M502.73 1
DEPARTMENT OF TECHNICAL EDUCATION ANDRA PRADESH.
Name : A.Venkateshwarlu , Designation : Lecture Branch : Mechanical Engg.Institute : Govt. polytechnic, HYDSubject : Design of machine elementsCode No : M-502Major Topic : FlywheelsDuration : 50 Mins.Sub Topic : IntroductionTeaching Aids : PPT, Photos, Animations and Diagrams
M502.73 2
FLY WHEEL
M502.73 3
Objectives
On completion of this period , you should be able to
Know
• What is Fly Wheel?
• Function of Fly Wheel
• Applications of Fly wheel
• Comparison between fly wheel and governor
M502.73 4
• A device which acts as a reservoir of energy.
• Absorbs energy when an excess energy is delivered
from engine / prime mover
• Releases the energy to meet the requirements of the
engine / machine load.
What is Fly Wheel?
M502.73 5
Fly Wheel in IC Engine
M502.73 6
Fly Wheel in a IC Engine
M502.73 7
Fly Wheel Used in Punching Machine
M502.73 8
Fly Wheel in Punching Machine
M502.73 9
Functions of Fly Wheel
• To Reduce the fluctuations of energy.
• To Supply the uniform flow of energy
• There by reduce the function of the prime mover or
machine
M502.73 10
Applications of fly wheel
• Used in Punching Press or Riveting machine
• Used in Steam engines (Reciprocating)
• Used in Internal Combustion engines
(Reciprocating)
M502.73 11
COMPARISON
FLYWHEEL• Reduce the Cyclic
variation of speed due to difference in input and out put.
• Action is continuous from cycle to cycle.
• Regulates the supply of energy during a cycle.
• No control over the quality of working fluid.
GOVERNOR• Maintain a constant speed
of Prime mover when the variation of speed is due to fluction of load.
• Action is Intermittent when load changes on engine.
• Regulates Input energy according to the Load from cycle to cycle.
• Changes the Quantity of the working fluid.
M502.73 12
Frequently Asked Questions
• Explain the function of Fly Wheel?
• Compare Fly Wheel and Governor.
• State the applications of Flywheel.
M502.73 13
Quiz
• Fly wheel is used to
a) Reduce the speed of engine during a cycle
b) Decrease the speed of the engine during a cycle
c) Maintain the speed of the engine constant with in the cycle
d) Can not control the speed of the engine