Product description:
1)Adopting advanced inverter technique and excellent imported capacity equipment,high working efficiency,small in size and light in weight
2)Adopting pulse width technique
3)Protection equipment are set internally to prevent over heat,over current,lack of voltage etc. to ensure safety operation
4)Unique design of output characteristic,suitable for wire-added welding and esthetic welding seam
5)Soft magnetic ferrite material are used in high frequency tranformer,which is small wastage, high conversion rate, high effficiency and energy-saving
6)Simple stucture,excellent technics,durability,reliablity and easy maintenance
7)Ideal equipment to weld stainless steel,carbon steel,pure copper(red copper)
8)Usable electrode: Acidic,alkalesent,cellulose
9)Adopting passive power factor correction,and high in power factor
10)Protection equipment are set to prevent input power lack of phase,lack of voltage and over voltage and strong practicability
Model ARC-160 ARC-200 ARC-250 ARC-300 ARC-400
Input power
voltage (V)AC-220±10﹪ AC-220±10﹪ AC-380±10﹪ AC-380±10﹪ AC-380±10﹪
Frequency (Hz) 50/60 50/60 50/60 50/60 50/60
Rated input
current (A)33 43 14.4 18.5 27.6
No-load voltage 56V 56V 54V 68V 60V
Current adjusting
voltage (A)20-160 20-200 20-250 20-300 20-400
Rated output
voltage (V)26.4 28 30 32 36
Duty cycle (%) 60﹪ 60﹪ 60﹪ 60﹪ 60﹪No-load power <100W <100W <100W <100W <100W
Efficiency (%) 80﹪ 80﹪ 85﹪ 85﹪ 85﹪Power factor 0.73 0.73 0.93 0.93 0.93
Insulation class F F F F F
Case protection
degreeIP21 IP21 IP21 IP21 IP21
Weight (kg) 8 9 19 20 27
Overall dimension
(mm)375*155*232 375*155*232 480*204*303 480*204*303 565*306*432
Model M150 M220
Input power
voltage (V)AC-220±10﹪ AC-220±10﹪
Frequency (Hz) 50/60 50/60
Rated input
current (A)30 40
No-load voltage 56V 56V
Current adjusting
voltage (A)30-150 20-220
Rated output
coltage (V)26.4 28
2.MINI MMA(ARC/ZX7)SERIES INVERTER MANUAL WELDER
1.MMA(ARC/ZX7)SERIES INVERTER MANUAL WELDER
Duty cycle (%) 15﹪ 15﹪No-load power <100W <100W
Efficiency (%) 85﹪ 85﹪Power factor 0.93 0.93
Insulation class F F
Case protection
degreeIP21 IP21
Weight (kg) 2.5 3
Overall dimension
(mm)250*100*170 300*112*175
Product description:
1) Adopting advanced inverter technique and excellent imported raw material, high working efficiency,small in size and light in weight
2) High frequency pressurization arc starting and pulse heat arc starting design which is easy for arc starting,wide range for current
adjusting and surperior of cost performance
3) Protection equipment are set internally to prevent over heat,over current,lack of voltage etc. to ensure safety operation
4) Unique design of output characteristic,suitable for wire-added welding and esthetic welding seam
5) Strong adaptability to grid,high duty cycle and suitable for continuous working of factory
6) Simple stucture,excellent technics,durability,reliablity and easy maintenance
7) Ideal equipment to weld stainless steel,carbon steel,pure copper(red copper) etc.
