VC-22D ElectronicValve Controller
To Optional Remote Computer Control (Local)
Computer Optional Remote Control
Optional Remote Control Modem Modem
Main Transmission Line
CLA-VAL Model 133-01Metering & Flow Rate Controller
Computer
T T VC-22D
Schematic DiagramItem Description1 100-01 Hytrol Main Valve2 CS2S Solenoid Control3 CK2 Solenoid By-Pass4 VC-22D Electronic Controller5 X117 Series Position Transmitter6 DPT Differential Pressure Transmitter7 CK2 Isolation Valve
Optional FeaturesItem DescriptionA X46A Flow Clean StrainerB CK2 Isolation ValveC CV Flow Control (Closing)D Check FeatureF Independent Operation PressureH Atmospheric DrainP X141 Pressure GaugeS CV Flow Control (Opening)Y X43 "Y" Strainer Typical Applications
The Model 133-01 Metering and Flow Rate Controller is typically installed in a fluiddelivery system where the flow rate is measured and changed from a remote locationsuch as a SCADA system.
The Cla-Val Model 133-01 Metering Valve is a completely self con-tained valve and control system that accurately meters and/orcontrols flow rate when used on valves with pressure differentialsof less than 100 psid.
Using a VC-22D Electronic Controller, data from valve mounted differen-tial pressure and position transmitters are assimilated into a proprietaryalgorithm program that is based on valve size and configuration toarrive at a flow measurement. This information is used for retransmis-sion and/or compared with a local or remote set-point for valve flowcontrol.
The 133-01 Control System can also be installed on new or existinghydraulic pilot control valves such as: pressure reducing, pressuresustaining, flow limiting and level control to transmit flow rate with-out disturbing the valve's primary hydraulic function(s). Specify Kit133-01 for these applications. Consult factory.
For all applications, specify voltage, minimum/maximum pressuresand flow rates, valve size, pressure class and optional features.Consult your local representative or the Factory for engineering assis-tance and valve selection.
• Automatically Measures and Controls Flow Rate Without a Separate Metering Device • Completely Self Contained• Reliable Analog Communications• Retransmission Capabilities• Ideal for Retrofitting Existing Valves• Security System to Prevents Unauthorized Changes• Optional Totalizing Capabilities
Metering ValveMODEL 133-01
Model 133-01 (Uses 100-01 Hytrol Main Valve)
Model 133-01 Dimensions (Inches)
Component Standard Material CombinationsBody & Cover Ductile Iron Cast Steel Bronze
Available Sizes 3" - 36"80 - 900mm
3" - 16"80 - 400mm
3" - 16"80 - 400mm
Disc Retainer &Diaphragm Washer Cast Iron Cast Steel BronzeTrim: Disc Guide, Seat & Cover Bearing
Bronze is StandardStainless Steel is Optional
Disc Buna-N® RubberDiaphragm Nylon Reinforced Buna-N® RubberStem, Nut & Spring Stainless SteelFor material options not listed, consult factory.Cla-Val manufactures valves in more than 50 different alloys.
Materials
GGGG
DDDDInlet
AAAA
X
100-01Grooved
EE
CC(MAX)
K
J
H
Inlet Outlet
B (Diameter)
Y
Z
GGGGGG
DInletDDDDD
FFF
X
100-01Threaded &
Flanged
A
E
C(MAX)
K
J
H
Inlet Outlet
AAAAA
B (Diameter)
Valve Body & CoverPressure Class
Flanged Grooved Threaded
Grade Material ANSIStandards*
150Class
300Class
300Class
End‡Details
ASTM A536 Ductile Iron B16.42 250 400 400 400
ASTM A216-WCB Cast Steel B16.5 285 400 400 400
UNS 87850 Bronze B16.24 225 400 400 400
Note: * ANSI standards are for flange dimensions only. Flanged valves are available faced but not drilled. ‡ End Details machined to ANSI B2.1 specifications.
