 58 6 2 29.66 545920636.0 10.0 5.8 18 22 58 6 2 28.52 54592061 28.52 545930616.0 7.0 5.8 30 70 6 2 30.50 545920646.0 16.0 5.8 30 34 70 6 2 31.66 54592062 31.66 545930626.0 7.0 5.8 48 88 6 2 37.15 545920656.7 13.0 6.4 24 28 64 8 2 39.62 54592067 39.62 545930676.7 21.0 6.4 40 44 80 8 2 42.49 54592068 42.49 545930687.0 13.0 6.7 24 28 64 8 2 39.62 54592071 39.62 545930717.0 21.0 6.7 40 44 80 8 2 42.49 54592072 42.49 545930727.7 13.0 7.4 24 28 64 8 2 39.62 54592077 39.62 545930777.7 21.0 7.4 40 44 80 8 2 42.49 54592078 42.49 545930788.0 9.0 7.7 24 64 8 2 39.62 545920838.0 13.0 7.7 24 28 64 8 2 39.62 54592081 39.62 545930818.0 9.0 7.7 40 80 8 2 41.79 545920848.0 21.0 7.7 40 44 80 8 2 42.49 54592082 42.49 545930828.0 9.0 7.7 64 104 8 2 51.86 545920858.7 16.0 8.4 30 34 74 10 2 56.92 54592087 56.92 545930878.7 26.0 8.4 50 54 94 10 2 63.83 54592088 63.83 545930889.0 16.0 8.7 30 34 74 10 2 56.92 54592091 56.92 545930919.0 26.0 8.7 50 54 94 10 2 63.83 54592092 63.83 545930929.7 16.0 9.4 30 34 74 10 2 56.92 54592097 56.92 545930979.7 26.0 9.4 50 54 94 10 2 63.83 54592098 63.83 5459309810.0 11.0 9.7 30 74 10 2 56.92 5459210310.0 16.0 9.7 30 34 74 10 2 56.92 54592101 56.92 5459310110.0 11.0 9.7 50 94 10 2 62.53 5459210410.0 26.0 9.7 50 54 94 10 2 63.83 54592102 63.83 5459310210.0 11.0 9.7 80 124 10 2 98.24 5459210510.7 19.0 10.3 36 40 85 12 2 71.59 54592107 71.59 54593107
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 141
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3l5
l5 with Shank DIN 6535 HB Ti 1005 Ti 1005 Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 592 ... 54 593 ... 54 592 ... 54 593 ... 54 592 ...
mm mm mm mm mm mm mm £ £ £ £ £10.7 31.0 10.3 60 64 109 12 2 100.61 54592108 100.61 5459310811.0 19.0 10.6 36 40 85 12 2 71.59 54592111 71.59 5459311111.0 31.0 10.6 60 64 109 12 2 100.61 54592112 100.61 5459311211.7 19.0 11.3 36 40 85 12 2 71.59 54592117 71.59 5459311711.7 31.0 11.3 60 64 109 12 2 100.61 54592118 100.61 5459311812.0 13.0 11.6 36 85 12 2 71.59 5459212312.0 19.0 11.6 36 40 85 12 2 71.59 54592121 71.59 5459312112.0 13.0 11.6 96 145 12 2 124.09 5459212512.0 13.0 11.6 60 109 12 2 98.95 5459212412.0 31.0 11.6 60 64 109 12 2 100.61 54592122 100.61 5459312213.0 22.0 12.6 42 46 91 14 2 102.39 54592131 102.39 5459313113.0 36.0 12.6 70 74 119 14 2 140.83 54592132 140.83 5459313213.7 22.0 13.3 42 46 91 14 2 102.39 54592137 102.39 5459313713.7 36.0 13.3 70 74 119 14 2 144.51 54592138 140.83 5459313814.0 15.0 13.6 42 91 14 2 102.39 5459214314.0 22.0 13.6 42 46 91 14 2 102.39 54592141 102.39 5459314114.0 15.0 13.6 70 119 14 2 139.51 5459214414.0 36.0 13.6 70 74 119 14 2 140.83 54592142 140.83 5459314214.0 15.0 13.6 112 161 14 2 179.37 5459214515.0 25.0 14.5 48 52 100 16 2 163.24 54592151 163.24 5459315115.0 41.0 14.5 80 84 132 16 2 179.37 54592152 179.37 5459315215.7 25.0 15.2 48 52 100 16 2 163.24 54592157 163.24 5459315715.7 41.0 15.2 80 84 132 16 2 179.37 54592158 179.37 5459315816.0 17.0 15.5 48 100 16 2 163.24 5459216316.0 25.0 15.5 48 52 100 16 2 163.24 54592161 163.24 5459316116.0 17.0 15.5 80 132 16 2 178.19 5459216416.0 41.0 15.5 80 84 132 16 2 179.37 54592162 179.37 5459316216.0 17.0 15.5 128 180 16 2 231.70 5459216518.0 20.0 17.5 54 106 18 2 214.26 5459218318.0 29.0 17.5 54 58 106 18 2 203.11 54592181 203.11 5459318118.0 20.0 17.5 90 142 18 2 219.25 5459218418.0 47.0 17.5 90 94 142 18 2 229.22 54592182 229.22 5459318218.0 20.0 17.5 144 196 18 2 289.00 5459218519.7 32.0 19.2 60 64 114 20 2 216.76 54592197 223.04 5459319719.7 52.0 19.2 100 104 154 20 2 252.94 54592198 252.94 5459319820.0 22.0 19.5 60 114 20 2 213.08 5459220320.0 32.0 19.5 60 64 114 20 2 216.76 54592201 216.76 5459320120.0 22.0 19.5 100 154 20 2 236.68 5459220420.0 52.0 19.5 100 104 154 20 2 252.94 54592202 252.94 5459320220.0 22.0 19.5 160 214 20 2 318.90 5459220524.7 40.0 24.2 75 80 136 25 2 327.67 54592247 327.67 5459324724.7 65.0 24.2 125 130 186 25 2 447.27 54592248 447.27 5459324825.0 27.0 24.5 75 136 25 2 311.43 5459225325.0 40.0 24.5 75 80 136 25 2 327.67 54592251 327.67 5459325125.0 27.0 24.5 125 186 25 2 431.00 5459225425.0 65.0 24.5 125 130 186 25 2 447.27 54592252 447.27 5459325225.0 27.0 24.5 200 260 25 2 604.22 54592255
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 142 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
r
l5 with Shank DIN 6535 HB
blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 54 594 ... 54 595 ... 54 594 ... 54 595 ...
mm mm mm mm mm mm mm mm £ £ £ £3 0.2 5.0 2.8 12 19 55 6 2 22.00 54594031 22.00 545950313 0.2 8.0 2.8 15 22 58 6 2 22.00 54594032 22.00 545950323 0.3 5.0 2.8 12 19 55 6 2 22.00 54594033 22.00 545950333 0.3 8.0 2.8 15 22 58 6 2 22.00 54594034 22.00 545950343 0.5 5.0 2.8 12 19 55 6 2 22.00 54594035 22.00 545950353 0.5 8.0 2.8 15 22 58 6 2 22.00 54594036 22.00 545950364 0.3 6.5 3.8 12 19 55 6 2 22.00 54594041 22.00 545950414 0.3 10.5 3.8 20 26 62 6 2 23.85 54594042 23.85 545950424 0.5 6.5 3.8 12 19 55 6 2 22.00 54594043 22.00 545950434 0.5 10.5 3.8 20 26 62 6 2 23.85 54594044 23.85 545950444 1.0 6.5 3.8 12 19 55 6 2 22.00 54594045 22.00 545950454 1.0 10.5 3.8 20 26 62 6 2 23.85 54594046 23.85 545950465 0.3 8.0 4.8 15 22 58 6 2 22.70 54594051 22.70 545950515 0.3 13.0 4.8 25 34 70 6 2 25.75 54594052 25.75 545950525 0.5 8.0 4.8 15 22 58 6 2 22.70 54594053 22.70 545950535 0.5 13.0 4.8 25 34 70 6 2 25.75 54594054 25.75 545950545 1.0 8.0 4.8 15 22 58 6 2 22.70 54594055 22.70 545950555 1.0 13.0 4.8 25 34 70 6 2 25.75 54594056 25.75 545950566 0.3 10.0 5.8 18 22 58 6 2 23.49 54594061 23.49 545950616 0.3 16.0 5.8 30 34 70 6 2 25.75 54594062 25.75 545950626 0.5 10.0 5.8 18 22 58 6 2 23.49 54594063 23.49 545950636 0.5 16.0 5.8 30 34 70 6 2 25.75 54594064 25.75 545950646 1.0 10.0 5.8 18 22 58 6 2 23.49 54594065 23.49 545950656 1.0 16.0 5.8 30 34 70 6 2 25.75 54594066 25.75 545950668 0.3 13.0 7.7 24 28 64 8 2 31.66 54594081 31.66 545950818 0.3 21.0 7.7 40 44 80 8 2 35.96 54594082 35.96 545950828 0.5 13.0 7.7 24 28 64 8 2 31.66 54594083 31.66 545950838 0.5 21.0 7.7 40 44 80 8 2 35.96 54594084 35.96 545950848 1.0 13.0 7.7 24 28 64 8 2 31.66 54594085 31.66 545950858 1.0 21.0 7.7 40 44 80 8 2 35.96 54594086 35.96 54595086
10 0.3 16.0 9.7 30 34 74 10 2 49.01 54594101 49.01 5459510110 0.5 26.0 9.7 50 54 94 10 2 55.05 54594102 55.05 5459510210 1.0 16.0 9.7 30 34 74 10 2 49.01 54594103 49.01 5459510310 1.0 26.0 9.7 50 54 94 10 2 55.05 54594104 55.05 5459510410 1.5 16.0 9.7 30 34 74 10 2 49.01 54594105 49.01 5459510510 1.5 26.0 9.7 50 54 94 10 2 55.05 54594106 55.05 5459510612 1.0 19.0 11.6 36 40 85 12 2 63.08 54594121 63.08 5459512112 1.0 31.0 11.6 60 64 109 12 2 89.69 54594122 89.69 5459512212 1.5 19.0 11.6 36 40 85 12 2 63.08 54594123 63.08 5459512312 1.5 31.0 11.6 60 64 109 12 2 89.69 54594124 89.69 5459512412 2.0 19.0 11.6 36 40 85 12 2 63.08 54594125 63.08 5459512512 2.0 31.0 11.6 60 64 109 12 2 89.69 54594126 89.69 5459512616 2.0 25.0 15.5 48 52 100 16 2 149.48 54594161 149.48 5459516116 2.0 41.0 15.5 80 84 132 16 2 169.41 54594162 169.41 5459516216 2.5 25.0 15.5 48 52 100 16 2 150.79 54594163 150.79 5459516316 2.5 41.0 15.5 80 84 132 16 2 170.72 54594164 170.72 5459516416 3.0 25.0 15.5 48 52 100 16 2 150.79 54594165 150.79 5459516516 4.0 41.0 15.5 80 84 132 16 2 170.72 54594166 170.72 5459516620 2.0 32.0 19.5 60 64 114 20 2 204.29 54594201 198.12 5459520120 2.0 52.0 19.5 100 104 154 20 2 234.19 54594202 234.19 5459520220 2.5 32.0 19.5 60 64 114 20 2 204.29 54594203 204.29 5459520320 2.5 52.0 19.5 100 104 154 20 2 235.50 54594204 235.50 54595204
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 143
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
r
l5 with Shank DIN 6535 HB
blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 54 594 ... 54 595 ... 54 594 ... 54 595 ...
mm mm mm mm mm mm mm mm £ £ £ £20 3.0 32.0 19.5 60 64 114 20 2 204.29 54594205 204.29 5459520520 4.0 32.0 19.5 60 64 114 20 2 204.29 54594206 204.29 5459520620 4.0 52.0 19.5 100 104 154 20 2 235.50 54594207 235.50 5459520725 2.0 40.0 24.5 75 80 136 25 2 312.73 54594251 312.73 5459525125 2.0 65.0 24.5 125 130 186 25 2 437.30 54594252 437.30 5459525225 4.0 40.0 24.5 75 80 136 25 2 313.91 54594253 313.91 5459525325 4.0 65.0 24.5 125 130 186 25 2 437.30 54594254 437.30 54595254
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 144 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
r
l5 with Shank DIN 6535 HB
Ti 1005 Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 54 596 ... 54 597 ... 54 596 ... 54 597 ...
mm mm mm mm mm mm mm mm £ £ £ £3 0.2 5.0 2.8 12 19 55 6 2 31.68 54596031 31.68 545970313 0.2 8.0 2.8 15 22 58 6 2 31.68 54596032 31.68 545970323 0.3 5.0 2.8 12 19 55 6 2 31.68 54596033 31.68 545970333 0.3 8.0 2.8 15 22 58 6 2 31.68 54596034 31.68 545970343 0.5 5.0 2.8 12 19 55 6 2 31.68 54596035 31.68 545970353 0.5 8.0 2.8 15 22 58 6 2 31.68 54596036 31.68 545970364 0.3 6.5 3.8 12 19 55 6 2 31.68 54596041 31.68 545970414 0.3 10.5 3.8 20 26 62 6 2 32.48 54596042 32.48 545970424 0.5 6.5 3.8 12 19 55 6 2 31.68 54596043 31.68 545970434 0.5 10.5 3.8 20 26 62 6 2 32.48 54596044 32.48 545970444 1.0 6.5 3.8 12 19 55 6 2 31.68 54596045 31.68 545970454 1.0 10.5 3.8 20 26 62 6 2 32.48 54596046 32.48 545970465 0.3 8.0 4.8 15 22 58 6 2 31.66 54596051 31.66 545970515 0.3 13.0 4.8 25 34 70 6 2 34.45 54596052 34.45 545970525 0.5 8.0 4.8 15 22 58 6 2 31.66 54596053 31.66 545970535 0.5 13.0 4.8 25 34 70 6 2 34.45 54596054 34.45 545970545 1.0 8.0 4.8 15 22 58 6 2 31.66 54596055 31.66 545970555 1.0 13.0 4.8 25 34 70 6 2 34.45 54596056 34.45 545970566 0.3 10.0 5.8 18 22 58 6 2 32.13 54596061 32.13 545970616 0.3 16.0 5.8 30 34 70 6 2 34.45 54596062 34.45 545970626 0.5 10.0 5.8 18 22 58 6 2 32.13 54596063 32.13 545970636 0.5 16.0 5.8 30 34 70 6 2 34.45 54596064 34.45 545970646 1.0 10.0 5.8 18 22 58 6 2 32.13 54596065 32.13 545970656 1.0 16.0 5.8 30 34 70 6 2 34.45 54596066 34.45 545970668 0.3 13.0 7.7 24 28 64 8 2 42.14 54596081 42.14 545970818 0.3 21.0 7.7 40 44 80 8 2 45.63 54596082 45.63 545970828 0.5 13.0 7.7 24 28 64 8 2 42.14 54596083 42.14 545970838 0.5 21.0 7.7 40 44 80 8 2 45.63 54596084 45.63 545970848 1.0 13.0 7.7 24 28 64 8 2 42.14 54596085 42.14 545970858 1.0 21.0 7.7 40 44 80 8 2 45.63 54596086 45.63 54597086
10 0.3 16.0 9.7 30 34 74 10 2 60.99 54596101 60.99 5459710110 0.5 26.0 9.7 50 54 94 10 2 66.80 54596102 66.80 5459710210 1.0 16.0 9.7 30 34 74 10 2 60.99 54596103 60.99 5459710310 1.0 26.0 9.7 50 54 94 10 2 66.80 54596104 66.80 5459710410 1.5 16.0 9.7 30 34 74 10 2 60.99 54596105 60.99 5459710510 1.5 26.0 9.7 50 54 94 10 2 66.80 54596106 66.80 5459710612 1.0 19.0 11.6 36 40 85 12 2 74.72 54596121 74.72 5459712112 1.0 31.0 11.6 60 64 109 12 2 104.53 54596122 104.53 5459712212 1.5 19.0 11.6 36 40 85 12 2 74.72 54596123 74.72 5459712312 1.5 31.0 11.6 60 64 109 12 2 104.53 54596124 104.53 5459712412 2.0 19.0 11.6 36 40 85 12 2 74.72 54596125 74.72 5459712512 2.0 31.0 11.6 60 64 109 12 2 104.53 54596126 104.53 5459712616 2.0 25.0 15.5 48 52 100 16 2 166.93 54596161 166.93 5459716116 2.0 41.0 15.5 80 84 132 16 2 188.16 54596162 188.16 5459716216 2.5 25.0 15.5 48 52 100 16 2 168.23 54596163 168.23 5459716316 2.5 41.0 15.5 80 84 132 16 2 189.34 54596164 189.34 5459716416 3.0 25.0 15.5 48 52 100 16 2 168.23 54596165 168.23 5459716516 4.0 41.0 15.5 80 84 132 16 2 189.34 54596166 189.34 5459716620 2.0 32.0 19.5 60 64 114 20 2 226.72 54596201 226.72 5459720120 2.0 52.0 19.5 100 104 154 20 2 256.61 54596202 256.61 5459720220 2.5 32.0 19.5 60 64 114 20 2 226.72 54596203 226.72 5459720320 2.5 52.0 19.5 100 104 154 20 2 257.92 54596204 257.92 54597204
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 145
13
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3l5
r
l5 with Shank DIN 6535 HB
Ti 1005 Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 54 596 ... 54 597 ... 54 596 ... 54 597 ...
mm mm mm mm mm mm mm mm £ £ £ £20 3.0 32.0 19.5 60 64 114 20 2 226.72 54596205 226.72 5459720520 4.0 32.0 19.5 60 64 114 20 2 226.72 54596206 226.72 5459720620 4.0 52.0 19.5 100 104 154 20 2 257.92 54596207 257.92 5459720725 2.0 40.0 24.5 75 80 136 25 2 331.36 54596251 331.36 5459725125 2.0 65.0 24.5 125 130 186 25 2 454.73 54596252 454.73 5459725225 4.0 40.0 24.5 75 80 136 25 2 331.36 54596253 331.36 5459725325 4.0 65.0 24.5 125 130 186 25 2 454.73 54596254 454.73 54597254
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 146 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l5
K
l5 with Shank DIN 6535 HB blank blank blank
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 601 ... 50 601 ... 50 604 ...mm mm mm mm mm mm £ £ £2.0 8 32 2.0 0,08 3 11.19 506010202.5 8 32 2.5 0,08 3 11.19 506010252.8 8 21 57 6.0 0,08 3 24.57 50604028 1)
3.0 12 32 3.0 0,15 3 11.19 506010303.0 8 21 57 6.0 0,15 3 24.57 506040303.5 12 32 3.5 0,15 3 11.19 506010353.8 11 21 57 6.0 0,15 3 24.57 50604038 1)
4.0 12 40 4.0 0,15 3 11.54 506010404.0 11 21 57 6.0 0,15 3 24.57 506040404.5 14 50 4.5 0,15 3 14.08 506010454.8 13 21 57 6.0 0,15 3 24.57 50604048 1)
5.0 14 50 5.0 0,15 3 14.08 506010505.0 13 21 57 6.0 0,15 3 24.57 506040505.5 16 50 5.5 0,15 3 16.61 506010555.8 13 21 57 6.0 0,15 3 24.57 50604058 1)
6.0 16 14 50 6.0 0,15 3 16.61 506010606.0 13 21 57 6.0 0,15 3 24.57 506040606.5 16 50 6.5 0,15 3 21.54 506010656.8 16 27 63 8.0 0,15 3 27.28 50604068 1)
7.0 20 60 7.0 0,15 3 21.54 506010707.0 16 27 63 8.0 0,15 3 27.28 506040707.5 20 60 7.5 0,15 3 21.65 506010757.8 19 27 63 8.0 0,15 3 27.28 50604078 1)
8.0 20 24 60 8.0 0,15 3 21.65 506010808.0 19 27 63 8.0 0,15 3 27.28 506040808.5 20 60 8.5 0,15 3 28.98 506010858.7 19 32 72 10.0 0,15 3 44.27 50604087 1)
9.0 20 60 9.0 0,15 3 28.98 506010909.0 19 32 72 10.0 0,15 3 44.27 506040909.5 22 70 9.5 0,15 3 34.45 506010959.7 22 32 72 10.0 0,15 3 44.27 50604097 1)
10.0 22 30 70 10.0 0,15 3 34.45 5060110010.0 22 32 72 10.0 0,15 3 44.27 5060410010.7 26 38 83 12.0 0,15 3 68.94 50604107 1)
11.0 22 70 11.0 0,15 3 45.63 5060111011.0 26 38 83 12.0 0,15 3 68.94 5060411011.7 26 38 83 12.0 0,15 3 68.94 50604117 1)
12.0 22 25 70 12.0 0,15 3 45.63 5060112012.0 26 38 83 12.0 0,15 3 68.94 5060412012.7 26 38 83 14.0 0,15 3 84.36 50604127 1)
13.0 25 75 13.0 0,15 3 66.44 5060113013.7 26 38 83 14.0 0,15 3 84.36 50604137 1)
14.0 25 30 75 14.0 0,15 3 62.88 5060114014.0 26 38 83 14.0 0,15 3 84.36 5060414015.0 25 75 15.0 0,15 3 87.80 5060115015.7 32 44 92 16.0 0,15 3 111.42 50604157 1)
16.0 22 27 75 16.0 0,15 3 82.71 5060116016.0 32 44 92 16.0 0,15 3 111.42 5060416017.7 32 44 92 18.0 0,15 3 131.57 50604177 1)
18.0 32 44 92 18.0 0,15 3 131.57 5060418018.0 32 52 100 18.0 0,15 3 115.56 5060118019.7 38 54 104 20.0 0,15 3 173.69 50604197 1)
20.0 32 50 100 20.0 0,15 3 122.44 5060120020.0 38 54 104 20.0 0,15 3 173.69 50604200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
1) not according to DIN 6529
Solid Carbide milling cutters
toolingcenter.com 13 / 147
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l5
K
Ti 1000
PG V0Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 605 ...mm mm mm mm mm mm £2.8 8 21 57 6 0,08 3 30.15 50605028 1)
3.0 8 21 57 6 0,15 3 30.15 506050303.8 11 21 57 6 0,15 3 30.15 50605038 1)
4.0 11 21 57 6 0,15 3 30.15 506050404.8 13 21 57 6 0,15 3 30.15 50605048 1)
5.0 13 21 57 6 0,15 3 30.15 506050505.8 13 21 57 6 0,15 3 30.15 50605058 1)
6.0 13 21 57 6 0,15 3 30.15 506050606.8 16 27 63 8 0,15 3 35.60 50605068 1)
7.0 16 27 63 8 0,15 3 35.60 506050707.8 19 27 63 8 0,15 3 35.60 50605078 1)
8.0 19 27 63 8 0,15 3 35.60 506050808.7 19 32 72 10 0,15 3 52.61 50605087 1)
9.0 19 32 72 10 0,15 3 52.61 506050909.7 22 32 72 10 0,15 3 52.61 50605097 1)
10.0 22 32 72 10 0,15 3 52.61 5060510010.7 26 38 83 12 0,15 3 75.69 50605107 1)
11.0 26 38 83 12 0,15 3 75.69 5060511011.7 26 38 83 12 0,15 3 75.69 50605117 1)
12.0 26 38 83 12 0,15 3 75.69 5060512012.7 26 38 83 14 0,15 3 96.57 50605127 1)
13.7 26 38 83 14 0,15 3 96.57 50605137 1)
14.0 26 38 83 14 0,15 3 96.57 5060514015.7 32 44 92 16 0,15 3 113.89 50605157 1)
16.0 32 44 92 16 0,15 3 113.89 5060516017.7 32 44 92 18 0,15 3 145.45 50605177 1)
18.0 32 44 92 18 0,15 3 145.45 5060518019.7 38 54 104 20 0,15 3 183.18 50605197 1)
20.0 38 54 104 20 0,15 3 183.18 50605200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
1) not according to DIN 6529
Solid Carbide milling cutters
13 / 148 toolingcenter.com
Solid carbide mini milling cutter, factory standard - Shank similar to DIN 6535
l2
Ød2
Ød1
l1
l3l5
l5 with Shank DIN 6535 HB blank
PG V0Article no.
d1 e8 l2 l3 l5 l1 d2 h5 Z 50 598 ...
mm mm mm mm mm mm £2.00 4 4.0 10 35 6 3 13.89 505980202.50 4 4.0 10 35 6 3 14.56 505980253.00 5 5.0 10 36 6 3 13.89 505980303.50 5 5.0 10 36 6 3 14.56 505980354.00 7 7.0 12 38 6 3 13.86 505980404.50 7 7.0 12 38 6 3 14.56 505980455.00 8 8.0 13 39 6 3 13.86 505980505.50 8 8.0 13 39 6 3 14.56 505980555.75 8 8.0 13 39 6 3 14.56 505980576.00 8 8.5 13 39 6 3 13.86 505980606.75 11 11.5 16 43 8 3 19.47 505980677.00 11 11.5 16 43 8 3 18.63 505980707.75 11 11.5 16 43 8 3 19.83 505980778.00 11 11.5 16 43 8 3 21.49 505980808.70 13 13.5 18 50 10 3 30.50 505980879.00 13 13.5 18 50 10 3 27.37 505980909.70 13 13.5 18 50 10 3 30.50 5059809710.00 13 13.5 18 50 10 3 29.80 5059810012.00 15 15.5 24 55 12 3 39.52 5059812014.00 15 15.5 26 58 14 3 67.63 5059814016.00 18 18.5 28 62 16 3 75.58 5059816018.00 20 20.5 35 70 18 3 95.28 5059818020.00 22 22.5 40 75 20 3 121.61 50598200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 149
13
Solid carbide mini milling cutter, factory standard - Shank similar to DIN 6535
l2
Ød2
Ød1
l1
l3l5
l5 with Shank DIN 6535 HB Ti 1000
PG V0Article no.
d1 e8 l2 l3 l5 l1 d2 h5 Z 50 599 ...
mm mm mm mm mm mm £2.00 4 4.0 10 35 6 3 19.32 505990202.50 4 4.0 10 35 6 3 19.94 505990253.00 5 5.0 10 36 6 3 19.32 505990303.50 5 5.0 10 36 6 3 19.94 505990354.00 7 7.0 12 38 6 3 18.28 505990404.50 7 7.0 12 38 6 3 19.94 505990455.00 8 8.0 13 39 6 3 18.39 505990505.50 8 8.0 13 39 6 3 20.14 505990555.75 8 8.0 13 39 6 3 20.14 505990576.00 8 8.5 13 39 6 3 18.39 505990606.75 11 11.5 16 43 8 3 24.69 505990677.00 11 11.5 16 43 8 3 23.38 505990707.75 11 11.5 16 43 8 3 25.28 505990778.00 11 11.5 16 43 8 3 24.92 505990808.70 13 13.5 18 50 10 3 37.15 505990879.00 13 13.5 18 50 10 3 33.64 505990909.70 13 13.5 18 50 10 3 37.15 5059909710.00 13 13.5 18 50 10 3 35.72 5059910012.00 15 15.5 24 55 12 3 46.28 5059912014.00 15 15.5 26 58 14 3 73.09 5059914016.00 18 18.5 28 62 16 3 83.41 5059916018.00 20 20.5 35 70 18 3 104.40 5059918020.00 22 22.5 40 75 20 3 129.20 50599200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 150 toolingcenter.com
Solid carbide mini milling cutter, factory standard - Shank similar to DIN 6535
l2
Ød2
Ød1
l1
l5
K
blank blank
PG V0 PG V0Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 608 ... 50 608 ...mm mm mm mm mm mm £ £0.50 1.5 45 3 0,08 3 14.90 506080051.00 2.0 45 3 0,08 3 14.90 506080101.50 3.0 45 3 0,08 3 14.90 506080151.80 3.0 45 3 0,08 3 14.90 506080182.00 4.0 19 45 6 0,08 3 15.73 506080202.50 6.0 19 45 6 0,15 3 15.73 506080252.80 6.0 19 45 6 0,15 3 15.73 506080283.00 6.0 19 45 6 0,15 3 15.73 506080303.80 7.0 19 45 6 0,15 3 16.74 506080384.00 7.0 19 45 6 0,15 3 16.74 506080404.80 8.0 19 45 6 0,15 3 17.09 506080485.00 8.0 19 45 6 0,15 3 17.09 506080505.75 10.0 19 45 6 0,15 3 17.09 506080576.00 10.0 19 45 6 0,15 3 17.09 506080606.75 10.0 26 55 8 0,15 3 24.34 506080677.00 12.0 26 55 8 0,15 3 24.34 506080707.75 12.0 26 55 8 0,15 3 24.34 506080788.00 13.0 26 55 8 0,15 3 24.34 506080808.70 14.0 28 55 10 0,15 3 34.45 506080879.70 16.0 28 55 10 0,15 3 34.45 50608097
10.00 16.0 28 55 10 0,15 3 34.45 50608100
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 151
13
Solid carbide mini milling cutter, factory standard - Shank similar to DIN 6535
l2
Ød2
Ød1
l1
l5
K
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 K
Z 50 609 ... 50 609 ...mm mm mm mm mm mm £ £0.50 1.5 45 3 0,08 3 18.63 506090051.00 2.0 45 3 0,08 3 18.63 506090101.50 3.0 45 3 0,08 3 18.63 506090151.80 3.0 45 3 0,08 3 18.63 506090182.00 4.0 19 45 6 0,08 3 19.32 506090202.50 6.0 19 45 6 0,15 3 19.32 506090252.80 6.0 19 45 6 0,15 3 19.32 506090283.00 6.0 19 45 6 0,15 3 19.32 506090303.80 7.0 19 45 6 0,15 3 19.32 506090384.00 7.0 19 45 6 0,15 3 19.32 506090404.80 8.0 19 45 6 0,15 3 19.32 506090485.00 8.0 19 45 6 0,15 3 19.32 506090505.75 10.0 19 45 6 0,15 3 19.32 506090576.00 10.0 19 45 6 0,15 3 19.32 506090606.75 10.0 26 55 8 0,15 3 19.32 506090677.00 12.0 26 55 8 0,15 3 19.32 506090707.75 12.0 26 55 8 0,15 3 27.47 506090788.00 13.0 26 55 8 0,15 3 27.47 506090808.70 14.0 28 55 10 0,15 3 33.29 506090879.70 16.0 28 55 10 0,15 3 33.29 50609097
10.00 16.0 28 55 10 0,15 3 33.29 50609100
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ○ ● ●
Solid Carbide milling cutters
13 / 152 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l3
Ød3
r
blank Ti 1005
PG V0 PG V0Article no. Article no.
d1 h6 r ±0,01 l2 d3 l3 l1 d2 h5 Z 54 620 ... 54 622 ...
mm mm mm mm mm mm mm £ £3 0.4 3.5 2.8 12 55 6 3 24.09 54620034 33.35 546220343 0.6 3.5 2.8 12 55 6 3 24.09 54620035 33.35 546220354 0.4 4.5 3.8 12 55 6 3 24.09 54620044 33.35 546220444 0.6 4.5 3.8 12 55 6 3 24.09 54620046 33.35 546220465 0.4 5.5 4.8 15 58 6 3 24.09 54620054 33.35 546220545 0.6 5.5 4.8 15 58 6 3 24.09 54620056 33.35 546220566 0.4 7.0 5.8 18 58 6 3 24.09 54620064 33.35 546220646 0.6 7.0 5.8 18 58 6 3 24.09 54620066 33.35 546220668 0.4 9.0 7.7 24 64 8 3 33.35 54620084 43.91 546220848 0.6 9.0 7.7 24 64 8 3 33.35 54620086 43.91 546220868 0.8 9.0 7.7 24 64 8 3 33.35 54620087 43.91 5462208710 1.6 11.0 9.7 30 74 10 3 49.47 54620103 62.17 5462210312 2.0 13.0 11.6 36 85 12 3 65.38 54620124 77.12 5462212414 0.6 15.0 13.6 42 91 14 3 93.38 54620146 106.54 5462214614 0.8 15.0 13.6 42 91 14 3 93.38 54620147 106.54 5462214716 1.6 17.0 15.5 48 100 16 3 120.43 54620163 133.35 5462216316 3.2 17.0 15.5 48 100 16 3 121.38 54620167 134.54 5462216718 1.6 20.0 17.5 54 106 18 3 150.79 54620183 165.75 5462218320 3.2 22.0 19.5 60 114 20 3 225.54 54620207 250.45 5462220720 5.0 22.0 19.5 60 114 20 3 225.54 54620209 250.45 54622209
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 153
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3
l5
l5 with Shank DIN 6535 HB
blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 610 ... 54 610 ... 54 611 ... 54 610 ...
mm mm mm mm mm mm mm £ £ £ £3 3.5 2.8 12 55 6 3 21.49 546100333 3.5 2.8 15 58 6 3 23.49 546100343 3.5 2.8 24 67 6 3 28.95 546100353 8.0 2.8 15 22 58 6 3 23.49 54610032 23.49 546110324 4.5 3.8 12 55 6 3 21.49 546100434 4.5 3.8 20 62 6 3 23.49 546100444 4.5 3.8 32 74 6 3 28.95 546100454 10.5 3.8 20 26 62 6 3 24.34 54610042 24.34 546110425 5.5 4.8 15 58 6 3 21.49 546100535 5.5 4.8 25 70 6 3 23.49 546100545 5.5 4.8 40 88 6 3 28.95 546100555 13.0 4.8 25 34 70 6 3 24.34 54610052 24.34 546110526 7.0 5.8 18 58 6 3 21.49 546100636 7.0 5.8 30 70 6 3 23.49 546100646 7.0 5.8 48 88 6 3 28.95 546100656 16.0 5.8 30 34 70 6 3 24.34 54610062 24.34 546110627 21.0 6.7 40 44 80 8 3 35.36 54610072 35.36 546110728 9.0 7.7 24 64 8 3 30.15 546100838 9.0 7.7 40 80 8 3 33.69 546100848 9.0 7.7 64 104 8 3 41.44 546100858 21.0 7.7 40 44 80 8 3 35.36 54610082 35.36 546110829 26.0 8.7 50 54 94 10 3 55.76 54610092 55.76 54611092
10 11.0 9.7 30 74 10 3 47.82 5461010310 11.0 9.7 50 94 10 3 52.21 5461010410 11.0 9.7 80 124 10 3 95.63 5461010510 26.0 9.7 50 54 94 10 3 55.76 54610102 55.76 5461110211 31.0 10.6 60 64 109 12 3 92.55 54610112 92.55 5461111212 13.0 11.6 36 85 12 3 61.56 5461012312 13.0 11.6 96 145 12 3 127.06 5461012512 13.0 11.6 60 109 12 3 96.46 5461012412 31.0 11.6 60 64 109 12 3 92.55 54610122 92.55 5461112213 36.0 12.6 70 74 119 14 3 134.54 54610132 134.54 5461113214 15.0 13.6 42 91 14 3 89.03 5461014314 15.0 13.6 70 119 14 3 139.51 5461014414 15.0 13.6 112 161 14 3 185.68 5461014514 36.0 13.6 70 74 119 14 3 134.54 54610142 134.54 5461114215 17.0 14.5 48 100 16 3 117.82 5461015315 17.0 14.5 80 132 16 3 180.69 5461015415 41.0 14.5 80 84 132 16 3 175.72 54610152 175.72 5461115216 17.0 15.5 48 100 16 3 117.82 5461016316 17.0 15.5 80 132 16 3 180.69 5461016416 17.0 15.5 128 180 16 3 240.48 5461016516 41.0 15.5 80 84 132 16 3 175.72 54610162 175.72 5461116218 20.0 17.5 54 106 18 3 148.30 5461018318 20.0 17.5 90 142 18 3 226.72 5461018418 20.0 17.5 144 196 18 3 305.26 5461018518 47.0 17.5 90 94 142 18 3 220.55 54610182 220.55 5461118220 22.0 19.5 60 114 20 3 220.55 5461020320 22.0 19.5 100 154 20 3 241.68 5461020420 22.0 19.5 160 214 20 3 335.15 5461020520 52.0 19.5 100 104 154 20 3 235.50 54610202 235.50 5461120225 27.0 24.5 75 136 25 3 402.41 5461025325 27.0 24.5 125 186 25 3 470.87 54610254
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 154 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3
l5
l5 with Shank DIN 6535 HB
Ti 1005 Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 612 ... 54 612 ... 54 613 ... 54 612 ...
mm mm mm mm mm mm mm £ £ £ £3 3.5 2.8 12 55 6 3 30.15 546120333 3.5 2.8 15 58 6 3 32.13 546120343 3.5 2.8 24 67 6 3 37.49 546120353 8.0 2.8 15 22 58 6 3 32.13 54612032 32.13 546130324 4.5 3.8 12 55 6 3 30.15 546120434 4.5 3.8 20 62 6 3 32.13 546120444 4.5 3.8 32 74 6 3 37.49 546120454 10.5 3.8 20 26 62 6 3 33.64 54612042 33.64 546130425 5.5 4.8 15 58 6 3 30.15 546120535 5.5 4.8 25 70 6 3 32.13 546120545 5.5 4.8 40 88 6 3 37.49 546120555 13.0 4.8 25 34 70 6 3 33.64 54612052 33.64 546130526 7.0 5.8 18 58 6 3 30.15 546120636 7.0 5.8 30 70 6 3 32.13 546120646 7.0 5.8 48 88 6 3 37.49 546120656 16.0 5.8 30 34 70 6 3 33.64 54612062 33.64 546130627 21.0 6.7 40 44 80 8 3 45.98 54612072 45.98 546130728 9.0 7.7 24 64 8 3 41.29 546120838 9.0 7.7 40 80 8 3 44.27 546120848 9.0 7.7 64 104 8 3 51.80 546120858 21.0 7.7 40 44 80 8 3 45.98 54612082 45.98 546130829 26.0 8.7 50 54 94 10 3 68.81 54612092 68.81 54613092
10 11.0 9.7 30 74 10 3 58.43 5461210310 11.0 9.7 50 94 10 3 64.19 5461210410 11.0 9.7 80 124 10 3 109.98 5461210510 26.0 9.7 50 54 94 10 3 68.81 54612102 68.81 5461310211 31.0 10.6 60 64 109 12 3 108.91 54612112 108.91 5461311212 13.0 11.6 36 85 12 3 74.51 5461212312 13.0 11.6 96 145 12 3 140.83 5461212512 13.0 11.6 60 109 12 3 113.19 5461212412 31.0 11.6 60 64 109 12 3 108.91 54612122 108.91 5461312213 36.0 12.6 70 74 119 14 3 153.28 54612132 153.28 5461313214 15.0 13.6 42 91 14 3 103.93 5461214314 15.0 13.6 70 119 14 3 158.26 5461214414 15.0 13.6 112 161 14 3 203.11 5461214514 36.0 13.6 70 74 119 14 3 153.28 54612142 153.28 5461314215 17.0 14.5 48 100 16 3 132.06 5461215315 17.0 14.5 80 132 16 3 201.81 5461215415 41.0 14.5 80 84 132 16 3 195.64 54612152 195.64 5461315216 17.0 15.5 48 100 16 3 132.06 5461216316 17.0 15.5 80 132 16 3 201.81 5461216416 17.0 15.5 128 180 16 3 261.61 5461216516 41.0 15.5 80 84 132 16 3 195.64 54612162 195.64 5461316218 20.0 17.5 54 106 18 3 163.24 5461218318 20.0 17.5 90 142 18 3 247.95 5461218418 20.0 17.5 144 196 18 3 325.18 5461218518 47.0 17.5 90 94 142 18 3 241.68 54612182 241.68 5461318220 22.0 19.5 60 114 20 3 241.68 5461220320 22.0 19.5 100 154 20 3 267.88 5461220420 22.0 19.5 160 214 20 3 360.07 5461220520 52.0 19.5 100 104 154 20 3 260.41 54612202 260.41 5461320225 27.0 24.5 75 136 25 3 419.86 5461225325 27.0 24.5 125 186 25 3 489.62 54612254
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 155
13
Solid carbide end milling cutter, ≈ DIN 6527
l2
Ød2
Ød1
l1
l5l3
Ød3
K
Ti 1010 Ti 1010 Ti 1010
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h5 K
Z 50 951 ... 50 951 ... 50 951 ...mm mm mm mm mm mm mm mm £ £ £3.0 8 2.9 15 21 57 6 0,15 3 47.22 509510313.5 11 3.4 16 21 57 6 0,15 3 47.22 509510364.0 8 3.9 15 18 54 6 0,15 3 41.79 509510404.0 11 3.9 16 21 57 6 0,15 3 41.79 509510414.0 16 26 62 6 0,15 3 43.76 509510424.5 13 4.4 19 21 57 6 0,15 3 47.22 509510465.0 9 4.9 16 18 54 6 0,15 3 41.79 509510505.0 13 4.9 19 21 57 6 0,15 3 41.79 509510515.0 17 26 62 6 0,15 3 43.76 509510525.5 13 5.4 19 21 57 6 0,15 3 49.59 509510566.0 10 5.9 17 18 54 6 0,25 3 43.30 509510606.0 13 5.9 19 21 57 6 0,25 3 43.76 509510616.0 18 26 62 6 0,25 3 49.59 509510626.5 19 6.3 25 27 63 8 0,25 3 56.45 509510667.0 19 6.8 25 27 63 8 0,25 3 56.45 509510717.5 19 7.3 25 27 63 8 0,25 3 56.45 509510768.0 12 7.8 20 22 58 8 0,25 3 50.19 509510808.0 19 7.8 25 27 63 8 0,25 3 51.10 509510818.0 24 32 68 8 0,25 3 55.89 509510828.5 22 8.2 30 32 72 10 0,25 3 95.99 509510869.0 22 8.7 30 32 72 10 0,25 3 95.99 509510919.5 22 9.2 30 32 72 10 0,25 3 95.99 5095109610.0 14 9.7 24 26 66 10 0,25 3 79.25 5095110010.0 22 9.7 30 32 72 10 0,25 3 87.91 5095110110.0 30 40 80 10 0,25 3 97.18 5095110212.0 16 11.7 26 28 73 12 0,25 3 111.17 5095112012.0 26 11.7 36 38 83 12 0,25 3 118.88 5095112112.0 36 48 93 12 0,25 3 134.90 5095112214.0 18 13.7 28 30 75 14 0,25 3 137.39 5095114014.0 26 13.7 36 38 83 14 0,25 3 156.84 5095114114.0 42 54 99 14 0,25 3 173.93 5095114216.0 22 15.5 32 34 82 16 0,25 3 165.50 5095116016.0 32 15.5 42 44 92 16 0,25 3 273.22 5095116116.0 48 60 108 16 0,25 3 268.24 5095116218.0 24 17.5 34 36 84 18 0,25 3 229.09 5095118018.0 32 17.5 42 44 92 18 0,25 3 274.42 5095118118.0 54 66 114 18 0,25 3 346.66 5095118220.0 38 19.5 38 54 104 20 0,25 3 319.73 5095120120.0 26 19.5 40 42 92 20 0,25 3 280.58 5095120020.0 60 76 126 20 0,25 3 400.52 50951202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 290-291● ● ○ ○ ●
Solid Carbide milling cutters
13 / 156 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, ≈ DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3
r
l5 with Shank DIN 6535 HB Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 50 952 ... 50 952 ...
mm mm mm mm mm mm mm mm £ £4 0.5 8 3.9 15 18 54 6 3 41.79 509520404 0.5 11 3.9 16 21 57 6 3 43.66 509520415 0.5 9 4.9 16 18 54 6 3 41.79 509520505 0.5 13 4.9 19 21 57 6 3 43.66 509520516 0.5 10 5.9 17 18 54 6 3 43.56 509520606 0.5 13 5.9 19 21 57 6 3 49.93 509520618 1.0 12 7.8 20 22 58 8 3 51.15 509520808 1.0 19 7.8 25 27 63 8 3 58.27 50952081
10 1.0 14 9.7 24 26 66 10 3 92.06 5095210010 1.0 22 9.7 30 32 72 10 3 99.89 5095210112 1.5 16 11.7 26 28 73 12 3 127.54 5095212012 1.5 26 11.7 36 38 83 12 3 135.96 5095212116 2.0 22 15.5 32 34 82 16 3 258.40 5095216016 2.0 32 15.5 42 44 92 16 3 265.87 5095216120 2.0 26 19.5 40 42 92 20 3 373.59 5095220020 2.0 38 19.5 52 54 104 20 3 382.14 50952201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 290-291● ● ○ ○ ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 157
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l3l5
K
blank
PG V0Article no.
d1 e8 l2 l3 l5 l1 d2 h5 K
Z 50 612 ...mm mm mm mm mm mm mm £3.0 5 12 14 50 6 0,15 3 21.84 506120303.5 6 13 14 50 6 0,15 3 24.21 506120354.0 8 15 18 54 6 0,15 3 21.84 506120404.5 8 15 18 54 6 0,15 3 24.21 506120455.0 9 16 18 54 6 0,15 3 21.84 506120505.5 10 17 18 54 6 0,15 3 24.21 506120556.0 10 17 18 54 6 0,15 3 21.84 506120606.5 11 19 22 58 8 0,15 3 28.98 506120657.0 11 19 22 58 8 0,15 3 28.52 506120707.5 12 20 22 58 8 0,15 3 28.60 506120758.0 12 20 22 58 8 0,15 3 23.87 506120808.5 13 23 26 66 10 0,15 3 37.97 506120859.0 13 23 26 66 10 0,15 3 39.15 506120909.5 14 24 26 66 10 0,15 3 38.80 50612095
10.0 14 24 26 66 10 0,15 3 37.15 5061210011.0 16 26 28 73 12 0,15 3 60.51 5061211012.0 16 26 28 73 12 0,15 3 52.57 5061212014.0 18 28 30 75 14 0,15 3 72.84 5061214016.0 22 32 34 82 16 0,15 3 79.49 5061216018.0 24 34 36 84 18 0,15 3 105.24 5061218020.0 26 40 42 92 20 0,15 3 133.35 50612200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ○ ●
Solid Carbide milling cutters
13 / 158 toolingcenter.com
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l5
K
blank blank
PG V0 PG V0Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 Z 50 614 ... 50 614 ...
mm mm mm mm mm £ £3.0 8 21 57 6 3 21.19 506140303.5 11 21 57 6 3 23.38 506140353.5 15 23 59 6 3 36.07 506140364.0 11 21 57 6 3 21.19 506140404.0 19 27 63 6 3 36.07 506140414.5 13 21 57 6 3 23.38 506140454.5 19 27 63 6 3 36.07 506140465.0 13 21 57 6 3 20.84 506140505.0 24 32 68 6 3 39.15 506140515.5 13 21 57 6 3 23.38 506140555.5 24 32 68 6 3 39.15 506140566.0 13 21 57 6 3 21.19 506140606.0 24 32 68 6 3 37.97 506140616.5 16 27 63 8 3 27.47 506140656.5 30 44 80 8 3 53.87 506140667.0 16 27 63 8 3 26.66 506140707.0 30 44 80 8 3 53.87 506140717.5 19 27 63 8 3 25.14 506140757.5 30 44 80 8 3 53.87 506140768.0 19 27 63 8 3 24.69 506140808.0 38 52 88 8 3 49.59 506140818.5 19 32 72 10 3 37.95 506140858.5 38 48 88 10 3 84.95 506140869.0 19 32 72 10 3 37.95 506140909.0 38 48 88 10 3 84.95 506140919.5 22 32 72 10 3 44.27 506140959.5 38 48 88 10 3 84.95 50614096
10.0 22 32 72 10 3 39.62 5061410010.0 45 55 95 10 3 82.71 5061410111.0 26 38 83 12 3 62.88 5061411011.0 45 57 102 12 3 119.01 5061411112.0 26 38 83 12 3 56.95 5061412012.0 53 65 110 12 3 119.01 5061412114.0 26 38 83 14 3 73.09 5061414014.0 53 65 110 14 3 151.14 5061414116.0 32 44 92 16 3 100.14 5061416016.0 63 75 123 16 3 207.85 5061416118.0 32 44 92 18 3 121.38 5061418018.0 63 75 123 18 3 250.92 5061418120.0 38 54 104 20 3 157.55 5061420020.0 75 91 141 20 3 335.04 50614201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 159
13
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l5l3
Ød3
K
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h5 K
Z 50 613 ... 50 615 ... 50 615 ...mm mm mm mm mm mm mm mm £ £ £3.0 5 12 14 50 6 0,15 3 27.06 506130303.0 8 2.8 15 21 57 6 0,15 3 24.92 506150303.5 6 13 14 50 6 0,15 3 28.63 506130353.5 11 3.3 15 21 57 6 0,15 3 25.85 506150353.5 15 23 59 6 0,15 3 38.80 506150364.0 8 15 18 54 6 0,15 3 26.31 506130404.0 11 3.8 15 21 57 6 0,15 3 23.99 506150404.0 19 27 63 6 0,15 3 42.49 506150414.5 8 15 18 54 6 0,15 3 29.43 506130454.5 13 4.3 21 21 57 6 0,15 3 25.85 506150454.5 19 27 63 6 0,15 3 38.80 506150465.0 9 16 18 54 6 0,15 3 26.94 506130505.0 13 4.8 21 21 57 6 0,15 3 23.99 506150505.0 24 32 68 6 0,15 3 41.89 506150515.5 10 17 18 54 6 0,15 3 28.63 506130555.5 13 5.3 21 21 57 6 0,15 3 25.85 506150555.5 24 32 68 6 0,15 3 41.89 506150566.0 10 17 18 54 6 0,15 3 26.94 506130606.0 13 5.8 21 21 57 6 0,15 3 23.99 506150606.0 24 32 68 6 0,15 3 40.81 506150616.5 11 19 22 58 8 0,15 3 36.32 506130656.5 16 6.3 27 27 63 8 0,15 3 32.87 506150656.5 30 44 80 8 0,15 3 57.78 506150667.0 11 19 22 58 8 0,15 3 37.15 506130707.0 16 6.8 27 27 63 8 0,15 3 31.31 506150707.0 30 44 80 8 0,15 3 57.78 506150717.5 12 20 22 58 8 0,15 3 34.80 506130757.5 19 7.3 27 27 63 8 0,15 3 30.15 506150757.5 30 44 80 8 0,15 3 58.13 506150768.0 12 20 22 58 8 0,15 3 34.80 506130808.0 21 7.8 27 27 63 8 0,15 3 30.50 506150808.0 38 52 88 8 0,15 3 53.78 506150818.5 13 23 26 66 10 0,15 3 51.10 506130858.5 21 8.3 32 32 72 10 0,15 3 48.41 506150858.5 38 48 88 10 0,15 3 93.38 506150869.0 13 23 26 66 10 0,15 3 50.62 506130909.0 21 8.8 32 32 72 10 0,15 3 47.58 506150909.0 38 48 88 10 0,15 3 92.67 506150919.5 14 24 26 66 10 0,15 3 53.78 506130959.5 22 9.3 32 32 72 10 0,15 3 52.33 506150959.5 38 48 88 10 0,15 3 91.83 50615096
10.0 14 24 26 66 10 0,15 3 48.41 5061310010.0 22 9.8 32 32 72 10 0,15 3 43.65 5061510010.0 45 55 95 10 0,15 3 86.61 5061510111.0 16 26 28 73 12 0,15 3 67.39 5061311011.0 26 10.8 38 32 83 12 0,15 3 71.59 5061511011.0 45 57 102 12 0,15 3 127.66 5061511112.0 16 26 28 73 12 0,15 3 60.51 5061312012.0 26 11.8 38 38 83 12 0,15 3 66.23 5061512012.0 53 65 110 12 0,15 3 127.66 5061512114.0 18 28 30 75 14 0,15 3 82.71 50613140
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
continued on next page
13 / 160 toolingcenter.com
Solid Carbide End Milling Cutter, ≈ DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
l5l3
Ød3
K
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 e8 l2 d3 l3 l5 l1 d2 h5 K
Z 50 613 ... 50 615 ... 50 615 ...mm mm mm mm mm mm mm mm £ £ £14.0 26 13.8 38 38 83 14 0,15 3 84.60 5061514014.0 53 65 110 14 0,15 3 160.53 5061514116.0 22 32 34 82 16 0,15 3 98.70 5061316016.0 36 15.7 44 44 92 16 0,15 3 115.08 5061516016.0 63 75 123 16 0,15 3 217.70 5061516118.0 24 34 36 84 18 0,15 3 129.20 5061318018.0 36 17.7 44 44 92 18 0,15 3 141.18 5061518018.0 63 75 123 18 0,15 3 267.17 5061518120.0 26 40 42 92 20 0,15 3 170.60 5061320020.0 41 19.7 54 54 104 20 0,15 3 180.93 5061520020.0 75 91 141 20 0,15 3 353.42 50615201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 161
13
Solid carbide end milling cutter, ≈ DIN 6527 - With polished chip flutes - quiet running with irregular pitch
l2
Ød2
Ød1
l1
K
l3
blank
PG V0Article no.
d1 h10 l2 l3 l1 d2 h6 K
Z 50 581 ...mm mm mm mm mm mm £
3 10 11.5 57 6 0,05 3 25.28 505810304 13 14.5 57 6 0,05 3 25.28 505810405 15 16.5 57 6 0,05 3 25.28 505810506 18 18.5 57 6 0,05 3 25.28 505810607 20 21.5 63 8 0,05 3 51.50 505810708 20 20.5 63 8 0,05 3 49.04 505810809 22 23.5 72 10 0,08 3 51.50 5058109010 25 26.0 72 10 0,08 3 51.50 5058110012 30 31.0 83 12 0,08 3 84.18 5058112014 30 31.0 83 14 0,08 3 95.75 5058114016 35 36.0 92 16 0,08 3 125.04 5058116018 35 36.0 92 18 0,08 3 154.36 5058118020 45 46.0 104 20 0,08 3 183.77 50581200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
13 / 162 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l5
l5 with Shank DIN 6535 HB blank blank
PG V0 PG V0Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 Z 50 626 ... 50 626 ...
mm mm mm mm mm £ £2.0 8 32 2.0 4 15.55 506260202.5 8 32 2.5 4 15.55 506260253.0 12 32 3.0 4 15.55 506260303.5 12 32 3.5 4 15.48 506260354.0 12 40 4.0 4 15.48 506260404.5 14 50 4.5 4 19.47 506260455.0 14 50 5.0 4 19.47 506260505.5 16 50 5.5 4 22.00 506260556.0 14 14 50 6.0 4 22.00 506260606.5 16 50 6.5 4 29.66 506260657.0 20 60 7.0 4 29.66 506260707.5 20 60 7.5 4 30.14 506260758.0 20 24 60 8.0 4 30.14 506260808.5 20 60 8.5 4 39.11 506260859.0 20 60 9.0 4 39.11 506260909.5 22 70 9.5 4 46.79 5062609510.0 22 30 70 10.0 4 46.79 5062610011.0 22 70 11.0 4 63.01 5062611012.0 22 25 70 12.0 4 63.01 5062612013.0 25 75 13.0 4 90.17 5062613014.0 25 30 75 14.0 4 85.18 5062614015.0 25 75 15.0 4 119.01 5062615016.0 25 27 75 16.0 4 112.48 5062616018.0 32 52 100 18.0 4 156.60 5062618020.0 32 50 100 20.0 4 166.10 50626200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 163
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l5
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 e8 l2 l5 l1 d2 h5 Z 50 627 ... 50 627 ... 50 661 ...