8) One machine serves serval purposes and stable performance,high effficiency and energy-saving,high effficiency and energy-saving
9) Adopting passive power factor correction,and high in power factor
Model TIG-160S TIG-200S TIG-250S
Input power
voltage (V)AC-220±10﹪ AC-220±10﹪ AC-220±10﹪
Frequency (Hz) 50/60 50/60 50/60
Rated input
current (A)20 27 38.9
No-load voltage 42V 42V 42V
Current adjusting
range (A)10-160 10-200 10-250
Rated output
voltage (V)16.4 18 20
Duty cycle (%) 60﹪ 60﹪ 60﹪No-load power <100W <100W <100W
Arc starting HF HF HF
Efficiency (%) 80﹪ 80﹪ 85﹪Power factor 0.73 0.73 0.73
Insulation class F F F
Case protection
degreeIP21 IP21 IP21
Weight (kg) 8 9 19
Overall dimension
(mm)375*155*232 375*155*232 375*155*232
Product description:
1) Adopting advanced inverter technique and excellent imported raw material, high working efficiency,small in size and light in weight
3.TIG INVERTER ARGON ARC WELDER
4.WS INVERTER TIG/MMA WELDER
2) High frequency pressurization arc starting and pulse heat arc starting design which is easy for arc starting,wide range for current
adjusting and surperior of cost performance
3) Protection equipment are set internally to prevent over heat,over current,lack of voltage etc. to ensure safety operation
4) Unique design of output characteristic,suitable for wire-added welding and esthetic welding seam
5) Strong adaptability to grid,high duty cycle and suitable for continuous working of factory
6) Simple stucture,excellent technics,durability,reliablity and easy maintenance
7) Ideal equipment to weld stainless steel,carbon steel,pure copper(red copper) etc.
8) One machine serves serval purposes and stable performance,high effficiency and energy-saving,high effficiency and energy-saving
9) Adopting passive power factor correction,and high in power factor
Model WS-160 WS-200 WS-250
Input power
voltage (V)AC-220±10﹪ AC-220±10﹪ AC-380±10﹪
Frequency (Hz) 50/60 50/60 50/60
Rated input
current MMA/TIG33/20 43/28 14.4/9.6
No-load voltage 56V 56V 54V
Current adjusting
range (A)10-160 10-200 10-250
Rated output
voltage MMA/TIG
(V)
26.4/16.4 28/18 30/20
Duty cycle (%) 60﹪ 60﹪ 60﹪No-load power <100W <100W <100W
Arc starting HF HF HF
Efficiency (%) 80﹪ 80﹪ 85﹪Power factor 0.73 0.73 0.93
Insulation class F F F
Case protection
degreeIP21 IP21 IP21
Weight (kg) 8 9 19
Overall dimension
(mm)375*155*232 375*155*232 480*204*303
Model M250TIGZX7-
260TIGInput power
voltage (V)AC-220±10﹪ AC-380±10﹪
Frequency (Hz) 50/60 50/60
Rated input
current MMA/TIG43/28 14.4/9.6
No-load voltage 56V 54V
Current adjusting
range (A)10-250 10-260
Rated output
voltage MMA/TIG
(V)
28/18 30/20
Duty cycle (%) 45﹪ 45﹪No-load power <100W <100W
Arc starting HF HF
Efficiency (%) 80﹪ 85﹪Power factor 0.73 0.93
Insulation class F F
Case protection
degreeIP21 IP21
Weight (kg) 5 8
Overall dimension
(mm)370*152*230 460*200*305
Product description:
1、Stable current
2、Stable arc starting as current from small to large
3、Movable iron core transformer ,simple structure,easy maintenance
4、Adopting plate-type winding way,fast heat elimination,good insulation,high efficiency and long time working life
5、Adopting special processing technic between movable iron core and rail,low working noises and durable
6、After pickling, parkerizing,powder coat,paint coating the case of machine,which provides the case firm,anticorrosion and no shed
Model BX1-210 BX1-250 BX1-315 BX1-400 BX1-500Input power
voltage (V)
Frequency (Hz)
Phase
Nonloaded
voltage (V)65 70 70 75 75
Rated output
current (A)200 250 315 400 500
Current adjusting
range (A)40-200 50-250 60-315 80-400 100-500
Rated duty cycle
(%)60 60 60 60 60
Rated input
capacity (KVA)15.2 19.8 21 32.5 42
Insulation class F F F F F
Cooling method
Overall dimension
(mm)460×410×590
540×410×
590590×440×690 590×440×690 640×490×700
Weight (kg) 60 65 85 90 135
Product description:
1.Fan-cooled,Thermal protection.
2.Stepless regulation of welding current.
