18 FOOTRESTS & LICENSE PLATE FRAMES (Pédalier, support de plaques) 2010

291007

All part numbers in BOLD MAGENTA are new for 2010.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1008

PART # DESCRIPTION SUG. RETAILFOR 04-10 XL MODELS1622-0140 Standard position, chrome $414.951622-0349 Standard position, black 389.951622-0141 2” extended, chrome 469.951622-0350 2” extended, black 449.95REPLACEMENT COMPONENTS1622-0143 Shift shaft lever (trans), chrome 24.951622-0351 Shift shaft lever (trans), black 25.951622-0144 Brake pedal, chrome 57.951622-0352 Brake pedal, black 49.951622-0146 Footpegs, chrome (pr.) 37.951622-0353 Footpegs, black (pr.) 37.95

FORWARD CONTROL KITS•Chrome-plated or black anodized steel forward controls•Replace OEM forward controls or convert from mid-controls•Include rubber insert footpegs, shift peg and mounting hardware; use stock brake master cylinder

NOTE: Not for use with 2-1 exhaust systems.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLST MODELSDS-243531 Forward controls (includes 3/4” master

cylinder – Kelsey-Hayes) $483.95DS-243523 2” extended forward controls (includes

3/4” master cylinder – Kelsey-Hayes) 435.951602-0072 Repl. shift lever shaft 24.901602-0081 Repl. shift lever 29.951610-0013 Repl. brake pedal 56.95FOR 84-94 FXR MODELSDS-243485 Forward controls 281.951602-0073 Repl. shift lever shaft 19.951602-0082 Repl. shift lever 19.951610-0014 Repl. brake pedal 56.95

FORWARD CONTROLS•Updated forward controls come complete with brake and shift forward controls

•Chrome-plated mounts and hardware; come complete with O-ring footpegs

•Will not work with engine guards

NOTE: When installing extended forward controls, check fender clearance before operating.

NOTE: PART #s DS-243531 and DS-243523 require custom brake line.

PART # DESCRIPTION SUG. RETAILFOR L87-03 XL (EXCEPT 883R W/ 2-1 EXHAUST)DS-243528 Forward controls $369.951602-0074 Repl. shift lever 27.951601-0166 Repl. shift linkage kit 52.951610-0015 Repl. brake pedal 38.95

FORWARD CONTROLS WITHOUT PEGS•Kit includes chrome motor mounts, shifter arm, brake pedal, linkage rods for brake and shifter and mounting hardware

•Accept most styles of footpegs and shifter pegs (must be purchased separately)

NOTE: Controls are compatible with 883/1200C styles of exhaust only. Not for use with some types of highway bars.

NOTE: Not for use with 2-1 exhaust systems.

FORWARD CONTROL KIT•Sturdy steel construction•Polished with a brilliant chrome finish•Footpegs and shift peg not included; use standard pegs to achieve the look you want

•Use stock rear master cylinder•Includes all necessary mounting hardware•2” extension kit available separately


PART # DESCRIPTION SUG. RETAILFOR 06-10 FXD MODELS1622-0193 Forward controls kit $319.951622-0194 2” extension kit 99.95

PART # DESCRIPTION SUG. RETAILFOR 00-06 FXST MODELS1622-0338 Forward controls $574.951603-0099 Repl. shift peg 24.951610-0138 Repl. brake peg 25.951620-0677 Footpegs (pr.) 94.951622-0192 Adapter kit for FXSTD 24.95

FORWARD CONTROLS•Billet-aluminum construction•Polished with a brilliant chrome finish•Includes master cylinder and all necessary mounting hardware•Knurled shift and brake pegs included; footpegs sold separately•Adapter kit for FXSTD available separately

1622-0140

1622-0140 Left

1622-0140 Right

DS-243531Right side

DS-243528

1622-0193

1622-0192

1620-06771622-0338

1601-0166

DS-243531

DS-243485


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1009

BILLET ALUMINUM FORWARD CONTROLS•Available in a chrome, highly polished and black finish

•Shifter and brake pedal adjust to suit individual preference

•Master cylinders feature long-wearing bronze bushings, nylon thrust washers and micro-finished 5/8” bores

•Available in classic and radial designs with wide-band pegs•Made in the U.S.A. with domestic materials

NOTE: 07-10 Softails require the use of a 00-06 kickstand assembly.

NOTE: Must order shifter control rod separately for Big Twin kits, or use a custom rod with 13” to 15” center-to-center length.

PART # SUG. RETAIL1622-0148 $805.951622-0149 805.951622-0150 805.951622-0154 805.95

PART # SUG. RETAIL1622-0155 $690.951622-0156 805.951622-0157 805.951622-0158 690.95

PART # SUG. RETAIL1622-0159 $805.951622-0160 805.951622-0161 805.951622-0167 805.95

PART # SUG. RETAILDS-243290 $690.95DS-243292 805.95DS-243296 805.95DS-243505 805.95

PART # SUG. RETAILDS-243506 $805.95DS-243507 805.95DS-243674 805.95DS-243706 690.95

PART # SUG. RETAILDS-243729 $690.95DS-243752 690.95

J-SERIES FORWARD CONTROLS•Design features internal reservoir and hidden banjo fittings for sleek look

•Constructed of billet aluminum

•Include 9/16” bore master cylinder•Can be mounted with or without crash bar•Stock kick stand can be mounted to controls with included mounting block

•Available in chrome, polished, or black-anodized finish•Sold as a set•Made in the U.S.A.with domestic materials


J-FX FORWARD CONTROLS•Fully-adjustable pegs and pedals to allow for the perfect fit

•Constructed of steel and billet aluminum•All steel components are powder coated black; aluminum components are available with chrome or black anodized finishes

•Utilize stock mounts and master cylinder•Sold as a set•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, FLST1622-0361 Chrome $695.951622-0363 Chrome, multi-band 695.95

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, FLST (CONT)1622-0362 Black $695.951622-0364 Black, multi-band 695.95

1622-0362Right side

DS-243706Left side

Radial Slotted Chrome

Classic Solid Chrome

DS-243706Right side

DS-243674 Left side

DS-243674 Right side

1622-0362Left side

1622-0363Left side

1622-0363Right side

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, FLST1622-0163 Chrome $920.951622-0162 Polished 805.951622-0164 Black 920.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLST, 85 FX1622-0152 Chrome $920.951622-0151 Polished 805.951622-0153 Black 920.95

DESCRIPTION CLASSIC SOLID RADIAL SLOTTEDFOR 00-10 FXST, FLSTChrome DS-243296 DS-243292Polished - DS-243290Black 1622-0161 1622-0167FOR 84-99 FXST, FLST, 73-85 FX, FLHChrome DS-243505 DS-243674Polished DS-243706 -

DESCRIPTION CLASSIC SOLID RADIAL SLOTTEDFOR 84-99 FXST, FLST, 73-85 FX, FLH (CONT)Black 1622-0148 1622-0154FOR 91-10 DYNA GLIDEChrome DS-243507 1622-0159Polished DS-243752 1622-0158Black 1622-0150 1622-0160

DESCRIPTION CLASSIC SOLID RADIAL SLOTTEDFOR 84-94, 99-00 FXR, 86-03 XL1

Chrome DS-243506 1622-0156Polished DS-243729 1622-0155Black 1622-0149 1622-01571 XL models require mounting adapter kit

PART #DS-243508 for 86-90 and PART #DS-243509 for 91-03.

NOTE: Shifter control rod is included with XL adapter kit.

NOTE: See footpegs pages later in this section for matching pegs.

DS-243506Left side

DS-243506Right side

Radial Slotted Black

1622-0154Right side

1622-0154Left side

1622-0162Left side

1622-0164 Left side

1622-0164 Right side

1622-0162Right side

PRICE LIST

Classic Solid Polished


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1010

PART # DESCRIPTION SUG. RETAILFOR 09-10 FLHT, FLHR, FLHX, FLTR1622-0287 Chrome, full rubber $595.951622-0288 Chrome multi-band 595.951622-0289 Black, full rubber 595.951622-0290 Black multi-band 595.95

PART # DESCRIPTION SUG. RETAILFOR 08 FLHT, FLHR, FLHX, FLTR1622-0189 Chrome, full rubber $595.951622-0283 Chrome multi-band 595.951622-0190 Black, full rubber 595.951622-0284 Black multi-band 595.95

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLT, FLHT, FLHR, FLHX, FLTR1622-0165 Chrome, full rubber $595.951622-0281 Chrome multi-band 595.951622-0166 Black, full rubber 595.951622-0282 Black multi-band 595.95

J-FL SERIES FORWARD CONTROLS•The style and feel of forward controls designed specifically for baggers and touring models•Constructed of steel and billet aluminum•Utilize stock mounts, pivot points and master cylinder•Can be mounted with or without crash bar•Stock kick stand can be mounted to controls with included mounting block•All steel components have a powder-coat black finish; billet aluminum components are available with chrome or black-anodized finish•Sold as a set•Made in the U.S.A. with domestic materials

PART # DESCRIPTIONSUG.

RETAILDS-243513 Master cylinder rebuild kit for JayBrake billet

aluminum forward controls w/ 3/4” master cylinder $24.95DS-243463 Master cylinder rebuild kit for JayBrake billet

aluminum forward controls w/ 5/8” master cylinder 24.95DS-243464 Master cylinder rebuild kit for JayBrake J-Series

foward controls w/ 9/16” master cylinder 24.951622-0280 XL adapter kit for 04-10 5-speed w/ rubber-mounted

engine (use w/ FXR model forward control kit) 270.95DS-243509 XL adapter kit for 91-03 5-speed

(use w/ FXR model forward control kit) 270.95DS-243508 XL adapter kit for 86-90 4-speed

(use w/ FXR model forward control kit) 270.95DS-243511 Stainless steel shifter control rod for Big Twin

forward control sets (holes 14” center-to-center) 54.95DS-243514 Repl. wide band footpeg rubbers (8-pk.)

for two footpegs 18.95DS-243517 Repl. wide band shifter peg rubbers (4-pk.) 8.95DS-243518 Repl. wide band passenger footpeg rubber set

(for two pegs) 18.95

REBUILD KITS, ADAPTERS AND REPLACEMENT PARTS

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST/FLST1622-0180 Stock length, chrome $999.951622-0182 Stock length, black 999.951622-0181 +3” length, chrome 999.951622-0183 +3” length, black 999.95FOR 86-99 FXST/FLST1622-0339 Stock length, chrome 999.951622-0341 Stock length, black 999.951622-0340 +2” length, chrome 999.951622-0342 +2” length, black 999.95

BILLET FORWARD CONTROLS•CNC-machined billet aluminum construction•Sleek design uses lever pivot for footpeg mount•Choose from chrome or black finish•Available in stock, +2” and +3” lengths•Includes footpegs and brake/shifter pegs•Made in the U.S.A.

NOTE: 3” extended kits will require a custom brake line.

NOTE: 07-10 applications will require the use of an 00-06 style kickstand assembly.

1622-0280 DS-243509

1622-0165Left side

1622-0281Left side

1622-0166Left side

1622-0341Left side

1622-0180 Left side

1622-0165Right

1622-0165Left


1622-0341Right side

1622-0165Right side

DS-243511

1622-0281Right side

1622-0166Right side


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1011

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST/FLST1622-0345 Chrome $1,199.951622-0346 Contrast Cut 1,199.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST/FLST1622-0343 Chrome $1,199.951622-0344 Contrast Cut 1,199.95

CONTOUR FORWARD CONTROLS•High-quality billet aluminum and steel construction•11/16” master cylinder integrates racing technology in both push rod and piston for less effort at pedal•Fully-adjustable shift lever and brake arm ride on Teflon bearings•Utilizes stock H-D kickstand and return spring unless noted•Brake-side pedal is mounted forward of footpeg for immediate braking response•Includes contour rubber-insert footpegs and toe pegs•Available in chrome and Contrast Cut™ finishes•Contrast Cut finish starts with a polished forward control that has been black anodized then recut to open up the design

NOTE: 07-10 FXST/FLST models will require the use of a 00-06 kickstand assembly.

PART # DESCRIPTION SUG. RETAILDS-194680 For 00-10 FXST and FLST models $1,049.95DS-194683 For 00-10 FXST and FLST models (3” extended) 1,049.95DS-222814 For 84-99 Softail models 1,049.95DS-222815 For 84-99 Softail models (3” extended) 1,049.95DS-222802 Master cylinder rebuild kit (3/4” bore, late style) 34.95DS-222818 Master cylinder rebuild kit (5/8” bore, early style) 37.950510-0084 Kickstand kit for 07-10 models 99.95

NESS-TECH® CHROME RADIUS FORWARD CONTROL KITS•Radius design with integrated 3/4” master cylinder; feature hidden master cylinder linkage•Available in stock or 3” extended versions (3” extended for FX, FL and FXST/FLST models only)•Footpegs and shifter pegs are not included, must be purchased separately

•Kits require one pair of male mount footpegs and two shifter pegs

NOTE: Footpegs and toe pegs are not included; must be ordered separately.

NOTE: 3” extended kits will require a custom brake line; check fender clearance before operating.

NOTE: 07-10 models require kickstand kit PART # 0510-0084; sold separately.

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST/FLST1622-0170 Chrome $949.951622-0171 Black 949.950510-0084 Kickstand kit for 07-10 models 99.95

RETRO FORWARD CONTROLS•Retro styled forward controls•Available in either show quality chrome or rich black anodizing; black anodized feature machine cuts

•Include custom kickstand mount

NOTE: 07-10 models require kickstand kit.

NOTE: Footpegs and toe pegs not included; must be ordered separately.

NOTE: Check fender clearance before operating.

1622-0170 Left side


1622-0171Left side

1622-0171Right side

DS-194680Left side

DS-194680Right side

DS-222814 Right sideDS-222814Left side

1622-0345 Left side


1622-0346Left side 1622-0346

Right side


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1012

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, FXSTD1622-0010 Gothic; chrome $1,092.951622-0011 Gothic, + 3”; chrome 1,113.951622-0213 Diamond; night series 970.951622-0215 Diamond, +3”; night series 987.95DS-243441 Slotted; chrome 970.951622-0112 Slotted w/ rubber pegs; chrome 970.951622-0214 Slotted; night series 970.95DS-243444 Slotted, +3”; chrome 987.951622-0216 Slotted, +3”; night series 987.95FOR 84-99 FXST, 85-86 FX, FXWG WITHOUT KICKSTAND MOUNT HOLES1622-0221 Diamond; chrome 970.951622-0222 Diamond; night series 970.951622-0217 Diamond, -2”; chrome 970.951622-0218 Diamond, -2”; night series 970.951622-0225 Diamond, +3”; chrome 987.951622-0226 Diamond, +3”; night series 987.951622-0223 Slotted; chrome 970.951622-0224 Slotted; night series 970.951622-0219 Slotted, -2”; chrome 970.951622-0220 Slotted, -2”; night series 970.951622-0227 Slotted, +3”; chrome 987.951622-0228 Slotted, +3”; night series 987.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, 85-86 FX, FXWG1622-0012 Gothic; chrome $1,092.951622-0105 Pearl; chrome 970.951622-0102 Pearl, -2”; chrome 970.951202-1210 Diamond; chrome 970.951622-0206 Diamond; night series 970.951622-0202 Diamond, -2”; chrome 970.951622-0203 Diamond, -2”; night series 970.951622-0208 Diamond, +3”; night series 987.95DS-243451 Slotted; chrome 970.951622-0207 Slotted; night series 970.95DS-243631 Slotted, -2”; chrome 970.951622-0204 Slotted, -2”; night series 970.951622-0209 Slotted, +3”; night series 987.95DS-243067 Slotted w/ rubber pegs; chrome 970.951622-0015 Slotted w/ rubber pegs; black anodized 970.95REPLACEMENT RUBBER INSERTS FOR RUBBER PEGS1904-7540 For shifter/brake peg 8.951904-7541 For folding/male mount footpeg 8.951904-7542 For forward controls/rigid mount footpeg 8.95

FORWARD CONTROLS WITH MASTER CYLINDER•Made from billet aluminum with stainless hardware•3/4” thick mounting plates for superior strength•Feature sealed bearings on the pivot points for smooth operation and no maintenance•5/8” bore master cylinder has radius corners with side-mount brake line fitting•Shifter and brake arms are splined for complete adjustability•Available in standard, 3” extended, or 2” under applications•Also fits most custom frames•Available with a chrome-plated, Night Series or black anodized finish•All Night Series controls feature rubber pegs•Made in the U.S.A.

NOTE: 07-10 FXST models require a 00-06 style kickstand, bracket and spring plate.

NOTE: Master cylinders accept rebuild kit PART #DS-195042.

NOTE: 3” extended versions will require a custom brake line.

NOTE: Applications listed without kickstand mount holes will require a custom kickstand.

1622-0206(Diamond)

1622-0207(Slotted)

1622-0213(Diamond night series)

1622-0214(Slotted night series)

1622-0208(Diamond night series)

1622-0015(Slotted w/rubber pegs, black)

1622-0112(Slotted w/rubber pegs)

1622-0102(Pearl)

DS-243451(Slotted)


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1013

PHANTOMZ FORWARD CONTROLS•High-quality chrome billet•Available in standard and 3” extended length•Include footpegs, shift/brake pegs, a 5/8” bore master cylinder and mounting hardware

•Shift linkage rod is not included; must be ordered separately

NOTE: Controls will require a custom brake line. Matching passenger pegs PART #1620-0290 available separately.


PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAILS AND CUSTOM APPLICATIONS1622-0027 Diamond; chrome $1,050.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAILS AND CUSTOM APPLICATIONS (CONT)1622-0205 Diamond; night series $1,050.95

PART # DESCRIPTION SUG. RETAILFOR 91-10 DYNA GLIDEDS-243402 Milled; chrome $810.95DS-243078 Slotted; chrome 810.951622-0201 Slotted; night series 810.951622-0199 Diamond; chrome 810.951622-0200 Diamond; night series 810.95FOR 84-94 FXRDS-243076 Slotted; chrome 810.95FOR 09-10 FLHT, FLHX, FLHR, FLTR1622-03543 Diamond, +6”; chrome 884.951622-03553 Diamond, +6”; night series 884.951622-03563 Slotted, +6”; chrome 884.951622-03573 Slotted, +6”; night series 884.95FOR 97-08 FLHT, FLHX, FLHR, FLTR1622-02311 Slotted, +5”; chrome 953.95

PART # DESCRIPTION SUG. RETAILFOR 97-08 FLHT, FLHX, FLHR, FLTR (CONT)1622-02321 Slotted, +5”; night series $953.951622-02352 Slotted, +9”; chrome 953.951622-02362 Slotted, +9”; night series 953.951622-02291 Diamond, +5”; chrome 953.951622-02301 Diamond, +5”; night series 953.951622-02332 Diamond, +9”; chrome 953.951622-02342 Diamond, +9”; night series 953.951 Recommended for riders with 34” inseam or less. Moves foot position

rearward 5” from standard floorboard position. Will not fit with crash bar.2 Recommended for riders with 35”+ inseams. Moves foot position

forward 9” from standard floorboard position. Will not fit with crash bar.3 Recommended for riders with 30”+ inseams. Moves foot position

forward 6” from standard floorboard position. Will fit with crash bar.

PART # DESCRIPTION SUG. RETAILFOR 85-86 FX, FXWG, 84-99 FXST AND CUSTOM FRAMES1622-0138 Standard length $718.951622-0139 3” extended length 743.95

DS-243076

FORWARD CONTROLS•CNC-machined from 6061 T-6 aluminum•3/4” mounting plates for superior strength•Feature sealed bearings on the pivot points for smooth operation and no maintenance

•Assembled with chrome hardware, kit comes ready to install

•Used with existing stock master cylinder•Includes foot, shift and brake pegs, swivel joints, shift and brake rods and instructions

•Available with a chrome-plated or Night Series finish•Made in the U.S.A.


1622-0355

FORWARD CONTROLS WITH HYDRAULIC FOOT CLUTCH•CNC-machined from 6061 T-6 aluminum with hardware

•3/4” mounting plates for superior strength•Hydraulic foot clutch frees left hand for operation of hand shifter

•All feature 5/8” bore master cylinders with radius corners and side-mount banjo bolt brake line fittings

•Clutch and brake arms are adjustable•Improved alternative for foot operation of clutch compared to mechanical linkage when using jockey shifter•Feature sealed bearings on the pivot points for smooth operation and no maintenance•Available with a chrome-plated or Night Series finish•Made in the U.S.A.