mm mm mm mm mm £ £ £2.0 8 32 2.0 4 16.89 506270202.5 8 32 2.5 4 16.89 506270253.0 12 32 3.0 4 16.89 506270303.0 30 60 3.0 4 35.70 506610303.5 12 32 3.5 4 17.35 506270354.0 12 40 4.0 4 17.35 506270404.0 30 75 4.0 4 36.86 506610404.5 14 50 4.5 4 20.30 506270455.0 14 50 5.0 4 20.30 506270505.0 35 75 5.0 4 41.82 506610505.5 16 50 5.5 4 22.20 506270556.0 14 14 50 6.0 4 22.20 506270606.0 40 100 6.0 4 47.00 506610606.5 16 50 6.5 4 27.28 506270657.0 20 60 7.0 4 27.28 506270707.5 20 60 7.5 4 27.77 506270758.0 20 24 60 8.0 4 27.77 506270808.0 40 100 8.0 4 58.52 506610808.5 20 60 8.5 4 34.76 506270859.0 20 60 9.0 4 34.76 506270909.5 22 70 9.5 4 40.35 5062709510.0 22 30 70 10.0 4 40.35 5062710010.0 40 100 10.0 4 83.40 5066110011.0 22 70 11.0 4 51.38 5062711012.0 22 25 70 12.0 4 51.38 5062712012.0 45 100 12.0 4 108.52 5066112013.0 25 75 13.0 4 70.71 5062713014.0 25 30 75 14.0 4 66.92 5062714014.0 45 100 14.0 4 141.92 5066114015.0 25 75 15.0 4 91.48 5062715016.0 25 27 75 16.0 4 86.50 5062716016.0 75 150 16.0 4 179.68 5066116018.0 32 52 100 18.0 4 118.40 5062718020.0 32 50 100 20.0 4 125.17 5062720020.0 75 150 20.0 4 264.92 50661200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 164 toolingcenter.com
Solid carbide end milling cutter, ≈ DIN 6527
l2
Ød2
Ød1
l1
l3l5
K
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 l2 l3 l5 l1 d2 h6 K
Z 50 955 ... 50 955 ...mm mm mm mm mm mm mm £ £3.0 5 8 14 50 6 0,15 4 39.21 509550303.0 8 11 21 57 6 0,15 4 39.21 509550313.5 8 11 18 54 6 0,15 4 36.84 509550353.5 11 14 21 57 6 0,15 4 36.84 509550364.0 8 11 18 54 6 0,15 4 39.21 509550404.0 11 14 21 57 6 0,15 4 39.21 509550414.5 9 12 18 54 6 0,15 4 37.63 509550454.5 13 16 21 57 6 0,15 4 37.63 509550465.0 9 12 18 54 6 0,15 4 39.21 509550505.0 13 16 21 57 6 0,15 4 39.21 509550515.5 10 13 18 54 6 0,15 4 36.50 509550555.5 13 16 21 57 6 0,15 4 36.50 509550566.0 10 13 18 54 6 0,15 4 41.25 509550606.0 13 16 21 57 6 0,15 4 41.25 509550617.0 12 15 22 58 8 0,25 4 48.48 509550707.0 21 24 27 63 8 0,25 4 48.48 509550718.0 12 15 22 58 8 0,25 4 44.37 509550808.0 21 24 27 63 8 0,25 4 47.23 509550819.0 14 17 26 66 10 0,25 4 63.27 509550909.0 22 25 32 72 10 0,25 4 63.27 50955091
10.0 14 17 26 66 10 0,25 4 72.54 5095510010.0 22 25 32 72 10 0,25 4 81.02 5095510111.0 16 19 28 73 12 0,35 4 100.00 5095511011.0 26 29 38 83 12 0,35 4 100.00 5095511112.0 16 19 28 73 12 0,35 4 98.53 5095512012.0 26 29 38 83 12 0,35 4 109.83 5095512114.0 16 19 28 73 14 0,35 4 142.37 5095514014.0 26 29 38 83 14 0,35 4 157.62 5095514115.0 22 25 34 82 16 0,35 4 158.63 5095515015.0 36 39 44 92 16 0,35 4 158.63 5095515116.0 22 25 34 82 16 0,35 4 156.37 5095516016.0 36 39 44 92 16 0,35 4 204.28 5095516117.0 22 25 34 82 18 0,35 4 215.81 5095517017.0 36 39 44 92 18 0,35 4 215.81 5095517118.0 22 25 34 82 18 0,35 4 206.43 5095518018.0 36 39 44 92 18 0,35 4 227.44 5095518119.0 26 29 42 92 20 0,35 4 244.84 5095519019.0 41 44 54 104 20 0,35 4 244.84 5095519120.0 26 29 42 92 20 0,35 4 266.09 5095520020.0 41 44 54 104 20 0,35 4 295.13 50955201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 294-295● ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 165
13
Solid carbide end milling cutter, ≈ DIN 6527
l2
Ød2
Ød1
l1
l5 l3
Ød3
K
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l5 l1 d2 h5 K
Z 50 965 ... 50 965 ...mm mm mm mm mm mm mm mm £ £
3 6.5 2.8 9 19 55 6 0,15 4 42.94 509650303 6.5 2.8 15 22 58 6 0,15 4 42.94 509650314 8.5 3.8 12 19 55 6 0,15 4 42.94 509650404 8.5 3.8 20 26 62 6 0,15 4 42.94 509650415 10.5 4.8 15 22 58 6 0,15 4 42.94 509650505 10.5 4.8 25 34 70 6 0,15 4 42.94 509650516 13.0 5.8 18 22 58 6 0,15 4 45.20 509650606 13.0 5.8 30 34 70 6 0,15 4 45.20 509650618 17.0 7.7 24 28 64 8 0,25 4 45.20 509650808 17.0 7.7 40 44 80 8 0,25 4 50.85 50965081
10 21.0 9.7 30 34 74 10 0,25 4 81.36 5096510010 21.0 9.7 50 54 94 10 0,25 4 84.75 5096510112 25.0 11.6 36 40 85 12 0,35 4 103.95 5096512012 25.0 11.6 60 64 109 12 0,35 4 115.25 5096512114 29.0 13.6 42 46 91 14 0,35 4 148.02 5096514014 29.0 13.6 70 74 119 14 0,35 4 162.71 5096514116 33.0 15.5 48 52 100 16 0,35 4 175.58 5096516016 33.0 15.5 80 84 132 16 0,35 4 209.03 5096516118 38.0 17.5 54 58 106 18 0,35 4 221.85 5096518018 38.0 17.5 90 94 142 18 0,35 4 244.40 5096518120 42.0 19.5 60 64 114 20 0,35 4 271.17 5096520020 42.0 19.5 100 104 154 20 0,35 4 300.54 50965201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 294-295● ● ○ ○ ●
Solid Carbide milling cutters
13 / 166 toolingcenter.com
Solid carbide end milling cutter, ≈ DIN 6527
l2
Ød2
Ød1
l1
l5 l3
Ød3
K
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l5 l1 d2 h5 K
Z 50 954 ... 50 954 ...mm mm mm mm mm mm mm mm £ £
3 5 8 14 50 6 0,15 4 41.17 509540303 8 2.8 13 21 57 6 0,15 4 41.17 509540314 8 11 18 54 6 0,15 4 41.17 509540404 11 3.8 17 21 57 6 0,15 4 41.17 509540415 9 12 18 54 6 0,15 4 41.17 509540505 13 4.8 19 21 57 6 0,15 4 41.17 509540516 10 13 18 54 6 0,15 4 42.49 509540606 13 5.8 19 21 57 6 0,15 4 42.49 509540618 12 15 22 58 8 0,25 4 44.37 509540808 21 7.7 25 27 63 8 0,25 4 49.59 50954081
10 14 17 26 66 10 0,25 4 74.72 5095410010 22 9.7 30 32 72 10 0,25 4 85.08 5095410112 16 19 28 73 12 0,35 4 103.46 5095412012 26 11.6 36 38 83 12 0,35 4 115.32 5095412114 16 19 28 73 14 0,35 4 149.48 5095414014 26 13.6 36 38 83 14 0,35 4 165.50 5095414116 22 25 34 82 16 0,35 4 164.19 5095416016 36 15.5 42 44 92 16 0,35 4 214.51 5095416118 22 25 34 82 18 0,35 4 216.76 5095418018 36 17.5 42 44 92 18 0,35 4 238.83 5095418120 26 29 42 92 20 0,35 4 279.40 5095420020 41 19.5 52 54 104 20 0,35 4 309.89 50954201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 292-293● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 167
13
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l5 l3
Ød3
r
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 50 968 ... 50 968 ...
mm mm mm mm mm mm mm mm £ £3 0.10 8.0 2.8 13 21 57 6 4 43.91 509680303 0.40 8.0 2.8 13 21 57 6 4 43.91 509680313 0.50 8.0 2.8 13 21 57 6 4 43.91 509680323 1.00 8.0 2.8 13 21 57 6 4 43.91 509680333 0.30 6.5 2.8 15 22 58 6 4 51.50 509680343 0.50 6.5 2.8 15 22 58 6 4 51.50 509680353 0.80 6.5 2.8 15 22 58 6 4 51.50 509680364 0.10 11.0 3.8 17 21 57 6 4 43.91 509680404 0.40 11.0 3.8 17 21 57 6 4 43.91 509680414 0.50 11.0 3.8 17 21 57 6 4 43.91 509680424 1.00 11.0 3.8 17 21 57 6 4 43.91 509680434 0.40 8.5 3.8 20 26 62 6 4 51.50 509680444 0.50 8.5 3.8 20 26 62 6 4 51.50 509680454 0.80 8.5 3.8 20 26 62 6 4 51.50 509680465 0.10 13.0 4.8 19 21 57 6 4 43.76 509680505 0.50 13.0 4.8 19 21 57 6 4 43.76 509680515 1.00 13.0 4.8 19 21 57 6 4 43.76 509680525 0.50 10.5 4.8 25 34 70 6 4 52.33 509680535 0.80 10.5 4.8 25 34 70 6 4 52.33 509680546 0.10 13.0 5.8 19 21 57 6 4 43.56 509680606 0.50 13.0 5.8 19 21 57 6 4 43.56 509680616 1.00 13.0 5.8 19 21 57 6 4 43.56 509680626 1.50 13.0 5.8 19 21 57 6 4 43.56 509680636 0.60 13.0 5.8 30 34 70 6 4 52.33 509680646 0.80 13.0 5.8 30 34 70 6 4 52.33 509680656 1.00 13.0 5.8 30 34 70 6 4 52.33 509680668 0.15 21.0 7.7 25 27 63 8 4 53.43 509680808 0.50 21.0 7.7 25 27 63 8 4 53.43 509680818 1.00 21.0 7.7 25 27 63 8 4 53.43 509680828 1.50 21.0 7.7 25 27 63 8 4 53.43 509680838 2.00 21.0 7.7 25 27 63 8 4 53.43 509680848 0.80 17.0 7.7 40 44 80 8 4 63.36 509680858 1.00 17.0 7.7 40 44 80 8 4 63.36 509680868 1.50 17.0 7.7 40 44 80 8 4 63.36 509680878 2.00 17.0 7.7 40 44 80 8 4 63.36 5096808810 0.15 22.0 9.7 30 32 72 10 4 66.93 5096810010 0.50 22.0 9.7 30 32 72 10 4 66.93 5096810110 1.00 22.0 9.7 30 32 72 10 4 66.93 5096810210 1.50 22.0 9.7 30 32 72 10 4 66.93 5096810310 2.00 22.0 9.7 30 32 72 10 4 66.93 5096810410 0.50 21.0 9.7 50 54 94 10 4 78.42 5096810510 1.00 21.0 9.7 50 54 94 10 4 78.42 5096810610 1.50 21.0 9.7 50 54 94 10 4 78.42 5096810710 2.00 21.0 9.7 50 54 94 10 4 78.42 5096810812 0.20 26.0 11.6 36 38 83 12 4 105.24 5096812012 0.50 26.0 11.6 36 38 83 12 4 105.24 5096812112 1.00 26.0 11.6 36 38 83 12 4 105.24 5096812212 1.50 26.0 11.6 36 38 83 12 4 105.24 5096812312 2.00 26.0 11.6 36 38 83 12 4 105.24 5096812412 4.00 26.0 11.6 36 38 83 12 4 105.24 5096812512 0.50 25.0 11.6 60 64 109 12 4 119.11 5096812612 1.00 25.0 11.6 60 64 109 12 4 119.11 50968127
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 294-295● ● ○ ○ ●
Solid Carbide milling cutters
continued on next page
13 / 168 toolingcenter.com
Solid Carbide End Milling Cutter with Corner Radius, Factory Standard
l2
Ød2
Ød1
l1
l5 l3
Ød3
r
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l5 l1 d2 h5 Z 50 968 ... 50 968 ...
mm mm mm mm mm mm mm mm £ £12 1.50 25.0 11.6 60 64 109 12 4 119.11 5096812812 2.00 25.0 11.6 60 64 109 12 4 119.11 5096812912 4.00 25.0 11.6 60 64 109 12 4 119.11 5096813014 0.30 26.0 13.6 36 38 83 14 4 159.09 5096814014 1.00 26.0 13.6 36 38 83 14 4 159.09 5096814114 2.00 26.0 13.6 36 38 83 14 4 159.09 5096814214 4.00 26.0 13.6 36 38 83 14 4 159.09 5096814314 1.00 29.0 13.6 70 74 119 14 4 178.44 5096814414 2.00 29.0 13.6 70 74 119 14 4 178.44 5096814514 4.00 29.0 13.6 70 74 119 14 4 178.44 5096814616 0.30 36.0 15.5 42 44 92 16 4 159.09 5096816016 1.00 36.0 15.5 42 44 92 16 4 159.09 5096816116 2.00 36.0 15.5 42 44 92 16 4 159.09 5096816216 4.00 36.0 15.5 42 44 92 16 4 159.09 5096816316 1.00 33.0 15.5 80 84 132 16 4 195.75 5096816416 2.00 33.0 15.5 80 84 132 16 4 195.75 5096816516 4.00 33.0 15.5 80 84 132 16 4 195.75 5096816618 1.00 36.0 17.5 42 44 92 18 4 211.65 5096818018 2.00 36.0 17.5 42 44 92 18 4 211.65 5096818118 4.00 36.0 17.5 42 44 92 18 4 211.65 5096818218 1.00 38.0 17.5 90 94 142 18 4 236.09 5096818318 2.00 38.0 17.5 90 94 142 18 4 236.09 5096818418 4.00 38.0 17.5 90 94 142 18 4 236.09 5096818520 0.30 41.0 19.5 52 54 104 20 4 238.23 5096820020 1.00 41.0 19.5 52 54 104 20 4 238.23 5096820120 2.00 41.0 19.5 52 54 104 20 4 238.23 5096820220 4.00 41.0 19.5 52 54 104 20 4 238.23 5096820320 1.00 42.0 19.5 100 104 154 20 4 265.51 5096820420 2.00 42.0 19.5 100 104 154 20 4 265.51 5096820520 4.00 42.0 19.5 100 104 154 20 4 265.51 50968206
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 294-295● ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 169
13
Solid carbide end milling cutter, factory standard - With reinforced core Ø for increased stability!
l2
Ød2
Ød1
l1
l5 l3
Ød3
K
Ti 1010
PG V0Article no.
d1 f8 l2 d3 l3 l5 l1 d2 h5 K
Z 50 964 ...mm mm mm mm mm mm mm mm £
4 8 3.5 12 18 54 6 0,15 4 45.63 509640415 10 4.5 15 18 54 6 0,15 4 45.63 509640516 13 5.5 21 21 57 6 0,15 4 48.65 509640618 19 7.5 27 27 63 8 0,25 4 54.94 5096408110 22 9.5 32 32 72 10 0,25 4 95.75 5096410112 26 11.5 38 38 83 12 0,35 4 133.24 5096412114 26 13.5 38 38 83 14 0,35 4 186.74 5096414116 32 15.5 44 44 92 16 0,35 4 242.14 5096416118 36 17.5 44 44 92 18 0,35 4 269.78 5096418120 38 19.5 54 54 104 20 0,35 4 348.69 50964201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 294-295● ● ○ ○ ●
Solid Carbide milling cutters
13 / 170 toolingcenter.com
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3
l5
l5 with Shank DIN 6535 HB
blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 630 ... 54 631 ... 54 630 ... 54 631 ...
mm mm mm mm mm mm mm £ £ £ £6 10 5.8 18 22 58 6 4 22.00 54630061 22.00 546310616 16 5.8 30 34 70 6 4 23.51 54630062 23.51 546310627 13 6.7 24 28 64 8 4 32.03 54630071 32.03 546310717 21 6.7 40 44 80 8 4 35.36 54630072 35.36 546310728 13 7.7 24 28 64 8 4 32.03 54630081 32.03 546310818 21 7.7 40 44 80 8 4 35.36 54630082 35.36 546310829 16 8.7 30 34 74 10 4 49.83 54630091 49.83 546310919 26 8.7 50 54 94 10 4 55.76 54630092 55.76 54631092
10 16 9.7 30 34 74 10 4 49.83 54630101 49.83 5463110110 26 9.7 50 54 94 10 4 55.76 54630102 55.76 5463110211 19 10.6 36 40 85 12 4 65.38 54630111 65.38 5463111111 31 10.6 60 64 109 12 4 92.55 54630112 92.55 5463111212 19 11.6 36 40 85 12 4 65.38 54630121 65.38 5463112112 31 11.6 60 64 109 12 4 92.55 54630122 92.55 5463112213 22 12.6 42 46 91 14 4 93.85 54630131 93.85 5463113113 36 12.6 70 74 119 14 4 134.54 54630132 134.54 5463113214 22 13.6 42 46 91 14 4 93.85 54630141 93.85 5463114114 36 13.6 70 74 119 14 4 134.54 54630142 134.54 5463114215 25 14.5 48 52 100 16 4 122.09 54630151 122.09 5463115115 41 14.5 80 84 132 16 4 175.72 54630152 175.72 5463115216 25 15.5 48 52 100 16 4 122.09 54630161 122.09 5463116116 41 15.5 80 84 132 16 4 175.72 54630162 175.72 5463116218 29 17.5 54 58 106 18 4 153.28 54630181 153.28 5463118118 47 17.5 90 94 142 18 4 220.55 54630182 220.55 5463118220 32 19.5 60 64 114 20 4 175.72 54630201 175.72 5463120120 52 19.5 100 104 154 20 4 235.50 54630202 235.50 54631202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 171
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1
l3
Ød3
l5
l5 with Shank DIN 6535 HB
Ti 1005 Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 l2 d3 l3 l5 l1 d2 h5 Z 54 632 ... 54 633 ... 54 632 ... 54 633 ...
mm mm mm mm mm mm mm £ £ £ £6 10 5.8 18 22 58 6 4 31.68 54632061 31.68 546330616 16 5.8 30 34 70 6 4 34.18 54632062 34.18 546330627 13 6.7 24 28 64 8 4 42.14 54632071 42.14 546330717 21 6.7 40 44 80 8 4 45.98 54632072 45.98 546330728 13 7.7 24 28 64 8 4 42.14 54632081 42.14 546330818 21 7.7 40 44 80 8 4 45.98 54632082 45.98 546330829 16 8.7 30 34 74 10 4 61.82 54632091 61.82 546330919 26 8.7 50 54 94 10 4 68.81 54632092 68.81 54633092
10 16 9.7 30 34 74 10 4 61.82 54632101 61.82 5463310110 26 9.7 50 54 94 10 4 68.81 54632102 68.81 5463310211 19 10.6 36 40 85 12 4 77.59 54632111 77.59 5463311111 31 10.6 60 64 109 12 4 108.91 54632112 108.91 5463311212 19 11.6 36 40 85 12 4 77.59 54632121 77.59 5463312112 31 11.6 60 64 109 12 4 108.91 54632122 108.91 5463312213 22 12.6 42 46 91 14 4 107.48 54632131 107.48 5463313113 36 12.6 70 74 119 14 4 153.28 54632132 153.28 5463313214 22 13.6 42 46 91 14 4 107.48 54632141 107.48 5463314114 36 13.6 70 74 119 14 4 153.28 54632142 153.28 5463314215 25 14.5 48 52 100 16 4 135.85 54632151 135.85 5463315115 41 14.5 80 84 132 16 4 195.64 54632152 195.64 5463315216 25 15.5 48 52 100 16 4 135.85 54632161 135.85 5463316116 41 15.5 80 84 132 16 4 195.64 54632162 195.64 5463316218 29 17.5 54 58 106 18 4 169.41 54632181 169.41 5463318118 47 17.5 90 94 142 18 4 241.68 54632182 241.68 5463318220 32 19.5 60 64 114 20 4 195.64 54632201 195.64 5463320120 52 19.5 100 104 154 20 4 260.41 54632202 260.41 54633202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 172 toolingcenter.com
Solid carbide end milling cutter, DIN 6527
l2
Ød2
Ød1
l1
l5
Ød3
l3
K
l5 with Shank DIN 6535 HB Ti 400 Ti 400 Ti 400
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 h10 l2 d3 l3 l5 l1 d2 h6 K
Z 50 620 ... 50 621 ... 50 591 ...mm mm mm mm mm mm mm mm £ £ £
2 3 14 50 6 0,05 4 26.23 506200202 6 21 57 6 0,05 4 28.17 506210202 6 1.8 12.5 21 57 6 0,05 4 25.28 505910203 5 14 50 6 0,05 4 26.23 506200303 8 21 57 6 0,05 4 28.17 506210303 8 2.8 14.5 21 57 6 0,05 4 25.28 505910304 8 18 54 6 0,05 4 27.28 506200404 11 21 57 6 0,05 4 28.17 506210404 11 3.8 17.0 21 57 6 0,05 4 25.28 505910405 9 18 54 6 0,05 4 27.28 506200505 13 21 57 6 0,05 4 28.17 506210505 13 4.8 19.0 21 57 6 0,05 4 25.28 505910506 10 18 54 6 0,05 4 26.23 506200606 13 21 57 6 0,05 4 27.65 506210606 13 5.8 19.0 21 57 6 0,05 4 25.28 505910608 12 22 58 8 0,05 4 39.52 506200808 19 27 63 8 0,05 4 43.30 506210808 19 7.8 27.0 30 63 8 0,05 4 36.90 50591080
10 14 26 66 10 0,08 4 53.43 5062010010 22 32 72 10 0,08 4 59.95 5062110010 22 9.8 28.0 32 72 10 0,08 4 51.50 5059110012 16 28 73 12 0,08 4 66.44 5062012012 26 38 83 12 0,08 4 74.40 5062112012 26 11.8 37.0 38 83 12 0,08 4 65.07 5059112014 18 30 75 14 0,08 4 98.34 5062014014 26 38 83 14 0,08 4 109.39 5062114014 26 13.8 32.0 38 83 14 0,08 4 95.75 5059114016 22 34 82 16 0,08 4 126.60 5062016016 32 44 92 16 0,08 4 143.32 5062116016 32 15.8 43.0 44 92 16 0,08 4 117.82 5059116018 24 36 84 18 0,08 4 160.76 5062018018 32 44 92 18 0,08 4 175.47 5062118018 32 17.8 43.0 44 92 18 0,08 4 146.99 5059118020 26 42 92 20 0,08 4 202.04 5062020020 38 54 104 20 0,08 4 226.12 5062120020 38 19.8 49.0 54 104 20 0,08 4 191.13 5059120025 38 24.5 48.0 49 104 25 0,08 4 308.70 5059125025 38 48 104 25 0,08 4 377.98 50621250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 173
13
Solid carbide end milling cutter, DIN 6527 / factory standard - With graduated flute depth
l2
Ød2
Ød1
l1
l3l5
K
l7
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 f8 l2 l3 l7 l5 l1 d2 h5 K
Z 50 907 ... 50 907 ... 50 907 ...mm mm mm mm mm mm mm mm £ £ £
4 8 15 4.4 18 54 6 0,15 4 49.12 509070404 11 18 4.4 21 57 6 0,15 4 49.12 509070414 16 19 6.4 26 62 6 0,15 4 54.33 509070425 9 16 4.8 18 54 6 0,15 4 49.12 509070505 13 19 4.8 21 57 6 0,15 4 49.12 509070515 17 20 6.8 26 62 6 0,15 4 54.33 509070526 10 17 5.2 18 54 6 0,15 4 51.86 509070606 13 19 5.2 21 57 6 0,15 4 52.57 509070616 18 21 7.2 26 62 6 0,15 4 56.92 509070628 12 20 7.6 22 58 8 0,15 4 58.98 509070808 19 25 7.6 27 63 8 0,15 4 60.16 509070818 24 27 9.6 32 68 8 0,15 4 65.38 50907082
10 14 24 8.8 26 66 10 0,15 4 93.02 5090710010 22 30 8.8 32 72 10 0,15 4 102.98 5090710110 30 33 12.0 40 80 10 0,15 4 116.15 5090710212 16 26 10.4 28 73 12 0,15 4 123.39 5090712012 26 36 10.4 38 83 12 0,15 4 139.87 5090712112 36 39 14.4 48 93 12 0,15 4 158.73 5090712214 18 28 10.4 30 75 14 0,15 4 148.54 5090714014 26 36 10.4 38 83 14 0,15 4 182.46 5090714114 42 45 16.8 54 99 14 0,15 4 219.00 5090714216 22 32 12.8 34 82 16 0,15 4 182.46 5090716016 32 42 12.8 44 92 16 0,15 4 247.13 5090716116 48 51 19.2 60 108 16 0,15 4 299.92 5090716218 24 34 12.8 36 84 18 0,15 4 229.44 5090718018 32 42 12.8 44 92 18 0,15 4 274.89 5090718118 54 57 21.6 66 114 18 0,15 4 347.02 5090718220 26 42 15.2 42 92 20 0,15 4 313.09 5090720020 38 52 15.2 54 104 20 0,15 4 355.67 5090720120 60 63 24.0 76 126 20 0,15 4 445.36 50907202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○
Solid Carbide milling cutters
13 / 174 toolingcenter.com
Solid carbide end milling cutter with corner radius, ≈ DIN 6527 / factory standard - With graduated flute depth
l2
Ød2
Ød1
l1
l3l5
r
l7
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 f8 r ±0,01 l2 l3 l7 l5 l1 d2 h5 Z 50 908 ... 50 908 ... 50 908 ...
mm mm mm mm mm mm mm mm £ £ £4 0.5 8 15 4.4 18 54 6 4 53.43 509080404 0.5 11 18 4.4 21 57 6 4 54.94 509080414 0.5 16 19 6.4 26 62 6 4 64.07 509080425 0.5 9 16 4.8 18 54 6 4 53.43 509080505 0.5 13 19 4.8 21 57 6 4 54.94 509080515 0.5 17 20 6.8 26 62 6 4 64.07 509080526 0.5 10 17 5.2 18 54 6 4 55.89 509080606 0.5 13 19 5.2 21 57 6 4 65.38 509080616 0.5 18 21 7.2 26 62 6 4 67.75 509080628 1.0 12 20 7.6 22 58 8 4 62.88 509080808 1.0 19 25 7.6 27 63 8 4 71.66 509080818 1.0 24 27 9.6 32 68 8 4 73.45 50908082
10 1.0 14 24 8.8 26 66 10 4 104.53 5090810010 1.0 22 30 8.8 32 72 10 4 111.15 5090810110 1.0 30 33 12.0 40 80 10 4 123.15 5090810212 1.5 16 26 10.4 28 73 12 4 140.71 5090812012 1.5 26 36 10.4 38 83 12 4 150.08 5090812112 1.5 36 39 14.4 48 93 12 4 160.40 5090812214 1.5 18 28 10.4 30 75 14 4 192.67 5090814014 1.5 26 36 10.4 38 83 14 4 202.88 5090814114 1.5 42 45 16.8 54 99 14 4 235.27 5090814216 2.0 22 32 12.8 34 82 16 4 267.53 5090816016 2.0 32 42 12.8 44 92 16 4 274.89 5090816116 2.0 48 51 19.2 60 108 16 4 296.95 5090816218 2.0 24 34 12.8 36 84 18 4 276.32 5090818018 2.0 32 42 12.8 44 92 18 4 285.09 5090818118 2.0 54 57 21.6 66 114 18 4 345.36 5090818220 2.0 26 40 15.2 42 92 20 4 394.00 5090820020 2.0 38 52 15.2 54 104 20 4 402.77 5090820120 2.0 60 63 24.0 76 126 20 4 470.28 50908202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○
Solid Carbide milling cutters
toolingcenter.com 13 / 175
13
Solid carbide end milling cutter, factory standard
l2
Ød2
Ød1
l1Ød3
l3
blank Ti 1005
PG V0 PG V0Article no. Article no.
d1 h6 l2 d3 l3 l1 d2 h5 Z 54 650 ... 54 652 ...
mm mm mm mm mm mm £ £6 19 5.8 30 70 6 5 54.70 54650062 65.38 546520628 25 7.7 40 80 8 5 70.36 54650082 79.38 5465208210 31 9.7 50 94 10 5 108.91 54650102 120.78 5465210212 37 11.6 60 109 12 5 175.72 54650122 186.86 5465212214 43 13.6 70 119 14 5 284.01 54650142 296.48 5465214216 49 15.5 80 132 16 7 315.22 54650162 328.86 5465216218 56 17.5 90 142 18 7 393.64 54650182 408.59 5465218220 62 19.5 100 154 20 7 436.00 54650202 453.43 54652202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid carbide multi-flute milling cutter, factory standard
l2
Ød2
Ød1
l1
K
Ti 400
PG V0Article no.
d1 h10 l2 l1 d2 h5 K
Z 50 631 ...mm mm mm mm mm £
4 14 40 4 0,05 5 29.33 506310405 18 50 5 0,05 5 32.48 506310506 18 50 6 0,05 7 36.78 506310608 25 63 8 0,05 7 53.40 5063108010 30 72 10 0,08 9 76.06 5063110012 32 83 12 0,08 9 98.47 5063112014 32 83 14 0,08 9 144.26 5063114016 36 92 16 0,08 11 209.51 5063116018 40 92 18 0,08 11 238.11 5063118020 45 104 20 0,08 13 279.04 5063120025 45 120 25 0,08 13 505.04 50631250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ○ ●
Solid Carbide milling cutters
13 / 176 toolingcenter.com
Solid Carbide High Accuracy Finish Milling Cutter, DIN 6527 / Factory Standard - max. taper of 0.003 mm for high precision and parallelism of vertical walls - Tool with cutting edge correction
l2
Ød2
Ød1
l1
l3
Ød3
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 e8 l2 d3 l3 l1 d2 h5 Z 50 959 ... 50 959 ...
mm mm mm mm mm mm £ £6 13 5.6 19 57 6 6 44.47 509590606 10 5.8 18 58 6 6 48.65 509590636 13 5.8 27 67 6 6 66.08 509590646 13 5.8 36 76 6 6 82.58 509590656 15 5.6 42 80 6 6 61.46 509590618 19 7.6 25 63 8 6 51.10 509590808 13 7.7 24 64 8 6 54.59 509590838 17 7.7 36 76 8 6 81.75 509590848 17 7.7 48 89 8 6 102.16 509590858 20 7.6 62 100 8 6 75.93 5095908110 22 9.6 30 72 10 6 87.52 5095910010 16 9.7 30 74 10 6 96.10 5095910310 21 9.7 45 89 10 6 122.44 5095910410 25 9.6 58 100 10 6 113.78 5095910110 21 9.7 60 104 10 6 153.04 5095910512 26 11.5 36 83 12 6 120.90 5095912012 19 11.6 36 85 12 6 130.03 5095912312 25 11.6 54 103 12 6 189.47 5095912412 30 11.5 73 120 12 6 176.42 5095912112 25 11.6 72 121 12 6 236.81 5095912516 32 15.0 42 92 16 6 225.42 5095916016 25 15.5 48 100 16 6 242.14 5095916316 33 15.5 72 124 16 6 333.49 5095916416 33 15.5 96 148 16 6 416.89 5095916516 40 15.0 100 150 16 6 309.89 5095916120 38 19.0 52 104 20 6 324.72 5095920020 32 19.5 60 114 20 6 348.79 5095920320 42 19.5 90 144 20 6 459.25 5095920420 50 19.0 98 150 20 6 427.45 5095920120 42 19.5 120 174 20 6 574.08 5095920525 40 24.5 75 136 25 6 436.95 5095925325 52 24.5 113 174 25 6 574.56 5095925425 52 24.5 150 210 25 6 718.22 50959255
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 302● ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 177
13
Solid carbide finish milling cutter, Factory Standard
l2
Ød2
Ød1
l1
l5
K
blank blank
PG V0 PG V0Article no. Article no.
d1 f8 l2 l5 l1 d2 h5 K
Z 50 632 ... 50 632 ...mm mm mm mm mm mm £ £
4 11 21 57 6 0,15 6 25.50 506320404 16 26 62 6 0,15 6 38.80 506320415 13 21 57 6 0,15 6 25.50 506320505 18 26 62 6 0,15 6 38.80 506320516 13 21 57 6 0,15 6 25.50 506320606 18 26 62 6 0,15 6 38.80 506320617 16 27 63 8 0,15 6 31.68 506320707 21 32 68 8 0,15 6 48.17 506320718 19 27 63 8 0,15 6 30.14 506320808 24 32 68 8 0,15 6 42.95 506320819 19 32 72 10 0,15 6 51.86 506320909 27 40 80 10 0,15 6 80.68 50632091
10 22 32 72 10 0,15 6 49.93 5063210010 30 40 80 10 0,15 6 77.59 5063210112 26 38 83 12 0,15 6 68.10 5063212012 36 48 93 12 0,15 6 105.24 5063212114 26 38 83 14 0,15 6 86.26 5063214014 42 54 99 14 0,15 6 145.58 5063214116 32 44 92 16 0,15 6 121.49 5063216016 48 60 108 16 0,15 6 199.68 5063216116 65 77 125 16 0,15 6 246.53 5063216216 75 102 150 16 0,15 6 278.79 5063216316 95 102 150 16 0,15 6 318.90 5063216418 32 44 92 18 0,15 8 130.39 5063218018 54 66 114 18 0,15 8 229.92 5063218120 38 54 104 20 0,15 8 173.69 5063220020 60 76 126 20 0,15 8 296.83 5063220120 75 85 135 20 0,15 8 319.12 5063220220 95 100 150 20 0,15 8 331.71 5063220325 75 94 150 25 0,15 8 412.38 5063225025 95 104 160 25 0,15 8 618.14 5063225132 75 90 150 32 0,15 8 741.76 5063232032 95 100 160 32 0,15 8 843.73 50632321
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ●
Solid Carbide milling cutters
13 / 178 toolingcenter.com
Solid carbide finish milling cutter, Factory Standard
l2
Ød2
Ød1
l1
l5
K
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 l5 l1 d2 h5 K
Z 50 633 ... 50 633 ...mm mm mm mm mm mm £ £
4 11 21 57 6 0,15 6 33.58 506330404 16 26 62 6 0,15 6 46.44 506330415 13 21 57 6 0,15 6 33.58 506330505 18 26 62 6 0,15 6 46.44 506330516 13 21 57 6 0,15 6 33.58 506330606 18 26 62 6 0,15 6 46.44 506330617 16 27 63 8 0,15 6 40.16 506330707 21 32 68 8 0,15 6 62.06 506330718 19 27 63 8 0,15 6 39.15 506330808 24 32 68 8 0,15 6 54.70 506330819 19 32 72 10 0,15 6 64.54 506330909 27 40 80 10 0,15 6 98.47 50633091
10 22 32 72 10 0,15 6 62.88 5063310010 30 40 80 10 0,15 6 95.87 5063310112 26 38 83 12 0,15 6 81.71 5063312012 36 48 93 12 0,15 6 131.45 5063312114 26 38 83 14 0,15 6 113.06 5063314014 42 54 99 14 0,15 6 176.54 5063314116 32 44 92 16 0,15 6 149.38 5063316016 48 60 108 16 0,15 6 227.31 5063316116 65 77 125 16 0,15 6 285.44 5063316216 75 102 150 16 0,15 6 319.12 5063316316 95 102 150 16 0,15 6 369.08 5063316418 32 44 92 18 0,15 8 173.22 5063318018 54 66 114 18 0,15 8 278.33 5063318120 38 54 104 20 0,15 8 212.59 5063320020 60 76 126 20 0,15 8 354.37 5063320120 75 85 135 20 0,15 8 376.92 5063320220 95 100 150 20 0,15 8 389.96 5063320325 75 94 150 25 0,15 8 465.89 5063325025 95 104 160 25 0,15 8 680.07 5063325132 75 90 150 32 0,15 8 931.42 5063332032 95 100 160 32 0,15 8 908.65 50633321
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 179
13
Solid carbide finish milling cutter with corner radius, Factory Standard
l2
Ød2
Ød1
l1
l5
r
Ti 1000
PG V0Article no.
d1 f8 r ±0,01 l2 l5 l1 d2 h5 Z 50 634 ...
mm mm mm mm mm mm £6 0.5 18 26 62 6 6 45.09 506340606 1.0 18 26 62 6 6 45.09 506340618 0.5 24 32 68 8 6 44.85 506340808 1.0 24 32 68 8 6 44.85 506340818 2.0 24 32 68 8 6 44.85 5063408210 0.5 30 40 80 10 6 91.48 5063410010 1.0 30 40 80 10 6 91.48 5063410110 2.0 30 40 80 10 6 91.48 5063410212 0.5 36 48 93 12 6 119.59 5063412012 1.0 36 48 93 12 6 119.59 5063412112 2.0 36 48 93 12 6 119.59 5063412212 3.0 36 48 93 12 6 119.59 5063412316 0.5 48 60 108 16 6 215.21 5063416016 1.0 48 60 108 16 6 215.21 5063416116 2.0 48 60 108 16 6 215.21 5063416216 3.0 48 60 108 16 6 215.21 5063416320 0.5 60 76 126 20 8 321.39 5063420020 1.0 60 76 126 20 8 321.39 5063420120 2.0 60 76 126 20 8 321.39 5063420220 3.0 60 76 126 20 8 321.39 50634203
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
13 / 180 toolingcenter.com
Solid carbide finish milling cutter, DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 l1 d2 h5 Z 50 635 ... 50 635 ...
mm mm mm mm £ £4 11 57 6 6 30.85 506350404 16 62 6 6 34.80 506350415 13 57 6 6 28.63 506350505 18 62 6 6 33.29 506350516 13 57 6 6 32.48 506350606 18 62 6 6 37.14 506350618 19 63 8 6 37.14 506350808 24 68 8 6 42.95 50635081
10 22 72 10 6 63.08 5063510010 30 80 10 6 74.04 5063510112 26 83 12 6 87.45 5063512012 36 93 12 6 102.03 5063512114 26 83 14 6 114.02 5063514014 42 99 14 6 139.76 5063514116 32 92 16 8 154.47 5063516016 48 108 16 8 191.00 5063516116 90 150 16 8 203.71 5063516218 32 92 18 8 171.91 5063518018 54 114 18 8 220.67 5063518120 38 104 20 8 221.98 5063520020 60 126 20 8 283.55 5063520120 75 135 20 8 252.70 5063520220 95 150 20 8 296.11 5063520325 75 150 25 8 702.33 5063525025 95 160 25 8 726.42 5063525132 75 150 32 8 841.97 5063532032 95 160 32 8 864.38 50635321
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
toolingcenter.com 13 / 181
13
Solid carbide finish milling cutter with corner radius, DIN 6527 / Factory Standard
l2
Ød2
Ød1
l1
rTi 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 l1 d2 h5 Z 50 636 ... 50 636 ...
mm mm mm mm mm £ £6 1.0 13 57 6 6 49.01 506360606 1.0 18 62 6 6 52.61 506360618 1.0 19 63 8 6 55.75 506360808 1.0 24 68 8 6 60.12 50636081
10 1.5 22 72 10 6 96.10 5063610010 1.5 30 80 10 6 113.42 5063610112 1.5 26 83 12 6 132.41 5063612012 1.5 36 93 12 6 147.95 5063612116 2.0 32 92 16 8 229.68 5063616016 2.0 48 108 16 8 276.79 5063616120 2.0 38 104 20 8 330.18 5063620020 2.0 60 126 20 8 412.03 50636201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
13 / 182 toolingcenter.com
Solid carbide rough milling cutter with corner radius, Factory Standard
Ød2
Ød1
l1
r
l2
l3
Ød3
l5
l5 with Shank DIN 6535 HB
Ti 1005 Ti 1005 blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h6 r +/-0,01 l2 d3 l3 l5 l1 d2 h5 Z 54 625 ... 54 627 ... 54 624 ... 54 626 ...
mm mm mm mm mm mm mm mm £ £ £ £3 4.5 2.8 15 22 58 6 3 43.91 54625030 43.91 54627030 29.80 54624030 29.80 546260303 8.0 2.8 15 22 58 6 3 48.30 54625031 48.30 54627031 33.35 54624031 33.35 546260314 5.5 3.8 20 26 62 6 3 43.91 54625040 43.91 54627040 29.80 54624040 29.80 546260404 10.5 3.8 20 26 62 6 3 48.30 54625041 48.30 54627041 33.35 54624041 33.35 546260415 7.0 4.8 25 34 70 6 3 47.22 54625050 47.22 54627050 32.48 54624050 32.48 546260505 13.0 4.8 25 34 70 6 3 51.86 54625051 51.86 54627051 35.63 54624051 35.63 546260516 1 8.5 5.8 30 34 70 6 3 47.93 54625061 47.93 54627061 34.89 54624061 34.89 546260616 1 16.0 5.8 30 34 70 6 3 51.80 54625062 51.80 54627062 38.44 54624062 38.44 546260627 1 11.0 6.7 40 44 80 8 3 63.24 54625071 63.24 54627071 48.41 54624071 48.41 546260717 1 21.0 6.7 40 44 80 8 3 69.53 54625072 69.53 54627072 52.26 54624072 52.26 546260728 1 11.0 7.7 40 44 80 8 3 63.24 54625081 63.24 54627081 48.41 54624081 48.41 546260818 1 21.0 7.7 40 44 80 8 3 69.53 54625082 69.53 54627082 52.26 54624082 52.26 546260829 1 14.0 8.7 50 54 94 10 3 87.52 54625091 87.52 54627091 71.23 54624091 71.23 546260919 1 26.0 8.7 50 54 94 10 3 98.24 54625092 98.24 54627092 78.22 54624092 78.22 5462609210 2 14.0 9.7 50 54 94 10 3 87.52 54625101 87.52 54627101 71.23 54624101 71.23 5462610110 2 26.0 9.7 50 54 94 10 3 98.24 54625102 98.24 54627102 78.22 54624102 78.22 5462610211 2 16.0 10.6 60 64 109 12 3 143.67 54625111 143.67 54627111 123.15 54624111 123.15 5462611111 2 31.0 10.6 60 64 109 12 3 158.03 54625112 158.03 54627112 132.06 54624112 132.06 5462611212 2 16.0 11.6 60 64 109 12 3 143.67 54625121 143.67 54627121 123.15 54624121 123.15 5462612112 2 31.0 11.6 60 64 109 12 3 158.03 54625122 158.03 54627122 132.06 54624122 132.06 5462612214 2 19.0 13.6 70 74 119 14 3 198.59 54625141 198.59 54627141 175.94 54624141 175.94 5462614114 2 36.0 13.6 70 74 119 14 3 213.08 54625142 213.08 54627142 193.62 54624142 193.62 5462614216 2 22.0 15.5 80 84 132 16 3 252.59 54625161 252.59 54627161 227.07 54624161 227.07 5462616116 2 41.0 15.5 80 84 132 16 3 278.08 54625162 278.08 54627162 249.73 54624162 249.73 5462616218 2 25.0 17.5 90 94 142 18 3 309.29 54625181 309.29 54627181 283.66 54624181 283.66 5462618118 2 47.0 17.5 90 94 142 18 3 355.67 54625182 355.67 54627182 326.25 54624182 326.25 5462618220 2 27.0 19.5 100 104 154 20 3 333.02 54625201 333.02 54627201 301.94 54624201 301.94 5462620120 2 52.0 19.5 100 104 154 20 3 382.96 54625202 382.96 54627202 347.25 54624202 347.25 54626202
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 183
13
Solid carbide rough milling cutter with corner radius, Factory Standard
Ød2
Ød1
l1
r
l2
l3
Ød3
l5
l5 with Shank DIN 6535 HB blank blank
PG V0 PG V0Article no. Article no.
d1 h6 r +/-0,01 l2 d3 l3 l5 l1 d2 h5 Z 54 660 ... 54 662 ...
mm mm mm mm mm mm mm mm £ £6 1 8.5 5.8 30 34 70 6 3 52.57 54660061 52.57 546620616 1 16.0 5.8 30 34 70 6 3 57.66 54660062 57.66 546620628 1 11.0 7.7 40 44 80 8 3 71.23 54660081 71.23 546620818 1 21.0 7.7 40 44 80 8 3 78.22 54660082 78.22 5466208210 2 14.0 9.7 50 54 94 10 3 108.80 54660101 108.80 5466210110 2 26.0 9.7 50 54 94 10 3 119.59 54660102 119.59 5466210212 2 16.0 11.6 60 64 109 12 3 184.84 54660121 184.84 5466212112 2 31.0 11.6 60 64 109 12 3 198.12 54660122 198.12 5466212216 2 22.0 15.5 80 84 132 16 3 340.49 54660161 340.49 5466216116 2 41.0 15.5 80 84 132 16 3 374.66 54660162 374.66 54662162
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 184 toolingcenter.com
Solid carbide rough milling cutter, DIN 6527
l2
Ød2
Ød1
l1
l5
K
Ti 400 Ti 400
PG V0 PG V0Article no. Article no.
d1 d11 l2 l5 l1 d2 h5 K
Z 50 618 ... 50 624 ...mm mm mm mm mm mm £ £
4 8 21 57 6 0,6 4 65.25 506240405 8 18 54 6 0,6 4 60.40 506180505 13 21 57 6 0,6 4 65.25 506240506 8 18 54 6 0,6 4 54.33 506180606 13 21 57 6 0,6 4 60.87 506240607 11 22 58 8 0,6 4 73.91 506180707 19 27 63 8 0,6 4 81.04 506240708 11 22 58 8 0,6 4 67.15 506180808 19 27 63 8 0,6 4 72.14 506240809 13 26 66 10 0,6 4 84.00 506180909 22 32 72 10 0,6 4 88.74 50624090
10 13 26 66 10 0,6 4 84.00 5061810010 22 32 72 10 0,6 4 83.76 5062410011 26 38 83 12 0,6 4 105.24 5062411012 16 28 73 12 0,6 4 90.20 5061812012 26 38 83 12 0,6 4 99.31 5062412013 26 38 83 14 0,6 4 147.11 5062413014 16 31 76 14 0,6 4 128.13 5061814014 26 38 83 14 0,6 4 138.69 5062414016 19 34 82 16 0,6 4 157.44 5061816016 32 44 92 16 0,6 4 157.91 5062416018 19 36 84 18 0,6 4 188.99 5061818018 32 44 92 18 0,6 4 209.87 5062418020 19 42 92 20 0,6 4 226.12 5061820020 38 54 104 20 0,6 4 235.38 5062420025 45 65 121 25 0,6 4 305.50 50624250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 185
13
Solid carbide rough milling cutter, DIN 6527
l2
Ød2
Ød1
l1
l5
K
Ti 400 Ti 400
PG V0 PG V0Article no. Article no.
d1 d11 l2 l5 l1 d2 h5 K
Z 50 619 ... 50 625 ...mm mm mm mm mm mm £ £
5 8 18 54 6 0,6 4 91.02 506190506 8 18 54 6 0,6 4 91.02 506190606 13 21 57 6 0,6 4 107.85 506250608 11 22 58 8 0,6 4 91.02 506190808 19 27 63 8 0,6 4 107.85 50625080
10 13 26 66 10 0,6 4 105.95 5061910010 22 32 72 10 0,6 4 123.04 5062510012 16 28 73 12 0,6 4 137.27 5061912012 26 38 83 12 0,6 4 141.18 5062512014 16 31 76 14 0,6 4 205.85 5061914014 26 38 83 14 0,6 4 226.01 5062514016 19 34 82 16 0,6 4 205.85 5061916016 32 44 92 16 0,6 4 226.01 5062516018 19 36 84 18 0,6 4 300.63 5061918018 32 44 92 18 0,6 4 368.56 5062518020 19 42 92 20 0,6 4 300.63 5061920020 38 54 104 20 0,6 4 335.98 50625200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid carbide milling cutter for roughing and finishing, DIN 6527
l2
Ød2
Ød1
l1
l5
KTi 400
PG V0Article no.
d1 d11 l2 l5 l1 d2 h5 K
Z 50 628 ...mm mm mm mm mm mm £
5 15 21 57 6 0,25 4 67.39 506280506 16 21 57 6 0,25 4 64.07 506280608 22 27 63 8 0,25 4 79.61 5062808010 25 32 72 10 0,25 4 85.79 5062810012 28 38 83 12 0,25 4 104.17 5062812016 35 44 92 16 0,25 4 165.38 5062816020 40 54 104 20 0,25 4 248.66 50628200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid Carbide milling cutters
13 / 186 toolingcenter.com
Solid carbide milling cutter for roughing and finishing, DIN 6527
l2
Ød2
Ød1
l1
l5
KTi 400
PG V0Article no.
d1 d11 l2 l5 l1 d2 h5 K
Z 50 629 ...mm mm mm mm mm mm £
6 13 21 57 6 0,25 4 64.07 506290608 19 27 63 8 0,25 4 79.61 5062908010 22 32 72 10 0,25 4 85.79 5062910012 26 38 83 12 0,25 4 104.17 5062912016 32 44 92 16 0,25 4 165.38 5062916020 38 54 104 20 0,25 4 248.66 50629200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245 ● ○
Solid carbide rough milling cutter, DIN 6527
l2
Ød2
Ød1
l1
l5
KTi 400
PG V0Article no.
d1 d11 l2 l5 l1 d2 h5 K
Z 50 637 ...mm mm mm mm mm mm £
6 13 21 57 6 0,5 4 74.04 506370608 19 27 63 8 0,5 4 84.95 5063708010 22 32 72 10 0,5 4 91.02 5063710012 26 38 83 12 0,5 4 110.10 5063712014 26 38 83 14 0,5 4 154.36 5063714016 32 44 92 16 0,5 5 175.00 5063716018 32 44 92 18 0,5 5 233.84 5063718020 38 54 104 20 0,5 6 261.61 5063720025 45 65 121 25 0,5 6 320.44 50637250
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245○ ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 187
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,01 mm
l2
Ød2
Ød1
l1
l3
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 l3 l1 d2 h5 Z 50 647 ... 50 647 ...
mm mm mm mm mm £ £0.2 0.4 0.7 40 4 2 42.35 506479200.3 0.6 0.9 40 4 2 42.35 506479300.4 0.8 1.1 40 4 2 39.01 506479400.5 1.0 1.3 40 4 2 39.62 506479500.6 1.2 1.5 40 4 2 39.62 506479600.7 1.6 2.0 40 4 2 39.62 506479700.8 1.6 2.0 40 4 2 48.03 506479810.8 3.0 3.8 40 4 2 39.62 506479801.0 3.0 3.8 40 4 2 37.49 506470101.2 3.0 3.8 40 4 2 35.72 506470121.4 3.0 3.8 40 4 2 35.72 506470141.5 3.0 3.8 40 4 2 37.49 506470151.6 4.0 5.0 40 4 2 34.45 506470161.8 5.0 6.3 40 4 2 35.72 506470182.0 3.0 3.8 50 6 2 37.49 506470202.0 5.0 6.3 60 6 2 37.49 506470213.0 4.0 5.0 50 6 2 37.49 506470303.0 7.0 8.8 60 6 2 37.49 506470314.0 8.0 10.0 54 6 2 37.49 506470404.0 10.0 12.5 75 6 2 43.32 506470415.0 9.0 11.3 54 6 2 37.49 506470505.0 12.0 15.0 75 6 2 52.26 506470516.0 10.0 10.5 54 6 2 37.49 506470606.0 12.0 12.5 100 6 2 52.98 506470617.0 11.0 13.8 58 8 2 49.12 506470707.0 14.0 17.0 100 8 2 67.63 506470718.0 12.0 58 8 2 45.63 506470808.0 14.0 100 8 2 72.02 50647081
10.0 14.0 66 10 2 58.13 5064710010.0 18.0 100 10 2 97.99 5064710112.0 16.0 73 12 2 84.24 5064712012.0 22.0 100 12 2 126.35 5064712114.0 18.0 75 14 2 104.53 5064714014.0 26.0 120 14 2 201.34 5064714116.0 22.0 82 16 2 124.23 5064716016.0 30.0 150 16 2 271.20 5064716118.0 24.0 84 18 2 152.21 5064718018.0 34.0 150 18 2 330.75 5064718120.0 26.0 92 20 2 204.77 5064720020.0 38.0 150 20 2 359.23 50647201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 188 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød3
Ød2
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 Z 50 648 ... 50 648 ...
mm mm mm mm mm mm £ £0.2 0.2 0.18 0.6 55 6 2 68.33 506489210.2 0.2 0.18 1.0 55 6 2 68.94 506480220.2 0.2 0.18 1.6 55 6 2 69.65 506480230.2 0.2 0.18 2.0 55 6 2 70.47 506480240.3 0.3 0.28 0.9 55 6 2 68.33 506480310.3 0.3 0.28 1.5 55 6 2 68.94 506480320.3 0.3 0.28 2.4 55 6 2 69.65 506480330.3 0.3 0.28 3.0 55 6 2 70.47 506480340.4 0.4 0.37 1.2 55 6 2 68.33 506480410.4 0.4 0.37 2.0 55 6 2 68.94 506480420.4 0.4 0.37 3.2 55 6 2 69.65 506480430.4 0.4 0.37 4.0 55 6 2 70.47 506480440.5 0.5 0.45 1.5 55 6 2 66.57 506480510.5 0.5 0.45 2.5 55 6 2 67.28 506480520.5 0.5 0.45 4.0 55 6 2 68.33 506480530.5 0.5 0.45 5.0 55 6 2 68.94 506480540.6 0.6 0.58 2.0 55 6 2 56.10 506480610.6 0.6 0.58 3.0 55 6 2 50.62 506489600.6 0.6 0.58 5.0 55 6 2 60.87 506480630.6 0.6 0.58 6.0 55 6 2 58.43 506489610.8 0.8 0.77 2.5 55 6 2 55.89 506480810.8 0.8 0.77 4.0 55 6 2 50.62 506489800.8 0.8 0.77 6.5 65 6 2 62.17 506480830.8 0.8 0.77 8.0 65 6 2 58.43 506489811.0 1.0 0.95 3.0 55 6 2 55.89 506481011.0 1.0 0.95 5.0 55 6 2 50.62 506480101.0 1.0 0.95 8.0 65 6 2 59.09 506481031.0 1.0 0.95 10.0 65 6 2 62.17 506481041.0 1.0 0.95 12.0 65 6 2 58.43 506480111.2 1.2 1.15 3.0 55 6 2 55.89 506481211.2 1.2 1.15 6.0 55 6 2 50.62 506480121.2 1.2 1.15 10.0 65 6 2 62.17 506481231.2 1.2 1.15 12.0 65 6 2 58.43 506480131.3 1.3 1.25 4.0 55 6 2 55.89 506481311.3 1.3 1.25 7.0 55 6 2 56.10 506481321.3 1.3 1.25 11.0 65 6 2 62.17 506481331.3 1.3 1.25 13.0 65 6 2 66.08 506481341.5 1.5 1.44 5.0 55 6 2 56.10 506481511.5 1.5 1.44 7.5 55 6 2 50.62 506480151.5 1.5 1.44 12.0 65 6 2 66.08 506481531.5 1.5 1.44 15.0 65 6 2 58.43 506480161.6 1.6 1.52 5.0 55 6 2 56.10 506481611.6 1.6 1.52 8.0 55 6 2 56.10 506481621.6 1.6 1.52 13.0 65 6 2 62.17 506481631.6 1.6 1.52 16.0 65 6 2 66.08 506481641.8 1.8 1.72 5.5 55 6 2 55.89 506481811.8 1.8 1.72 9.0 55 6 2 56.10 506481821.8 1.8 1.72 14.5 65 6 2 62.17 506481831.8 1.8 1.72 18.0 65 6 2 66.08 50648184
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 189
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød3
Ød2
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 Z 50 648 ... 50 648 ...
mm mm mm mm mm mm £ £2.0 2.0 1.92 6.0 55 6 2 55.89 506482012.0 2.0 1.92 10.0 55 6 2 50.62 506480202.0 2.0 1.92 14.0 55 6 2 59.09 506482032.0 2.0 1.92 16.0 65 6 2 66.08 506482042.0 2.0 1.92 20.0 65 6 2 58.43 506480212.3 2.3 2.22 7.0 55 6 2 56.10 506482312.3 2.3 2.22 11.5 55 6 2 59.09 506482322.3 2.3 2.22 18.5 65 6 2 66.08 506482332.3 2.3 2.22 23.0 65 6 2 66.08 506482343.0 3.0 2.90 9.0 65 6 2 59.09 506483013.0 3.0 2.90 15.0 65 6 2 66.08 506483023.0 3.0 2.90 24.0 100 6 2 71.66 506483033.0 3.0 2.90 30.0 100 6 2 74.51 506483044.0 4.0 3.90 12.0 65 6 2 66.08 506484014.0 4.0 3.90 20.0 65 6 2 66.08 506484024.0 4.0 3.90 32.0 100 6 2 74.51 506484034.0 4.0 3.90 40.0 100 6 2 77.00 506484045.0 5.0 4.90 15.0 65 6 2 66.08 506485015.0 5.0 4.90 25.0 65 6 2 66.08 506485025.0 5.0 4.90 40.0 100 6 2 77.00 506485035.0 5.0 4.90 50.0 100 6 2 79.38 506485046.0 6.0 5.90 18.0 65 6 2 66.08 506486016.0 6.0 5.90 30.0 100 6 2 74.51 506486026.0 6.0 5.90 48.0 100 6 2 79.38 506486036.0 6.0 5.90 60.0 100 6 2 81.71 50648604
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 190 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød2
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1
Tol. l2 l3 l1 d2 h5 Z 50 905 ... 50 905 ... 50 905 ...
mm mm mm mm mm £ £ £0.20 0/-0,015 0.3 0.6 40 4 2 69.49 509050020.25 0/-0,015 0.3 0.6 40 4 2 69.49 509059250.30 0/-0,015 0.3 0.6 40 4 2 69.49 509050030.35 0/-0,015 0.4 0.7 40 4 2 69.49 509059350.40 0/-0,015 0.4 0.7 40 4 2 69.49 509050040.50 0/-0,015 0.5 0.8 40 4 2 69.49 509050050.50 0/-0,015 0.5 0.8 54 6 2 79.89 509059510.60 0/-0,015 0.6 0.9 40 4 2 69.49 509050060.70 0/-0,015 0.8 1.1 40 4 2 69.49 509050070.80 0/-0,015 0.8 1.1 40 4 2 69.49 509050080.90 0/-0,015 0.9 1.2 40 4 2 69.49 509050091.00 0/-0,015 1.0 1.3 54 4 2 69.49 509050101.00 0/-0,015 1.0 1.3 54 6 2 79.89 509050111.00 0/-0,015 1.0 1.3 64 6 2 83.62 509050121.00 0/-0,015 1.0 1.3 80 6 2 87.12 509050131.00 0/-0,015 1.0 1.3 100 6 2 90.73 509050141.20 0/-0,015 1.2 1.5 54 4 2 69.49 509051121.40 0/-0,015 1.4 1.8 54 4 2 69.49 509051141.50 0/-0,015 1.5 1.9 54 4 2 69.49 509051151.50 0/-0,015 1.5 1.9 54 6 2 82.38 509052151.50 0/-0,015 1.5 1.9 80 6 2 87.12 509053151.60 0/-0,015 1.8 2.3 54 4 2 69.49 509051161.80 0/-0,015 1.8 2.3 54 4 2 69.49 509051182.00 0/-0,015 2.0 2.5 54 4 2 74.13 509052062.00 0/-0,015 4.0 5.0 54 4 2 79.89 509052022.00 0/-0,015 4.0 5.0 64 6 2 89.16 509052072.00 0/-0,015 4.0 5.0 82 6 2 87.12 509052042.00 0/-0,015 4.0 5.0 100 6 2 90.73 509052052.50 0/-0,02 5.0 6.6 54 4 2 69.49 509052512.50 0/-0,02 5.0 6.3 54 6 2 79.89 509052522.50 0/-0,02 5.0 6.3 64 6 2 86.21 509052532.50 0/-0,02 5.0 6.3 82 6 2 87.12 509052542.50 0/-0,02 5.0 6.3 100 6 2 90.73 509052553.00 0/-0,02 5.0 6.3 54 4 2 69.49 509050303.00 0/-0,02 5.0 6.3 82 4 2 69.49 509050323.00 0/-0,02 5.0 6.3 100 4 2 69.49 509050333.00 0/-0,02 5.0 6.3 54 6 2 79.89 509050353.00 0/-0,02 5.0 6.3 64 6 2 83.62 509050363.00 0/-0,02 5.0 6.3 82 6 2 87.12 509050373.00 0/-0,02 8.0 10.0 100 6 2 90.73 509050384.00 0/-0,02 8.0 54 4 2 69.49 509050404.00 0/-0,02 8.0 82 4 2 82.38 509050424.00 0/-0,02 8.0 100 4 2 87.68 509050434.00 0/-0,02 8.0 10.0 54 6 2 69.49 509050454.00 0/-0,02 8.0 10.0 64 6 2 83.62 509050464.00 0/-0,02 8.0 10.0 82 6 2 87.12 509050474.00 0/-0,02 8.0 10.0 100 6 2 90.73 509050485.00 0/-0,02 9.0 54 5 2 69.49 509050505.00 0/-0,02 9.0 64 5 2 83.62 50905051
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 191
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød2
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1
Tol. l2 l3 l1 d2 h5 Z 50 905 ... 50 905 ... 50 905 ...