3.Aluminum coiled transformer,economical for amateur & family use.
MODEL BX1-130C BX1-160C BX1-180C BX1-200C BX1-250C
Input Voltage(v)
Phase
Frequency(Hz)
230 230V/400V
6.BX1-C BASED EXPORT-ORIENTED WELDER
50/60
single phase
50
Single phase
Forced air-cooling
380V
5.BX1 SERIES AC ARC WELDER
Rated Input
Capacity(KVA)5 6.2 7 7.5 10
Max No-load
Voltage(V)
Current Range(A) 55-130 55-160 60-180 60-200 75-240
Rated Duty Cycle
Usable
Electrode(mm)2.0-3.2 2.0-4.0 2.5-4.0 2.5-4.0 2.5-5.0
Cooling method
Insulation Class
Protection
DegreeDimension(mm)
Weight(kg) 15 16.5 19.5 21 24.5
Product description:
1.Adopts tap transformer,forced air cooling structure.
2.Suitable for welding small workpieces.
3.220V/380V input connection,with switch to adjust output voltage,easy to operate and adjust.
4.Suitable for welding low carbon steel,low alloy steel structure.
5.Compact,light,portable,suitable for industrial usage.
MODEL BX6-160C BX6-180C BX6-200C BX6-250C BX6-300C Input Voltage(v)
Phase
Frequency(Hz)
No-load
Voltage(V)
Current Range(A) 50-160 55-180 60-200 70-250 75-300
Rated Duty Cycle
Usable
Electrode(mm)2.0-3.2 2.0-4.0 2.5-4.0 2.5-4.0 2.5-5.0
Cooling method
Insulation Class
Protection
Degree
Dimension(mm)
Weight(kg) 17 18.5 19.5 21 24.5
8.ZXE1 SERIES AC/DC ARC WELDER
Forced air-cooling
530X410X220
490x260x300
Forced air-cooling
220V/380V
50/60
55V
20%
F
7.BX6 SERIES PORTABLE WELDER(STAINLESS STEEL)
single phase
48V
10%
H
IP21S
IP21S
Product description:
1、Combined with movable iron core arc welding transformer,recifier subassembly and filter reactor,simple structure and durable
2、Suitable for acid and alkaline coated electrode
3、Convenient fixing and moving with lifting ring and roller wheel
4、After pickling, parkerizing,powder coat,paint coating the case of machine,which provides the case firm,anticorrosion and no shed
Model ZXE1-315 ZXE1-400 ZXE1-500 ZXE1-630
Input power
voltage (V)
Frequency (Hz)
AC Rated welding
current (A)315 400 500 630
DC Rated
welding current270 350 420 500
AC Current
adjusting range60-315 70-400 95-500 120-600
DC Current
adjusting range40-270 60-350 80-420 90-500
Rated duty cycle
(%)60 60 60 60
No-load voltage 80/70 80/70 82/75 85/80
Rated input
capacity (KVA)22 30 38 45
Insulation class F F F F
Overall dimension
(mm)750×500×830
750×500×
830750×500×830 750×500×830
Weight (kg) 100 110 120 130
9.BX6 SERIES AC ARC WELDERProduct description:
Model BX6-160 BX6-200 BX6-250 BX6-300 BX6-400
Rated output
current(A)160 200 250 315 400
Power voltage(V) 220/380 220/380 220/380 220/380 220/380
Rated duty
cycle(%)20 20 20 20 20
Rated input
capacity(KVA)8 13.2 16.5 19.8 28.6
Current
adjustable60-160 60-200 80-250 90-300 90-400
Insulation grade F F F F F
No-load
voltage(V)54 55 55 60 60
Weight(KG) 29 30 38 40 45
Measurement(MM
)540x360x570 540x360x570 570x380x590 570x380x590 570x380x590
1.Use a new style transformer and a unique box structure, light, compact and easy to be moved.
2.Fitted with a handle and foot wheels for a better movement.
3.Weldable materials; low-carbon steel,high-strength steel, medium-carbon steel,low-alloy steel.
