Date post: | 07-Apr-2018 |
Category: |
Documents |
Upload: | hai-laventure |
View: | 225 times |
Download: | 0 times |
of 197
8/6/2019 1996 Nissan Maxima
1/197
ForewordWelcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest teand strict quality control.
This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles pleasure. Please read through this manual before operating your vehicle.
A separate Warranty Information booklet explains details about the warranties covering your vehicle.
Your NISSAN dealer knows your vehicle best. When you require any service or have any questions, he will be glad to assist you with theresources available to him.
IMPORTANT SAFETY INFORMATION
REMINDERS FOR SAFETY!
Follow these five important driving rules to help ensure a safe andcomplete trip for you and your passengers!
NEVER drive under the influence of alcohol or drugs.
ALWAYS observe posted speed limits and never drive too fastfor conditions.
ALWAYS use your seat belts and appropriate child restraintsystems.
ALWAYS provide information about the proper use of vehiclesafety features to all occupants of the vehicle.
ALWAYS review this Owners Manual for important safety
information.
1995 NISSAN MOTOR CO., LTD.TOKYO, JAPAN
NOTES ON THE INFORMATION CONTAINED IOWNERS MANUAL
This owners manual contains descriptions and operatintions for all systems, features and optional equipment tappear in any model of this vehicle built for any desti
North America, including the continental United Statesand Hawaii. Therefore, you may very well find informatimanual that does not apply to your vehicle.
MODIFICATION OF YOUR VEHICLE
This vehicle should not be modified. Modification could performance, safety or durability, and may even violate goveregulations. In addition, damage or performance problemsfrom modification may not be covered under NISSAN warran
All information, specifications and illustrations in this manual
in effect at the time of printing. NISSAN reserves the right specifications or design without notice and without obligation
8/6/2019 1996 Nissan Maxima
2/197
Welcome To The World Of NISSAN
Your new Nissan is the result of our dedication toproduce the finest in safe, reliable and economi-cal transportation. Your vehicle is the product ofa successful worldwide company that manufac-tures cars and trucks in over 17 countries anddistributes them in 170 countries.
Nissan vehicles are designed and manufacturedby Nissan Motor Co., Ltd. which was founded inTokyo, Japan in 1933, and Nissan affiliates worldwide, collectively growing to become the fifthlargest automaker in the world. In addition to carsand trucks, Nissan also makes textile machinery,
fork-lift trucks, marine engines, boats and otherproducts.
Nissan has made a substantial and growinginvestment in North America, starting with theopening of Nissan Motor Corporation U.S.A. in1960 and continuing with the production of somecars and trucks at one of the worlds most
modern manufacturing facilities Nissan MotorManufacturing Corporation U.S.A. in Smyrna,Tennessee, vehicle styling at Nissan DesignInternational in San Diego, California, and engi-neering at Nissan Research and Development inFarmington Hills, Michigan.
Nissan Motor Corporation U.S.A. and its dealersindirectly employ about 60,000 Americans.
Nissan is also a substantial contributor to theCanadian economy. Nissan Canada Inc., its sup-pliers and over 170 dealers employ approxi-
mately 4,500 people. These include companyemployees and the staffs of Nissan dealers allacross Canada. In addition, many Canadianswork for companies that supply Nissan and Nis-san dealers with materials and services rangingfrom operation of port facilities and transportationservices, to the supply of lubricants, parts andaccessories.
Nissan pioneered the use of electcomputers in automobiles, and has ledtry in improving both performance anciency through new engine designs aof synthetic materials to reduce vehicThe company has also developed wa
quality into its vehicles at each staproduction process, both through extof automation and most impothrough an awareness that people atral element in quality control.
From the time the parts arrived from ers until you took delivery of your nedozens of checks were made to ensurthe best job was being done in proddelivering your vehicle. Nissan also tcare to ensure that when you take youyour dealer for maintenance, the serv
cian will perform his work according tostandards that have been establishfactory.
Safety has also been built into your Nyou know, seat belts are an integral safety systems that will help protect yopassengers in the event of a suddenaccident. We urge you to use the beltsyou drive the vehicle.
The Nissan story of growth and acreflects our major goal: to provide
customer, with a vehicle that is built wand craftsmanship a product that proud to build and you can be proud
AFW0001
8/6/2019 1996 Nissan Maxima
3/197
NISSAN CUSTOMER CARE PROGRAMNISSAN CARES ...
Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with yourvehicle and your NISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with allyour automobile sales and service needs.
However, if there is something that your NISSAN dealercan not assist you with or you would like to provide
NISSAN directly with comments or questions, please
contact our (NISSANs) Consumer Affairs Department
using our toll-free number:
For U.S. mainland customers
1-800-NISSAN-1 (1-800-647-7261)
For Hawaii customers
531-0231 (Oahu Number)
For Canada customers1-800-387-0122
The Consumer Affairs Department will ask for the following information:
Your name, address, and telephone number
Vehicle identification number (on dashboard)
Date of purchase
Current odometer reading
Your NISSAN dealers name
Your comments or questions
You can write to NISSAN with the information on the leftat:
For U.S. mainland customersNissan Motor Corporation U.S.A.Consumer Affairs DepartmentP.O. Box 191Gardena, California 90247
For Hawaii customersNissan Motor Corporation in Hawaii2880 Kilihau St.Honolulu, Hawaii 96819
For Canada customersNissan Canada Inc.P.O. Box 1709, Station BMississauga, Ontario L4Y 4H6
OR
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
8/6/2019 1996 Nissan Maxima
4/197
Contents Instruments and controls
Pre-driving checks and adjustments
Heater, air conditioner and audio system
Starting and driving
In case of emergency
Appearance and interior care
Do-it-yourself operations
Maintenance schedule
Technical and consumer information
Index
8/6/2019 1996 Nissan Maxima
5/197
8/6/2019 1996 Nissan Maxima
6/197
1 Instruments and controls
Meters and gauges ................................................... 1-3
Warning/indicator light and buzzer............................ 1-6
Theft warning ............................................................ 1-9
Windshield wiper and washer switch ...................... 1-11
Rear window and outside mirror
defogger switch ....................................................... 1-12
Headlight and turn signal switch............................. 1-13
Cornering light ......................................................... 1-14
Instrument brightness control.................................. 1-14
Front fog light switch............................................... 1-15Hazard warning flasher switch................................ 1-15
Heated seat............................................................. 1-16
Cigarette lighter and ash trays................................ 1-17
Pocket ..................................................................... 1-17
Cup and card holders ............................................. 1-18
Power window ......................................................... 1-19
Sunroof.................................................................... 1-20
Clock ....................................................................... 1-21
Interior light ............................................................. 1-21Front personal light ................................................. 1-22
Vanity mirror light .................................................... 1-22
Trunk light ............................................................... 1-23
8/6/2019 1996 Nissan Maxima
7/197
Windshield wiper/washer switch (P.1-11)
Instrument brightness control switch (P.1-14)
Meters/gauges (P.1-3)
Theft warning light (P.1-9)Cruise control main switch (P.4-12)
Headlight and turn signal switch (P.1-13)
Hood release lever (P.2-8)Outside mirror remote control (P.2-36)
Fuse box cover (P.7-21)
Tilting steering wheel lock lever (P.2-35)
Driver air bag (P.2-17)
Ignition switch/steering lock (P.4-4)
Cruise control set switch (P.4-12)Cigarette lighter (accessory) (P.1-17)
Hazard warning flasher switch (P.1-15)
Ventilator (P.3-2)
Heater/air conditioner control (P.3-3)
Clock (P.1-21)
Radio/cassette player (P.3-11)/CD player (P.3-21)
Rear window and outside mirror defogger switch (P.1-12)Passenger air bag (P.2-17)
Glove box (P.2-8)
Ash tray (P.1-17)
Heated seatswitch (P.1-16)
See the page indicated in parentheses for operatin
1-2
8/6/2019 1996 Nissan Maxima
8/197
METERS AND GAUGES
1-3
8/6/2019 1996 Nissan Maxima
9/197
SPEEDOMETERThe speedometer indicates vehicle speed.
ODOMETER
The odometer records the total distance thevehicle has been driven.
TRIP ODOMETER
The trip odometer records the distance of
individual trips. Before each trip, set the tripodometer to zero by pushing the RESET but-ton.
TACHOMETERThe tachometer indicates engine speed inrevolutions per minute (r/min).
When engine speed approaches the red
zone, shift to a higher gear. Operating
the engine in the red zone may cause
serious engine damage.
ENGINE COOLANTTEMPERATURE GAUGE
The gauge indicates the coolant tem
The coolant temperature will varyoutside air temperature and driving c
SIC0171 SIC0172
1-4
8/6/2019 1996 Nissan Maxima
10/197
If the gauge indicates over the normal
range, stop the vehicle as soon as safely
possible. If the engine is overheated,continued operation of the vehicle may
seriously damage the engine. See In
case of emergency section for immedi-
ate action required.