NOTE: Controls will require a custom brake line and clutch hose.

1622-02051622-0027

1622-0236 1622-0230

1622-0356

1622-0138


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1014

PART # DESCRIPTION SUG. RETAILFOR 91-10 DYNA GLIDE1622-0058 Standard forward controls $399.951622-0059 3” extended forward controls 399.95

FORWARD CONTROLS•Main components are designed to fit with existing shapes on the engine, primary and frame for smooth, flowing style

•Flush countersunk fasteners on all mounting plates for a clean, uncluttered appearance

•All ball joints, linkages and visible hardware have a beautiful chrome finish

•Igus shifter bearings provide smooth, maintenance-free operation•Available in standard and extended lengths (standard recommended for riders with an inseam of 33” or less)

•Footpegs and shift lever sold separately

NOTE: Forward controls are not compatible with most engine guards.

PART # DESCRIPTION SUG. RETAIL1622-0023 For 84-99 Softail models and most

custom Softail frames $1,059.95

STAGE II CUT-OUT FORWARD CONTROLS•Features hidden brake linkage, sealed ball bearing shifter and brake arms

•Brake arm and shifter arm have a three-angle adjustment•Uniquely designed folding footpegs have built-in heel rests and offer rotational adjustment

•Master cylinder uses OEM rebuild kit #42374-86 or PART #DS-195046•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL00-10 FXST/FLST1622-0176 Ball-milled $884.951622-0179 Flamed 884.9586-99 FXST/FLST1622-0174 Ball-milled 884.95

PART # DESCRIPTION SUG. RETAIL86-99 FXST/FLST (CONT)1622-0175 Ball-milled, 2” extended $884.951622-0177 Flamed 884.951622-0178 Flamed, 2” extended 884.95

DEAD END FORWARD CONTROLS•Manufactured from 6061 T-6 billet aluminum; finished with high-quality show chrome

•Comes with ball-milled or flamed Dead End shifter and foot pegs•Pegs fold up using ball and spring detent•3/4” bore master cylinder with hidden side mount for brake line •Thunder Cycle logo 3-D machined on master cylinder cover•Made in the U.S.A.

NOTE: 07-10 applications will require the use of a 00-06 kickstand assembly.

PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAIL1622-0285 Polished $396.951622-0286 Chrome 555.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAIL (CONT)1622-0360 Gloss black $447.95

FORWARD CONTROLS•CNC-machined from billet aluminum•Unique design and features make these controls a must-have upgrade for your stock or custom motorcycle•Made in the U.S.A.

1622-0058

1622-0360

1622-0176 1622-0179

1622-0286 1622-0286Left LeftRight

Right1622-0360


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1015

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST/FLST MODELS1622-0099 Chrome $979.951622-0100 Black 979.95

PART # DESCRIPTION SUG. RETAILFOR 87-99 FXST/FLST MODELS1622-0097 Chrome $979.951622-0098 Black 979.95

FORWARD CONTROL KITS•Features an 11/16” bore master cylinder that is compatible with most stock and aftermarket rear calipers

•Flush mount reservoir lid and 3-D contoured master cylinder with hidden brake line mount•Shifter side control with kickstand mounting holes•Sealed roller bearings at all pivot points for smooth operation and lasting durability•Matching foot and shifter pegs included; in a folding style with rubber inserts•Made in the U.S.A.

NOTE: 07-10 applications will require the use of a 00-06 kickstand assembly.

PART # DESCRIPTION SUG. RETAILFOR 84-99 SOFTAILDS-243196 Forward controls $609.95OPTIONAL/REPLACEMENT COMPONENTSDS-375155 161/8” shifter rod 84.95DS-375156 135/8” shifter rod 83.95DS-253012 Repl. brake/shifter rubbers (6-pc. set) 12.95DS-243823 1/2” shifter spacer 26.95DS-243824 1/2” brake spacer 28.95DS-243828 3/4” shifter spacer 30.95DS-243829 3/4” brake spacer 30.95

FORWARD CONTROLS•Chrome billet aluminum with cutout design•Include a 3/4” bore master cylinder•For offset engines, forward control spacers available separately in 1/2” and 3/4” thicknesses

•Optional matching passenger pegs and shifter rod available; replacement components sold separately

•Made in the U.S.A.

NOTE: Check fender clearance on FL models before operating.FOR 84-99 FXST/C, 86-99 FLST/C/F/N AND 85-86 FX/FXWGPART # DESCRIPTION SUG. RETAILFORWARD CONTROLSDS-243203 W/ toe shifter only $838.95DS-243204 W/ heel and toe shifter 838.95OPTIONAL/REPLACEMENT COMPONENTSDS-375156 13 5/8” shifter rod 83.95DS-253012 Repl. brake/shifter rubbers (6-pc. set) 12.95SPACERSDS-243823 1/2” shifter spacer 26.95DS-243824 1/2” brake spacer 28.95DS-243828 3/4” shifter spacer 30.95DS-243829 3/4” brake spacer 30.95

FORWARD CONTROLS WITH FLOORBOARD MOUNTS•Chrome billet aluminum with a 3/4” master cylinder

•Available with toe shifter only or with heel/toe shifter•Will accept any stock style 86-99 FLST floorboards•Optional passenger footpegs and shifter rod available separately•Spacers available separately for offset motors; sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1622-0019 Chrome, Scimitar $1,037.951622-0065 Black anodized, Scimitar 1,037.95

PART # DESCRIPTION SUG. RETAIL1622-0017 Chrome, Scimitar $1,037.951622-0063 Black anodized, Scimitar 1,037.95

CHROME BILLET FORWARD CONTROLS•Controls feature folding footpeg design, splined adjustable shift shaft for precise shift arm adjustment, sealed roller bearings on all pivot points and 5/8” bore master cylinder

•Mounting plates, master cylinder, brake and shift levers are 6061 T-6 aluminum

•Footpeg mounts, brake and shift lever shafts machined from chromed stainless steel for strength

•Shift linkage rod, master cylinder and all mounting hardware included•Matching passenger footpegs available separately; see page 1040•Made in the U.S.A.

NOTE: Accept master cylinder rebuild kit PART # DS-195042.

NOTE: 3” extended kits will require a custom brake line.

NOTE: 07-10 applications will require the use of 00-06 style kickstand assembly.

FOR 00-10 FXST/FLST FOR 84-99 FXST/FLST, 85-86 FX/FXWG

DS-243196

DS-375155

DS-243824

1622-0100

1622-0097

1622-00191622-0065

LeftLeft

1622-00191622-0065

RightRight

DS-243824

DS-243823

DS-243823

DS-243203


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1016

KICK-BACK ADAPTER PLATES•CNC-machined billet aluminum plates move forward controls backward for shorter riders

•Bolt to the frame where the controls mount from the factory•Sold in pairs•Made in the U.S.A.

NOTE: Dyna needs 11/8”, FXR/FXST models need 13/8” clearance between exhaust and controls, and between primary and controls, for these to work; may also need to shorten shift and brake rods depending on controls configuration.

PART # DESCRIPTION SUG. RETAILDS-243486 For L87-99 FXST (except FLST) $212.95

FORWARD CONTROL RELOCATION KIT•Polished chrome kit relocates the footpegs, brake lever and shifter lever almost 3” further forward to offer a more comfortable riding position

•Comes complete with chrome brake and shifter plates and all the chrome hardware needed to mount the assemblies and kickstand

•Uses original stock footpegs, brake lever, shifter lever and shifter arm•Instructions included PART # DESCRIPTION SUG. RETAIL

1601-0206 For all 07-10 FXST $199.951601-0167 For all 00-06 FXST 199.95

3” FORWARD CONTROL EXTENSION KITS•Moves the OEM controls forward almost 3” for a more comfortable riding position

•Kit includes black anodized billet aluminum adapter plates, extended stainless-steel rear brake line, extended shifter rod, kickstand spring pin and necessary hardware

•Uses stock footpegs, brake lever, shift lever and shift arm•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1622-0079 For 93-02 FXDWG and any Dyna models using

H-D forward controls (OEM #49080-93A) $189.95

EXTENSION KIT•Moves the stock Dyna Wide Glide controls a full 3” further forward

•Kit includes extension plates, countersunk trim plates, linkages and all necessary hardware

•All components are show-chromed•Requires only basic hand tools to install

PART # DESCRIPTION SUG. RETAILDS-243020 Standard extension kit for 00-06 FXST $219.95DS-243021 Deluxe extension kit for 00-05 FXST 329.95

FORWARD CONTROL EXTENSIONS•Moves your stock controls forward 3” for a more comfortable ride

•Standard style includes extension plates with stainless steel shift rod and stainless steel brake line

•Deluxe style includes extension plates, stainless steel brake line and billet aluminum shifter rod


PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST AND FXSTD MODELSDS-243458 2” forward control extension $119.95DS-243459 3” forward control extension 119.95

FORWARD CONTROL EXTENSION KITS•Move the OEM controls forward 2” or 3” for more leg room

•Use stock footpegs, brake lever, shift lever and shift arm•Kits include black powder coated aluminum adapter plates, stainless steel extended shifter rod and mounting bolts

•Use 3” extensions for people 6’ 3” and taller•Made in the U.S.A.

NOTE: Extended rear brake line must be purchased separately; for Drag Specialties brake line kits, see page 839.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FXWG1622-0078 Black-anodized $167.951622-0198 Chrome 167.95

3” FORWARD CONTROL EXTENSION KITS•Extend forward controls with forward-mount master cylinders by 3”

•Extension plates are billet aluminum with a chrome or black-anodized finish

•Include mounting hardware and shifter rod•Made in the U.S.A.

NOTE: Will require the use of a 3” extended rear brake line.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST1622-0241 13/8” back; black $119.951622-0242 13/8” back; chrome 119.95FOR 91-10 DYNA MODELS1622-0239 11/8” back and 1” up; black 119.951622-0240 11/8” back and 1” up; chrome 119.95FOR 84-94 FXR1622-0237 13/8” back; black 119.951622-0238 13/8” back; chrome 119.95

PART # DESCRIPTION SUG. RETAIL1622-0060 For 00-10 Softail $130.95

FORWARD CONTROL ADAPTER PLATE KIT•Backing plate adapter kit allows mounting of 84-99 forward controls onto stock 00-10 Twin Cam Softail frames

•Billet aluminum construction with black anodized finish, includes hardware


PART # DESCRIPTION SUG. RETAILDS-243022 For 84-99 Softail models and most

aftermarket frames $139.95

2” FORWARD CONTROL EXTENSION•Extends forward controls with forward mount master cylinder by 2”

•Black anodized and compact in design


NOTE: May require the use of a custom brake line.

1622-0240

1622-0238

1622-0242

DS-243459

1622-0078

DS-243021

DS-243020

1601-0167


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1017

PART # DESCRIPTION SUG. RETAIL7808-2001 For 00-06 FLST models $129.951622-0005 For 86-99 FLST models 199.95

GO-FORWARD 2” FLOORBOARD EXTENSION KIT•Moves floorboards, shifter and brake forward 2”

•Utilizes stock floorboards, shift lever, shifter arm and brake arm

•Black powder-coated aluminum extension plates, stainless steel extended shift rod and necessary mounting hardware included

•Extended rear brake line must be purchased separately; Drag Specialties brake line kit PART #s 1741-0175 or 1741-0707


NOTE: Will not work with engine guards, except on FLSTF or highway bars; designed for use with stock fenders, brake pedals and shift levers

NOTE: Installation of this kit may cause interference between front fender and floorboards. Check clearance of fender and floorboards with front fork compressed and extended.

PART # DESCRIPTION SUG. RETAILFOR 00-06 FXSTDS-243155 Forward control conversion kit $454.95

CHROME BILLET FORWARD CONTROL CONVERSION KIT•Turns your stock forward controls into billet-style controls

•Uses OEM backing plates and linkage•Kit includes brake pedal, shift lever with peg, inner shifter arm, footpegs and chrome mounting hardware


PART # DESCRIPTION SUG. RETAILFOR 00-10 FLST AND 97-07 FLT/FLHT/FLHR/FLHX/FLTR1610-0368 Deep Cut, chrome $499.951610-0369 Deep Cut, black 499.951610-0370 Retro, chrome 469.95

PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT/FLHR/FLHX/FLTR1610-0365 Deep Cut, chrome $499.951610-0366 Deep Cut, black 499.951610-0367 Retro, chrome 469.95

BRAKE/HEEL/TOE SHIFTER KITS•Complete brake and shifter set•Carved from billet aluminum•Choose from Deep Cut or Retro style

PART # DESCRIPTION SUG. RETAILFOR 02-10 VRSCA/B V-ROD1621-0001 Silver $225.951621-0023 Black 225.95

ROAD-ROD® DRIVER FLOORBOARD BRACKET KITS•Allow for the installation of FLT/FLST style floorboards on a V-Rod without modifications

•Front brackets are made of aluminum with a polished finish•Rear brackets are made from steel with a powder-coated finish•Made in the U.S.A.

NOTE: Floorboards are not included; must be purchased separately. For front boards only. Rear not available.

NOTE: Does not fit Night Rod model VRSCD.

PART # DESCRIPTION SUG. RETAILFOR 86-99 FLSTDS-530613 Left front floorboard mounting stud;

repl. OEM #50989-86 $9.95DS-530614 Left rear floorboard mounting bracket;

repl. OEM #50990-86B 39.95

FORWARD CONTROLS/FLOORBOARD MOUNTING BRACKETS•Chrome finish OEM-style components

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, 08-10 FXCX/C, 03-08 FXDWG, 08-10 FXDF W/ FORWARD CONTROLS AND 04-10 XL883C/1200C1622-0358 13/4” forward control peg mount extender (ea.) $36.951622-0359 13/4” forward control peg mount extender (pr.) 72.95

FORWARD CONTROLS FOOTPEG MOUNT EXTENDERS•Extends the driver’s footpegs out an additional 13/4”

•Mount to the existing clevis on your Küryakyn or other forward controls

•Adds clearance around protruding air cleaners

1622-0005

7808-2001

Shift side Brake side

1621-0001

1621-0023

1622-0359

DS-530613

DS-530614

1610-0368

1610-0369

1610-03701610-0370


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1018

TRAC-BOARDS•Machined from billet aluminum then topped with stainless steel studs pressed into the base

•Satin-grained top surface in either chrome-plated or black anodized•Provide secure no-slip foot placement•Utilize specially engineered rubber mounts to isolate vibration; rear inserts require one hole to be drilled in existing floorboard to allow for third isolator to be fastened; pattern for drilling included

•Front inserts mount directly onto traditional and swept style floorboards; rear inserts mount directly onto traditional style passenger floorboards

•Sold in pairs; matching components also available•Made in the U.S.A. with domestic materials

PART # DESCRIPTION SUG. RETAILRECTANGULAR1621-0102 Driver floorboards for 84-10 FLT, FLHT, FLHR,

FLTR, 86-10 FLST, chrome $499.951621-0103 Passenger floorboards for 86-10 FLT, FLHT, FLHR,

FLTR, chrome 399.95SEMI-CIRCLE1621-0104 Long driver floorboards for 84-10 FLT, FLHT,

FLHR, FLTR, 86-10 FLST, chrome (18” W) 499.951621-0105 Long driver floorboards for 84-10 FLT, FLHT,

FLHR, FLTR, 86-10 FLST, black (18” W) 499.95

PART # DESCRIPTION SUG. RETAILSEMI-CIRCLE (CONT)1621-0162 Short driver floorboards for 84-10 FLT, FLHT,

FLHR, FLTR, 86-10 FLST, chrome (12” L) $499.951621-0163 Short driver floorboards for 84-10 FLT, FLHT,

FLHR, FLTR, 86-10 FLST, black anodized (12” L) 499.951621-0106 Passenger floorboards for 86-10 FLT, FLHT, FLHR,

FLTR, chrome 449.951621-0107 Passenger floorboards for 86-10 FLT, FLHT, FLHR,

FLTR, black 449.95

CHROME BILLET FLOORBOARDS•CNC-machined chrome billet aluminum construction•Driver and passenger floorboards available•Available in rectangular and semi-circle styles•Use OEM hardware•Sold in pairs•Matching rear brake pedal, dash covers and saddlebag latch covers available separately


FOR 86-10 FLT, FLHT, FLHR, FLTR, FLST; TRADITIONAL MOUNTINGPART # DESCRIPTION SUG. RETAILBLACK1621-0212 Stagger style $249.951621-0218 Maltese style 249.951621-0228 Vortex style 249.95CHROME1621-0211 Stagger style 249.951621-0217 Maltese style 249.951621-0227 Vortex style 249.95

FOR 86-10 FLT, FLHT, FLHR, FLTR, FLST; TRADITIONAL MOUNTINGPART # DESCRIPTION SUG. RETAILBLACK1621-0208 Stagger style $299.951621-0214 Maltese style 299.951621-0220 USA style 299.951621-0224 Vortex style 299.95CHROME1621-0207 Stagger style 299.951621-0213 Maltese style 299.951621-0219 USA style 299.951621-0223 Vortex style 299.95

FOR 04-10 FLT, FLHT, FLHR, FLTR; SWEPT MOUNTINGPART # DESCRIPTION SUG. RETAILBLACK1621-0210 Stagger style $299.951621-0216 Maltese style 299.951621-0222 USA style 299.951621-0226 Vortex style 299.95CHROME1621-0209 Stagger style 299.951621-0215 Maltese style 299.951621-0221 USA style 299.951621-0225 Vortex style 299.95

FRONT FRONT (CONT) REAR

1621-0224

1621-0208

1621-0207

1621-0212

1621-0223

1621-02251621-0209

1621-0102

1621-0104

1621-01051621-0162

1621-0163

1621-0106 1621-0107

1621-0103


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1019

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT/FLHT/FLHR/FLTR AND 86-10 FLST1621-0173 Driver floorboards $399.95FOR 93-10 FLT/FLHT/FLHR/FLTR1621-0174 Passenger floorboards 319.95

RETRO FLOORBOARDS•Constructed from chrome-plated billet aluminum•Full-length rubber inserts offer excellent grip and comfort•Styled to match Ness Retro line


RETAILDS-254453 For 84-10 FLT, FLHT, FLHR, FLTR and 86-10 FLST models $499.95

RADIUS TEARDROP BILLET FLOORBOARD KIT•CNC-machined from billet aluminum and then show-chrome-plated

•Kit consists of floorboards, rubber inserts, mounting brackets and hardware

•Radius-style floorboards complement the radius styling of other Ness products


PART # DESCRIPTION SUG. RETAILDS-254441 Passenger floorboards for 93-10 FLT models (except FLHRS/SI) $299.95DS-254420 Repl. rubber kit for two floorboards 26.95

CHROME BILLET PASSENGER FLOORBOARD KIT•Another industry first from Arlen Ness•Made from 3/8” billet aluminum plate that has been machined and fitted with rubber cushion inserts

•All mounting brackets are specially designed to work with the models listed below

•Sold in pairs•Made in the U.S.A.

BANANA BOARDS

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT, FLHT, FLHS, FLHR AND 86-10 FLST MODELS ORIGINALLY EQUIPPED W/ FLOORBOARDSDS-254434 181/2” Banana Boards $311.95DS-254435 133/4” Banana Boards 227.95FOR 94-10 FLT, FLHT, FLHS AND FLHR MODELS ORIGINALLY EQUIPPED W/ REAR FLOORBOARDSDS-254436 Rear board covers 171.95

BANANA BOARDS•Bowed floorboards feature machined billet construction, chrome-plated finish with black rubber inserts and bright finish rivets•Available in two lengths: 181/2” and 133/4”•Optional banana shifter pedal and footpegs are designed to match floorboards; sold separately•Matching highway/passenger peg available separately•Matching rear board covers are also available•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1621-0028 For 02-06 VRSCA/B V-Rod $266.95

SPORT FLOORBOARDS•Polished billet aluminum construction•Rubber inlay and rivets match “Banana Boards” look•Fully adjustable•Fits any stock peg mount•Made in the U.S.A.