mm mm mm mm mm £ £ £5.00 0/-0,02 9.0 82 5 2 87.12 509050525.00 0/-0,02 9.0 100 5 2 90.73 509050535.00 0/-0,02 9.0 11.3 54 6 2 69.49 509050555.00 0/-0,02 9.0 11.3 64 6 2 83.62 509050565.00 0/-0,02 9.0 11.3 82 6 2 87.12 509050575.00 0/-0,02 9.0 11.3 100 6 2 90.73 509050586.00 0/-0,02 10.0 54 6 2 69.49 509050606.00 0/-0,02 10.0 64 6 2 83.62 509050616.00 0/-0,02 10.0 82 6 2 87.12 509050626.00 0/-0,02 10.0 100 6 2 90.73 509050636.00 0/-0,02 10.0 120 6 2 94.69 509050648.00 0/-0,025 12.0 64 8 2 75.93 509050818.00 0/-0,025 12.0 82 8 2 97.07 509050828.00 0/-0,025 12.0 100 8 2 117.96 509050838.00 0/-0,025 12.0 120 8 2 138.75 5090508410.00 0/-0,025 14.0 67 10 2 94.80 5090510110.00 0/-0,025 14.0 82 10 2 127.68 5090510210.00 0/-0,025 14.0 100 10 2 161.12 5090510310.00 0/-0,025 14.0 127 10 2 193.21 5090510412.00 0/-0,025 16.0 75 12 2 137.96 5090512112.00 0/-0,025 16.0 100 12 2 207.34 5090512212.00 0/-0,025 16.0 150 12 2 274.33 5090512314.00 0/-0,025 18.0 80 14 2 172.20 5090514114.00 0/-0,025 18.0 100 14 2 250.60 5090514214.00 0/-0,025 18.0 150 14 2 330.50 5090514316.00 0/-0,025 22.0 85 16 2 204.51 5090516116.00 0/-0,025 22.0 150 16 2 445.17 5090516320.00 0/-0,025 26.0 90 20 2 335.91 5090520120.00 0/-0,025 26.0 150 20 2 589.23 50905203
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 192 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød2
Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1
Tol. l2 l3 l1 d2 h5 Z 50 906 ... 50 906 ... 50 906 ... 50 906 ...
mm mm mm mm mm £ £ £ £0.20 0/-0,015 0.3 0.6 40 4 2 69.49 509060020.25 0/-0,015 0.3 0.6 40 4 2 69.49 509069250.30 0/-0,015 0.3 0.6 40 4 2 69.49 509060030.35 0/-0,015 0.4 0.7 40 4 2 69.49 509069350.40 0/-0,015 0.4 0.7 40 4 2 69.49 509060040.50 0/-0,015 0.5 0.8 40 4 2 69.49 509060050.50 0/-0,015 0.5 0.8 54 6 2 79.89 509069510.60 0/-0,015 0.6 0.9 40 4 2 69.49 509060060.70 0/-0,015 0.8 1.1 40 4 2 69.49 509060070.80 0/-0,015 0.8 1.1 40 4 2 69.49 509060080.90 0/-0,015 0.9 1.2 40 4 2 69.49 509060091.00 0/-0,015 1.0 1.3 54 4 2 69.49 509060101.00 0/-0,015 1.0 1.3 54 6 2 79.89 509060111.00 0/-0,015 1.0 1.3 64 6 2 83.62 509060121.00 0/-0,015 1.0 1.3 80 6 2 87.12 509060131.00 0/-0,015 1.0 1.3 100 6 2 90.73 509060141.20 0/-0,015 1.2 1.5 54 4 2 69.49 509061121.40 0/-0,015 1.4 1.8 54 4 2 69.49 509061141.50 0/-0,015 1.5 1.9 54 4 2 69.49 509061151.50 0/-0,015 1.5 1.9 54 6 2 79.89 509062151.50 0/-0,015 1.5 1.9 80 6 2 87.12 509063151.60 0/-0,015 1.8 2.3 54 4 2 69.49 509061161.80 0/-0,015 1.8 2.3 54 4 2 69.49 509061182.00 0/-0,015 2.0 2.5 54 4 2 74.13 509062062.00 0/-0,015 4.0 5.0 54 6 2 79.89 509062022.00 0/-0,015 4.0 5.0 64 6 2 89.16 509062072.00 0/-0,015 4.0 5.0 82 6 2 87.12 509062042.00 0/-0,015 4.0 5.0 100 6 2 90.73 509062052.50 0/-0,02 5.0 6.6 54 4 2 69.49 509062512.50 0/-0,02 5.0 6.3 54 6 2 79.89 509062522.50 0/-0,02 5.0 6.3 64 6 2 83.62 509062532.50 0/-0,02 5.0 6.3 82 6 2 87.12 509062542.50 0/-0,02 5.0 6.3 100 6 2 90.73 509062553.00 0/-0,02 5.0 6.3 54 4 2 69.49 509060303.00 0/-0,02 5.0 6.3 82 4 2 69.49 509060323.00 0/-0,02 5.0 6.3 100 4 2 69.49 509060333.00 0/-0,02 5.0 6.3 54 6 2 79.89 509060353.00 0/-0,02 5.0 6.3 64 6 2 83.62 509060363.00 0/-0,02 5.0 6.3 82 6 2 87.12 509060373.00 0/-0,02 8.0 10.0 100 6 2 90.73 509060384.00 0/-0,02 8.0 54 4 2 69.49 509060404.00 0/-0,02 8.0 82 4 2 82.38 509060424.00 0/-0,02 8.0 100 4 2 87.68 509060434.00 0/-0,02 8.0 10.0 54 6 2 69.49 509060454.00 0/-0,02 8.0 10.0 64 6 2 83.62 509060464.00 0/-0,02 8.0 10.0 82 6 2 87.12 509060474.00 0/-0,02 8.0 10.0 100 6 2 90.73 509060485.00 0/-0,02 9.0 54 5 2 69.49 50906050
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 193
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød2
Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1
Tol. l2 l3 l1 d2 h5 Z 50 906 ... 50 906 ... 50 906 ... 50 906 ...
mm mm mm mm mm £ £ £ £5.00 0/-0,02 9.0 64 5 2 83.62 509060515.00 0/-0,02 9.0 82 5 2 87.12 509060525.00 0/-0,02 9.0 100 5 2 90.73 509060535.00 0/-0,02 9.0 11.3 54 6 2 69.49 509060555.00 0/-0,02 9.0 11.3 64 6 2 83.62 509060565.00 0/-0,02 9.0 11.3 82 6 2 87.12 509060575.00 0/-0,02 9.0 11.3 100 6 2 90.73 509060586.00 0/-0,02 10.0 54 6 2 69.49 509060606.00 0/-0,02 10.0 64 6 2 83.62 509060616.00 0/-0,02 10.0 82 6 2 87.12 509060626.00 0/-0,02 10.0 100 6 2 90.73 509060636.00 0/-0,02 10.0 120 6 2 94.69 509060648.00 0/-0,025 12.0 64 8 2 75.93 509060818.00 0/-0,025 12.0 82 8 2 97.07 509060828.00 0/-0,025 12.0 100 8 2 117.96 509060838.00 0/-0,025 12.0 120 8 2 138.75 50906084
10.00 0/-0,025 14.0 67 10 2 94.80 5090610110.00 0/-0,025 14.0 82 10 2 127.68 5090610210.00 0/-0,025 14.0 100 10 2 161.12 5090610310.00 0/-0,025 14.0 127 10 2 193.21 5090610412.00 0/-0,025 16.0 75 12 2 137.96 5090612112.00 0/-0,025 16.0 100 12 2 207.34 5090612212.00 0/-0,025 16.0 150 12 2 274.33 5090612314.00 0/-0,025 18.0 80 14 2 172.20 5090614114.00 0/-0,025 18.0 100 14 2 250.60 5090614214.00 0/-0,025 18.0 150 14 2 330.50 5090614316.00 0/-0,025 22.0 85 16 2 204.51 5090616116.00 0/-0,025 22.0 150 16 2 445.17 5090616320.00 0/-0,025 26.0 90 20 2 335.91 5090620120.00 0/-0,025 26.0 150 20 2 589.23 50906203
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
13 / 194 toolingcenter.com
Solid Carbide Micro Radius Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød3
Ød2
DIAMOND DIAMOND
PG V0 PG V0Article no. Article no.
d1 f8 l2 l3 d3 l1 d2 h5 Z 50 912 ... 50 912 ...
mm mm mm mm mm mm £ £0.6 1.2 3.0 0.58 55 6 2 122.44 509129060.6 1.2 6.0 0.58 65 6 2 134.06 509120060.8 1.2 4.0 0.77 55 6 2 122.44 509129080.8 1.2 8.0 0.77 65 6 2 134.06 509120081.0 1.5 5.0 0.95 55 6 2 122.44 509129101.0 1.5 12.0 0.95 65 6 2 134.06 509120101.2 1.6 6.0 1.15 55 6 2 122.44 509129121.2 1.6 12.0 1.15 65 6 2 134.06 509120121.5 1.8 7.5 1.44 55 6 2 122.44 509129151.5 1.8 15.0 1.44 65 6 2 134.06 509120152.0 2.0 10.0 1.92 55 6 2 122.44 509129202.0 2.0 20.0 1.92 65 6 2 134.06 50912020
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 195
13
Solid Carbide Ball Nosed Cutter, ≈ DIN 6527 - Radius accuracy: ± 0,01 mm
l2
Ød2
Ød1
l1
l5
blank
PG V0Article no.
d1 f8 l2 l5 l1 d2 h5 Z 50 638 ...
mm mm mm mm mm £3 5 14 50 6 2 23.73 506380304 8 18 54 6 2 22.70 506380405 9 18 54 6 2 23.73 506380506 10 18 54 6 2 22.70 506380607 11 22 58 8 2 29.80 506380708 12 22 58 8 2 27.65 506380809 13 26 66 10 2 37.62 5063809010 14 26 66 10 2 34.45 5063810012 16 28 73 12 2 51.10 5063812014 18 30 75 14 2 65.77 5063814016 22 34 82 16 2 79.38 5063816018 24 36 84 18 2 98.83 5063818020 26 42 92 20 2 131.10 50638200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
13 / 196 toolingcenter.com
Solid Carbide Ball Nosed Cutter, ≈ DIN 6527 - Radius accuracy: ± 0,01 mm
l2
Ød2
Ød1
l1
l5
Ti 1000
PG V0Article no.
d1 f8 l2 l5 l1 d2 h5 Z 50 639 ...
mm mm mm mm mm £3 5 14 50 6 2 32.48 506390304 8 18 54 6 2 34.05 506390405 9 18 54 6 2 34.05 506390506 10 18 54 6 2 35.36 506390607 11 22 58 8 2 48.41 506390708 12 22 58 8 2 44.02 506390809 13 26 66 10 2 58.43 5063909010 14 26 66 10 2 59.45 5063910012 16 28 73 12 2 78.57 5063912014 18 30 75 14 2 103.00 5063914016 22 34 82 16 2 123.39 5063916018 24 36 84 18 2 155.89 5063918020 26 42 92 20 2 202.16 50639200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 197
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød3
Ød2
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 Z 50 903 ... 50 903 ...
mm mm mm mm mm mm £ £0.2 0.2 0.18 0.6 55 3 2 67.99 509030210.2 0.2 0.18 1.0 55 3 2 68.94 509030220.2 0.2 0.18 1.6 55 3 2 69.65 509030230.2 0.2 0.18 2.0 55 3 2 70.47 509030240.3 0.3 0.28 0.9 55 3 2 67.99 509030310.3 0.3 0.28 1.5 55 3 2 68.94 509030320.3 0.3 0.28 2.4 55 3 2 69.65 509030330.3 0.3 0.28 3.0 55 3 2 70.47 509030340.4 0.4 0.37 1.2 55 3 2 67.99 509030410.4 0.4 0.37 2.0 55 3 2 68.94 509030420.4 0.4 0.37 3.2 55 3 2 69.65 509030430.4 0.4 0.37 4.0 55 3 2 70.47 509030440.5 0.5 0.45 1.5 55 3 2 66.57 509030510.5 0.5 0.45 2.5 55 3 2 67.28 509030520.5 0.5 0.45 4.0 55 3 2 67.99 509030530.5 0.5 0.45 5.0 55 3 2 68.94 509030540.6 0.6 0.58 2.0 55 3 2 56.10 509030610.6 0.6 0.58 3.0 55 3 2 55.89 509030620.6 0.6 0.58 5.0 65 3 2 60.87 509030630.6 0.6 0.58 6.0 65 3 2 64.43 509030640.8 0.8 0.77 2.5 55 3 2 55.89 509030810.8 0.8 0.77 4.0 55 3 2 55.89 509030820.8 0.8 0.77 6.5 65 3 2 62.17 509030830.8 0.8 0.77 8.0 65 3 2 64.43 509030841.0 1.0 0.95 3.0 55 3 2 55.89 509031011.0 1.0 0.95 5.0 55 3 2 55.89 509031021.0 1.0 0.95 8.0 65 3 2 59.09 509031031.0 1.0 0.95 10.0 65 3 2 64.43 509031041.0 1.0 0.95 12.0 65 3 2 66.08 509031051.2 1.2 1.15 3.0 55 3 2 55.89 509031211.2 1.2 1.15 6.0 55 3 2 55.89 509031221.2 1.2 1.15 10.0 65 3 2 62.17 509031231.2 1.2 1.15 12.0 65 3 2 64.43 509031241.3 1.3 1.25 4.0 55 3 2 55.89 509031311.3 1.3 1.25 7.0 55 3 2 55.89 509031321.3 1.3 1.25 11.0 65 3 2 62.17 509031331.3 1.3 1.25 13.0 65 3 2 64.43 509031341.5 1.5 1.44 5.0 55 3 2 56.10 509031511.5 1.5 1.44 7.5 55 3 2 55.89 509031521.5 1.5 1.44 12.0 65 3 2 64.43 509031541.5 1.5 1.44 15.0 65 3 2 66.08 509031531.6 1.6 1.52 5.0 55 3 2 56.10 509031611.6 1.6 1.52 8.0 55 3 2 56.10 509031621.6 1.6 1.52 13.0 65 3 2 62.17 509031631.6 1.6 1.52 16.0 65 3 2 66.08 509031641.8 1.8 1.72 5.5 55 3 2 55.89 509031811.8 1.8 1.72 9.0 55 3 2 56.10 509031821.8 1.8 1.72 14.5 65 3 2 62.17 509031831.8 1.8 1.72 18.0 65 3 2 66.08 50903184
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
continued on next page
13 / 198 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Transition angle α = 15° - Radius accuracy: ± 0.01 mm
l2Ød1
l1
l3
Ød3
Ød2
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 Z 50 903 ... 50 903 ...
mm mm mm mm mm mm £ £2.0 2.0 1.92 6.0 55 3 2 55.89 509032012.0 2.0 1.92 10.0 55 3 2 55.89 509032022.0 2.0 1.92 14.0 55 3 2 59.09 509032032.0 2.0 1.92 16.0 65 3 2 66.08 509032042.0 2.0 1.92 20.0 65 3 2 64.43 509032052.3 2.3 2.22 7.0 55 3 2 55.89 509032312.3 2.3 2.22 11.5 55 3 2 55.89 509032322.3 2.3 2.22 18.5 65 3 2 59.09 509032332.3 2.3 2.22 20.0 65 3 2 64.43 509032342.3 2.3 2.22 23.0 65 3 2 66.08 509032353.0 3.0 2.90 9.0 65 6 2 59.09 509033013.0 3.0 2.90 15.0 65 6 2 66.08 509033023.0 3.0 2.90 24.0 100 6 2 71.66 509033033.0 3.0 2.90 30.0 100 6 2 74.51 509033044.0 4.0 3.90 12.0 65 6 2 66.08 509034014.0 4.0 3.90 20.0 65 6 2 66.08 509034024.0 4.0 3.90 32.0 100 6 2 74.51 509034034.0 4.0 3.90 40.0 100 6 2 77.00 509034045.0 5.0 4.90 15.0 65 6 2 66.08 509035015.0 5.0 4.90 25.0 65 6 2 66.08 509035025.0 5.0 4.90 40.0 100 6 2 77.00 509035035.0 5.0 4.90 50.0 100 6 2 79.38 509035046.0 6.0 5.90 18.0 65 6 2 66.08 509036016.0 6.0 5.90 30.0 100 6 2 74.51 509036026.0 6.0 5.90 48.0 100 6 2 79.38 509036036.0 6.0 5.90 60.0 100 6 2 81.71 50903604
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 199
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,01 mm
l2
Ød2
Ød1
l1
l3
Ød3
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 Z 50 904 ... 50 904 ...
mm mm mm mm mm mm £ £3 6 2.7 16 50 3 2 43.56 509040303 10 2.7 32 75 3 2 61.91 509040314 7 3.7 17 54 4 2 51.73 509040404 13 3.7 36 75 4 2 72.84 509040415 8 4.6 18 54 5 2 57.78 509040505 15 4.6 40 75 5 2 83.76 509040516 10 5.5 21 54 6 2 56.47 509040606 16 5.5 44 100 6 2 75.07 509040618 12 7.5 27 59 8 2 71.90 509040808 22 7.5 54 100 8 2 106.07 50904081
10 13 9.4 32 67 10 2 94.20 5090410010 25 9.4 60 100 10 2 141.31 5090410112 16 11.4 38 73 12 2 126.23 5090412012 26 11.4 60 100 12 2 183.77 5090412114 16 13.2 38 75 14 2 157.44 5090414014 26 13.2 60 100 14 2 207.27 5090414116 20 15.0 44 83 16 2 204.53 5090416016 30 15.0 92 150 16 2 293.87 5090416120 25 19.0 50 93 20 2 283.66 5090420020 40 19.0 92 150 20 2 410.01 50904201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
13 / 200 toolingcenter.com
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,01 mm
l2Ød1
l1
l3
Ød2
Ød3
blank blank blank
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 h6 l2 d3 l3 l1 d2 h5 Z 54 640 ... 54 640 ... 54 640 ...
mm mm mm mm mm mm £ £ £3 5.0 2.8 12 55 6 2 51.15 546400313 3.5 2.8 15 58 6 2 55.76 546400343 8.0 2.8 15 58 6 2 58.49 546400323 3.5 2.8 24 67 6 2 68.10 546400354 6.5 3.8 12 55 6 2 51.15 546400414 10.5 3.8 20 62 6 2 58.49 546400424 4.5 3.8 20 62 6 2 55.76 546400444 4.5 3.8 32 74 6 2 68.10 546400455 8.0 4.8 15 58 6 2 51.15 546400515 5.5 4.8 25 70 6 2 55.76 546400545 13.0 4.8 25 70 6 2 58.49 546400525 5.5 4.8 40 88 6 2 68.10 546400556 10.0 5.8 18 58 6 2 51.15 546400616 7.0 5.8 30 70 6 2 55.76 546400646 16.0 5.8 30 70 6 2 58.49 546400626 7.0 5.8 48 88 6 2 66.80 546400658 13.0 7.7 24 64 8 2 65.42 546400818 21.0 7.7 40 80 8 2 76.41 546400828 9.0 7.7 40 80 8 2 72.84 546400848 9.0 7.7 64 104 8 2 87.45 54640085
10 16.0 9.7 30 74 10 2 87.87 5464010110 11.0 9.7 50 94 10 2 97.77 5464010410 26.0 9.7 50 94 10 2 100.67 5464010210 11.0 9.7 80 124 10 2 117.10 5464010512 19.0 11.6 36 85 12 2 124.58 5464012112 13.0 11.6 96 145 12 2 225.54 5464012512 13.0 11.6 60 109 12 2 163.24 5464012412 31.0 11.6 60 109 12 2 170.72 5464012214 22.0 13.6 42 91 14 2 155.79 5464014114 15.0 13.6 70 119 14 2 204.29 5464014414 36.0 13.6 70 119 14 2 214.26 5464014214 15.0 13.6 112 161 14 2 293.98 5464014516 25.0 15.5 48 100 16 2 205.61 5464016116 41.0 15.5 80 132 16 2 281.54 5464016216 17.0 15.5 80 132 16 2 267.88 5464016416 17.0 15.5 128 180 16 2 402.41 5464016518 29.0 17.5 54 106 18 2 285.33 5464018118 20.0 17.5 90 142 18 2 373.70 5464018418 47.0 17.5 90 142 18 2 392.45 5464018218 20.0 17.5 144 196 18 2 561.87 5464018520 32.0 19.5 60 114 20 2 287.81 5464020120 52.0 19.5 100 154 20 2 396.14 5464020220 22.0 19.5 100 154 20 2 377.50 5464020420 22.0 19.5 160 214 20 2 565.55 54640205
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 201
13
Solid Carbide Ball Nosed Cutter, Factory Standard - Radius accuracy: ± 0,01 mm
l2Ød1
l1
l3
Ød2
Ød3
Ti 1005 Ti 1005 Ti 1005
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 h6 l2 d3 l3 l1 d2 h5 Z 54 642 ... 54 642 ... 54 642 ...
mm mm mm mm mm mm £ £ £3 5.0 2.8 12 55 6 2 61.70 546420313 3.5 2.8 15 58 6 2 67.28 546420343 8.0 2.8 15 58 6 2 70.71 546420323 3.5 2.8 24 67 6 2 80.80 546420354 6.5 3.8 12 55 6 2 61.70 546420414 10.5 3.8 20 62 6 2 79.49 546420424 4.5 3.8 20 62 6 2 67.28 546420444 4.5 3.8 32 74 6 2 80.80 546420455 8.0 4.8 15 58 6 2 61.70 546420515 5.5 4.8 25 70 6 2 67.28 546420545 13.0 4.8 25 70 6 2 70.71 546420525 5.5 4.8 40 88 6 2 80.80 546420556 10.0 5.8 18 58 6 2 61.70 546420616 7.0 5.8 30 70 6 2 67.28 546420646 16.0 5.8 30 70 6 2 70.71 546420626 7.0 5.8 48 88 6 2 80.80 546420658 13.0 7.7 24 64 8 2 77.40 546420818 21.0 7.7 40 80 8 2 88.68 546420828 9.0 7.7 40 80 8 2 84.38 546420848 9.0 7.7 64 104 8 2 103.34 54642085
10 16.0 9.7 30 74 10 2 103.34 5464210110 11.0 9.7 50 94 10 2 112.70 5464210410 26.0 9.7 50 94 10 2 121.61 5464210210 11.0 9.7 80 124 10 2 134.54 5464210512 19.0 11.6 36 85 12 2 138.33 5464212112 13.0 11.6 96 145 12 2 250.45 5464212512 13.0 11.6 60 109 12 2 180.69 5464212412 31.0 11.6 60 109 12 2 190.65 5464212214 22.0 13.6 42 91 14 2 171.91 5464214114 15.0 13.6 70 119 14 2 224.22 5464214414 36.0 13.6 70 119 14 2 235.50 5464214214 15.0 13.6 112 161 14 2 322.70 5464214516 25.0 15.5 48 100 16 2 221.74 5464216116 41.0 15.5 80 132 16 2 305.26 5464216216 17.0 15.5 80 132 16 2 290.32 5464216416 17.0 15.5 128 180 16 2 436.00 5464216518 29.0 17.5 54 106 18 2 302.76 5464218118 20.0 17.5 90 142 18 2 396.14 5464218418 47.0 17.5 90 142 18 2 416.07 5464218218 20.0 17.5 144 196 18 2 594.26 5464218520 32.0 19.5 60 114 20 2 308.93 5464220120 52.0 19.5 100 154 20 2 424.84 5464220220 22.0 19.5 100 154 20 2 404.91 5464220420 22.0 19.5 160 214 20 2 606.71 54642205
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 300-301 ●
Solid Carbide milling cutters
13 / 202 toolingcenter.com
Solid Carbide Ball Nosed Cutter, ≈ DIN 6527 - Radius accuracy: ± 0,01 mm
l2
Ød1
l1
l3
Ød2
Ød3
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 l2 d3 l3 l1 d2 h5 Z 50 953 ... 50 953 ...
mm mm mm mm mm mm £ £4 8 3.9 15 54 6 3 55.89 509530404 11 3.9 16 57 6 3 55.89 509530415 9 4.9 16 54 6 3 55.89 509530505 13 4.9 19 57 6 3 55.89 509530516 10 5.9 17 54 6 3 53.43 509530606 13 5.9 19 57 6 3 55.89 509530618 12 7.8 20 58 8 3 59.60 509530808 19 7.8 25 63 8 3 64.07 50953081
10 14 9.7 24 66 10 3 100.67 5095310010 22 9.7 30 72 10 3 109.86 5095310112 16 11.7 26 73 12 3 139.87 5095312012 26 11.7 36 83 12 3 149.48 5095312116 22 15.5 32 82 16 3 279.40 5095316016 36 15.5 42 92 16 3 291.50 5095316120 26 19.5 40 92 20 3 404.20 5095320020 38 19.5 52 104 20 3 420.10 50953201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 290-291● ● ○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 203
13
Solid Carbide Ball Nosed Cutter, ≈ DIN 6527 / Factory Standard - Radius accuracy: ± 0,01 mm
l2
Ød1
l1
l5
Ød2
l5 with Shank DIN 6535 HB
blank blank
PG V0 PG V0Article no. Article no.
d1 f8 l2 l5 l1 d2 h5 Z 50 642 ... 50 642 ...
mm mm mm mm mm £ £3 8 21 57 6 4 34.54 506420304 11 21 57 6 4 34.54 506420406 13 21 57 6 4 34.54 506420606 40 64 100 6 4 42.60 506420618 19 27 63 8 4 39.62 506420808 40 64 100 8 4 49.01 50642081
10 22 32 72 10 4 67.63 5064210010 40 60 100 10 4 86.73 5064210112 26 38 83 12 4 90.65 5064212012 45 55 100 12 4 117.69 5064212112 75 105 150 12 4 182.59 5064212214 26 38 83 14 4 114.61 5064214014 45 55 100 14 4 163.13 5064214116 32 44 92 16 4 161.47 5064216016 75 102 150 16 4 223.51 5064216120 38 54 104 20 4 223.75 5064220020 75 100 150 20 4 354.62 50642201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○
Solid Carbide milling cutters
13 / 204 toolingcenter.com
Solid Carbide Ball Nosed Cutter, ≈ DIN 6527 / Factory Standard - Radius accuracy: ± 0,01 mm
l2
Ød1
l1
l5
Ød2
l5 with Shank DIN 6535 HB
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 l2 l5 l1 d2 h5 Z 50 643 ... 50 643 ...
mm mm mm mm mm £ £3 8 21 57 6 4 39.62 506430304 11 21 57 6 4 39.62 506430406 13 21 57 6 4 39.62 506430606 40 64 100 6 4 51.15 506430618 19 27 63 8 4 43.30 506430808 40 64 100 8 4 56.72 50643081
10 22 32 72 10 4 69.26 5064310010 40 60 100 10 4 94.67 5064310112 26 38 83 12 4 92.06 5064312012 45 55 100 12 4 125.65 5064312112 75 105 150 12 4 190.29 5064312214 26 38 83 14 4 112.31 5064314014 45 55 100 14 4 170.85 5064314116 32 44 92 16 4 158.51 5064316016 75 102 150 16 4 231.34 5064316120 38 54 104 20 4 204.06 5064320020 75 100 150 20 4 362.44 50643201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 205
13
Solid Carbide Ball Nosed Cutter, ≈ DIN 6527 / Factory Standard - Radius accuracy: ± 0,01 mm
l2
Ød1
l1
l5
Ød2
l5 with Shank DIN 6535 HB Ti 1000 Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 f8 l2 l5 l1 d2 h5 Z 50 645 ... 50 645 ... 50 646 ... 50 646 ...
mm mm mm mm mm £ £ £ £3 5 50 3 4 37.95 506450303 5 75 3 4 37.95 506460304 8 75 4 4 49.12 506460404 8 54 4 4 41.89 506450405 9 75 5 4 52.61 506460505 9 54 5 4 45.09 506450506 10 18 54 6 4 45.93 506450606 10 64 100 6 4 53.78 506460608 12 64 100 8 4 72.49 506460808 12 22 58 8 4 52.57 5064508010 14 60 100 10 4 88.63 5064610010 14 26 66 10 4 69.72 5064510012 16 55 100 12 4 112.48 5064612012 16 28 73 12 4 86.61 5064512014 18 55 100 14 4 142.84 5064614014 18 30 75 14 4 113.42 5064514016 22 102 150 16 4 221.98 5064616016 22 34 82 16 4 154.47 5064516020 26 100 150 20 4 314.27 5064620020 26 42 92 20 4 232.77 50645200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247○ ● ○ ○ ● ●
Solid Carbide milling cutters
13 / 206 toolingcenter.com
Solid carbide ball nose cutter for rough milling, DIN 6527 - Radius accuracy: ± 0,01 mm
l2
Ød1
l1
l5
Ød2
l5 with Shank DIN 6535 HB Ti 400
PG V0Article no.
d1 d11 l2 l5 l1 d2 h5 Z 50 641 ...
mm mm mm mm mm £6 13 21 57 6 4 85.89 506410608 19 27 63 8 4 94.86 5064108010 22 32 72 10 4 101.56 5064110012 26 38 83 12 4 131.45 5064112014 26 38 83 14 4 186.03 5064114016 32 44 92 16 4 190.43 5064116018 32 44 92 18 4 275.00 5064118020 38 54 104 20 4 282.36 50641200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 207
13
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 15°
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 649 ... 50 649 ...
mm mm mm mm mm mm mm £ £0.2 0.02 0.2 0.18 0.6 55 6 2 68.33 506499210.2 0.02 0.2 0.18 1.0 55 6 2 68.94 506490220.2 0.02 0.2 0.18 1.6 55 6 2 69.65 506490230.2 0.02 0.2 0.18 2.0 55 6 2 70.47 506490240.3 0.03 0.3 0.28 0.9 55 6 2 68.33 506490310.3 0.03 0.3 0.28 1.5 55 6 2 68.94 506490320.3 0.03 0.3 0.28 2.4 55 6 2 69.65 506490330.3 0.03 0.3 0.28 3.0 55 6 2 70.47 506490340.4 0.04 0.4 0.37 1.2 55 6 2 68.33 506490410.4 0.04 0.4 0.37 2.0 55 6 2 68.94 506490420.4 0.04 0.4 0.37 3.2 55 6 2 69.65 506490430.4 0.04 0.4 0.45 4.0 55 6 2 70.47 506490440.5 0.05 0.5 0.45 1.5 55 6 2 66.57 506490510.5 0.05 0.5 0.45 2.5 55 6 2 67.28 506490520.5 0.05 0.5 0.45 4.0 55 6 2 68.33 506490530.5 0.05 0.5 0.45 5.0 55 6 2 68.94 506490540.6 0.06 0.6 0.58 2.0 55 6 2 56.10 506490610.6 0.06 0.6 0.58 3.0 55 6 2 50.62 506499600.6 0.06 0.6 0.58 5.0 65 6 2 60.87 506490630.6 0.06 0.6 0.58 6.0 65 6 2 58.43 506499610.8 0.08 0.8 0.77 2.5 55 6 2 55.89 506490810.8 0.08 0.8 0.77 4.0 55 6 2 50.62 506499800.8 0.08 0.8 0.77 6.5 65 6 2 62.17 506490830.8 0.08 0.8 0.77 8.0 65 6 2 58.43 506499811.0 0.10 1.0 0.95 3.0 55 6 2 55.89 506491011.0 0.10 1.0 0.95 5.0 55 6 2 50.62 506490101.0 0.10 1.0 0.95 8.0 65 6 2 59.09 506491031.0 0.10 1.0 0.95 10.0 65 6 2 58.43 506490111.0 0.10 1.0 0.95 12.0 65 6 2 66.08 506491051.2 0.12 1.2 1.15 3.0 55 6 2 55.89 506491211.2 0.12 1.2 1.15 6.0 55 6 2 50.62 506490121.2 0.12 1.2 1.15 10.0 65 6 2 62.17 506491231.2 0.12 1.2 1.15 12.0 65 6 2 58.43 506490131.3 0.13 1.3 1.25 4.0 55 6 2 55.89 506491311.3 0.13 1.3 1.25 7.0 55 6 2 56.10 506491321.3 0.13 1.3 1.25 11.0 65 6 2 62.17 506491331.3 0.13 1.3 1.25 13.0 65 6 2 66.08 506491341.5 0.15 1.5 1.44 5.0 55 6 2 56.10 506491511.5 0.15 1.5 1.44 7.5 55 6 2 50.62 506490151.5 0.15 1.5 1.44 12.0 65 6 2 66.08 506491531.5 0.15 1.5 1.44 15.0 65 6 2 58.43 506490161.6 0.16 1.6 1.52 5.0 55 6 2 56.10 506491611.6 0.16 1.6 1.52 8.0 55 6 2 56.10 506491621.6 0.16 1.6 1.52 13.0 65 6 2 62.17 506491631.6 0.16 1.6 1.52 16.0 65 6 2 66.08 506491641.8 0.18 1.8 1.72 5.5 55 6 2 55.89 506491811.8 0.18 1.8 1.72 9.0 55 6 2 56.10 506491821.8 0.18 1.8 1.72 14.5 65 6 2 62.17 506491831.8 0.18 1.8 1.72 18.0 65 6 2 66.08 506491842.0 0.20 2.0 1.92 6.0 55 6 2 55.89 50649201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
continued on next page
13 / 208 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 15°
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 649 ... 50 649 ...
mm mm mm mm mm mm mm £ £2.0 0.20 2.0 1.92 10.0 55 6 2 56.10 506492022.0 0.20 2.0 1.92 14.0 55 6 2 50.62 506490202.0 0.20 2.0 1.92 16.0 65 6 2 66.08 506492042.0 0.20 2.0 1.92 20.0 65 6 2 58.43 506490212.3 0.23 2.3 2.22 7.0 55 6 2 56.10 506492312.3 0.23 2.3 2.22 11.5 55 6 2 59.09 506492322.3 0.23 2.3 2.22 18.5 65 6 2 66.08 506492332.3 0.23 2.3 2.22 23.0 65 6 2 66.08 506492343.0 0.30 3.0 2.90 9.0 65 6 2 59.09 506493013.0 0.30 3.0 2.90 15.0 65 6 2 66.08 506493023.0 0.30 3.0 2.90 24.0 100 6 2 71.66 506493033.0 0.30 3.0 2.90 30.0 100 6 2 74.51 506493044.0 0.40 4.0 3.90 12.0 65 6 2 66.08 506494014.0 0.40 4.0 3.90 20.0 65 6 2 66.08 506494024.0 0.40 4.0 3.90 32.0 100 6 2 74.51 506494034.0 0.40 4.0 3.90 40.0 100 6 2 77.00 506494045.0 0.50 5.0 4.90 15.0 65 6 2 66.08 506495015.0 0.50 5.0 4.90 25.0 65 6 2 66.08 506495025.0 0.50 5.0 4.90 40.0 100 6 2 77.00 506495035.0 0.50 5.0 4.90 50.0 100 6 2 79.38 506495046.0 0.60 6.0 5.90 18.0 65 6 2 66.08 506496016.0 0.60 6.0 5.90 30.0 100 6 2 74.51 506496026.0 0.60 6.0 5.90 48.0 100 6 2 79.38 506496036.0 0.60 6.0 5.90 60.0 100 6 2 81.71 50649604
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 209
13
Solid Carbide Torus Cutter, Factory Standard
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 651 ... 50 651 ... 50 651 ...
mm mm mm mm mm mm mm £ £ £2 0.3 2 1.8 7 50 6 2 43.66 506510202 0.5 2 1.8 7 50 6 2 43.66 506510212 0.3 2 1.8 7 60 6 2 43.66 506510222 0.5 2 1.8 7 60 6 2 43.66 506510232 0.3 2 1.8 7 85 6 2 63.36 506510242 0.5 2 1.8 7 85 6 2 63.36 506510253 0.3 2 2.8 7 50 6 2 43.66 506510303 0.5 2 2.8 7 50 6 2 43.66 506510313 0.3 2 2.8 12 60 6 2 43.66 506510323 0.5 2 2.8 12 60 6 2 43.66 506510333 0.3 2 2.8 12 85 6 2 63.36 506510343 0.5 2 2.8 12 85 6 2 63.36 506510354 0.3 3 3.8 13 54 6 2 43.66 506510404 0.5 3 3.8 13 54 6 2 43.66 506510414 1.0 3 3.8 13 54 6 2 43.66 506510424 0.3 3 3.8 20 75 6 2 60.87 506510434 0.5 3 3.8 20 75 6 2 60.87 506510444 1.0 3 3.8 20 75 6 2 60.87 506510454 0.3 3 3.8 20 85 6 2 63.36 506510464 0.5 3 3.8 20 85 6 2 63.36 506510474 1.0 3 3.8 20 85 6 2 63.36 506510485 0.5 3 4.6 13 54 6 2 43.66 506510505 1.0 3 4.6 13 54 6 2 43.66 506510515 1.5 3 4.6 13 54 6 2 43.66 506510525 1.0 3 4.6 20 75 6 2 60.87 506510535 1.5 3 4.6 20 75 6 2 60.87 506510546 0.5 4 5.6 14 54 6 2 43.66 506510606 1.0 4 5.6 14 54 6 2 43.66 506510616 2.0 4 5.6 14 54 6 2 43.66 506510626 0.5 4 5.6 45 85 6 2 60.87 506510666 1.0 4 5.6 45 85 6 2 81.75 506510676 2.0 4 5.6 45 85 6 2 60.87 506510686 0.5 4 5.6 25 100 6 2 70.47 506510696 1.0 4 5.6 25 100 6 2 70.47 506510706 2.0 4 5.6 25 100 6 2 70.47 506510716 0.5 4 5.6 25 85 8 2 81.75 506510636 1.0 4 5.6 25 85 8 2 60.87 506510646 2.0 4 5.6 25 85 8 2 81.75 506510658 0.5 4 7.6 16 58 8 2 53.15 506510808 1.0 4 7.6 16 58 8 2 53.15 506510818 2.0 4 7.6 16 58 8 2 53.15 506510828 0.5 4 7.6 50 100 8 2 113.42 506510838 2.0 4 7.6 50 100 8 2 80.90 506510848 1.0 4 7.6 30 100 10 2 113.42 506510858 2.0 4 7.6 30 100 10 2 111.17 5065108610 1.0 6 9.6 18 66 10 2 65.96 5065110010 3.0 6 9.6 18 66 10 2 65.96 5065110110 1.0 6 9.6 50 100 10 2 111.88 5065110210 2.0 6 9.6 50 100 10 2 65.96 5065110310 3.0 6 9.6 50 100 10 2 111.88 5065110410 1.0 6 9.6 60 120 10 2 134.30 50651105
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
continued on next page
13 / 210 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 651 ... 50 651 ... 50 651 ...
mm mm mm mm mm mm mm £ £ £10 2.0 6 9.6 60 120 10 2 111.88 5065110610 3.0 6 9.6 60 120 10 2 134.30 5065110710 1.0 6 9.6 30 120 12 2 173.10 5065110810 2.0 6 9.6 30 120 12 2 173.10 5065110910 3.0 6 9.6 30 120 12 2 173.10 5065111012 1.0 8 11.5 18 73 12 2 96.46 5065112012 2.0 8 11.5 18 73 12 2 96.46 5065112112 3.0 8 11.5 18 73 12 2 96.46 5065112212 4.0 8 11.5 18 73 12 2 96.46 5065112312 1.0 8 11.5 45 100 12 2 144.26 5065112412 2.0 8 11.5 45 100 12 2 144.26 5065112512 3.0 8 11.5 45 100 12 2 144.26 5065112612 4.0 8 11.5 45 100 12 2 144.26 5065112712 1.0 8 11.5 70 120 12 2 173.22 5065112812 2.0 8 11.5 70 120 12 2 173.22 5065112912 3.0 8 11.5 70 120 12 2 173.22 5065113012 4.0 8 11.5 70 120 12 2 173.22 5065113112 1.0 8 11.5 35 150 16 2 352.48 5065113212 2.0 8 11.5 35 150 16 2 352.48 5065113312 3.0 8 11.5 35 150 16 2 352.48 5065113412 4.0 8 11.5 35 150 16 2 352.48 50651135
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 211
13
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 15°
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 901 ... 50 901 ...
mm mm mm mm mm mm mm £ £0.2 0.02 0.2 0.18 0.6 55 3 2 67.99 509010210.2 0.02 0.2 0.18 1.0 55 3 2 68.94 509010220.2 0.02 0.2 0.18 1.6 55 3 2 69.65 509010230.2 0.02 0.2 0.18 2.0 55 3 2 70.47 509010240.3 0.03 0.3 0.28 0.9 55 3 2 67.99 509010310.3 0.03 0.3 0.28 1.5 55 3 2 68.94 509010320.3 0.03 0.3 0.28 2.4 55 3 2 69.65 509010330.3 0.03 0.3 0.28 3.0 55 3 2 70.47 509010340.4 0.04 0.4 0.37 1.2 55 3 2 67.99 509010410.4 0.04 0.4 0.37 2.0 55 3 2 68.94 509010420.4 0.04 0.4 0.37 3.2 55 3 2 69.65 509010430.4 0.04 0.4 0.37 4.0 55 3 2 70.47 509010440.5 0.05 0.5 0.45 1.5 55 3 2 66.57 509010510.5 0.05 0.5 0.45 2.5 55 3 2 67.28 509010520.5 0.05 0.5 0.45 4.0 55 3 2 67.99 509010530.5 0.05 0.5 0.45 5.0 55 3 2 68.94 509010540.6 0.06 0.6 0.58 2.0 55 3 2 56.10 509010610.6 0.06 0.6 0.58 3.0 55 3 2 56.10 509010620.6 0.06 0.6 0.58 4.2 55 3 2 55.89 509010630.6 0.06 0.6 0.58 5.0 65 3 2 66.08 509010640.6 0.06 0.6 0.58 6.0 65 3 2 64.43 509010650.8 0.08 0.8 0.77 2.5 55 3 2 55.89 509010810.8 0.08 0.8 0.77 4.0 55 3 2 55.89 509010820.8 0.08 0.8 0.77 6.5 65 3 2 62.17 509010830.8 0.08 0.8 0.77 8.0 65 3 2 64.43 509010841.0 0.10 1.0 0.95 3.0 55 3 2 55.89 509011011.0 0.10 1.0 0.95 5.0 55 3 2 55.89 509011021.0 0.10 1.0 0.95 8.0 65 3 2 59.09 509011031.0 0.10 1.0 0.95 10.0 65 3 2 64.43 509011041.0 0.10 1.0 0.95 12.0 65 3 2 66.08 509011051.2 0.12 1.2 1.15 3.0 55 3 2 55.89 509011211.2 0.12 1.2 1.15 6.0 55 3 2 55.89 509011221.2 0.12 1.2 1.15 10.0 65 3 2 62.17 509011231.2 0.12 1.2 1.15 12.0 65 3 2 64.43 509011241.3 0.13 1.3 1.25 4.0 55 3 2 55.89 509011311.3 0.13 1.3 1.25 7.0 55 3 2 56.10 509011321.3 0.13 1.3 1.25 11.0 65 3 2 62.17 509011331.3 0.13 1.3 1.25 13.0 65 3 2 66.08 509011341.5 0.15 1.5 1.44 5.0 55 3 2 56.10 509011511.5 0.15 1.5 1.44 7.5 55 3 2 55.89 509011521.5 0.15 1.5 1.44 12.0 65 3 2 66.08 509011531.5 0.15 1.5 1.44 15.0 65 3 2 64.43 509011541.6 0.16 1.6 1.52 5.0 55 3 2 56.10 509011611.6 0.16 1.6 1.52 8.0 55 3 2 56.10 509011621.6 0.16 1.6 1.52 13.0 65 3 2 62.17 509011631.6 0.16 1.6 1.52 16.0 65 3 2 66.08 509011641.8 0.18 1.8 1.72 5.5 55 3 2 55.89 509011811.8 0.18 1.8 1.72 9.0 55 3 2 56.10 509011821.8 0.18 1.8 1.72 14.5 65 3 2 62.17 509011831.8 0.18 1.8 1.72 18.0 65 3 2 66.08 50901184
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
continued on next page
13 / 212 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 15°
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1001 Ti 1001
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 901 ... 50 901 ...
mm mm mm mm mm mm mm £ £2.0 0.20 2.0 1.92 6.0 55 3 2 55.89 509012012.0 0.20 2.0 1.92 10.0 55 3 2 56.10 509012022.0 0.20 2.0 1.92 14.0 55 3 2 55.89 509012032.0 0.20 2.0 1.92 16.0 65 3 2 66.08 509012042.0 0.20 2.0 1.92 20.0 65 3 2 64.43 509012052.3 0.23 2.3 2.22 7.0 55 3 2 55.89 509012312.3 0.23 2.3 2.22 11.5 55 3 2 56.10 509012322.3 0.23 2.3 2.22 14.0 55 3 2 59.09 509012332.3 0.23 2.3 2.22 18.5 65 3 2 66.08 509012342.3 0.23 2.3 2.22 20.0 65 3 2 66.08 509012352.3 0.23 2.3 2.22 23.0 65 3 2 66.08 509012363.0 0.30 3.0 2.90 9.0 65 6 2 59.09 509013013.0 0.30 3.0 2.90 15.0 65 6 2 66.08 509013023.0 0.30 3.0 2.90 24.0 100 6 2 71.66 509013033.0 0.30 3.0 2.90 30.0 100 6 2 74.51 509013044.0 0.40 4.0 3.90 12.0 65 6 2 66.08 509014014.0 0.40 4.0 3.90 20.0 65 6 2 66.08 509014024.0 0.40 4.0 3.90 32.0 100 6 2 74.51 509014034.0 0.40 4.0 3.90 40.0 100 6 2 77.00 509014045.0 0.50 5.0 4.90 15.0 65 6 2 66.08 509015015.0 0.50 5.0 4.90 25.0 65 6 2 66.08 509015025.0 0.50 5.0 4.90 40.0 100 6 2 77.00 509015035.0 0.50 5.0 4.90 50.0 100 6 2 79.38 509015046.0 0.60 6.0 5.90 18.0 65 6 2 66.08 509016016.0 0.60 6.0 5.90 30.0 100 6 2 74.51 509016026.0 0.60 6.0 5.90 48.0 100 6 2 79.38 509016036.0 0.60 6.0 5.90 60.0 100 6 2 81.71 50901604
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 213
13
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 45°
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1001 Ti 1001 Ti 1001
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 902 ... 50 902 ... 50 902 ...
mm mm mm mm mm mm mm £ £ £2 0.3 2 1.8 12 50 6 2 59.68 509020202 0.5 2 1.8 12 50 6 2 59.68 509020232 0.3 2 1.8 22 60 6 2 59.68 509020212 0.5 2 1.8 22 60 6 2 59.68 509020242 0.3 2 1.8 47 85 6 2 86.73 509020222 0.5 2 1.8 47 85 6 2 86.73 509020253 0.3 2 2.8 12 50 6 2 59.68 509020303 0.5 2 2.8 12 50 6 2 59.68 509020333 0.3 2 2.8 22 60 6 2 59.68 509020313 0.5 2 2.8 22 60 6 2 59.68 509020343 0.3 2 2.8 47 85 6 2 86.73 509020323 0.5 2 2.8 47 85 6 2 86.73 509020354 0.3 3 3.8 16 54 6 2 59.68 509020404 0.5 3 3.8 16 54 6 2 59.68 509020434 1.0 3 3.8 16 54 6 2 59.68 509020464 0.3 3 3.8 37 75 6 2 81.71 509020414 0.5 3 3.8 37 75 6 2 81.71 509020444 1.0 3 3.8 37 75 6 2 81.71 509020474 0.3 3 3.8 47 85 6 2 86.73 509020424 0.5 3 3.8 47 85 6 2 86.73 509020454 1.0 3 3.8 47 85 6 2 86.73 509020485 0.5 3 4.6 16 54 6 2 59.68 509020505 1.0 3 4.6 16 54 6 2 59.68 509020525 1.5 3 4.6 16 54 6 2 59.68 509020545 0.5 3 4.6 37 75 6 2 81.71 509020515 1.0 2 4.6 37 75 6 2 81.71 509020535 1.5 3 4.6 37 75 6 2 81.71 509020556 0.5 4 5.6 16 54 6 2 59.68 509020606 1.0 4 5.6 16 54 6 2 59.68 509020636 2.0 4 5.6 16 54 6 2 59.68 509020666 0.5 4 5.6 47 85 6 2 81.71 509020616 1.0 4 5.6 47 85 6 2 81.71 509020646 2.0 4 5.6 47 85 6 2 81.71 509020676 0.5 4 5.6 47 85 8 2 112.35 509020696 1.0 4 5.6 47 85 8 2 112.35 509020706 2.0 4 5.6 47 85 8 2 112.35 509020716 0.5 4 5.6 62 100 6 2 96.46 509020626 1.0 4 5.6 62 100 6 2 96.46 509020656 2.0 4 5.6 62 100 6 2 96.46 509020688 0.5 4 7.6 20 58 8 2 72.84 509020808 1.0 4 7.6 20 58 8 2 72.84 509020828 2.0 4 7.6 20 58 8 2 72.84 509020848 0.5 4 7.6 62 100 8 2 112.84 509020818 1.0 4 7.6 62 100 8 2 112.84 509020838 2.0 4 7.6 62 100 8 2 112.84 509020858 2.0 4 7.6 62 100 10 2 156.01 5090208610 1.0 6 9.6 18 66 10 2 89.03 5090210010 2.0 6 9.6 18 66 10 2 89.03 5090210310 3.0 6 9.6 18 66 10 2 89.03 5090210610 1.0 6 9.6 58 100 10 2 154.36 50902101
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
continued on next page
13 / 214 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 45°
l2Ød1
l1
l3
Ød3
Ød2
r
Ti 1001 Ti 1001 Ti 1001
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 902 ... 50 902 ... 50 902 ...
mm mm mm mm mm mm mm £ £ £10 2.0 6 9.6 58 100 10 2 154.36 5090210410 3.0 6 9.6 58 100 10 2 154.36 5090210710 1.0 6 9.6 78 120 10 2 185.32 5090210210 2.0 6 9.6 78 120 10 2 185.32 5090210510 3.0 6 9.6 78 120 10 2 185.32 5090210810 1.0 6 9.6 78 120 12 2 238.23 5090210910 2.0 6 9.6 78 120 12 2 238.23 5090211010 3.0 6 9.6 78 120 12 2 238.23 5090211112 1.0 8 11.5 26 73 12 2 132.06 5090212012 2.0 8 11.5 26 73 12 2 132.06 5090212312 3.0 8 11.5 26 73 12 2 132.06 5090212612 4.0 8 11.5 26 73 12 2 132.06 5090212912 1.0 8 11.5 53 100 12 2 198.49 5090212112 2.0 8 11.5 53 100 12 2 198.49 5090212412 3.0 8 11.5 53 100 12 2 198.49 5090212712 4.0 8 11.5 53 100 12 2 198.49 5090213012 1.0 8 11.5 73 120 12 2 238.23 5090212212 2.0 8 11.5 73 120 12 2 238.23 5090212512 3.0 8 11.5 73 120 12 2 238.23 5090212812 4.0 8 11.5 73 120 12 2 238.23 5090213112 1.0 8 11.5 103 150 16 2 483.56 5090213212 2.0 8 11.5 103 150 16 2 483.56 5090213312 3.0 8 11.5 103 150 16 2 483.56 5090213412 4.0 8 11.5 103 150 16 2 483.56 50902135
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 215
13
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 45°
l2Ød1
l1
l3
Ød3
Ød2
r Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 652 ... 50 652 ...
mm mm mm mm mm mm mm £ £4 0.5 8 3.8 16 54 6 4 42.35 506520404 1.0 8 3.8 16 54 6 4 42.35 506520414 0.5 10 3.8 37 75 6 4 58.08 506520424 1.0 10 3.8 37 75 6 4 58.08 506520435 0.5 9 4.8 16 54 6 4 42.35 506520505 1.0 9 4.8 16 54 6 4 42.35 506520515 1.5 9 4.8 16 54 6 4 42.35 506520525 0.5 12 4.8 37 75 6 4 58.08 506520535 1.0 12 4.8 37 75 6 4 58.08 506520545 1.5 12 4.8 37 75 6 4 58.08 506520556 0.5 10 5.6 16 54 6 4 42.35 506520606 1.0 10 5.6 16 54 6 4 42.35 506520616 1.5 10 5.6 16 54 6 4 42.35 506520626 2.0 10 5.6 16 54 6 4 42.35 506520636 0.5 12 5.6 62 100 6 4 68.58 506520646 1.0 12 5.6 62 100 6 4 68.58 506520656 1.5 12 5.6 62 100 6 4 68.58 506520666 2.0 12 5.6 62 100 6 4 68.58 506520677 0.5 11 6.6 20 58 8 4 51.50 506520707 1.0 11 6.6 20 58 8 4 51.50 506520717 1.5 11 6.6 20 58 8 4 51.50 506520727 2.0 11 6.6 20 58 8 4 51.50 506520737 0.5 14 6.6 62 100 8 4 78.57 506520747 1.0 14 6.6 62 100 8 4 78.57 506520757 1.5 14 6.6 62 100 8 4 49.48 506520767 2.0 14 6.6 62 100 8 4 49.48 506520778 0.5 12 7.6 20 58 8 4 51.50 506520808 1.0 12 7.6 20 58 8 4 51.50 506520818 1.5 12 7.6 20 58 8 4 51.50 506520828 2.0 12 7.6 20 58 8 4 51.50 506520838 0.5 14 7.6 62 100 8 4 78.57 506520848 1.0 14 7.6 62 100 8 4 78.57 506520858 1.5 14 7.6 62 100 8 4 78.57 506520868 2.0 14 7.6 62 100 8 4 78.57 5065208710 0.5 14 9.6 24 66 10 4 64.43 5065210010 1.0 14 9.6 24 66 10 4 64.43 5065210110 1.5 14 9.6 24 66 10 4 64.43 5065210210 2.0 14 9.6 24 66 10 4 64.43 5065210310 3.0 14 9.6 24 66 10 4 64.43 5065210410 0.5 18 9.6 58 100 10 4 108.80 5065210510 1.0 18 9.6 58 100 10 4 108.80 5065210610 1.5 18 9.6 58 100 10 4 108.80 5065210710 2.0 18 9.6 58 100 10 4 108.80 5065210810 3.0 18 9.6 58 100 10 4 108.80 5065210912 0.5 16 11.5 26 73 12 4 93.73 5065212012 1.0 16 11.5 26 73 12 4 93.73 5065212112 1.5 16 11.5 26 73 12 4 93.73 5065212212 2.0 16 11.5 26 73 12 4 93.73 5065212312 4.0 16 11.5 26 73 12 4 93.73 50652124
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
continued on next page
13 / 216 toolingcenter.com
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 45°
l2Ød1
l1
l3
Ød3
Ød2
r Ti 1000 Ti 1000
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 652 ... 50 652 ...
mm mm mm mm mm mm mm £ £12 0.5 22 11.5 53 100 12 4 140.36 5065212512 1.0 22 11.5 53 100 12 4 140.36 5065212612 1.5 22 11.5 53 100 12 4 140.36 5065212712 2.0 22 11.5 53 100 12 4 140.36 5065212812 4.0 22 11.5 53 100 12 4 140.36 5065212914 1.0 18 13.3 28 75 14 4 116.03 5065214014 1.5 18 13.3 28 75 14 4 116.03 5065214114 2.0 18 13.3 28 75 14 4 116.03 5065214214 2.5 18 13.3 28 75 14 4 116.03 5065214314 4.0 18 13.3 28 75 14 4 116.03 5065214414 1.0 26 13.3 73 120 14 4 223.51 5065214514 1.5 26 13.3 73 120 14 4 223.51 5065214614 2.0 26 13.3 73 120 14 4 223.51 5065214714 2.5 26 13.3 73 120 14 4 223.51 5065214814 4.0 26 13.3 73 120 14 4 223.51 5065214916 2.0 22 15.2 32 82 16 4 138.10 5065216016 2.5 22 15.2 32 82 16 4 138.10 5065216116 5.0 22 15.2 32 82 16 4 138.10 5065216216 2.0 30 15.2 100 150 16 4 301.22 5065216316 2.5 30 15.2 100 150 16 4 301.22 5065216416 5.0 30 15.2 100 150 16 4 301.22 5065216518 2.0 24 17.1 34 84 18 4 169.18 5065218018 2.5 24 17.1 34 84 18 4 169.18 5065218118 5.0 24 17.1 34 84 18 4 169.18 5065218218 2.0 34 17.1 100 150 18 4 367.43 5065218318 2.5 34 17.1 100 150 18 4 367.43 5065218418 5.0 34 17.1 100 150 18 4 367.43 5065218520 2.0 26 19.0 40 92 20 4 227.43 5065220020 2.5 26 19.0 40 92 20 4 227.43 5065220120 6.0 26 19.0 40 92 20 4 227.43 5065220220 2.0 38 19.0 98 150 20 4 342.74 5065220320 2.5 38 19.0 98 150 20 4 342.74 5065220420 6.0 38 19.0 98 150 20 4 342.74 50652205
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-247● ○ ● ○ ○ ○
Solid Carbide milling cutters
toolingcenter.com 13 / 217
13
Solid Carbide Torus Cutter, Factory Standard - Transition angle α = 45°
l2Ød1
l1
l3
Ød3
Ød2
r
DIAMOND DIAMOND
PG V0 PG V0Article no. Article no.
d1 f8 r ±0,01 l2 d3 l3 l1 d2 h5 Z 50 911 ... 50 911 ...
mm mm mm mm mm mm mm £ £4 0.5 8 3.8 12 54 6 4 119.11 509110404 1.0 8 3.8 12 54 6 4 119.11 509110414 0.5 10 3.8 37 75 6 4 142.97 509110424 1.0 10 3.8 37 75 6 4 142.97 509110435 0.5 9 4.8 16 54 6 4 119.11 509110505 1.0 9 4.8 16 54 6 4 119.11 509110515 1.5 9 4.8 16 54 6 4 119.11 509110525 0.5 12 4.8 37 75 6 4 142.97 509110535 1.0 12 4.8 37 75 6 4 142.97 509110545 1.5 12 4.8 37 75 6 4 142.97 509110556 0.5 10 5.6 16 54 6 4 119.11 509110606 1.0 10 5.6 16 54 6 4 119.11 509110616 1.5 10 5.6 16 54 6 4 119.11 509110626 2.0 10 5.6 16 54 6 4 119.11 509110636 0.5 12 5.6 62 100 6 4 156.01 509110646 1.0 12 5.6 62 100 6 4 156.01 509110656 1.5 12 5.6 62 100 6 4 156.01 509110666 2.0 12 5.6 62 100 6 4 156.01 509110677 0.5 11 6.6 20 58 8 4 156.01 509110707 1.0 11 6.6 20 58 8 4 156.01 509110717 1.5 11 6.6 20 58 8 4 156.01 509110727 2.0 11 6.6 20 58 8 4 156.01 509110737 0.5 14 6.6 62 100 8 4 195.64 509110747 1.0 14 6.6 62 100 8 4 195.64 509110757 1.5 14 6.6 62 100 8 4 195.64 509110767 2.0 14 6.6 62 100 8 4 195.64 509110778 0.5 12 7.6 20 58 8 4 156.01 509110808 1.0 12 7.6 20 58 8 4 156.01 509110818 1.5 12 7.6 20 58 8 4 156.01 509110868 2.0 12 7.6 20 58 8 4 156.01 509110838 0.5 14 7.6 62 100 8 4 195.64 509110848 1.0 14 7.6 62 100 8 4 195.64 509110858 1.5 14 7.6 62 100 8 4 195.64 509110828 2.0 14 7.6 62 100 8 4 195.64 5091108710 0.5 14 9.6 24 66 10 4 197.06 5091110010 1.0 14 9.6 24 66 10 4 197.06 5091110110 1.5 14 9.6 24 66 10 4 197.06 5091110710 2.0 14 9.6 24 66 10 4 197.06 5091110310 3.0 14 9.6 24 66 10 4 197.06 5091110410 0.5 18 9.6 58 100 10 4 258.63 5091110510 1.0 18 9.6 58 100 10 4 258.63 5091110610 1.5 18 9.6 58 100 10 4 258.63 5091110210 2.0 18 9.6 58 100 10 4 258.63 5091110810 3.0 18 9.6 58 100 10 4 258.63 5091110912 0.5 16 11.5 26 73 12 4 261.61 5091112012 1.0 16 11.5 26 73 12 4 261.61 5091112112 1.5 16 11.5 26 73 12 4 261.61 5091112712 2.0 16 11.5 26 73 12 4 261.61 5091112312 4.0 16 11.5 26 73 12 4 261.61 5091112412 0.5 22 11.5 53 100 12 4 327.80 5091112512 1.0 22 11.5 53 100 12 4 327.80 5091112612 1.5 22 11.5 53 100 12 4 327.80 5091112212 2.0 22 11.5 53 100 12 4 327.80 5091112812 4.0 22 11.5 53 100 12 4 327.80 50911129
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13 / 218 toolingcenter.com
Solid Carbide Torus Face Milling Cutter, ≈ DIN 6527 / Factory Standard - Transition angle α = 45°
l2
Ød1
l1
l3
Ød3
Ød2
r1
r2
r = programming corner radius Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 r l2 d3 l3 l1 d2 h5 r1 r2 Z 50 962 ... 50 962 ...
mm mm mm mm mm mm mm mm mm £ £6 1.12 3 5.8 16 54 6 1.0 9 4 54.94 509620606 1.12 3 5.8 44 80 6 1.0 9 4 73.69 509620618 1.23 4 7.7 20 58 8 1.0 12 4 63.24 509620808 1.23 4 7.7 54 100 8 1.0 12 4 96.34 50962081
10 1.77 5 9.7 24 66 10 1.5 15 4 108.09 5096210010 1.77 5 9.7 60 100 10 1.5 15 4 140.36 5096210112 1.86 6 11.6 26 73 12 1.5 18 4 141.07 5096212012 1.86 6 11.6 75 120 12 1.5 18 4 174.40 5096212116 2.47 8 15.5 32 82 16 2.0 24 4 265.16 5096216016 2.47 8 15.5 92 150 16 2.0 24 4 328.51 5096216120 2.61 10 19.5 40 92 20 2.0 30 4 382.85 5096220020 2.61 10 19.5 92 150 20 2.0 30 4 575.98 50962201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 298-299○ ○ ●
Solid Carbide milling cutters
toolingcenter.com 13 / 219
13
Solid Carbide Torus Face Milling Cutter, ≈ DIN 6527 / Factory Standard - Transition angle α = 45°
l2
Ød1
l1
l3
Ød3
Ød2
r1
r2
r = programming corner radius
Ti 1010 Ti 1010
PG V0 PG V0Article no. Article no.
d1 f8 r l2 d3 l3 l1 d2 h5 r1 r2 Z 50 961 ... 50 961 ...
mm mm mm mm mm mm mm mm mm £ £6 1.21 3 5.8 16 54 6 1.0 3 4 54.94 509610606 1.21 3 5.8 44 80 6 1.0 3 4 73.69 509610618 1.54 4 7.7 20 58 8 1.0 4 4 63.24 509610808 1.54 4 7.7 54 100 8 1.0 4 4 96.34 50961081
10 1.70 5 9.7 24 66 10 1.5 5 4 108.09 5096110010 1.70 5 9.7 60 100 10 1.5 5 4 140.36 5096110112 2.25 6 11.6 26 73 12 1.5 6 4 141.07 5096112012 2.25 6 11.6 75 120 12 1.5 6 4 174.40 5096112116 3.10 8 15.5 32 82 16 2.0 8 4 265.16 5096116016 3.10 8 15.5 92 150 16 2.0 8 4 328.51 5096116120 4.00 10 19.5 40 92 20 2.0 10 4 382.85 5096120020 4.00 10 19.5 92 150 20 2.0 10 4 575.98 50961201
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 296-297● ● ○ ○
Solid Carbide milling cutters
13 / 220 toolingcenter.com
Solid carbide NC deburring cutter, factory standard
Ød1
l1
Ød2
α = 60° α = 90° α = 120°
blank blank blank
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 h6 l1 d2 h6 Z 50 940 ... 50 941 ... 50 942 ...
mm mm mm £ £ £4 54 4 4 21.65 50940040 1) 21.65 50941040 1) 21.65 50942040 1)
6 54 6 4 27.82 50940060 27.82 50941060 27.82 509420608 58 8 4 33.58 50940080 33.58 50941080 33.58 5094208010 66 10 4 41.29 50940100 41.29 50941100 41.29 5094210012 73 12 4 57.91 50940120 57.91 50941120 57.91 50942120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○
1) DIN 6535 HA Shank
Solid carbide NC deburring cutter, factory standard
Ød1
l1
Ød2
α = 60° α = 90° α = 120°
Ti 1000 Ti 1000 Ti 1000
PG V0 PG V0 PG V0Article no. Article no. Article no.
d1 h6 l1 d2 h6 Z 50 943 ... 50 944 ... 50 945 ...
mm mm mm £ £ £4 54 4 4 29.43 50943040 1) 29.43 50944040 1) 29.43 50945040 1)
6 54 6 4 39.27 50943060 39.27 50944060 39.27 509450608 58 8 4 47.82 50943080 47.82 50944080 47.82 5094508010 66 10 4 58.13 50943100 58.13 50944100 58.13 5094510012 73 12 4 79.25 50943120 79.25 50944120 79.25 50945120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-243● ○ ● ○ ○ ○
1) DIN 6535 HA Shank
Solid Carbide milling cutters
toolingcenter.com 13 / 221
13
MaterialStrength
50 9
81 ..