FUEL GAUGEThe gauge indicates the APPROXIMATE fuellevel in the tank.
The gauge may move slightly during braking,turning, acceleration, or going up or down hill.
The gauge needle is designed to remain inapproximately the same position, even whenthe ignition key is turned OFF.
Refill the fuel tank before the gauge regis-ters Empty.
The indicator light comes on whetank is getting low. Refuel as sooconvenient, preferably before threaches E. There should be a serve of fuel in the tank whengauge needle reaches E.
SIC0174
1-5
8/6/2019 1996 Nissan Maxima
11/197
or warning light Seat belt warning light Engine oil pressure warning lig
Turn signal/hazard indicator light Low washer fluid warning light CRUISE indicator light
High beam indicator light (blue) or Anti- lock brake warning l ight Air bag warning l ight
Charge warning light Overdrive off indicator light
Door open warning light Malfunction indicator light (MIL)
Checking bulbs
Apply the parking brake and turn the ignitionkey to ON without starting the engine. Thefollowing lights will come on:
, or , ,
The following lights come on briefly and thengo off:
or , ,
If any light fails to come on, it may indicate a
burned-out bulb or an open circuit in the elec-trical system. Have the system repairedpromptly.
Engine oil pressure warning
light
This light warns of low engine oil pressure. Ifthe light flickers or comes on during normaldriving, pull off the road in a safe area, stop theengine immediately and call a NISSAN dealeror other authorized repair shop. Running theengine with the oil pressure warning lighton could cause serious damage to theengine.
The oil pressure warning light is not de-signed to indicate a low oil level. Use thedipstick to check the oil level. See Engineoil in the Do-it-yourself operations section.
Running the engine with the oil p
warning light on could cause
damage to the engine.
Charge warning light
If the light comes on while the running, it may indicate that there is s
wrong with the charging system. engine off and check the alternator belt is loose, broken, missing or iremains on, see your NISSAN dealeately.
WARNING/INDICATOR LIGHTAND BUZZER
1-6
8/6/2019 1996 Nissan Maxima
12/197
Do not continue driving if the belt is
loose, broken or missing.
Door open warning light
This light comes on when any of the doors arenot closed securely while the ignition key isON.
Seat belt warning light andbuzzer
The light and buzzer remind you to fasten seat
belts. The light illuminates whenever the igni-tion key is turned to ON, and will remainilluminated until the drivers seat belt is fas-tened. At the same time, the buzzer will soundfor about six seconds unless the drivers seatbelt is securely fastened.
Refer to Seat belts in the Pre-driving checksand adjustments section for precautions onseat belt usage.
Air bag warning light
When the ignition key is in the ON orSTART position, the air bag light will illumi-nate for about 7 seconds and then turn off.
This means the system is operational.
If any of the following conditions occur, the airbag needs servicing and your vehicle must betaken to your nearest authorized NISSANdealer.
1. The air bag light does not come on for 7seconds and then go off as describedabove.
2. The air bag light flashes intermittently orremains on.
3. The air bag light does not come on at all.
Unless checked and repaired, the Supplemen-tal Restraint System may not function properly.
For additional details on the Air Bag System,see Section 2.
Low washer fluid warninglight
This light comes on when the washer tank fluidis at a low level. Add washer fluid as neces-sary. See the Do-it-yourself operations sec-tion.
or Brake warning lightThis light functions for both the parking brakeand the foot brake systems.
Parking brake indicator
The light comes on when the parkinapplied.
Low brake fluid warning
The light warns of a low brake fluid lelight comes on while the engine is ruthe parking brake not applied, stop tand perform the following:
1. Check the brake fluid level. Add as necessary. See Brake and cin the Do-it-yourself operations
If the level is below the MINIMUon the brake fluid reservoir, do n
until the brake system ha
checked at a NISSAN dealer.
2. If the brake fluid level is correct:
Have the warning system checkNISSAN dealer.
Even if you judge it to be sa
your vehicle towed because d
1-7
8/6/2019 1996 Nissan Maxima
13/197
could be dangerous.
Pressing the brake pedal with the
engine stopped could increase your
stopping distance and require greater
pedal effort as well as pedal travel.
or Anti-lock brakewarning light
If the light comes on while the engine isrunning, it may indicate there is somethingwrong with the anti-lock portion of the brakesystem. Have the system checked by yourNISSAN dealer. However if the light illumi-
nates while starting the engine, it does notindicate a system malfunction.
If an abnormality occurs in the system, theanti-lock function will cease but the ordinarybrakes will continue to operate normally.
If the light comes on while you are driving,contact your NISSAN dealer for repair.
Overdrive off indicator light
This light comes on when the overdrive switchis pushed to the OFF position.
However when the ignition key is in the ON orSTART position and the overdrive switch isnot in the OFF position, the light will
illuminate for about 2 seconds and then turnoff. This means the system is operational.
Turn signal/hazard indicatorlights
The light flashes when the turn signal switchlever or hazard switch is turned on.
High beam indicator light(Blue)
This light comes on when the headlight highbeam is on and goes out when the low beam isselected.
Cruise indicator light
The light comes on while the vehicle speed iscontrolled by the cruise control system. If thelight flickers while the engine is running, it mayindicate there is something wrong with thecruise control system. Have the systemchecked by your NISSAN dealer.
Key reminder buzzer
The buzzer will sound if the driver side door isopened while the key is left in the ignition
switch (ignition switch is turned off). Removethe key and take it with you when leaving thevehicle.
Light reminder buzzer
A buzzer will sound when the driveris opened if the light switch is (ignition switch is turned off).
Turn the light switch off when youvehicle.
Brake pad wear warning
The disc brake pads have audible wings. When a brake pad requires repit will make a high pitched scrapwhen the vehicle is in motion whetthe brake pedal is depressed. Have tchecked as soon as possible if thsound is heard.
1-8
8/6/2019 1996 Nissan Maxima
14/197
Malfunction indicator light(MIL)
If the MIL comes on or blinks while theengine is running, it may indicate a poten-tial emission control problem.
Continued operation without having
the emission control system checked
and repaired as necessary could lead
to poor driveability, reduced fuel
economy, and possible damage to
the emission control system which
may affect your warranty coverage.
Although the vehicle is still driveable,
see your nearest NISSAN dealer as
soon as possible. To avoid system
damage, do not drive at speeds
above 45 MPH (72 km/h). If possible,
avoid hard acceleration or
deceleration.
If the fuel filler cap is not tightened prop-erly, the MIL may come on. Check andsecurely tighten the fuel filler cap, and haveyour vehicle checked as noted above.
The theft warning system provides audio alarm signals if parts of the vdisturbed.
How to activate the theft warsystem
1. Remove the key from the ignition
2. Close all windows. Close and lockhood and trunk lid. The doors caneither with or without the key.
The system can be activated evwindows are open.
THEFT WARNING
1-9
8/6/2019 1996 Nissan Maxima
15/197
3. Confirm that the indicator light comes on.The light will glow for about 30 seconds andthen blink. The system is now activated. If,during this 30 second time period, the dooris unlocked by the key or multi-remotecontroller, or the ignition key is turned toACC, the system will not activate.
If the key is turned quickly when
locking the door, the system may not
activate. Furthermore, if the key is
turned excessively to the unlock po-
sition, the system may be deactivated
when the key is removed. If the indi-
cator light fails to glow for 30 sec-
onds, unlock the door once and lockit again.
Even when the driver and/or passen-
gers are in the vehicle, the system
will activate with all doors
trunk lid and back door lock
ignition key off. Turn the igni
to ACC to turn the system
Theft warning system operat
The warning system will give thealarm:
The headlights blink and the hointermittently. In addition, the stawill not operate.
The alarm automatically turns of3 minutes; however, the alarm w
vate if the vehicle is tampered wThe alarm can be shut off by undoor or trunk lid with the key.
The alarm is activated by:
Unlocking the door or opening thwithout using the key or multi-retroller. (Even if the door is openleasing the door inside lock kntrunk lid is opened by operating t
lever/button, the alarm is activate Opening the hood.
Pushing in or pulling out of the keon the door or trunk lid.
SIC0175
1-10
8/6/2019 1996 Nissan Maxima
16/197
How to stop alarm
The alarm will stop only by unlocking a door ortrunk lid with the key or multi-remote controller.The alarm will not stop if the ignition switch isturned to ACC.
If the system does not operate as de-scribed above, have it checked by yourNISSAN dealer.
The windshield wiper and washer operateswhen the ignition key is in the ACC or ONposition.
Push the lever down to operate the wiper.
Intermittent operation can be adjusted from 3to 21 seconds by turning the knob.(Type B only)
Pull the lever toward you to operate thewasher. Then the wiper will also operate sev-
eral times.
Do not operate the washer c
ously for more than 30 secon
Do not operate the washer if
ervoir tank is dry.