1621-0174

DS-254441 DS-254420

DS-254434 DS-254435 DS-254436

1603-0047

1603-0071

PEDALS AND PEGS

PART # DESCRIPTION SUG. RETAIL1603-0047 Banana shifter pedal $76.951603-0071 Male-mount

footpegs 185.95

1621-0173


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1020

PART # DESCRIPTION SUG. RETAIL1621-0088 ISO board driver or passenger kit $199.951621-0144 ISO board passenger kit 208.951620-0671 Splined adapter mounts (pr.) 23.95

ISO® BOARD KIT•Kit includes a pair of ISO® passenger floorboards and a cast bracket to connect the board to a Küryakyn splined adapter mount (sold separately)

•Designed for use on models with passenger pegs•Not recommended for use on passenger peg mounts that attach to the motorcycle with only a single fastener

•PART #1621-0088 recommended for driver or passenger use; check operation of shift lever and brake pedal after installation

•PART #1621-0144 elevates the floorboard approximately 11/4” higher than the stock position; recommended for passenger use only

PART # DESCRIPTION SUG. RETAIL1904-0016 ISO™-Boards for 86-10 FLST

and 84-10 FLT models $299.951904-0017 ISO™ Passenger Boards for 93-10 FLT and 93-10

FLST models w/ H-D accessory floorboard kits 189.95

ISO™-BOARDS AND ISO™-PASSENGER BOARDS•Feature super-comfortable ISO™-Ribs that run the full length of the board

•ISO™-Boards measure 15” overall length and offer several different foot positions for the driver

•ISO™ Passenger Boards were designed specifically to match the ISO™-Boards

•Sold in pairs

ADJUSTABLE FL RIDER LONGBOARDS•Provides better rider comfort by improving foot and leg positioning•Five quick adjustment positions to suit your needs•Increased leg room improves leg and knee comfort•Expanded foot positioning is provided by 13” length, tapering from 4” wide down to 23/8”

•Narrowed design allows for greater lean angles without the risk of touching down•Polished and chromed billet aluminum construction•Includes stylized vibration-reducing rubber inlays and replaceable rub strips and rubber pads

•Easy to install•Matching passenger ShortBoards available for a great custom look; see below•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLST AND 84-10 FLT/FLHT/FLHR/FLTR MODELS1621-0133 Solid $299.951621-0134 Enferno 299.95

PART # DESCRIPTION SUG. RETAILFOR 93-10 FLT/FLHT/FLHR/FLTR MODELS1621-0129 Solid $299.951621-0130 Enferno 299.95

ADJUSTABLE FL PASSENGER SHORTBOARDS•Personalize these adjustable floorboards to suit your needs

•Choose between 42 different settings•Provides up to 61/2” more leg room•Multiple tilt angles provide stress relief in the thighs, calves and ankles

•Polished and chromed construction•Comfort and solid foot support is provided by the 81/2” x 31/2” surface area and vibration-reducing anti-slip rubber pads

•Boards fold up when not in use•Matching Rider LongBoards are available for a great custom look; see above•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1622-0243 For 93-09 FLT/FLHT/FLHR/FLTR models $69.95

PASSENGER FLOORBOARD COMFORT KIT•Utilizes your stock floorboards•Choose from six “comfort” positions of height and tilt•Provides up to 21/2” of additional leg room and widens the floorboards 11/2” to help ease hip stress

•Relieve calf stress by tilting the rear of the floorboards•Relaxes your knees to reduce joint stress•Install and adjust in minutes•Made in the U.S.A.

1621-0088 1621-0144

1904-0016 1904-0017

1621-0133 1621-0134

1621-0129 1621-0130


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1021


RETAILFRONT606-4100 For all 86-10 Softail models w/ OEM front floorboards $199.95606-4100 For all 86-10 Dresser models w/ OEM front floorboards 199.95


RETAILREAR606-4602 For all 00-10 Softail models

(except FLSTS/FXSTD/FLSTF) $299.95606-4604 For all 00-10 Fat Boy models 299.95606-4600 For all 86-10 Dresser models (except FLHRS/SI) 299.95

SWEPT FRONT AND REAR FLOORBOARDS•Timeless form, quality and function•Expansive foot resting area with comfortable rubber inserts

•Front floorboards made of stamped steel then chrome plated and polished to a show-quality finish; use OEM floorboard mounts

•Rear floorboards made of CNC-machined billet aluminum then chrome plated and polished to a show-quality finish; use OEM passenger peg mounts

•Both front and rear floorboard mounts rotate, then you can lock them in the most comfortable riding position•Quick, easy installation – just bolt them on, adjust them and ride

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLT, FLHT, FLHS, FLTR, FLHR AND FLSTDS-254413C Billet aluminum floorboards $303.951621-0097 Billet aluminum passenger floorboard inserts 165.95

BILLET ALUMINUM FLOORBOARDS•Machined from 6061 T-6 billet aluminum, then ball-end milled and triple chrome plated for a custom look

•Bolt directly on top of stock boards•Include all mounting hardware•Available in a chrome finish•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-254411 Floorboards w/ damper for 80-10 FLT, FLHT; 86-10

FLSTC; 90-10 FLSTF, FLSTN; repl. OEM #50621-79A $61.95DS-254402 Repl. rubber pad w/ dampers for driver

floorboards for 91-10 FLT, FLHT and 91-10 FLSTC, FLSTF, FLSTN; repl. OEM #50614-91 (ea.) 25.95

DS-254409 Repl. rubber only for floorboards w/ damper for DS-254411; repl. OEM #50614-66 (pr.) 10.95

FLOORBOARDS•High-quality replicas of OEM floorboards•For stock mounting brackets on several H-D models

PART # DESCRIPTION SUG. RETAILDS-254412 For 84-10 FXST, FXSTC, FXSTS and

85-86 FXWG, plus most bikes w/ clevis-style footpeg mounts $124.95

BOLT-ON ADJUSTABLE FLOORBOARDS•Complete kit; fully adjustable floorboards

•Allow approximately 7” of fore and aft adjustment; also offer foot angle and height adjustability

•All hardware, brackets and floorboards feature heavy-duty construction and chrome plating

•Available in Damper style


RETAILW/ VIBRATION INSERTS1621-0160 Chrome $61.951621-0164 Black 61.95


RETAILW/O VIBRATION INSERTS1621-0161 Chrome $58.951621-0165 Black 58.95

HALF-MOON FLOORBOARDS•Retro styling for modern rides

•Chrome or gloss-black powdercoat finish available

•Available with vibration isolation inserts or plain for a low-profile look

•Install in stock location•Use OEM brackets and hardware•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT/FLHT, 86-10 FLST MODELS1621-0203 Chrome $389.951621-0204 Black anodized 389.95

FLOORBOARDS•CNC-machined billet aluminum construction•Slim, thin design enhances look and adds 1/2” more ground clearance in cornering

•Adjustable mounting options: stock, 1” back, or 1” forward

•Accept stock pads; pads not included•Sold in pairs•Made in the U.S.A.

FOR 84-10 FLT, FLHT; 86-10 FLSTC; 90-10 FLSTF, FLSTN (REPL. OEM #50621-79A)

1621-0203

1621-0204

606-4100606-4600Up

606-4600Down

DS-254413C

1621-0097

DS-254411

1621-0164

1621-0165


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1022


RETAILFOR 84-10 FLT/FLHT, 86-10 FLST1621-0229 Driver floorboard $369.95FOR 86-10 FLT, FLST1621-0230 Passenger floorboard 349.95

CONTOUR FLOORBOARDS•Machined aluminum body with billet hinges•Foot-cushioning rubber pad•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 85-86 FX, FXWGDS-720265 Chrome passenger floorboards $54.95DS-720270 Repl. rubber pads (pr.) 12.95

PASSENGER FLOORBOARDS•Fit on lower frame tube and mount at the frame

•Come complete with rubber pads; mounting hardware not included

•Sold in pairs

NOTE: May require some spacing on custom exhaust applications.

NOTE: Not for kickstart models.

PART # DESCRIPTION SUG. RETAIL1621-00761 For Softail-style frames w/ 1/2” mounting holes $241.951621-0077 For 99-09 FLHT, FLHR, FLTR 286.951 Requires drilling two holes for dowel pins that prevent footrests from

rotating after installation; instructions and template included.

PASSENGER FOOTRESTS•Billet aluminum construction with a show chrome finish•Non-slip rubber pads add comfort on long rides•Fold-up design for added convenience•Style blends smoothly with the lines of your bike•Measure approximately 61/4” L x 31/2” W•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1621-0049 For Dyna Glide, FXRS and VRSCA/B $187.95

PASSENGER CRUISE BOARD KIT•High-quality chrome passenger cruise boards with heavy-duty rubber pads

•Allow 360° rotation for personalized mounting•Mounting hardware included•Measure 4” W x 6” L

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLST, 84-10 FLT/FLHT1621-0200 Chrome $399.951621-0201 Black powder coat 399.95

FLOORBOARDS•CNC-machined from billet aluminum•Feature back cut design with a raised diamond cut center for increased traction


1621-0201

1621-0229

1621-0076

1621-0077

1621-0230

1621-0200


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1023

MINI-FLOORBOARDS•8” L x 31/2” W x 3/8” thick billet aluminum mini-floorboards have rotating male mounts to fit almost any H-D front or rear application

•Chrome finish, rubber cushions and all hardware included


FLOORBOARD EXTENSION KIT•These spacer kits space out your floorboards an extra .8”

•Provides more room away from the pipes on the right and the shifters on the left

•Allows full floorboard use instead of just the outer half; increases comfort and security

•Kit includes stainless steel bolts and powder-coated aluminum spacers•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1621-0170 For 97-10 FLHT, FLHR, FLTR, FLHX $93.95

CHROME DRIVER FLOORBOARD RELOCATION BRACKETS•Repositions the driver floorboards 1” forward and 1” further out than the stock location

•Compatible with Küryakyn ISO® Boards and H-D Traditional or Swept Wing floorboards

•Not for use with Cruise Arm Mk III or standard length Cruiser Arm Mk IV

MINI FLOORBOARDS•Chrome finish with Rail-style raised rubber inserts•1/2” male mount•Sold in pairs


RETAILDS-254442 Mini-floorboards, male mount $216.95DS-254423 Repl. rubber inserts (8) 16.95

PART # DESCRIPTION SUG. RETAILDS-253586 ISO™-Wing mini boards $104.951620-0179 Repl. rubber pads (set of 8) 21.95

ISO™-WING MINI BOARDS•Greater surface area than any other pegs

•Sleek lines and thin profiles permit use in a variety of applications for driver or passenger

•Available with male mounts•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1621-0166 For 09-10 FLHT, FLHR, FLHX and FLTR models $59.951621-0098 For 93-08 FLT, FLHR, FLHX, FLHT and FLTR models 65.95

DRIVER FLOORBOARD SPREADERS•Moves the floorboards outward 11/4”•Provide greater comfort by moving the legs away from the gas tank and engine heat

•Work well with oversized primary covers•Kit is easy to install using included stainless hardware•Billet aluminum with a black finish•Compatible with fairing lowers, but not with centerstand•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILPRK-790 Pork chop foot pads $199.95

PORK CHOP FOOT PADS•Unique pads look and work great•6061 T-6 billet aluminum construction with faceted edges and rubber pads

•Use as peg replacements or as footrest when used with highway pegs•Design allows the pads to be angled to rider’s preference•Measure 7” L x 41/2” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1621-0101 Mini floorboards $56.95

MINI FLOORBOARDS•Die-cast construction with chrome-plating and non-slip rubber matting

•Replace male clevis mount footpegs; supplementary mounting holes allow floorboards to rotate 15° for the perfect riding position

•Measure 4” x 8”•Sold in pairs

1621-0167

1621-0168

1621-0098

PART # DESCRIPTION SUG. RETAIL1621-0198 Black powder coat $329.951621-0199 Chrome 329.95

MINI FLOORBOARDS•CNC-machined from billet aluminum•Fits most forward controls and universal mounting•Rigid mounting with 3/8”-16 mounting bolt•Allows more foot movement compared to conventional footpegs•Back cut design with diamond cut raised center for increased traction•Measure 7” L x 21/2” W•May be used as passenger foot boards if custom mounted•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

FOR ALL HD MODELS WITH FOOTPEGS1621-0056 Driver floorboards $199.951621-0055 Universal/passenger floorboards 199.95

MINI BULLET FLOORBOARDS•Precision cast, premium alloy floorboards add a chrome-plated custom look to your bike

•Replace stock pegs for both passenger and rider•Standard male clevis mount

1621-0199

1621-00551621-0056

1621-0198

DS-254442

DS-253586

PART # DESCRIPTION SUG. RETAIL1621-0167 For 09-10 FLHT/FLHR/FLTR/FLHX $42.951621-0071 For 97-08 FLT/FLHT/FLHR/FLTR/FLHX 39.951621-0169 For 83-92 FLHT/FLHR 39.951621-0168 For 92-09 FLT/FLHT/FLHR/FLTR (rear passenger) 29.95

PART # DESCRIPTION SUG. RETAIL1620-0388 Mini floorboards $137.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1024

PART # DESCRIPTION SUG. RETAIL1904-1704 For 93-09 Dresser models; repl. OEM #52719-93 $99.95

PASSENGER FLOORBOARD MOUNTS•Chrome-plated machined steel•Replace the existing black mounts•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1621-0069 For 93-09 FLT, FLHT, FLHR, FLHX and FLTR models $61.95

PASSENGER FLOORBOARD EXTENDERS•Extenders move the passenger floor boards out 1”•Work great on stock motorcycles to give the passenger increased comfort; necessary when using oversized primary covers such as the Barnett billet aluminum cover

•These extenders are made of highly polished billet aluminum and include instructions


PART # DESCRIPTION SUG. RETAILDS-530620 For 84-08 FLT, FLHT (4-pc.) $176.95

DRIVER FLOORBOARD MOUNTING BRACKETS•Chrome reproductions of the OEM mounting brackets

•Utilize OEM mounting hardware

•Floorboards are not included; must be purchased separately

PART # DESCRIPTION SUG. RETAIL1621-0108 For 93-09 Dresser and Road King models $125.95

PASSENGER BOARD MOUNTS•Replaces the stock black mounts•Beautiful chrome-plated finish•Accept stock or most aftermarket passenger floorboards•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-243659 For 93-09 FLT $76.95

PASSENGER FOOTPEG MOUNTING KIT•Chrome-plated billet steel mounting kit allows for the mounting of passenger footpegs in place of the OEM floorboards

•Accepts any male mount footpegs•Footpegs sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-10 FLT, FLHT (EXCEPT FLHRS, FLHX); 86-10 FLST (EXCEPT 05-10 FLSTN, 08-10 FLSTB, 09-10 FLSTC)1621-0078 For streamliner floorboards $74.951621-0079 For stock floorboards 74.95

UNDERCOVERS•Black, ABS plastic insert smoothes out and covers the underside of your stock or streamliner floorboards

•Add paint or leave them black•Easy installation – snap into place, held securely with 3M tape•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1904-3002 For 80-10 FLT, FLHT (except FLHTRS, FLHX),

86-10 FLST (except 05-10 FLSTN, 08-10 FLSTSB, 09 FLSTC) and 90-10 FLSTF $42.95

FLOORBOARD “MINI-SKIRTS”•Give the stock floorboards a custom look

•Highly polished chrome-plated steel skirts cover the lower section of the floorboard

•Easy to install; mount between the rubber isolators and the upper floorboard and include instructions

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1621-0123 For 87-10 FLT and 86-10 FLST w/ OEM D-shaped

passenger floorboards; repl. OEM #50782-91 $49.95

PASSENGER FLOORBOARD COVERS•Chrome-plated steel covers•Install using supplied chrome self-tapping screws

•Smooth, clean styling•Sold in pairs

Left Right

1621-0078

1621-0079

PART # DESCRIPTION SUG. RETAILFOR 09-10 FLT MODELS1621-0176 Black $169.951621-0175 Chrome 189.95FOR 84-08 FLT MODELS1621-0099 Black $149.951621-0100 Chrome 169.95

DRIVER FLOORBOARD EXTENSION KITS•Moves factory floorboards forward 2”•Provides extra leg room and comfort for taller riders

•Relocation brackets and all mounting hardware included

1621-0099

1621-0175


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1025

ADJUSTABLE CHROME MUSTACHE BAR•A classic design gets a modern update•Clamp system allows the bar to slide up or down on frame downtubes, and peg mounts can rotate fore or aft for the ultimate in adjustment and rider comfort

•Accept any male-mount style H-D pegs

PART # DESCRIPTION SUG. RETAILDS-254444 For most rectangular floorboards

from 84-10 (except 05-10 FLSTN, 08-10 FLSTSB, 09-10 FLSTC, FLHRS, FLHX) $270.95

FLOORBOARD SKINS•CNC-machined from 6061 T-6 billet aluminum•Chrome finish•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDRIVER FLOORBOARD COVERS FOR 84-10 FLT, FLHT (EXCEPT 04-05 FLHTCSE, 06-10 FLHTCUSE), 98-10 FLTR (EXCEPT 09-10 FLTRSE), 94-10 FLHR (EXCEPT 04-07 FLHRS, 07-08 FLHRSE) AND ALL 86-10 FLST (EXCEPT 05-10 FLSTN, 05-06 FLSTFSE, 08-10 FLSTSB, 09-10 FLSTC)1620-0683 Flame $199.951621-0121 Zombie 199.95PASSENGER FLOORBOARD COVERS FOR 86-10 FLHT, FLHR, FLTR, FLHX, 86-10 FXST/FLST W/ H-D ACCESSORY FLOORBOARD KITS AND TRADITIONAL-SHAPE FLOORBOARDS1621-0206 Flame 89.951621-0122 Zombie 89.95

DRIVER AND PASSENGER FLOORBOARD COVERS•Sit on top of the stock steel base plate to provide maximum comfort

•Raised rubber edges keep your boots off the exhaust pipes

•Direct replacement for OEM floorboard covers•Choice of chrome flame inserts or Zombie chrome inlay designs•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 86-10 DRESSERS (EXCEPT FLHRS, FLHX)1621-0057 Combination heel and interior guard set $75.951621-0059 Interior edge guard set only 65.95FOR 86-10 SOFTAIL MODELS (EXCEPT 05-10 FLSTN, 08-10 FLSTB, 09-10 FLSTC)1621-0058 Combination heel and interior guard set 75.951621-0060 Interior edge guard set only 65.95

PASSENGER FLOORBOARD GUARDS•Prevent boot heels from touching the hot exhaust pipe•Highly-polished stainless-steel guards will also dress up your stock floorboards

PART # DESCRIPTION SUG. RETAILDS-253006 For 84-91 FL, FLT and FLST;

repl. OEM #50620-74 $5.95

FLOORBOARD ISOLATION DAMPERS•Sold in 8-pack

1621-0057

1621-0059

1621-0058

1621-0060

DRIVER FLOORBOARD GUARDS•Prevent your boot heels from melting on the hot exhaust pipe

•Highly-polished stainless-steel guards will also dress up your stock floorboards

•Allow you to keep your eyes safely on the road ahead instead of looking down to see if your heel is too close to the exhaust pipe

•Full-right/modified left set comes with a left-side guard height that has been modified by 1/4” to not impede heel shifter


RETAILFOR 84-10 HD MODELS WITH FLOORBOARDS (EXCEPT FLHRS, FLHX, 05-10 FLSTN, 08-10 FLSTSB, 09-10 FLSTC)1621-0053 Full-size right guard/full-size left guard set $96.951621-0054 Full-size right guard/modified-size left guard set 96.951621-0052 Single right-side only guard 53.95

1621-0053

1621-0053

1621-0054

1621-00521621-0052

1620-0683

PART # DESCRIPTION SUG. RETAIL1624-0182 For 00-10 FLST, FXST, FXCW/C $169.951624-0183 For 91-10 FXD, FXDWG 169.95

1624-0183

1621-0054

1621-0121

1621-0122


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1026

PART # DESCRIPTION SUG. RETAIL1620-0377 Chrome-plated footpegs (pr.) $59.951603-0053 Chrome-plated shift peg (ea.) 24.95

FOOT AND SHIFT PEGS•Features polished and chrome-plated die-cast construction

•Knurled nylon insets for style and durability for all-day riding

•Matching grips PART #0630-0372 available separately; see page 728•This unique foot and shift peg styles are only available from Drag Specialties

PART # DESCRIPTION SUG. RETAIL1620-0674 Chrome $119.951620-0675 Black 109.95

“BIG BUFFALO” FOOTPEGS•Machined from billet aluminum•Vibration-absorbing rubber inserts for comfort on long rides

•Chrome or gloss black finish available•Male-mount design•A perfect match to our Big Buffalo grips


PART # DESCRIPTION SUG. RETAIL1620-0466 Skull footpegs $89.95

SKULL FOOTPEGS•Billet construction with a chrome-plated finish

•Rubber skull inserts•Male-mount design•Sold in pairs

1620-0674

PART # DESCRIPTION SUG. RETAILDS-253696 “Rail” pegs w/ male mount $53.95DS-253698 “Rail” shifter peg (ea.) 16.95DS-253700 Small dia. (11/4”) “Rail” footpegs (pr.) w/ 1/2 male mount 38.95

“RAIL” FOOT AND SHIFTER PEGS•Another unique design from Drag and Arlen Ness•Protective rubber rails run completely around diameter for great looks no matter how pegs rotate or pivot

•Each is precisely die-cast, chrome-plated aluminum•End cap is super-clean and uses a grade 8 countersunk flat-head socket screw

•Very tight tolerances ensure a great-quality, superstrong footpeg assembly

•Carbon-steel pivot ends are stronger than other die-cast pivots•Peg diameter is 1.5” (between a standard large-size driver and the smaller passenger-style pegs); length is 4” without pivot end

•Shifter peg matches footpegs•Sold in pairs with pivot ends installed

DS-253696

DS-253698 DS-253696

PART # APPLICATION BAR LENGTH STYLESUG.