. –
50 9
88 ..
.
50 9
32 ..
.
50 9
37 ..
.
50 9
36 ..
.
50 9
38 ..
.
50 6
10/6
11
– 52 1
03/1
04
50 9
39 ..
.
50 9
46 ..
.
50 9
48 ..
.
50 9
47 ..
.
(N/mm² - HB)
N
Aluminium (non alloyed, low alloyed) < 350 N/mm2 �
Aluminium < 500 N/mm2 �
Aluminium alloy 0,5 - 10% Si < 400 N/mm2 �
Aluminium alloy 10 - 15% Si < 400 N/mm2 � � � � �
Aluminium < 400 N/mm2 � � � � �
Copper (non alloyed, low alloyed) < 350 N/mm2 �
Copper wrought alloys < 700 N/mm2 � � � � �
Special copper alloys < 200 HB � � � � �
Special copper alloys < 300 HB � � � � �
Special copper alloys < 300 HB � � � � �
Short-chipping brass, bronze, red bronze < 600 N/mm2 �
Long-chipping brass < 600 N/mm2 �
Thermoplastics �
Duroplastics � � � �
Fibre-reinforced plastics � � � � � � � � �
Magnesium and Magnesium Alloys < 850 N/mm2 � � � � �
Graphite � � � � � � �
Tungsten and tungsten alloys � �
Molybdenum and molybdenum alloys � �
Machining direction
� � � � � � �
Application data for plastics cutters
Tips:
� Very sharp cutting edges for GFK and CFK and to prevent delamination of the component.
�For excellent tool life when machining AFK, CFK and Graphite.
�
�Specialist for machining honeycomb materials; Milling of pockets not fully through the workpiece.
Specialist for machining honeycomb materials.
Milling of recesses that pass through the material, the lower deck is pushed and upper deck pulled therefore the workpiece material is stabilized.
For machining non fibre-reinforced plastics and non-ferrous metals with low silicon content. (PE, PA, PVC, acrylic glass)
�
For machining fibre-reinforced plastics and non-ferrous metals with high silicon content.
Coatings for Plastics Cutters
�Ti28: CrCN+DLC
Ti40: TiB2
�DC10: Diamond Coating
Solid Carbide milling cutters
13 / 222 toolingcenter.com
Solid carbide cutter for plastics, factory standard - right hand cutting - cross-pitched - Downward chip evacuation - 50 981 ... and 50 983 ... = fine pitch - 50 982 ... and 50 984 ... = medium pitch
l2
Ød2
Ød1
l1
blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h10 l2 l1 d2 h6 50 981 ... 50 982 ... 50 983 ... 50 984 ...
mm mm mm mm £ £ £ £2.0 7 40 2.0 10.04 50981020 11.07 50982020 11.67 50983020 13.23 509840202.0 7 50 6.0 21.70 50981021 21.70 50982021 23.18 50983021 23.18 509840213.0 10 40 3.0 10.04 50981030 11.07 50982030 11.67 50983030 13.23 509840303.0 12 50 6.0 21.70 50981031 21.70 50982031 23.18 50983031 23.18 509840313.5 12 40 3.5 11.59 50981035 12.89 50982035 13.14 50983035 14.58 509840354.0 15 40 4.0 13.43 50981040 14.70 50982040 14.41 50983040 15.93 509840404.0 20 50 6.0 21.70 50981041 21.70 50982041 23.18 50983041 23.18 509840414.5 15 50 4.5 15.41 50981045 17.07 50982045 16.67 50983045 18.43 509840455.0 16 50 5.0 17.52 50981050 19.32 50982050 18.80 50983050 20.91 509840505.0 25 75 6.0 33.11 50981051 33.11 50982051 34.58 50983051 34.58 509840516.0 18 50 6.0 21.70 50981060 19.64 50982060 23.18 50983060 21.05 509840606.0 35 75 6.0 33.11 50981061 33.11 50982061 34.58 50983061 34.58 509840617.0 22 60 7.0 29.95 50981070 26.99 50982070 31.87 50983070 28.68 509840708.0 25 63 8.0 34.47 50981080 30.94 50982080 36.73 50983080 33.05 509840808.0 40 100 8.0 45.88 50981081 45.88 50982081 48.03 50983081 48.03 509840819.0 25 63 9.0 43.73 50981090 39.42 50982090 45.88 50983090 41.11 50984090
10.0 30 72 10.0 46.56 50981100 41.81 50982100 48.48 50983100 43.51 5098410012.0 32 83 12.0 65.88 50981120 59.04 50982120 68.47 50983120 61.31 5098412014.0 32 83 14.0 103.84 50981140 93.08 50982140 112.20 50983140 100.28 5098414016.0 36 92 16.0 142.25 50981160 126.98 50982160 153.55 50983160 137.29 5098416018.0 40 92 18.0 192.31 50981180 171.74 50982180 207.67 50983180 185.59 5098418020.0 45 104 20.0 230.83 50981200 206.21 50982200 249.25 50983200 222.73 50984200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 223
13
Solid carbide cutter for plastics, factory standard - right hand cutting - cross-pitched - Downward chip evacuation - 50 985 ... and 50 987 ... = fine pitch - 50 986 ... and 50 988 ... = medium pitch
l2
Ød2
Ød1
l1
blank blank blank blank
PG V0 PG V0 PG V0 PG V0Article no. Article no. Article no. Article no.
d1 h10 l2 l1 d2 h6 50 985 ... 50 986 ... 50 987 ... 50 988 ...
mm mm mm mm £ £ £ £2.0 7 40 2.0 12.72 50985020 13.91 50986020 12.72 50987020 13.91 509880202.0 7 50 6.0 24.63 50985021 24.63 50986021 24.63 50987021 24.63 509880213.0 10 40 3.0 12.72 50985030 13.91 50986030 12.72 50987030 13.91 509880303.0 12 50 6.0 24.63 50985031 24.63 50986031 24.63 50987031 24.63 509880313.5 12 40 3.5 13.99 50985035 15.48 50986035 13.99 50987035 15.48 509880354.0 15 40 4.0 15.26 50985040 16.95 50986040 15.26 50987040 16.95 509880404.0 20 50 6.0 24.63 50985041 24.63 50986041 24.63 50987041 24.63 509880414.5 15 50 4.5 17.66 50985045 19.55 50986045 17.66 50987045 19.55 509880455.0 16 50 5.0 20.05 50985050 22.26 50986050 20.05 50987050 22.26 509880505.0 25 75 6.0 36.05 50985051 36.05 50986051 36.05 50987051 36.05 509880516.0 18 50 6.0 24.63 50985060 22.19 50986060 24.63 50987060 22.19 509880606.0 35 75 6.0 36.05 50985061 36.05 50986061 36.05 50987061 36.05 509880617.0 22 60 7.0 33.90 50985070 30.37 50986070 33.90 50987070 30.37 509880708.0 25 63 8.0 38.76 50985080 34.74 50986080 38.76 50987080 34.74 509880808.0 40 100 8.0 50.17 50985081 50.17 50986081 50.17 50987081 50.17 509880819.0 25 63 9.0 48.03 50985090 43.08 50986090 48.03 50987090 43.08 50988090
10.0 30 72 10.0 50.61 50985100 45.34 50986100 50.61 50987100 45.34 5098810012.0 32 83 12.0 71.08 50985120 63.56 50986120 71.08 50987120 63.56 5098812014.0 32 83 14.0 114.35 50985140 102.26 50986140 114.35 50987140 102.26 5098814016.0 36 92 16.0 156.37 50985160 139.82 50986160 156.37 50987160 139.82 5098816018.0 40 92 18.0 211.52 50985180 188.83 50986180 211.52 50987180 188.83 5098818020.0 45 104 20.0 254.00 50985200 226.83 50986200 254.00 50987200 226.83 50988200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13 / 224 toolingcenter.com
Solid carbide ball nosed cutter for plastics, factory standard - right hand cutting - cross-pitched
l 2l 1
d1
d2
DIAMOND
PG V0Article no.
d1 h10 l2 l1 d2 h6 50 932 ...
mm mm mm mm £2 7 40 2 42.15 509320202 7 50 6 96.05 509320223 10 40 3 42.15 509320303 12 50 6 96.05 509320324 15 40 4 61.13 509320404 20 50 6 96.05 509320425 16 50 5 77.96 509320505 25 75 6 109.83 509320526 18 50 6 80.68 509320606 35 75 6 105.19 509320628 25 63 8 102.15 509320808 40 100 8 149.04 5093208210 30 72 10 163.05 5093210012 32 83 12 207.11 5093212016 36 92 16 418.16 5093216020 40 104 20 491.04 50932200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 225
Solid carbide cutter for plastics, factory standard - right hand cutting - cross-pitched
l2
Ød2
Ød1
l1
DIAMOND
PG V0Article no.
d1 h10 l2 l1 d2 h6 50 937 ...
mm mm mm mm £5 16 60 6 96.27 509370505 28 75 6 81.46 509370526 20 60 6 96.27 509370606 35 75 6 85.43 509370628 22 63 8 100.56 509370808 40 100 8 103.95 5093708210 25 72 10 123.73 5093710010 50 100 10 173.67 5093710212 30 83 12 217.96 5093712012 50 100 12 255.58 5093712216 35 92 16 384.26 5093716016 60 125 16 466.87 50937162
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13 / 226 toolingcenter.com
Solid carbide cutter for honeycomb materials, factory standard
l2
Ød2
Ød1
l1
Ti 28
PG V0Article no.
d1 h10 l2 l1 d2 h6 50 936 ...
mm mm mm mm £6 16 50 6 55.71 509360068 19 63 8 81.93 5093600810 22 72 10 102.82 5093601012 26 83 12 141.23 5093601214 17 100 12 166.66 5093601416 17 100 12 254.90 5093601620 17 100 12 350.04 5093602024 10 100 12 415.23 5093602424 17 100 12 446.53 5093602544 17 100 12 822.09 50936044 1)
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
1) vertical plunging not possible
Solid carbide right and left hand helix cutter for fibre re-inforced plastics, factory standard
l 2
l 1
d1
d2
Ti 28
PG V0Article no.
d1 h10 l2 l1 d2 h6 Z 50 938 ...
mm mm mm mm £2 6 40 6 2 93.10 509380203 12 40 3 2 45.43 509380303 12 50 6 2 93.10 509380324 14 40 4 2 51.53 509380405 16 50 5 2 64.63 509380506 18 50 6 2 78.87 509380608 20 63 8 2 95.37 5093808010 25 72 10 2 114.23 5093810012 30 83 12 2 165.76 50938120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13
toolingcenter.com 13 / 227
Solid carbide single flute cutter, factory standard - With polished chip flutes
l2
Ød2
Ød1
l1
Right-hand helix Left-hand helixright-hand cutting right-hand cutting
blank blank
PG V0 PG V0Article no. Article no.
d1 h10 l2 l1 d2 h6 Z 50 610 ... 50 611 ...
mm mm mm mm £ £1.5 6 40 3.0 1 19.66 50610015 19.66 506110152.0 6 40 3.0 1 19.66 50610019 19.66 506110192.0 10 40 2.0 1 15.93 50610020 15.93 506110202.0 10 60 6.0 1 29.05 50610022 29.05 506110222.0 12 60 6.0 1 29.95 50610024 29.95 506110242.5 6 40 2.5 1 19.66 50610025 19.66 506110253.0 12 40 3.0 1 15.83 50610030 15.83 506110303.0 10 40 6.0 1 28.59 50610032 28.59 506110323.0 12 60 6.0 1 29.05 50610034 29.05 506110343.0 15 60 6.0 1 29.05 50610036 29.05 506110364.0 15 40 4.0 1 19.32 50610040 19.32 506110404.0 15 60 6.0 1 29.05 50610042 29.05 506110424.0 20 75 6.0 1 47.12 50610044 47.12 506110445.0 16 50 5.0 1 24.69 50610050 24.69 506110505.0 16 60 6.0 1 29.05 50610052 29.05 506110525.0 28 75 6.0 1 52.77 50610054 52.77 506110546.0 20 60 6.0 1 28.84 50610060 28.84 506110606.0 30 60 6.0 1 28.59 50610062 28.59 506110626.0 35 75 6.0 1 42.83 50610064 42.83 506110648.0 22 63 8.0 1 46.74 50610080 46.74 506110808.0 40 100 8.0 1 68.47 50610084 68.47 5061108410.0 25 72 10.0 1 68.91 50610100 68.91 5061110010.0 55 100 10.0 1 114.01 50610105 114.01 5061110512.0 30 83 12.0 1 93.02 50610120 93.02 5061112014.0 30 83 14.0 1 139.17 50610140 139.17 5061114016.0 35 92 16.0 1 197.31 50610160 197.31 5061116018.0 35 92 18.0 1 236.09 50610180 236.09 5061118020.0 40 104 20.0 1 265.51 50610200 265.51 50611200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13 / 228 toolingcenter.com
Solid carbide cutter for plastics, factory standard - with polished flutes
l 2l 1
d1
d2
Ti 40
PG V0Article no.
d1 h10 l2 l1 d2 h6 Z 50 939 ...
mm mm mm mm £3 12 40 3 1 22.37 509390303 10 40 6 1 25.88 509390323 12 60 6 1 47.80 509390343 15 60 6 1 47.80 509390364 15 40 4 1 29.39 509390404 15 60 6 1 47.80 509390424 20 75 6 1 73.68 509390445 16 50 6 1 36.73 509390505 16 60 6 1 47.80 509390525 28 75 6 1 81.80 509390546 20 60 6 1 41.13 509390606 30 60 6 1 47.12 509390626 35 75 6 1 67.57 509390648 22 63 8 1 64.75 509390808 40 100 8 1 106.10 5093908210 25 72 10 1 96.39 5093910010 55 100 10 1 174.57 5093910212 30 83 12 1 125.65 5093912014 30 83 14 1 186.67 5093914016 35 92 16 1 259.53 5093916018 35 92 18 1 308.11 5093918020 40 104 20 1 350.72 50939200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 229
13
Solid carbide cutter for plastics, factory standard - with polished flutes
l 2l 1
d1
d2
Ti 40
PG V0Article no.
d1 h10 l2 l1 d2 h6 Z 50 946 ...
mm mm mm mm £1.5 6 40 3 1 24.30 509460152.0 6 40 3 1 24.30 509460202.0 10 40 2 1 17.41 509460222.0 10 60 6 1 35.37 509460242.0 12 60 6 1 36.27 509460263.0 12 40 3 1 18.31 509460303.0 12 60 6 1 35.37 509460323.0 15 60 6 1 35.37 509460344.0 15 60 6 1 35.37 509460404.0 20 75 6 1 53.45 509460425.0 16 60 6 1 35.37 509460505.0 28 75 6 1 59.10 509460526.0 20 60 6 1 30.75 509460606.0 30 60 6 1 34.92 509460626.0 35 75 6 1 49.16 509460648.0 22 63 8 1 47.69 509460808.0 40 100 8 1 76.60 50946082
10.0 25 72 10 1 70.84 5094610010.0 55 100 10 1 125.53 5094610212.0 30 83 12 1 91.75 50946120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
13 / 230 toolingcenter.com
Solid carbide cutter for plastics, factory standard - with polished flutes
l 2l 1
d1
d2
Ti 28
PG V0Article no.
d1 h10 l2 l1 d2 h6 Z 50 948 ...
mm mm mm mm £2 6 40 6 2 36.84 509480203 12 40 3 2 21.24 509480303 12 50 6 2 36.84 509480314 14 40 6 2 36.84 509480405 16 50 5 2 27.80 509480506 18 50 6 2 33.45 509480608 20 63 8 2 48.25 5094808010 25 72 10 2 63.05 5094810012 30 83 12 2 83.62 50948120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid carbide ball nosed cutter for plastics, DIN 6527 L - with polished flutes - irregular pitch
l 2
l 1
d1
d2
Ti 40
PG V0Article no.
d1 h10 l2 l1 d2 h6 Z 50 947 ...
mm mm mm mm £3 10 57 6 3 50.51 509470304 13 57 6 3 50.51 509470405 15 57 6 3 50.51 509470506 18 57 6 3 43.17 509470607 20 63 8 3 66.77 509470708 20 63 8 3 59.20 509470809 22 72 10 3 90.17 5094709010 25 72 10 3 79.89 5094710012 30 83 12 3 102.93 5094712014 30 83 14 3 157.17 5094714016 35 92 16 3 211.28 5094716018 35 92 18 3 252.30 5094718020 45 104 20 3 298.63 50947200
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid Carbide milling cutters
toolingcenter.com 13 / 231
13
Solid carbide single flute cutter, factory standard
l2
Ød2
Ød1
l1
Left-hand helix Right-hand helixright-hand cutting right-hand cutting
blank blank
PG V1 PG V1Article no. Article no.
d1 h10 l2 l1 d2 h6 Z 52 103 ... 52 104 ...
mm mm mm mm £ £1.5 10 50 3 1 32.99 52103015 32.99 521040152.0 10 50 3 1 32.99 52103020 32.99 521040203.0 12 50 3 1 32.99 52103030 32.99 521040304.0 15 60 4 1 36.73 52103040 36.73 521040405.0 17 60 5 1 40.79 52103050 40.79 521040506.0 20 65 6 1 45.31 52103060 45.31 521040608.0 22 64 8 1 62.49 52103080 62.49 52104080
10.0 30 80 10 1 90.51 52103100 90.51 5210410012.0 35 84 12 1 126.35 52103120 126.35 52104120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 258 ●
Solid carbide slot milling cutter, factory standard
l2
Ød2
Ød1
l1
blank
PG V1Article no.
d1 e8 l2 l1 d2 h6 Z 52 168 ...
mm mm mm mm £2 8 50 3 2 20.18 521680203 12 50 3 2 19.32 521680304 13 60 4 2 20.65 521680405 14 60 5 2 25.03 521680506 16 58 6 2 28.52 521680607 20 65 8 2 38.34 521680708 20 65 8 2 38.80 521680809 22 70 10 2 50.62 52168090
10 22 70 10 2 62.17 5216810012 25 70 12 2 81.86 52168120
Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys hardened materials Vc Page 242-245● ○ ● ○ ○
Solid Carbide milling cutters
13 / 232 toolingcenter.com
Technical references
Full slot milling: When full slot milling, reduce axial depth of cut (ap) and table feed (Vf) by 50 %!
Feed rate adjustment: If the rpm indicated in the tables cannot be obtained by the machine spindle, the feed rate is to be reduced proportionally to the max rpm. Example: according to table = n 50000 1/min. and Vf 1000 mm/min., maximum machine rpm = 40000 1/min. Calculation of feed rate which can be applied: 40000 = 80 % of 50000 1/min. accordingly 80 % of 1000 = 800 mm/min. Feed rate which can be applied = 800 mm/min.
Clamping means: Toolholders with precise radial run-out should be used. e.g. shrink fit, hydraulic chuck or Centro P are very well suited.
Coolant type: WNT recommends the use of the cool air jet 81 900 100. This provides excellent chip removal and prevents chip clogging.
Machine: Use the Micro mills on machines with the highest accuracy and good stability.
Cutting data: The indicated cutting data is dependant upon the machine, workpiece, stability, etc. and may need to be adjusted up or downward to suit.
Ød1
ap
ae
Ød1 a p Ød1
ap
Ød1
ae
a pØd1
ae
a p
page 304
Solid Carbide milling cutters
toolingcenter.com 13 / 233
13
Index Material Strength Material number
Material designation
Material number
Material designation
Material number
Material designation(N/mm² - HB - HRc)
A
1.1 General construction steel < 800 N/mm2 1.0037 St37-2 1.0570 St52-3 1.0060 St60-2
1.2 Free cutting steel < 800 N/mm2 1.0718 9SMnPb28 1.0727 45S20 1.0757 46SPb2
1.3 Hardened steel, non alloyed < 800 N/mm2 1.0401 C15 1.0481 17Mn4 1.1141 C15E (CK15)
1.4 Alloyed hardened steel < 1000 N/mm2 1.7331 16MnCr5 (EC80) 1.7015 13Cr3 (EC60) 1.5919 15CrNi6
1.5 Tempering steel, unalloyed < 850 N/mm2 1.0503 C45 1.1191 Ck45 1.0535 C55
1.6 Tempering steel, unalloyed < 1000 N/mm2 1.0601 C60 1.1221 Ck60 1.0540 C50
1.7 Tempering steel, alloyed < 800 N/mm2 1.5131 50MnSi4 1.7030 28Cr4 1.7225 42CrMo4
1.8 Tempering steel, alloyed < 1300 N/mm2 1.5755 31NiCr14 1.7033 34Cr4 1.3565 48CrMo4
1.9 Steel castings < 850 N/mm2 0.9650 G-X260Cr27 1.6750 GS-20NiCrMo3 7 1.6582 GS-34 CrNiMo 6
1.10 Nitriding steel < 1000 N/mm2 1.8504 34CrAl6 1.8507 34AlMo5 1.8509 41CrAlMo7
1.11 Nitriding steel < 1200 N/mm2 1.8515 31CrMo12 1.8523 39CrMoV19 3 1.8550 34 CrAlNi 7
1.12 Roller bearing steel < 1200 N/mm2 1.3505 100Cr6 (W3) 1.3543 X192CrMo17 1.3520 100 CrMn 6 (W4)
1.13 Spring steel < 1200 N/mm2 1.5026 55Si7 1.7176 55Cr3 1.7701 51CrMoV4
1.14 High-speed steel < 1300 N/mm2 1.3344 S 6-5-3 1.3255 S 18-1-2-5 1.3294 PMHS6-5-3-8; ASP30
1.15 Cold working tool steel < 1300 N/mm2 1.2312 40CrMnMoS8 6 1.2379 X155CrVMo12 1 1.2316 X38CrMo16; RAMAX
1.16 Hot working tool steel < 1300 N/mm2 1.2343 X38CrMoV 5 1 1.2767 X45NiCrMo4 1.2842 90MnCrV8
R
2.1 Steel and sulphured cast stainless steel < 850 N/mm2 1.4305 X8CrNiS18 9 1.4105 X4CrMoS18 1.4107 GX8CrNi12
2.2 Stainless steel, ferritic < 750 N/mm2 1.4510 X3CrTi17 1.4528 X105CrCoMo18 2 1.4016 X6Cr17
2.3 Stainless steel, martensitic < 900 N/mm2 1.4034 X46Cr13 1.4116 X50CrMoV15 1.4106 X2CrMoSiS18-2-1
2.4 stainless steel, ferritic / martensitic <1100 N/mm2 1.4313 X3CrNi13-4 1.4028 X30Cr13 1.4104 X14CrMoS17
2.5 stainless steel, austenitic / ferritic < 850 N/mm2 1.4460 X8CrNiMo27 5 1.4821 X20CrNiSi25 4 1.4462 X2CrNiMoN22-5-3 (Duplex)
2.6 Stainless steel, austenitic < 750 N/mm2 1.4301 X5CrNi18-10 1.4571 X6CrNiMoTi17 12 2 1.4449 X3CrNiMo18-12-3
2.7 Heat resistant < 1100 N/mm2 1.4747 X80CrNiSi20 1.4876 X10NiCrAlTi32-21 1.4825 GX25CrNiSi18-9
F
3.1 Grey cast iron with lamellar graphite 100-350 N/mm2 0.6010 GG10 0.6025 GG25
3.2 Grey cast iron with lamellar graphite 300-1000 N/mm2 0.6030 GG30 0.6045 GG45
3.3 Spheroidal cast iron 300-500 N/mm2 0.7040 GGG40 0.7050 GGG50
3.4 Spheroidal cast iron 550-800 N/mm2 0.7060 GGG60 0.7080 GGG80
3.5 White malleable cast iron 350-450 N/mm2 0.8035 GTW35 0.8045 GTW45
3.6 White malleable cast iron 500-650 N/mm2 0.8055 GTW55 0.8065 GTW65
3.7 Black malleable cast iron 350-450 N/mm2 0.8135 GTS35 0.8145 GTS45
3.8 Black malleable cast iron 500-700 N/mm2 0.8155 GTS55 0.8170 GTS70
N
4.1 Aluminium (non alloyed, low alloyed) < 350 N/mm2 3.0255 Al99,5 3.3308 Al99,9Mg0,5 3.0256 E-Al H
4.2 Aluminium alloys < 0.5% Si < 500 N/mm2 3.0515 AlMn1 3.1355 AlCuMg2 3.3315 AlMg1
4.3 Aluminium alloy 0,5 - 10% Si < 400 N/mm2 3.2152 GD-AlSi6Cu4 3.2373 GD-AlSi9Mg 3.2134 GD-AlSi5Cu1Mg
4.4 Aluminium alloys 10-15% Si < 400 N/mm2 3.2381 G-AlSi10Mg 3.5562 G-MgAl6 3.2525 S-AlSi12
4.5 Aluminum alloys > 15% Si < 400 N/mm2 G-AlSi17Cu4 G-AlSi25CuNiMg G-AlSi21CuNiMg
4.6 Copper (non alloyed, low alloyed) < 350 N/mm2 2.0060 E-Cu57 2.0090 SF-Cu 2.1522 CuSl2Mn
4.7 Copper wrought alloys < 700 N/mm2 2.0240 CuZn15 2.0265 CuZn30 2.0321 CuZn37
4.8 Special copper alloys < 200 HB 2.0916 CuAl5 2.1525 CuSi3Mn Ampco 8-16
4.9 Special copper alloys < 300 HB 2.0978 CuAl11Ni6Fe5 Ampco18-26
4.10 Special copper alloys > 300 HB 2.1247 CuBe2F125 Ampco M-4
4.11 Short-chipping brass, bronze, red bronze < 600 N/mm2 2.0360 CuZn40 (Ms60) 2.0380 CuZn39Pb2 (Ms58) 2.0410 CuZn44Pb2
4.12 Long-chipping brass < 600 N/mm2 2.0335 CuZn36 (Ms63) 2.1293 CuCrZr 2.1080 CuSn6Zn6
4.13 Thermoplastics Delrin, Hostalen Makrolon, Novodur acrylic glass, polystyrol
4.14 Duroplastics Ferrozell, Bakelit Pertinax Resopal
4.15 Fibre-reinforced plastics GFK* CFK** AFK***
4.16 Magnesium and magnesium alloys < 850 N/mm2 3.5200 M2, MgMn2 3.5612 MgAl6Zn1 3.5812 MgAl8Zn1
4.17 Graphite C8000, R8500X R8650 Technograph15
4.18 Tungsten and tungsten alloys W-NiFe (Densimet W) W-Cu80/20 W93NiFe (DENAL)
4.19 Molybdenum and molybdenum alloys Mo , Mo-50Re TZC, TZM MHC , ODS
S
5.1 Pure nickel 1.3911 RNi24 1.3927 RNi8 1.3926 RNi12
5.2 Nickel alloys 1.3912 Ni36 (Invar) 1.3924 Ni54 1.3921 Ni49
5.3 Nickel alloys < 850 N/mm2 2.4360 S-NiCu 30 Fe NiCu 30 Fe Monel 400
5.4 Nickel-chromium alloys 2.4886 SG-NiMo16Cr16W 2.4610 NiMo16Cr16Ti Hastelloy C-276
5.5 Nickel and cobalt alloys < 1300 N/mm2 2.4632 NiCr20Co18Ti 2.4631 NiCr20TiAl Nimonic 80
5.6 Nickel and cobalt alloys < 1300 N/mm2 2.4634 NiCo20Cr15, MoAlTi 2.4654 NiCr19Co14Mo4Ti Waspaloy
5.7 Heat resistant alloys < 1300 N/mm2 Hardox 400 1.4939 X12CrNiMo12 1.4980 X6NiCrTiMoVB25-15-2
5.8 Nickel-cobalt-chromium alloys < 1400 N/mm2 2.4806 SG-NiCr20Nb, Inconel 82 2.4851 NiCr23Fe, Inconel 601 2.4667 SG-NiCr19NbMoTi
5.9 Pure titanium < 900 N/mm2 3.7025 Ti99,8 3.7034 Ti99,7 3.7064 Ti99,5
5.10 Titanium alloys < 700 N/mm2 3.7114 TiAl5Sn2 3.7174 TiAl6V6Sn2 3.7124 TiCu2
5.11 Titanium alloys < 1200 N/mm2 3.7164 TiAl5V4 3.7144 TiAl6Sn2Zr4Mo2 3.7154 TiAl6Zr5
H
6.1
Tempered steel
< 45 HRc
6.2 46-55HRc
6.3 56-60 HRc
6.4 61-65 HRc
6.5 65-70 HRc
* Glass fibre reinforced **Carbon fibre reinforced ***Aramid fibre reinforced
Material examples referring to the WNT cutting data tables
Solid Carbide milling cutters
13 / 234 toolingcenter.com
Ø d1 = 0,2 mm Ø d1 = 0,5 mm Ø d1 = 0,8 mm
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1
ap max 0,02 0,02 0,02 0,01 0,01 0,1 0,1 0,1 0,1 0,05 ap max 0,2 0,2 0,2 0,2 0,12
nmin 30000 12000 nmin 8000
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.2 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.3 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.4 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.5 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.6 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.7 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.8 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.9 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.10 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.11 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.12 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.13 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.14 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2101.15 50.000 232 202 174 144 116 274 238 205 170 137 50.000 485 422 364 301 2421.16 50.000 201 175 151 125 101 237 206 178 147 119 50.000 420 365 315 260 2102.1 50.000 232 202 174 144 116 219 191 164 136 110 38.000 346 301 260 215 1732.2 50.000 232 202 174 144 116 219 191 164 136 110 38.000 346 301 260 215 1732.3 50.000 232 202 174 144 116 219 191 164 136 110 38.000 346 301 260 215 1732.4 50.000 232 202 174 144 116 219 191 164 136 110 32.000 346 301 260 215 1732.5 50.000 232 202 174 144 116 219 191 164 136 110 38.000 346 301 260 215 1732.6 50.000 232 202 174 144 116 219 191 164 136 110 38.000 346 301 260 215 1732.7 50.000 232 202 174 144 116 219 191 164 136 110 25.000 312 271 234 193 1563.1 50.000 232 202 174 144 116 219 191 164 136 110 50.000 485 422 364 301 2423.2 50.000 232 202 174 144 116 219 191 164 136 110 50.000 485 422 364 301 2423.3 50.000 232 202 174 144 116 219 191 164 136 110 50.000 485 422 364 301 2423.4 50.000 232 202 174 144 116 219 191 164 136 110 50.000 485 422 364 301 2423.5 50.000 141 123 106 88 71 175 152 131 109 88 32.000 285 248 213 176 1423.6 50.000 141 123 106 88 71 175 152 131 109 88 32.000 285 248 213 176 1423.7 50.000 141 123 106 88 71 175 152 131 109 88 32.000 285 248 213 176 1423.8 50.000 141 123 106 88 71 175 152 131 109 88 32.000 285 248 213 176 1424.1 50.000 232 202 174 144 116 274 238 205 170 137 50.000 582 506 436 361 2914.2 50.000 232 202 174 144 116 274 238 205 170 137 50.000 582 506 436 361 2914.34.44.54.6 50.000 232 202 174 144 116 274 238 205 170 137 50.000 582 506 436 361 2914.7 50.000 232 202 174 144 116 274 238 205 170 137 44.000 485 422 364 301 2424.8 50.000 126 110 95 78 63 134 117 101 83 67 25.000 170 148 127 105 854.9 50.000 126 110 95 78 63 107 93 80 67 54 19.000 147 128 110 91 744.10 50.000 126 110 95 78 63 112 97 84 69 56 19.000 158 138 119 98 794.11 50.000 232 202 174 144 116 274 238 205 170 137 44.000 485 422 364 301 2424.12 50.000 232 202 174 144 116 274 238 205 170 137 44.000 485 422 364 301 2424.13 50.000 232 202 174 144 116 274 238 205 170 137 50.000 582 506 436 361 2914.14 50.000 232 202 174 144 116 274 238 205 170 137 50.000 582 506 436 361 2914.15 50.000 212 185 159 132 106 200 174 150 124 100 38.000 316 275 237 196 1584.16 50.000 212 185 159 132 106 250 218 188 155 125 50.000 531 462 398 329 2664.174.18 50.000 141 123 106 88 71 150 131 113 93 75 31.000 221 193 166 137 1114.195.1 50.000 72 62 54 44 36 89 77 66 55 44 25.000 102 89 76 63 515.2 50.000 72 62 54 44 36 89 77 66 55 44 25.000 102 89 76 63 515.3 50.000 72 62 54 44 36 89 77 66 55 44 25.000 91 79 68 56 455.4 50.000 54 47 41 34 27 66 57 49 41 33 12.000 78 68 59 49 395.5 50.000 54 47 41 34 27 66 57 49 41 33 12.000 78 68 59 49 395.6 50.000 63 54 47 39 31 76 66 57 47 38 19.000 91 79 68 56 455.7 50.000 46 40 35 29 23 55 48 41 34 27 19.000 69 60 51 43 345.8 50.000 46 40 35 29 23 55 48 41 34 27 19.000 78 68 59 49 395.9 50.000 114 99 85 71 57 164 143 123 102 82 44.000 114 99 85 71 575.10 50.000 114 99 85 71 57 164 143 123 102 82 44.000 164 143 123 102 825.11 50.000 70 61 53 43 35 85 74 64 53 42 38.000 101 88 76 63 516.1 50.000 219 191 164 136 110 232 202 174 144 116 50.000 388 338 291 241 1946.2 50.000 201 175 151 125 101 285 248 213 176 142 38.000 336 292 252 208 1686.3 50.000 114 99 85 71 57 134 117 101 83 67 25.000 156 136 117 97 786.4 50.000 107 93 80 67 54 126 110 95 78 63 25.000 141 123 106 88 716.5
Cutting data values for micro and mini carbide end mills 2.2xD
Solid Carbide milling cutters
toolingcenter.com 13 / 235
13
Ø d1 = 1,0 mm Ø d1 = 1,5 mm1st choice suitable
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1
Emul
sion
Com
pres
sed
air
MM
S
ap max 0,3 0,3 0,3 0,3 0,2 ap max 0,45 0,45 0,45 0,45 0,3
nmin 6500 nmin 6500
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.2 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.3 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.4 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.5 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.6 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.7 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.8 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.9 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �
1.10 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.11 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.12 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.13 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.14 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �1.15 50.000 775 674 581 480 387 33.000 1200 1044 900 744 600 � �1.16 50.000 671 584 503 416 335 33.000 1039 904 779 644 520 � �2.1 38.000 589 512 442 365 294 25.000 850 740 638 527 425 � �2.2 38.000 589 512 442 365 294 25.000 850 740 638 527 425 � �2.3 38.000 589 512 442 365 294 25.000 850 740 638 527 425 � �2.4 32.000 496 431 372 307 248 21.000 760 661 570 471 380 � �2.5 38.000 589 512 442 365 294 25.000 850 740 638 527 425 � �2.6 38.000 589 512 442 365 294 25.000 850 740 638 527 425 � �2.7 25.000 465 404 349 288 232 16.000 640 557 480 397 320 � �3.1 50.000 775 674 581 480 387 38.000 1200 1044 900 744 600 � �3.2 50.000 775 674 581 480 387 38.000 1200 1044 900 744 600 � �3.3 50.000 775 674 581 480 387 38.000 1200 1044 900 744 600 � �3.4 50.000 775 674 581 480 387 38.000 1200 1044 900 744 600 � �3.5 32.000 389 338 292 241 194 21.000 548 477 411 340 274 � �3.6 32.000 389 338 292 241 194 21.000 548 477 411 340 274 � �3.7 32.000 389 338 292 241 194 21.000 548 477 411 340 274 � �3.8 32.000 389 338 292 241 194 21.000 548 477 411 340 274 � �4.1 50.000 930 809 697 576 465 50.000 1500 1305 1125 930 750 � �4.2 50.000 930 809 697 576 465 50.000 1500 1305 1125 930 750 � �4.34.44.54.6 50.000 930 809 697 576 465 38.000 1400 1218 1050 868 700 � �4.7 44.000 775 674 581 480 387 29.000 1160 1009 870 719 580 � �4.8 25.000 266 231 199 165 133 16.000 392 341 294 243 196 � �4.9 19.000 202 176 152 125 101 12.000 286 249 214 177 143 � �
4.10 19.000 202 176 152 125 101 12.000 286 249 214 177 143 � �4.11 44.000 775 674 581 480 387 29.000 1160 1009 870 719 580 � �4.12 44.000 775 674 581 480 387 29.000 1160 1009 870 719 580 � �4.13 50.000 930 809 697 576 465 33.000 1320 1148 990 818 660 � �4.14 50.000 930 809 697 576 465 38.000 1520 1322 1140 942 760 � �4.15 38.000 495 431 371 307 247 25.000 685 596 513 424 342 � �4.16 50.000 849 738 636 526 424 38.000 1388 1207 1041 860 694 � �4.174.18 31.000 354 308 265 219 177 21.000 529 461 397 328 265 � �4.195.1 25.000 152 132 114 94 76 16.000 294 256 220 182 147 � �5.2 25.000 152 132 114 94 76 16.000 294 256 220 182 147 � �5.3 25.000 152 132 114 94 76 16.000 294 256 220 182 147 � �5.4 12.000 110 95 82 68 55 8.000 170 148 127 105 85 � �5.5 12.000 131 114 99 82 66 8.000 255 221 191 158 127 � �5.6 19.000 152 132 114 94 76 12.000 294 256 220 182 147 � �5.7 19.000 99 86 74 61 49 12.000 170 148 127 105 85 � �5.8 19.000 131 114 99 82 66 12.000 255 221 191 158 127 � �5.9 44.000 170 148 127 105 85 29.000 329 286 246 204 164 � �
5.10 44.000 247 215 186 153 124 29.000 365 318 274 226 183 � �5.11 38.000 170 148 127 105 85 25.000 329 286 246 204 164 � �6.1 50.000 620 539 465 384 310 33.000 850 740 638 527 425 �6.2 38.000 537 467 402 333 268 25.000 779 678 585 483 390 �6.3 25.000 235 204 176 146 117 16.000 346 301 260 215 173 �6.4 25.000 221 193 166 137 111 16.000 327 284 245 202 163 �6.5
Solid Carbide milling cutters
13 / 236 toolingcenter.com
Ø d1 = 1,8 mm Ø d1 = 2,0 mm1st choice suitable
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1
Emul
sion
Com
pres
sed
air
MM
S
ap max 0,54 0,54 0,54 0,54 0,36 ap max 0,6 0,6 0,6 0,6 0,4
nmin 5500 nmin 5000
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.2 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.3 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.4 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.5 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.6 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.7 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.8 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.9 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.10 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.11 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.12 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.13 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.14 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.15 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �1.16 29.000 1300 1131 975 806 650 25.000 1500 1300 1125 930 750 � �2.1 22.000 950 827 713 589 475 19.000 1140 990 855 700 570 � �2.2 22.000 950 827 713 589 475 19.000 1140 990 855 700 570 � �2.3 22.000 950 827 713 589 475 19.000 1140 990 855 700 570 � �2.4 18.000 800 696 600 496 400 15.000 840 730 630 520 420 � �2.5 22.000 950 827 713 589 475 19.000 1140 990 855 700 570 � �2.6 22.000 950 827 713 589 475 19.000 1140 990 855 700 570 � �2.7 14.000 680 592 510 422 340 12.000 720 620 540 450 360 � �3.1 32.000 1400 1218 1050 868 700 25.000 1500 1300 1125 930 750 � �3.2 32.000 1400 1218 1050 868 700 25.000 1500 1300 1125 930 750 � �3.3 32.000 1400 1218 1050 868 700 25.000 1500 1300 1125 930 750 � �3.4 32.000 1400 1218 1050 868 700 25.000 1500 1300 1125 930 750 � �3.5 18.000 630 548 473 391 315 25.000 1500 1300 1125 930 750 � �3.6 18.000 630 548 473 391 315 25.000 1500 1300 1125 930 750 � �3.7 18.000 630 548 473 391 315 25.000 1500 1300 1125 930 750 � �3.8 18.000 630 548 473 391 315 25.000 1500 1300 1125 930 750 � �4.1 44.000 1800 1566 1350 1116 900 25.000 1500 1300 1125 930 750 � �4.2 44.000 1800 1566 1350 1116 900 25.000 1500 1300 1125 930 750 � �4.34.44.54.6 32.000 1520 1322 1140 942 760 25.000 1500 1300 1125 930 750 � �4.7 25.000 1250 1088 938 775 625 25.000 1500 1300 1125 930 750 � �4.8 14.000 500 435 375 310 250 25.000 1500 1300 1125 930 750 � �4.9 10.000 370 322 278 229 185 19.000 1140 990 855 700 570 � �4.10 10.000 370 322 278 229 185 19.000 1140 990 855 700 570 � �4.11 25.000 1250 1088 938 775 625 19.000 1140 990 855 700 570 � �4.12 25.000 1250 1088 938 775 625 15.000 840 730 630 520 420 � �4.13 28.000 1400 1218 1050 868 700 19.000 1140 990 855 700 570 � �4.14 33.000 1560 1357 1170 967 780 19.000 1140 990 855 700 570 � �4.15 22.000 800 696 600 496 400 12.000 720 630 540 450 360 � �4.16 33.000 1560 1357 1170 967 780 25.000 1500 1300 1125 930 750 � �4.174.18 29.000 300 261 225 186 150 25.000 1500 1300 1125 930 750 � �4.195.1 14.000 400 348 300 248 200 25.000 1500 1300 1125 930 750 � �5.2 14.000 400 348 300 248 200 25.000 1500 1300 1125 930 750 � �5.3 14.000 420 365 315 260 210 25.000 1500 1300 1125 930 750 � �5.4 7.000 250 218 188 155 125 25.000 1500 1300 1125 930 750 � �5.5 7.000 370 322 278 229 185 25.000 1500 1300 1125 930 750 � �5.6 10.000 370 322 278 229 185 25.000 1500 1300 1125 930 750 � �5.7 10.000 280 244 210 174 140 25.000 1500 1300 1125 930 750 � �5.8 10.000 370 322 278 229 185 25.000 1500 1300 1125 930 750 � �5.9 25.000 400 348 300 248 200 25.000 1500 1300 1125 930 750 � �5.10 25.000 480 418 360 298 240 25.000 1500 1300 1125 930 750 � �5.11 22.000 380 331 285 236 190 25.000 1500 1300 1125 930 750 � �6.1 29.000 1200 1044 900 744 600 25.000 1500 1300 1125 930 750 �6.2 22.000 1000 870 750 620 500 19.000 1140 990 855 700 570 �6.3 14.000 420 365 315 260 210 19.000 1140 990 855 700 570 �6.4 14.000 420 365 315 260 210 19.000 1140 990 855 700 570 �6.5
Cutting data values for micro and mini carbide end mills 2.2xD
Solid Carbide milling cutters
toolingcenter.com 13 / 237
13
Ø d1 = 0,2 mm Ø d1 = 0,5 mm Ø d1 = 0,8 mm
ae=0
.6-1
.0 x
d1:
Whe
re th
ere
are
no v
alue
s on
ly tr
ocho
dial
slo
tting
and
edg
e m
illing
is re
com
men
ded.
Oth
erw
ise
ther
e is
the
risk
of to
ol b
reak
age.