In freezing temperatures the was
lution may freeze on the windsh
obscure your vision. Warm win
WINDSHIELD WIPER ANDWASHER SWITCH
1-11
8/6/2019 1996 Nissan Maxima
17/197
with the defroster before you wash the
windshield.
To defog the rear window glass and outsidemirrors, start the engine and push the switchon. (The indicator light will come on.) Push theswitch again to turn the defogger off.
It will automatically turn off in approximately 15minutes.
When cleaning the inner side of thewindow, be careful not to scratch or
damage the electrical conductors.
SIC0177
REAR WINDOW AND OUTSIDEMIRROR DEFOGGER SWITCH
1-12
8/6/2019 1996 Nissan Maxima
18/197
Lighting
Turn the switch to the position:
The front clearance, side marker, tail, licenseplate and instrument lights will come on.
Turn the switch to the position:
Headlights will come on and all the other lightsremain on.
To select the high beam, push the lever for-ward. Pull it back to select the low beam.
Daytime light system(For Canada)
Even if the headlight control switchheadlights high beams will illumistarting the engine. The headlights
little dimmer than they are with theswitch in the position.
If the parking brake is applied bengine is started, the daytime lights illuminated. The daytime lights will once the parking brake is released. Tthe daytime lights will not turn off wthe parking brake at stop signals, et
When the daytime light system i
tail lights on your vehicle will no
It is necessary at dusk to turn
headlights. Failure to do so coul
an accident injuring yourself and
Passing signal
Pulling the lever toward you will tuheadlight high beam.
SIC0188
HEADLIGHT AND TURN SIGNALSWITCH
1-13
8/6/2019 1996 Nissan Maxima
19/197
Turn signal
Move the lever up or down to signal the turningdirection. When the turn is completed, the turnsignals cancel automatically.
Lane change signalTo indicate a lane change, move the lever upor down to the point where lights begin flash-ing.
The cornering light provides additional illumi-nation toward the turning direction. The lightwill come on when the turn signal lever ismoved to the right or left with the headlightson.
The instrument brightness controlwhen the light switch is in the position.
Turn the control to adjust the briginstrument panel lights (except cpower window switch lights.When the control is turned to the riclick sound is heard, the light intensat maximum. When the control is turleft until a click sound is heard, the li
turned off.
IC1030
CORNERING LIGHT INSTRUMENT BRIGHTNESCONTROL
1-14
8/6/2019 1996 Nissan Maxima
20/197
To turn the fog lights on, turn the headlightswitch to the position, then turn theswitch to the position. To turn them off,turn the switch to the OFF position.
The headlights must be on for the fog lights tooperate.
Push the switch on to warn other drivers whenyou must stop or park under emergency con-ditions. All turn signal lights will flash.
When stalled or stopped on the road-
way under emergency conditions,
move the vehicle well off the road.
Do not use the switch while moving
on the highway unless unusual cir-
cumstances force you to drive so
slowly that your vehicle might be-
come a hazard to other traffic.
Some state laws may prohibit
of the hazard warning flashe
while driving.
Turn signals do not work w
switch is operating.
The flasher can be actuated with thswitch either off or on.
IC1292 SIC0178
FRONT FOG LIGHT SWITCH HAZARD WARNING FLASHERSWITCH
1-15
8/6/2019 1996 Nissan Maxima
21/197
The front seats are warmed by built-in heaters.The switches located on the center consolecan be operated independently of each other.
1. Start the engine.
The battery could run down if the seat
heater is operated while the engine is
not running.
2. Selecting heat range.
For Low heat, press the top of theswitch.
For High heat, press the bottom of theswitch.
For No heat, the switch has a centerOFF position between Low and High.
The indicator light in the switch will illumi-nate when Low or High is selected.
The heater is controlled by a thermostat,automatically turning the heater on and off.The indicator light will remain on as long asthe switch is on.
3. When the vehicles interior is warmed, or
before you leave the vehicle, be sure to turnthe switch off.
Do not use the seat heater for extended
periods, or when the seat is not occu-
pied.
Do not put anything on the seat which
insulates heat, such as a blanket,cushion, seat cover, etc. Otherwise,
the seat may become overheated.
Do not place anything hard or heavy
on the seat or pierce it with
similar object. This may r
damage to the heater.
Any liquid spilled on the hea
should be removed immediat
a dry cloth.
When cleaning the seat, ne
benzine, thinner, or any simil
rials.
If any abnormalities are foun
heated seat does not opera
the switch OFF and have the
checked by your NISSAN deaSIC0179
HEATED SEAT
1-16
8/6/2019 1996 Nissan Maxima
22/197
The cigarette lighter element is an accessory.A genuine NISSAN cigarette lighter or equiva-lent can be purchased from your local NISSANdealer.
The cigarette lighter operates when the igni-tion switch is in the ACC or ON position.
Push the lighter in all the way. When the lighteris heated, it will spring out.
Return the lighter to its original position after
use.
The cigarette lighter should not be used
while driving in order that full attention
may be given to the driving operation.
The pocket should not be use
driving in order that full attention
SIC0180
CIGARETTE LIGHTER AND ASHTRAYS
1-17
8/6/2019 1996 Nissan Maxima
23/197
given to the driving operation.
To accommodate different sized cups, removethe finisher.
The cup and card holders should not be
used while driving in order that full at-
tention may be given to the driving
operation.
Avoid abrupt starting and brakin
the cup holder is being used to
spilling the drink. If the liquid i
can scald you or your passenge
SIC0472
CUP AND CARD HOLDERS
1-18
O O
8/6/2019 1996 Nissan Maxima
24/197
The power window only operates when theignition key is in the ON position.
To open or close the window, push down orpull up the switch and hold it. The main switch(driver side switches) will open or close all thewindows.
Locking passengers window
When the lock button is pushed in, only thedriver side window can be opened or closed.
Push it in again to cancel.
The passenger side switch will open or closeonly the corresponding window. To open orclose the window, hold the switch down or up.
Make sure that all passengers have
their hands, etc. inside the vehicle
before closing the windows.
Do not leave children unattended in-
side the vehicle. They could unknow-ingly activate switches.
Power window automatic swTo fully open the driver side windpletely push down the switch and reneed not be held. The window will cally open all the way. To stop the wipull up the switch toward the CLOS
SIC0182 SIC0183
POWER WINDOW
1-19
SUNROOF
8/6/2019 1996 Nissan Maxima
25/197
The sunroof will only operate when the ignitionkey is in the ON position.
Sliding the sunroof
To open the roof, keep pressing the switch tothe side.
To close the roof, keep pressing the switch tothe side.
Tilting the sunroof
To tilt up, first close the sunroof, then keeppushing the side of the tilt switch. To tiltdown the sunroof, keep pushing the side.
Sun shade
Open/close the sun shade by sliding itbackward/forward.
The shade will open automatically when thesunroof is opened. However, it must be closedmanually.
Be extremely careful not to have any
part of your body in the sunroof
opening while it is closing.
Do not stand up or extend any portion
of your body out of the opening while
driving.
Remove water drops, snow, ice or
sand from the sunroof before open-
ing.
Do not place any heavy object on the
sunroof or surrounding area.
If the sunroof does not close
Turn the ignition key to the
IC1432
SUNROOF
1-20
CLOCK INTERIOR LIGHT
8/6/2019 1996 Nissan Maxima
26/197
position.
1. Remove the cover as illustrated. The shaftend of the sunroof motor will be visible.
2. Using the wrench supplied in the tool bag,
turn the shaft clockwise to close the sun-roof.If the sunroof does not tilt down, turn theshaft counterclockwise to tilt the sunroofdown.
Have the sunroof system checked and re-paired by your NISSAN dealer.
The digital clock displays time when the igni-tion key is in ACC or ON.
If the power supply is disconnected, the clockwill not indicate the correct time. Readjust thetime.
Adjusting the time
Push the H button to adjust the hour.
Push the M button to adjust the minute.
The interior light has a three-positioWhen the switch is in the center kthe light will illuminate when a door i
Interior light timer
The interior light will stay on for seconds when:
The drivers door is unlocked whis removed from the ignition swit
The key is removed from the ignitwhile the drivers door is closed.
The key is removed from the ignit
AIC0500
CLOCK INTERIOR LIGHT
1-21
FRONT PERSONAL LIGHT VANITY MIRROR LIGHT
8/6/2019 1996 Nissan Maxima
27/197
and the drivers door is opened and thenclosed.
The timer is cancelled, and the interior light willturn off when:
The drivers door is locked.
The ignition switch is turned ON.
The light on the vanity mirror will turthe cover on the vanity mirror is ope
IC1019
IC1163
FRONT PERSONAL LIGHT VANITY MIRROR LIGHT
1-22
TRUNK LIGHT
8/6/2019 1996 Nissan Maxima
28/197
The light illuminates when the trunk lid isopened. When the trunk lid is closed, the lightwill go off.
