1500-1700Pcs/H Egg Tray Machine
Production Line
1. Outline
The project uses waste paper, waste paper as raw material to produce egg
tray. This section consists of four parts production line(That pulping system,
molding system, drying systems, packaging systems) ;The following is the
name of the individual equipment, Brief specifications and equipped with a
motor, etc.)
technical data of egg tray machine
Machine type SF-1*4 egg tray machine
Raw material Waste paper, waste bin
Production varieties Egg tray, paper tray
Production speed 1500-1700piece/ hour
Total power 58KW
Pulp concentration for forming machine 0.8-1%
Pressure of compressed air 0.5-0.7Mpa
Vacuum negative pressure minus 0.035--- minus 0.045Mpa
Voltage 380 V
Frequency 50 Hz
A. Pulp Machine
Item
Type
Qty
(set)
Motor Power
(KW)
Hydro-pulper
Function:Raw materials
1.2m3 1 7.5KW
Discs refiner
Function:Further refining more fine.
250mm 1 7.5KW
1# Pulp pump 3inch 1 2.2KW
Function : Extract the paper pulp
(transport every devices slurry).
1#,2# Slurry tank mixer
Function:Mixing effect, to fully mix the
pulp with water。
120
100
2 2.2KW
1.5KW
Vacuum tank
1
Drying System Introduction
Drying method Burning material Introduction
Cement construction Drying Passage
Coal, natural gas,
oil(fuel different price
different)
Provided by the customer bricks,
cement and so on, the user is
currently making the factory
floor.
C. Drying System(Dry burning material: Gas/Diesel)
The device utilization Cement construction Drying Road.
Drying Road Long:30m
Item
Type
Qty(set)
Motor Power(KW)
Steel wire transfer
75m
Burner
Uniform wind deflector
28
FOB(Qingdao) Price: USD 29,200.00
A. Technical service:
1. Our company is responsible for decision, installation, debugging and training
technical personnel,give a qualified line to the buyer. We will send 1 engineers,
the buyer is responsible for the engineer′s salary,$2500 per month and the
engineer′s room and eat, travel expenses, visa fees and so on.
2. Provide a full of paper pulp equipment and information。
3. Quote validity period:90 days.
4. Time of delivery:25days.
5. Payment: 30%TT in advance ,70% T/T when the Before delivery
6.Customer need to buy Process piping, valves and components, wires, cables,
trunking ,stents, and other supporting material of production line installation
Qinyang City Shunfu Paper Making Machinery Co., Ltd.
Mr. Dan
Mobile Phone: 0086 15978722592
TEL: +86-391-5939370, +86-391-5939222
FAX: +86-391-5937555
Email: [email protected] [email protected]
Wechat: dx654471610
Viber and WhatsApp is my Mobile number
Skype: shunfu168
Website: www.shunfu3158.com