1st choice suitableae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1
Emul
sion
Com
pres
sed
air
MM
S
ap max 0,012 0,012 0,012 0,012 0,06 0,06 0,06 0,06 ap max 0,12 0,12 0,12 0,12 0,064
nmin 30000 12000 nmin 8000
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.2 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.3 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.4 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.5 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.6 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.7 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.8 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.9 50.000 232 202 174 144 50.000 274 238 205 170 31.000 381 332 286 236 191 � �
1.10 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.11 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.12 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.13 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.14 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �1.15 50.000 232 202 174 144 50.000 274 238 205 170 44.000 485 422 364 301 242 � �1.16 50.000 201 175 151 125 50.000 237 206 178 147 31.000 330 287 248 205 165 � �2.1 50.000 232 202 174 144 50.000 219 191 164 136 31.000 346 301 260 215 173 � �2.2 50.000 232 202 174 144 50.000 219 191 164 136 31.000 346 301 260 215 173 � �2.3 50.000 232 202 174 144 50.000 219 191 164 136 31.000 346 301 260 215 173 � �2.4 50.000 232 202 174 144 50.000 219 191 164 136 31.000 346 301 260 215 173 � �2.5 50.000 232 202 174 144 50.000 219 191 164 136 31.000 346 301 260 215 173 � �2.6 50.000 232 202 174 144 50.000 219 191 164 136 31.000 346 301 260 215 173 � �2.7 50.000 232 202 174 144 38.000 192 167 144 119 19.000 263 229 197 163 132 � �3.1 50.000 232 202 174 144 50.000 219 191 164 136 50.000 416 362 312 258 208 � �3.2 50.000 232 202 174 144 50.000 219 191 164 136 50.000 416 362 312 258 208 � �3.3 50.000 232 202 174 144 50.000 219 191 164 136 50.000 416 362 312 258 208 � �3.4 50.000 232 202 174 144 50.000 219 191 164 136 50.000 416 362 312 258 208 � �3.5 50.000 141 123 106 88 50.000 175 152 131 109 25.000 240 209 180 149 120 � �3.6 50.000 141 123 106 88 50.000 175 152 131 109 25.000 240 209 180 149 120 � �3.7 50.000 141 123 106 88 50.000 175 152 131 109 25.000 240 209 180 149 120 � �3.8 50.000 141 123 106 88 50.000 175 152 131 109 25.000 240 209 180 149 120 � �4.1 50.000 232 202 174 144 50.000 274 238 205 170 50.000 554 482 416 344 277 � �4.2 50.000 232 202 174 144 50.000 274 238 205 170 50.000 554 482 416 344 277 � �4.34.44.54.6 50.000 232 202 174 144 50.000 274 238 205 170 50.000 554 482 416 344 277 � �4.7 50.000 232 202 174 144 50.000 274 238 205 170 38.000 554 482 416 344 277 � �4.8 50.000 126 110 95 78 44.000 134 117 101 83 22.000 204 177 153 126 102 � �4.9 50.000 126 110 95 78 31.000 112 97 84 69 15.000 170 148 127 105 85 � �
4.10 50.000 126 110 95 78 31.000 112 97 84 69 15.000 170 148 127 105 85 � �4.11 50.000 232 202 174 144 50.000 274 238 205 170 38.000 485 422 364 301 242 � �4.12 50.000 232 202 174 144 50.000 274 238 205 170 38.000 485 422 364 301 242 � �4.13 50.000 232 202 174 144 50.000 274 238 205 170 44.000 554 482 416 344 277 � �4.14 50.000 232 202 174 144 50.000 274 238 205 170 50.000 554 482 416 344 277 � �4.15 50.000 141 123 106 88 50.000 200 174 150 124 31.000 316 275 237 196 158 � �4.16 50.000 212 185 159 132 50.000 250 218 188 155 50.000 506 440 379 314 253 � �4.174.18 50.000 141 123 106 88 50.000 150 131 113 93 25.000 253 220 190 157 126 � �4.195.1 50.000 63 54 47 39 44.000 76 66 57 47 22.000 91 79 68 56 45 � �5.2 50.000 63 54 47 39 44.000 76 66 57 47 22.000 91 79 68 56 45 � �5.3 50.000 63 54 47 39 44.000 76 66 57 47 22.000 91 79 68 56 45 � �5.4 50.000 46 40 35 29 25.000 55 48 41 34 12.000 88 77 66 55 44 � �5.5 50.000 46 40 35 29 25.000 55 48 41 34 12.000 78 68 59 49 39 � �5.6 50.000 54 47 40 33 31.000 63 55 47 39 15.000 91 79 68 56 45 � �5.7 50.000 55 48 41 32 31.000 58 51 44 36 15.000 98 85 73 61 49 � �5.8 50.000 55 47 40 32 31.000 58 51 44 36 15.000 98 85 73 61 49 � �5.9 50.000 60 61 48 41 50.000 71 62 53 44 38.000 114 99 85 71 57 � �
5.10 50.000 60 61 48 41 50.000 71 62 53 44 38.000 126 110 95 78 63 � �5.11 50.000 60 52 45 37 50.000 71 62 49 39 31.000 89 77 66 55 44 � �6.1 50.000 155 135 116 96 50.000 164 143 123 102 44.000 346 301 260 215 173 �6.2 50.000 95 83 71 59 50.000 134 117 101 83 31.000 180 157 135 112 90 �6.3 50.000 95 83 71 59 44.000 134 117 101 83 22.000 180 157 135 112 90 �6.4 50.000 89 78 67 55 44.000 126 110 95 78 22.000 170 148 127 105 85 �6.5
Cutting data values for micro and mini carbide end mills 5xD
Solid Carbide milling cutters
13 / 238 toolingcenter.com
Cutting data values for micro and mini carbide end mills 5xD
Ø d1= 1,0 mm Ø d1= 1,5 mm
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1
ap max 0,3 0,3 0,3 0,3 0,2 ap max 0,3 0,3 0,3 0,3 0,2
nmin 6500 nmin 6500
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.2 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.3 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.4 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.5 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.6 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.7 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.8 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.9 31.000 480 418 360 298 240 21.000 800 696 600 496 4001.10 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.11 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.12 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.13 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.14 31.000 416 362 312 258 208 21.000 693 603 520 430 3461.15 44.000 682 593 511 423 341 29.000 1160 1009 870 719 5801.16 31.000 416 362 312 258 208 21.000 693 603 520 430 3462.1 31.000 480 418 360 298 240 21.000 800 696 600 496 4002.2 31.000 480 418 360 298 240 21.000 800 696 600 496 4002.3 31.000 480 418 360 298 240 21.000 800 696 600 496 4002.4 31.000 480 418 360 298 240 21.000 800 696 600 496 4002.5 31.000 480 418 360 298 240 21.000 800 696 600 496 4002.6 31.000 480 418 360 298 240 21.000 800 696 600 496 4002.7 19.000 310 270 232 192 155 12.000 480 418 360 298 2403.1 50.000 620 539 465 384 310 33.000 1000 870 750 620 5003.2 50.000 620 539 465 384 310 33.000 1000 870 750 620 5003.3 50.000 620 539 465 384 310 33.000 1000 870 750 620 5003.4 50.000 620 539 465 384 310 33.000 1000 870 750 620 5003.5 25.000 297 258 223 184 148 16.000 411 357 308 255 2053.6 25.000 297 258 223 184 148 16.000 411 357 308 255 2053.7 25.000 297 258 223 184 148 16.000 411 357 308 255 2053.8 25.000 297 258 223 184 148 16.000 411 357 308 255 2054.1 50.000 775 674 581 480 387 42.000 1200 1044 900 744 6004.2 50.000 775 674 581 480 387 42.000 1200 1044 900 744 6004.34.44.54.6 50.000 930 809 697 576 465 33.000 1320 1148 990 818 6604.7 38.000 705 613 529 437 352 25.000 1000 870 750 620 5004.8 22.000 278 242 209 173 139 14.000 343 298 257 213 1714.9 15.000 190 165 142 118 95 10.000 245 213 184 152 1224.10 15.000 190 165 142 118 95 10.000 245 213 184 152 1224.11 38.000 697 607 523 432 349 25.000 1000 870 750 620 5004.12 38.000 697 607 523 432 349 25.000 1000 870 750 620 5004.13 44.000 813 708 610 504 407 29.000 1160 1009 870 719 5804.14 50.000 930 809 697 576 465 33.000 1320 1148 990 818 6604.15 31.000 438 381 329 272 219 21.000 575 500 431 357 2884.16 50.000 849 738 636 526 424 33.000 1205 1048 904 747 6024.174.18 25.000 318 277 239 197 159 16.000 438 381 329 272 2194.195.1 22.000 114 99 85 71 57 14.000 196 170 147 121 985.2 22.000 114 99 85 71 57 14.000 196 170 147 121 985.3 22.000 114 99 85 71 57 14.000 196 170 147 121 985.4 12.000 110 95 82 68 55 8.000 170 148 127 105 855.5 12.000 131 114 99 82 66 8.000 170 148 127 105 855.6 15.000 152 132 114 94 76 10.000 245 213 184 152 1225.7 15.000 120 105 90 75 60 10.000 184 160 138 114 925.8 15.000 120 105 90 75 60 10.000 184 160 138 114 925.9 38.000 156 135 117 96 78 25.000 274 238 205 170 1375.10 38.000 212 185 159 132 106 25.000 365 318 274 226 1835.11 31.000 127 111 95 79 64 21.000 201 175 151 125 1006.1 44.000 426 371 320 264 213 29.000 600 522 450 372 3006.2 31.000 201 175 151 125 101 21.000 346 301 260 215 1736.3 22.000 235 204 176 146 117 14.000 346 301 260 215 1736.4 22.000 221 193 166 137 111 14.000 327 284 245 202 1636.5
Solid Carbide milling cutters
toolingcenter.com 13 / 239
13
Ø d1= 1,8 mm Ø d1= 2,0 mm1st choice suitable
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 - 1,0 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,6 -
1,0 x d1
Emul
sion
Com
pres
sed
air
MM
S
ap max 0,54 0,54 0,54 0,54 0,36 ap max 0,6 0,6 0,6 0,6 0,4
nmin 5500 nmin 5000
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.2 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.3 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.4 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.5 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.6 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.7 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.8 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.9 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.10 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.11 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.12 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.13 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.14 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �1.15 25.000 1250 1088 938 775 625 22.000 1320 1148 990 818 660 � �1.16 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.1 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.2 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.3 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.4 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.5 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.6 18.000 850 740 638 527 425 15.000 900 783 675 558 450 � �2.7 10.000 500 435 375 310 250 9.000 540 470 405 335 270 � �3.1 28.000 1320 1148 990 818 660 25.000 1500 1305 1125 930 750 � �3.2 28.000 1320 1148 990 818 660 25.000 1500 1305 1125 930 750 � �3.3 28.000 1320 1148 990 818 660 25.000 1500 1305 1125 930 750 � �3.4 28.000 1320 1148 990 818 660 25.000 1500 1305 1125 930 750 � �3.5 14.000 480 418 360 298 240 12.000 520 452 390 322 260 � �3.6 14.000 480 418 360 298 240 12.000 520 452 390 322 260 � �3.7 14.000 480 418 360 298 240 12.000 520 452 390 322 260 � �3.8 14.000 480 418 360 298 240 12.000 520 452 390 322 260 � �4.1 36.000 1500 1305 1125 930 750 31.000 1860 1618 1395 1153 930 � �4.2 36.000 1500 1305 1125 930 750 31.000 1860 1618 1395 1153 930 � �4.34.44.54.6 28.000 1400 1218 1050 868 700 25.000 1500 1305 1125 930 750 � �4.7 22.000 1080 940 810 670 540 19.000 1140 992 855 707 570 � �4.8 12.000 450 392 338 279 225 11.000 480 418 360 298 240 � �4.9 8.000 300 261 225 186 150 7.000 300 261 225 186 150 � �4.10 8.000 300 261 225 186 150 7.000 300 261 225 186 150 � �4.11 22.000 1100 957 825 682 550 19.000 1140 992 855 707 570 � �4.12 22.000 1100 957 825 682 550 19.000 1140 992 855 707 570 � �4.13 25.000 1200 1044 900 744 600 22.000 1320 1148 990 818 660 � �4.14 28.000 1400 1218 1050 868 700 25.000 1500 1305 1125 930 750 � �4.15 18.000 650 566 488 403 325 15.000 660 574 495 409 330 � �4.16 28.000 1400 1218 1050 868 700 25.000 1500 1305 1125 930 750 � �4.174.18 14.000 500 435 375 310 250 12.000 520 452 390 322 260 � �4.195.1 12.000 300 261 225 186 150 11.000 400 348 300 248 200 � �5.2 12.000 300 261 225 186 150 11.000 400 348 300 248 200 � �5.3 12.000 300 261 225 186 150 11.000 400 348 300 248 200 � �5.4 7.000 240 209 180 149 120 6.000 260 226 195 161 130 � �5.5 7.000 240 209 180 149 120 6.000 260 226 195 161 130 � �5.6 8.000 300 261 225 186 150 7.000 300 261 225 186 150 � �5.7 8.000 280 244 210 174 140 7.000 300 261 225 186 150 � �5.8 8.000 280 244 210 174 140 7.000 300 261 225 186 150 � �5.9 22.000 380 331 285 236 190 19.000 420 365 315 260 210 � �5.10 22.000 450 392 338 279 225 19.000 500 435 375 310 250 � �5.11 18.000 300 261 225 186 150 15.000 400 348 300 248 200 � �6.1 25.000 800 696 600 496 400 22.000 1000 870 750 620 500 �6.2 16.000 500 435 375 310 250 15.000 500 435 375 310 250 �6.3 12.000 450 392 338 279 225 11.000 480 418 360 298 240 �6.4 12.000 450 392 338 279 225 11.000 480 418 360 298 240 �6.5
Solid Carbide milling cutters
13 / 240 toolingcenter.com
Ø d1 = 0,2 mm Ø d1 = 0,5 mm Ø d1 = 0,8 mm Ø d1 = 1,0 mm
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1
ap max 0,006 0,006 0,006 0,006 0,015 0,015 0,015 0,015 ap max 0,024 0,024 0,024 0,024 0,03 0,03 0,03 0,03
nmin 30000 12000 nmin 8000 6500
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 50.000 232 202 174 144 274 238 205 170 38.000 450 392 338 279 589 512 442 3651.2 50.000 232 202 174 144 274 238 205 170 38.000 450 392 338 279 589 512 442 3651.3 50.000 232 202 174 144 274 238 205 170 38.000 450 392 338 279 589 512 442 3651.4 50.000 232 202 174 144 274 238 205 170 38.000 450 392 338 279 589 512 442 3651.5 50.000 232 202 174 144 274 238 205 170 38.000 450 392 338 279 589 512 442 3651.6 50.000 201 175 151 125 190 165 142 118 25.000 300 261 225 186 335 292 252 2081.7 50.000 232 202 174 144 219 191 164 136 38.000 450 392 338 279 589 512 442 3651.8 50.000 201 175 151 125 190 165 142 118 25.000 300 261 225 186 335 292 252 2081.9 50.000 232 202 174 144 219 191 164 136 38.000 450 392 338 279 589 512 442 3651.10 50.000 201 175 151 125 190 165 142 118 25.000 270 235 203 167 335 292 252 2081.11 50.000 201 175 151 125 190 165 142 118 25.000 270 235 203 167 335 292 252 2081.12 50.000 201 175 151 125 190 165 142 118 25.000 270 235 203 167 335 292 252 2081.13 50.000 201 175 151 125 190 165 142 118 25.000 270 235 203 167 335 292 252 2081.14 50.000 201 175 151 125 190 165 142 118 25.000 270 235 203 167 335 292 252 2081.15 50.000 232 202 174 144 219 191 164 136 38.000 450 392 338 279 589 512 442 3651.16 50.000 201 175 151 125 190 165 142 118 25.000 270 235 203 167 335 292 252 2082.1 50.000 155 135 116 96 208 181 156 129 25.000 312 271 234 193 387 337 290 2402.2 50.000 155 135 116 96 208 181 156 129 25.000 312 271 234 193 387 337 290 2402.3 50.000 155 135 116 96 208 181 156 129 25.000 312 271 234 193 387 337 290 2402.4 50.000 155 135 116 96 164 143 123 102 19.000 242 211 182 150 294 256 221 1822.5 50.000 155 135 116 96 219 191 164 136 25.000 312 271 234 193 387 337 290 2402.6 50.000 155 135 116 96 219 191 164 136 25.000 312 271 234 193 387 337 290 2402.7 50.000 155 135 116 96 170 148 127 105 15.000 236 205 177 146 279 243 209 1733.1 50.000 232 202 174 144 274 238 205 170 44.000 485 422 364 301 682 593 511 4233.2 50.000 232 202 174 144 274 238 205 170 44.000 485 422 364 301 682 593 511 4233.3 50.000 232 202 174 144 274 238 205 170 44.000 485 422 364 301 682 593 511 4233.4 50.000 232 202 174 144 274 238 205 170 44.000 485 422 364 301 682 593 511 4233.5 50.000 141 123 106 88 150 131 113 93 19.000 215 187 161 133 269 234 202 1673.6 50.000 141 123 106 88 150 131 113 93 19.000 215 187 161 133 269 234 202 1673.7 50.000 141 123 106 88 150 131 113 93 19.000 215 187 161 133 269 234 202 1673.8 50.000 141 123 106 88 150 131 113 93 19.000 215 187 161 133 269 234 202 1674.1 50.000 232 202 174 144 438 381 329 272 50.000 693 603 520 430 930 809 697 5764.2 50.000 232 202 174 144 438 381 329 272 50.000 693 603 520 430 930 809 697 5764.34.44.54.6 50.000 232 202 174 144 274 238 205 170 44.000 416 362 312 258 542 472 407 3364.7 50.000 232 202 174 144 274 238 205 170 31.000 402 350 301 249 480 418 360 2984.8 50.000 126 110 95 78 134 117 101 83 19.000 170 148 127 105 190 165 142 1184.9 50.000 126 110 95 78 89 78 67 55 12.000 136 118 102 84 152 132 114 944.10 50.000 126 110 95 78 89 78 67 55 12.000 136 118 102 84 152 132 114 944.11 50.000 232 202 174 144 274 238 205 170 31.000 402 350 301 249 480 418 360 2984.12 50.000 232 202 174 144 274 238 205 170 31.000 402 350 301 249 480 418 360 2984.13 50.000 232 202 174 144 329 286 246 204 38.000 554 482 416 344 705 613 529 4374.14 50.000 232 202 174 144 329 286 246 204 44.000 554 482 416 344 813 708 610 5044.15 50.000 141 123 106 88 200 174 150 124 25.000 285 248 213 176 339 295 255 2104.16 50.000 212 185 159 132 300 261 225 186 44.000 506 440 379 314 742 646 557 4604.174.18 50.000 141 123 106 88 150 131 113 93 19.000 215 187 161 133 255 221 191 1584.195.1 50.000 54 47 40 33 63 55 47 39 19.000 79 69 59 49 101 88 76 635.2 50.000 54 47 40 33 63 55 47 39 19.000 91 79 68 56 114 99 85 715.3 50.000 54 47 40 33 63 55 47 39 19.000 102 89 76 63 126 110 95 785.4 50.000 46 40 35 29 55 48 41 34 12.000 88 77 66 55 110 95 82 685.5 50.000 46 40 35 29 55 48 41 34 12.000 59 51 44 36 82 71 62 515.6 50.000 54 47 40 33 63 55 47 39 12.000 79 69 59 49 101 88 76 635.7 50.000 46 40 35 29 55 48 41 34 12.000 69 60 51 43 88 76 66 545.8 50.000 46 40 35 29 55 48 41 34 12.000 69 60 51 43 88 76 66 545.9 50.000 60 52 45 37 71 62 53 44 31.000 101 88 76 63 141 123 106 885.10 50.000 60 52 45 37 71 62 53 44 31.000 101 88 76 63 177 154 133 1105.11 50.000 60 52 45 37 71 62 53 44 25.000 89 77 66 55 141 123 106 886.1 50.000 77 67 58 48 82 71 62 51 38.000 173 151 130 107 194 168 145 1206.2 50.000 47 41 36 29 67 58 50 42 25.000 90 78 68 56 101 88 75 626.3 50.000 47 41 36 29 67 58 50 42 19.000 90 78 68 56 101 88 75 626.4 50.000 45 39 34 28 63 55 47 39 19.000 85 74 64 53 95 83 71 596.5
Cutting data values for micro and mini carbide end mills 10xD
Solid Carbide milling cutters
toolingcenter.com 13 / 241
13
Ø d1 = 1,5 mm Ø d1 = 1,8 mm Ø d1 = 2,0 mm
ae=0
,6-1
,0 x
d1:
Mis
sing
val
ues
only
troc
hodi
al s
lotti
ng a
nd m
illing
is re
com
men
ded.
Oth
erw
ise
ther
e is
the
risk
of to
ol b
reak
age.
ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 ae 0,1 x d1 0,2 x d1 0,3 x d1 0,4 x d1 1st choice suitable
ap max 0,06 0,06 0,06 0,06 ap max 0,072 0,072 0,072 0,072 ap max 0,08 0,08 0,08 0,08
Emul
sion
Com
pres
sed
air
MM
S
nmin 6500 nmin 5500 nmin 5000
Index n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
n Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
Vf(mm/min.)
1.1 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.2 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.3 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.4 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.5 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.6 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.7 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.8 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.9 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.10 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.11 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.12 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.13 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.14 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �1.15 25.000 1000 870 750 620 22.000 1080 940 810 670 19.000 1140 992 855 707 � �1.16 16.000 554 482 416 344 14.000 680 592 510 422 12.000 720 626 540 446 � �2.1 16.000 600 522 450 372 14.000 650 566 488 403 12.000 720 626 540 446 � �2.2 16.000 600 522 450 372 14.000 650 566 488 403 12.000 720 626 540 446 � �2.3 16.000 600 522 450 372 14.000 650 566 488 403 12.000 720 626 540 446 � �2.4 12.000 400 348 300 248 10.000 450 392 338 279 9.000 540 470 405 335 � �2.5 16.000 600 522 450 372 14.000 650 566 488 403 12.000 720 626 540 446 � �2.6 16.000 600 522 450 372 14.000 650 566 488 403 12.000 720 626 540 446 � �2.7 10.000 380 331 285 236 8.000 400 348 300 248 7.000 420 365 315 260 � �3.1 29.000 1160 1009 870 719 25.000 1240 1079 930 769 22.000 1320 1148 990 818 � �3.2 29.000 1160 1009 870 719 25.000 1240 1079 930 769 22.000 1320 1148 990 818 � �3.3 29.000 1160 1009 870 719 25.000 1240 1079 930 769 22.000 1320 1148 990 818 � �3.4 29.000 1160 1009 870 719 25.000 1240 1079 930 769 22.000 1320 1148 990 818 � �3.5 12.000 329 286 246 204 10.000 380 331 285 236 9.000 390 339 293 242 � �3.6 12.000 329 286 246 204 10.000 380 331 285 236 9.000 390 339 293 242 � �3.7 12.000 329 286 246 204 10.000 380 331 285 236 9.000 390 339 293 242 � �3.8 12.000 329 286 246 204 10.000 380 331 285 236 9.000 390 339 293 242 � �4.1 38.000 1520 1322 1140 942 33.000 1600 1392 1200 992 28.000 1680 1462 1260 1042 � �4.2 38.000 1520 1322 1140 942 33.000 1600 1392 1200 992 28.000 1680 1462 1260 1042 � �4.34.44.54.6 29.000 900 783 675 558 25.000 1000 870 750 620 22.000 1140 992 855 707 � �4.7 21.000 800 696 600 496 18.000 900 783 675 558 15.000 900 783 675 558 � �4.8 12.000 294 256 220 182 10.000 260 226 195 161 9.000 390 339 293 242 � �4.9 8.000 196 170 147 121 7.000 260 226 195 161 6.000 260 226 195 161 � �
4.10 8.000 196 170 147 121 7.000 260 226 195 161 6.000 260 226 195 161 � �4.11 21.000 800 696 600 496 18.000 850 740 638 527 15.000 900 783 675 558 � �4.12 21.000 800 696 600 496 18.000 850 740 638 527 15.000 900 783 675 558 � �4.13 25.000 1000 870 750 620 18.000 1000 870 750 620 19.000 1140 992 855 707 � �4.14 29.000 1160 1009 870 719 25.000 1200 1044 900 744 22.000 1320 1148 990 818 � �4.15 16.000 438 381 329 272 14.000 500 435 375 310 12.000 520 452 390 322 � �4.16 29.000 1059 921 794 657 25.000 1200 1044 900 744 22.000 1320 1148 990 818 � �4.174.18 12.000 329 286 246 204 10.000 380 331 285 236 9.000 390 339 293 242 � �4.195.1 12.000 163 142 122 101 10.000 300 261 225 186 9.000 380 331 285 236 � �5.2 12.000 204 178 153 127 10.000 300 261 225 186 9.000 380 331 285 236 � �5.3 12.000 204 178 153 127 10.000 300 261 225 186 9.000 350 305 263 217 � �5.4 8.000 177 154 133 110 7.000 300 261 225 186 6.000 350 305 263 217 � �5.5 8.000 106 92 80 66 7.000 200 174 150 124 6.000 220 191 165 136 � �5.6 8.000 147 128 110 91 7.000 220 191 165 136 6.000 250 218 188 155 � �5.7 8.000 127 111 95 79 7.000 220 191 165 136 6.000 250 218 188 155 � �5.8 8.000 127 111 95 79 7.000 220 191 165 136 6.000 250 218 188 155 � �5.9 21.000 228 199 171 141 18.000 300 261 225 186 15.000 380 331 285 236 � �5.10 21.000 274 238 205 170 18.000 400 348 300 248 15.000 450 392 338 279 � �5.11 16.000 237 206 178 147 14.000 300 261 225 186 12.000 380 331 285 236 � �6.1 25.000 300 261 225 186 21.000 400 348 300 248 19.000 500 435 375 310 �6.2 16.000 173 151 130 107 14.000 200 174 150 124 12.000 240 209 180 149 �6.3 12.000 173 151 130 107 10.000 200 174 150 124 9.000 240 209 180 149 �6.4 12.000 163 142 122 101 10.000 200 174 150 124 9.000 240 209 180 149 �6.5
Solid Carbide milling cutters
13 / 242 toolingcenter.com
uncoated TiCN Ti 400 Ti 1000/Ti 1002 Ti 10011st choice suitable 1st choice suitable 1st choice suitable
Emul
sion
Com
pres
sed
air
MM
S
Emul
sion
Com
pres
sed
air
MM
S
Emul
sion
Com
pres
sed
air
MM
S
Indexv
cv
cv
cv
cv
c
(m/min) (m/min) (m/min) (m/min) (m/min)1.1 90-110 130-160 110-130 160-200 90-130 140-200 � � � 150-170 220-240 � � �1.2 90-110 130-160 110-130 160-200 90-130 140-200 � � � 150-170 220-240 � � �1.3 90-110 130-160 110-130 160-200 90-130 140-200 � � � 150-170 220-240 � � �1.4 70-90 100-130 90-110 120-160 80-100 100-150 � � � 120-140 170-200 � � �1.5 80-100 120-140 100-120 150-170 90-110 100-160 � � � 130-150 180-220 � � �1.6 50-60 70-90 60-80 80-110 60-70 80-110 � � � 70-100 100-140 � � �1.7 70-90 100-130 90-110 120-160 80-100 140-160 � � � 120-140 170-200 � � �1.8 40-60 60-80 50-70 70-100 50-70 70-100 � � � 60-80 90-120 � � �1.9 60-70 80-100 70-80 100-120 70-90 100-140 � � � 80-100 120-150 � � �
1.10 50-60 70-90 60-80 80-110 60-80 70-110 � � � 70-100 100-140 � � �1.11 40-50 60-70 50-60 70-85 50-70 70-90 � � � 60-80 90-120 � � �1.12 50-60 60-80 80-110 60-70 70-100 � � � 70-100 100-140 � � �1.13 30-40 40-60 30-50 50-70 40-50 60-80 � � � 60-70 80-100 � � �1.14 10-20 15-30 15-30 20-40 20-40 30-40 � � � 25-35 40-50 � � �1.15 30-50 40-70 30-60 50-80 40-60 70-100 � � � 60-80 80-120 � � �1.16 25-40 40-60 30-50 50-70 40-60 70-100 � � � 50-80 70-110 � � �2.1 40-50 60-70 50-60 70-80 50-60 70-100 � � � 60-80 90-120 � �2.2 40-50 60-70 50-60 70-80 40-50 60-80 � � � 60-80 90-120 � �2.3 30-40 40-50 30-40 50-60 40-50 50-90 � � � 50-70 80-100 � �2.4 20-30 30-40 25-35 40-50 25-35 40-70 � � � 40-60 60-80 � �2.5 30-40 40-50 30-40 50-60 40-50 70-100 � � � 50-70 80-100 � �2.6 40-50 60-70 50-60 70-80 50-60 80-110 � � � 70-80 100-120 � �2.7 20-30 30-40 25-35 40-50 20-30 50-90 � � � 40-60 60-80 � �3.1 60-80 90-120 70-100 110-140 70-90 100-130 � � � 100-110 140-160 � � �3.2 60-70 80-100 70-90 100-120 60-80 90-120 � � � 80-100 120-140 � � �3.3 60-70 80-100 70-90 100-120 70-90 100-130 � � � 80-100 120-140 � � �3.4 50-60 70-90 60-80 80-110 60-80 90-120 � � � 70-80 100-120 � � �3.5 60-80 90-120 80-100 110-150 70-90 100-130 � � � 100-110 140-160 � � �3.6 60-80 90-120 80-100 110-150 60-80 90-120 � � � 100-110 140-160 � � �3.7 60-70 80-100 70-90 100-120 70-90 100-130 � � � 80-100 120-140 � � �3.8 50-60 70-90 60-80 90-110 60-80 90-120 � � � 70-80 100-120 � � �4.1 <300 <400 <300 <450 280-320 250-350 � � � 180-350 250-500 � � 300-400 300-500 � �4.2 <300 <400 <300 <450 280-320 220-320 � � � 180-350 250-500 � � 300-400 300-500 � �4.3 130-180 200-250 170-210 240-300 220-270 200-300 � � � 140-200 200-300 � � 250-300 300-450 � �4.4 100-120 140-170 120-140 170-200 170-200 200-250 � � � 110-130 160-180 � � 200-250 250-350 � �4.5 40-60 60-80 50-70 70-90 120-180 150-200 � � � 50-70 80-100 � � 150-200 200-250 � �4.6 150-180 210-260- 180-210 250-310 100-130 120-180 � � � 180-210 250-300 � � 220-280 250-330 � �4.7 110-150 160-200 130-170 190-240 100-130 140-200 � � � 130-170 180-240 � � 180-220 200-280 � �4.8 140-180 200-250 170-210 240-300 120-160 160-220 � � � 160-200 220-280 � � 160-200 180-250 � �4.9 120-160 170-230 140-180 210-270 120-160 160-220 � � � 140-180 200-250 � � 150-200 160-250 � �
4.10 80-120 120-150 100-140 150-180 120-160 160-220 � � � 100-140 150-200 � � 140-200 150-250 � �4.11 160-200 230-280 180-210 280-330 100-130 120-200 � � � 180-210 250-300 � � �4.12 120-160 170-230 140-180 210-270 100-130 120-200 � � � 140-180 200-250 � � �4.13 40-60 60-90 40-70 70-100 70-90 90-120 � � � 40-70 60-100 � � �4.14 50-70 70-100 60-80 80-120 120-180 150-220 � � � 60-80 80-120 � � �4.15 30-50 40-70 40-60 50-80 50-70 70-110 � � � 40-60 60-80 � � �4.16 150-180 220-260 180-210 270-310 170-200 170-250 � � 180-210 250-300 � �4.17 70-100 100-140 80-120 120-170 100-120 130-180 � � 80-120 120-180 � �4.18 50-60 60-80 60-70 70-100 60-80 80-100 � � � 60-70 80-100 � � �4.19 50-70 70-90 60-80 80-110 60-80 80-100 � � � 60-80 90-120 � � �5.1 15-25 20-35 35-50 50-70 30-50 50-70 � � � 40-60 60-80 � � �5.2 10-20 15-30 25-35 40-50 25-40 40-60 � � � 30-40 40-60 � � �5.3 15-25 20-35 30-40 40-60 40-60 50-80 � � � 35-50 50-70 � � �5.4 30-50 50-60 30-50 50-70 � � � 40-60 60-80 � � �5.5 25-35 40-50 30-40 40-60 � � � 30-40 40-60 � � �5.6 10-20 30-40 30-40 40-60 � � � 20-30 30-40 � � �5.7 20-30 40-50 25-35 30-50 � � � 30-40 40-60 � � �5.8 20-30 40-50 30-40 40-60 � � � 30-40 40-60 � � �5.9 30-50 40-70 50-60 60-80 40-50 70-100 � � � 50-70 80-100 � � �
5.10 30-40 40-50 40-50 60-70 50-60 80-120 � � � 50-60 70-90 � � �5.11 15-20 30-40 30-40 40-60 � � � 20-30 30-40 � � �6.1 � � � 70-80 100-120 � �6.2 � � � 60-70 80-100 � �6.3 � � � 40-60 60-80 � �6.4 � � � 30-40 40-60 � �6.5 � � � 20-30 30-40 � �
Standard Programme Vc Values
Solid Carbide milling cutters
13
toolingcenter.com 13 / 243
Ti 10 / Ti 20 Ti 20001st choice suitable 1st choice suitable
Emul
sion
Com
pres
sed
air
MM
S
Emul
sion
Com
pres
sed
air
MM
S
Indexv
cv
c
(m/min) (m/min)1.11.21.31.41.51.61.71.81.91.101.111.121.131.141.15 120-180* 180-240 � � �1.16 120-180* 160-220 � � �2.12.22.32.42.52.62.73.13.23.33.43.53.63.73.84.1 150-350 250-500 � �4.2 120-220 150-300 � �4.3 150-180 220-250 � �4.4 100-130 150-180 � �4.54.6 120-150 170-220 � �4.7 140-150 200-220 � �4.84.94.104.11 170-180 240-260 � �4.12 180-200 260-280 � �4.13 140-170 200-240 � �4.14 220-280 300-400 � �4.15 70-100 100-140 � �4.16 140-170 200-250 �4.174.184.195.15.25.35.45.55.65.75.85.9 80-100 � �5.105.116.1 130-180* 180-220 �6.2 130-160* 140-180 �6.3 120-140* 130-160 �6.4 100-120* 90-120 �6.5 60-100* 50-80 �
* Trochodial slot milling only
Solid Carbide milling cutters
13 / 244 toolingcenter.com
Ø d1 = 2,5 mm Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Index apmax x d1
fzmm
fzmm
apmax x d1
fzmm
fzmm
fzmm
1.1 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
1.2 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
1.3 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,041 0,027 0,020 0,054 0,035 0,026
1.4 1,0 0,5 0,014 0,009 0,007 0,020 0,013 0,010 1,5 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
1.5 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.6 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.7 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.8 1,0 0,5 0,014 0,009 0,007 0,020 0,013 0,010 1,5 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
1.9 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.10 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.11 1,0 0,5 0,014 0,009 0,007 0,020 0,013 0,010 1,5 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
1.12 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.13 1,0 0,5 0,014 0,009 0,007 0,020 0,013 0,010 1,5 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
1.14 1,0 0,4 0,014 0,009 0,007 0,020 0,013 0,010 1,5 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
1.15 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
1.16 1,0 0,5 0,017 0,011 0,008 0,024 0,016 0,012 1,5 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
2.1 1,0 0,5 0,011 0,007 0,005 0,016 0,011 0,008 1,5 1 0,022 0,014 0,011 0,029 0,019 0,014 0,036 0,023 0,017
2.2 1,0 0,5 0,011 0,007 0,005 0,016 0,011 0,008 1,5 1 0,022 0,014 0,011 0,029 0,019 0,014 0,036 0,023 0,017
2.3 1,0 0,5 0,011 0,007 0,005 0,016 0,011 0,008 1,5 1 0,022 0,014 0,011 0,029 0,019 0,014 0,036 0,023 0,017
2.4 1,0 0,5 0,011 0,007 0,005 0,016 0,011 0,008 1,5 1 0,022 0,014 0,011 0,029 0,019 0,014 0,036 0,023 0,017
2.5 1,0 0,5 0,011 0,007 0,005 0,016 0,011 0,008 1,5 1 0,022 0,014 0,011 0,029 0,019 0,014 0,036 0,023 0,017
2.6 1,0 0,5 0,011 0,007 0,005 0,016 0,011 0,008 1,5 1 0,022 0,014 0,011 0,029 0,019 0,014 0,036 0,023 0,017
2.7 1,0 0,5 0,011 0,007 0,005 0,016 0,010 0,008 1,5 1 0,021 0,014 0,010 0,028 0,018 0,014 0,035 0,023 0,017
3.1 1,0 0,5 0,020 0,013 0,010 0,029 0,019 0,014 1,5 1 0,039 0,026 0,019 0,052 0,034 0,025 0,064 0,042 0,031
3.2 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
3.3 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
3.4 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
3.5 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
3.6 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
3.7 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
3.8 1,0 0,5 0,017 0,011 0,008 0,025 0,016 0,012 1,5 1 0,034 0,022 0,016 0,044 0,029 0,022 0,055 0,036 0,027
4.1 1,0 0,5 0,028 0,018 0,013 0,040 0,027 0,020 1,5 1 0,055 0,036 0,027 0,072 0,047 0,035 0,090 0,059 0,043
4.2 1,0 0,5 0,028 0,018 0,013 0,040 0,027 0,020 1,5 1 0,055 0,036 0,027 0,072 0,047 0,035 0,090 0,059 0,043
4.3 1,0 0,5 0,028 0,018 0,013 0,040 0,027 0,020 1,5 1 0,055 0,036 0,027 0,072 0,047 0,035 0,090 0,059 0,043
4.4 1,0 0,5 0,028 0,018 0,013 0,040 0,027 0,020 1,5 1 0,055 0,036 0,027 0,072 0,047 0,035 0,090 0,059 0,043
4.5 1,0 0,5 0,028 0,018 0,013 0,040 0,027 0,020 1,5 1 0,055 0,036 0,027 0,072 0,047 0,035 0,090 0,059 0,043
4.6 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.7 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.8 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.9 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.10 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.11 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.12 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.13 1,0 0,5 0,040 0,026 0,019 0,058 0,038 0,028 1,5 1 0,078 0,051 0,038 0,103 0,068 0,050 0,128 0,084 0,062
4.14 1,0 0,5 0,044 0,029 0,021 0,064 0,042 0,031 1,5 1 0,086 0,057 0,042 0,114 0,074 0,055 0,141 0,092 0,068
4.15 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.16 1,0 0,5 0,026 0,017 0,012 0,038 0,025 0,018 1,5 1 0,051 0,033 0,025 0,067 0,044 0,033 0,083 0,054 0,040
4.17 1,0 0,5 0,019 0,012 0,009 0,028 0,018 0,013 1,5 1 0,038 0,025 0,018 0,050 0,032 0,024 0,061 0,040 0,030
4.18 1,0 0,5 0,016 0,010 0,008 0,023 0,015 0,011 1,5 1 0,031 0,021 0,015 0,041 0,027 0,020 0,051 0,034 0,025
4.19 1,0 0,5 0,012 0,008 0,006 0,017 0,011 0,008 1,5 1 0,024 0,015 0,011 0,031 0,020 0,015 0,038 0,025 0,019
5.1 0,7 0,3 0,017 0,011 0,008 0,024 0,016 0,012 1,0 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
5.2 0,7 0,3 0,017 0,011 0,008 0,024 0,016 0,012 1,0 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
5.3 0,7 0,3 0,015 0,010 0,007 0,022 0,014 0,011 1,0 1 0,030 0,020 0,014 0,039 0,026 0,019 0,049 0,032 0,024
5.4 0,7 0,3 0,015 0,010 0,007 0,022 0,014 0,011 1,0 1 0,030 0,020 0,014 0,039 0,026 0,019 0,049 0,032 0,024
5.5 0,7 0,3 0,015 0,010 0,007 0,022 0,014 0,011 1,0 1 0,030 0,020 0,014 0,039 0,026 0,019 0,049 0,032 0,024
5.6 0,7 0,3 0,015 0,010 0,007 0,022 0,014 0,011 1,0 1 0,030 0,020 0,014 0,039 0,026 0,019 0,049 0,032 0,024
5.7 0,7 0,3 0,014 0,009 0,007 0,020 0,013 0,010 1,0 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
5.8 0,7 0,3 0,014 0,009 0,007 0,020 0,013 0,010 1,0 1 0,027 0,018 0,013 0,036 0,024 0,018 0,045 0,029 0,022
5.9 0,7 0,3 0,017 0,011 0,008 0,024 0,016 0,012 1,0 1 0,033 0,022 0,016 0,043 0,028 0,021 0,054 0,035 0,026
5.10 0,7 0,3 0,018 0,012 0,009 0,026 0,017 0,013 1,0 1 0,035 0,023 0,017 0,046 0,030 0,023 0,058 0,038 0,028
5.11 0,7 0,3 0,018 0,012 0,009 0,026 0,017 0,013 1,0 1 0,035 0,023 0,017 0,046 0,030 0,023 0,058 0,038 0,028
ap max ae : 0,1 x d1 ae : 0,1 x d1 ap max ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1
6.1 0,51 0,021 0,030 1,01 0,041 0,054 0,067
6.2 0,51 0,019 0,027 1,01 0,037 0,049 0,061
6.3 0,51 0,017 0,025 1,01 0,034 0,045 0,056
6.4 0,51 0,015 0,022 1,01 0,030 0,040 0,050
6.5 0,51 0,013 0,020 1,01 0,026 0,035 0,043
Finishing cutter ap max ap max ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm
0,7 1,5 0,08* 0,09* 0,1*
1 = Trimming and trochoidal slot milling * = To improve the surface quality reduce the fz
Cutting data for Micro-Mini cutters for milling with diameter < 2.5 mm page 234-241
Cutting Data standard range extra short - long
Solid Carbide milling cutters
13
toolingcenter.com 13 / 245
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20-25 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm1.1 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
1.2 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
1.3 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.4 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
1.5 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.6 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.7 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.8 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
1.9 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.10 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.11 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
1.12 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.13 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
1.14 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
1.15 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
1.16 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
2.1 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,04 0,11 0,07 0,05
2.2 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,04 0,11 0,07 0,05
2.3 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,04 0,11 0,07 0,05
2.4 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,04 0,11 0,07 0,05
2.5 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,04 0,11 0,07 0,05
2.6 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,04 0,11 0,07 0,05
2.7 0,05 0,03 0,02 0,06 0,04 0,03 0,06 0,04 0,03 0,08 0,04 0,03 0,09 0,06 0,04 0,09 0,06 0,04 0,11 0,07 0,05
3.1 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,06 0,14 0,08 0,06 0,16 0,10 0,07 0,17 0,11 0,08 0,20 0,13 0,08
3.2 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
3.3 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
3.4 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
3.5 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
3.6 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
3.7 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
3.8 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,14 0,09 0,06 0,15 0,10 0,07 0,17 0,11 0,07
4.1 0,12 0,08 0,06 0,15 0,10 0,07 0,16 0,10 0,08 0,20 0,11 0,08 0,22 0,15 0,10 0,24 0,16 0,11 0,27 0,18 0,12
4.2 0,12 0,08 0,06 0,15 0,10 0,07 0,16 0,10 0,08 0,20 0,11 0,08 0,22 0,15 0,10 0,24 0,16 0,11 0,27 0,18 0,12
4.3 0,12 0,08 0,06 0,15 0,10 0,07 0,16 0,10 0,08 0,20 0,11 0,08 0,22 0,15 0,10 0,24 0,16 0,11 0,27 0,18 0,12
4.4 0,12 0,08 0,06 0,15 0,10 0,07 0,16 0,10 0,08 0,20 0,11 0,08 0,22 0,15 0,10 0,24 0,16 0,11 0,27 0,18 0,12
4.5 0,12 0,08 0,06 0,15 0,10 0,07 0,16 0,10 0,08 0,20 0,11 0,08 0,22 0,15 0,10 0,24 0,16 0,11 0,27 0,18 0,12
4.6 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.7 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.8 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.9 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.10 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.11 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.12 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.13 0,17 0,11 0,08 0,21 0,14 0,10 0,23 0,15 0,11 0,28 0,16 0,12 0,32 0,21 0,14 0,35 0,23 0,15 0,39 0,26 0,17
4.14 0,18 0,12 0,09 0,23 0,15 0,11 0,25 0,16 0,12 0,31 0,18 0,13 0,35 0,23 0,15 0,38 0,25 0,17 0,43 0,28 0,19
4.15 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.16 0,11 0,07 0,05 0,13 0,09 0,07 0,15 0,10 0,07 0,18 0,11 0,08 0,21 0,13 0,09 0,23 0,15 0,10 0,25 0,17 0,11
4.17 0,08 0,05 0,04 0,10 0,07 0,05 0,11 0,07 0,05 0,13 0,08 0,06 0,15 0,10 0,07 0,17 0,11 0,07 0,19 0,12 0,08
4.18 0,07 0,04 0,03 0,08 0,05 0,04 0,09 0,06 0,04 0,11 0,07 0,05 0,13 0,08 0,05 0,14 0,09 0,06 0,16 0,10 0,07
4.19 0,05 0,03 0,02 0,06 0,04 0,03 0,07 0,05 0,03 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05
5.1 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
5.2 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
5.3 0,06 0,04 0,03 0,08 0,05 0,04 0,09 0,06 0,04 0,11 0,06 0,05 0,12 0,08 0,05 0,13 0,09 0,06 0,15 0,10 0,06
5.4 0,06 0,04 0,03 0,08 0,05 0,04 0,09 0,06 0,04 0,11 0,06 0,05 0,12 0,08 0,05 0,13 0,09 0,06 0,15 0,10 0,06
5.5 0,06 0,04 0,03 0,08 0,05 0,04 0,09 0,06 0,04 0,11 0,06 0,05 0,12 0,08 0,05 0,13 0,09 0,06 0,15 0,10 0,06
5.6 0,06 0,04 0,03 0,08 0,05 0,04 0,09 0,06 0,04 0,11 0,06 0,05 0,12 0,08 0,05 0,13 0,09 0,06 0,15 0,10 0,06
5.7 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
5.8 0,06 0,04 0,03 0,07 0,05 0,04 0,08 0,05 0,04 0,10 0,06 0,04 0,11 0,07 0,05 0,12 0,08 0,05 0,14 0,09 0,06
5.9 0,07 0,05 0,03 0,09 0,06 0,04 0,10 0,06 0,05 0,12 0,07 0,05 0,13 0,09 0,06 0,15 0,10 0,06 0,16 0,11 0,07
5.10 0,07 0,05 0,04 0,09 0,06 0,05 0,10 0,07 0,05 0,13 0,07 0,05 0,14 0,09 0,06 0,16 0,10 0,07 0,18 0,12 0,08
5.11 0,07 0,05 0,04 0,09 0,06 0,05 0,10 0,07 0,05 0,13 0,07 0,05 0,14 0,09 0,06 0,16 0,10 0,07 0,18 0,12 0,08
ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1
6.1 0,09 0,11 0,12 0,13 0,15 0,16 0,18
6.2 0,08 0,10 0,11 0,12 0,13 0,15 0,17
6.3 0,07 0,09 0,10 0,11 0,12 0,14 0,15
6.4 0,06 0,08 0,09 0,10 0,11 0,12 0,13
6.5 0,06 0,07 0,08 0,08 0,10 0,11 0,12
ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm
0,11* 0,13* 0,15* 0,17* 0,19* 0,21* 0,23*
Plunging angle for ramping and helical milling: 3 °
Solid Carbide milling cutters
13 / 246 toolingcenter.com
Ø d1 = 2,5 mm Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Index apmax x d1
fzmm
fzmm
apmax x d1
fzmm
fzmm
fzmm
1.1 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
1.2 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
1.3 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,052 0,034 0,049 0,032
1.4 0,6 0,011 0,007 0,020 0,013 1,0 0,027 0,018 0,034 0,022 0,041 0,027
1.5 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.6 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.7 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.8 0,6 0,011 0,007 0,020 0,013 1,0 0,027 0,018 0,034 0,022 0,041 0,027
1.9 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.10 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.11 0,6 0,011 0,007 0,020 0,013 1,0 0,027 0,018 0,034 0,022 0,041 0,027
1.12 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.13 0,6 0,011 0,007 0,020 0,013 1,0 0,027 0,018 0,034 0,022 0,041 0,027
1.14 0,6 0,011 0,007 0,020 0,013 1,0 0,027 0,018 0,034 0,022 0,041 0,027
1.15 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
1.16 0,6 0,013 0,009 0,024 0,016 1,0 0,033 0,021 0,041 0,027 0,049 0,032
2.1 0,6 0,009 0,006 0,016 0,011 1,0 0,022 0,014 0,027 0,018 0,033 0,021
2.2 0,6 0,009 0,006 0,016 0,011 1,0 0,022 0,014 0,027 0,018 0,033 0,021
2.3 0,6 0,009 0,006 0,016 0,011 1,0 0,022 0,014 0,027 0,018 0,033 0,021
2.4 0,6 0,009 0,006 0,016 0,011 1,0 0,022 0,014 0,027 0,018 0,033 0,021
2.5 0,6 0,009 0,006 0,016 0,011 1,0 0,022 0,014 0,027 0,018 0,033 0,021
2.6 0,6 0,009 0,006 0,016 0,011 1,0 0,022 0,014 0,027 0,018 0,033 0,021
2.7 0,6 0,008 0,005 0,016 0,010 1,0 0,021 0,014 0,026 0,017 0,031 0,021
3.1 0,6 0,015 0,010 0,029 0,019 1,0 0,039 0,025 0,048 0,032 0,058 0,038
3.2 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
3.3 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
3.4 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
3.5 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
3.6 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
3.7 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
3.8 0,6 0,013 0,009 0,025 0,016 1,0 0,033 0,022 0,042 0,027 0,050 0,033
4.1 0,6 0,022 0,014 0,041 0,027 1,0 0,054 0,035 0,068 0,044 0,081 0,053
4.2 0,6 0,022 0,014 0,041 0,027 1,0 0,054 0,035 0,068 0,044 0,081 0,053
4.3 0,6 0,022 0,014 0,041 0,027 1,0 0,054 0,035 0,068 0,044 0,081 0,053
4.4 0,6 0,022 0,014 0,041 0,027 1,0 0,054 0,035 0,068 0,044 0,081 0,053
4.5 0,6 0,022 0,014 0,041 0,027 1,0 0,054 0,035 0,068 0,044 0,081 0,053
4.6 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.7 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.8 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.9 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.10 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.11 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.12 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.13 0,6 0,031 0,020 0,058 0,038 1,0 0,077 0,051 0,097 0,063 0,116 0,076
4.14 0,6 0,034 0,022 0,064 0,042 1,0 0,085 0,056 0,107 0,070 0,128 0,084
4.15 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.16 0,6 0,020 0,013 0,038 0,025 1,0 0,050 0,033 0,063 0,041 0,076 0,049
4.17 0,6 0,015 0,010 0,028 0,018 1,0 0,037 0,024 0,046 0,030 0,056 0,037
4.18 0,6 0,012 0,008 0,023 0,015 1,0 0,031 0,020 0,039 0,025 0,046 0,030
4.19 0,6 0,009 0,006 0,017 0,011 1,0 0,023 0,015 0,029 0,019 0,035 0,023
5.1 0,3 0,013 0,009 0,024 0,016 0,5 0,033 0,021 0,041 0,027 0,049 0,032
5.2 0,3 0,013 0,009 0,024 0,016 0,5 0,033 0,021 0,041 0,027 0,049 0,032
5.3 0,3 0,012 0,008 0,022 0,014 0,5 0,029 0,019 0,037 0,024 0,044 0,029
5.4 0,3 0,012 0,008 0,022 0,014 0,5 0,029 0,019 0,037 0,024 0,044 0,029
5.5 0,3 0,012 0,008 0,022 0,014 0,5 0,029 0,019 0,037 0,024 0,044 0,029
5.6 0,3 0,012 0,008 0,022 0,014 0,5 0,029 0,019 0,037 0,024 0,044 0,029
5.7 0,3 0,011 0,007 0,020 0,013 0,5 0,027 0,018 0,034 0,022 0,041 0,027
5.8 0,3 0,011 0,007 0,020 0,013 0,5 0,027 0,018 0,034 0,022 0,041 0,027
5.9 0,3 0,013 0,009 0,024 0,016 0,5 0,033 0,021 0,041 0,027 0,049 0,032
5.10 0,3 0,014 0,009 0,026 0,017 0,5 0,035 0,023 0,044 0,029 0,052 0,034
5.11 0,3 0,014 0,009 0,026 0,017 0,5 0,035 0,023 0,044 0,029 0,052 0,034
ap max ae : 0,1 x d1 ae : 0,1 x d1 ap max ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1
6.1 0,31 0,013 0,024 0,51 0,033 0,041 0,049
6.2 0,31 0,012 0,022 0,51 0,029 0,037 0,044
6.3 0,31 0,011 0,020 0,51 0,027 0,034 0,041
6.4 0,31 0,010 0,018 0,51 0,024 0,030 0,036
6.5 0,31 0,008 0,016 0,51 0,021 0,026 0,031
Finishing cutter ap max ap max ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm
0,6 1,5 0,08* 0,09* 0,1*
1 = Trimming and trochoidal slot milling * = To improve the surface quality reduce the fz
Cutting data for Micro-Mini cutters for milling with diameter < 2.5 mm page 234-241
Cutting Data standard range extra long
Solid Carbide milling cutters
13
toolingcenter.com 13 / 247
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20-25 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm1.1 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
1.2 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
1.3 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.4 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
1.5 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.6 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.7 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.8 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
1.9 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.10 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.11 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
1.12 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.13 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
1.14 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
1.15 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
1.16 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
2.1 0,04 0,03 0,05 0,04 0,06 0,04 0,07 0,04 0,07 0,05 0,08 0,05 0,09 0,06
2.2 0,04 0,03 0,05 0,04 0,06 0,04 0,07 0,04 0,07 0,05 0,08 0,05 0,09 0,06
2.3 0,04 0,03 0,05 0,04 0,06 0,04 0,07 0,04 0,07 0,05 0,08 0,05 0,09 0,06
2.4 0,04 0,03 0,05 0,04 0,06 0,04 0,07 0,04 0,07 0,05 0,08 0,05 0,09 0,06
2.5 0,04 0,03 0,05 0,04 0,06 0,04 0,07 0,04 0,07 0,05 0,08 0,05 0,09 0,06
2.6 0,04 0,03 0,05 0,04 0,06 0,04 0,07 0,04 0,07 0,05 0,08 0,05 0,09 0,06
2.7 0,04 0,03 0,05 0,03 0,06 0,04 0,06 0,04 0,07 0,05 0,08 0,05 0,09 0,06
3.1 0,08 0,05 0,10 0,06 0,11 0,07 0,12 0,08 0,13 0,09 0,15 0,10 0,16 0,11
3.2 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
3.3 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
3.4 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
3.5 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
3.6 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
3.7 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
3.8 0,07 0,04 0,08 0,06 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09
4.1 0,11 0,07 0,14 0,09 0,15 0,10 0,16 0,11 0,18 0,12 0,20 0,13 0,23 0,15
4.2 0,11 0,07 0,14 0,09 0,15 0,10 0,16 0,11 0,18 0,12 0,20 0,13 0,23 0,15
4.3 0,11 0,07 0,14 0,09 0,15 0,10 0,16 0,11 0,18 0,12 0,20 0,13 0,23 0,15
4.4 0,11 0,07 0,14 0,09 0,15 0,10 0,16 0,11 0,18 0,12 0,20 0,13 0,23 0,15
4.5 0,11 0,07 0,14 0,09 0,15 0,10 0,16 0,11 0,18 0,12 0,20 0,13 0,23 0,15
4.6 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.7 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.8 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.9 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.10 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.11 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.12 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.13 0,16 0,10 0,19 0,13 0,21 0,14 0,23 0,15 0,26 0,17 0,29 0,19 0,33 0,21
4.14 0,17 0,11 0,21 0,14 0,23 0,15 0,26 0,17 0,29 0,19 0,32 0,21 0,36 0,23
4.15 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.16 0,10 0,07 0,13 0,08 0,14 0,09 0,15 0,10 0,17 0,11 0,19 0,12 0,21 0,14
4.17 0,07 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,13 0,08 0,14 0,09 0,16 0,10
4.18 0,06 0,04 0,08 0,05 0,09 0,06 0,09 0,06 0,11 0,07 0,12 0,08 0,13 0,09
4.19 0,05 0,03 0,06 0,04 0,06 0,04 0,07 0,05 0,08 0,05 0,09 0,06 0,10 0,06
5.1 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
5.2 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
5.3 0,06 0,04 0,07 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,12 0,08
5.4 0,06 0,04 0,07 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,12 0,08
5.5 0,06 0,04 0,07 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,12 0,08
5.6 0,06 0,04 0,07 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,07 0,12 0,08
5.7 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
5.8 0,05 0,04 0,07 0,04 0,08 0,05 0,08 0,05 0,09 0,06 0,10 0,07 0,11 0,08
5.9 0,07 0,04 0,08 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,14 0,09
5.10 0,07 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,13 0,09 0,15 0,10
5.11 0,07 0,05 0,09 0,06 0,10 0,06 0,11 0,07 0,12 0,08 0,13 0,09 0,15 0,10
ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1 ae : 0,1 x d1
6.1 0,07 0,08 0,09 0,10 0,11 0,12 0,14
6.2 0,06 0,07 0,08 0,09 0,10 0,11 0,12
6.3 0,05 0,07 0,08 0,08 0,09 0,10 0,11
6.4 0,05 0,06 0,07 0,07 0,08 0,09 0,10
6.5 0,04 0,05 0,06 0,06 0,07 0,08 0,09
ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm ae : 0,2-0,3 mm
0,11* 0,13* 0,000 0,15* 0,17* 0,19* 0,21* 0,23*
Plunging angle for ramping and helical milling: 3 °
Solid Carbide milling cutters
13 / 248 toolingcenter.com
Feedrates for the machining of hardened materials with Ti1000 coated torus and ball nosed cutters
Ball nose end milling cutters
Ball nose end milling cutters
Ball nose cutter for mold and die production
Ball nose cutter for mold and die production
Torus cutter for mold and die production
Torus cutter for mold and die production
Hardness = 40 - 60 HRC Hardness = 40 - 60 HRC Hardness = 40 - 60 HRC Hardness = 40 - 60 HRC Hardness = 40 - 60 HRC Hardness = 40 - 60 HRCvc = 80 - 120 m/min vc = 80 - 120 m/min vc = 80 - 120 m/min vc = 80 - 120 m/min vc = 80 - 120 m/min vc = 80 - 120 m/min
Ø d1(mm) fz (mm) fz (mm) fz (mm) fz (mm) fz (mm) fz (mm)
2 0,005 0,005 0,005 0,005 0,005 0,0053 0,015 0,010 0,015 0,010 0,015 0,0104 0,030 0,015 0,030 0,015 0,030 0,0155 0,050 0,020 0,050 0,020 0,050 0,0206 0,060 0,030 0,060 0,030 0,060 0,0308 0,070 0,035 0,070 0,035 0,070 0,035
10 0,080 0,040 0,080 0,040 0,080 0,04012 0,080 0,050 0,080 0,050 0,080 0,05016 0,100 0,080 0,100 0,080 0,100 0,080
Ø d1
0,05 x d1
0,2 x d1
Ø d1 0,1
x d 1
0,2 x d1
Ø d1 0,1
x d 1
0,2 x d1
Ø d1 0,1
x d 1
Ø d1
0,05 x d1
0,05 x d1
Ø d1
Page 307-
308
Feedrate for machining in steel, iron and non-ferrous materials with torus and ball nosed end mills
Ball nose end milling cutters Ball nose end milling cutters Ball nose cutter for mold and die production
Torus end milling cutters Torus end milling cutters
Ø d1
(mm) fz (mm) fz (mm) fz (mm) fz (mm) fz (mm)
2 0,015 0,010 0,005 0,010 0,0153 0,030 0,020 0,015 0,015 0,0204 0,040 0,030 0,030 0,020 0,0305 0,060 0,050 0,050 0,030 0,0406 0,070 0,060 0,060 0,050 0,0608 0,100 0,080 0,070 0,070 0,08010 0,120 0,100 0,080 0,080 0,10012 0,150 0,120 0,090 0,100 0,12016 0,180 0,150 0,100 0,120 0,15018 0,200 0,180 0,110 0,140 0,16020 0,220 0,200 0,120 0,150 0,180
0,05 x d1
Ø d1
0,2 x d1
Ø d1 0,1
x d 1
Ø d1
0,05 x d1
Ø d1
0,05 x d1
Ø d1
0,2 x d1
0,1
x d 1
Page 307-
308
Feed rates are reduced by 10 - 20% for uncoated tools
Solid Carbide milling cutters
13
toolingcenter.com 13 / 249
Feedrate for machining with hardened materials with Ti2000 coated ball nosed and torus end mills
Hardness = 58 - 64 HRC Hardness = 58 - 64 HRCvc = 130 - 160 m/min vc = 130 - 160 m/min
Ø d1(mm) fz (mm) fz (mm) fz (mm) fz (mm)
0,25 0,001 0,001 0,001 0,0010,5 0,002 0,001 0,001 0,0011 0,005 0,004 0,003 0,0022 0,006 0,005 0,005 0,0043 0,015 0,012 0,010 0,0084 0,030 0,025 0,015 0,0125 0,050 0,040 0,020 0,0166 0,060 0,050 0,030 0,0248 0,070 0,060 0,035 0,028
10 0,080 0,070 0,040 0,03212 0,090 0,080 0,050 0,04014 0,095 0,085 0,070 0,05616 0,100 0,090 0,080 0,06420 0,120 0,100 0,100 0,080
Feedrates for machining hardened materials with Ti2000 coated end mills
Hardness = 58 - 64 HRC Trochoidal slot millingvc = 130 - 160 m/min ap max. = 1,5 x d1
Ø d1(mm) fz (mm) fz (mm) fz (mm) fz (mm)
6 0,018 0,015 0,008 0,0068 0,022 0,018 0,010 0,008
10 0,025 0,020 0,013 0,01012 0,029 0,023 0,015 0,01214 0,033 0,027 0,018 0,01516 0,035 0,028 0,020 0,01618 0,039 0,032 0,023 0,01920 0,041 0,033 0,025 0,021
Ø d1
0,02 - 0,03 x d1
1,5
x d 1
Ø d1
1 x d1
0,5
x d 1
0,2 x d1
Ø d1 0,1
x d 1
0,05 x d1
Ø d1
Page 303
Page 307-
308
Solid Carbide milling cutters
13 / 250 toolingcenter.com
Emul
sion
Com
pres
sed
air
MM
S
shor
t
long
Ø d1 = 3 mm Ø d1 = 4 mm
shor
t
long
Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
apmax x d1
fzmm
fzmm
fzmm
1.1 105 - 140 190 - 240 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.2 105 - 140 200 - 250 1,0 1,0 0,031 0,024 0,017 0,043 0,033 0,024 1,0 1,0** 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
1.3 90 - 120 160 - 210 1,0 1,0 0,031 0,024 0,017 0,043 0,033 0,024 1,0 1,0** 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
1.4 80 --115 140 - 190 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.5 90 - 120 150 - 200 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.6 90 - 120 140 - 190 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.7 80 --115 140- 190 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.8 70 - 100 120 - 170 1,0 1,0 0,025 0,019 0,014 0,035 0,027 0,020 1,0 1,0** 0,050 0,038 0,025 0,067 0,050 0,034 0,09 0,07 0,05
1.9 70 - 100 120- 170 1,0 1,0 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0** 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.10 70 - 100 140 - 190 1,0 1,0 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0** 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.11 70 - 100 120 - 170 1,0 1,0 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0** 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.12 70 - 100 140 - 190 1,0 1,0 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0** 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.13 70 - 100 90 - 150 1,0 1,0 0,020 0,015 0,011 0,028 0,021 0,015 1,0 1,0** 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
1.14 50 - 80 70 - 120 1,0 1,0 0,017 0,013 0,010 0,024 0,018 0,013 1,0 1,0** 0,034 0,025 0,017 0,046 0,034 0,023 0,06 0,05 0,03
1.15 70 - 100 130 - 180 1,0 1,0 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0** 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.16 80 - 120 110 - 160 1,0 1,0 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0** 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
2.1 90 - 130 1,0 1,0 0,025 0,019 0,014 0,035 0,027 0,020 1,0 1,0** 0,050 0,038 0,025 0,067 0,050 0,034 0,09 0,07 0,05
2.2 80 - 120 1,0 1,0 0,020 0,015 0,011 0,028 0,021 0,015 1,0 1,0** 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.3 80 - 120 1,0 1,0 0,020 0,015 0,011 0,028 0,021 0,015 1,0 1,0** 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.4 80 - 120 1,0 1,0 0,020 0,015 0,011 0,028 0,021 0,015 1,0 1,0** 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.5 80 - 120 1,0 1,0 0,020 0,015 0,011 0,028 0,021 0,015 1,0 1,0** 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.6 80 - 120 1,0 1,0 0,020 0,015 0,011 0,028 0,021 0,015 1,0 1,0** 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.7 40 - 60 1,0 1,0 0,017 0,013 0,010 0,024 0,018 0,013 1,0 1,0** 0,035 0,025 0,017 0,046 0,034 0,023 0,06 0,05 0,03
3.1 200 - 240 1,0 1,0 0,040 0,031 0,022 0,055 0,043 0,031 1,0 1,0** 0,079 0,059 0,040 0,106 0,079 0,053 0,14 0,11 0,07
3.2 180 - 220 1,0 1,0 0,040 0,031 0,022 0,055 0,043 0,031 1,0 1,0** 0,079 0,059 0,040 0,106 0,079 0,053 0,14 0,11 0,07
3.3 200 - 240 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
3.4 180 - 220 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
3.5 160 - 200 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
3.6 140 - 180 1,0 1,0 0,028 0,022 0,016 0,040 0,031 0,022 1,0 1,0** 0,057 0,042 0,028 0,076 0,056 0,038 0,10 0,08 0,05
3.7 160 - 200 1,0 1,0 0,028 0,022 0,016 0,040 0,031 0,022 1,0 1,0** 0,057 0,042 0,028 0,076 0,056 0,038 0,10 0,08 0,05
3.8 140 - 180 1,0 1,0 0,028 0,022 0,016 0,040 0,031 0,022 1,0 1,0** 0,057 0,042 0,028 0,076 0,056 0,038 0,10 0,08 0,05
4.14.24.34.44.54.6 140 - 160 230 - 280 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.7 120 - 140 200 - 300 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.8 110 - 140 140 - 180 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.9 90 - 130 120 - 160 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.10 80 - 120 100 - 140 1,0 1,0 0,034 0,026 0,019 0,047 0,036 0,026 1,0 1,0** 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.11 150 - 200 280 - 350 1,0 1,0 0,031 0,024 0,017 0,043 0,033 0,024 1,0 1,0** 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
4.12 140 - 180 260 - 300 1,0 1,0 0,031 0,024 0,017 0,043 0,033 0,024 1,0 1,0** 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
4.134.14 180 - 280 300 - 400 1,0 1,0 0,067 0,052 0,038 0,094 0,073 0,053 1,0 1,0** 0,135 0,101 0,068 0,180 0,134 0,090 0,24 0,18 0,12
4.154.164.174.18 60 - 90 80 - 120 0,5 0,5 0,027 0,021 0,015 0,038 0,029 0,021 1,0 1,0 0,054 0,040 0,027 0,072 0,054 0,036 0,10 0,07 0,05
4.19 40 - 60 60 - 80 0,5 0,5 0,022 0,017 0,013 0,031 0,024 0,018 1,0 1,0 0,045 0,018 0,023 0,060 0,045 0,030 0,08 0,06 0,04
5.1 30 0,5 0,5 0,022 0,017 0,012 0,030 0,023 0,017 0,5 0,5 0,043 0,032 0,022 0,058 0,043 0,029 0,08 0,06 0,04
5.2 30 0,5 0,5 0,020 0,016 0,011 0,028 0,022 0,016 0,5 0,5 0,041 0,030 0,020 0,054 0,040 0,027 0,07 0,05 0,04
5.3 30 0,5 0,5 0,018 0,014 0,010 0,025 0,019 0,014 0,5 0,5 0,036 0,027 0,018 0,048 0,036 0,024 0,06 0,05 0,03
5.4 30 0,5 0,5 0,016 0,012 0,009 0,022 0,017 0,012 0,5 0,5 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.5 30 0,5 0,5 0,016 0,012 0,009 0,022 0,017 0,012 0,5 0,5 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.6 30 0,5 0,5 0,011 0,009 0,006 0,016 0,012 0,009 0,5 0,5 0,023 0,017 0,011 0,030 0,022 0,015 0,04 0,03 0,02
5.7 45 0,5 0,5 0,016 0,007 0,009 0,022 0,017 0,012 0,5 0,5 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.8 30 0,5 0,5 0,016 0,007 0,009 0,022 0,017 0,012 0,5 0,5 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.9 80 - 160 0,5 0,5 0,025 0,019 0,014 0,035 0,027 0,020 0,5 0,5 0,050 0,038 0,025 0,067 0,050 0,034 0,09 0,07 0,05
5.10 80 - 140 0,5 0,5 0,025 0,019 0,014 0,035 0,027 0,019 0,5 0,5 0,050 0,037 0,025 0,066 0,049 0,033 0,09 0,07 0,04
5.11 50 - 100 0,5 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,5 0,5 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
6.1 120 - 160 0,5 0,5 0,020 0,016 0,011 0,028 0,022 0,016 0,5 0,5 0,041 0,030 0,020 0,054 0,040 0,027 0,07 0,05 0,04
6.2 80 - 120 0,3 0,3 0,018 0,014 0,010 0,025 0,019 0,014 0,3 0,3 0,036 0,027 0,018 0,048 0,036 0,024 0,06 0,05 0,03
6.3 60 - 100 0,15 0,15 0,016 0,012 0,009 0,022 0,017 0,012 0,15 0,15 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
6.46.5
**= With an ap of 1,5xD then multiply fz by 0,8 Plunging angle for ramping and helical milling: No. of teeth 4=4 °/No. of teeth 6=1°
Cutting Data Solid Carbide End Mill SCR, short - long
SCR radius cutter at full slot f z reduce by 25%!