TRUNK LIGHT
1-23
MEMO
8/6/2019 1996 Nissan Maxima
29/197
MEMO
1-24
2 Pre driving checks and adjustments
8/6/2019 1996 Nissan Maxima
30/197
2 Pre-driving checks and adjustments
Key ............................................................................ 2-2Door locks ................................................................. 2-2
Multi-remote control system...................................... 2-5
Hood release............................................................. 2-8
Glove box lock .......................................................... 2-8
Trunk lid lock ............................................................. 2-9
Fuel filler lid lock ..................................................... 2-10
Seats ....................................................................... 2-12
Supplemental restraint system
(Air bag system)...................................................... 2-17Caution and warning labels..................................... 2-21
Air bag warning light ............................................... 2-21
Seat belts ................................................................ 2-23
Child restraints for infants and small children......... 2-29
Tilting steering wheel .............................................. 2-35
Outside mirror remote control ................................. 2-36
Foldable outside mirrors.......................................... 2-36
Inside mirror ............................................................ 2-36
KEY DOOR LOCKS
8/6/2019 1996 Nissan Maxima
31/197
The master key can be used for all the locks.
Record the key number on the key numberplate and keep it in a safe place (such as yourwallet), NOT IN THE CAR. A key number plateis supplied with your key. Keep the plate in asafe place. NISSAN does not record key num-bers so it is very important to keep track ofyour key number plate.
A key number is only necessary when youhave lost all keys and do not have one toduplicate from. If you still have a key, this keycan be duplicated by your NISSAN dealer or alock smith shop.
Locking front doors with keyTo lock the door, turn the key towardof the vehicle.
To unlock, turn it towards the rear.
Locking the front door will simultanethe other doors.
SPA0083
KEY DOOR LOCKS
2-2
8/6/2019 1996 Nissan Maxima
32/197
Locking the doors without keyTo lock from the outside without a key, movethe inside lock knob to the LOCK position.Then close the door.
When locking the door this way, be certain notto leave the key inside the vehicle.
The inside lock knob cannot be set to theLOCK position with the front doors open andwith the key in the ignition.
Always have the doors locked while
driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping toprevent persons from being thrown
from the vehicle. This also helps keep
children and others from unintention-
ally opening the doors, and will help
keep out intruders.
Before opening any door, always look
for and avoid oncoming traffic.
CHILD SAFETY REAR DOOLOCK
Child safety locking helps prevent dbeing opened accidentally, especismall children are in the vehicle.
When the lever is in the lock positiodoor can be opened only from the o
SPA0085
2-3
8/6/2019 1996 Nissan Maxima
33/197
POWER DOOR LOCKThe power door lock system allows you to lockor unlock all doors simultaneously.
Turning the front door key to the front of thevehicle will lock all doors.
Turning the front door key one time to therear of the vehicle will unlock the corre-sponding door. From that position, return-ing the key to Neutral (where the key can
only be removed and inserted.) and turningit to the rear again within 5 seconds willunlock all doors.
Pushing the front door inside lock knob to
the LOCK position will lock all doors.
Operating the lock-unlock switch unlock all doors.
SPA0087
2-4
MULTI-REMOTE CONTROL
8/6/2019 1996 Nissan Maxima
34/197
It is possible to lock/unlock all doorthe drivers and front passengers wrelease the trunk lid and to turn oninterior light by using the remotefrom outside the car.Be sure to remove the key from th
before locking the doors and leavThe remote controller can operatetance of approximately 49 ft (15 mvehicle. (The effective distance depethe conditions around the vehicle.)As many as four remote controlleused with one vehicle. For informcerning the purchase and use of remote controllers, contact yourdealer.
Listed below are conditions o
rences which will damage the
controller.
Do not allow the remote cont
become wet.
Do not drop the remote contr
Do not strike the remote co
sharply against another obje
Do not place the remote contrSPA0277
SYSTEM
2-5
8/6/2019 1996 Nissan Maxima
35/197
an extended period in an area where
temperatures exceed 140F (60C).
DOOR LOCK OPERATION
1. Remove the ignition key.
2. Close all doors.
3. Push the lock button on the remote control-ler.
4. The hazard indicator flashes twice.
5. All doors will lock.
Although door locking with the remote control-ler can be confirmed by looking at the hazardindicator, always check to be sure that thedoors are properly locked before leaving yourvehicle.
DOOR UNLOCK OPERATION
1. Push the unlock button on the remote con-troller.
2. Only the driver side door will unlock. Pushthe unlock button on the remote controlleragain within 5 seconds.
All doors will unlock.3. The interior light will stay on for 30 seconds
when the interior light switch is in the centerk position.
The interior light can be turned off withoutwaiting for 30 seconds by inserting the key intothe ignition and turning it ON or by locking thedoors with the remote controller or by pushingthe interior light button.
OPENING THE DRIVERS ANDFRONT PASSENGERS WINDOW
1. Push the unlock button on the remote con-troller for longer than 1.5 seconds after thedrivers door is unlocked.
2. The drivers and front passengers windowwill open.
The drivers and front passengers windowwill also open after all doors are unlocked
with the remote controller.
The drivers and front passengers win-dow cannot be closed by using the re-mote controller.
TRUNK LID OPENER OPERATION
1. Push the trunk lid release button on theremote controller for longer than 0.5 sec-ond.
2. The trunk lid will open.The trunk lid will not open when the trunk lidcancel lever is in the CANCEL position.It can be opened only with the key.
PANIC ALARM OPERATION
If you are near your vehicle and feened, you may activate the alarm totion as follows:
1. Push the panic alarm button on t
controller for longer than 1.5 sec
2. The theft warning alarm and heastay on for 30 seconds.
3. The alarm will stop when any ofunctions on the remote controller
The remote controller will not fun
When the key is inserted intoswitch.
When the battery in the remoteler is dead.
The distance between the remtroller and vehicle is more tha49 ft (15 m).
2-6
8/6/2019 1996 Nissan Maxima
36/197
BATTERY REPLACEMENT
Replace the battery as follows:1. Open the lid using a suitable tool.
2. Replace the battery with a new one.
Recommended battery: Sanyo CR2025 orequivalent
3. Close the lid securely.
4. Push the remote controller button two orthree times to check its operation.
If the battery is removed for any reasonother than replacement, perform step 4above.
An improperly disposed battery canharm the environment. Always confirmlocal regulations for battery disposal.
The remote controller is water-proof;however, if it does get wet, immediately
wipe completely dry. When changing batteries, do not let dust
or oil get on the controller.
FCC Notice:
This device complies with FCC rules part15. Operation is subject to the followingtwo conditions: (1) This device may notcause harmful interference and (2) this de-vice must accept any interference that may
be received, including interference thatmay cause undesired operation.
This device has been tested and complieswith FCC and DOC/MDC rules. Changes or
modifications not expressly appthe party responsible for complianvoid the users authority to opdevice.
SPA0090
2-7
HOOD RELEASE GLOVE BOX LOCK
8/6/2019 1996 Nissan Maxima
37/197
1. Pull the hood lock release handle k1 lo-cated below the instrument panel; the hoodwill then spring up slightly.
2. Pull the leverk2 at the front of the hood withyour fingertips and raise the hood.
3. When closing the hood, slowly close thehood and make sure it locks into place.
When locking or unlocking the glovethe master key.
The glove box may be opened by phandle.
Keep glove box lid closed while
to help prevent injury in an accid
sudden stop.
SPA0091
2-8
TRUNK LID LOCK
8/6/2019 1996 Nissan Maxima
38/197
Trunk lid release operation
Type AThe trunk lid release lever is located on theoutside of the drivers seat. To open the trunklid, pull up the trunk lid release lever. To close,
push the trunk lid down securely.
Type B
The trunk lid release button is located underthe drivers arm rest.
To open the trunk lid, push the release button.To close, push the trunk lid down securely.
Key operation
To open the trunk lid, turn the key cTo close, lower and push the trunksecurely.
Do not drive with the trunk lid op
could allow dangerous exhaust g
be drawn into the vehicle.
SPA0093
2-9
FUEL FILLER LID LOCK
8/6/2019 1996 Nissan Maxima
39/197
OPENER CANCEL LEVER FORTRUNK LID
When the lever is in the CANCEL position,the trunk lid cannot be opened with the trunklid release lever or handle. It can be openedonly with the key.
Opener lever
Type A
To open the fuel filler lid, pull the opener lever.To lock, close the fuel filler lid securely.
Type B
To open the fuel filler lid, push the opener leverdown. To lock, close the fuel filler lid securely.
FUEL FILLER CAP
The fuel filler cap is a screw-on type. Tighten the cap clockwise until clicks are heard.
Gasoline is extremely flamma
highly explosive under certai
tions. Always stop engine an
smoke or allow open flasparks near the vehicle when
ing.
SPA0095 SPA0096
2-10
8/6/2019 1996 Nissan Maxima
40/197
Fuel may be under pressure. Turn the
cap one-half turn and wait for any
hissing sound to stop, to prevent
fuel from spraying out and possible
personal injury.