RETAILDS-243524 For 91-10 Dyna Glide 33/8” Female mount $59.95DS-243625 For L86-03 XL 61/4” Female mount 39.95

MOTOR MOUNT HIGHWAY BARS•Drag’s assortment of chrome-plated highway bars are engineered for comfortable highway cruising and good looks

•Come complete with 1/4” steel mounting plates (where required); refer to footpeg pages for styles

NOTE: Footpegs are sold separately to ease dealer inventory and let buyer customize his purchase.

NOTE: The kit for 86-03 XL comes without mounting plates. Use PART #DS-243516.

PART # DESCRIPTION SUG. RETAIL1624-0185 L84-03 XL $155.951624-0184 04-10 XL 155.95

ADJUSTABLE CHROME CRUISE PEGS•Bolt to the welded crossbrace near the bottom of the downtubes

•Fully adjustable•Can be used with or without forward controls•Accept any male mount style H-D footpegs•1” diameter bar

1624-0184

DS-243524

DS-243625

ADJUSTABLE HIGHWAY PEG MOUNT•Features black-finished mounting brackets and chrome footpeg arms and clevices

•Footpeg mount arms are adjustable and can be mounted in three pre-set positions to match the rider height and preferred riding position

•Footpegs not included; accepts most male mount pegs•Includes all required mounting hardware; visible hardware is chrome-plated


RETAIL1624-0124 For 04-10 XL $159.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1027

PART # DESCRIPTION SUG. RETAILDS-253330 5/8” female mount footpegs $30.95DS-253340 Small male mount footpegs 30.95DS-253342 5” male mount footpegs 39.95

PART # DESCRIPTION SUG. RETAILDS-253410 Large male mount footpegs $39.95DS-253400 Large female mount footpegs 37.95DS-241010 Shifter peg 8.95

SUNDANCE® FOOTPEGS•Highly chromed custom footpegs have neoprene O-rings and are used for many applications

•Matching shift peg also available,sold separately

PART # DESCRIPTION SUG. RETAILDS-241015 3/4” O-rings for kick pedals and shift pegs (12-pk.) $2.95DS-253017 7/8” O-rings for highway and passenger pegs (10-pk.) 3.95DS-253019 1” O-rings for large driver pegs and flat kick pedal (10-pk.) 5.95

NEOPRENE O-RINGS FOR SUNDANCE® PEGS•Replacements for original Sundance neoprene O-rings


RETAILDS-241065 Rubber driver pegs; repl.

OEM #50939-52 (pr.) $19.95DS-241060 Repl. rubber footrest cover for 85 FX

(not FXWG, FXST, FXR); 86-90 XL; repl. OEM #50940-52 (ea.) 5.95

DS-241050 Rubber shifter peg; repl. OEM #34611-65 (ea.) 3.95

DS-241061 Repl. driver footrest cover for 84-94 FXR; repl. OEM #50646-82 (ea.) 6.95

RUBBER REPLACEMENT DRIVER FOOTPEGS AND SHIFTER PEG•Rubber driver pegs with zinc-plated steel inserts

PART # DESCRIPTION SUG. RETAILDESIGNER FOOTPEGSDS-253546 Rail $53.95DS-253547 Flamed 53.95

PART # DESCRIPTION SUG. RETAILFOOTPEG MOUNTSDS-253541 Male mount $24.95DS-253543 Small female

mount 27.95

CHROME ADJUSTABLE DESIGNER FOOTPEGS•Choose from two styles of heavy steel footpegs•Durable rubber pad inserts in several designs•Footpegs feature 180° internal splines allowing pegs to be mounted at many different angles

•Footpeg mounts have four engagement locking teeth to hold pegs in place•Footpegs and mounts are sold separately (in pairs)

NOTE: Use of a thread-locking product is recommended on all mounting bolts.

DS-241010

DS-253342

DS-253340DS-253400

DS-253330 DS-253410


RETAILDS-253500 Soft-ride large dia. peg w/ male mount (pr.) $39.95DS-253501 Soft-ride large dia. footpeg

w/ large female mount (pr.) 39.95DS-253506 Soft-ride small dia. peg w/ 5/8” female mount (pr.) 35.95DS-253505 Soft-ride small dia. peg w/ male mount (pr.) 35.95DS-253510 Soft-ride shifter peg (ea.) 11.95


RETAILDS-253743 Extended Soft-ride 31/4” shifter peg (ea.) $11.95DS-253503 Soft-ride male mounts (pr.) 9.95DS-253507 Soft-ride small 5/8” female mount (pr.) 9.95DS-253515 Soft-ride repl. rubber, large peg (8-pk.) 7.95DS-253516 Soft-ride repl. rubber, small peg (8-pk.) 7.95DS-253517 Soft-ride repl. shifter peg rubber (set) 2.95

SOFT-RIDE FOOTPEGS AND SHIFTER PEGS•Designed to absorb vibrations•Hollow core, long-lasting neoprene rubber insert cleats are isolastically mounted on a special chrome socket-head bolt

•Shifter peg and all replacement components are also available

DS-253541

DS-253543

DS-253546

DS-253547DS-241065

DS-241050

DS-241061

DS-253017

DS-253500

DS-253503 DS-253507

DS-253501

DS-253506 DS-253505

DS-253510 DS-253743

DS-253515 DS-253517


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1028

PART # DESCRIPTION SUG. RETAILDS-253404 4” rubber footpegs

w/ large female mounts $37.95DS-253405 Rubber footpegs

w/ small female mounts 26.95

PART # DESCRIPTION SUG. RETAILDS-253406 Rubber footpegs

w/ male mounts $26.95DS-253407 Rubber shift peg (ea.) 8.95

CHROME FOOTPEGS WITH RUBBER SLEEVES•Die-cast construction, rubber sleeves and highly polished chrome ends

•Feature the styling of our Sundance® pegs, but with molded rubber sleeves rather than O-ring grooves

•Sold in pairs unless noted


RETAILDS-253300 Sundance

clamp-mount footpegs $27.95

CLAMP MOUNT FOOTPEGS•Includes chromed 1” and 11/4” steel clamps; designed for clamping pegs to frames or safety bars

PART # DESCRIPTION SUG. RETAILDS-253800 Flat footpegs $54.95DS-253019 Repl. O-rings, 1” x 3/32” (10-pk.) 1.95

“POPSICLE” FOOTPEGS WITH O-RINGS•Die-cast, diamond-shaped and highlighted by a black paint outline

•Mount to any 1” dia. engine guard or frame and comes complete with a three-piece tube clamp for easy mounting

•Unique design won’t pinch the ankle like a round peg can

•Sold in pairs; O-rings includedPART # DESCRIPTION SUG. RETAIL1904-6453 Straight male mount $29.951904-6454 45° male mount 29.951904-6452 Bolt-on (5/16” mount bolts) 19.951904-1764 U-clamp (fits 1”-11/4” tube) 19.95

FOOTPEGS WITH RUBBER INLAY•Fold-up design with a chrome finish

•Available in male-mount, bolt-on and U-clamp style

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 86-09 FLST (EXCEPT 05-09 FLSTN AND 05 FLSTFSE) AND 84-09 FLHT/FLHR MODELS W/O FAIRING LOWERS (EXCEPT 04-05 FLHTCSEI AND 04-06 FLHRS)1620-0181 Cruise Arm Mark III $189.951620-0182 Cruise Arm Mark III w/ small ISO™-Pegs 219.95

CRUISE ARM MARK III•One of Küryakyn’s most popular accessories•Offers a wide range of adjustment for comfort on the road

•Adjustment range is limited when engine guards are installed•Entire assembly mounts to the floorboard; reinforcing plate adds stiffness to the floorboards to keep flex to a minimum

•Installation requires drilling mounting holes in the steel floorboard base for the adjustable mount and floorboard reinforcing plate – stock rubber floorboard pads are not affected

•Sold in pairs


RETAILDS-253408 Standard $22.95DS-253403 Extended length 27.95

RUBBER VIBRATION-ABSORBING PASSENGER FOOTPEGS•OEM-style passenger footpegs available in standard or extended (5”) length

•All have small male mounts and are finished with chrome end caps

•Sold in pairs


RETAILDS-253320 Sundance stud mount footpegs $27.95

STUD MOUNT FOOTPEGS•A chromed 3/4” square steel block with 3/8”-24 thread is included for custom frame tab mounting

•Also screw onto the lower shock mounts of pre-72 Harley models

1904-6453

DS-253800

1620-0181

1620-0181

DS-253404

DS-253407

DS-253405

DS-253406

DS-253403

DS-253408

1904-6454

1904-64521904-1764


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1029

PART # DESCRIPTION SUG. RETAIL1620-0180 Stiletto pegs, male mount (pr.) $104.951603-0010 Shift peg (ea.) 29.951610-0020 Brake pedal pad for FXST, FXDWG and

Küryakyn forward controls 32.95

STILETTO PEGS•For those who ride on the wild side•Install on any model using male-mount pegs

PART # DESCRIPTION SUG. RETAIL1620-0424 Stiletto stirrups w/ pegs (pr.) $177.95

STILETTO STIRRUPS•Combines the flair of our Stiletto pegs with a comfortable stirrup heel rest

•Built-in heel guard keeps boot heels from scuffing the bike

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0437 Switchblade pegs (pr.) $136.95

SWITCHBLADE™ FOOTPEGS•Comfortable, versatile and sleek•Large-surface-area, rubber-isolated footpeg•Concealed heelrest can be deployed to add the comfort of Küryakyn ISO™-Stirrups

•Best for use on bikes with forward controls or forward-mounted footpegs; will work in any peg location

•Heel rests have curb feeler tabs to protect the pegs when cornering•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0369 ISO®-SweptWing pegs w/ male-mount ends (pr.) $89.95

ISO®-SWEPTWING PEGS•Simple, stylish design adds a sleek, streamlined look to your bike

•Feature the traditional ISO® design to reduce vibration and provide long-distance comfort

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253582 Pilot pegs (pr.) $73.95DS-253584 Pilot pegs w/ stirrups (pr.) 136.95DS-253583 Pilot shift peg (ea.) 20.95DS-253585 Pilot brake pedal pad for FXST,

FXDWG or Küryakyn forward controls 32.95

PILOT™ PEGS•Flowing teardrop male mount pegs add a unique custom look to any bike

•Available with and without stirrups

•Stirrup style has a guard to prevent your heel from melting on the front exhaust pipe

PART # DESCRIPTION SUG. RETAIL1620-0367 Kaiser pegs w/ male-mount ends $104.95

KAISER™ PEGS•The ultimate chopper footpeg•Maltese Cross insert with spire pointed end for that old-school custom look

•Rubber pad inserts add comfort and isolate the foot from vibration

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1611-0015 Widow pegs w/ male-mount ends (pr.) $104.951611-0016 Widow pegs w/o male-mount ends (pr.) 94.951620-0668 Widow Stirrups w/o pegs, male-mount (pr.) 104.951603-0073 Widow shift peg (ea.) 26.95

WIDOW PEGS•Full custom footpeg design•Ominous black widow design nestled in the rubber pads

PART # DESCRIPTION SUG. RETAIL1622-0147 Highway pegs for forward control models $167.95

HIGHWAY PEGS FOR FORWARD CONTROL MODELS•Arms are adjustable so you can fine-tune the footpeg location

•Chrome-plated finish•Accept any H-D male-mount style footpegs in the highway peg position

•Compatible with stock forward controls

•Recommended for use by riders with inseam of 34” or longer

•Require the use of Küryakyn footpegs

1603-0010

1620-0180

1610-0020

1620-0180

1603-0010

1610-0020

DS-253582

DS-253583DS-253585

DS-253584

Shown with heelrest deployedShown with heelrest deployed Shown with

heelrest closedShown with heelrest closed

1611-0015 1611-0016

1620-0668 1603-0073


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1030

PART # DESCRIPTION SUG. RETAIL1620-0365 Footpegs w/ male-mount ends (pr.) $104.951603-0101 Shift peg w/ mounting hardware (ea.) 25.95

FLAMIN’ PEGS•Flame design adds timeless style•Chrome bodies with rubber flame inserts provide comfort and help isolate the foot from vibrations

PART # DESCRIPTION SUG. RETAIL1620-0277 Footpegs w/ male-mount ends (pr.) $104.951603-0100 Shift peg (ea.) 25.95

ZOMBIE™ PEGS•Feature a sinister chrome spire point and a skull nestled between the rubber pads

•Chrome bodies with rubber pads•Sturdy, rugged pegs design•Footpegs include male-mount ends•Shift peg includes mounting hardware

PART # DESCRIPTION SUG. RETAIL1611-0014 SwingWing pegs (pr.) $167.95

SWINGWING PEGS•A convenient alternative to forward controls

•Our clever cruise peg features a fold-forward design

•Secondary fold-out peg extends 3” forward and locks into place for added legroom and comfort

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253578 Retro pegs w/ male mount (pr.) $73.95DS-253581 Retro pegs w/ ISO™-stirrup (pr.) 104.95DS-253579 Retro brake pedal pad for FXST, FXDWG or Küryakyn forward controls (ea.) 32.95DS-253580 Retro shift peg (ea.) 20.951620-0422 Repl. pads for Retro pegs (4-pc.) 15.951603-0072 Repl. pads for Retro shift peg (2-pc.) 8.951611-0022 Repl. pads for Retro brake pedal pad (2-pc.) 11.95

RETRO™ PEGS•Combine the classic comfort of ISO™-Pegs with updated styling

•The body of the peg has a thin profile that looks great on any machine

•Most of the interchangeable mounts for the ISO™-Pegs will work for the Retro™ Pegs

PART # DESCRIPTION SUG. RETAILSMALL ISO™-PEGSDS-241101 Male mount (pr.) $47.95DS-241102 5/8” female mount (pr.) 47.95LARGE ISO™-PEGSDS-241103 Male mount (pr.) 48.95DS-241104 3/4” female mount (pr.) 47.95LONGHORN ISO™-PEGSDS-241107 Male mount (pr.) 52.95DUALLY ISO™-PEGSDS-253595 Male mount 73.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGSDS-241105 Std. shift peg (25/8” L) $17.95DS-241106 Longhorn shift peg (31/4”) 18.95REPLACEMENT COMPONENTSDS-241114 Small peg rubbers (8-pk.) 12.95DS-241115 Large peg rubbers (8-pk.) 13.95DS-241116 Shift peg rubbers (4-pk.) 7.951621-0027 Male peg mount (pr.) 19.951620-0426 Female mounts for “bullet” mounts (pr.) 11.951620-0427 Female mounts for 5/8” square mount (pr.) 11.95

ISO™-PEGS AND SHIFT PEGS•Give you a custom look and dampen vibration•Interchangeable ends allow use on early- or late-style footpeg mounts•Hollow-core neoprene inserts are long lasting•Small peg measures 11/4” in diameter x 45/8” long•Large peg measures 11/2” in diameter x 47/8” long•Longhorn peg measures 11/4” in diameter x 53/4” long•Dually peg measures 21/2” wide x 5” long•Matching pegs, brake pedal pads and stirrups are available separately

NOTE: ISO™-Pegs components are not compatible with other footpegs such as the Soft-Ride style.

DS-241101

DS-241102

DS-241103

DS-241104

DS-253595

DS-241105

DS-241106

1621-0027

1620-04261620-0427

1620-0365 1603-0101

1620-0277 1603-0100

Secondary pegextended

DS-253578

DS-253579

DS-253581

DS-253580


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1031

ADJUSTABLE PASSENGER PEGS FOR FLT•Bolt action locking device on the swingarm adds two intermediate positions

•Revised mounting system allows easier installation and better fit on newer models

•Do not interfere with floorboard operation

•93-06 FLT models equipped with Rinehart True Dual Exhaust require PART #1621-0075 (sold separately), extended left-side passenger board mount

PART # DESCRIPTION SUG. RETAILDS-241108 W/o peg, male mount (pr.) $99.951620-0128 W/ Dually pegs, male mount (pr.) 139.95DS-241109 W/ large peg, male mount (pr.) 129.95DS-241110 W/ small peg, male mount (pr.) 129.95DS-241114 Repl. small peg rubbers (8-pk.) 12.95

PART # DESCRIPTION SUG. RETAILDS-241115 Repl. large peg rubbers (8-pk.) $13.95DS-241121 Repl. stirrup pads (pr.) 11.95DS-241123 Repl. stirrup arm and pad (ea.) 26.95DS-241124 Repl. stirrup end, male mount (ea.) 23.95

ISO™-STIRRUPS•Add a heel rest to the popular ISO™-Peg system•Give you floorboard comfort without the bulk•Available with two styles of footpegs, or without footpegs to upgrade your existing ISO™-Peg system•Replacement components also available

PART # DESCRIPTION SUG. RETAIL1620-0188 For use with H-D Aileron (OEM #s 50305-02, 50916-90T or 50915-90T) or

Airfoil (OEM #s 50134-95, 50133-95, 50474-03, 43280-01, 50131-95 or 50130-95) accessory footpegs $104.95

1620-0189 For use with H-D Flame, Diamond or Skull accessory footpegs (OEM #s 50312-03, 50506-04 or 50370-04) 104.95

ISO™-STIRRUPS •Now you can add the comfort of ISO™-Stirrups to your H-D or other style custom footpegs•Simply remove the standard mount and replace it with this stirrup assembly•For use with male-mount style footpegs•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253587 Adjustable passenger pegs for 93-06 FLT $198.951621-0075 Extended left side passenger board mount 73.951620-0681 For 04-06 FLHTCSE, FLHTCUSE and any other Touring model equipped w/ H-D chrome passenger floorboard kit

OEM #s 52714-04, 50378-07 199.951620-0682 For 07-10 FLHT/FLHR/FLTR/FLHX equipped w/ stock passenger boards (except 07-09 FLHTCUSE) 199.95

PART # DESCRIPTION SUG. RETAIL1620-0001 For 86-07 FXST, FLST models

(except FXSTD, FLSTF FLSTN and FLSTS w/ OEM exhaust or cross-over exhaust systems) $198.95

ADJUSTABLE PASSENGER PEGS•Provide five locking positions for alternative footrest placement

•Easy one-bolt installation•Include small ISO™-Pegs on retractable arms•Footpegs for female mounts must be purchased separately

•Sold in pairs

DS-241108 1620-0128

1620-0188

DS-253587

DS-241124

DS-241123

1620-0682


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1032

UNDERSEAT PEGS•Give passengers the chopper-style riding position right out of the 60s

•Work great for smaller passengers

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 86-05 FXST, 86-07 FLST (EXCEPT FXSTD, FLSTFSE AND 07 FLSTF)1620-0185 Mounts w/ small ISO™-Pegs $124.951620-0186 Mounts w/o pegs 94.95