Solid Carbide milling cutters
toolingcenter.com 13 / 251
13
Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.2 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,16 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � � �1.3 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,16 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � � �1.4 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.5 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.6 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.7 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.8 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.9 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.10 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.11 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.12 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.13 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.14 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 � � �1.15 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.16 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �2.1 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 �2.2 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.3 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.4 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.5 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.6 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.7 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �3.1 0,18 0,13 0,09 0,19 0,14 0,10 0,19 0,15 0,11 0,21 0,16 0,12 0,22 0,18 0,14 0,25 0,20 0,16 �3.2 0,18 0,13 0,09 0,19 0,14 0,10 0,19 0,15 0,11 0,21 0,16 0,12 0,22 0,18 0,14 0,25 0,20 0,16 �3.3 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 �3.4 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 �3.5 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 �3.6 0,13 0,09 0,06 0,14 0,10 0,07 0,14 0,11 0,08 0,15 0,11 0,09 0,16 0,13 0,10 0,18 0,15 0,11 �3.7 0,13 0,09 0,06 0,14 0,10 0,07 0,14 0,11 0,08 0,15 0,11 0,09 0,16 0,13 0,10 0,18 0,15 0,11 �3.8 0,13 0,09 0,06 0,14 0,10 0,07 0,14 0,11 0,08 0,15 0,11 0,09 0,16 0,13 0,10 0,18 0,15 0,11 �4.14.24.34.44.54.6 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.7 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.8 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.9 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.10 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,18 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.11 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,16 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � �4.12 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,16 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � �4.134.14 0,30 0,22 0,15 0,33 0,25 0,17 0,33 0,26 0,18 0,36 0,27 0,21 0,38 0,31 0,24 0,43 0,35 0,27 � �4.154.164.174.18 0,12 0,09 0,06 0,10 0,10 0,07 0,13 0,10 0,07 0,14 0,11 0,08 0,15 0,12 0,10 0,17 0,14 0,11 � �4.19 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � �5.1 0,10 0,07 0,05 0,11 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,14 0,11 0,09 �5.2 0,09 0,07 0,05 0,10 0,04 0,05 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,07 0,13 0,11 0,08 �5.3 0,08 0,06 0,04 0,09 0,07 0,04 0,09 0,07 0,05 0,10 0,07 0,06 0,10 0,08 0,06 0,11 0,09 0,07 �5.4 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.5 0,07 0,05 0,04 0,08 0,03 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.6 0,05 0,04 0,03 0,06 0,04 0,03 0,06 0,04 0,03 0,06 0,05 0,04 0,06 0,05 0,04 0,07 0,06 0,05 �5.7 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.8 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.9 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 �5.10 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,11 0,09 0,16 0,13 0,10 �5.11 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 �6.1 0,09 0,07 0,05 0,10 0,07 0,05 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,07 0,13 0,11 0,08 �6.2 0,08 0,06 0,04 0,09 0,07 0,04 0,09 0,07 0,05 0,10 0,07 0,06 0,10 0,08 0,06 0,11 0,09 0,07 �6.3 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �6.46.5
SCR radius cutter at full slot f z reduce by 25%!
Solid Carbide milling cutters
13 / 252 toolingcenter.com
Emul
sion
Com
pres
sed
air
MM
S
extra
long
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 90 - 130 130 - 180 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.2 90 - 130 130 - 180 1,0* 0,5 0,031 0,024 0,017 0,043 0,033 0,024 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
1.3 70 - 100 110 - 160 1,0* 0,5 0,031 0,024 0,017 0,043 0,033 0,024 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
1.4 70 - 100 90 - 140 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.5 70 - 100 110 - 160 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.6 70 - 100 110 - 160 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.7 70 - 100 90 - 140 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
1.8 50 - 80 70 - 120 1,0* 0,5 0,025 0,019 0,014 0,035 0,027 0,020 0,050 0,038 0,025 0,067 0,050 0,034 0,09 0,07 0,05
1.9 50 - 80 70 - 120 1,0* 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.10 50 - 80 70 - 120 1,0* 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.11 50 - 80 70 - 120 1,0* 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.12 50 - 80 70 - 120 1,0* 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.13 50 - 80 70 - 120 1,0* 0,5 0,020 0,015 0,011 0,028 0,021 0,015 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
1.14 40 - 70 50 - 80 1,0* 0,5 0,017 0,013 0,010 0,024 0,018 0,013 0,034 0,025 0,017 0,046 0,034 0,023 0,06 0,05 0,03
1.15 50 - 80 70 - 120 1,0* 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
1.16 60 - 90 90 - 140 1,0* 0,5 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
2.1 60 - 100 1,0* 0,5 0,025 0,019 0,014 0,035 0,027 0,020 0,050 0,038 0,025 0,067 0,050 0,034 0,09 0,07 0,05
2.2 50 - 80 1,0* 0,5 0,020 0,015 0,011 0,028 0,021 0,015 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.3 50 - 80 1,0* 0,5 0,020 0,015 0,011 0,028 0,021 0,015 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.4 50 - 80 1,0* 0,5 0,020 0,015 0,011 0,028 0,021 0,015 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.5 50 - 80 1,0* 0,5 0,020 0,015 0,011 0,028 0,021 0,015 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.6 50 - 80 1,0* 0,5 0,020 0,015 0,011 0,028 0,021 0,015 0,040 0,030 0,020 0,053 0,039 0,026 0,07 0,05 0,04
2.7 30 - 50 1,0* 0,5 0,017 0,013 0,010 0,024 0,018 0,013 0,034 0,025 0,017 0,047 0,034 0,023 0,06 0,05 0,03
3.1 160 - 200 1,0* 0,5 0,040 0,031 0,022 0,055 0,043 0,031 0,079 0,059 0,040 0,106 0,079 0,053 0,14 0,11 0,07
3.2 120 - 160 1,0* 0,5 0,040 0,031 0,022 0,055 0,043 0,031 0,079 0,059 0,040 0,106 0,079 0,053 0,14 0,11 0,07
3.3 160 - 200 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
3.4 120 - 160 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
3.5 120 - 160 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
3.6 100 - 140 1,0* 0,5 0,028 0,022 0,016 0,040 0,031 0,022 0,057 0,042 0,028 0,076 0,056 0,038 0,10 0,08 0,05
3.7 120 - 160 1,0* 0,5 0,028 0,022 0,016 0,040 0,031 0,022 0,057 0,042 0,028 0,076 0,056 0,038 0,10 0,08 0,05
3.8 100 - 140 1,0* 0,5 0,028 0,022 0,016 0,040 0,031 0,022 0,057 0,042 0,028 0,076 0,056 0,038 0,10 0,08 0,05
4.14.24.34.44.54.6 100 - 130 220 - 240 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.7 90 - 110 180 - 220 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.8 80 - 110 140 - 180 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.9 60 - 90 120 - 160 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.10 60 - 90 100 - 140 1,0* 0,5 0,034 0,026 0,019 0,047 0,036 0,026 0,068 0,050 0,034 0,090 0,067 0,045 0,12 0,09 0,06
4.11 110 - 150 280 - 320 1,0* 0,5 0,031 0,024 0,017 0,043 0,033 0,024 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
4.12 100 - 140 260 - 300 1,0* 0,5 0,031 0,024 0,017 0,043 0,033 0,024 0,062 0,046 0,031 0,083 0,062 0,041 0,11 0,08 0,06
4.134.14 120 - 180 300 - 400 1,0* 0,5 0,067 0,052 0,038 0,094 0,073 0,053 0,135 0,101 0,068 0,180 0,134 0,090 0,24 0,18 0,12
4.154.164.174.18 40 - 75 80 - 120 0,5* 0,25 0,027 0,021 0,015 0,038 0,029 0,021 0,054 0,040 0,027 0,072 0,054 0,036 0,10 0,07 0,05
4.19 30 - 50 60 - 80 0,5* 0,25 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,018 0,023 0,060 0,045 0,030 0,08 0,06 0,04
5.1 30 0,5* 0,25 0,022 0,017 0,012 0,030 0,023 0,017 0,043 0,032 0,022 0,058 0,043 0,029 0,08 0,06 0,04
5.2 30 0,5* 0,25 0,020 0,016 0,011 0,028 0,022 0,016 0,041 0,030 0,020 0,054 0,040 0,027 0,07 0,05 0,04
5.3 25 0,5* 0,25 0,018 0,014 0,010 0,025 0,019 0,014 0,036 0,027 0,018 0,048 0,036 0,024 0,06 0,05 0,03
5.4 25 0,5* 0,25 0,016 0,012 0,009 0,022 0,017 0,012 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.5 25 0,5* 0,25 0,016 0,012 0,009 0,022 0,017 0,012 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.6 25 0,5* 0,25 0,011 0,009 0,006 0,016 0,012 0,009 0,023 0,017 0,011 0,030 0,022 0,015 0,04 0,03 0,02
5.7 45 0,5* 0,25 0,016 0,007 0,009 0,022 0,017 0,012 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.8 25 0,5* 0,25 0,016 0,007 0,009 0,022 0,017 0,012 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
5.9 35 - 65 0,5* 0,25 0,025 0,019 0,014 0,035 0,027 0,020 0,050 0,038 0,025 0,067 0,050 0,034 0,09 0,07 0,05
5.10 30 - 55 0,5* 0,25 0,025 0,019 0,014 0,035 0,027 0,019 0,050 0,037 0,025 0,066 0,049 0,033 0,09 0,07 0,04
5.11 30 - 55 0,5* 0,25 0,022 0,017 0,013 0,031 0,024 0,018 0,045 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
6.1 80 - 120 0,5* 0,5 0,020 0,016 0,011 0,028 0,022 0,016 0,041 0,030 0,020 0,054 0,040 0,027 0,07 0,05 0,04
6.2 60 - 100 0,5* 0,3 0,018 0,014 0,010 0,025 0,019 0,014 0,036 0,027 0,018 0,048 0,036 0,024 0,06 0,05 0,03
6.3 50 - 90 0,5* 0,15 0,016 0,012 0,009 0,022 0,017 0,012 0,032 0,023 0,016 0,042 0,031 0,021 0,06 0,04 0,03
6.46.5
* = Trimming and trochoidal slot milling
Cutting Data Solid Carbide End Mill SCR, extra long
Solid Carbide milling cutters
13
toolingcenter.com 13 / 253
Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.2 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,15 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � � �1.3 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,15 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � � �1.4 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.5 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.6 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.7 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �1.8 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,10 0,07 0,12 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.9 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.10 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.11 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.12 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.13 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.14 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 � � �1.15 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �1.16 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � � �2.1 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,10 0,07 0,12 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 �2.2 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.3 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.4 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.5 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.6 0,09 0,07 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 �2.7 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �3.1 0,18 0,13 0,09 0,19 0,14 0,10 0,19 0,15 0,11 0,20 0,16 0,12 0,22 0,18 0,14 0,25 0,20 0,16 � � �3.2 0,18 0,13 0,09 0,19 0,14 0,10 0,19 0,15 0,11 0,20 0,16 0,12 0,22 0,18 0,14 0,25 0,20 0,16 � � �3.3 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �3.4 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �3.5 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � � �3.6 0,13 0,09 0,06 0,14 0,10 0,07 0,14 0,11 0,08 0,14 0,11 0,09 0,16 0,13 0,10 0,18 0,15 0,11 � � �3.7 0,13 0,09 0,06 0,14 0,10 0,07 0,14 0,11 0,08 0,14 0,11 0,09 0,16 0,13 0,10 0,18 0,15 0,11 � � �3.8 0,13 0,09 0,06 0,14 0,10 0,07 0,14 0,11 0,08 0,14 0,11 0,09 0,16 0,13 0,10 0,18 0,15 0,11 � � �4.14.24.34.44.54.6 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.7 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.8 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.9 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.10 0,15 0,11 0,08 0,17 0,12 0,08 0,16 0,13 0,09 0,17 0,14 0,11 0,19 0,16 0,12 0,21 0,17 0,14 � �4.11 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,15 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � �4.12 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,08 0,15 0,13 0,10 0,18 0,14 0,11 0,20 0,16 0,12 � �4.134.14 0,30 0,22 0,15 0,33 0,25 0,17 0,33 0,26 0,18 0,33 0,27 0,21 0,38 0,31 0,24 0,43 0,35 0,27 � �4.154.164.174.18 0,12 0,09 0,06 0,10 0,10 0,07 0,13 0,10 0,07 0,13 0,11 0,08 0,15 0,12 0,10 0,17 0,14 0,11 � �4.19 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 � �5.1 0,10 0,07 0,05 0,11 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,14 0,11 0,09 �5.2 0,09 0,07 0,05 0,10 0,04 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,11 0,08 �5.3 0,08 0,06 0,04 0,09 0,07 0,04 0,09 0,07 0,05 0,09 0,07 0,06 0,10 0,08 0,06 0,11 0,09 0,07 �5.4 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.5 0,07 0,05 0,04 0,08 0,03 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.6 0,05 0,04 0,03 0,06 0,04 0,03 0,06 0,04 0,03 0,06 0,05 0,04 0,06 0,05 0,04 0,07 0,06 0,05 �5.7 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.8 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �5.9 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,10 0,07 0,12 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 �5.10 0,11 0,08 0,06 0,12 0,09 0,06 0,12 0,09 0,07 0,12 0,10 0,08 0,14 0,11 0,09 0,16 0,13 0,10 �5.11 0,10 0,08 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 �6.1 0,09 0,07 0,05 0,10 0,07 0,05 0,10 0,08 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,11 0,08 �6.2 0,08 0,06 0,04 0,09 0,07 0,04 0,09 0,07 0,05 0,09 0,07 0,06 0,10 0,08 0,06 0,11 0,09 0,07 �6.3 0,07 0,05 0,04 0,08 0,06 0,04 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,06 0,10 0,08 0,06 �6.46.5
Plunging angle for ramping and helical milling: No. of teeth 4=4 °/No. of teeth 6=1°
Solid Carbide milling cutters
13 / 254 toolingcenter.com
long
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 170-200 1,0 0,024 0,021 0,015 0,036 0,028 0,020 0,050 0,037 0,025 0,060 0,045 0,030 0,08 0,06 0,04
1.2 170-200 1,0 0,024 0,021 0,015 0,036 0,028 0,020 0,050 0,037 0,025 0,060 0,045 0,030 0,08 0,06 0,04
1.3 150-180 1,0 0,019 0,017 0,012 0,029 0,022 0,016 0,040 0,030 0,020 0,048 0,036 0,024 0,06 0,05 0,03
1.4 150-180 1,0 0,019 0,017 0,012 0,029 0,022 0,016 0,040 0,030 0,020 0,048 0,036 0,024 0,06 0,05 0,03
1.5 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.6 140-170 1,0 0,019 0,017 0,012 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.7 150-180 1,0 0,024 0,021 0,015 0,029 0,022 0,016 0,040 0,030 0,020 0,048 0,036 0,024 0,06 0,05 0,03
1.8 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.9 150-180 1,0 0,024 0,021 0,015 0,029 0,022 0,016 0,040 0,030 0,020 0,048 0,036 0,024 0,06 0,05 0,03
1.10 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.11 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.12 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.13 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.14 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
1.15 150-180 1,0 0,024 0,021 0,015 0,029 0,022 0,016 0,040 0,030 0,020 0,048 0,036 0,024 0,06 0,05 0,03
1.16 130-160 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
2.12.22.32.42.52.62.73.1 170-200 1,0 0,028 0,025 0,018 0,043 0,033 0,024 0,056 0,042 0,028 0,072 0,054 0,036 0,10 0,07 0,05
3.2 170-200 1,0 0,028 0,025 0,018 0,043 0,033 0,024 0,056 0,042 0,028 0,072 0,054 0,036 0,10 0,07 0,05
3.3 150-180 1,0 0,024 0,021 0,015 0,036 0,028 0,020 0,046 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
3.4 150-180 1,0 0,024 0,021 0,015 0,036 0,028 0,020 0,046 0,034 0,023 0,060 0,045 0,030 0,08 0,06 0,04
3.5 100-120 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
3.6 80-100 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
3.7 100-120 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
3.8 80-100 1,0 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.18 80-100 0,5 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
4.195.15.25.35.45.55.65.75.85.95.105.116.1 100-120 0,5 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
6.2 80-100 0,3 0,014 0,012 0,009 0,022 0,017 0,012 0,030 0,022 0,015 0,036 0,027 0,018 0,05 0,04 0,02
6.3 60-70 0,15 0,009 0,008 0,006 0,014 0,011 0,008 0,020 0,015 0,010 0,024 0,018 0,012 0,03 0,02 0,02
6.46.5
Cutting data SCR solid carbide torus end mill, long
Solid Carbide milling cutters
13
toolingcenter.com 13 / 255
Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mm
1.1 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �1.2 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �1.3 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.4 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.5 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.6 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.7 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.8 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.9 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �
1.10 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.11 0,06 0,05 0,03 0,00 0,00 0,00 0,08 0,06 0,05 � �1.12 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.13 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.14 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.15 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.16 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �2.12.22.32.42.52.62.73.1 0,12 0,09 0,06 0,14 0,11 0,07 0,15 0,12 0,09 � �3.2 0,12 0,09 0,06 0,14 0,11 0,07 0,15 0,12 0,09 � �3.3 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �3.4 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �3.5 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �3.6 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �3.7 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �3.8 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.18 0,06 0,05 0,03 0,05 0,05 0,04 0,08 0,06 0,05 � �4.195.15.25.35.45.55.65.75.85.95.105.116.1 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 �6.2 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 �6.3 0,04 0,03 0,02 0,05 0,04 0,02 0,05 0,04 0,03 �6.46.5
Solid Carbide milling cutters
13 / 256 toolingcenter.com
extra
long
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
1.1 120-140 1,0* 0,5 0,08 0,06 0,04 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �1.2 120-140 1,0* 0,5 0,08 0,06 0,04 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �1.3 100-130 1,0* 0,5 0,06 0,05 0,03 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.4 100-130 1,0* 0,5 0,06 0,05 0,03 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.5 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.6 100-120 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.7 100-130 1,0* 0,5 0,06 0,05 0,03 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.8 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.9 100-130 1,0* 0,5 0,06 0,05 0,03 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �
1.10 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.11 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,00 0,00 0,00 0,08 0,06 0,05 � �1.12 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.13 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.14 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �1.15 100-130 1,0* 0,5 0,06 0,05 0,03 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,08 0,06 � �1.16 90-110 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �2.12.22.32.42.52.62.73.1 120-140 1,0* 0,5 0,10 0,07 0,05 0,12 0,09 0,06 0,14 0,11 0,07 0,15 0,12 0,09 � �3.2 120-140 1,0* 0,5 0,10 0,07 0,05 0,12 0,09 0,06 0,14 0,11 0,07 0,15 0,12 0,09 � �3.3 100-130 1,0* 0,5 0,08 0,06 0,04 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �3.4 100-130 1,0* 0,5 0,08 0,06 0,04 0,10 0,08 0,05 0,12 0,09 0,06 0,14 0,10 0,08 � �3.5 70-85 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �3.6 60-70 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �3.7 70-85 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �3.8 60-70 1,0* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.18 60-70 0,5* 0,25 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 � �4.195.15.25.35.45.55.65.75.85.95.105.116.1 70-85 0,5* 0,5 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 �6.2 60-70 0,5* 0,3 0,05 0,04 0,02 0,06 0,05 0,03 0,07 0,05 0,04 0,08 0,06 0,05 �6.3 50-60 0,5* 0,15 0,03 0,02 0,02 0,04 0,03 0,02 0,05 0,04 0,02 0,05 0,04 0,03 �6.46.5
* = Trimming and trochoidal slot milling
Cutting data SCR solid carbide torus end mill, extra long
Solid Carbide milling cutters
toolingcenter.com 13 / 257
13
ap ae
Ø d1=3 mm Ø d1=4 mm Ø d1=5 mm Ø d1=6 mm Ø d1=8 mm Ø d1=10 mm Ø d1=12 mm Ø d1=16 mm
1st choice suitable
Emul
sion
Com
pres
sed
air
MM
S
IndexVc
(m/min.)x d1
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 230-250 0,05 0,6 0,110 0,152 0,190 0,228 0,30 0,38 0,46 0,06 � �1.2 230-250 0,05 0,6 0,110 0,152 0,190 0,228 0,30 0,38 0,46 0,06 � �1.3 200-220 0,04 0,5 0,090 0,120 0,150 0,180 0,24 0,30 0,36 0,48 � �1.4 200-220 0,04 0,5 0,090 0,120 0,150 0,180 0,24 0,30 0,36 0,48 � �1.5 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.6 190-210 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 � �1.7 200-220 0,04 0,5 0,090 0,120 0,150 0,180 0,24 0,30 0,36 0,48 � �1.8 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.9 200-220 0,04 0,5 0,090 0,120 0,150 0,180 0,24 0,30 0,36 0,48 � �1.10 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.11 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.12 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.13 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.14 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �1.15 200-220 0,04 0,5 0,090 0,120 0,150 0,180 0,24 0,30 0,36 0,48 � �1.16 170-190 0,03 0,3 0,066 0,090 0,110 0,132 0,18 0,22 0,26 0,35 � �2.12.22.32.42.52.62.73.1 230-250 0,05 0,6 0,120 0,160 0,200 0,240 0,32 0,40 0,48 0,64 � �3.2 230-250 0,05 0,6 0,120 0,160 0,200 0,240 0,32 0,40 0,48 0,64 � �3.3 200-220 0,04 0,5 0,096 0,130 0,160 0,192 0,26 0,32 0,38 0,51 � �3.4 200-220 0,04 0,5 0,096 0,130 0,160 0,192 0,26 0,32 0,38 0,51 � �3.5 130-150 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 � �3.6 100-120 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 � �3.7 130-150 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 � �3.8 100-120 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 � �4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.18 100-120 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 � �4.195.15.25.35.45.55.65.75.85.95.105.116.1 130-150 0,03 0,4 0,072 0,100 0,120 0,144 0,19 0,24 0,29 0,38 �6.2 100-120 0,03 0,3 0,060 0,080 0,100 0,120 0,16 0,20 0,24 0,32 �6.3 90-110 0,02 0,3 0,048 0,064 0,080 0,096 0,13 0,16 0,19 0,26 �6.4 80-100 0,02 0,2 0,024 0,056 0,070 0,084 0,11 0,14 0,17 0,22 �6.5 60-80 0,02 0,2 0,036 0,048 0,060 0,072 0,10 0,12 0,14 0,19 �
Cutting data SCR solid carbide torus end mill, HSC machining
Solid Carbide milling cutters
13 / 258 toolingcenter.com
5098
1…
5098
2…
5098
3…
5098
4…
5098
5…
5098
6…
5098
7…
5098
8…
5093
2…
5093
7…
5093
6…
5093
8…50
610…
5210
4 ...
5061
1…52
103…
5093
9…
5094
6…
5094
8…
5094
7…
Suitable for:Strength
( N/mm2 - HB )
Aluminium (non alloyed, low alloyed) < 350 N/mm2 400-450
400-450
Aluminium alloys < 0.5% Si < 500 N/mm2 400-450
400-450
Aluminium alloys 0.5-10% Si < 400 N/mm2 350-400
350-400
Aluminium alloys 10-15% Si < 400 N/mm2 300-400
300-400
300-400
300-400
300-400
Aluminium alloys > 15% Si < 400 N/mm2 300-400
250-300
250-300
250-300
250-300
Copper (non alloyed, low alloyed) < 350 N/mm2 400-450
400-450
Copper wrought alloys < 700 N/mm2 200-250
200-250
200-250
200-250
200-250
Special copper alloys < 200 HB 200-250
200-250
200-250
200-250
200-250
Special copper alloys < 300 HB 200-250
200-250
200-250
200-250
200-250
Special copper alloys > 300 HB 200-250
200-250
200-250
200-250
200-250
Short-chipping brass, bronze, red bronze < 600 N/mm2 350-400
350-400
Long-chipping brass < 600 N/mm2 350-400
350-400
Thermoplastics500-550
500-550
Duroplastics300-350
300-350
300-350
300-350
300-350
300-350
300-350
300-350
300-350
300-350
500-550
500-550
Fibre-reinforced plastics150-200
150-200
150-200
150-200
150-200
150-200
150-200
150-200
150-200
150-200
500-600
150-200
150-200
150-200
150-200
150-200
Magnesium and magnesium alloys < 850 N/mm2 250 250 250 250 250
Graphite300-400
300-400
300-400
300-400
300-400
300-400
300-400
300-400
300-400
500-600
500-600
300-400
300-400
300-400
Tungsten and tungsten alloys200-250
250-300
Molybdenum and molybdenum alloys200-250
250-300
Cutting data for solid carbide cutter for plastic machining
Plastics - Thermoset - Hardwood - Pressed Cardboard
End milling cutter Type W Ball nosed cutter Type W
Shoulder milling, trimming Slot milling Copy milling - Line milling
Roughing Finishing Roughing Finishingap= 1xd1 ap= 1,0xd1 ap= 0,5xd1 ap= 0,03xd1
ae= 0,4xd1 ae= 0,1xd1 ae= 0,5xd1 ae= 0,02xd1
d1 (mm) fz(mm)
fz(mm)
fz(mm)
fz(mm)
fz(mm)
2 0,024 0,018 0,016 0,028 0,0243 0,036 0,027 0,024 0,042 0,0364 0,048 0,036 0,032 0,056 0,0485 0,060 0,045 0,04 0,07 0,066 0,072 0,054 0,048 0,084 0,0728 0,10 0,07 0,06 0,11 0,10
10 0,12 0,09 0,08 0,14 0,1212 0,14 0,11 0,10 0,17 0,1414 0,17 0,13 0,11 0,20 0,1716 0,19 0,14 0,13 0,22 0,1918 0,22 0,16 0,14 0,25 0,2220 0,24 0,18 0,16 0,28 0,24
Plastic - Thermoplast - Polycarbonate - Non-ferrous metal - Hard rubber
End milling cutter Type W Ball nosed cutter Type W
Shoulder milling, trimming Slot milling Copy milling - Line milling
Roughing Finishing Roughing Finishingap= 1,5xd1 ap= 1,0xd1 ap= 0,5xd1 ap= 0,03xd1
ae= 0,8xd1 ae= 0,1xd1 ae= 0,5xd1 ae= 0,02xd1
d1 (mm) fz(mm)
fz(mm)
fz(mm)
fz(mm)
fz(mm)
2 0,024 0,022 0,017 0,037 0,033 0,036 0,033 0,026 0,056 0,0454 0,048 0,044 0,034 0,074 0,065 0,060 0,055 0,043 0,093 0,0756 0,072 0,066 0,051 0,111 0,098 0,10 0,09 0,07 0,15 0,12
10 0,12 0,11 0,09 0,19 0,1512 0,14 0,13 0,10 0,22 0,1814 0,17 0,15 0,12 0,26 0,2116 0,19 0,18 0,14 0,30 0,2418 0,22 0,20 0,15 0,33 0,2720 0,24 0,22 0,17 0,37 0,30
Fiber reinforced plastics AFK - CFK - GFK
End mill staggered teeth
Shoulder milling, trimming Copy milling - Line milling
ap= 1xd1 ap= 1,0xd1 ap= 0,35xd1 ap= 0,35xd1
ae= 0,05xd1 ae= 0,05xd1
fine medium fine medium
d1 (mm) f(mm/U)
f(mm/U)
f(mm/U)
f(mm/U)
2 0,16 0,14 0,14 0,123 0,24 0,21 0,21 0,184 0,32 0,28 0,28 0,245 0,40 0,35 0,35 0,306 0,48 0,42 0,42 0,368 0,64 0,56 0,56 0,48
10 0,80 0,70 0,70 0,6012 0,96 0,84 0,84 0,7216 1,28 1,12 1,12 0,9620 1,60 1,40 1,40 1,20
Cutting data for solid carbide burrs
Suitable for:Steel, Steel Casting and Hardened Steel
d1 (mm) Vc(m/min.)
n (1/min.)
3 300 - 600 23.000 - 63.5006 300 - 600 16.000 - 32.0008 300 - 600 12.000 - 24.00010 300 - 600 9.500 - 19.00012 300 - 600 8.000 - 16.00016 300 - 600 6.000 - 12.000
DC 10
Coolant
Vc(m/min.)
Emul
sion
Com
pres
sed
air
MM
S
Graphite 300 �
Solid Carbide milling cutters
toolingcenter.com 13 / 259
13
Emul
sion
Com
pres
sed
air
MM
S
shor
t
Ø d1 = 1,5 mm Ø d1 = 2 mm
shor
t
long
Ø d1 = 3 mm Ø d1 = 4 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
apmax x d1
fzmm
fzmm
1.1 130 - 180 150 - 200 0,25 0,020 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 � � �1.2 130 - 180 150 - 200 0,25 0,012 0,013 0,010 0,020 0,019 0,014 1,0 1,0 0,038 0,029 0,021 0,049 0,038 0,028 � � �1.3 140 - 160 130 - 180 0,25 0,014 0,013 0,010 0,020 0,019 0,014 1,0 1,0 0,0382 0,0295 0,021 0,049 0,038 0,028 � � �1.4 120 - 140 110 - 160 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 � � �1.5 140 - 160 130 - 180 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 � � �1.6 140 - 160 130 - 180 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 � � �1.7 120 - 160 110 - 160 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 � � �1.8 80 - 120 90 - 140 0,25 0,013 0,012 0,009 0,016 0,015 0,011 1,0 1,0 0,031 0,024 0,018 0,063 0,049 0,035 � � �1.9 80 - 120 90 - 140 0,25 0,011 0,010 0,008 0,014 0,013 0,010 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 � � �
1.10 80 - 120 90 - 140 0,25 0,011 0,010 0,008 0,014 0,013 0,010 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 � � �1.11 80 - 120 90 - 140 0,25 0,011 0,010 0,008 0,014 0,013 0,010 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 � � �1.12 80 - 120 90 - 140 0,25 0,011 0,010 0,008 0,013 0,012 0,009 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 � � �1.13 80 - 120 90 - 140 0,25 0,009 0,008 0,006 0,013 0,012 0,009 1,0 1,0 0,025 0,019 0,014 0,031 0,024 0,018 � � �1.14 60 - 100 50 - 100 0,25 0,009 0,008 0,006 0,011 0,010 0,008 1,0 1,0 0,020 0,016 0,011 0,027 0,021 0,015 � � �1.15 80 - 120 90 - 140 0,25 0,011 0,010 0,008 0,014 0,013 0,010 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 � � �1.16 100 - 140 110 - 160 0,25 0,011 0,010 0,008 0,014 0,013 0,010 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 � � �2.1 100 - 140 0,25 0,013 0,012 0,009 0,016 0,015 0,011 1,0 1,0 0,031 0,024 0,018 0,040 0,031 0,023 �2.2 100 - 120 0,25 0,009 0,008 0,006 0,013 0,012 0,009 1,0 1,0 0,025 0,019 0,014 0,031 0,024 0,018 �2.3 80 - 100 0,25 0,009 0,008 0,006 0,013 0,012 0,009 1,0 1,0 0,025 0,019 0,014 0,031 0,024 0,018 �2.4 80 - 100 0,25 0,009 0,008 0,006 0,013 0,012 0,009 1,0 1,0 0,025 0,019 0,014 0,031 0,024 0,018 �2.5 100 - 120 0,25 0,009 0,008 0,006 0,013 0,012 0,009 1,0 1,0 0,025 0,019 0,014 0,031 0,024 0,018 �2.6 100 - 120 0,25 0,009 0,008 0,006 0,013 0,012 0,009 1,0 1,0 0,025 0,019 0,014 0,031 0,024 0,018 �2.7 40 - 60 0,25 0,009 0,008 0,006 0,011 0,010 0,008 1,0 1,0 0,020 0,016 0,011 0,027 0,021 0,015 �3.1 180 - 220 0,25 0,020 0,019 0,014 0,025 0,024 0,018 1,0 1,0 0,047 0,036 0,026 0,063 0,049 0,035 �3.2 160 - 200 0,25 0,020 0,019 0,014 0,025 0,024 0,018 1,0 1,0 0,047 0,036 0,026 0,063 0,049 0,035 �3.3 180 -220 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 �3.4 160 -200 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 �3.5 140 -180 0,25 0,014 0,013 0,010 0,022 0,020 0,015 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 �3.6 120 - 160 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 �3.7 140 -180 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 �3.8 120 -160 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 �4.14.24.34.44.54.6 220 - 240 220 - 240 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 � �4.7 220 - 240 220 - 240 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 � �4.8 140 - 160 140 - 160 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 � �4.9 120 - 140 120 - 140 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 � �
4.10 100 - 120 100 - 120 0,25 0,016 0,015 0,011 0,022 0,020 0,015 1,0 1,0 0,040 0,031 0,023 0,054 0,042 0,030 � �4.11 280 - 300 280 - 300 0,25 0,007 0,007 0,005 0,020 0,019 0,014 1,0 1,0 0,038 0,029 0,021 0,049 0,038 0,028 � �4.12 280 - 300 280 - 300 0,25 0,014 0,013 0,010 0,020 0,019 0,014 1,0 1,0 0,038 0,029 0,021 0,049 0,038 0,028 � �4.134.14 300 - 340 300 - 340 0,25 0,029 0,027 0,020 0,043 0,040 0,030 1,0 1,0 0,058 0,045 0,033 0,108 0,083 0,060 � �4.154.164.174.18 80 - 120 80 - 120 0,25 0,014 0,013 0,010 0,018 0,017 0,013 1,0 1,0 0,034 0,026 0,019 0,045 0,035 0,025 �4.19 60 - 80 60 - 80 0,25 0,011 0,010 0,008 0,014 0,013 0,010 1,0 1,0 0,027 0,021 0,015 0,036 0,028 0,020 �5.1 30 0,25 0,013 0,012 0,009 0,016 0,015 0,011 0,5 0,5 0,031 0,024 0,018 0,040 0,031 0,023 �5.2 30 0,25 0,013 0,012 0,009 0,016 0,015 0,011 0,5 0,5 0,031 0,024 0,018 0,040 0,031 0,023 �5.3 25 0,25 0,011 0,010 0,008 0,014 0,013 0,010 0,5 0,5 0,027 0,021 0,015 0,036 0,028 0,020 �5.4 25 0,25 0,011 0,010 0,008 0,014 0,013 0,010 0,5 0,5 0,027 0,021 0,015 0,036 0,028 0,020 �5.5 25 0,25 0,011 0,010 0,008 0,014 0,013 0,010 0,5 0,5 0,027 0,021 0,015 0,036 0,028 0,020 �5.6 25 0,25 0,011 0,010 0,008 0,014 0,013 0,010 0,5 0,5 0,027 0,021 0,015 0,036 0,028 0,020 �5.7 45 0,25 0,009 0,008 0,006 0,013 0,012 0,009 0,5 0,5 0,025 0,012 0,014 0,031 0,024 0,018 �5.8 30 0,25 0,009 0,008 0,006 0,013 0,012 0,009 0,5 0,5 0,025 0,012 0,014 0,031 0,024 0,018 �5.9 80 - 100 0,25 0,013 0,012 0,009 0,016 0,015 0,011 0,5 0,5 0,031 0,024 0,018 0,040 0,031 0,023 �
5.10 60 - 80 0,25 0,014 0,013 0,010 0,018 0,017 0,013 0,5 0,5 0,034 0,026 0,019 0,045 0,035 0,025 �5.11 60 - 80 0,25 0,014 0,013 0,010 0,018 0,017 0,013 0,5 0,5 0,034 0,026 0,019 0,045 0,035 0,025 �6.1 80 - 100 0,25 0,013 0,012 0,009 0,016 0,015 0,011 0,5 0,5 0,031 0,024 0,018 0,040 0,031 0,023 �6.2 80 - 120 0,20 0,011 0,010 0,008 0,014 0,013 0,010 0,3 0,3 0,027 0,021 0,015 0,036 0,028 0,020 �6.3 60 - 80 0,15 0,009 0,008 0,006 0,013 0,012 0,009 0,15 0,15 0,025 0,019 0,014 0,031 0,024 0,018 �6.46.5
Plunging angle for ramping and helical milling: No. of teeth 3=5 °/No. of teeth 4=4°/No. of teeth 5=3°
Cutting Data Solid Carbide End Mill ICR, short - long
Solid Carbide milling cutters
13 / 260 toolingcenter.com
Emul
sion
Com
pres
sed
air
MM
S
shor
t
long
Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 130 - 180 150 - 200 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,16 0,13 0,09
1.2 130 - 180 150 - 200 1,0 1,0** 0,063 0,049 0,035 0,074 0,057 0,041 0,10 0,08 0,06 0,12 0,10 0,07 0,15 0,11 0,08
1.3 140 - 160 130 - 180 1,0 1,0** 0,063 0,049 0,035 0,074 0,057 0,041 0,10 0,08 0,06 0,12 0,10 0,07 0,15 0,11 0,08
1.4 120 - 140 110 - 160 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,12 0,09 0,07 0,14 0,10 0,08
1.5 140 - 160 130 - 180 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,12 0,09 0,07 0,14 0,10 0,08
1.6 140 - 160 130 - 180 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,12 0,09 0,07 0,14 0,10 0,08
1.7 120 - 160 110 - 160 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,12 0,09 0,07 0,14 0,10 0,08
1.8 80 - 120 90 - 140 1,0 1,0** 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05 0,11 0,09 0,06 0,12 0,09 0,07
1.9 80 - 120 90 - 140 1,0 1,0** 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
1.10 80 - 120 90 - 140 1,0 1,0** 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
1.11 80 - 120 90 - 140 1,0 1,0** 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
1.12 80 - 120 90 - 140 1,0 1,0** 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
1.13 80 - 120 90 - 140 1,0 1,0** 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
1.14 60 - 100 50 - 100 1,0 1,0** 0,034 0,026 0,019 0,040 0,031 0,023 0,05 0,04 0,03 0,07 0,05 0,04 0,11 0,08 0,06
1.15 80 - 120 90 - 140 1,0 1,0** 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
1.16 100 - 140 110 - 160 1,0 1,0** 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
2.1 100 - 140 1,0 1,0** 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05 0,10 0,08 0,06 0,12 0,09 0,07
2.2 100 - 120 1,0 1,0** 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,10 0,07 0,05
2.3 80 - 100 1,0 1,0** 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
2.4 80 - 100 1,0 1,0** 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
2.5 100 - 120 1,0 1,0** 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
2.6 100 - 120 1,0 1,0** 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
2.7 40 - 60 1,0 1,0** 0,034 0,026 0,019 0,038 0,029 0,021 0,05 0,04 0,03 0,07 0,05 0,04 0,08 0,06 0,05
3.1 180 - 220 1,0 1,0** 0,079 0,061 0,044 0,094 0,073 0,053 0,13 0,10 0,07 0,14 0,10 0,08 0,16 0,13 0,09
3.2 160 - 200 1,0 1,0** 0,079 0,061 0,044 0,094 0,073 0,053 0,13 0,10 0,07 0,14 0,10 0,08 0,16 0,13 0,09
3.3 180 -220 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,14 0,11 0,08
3.4 160 -200 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,12 0,09 0,07 0,14 0,11 0,08
3.5 140 -180 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,11 0,09 0,06 0,14 0,10 0,08
3.6 120 - 160 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,11 0,09 0,06 0,14 0,10 0,08
3.7 140 -180 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,11 0,09 0,06 0,14 0,10 0,08
3.8 120 -160 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,11 0,09 0,06 0,14 0,10 0,08
4.14.24.34.44.54.6 220 - 240 220 - 240 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,16 0,13 0,09
4.7 220 - 240 220 - 240 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,16 0,13 0,09
4.8 140 - 160 140 - 160 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,16 0,13 0,09
4.9 120 - 140 120 - 140 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,16 0,13 0,09
4.10 100 - 120 100 - 120 1,0 1,0** 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06 0,14 0,10 0,08 0,16 0,13 0,09
4.11 280 - 300 280 - 300 1,0 1,0** 0,063 0,049 0,035 0,741 0,572 0,413 0,10 0,08 0,06 0,12 0,10 0,07 0,15 0,11 0,08
4.12 280 - 300 280 - 300 1,0 1,0** 0,063 0,049 0,035 0,074 0,057 0,041 0,10 0,08 0,06 0,12 0,10 0,07 0,15 0,11 0,08
4.134.14 300 - 340 300 - 340 1,0 1,0** 0,135 0,104 0,075 0,162 0,125 0,090 0,22 0,17 0,12 0,27 0,21 0,15 0,32 0,25 0,18
4.154.164.174.18 80 - 120 80 - 120 1,0 1,0** 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,14 0,10 0,08 0,11 0,11 0,08
4.19 60 - 80 60 - 80 1,0 1,0** 0,045 0,021 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
5.1 30 0,5 0,5 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05 0,10 0,08 0,06 0,12 0,09 0,07
5.2 30 0,5 0,5 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05 0,10 0,08 0,06 0,12 0,06 0,07
5.3 25 0,5 0,5 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
5.4 25 0,5 0,5 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
5.5 25 0,5 0,5 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,05 0,06
5.6 25 0,5 0,5 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
5.7 45 0,5 0,5 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
5.8 30 0,5 0,5 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
5.9 80 - 100 0,5 0,5 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05 0,10 0,08 0,06 0,12 0,09 0,07
5.10 60 - 80 0,5 0,5 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,11 0,09 0,06 0,14 0,10 0,08
5.11 60 - 80 0,5 0,5 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05 0,11 0,09 0,06 0,14 0,10 0,08
6.1 80 - 100 0,5 0,5 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05 0,10 0,08 0,06 0,12 0,09 0,07
6.2 80 - 120 0,3 0,3 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04 0,09 0,07 0,05 0,11 0,08 0,06
6.3 60 - 80 0,15 0,15 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04 0,08 0,06 0,04 0,09 0,07 0,05
6.46.5
**= With an ap of 1,5xD then multiply fz by 0,8
Cutting Data Solid Carbide End Mill ICR, short - long
Solid Carbide milling cutters
toolingcenter.com 13 / 261
13
shor
t
long
Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Index apmax x d1
fzmm
fzmm
fzmm
fzmm
1.1 1,0 1,0** 0,18 0,14 0,10 0,19 0,16 0,12 0,20 0,17 0,13 0,22 0,19 0,15 � � �1.2 1,0 1,0** 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � � �1.3 1,0 1,0** 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � � �1.4 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.5 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.6 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.7 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.8 1,0 1,0** 0,14 0,11 0,08 0,14 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 � � �1.9 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.10 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.11 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.12 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.13 1,0 1,0** 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 � � �1.14 1,0 1,0** 0,09 0,07 0,05 0,10 0,08 0,06 0,10 0,09 0,07 0,14 0,13 0,10 � � �1.15 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.16 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �2.1 1,0 1,0** 0,14 0,11 0,08 0,14 0,12 0,09 0,12 0,10 0,08 0,16 0,14 0,11 �2.2 1,0 1,0** 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.3 1,0 1,0** 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.4 1,0 1,0** 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.5 1,0 1,0** 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.6 1,0 1,0** 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.7 1,0 1,0** 0,09 0,07 0,05 0,10 0,08 0,06 0,10 0,09 0,07 0,11 0,09 0,08 �3.1 1,0 1,0** 0,22 0,17 0,12 0,22 0,18 0,14 0,24 0,20 0,16 0,25 0,22 0,18 �3.2 1,0 1,0** 0,22 0,17 0,12 0,22 0,18 0,14 0,24 0,20 0,16 0,25 0,22 0,18 �3.3 1,0 1,0** 0,19 0,15 0,11 0,19 0,16 0,12 0,20 0,17 0,13 0,25 0,22 0,18 �3.4 1,0 1,0** 0,19 0,15 0,11 0,19 0,16 0,12 0,20 0,17 0,13 0,22 0,19 0,15 �3.5 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �3.6 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �3.7 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �3.8 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �4.14.24.34.44.54.6 1,0 1,0** 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.7 1,0 1,0** 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.8 1,0 1,0** 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.9 1,0 1,0** 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �
4.10 1,0 1,0** 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.11 1,0 1,0** 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � �4.12 1,0 1,0** 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � �4.134.14 1,0 1,0** 0,38 0,29 0,21 0,38 0,31 0,24 0,41 0,35 0,27 0,43 0,38 0,30 � �4.154.164.174.18 1,0 1,0** 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �4.19 1,0 1,0** 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.1 0,5 0,5 0,14 0,11 0,08 0,15 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �5.2 0,5 0,5 0,14 0,11 0,08 0,15 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �5.3 0,5 0,5 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.4 0,5 0,5 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.5 0,5 0,5 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.6 0,5 0,5 0,11 0,09 0,06 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.7 0,5 0,5 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �5.8 0,5 0,5 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �5.9 0,5 0,5 0,14 0,11 0,08 0,14 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �
5.10 0,5 0,5 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �5.11 0,5 0,5 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �6.1 0,5 0,5 0,14 0,11 0,08 0,14 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �6.2 0,3 0,3 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �6.3 0,15 0,15 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �6.46.5
Plunging angle for ramping and helical milling: No. of teeth 3=5 °/No. of teeth 4=4°/No. of teeth 5=3°
Solid Carbide milling cutters
13 / 262 toolingcenter.com
Emul
sion
Com
pres
sed
air
MM
S
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 110 - 155 130 - 180 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
1.2 110 - 155 130 - 180 1 0,5 0,038 0,029 0,021 0,049 0,038 0,028 0,063 0,049 0,035 0,074 0,057 0,041 0,10 0,08 0,06
1.3 120 - 140 110 - 160 1 0,5 0,038 0,029 0,021 0,049 0,038 0,028 0,063 0,049 0,035 0,074 0,057 0,041 0,10 0,08 0,06
1.4 100 - 120 90 - 140 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
1.5 120 - 140 110 - 160 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
1.6 120 - 140 110 - 160 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
1.7 100 - 140 90 - 140 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
1.8 70 - 105 70 - 120 1 0,5 0,031 0,024 0,018 0,063 0,049 0,035 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05
1.9 70 - 105 70 - 120 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
1.10 70 - 105 70 - 120 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
1.11 70 - 105 70 - 120 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
1.12 70 - 105 70 - 120 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
1.13 70 - 105 70 - 120 1 0,5 0,025 0,019 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
1.14 55 - 85 50 - 80 1 0,5 0,020 0,016 0,011 0,027 0,021 0,015 0,034 0,026 0,019 0,040 0,031 0,023 0,05 0,04 0,03
1.15 70 - 105 70 - 120 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
1.16 85 - 120 90 - 140 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
2.1 85 - 120 1 0,5 0,031 0,024 0,018 0,040 0,031 0,023 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05
2.2 85 - 105 1 0,5 0,025 0,019 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
2.3 70 - 90 1 0,5 0,025 0,019 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
2.4 70 - 90 1 0,5 0,025 0,019 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
2.5 85 - 105 1 0,5 0,025 0,019 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
2.6 85 - 105 1 0,5 0,025 0,019 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
2.7 35 - 55 1 0,5 0,020 0,016 0,011 0,027 0,021 0,015 0,034 0,026 0,019 0,038 0,029 0,021 0,05 0,04 0,03
3.1 150 - 190 1 0,5 0,047 0,036 0,026 0,063 0,049 0,035 0,079 0,061 0,044 0,094 0,073 0,053 0,13 0,10 0,07
3.2 140 - 170 1 0,5 0,047 0,036 0,026 0,063 0,049 0,035 0,079 0,061 0,044 0,094 0,073 0,053 0,13 0,10 0,07
3.3 150 -190 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
3.4 140 -170 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
3.5 120 -150 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
3.6 105 - 140 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
3.7 120 -150 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
3.8 105 -140 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
4.14.24.34.44.54.6 190 - 205 190 - 205 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
4.7 190 - 205 190 - 205 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
4.8 120 - 140 120 - 140 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
4.9 105 - 120 105 - 120 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
4.10 85 - 105 85 - 105 1 0,5 0,040 0,031 0,023 0,054 0,042 0,030 0,067 0,052 0,038 0,081 0,062 0,045 0,11 0,08 0,06
4.11 240 - 260 240 - 260 1 0,5 0,038 0,029 0,021 0,049 0,038 0,028 0,063 0,049 0,035 0,741 0,572 0,413 0,10 0,08 0,06
4.12 240 - 260 240 - 260 1 0,5 0,038 0,029 0,021 0,049 0,038 0,028 0,063 0,049 0,035 0,074 0,057 0,041 0,10 0,08 0,06
4.134.14 250 - 290 250 - 290 1 0,5 0,058 0,045 0,033 0,108 0,083 0,060 0,135 0,104 0,075 0,162 0,125 0,090 0,22 0,17 0,12
4.154.164.174.18 70 - 105 70 - 105 1 0,5 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
4.19 50 - 70 50 - 70 1 0,5 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,021 0,025 0,054 0,042 0,030 0,07 0,06 0,04
5.1 27 0,5 0,25 0,031 0,024 0,018 0,040 0,031 0,023 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05
5.2 27 0,5 0,25 0,031 0,024 0,018 0,040 0,031 0,023 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05
5.3 23 0,5 0,25 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
5.4 23 0,5 0,25 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
5.5 23 0,5 0,25 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
5.6 23 0,5 0,25 0,027 0,021 0,015 0,036 0,028 0,020 0,045 0,035 0,025 0,054 0,042 0,030 0,07 0,06 0,04
5.7 38 0,5 0,25 0,025 0,012 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
5.8 27 0,5 0,25 0,025 0,012 0,014 0,031 0,024 0,018 0,040 0,031 0,023 0,047 0,036 0,026 0,06 0,05 0,04
5.9 70 - 85 0,5 0,25 0,031 0,024 0,018 0,040 0,031 0,023 0,052 0,040 0,029 0,061 0,047 0,034 0,08 0,06 0,05
5.10 50 - 70 0,5 0,25 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
5.11 50 - 70 0,5 0,25 0,034 0,026 0,019 0,045 0,035 0,025 0,056 0,043 0,031 0,067 0,052 0,038 0,09 0,07 0,05
6.1 70 - 85 0,5* 0,031 0,024 0,040 0,031 0,052 0,040 0,061 0,047 0,08 0,06
6.2 70 - 105 0,5* 0,027 0,021 0,036 0,028 0,045 0,035 0,054 0,042 0,07 0,06
6.3 50 - 70 0,5* 0,025 0,019 0,031 0,024 0,040 0,031 0,047 0,036 0,06 0,05
6.46.5
* = Trimming and trochoidal slot milling
Cutting Data Solid Carbide End Mill ICR, extra long
Solid Carbide milling cutters
toolingcenter.com 13 / 263
13
Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,14 0,10 0,08 0,16 0,13 0,09 0,18 0,14 0,10 0,19 0,16 0,12 0,20 0,17 0,13 0,22 0,19 0,15 � � �1.2 0,12 0,10 0,07 0,15 0,11 0,08 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � � �1.3 0,12 0,10 0,07 0,15 0,11 0,08 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � � �1.4 0,12 0,09 0,07 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.5 0,12 0,09 0,07 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.6 0,12 0,09 0,07 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.7 0,12 0,09 0,07 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 � � �1.8 0,11 0,09 0,06 0,12 0,09 0,07 0,14 0,11 0,08 0,14 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 � � �1.9 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.10 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.11 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.12 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.13 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 � � �1.14 0,07 0,05 0,04 0,11 0,08 0,06 0,09 0,07 0,05 0,10 0,08 0,06 0,10 0,09 0,07 0,14 0,13 0,10 � � �1.15 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �1.16 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 � � �2.1 0,10 0,08 0,06 0,12 0,09 0,07 0,14 0,11 0,08 0,14 0,12 0,09 0,12 0,10 0,08 0,16 0,14 0,11 �2.2 0,08 0,06 0,04 0,10 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.3 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.4 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.5 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.6 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �2.7 0,07 0,05 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,10 0,09 0,07 0,11 0,09 0,08 �3.1 0,14 0,10 0,08 0,16 0,13 0,09 0,22 0,17 0,12 0,22 0,18 0,14 0,24 0,20 0,16 0,25 0,22 0,18 �3.2 0,14 0,10 0,08 0,16 0,13 0,09 0,22 0,17 0,12 0,22 0,18 0,14 0,24 0,20 0,16 0,25 0,22 0,18 �3.3 0,14 0,10 0,08 0,14 0,11 0,08 0,19 0,15 0,11 0,19 0,16 0,12 0,20 0,17 0,13 0,25 0,22 0,18 �3.4 0,12 0,09 0,07 0,14 0,11 0,08 0,19 0,15 0,11 0,19 0,16 0,12 0,20 0,17 0,13 0,22 0,19 0,15 �3.5 0,11 0,09 0,06 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �3.6 0,11 0,09 0,06 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �3.7 0,11 0,09 0,06 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �3.8 0,11 0,09 0,06 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �4.14.24.34.44.54.6 0,14 0,10 0,08 0,16 0,13 0,09 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.7 0,14 0,10 0,08 0,16 0,13 0,09 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.8 0,14 0,10 0,08 0,16 0,13 0,09 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.9 0,14 0,10 0,08 0,16 0,13 0,09 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.10 0,14 0,10 0,08 0,16 0,13 0,09 0,14 0,11 0,08 0,19 0,16 0,12 0,21 0,17 0,14 0,22 0,19 0,15 � �4.11 0,12 0,10 0,07 0,15 0,11 0,08 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � �4.12 0,12 0,10 0,07 0,15 0,11 0,08 0,17 0,13 0,10 0,18 0,14 0,11 0,19 0,16 0,12 0,20 0,17 0,14 � �4.134.14 0,27 0,21 0,15 0,32 0,25 0,18 0,38 0,29 0,21 0,38 0,31 0,24 0,41 0,35 0,27 0,43 0,38 0,30 � �4.154.164.174.18 0,14 0,10 0,08 0,11 0,11 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �4.19 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.1 0,10 0,08 0,06 0,12 0,09 0,07 0,14 0,11 0,08 0,15 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �5.2 0,10 0,08 0,06 0,12 0,06 0,07 0,14 0,11 0,08 0,15 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �5.3 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.4 0,09 0,07 0,05 0,11 0,08 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.5 0,09 0,07 0,05 0,11 0,05 0,06 0,13 0,10 0,07 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.6 0,09 0,07 0,05 0,11 0,08 0,06 0,11 0,09 0,06 0,13 0,10 0,08 0,14 0,12 0,09 0,14 0,13 0,10 �5.7 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �5.8 0,08 0,06 0,04 0,09 0,07 0,05 0,11 0,09 0,06 0,11 0,09 0,07 0,12 0,10 0,08 0,13 0,11 0,09 �5.9 0,10 0,08 0,06 0,12 0,09 0,07 0,14 0,11 0,08 0,14 0,12 0,09 0,15 0,13 0,10 0,16 0,14 0,11 �5.10 0,11 0,09 0,06 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �5.11 0,11 0,09 0,06 0,14 0,10 0,08 0,16 0,12 0,09 0,16 0,13 0,10 0,17 0,15 0,11 0,18 0,16 0,13 �6.1 0,10 0,08 0,12 0,09 0,14 0,11 0,14 0,12 0,16 0,13 0,16 0,14 �6.2 0,09 0,07 0,11 0,08 0,13 0,10 0,13 0,10 0,14 0,12 0,14 0,13 �6.3 0,08 0,06 0,09 0,07 0,11 0,09 0,11 0,09 0,12 0,10 0,13 0,11 �6.46.5
Plunging angle for ramping and helical milling: No. of teeth 3=5 °/No. of teeth 4=4°/No. of teeth 5=3°
Solid Carbide milling cutters
13 / 264 toolingcenter.com
long
Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.11.21.31.41.51.61.71.81.91.101.111.121.131.141.151.162.1 110 1,0 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,040 0,030 0,020 0,05 0,04 0,03 0,06 0,04 0,03
2.2 100 1,0 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,040 0,030 0,020 0,05 0,04 0,03 0,06 0,04 0,03
2.3 80 1,0 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,040 0,030 0,020 0,05 0,04 0,03 0,06 0,04 0,03
2.4 80 1,0 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,040 0,030 0,020 0,05 0,04 0,03 0,06 0,04 0,03
2.5 100 1,0 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,040 0,030 0,020 0,05 0,04 0,03 0,06 0,04 0,03
2.6 100 1,0 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,040 0,030 0,020 0,05 0,04 0,03 0,06 0,04 0,03
2.7 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
3.13.23.33.43.53.63.73.84.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.1 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.2 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.3 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.4 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.5 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.6 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.7 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.8 55 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,09 0,07 0,05
5.9 120 1,0 0,5 0,045 0,035 0,025 0,060 0,045 0,030 0,070 0,052 0,035 0,09 0,07 0,05 0,11 0,08 0,06
5.10 100 1,0 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,070 0,052 0,035 0,08 0,06 0,04 0,10 0,07 0,05
5.11 80 1,0 0,5 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,04 0,03 0,08 0,06 0,04
6.16.26.36.46.5
Cutting data solid carbide end mill Ti, 52 500 ... / 52 502 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 265
13
Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mm
1.11.21.31.41.51.61.71.81.91.101.111.121.131.141.151.162.1 0,08 0,06 0,04 0,08 0,06 0,05 0,11 0,09 0,07 �2.2 0,08 0,06 0,04 0,08 0,06 0,05 0,11 0,09 0,07 �2.3 0,08 0,06 0,04 0,08 0,06 0,05 0,11 0,09 0,07 �2.4 0,08 0,06 0,04 0,08 0,06 0,05 0,11 0,09 0,07 �2.5 0,08 0,06 0,04 0,08 0,06 0,05 0,11 0,09 0,07 �2.6 0,08 0,06 0,04 0,08 0,06 0,05 0,11 0,09 0,07 �2.7 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �3.13.23.33.43.53.63.73.84.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.1 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.2 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.3 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.4 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.5 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.6 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.7 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.8 0,10 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �5.9 0,14 0,10 0,07 0,17 0,13 0,10 0,19 0,15 0,12 �
5.10 0,12 0,09 0,06 0,14 0,10 0,08 0,16 0,13 0,10 �5.11 0,10 0,07 0,05 0,10 0,08 0,06 0,13 0,10 0,08 �6.16.26.36.46.5
Solid Carbide milling cutters
13 / 266 toolingcenter.com
long
Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
1.11.21.31.41.51.61.71.81.91.101.111.121.131.141.151.162.1 110 1,0 0,016 0,012 0,021 0,016 0,026 0,020 0,03 0,03 0,04 0,03 0,05 0,04 0,07 0,05
2.2 100 1,0 0,016 0,012 0,021 0,016 0,026 0,020 0,03 0,03 0,04 0,03 0,05 0,04 0,07 0,05
2.3 80 1,0 0,016 0,012 0,021 0,016 0,026 0,020 0,03 0,03 0,04 0,03 0,05 0,04 0,07 0,05
2.4 80 1,0 0,016 0,012 0,021 0,016 0,026 0,020 0,03 0,03 0,04 0,03 0,05 0,04 0,07 0,05
2.5 100 1,0 0,016 0,012 0,021 0,016 0,026 0,020 0,03 0,03 0,04 0,03 0,05 0,04 0,07 0,05
2.6 100 1,0 0,016 0,012 0,021 0,016 0,026 0,020 0,03 0,03 0,04 0,03 0,05 0,04 0,07 0,05
2.7 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
3.13.23.33.43.53.63.73.84.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.1 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.2 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.3 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.4 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.5 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.6 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.7 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.8 55 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,06 0,05 0,07 0,05 0,08 0,06
5.9 120 1,0 0,033 0,025 0,039 0,030 0,046 0,035 0,06 0,05 0,07 0,06 0,09 0,07 0,13 0,10
5.10 100 1,0 0,026 0,020 0,035 0,027 0,046 0,035 0,05 0,04 0,07 0,05 0,08 0,06 0,10 0,08
5.11 80 1,0 0,020 0,015 0,026 0,020 0,033 0,025 0,04 0,03 0,05 0,04 0,07 0,05 0,08 0,06
6.16.26.36.46.5
Cutting data solid carbide end mill Ti, 50 501 ...