Use only a genuine NISSAN fuel fillercap as a replacement. It has a built-in
safety valve needed for proper opera-
tion of the fuel system and emission
control system. An incorrect cap can
result in a serious malfunction and
possible injury.
If fuel is spilled on the vehicle body,
flush it away with water to avoid paint
damage.
If the fuel filler cap is not tightened prop-erly, the MIL may come on.
Put the fuel filler cap on the cap holder while
refueling.
SPA0120
2-11
SEATS
8/6/2019 1996 Nissan Maxima
41/197
SEAT ADJUSTMENT
Do not adjust the drivers seat while
driving. The seat may move suddenly
and could cause loss of control of the
vehicle.
After adjustment, gently rock in the
seat to make sure it is securelylocked.
The seatback should not be reclined
any more than needed for comfort.Seat belts are most effective when
the passenger sits well back and
straight up in the seat. If the seat is
reclined, the risk of sliding under the
lap belt and being injured is
increased.
Forward and backward
Pull the lever up while you slide the seatforward or backward to the desired position.Release the lever to lock the seat in position.
Reclining
Pull the lever up and lean backdesired angle is obtained. To bringback forward again, pull the lever your body forward. The seat back forward.
SPA0097
2-12
8/6/2019 1996 Nissan Maxima
42/197
Seat lifter (Drivers seat)Turn either dial to adjust the angle and heightof the seat cushion to the desired position.
POWER SUPPORT SEAT
Do not adjust the drivers seat while
driving.
The seatback should not be reclined
any more than needed for comfort.
Seat belts are most effective when
the passenger sits well back andstraight up in the seat. If the seat is
reclined, the risk of sliding under the
lap belt and being injuredcreased.
Do not leave children unatten
side the vehicle. They may in
ently activate switches.
Operating tips
The motor has an auto-reset ovetection circuit. If the motor stooperation, wait 30 seconds, then the switch.
SPA0099
2-13
8/6/2019 1996 Nissan Maxima
43/197
Do not operate the power support seatfor along period of time when the engine is off.This will discharge the battery.
Forward and backward
Moving the switch forward or rearward will
slide the seat forward or rearward to the de-sired position.
Reclining
Move the recline switch rearward until thedesired angle is obtained. To bring the seatback forward again, move the switch forwardand move your body forward. The seat backwill move forward.
Seat lifter (Drivers seat)
Push the front or rear end of the switch up ordown to adjust the angle and height of the seatcushion.
Lumbar support (Drivers sea
Turn the lever forward or backwardthe seat lumbar area.
SPA0100
2-14
8/6/2019 1996 Nissan Maxima
44/197
HEAD RESTRAINT
Head restraints should be adjusted
properly as they may provide significant
protection against whiplash injury. Do
not remove them. Check the adjustment
after someone else uses the seat.
Adjust the top of the head restraints level withthe top of your ears.
To raise the head restraint, just pull it up. To
lower, push the lock knob and push the headrestraint down.
SPA0014
2-15
8/6/2019 1996 Nissan Maxima
45/197
REAR SEAT
Center armrest and tray
Pull the armrest forward and lay it horizontal.Then release the lever (inset) and pull the trayforward (If so equipped). In this condition you
are able to gain access to the trunk room.
SPA0102
2-16
SUPPLEMENTAL RESTRAINTSYSTEM (AIR BAG SYSTEM)
8/6/2019 1996 Nissan Maxima
46/197
This Supplemental Restraint System sectioncontains important information concerning thedriver and passenger air bags. The Supple-mental Restraint System Air Bag can helpreduce impact force to the driver and to thefront passenger in certain frontal collisions.
The air bags are designed to supplement thecrash protection provided by the driver andpassenger seat belts and are not a substitutefor them. The seat belts should always becorrectly worn and the driver and front passen-ger seated a suitable distance from the steer-ing wheel and instrument panel. (See Seatbelts for instructions and precautions on seatbelt usage.)
The air bags will operate only when the
ignition switch is in the ON or STARTposition.
The air bags ordinarily will not inflate in
the event of a side impact, rear impact,
roll over, or lower severity frontal colli-
sion; so always wear your seat belts to
help reduce the risk or severity of injury
in various kinds of accidents.
The seat belts and the air bags are mosteffective when you are sitting back andupright in the seat. Air bags inflate withgreat force. If you are unrestrained, lean-ing forward, sitting sideways or out ofposition in any way, you are at greaterrisk of injury or death in a crash and mayalso receive serious or fatal injuriesfrom the air bag if you are up against itwhen it inflates. Always sit back againstthe seatback and use the seat belts.
SPA0043
( )
2-17
8/6/2019 1996 Nissan Maxima
47/197
Never let children ride unrestrained as
shown in the previous illustrations.
Children may be severely injured or
killed when the air bag inflates if they are
not properly restrained.
Also, never install a rear-facing child
restraint in the front seat. See Child
restraints for infants and small childrenfor details.
SPA0045 SPA0046
2-18
8/6/2019 1996 Nissan Maxima
48/197
Air bag system
The driver air bag is located in the center of thesteering wheel; the front passenger air bag ismounted in the dashboard above the glovebox. The air bag system is designed to inflatein higher severity frontal collisions, although itmay inflate if the forces in another type ofcollision are similar to those of a higher sever-ity frontal impact. It may not inflate in certainfrontal collisions. Vehicle damage (or lack of it)is not always an indication of proper air bagoperation.
When the air bag inflates, a fairly loud noisemay be heard, followed by release of smoke.
This smoke is not harmful and does not indi-
cate a fire, but care should be taken not tointentionally inhale it, as it may cause irritationand choking. Those with a history of breathingtrouble should get fresh air promptly.
Air bags, along with the use of seat belts, helpto cushion the impact force on the face andchest of the occupant. They can help savelives and reduce serious injuries. However, aninflating air bag may cause facial abrasions orother injuries. Air bags do not provide restraintto the lower body.
The seat belts should be correctly worn andthe driver and passenger seated upright as far
as practical away from the steeringdashboard. Since the air bag inflatesorder to help protect the occupant, ththe air bag inflating can increase tinjury if the occupant is too closeagainst the air bag module during in
The air bag will deflate quickly after a
The air bags will operate only ignition switch is in the ON or position.
Right after inflation, several
system components will be
not touch them; you may sburn yourself.
No unauthorized changes sh
made to any components or w
the air bag system. This is to
accidental inflation of the ai
damage to the air bag system
Tampering with the air bag
may result in serious persona
Tampering includes changes
steering wheel and the ins
panel assembly by placing
SPA0103
2-19
8/6/2019 1996 Nissan Maxima
49/197
over the steering wheel pad and
above the dashboard, or by installing
additional trim material around the air
bag system.
Do not attach any objects to the
steering wheel pad and to the instru-
ment panel. Also, do not place any
objects between any occupant and
the steering wheel or instrument
panel. Such objects may become
dangerous projectiles and cause in-
jury if the air bag inflates.
Work around and on the air bag sys-
tem should be done by an authorized
NISSAN dealer. Installation of electri-cal equipment should also be done
by an authorized NISSAN dealer. The
SRS wiring harnesses* should not be
modified or disconnected. Unautho-
rized electrical test equipment and
probing devices should not be used
on the air bag system.
* SRS wiring harnesses are covered
with yellow insulation either just be-fore the harness connectors or for
the complete harness, for easy
identification.
2-20
CAUTION AND WARNINGLABELS
AIR BAG WARNING LIGHT
8/6/2019 1996 Nissan Maxima
50/197
Caution and warning labels about the air bag
system are placed in the vehicle.
The air bag light, displaying AIR BA
instrument panel, monitors the circair bag. The circuits monitored by tlight are the diagnosis sensor unmodules and all related wiring.
When the ignition key is in theSTART position, the air bag light nate for about 7 seconds and theThis means the system is operation
SPA0104
2-21
8/6/2019 1996 Nissan Maxima
51/197
If any of the following conditions occurs, the airbag needs servicing and should be taken toyour nearest authorized NISSAN dealer:
1. The air bag light goes off within 7 seconds.
2. The air bag light flashes intermittently or
remains on (after 7 seconds).3. The air bag light does not come on at all.
Under these conditions, the Supplemental Re-straint System Air Bag will not operate prop-erly. It must be checked and repaired.
Take your vehicle to the nearest authorizedNISSAN dealer.
Repair and replacement procedure
The air bag system is designed to inflate on aone-time-only basis. As a reminder, unless it isdamaged, the air bag light will remain illumi-nated after inflation has occurred. Repair andreplacement of the air bag system should bedone only by authorized NISSAN dealers. Toensure long-term functioning, the systemmust be inspected 10 years after the date ofmanufacture noted on the certification la-bel located on the driver side center pillar.
When maintenance work is required on thevehicle, the air bag system and related partsshould be pointed out to the person conductingthe maintenance. The ignition key should al-
ways be in the LOCK position when workingunder the hood or inside the vehicle.
