2
Hammond Mfg. Co. Ltd., Electronics Division www.hammondmfg.com Dimensions A 3.250” ±0.063 D 2.813” ±0.063 B 2.085” ±0.125 G 0.187” X 0.300” C 1.995” ±0.063 ±0.015 Primary Brown-Blue Inductance Impedance 21.60H 129 KOhm 0.410 Ohm 0.540 Ohm 0.830 Ohm @ 1.0 kHz, 1.0 V OC 1760E TUBE GUITAR AMPLIFIER - OUTPUT TRANSFORMER 4, 8 & 16 Ohms 15W Output Impedance Output Power ELECTRICAL SPECIFICATIONS Characteristics Typical Input Impedance 8500 Ohms • Designed for drop in replacement of original units. • Constructed to look similar to original factory units (where possible). • Material used & design specifications were kept as close as possible to the original part to preserve the stock "tone". • Open style with minimum 9" long primary and secondary leads • Frequency response 70Hz - 15KHz (0/-1dB reference @ 1KHz) • Distortion is less than 1% @ 70Hz TYPICAL TEST CIRCUIT Dielectric Strength Temperature Range TEST CONDITIONS 1500VRMS -40 to 105 degC @ 1.0 kHz, 1.0 V SC Leakage Inductance 154.40 Ohms DCR Primary Brown-Red Secondary Black-Yellow Secondary Black-Green Secondary Black-White Primary Red-Blue 159.20 Ohms Measurement instruments: D scope series iii audio analyzer Keithley 2010 DVM Wayne Kerr 3255B with a 3265B Hp4192a impedance analyzer * All graphs input level 27dBu @1.0KHz reference. **The results are typical and are subject to normal manufacturing and electrical tolerances. 323.9mH Primary Brown-Blue PRIMARY SECONDARY R L RS / 2 RS / 2 OUT BRN BLU BLK COM WHT RED 15 WATTS 70Hz - 15kHz 8500 CT 16 Ohm YEL 4 Ohm GRN 8 Ohm Ohm PRIMARY SECONDARY BLU NOTE: ALL LEADS 9" LONG MIN. DATE BRN - RED - BLU: 8500 CT 1760E MADE IN CANADA RED BLK/YEL/GRN/WHT: COM/4 /8 /16 D G A B C 15 WATTS 70Hz - 15kHz BRN GRN BLK YEL WHT HAMMOND MANUFACTURING www.hammondmfg.com
![Multisim 14.1 Power Pro ComponentsMultisim 14.1 Power Pro Components Page 1 of 785 0 Ohm [CAT10-000J4LF] 0 Ohm [CAT16-000J2GLF] 0 Ohm [CAT16-000J2LF] 0 Ohm [CAT16-000J4GLF]](https://static.documents.pub/doc/80x56/5f50c78d85d2ce148a6061d9/multisim-141-power-pro-components-multisim-141-power-pro-components-page-1-of.jpg)