LONGHORN OFFSET DUALLY HIGHWAY PEGS•Combine our most popular highway peg components into one easy-to-install product

•Provide long-haul comfort•Available with 1” or 11/4” quick clamps, install on engine guards

•Fully adjustable

PART # DESCRIPTION SUG. RETAIL1624-0035 Longhorn offset dually ISO™-Pegs

w/ 11/4” clamp (pr.) $156.951624-0036 Longhorn offset dually ISO™-Pegs

w/ 1” clamp (pr.) 156.95

TOUR-TECH™ CRUISE MOUNTS•These pegs offer an incredible amount of adjustability•Entire assembly can be moved up or down on the engine guard•Arm of the footpeg can be further adjusted along a vertical or horizontal arc•Unique clevis permits angle adjustment of the footpeg•Recommended for use on Touring models, FLSTC model or any bike that has 11/4” dia. engine guards•Work great with fairing lowers•All feature the 11/4” Magnum Quick Clamp for quick, easy installation•Sold in pairs

PART # DESCRIPTION SUG. RETAILOFFSET MOUNTS WITH QUICK CLAMPS1620-0129 Small ISO™-Pegs $124.951620-0130 Large ISO™-Pegs 136.951620-0131 Dually ISO™-Pegs 146.95CLEVIS MOUNT WITH QUICK CLAMPS1620-0132 Small ISO™-Pegs 99.951620-0133 Large ISO™-Pegs 104.95

PART # DESCRIPTION SUG. RETAILCLEVIS MOUNT WITH QUICK CLAMPS (CONT)1620-0134 Dually ISO™-Pegs $136.951620-0135 ISO™-Wings 146.95ISO-STIRRUPS WITH MAGNUM QUICK CLAMPS1620-0136 Small ISO™-Pegs with ISO™ Stirrups 167.951620-0137 Large ISO™-Pegs with ISO™ Stirrups 167.95

FOOTPEG ADAPTERS FOR BIG DOG•For use with most Küryakyn footpegs•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0433 For 04-07 Big Dog $32.95

1620-01291620-0133

1620-0134

1620-0132 1620-0135

1620-0130

1620-0131

1620-0185

1624-0035

1620-0137

1620-0136

1620-0186

1624-0036


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1033

PART # DESCRIPTION SUG. RETAILFEMALE-MOUNT PEGS1620-0400 1.25” full rubber;

chrome $139.951620-0402 1.25” full rubber; black 139.95MALE-MOUNT PEGS1620-0727 1” Factor, polished 129.951620-0728 1” Factor, chrome 139.951620-0729 1” Factor, black 139.951620-0730 1.25” Factor, polished 129.951620-0731 1.25” Factor, chrome 139.951620-0732 1.25” Factor, black 139.95DS-243512 1” wide band; chrome 139.951620-0395 1” wide band; black 139.95DS-243572 1” full rubber; chrome 139.951620-0399 1” full rubber; black 139.95DS-243571 1” dovetail; chrome 153.951620-0397 1” dovetail; black 153.95

PART # DESCRIPTION SUG. RETAILMALE-MOUNT PEGS (CONT)DS-253020 1.25” wide band;

chrome $139.951620-0396 1.25” wide band; black 139.95DS-253022 1.25” dovetail; chrome 153.951620-0398 1.25” dovetail; black 153.953/8”-16 THREADED SPRING-LOADED FOLDING MALE-MOUNT PEGSDS-253026 1” wide band; chrome 149.951620-0391 1” wide band; black 149.951/2”-20 THREADED SPRING-LOADED FOLDING MALE-MOUNT PEGSDS-253065 1” wide band; chrome 149.951620-0392 1” wide band; black 149.95DS-253067 1” full rubber; chrome 149.951620-0394 1” full rubber; black 149.95DS-253068 1”dovetail; chrome 149.95

PART # DESCRIPTION SUG. RETAIL1/2”-20 THREADED SPRING-LOADED FOLDING MALE-MOUNT PEGS (CONT)1620-0393 1”dovetail; black $149.95SHIFTER PEGSDS-253032 Wide band; chrome 48.951603-0058 Wide band; black 41.95DS-253033 Full rubber; chrome 48.951603-0060 Full rubber; black 41.95DS-253034 Dovetail; chrome 53.951603-0059 Dovetail; black 41.951603-0106 Factor; polished 44.951603-0107 Factor; chrome 48.951603-0108 Factor; black 48.951603-0109 Trac; chrome 69.951603-0110 Trac; black 69.95

FOOTPEGS AND SHIFTER PEGS•Available in trac, factor, wide band, full rubber or dovetail styles

•Footpegs sold in pairs; shifter pegs are sold each•Available with polished, chrome or black-anodized finish•Made in the U.S.A. with domestic materials

DESCRIPTION WIDE BAND SUG. RETAIL FULL RUBBER SUG. RETAIL DOVETAIL SUG. RETAIL1” pegs DS-243518 $18.95 DS-253057 $15.95 1603-0056 $31.9511/4” pegs DS-243514 18.95 1603-0057 21.95 DS-253061 24.95Shifter pegs DS-243517 8.95 DS-253059 7.95 DS-253062 11.95

REPLACEMENT RUBBER COMPONENTS FOR JAYBRAKE FOOTPEGS/SHIFTER PEGS•Replacement peg rubbers are sold for two pegs; replacement shifter rubbers are for one peg

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0733 Chrome $199.951620-0734 Black 199.95

PART # DESCRIPTION SUG. RETAILMALE FOOTPEG MOUNTS (PR.)1620-0735 Stainless $69.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1603-0109 Chrome $69.951603-0110 Black 69.95

TRAC SERIES PASSENGER FOOTPEGS AND SHIFT PEGS•Machined from billet aluminum then topped with stainless steel studs pressed into base•Top surface is satin grained•Secure no-slip foot placement in all weather conditions•Footpegs mount using FLHX/FLTRX OEM taper-style peg mounts or Jaybrake peg mounts PART #1620-0735, sold separately

•Footpegs sold in pairs; matching shift pegs also available separately (sold each)•Made in the U.S.A. with domestic materials

1620-07291620-0731

1603-0106

1603-01071603-0108

DS-243512

1620-0395

DS-243572

1620-0399

DS-2435711620-0396

DS-253065

1603-0058

1620-0391

DS-253032 DS-253033

1603-0060

1603-0059DS-253034

DS-253067

DS-253068

1603-0056 1603-0057

1620-0733 1620-0734

DS-243518

DS-243517

1603-0109

1603-0109

1620-0727


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1034

PART # DESCRIPTION SUG. RETAILDRIVER PEGS1620-0726 Chrome $109.951620-0725 Black anodized 99.95

PART # DESCRIPTION SUG. RETAILPASSENGER PEGS1620-0519 Chrome $109.951620-0520 Black anodized 99.95

PART # DESCRIPTION SUG. RETAILHARDWARE2404-0367 Kit $7.95

MOTO FOOTPEGS•Machined from billet aluminum•Driver footpegs are 45° male-mount design; passenger pegs are straight male-mount design

•Hardware (PART #2404-0367) sold separately•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1624-0155 Black anodized clamp-on O-rings footpegs $189.951624-0156 Black anodized clamp-on wide band footpegs 189.951624-0157 Black anodized clamp-on ribbed footpegs 189.951624-0037 Chrome clamp-on O-rings footpegs 189.951624-0038 Chrome clamp-on wide band footpegs 189.95

PART # DESCRIPTION SUG. RETAIL1624-0039 Chrome clamp-on ribbed footpegs $189.951620-0236 Repl. O-rings (16-pk.) 7.951620-0237 Repl. flat bands (6-pk.) 14.951620-0238 Repl. ribs (16-pk.) 20.95

CLAMP-ON FOOTPEGS•High-quality billet aluminum clamp-on footpegs will fit any highway bar or frame with 11/4” o.d. tubing

•Footpegs sold in pairs•Replacement rubber ribs, flat bands and O-rings sold separately; sold in quantities for one set of pegs, unless noted

PART # DESCRIPTION SUG. RETAILADJUSTABLE LONG FOOTPEGS (41/2” LONG X 21/2” WIDE X 1” THICK)1620-0706 Black anodized $159.951620-0707 Clear anodized 159.95STANDARD LONG FOOTPEGS (39/16” LONG X 21/2” WIDE X 1” THICK)1620-0469 Black anodized 119.951620-0470 Clear anodized 119.95ADJUSTABLE SHORT FOOTPEGS (35/16” LONG X 21/2” WIDE X 1” THICK)1620-0708 Black anodized 149.951620-0709 Clear anodized 149.95

PART # DESCRIPTION SUG. RETAILSTANDARD SHORT FOOTPEGS (35/16” LONG X 21/2” WIDE X 1” THICK)1620-0467 Black anodized $119.951620-0468 Clear anodized 119.95SHORT-PROFILE SHIFTER PEGS (21/8” LONG)1603-0103 Clear anodized 34.951603-0104 Black anodized 34.95STANDARD SHIFTER PEGS1603-0085 Black anodized 34.951603-0086 Clear anodized 34.95

STANDARD AND ADJUSTABLE SERRATED BILLET FOOTPEGS AND SHIFTER PEGS•Give your bike a unique design twist with these all-billet aluminum adjustable serrated footpegs

•Fully CNC-machined from solid 6061 T-6 bar•Superstrong, yet lightweight two-piece construction•The comfortable serrated foot surface area gives you a wider area for your feet and provides a good “bite” onto the bottom of your shoe

•Full 360° footpeg rotation makes these footpegs perfect for any application•Footpegs available with Joker’s exclusive pitch adjustment screw that enables you to change the angle of the peg in order to adjust it to a “level” riding position (if necessary) so the pegs don’t appear to “lay down” with time, vibration, etc.

•Shift pegs have serrations on the top surface only, and the bottom side is smooth to provide non-shoe damaging up-shifts – installs easily to most stock H-D shift arms with a threaded 5/16”-24 mounting hole

•Available in your choice of natural clear anodized or our hard black anodized finish•Male-mount footpegs are available in two different lengths and fit most models with standard Harley female footpeg mounts•Footpegs sold in pairs; shifter pegs sold each•Made in the U.S.A.

1620-0706

1620-0709

1620-0726

2404-0367

1624-0156

1624-0157

1624-0037

1620-0708

1624-0155

1624-00391624-0038

1603-0103

1603-0104

1603-0086

1603-0085

1620-0725 1620-0520


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1035

PART # DESCRIPTION SUG. RETAILWITH HEEL RESTSDS-243525 Billet pegs $131.951904-2002 Billet pegs w/ rubber insert 149.95WITHOUT HEEL RESTSDS-243019 Billet pegs 109.951904-2001 Billet pegs w/ rubber insert 129.95

CHROME BILLET FOOTPEGS•Machined from 6061 T-6 billet aluminum•Male mount style, measure 43/8” L•Available with or without built-in heel rests•Hidden setscrews for height adjustment•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR FXST, FLST WITH WIDE TIRE SWINGARMS (EXCEPT MODELS WITH SHOTGUN EXHAUST)1620-0067 Chrome $240.951620-0068 Black powder-coated 239.95

PART # DESCRIPTION SUG. RETAILFOR ALL FXST, FLST (EXCEPT MODELS WITH SHOTGUN EXHAUST)1620-0069 Black powder-coated $239.951904-1029 Chrome 218.95

REAR SOFTAIL FOLDING FLUSH-MOUNT FOOTPEGS•Pegs are designed to follow the curvature of the frame so when they are in the up position they fit flush with the frame•Fit in the factory rear peg location and take just moments to install; even simpler then the standard peg set up•CNC-machined from 6061 aluminum with chrome finish•Use stainless steel springs and pins•Available in a cutout design•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1603-0093 Chrome $64.951603-0094 Black 64.951603-0095 Brass 81.95

VICE SHIFTER PEGS•Match the Vice hand grips and foot pegs•CNC-machined•Sold each•Made in the U.S.A.

1603-00931603-0094

1603-0095

1620-0068

CHROME ROUND-STYLE FOOTPEGS AND SHIFTER PEG•Footpegs feature a two-piece billet assembly that allows the body to be rotated to fit the rider’s personal preference

•Undercut foot area•Fit standard male mounts•All parts are fully CNC-machined from billet stock•Ball-milled styling and fully chrome-plated•Matching shifter peg available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0177 Footpegs $131.951603-0008 Shifter peg 34.95

1620-0069


RETAIL1620-0566 Chrome $128.951620-0567 Black 128.951620-0568 Solid brass 164.95


RETAIL1620-0569 Male mounts for stock

H-D female clevis, polished stainless (pr.) $82.95

1620-0568

1620-0567

1603-0008

VICE FOOTPEGS•Match the Vice hand grips and shifter pegs•CNC-machined•Removable end cap sealed with an O-ring for easy installation and storage of registration•Will work with stock female Clevis if used with PART #1620-0569 •Male mounts sold separately•Sold in pairs•Made in the U.S.A.

1620-0566

1620-0569

1620-0067

1620-0177

DS-243019

1904-2002


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1036

PART # DESCRIPTION SUG. RETAILFOOTPEGS1904-3393 Round hole, chrome $144.951620-0404 Round hole, black 144.951620-0455 Oval hole, chrome 144.951620-0405 Oval hole, black 144.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1904-1074 Round hole, chrome $56.951603-0062 Round hole, black 56.951904-1079 Oval hole, chrome 56.951603-0063 Oval hole, black 56.95

BILLET FOOTPEGS AND SHIFT PEGS•Machined from 6061 T-6 billet aluminum•Choose from chrome or black finish•Footpegs are available with male mounts•Matching shift pegs sold separately

PART # DESCRIPTION SUG. RETAIL1603-0054 Black $41.951603-0055 Chrome 41.951603-0098 Black diamond-edge 79.95

SHIFTER PEGS•CNC-machined from billet aluminum•Finned detailing•Fits all stock controls•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0379 Black $169.951620-0380 Chrome 169.951620-0676 Black diamond-edge 269.95

REAR FOOTPEGS•Billet aluminum construction•Male-mount design•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0284 1” Ball-milled $202.951620-0285 3” Ball-milled 212.95

PART # DESCRIPTION SUG. RETAILFOOTPEGS (CONT)1620-0286 1” Flamed $204.951620-0287 3” Flamed 212.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1603-0048 Ball-milled $51.951603-0049 Flamed 51.95

1620-0287

1620-0049

1904-3393 1620-0404

1620-0455

1904-1074

1603-0062

1904-1079

1620-0405

1603-0063

1603-0054 1603-0055

1603-00981620-0380

1620-0676

DEAD END FOOTPEGS/SHIFT PEGS•Chrome-plated billet aluminum•Footpegs sold in pairs; shift pegs sold each


1620-0284


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1037

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0516 Rubber-wrapped, chrome (pr.) $99.951620-0517 Rubber wrapped, black (pr.) 99.951620-0692 Rubber insert, chrome (pr.) 199.951620-0693 Rubber insert, black (pr.) 199.95SHIFT PEG1603-0082 Rubber-wrapped, chrome (ea.) 24.951603-0083 Rubber-wrapped, black (ea.) 24.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT COMPONENTS1620-0518 Repl. footpeg rubber for rubber-wrapped (ea.) $5.991603-0084 Repl. shift rubber for rubber-wrapped (ea.) 4.951620-0694 Repl. footpeg rubber for rubber-insert (ea.) 14.951620-0695 Repl. shift rubber for rubber-insert (ea.) 9.952404-0367 Chrome footpeg hardware kit 7.95


RETAILDS-253452 For 00-10 FXST $189.95DS-253450 Universal w/ folding mounts 199.95

CHROME BILLET CLASSIC PASSENGER FOOTPEGS•Billet passenger footpegs that match Performance Machine’s chrome billet classic forward controls

1620-0692

1620-05161620-0517

1603-0082 1603-0083

2404-0367

DS-253452

1620-0191

1620-0565 1603-0012

1603-0092

PART # DESCRIPTION SUG. RETAIL1620-0564 Full knurled black footpegs $173.951620-0689 Full knurled brass footpegs 199.951620-0690 Radial knurled chrome footpegs 173.951620-0691 Radial knurled brass footpegs 199.951603-0102 Radial knurled brass shifter peg 71.951603-0091 Full knurled black shifter peg 69.95

FOOTPEGS AND SHIFTER PEGS•Available in brass or chrome finish•Features a radial or full knurled design•Male mount footpegs sold in pairs, shifter peg sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILMALE-MOUNT FOOTPEGS (PR.)1620-0191 Black footpeg, polished cross $173.951620-0565 Black footpeg, gold cross 173.95SHIFTER/BRAKE PEGS (EA.)1603-0012 Black peg, polished cross 69.951603-0092 Black peg, gold cross 69.95

MALTESE CROSS FOOTPEGS•Made from 6061 billet aluminum•Choice of black anodized or black powder-coated finish

•Perfect match for Maltese Cross grips and risers•Made in the U.S.A.

1620-0691

1620-0564

1620-0690

1620-0689

CONTOUR FOOTPEGS AND SHIFT PEDALS•Designed to match Performance Machine Contour grips•Rubber-wrapped or rubber-insert styles•Male-mount design fits most H-D applications•Available in black anodized or chrome finish•Replacement rubber and chrome hardware upgrade available separately•Made in the U.S.A.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1038

STYLE FOOTPEGS SHIFT PEG REPLACEMENT BANDSDeep Cut, chrome 1620-0522 1603-0087 -Deep Cut, black 1620-0523 1603-0088 -Torpedo 1620-0056 1603-0001 -Rocket 1620-0403 1603-0061 -Retro 1620-0406 1603-0064 -10-band DS-253691 DS-253692 -Twister DS-253701 DS-253703 -Twister, black 1620-0054 1603-0019 -Diamond Twister w/ flat bands

DS-253717 DS-253718 DS-243152 (footpegs, 12-pk.), DS-253729 (shift peg, 4-pk.)

STYLE FOOTPEGS SHIFT PEG REPLACEMENT BANDSKnurled DS-253720 DS-253727 DS-253726 (footpegs, 8-pk.),

DS-253729 (shift peg, 4-pk.)Knurled, flare tip 1620-0439 1603-0070 -Grooved DS-253733 DS-253735 -Grooved, black 1620-0234 1603-0020 -Flamed DS-253740 DS-253742 DS-243152 (footpegs, 12-pk.),

DS-253729 (shift peg, 4-pk.)

PART # SUG. RETAILDS-243152 $13.95DS-253691 109.95DS-253692 42.95DS-253701 109.95DS-253703 39.95DS-253717 109.95

PART # SUG. RETAILDS-253718 $39.95DS-253720 109.95DS-253726 14.95DS-253727 36.95DS-253729 6.95DS-253733 109.95

PART # SUG. RETAILDS-253735 $42.95DS-253740 109.95DS-253742 36.951603-0001 36.951603-0019 59.951603-0020 54.95

PART # SUG. RETAIL1603-0061 $42.951603-0064 42.951603-0070 42.951603-0087 49.951603-0088 49.951620-0054 139.95

PART # SUG. RETAIL1620-0056 $99.951620-0234 139.951620-0403 109.951620-0406 109.951620-0439 129.951620-0522 139.951620-0523 139.95

NESS-TECH® FOOTPEGS AND SHIFT PEGS•Machined from 6061 T-6 billet aluminum; available in chrome or black anodized

•Footpegs are available with male mounts•Matching shift pegs sold separately

PRICE CHART

1620-0522

1620-0403

DS-253701

DS-253720

1620-0406

1620-0054

1620-0439

1620-0234

DS-253691

DS-253717

DS-253733

DS-253740

1620-0523

1620-0056

1603-0001

1603-00881603-0087

1603-0061

DS-253703

DS-253727

1603-0064

1603-0019

1603-0070

1603-0020

DS-253692

DS-253718

DS-253735

DS-253742


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1039

1620-0288

PART # DESCRIPTION SUG. RETAILX-FACTOR PEGS1620-0288 Male mount, 61/4” long $151.95GOTHIC PEGS1624-0025 Male mount, 41/2” long 151.951622-0014 Shifter/brake, 31/2” long (ea.) 71.95KNURLED PEGS1811-8503 Male mount, 51/4” long 151.951811-8505 Rigid mount, 73/4” long 157.951811-8504 Shifter/brake, 21/4” long (ea.) 61.95

PART # DESCRIPTION SUG. RETAILRUBBER PEGSDS-243652 Rubber (male-mount), 51/2” long; chrome $140.951620-0710 Rubber (male-mount), 51/2” long; Night Series 139.95DS-243650 Rigid mount, 73/4” long 157.95DS-243651 Shifter/brake, 37/8” long (pr.) 98.95REPLACEMENT RUBBER INSERTS FOR RUBBER PEGS1904-7540 For shifter/brake peg 8.951904-7541 For male-mount footpeg 8.951904-7542 For rigid-mount footpegs 8.95

CHROME FOOTPEGS AND SHIFTER/BRAKE PEGS•Billet 6061 T-6 aluminum construction•Shifter/brakes peg fits most shifter and brake pedals that accept bolt-on peg


PART # DESCRIPTION SUG. RETAIL1620-0290 Phantomz passenger footpegs $144.95

PHANTOMZ FOLDING PASSENGER FOOTPEGS•High-quality billet aluminum construction with a chrome finish•Match Phantomz forward controls•1/2”-13 mounting holes•Measure 43/4” L; 61/2” L overall with mount•Sold in pairs•Made in the U.S.A.