Once the air bag has inflated, the air
bag module will not function againand must be replaced. The air bag
module cannot be repaired.
After an air bag inflates, the front
instrument panel assembly should be
replaced by your NISSAN dealer.
The air bag system should be in-
spected by an authorized NISSAN
dealer if there is any damage to the
front end portion of the vehicle orreplaced if the air bag has inflated.
When selling your vehicle, we re-
quest that you inform the buyer about
the air bag system and guide the
buyer to the appropriate sections in
this Owners Manual.
If you need to dispose of an air bag or
scrap the vehicle, contact an autho-rized NISSAN dealer. Correct air bag
disposal procedures are set forth in
the appropriate NISSAN
Manual. Incorrect disposal
dures could cause personal i
2-22
PRECAUTIONS ON SEAT BELT t i t d B th t b lt t B t b th f ll i
SEAT BELTS
8/6/2019 1996 Nissan Maxima
52/197
PRECAUTIONS ON SEAT BELTUSAGE
Your chances of being injured or killed in anaccident and/or the severity of injury may begreatly reduced if you are wearing your seat
belt and it is properly adjusted. NISSANstrongly encourages you and all of your pas-sengers to buckle up every time you drive,even if your seating position includes an airbag.
Some states, provinces or territories re-quire that seat belts be worn at all timeswhen a vehicle is being driven.
Every person who drives or rides in
this vehicle should use a seat belt at
all times. Children should be in ap-
propriate child restraints.
The belt should be adjusted properly
and to a snug fit. Failure to do so will
reduce the effectiveness of the entire
restraint system and increase the
chance or severity of injury in anaccident.
Do not wear the belt inside out or
twisted. Be sure the seat belt tongue
is securely fastened to the proper
buckle.
Do not allow more than one person to
use the same belt.
All seat belt assemblies including re-tractors and attaching hardware
should be inspected by your NISSAN
dealer after any collision. NISSAN
recommends that all seat belt assem-
blies in use during a collision be
replaced unless the collision was mi-
nor and the belts show no damage
and continue to operate properly.
Seat belt assemblies not in use dur-
ing a collision should also be in-
spected and replaced if either dam-
age or improper operation is noted.
Never carry more people in the ve-
hicle than there are seat belts.
If the seat belt warning lamp glows con-
tinuously while the ignition is turned
ON with all doors closed and all seat
belts fastened, it may indicate a mal-function in the system. Have the system
checked by your NISSAN dealer.
Be sure to observe the followi
tions when using seat belts. Fa
do so could increase the chance
severity of injury in an accident
Always route the shoulder b
your shoulder and across you
Never run the belt under you
across your neck. The belt sh
away from your face and ne
not falling off your shoulder.
Position the lap belt as low
sible AROUND THE HIPS, N
WAIST.
Serious injury or death can
the seat belt is not worn prop
CHILD SAFETY
Children need adults to help prot
All U.S. states and provinces of Cquire the use of approved child resinfants and small children. (See straints for infants and small childrethis section.)
In addition, there are many typerestraints available for larger childshould be used for maximum protec
2-23
I f t ll hild St d d C di M t V hi l S f t
8/6/2019 1996 Nissan Maxima
53/197
Infant or small child
NISSAN recommends that infants or smallchildren be placed in child restraint systemsthat comply with Federal Motor Vehicle SafetyStandards or Canadian Motor Vehicle SafetyStandards. You should choose a child restraintsystem that fits your vehicle and always followthe manufacturers instructions for installationand use.
Children
Children who are too large for child restraintsystems should be seated and restrained bythe seat belts which are provided.
NISSAN recommends that children sit in the
rear seat if possible. According to accidentstatistics, children are safer when properlyrestrained in the rear seat than in the frontseat.
If the childs seating position has a shoulderbelt that fits close to the face or neck, the useof a booster seat (commercially available) mayhelp overcome this. The booster seat shouldraise the child so that the shoulder belt isproperly positioned across the top, middle
portion of the shoulder and the lap belt is lowon the hips. The booster seat should fit thevehicle seat and have a label certifying that itcomplies with Federal Motor Vehicle Safety
Standards or Canadian Motor Vehicle SafetyStandards. Once the child has grown so theshoulder belt is no longer on or near the faceand neck, use the shoulder belt without thebooster seat.
Never let a child stand or kneel on any seat
and do not allow a child in the cargo areaswhile the vehicle is moving.
Pregnant women
NISSAN recommends that pregnant womenuse seat belts. Contact your doctor for specificrecommendations. The lap belt should beworn snug and positioned as low as possiblearound the hips, not the waist.
Injured persons
NISSAN recommends that injured personsuse seat belts, depending on the injury. Checkwith your doctor for specific recommendations.
2-24
8/6/2019 1996 Nissan Maxima
54/197
3-POINT TYPE SEAT BELT WITH
RETRACTOR
Every person who drives or rides in this
vehicle should wear a seat belt at all
times.
Fastening the belts
1. Adjust the seat.
The seatback should not be reclined any
more than needed for comfort when the
vehicle is moving. Seat belts are most
effective when the passenger sits well
back and straight up in the seat. If the
seat is reclined, the risk of sliding under
the lap belt and being injured is
increased.
2. Slowly pull the seat belt out of th
and insert the tongue into the bucsnaps.
The retractor is designed to locksudden stop or on impact. A slomotion will permit the belt to mallow you some freedom of movthe seat.
3. Position the lap belt portion lohips as shown.
4. Pull the shoulder belt portion tretractor to take up extra slack.
The front passenger side seat bel
MPA0002 SPA0106
2-25
3 point seat belts have a cinching mechanism Checking seat belt operation
8/6/2019 1996 Nissan Maxima
55/197
3-point seat belts have a cinching mechanismfor child seat installation. It is referred to as theautomatic locking mode.
When the cinching mechanism is activated theseat belt cannot be withdrawn again until theseat belt tongue is detached from the buckle
and fully retracted. Refer to Child restraints forinfants and small children later in this sectionfor more information.
The automatic locking mode should
be used only for child seat installa-
tion. During normal seat belt use by a
passenger, the locking mode should
not be activated. If it is activated it
may cause uncomfortable seat belt
tension.
Unfastening the belts
To unfasten the belt, press the button on thebuckle. The seat belt will automatically retract.
Checking seat belt operation(3-point type with retractor)
Your seat belt retractors are designed to lockbelt movement using two separate methods:
1) When the belt is pulled quickly from the
retractor.2) When the vehicle slows down rapidly.
You can check their operation as follows:
Grasp the shoulder belt and pull quicklyforward. The retractor should lock and re-strict further belt movement.
If the retractor does not lock during this checkor if you have any questions about belt opera-tion, see your NISSAN dealer.
Shoulder belt height adjustm
(For front seats)The shoulder belt anchor height adjusted to the position best for Precautions on seat belt usage.) push the release button, and then the desired position, so that the beover the center of the shoulder.should be away from your face andnot falling off of your shoulder.
2-26
8/6/2019 1996 Nissan Maxima
56/197
After adjustment, release the button and
move it up and down to make sure the
shoulder belt anchor is securely fixed in
position.
2-POINT TYPE WITHOUT
RETRACTOR (center position ofrear seat)
Fastening the belts
1. Insert the tongue into the buckle markedCENTER until it snaps.
2. To lengthen, hold the tongue
angle to the belt and pull on thshorten, pull the end of the belt athe belt clip away from the tonguepull the belt clip to take up the sl
SPA0278
2-27
SEAT BELT EXTENDERS
8/6/2019 1996 Nissan Maxima
57/197
3. Position the lap belt low on the hips as
illustrated.Unfastening the belts
To unfasten the belt, press the button on thebuckle.
Selecting correct set of belts
The center seat belt buckle and tongue areidentified by the CENTER label. The centerseat belt tongue can be fastened only into thecenter seat belt buckle.
SEAT BELT EXTENDERS
If, because of body size or driving ponot possible to properly fit the lap-shand fasten it, an extender is availablcompatible with the installed seat extender adds approximately 8 in
mm) of length and may be used fordriver or front passenger seating posyour NISSAN dealer for assistancetender is required.
Only NISSAN belt extenders, m
the same company which m
original equipment belts, sh
used with NISSAN belts.
Persons who can use the s
seat belt should not use an ex
Such unnecessary use could
serious personal injury in the
an accident.
SPA0280 SPA0281
2-28
SEAT BELT MAINTENANCE Child restraints specially designed
CHILD RESTRAINTS FORINFANTS AND SMALL CHILDREN
8/6/2019 1996 Nissan Maxima
58/197
SEAT BELT MAINTENANCE
To clean the belt webbings, apply a mildsoap solution or any solution recommendedfor cleaning upholstery or carpets. Thenbrush the webbing, wipe it with a cloth andallow it to dry in the shade. Do not allow the
belts to retract until they are completely dry.