Solid Carbide milling cutters
13
toolingcenter.com 13 / 267
Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mm
1.11.21.31.41.51.61.71.81.9
1.101.111.121.131.141.151.162.1 0,09 0,07 �2.2 0,09 0,07 �2.3 0,09 0,07 �2.4 0,09 0,07 �2.5 0,09 0,07 �2.6 0,09 0,07 �2.7 0,09 0,07 �3.13.23.33.43.53.63.73.84.14.24.34.44.54.64.74.84.9
4.104.114.124.134.144.154.164.174.184.195.1 0,09 0,07 �5.2 0,09 0,07 �5.3 0,09 0,07 �5.4 0,09 0,07 �5.5 0,09 0,07 �5.6 0,09 0,07 �5.7 0,09 0,07 �5.8 0,09 0,07 �5.9 0,16 0,12 �5.10 0,13 0,10 �5.11 0,10 0,08 �6.16.26.36.46.5
Solid Carbide milling cutters
13 / 268 toolingcenter.com
shor
t
Ø d1 = 1 mm Ø d1 = 2 mm
shor
t
long
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
apmax x d1
fzmm
fzmm
fzmm
1.1 120 - 140 0,5xd1 0,010 0,008 0,005 0,019 0,016 0,010 1,0xd1 1,0xd1** 0,038 0,028 0,018 0,051 0,038 0,024 0,064 0,047 0,030
1.2 120 - 140 0,5xd1 0,010 0,008 0,005 0,019 0,016 0,010 1,0xd1 1,0xd1** 0,038 0,028 0,018 0,051 0,038 0,024 0,064 0,047 0,030
1.3 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.4 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.5 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.6 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.7 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.8 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.9 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.10 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.11 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.12 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.13 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.14 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.15 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
1.16 100 - 120 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
2.1 60 - 80 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,030 0,022 0,014 0,038 0,028 0,018 0,049 0,036 0,023
2.2 60 - 80 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,030 0,022 0,014 0,038 0,028 0,018 0,049 0,036 0,023
2.3 60 - 80 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,030 0,022 0,014 0,038 0,028 0,018 0,049 0,036 0,023
2.42.5 60 -80 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,030 0,022 0,014 0,038 0,028 0,018 0,049 0,036 0,023
2.6 60 -80 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,030 0,022 0,014 0,038 0,028 0,018 0,049 0,036 0,023
2.73.1 120 - 140 0,5xd1 0,012 0,010 0,006 0,023 0,019 0,012 1,0xd1 1,0xd1** 0,045 0,033 0,021 0,060 0,044 0,028 0,075 0,055 0,035
3.2 120 - 140 0,5xd1 0,012 0,010 0,006 0,023 0,019 0,012 1,0xd1 1,0xd1** 0,045 0,033 0,021 0,060 0,044 0,028 0,075 0,055 0,035
3.3 120 - 140 0,5xd1 0,012 0,010 0,006 0,023 0,019 0,012 1,0xd1 1,0xd1** 0,045 0,033 0,021 0,060 0,044 0,028 0,075 0,055 0,035
3.4 120 - 140 0,5xd1 0,012 0,010 0,006 0,023 0,019 0,012 1,0xd1 1,0xd1** 0,045 0,033 0,021 0,060 0,044 0,028 0,075 0,055 0,035
3.5 100 - 120 0,5xd1 0,010 0,008 0,005 0,019 0,016 0,010 1,0xd1 1,0xd1** 0,038 0,028 0,018 0,051 0,038 0,024 0,064 0,047 0,030
3.6 100 - 120 0,5xd1 0,010 0,008 0,005 0,019 0,016 0,010 1,0xd1 1,0xd1** 0,038 0,028 0,018 0,051 0,038 0,024 0,064 0,047 0,030
3.7 100 - 120 0,5xd1 0,010 0,008 0,005 0,019 0,016 0,010 1,0xd1 1,0xd1** 0,038 0,028 0,018 0,051 0,038 0,024 0,064 0,047 0,030
3.8 100 - 120 0,5xd1 0,010 0,008 0,005 0,019 0,016 0,010 1,0xd1 1,0xd1** 0,038 0,028 0,018 0,051 0,038 0,024 0,064 0,047 0,030
4.14.24.34.44.54.6 120 - 140 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
4.7 120 - 140 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
4.84.94.104.11 120 - 140 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
4.12 120 - 140 0,5xd1 0,008 0,007 0,004 0,015 0,013 0,008 1,0xd1 1,0xd1** 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.9 60 - 80 0,25xd1 0,008 0,007 0,004 0,015 0,013 0,008 0,5xd1 0,5xd1 0,026 0,019 0,012 0,034 0,025 0,016 0,043 0,032 0,020
5.10 60 - 80 0,25xd1 0,008 0,007 0,004 0,015 0,013 0,008 0,5xd1 0,5xd1 0,026 0,019 0,012 0,034 0,025 0,016 0,043 0,032 0,020
5.11 60 - 80 0,25xd1 0,008 0,007 0,004 0,015 0,013 0,008 0,5xd1 0,5xd1 0,026 0,019 0,012 0,034 0,025 0,016 0,043 0,032 0,020
6.1 80 - 100 0,25xd1 0,008 0,007 0,004 0,015 0,013 0,008 0,5xd1 0,5xd1 0,032 0,024 0,015 0,043 0,032 0,020 0,053 0,040 0,025
6.26.36.46.5
**= With an ap of 1,5xD then multiply fz by 0,8
Cutting Data Solid Carbide End Mill MCR, short - long
Solid Carbide milling cutters
toolingcenter.com 13 / 269
13
Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
Sfzmm
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
0,077 0,057 0,036 0,10 0,08 0,05 0,13 0,10 0,06 0,14 0,11 0,07 0,15 0,12 0,08 0,16 0,14 0,10 0,19 0,16 0,12 �0,077 0,057 0,036 0,10 0,08 0,05 0,13 0,10 0,06 0,14 0,11 0,07 0,15 0,12 0,08 0,16 0,14 0,10 0,19 0,16 0,12 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,058 0,043 0,027 0,08 0,06 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,11 0,09 0,06 0,12 0,10 0,07 0,14 0,12 0,09 �0,058 0,043 0,027 0,08 0,06 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,11 0,09 0,06 0,12 0,10 0,07 0,14 0,12 0,09 �0,058 0,043 0,027 0,08 0,06 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,11 0,09 0,06 0,12 0,10 0,07 0,14 0,12 0,09 �
0,058 0,043 0,027 0,08 0,06 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,11 0,09 0,06 0,12 0,10 0,07 0,14 0,12 0,09 �0,058 0,043 0,027 0,08 0,06 0,04 0,10 0,07 0,05 0,10 0,08 0,05 0,11 0,09 0,06 0,12 0,10 0,07 0,14 0,12 0,09 �
0,090 0,066 0,042 0,12 0,09 0,06 0,15 0,11 0,07 0,16 0,13 0,08 0,18 0,14 0,10 0,19 0,16 0,11 0,22 0,18 0,14 �0,090 0,066 0,042 0,12 0,09 0,06 0,15 0,11 0,07 0,16 0,13 0,08 0,18 0,14 0,10 0,19 0,16 0,11 0,22 0,18 0,14 �0,090 0,066 0,042 0,12 0,09 0,06 0,15 0,11 0,07 0,16 0,13 0,08 0,18 0,14 0,10 0,19 0,16 0,11 0,22 0,18 0,14 �0,090 0,066 0,042 0,12 0,09 0,06 0,15 0,11 0,07 0,16 0,13 0,08 0,18 0,14 0,10 0,19 0,16 0,11 0,22 0,18 0,14 �0,077 0,057 0,036 0,10 0,08 0,05 0,13 0,10 0,06 0,14 0,11 0,07 0,15 0,12 0,08 0,16 0,14 0,10 0,19 0,16 0,12 �0,077 0,057 0,036 0,10 0,08 0,05 0,13 0,10 0,06 0,14 0,11 0,07 0,15 0,12 0,08 0,16 0,14 0,10 0,19 0,16 0,12 �0,077 0,057 0,036 0,10 0,08 0,05 0,13 0,10 0,06 0,14 0,11 0,07 0,15 0,12 0,08 0,16 0,14 0,10 0,19 0,16 0,12 �0,077 0,057 0,036 0,10 0,08 0,05 0,13 0,10 0,06 0,14 0,11 0,07 0,15 0,12 0,08 0,16 0,14 0,10 0,19 0,16 0,12 �
0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �
0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �
0,051 0,038 0,024 0,07 0,05 0,03 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,13 0,10 0,08 �0,051 0,038 0,024 0,07 0,05 0,03 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,13 0,10 0,08 �0,051 0,038 0,024 0,07 0,05 0,03 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,13 0,10 0,08 �0,064 0,047 0,030 0,09 0,06 0,04 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,16 0,13 0,10 �
Plunging angle for ramping and helical milling: Diameter 3-5=3 ° / Diameter 6-9=5° / Diameter 10-20=8°
Solid Carbide milling cutters
13 / 270 toolingcenter.com
extra
long
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 120 - 140 1xD* 0,5 x d1 0,027 0,019 0,012 0,036 0,025 0,016 0,045 0,032 0,020 0,054 0,038 0,024 0,07 0,05 0,03
1.2 120 - 140 1xD* 0,5 x d1 0,027 0,019 0,012 0,036 0,025 0,016 0,045 0,032 0,020 0,054 0,038 0,024 0,07 0,05 0,03
1.3 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.4 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.5 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.6 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.7 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.8 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.9 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.10 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.11 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.12 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.13 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.14 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.15 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
1.16 100 - 120 1xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
2.1 50 - 70 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
2.2 50 - 70 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
2.3 50 - 70 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
2.42.5 50 - 70 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
2.6 50 - 70 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
2.73.1 120 - 140 1xD* 0,5 x d1 0,034 0,024 0,015 0,045 0,032 0,020 0,056 0,040 0,025 0,067 0,047 0,030 0,09 0,06 0,04
3.2 120 - 140 1xD* 0,5 x d1 0,034 0,024 0,015 0,045 0,032 0,020 0,056 0,040 0,025 0,067 0,047 0,030 0,09 0,06 0,04
3.3 120 - 140 1xD* 0,5 x d1 0,034 0,024 0,015 0,045 0,032 0,020 0,056 0,040 0,025 0,067 0,047 0,030 0,09 0,06 0,04
3.4 120 - 140 1xD* 0,5 x d1 0,034 0,024 0,015 0,045 0,032 0,020 0,056 0,040 0,025 0,067 0,047 0,030 0,09 0,06 0,04
3.5 100 - 120 1xD* 0,5 x d1 0,027 0,019 0,012 0,036 0,025 0,016 0,045 0,032 0,020 0,054 0,038 0,024 0,07 0,05 0,03
3.6 100 - 120 1xD* 0,5 x d1 0,027 0,019 0,012 0,036 0,025 0,016 0,045 0,032 0,020 0,054 0,038 0,024 0,07 0,05 0,03
3.7 100 - 120 1xD* 0,5 x d1 0,027 0,019 0,012 0,036 0,025 0,016 0,045 0,032 0,020 0,054 0,038 0,024 0,07 0,05 0,03
3.8 100 - 120 1xD* 0,5 x d1 0,027 0,019 0,012 0,036 0,025 0,016 0,045 0,032 0,020 0,054 0,038 0,024 0,07 0,05 0,03
4.14.24.34.44.54.6 120 - 140 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
4.7 120 - 140 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
4.84.94.104.11 120 - 140 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
4.12 120 - 140 1xD* 0,5 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.9 60 - 80 0,5xD* 0,25 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
5.10 60 - 80 0,5xD* 0,25 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
5.11 60 - 80 0,5xD* 0,25 x d1 0,020 0,014 0,009 0,027 0,019 0,012 0,034 0,024 0,015 0,040 0,028 0,018 0,05 0,04 0,02
6.1 80 - 100 0,5xD* 0,5 x d1 0,025 0,017 0,011 0,031 0,022 0,014 0,040 0,028 0,018 0,047 0,033 0,021 0,06 0,04 0,03
6.26.36.46.5
* = Trimming and trochoidal slot milling
Cutting Data Solid Carbide End Mill MCR, extra long
Solid Carbide milling cutters
toolingcenter.com 13 / 271
13
Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,14 0,11 0,08 �1.2 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,14 0,11 0,08 �1.3 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.4 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.5 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.6 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.7 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.8 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.9 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �
1.10 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.11 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.12 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.13 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.14 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.15 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �1.16 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �2.1 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �2.2 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �2.3 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �2.42.5 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �2.6 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �2.73.1 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,17 0,14 0,10 �3.2 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,17 0,14 0,10 �3.3 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,17 0,14 0,10 �3.4 0,11 0,08 0,05 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,11 0,08 0,17 0,14 0,10 �3.5 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,14 0,11 0,08 �3.6 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,14 0,11 0,08 �3.7 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,14 0,11 0,08 �3.8 0,09 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,06 0,14 0,11 0,08 �4.14.24.34.44.54.6 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �4.7 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �4.84.94.104.11 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �4.12 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.9 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �5.10 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �5.11 0,07 0,05 0,03 0,07 0,06 0,04 0,08 0,06 0,04 0,08 0,07 0,05 0,10 0,08 0,06 �6.1 0,08 0,06 0,04 0,08 0,07 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,12 0,09 0,07 �6.26.36.46.5
Plunging angle for ramping and helical milling: Diameter 3-5=3 ° / Diameter 6-9=5° / Diameter 10-20=8°
Solid Carbide milling cutters
13 / 272 toolingcenter.com
Feedrates for extra short and short holder
Cor
rect
ion
fact
or v
c, a
p an
d fz
M
ediu
m H
olde
r
Cor
rect
ion
fact
or v
c, a
p an
d fz
Lo
ng H
olde
r
Cor
rect
ion
fact
or v
c, a
p an
d fz
Ex
tra L
ong
Hol
der
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Shou
lder
mill
ing
cutte
r
Indexn max[1/min]
Vc(m/min.)
apmax [mm]Vc
(m/min.)
apmax [mm]Vc
(m/min.)
apmax [mm]6 6 3 8 8 4 8 8 4
fz mm fz mm fz mm4.1 0,9 0,7* 0,6*
1800
0
300-450 0,08 0,08 0,08 350-550 0,08 0,08 0,08 400-600 0,08 0,08 0,08
4.2 0,9 0,7* 0,6* 300-450 0,08 0,08 0,08 350-550 0,08 0,08 0,08 400-600 0,08 0,08 0,08
4.3 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.4 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.5 0,9 0,7* 0,6* 300-450 0,20 0,20 0,10 350-550 0,20 0,20 0,10 400-600 0,20 0,20 0,10
4.6 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.7 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.8 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.9 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.10 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.11 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.12 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.13 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.14 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.15 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.16 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.17 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.18 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.19 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
Multichange Cutting Data, PCD Milling Heads
apmax [mm] apmax [mm] apmax [mm]6 6 3 8 8 3 8 8 4
Bal
l nos
e en
d m
illin
g cu
tters 4.1 0,9 0,7* 0,6*
1800
0
300-450 0,08 0,08 0,08 350-550 0,08 0,08 0,08 400-600 0,08 0,08 0,08
4.2 0,9 0,7* 0,6* 300-450 0,08 0,08 0,08 350-550 0,08 0,08 0,08 400-600 0,08 0,08 0,08
4.3 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.4 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.5 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.6 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.7 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.8 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.9 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.10 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.11 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.12 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.13 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.14 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.15 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.16 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.17 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.18 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
4.19 0,9 0,7* 0,6* 300-450 0,20 0,20 0,16 350-550 0,20 0,20 0,16 400-600 0,20 0,20 0,16
apmax [mm] apmax [mm] apmax [mm]6 6 3 8 8 3 8 8 4
Toru
s en
d m
illin
g cu
tters
4.1 0,9 0,7* 0,6*
1800
0
300-450 0,08 0,08 0,08 350-550 0,08 0,08 0,08 400-600 0,08 0,08 0,08
4.2 0,9 0,7* 0,6* 300-450 0,08 0,08 0,08 350-550 0,08 0,08 0,08 400-600 0,08 0,08 0,08
4.3 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.4 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.5 0,9 0,7* 0,6* 300-450 0,20 0,20 0,10 350-550 0,20 0,20 0,10 400-600 0,20 0,20 0,10
4.6 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.7 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.8 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.9 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.10 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.11 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.12 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.13 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.14 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.15 0,9 0,7* 0,6* 300-450 0,16 0,16 0,08 350-550 0,16 0,16 0,08 400-600 0,16 0,16 0,08
4.16 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.17 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.18 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
4.19 0,9 0,7* 0,6* 300-450 0,24 0,24 0,12 350-550 0,24 0,24 0,12 400-600 0,24 0,24 0,12
*= Edge Milling and Trochoidal Milling
All tools should be mounted using torque wrench. In unstable applications, the machining parameters can be reduced.
Solid Carbide milling cutters
toolingcenter.com 13 / 273
13
Ø d1 = 16 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
1st choice suitable
Emul
sion
Com
pres
sed
air
MM
SIndexVc
(m/min.)
apmax [mm]8 8 4
fz mm4.1 450-700 0,08 0,08 0,08
4.2 450-700 0,08 0,08 0,08
4.3 450-700 0,16 0,16 0,08
4.4 450-700 0,16 0,16 0,08
4.5 450-700 0,20 0,20 0,10
4.6 450-700 0,24 0,24 0,12
4.7 450-700 0,16 0,16 0,08
4.8 450-700 0,24 0,24 0,12
4.9 450-700 0,24 0,24 0,12
4.10 450-700 0,24 0,24 0,12
4.11 450-700 0,16 0,16 0,08
4.12 450-700 0,16 0,16 0,08
4.13 450-700 0,16 0,16 0,08
4.14 450-700 0,16 0,16 0,08
4.15 450-700 0,16 0,16 0,08
4.16 450-700 0,24 0,24 0,12
4.17 450-700 0,24 0,24 0,12
4.18 450-700 0,24 0,24 0,12
4.19 450-700 0,24 0,24 0,12
apmax [mm]8 8 5
4.1 450-650 0,08 0,08 0,08
4.2 450-650 0,08 0,08 0,08
4.3 450-650 0,16 0,16 0,08
4.4 450-650 0,20 0,20 0,16
4.5 450-650 0,20 0,20 0,16
4.6 450-650 0,20 0,20 0,16
4.7 450-650 0,16 0,16 0,08
4.8 450-650 0,20 0,20 0,16
4.9 450-650 0,20 0,20 0,16
4.10 450-650 0,20 0,20 0,16
4.11 450-650 0,20 0,20 0,16
4.12 450-650 0,20 0,20 0,16
4.13 450-650 0,16 0,16 0,08
4.14 450-650 0,16 0,16 0,08
4.15 450-650 0,20 0,20 0,16
4.16 450-650 0,20 0,20 0,16
4.17 450-650 0,20 0,20 0,16
4.18 450-650 0,20 0,20 0,16
4.19 450-650 0,20 0,20 0,16
4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.19
Solid Carbide milling cutters
13 / 274 toolingcenter.com
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mmapmax 5,2 mm 4,4 mm 3,6 mm 6,5 mm 5,5 mm 4,5 mm 7,8 mm 6,6 mm 5,4 mm 10,4 mm 8,8 mm 7,2 mm 13 mm 11 mm 9 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Index Vc(m/min.)
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7* 0,6* 180 0,05 0,04 0,03 0,07 0,06 0,04 0,08 0,07 0,05 0,11 0,09 0,07 0,14 0,12 0,08 � � �
1.2 0,9 0,7* 0,6* 200 0,06 0,05 0,03 0,08 0,07 0,05 0,09 0,08 0,06 0,13 0,11 0,08 0,16 0,14 0,10 � � �
1.3 0,9 0,7* 0,6* 180 0,05 0,04 0,03 0,07 0,06 0,04 0,08 0,07 0,05 0,11 0,09 0,07 0,14 0,12 0,08 � � �
1.4 0,9 0,7* 0,6* 150 0,04 0,04 0,03 0,06 0,05 0,04 0,07 0,06 0,04 0,10 0,08 0,06 0,13 0,11 0,08 � � �
1.5 0,9 0,7* 0,6* 160 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,12 0,10 0,07 0,15 0,13 0,09 � � �
1.6 0,9 0,7* 0,6* 140 0,04 0,04 0,03 0,06 0,05 0,04 0,07 0,06 0,04 0,10 0,08 0,06 0,13 0,11 0,08 � � �
1.7 0,9 0,7* 0,6* 140 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,12 0,10 0,07 0,15 0,13 0,09 � � �
1.8 0,9 0,7* 0,6* 100 0,04 0,03 0,02 0,05 0,04 0,03 0,06 0,05 0,03 0,08 0,07 0,05 0,10 0,09 0,06 � � �
1.9 0,9 0,7* 0,6* 140 0,05 0,04 0,03 0,07 0,06 0,04 0,08 0,07 0,05 0,11 0,09 0,07 0,14 0,12 0,08 � � �
1.10 0,9 0,7* 0,6* 120 0,04 0,03 0,02 0,05 0,04 0,03 0,06 0,05 0,03 0,08 0,07 0,05 0,10 0,09 0,06 � � �
1.11 0,9 0,7* 0,6* 100 0,03 0,03 0,02 0,04 0,04 0,03 0,05 0,04 0,03 0,07 0,06 0,04 0,09 0,08 0,06 � � �
1.12 0,9 0,7* 0,6* 90 0,04 0,03 0,02 0,05 0,04 0,03 0,06 0,05 0,03 0,08 0,07 0,05 0,10 0,09 0,06 � � �
1.13 0,9 0,7* 0,6* 70 0,04 0,03 0,02 0,05 0,04 0,03 0,06 0,05 0,03 0,08 0,07 0,05 0,10 0,09 0,06 � � �
1.141.15 0,9 0,7* 0,6* 80 0,03 0,03 0,02 0,04 0,04 0,03 0,05 0,04 0,03 0,07 0,06 0,04 0,09 0,08 0,06 � � �
1.16 0,9 0,7* 0,6* 80 0,03 0,03 0,02 0,04 0,04 0,03 0,05 0,04 0,03 0,07 0,06 0,04 0,09 0,08 0,06 � � �
2.1 0,9 0,7* 0,6* 60 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 0,12 0,10 �
2.2 0,9 0,7* 0,6* 60 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,09 �
2.3 0,9 0,7* 0,6* 50 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,09 �
2.4 0,9 0,7* 0,6* 40 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,08 0,07 �
2.5 0,9 0,7* 0,6* 50 0,03 0,03 0,04 0,04 0,05 0,04 0,07 0,06 0,09 0,08 �
2.6 0,9 0,7* 0,6* 50 0,03 0,03 0,04 0,04 0,05 0,04 0,07 0,06 0,09 0,08 �
2.7 0,9 0,7* 0,6* 40 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,08 0,07 �
3.1 0,9 0,7* 0,6* 150 0,06 0,05 0,03 0,08 0,07 0,05 0,09 0,08 0,06 0,13 0,11 0,08 0,16 0,14 0,10 �
3.2 0,9 0,7* 0,6* 120 0,05 0,04 0,03 0,07 0,06 0,04 0,08 0,07 0,05 0,11 0,09 0,07 0,14 0,12 0,08 �
3.3 0,9 0,7* 0,6* 140 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,12 0,10 0,07 0,15 0,13 0,09 �
3.4 0,9 0,7* 0,6* 120 0,04 0,04 0,03 0,06 0,05 0,04 0,07 0,06 0,04 0,10 0,08 0,06 0,13 0,11 0,08 �
3.5 0,9 0,7* 0,6* 120 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,12 0,10 0,07 0,15 0,13 0,09 �
3.6 0,9 0,7* 0,6* 100 0,05 0,04 0,03 0,07 0,06 0,04 0,08 0,07 0,05 0,11 0,09 0,07 0,14 0,12 0,08 �
3.7 0,9 0,7* 0,6* 120 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,12 0,10 0,07 0,15 0,13 0,09 �
3.8 0,9 0,7* 0,6* 100 0,04 0,04 0,03 0,06 0,05 0,04 0,07 0,06 0,04 0,10 0,08 0,06 0,13 0,11 0,08 �
4.14.24.34.44.54.64.74.84.94.10 0,9 0,7* 0,6* 160 0,03 0,03 0,02 0,04 0,04 0,03 0,05 0,04 0,03 0,07 0,06 0,04 0,09 0,08 0,06 � �
4.11 0,9 0,7* 0,6* 220 0,06 0,05 0,03 0,08 0,07 0,05 0,09 0,08 0,06 0,13 0,11 0,08 0,16 0,14 0,10 � �
4.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
* = Trimming and trochoidal slot milling
MultiChange Cutting Data, Solid Carbide End Mills Z:3 and Z:4 / 52 860 ... / 52 861 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
13
toolingcenter.com 13 / 275
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mmapmax 7,5 mm 9,4 mm 11,3 mm 15,0 mm 18,8 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
Emul
sion
Com
pres
sed
air
MM
S
Index Vc(m/min.)
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7* 0,6* 215 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,08 � � �
1.2 0,9 0,7* 0,6* 240 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 0,12 0,10 � � �
1.3 0,9 0,7* 0,6* 215 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,08 � � �
1.4 0,9 0,7* 0,6* 180 0,03 0,03 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 � � �
1.5 0,9 0,7* 0,6* 190 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,07 0,10 0,09 � � �
1.6 0,9 0,7* 0,6* 170 0,03 0,03 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 � � �
1.7 0,9 0,7* 0,6* 170 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,07 0,10 0,09 � � �
1.8 0,9 0,7* 0,6* 120 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,07 0,06 � � �
1.9 0,9 0,7* 0,6* 170 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,08 � � �
1.10 0,9 0,7* 0,6* 145 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,07 0,06 � � �
1.11 0,9 0,7* 0,6* 120 0,03 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,06 0,05 � � �
1.12 0,9 0,7* 0,6* 110 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,07 0,06 � � �
1.13 0,9 0,7* 0,6* 85 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,07 0,06 � � �
1.141.15 0,9 0,7* 0,6* 95 0,03 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,06 0,05 � � �
1.16 0,9 0,7* 0,6* 95 0,03 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,06 0,05 � � �
2.1 0,9 0,7* 0,6* 70 0,03 0,03 0,04 0,04 0,05 0,04 0,07 0,06 0,08 0,07 �
2.2 0,9 0,7* 0,6* 70 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,07 0,06 �
2.3 0,9 0,7* 0,6* 60 0,03 0,02 0,04 0,03 0,04 0,04 0,06 0,05 0,07 0,06 �
2.4 0,9 0,7* 0,6* 50 0,02 0,02 0,03 0,02 0,03 0,03 0,04 0,04 0,06 0,05 �
2.5 0,9 0,7* 0,6* 60 0,03 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,06 0,05 �
2.6 0,9 0,7* 0,6* 60 0,03 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,06 0,05 �
2.7 0,9 0,7* 0,6* 50 0,02 0,02 0,03 0,02 0,03 0,03 0,04 0,04 0,06 0,05 �
3.1 0,9 0,7* 0,6* 180 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 0,12 0,10 �
3.2 0,9 0,7* 0,6* 140 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,08 �
3.3 0,9 0,7* 0,6* 170 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,07 0,10 0,09 �
3.4 0,9 0,7* 0,6* 140 0,03 0,03 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 �
3.5 0,9 0,7* 0,6* 140 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,07 0,10 0,09 �
3.6 0,9 0,7* 0,6* 120 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,07 0,10 0,08 �
3.7 0,9 0,7* 0,6* 140 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,07 0,10 0,09 �
3.8 0,9 0,7* 0,6* 120 0,03 0,03 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 �
4.14.24.34.44.54.64.74.84.94.10 0,9 0,7* 0,6* 190 0,03 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,06 0,05 � �
4.11 0,9 0,7* 0,6* 260 0,04 0,04 0,06 0,05 0,07 0,06 0,09 0,08 0,12 0,10 � �
4.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
* = Trimming and trochoidal slot milling
MultiChange Cutting Data, Solid Carbide Roughing Cutter 52 862 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
13 / 276 toolingcenter.com
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mmapmax 7,5 mm 9,4 mm 11,3 mm 15,0 mm 18,8 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,1-0,2
x d1
ae 0,1-0,2
x d1
ae 0,1-0,2
x d1
ae 0,1-0,2
x d1
Emul
sion
Com
pres
sed
air
MM
S
Index Vc(m/min.)
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7* 0,6* 250 0,05 0,06 0,08 0,10 0,13 � � �
1.2 0,9 0,7* 0,6* 280 0,06 0,07 0,09 0,11 0,15 � � �
1.3 0,9 0,7* 0,6* 250 0,05 0,06 0,08 0,10 0,13 � � �
1.4 0,9 0,7* 0,6* 210 0,05 0,06 0,07 0,09 0,12 � � �
1.5 0,9 0,7* 0,6* 220 0,06 0,07 0,08 0,11 0,14 � � �
1.6 0,9 0,7* 0,6* 200 0,05 0,06 0,07 0,09 0,12 � � �
1.7 0,9 0,7* 0,6* 200 0,06 0,07 0,08 0,11 0,14 � � �
1.8 0,9 0,7* 0,6* 140 0,04 0,05 0,06 0,07 0,09 � � �
1.9 0,9 0,7* 0,6* 200 0,05 0,06 0,08 0,10 0,13 � � �
1.10 0,9 0,7* 0,6* 170 0,04 0,05 0,06 0,07 0,09 � � �
1.11 0,9 0,7* 0,6* 140 0,03 0,04 0,05 0,06 0,08 � � �
1.12 0,9 0,7* 0,6* 130 0,04 0,05 0,06 0,07 0,09 � � �
1.13 0,9 0,7* 0,6* 100 0,04 0,05 0,06 0,07 0,09 � � �
1.141.15 0,9 0,7* 0,6* 110 0,03 0,04 0,05 0,06 0,08 � � �
1.16 0,9 0,7* 0,6* 110 0,03 0,04 0,05 0,06 0,08 � � �
2.1 0,9 0,7* 0,6* 80 0,04 0,05 0,06 0,08 0,10 �
2.2 0,9 0,7* 0,6* 80 0,04 0,05 0,06 0,07 0,09 �
2.3 0,9 0,7* 0,6* 70 0,04 0,05 0,06 0,07 0,09 �
2.4 0,9 0,7* 0,6* 60 0,03 0,04 0,04 0,05 0,07 �
2.5 0,9 0,7* 0,6* 70 0,03 0,04 0,05 0,06 0,08 �
2.6 0,9 0,7* 0,6* 70 0,03 0,04 0,05 0,06 0,08 �
2.7 0,9 0,7* 0,6* 60 0,03 0,04 0,04 0,05 0,07 �
3.1 0,9 0,7* 0,6* 210 0,06 0,07 0,09 0,11 0,15 �
3.2 0,9 0,7* 0,6* 170 0,05 0,06 0,08 0,10 0,13 �
3.3 0,9 0,7* 0,6* 200 0,06 0,07 0,08 0,11 0,14 �
3.4 0,9 0,7* 0,6* 170 0,05 0,06 0,07 0,09 0,12 �
3.5 0,9 0,7* 0,6* 170 0,06 0,07 0,08 0,11 0,14 �
3.6 0,9 0,7* 0,6* 140 0,05 0,06 0,08 0,10 0,13 �
3.7 0,9 0,7* 0,6* 170 0,06 0,07 0,08 0,11 0,14 �
3.8 0,9 0,7* 0,6* 140 0,05 0,06 0,07 0,09 0,12 �
4.14.24.34.44.54.64.74.84.94.10 0,9 0,7* 0,6* 220 0,03 0,04 0,05 0,06 0,08 � �
4.11 0,9 0,7* 0,6* 310 0,06 0,07 0,09 0,11 0,15 � �
4.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
* = Trimming and trochoidal slot milling
MultiChange Cutting Data, Solid Carbide Finishing Cutter 52 863 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
13
toolingcenter.com 13 / 277
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mm
1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Index Vc(m/min.) apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7* 0,6* 200
0,05
0,36 0,30 0,21 0,54 0,45 0,32 0,60 0,50 0,35 0,84 0,70 0,49 1,08 0,90 0,63 � � �
1.2 0,9 0,7* 0,6* 220 0,43 0,36 0,25 0,64 0,53 0,37 0,71 0,59 0,42 0,99 0,83 0,58 1,28 1,07 0,75 � � �
1.3 0,9 0,7* 0,6* 200 0,36 0,30 0,21 0,54 0,45 0,32 0,60 0,50 0,35 0,84 0,70 0,49 1,08 0,90 0,63 � � �
1.4 0,9 0,7* 0,6* 170 0,33 0,28 0,20 0,49 0,41 0,29 0,55 0,46 0,32 0,76 0,64 0,45 0,99 0,82 0,58 � � �
1.5 0,9 0,7* 0,6* 180 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 � � �
1.6 0,9 0,7* 0,6* 150 0,33 0,28 0,20 0,49 0,41 0,29 0,55 0,46 0,32 0,76 0,64 0,45 0,99 0,82 0,58 � � �
1.7 0,9 0,7* 0,6* 150 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 � � �
1.8 0,9 0,7* 0,6* 110 0,27 0,22 0,16 0,39 0,33 0,23 0,44 0,37 0,26 0,61 0,51 0,36 0,79 0,66 0,46 � � �
1.9 0,9 0,7* 0,6* 150 0,36 0,30 0,21 0,54 0,45 0,32 0,60 0,50 0,35 0,84 0,70 0,49 1,08 0,90 0,63 � � �
1.10 0,9 0,7* 0,6* 130 0,27 0,22 0,16 0,39 0,33 0,23 0,44 0,37 0,26 0,61 0,51 0,36 0,79 0,66 0,46 � � �
1.11 0,9 0,7* 0,6* 110 0,23 0,19 0,14 0,34 0,29 0,20 0,39 0,32 0,23 0,54 0,45 0,31 0,69 0,58 0,41 � � �
1.12 0,9 0,7* 0,6* 100 0,27 0,22 0,16 0,39 0,33 0,23 0,44 0,37 0,26 0,61 0,51 0,36 0,79 0,66 0,46 � � �
1.13 0,9 0,7* 0,6* 80 0,27 0,22 0,16 0,39 0,33 0,23 0,44 0,37 0,26 0,61 0,51 0,36 0,79 0,66 0,46 � � �
1.141.15 0,9 0,7* 0,6* 90 0,23 0,19 0,14 0,34 0,29 0,20 0,39 0,32 0,23 0,54 0,45 0,31 0,69 0,58 0,41 � � �
1.16 0,9 0,7* 0,6* 90 0,23 0,19 0,14 0,34 0,29 0,20 0,39 0,32 0,23 0,54 0,45 0,31 0,69 0,58 0,41 � � �
2.1 0,9 0,7* 0,6* 70
0,025
0,45 0,37 0,26 0,66 0,55 0,39 0,74 0,62 0,43 1,03 0,86 0,60 1,33 1,11 0,78 �
2.2 0,9 0,7* 0,6* 70 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 �
2.3 0,9 0,7* 0,6* 60 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 �
2.4 0,9 0,7* 0,6* 40 0,30 0,25 0,17 0,45 0,37 0,26 0,49 0,41 0,29 0,69 0,58 0,41 0,88 0,74 0,52 �
2.5 0,9 0,7* 0,6* 60 0,34 0,29 0,20 0,52 0,43 0,30 0,57 0,48 0,34 0,81 0,67 0,47 1,03 0,86 0,60 �
2.6 0,9 0,7* 0,6* 55 0,34 0,29 0,20 0,52 0,43 0,30 0,57 0,48 0,34 0,81 0,67 0,47 1,03 0,86 0,60 �
2.7 0,9 0,7* 0,6* 40 0,30 0,25 0,17 0,45 0,37 0,26 0,49 0,41 0,29 0,69 0,58 0,41 0,88 0,74 0,52 �
3.1 0,9 0,7* 0,6* 170
0,05
0,43 0,36 0,25 0,64 0,53 0,37 0,71 0,59 0,42 0,99 0,83 0,58 1,28 1,07 0,75 �
3.2 0,9 0,7* 0,6* 130 0,36 0,30 0,21 0,54 0,45 0,32 0,60 0,50 0,35 0,84 0,70 0,49 1,08 0,90 0,63 �
3.3 0,9 0,7* 0,6* 150 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 �
3.4 0,9 0,7* 0,6* 130 0,33 0,28 0,20 0,49 0,41 0,29 0,55 0,46 0,32 0,76 0,64 0,45 0,99 0,82 0,58 �
3.5 0,9 0,7* 0,6* 130 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 �
3.6 0,9 0,7* 0,6* 110 0,36 0,30 0,21 0,54 0,45 0,32 0,60 0,50 0,35 0,84 0,70 0,49 1,08 0,90 0,63 �
3.7 0,9 0,7* 0,6* 130 0,39 0,33 0,23 0,59 0,49 0,35 0,66 0,55 0,38 0,92 0,77 0,54 1,18 0,98 0,69 �
3.8 0,9 0,7* 0,6* 110 0,33 0,28 0,20 0,49 0,41 0,29 0,55 0,46 0,32 0,76 0,64 0,45 0,99 0,82 0,58 �
4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.1 0,9 0,7* 0,6* 70
0,0250,20 0,30 0,33 0,46 0,49 �
6.2 0,9 0,7* 0,6* 60 0,17 0,25 0,28 0,38 0,41 �
6.36.46.5
* = Trimming and trochoidal slot milling
MultiChange Cutting Data, HFC Cutter 52 864 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
13 / 278 toolingcenter.com
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der
Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mmapmax 4,8 mm 1,6 mm 0,8 mm 5,6 mm 2,0 mm 1,0 mm 6,8 mm 2,4 mm 1,2 mm 9,0 mm 3,2 mm 1,6 mm 11,3 mm 4,0 mm 2,0 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Index Vc(m/min.)
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7* 0,6* 180 0,07 0,06 0,05 0,07 0,06 0,05 0,12 0,10 0,08 0,15 0,12 0,10 0,18 0,15 0,12 � � �
1.2 0,9 0,7* 0,6* 200 0,08 0,07 0,05 0,08 0,07 0,05 0,13 0,11 0,09 0,17 0,14 0,11 0,21 0,17 0,14 � � �
1.3 0,9 0,7* 0,6* 180 0,07 0,06 0,05 0,07 0,06 0,05 0,12 0,10 0,08 0,15 0,12 0,10 0,18 0,15 0,12 � � �
1.4 0,9 0,7* 0,6* 150 0,06 0,05 0,04 0,06 0,05 0,04 0,10 0,09 0,07 0,13 0,11 0,09 0,16 0,13 0,11 � � �
1.5 0,9 0,7* 0,6* 160 0,07 0,06 0,05 0,07 0,06 0,05 0,13 0,11 0,09 0,16 0,13 0,11 0,19 0,16 0,13 � � �
1.6 0,9 0,7* 0,6* 140 0,06 0,05 0,04 0,06 0,05 0,04 0,10 0,09 0,07 0,13 0,11 0,09 0,16 0,13 0,11 � � �
1.7 0,9 0,7* 0,6* 140 0,07 0,06 0,05 0,07 0,06 0,05 0,13 0,11 0,09 0,16 0,13 0,11 0,19 0,16 0,13 � � �
1.8 0,9 0,7* 0,6* 100 0,05 0,04 0,03 0,05 0,04 0,03 0,09 0,07 0,06 0,10 0,09 0,07 0,13 0,11 0,09 � � �
1.9 0,9 0,7* 0,6* 140 0,07 0,06 0,05 0,07 0,06 0,05 0,12 0,10 0,08 0,15 0,12 0,10 0,18 0,15 0,12 � � �
1.10 0,9 0,7* 0,6* 120 0,05 0,04 0,03 0,05 0,04 0,03 0,09 0,07 0,06 0,10 0,09 0,07 0,13 0,11 0,09 � � �
1.11 0,9 0,7* 0,6* 100 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 � � �
1.12 0,9 0,7* 0,6* 90 0,05 0,04 0,03 0,05 0,04 0,03 0,09 0,07 0,06 0,10 0,09 0,07 0,13 0,11 0,09 � � �
1.13 0,9 0,7* 0,6* 70 0,05 0,04 0,03 0,05 0,04 0,03 0,09 0,07 0,06 0,10 0,09 0,07 0,13 0,11 0,09 � � �
1.141.15 0,9 0,7* 0,6* 80 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 � � �
1.16 0,9 0,7* 0,6* 80 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 � � �
2.1 0,9 0,7* 0,6* 60 0,06 0,05 0,04 0,06 0,05 0,04 0,10 0,08 0,07 0,12 0,10 0,08 0,15 0,12 0,10 �
2.2 0,9 0,7* 0,6* 60 0,05 0,04 0,03 0,05 0,04 0,03 0,09 0,07 0,06 0,10 0,09 0,07 0,13 0,11 0,09 �
2.3 0,9 0,7* 0,6* 50 0,05 0,04 0,03 0,05 0,04 0,03 0,09 0,07 0,06 0,10 0,09 0,07 0,13 0,11 0,09 �
2.4 0,9 0,7* 0,6* 40 0,04 0,03 0,03 0,04 0,03 0,03 0,06 0,05 0,04 0,08 0,07 0,05 0,10 0,08 0,07 �
2.5 0,9 0,7* 0,6* 50 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 �
2.6 0,9 0,7* 0,6* 50 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 �
2.7 0,9 0,7* 0,6* 40 0,04 0,03 0,03 0,04 0,03 0,03 0,06 0,05 0,04 0,08 0,07 0,05 0,10 0,08 0,07 �
3.1 0,9 0,7* 0,6* 150 0,08 0,07 0,05 0,08 0,07 0,05 0,13 0,11 0,09 0,17 0,14 0,11 0,21 0,17 0,14 �
3.2 0,9 0,7* 0,6* 120 0,07 0,06 0,05 0,07 0,06 0,05 0,12 0,10 0,08 0,15 0,12 0,10 0,18 0,15 0,12 �
3.3 0,9 0,7* 0,6* 140 0,07 0,06 0,05 0,07 0,06 0,05 0,13 0,11 0,09 0,16 0,13 0,11 0,19 0,16 0,13 �
3.4 0,9 0,7* 0,6* 120 0,06 0,05 0,04 0,06 0,05 0,04 0,10 0,09 0,07 0,13 0,11 0,09 0,16 0,13 0,11 �
3.5 0,9 0,7* 0,6* 120 0,07 0,06 0,05 0,07 0,06 0,05 0,13 0,11 0,09 0,16 0,13 0,11 0,19 0,16 0,13 �
3.6 0,9 0,7* 0,6* 100 0,07 0,06 0,05 0,07 0,06 0,05 0,12 0,10 0,08 0,15 0,12 0,10 0,18 0,15 0,12 �
3.7 0,9 0,7* 0,6* 120 0,07 0,06 0,05 0,07 0,06 0,05 0,13 0,11 0,09 0,16 0,13 0,11 0,19 0,16 0,13 �
3.8 0,9 0,7* 0,6* 100 0,06 0,05 0,04 0,06 0,05 0,04 0,10 0,09 0,07 0,13 0,11 0,09 0,16 0,13 0,11 �
4.1 0,9 0,7* 0,6* 500 0,12 0,10 0,08 0,12 0,10 0,08 0,20 0,17 0,13 0,25 0,21 0,17 0,30 0,25 0,20 � �
4.2 0,9 0,7* 0,6* 450 0,12 0,10 0,08 0,12 0,10 0,08 0,20 0,17 0,13 0,25 0,21 0,17 0,30 0,25 0,20 � �
4.3 0,9 0,7* 0,6* 380 0,11 0,09 0,07 0,11 0,09 0,07 0,19 0,16 0,13 0,24 0,20 0,16 0,28 0,24 0,19 � �
4.4 0,9 0,7* 0,6* 300 0,10 0,09 0,07 0,10 0,09 0,07 0,18 0,15 0,12 0,22 0,19 0,15 0,27 0,23 0,18 � �
4.5 0,9 0,7* 0,6* 150 0,09 0,08 0,06 0,09 0,08 0,06 0,16 0,13 0,11 0,20 0,17 0,13 0,24 0,20 0,16 � �
4.6 0,9 0,7* 0,6* 250 0,07 0,06 0,05 0,07 0,06 0,05 0,13 0,11 0,09 0,16 0,13 0,11 0,19 0,16 0,13 � �
4.7 0,9 0,7* 0,6* 200 0,07 0,06 0,05 0,07 0,06 0,05 0,12 0,10 0,08 0,15 0,12 0,10 0,18 0,15 0,12 � �
4.8 0,9 0,7* 0,6* 220 0,06 0,05 0,04 0,06 0,05 0,04 0,10 0,08 0,07 0,12 0,10 0,08 0,15 0,12 0,10 � �
4.9 0,9 0,7* 0,6* 200 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 � �
4.10 0,9 0,7* 0,6* 160 0,04 0,04 0,03 0,04 0,04 0,03 0,07 0,06 0,05 0,09 0,08 0,06 0,11 0,09 0,07 � �
4.11 0,9 0,7* 0,6* 220 0,08 0,07 0,05 0,08 0,07 0,05 0,13 0,11 0,09 0,17 0,14 0,11 0,21 0,17 0,14 � �
4.12 0,9 0,7* 0,6* 190 0,08 0,07 0,05 0,08 0,07 0,05 0,13 0,11 0,09 0,17 0,14 0,11 0,21 0,17 0,14 � �
4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
* = Trimming and trochoidal slot milling
MultiChange Cutting Data, Solid Carbide Ball Nosed and Torus Cutter 52 866 ... / 52 865 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
toolingcenter.com 13 / 279
13
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mm
1st choice suitable
ae/ap = 0,04 ae/ap = 0,05 ae/ap = 0,06 ae/ap = 0,08 ae/ap = 0,10
Emul
sion
Com
pres
sed
air
MM
S
Index Vc(m/min.)
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7* 0,6* 540 0,08 0,09 0,08 0,11 0,13 � � �
1.2 0,9 0,7* 0,6* 600 0,10 0,11 0,10 0,13 0,16 � � �
1.3 0,9 0,7* 0,6* 540 0,08 0,09 0,08 0,11 0,13 � � �
1.4 0,9 0,7* 0,6* 450 0,08 0,08 0,08 0,10 0,12 � � �
1.5 0,9 0,7* 0,6* 480 0,09 0,10 0,09 0,12 0,14 � � �
1.6 0,9 0,7* 0,6* 420 0,08 0,08 0,08 0,10 0,12 � � �
1.7 0,9 0,7* 0,6* 420 0,09 0,10 0,09 0,12 0,14 � � �
1.8 0,9 0,7* 0,6* 300 0,06 0,07 0,06 0,08 0,10 � � �
1.9 0,9 0,7* 0,6* 420 0,08 0,09 0,08 0,11 0,13 � � �
1.10 0,9 0,7* 0,6* 360 0,06 0,07 0,06 0,08 0,10 � � �
1.11 0,9 0,7* 0,6* 300 0,05 0,06 0,05 0,07 0,09 � � �
1.12 0,9 0,7* 0,6* 270 0,06 0,07 0,06 0,08 0,10 � � �
1.13 0,9 0,7* 0,6* 210 0,06 0,07 0,06 0,08 0,10 � � �
1.141.15 0,9 0,7* 0,6* 240 0,05 0,06 0,05 0,07 0,09 � � �
1.16 0,9 0,7* 0,6* 240 0,05 0,06 0,05 0,07 0,09 � � �
2.1 0,9 0,7* 0,6* 180 0,07 0,08 0,07 0,09 0,11 �
2.2 0,9 0,7* 0,6* 180 0,06 0,07 0,06 0,08 0,10 �
2.3 0,9 0,7* 0,6* 150 0,06 0,07 0,06 0,08 0,10 �
2.4 0,9 0,7* 0,6* 120 0,05 0,05 0,05 0,06 0,07 �
2.5 0,9 0,7* 0,6* 150 0,05 0,06 0,05 0,07 0,09 �
2.6 0,9 0,7* 0,6* 150 0,05 0,06 0,05 0,07 0,09 �
2.7 0,9 0,7* 0,6* 120 0,05 0,05 0,05 0,06 0,07 �
3.1 0,9 0,7* 0,6* 450 0,10 0,11 0,10 0,13 0,16 �
3.2 0,9 0,7* 0,6* 360 0,08 0,09 0,08 0,11 0,13 �
3.3 0,9 0,7* 0,6* 420 0,09 0,10 0,09 0,12 0,14 �
3.4 0,9 0,7* 0,6* 360 0,08 0,08 0,08 0,10 0,12 �
3.5 0,9 0,7* 0,6* 360 0,09 0,10 0,09 0,12 0,14 �
3.6 0,9 0,7* 0,6* 300 0,08 0,09 0,08 0,11 0,13 �
3.7 0,9 0,7* 0,6* 360 0,09 0,10 0,09 0,12 0,14 �
3.8 0,9 0,7* 0,6* 300 0,08 0,08 0,08 0,10 0,12 �
4.1 0,9 0,7* 0,6* 1500 0,14 0,16 0,14 0,19 0,23 � �
4.2 0,9 0,7* 0,6* 1350 0,14 0,16 0,14 0,19 0,23 � �
4.3 0,9 0,7* 0,6* 1140 0,13 0,15 0,13 0,18 0,22 � �
4.4 0,9 0,7* 0,6* 900 0,13 0,14 0,13 0,17 0,20 � �
4.5 0,9 0,7* 0,6* 450 0,11 0,13 0,11 0,15 0,18 � �
4.6 0,9 0,7* 0,6* 750 0,09 0,10 0,09 0,12 0,14 � �
4.7 0,9 0,7* 0,6* 600 0,08 0,09 0,08 0,11 0,13 � �
4.8 0,9 0,7* 0,6* 660 0,07 0,08 0,07 0,09 0,11 � �
4.9 0,9 0,7* 0,6* 600 0,05 0,06 0,05 0,07 0,09 � �
4.10 0,9 0,7* 0,6* 480 0,05 0,06 0,05 0,07 0,09 � �
4.11 0,9 0,7* 0,6* 660 0,10 0,11 0,10 0,13 0,16 � �
4.12 0,9 0,7* 0,6* 570 0,10 0,11 0,10 0,13 0,16 � �
4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
* = Trimming and trochoidal slot milling
Multichange-cutting data, solid carbide-ball nosed-torus cutter, HSC machining 52 866 ... / 52 865 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
13 / 280 toolingcenter.com
Feedrates for extra short and short holder
Cor
rect
ion
fact
or fz
and
Vc
Med
ium
Hol
der
Cor
rect
ion
fact
or fz
and
Vc
Lon
g H
olde
r
Cor
rect
ion
fact
or fz
and
Vc
Ext
ra L
ong
Hol
der
Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1 = 20 mmapmax 52 867 ... 5,0 mm 6,0 mm 4,8 mm 6,0 mm 1st choice suitable
apmax 52 868 ... 1,25 mm 1,5 mm 2,0 mm 2,5 mm
Emul
sion
Com
pres
sed
air
MM
S
ae 0,1-0,2 x d1
ae 0,1-0,2 x d1
ae 0,1-0,2 x d1
ae 0,1-0,2 x d1
Index Vc(m/min.)
fzmm
fzmm
fzmm
fzmm
1.1 0,9 0,7 0,6 200 0,07 0,09 0,12 0,14 � � �
1.2 0,9 0,7 0,6 220 0,09 0,11 0,14 0,17 � � �
1.3 0,9 0,7 0,6 200 0,07 0,09 0,12 0,17 � � �
1.4 0,9 0,7 0,6 170 0,07 0,08 0,11 0,15 � � �
1.5 0,9 0,7 0,6 180 0,08 0,10 0,13 0,17 � � �
1.6 0,9 0,7 0,6 150 0,07 0,08 0,11 0,15 � � �
1.7 0,9 0,7 0,6 150 0,08 0,10 0,13 0,17 � � �
1.8 0,9 0,7 0,6 110 0,05 0,07 0,09 0,12 � � �
1.9 0,9 0,7 0,6 150 0,07 0,09 0,12 0,12 � � �
1.10 0,9 0,7 0,6 130 0,05 0,07 0,09 0,09 � � �
1.11 0,9 0,7 0,6 110 0,05 0,06 0,08 0,06 � � �
1.12 0,9 0,7 0,6 100 0,05 0,07 0,09 0,04 � � �
1.13 0,9 0,7 0,6 80 0,05 0,07 0,09 0,03 � � �
1.141.15 0,9 0,7 0,6 90 0,05 0,06 0,08 0,09 � � �
1.16 0,9 0,7 0,6 90 0,05 0,06 0,08 0,09 � � �
2.1 0,9 0,7 0,6 70 0,06 0,08 0,10 0,12 �
2.2 0,9 0,7 0,6 70 0,05 0,07 0,09 0,11 �
2.3 0,9 0,7 0,6 60 0,05 0,07 0,09 0,11 �
2.4 0,9 0,7 0,6 40 0,04 0,05 0,07 0,08 �
2.5 0,9 0,7 0,6 60 0,05 0,06 0,08 0,09 �
2.6 0,9 0,7 0,6 60 0,05 0,06 0,08 0,09 �
2.7 0,9 0,7 0,6 40 0,04 0,05 0,07 0,08 �
3.1 0,9 0,7 0,6 170 0,09 0,11 0,14 0,17 �
3.2 0,9 0,7 0,6 130 0,07 0,09 0,12 0,15 �
3.3 0,9 0,7 0,6 150 0,08 0,10 0,13 0,16 �
3.4 0,9 0,7 0,6 130 0,07 0,08 0,11 0,13 �
3.5 0,9 0,7 0,6 130 0,08 0,10 0,13 0,16 �
3.6 0,9 0,7 0,6 110 0,07 0,09 0,12 0,15 �
3.7 0,9 0,7 0,6 130 0,08 0,10 0,13 0,16 �
3.8 0,9 0,7 0,6 110 0,07 0,08 0,11 0,13 �
4.1 0,9 0,7 0,6 550 0,12 0,16 0,21 0,25 � �
4.2 0,9 0,7 0,6 500 0,12 0,16 0,21 0,25 � �
4.3 0,9 0,7 0,6 420 0,12 0,15 0,20 0,24 � �
4.4 0,9 0,7 0,6 330 0,11 0,14 0,19 0,23 � �
4.5 0,9 0,7 0,6 170 0,10 0,13 0,17 0,20 � �
4.6 0,9 0,7 0,6 280 0,08 0,10 0,13 0,16 � �
4.7 0,9 0,7 0,6 220 0,07 0,09 0,12 0,15 � �
4.8 0,9 0,7 0,6 240 0,06 0,08 0,10 0,12 � �
4.9 0,9 0,7 0,6 220 0,05 0,06 0,08 0,09 � �
4.10 0,9 0,7 0,6 180 0,05 0,06 0,08 0,09 � �
4.11 0,9 0,7 0,6 240 0,09 0,11 0,14 0,17 � �
4.12 0,9 0,7 0,6 210 0,09 0,11 0,14 0,17 � �
4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
MultiChange Cutting Data, Solid Carbide Deburring Cutter 52 867 ... / 52 868 ...
