+ All Categories
Home > Documents > 15kW Bi-Directional Charger - Leonardo DRSOur 15kW Bi-Directional charger (BDC-15) functions as an...

15kW Bi-Directional Charger - Leonardo DRSOur 15kW Bi-Directional charger (BDC-15) functions as an...

Date post: 28-Feb-2020
Category:
Upload: others
View: 9 times
Download: 0 times
Share this document with a friend
2
drs.com/powersolutions | [email protected] RELIABLE, COMPACT POWER FOR HYBRID ELECTRIC VEHICLE (HEV) AND EXTENDED RANGE ELECTRIC VEHICLES (E-REV) DRS Technologies delivers high quality and reliable power conversion solutions wherever mission critical operations require them. Our 15kW Bi-Directional charger (BDC-15) functions as an inverter and battery charger. This dual-mode functionality makes it possible to charge electric or plug-in hybrid electric vehicles and export power from the vehicle for general use. Our inverters are a game-changing replacement for on-board or tow-behind generators, turning the vehicle themselves into a reliable power source. Now you can simplify your operations by not having to move a generator from place to place, reduce costs for fuel and maintenance, and increase productivity by powering your operations directly from your vehicle with our BDC-15. In charging mode, the BDC-15 can be used with standard 120VAC outlets (SAE Level 1) or with high- speed commercial charging equipment (SAE Level 2 charging at 70A). When in export mode, the unit converts stored onboard energy from the vehicle’s battery to clean and usable AC power. Designed to perform reliably in harsh environmental conditions, the BDC-15 is sealed against sand, dust, and water and is submersible up to one meter. Additionally, it is small and compact, which allows for multiple mounting locations and orientations on the vehicle. Specific applications include: Hybrid utility fleet vehicles, hybrid shuttle buses, Hybrid transit buses, and disaster relief vehicles. Once installed, the device can be used to run power tools, pumps, lights, temperature control units, small appliances, computers, and more. HIGHLIGHTS • Vehicle charging and export power capability • Satisfies IP67 rating for harsh environments • Provides 15kW of charging capability utilizing the SAE J1772 standard • Provides mobile, remote, back-up and emergency power • Features vehicle-to-grid capability 15kW Bi-Directional Charger
Transcript
Page 1: 15kW Bi-Directional Charger - Leonardo DRSOur 15kW Bi-Directional charger (BDC-15) functions as an inverter and battery charger. This dual-mode functionality makes it possible to charge

drs.com/powersolutions | [email protected]

RELIABLE, COMPACT POWER FOR HYBRID ELECTRIC VEHICLE (HEV) AND EXTENDED RANGE ELECTRIC VEHICLES (E-REV)

DRS Technologies delivers high quality and reliable power conversion solutions wherever mission critical operations require them. Our 15kW Bi-Directional charger (BDC-15) functions as an inverter and battery charger. This dual-mode functionality makes it possible to charge electric or plug-in hybrid electric vehicles and export power from the vehicle for general use.

Our inverters are a game-changing replacement for on-board or tow-behind generators, turning the vehicle themselves into a reliable power source. Now you can simplify your operations by not having to move a generator from place to place, reduce costs for fuel and maintenance, and increase productivity by powering your operations directly from your vehicle with our BDC-15.

In charging mode, the BDC-15 can be used with standard 120VAC outlets (SAE Level 1) or with high-speed commercial charging equipment (SAE Level 2 charging at 70A). When in export mode, the unit converts stored onboard energy from the vehicle’s battery to clean and usable AC power.

Designed to perform reliably in harsh environmental conditions, the BDC-15 is sealed against sand, dust, and water and is submersible up to one meter. Additionally, it is small and compact, which allows for multiple mounting locations and orientations on the vehicle.

Specific applications include: Hybrid utility fleet vehicles, hybrid shuttle buses, Hybrid transit buses, and disaster relief vehicles. Once installed, the device can be used to run power tools, pumps, lights, temperature control units, small appliances, computers, and more.

HIGHLIGHTS • Vehicle charging and export power capability • Satisfies IP67 rating for harsh environments • Provides 15kW of charging capability utilizing

the SAE J1772 standard• Provides mobile, remote, back-up and

emergency power• Features vehicle-to-grid capability

15kW Bi-Directional Charger

Page 2: 15kW Bi-Directional Charger - Leonardo DRSOur 15kW Bi-Directional charger (BDC-15) functions as an inverter and battery charger. This dual-mode functionality makes it possible to charge

141 North AveBridgeport, CT 06606800-438-8774 drs.com/powersolutions | [email protected]

15kW Bi-Directional Charger

Specifications subject to change without notice.

Copyright 2013. DRS Power Solutions.

EXPORT POWER MODEINPUT SPECIFICATIONSInput configuration DC, ungroundedInput voltage (continuous) 250-420 VDCInput current 45 RMS AmpsInput insulation voltage 2500 VDC input to ground and input to outputInput insulation resistance Greater than 10M Ohms @ 500 VDC

OUTPUT SPECIFICATIONSOutput configuration AC, single phase, three wire, grounded neutralOutput voltage 120/240 VAC +/-3VACOutput distortion (THD) Less than 3% sinewave outputOutput current (continuous) L1&L2 rated 60A each; neutral rated at 40AOutput current (surge) 140% (10 sec)Ouput frequency 60Hz +/-0.1HzOutput power 14,400 watts Output protection Short circuit, over temperature, GFCI Class A Per UL943 Efficiency Greater than 85%Output insulation voltage 2250 VDC output to chassis

ENVIRONMENTAL SPECIFICATIONSEMI CISPR 12, CISPR 25, FCC Part 15 Class AVibration GMW3172, Chassis Location Code CCollision and Pothole Shock GMW3172Ingress Protection IP6K9K as per GMW3172Immersion IP67 as per IEC-529Ambient Temperature -40° to 85°CCoolant Temperature -40° to 60°CControl and Communications CANBUS per SAE J1939

GENERAL SPECIFICATIONSDimensions (H x W x D) 300mm x 603mm x 300mm 6.50in x 23.74in x 11.81inWeight 85 lbCooling Liquid Cooling

BATTERY CHARGE MODEINPUT SPECIFICATIONSInput configuration AC, single phase, two wire plus groundInput voltage (continuous) 90-265 VACInput current (maximum) 70A @208-240 VAC or 16 @120V ACInput power factor Greater than 0.98%Input frequency 57-63 HzInput insulation voltage 2500 VDC input to output, 2250 input to ground

OUTPUT SPECIFICATIONSOutput configuration DC, ungroundedOutput voltage 250-420 VDC Output current 45A RMSOutput power 15,000WOutput protection Open circuit, over temperatureEfficiency Greater than 87%

07/21/15


Recommended