1_INNOKEG TRANSOMAT 3/1, 5/1, 6/1CLEANING AND FILLING TECHNOLOGY FOR STANDARD KEGS
IN THE MEDIUM-CAPACITY RANGE (UP TO 800 KEG/H) KEG PROCESSING
Requirements and Solutions
Cleaning and filling machine for the highest of
standards - for filling beer, wine, soft drinks, water
and juices.
As a stand-alone machine or for integration into
automatic keg lines for the medium- capacity
range of up to 800 kegs/hr, whereby installation
can be single- or dual-lane(Mono/Duo series) or in
groups.
Constant further development, the use of the most
modern and high-quality components as well as
the utilization of experience from the construction,
installation and maintenance of over 2,000 KHS
keg lines worldwide characterize the Transomat
series.
Key Features
The monitor control with simple operator
prompting enables direct access to all machine
components
·
Valve control via bus technology·
Hygienic Design: The specially manufactured
frame components are easy to clean and offer
zero potential for microbiological contamination
·
In the Duo design with space savings of up to
40%
·
Available with internal tanks or for connection to
an external tank system
·
All energy- and media-conducting connections
are installed on one side of the machine
·
Filling of non-refillable containers optionally
available (e.g. PETAINER Keg)
·
Standard Equipment
This machine is manufactured completely from
steel (1.4301 (304))
·
Upto 6 active cleaning stations, a soaking station
as well as a filling station
·
Siemens S7 control·
Filling via 2-orifice control (TPOC) or·
DFC® for the best filling results·
Format parts available for all common keg types·
Macrolon glazing·
Pneumatic-driven lifting bar·
2_INNOKEG TRANSOMAT 3/1, 5/1, 6/1CLEANING AND FILLING TECHNOLOGY FOR STANDARD KEGS
IN THE MEDIUM-CAPACITY RANGE (UP TO 800 KEG/H) KEG PROCESSING
Juchostraße 20D-44143 Dortmund
+49 (0) 231 / 5 69-0Phone:+49 (0) 231 / 5 69-1541Fax:[email protected]:
www.khs.com
Benefits
Pulsating spraying guarantees optimum cleaning
results
·
The use of a decentralized control and bus
system does away with the need for oversized
control cabinets on the machines
·
Faster filling, CO2 and product savings as well as
minimum O2 pickup thanks to the KHS Direct
Flow Control (DFC®) filling system
·
High flexibility of use and short changeover
times (e.g. thanks to format part changes with
no tools required)
·
Service
Service Worldwide service and fast spare
parts supply
·
Complete line design·
Turnkey projects worldwide·
Conversion, expansion and modernization
of existing keg lines
·
Options
Direct Flow Control (DFC®) - direct filling
control in place of indirect return gas
control
·
VISUKEG - complete system and production
data visualization
·
Remote maintenance system (ReDis)·
Automatic cleaning agent redosage and
conductometry
·
Combi-head for automatic change from
flat-type to well-type fitting (one-4-two)
·
Additional format parts for processing
special standard kegs (e.g. Smart Draft (R),
Easy Draft (R), Keggy (R) or PETainer (R))
·
Technical Data
Capacity Range
55 to 800 Kegs/hr; up to 100 Keg/hr with 50 l Kegs and DFC per line; up to 8 lines as group
Container Sizes
Volumes: 7l to 58l (1/2 bbl)
Diameter: 239 mm to 425 mm
Height: 320 mm to 610 mm
Machine data
Dimensions: 3500/4500/5000 mm (3/1, 5/1, 6/1) x 1000 mm x 2600 mm (LxWxH)
Conveyor height: 1,000 mm
Weight: approx. 650-950kg (depends on type, without container)
Noise Emissions
<85dBA
Power Supply
400 V; 50 Hz EU / 460 V; 60 Hz USA
Control
Siemens S7 (optional Allen Bradley/Rockwell or Mitsubishi)
Filling properties (beer with 50 l Keg and DFC)
Filling accuracy: +/-0,19% (+/-0,09 l)
O2 pickup: 0,0 to 0,05 ppm
CO2 loss: 0,0 to 0.1 g/l
Edition:9/14/15-en.Subjectto
modification.