Valves for higher pressure are available; consult factory for details
Pressure Ratings (Recommended Maximum Pressure - psi)
Valve Size (Inches)A ThreadedAA 150 ANSIAAA 300 ANSIAAAA Grooved EndB DiameterC MaximumCC Maximum Grooved EndD ThreadedDD 150 ANSIDDD 300 ANSIDDDD Grooved EndEEE Grooved EndF 150 ANSIFF 300 ANSIG ThreadedGG 150 ANSIGGG 300 ANSIGGGG Grooved EndH NPT Body TappingJ NPT Cover Center PlugK NPT Cover TappingStem TravelApprox. Ship Weight (lbs)Approx. X Pilot SystemApprox. Y Pilot SystemApprox. Z Pilot System
12.5012.0013.2512.509.128.197.256.256.006.386.002.063.123.754.134.504.004.384.250.500.500.500.8070151111
3
15.0015.6215.0011.5010.629.31
7.507.887.503.194.254.505.00
5.005.315.000.750.750.751.10140171212
4—
—
—
20.0021.0020.0015.7513.3812.12
10.0010.50
—4.316.005.506.25
6.006.50—
0.750.750.751.70285292020
6—
—
—
—
8
25.3826.3825.3820.0016.0014.62
12.6913.25
5.317.566.757.50
8.008.50
1.001.001.002.30500312222
—
—
—
—
—
10
29.7531.12
23.6217.12
14.8815.56
9.25
8.008.75
8.629.31
1.001.001.002.80780332424
—
—
—
—
—
—
—
—
12
34.0035.50
28.0020.88
17.0017.75
10.75
9.5010.25
13.7514.50
1.001.251.003.401165362626
—
—
—
—
—
—
—
—
14
39.0040.50
32.7524.19
19.5020.25
12.62
10.5011.50
14.8815.62
1.001.501.004.001600
402929
—
—
—
—
—
—
—
—
16
41.3843.50
35.5025.00
20.8121.62
15.50
11.7512.75
15.6916.50
1.002.001.004.502265
403030
—
—
—
—
—
—
—
—
18
46.0047.64
41.5039.06
12.95
15.0015.00
1.001.001.005.102982
433232
—
—
—
—
——
—
—
——
—
—
20
52.0053.62
45.0041.90
15.00
16.5016.50
1.001.001.005.633900473434
—
—
—
—
——
—
—
——
—
—
24
61.5063.24
53.1643.93
30.7531.62
17.75
19.2519.25
22.0622.90
1.001.001.006.756200
683939
—
—
—
—
—
—
—
—
30
63.0064.50
56.0054.60
21.31
22.5024.00
2.002.002.007.507703
794042
—
—
—
—
——
—
—
——
—
—
36
72.7574.75
66.0059.00
24.56
28.5030.00
2.002.002.008.50
11720854547
—
—
—
—
——
—
—
——
—
—
Valve Size (mm)A ThreadedAA 150 ANSIAAA 300 ANSIAAAA Grooved EndB DiameterC MaximumCC Maximum Grooved EndD ThreadedDD 150 ANSIDDD 300 ANSIDDDD Grooved EndEEE Grooved EndF 150 ANSIFF 300 ANSIG ThreadedGG 150 ANSIGGG 300 ANSIGGGG Grooved EndH NPT Body TappingJ NPT Cover Center PlugK NPT Cover TappingStem TravelApprox. Ship Weight (kgs)Approx. X Pilot SystemApprox. Y Pilot SystemApprox. Z Pilot System
150
508533508400340308
254267—
110152140159—
152165—
0.750.750.7543
129737508508
—
—
100
381397381292270236
19120019181108114127
1271351270.750.750.752864432305305
—
—
—
200
645670645508406371
322337
135192171191
203216
1.001.001.0058227788559559
——
——
——
——
——
250
756790
600435
378395
235
203222
219236
1.001.001.0071
354839610610
—
—
—
—
—
—
—
—
300
864902
711530
432451
273
241260
349368
1.001.251.0086528915661661
—
—
—
—
—
—
—
—
350
9911029
832614
495514
321
267292
378397
1.001.501.00102726
1016737737
—
—
—
—
—
—
—
—
400
10511105
902635
528549
394
298324
399419
1.002.001.00114
10271016762762
—
—
—
—
—
—
—
—
450
11681210
1054992
329
381381
1.001.001.00130
13531093813813
—
—
—
—
——
—
—
——
—
—
500
13211326
11431064
381
419419
1.001.001.0014317691194864864
—
—
—
—
——
—
—
——
—
—
600
15621606
13501116
781803
451
489489
560582
1.001.001.00171
28121728991991
—
—
—
—
—
—
—
—
750
16001638
14221387
541
572610
2.002.002.00190
3494200710161067