Periodically check to see that the beltand the metal components such as buck-les, tongues, retractors, flexible wires andanchors work properly. If loose parts, dete-rioration, cuts or other damage on the web-bing is found, the entire belt assemblyshould be replaced.
Infants and small children should al-ways be placed in an appropriate childrestraint while riding in the vehicle. Fail-ure to use a child restraint can result in
serious injury or death.
Children and infants should never becarried on your lap. It is not possible foreven the strongest adult to resist theforces of a severe accident. The childcould be crushed between the adult andparts of the vehicle. Also, do not put thesame seat belt around both your childand yourself. In general, child restraints
are designed to be installed with a lapbelt or the lap portion of a three-pointtype seat belt.
Nissan recommends that the child re-straint be installed in the rear seat. Ac-cording to accident statistics, childrenare safer when properly restrained in therear seat than in the front seat.
An improperly installed child restraint
could lead to serious injury or death inan accident.
Child restraints specially designed and small children are offered bmanufacturers. When selecting anstraint, keep the following points in
1) Choose only a restraint with a labing that it complies with Fede
Vehicle Safety Standard 213 or Motor Vehicle Safety Standard 2
2) Place your child in the child rescheck the various adjustments tthe child restraint is compatiblechild. Always follow all recommecedures.
3) Check the child restraint in your be sure it is compatible with theseat belt system.
Never install a rear-facing c
straint in the front seat. A rea
child restraint must only be
the rear seat. See Installa
front passenger seat for det
Follow all of the child restrain
facturers instructions for ins
and use. When purchasing
restraint, be sure to select on
will fit your child and vehicle
2-29
not be possible to properly install upright as possible.
8/6/2019 1996 Nissan Maxima
59/197
p p p y
some types of child restraints in your
vehicle.
Improper use of a child restraint can
result in increased injuries for both
the infant or child and other occu-
pants in the vehicle.
When your child restraint is not in
use, store it in the trunk or keep it
secured with a seat belt to prevent it
from being thrown forward in case of
a sudden stop or accident.
After attaching a child restraint, test
the restraint before you place the
child in it. Tilt it from side to side. Tryto tug it forward and check to see if
the belt holds it in place. If the re-
straint is not secure, tighten the belt
as necessary, or put the restraint in
another seat and test it again.
If the child restraint is not anchored
properly, the risk of a child being
injured in a collision or a sudden stop
greatly increases. Adjustable seatbacks should be posi-
tioned to fit the child restraint, but as
p g p
Remember that a child restraint left in
a closed vehicle can become very
hot. Check the seating surface and
buckles before placing your child in
the child restraint.
All U.S. states and provinces of
Canada require that infants and small
children be restrained in approved
child restraints at all times while the
vehicle is being operated.
For a front facing child restraint, if the
seat position where it is installed has
a 3-point type lap/shoulder belt,
check to make sure the shoulder beltdoes not go in front of the childs face
or neck. If it does, put the shoulder
belt behind the child restraint.
Installation on rear seat
Center lap belt
Secure the child restraint with the lillustrated. Remove all slack in the la very tight fit by pulling forcefully obelt adjustment.
After attaching the child restraint, tesyou place the child in it. Tilt the restside to side. If it is not secure, try to tbelt again, or put the restraint in ano
2-30
in a sudden stop or collision
8/6/2019 1996 Nissan Maxima
60/197
Installation on rear outboard seating
positions
The 3-point belt on your vehicle is
equipped with a locking mode retrac-
tor which must be used when install-
ing a child restraint.
Failure to do so will result in the child
restraint not being properly secured.It could tip over or otherwise be un-
secured and cause injury to the child
p
When you install a child restraint outboard seat, follow these steps:
1. Position the child restraint on thcan be placed in a forward faci
facing direction, depending on tthe child. Always follow the restrafacturers instructions.
2. Route the seat belt tongue througrestraint and insert it into the buyou hear and feel the latch enga
Be sure to follow the child restraintturers instructions for belt routing.
3. Pull on the shoulder belt until all
is fully extended and a click is heatime, the belt retractor is in the locking mode (child restraint modrevert back to emergency lockthe belt is fully retracted.)
4. Allow the belt to retract. A clickwill be heard as the belt retrindicates that the retractor is inmatic locking mode. Pull down onremove any slack in the belt.
PD1174 PD1331
2-31
seat belt is allowed to wind back into the
8/6/2019 1996 Nissan Maxima
61/197
5. Before placing the child in the child re-
straint, use force to tilt the child restraintfrom side to side, and tug it forward to makesure that it is securely held in place.
6. Check that the retractor is in the automaticlocking mode by trying to pull more belt outof the retractor. If you cannot pull any morebelt webbing out of the retractor, the belt isin the automatic locking mode.
7. Check to make sure that the child restraint
is properly secured prior to each use. If thebelt is not locked, repeat steps 3 through 6.
After the child restraint is removed and the
retractor, the automatic locking mode (childrestraint mode) is canceled; the seat belt maybe used as normal and will only lock during asudden stop or impact.
Top strap child restraint
If your child restraint has a top strap,anchor bracket to the provided ancSecure the child restraint with the cbelt or the lap portion of an outboabelt and latch the top strap hookappropriate anchor bracket. To instchor bracket, a metric bolt of the dilisted below must be used.
Bolt diameter: 8.0 mm
Bolt length: more than 1.18 in Thread pitch: 1.25 mm
The top strap should be secured to t
PD1332
2-32
ing bolt which provides the straightest installa-i f h
are pre-cut circles at each anl i h h ld b k
8/6/2019 1996 Nissan Maxima
62/197
tion of the top strap.
Child restraint anchor points are designedto withstand only those loads imposed bycorrectly fitted child restraints. Under nocircumstances are they to be used for adult
seat belts or harnesses.
Anchor point locations
Anchor points are located under the rear par-cel shelf finisher.
To use attaching hardware for child restraintswith top straps, follow these instructions care-fully:
1. Open the trunk and find the anchor pointnuts on the under side of the rear parcelshelf. Thread a bolt (8.0 mm diameter, 1.25pitch) up through the nut behind the seatingposition where the child restraint will beinstalled and use it to break through therear parcel shelf support material. There
location that should break awayshelf support material when papplied to them. Remove the bolfeel the pre-cut circle separateshelf support material.
2. Cut a small slit through the pafabric at the anchor point locatiothrough the fabric with a tool suchof needle-nose pliers and removcut circle in the parcel shelf supprial.
3. Install the bolt through the top sand into the anchor point nut.
4. Be sure to follow all of the instruaccompany the top strap attach
ware.
Your NISSAN dealer can assist yoinstallation of your child restraint.
SPA0117
2-33
possible. not be used in the front seat.
8/6/2019 1996 Nissan Maxima
63/197
Installation on front passenger seat
Never install a rear-facing child restraint
in the front passenger seat. Air bags
inflate with great force. A rear-facing
child restraint could be struck by the air
bag in a crash and could seriously injure
or kill your child.
If you install a forward-facing child re-straint in the front passenger seat, place
the passenger seat as far back as
A child restraint with a top strap should not beused in the front passenger seat.
The 3-point belt in your vehicle is
equipped with a locking mode retrac-
tor which must be used when install-
ing a child restraint.
Failure to use the retractors locking
mode may result in the child restraint
not being properly secured. The re-
straint could tip over or otherwise be
unsecured and cause injury to thechild in a sudden stop or collision.
When you install a child restraint in the frontseat, follow these steps:
1. Position the child restraint on the frontpassenger seat. It should be placed in aforward-facing direction only. Move theseat as far back from the instrument panel
as possible. Always follow the child re-straint manufacturers instructions. Childrestraints for infants must be used in therear-facing direction and therefore must
2. Route the seat belt tongue througrestraint and insert it into the buyou hear and feel the latch enga
APD0503
2-34
5. Before placing the child in the child re-straint use force to tilt the child restraint
TILTING STEERING WHEEL
8/6/2019 1996 Nissan Maxima
64/197
Be sure to follow the child restraint manufac-
turers instructions for belt routing.3. Pull on the shoulder belt until all of the belt
is fully extended and a click is heard. At thistime, the belt retractor is in the automaticlocking mode (child restraint mode). (It willrevert back to emergency locking whenthe belt is fully retracted.)
4. Allow the belt to retract. A clicking soundwill be heard as the belt retracts. This
indicates that the retractor is in the auto-matic locking mode. Pull down on the belt toremove any slack in the belt.
straint, use force to tilt the child restraintfrom side to side, and tug it forward to makesure that it is securely held in place.
6. Check that the retractor is in the automaticlocking mode by trying to pull more belt out
of the retractor. If you cannot pull any morebelt webbing out of the retractor, the belt isin the automatic locking mode.
7. Check to make sure that the child restraintis properly secured prior to each use. If thelap belt is not locked, repeat steps 3through 6.
After the child restraint is removed and theseat belt is allowed to wind back into theretractor, the automatic locking mode (child
restraint mode) is canceled; the seat belt maybe used as normal and will only lock during asudden stop or impact.