RETAILFOOTPEGS1620-0071 Rubber $109.951620-0526 Ali Baba 109.95


RETAILSHIFT PEGS1603-0004 Rubber $39.951603-0089 Ali Baba 39.95

CUSTOM FOOTPEGS•Chrome-plated billet footpegs•Mount to OEM-style footpeg clevis•Matching shifter pegs also available•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253411 Male mount footpegs $90.95DS-253412 Shift peg 26.95

DIAMOND II FOOTPEGS AND SHIFT PEGS•High-quality, chrome-plated billet aluminum•Matching covers available for air cleaner, master cylinder and brake caliper insert

•Matching shifter peg sold separately•Made in the U.S.A.

DS-253412

DS-253411

1620-0526

1620-0071 1603-0004

1603-0089

LeftRubber pegs

Rubber pegsRight

1624-0025

1622-0014

DS-243650

1811-8503

DS-243651

1811-8504

DS-243652

1811-8505


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1040

PASSENGER PEGS AND SHIFTER/BRAKE PEGS•Fold-up rubber passenger pegs•Shifter/brake toe peg with rubber insert•Available in chrome or black anodized•Match Hawg Halters forward controls•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILPASSENGER PEGS (PR.)1620-0596 Chrome $234.951620-0597 Black anodized 234.95SHIFTER/BRAKE TOE PEGS (EA.)1603-0096 Chrome 48.95 (ea.)1603-0097 Black anodized 48.95 (ea.)

FOOTPEGS/ MOUNTS AND SHIFTER PEGS•Footpegs and shifter pegs made from 6061 T-6 billet aluminum

•Footpeg mounts machined from 7075 billet aluminum•Spike head footpegs measure 53/4” L•Spike head shifter pegs measure 33/4” L•Polished or black footpeg mounts are offered in two different styles•Footpegs and mounts are sold in pairs and must be purchased separately

•Footpeg mounts work only with Pro-One foot pegs•Shifter pegs fit all models (except V-Rod) and Pro-One forward controls; sold individually


PART # DESCRIPTION SUG. RETAILSPIKE HEAD FOOTPEGS1620-0241 Chrome ball-milled $154.951620-0242 Black ball-milled 154.95POLISHED FOOTPEG MOUNTS1620-0410 Stock Harley-style male mount 88.951620-0411 13/4” male mount, for passenger peg

applications on most stock HD and customs 88.95BLACK FOOTPEG MOUNTS1620-0413 Stock Harley-style male mount 88.951620-0414 13/4” male mount, for passenger peg

applications on most stock HD and customs 88.95

BILLET FOOTPEGS•Available in scimitar, rubber band and ball-milled styles

•Rubber band style matches forward control sets PART #s 1904-0003, 1904-0004 and 1904-0006

•Fit all applications with male mount footpegs•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0050 Scimitar $143.951620-0051 Rubber band 116.95DS-253487 Ball-milled 116.95

ADJUSTABLE BILLET FOOTPEGS•51/2” footpegs can be comfort-adjusted by loosening the center bolt and turning to any angle

•Chrome finish with a ball-milled design•Fit all bikes using male mount footpegs•Sold as a pair•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253489 Adjustable billet footpegs $132.95

1620-0596

1603-0024

1620-0242

1620-0597

1603-0096

1603-0097

1620-0050 1620-0051

DS-253487

FOOTPEGS

PART # DESCRIPTION SUG. RETAIL1603-0023 Chrome ball-milled $48.951603-0024 Black ball-milled 48.95

SHIFTER PEGS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1041

PART # DESCRIPTION SUG. RETAILDS-253309 Banded w/ 1/2”-13 mounting hole $126.95DS-253310 Banded w/ 3/8”-16 mounting hole 115.951620-0283 Slotted w/ 1/2”-13 mounting hole 138.95DS-253011 Repl. footpeg rubbers for Banded pegs (6-pc. set) 13.95

FOLDING FOOTPEGS•Fold-up design adds convenience•Chrome billet footpegs with either 1/2”-13 or 3/8”-16 mounting holes•Two styles available: banded with rubber pads or slotted style•Great match for the Thunder Heart forward controls•Made in the U.S.A.; sold in pairs

PART # DESCRIPTION SUG. RETAILMC220 1”-11/4” U-clamp mount $62.95MC320 1” aluminum mount; index adjustable 67.95

FOOTPEGS•Dress up your bike – or add that finishing custom touch•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOOTPEG MOUNT KIT (BLACK ONLY)1620-0680 For 03-07 XB9R Firebolt, 03-04 XB9S Lightning,

04 XB9SL Lightning, 05-09 XB9SX Lightning, 08-09 1125R, 03-09 XB12R Firebolt, 04-09 XB12S Lightning, 05-09 XB12Scg Lightning, 06-07 XB12Ss Lightning, 08-09 XB12STT Lightning $74.95

STANDARD FOOTPEGS (PR.)1620-0558 Silver 39.951620-0559 Black 44.951620-0560 Chrome 49.951620-0717 Blue 44.951620-0718 Orange 44.951620-0719 Red 44.95

PART # DESCRIPTION SUG. RETAILSTUNT FOOTPEGS (PR.)1620-0561 Black $54.951620-0562 Chrome 59.951620-0720 Blue 54.951620-0721 Orange 54.951620-0722 Red 54.95LONG FOOTPEGS (PR.)1620-0711 Chrome 49.951620-0712 Black 46.951620-0713 Silver 41.951620-0714 Blue 46.951620-0715 Orange 46.951620-0716 Red 46.95

360° ADJUSTABLE FOOTPEG MOUNT KIT AND FOOTPEGS•Adjustable footpeg mount delivers the perfect position for any riding style; mounts directly to OEM rear sets and is adjustable to 56 positions•Mount kit includes two adjustable swivel plates, two folding mounts and all required hardware; must be used with Cycle Pirates footpegs•Standard round footpegs measure 68mm L x 25mm dia., are made from 6061 aluminum and have a knurled surface•Stunter pegs are almost twice the diameter of the standard pegs (65mm L x 45mm dia.), are made from 6061 aluminum and have a knurled surface•Long footpegs measure 80mm L x 25mm dia., are made from 6061 aluminum and have a knurled surface•Mount kit and footpegs can be used with OEM or Cycle Pirates’ adjustable shifter and brake levers (sold separately)

MC220

MC320

DS-253309

1620-0283

1620-0680

1620-0561

1620-0562

1620-0720

1620-0721 1620-0722

1620-0711

1620-07121620-07161620-07151620-0714

1620-0558


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1042

PART # DESCRIPTION SUG. RETAIL1624-0205 Custom contour, chrome $139.951624-0206 Custom contour, black anodized 139.95

PART # DESCRIPTION SUG. RETAIL1624-0207 Tribal, chrome $139.951624-0208 Tribal, black anodized 139.95

CUSTOM SPIKED RIGID PEGS•Ergonomic AVON seamless rubber grip technology

•Available in contoured or tribal designs•3/8”-24 mounting holes•See page 736 for matching hand grips •Sold in pairs•Made in the U.S.A.



CUSTOM SPIKED MALE-MOUNT FOOTPEGS•Custom folding footpegs featuring an ergonomic AVON seamless rubber grip technology•Come in chrome or black anodized•Fit OEM standard female mount•See page 736 for matching grips •Sold in pairs•Made in the U.S.A.



CUSTOM SPIKED SHIFTER PEGS•Feature an ergonomic AVON seamless rubber grip technology•Available in two different styles in either chrome or black anodized•See page 736 for matching hand grips •Sold each•Made in the U.S.A.

1624-02051624-0206

1624-0207

1624-0208

1620-0736 1620-0737

1620-0738

1620-0739

1603-0111 1603-0112 1603-0113 1603-0114

PART # DESCRIPTION SUG. RETAILDS-253007 Small footpegs (mid/rear mount) $84.95DS-253008 Small shifter peg 19.95

COMPETITION FOOTPEGS•Available in satin finish•Fit any male mount application (FX, FXST, FXR, FXD and XL models)•Matching shifter peg available•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFTP-200 Multi-facet style footpegs $99.95

MULTI-FACET FOOTPEGS•Unique design and mirror-like polish reflects light like nothing else•Made of show-quality chrome-plated 6061 T-6 billet aluminum•Measure 4.3” L x 1.375” diameter•Sold in pairs•Made in the U.S.A.

DS-253007

DS-253008


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1043

PART # DESCRIPTION SUG. RETAIL2401-0356 Grooved footpeg bolt kit $23.95

GROOVED FOOTPEG BOLT KIT•Functional, stylish fasteners with grooved socket-heads

•Certified SDF (Seamless and Defect Free) stainless steel, heat treated to a minimum of 180,000 psi (20% stronger than GR8) with threads rolled to a UNJ3A spec

•Sold in set of four•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1904-5041 Footpeg pins $4.95 (ea.)

CHROME FOOTPEG MOUNTING PINS•Chrome-plated hardened steel•Pins are held in place by retaining clips•Eliminate 3/8” bolts held in place by retaining ring

•For 15/16” wide peg mounts•Sold each to consumer; sold to dealers in 10-pack

PART # DESCRIPTION SUG. RETAILSFB-740 Sleek footpeg bolts $24.95

SLEEK FOOTPEG BOLTS•Bolts screw into each other, eliminating unsightly nut and extra thread

•Stainless steel construction with mirror polished heads

•3/8” diameter barrel•Sold in pairs•Made in the U.S.A.

FOOTPEG SPRING WASHERS•Used for creating friction on male-mount footpegs

•Can be used on most aftermarket male-mount footpegs

•Sold each to consumer; sold to dealer in 10-pack

PART # DESCRIPTION SUG. RETAIL1624-0045 For 94-09 FXDL/FXD models, 94-09 FLHTC models and 94-06 FHLTCU models $58.95

SHORT-BONES HIGHWAY PEG BRACKETS•Designed with the short-inseam rider in mind

•Simple and cost-effective way to relocate the stock highway bar pegs

•Bolt-on for Dyna Lowrider•Universal fit for models with 11/4” engine guards when used with engine guard clamp PART #2404-0363 and footpeg clevis mount PART #DS-253483

•Brackets are made of polished billet aluminum•Include easy-to-follow instructions for quick installation•Made in the U.S.A.

PASSENGER FOOTPEG MOUNT KITS•Used for mounting passenger footpegs or replacing existing OEM footpeg mounts•Includes mounting hardware•Accepts most male mount pegs•Available with chrome or black finish•Sold in pairs

1620-0363DS-252990

PART # DESCRIPTION SUG. RETAILDS-253005 Footpeg spring washers; repl. OEM #50912-72 $.95 (ea.)

PART # DESCRIPTION SUG. RETAILDS-252990 For 86-03 XL, chrome; repl. OEM #50610-86T $37.951620-0363 For 04-10 XL models, chrome; repl. OEM #49322-04 84.951620-0705 For 04-10 XL models, black; repl. OEM #49322-04 78.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1044

PART # DESCRIPTION SUG. RETAILDS-253483 Footpeg clevis mount for 84-94 FX, FXR, FXST;

86-93 XL, with 1/2”-20 thread; repl. OEM #50900-72 (ea.) $12.95

DS-253492 Footpeg clevis mount with 3/8-24” thread (pr.) 18.95

REPLACEMENT CHROME FOOTPEG MOUNTS•Make it possible to mount Drag Specialties or OEM footpegs in any location

•Chrome-plated steel construction

PART # DESCRIPTION SUG. RETAIL1620-0183 W/ 2” lockable offset $63.951620-0184 W/ 4” lockable offset 63.95

MALE MOUNT LOCKABLE OFFSETS•Feature a cogged head that lets you adjust the offset

•Gives a huge range of adjustment without the fear of the peg slipping

•Can be used for highway pegs, passenger pegs, or any H-D-style male-mount application

•Tapered end accepts any Küryakyn footpeg•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253593 Offset peg mounts (1/2”-13 mounting bolts) $52.95

OFFSET PEG MOUNTS•Can be adjusted to short, tall or in-between riders

•Allow you to upgrade an existing set of highway or passenger pegs

•Fit all male-style pegs•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0684 For 93-10 FLT, FLHT, FLHR, FLTR, FLHX $99.95

ADJUSTABLE PASSENGER PEG MOUNTS•Direct replacement for the stock passenger floorboards•Accept any male-mount style footpegs or male-mount mini boards•Adjust to any of the three stock positions, and rotate a full 360° around the mount

PART # DESCRIPTION SUG. RETAILDS-253053 2” blocks $17.95DS-253054 3” blocks 17.95DS-253055 4” blocks 17.95DS-253056 5” blocks 19.95

5/8” SQUARE FOOTPEG MOUNTING BLOCKS•Chrome steel construction; available in several lengths

•Accept most female footpegs

•Used on motor mount bars as well as passenger footpeg bars

•Come with 3/8”-16 x 3/4” bolts; sold in pairs

PART # DESCRIPTION SUG. RETAIL1904-8001 Footpeg elevators $86.95

CHROME FOOTPEG ELEVATORS•Used to raise the driver footpegs about 1”

•Include mounting blocks, button head bolts and nuts; sold in pairs


PASSENGER FOOTPEG BRACKET SET•Chrome passenger footpeg mounting plates and clevis replace the rear footrest brackets

•Any male mount pegs can be used with this bracket set

DS-253483 DS-253492

1620-0183

DS-253054DS-253053

DS-253055

DS-253056

1620-0184

PART # DESCRIPTION SUG. RETAILDS-253484 For 85-86 FX; repl. OEM #s 47116-77

and 47117-77 $41.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1045

ROAD-ROD® PASSENGER FOOTPEG RELOCATION KIT•Relocates the passenger footpegs to the swingarm pivot shaft•Includes a pivot shaft, chrome-plated end caps and clevises•Available in chrome or black powder-coat•Made in the U.S.A.

NOTE: Does not fit VRSCD.

FOR 02-10 VRSCA/B/C V-RODPART # DESCRIPTION SUG. RETAILCHROME1620-0005 W/ custom exhaust $249.951620-0045 W/ stock or Screamin’ Eagle exhaust 249.95BLACK1620-0524 W/ custom exhaust 249.951620-0525 W/ stock or Screamin’ Eagle exhaust 249.95

PASSENGER FOOTPEG RELOCATION BRACKETS•Allows use of passenger pegs with RSD/Vance & Hines Tracker 2-into-1 exhaust system

•Raises passenger pegs 4” above OEM location•Machined from billet aluminum with a black powder-coat finish•Mounts directly to existing passenger peg mounting hole•Accepts OEM pegs or any aftermarket male-mount style pegs•All mounting hardware included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0521 For 86-10 FXST/FLST w/ RSD/Vance & Hines

Tracker 2-into-1 exhaust system $69.95

PASSENGER PEG RELOCATION KIT•Designed to relocate the passenger footpegs so the passenger can lean back against a sissy bar

•Attaches to the frame using stock fender strut bolts

•Chrome finish

NOTE: Footpegs and mounting clevis not included in kit.

PASSENGER FOOTPEG RELOCATION KIT•Offers an extra footpeg location for the passenger

•Threads into the unused seat mounting hole

NOTE: Will also fit FLST models if OEM frame-mounted seat is not used.

PART # DESCRIPTION SUG. RETAILDS-253485 For 84-99 FXST $21.95

REAR FOOTPEG MOUNTS•Chrome billet footpeg mounts allow you to replace the rear floorboards on 93-10 FLT/FLHT models with any male mount standard footpegs

•Hardware included•Sold in pairs•Made in the U.S.A.

CHROME FOOTPEG MOUNTS•Used to mount male-mount pegs to JayBrake forward controls or custom applications

•Will accept any male-mount peg•Mount is 2.9” long and has a 3/8”-16 mounting hole•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253063 Male-peg mounts $64.95

CHROME FOOTPEG MOUNTS•Precision-machined billet T-6 aluminum•Accept most male-mount pegs and include

3/8” button head peg mounting bolts•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1811-2990 21/2” front peg mounts

w/ 3/8”-16 x 11/2” mounting bolts $75.951811-2991 11/2” rear peg mounts

w/ 1/2”-13 mounting holes 75.951811-2992 11/2” rear peg mounts

w/ 3/8”-16 x 2” mounting bolts 75.95

SPLINED ADAPTER MOUNTS•For use with Küryakyn peg/offset combinations

•Adapts Küryakyn footpegs or footpeg mounts to Küryakyn offset mounts•Chrome finish•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0671 Splined adapter mounts $23.95

PART # DESCRIPTION SUG. RETAIL1620-0678 Chrome $89.951620-0679 Black anodized 89.95

PART # DESCRIPTION SUG. RETAILDS-253486 For all 84-99 FXST/FLST $19.95

1811-2990 1811-2991

1811-2992

1620-0005

PART # DESCRIPTION SUG. RETAIL1620-0107 For 93-10 FLT/FLHT $75.95

UNIVERSAL FOOTPEG MOUNTS•Clean, stylish design and 6061 T-6 aluminum construction

•Work with any male-mount footpegs•Easy bolt-on design•Threaded to take pre-2000 stock bolt; also counter-bored to accept stock 2000-2009 bolt that mounts through the outside


1620-0678


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1046

1620-0672

PART # DESCRIPTION SUG. RETAILDS-253596 Short Magnum peg mounts $32.95

SHORT MAGNUM PEG MOUNTS•Accept all standard male mount pegs•1/2”-13 threads•Sold in pairs

PART # DESCRIPTION SUG. RETAILHPB-590 Footpeg mounts $33.95

FOOTPEG MOUNTS•Add pegs where you want them

•CNC-machined from billet 6061 T-6 aluminum

•Fit all standard male style pegs•Measure 1.5” x 1” diameter•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-203000 11/4” peg mounts $49.95

11/4” CLAMP-ON PEG MOUNTS•Chrome-plated die-cast design•Accept male mount footpegs only


PART # DESCRIPTION SUG. RETAIL1624-0151 Universal Criuse Peg mounts

w/ 11/2” Magnum Quick Clamp $73.95

UNIVERSAL CRUISE PEG MOUNTS•Uses Küryakyn’s Magnum Quick Clamps and Clevis mounts for custom male-mount footpeg installation

•11/2” diameter clamping area makes these ideal for use on engine guards

•Beautiful chrome finish•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1611-2123 Footpeg clamps; repl. OEM #50957-02 $52.95

TWO-PIECE FOOTPEG CLAMPS•Chrome-plated CNC-machined billet aluminum

•Fit 11/4” engine guards or frame•Accept male-mount pegs•Sold in pairs


RETAILDS-720218 Chrome

universal mounts $29.95

CHROME UNIVERSAL ACCESSORY MOUNTS •Chrome mounts with universal fitment may be used to mount driving lights, footpegs and many other types of accessories

•Fit 1” diameter tubing•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-243803 Chrome clamp assembly $6.25

CHROME CLAMP FOR FOOTPEG BARS•Includes clamps, tapered washers and all necessary nuts and bolts

•Allows installation of footpeg bars to 1” or 11/4” frame members

•Sold each

PART NO. DESCRIPTION PRICE1624-0125 11/4” i.d. fits H-D engine guards (pr.) $43.951624-0126 11/2” i.d. fits some engine guards and Boss Hoss (pr.) 43.95

MAGNUM™ QUICK CLAMPS•Stainless steel construction•1/2” mounting hole•Sold each

PART # DESCRIPTION SUG. RETAIL2404-0362 7/8” $7.952404-0365 1” 7.952404-0366 11/8” 7.952404-0363 11/4” 7.952404-0364 11/2” 9.95

THREE-PIECEFRAME CLAMPS•Heavy-duty, chrome-plated three-piece clamps can be used for mounting exhausts, brake switches, footpegs, driving lights or other custom applications

•Sold each

PART # DESCRIPTION SUG. RETAILHCM-208 1” dia. clamps $52.95HCM-209 11/8” dia. clamps 52.95HCM-210 11/4” dia. clamps 52.95

HIGHWAY FOOTPEG CLAMP AND MOUNT SETS•Three-piece design features chrome-plated steel clamp with billet 6061 T-6 aluminum footpeg mount

•State-of-the-art design resists slipping•Available in 1”, 11/8” and 11/4” dia.•Sold in pairs•Made in the U.S.A.