—
—
—
—
——
—
—
——
—
—
900
18481899
16761499
624
724762
2.002.002.00216
5316215911431194
—
—
—
—
——
—
—
——
—
—
80318305337318232208184159152162152527995
1051141021111080.500.500.502032
381280280
Model 133-01 Dimensions (mm)
Model 133-01 Metric Dimensions (Uses 100-01 Hytrol Main Valve)
GGGG
DDDDInlet
AAAA
X
100-01Grooved
EE
CC(MAX)
K
J
H
Inlet Outlet
B (Diameter)
Y
Z
GGGGGG
DInletDDDDD
FFF
X
100-01Threaded &
Flanged
A
E
C(MAX)
K
J
H
Inlet Outlet
AAAAA
B (Diameter)
Temperature Range Water: to 180°F / 82°C
Rubber Parts: Buna-N® Rubber Synthetic
Solenoid Control Body: Brass ASTM B283
Enclosure: NEMA Type 1,2,3,3S,4,4X general purpose watertight NEMA Type 6,6P,7,9 watertight explosion proof available
Voltage: 24, 120, 240, 480 - 60Hz AC 24 - DC
Max. operating pressure differential: 100 psi
Coil: Insulation Molded Class F Watts AC 6 AC Volt Amps Inrush 30 AC Volt Amps Holding 16 Watts DC 10.6
*For specifications on other 133 Series Valves, please consult factory. The 133-01 is shown.
Pilot System Specifications*
133-01Valve
Selection
100-01 Pattern: Globe (G), Angle (A), End Connections: Threaded (T), Grooved (GR), Flanged (F) Indicate Available Sizes
Inches 3 4 6 8 10 12 14 16 18 20 24 30 36
mm 80 100 150 200 250 300 350 400 450 500 600 750 900
MainValve
100-01
Pattern G, A G, A G, A G, A G, A G, A G, A G, A G G G, A G G
End Detail T, F,Gr
F, Gr
F, Gr*
F, Gr* F F F F F F F F F
Suggested Flow (gpm)
Maximum 460 800 1800 3100 4900 7000 8400 11000 14000 17000 25000 42000 50000
Maximum Intermittent 580 990 2250 3900 6150 8720 10540 13700 17500 21700 31300 48000 62500
Suggested Flow
(Liters/Sec)
Maximum 29 50 113 195 309 442 530 694 883 1073 1577 2650 3150
Maximum Intermittent 37 62 142 246 387 549 664 863 1104 1369 1972 3028 3940
100-01 Series is the full internal port Hytrol. *Globe Grooved Only
CLA-VAL EUROPEChemin des Mésanges 1CH-1032 Romanel/Lausanne, SwitzerlandPhone: 41-21-643-15-55www.cla-val.chE-mail: [email protected]
CLA-VAL FRANCEPorte du Grand Lyon 1ZAC du Champ du PérierFrance - 01700 NeyronPhone: 33-4-72-25-92-93www.cla-val.chE-mail: [email protected]
CLA-VAL1701 Placentia Avenue • Costa Mesa, CA 92627
800-942-6326 • Web Site: www.cla-val.com • E-mail: [email protected]
© COPYRIGHT CLA-VAL 2021 Printed in USA Specifications subject to change without notice. visit www.cla-val-latinamerica.com for Spanish literature
CLA-VAL CANADA4687 Christie DriveBeamsville, OntarioCanada L0R 1B4Phone: 905-563-4963www.cla-val.comE-mail [email protected]
CLA-VAL UKDainton House, Goods Station RoadTunbridge Wells Kent TN1 2 DH EnglandPhone: 44-1892-514-400www.cla-val.chE-mail: [email protected]
CLA-VAL ASIA PACIFIC45 Kennaway RoadWoolston, Christchurch, 8023New ZealandPhone: 64-39644860www.cla-valpacific.comE-mail: [email protected]
E-133-01 with VC-22D Controller(R-03/2021)
When Ordering, Specify 1. Catalog No. 133-01 2. Valve Size 3. Pattern - Globe or Angle 4. Pressure Class 5. Threaded or Flanged 6. Trim Material 7. Electrical Specifications 8. Desired Options 9. When Vertically Installed
Valve Options
X101AR ValvePosition Indicatorwith Air Release
X144 e-FlowMeter
X101 Valve Position
Indicator
X141PressureGauge
X43HStrainer
StainlessSteel Pilot