Tilt operation
Push the lock lever and while holdinthe steering wheel up or down to thposition.
Push the lock lever back into place tsteering wheel in place.
Do not adjust the steering whe
driving.
PD1336
2-35
OUTSIDE MIRROR REMOTECONTROL
FOLDABLE OUTSIDE MIRRORS INSIDE MIRROR
8/6/2019 1996 Nissan Maxima
65/197
The outside mirror will operate only when the
ignition switch is in the ACC or ON position.Push the right or left end of the switch to selectthe right or left side mirror, then adjust usingthe control lever.
Objects viewed in the outside mirror on thepassenger side are closer than they ap-pear.
Push the outside mirror backward to fold it. The night position will reduce glare
headlights of vehicles behind you a
Use the night position only when
sary, because it reduces re
clarity.
SPA0112 MPA0008
2-36
3 Heater, air conditioner and audio system
8/6/2019 1996 Nissan Maxima
66/197
Ventilator ................................................................... 3-2
Heater and air conditioner......................................... 3-3
Automatic air conditioner .......................................... 3-9
Radio ....................................................................... 3-11
Antenna ................................................................... 3-22
CB radio or car phone ............................................ 3-23
VENTILATOR
8/6/2019 1996 Nissan Maxima
67/197
Open or close, and adjust the air flow directionof ventilators.
SAA0040 SAA0041
3-2
ON position (Indicator light ON)
I t i i i i l t d i id th
HEATER AND AIR CONDITIONER
8/6/2019 1996 Nissan Maxima
68/197
CONTROLS
Fan control dial
This dial turns the fan on and off, and controlsfan speed.
Air flow control buttons
These buttons allow you to select the air flowoutlets.
Temperature control lever
This lever allows you to adjust the temperatureof the outlet air.
Air recirculation button
OFF position
Outside air is drawn into the passenger com-partment.
Use this position for normal heater, or airconditioner operation.
Interior air is recirculated inside the
Push the air recirculation button toposition when driving on a dusty ravoid traffic fumes and for maximuwhen using the air conditioner.
Do not use the recirculation m
long periods as it may cause the
air to become stale and the win
fog up.SAA0042A
3-3
Air conditioning button HEATER OPERATION 4. Move the temperature control ledesired position.
8/6/2019 1996 Nissan Maxima
69/197
This button is provided only for vehicles withair conditioner.
Start the engine, move the fan control dial tothe desired (1 to 4) position and push the airconditioning button to turn on the air condi-
tioner. The indicator light will come on whenthe air conditioner is on. To stop the air con-ditioner, push the switch again to return it tothe original position.
The air conditioner cooling function oper-ates only when the engine is running.
Positioning of the heating or air condi-tioning controls should not be done
while driving, in order that full attention
may be given to the driving operation.
Heating
This mode is used to direct hot air from thefloor outlets. Some air will also come from thedefrost vents.
1. Push the air recirculation button to theOFF position for normal heating.
2. Push the button in.
3. Turn on the fan control dial.
4. Move the temperature control lever to thedesired position between the middle andthe HOT position.
For quick heating, move the air recirculation
button to the ON position. Be sure toreturn the air recirculation button to theOFF position for normal heating.
Ventilation
This mode directs outside air from the side andcenter vents.
1. Push the air recirculation button to theOFF position.
2. Push the button in.
3. Turn on the fan control dial.
p
Defrosting or defogging
This mode is used to defrost/defogdows.
1. Push the button in.2. Turn on the fan control dial.
3. Move the temperature control ledesired position between the mthe HOT position.
To quickly remove ice or fog windows, turn on the fan controland the temperature control leveHOT position.
When the switch is pushconditioner will automatically beto defog the windshield, and the alate mode will automatically be tu
Outside air is drawn into the pcompartment to improve the defoformance.
3-4
Bi-level heating
Thi d di t t id i f th id d
Operating tips
Cl d i f th i
AIR CONDITIONER OPERA
S h i h f
8/6/2019 1996 Nissan Maxima
70/197
This mode directs outside air from the side andcenter vents and hot air from the floor outlets.
1. Push the air recirculation button to theOFF position.
2. Push the button in.3. Turn on the fan control dial.
4. Normally move the temperature control le-ver to the midpoint between HOT andCOLD.
Heating and defogging
This mode heats the interior and defogs thewindshield.
1. Push the button in.
2. Turn on the fan control dial.
3. Move the temperature control lever to thedesired position between the middle andthe HOT position.
Clear snow and ice from the wiperblades and air inlet in front of the wind-shield. This will improve heater opera-tion.
When the switch is pushed, the air
recirculate mode will automatically beturned off.
Outside air is drawn into the passengercompartment to improve the defogging per-formance.
Start the engine, move the fan conthe desired (1 to 4) position and pusconditioning button to activate the tioner. When the air conditioner is oand dehumidifying functions will be
the heater operation.
The air conditioner cooling func
erates only when the engine is r
Cooling
This mode is used to cool and dehu
1. Push the air recirculation buttOFF position.
2. Push the button in.
3. Turn on the fan control dial.
4. Push on the air conditioning buindicator light will come on.
5. Move the temperature control le
desired position. For quick cooling when the out
perature is high, move the air rec
3-5
button to the ON position. Be sure toreturn the air recirculation button to the
conditioner will automatically be turned onto defog the windshield, and the air recircu-
AIR FLOW CHART
The chart below shows the switch
8/6/2019 1996 Nissan Maxima
71/197
OFF position for normal cooling.
Dehumidified heating
This mode is used to heat and dehumidify.
1. Push the air recirculation button to theOFF position.
2. Push the button in.
3. Turn on the fan control dial.
4. Push on the air conditioning button. Theindicator light will come on.
5. Move the temperature control lever to thedesired position.
Dehumidified defogging
This mode is used to defog the windows anddehumidify.
1. Push the button in.
2. Turn on the fan control dial.
3. Push on the air conditioning button. Theindicator light will come on.
4. Move the temperature control lever to thedesired position.
When the button is pushed, the air
late mode will automatically be turned off.
Outside air is drawn into the passenger com-partment to improve the defogging perfor-mance.
Operating tips Keep the windows and sun roof closed
while the air conditioner is in operation.
After parking in the sun, drive for two orthree minutes with the windows open tovent hot air from the passenger compart-ment. Then, close the windows. This willallow the air conditioner to cool the interiormore quickly.
The air conditioning system should beoperated for about ten minutes at leastonce a month. This helps prevent dam-age to the system due to lack of lubrica-tion.
If the coolant temperature gauge exceedsthe HOT position, turn the air conditioningoff. See If your vehicle overheats in the Incase of emergency section for additionalinformation.
The chart below shows the switch positions for MAXIMUM and QUICcooling or defrosting.
The air recirculation switch shothe OFF position for normal
heating and defrosting.
3-6
8/6/2019 1996 Nissan Maxima
72/197
SAA0058B
3-7
8/6/2019 1996 Nissan Maxima
73/197
SAA0060B
3-8
Heating (ECON mode)
The air conditioner does not activa
AUTOMATIC AIR CONDITIONER
8/6/2019 1996 Nissan Maxima
74/197
Start the engine and operate the controls toactivate the air conditioner.
The air conditioner cooling function oper-ates only when the engine is running.
Cooling and/or dehumidified heating(Auto mode)
This mode may be normally used all yearround as the system automatically works tokeep a constant temperature. Air flow distribu-tion and fan speed are also controlled auto-
matically.1. Push the AUTO button on. (AUTO will be
displayed.)
2. Push the temperature set button to set the desired tempera-ture.
Adjust the temperature set button to about75F (24C) for normal operation.
The temperature of the passenger compart-ment will be maintained automatically. Airflow distribution and fan speed are alsocontrolled automatically.
The air conditioner does not activayou need to heat only, use this mod
1. Push the ECON (ECONOMY) b(ECON will be displayed.)
2. Push the temperature se to set the desiredture.
The temperature of the passengement will be maintained automaflow distribution and fan speedcontrolled automatically.
Do not set the temperature loweoutside air temperature. Otherwis
tem may not work properly.
Not recommended if windows fo
Dehumidified defogging
1. Push t he DEF b utton indicator light on the button will c
2. Push the temperature se to set the desiredture.
To quickly remove ice or fog outside of the windows, push thfan control button and
SAA0043B
3-9
maximum position .
As soon as possible after the windshield is
The air recirculation button will not be acti-vated when the air conditioner is in DEFmode
Operating tips
When the engine coolant tempe
8/6/2019 1996 Nissan Maxima
75/197
pclean, push the AUTO button to return tothe auto mode.
When the DEF button is pushed,the air conditioner will automatically be
turned on at outside temperatures above35F (2C) to defog the windshield, and theair recirculate mode will automatically beturned off.
Outside air is drawn into the passengercompartment to improve the defogging per-formance.
Manual fan speed control
Push the fan control button to manu-ally control the fan speed.
Push the AUTO button to return to auto