HCM-208

PART # DESCRIPTION SUG. RETAIL1620-0672 Chrome $139.951620-0673 Black 119.95

BIG BUFFALO FOOTPEG MOUNTS•Designed for use with Big Buffalo or other 1.5” diameter engine guards

•Two-piece clamp design for a clean, custom installation at the height you want

•Accept most male-mount style footpegs•Available in chrome or gloss-black powdercoat•Sold in pairs •Made in the U.S.A.

1620-0673


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1047

PART # DESCRIPTION SUG. RETAILCUSTOM STYLEDS-720185 Small radius $56.95DS-720192 Large radius 56.95THREE-BOLT STYLE7807-0114 Three-bolt hole 68.95

CHROME RADIUS LICENSE PLATE MOUNTS•Radius license plate mounts offer a unique custom look•Custom style available in small radius for fenders up to 8” wide and large radius for fenders 8” and wider

•Both sizes require custom installation; mount using vertical studs on a backing plate

•Three-bolt style fits most OEM fenders that have three-hole bolt pattern (not for bobbed fenders)

•All mounts include frame, backing plate and hardware•Accepts most 4” x 7” license plates•Made in the U.S.A.

NOTE: Check tire-to-fender clearance before operating.

PART # DESCRIPTION SUG. RETAILDS-270110 For 91-08 FLT, FLHT, FLHR and 86-10 FLST models

(except FLSTS/FLSTF, 05-10 FLSTN) $122.95

BILLET LICENSE PLATE MOUNT•Chrome-plated billet aluminum•Eliminates the OEM turn signal bar, fits under stock and most aftermarket taillights

•Designed for 4” x 7” license plates•Can be used with most license plate frames, sold separately•Includes brackets to allow the removal of the OEM license plate mount bar


NOTE: Use of this license plate mount will require custom mounting of rear turn signals. On certain models, mounting holes may need to be enlarged to 5/16”.

PART # DESCRIPTION SUG. RETAILDS-270120 For FX with Quickbob $45.95DS-270119 For FXST and FXWG 28.95

LICENSE PLATE/TAILLIGHT BRACKETS•Brackets mount a cat eye taillight, either as a direct bolt-on replacement for stock 85-86 FXWG and 84-99 FXST rear fenders, or on 85 FX models with our Quickbob fender (DS-380032)

PART # DESCRIPTION SUG. RETAILDS-720814 For 84-10 models w/ the license plate

mounted to the fender above the taillight $26.95

CHROME LICENSE PLATE MOUNT•Chrome 4” x 7” mount comes with dual rubber gaskets, allowing the angle of the mount to be raised or lowered to meet your needs

•All necessary hardware is supplied

PART # DESCRIPTION SUG. RETAILFOR 97-03 FLSTS, 05-07 FLSTSCDS-720133 Steel $49.95DS-720134 Billet 62.95

LAYDOWN LICENSE PLATE MOUNTS•Customized chrome lay-down style license plate mounts

•Replaces the upright OEM mount•Bolts to the mounting tab on the OEM taillight•Includes a chrome support bracket and chrome hardware•Accepts most standard size license plate frames•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL

2030-0343 Left side $68.952030-0344 Right side 68.952030-0345 Left side w/ cat eye light mount 71.952030-0346 Right side w/ cat eye light mount 71.95

SIDE-MOUNT LICENSE PLATE MOUNTS•Simple and sturdy way to mount a license plate

•Mounts horizontally to most 3/4” axles

•Made from tough stainless steel for durability and great finish

•PART #s 2030-0345 and 2030-0346 accept most cat eye style tail lights


DS-270120

DS-270119

DS-720185 DS-720192

7807-0114

2030-0343

2030-0346

DS-720133 DS-720134


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1048

PART # DESCRIPTION SUG. RETAIL2030-0214 4” x 7” license plate frame $24.95

CHROME LICENSE PLATE FRAME•Chrome die-cast metal frame•Measures 4” x 7”•Includes chrome flat-head hardware•Fits great on PART #DS-270110 license mount

PART # DESCRIPTION SUG. RETAILDS-720665 Fits 4” x 7” license plates $59.95

LED LICENSE PLATE FRAME•Chrome-plated frame features two rows of LEDs•Includes red and clear diamond-style lenses•Lights can be wired for tag light, taillight or brake light

PART # DESCRIPTION SUG. RETAIL2040-0045 LED license plate frame $41.95

LED LICENSE PLATE FRAME•Die-cast frame with a chrome finish•Hidden mount design for a smooth look•Features eight dual-function LEDs that can be wired in as additional taillight/brake light and four LED tag lights

•Accepts most 4” x 7” license platesPART # DESCRIPTION SUG. RETAILDS-720833C For 84-05 FXST and 80-86 FXWG models $49.95

GROOVED LICENSE PLATE FRAME•Ball-end-milled aluminum license plate frame designed for use with OEM taillight bracket

•Available in a chrome finish

•Frame measures 83/8” x 47/8”


PART # DESCRIPTION SUG. RETAILDS-720808 Gold $16.95DS-720809 Chrome 12.95

“LIVE TO RIDE” LICENSE PLATE FRAMES•Chrome- or gold-plated “Live to Ride” license plate frame•Features an eagle perched at the top•Center to center on the mounting holes measures 6” x 23/4”

PART # DESCRIPTION SUG. RETAILDS-720812 Eagle Spirit license plate frame, gold $53.95DS-720813 Eagle Spirit license plate frame, chrome 29.95

EAGLE SPIRIT LICENSE PLATE FRAMES•Chrome die-cast license plate frames•Gold or chrome eagle and script embossed on the top of each plate•Measure 5” x 7”•Sold each

PART # DESCRIPTION SUG. RETAILDS-270220 License plate frame $7.95

CHROME LICENSE PLATE FRAME•Chrome die-cast 4” x 7” frame

PART # DESCRIPTION SUG. RETAIL2030-0296 License plate frame $19.95

AUTOMOTIVE LICENSE PLATE FRAME•Chrome-plated frame features a skull design; sized to fit most automobile license plates (12” x 6” license plates)

•A great addition to the truck, trailer or car•Sold each

DS-720808 DS-720809

DS-720812

DS-720813


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1049

PART # DESCRIPTION SUG. RETAILDS-720849 For 84-10 Harley (exc. FLSTS, FXST,

FXDWG, FXWG and VRSCA) $124.95

RADIUS BEND LICENSE/LIGHT BACKING PLATE•Chrome-plated billet aluminum backing plate bolts onto stock fender

•Features curved lines, radius edges and the Ness grooves on the face of the frame, with no visible mounting hardware for that sleek custom look

•Designed with a 30° bend on the taillight mounting section for more visibility on short fender applications

•Provides a solid mount for a Cat Eye taillight (sold separately)•Frames and taillights sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-10 HARLEY (EXCEPT FLSTS, FXST, FXSTD, FXDWG, FXWG AND VRSCA)1905-0254 Rad II $114.95DS-720848 Radius grooved 104.95

CHROME LICENSE BACKING PLATES•Available in billet aluminum•Comes with all hardware•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720187 Stepped $44.95DS-720189 Grooved 46.95

ALTERNATIVE LICENSE PLATE FRAMES•Die-cast radius design blends the frame and backing plate together as one

•May be used with the Ness-Tech® matching backing plate or alone•Features hidden mounting hardware•Available with stepped or grooved design•Measures 7” x 41/16” o.d., with a 63/8” x 33/8” window size and 53/4” x 23/4” mounting pattern


PART # DESCRIPTION SUG. RETAIL1905-0226 Rad II $69.95DS-720850 Radius smooth 64.95DS-720847 Radius grooved 59.952030-0139 Radius w/ light 76.952030-0361 Retro 79.95

CHROME LICENSE PLATE FRAMES•CNC-machined from 6061 T-6 aluminum•Lighted LED license functions as a brake and taillight•No exposed mounting hardware; bolts from the back side•Rad II frame looks best when used with the Ness-Tech® Rad II backing plate PART #1905-0254; the radius license plate frames look best when used with backing plate PART #DS-720848, but will work with others

•Accept most 71/4” x 41/4” license plates

PART # DESCRIPTION SUG. RETAILBLV59000 71/4” x 41/4” $44.95

BILLET LICENSE PLATE FRAME•A necessity for any full-custom project; a huge impact in a high-profile area on any custom job

•CNC-machined to a jewel-like finish, then polished and Cobra Chrome-plated

•Mounting holes measure 53/4” x 23/4” on center•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720160 Chrome w/ lined lens $39.95DS-720170 Chrome w/ lined lens and border 39.95

LICENSE PLATE FRAMES WITH LINED LENS•Distinctive frames are made of ABS plastic with acrylic lenses, and feature a silk-screened line design

•Available with or without border to accept different size plates•Fits up to 4.9” x 8.2” plate size•Made in the U.S.A.

U.S. Patent #284,848.

PART # DESCRIPTION SUG. RETAIL2030-0293 License plate frame assembly w/ LED plate light $60.95

LICENSE PLATE FRAME ASSEMBLY WITH LED LIGHT•Machined from 6061 billet aluminum with a show-polished finish

•Features LED light for plate visibility•Accepts 41/8” x 71/8” license plates•For custom applications•Made in the U.S.A.

DS-720187DS-720189

1905-0254

DS-720848

1905-0226

DS-720850

2030-0139

DS-720847

2030-0361

DS-720160 DS-720170


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1050

PART # DESCRIPTION SUG. RETAILFOR 08-10 FXST/FLST2030-0339 Vertical w/o plate light $199.952030-0335 Vertical w/ plate light 229.952030-0435 Horizontal w/o plate light 199.952030-0449 Horizontal w/ plate light 229.95FOR 86-07 FXST/FLST2030-0257 Vertical w/o plate light 199.952030-0325 Vertical w/ plate light 229.952030-0425 Horizontal w/o plate light 199.952030-0439 Horizontal w/ plate light 229.95FOR 08-10 FXD2030-0341 Vertical w/o plate light 199.952030-0337 Vertical w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 08-10 FXD (CONT)2030-0437 Horizontal w/o plate light $199.952030-0451 Horizontal w/ plate light 229.95FOR 06-07 FXD2030-0262 Vertical w/o plate light 199.952030-0333 Vertical w/ plate light 229.952030-0433 Horizontal w/o plate light 199.952030-0447 Horizontal w/ plate light 229.95FOR 91-05 FXD2030-0258 Vertical w/o plate light 199.952030-0327 Vertical w/ plate light 229.952030-0427 Horizontal w/o plate light 199.952030-0441 Horizontal w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 05-10 XL2030-0261 Vertical w/o plate light $199.952030-0331 Vertical w/ plate light 229.952030-0431 Horizontal w/o plate light 199.952030-0445 Horizontal w/ plate light 229.95FOR 86-04 XL2030-0259 Vertical w/o plate light 199.952030-0329 Vertical w/ plate light 229.952030-0429 Horizontal w/o plate light 199.952030-0443 Horizontal w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 08-10 FXST/FLST2030-0338 Vertical w/o plate light $199.952030-0334 Vertical w/ plate light 229.952030-0436 Horizontal w/o plate light 119.952030-0450 Horizontal w/ plate light 229.95FOR 86-07 FXST/FLST2030-0011 Vertical w/o plate light 199.952030-0324 Vertical w/ plate light 229.952030-0426 Horizontal w/o plate light 199.952030-0440 Horizontal w/ plate light 229.95FOR 08-10 FXD2030-0340 Vertical w/o plate light 199.952030-0336 Vertical w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 08-10 FXD (CONT)2030-0438 Horizontal w/o plate light $199.952030-0452 Horizontal w/ plate light 229.95FOR 06-07 FXD2030-0185 Vertical w/o plate light 199.952030-0332 Vertical w/ plate light 229.952030-0434 Horizontal w/o plate light 199.952030-0448 Horizontal w/ plate light 229.95FOR 91-05 FXD2030-0012 Vertical w/o plate light 199.952030-0326 Vertical w/ plate light 229.952030-0428 Horizontal w/o plate light 199.952030-0442 Horizontal w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 05-10 XL2030-0184 Vertical w/o plate light $199.952030-0330 Vertical w/ plate light 229.952030-0432 Horizontal w/o plate light 199.952030-0446 Horizontal w/ plate light 229.95FOR 86-04 XL2030-0013 Vertical w/o plate light 199.952030-0328 Vertical w/ plate light 229.952030-0430 Horizontal w/o plate light 199.952030-0444 Horizontal w/ plate light 229.95

IN CLOSE LICENSE PLATE HOLDERS•Billet aluminum with no visible fasteners•Most tucked-in holder on the market today•Mounts off the axle on FXST/FLST model applications and off the axle adjuster on FXD/XL applications•Accepts most 4” x 7” license plates•Choice of horizontal or vertical mount•Available with or without illumination•Available in chrome and black powder-coat finish•Not for use with shock relocation kits or saddlebags•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL

2030-0423 Chrome w/ plate light $129.952030-0424 Black w/ plate light 129.95

SLICK SIGNALS LICENSE PLATE FRAME•Polished aluminum with a chrome finish•Dual-function red LEDs•Accepts most 4” x 7” license plates•Can be used in run/turn or run/stop applications

•Includes instructions for wiring•Requires custom installation•Made in the U.S.A.

NOTE: Lighting is not DOT approved.


1410-0047 For Slick Signals PART #2030-0423/0424 $69.95

SLICK SIGNALS FIBERGLASS RECESSED POCKET•Allow you to french in your Slick Signals license plate frame PART #2030-0423/0424 on custom rear fenders

•For custom applications only•Made in the U.S.A.


2030-0093 Chrome $29.952030-0322 Chrome w/ plate lights 59.952030-0260 Black powder-coat 29.952030-0323 Black powder-coat

w/ plate lights 59.95

BEVELED LICENSE PLATE FRAME•Aluminum construction•Blind-hole design for a clean line•Available with chrome or black powder-coat finish

•Available with or without plate lights•Fits all 4” x 7” license plates•Made in the U.S.A.

BLACK

CHROME

2030-0423

2030-02602030-0093

2030-0012 Back view2030-0011 2030-0012 2030-0013

2030-0013 Back view

2030-0433

2030-0434


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1051

PART # DESCRIPTION SUG. RETAIL0902-2001 For 84-02 FXST $185.950902-2002 For 96-01 FXDWG 185.95

LICENSE AND TAILLIGHT MOUNTING BRACKETS•Chrome-plated billet aluminum•20° rake gives more tire clearance for lowered bikes•Accept most flat-backed taillights with a 21/2” center-to-center mounting bolt configuration (must be purchased separately)

•Made in the U.S.A.PART # DESCRIPTION

SUG. RETAIL

2030-0138 Blind-hole plate frame $39.952030-0137 Through-hole plate frame 36.95

CHROME LICENSE PLATE FRAMES•Blind-hole design features mounting studs hidden on the back for an ultra-clean appearance

•Traditionally styled through-hole license plate frame uses countersunk mounting bolts (not included)

•CNC-machined from solid plate aluminum•Fits most 4” x 7” plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0299 For 97-08 FLHR, FLTR, FLHT $63.95

SWEPT EAGLE LICENSE PLATE FRAME•Chrome-plated ABS frame with chrome-plated steel backing plate

•Backing plate is drilled for universal mounting, or mount in place of stock license plate bracket

•Fits 4” x 7” plates

PART # DESCRIPTION SUG. RETAIL2030-0266 For 86-10 FXST/FLST $136.952030-0197 For 90-05 Dyna, 86-07 XL 136.95

CURVED SIDE-MOUNT LICENSE PLATE HOLDER•Built-in license plate light•Sized to fit 4” x 7” license plates

NOTE: Softail applications are compatible with or without Küryakyn swingarm covers.

PART # DESCRIPTION SUG. RETAIL2030-0300 For 97-08 FLHT, 97-08 FLHR

(except 07-08 FLHRSE), 98-08 FLTR $84.95

CURVED LAYDOWN LICENSE PLATE MOUNT•Ball-milled with a chrome-plated finish

•Mount matches the curve of the rear fender for a smooth, clean appearance

•Includes curved license plate frame

•For 4” x 7” plates

PART # DESCRIPTION SUG. RETAIL2030-0144 Small frame (fits 4” x 7” plates) $29.952030-0145 Large frame (fits 43/8” x 8” plates) 29.95

BALL-MILLED LICENSE PLATE FRAMES•Glistening chrome finish with ball-milled accents

•Two sizes to fit most plates (minor modifications to some plates may still be necessary)

PART # DESCRIPTION SUG. RETAIL2030-0189 License plate frame w/ inserts $63.95

LICENSE PLATE ASSEMBLY WITH INSERTS•Chrome-plated, die-cast frame uses removable inserts so it can accommodate large (43/8” x 8”) or small (4” x 7”) license plates

•Fasteners that secure frame to the backing plate are installed from the rear

•Frame must be installed on mounts that measure less than 81/4” wide•Includes backing plate, frame and inserts

PART # DESCRIPTION SUG. RETAIL2030-0191 Curved license plate frame $69.95

CURVED LICENSE PLATE MOUNT WITH FRAME•Adds the finishing touch to Küryakyn’s Tombstone Taillights•Mounts to the existing holes on the Tombstone Taillight base plate (PART # 2010-0083 or 2010-0084)

•Two-piece design encapsulates any 4” x 7” license plate

2030-0138

2030-0137

0902-2002

2030-0144

2030-0266


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1052

PART # DESCRIPTION SUG. RETAIL2030-0192 Curved laydown license plate mount w/ frame $73.95

CURVED LAYDOWN LICENSE PLATE MOUNT WITH FRAME•Curved backing plate and frame meet cleanly for a finished look•For use on any H-D model with the standard 3-bolt mounted license plate bracket

PART # DESCRIPTION SUG. RETAIL2030-0193 Curved license plate frame $59.95

LICENSE PLATE FRAME FOR KÜRYAKYN TURN SIGNAL BAR•Curved license plate frame is designed to mount on Küryakyn’s rear turn signal bar (PART #2040-0421)

•Accepts 4” x 7” license plates

PART # DESCRIPTION SUG. RETAIL2030-0198 For 94-08 Road King and Road Glide

models w/o Tour-Pak® $42.95

LAYDOWN LICENSE PLATE HOLDER•Give your bike a sleeker look•Bracket complements the lines of the fender, mounts in the same location as stock

PART # DESCRIPTION SUG. RETAIL2030-0265 For 06-10 FLHX $73.95

CURVED LICENSE PLATE MOUNT WITH FRAME•Replaces the stock black bracket•Curved look matches the flow of the rear fender

•Requires no drilling to install and uses stock license plate light

PART # DESCRIPTION SUG. RETAIL2040-0500 Amber $69.952040-0501 Red 69.952040-0502 Red/amber 89.95

“WHISKERS” LICENSE PLATE FRAME RETROFIT LED KIT•Replace the halogen lighting in the original “Whiskers” license plate frames with bright LED

•Up to three times brighter than the original halogen lighting

•Same LED strips as used in the new LED “Whiskers” license plate frames

•Available in amber, red or red/amber; red/amber switches from red to amber when turn signal is activated, making it ideal for supplementary running/turn or brake/turn lighting

•Kit includes everything needed to upgrade from halogen to LED

PART # DESCRIPTION SUG. RETAIL2030-0347 Amber LED $159.952030-0348 Red LED 159.952030-0349 Red/amber LED 179.95BLHK01 Mounting hardware kit 11.95

CHROME “WHISKERS” LED LICENSE PLATE FRAMES•Milled 6061 billet aluminum license plate with brilliant chrome plating and even brighter LED lighting

•Frame fits 71/8” x 41/16” plates•Available in three styles: amber LED, red LED and red/amber LED; red/amber LED changes from red to amber when turn signals are activated, making it perfect for supplementary run/turn or brake/turn lighting

•Red LED version can be used as supplementary run/brake/turn lighting if used with Badlands’ Illuminator module

•Chrome mounting hardware sold separately

PART # DESCRIPTION SUG. RETAILBLLPF02 Chrome license plate frame $50.95

CHROME LICENSE PLATE FRAME•Milled from 6061 T-6 1/4” plate aluminum, then ball-milled and chromed for a show-quality finish

•Chromed mounting hardware included•Backing plate not included

2030-0347

BLHK01

2040-0501


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1053

PART # DESCRIPTION SUG. RETAIL2030-0000 Sequential red $179.952030-0001 Sequential amber 179.95

PART # DESCRIPTION SUG. RETAIL2030-0002 Non-sequential red $179.952030-0292 Tag light for license plate frame 14.95

LED DIRECTIONAL LICENSE FRAME•Chrome billet aluminum construction•Features amber or red LEDs in standard or sequential design•Fits most 4” x 7” plates•Optional tag light illuminates the license plate; fits inside the frame•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCHROME7805-1414 Dual row LED $84.95DS-272364 Single row LED 59.95DS-2723661 Single row LED w/

custom design 59.957805-1416 Standard, no LED 23.95BLACK7805-1415 Dual row LED 84.95DS-272365 Single row LED 59.957805-1417 Standard, no LED 23.95

DESCRIPTION PART # SUG. RETAILDS-190036 Chrome $10.95DS-190037 Black 10.952030-0382 Chrome acorn 10.95

PART # DESCRIPTION SUG. RETAILCHROME2030-0380 Dual row LED $106.952030-0377 Single row LED 74.952030-03781 Single row LED w/

custom design 74.95BLACK2030-0381 Dual row LED 106.952030-0379 Single row LED 74.951 Requires chrome acorn

mounting hardware kit.