For unstable applications, the cutting data can be reduced.
Solid Carbide milling cutters
toolingcenter.com 13 / 281
13
Cutting data table for solid carbide roughing cutters type ACR
MaterialStrength Material
numberMaterial
designationMaterial number
Material designation
Material number
Material designation(N/mm²)
N
4.1 Aluminium non alloyed, low alloy ≤ 0,5 % Si 75 - 215 3.0255 Al99,5 3.3315 AlMg1 3.3206 AlMgSi0,5 (F13-F22)
4.2 Aluminium wrought alloys, low alloy ≤ 1 % Si 180 - 310
3.3535 AlMg3 3.3206 AlMgSi0,5 (F25) 3.3527 AlMg2Mn0,8
3.3210 AlMgSi0,7 3.2315 AlMgSi1 3.3211 AlMg1SiCu
4.3 Aluminium wrought alloys, low alloy ≤ 5 % Si 270 - 530
3.3547 AlMg4,5Mn 3.1355 AlCuMg2 3.4335 AlZn4,5Mg1
3.4345 AlZnMgCu0,5 3.1325 AlCuMg1 3.4365 AlZnMgCu1,5
Ø d1 (mm): 6,0 8,0 10,0 12,0 16,0 20,0 25,0
Emul
sion
MM
S
Vc (m/min.) fz fz fz fz fz fz fz
≤ Ø 10 mm > Ø 10 mm(mm) (mm) (mm) (mm) (mm) (mm) (mm)
N
4.1 375 450 0,07 0,09 0,1 0,12 0,14 0,17 0,19
4.2 560 675 0,08 0,1 0,11 0,12 0,15 0,17 0,21
4.3 490 600 0,07 0,09 0,1 0,11 0,13 0,15 0,18
ae = 1 x d1 a
p = 0,5 x d1 Conventional machining
Ø d1
ae = 1 x d1
a p =
0,5
x d
1N
4.1 250 300 0,05 0,06 0,07 0,15 0,1 0,12 0,14
4.2 375 450 0,07 0,08 0,13 0,09 0,12 0,14 0,17
4.3 330 400 0,06 0,07 0,12 0,08 0,1 0,12 0,18
ae = 1 x d1 a
p = 1 x d1 HPC Machining
Ø d1
ap = 1 x d1
ae = 1 x d1
N
4.1 600 720 0,09 0,11 0,13 0,15 0,18 0,21 0,25
4.2 840 1000 0,1 0,12 0,13 0,15 0,18 0,21 0,26
4.3 730 900 0,09 0,1 0,12 0,14 0,17 0,19 0,23
ae = 05 x d1 a
p = 1 x d1 Peripheral milling
Ø d1
ae = 0,4 / 0,6 x d1
ap = 1 x d1
Coolant
= 1st choice
= suitableOptimal results obtained with coolant pressure between 40 - 80 bar.
Solid Carbide milling cutters
13 / 282 toolingcenter.com
Ti 1000
Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm
Full slot milling Contour milling fz (mm) fz (mm) fz (mm) fz (mm)
Indexvc vc
(m/min.) (m/min.)
1.1 150 - 170 170 - 200 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.2 170 - 190 190 - 220 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.3 140 - 170 170 - 190 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.4 100 - 140 140 - 180 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.5 140 - 170 170 - 190 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.6 120 - 140 140 - 160 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.7 100 - 140 140 - 170 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.8 100 - 120 120 - 160 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.9 150 - 170 170 - 200 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.101.111.12 140 - 170 170 - 190 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.131.141.15 80 - 120 120 - 150 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,071.16 80 - 120 120 - 150 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,072.1 45 - 65 65 - 85 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,062.2 45 - 65 65 - 85 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,062.3 30 - 50 45 - 60 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,062.4 25 - 40 40 - 50 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,062.5 40 - 60 60 - 85 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,062.6 50 -70 70 - 90 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,062.73.1 100 - 130 130 - 150 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.2 100 - 120 120 - 140 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.3 100 - 120 120 - 140 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.4 80 - 100 100 - 120 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.5 100 - 120 120 - 140 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.6 80 - 100 100 - 120 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.7 100 - 120 120 - 140 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,073.8 80 - 100 100 - 120 0,028 0,03 0,04 0,05 0,05 0,06 0,06 0,074.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.1 30 -40 40 -50 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,065.25.35.45.55.65.75.85.95.10 35 - 50 50 - 60 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,065.11 30 - 40 40 - 50 0,02 0,03 0,03 0,04 0,04 0,05 0,05 0,066.16.26.36.46.5
Cutting data for solid carbide roughing cutter 52 338 ... / 52 339 ... / 52 342 ... / 52 343 ...
Solid Carbide milling cutters
13
toolingcenter.com 13 / 283
Ti 1000
Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm Ø d1 = 25 mm
Emul
sion
Com
pres
sed
air
MM
S
fz (mm) fz (mm) fz (mm) fz (mm) fz (mm)
Index
1.1 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.2 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.3 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.4 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.5 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.6 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.7 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.8 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.9 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.101.111.12 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.131.141.15 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �1.16 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �2.1 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �2.2 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �2.3 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �2.4 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �2.5 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �2.6 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �2.73.1 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.2 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.3 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.4 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.5 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.6 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.7 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �3.8 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,12 0,1 0,12 � �4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.1 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �5.25.35.45.55.65.75.85.95.10 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �5.11 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 0,08 0,1 �6.16.26.36.46.5
With tools with internal cooling (52,338…/52,339…) the cutting speed (Vc) can be increased by 20 - 30%!
For Full slot milling the values indicated in the table are based on:
ae = 1 x d1
ap = 1 x d1
For Contour milling the values indicated in the table are based on:
ae = 0,4 x d1
ap = 1 x d1
Coolant● = 1st choice○ = suitable
Solid Carbide milling cutters
13 / 284 toolingcenter.com
Ti 1000
Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm
Full slot milling Contour milling fz (mm) fz (mm) fz (mm) fz (mm)
Indexvc vc
(m/min.) (m/min.)
1.1 140 - 160 160 - 180 0,03 0,04 0,05 0,06 0,06 0,07 0,07 0,081.2 150 - 170 170 - 190 0,03 0,04 0,05 0,06 0,06 0,07 0,07 0,081.3 150 - 170 170 - 190 0,03 0,04 0,05 0,06 0,06 0,07 0,07 0,081.4 120 - 140 140 - 170 0,03 0,03 0,04 0,05 0,05 0,06 0,06 0,071.5 140 - 170 170 - 190 0,03 0,03 0,04 0,05 0,05 0,06 0,06 0,071.6 120 - 140 140 - 170 0,02 0,02 0,02 0,03 0,03 0,04 0,04 0,051.7 110 - 140 140 - 160 0,02 0,02 0,02 0,03 0,03 0,04 0,04 0,051.81.9 140 - 160 160 - 180 0,03 0,04 0,05 0,06 0,06 0,07 0,07 0,081.101.111.12 120 - 140 140 - 160 0,02 0,02 0,02 0,03 0,03 0,04 0,04 0,051.131.141.151.162.1 70 - 100 100 - 120 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,052.2 70 - 100 100 - 120 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,052.3 70 - 80 80 - 90 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,052.4 60 - 70 70 - 80 0,01 0,02 0,03 0,03 0,02 0,04 0,03 0,042.5 70 - 90 90 - 100 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,052.6 80 - 100 100 - 120 0,02 0,03 0,03 0,04 0,03 0,05 0,04 0,052.73.13.23.33.43.53.63.73.84.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
Cutting data for solid carbide roughing cutter 52 340 ... / 52 341 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 285
13
Ti 1000
Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm Ø d1 = 25 mm
Emul
sion
Com
pres
sed
air
MM
S
fz (mm) fz (mm) fz (mm) fz (mm) fz (mm)
Index
1.1 0,08 0,09 0,09 0,1 0,1 0,11 0,11 0,12 0,12 0,13 � �1.2 0,08 0,09 0,09 0,1 0,1 0,11 0,11 0,12 0,12 0,13 � �1.3 0,08 0,09 0,09 0,1 0,1 0,11 0,11 0,12 0,12 0,13 � �1.4 0,07 0,08 0,08 0,09 0,09 0,1 0,1 0,11 0,11 0,12 � �1.5 0,07 0,08 0,08 0,09 0,09 0,1 0,01 0,11 0,11 0,12 � �1.6 0,04 0,07 0,05 0,07 0,06 0,09 0,07 0,09 0,08 0,1 � �1.7 0,04 0,07 0,05 0,07 0,06 0,09 0,07 0,09 0,08 0,1 � �1.81.9 0,08 0,09 0,09 0,1 0,1 0,11 0,11 0,12 0,12 0,13 � �
1.101.111.12 0,04 0,07 0,05 0,07 0,06 0,09 0,07 0,09 0,08 0,1 � �1.131.141.151.162.1 0,05 0,06 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 �2.2 0,05 0,06 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 �2.3 0,05 0,06 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 �2.4 0,03 0,05 0,04 0,06 0,04 0,07 0,05 0,08 0,06 0,1 �2.5 0,05 0,06 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 �2.6 0,05 0,06 0,06 0,07 0,06 0,08 0,07 0,09 0,08 0,1 �2.73.13.23.33.43.53.63.73.84.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
For Full slot milling the values indicated in the table are based on:
ae = 1 x d1
ap = 1 x d1
For Contour milling the values indicated in the table are based on:
ae = 0,4 x d1
ap = 1 x d1
Coolant● = 1st choice○ = suitable
Solid Carbide milling cutters
13 / 286 toolingcenter.com
HSC MachiningConventional machi-
ning
Ø d1 = 3 mm Ø d1 = 4 mm
fz (mm) fz (mm)
Indexap ae vc ap ae vc
(x d1) (x d1) (m/min.) (x d1) (x d1) (m/min.)
1.1 0,015 0,02 240 - 260 0,02 0,02 140 - 160 0,021 0,012 0,028 0,0161.2 0,015 0,02 240 - 260 0,02 0,02 140 - 160 0,021 0,012 0,028 0,0161.3 0,015 0,02 240 - 260 0,02 0,02 140 - 160 0,021 0,012 0,028 0,0161.4 0,015 0,02 240 - 260 0,02 0,02 140 - 160 0,021 0,012 0,028 0,0161.5 0,015 0,02 240 - 260 0,02 0,02 140 - 160 0,021 0,012 0,028 0,0161.6 0,015 0,02 220 - 240 0,02 0,02 120 - 140 0,021 0,012 0,028 0,0161.7 0,015 0,02 220 - 240 0,02 0,02 120 - 140 0,021 0,012 0,028 0,0161.8 0,015 0,02 160 - 180 0,02 0,02 100 - 120 0,021 0,011 0,028 0,0141.9 0,015 0,02 220 - 240 0,02 0,02 120 - 140 0,021 0,012 0,028 0,016
1.10 0,015 0,02 220 - 240 0,02 0,02 120 - 140 0,021 0,012 0,028 0,0161.11 0,015 0,02 160 - 180 0,02 0,02 100 - 120 0,021 0,011 0,028 0,0141.12 0,015 0,02 160 - 180 0,02 0,02 100 - 120 0,021 0,011 0,028 0,0141.131.141.15 0,015 0,02 160 - 180 0,02 0,02 100 - 120 0,021 0,011 0,028 0,0141.16 0,015 0,02 160 - 180 0,02 0,02 100 - 120 0,021 0,011 0,028 0,0142.12.22.32.42.52.62.73.1 0,02 0,02 180 - 200 0,02 0,02 120 - 140 0,024 0,012 0,032 0,0163.2 0,02 0,02 180 - 200 0,02 0,02 120 - 140 0,024 0,012 0,032 0,0163.3 0,02 0,02 180 - 200 0,02 0,02 120 - 140 0,024 0,012 0,032 0,0163.4 0,02 0,02 180 - 200 0,02 0,02 120 - 140 0,024 0,012 0,032 0,0163.5 0,02 0,02 160 - 180 0,02 0,02 100 - 120 0,018 0,009 0,024 0,0123.6 0,02 0,02 160 - 180 0,02 0,02 100 - 120 0,018 0,009 0,024 0,0123.7 0,02 0,02 160 - 180 0,02 0,02 100 - 120 0,018 0,009 0,024 0,0123.8 0,02 0,02 160 - 180 0,02 0,02 100 - 120 0,018 0,009 0,024 0,0124.14.24.34.44.54.64.7 0,02 0,02 180- 200 0,02 0,02 140 - 160 0,015 0,012 0,02 0,0164.8 0,02 0,02 160 - 180 0,02 0,02 120 - 140 0,012 0,009 0,016 0,0124.94.104.11 0,02 0,02 180 - 200 0,02 0,02 140 - 160 0,015 0,012 0,02 0,0164.12 0,02 0,02 180 - 200 0,02 0,02 140 - 160 0,015 0,012 0,02 0,0164.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.1 0,015 0,02 160 - 180 0,02 0,02 100 - 120 0,021 0,011 0,028 0,0146.2 0,01 0,02 140 - 160 0,02 0,02 80 - 100 0,021 0,011 0,028 0,0146.3 0,01 0,02 120 - 140 0,02 0,02 60 - 80 0,018 0,009 0,024 0,0126.4 0,005 0,015 100 - 120 0,015 0,015 50 - 60 0,018 0,006 0,024 0,0086.5 0,005 0,01 80 - 100 0,01 0,01 40 - 50 0,015 0,006 0,02 0,008
Cutting data for solid carbide torus and ball nosed end mills for HSC machining 52 732 ... / 52 733 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 287
13
Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 16 mm
Emul
sion
Com
pres
sed
air
MM
S
fz (mm) fz (mm) fz (mm) fz (mm) fz (mm) fz (mm)
Index
1.1 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.2 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.3 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.4 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.5 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.6 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.7 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.8 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 � � �1.9 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.10 0,035 0,02 0,042 0,024 0,06 0,03 0,07 0,04 0,08 0,05 0,11 0,06 � � �1.11 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 � � �1.12 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 � � �1.131.141.15 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 �1.16 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 �2.12.22.32.42.52.62.73.1 0,04 0,02 0,048 0,024 0,06 0,03 0,08 0,04 0,10 0,05 0,13 0,06 �3.2 0,04 0,02 0,048 0,024 0,06 0,03 0,08 0,04 0,10 0,05 0,13 0,06 �3.3 0,04 0,02 0,048 0,024 0,06 0,03 0,08 0,04 0,10 0,05 0,13 0,06 �3.4 0,04 0,02 0,048 0,024 0,06 0,03 0,08 0,04 0,10 0,05 0,13 0,06 �3.5 0,03 0,015 0,036 0,018 0,05 0,02 0,06 0,03 0,07 0,04 0,10 0,05 �3.6 0,03 0,015 0,036 0,018 0,05 0,02 0,06 0,03 0,07 0,04 0,10 0,05 �3.7 0,03 0,015 0,036 0,018 0,05 0,02 0,06 0,03 0,07 0,04 0,10 0,05 �3.8 0,03 0,015 0,036 0,018 0,05 0,02 0,06 0,03 0,07 0,04 0,10 0,05 �4.14.24.34.44.54.64.7 0,025 0,02 0,03 0,024 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,06 � �4.8 0,02 0,015 0,024 0,018 0,03 0,02 0,04 0,03 0,05 0,04 0,06 0,05 �4.94.104.11 0,025 0,02 0,03 0,024 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,06 � �4.12 0,025 0,02 0,03 0,024 0,04 0,03 0,05 0,04 0,06 0,05 0,08 0,06 � �4.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.1 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 �6.2 0,035 0,017 0,042 0,021 0,06 0,03 0,07 0,04 0,08 0,04 0,11 0,06 �6.3 0,03 0,015 0,036 0,018 0,05 0,02 0,06 0,03 0,07 0,04 0,10 0,05 �6.4 0,03 0,01 0,036 0,012 0,05 0,02 0,06 0,02 0,07 0,02 0,10 0,03 �6.5 0,025 0,01 0,03 0,012 0,04 0,02 0,05 0,02 0,06 0,02 0,08 0,03 �
Coolant● = 1st choice○ = suitable
Solid Carbide milling cutters
13 / 288 toolingcenter.com
TiAlN
Medium machining
Rough machi-ning
Medium Roughing Medium Roughing Medium Roughing
Ø d1 = 6 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 10 mm
Indexvc vc ap fz ap fz ap fz ap fz ap fz ap fz
(m/min.) (m/min.) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
1.1 250-300 150-250 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
1.2 250-300 150-250 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
1.3 250-300 150-250 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
1.4 200-250 180-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1 0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.5 220-250 200-220 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.6 220-250 200-220 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.7 170-190 170-190 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.8 160-180 160-180 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.9 220-250 200-220 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.10 170-190 170-190 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.11 160-180 160-180 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.12 170-190 170-190 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1 0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.13 100-120 100-120 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.14 80-100 80-100 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.15 140-180 140-180 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
1.16 140-180 140-180 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1 0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.1 110-150 70-110 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.2 110-150 70-110 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.3 110-150 70-110 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.4 110-150 70-110 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.5 110-150 70-110 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.6 80-110 60-90 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
2.7 80-110 60-90 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
3.1 300-350 250-300 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
3.2 180-250 180-250 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
3.3 200-250 150-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
3.4 200-250 150-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
3.5 200-250 150-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
3.6 200-250 150-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
3.7 200-250 150-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
3.8 200-250 150-200 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
4.1 400-600 400-600 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.2 400-600 400-600 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.3 400-600 400-600 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.4 400-600 400-600 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.5 400-600 400-600 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.6 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.7 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.8 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.9 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.10 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.11 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.12 300-500 300-500 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
4.134.144.154.164.174.184.195.15.25.35.4 50-80 30-50 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
5.55.65.7 50-80 30-50 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
5.85.95.10 60-80 60-80 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
5.11 40-80 40-80 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
6.1 160-190 160-190 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,3 0,2-0,3 0,3-0,5 0,1-0,2 0,1-0,4 0,2-0,3 0,4-0,7
6.2 150-180 80-120 0,1-0,2 0,1-0,22 0,2-0,3 0,22-0,35 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,4
6.3 120-150 80-100 0,1-0,2 0,1-0,22 0,2-0,3 0,2-0,3 0,1-0,2 0,1-0,25 0,2-0,3 0,2-0,3 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,35
6.4 80-110 60-90 0,1-0,2 0,1-0,22 0,2-0,3 0,2-0,3 0,1-0,2 0,1-0,25 0,2-0,3 0,2-0,3 0,1-0,2 0,1-0,25 0,2-0,3 0,25-0,35
6.5
Cutting data for solid carbide High Feed cutter 56 900 ... / 56 902 ... / 56 904 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 289
13
TiAlN
Medium Roughing Medium Roughing
Emul
sion
Com
pres
sed
air
MM
S
Ø d1 = 12 mm Ø d1 = 12 mm Ø d1 = 16 mm Ø d1= 16 mm
Indexap fz ap fz ap fz ap fz
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
1.1 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �1.2 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �1.3 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �1.4 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.5 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.7 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.8 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.9 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �
1.10 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.11 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.12 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.13 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.14 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.15 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �1.16 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.1 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.2 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.3 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.4 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.5 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �2.7 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �3.1 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �3.2 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �3.3 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 � �3.4 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 � �3.5 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 � �3.6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 � �3.7 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 � �3.8 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 � �4.1 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.2 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.3 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.4 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.5 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.6 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.7 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.8 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.9 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �
4.10 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.11 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.12 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �4.134.144.154.164.174.184.195.15.25.35.4 0,1-0,2 0,1-0,45 0,2 - 0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �5.55.65.7 0,1-0,2 0,1-0,45 0,2 - 0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �5.85.95.10 0,1-0,2 0,1-0,45 0,2 - 0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �5.11 0,1-0,2 0,1-0,45 0,2 - 0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �6.1 0,1-0,2 0,1-0,45 0,2-0,3 0,45-0,8 0,1-0,25 0,1-0,45 0,25-0,4 0,45-0,8 � �6.2 0,1-0,2 0,1-0,35 0,2-0,3 0,35-0,6 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,6 � �6.3 0,1-0,2 0,1-0,35 0,2-0,3 0,3-0,4 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,45 � �6.4 0,1-0,2 0,1-0,35 0,2-0,3 0,3-0,4 0,1-0,25 0,1-0,35 0,25-0,4 0,35-0,45 � �6.5
The width of cut (ae) in steel should be 60 - 95% of the
cutter diameter (Ø d1), with high-grade steels and for sticking materials 40% of Ø d1 maximum!
Coolant● = 1st choice○ = suitable
Solid Carbide milling cutters
13 / 290 toolingcenter.com
Type
sho
rt
Type
long
/ ex
tra lo
ng
Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 230 184 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.2 240 192 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.3 210 168 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.4 200 160 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.5 200 160 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.6 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.7 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.8 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.9 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.10 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.11 170 136 1,0* 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
1.12 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.131.141.151.162.1 130 104 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.2 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.3 100 80 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.4 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.5 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.6 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.7 30 24 1,0* 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
3.1 200 160 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
3.2 180 144 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
3.3 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.4 170 136 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.5 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.6 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.7 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.8 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
4.14.24.34.44.54.6 280 224 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.7 300 240 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.8 160 128 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.9 140 112 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.10 120 96 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.11 350 280 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.12 300 240 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.134.144.154.164.174.184.195.15.25.3 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.4 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.5 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.6 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.7 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.8 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.9 160 128 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
5.10 140 112 0,5 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
5.11 100 80 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
6.16.26.36.46.5
*= Type long ap max: 1.5 x d1 with fz x 0.75 Radius cutter ap max: 0.5 x d1
With type „extra long“ only a full slot of 0.5 ap x d1 is possible. When profile milling with a 0.1 to 0.4 x d1 ae, an ap of 1.0 x d1 be used.
Cutting data for Article-No. 50 951 ... / 50 952 ... / 50 953 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 291
13
Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.2 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.3 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.4 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.5 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.6 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.7 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.8 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.9 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.10 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.11 0,10 0,08 0,05 0,10 0,08 0,06 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.12 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.131.141.151.162.1 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.2 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.3 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.4 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.5 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.6 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.7 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �3.1 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 � � �3.2 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,16 0,13 0,10 � � �3.3 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.4 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.5 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.6 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.7 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.8 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �4.14.24.34.44.54.6 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.7 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.8 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.9 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.10 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.11 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.12 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 �4.134.144.154.164.174.184.195.15.25.3 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �5.4 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �5.5 0,06 0,03 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �5.6 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �5.7 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �5.8 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �5.9 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,08 0,07 0,05 �5.10 0,10 0,08 0,05 0,10 0,08 0,06 0,10 0,08 0,06 0,11 0,09 0,07 0,08 0,07 0,05 �5.11 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,08 0,07 0,05 �6.16.26.36.46.5
Plunging angle for ramping and helical milling: 3 °
Solid Carbide milling cutters
13 / 292 toolingcenter.com
Type
sho
rt
Type
long
Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 240 192 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.2 250 200 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.3 210 168 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.4 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.5 200 160 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.6 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.7 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.8 170 136 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.9 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.10 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.11 170 136 1,0* 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
1.12 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.131.141.15 170 136 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.16 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
2.12.22.32.42.52.62.73.1 200 160 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
3.2 180 144 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
3.3 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.4 170 136 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.5 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.6 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.7 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.8 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
*= Type long: ap max= 1.5 x d1 with fz x 0.75 Plunging angle for ramping and helical milling: 3 °
Cutting data for article-No. 50 954 ...
Solid Carbide milling cutters
13
toolingcenter.com 13 / 293
Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.2 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.3 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.4 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.5 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.6 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.7 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.8 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.9 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.10 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.11 0,10 0,08 0,05 0,10 0,08 0,06 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.12 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.131.141.15 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.16 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �2.12.22.32.42.52.62.73.1 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 � � �3.2 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 � � �3.3 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.4 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.5 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.6 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.7 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.8 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.26.36.46.5
Solid Carbide milling cutters
13 / 294 toolingcenter.com
Type
sho
rt
Type
long
/ ex
tra lo
ng
Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
1.1 240 192 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
1.2 250 200 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
1.3 210 168 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.4 190 152 1,0* 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
1.5 200 160 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.6 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.7 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.8 170 136 1,0* 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
1.9 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.10 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.11 170 136 1,0* 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
1.12 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.131.141.15 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
1.16 150 120 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
2.1 130 104 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.2 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.3 100 80 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.4 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.5 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.6 120 96 1,0* 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
2.7 30 24 1,0* 0,016 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,00 0,03 0,02 0,01 0,04 0,03
3.1 200 160 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
3.2 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.3 190 152 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.4 150 120 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.5 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.6 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.7 180 144 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
3.8 160 128 1,0* 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
4.14.24.34.44.54.6 280 224 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.7 300 240 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.8 160 128 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.9 140 112 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.10 120 96 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.11 350 280 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.12 300 240 1,0* 0,045 0,035 0,025 0,064 0,048 0,032 0,076 0,057 0,038 0,09 0,07 0,05 0,12 0,09 0,06
4.134.144.154.164.174.184.195.15.25.3 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.4 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.5 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.6 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.7 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.8 30 24 0,5 0,018 0,014 0,010 0,026 0,019 0,013 0,034 0,025 0,017 0,04 0,03 0,02 0,05 0,04 0,03
5.9 160 128 0,5 0,036 0,028 0,020 0,054 0,040 0,027 0,066 0,049 0,033 0,08 0,06 0,04 0,10 0,08 0,05
5.10 140 112 0,5 0,027 0,021 0,015 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,08 0,06 0,04
5.11 100 80 0,5 0,022 0,017 0,012 0,032 0,024 0,016 0,042 0,031 0,021 0,05 0,04 0,03 0,06 0,05 0,03
6.16.26.36.46.5
*= Type long: ap max= 1.5 x d1 with fz x 0.75 With type „extra long“ only a full slot of 0.5 ap x d1 is possible. When profile milling with a 0.1 to 0.4 x d1 ae, an ap of 1.0 x d1 be used.
Cutting data for article no. 50 955 ... / 50 964 ... / 50 965 ... / 50 968 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 295
13
Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 � � �1.2 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 � � �1.3 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.4 0,10 0,08 0,05 0,10 0,08 0,06 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.5 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.6 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.7 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.8 0,10 0,08 0,05 0,10 0,08 0,06 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.9 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.10 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.11 0,10 0,08 0,05 0,10 0,08 0,06 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 � � �1.12 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.131.141.15 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �1.16 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �2.1 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.2 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.3 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.4 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.5 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.6 0,08 0,06 0,04 0,08 0,06 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 �2.7 0,06 0,05 0,03 0,06 0,05 0,04 0,07 0,05 0,04 0,07 0,06 0,05 0,08 0,07 0,05 �3.1 0,14 0,10 0,07 0,16 0,12 0,09 0,17 0,13 0,10 0,17 0,14 0,11 0,19 0,16 0,12 � � �3.2 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.3 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.4 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.5 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.6 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.7 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �3.8 0,12 0,09 0,06 0,13 0,10 0,07 0,14 0,10 0,08 0,14 0,12 0,09 0,16 0,13 0,10 � � �4.14.24.34.44.54.6 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,19 0,16 0,12 0,22 0,18 0,14 �4.7 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,19 0,16 0,12 0,22 0,18 0,14 �4.8 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,19 0,16 0,12 0,22 0,18 0,14 �4.9 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,19 0,16 0,12 0,22 0,18 0,14 �4.10 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,19 0,16 0,12 0,22 0,18 0,14 �4.11 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,18 0,14 0,11 0,19 0,15 0,12 �4.12 0,17 0,13 0,09 0,18 0,14 0,10 0,19 0,14 0,11 0,18 0,14 0,11 0,19 0,15 0,12 �4.134.144.154.164.174.184.195.15.25.3 0,07 0,05 0,04 0,07 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,09 0,07 0,05 �5.4 0,07 0,05 0,04 0,07 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,09 0,07 0,05 �5.5 0,07 0,03 0,04 0,07 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,09 0,07 0,05 �5.6 0,07 0,05 0,04 0,07 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,09 0,07 0,05 �5.7 0,07 0,05 0,04 0,07 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,09 0,07 0,05 �5.8 0,07 0,05 0,04 0,07 0,06 0,04 0,08 0,06 0,05 0,08 0,07 0,05 0,09 0,07 0,05 �5.9 0,14 0,10 0,07 0,15 0,11 0,08 0,15 0,12 0,09 0,16 0,13 0,10 0,17 0,14 0,11 �5.10 0,11 0,08 0,06 0,11 0,09 0,06 0,12 0,09 0,07 0,13 0,10 0,08 0,14 0,12 0,09 �5.11 0,09 0,07 0,05 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,12 0,10 0,08 �6.16.26.36.46.5
Plunging angle for ramping and helical milling: 3 °
Solid Carbide milling cutters
13 / 296 toolingcenter.com
Type
sho
rt
Type
long
Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)fz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.2 230 184 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.3 240 192 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.4 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.5 210 168 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.6 190 152 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
1.7 200 160 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.8 180 144 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,73 0,57 0,40 0,59 0,45 0,35
1.91.10 180 144 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.11 170 136 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
1.12 180 144 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
1.13 150 120 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.141.15 150 120 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
1.16 150 120 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
2.12.22.32.42.52.62.73.1 250 200 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.2 230 184 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.3 200 160 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.4 180 144 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.5 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.6 210 168 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.7 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.8 210 168 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
4.14.24.34.44.54.6 250 200 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
4.74.8 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
4.94.10 180 144 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
4.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.16.2 120 96 0,10 0,07 0,05 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,46 0,35 0,25 0,51 0,39 0,30
6.36.46.5
ae max = 0.5 x d1 / ap max = 0.05 x d1 Plunging angle for ramping and helical milling: 3 °
Cutting data for article no. 50 961 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 297
13
Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mm
1.1 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.2 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.3 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.4 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.5 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.6 0,63 0,52 0,40 0,71 0,58 0,45 � � �1.7 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.8 0,63 0,52 0,40 0,71 0,58 0,45 � � �1.9
1.10 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.11 0,63 0,52 0,40 0,71 0,58 0,45 � � �1.12 0,63 0,52 0,40 0,71 0,58 0,45 � � �1.13 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.141.15 0,63 0,52 0,40 0,71 0,58 0,45 � � �1.16 0,63 0,52 0,40 0,71 0,58 0,45 � � �2.12.22.32.42.52.62.73.1 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.2 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.3 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.4 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.5 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.6 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.7 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.8 0,79 0,65 0,50 0,87 0,71 0,55 � � �4.14.24.34.44.54.6 0,79 0,65 0,50 0,87 0,71 0,55 �4.74.8 0,87 0,71 0,55 0,87 0,71 0,55 �4.9
4.10 0,79 0,65 0,50 0,87 0,71 0,55 �4.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.9
5.105.116.16.2 0,55 0,45 0,35 0,63 0,52 0,40 � �6.36.46.5
Solid Carbide milling cutters
13 / 298 toolingcenter.com
Type
sho
rt
Type
long
Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)fz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
1.11.21.31.41.51.61.71.8 170 136 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.91.101.11 170 136 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.12 190 152 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.13 130 104 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.141.15 120 96 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
1.16 120 96 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
2.12.22.32.42.52.62.73.1 250 200 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.2 230 184 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.3 200 160 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.4 180 144 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.5 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.6 210 168 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.7 220 176 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
3.8 210 168 0,40 0,30 0,20 0,50 0,37 0,25 0,60 0,45 0,30 0,70 0,52 0,35 0,73 0,57 0,40 0,76 0,58 0,45
4.14.24.34.44.54.64.74.84.94.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.95.105.116.1 160 128 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
6.2 120 96 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
6.3 80 64 0,20 0,15 0,10 0,30 0,22 0,15 0,40 0,30 0,20 0,50 0,37 0,25 0,55 0,42 0,30 0,59 0,45 0,35
6.46.5
ae max = 0.5 x d1 / ap max = 0.03 x d1 Plunging angle for ramping and helical milling: 3 °
Cutting data for article no. 50 962 ...
Solid Carbide milling cutters
13
toolingcenter.com 13 / 299
Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Emul
sion
Com
pres
sed
air
MM
S
Indexfz
mmfz
mm
1.11.21.31.41.51.61.71.8 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.9
1.101.11 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.12 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.13 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.141.15 0,79 0,65 0,50 0,87 0,71 0,55 � � �1.16 0,79 0,65 0,50 0,87 0,71 0,55 � � �2.12.22.32.42.52.62.73.1 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.2 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.3 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.4 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.5 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.6 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.7 0,79 0,65 0,50 0,87 0,71 0,55 � � �3.8 0,79 0,65 0,50 0,87 0,71 0,55 � � �4.14.24.34.44.54.64.74.84.9
4.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.9
5.105.116.1 0,63 0,52 0,40 0,71 0,58 0,45 � �6.2 0,63 0,52 0,40 0,71 0,58 0,45 � �6.3 0,63 0,52 0,40 0,71 0,58 0,45 � �6.46.5
Solid Carbide milling cutters
13 / 300 toolingcenter.com
Emul
sion
/ M
MS
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
4.1 700 1,0** 0,054 0,042 0,030 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,20 0,15 0,10 0,24 0,18 0,12
4.2 700 1,0** 0,054 0,042 0,030 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,20 0,15 0,10 0,24 0,18 0,12
4.3 420 1,0** 0,054 0,042 0,030 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,20 0,15 0,10 0,24 0,18 0,12
4.4 420 1,0** 0,054 0,042 0,030 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,20 0,15 0,10 0,24 0,18 0,12
4.5 280 1,0** 0,054 0,042 0,030 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,20 0,15 0,10 0,24 0,18 0,12
4.6 200 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
4.7 180 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
4.8 175 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
4.9 175 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
4.10 175 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
4.11 280 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
4.12 210 1,0** 0,036 0,028 0,020 0,054 0,042 0,030 0,080 0,060 0,040 0,100 0,075 0,050 0,16 0,12 0,08 0,20 0,15 0,10
** = ap 1.5 x d1 only use with ae range of 0.1-0.4 x d1 applicable
Cutting data for W-HPC cutter, short
Cutting data for W-HPC cutter, long
Emul
sion
/ M
MS
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
4.1 400 1,0** 0,036 0,028 0,020 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,16 0,12 0,08 0,20 0,15 0,10
4.2 400 1,0** 0,036 0,028 0,020 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,16 0,12 0,08 0,20 0,15 0,10
4.3 240 1,0** 0,036 0,028 0,020 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,16 0,12 0,08 0,20 0,15 0,10
4.4 240 1,0** 0,036 0,028 0,020 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,16 0,12 0,08 0,20 0,15 0,10
4.5 160 1,0** 0,036 0,028 0,020 0,063 0,049 0,035 0,100 0,075 0,050 0,120 0,089 0,060 0,16 0,12 0,08 0,20 0,15 0,10
4.6 115 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
4.7 120 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
4.8 100 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
4.9 100 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
4.10 100 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
4.11 160 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
4.12 120 1,0** 0,027 0,021 0,015 0,045 0,035 0,025 0,070 0,052 0,035 0,100 0,075 0,050 0,14 0,10 0,07 0,18 0,13 0,09
** = ap 1.5 x d1 only use with ae range of 0.1-0.4 x d1 applicable
Cutting data for W-HPC cutter, extra long
Emul
sion
/ M
MS
Ø d1 = 3 mm Ø d1 = 4 mm Ø d1 = 5 mm Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
IndexVc
(m/min.)apmax x d1
fzmm
fzmm
fzmm
fzmm
fzmm
fzmm
4.1 300 0,75** 0,013 0,010 0,007 0,018 0,014 0,010 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,07 0,05 0,04
4.2 300 0,75** 0,013 0,010 0,007 0,018 0,014 0,010 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,07 0,05 0,04
4.3 180 0,75** 0,013 0,010 0,007 0,018 0,014 0,010 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,07 0,05 0,04
4.4 180 0,75** 0,013 0,010 0,007 0,018 0,014 0,010 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,07 0,05 0,04
4.5 125 0,75** 0,013 0,010 0,007 0,018 0,014 0,010 0,040 0,030 0,020 0,050 0,037 0,025 0,06 0,05 0,03 0,07 0,05 0,04
4.6 90 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
4.7 90 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
4.8 75 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
4.9 75 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
4.10 75 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
4.11 125 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
4.12 90 0,75** 0,009 0,007 0,005 0,014 0,011 0,008 0,020 0,015 0,010 0,030 0,022 0,015 0,04 0,03 0,02 0,05 0,04 0,03
** = ap 1.25 x d1 only in the range 0.1-0.4 x d1 applicable
Cooling lubrication with emulsion
Solid Carbide milling cutters
toolingcenter.com 13 / 301
13
Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm Ø d1 = 25 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
4.1 0,27 0,22 0,15 0,29 0,23 0,16 0,31 0,24 0,17 0,33 0,25 0,18 0,34 0,27 0,27 0,35 0,28 0,22
4.2 0,27 0,22 0,15 0,29 0,23 0,16 0,31 0,24 0,17 0,33 0,25 0,18 0,34 0,27 0,27 0,35 0,28 0,22
4.3 0,27 0,22 0,15 0,29 0,23 0,16 0,31 0,24 0,17 0,33 0,25 0,18 0,34 0,27 0,27 0,35 0,28 0,22
4.4 0,27 0,22 0,15 0,29 0,23 0,16 0,31 0,24 0,17 0,33 0,25 0,18 0,34 0,27 0,27 0,35 0,28 0,22
4.5 0,27 0,22 0,15 0,29 0,23 0,16 0,31 0,24 0,17 0,33 0,25 0,18 0,34 0,27 0,27 0,35 0,28 0,22
4.6 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
4.7 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
4.8 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
4.9 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
4.10 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
4.11 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
4.12 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,24 0,32 0,26 0,20
Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm Ø d1 = 25 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
4.1 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,17 0,32 0,26 0,20
4.2 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,17 0,32 0,26 0,20
4.3 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,17 0,32 0,26 0,20
4.4 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,17 0,32 0,26 0,20
4.5 0,22 0,17 0,12 0,24 0,18 0,13 0,25 0,20 0,14 0,27 0,21 0,15 0,30 0,24 0,17 0,32 0,26 0,20
4.6 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
4.7 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
4.8 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
4.9 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
4.10 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
4.11 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
4.12 0,20 0,16 0,11 0,22 0,17 0,12 0,23 0,18 0,13 0,26 0,20 0,14 0,26 0,21 0,15 0,29 0,23 0,18
Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm Ø d1 = 25 mm
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,6-1,0
x d1
Indexfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
4.1 0,08 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,16 0,13 0,10
4.2 0,08 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,16 0,13 0,10
4.3 0,08 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,16 0,13 0,10
4.4 0,08 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,16 0,13 0,10
4.5 0,08 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,13 0,10 0,08 0,16 0,13 0,10
4.6 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
4.7 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
4.8 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
4.9 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
4.10 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
4.11 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
4.12 0,06 0,05 0,03 0,07 0,06 0,04 0,09 0,07 0,05 0,10 0,08 0,06 0,11 0,09 0,07 0,14 0,12 0,09
Cutting data for W-HPC cutter, short
Cutting data for W-HPC cutter, long
Cutting data for W-HPC cutter, extra long
Solid Carbide milling cutters
13 / 302 toolingcenter.com
Type
long
Type
long
/ ex
tra lo
ng
Ø d1 = 6 mm Ø d1 = 8 mm Ø d1 = 10 mm Ø d1 = 12 mm Ø d1 = 14 mm Ø d1 = 16 mm Ø d1 = 18 mm Ø d1 = 20 mm 1st choice suitable
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
ae 0,1-0,2
x d1
ae 0,3-0,4
x d1
Emul
sion
Com
pres
sed
air
MM
S
IndexVc
(m/min.)fz
mmfz
mmfz
mmfz
mmfz
mmfz
mmfz
mmfz
mm
1.1 290 232 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.2 300 240 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.3 260 208 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.4 250 200 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.5 250 200 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.6 230 184 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.7 230 184 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.8 220 176 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.9 200 160 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �
1.10 230 184 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.11 210 168 0,050 0,037 0,06 0,05 0,08 0,06 0,10 0,08 0,10 0,08 0,10 0,08 0,11 0,09 0,13 0,10 � � �1.12 220 176 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.13 150 120 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 � � �1.141.15 210 168 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �1.16 200 160 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �2.1 160 128 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �2.2 150 120 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �2.3 125 100 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �2.4 150 120 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �2.5 150 120 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �2.6 150 120 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �2.7 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,05 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �3.1 250 200 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 � � �3.2 220 176 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 � � �3.3 230 184 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �3.4 210 168 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �3.5 220 176 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �3.6 200 160 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �3.7 220 176 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �3.8 200 160 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 � � �4.14.24.34.44.54.6 350 280 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �4.7 370 296 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �4.8 300 240 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �4.9 220 176 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �
4.10 180 144 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �4.11 430 344 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �4.12 370 296 0,076 0,057 0,09 0,07 0,12 0,09 0,14 0,10 0,16 0,12 0,17 0,13 0,17 0,14 0,19 0,16 �4.134.144.154.164.174.184.195.15.25.3 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,05 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �5.4 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,05 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �5.5 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,03 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �5.6 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,05 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �5.7 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,05 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �5.8 40 32 0,034 0,025 0,04 0,03 0,05 0,04 0,06 0,05 0,06 0,05 0,07 0,05 0,07 0,06 0,08 0,07 �5.9 200 160 0,066 0,049 0,08 0,06 0,10 0,08 0,12 0,09 0,13 0,10 0,14 0,10 0,14 0,12 0,16 0,13 �
5.10 175 140 0,050 0,037 0,06 0,05 0,08 0,06 0,10 0,08 0,10 0,08 0,10 0,08 0,11 0,09 0,13 0,10 �5.11 125 100 0,042 0,031 0,05 0,04 0,06 0,05 0,08 0,06 0,08 0,06 0,09 0,07 0,10 0,08 0,11 0,09 �6.16.26.36.46.5
ae max = 0.05 x d1 / ap max = 2 x d1
Cutting data for article no. 50 959 ...
Solid Carbide milling cutters
toolingcenter.com 13 / 303
13
Slot milling procedure
Advantages:
best surface quality
Disadvantages:
Machine vibration during the milling process
On unstable, low power machines slots to 2 x D depth with tools with a diameter of 20 mm, can be machined using trochoidal milling.
Semi-circular slot milling
radial feed
Pendulum slot milling
radial feed
small steps
Trochoidal slot milling
radial feed
small steps
Large cutting depths even on unstable, low power machines
Here the radial feed amounts to 5 - 30% of the cutting diameter depending upon toughness of the material. As it actually applies to Trochoidoidal milling, the cutting forces are lower.
The obtainable surface quality depends on the method.
Advantages:
consistant, soft running of the machine
Disadvantages:
worse surface, longer running time
Advantages:
fastest procedure
Disadvantages:
reduced service life when conventional milling
Solid Carbide milling cutters
13 / 304 toolingcenter.com
Advantages with the use of the cool air nozzle
In order to improve the service life when dry machining, we recommend the use of our cooling nozzle, which is applicable with a normal compressed air connection from a pressure of 6 bar.
The main advantages are that cooling agent disposal is not required and tool life increases up to 100% when dry machining
Not only forcooling the tool and workpiece it is primarilyfor chip removal to preventchip jamming.
Technical description - operating instruction
The principle of the cold-air nozzle is based on the use of vortex tubes. Ordinary air is divided into cold and hot air streams.
Without additional power supply or moving parts the cool air nozzle can producecooling performance of up to 733 W or Temperatures of approx. -40 °C are produced and requires only operating pressure air of approx. 6 bar.
A water trap or service unit should be mounted. A regulating valve in the hot-air outlet regulates the temperatures and currents
Cool-jet
Cooling agent hose
Quick-coupler with ball valve
Vortex tube
Regulating valve for cool air (on the inside)
Compressed air pressure (approx. 6 bar)
available cool air Hot-air removal (to 100° C)
Adjustment valve
Entra
nce
pres
sure 3 bar -31° C up to -6° C
4 bar -35° C up to -8° C5 bar -39° C up to -10° C6 bar -42° C up to -11° C7 bar -46° C up to -13° C
Utilizable air temperature measured at the effective discharge of the vortex tube (not the nozzle end)
Air consumption at an inlet temperature of + 21 ° C and an inlet pressure of 6.9 bar: 7,08 l / sec. (25.5 m³ / h)
In order to operate the regulating valve, the silencer must be unscrewed - there is a burn danger! The valve of the hot air side can reach up to 100 °C: Before contact, allow cooling!
PG Y7Article no.
Cool-jet 81 900 ...£
3-7 bar air pressure, at -50°C 1,003.37 81900100
PG Y7Article no.
Accessories 81 900 ...£
Magnetic plate Ø80 mm without clamping arm 53.72 81900101Clamping arm, length 75 mm 158.51 81900102Complete set (with magnetic set and clamping arm), weight 0,4 kg 209.18 81900103Spare tube, length 300 mm 53.72 81900104Jet silencer (air filter) 11.28 81900105
Solid Carbide milling cutters
toolingcenter.com 13 / 305
13
Designation Abbreviation Unit Formula Formula
Number of revolutions n min-1 n =v
C x 1000
d1 x π
vC = 25 m/min
d1 = 20 mm
25 x 1000
20 x π= 398 min-1n =
Cutting speed vc m/min vc =
d1 x π x n
1000
n = 400 min-1
d1 = 20 mm 1000
20 x π x 400= 25 m/minvc =
Feed per tooth fz mm fz =
vf
Z x nn = 400 min-1
vf = 320 mm/min
Z = 44 x 400
320= 0,2 mmfz =
Feed per revolution f mm f = fz x Z
fz = 0,2 mm
Z = 40,2 x 4 = 0,8 mmf =
Feed rate vf mm/min vf = f
z x Z x n
fz = 0,2 mmZ = 4n = 400 min-1
0,2 x 4 x 400 = 320 mm/minvf =
Average chip thickness hm mm hm = f
z x
d1
ae√
fz = 0,2 mm
d1 = 20 mmae = 0,3 mm hm = = 0,024 mm0,2 x
0,3
20√Z = Number of teethae= cutting width
Designation Abbreviation Unit Formula Formula
Internal contour vfM mm/min vfM
=v
f x (D - d
1)
D
Ø d
1
D
Outside profile vfM mm/minv
f x (D + d
1)
Dv
fM = Ø
d1
D
Helical ramping vfM mm/minn x fz x Z
x (D - d
1)
Dv
fM = Ø d1
Calculation of the feed rate on the midpoint path of the milling cutter (VfM
)
General formula for calculating the cutting parameters
Solid Carbide milling cutters
13 / 306 toolingcenter.com
Recommendation for tool selection
Factors for cutting speed (Vc) and feed rate (fz) in relation to the overhang length (l5)
l5
Ø d
1
Length
Overhang length (l5) 1,5 x d1 4 x d1 8 x d1 12 x d1 > 12 x d1
Factor for Vc (Kf Vc) 1,2 1,0 0,8 0,7 0,5Factor for fz (Kf fz) 1,0 1,0 0,9 0,85 0,7
Factors for cutting speed (Vc) and feed rate (fz) in relation to the cutting depth (ap) and cutting width (ae)
Factor for Vc (Kf Vc) 1,3 1,1 1,0 0,85Factor for fz (Kf fz) 1,5 1,3 1,0 0,8
Ø d1
ap = 1 x d1
ae = 0,1 x d1
Ø d1
ap = 1 x d1
ae = 0,2 x d1
Ø d1
ae = 0,5 x d1
ap = 1 x d1
Ø d1
ae = 1 x d1
ap = 1 x d1
Correction factor for solid carbide milling cutters
Rake and clearance angles combined with the coating are decisive factors for the operational area.
Characteristics Benefits
Helix angle with slow spiral
- For materials with high tensile strength - High edge stability
- For high material removal rates - Low tendency to edge chipping
- For slot milling, pocket milling, rough milling
Helix angle with quick spiral
- For soft steels, non ferrous metals, etc. - Soft cut
- For low material removal rates - Low cutting forces
- Typical for finishing processes
Small rake angles are applied
- For hard, brittle materials - High edge stability
- For high material removal rates - Low tendency to edge chipping
- for rough machining
Large rake angles are applied
- For soft materials - Soft cut
- For low material removal rates - Low cutting forces
- For finishing - favorable chip flow
- Low tendency to stick
Solid Carbide milling cutters
toolingcenter.com 13 / 307
13
Calculation aid for copy milling
Theoretical surface roughness (Rth) and step over (b
r)
Ø d1 br
Rth
When copy milling, in order to achieve as smooth a surface as possible, the step over br should be adapted to the cutter diameter d1 The smaller the cutter diameter d1 is, the smaller the step over br must be.
RPM correction factor (Kf n) for copy milling
Rth =
d1
2 -d
1² - b
r²
√4
2 -br = R
th x (d
1 - R
th)
√ Ra ≃ 0,1 x R
th
Peripheral and ball nose copy milling Ball nose copy milling
Rough machining
Axial milling depth ap 0,5 x d1 > 0,5 x d1 0,2 x d1 - 0,5 x d1
step over br 1 x d1 0,2 x d1 - 0,5 x d1 0,2 x d1 - 0,5 x d1
Correction factor (Kf n) 1 1 1,1
ap
Ø d1
ap
Ø d1
br
ap
Ø d1
br
Ball nose copy milling
Finish milling
Axial milling depth ap < 0,2 x d1 0,2 x d1 - 0,5 x d1 > 0,5 x d1
step over br < 0,2 x d1 < 0,2 x d1 < 0,2 x d1
Correction factor (Kf n) 2 1,3 1
ap
Ø d1
br
ap
br
Ø d1
br
Ø d1
ap
n =v
C x 1000
d1 x π
x Kf n
Solid Carbide milling cutters
13 / 308 toolingcenter.com
Calculation aid for copy milling
When ball milling the effective milling diameter deff.
must be determined using the following formula:
Information concerning plunge and draw milling
n =v
C x 1000
d1 x π
2 xdeff.
= ap x (d
1 - a
p)
√ deff.
= ap x (2r - a
p)
√(d1 - 2r) + 2 x
d
eff. = (d
1 x sin β ± arc cos ( )
d1 - 2a
p
d1
)
ap
d1
deff
ß
Ball nose milling cutters Torus end milling cutters
ap
ap
ap
Rule: The steeper the angle, the lower the feed rate.The shallower the angle, the larger the feed rate.
Ø d1
ap
ae
For peripheral milling or ball nose copy milling at cutting depths of ap ≥ 0,5 x d1
and ae = 0,2 to 0,5 x d1
the rpm can be calculated through the following fomula:
ap
d1
deff
ap
d1
deff
r
When machining the profile flanks relatively high feed rates are possible as the cutting depth is relatively low (area highlighted in blue).
As soon as the cutting depth decreases during the machining of the profile base, the feed rate canbe increased again.
A large increase in cutting depth occurs when the base of the profile is reached. Here the feed rate must be reduced as othwerwise tool breakage can occur due to vibrations, misalignment or chattering.
When plunge or draw milling dies, the feed rate has to be adapted to the various milling positions.Otherwise the cutting edge can be damaged due to overload (vibrations, misalignment or chattering).
1
1
2
2 3
3
Solid Carbide milling cutters
13
toolingcenter.com 13 / 309
Cutting data for tapered milling cutters
Angled ramping with solid carbide cutters
For external dimensions (shafts)
Tole
ranc
e
Position d e f h js k
Quality 11 8 8 6 8 10 11 12 13 14 16 18 10 11 12
Nom
inal
dim
ensi
on ra
nge
(in m
m)
from 1 -20 -14 -6 0 0 0 0 0 0 +125 +300 - +40 +60 +100
up to 3 -80 -28 -20 -6 -14 -40 -60 -100 -140 -125 -300 - 0 0 0
over 3 -30 -20 -10 0 0 0 0 0 0 +150 +375 - +48 +75 +120
up to 6 -105 -38 -28 -8 -18 -48 -75 -120 -180 -150 -375 - 0 0 0
over 6 -40 -25 -13 0 0 0 0 0 0 +180 +450 - +58 +90 +150
up to 10 -130 -47 -35 -9 -22 -58 -90 -150 -220 -180 -450 - 0 0 0
over 10 -50 -32 -16 0 0 0 0 0 0 +215 +550 +1350 +70 +110 +180
up to 18 -160 -59 -43 -11 -27 -70 -110 -180 -270 -215 -550 -1350 0 0 0
over 18 -65 -40 -20 0 0 0 0 0 0 +260 +650 +1650 +84 +130 +210
up to 30 -195 -73 -53 -13 -33 -84 -130 -210 -330 -260 -650 -1650 0 0 0
over 30 -80 -50 -25 0 0 0 0 0 0 +310 +800 +1950 +100 +160 +250
up to 50 -240 -89 -64 -16 -39 -100 -160 -250 -390 -310 -800 -1950 0 0 0
over 50 -100 -60 -30 0 0 0 0 0 0 +370 +950 +2300 +120 +190 +300
up to 80 -290 -106 -76 -19 -46 -120 -190 -300 -460 -370 -950 -2300 0 0 0
over 80 -120 -72 -36 0 0 0 0 0 0 +435 +1100 +2700 +140 +220 +350
up to 120 -340 -126 -90 -22 -54 -140 -220 -350 -540 -435 -1100 -2700 0 0 0
over 120 -145 -85 -43 0 0 0 0 0 0 +500 +1250 +3150 +160 +250 +400
up to 180 -395 -148 -106 -25 -63 -160 -250 -400 -630 -500 -1250 -3150 0 0 0
over 180 -170 -100 -50 0 0 0 0 0 0 +575 +1450 +3600 +185 +290 +460
up to 250 -460 -172 -122 -29 -72 -185 -290 -460 -720 -575 -1450 -3600 0 0 0
over 250 -190 -110 -56 0 0 0 0 0 0 +650 +1600 +4050 +210 +320 +520
up to 315 -510 -191 -137 -32 -81 -210 -320 -520 -810 -650 -1600 -4050 0 0 0
Angled ramping with solid carbide cutters is possible at an angle of 3° to 6° depending on the cutter type. A protective edge chamfer or corner radius is an advantage.
Tolerance table
Using tapered milling cutters in various positions of the cutting edge different effective diameters cut into the material, the following has to be observed when calculating the cutting parameters:
- To determine the rpm, the largest diameter must be used in line with the cutting data table
- To determine the feedrate, the smallest diameter must be used in line with the cutting data table
Solid Carbide milling cutters