LED LICENSE PLATE FRAMES WITH OR WITHOUT INTEGRATED TURN SIGNALS•Die-cast aluminum frame with single- or dual-row LED; also available without LED

•Available with or without integrated turn signals; dual-function red LED brake/running lights and single-function amber LED turn signals

•Accepts most 4” x 7” license plates (may require redrilling license plate)•Includes complete instructions and wiring diagram•Available with chrome or black powder-coat finish; chrome version also available with custom design•Optional mounting hardware kits sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720099 Smooth

backing plate $39.95

CHROME LICENSE BACKING PLATE•Chrome billet backing plate available in a smooth design

•Measures 4” x 7”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720175 Ball-milled $50.95DS-720195 Smooth 50.95

CUSTOM BILLET LICENSE PLATE FRAMES•Chrome billet aluminum construction•Available in ball-milled or smooth designs•Measure 71/4” L x 41/4” H”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0270 License plate frame $67.95

WARRIOR 1 LICENSE PLATE FRAME•CNC-machined aluminum with a black finish

•Hidden mounting holes for a clean, smooth look

•Fits most 4” x 7” license plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720801 Nugget style, chrome $12.95DS-720803 Chain-link style, chrome 14.95DS-720805 Twisted style, chrome 14.95

SPECIALTY LICENSE PLATE FRAMES•Available in chrome•Three unique styles: nugget, chain link, and twisted metal•Made in the U.S.A.

2030-0379

2030-0382

DS-272365

OPTIONAL MOUNTING HARDWARE KITS

FRAMES WITH INTEGRATED TURN SIGNALSFRAMES WITHOUT TURN SIGNALS

DS-190036 DS-190037

7805-1417 2030-0377

2030-0378

2030-0380

7805-1414

DS-272364 DS-272366

7805-1415

DS-720801

DS-720803

DS-720805

2030-02922030-0000

DS-720175

DS-720195

7805-1416


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1054

PART # DESCRIPTION SUG. RETAIL2030-0240 Black $75.952030-0241 Chrome 75.952030-0355 Black w/ diamond-edge finish 88.95

LICENSE PLATE FRAMES•CNC-machined from billet aluminum•Accepts most 4” x 7” license plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0250 Contours license plate trim $22.95

CONTOURS LICENSE PLATE TRIM•Chrome-plated accent trim for 4” x 7” license plates

•Includes chrome mounting hardware

•Universal fitment

PART # DESCRIPTION SUG. RETAIL2030-0251 License plate holder with red LED $101.95

LICENSE PLATE HOLDER WITH RED LED•Chrome die-cast construction with dual function running/brake light

•Illuminates license plate for added visibility

•Fits standard 4” x 7” license plates

PART # DESCRIPTION SUG. RETAIL2030-0253 Raised license plate holder $84.95

RAISED LICENSE PLATE HOLDER•Chrome ABS license plate holder with dual-function LED run/brake light


PART # DESCRIPTION SUG. RETAIL2030-0252 Contours LED license plate $75.95

CONTOURS LED LICENSE PLATE HOLDER•Chrome ABS license plate holder with multi-function LED run/brake/turn lights


PART # DESCRIPTION SUG. RETAILDS-720176 Lighted license plate frame $44.95

LIGHTED LICENSE PLATE FRAME•Features 12 LED lights; can be wired to light continually or only when brakes are applied

•Chrome-plated housing with red lens•Adds a superb eye-catching look to any bike

PART # DESCRIPTION SUG. RETAIL2030-0141 LED license plate holder $119.95

CHROME LICENSE PLATE HOLDER WITH LED•Die-cast chrome plate with three LED strips

•Top row of LEDs can be used as auxiliary running or brake light; side rows can be used as auxiliary marker lights

•Accommodates 7” W x 4” H to 81/2” W x 43/8” H plates•Outer frame measures 91/8” W x 51/8” H x 3/4” D

NOTE: Not DOT approved.

PART # DESCRIPTION SUG. RETAILDS-270225 Chrome $9.95DS-270226 Gold 15.95

EAGLE LICENSE PLATE FRAMES•Die-cast license plate frames, available in chrome or gold

•Three-dimensional eagle emblem centered on top of the frame

PART # DESCRIPTION SUG. RETAILMCA-592 Chrome frame $5.95MC-592-1 Black chrome frame 5.95

LICENSE PLATE FRAMES•Die-cast frame surrounds all 7” x 4” plates•Available in chrome or black chrome•Skin-packed on a display card•Sold each

2030-0240

2030-02412030-0355

MCA-592MC-592-1

DS-270225DS-270226


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1055

BAG-IT!™•Now all bikes can have easy-access storage space

•Works on any U.S. license plate bracket and with any Harley-Davidson windshield bag or any bag with a 1” W spaced bag bracket attached to the bag

•Made of one-piece stamped steel with chrome plating•Installation is no harder than putting on a license plate•Features additional holes for added mounting points (should the rider desire it) or allows for virtually any type of small bag to be mounted (bag not included)

NOTE: Requires at least 7” of clearance from the top edge of your license plate to anything above the license plate that may interfere with the Bag-It!.

PART # DESCRIPTION SUG. RETAIL3550-0056 Bag-It! $29.95

LICENSE PLATE SIDE MOUNT BRACKET•Used with all license plates that have a three-hole mounting pattern; mounts the license plate on the left side of the swingarm


PART # DESCRIPTION SUG. RETAILDS-270121 For 87-99 FXST/FLST $121.95

REPLACEMENT LICENSE PLATE BRACKET•Chrome replacement license plate bracket•Mounts to most custom fenders and is adjustable to accept almost any license plate

PART # DESCRIPTION SUG. RETAILDS-193810 For most Harleys (except

FXWG, FXDWG, FLSTS, FXST and FLT); repl. OEM #s 59626-84 and 59983-75 $18.95

LICENSE PLATE/CAT EYE TAILLIGHT MOUNT BRACKET•Allows a cat eye taillight to be flush-mounted along with a license plate, giving a clean, custom look

•Taillight sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-270101 Taillight/license plate mount bracket $23.95

LICENSE BACKING PLATE•Heavy-gauge, highly polished stainless steel backing plate for license only

•Reinforces plate, reduces vibration or bending

•Greatly improves appearance•Fits 4” x 7” plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0420 License backing plate $9.95

LICENSE PLATE MOUNT•Made of 303 stainless steel•Relocates license plate under taillight•Can be used with or without OEM or aftermarket light bars


SLANTED LICENSE PLATE BACKING PLATE•Chrome-plated stamped steel•Slotted holes to fit most plates; measures 7” x 5”•Accepts most license plate frames•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720156 For 97-08 FLHT, FLHR and FLTR models $29.95

LICENSE PLATE FRAME•Features a special radius at the base of the frame to hide the OEM rubber plug on fender

•Billet aluminum construction with a chrome finish•Fits most 4” x 7” license plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0389 For 09-10 FLHX $79.95

PART # DESCRIPTION SUG. RETAIL2030-0383 LED license plate light $25.95

LED LICENSE PLATE LIGHT•Compact and stylish license plate light

•Features black body with white LEDs

•Wire length measures 30cm•Body measures 62mm x 43mm x 21mm•Thread pitch is 1mm and thread diameter is 9.75mm

PART # DESCRIPTION SUG. RETAIL1905-0000 For 91-08 FLT, 86-10 FLST (except FLSTS, FLSTSC,

FLSTSB, FLSTF, 05-10 FLSTN) $59.95


RETAIL2030-0256 For 97-08 FLT/FLHT models $29.95

LICENSE PLATE BAR ELIMINATOR•Allows you to retain the stock saddlebag support brackets when removing the license plate support tube

•Made of 10-gauge steel with a chrome polish•Sold in pairs•Made in the U.S.A.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1056

MILITARY STICKER PLATES•Made of 16-gauge steel•Has a surface area of 2” x 6” for military base sticker

•PART #s 2030-0242 and 2030-0243 mount on front forks, using the two brake caliper bolts on 00-07 Big Twins and Sportsters

•PART #s 2030-0244 and 2030-0245 mount on frame down tubes•Available with chrome or black powder-coat finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 86-10 FLST, 99-03 XL AND 99-10 FXD DYNA MODELS0521-0046 Chrome $29.950521-0683 Black 29.95

PYRAMID COVERS•The Pyramid covers the three holes on the rear fender (above the stock or Eliminator taillight) when relocating the license plate mount

•Available in polished chrome-plated aluminum or black construction


PART # DESCRIPTION SUG. RETAIL1802-0006 Round tip hole plugs $60.951801-0018 Bullet tip hole plugs 60.95

FRAME TUBE HOLE PLUGS•Fill the holes in the rear frame tubes when you remove the stock license plate bar on Dresser models

•Billet aluminum construction with a chrome finish•Sold in pairs•Made in the U.S.A.


RETAILFOR ALL H-D MODELS WITH STANDARD 3-BOLT FENDER-MOUNTED LICENSE PLATE BRACKET2030-0263 interchangeable Maltese Cross or Skull emblem cover $32.952030-0264 Tribal cover 21.95

LICENSE PLATE MOUNTING HOLE COVERS•Covers the exposed holes in the fender when the stock license plate bracket is removed

•Completely cover the “footprint” left by the stock mount•Sold each

PART # DESCRIPTION SUG. RETAIL0521-0443 For 97-08 FLHR (except 07 FLHRSE),

98-08 FLTR, 97-08 FLHT (04 FLHTCSE requires antenna relocation) $29.95

REAR BAR ACCENT•Covers up the exposed license plate mounting bosses when the license plate is moved from the rear bar

•Quick, easy way to add a custom touch

PART # DESCRIPTION SUG. RETAIL2030-0015 Flat style $2.95 (ea.)2030-0016 Wedge style 2.95 (ea.)

LICENSE PLATE MOUNTING GASKETS•Black rubber material•Feature OEM bolt mounting pattern•Sold in packs of five

PART # DESCRIPTION SUG. RETAIL2030-0094 For 11/8” frames $38.952030-0095 For 11/4” frames 38.952030-0268 For 13/8” frames 51.952030-0269 For 11/2” frames 51.95

NON-REMOVABLE INSPECTION PLATE•Billet aluminum with a chrome finish

•Clever design puts the inspection tag over the bolt heads so that it can’t be removed without destroying the tag, making it invalid

•Vertically adjustable to the frame for a parallel fit•Also great for parking permits, beach passes, military passes or any other type of tag


PART # DESCRIPTION SUG. RETAIL2030-0242 Caliper mount; chrome $29.952030-0243 Caliper mount; black 29.952030-0244 Down tube mount; chrome 29.952030-0245 Down tube mount; black 29.95

PART # DESCRIPTION SUG. RETAILCH0620 Inspection sticker plate $2.95

INSPECTION STICKER PLATE•Manufactured from aluminum alloy

•Black vinyl coating to enhance appearance and provide long-lasting wear

•Sold each

AfterBefore

0521-0046 0521-0683

1802-0006

1801-0018

2030-0015

2030-0016

2030-0242

2030-0243

2030-0244

2030-0245

2030-0095

2030-02642030-0263


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1057

PART # DESCRIPTION SUG. RETAILSIDE MOUNTDS-270150 Chrome ball-milled $32.95DS-270151 Chrome triple ball-milled 32.95DS-270152 Chrome triple curve ball-milled 32.95DS-270153 Black ball-milled 26.95DS-270154 Black triple ball-milled 26.95DS-270155 Black triple curve ball-milled 26.95

PART # DESCRIPTION SUG. RETAILCENTER MOUNT7805-9999 Chrome ball-milled $34.952030-0032 Black ball-milled 26.95TEXAS/MARYLAND2030-0200 Chrome ball-milled 32.952030-0267 Black ball-milled 26.95

INSPECTION TAG PLATES•Show-quality designer plates made of 6061 billet aluminum

•Side-mount and center-mount plates have 1/2” mounting hole with a 23/4” square for sticker

•Texas/Maryland plate has 1/2” mounting hole with a 31/2” x 23/8” square for those states that have a larger inspection sticker

•Available in chrome or factory black wrinkle finish

•Choice of three border designs•Made in the U.S.A.

U.S. patent #416,520 and #430,074

PART # DESCRIPTION SUG. RETAILDS-190405 Red $13.95DS-190406 Amber 16.95

LED LICENSE PLATE MOUNTING KITS•Available in red or amber•Can be used as running lights or extra brake lights•Includes 1/4” bolts, nuts and washers•Sold in 4-pack

PART # DESCRIPTION SUG. RETAIL25-9100 LED license plate mounting bolts $29.95

LED LICENSE PLATE MOUNTING BOLTS•Chrome license plate mounting bolts in a hex shape•LED light in the center of each bolt; one red and one blue•LEDs flash; great for wiring to brake lights

PART # DESCRIPTION SUG. RETAIL25-9120 Revolving LED license plate mounting bolts $40.95

REVOLVING LED LICENSE PLATE MOUNTING BOLTS•1” chrome round with revolving LEDs

•Lights are red, green and yellow•Can be wired to brake light circuit

PART # DESCRIPTION SUG. RETAIL25-9140 Skull LED license plate mounting bolts $34.95

SKULL LED LICENSE PLATE MOUNTING BOLTS•Chrome skull license plate bolts•Feature blue LEDs for lighting up the eyes

PART # DESCRIPTION SUG. RETAILCH-100 License plate fasteners $.50 (ea.)

LICENSE PLATE FASTENERS•License plate bolt assembly is complete with a Phillips head bolt, two washers and a locking hex nut

•Thread size of the bolt is 10/24” x 5/8” L•Available in bag of 100

PART # DESCRIPTION SUG. RETAILLP-600 License bolts/nuts, white $.35 (ea.)2030-0010 License bolts/nuts, black .35 (ea.)

NYLON LICENSE PLATE FASTENERS•Will never corrode, rust or loosen•Remove and install with fingers•Sold in bags of 100 bolts and nuts

PART # DESCRIPTION SUG. RETAILDS-190190 License plate acorn set $6.95

LICENSE PLATE ACORN SET•Each set includes four bolts, complete with custom acorn nuts

•Excellent for mounting license plates onto motorcycles



RETAIL

CH150A Amber, (150-pk.) $.50 (ea.)CH150B Blue, (150-pk.) .50 (ea.)CH150R Red, (150-pk.) .50 (ea.)DS-272080 Amber, (40-pk.) .50 (ea.)DS-272081 Red, (40-pk.) .50 (ea.)


RETAIL

DS-272082 Blue, (40-pk.) $.50 (ea.)CH4A Amber, (4-pk.) 2.95 (ea.)CH4B Blue, (4-pk.) 2.95 (ea.)CH4G Green, (4-pk.) 2.95 (ea.)CH4R Red, (4-pk.) 2.95 (ea.)

LICENSE PLATE REFLECTORS•Plastic reflectors commonly used on license plate frames

•Available in 4 pack, small tub of 40 and large tub of 150


DS-270153 DS-270154 DS-270155

DS-270150 DS-270151 DS-270152

2030-0032

2030-0267

CH4A CH4B CH4G

CH4R

LP-6002030-0010


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1058

PART # DESCRIPTION SUG. RETAILAIR SCOOPSDS-280201 For 91-98 Dyna models $141.95DS-280202 For 84-99 FXST/FLST models 141.95E-Z MOUNTDS-280204 For 84-99 FXST/FLST models 49.95

AIR SCOOP•Handcrafted fiberglass with large oval intake opening

•Does not hamper airflow to voltage regulator or oil cooler

•E-Z mount for Softail models makes mounting clean and simple (must be purchased separately)


PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST/FLSTDS-273663 Left side $36.95DS-273664 Right side 36.95

TOOLBOX MOUNTING KITS•Chrome toolbox mounts feature a spacer and longer bolt for spacing the footpeg away from the toolbox

•For the right or left sides; toolboxes must be purchased separately


PART # DESCRIPTION SUG. RETAILDS-273666 For 85-86 FX, FXWG (except FXST) $36.95

TOOLBOX MOUNTING BRACKET•Bolt-on bracket mounts toolbox PART # DS-373655 to left-side passenger peg block

•Stock peg bracket may be turned upside down or relocated to bottom stud


PART # DESCRIPTION SUG. RETAILDS-373655 Right chrome teardrop toolbox;

repl. OEM #64205-40 $65.95DS-373701 Left chrome teardrop toolbox;

repl. OEM #64206-89 65.95

CHROME TEARDROP TOOLBOXES•Beautiful reproductions of the original toolboxes found on the early models

•Available in a chrome finish

PART # DESCRIPTION SUG. RETAILDS-373692 Teardrop toolbox pouch, right $19.95DS-373693 Teardrop toolbox pouch, left 19.95

TEARDROP TOOLBOX POUCHES•Put an end to tools banging around in your teardrop toolbox

•Made from black 1,000-denier Cordura® with a polyurethane coating that offers excellent water resistance

•Zippers are non-rusting and edges are bound to help retain their shape•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-373678 For 84-94 FXR $39.95

STASH TRAY•Provides a great place for tools, spark plugs, gloves, etc.•Durable ABS plastic construction•Fits snugly under the seat between the frame rails on all models with flip-up seat


PART # DESCRIPTION SUG. RETAIL1” TO 11/4” MOUNTDS-373493 10” $187.95DS-373495 7” 176.950713-0056 Repl. clamp 66.9511/2” MOUNT3550-0019 10” 187.953550-0020 7” 176.950713-0057 Repl. clamp 66.95

CHROME STASH TUBES•Available in 10” long or 7” short styles•Measure 21/4” in diameter•Open on both ends for easy access•Clamps included for 1” to 11/4” and 11/2” frame tubes

•CNC machined from billet aluminum and chrome plated

•Replacement clamps available separately•Made in the U.S.A.

DS-280201

DS-280202DS-280204

Replacement clamp

DS-373495

DS-373493

Date post:	21-Feb-2016
Category:	Documents
Upload:	el-shopper
View:	219 times
Download:	0 times

18 FOOTRESTS & LICENSE PLATE FRAMES (Pédalier, support de plaques) 2010

Documents