Single phase,380V
50
Usable
electrode(MM)1.6~4 2.5~4 2.5~5 2.5~6 2.5~8
10.WELDING&CUTTING OUTFIT
1) Oxygen regulator: 1 set 1) Oxygen regulator: 1 set2) Acetylene regulator: 1 set 2) Acetylene regulator: 1 set3) Cutting attachment: 1 piece 3) Cutting attachment: 1 piece4) Cutting handle: 1 piece 4) Cutting handle: 1 piece5) Cutting nozzle 6290-2: 1 piece 5) Cutting nozzle 6290-2: 1 piece 6) Heating nozzle and pipe: 1 set 6) Welding pipe 1#, 2#, 3#: 3 pieces7) Welding pipe 1#, 2#, 3#: 3 pieces 7) Tip cleaner: 1 piece8) Tip cleaner: 1 piece 8) Mixer: 1 piece9) Mixer: 1 piece 9) Welding goggle: 1 piece10) Welding goggle: 1 piece 10) Spark lighter: 1 piece11) Spark lighter: 1 piece 11) 4.50m twin color gas rubber hose with connector: 1 set12) 4.50m twin color gas rubber hose with connector: 1 set
1 set/plastic box,4 sets/carton 1 set/plastic box,4 sets/carton
Carton dimensions: 50 x 43 x 38cm Carton dimensions: 50 x 43 x 38cm
N.W.: 30kg N.W.: 30kg
G.W.: 32kg G.W.: 32kg
1.Handle Material-nylon/fiber glass
2.upper jaw:brass coating/brass forging/iron
3.under jaw:brass forging/brass coating
4.Amperage capacity:300A,400A,500A,600A
5.Pakage: 1 pcs/opp bag then put in a color box ,30-50pcs/carton 。
Model: Welding&Cutting kit LD-802 Model: Welding&Cutting kit LD-801
Price:FOB Ningbo or Shanghai USD61.7/PC Price:FOB Ningbo or Shanghai USD59.5/PC
11.ELECTRODE HOLDER
LDHJ-2001B German type
300A-500A
Quantity:50Pcs/Ctn
Size:46*36*25Cm
Price:USD 2.12/pcs FOB Ningbo
600A-800A
Quantity:50Pcs/Ctn
Size:46*40*27Cm
Price:USD2.28/pcs FOB Ningbo
LDHJ-2001C Korea type
300A
Quantity:50Pcs/Ctn
Size:46*38*25Cm
Price:USD 1.92/pcs FOB
Ningbo
500A
Quantity:50Pcs/Ctn
Size:46*38*27Cm
Price:USD 2.28/pcs FOB
Ningbo
LDHJ-2001D American type
300A
Quantity:25Pcs/Ctn
Size:49*26*20Cm
Price:USD 2.56/pcs FOB
Ningbo
400A-500A
Quantity:50Pcs/Ctn
Size:55*34*23Cm
Price:USD 2.85/pcs FOB
Ningbo
LDHJ-2001E Dutch type
300A
Quantity:25Pcs/Ctn
Size:41*24*21Cm
Price:RMB 2.23/pcs FOB Ningbo
500A
Quantity:25Pcs/Ctn
Size:43*27*23Cm
Price:USD 2.54/pcs FOB Ningbo
LDHJ-2001F Japanese type
300A
Quantity:50Pcs/Ctn
Size:46*38*25Cm
Price:RMB 2.62/pcs FOB
Ningbo
500A
Quantity:50Pcs/Ctn
Size:46*38*27Cm
Price:USD 2.78/pcs FOB
Ningbo
LDHJ-2001G Italian Type
500A
Quantity:50Pcs/Ctn
Size:46*38*27Cm
Price:2.85/pcs FOB Ningbo
600A
Quantity:50Pcs/Ctn
Size:46*38*27Cm
Price: USD3.15/pcs FOB
Ningbo
1)Adopting advanced inverter technique and excellent imported capacity equipment,high working efficiency,small in size and light in weight
3)Protection equipment are set internally to prevent over heat,over current,lack of voltage etc. to ensure safety operation
5)Soft magnetic ferrite material are used in high frequency tranformer,which is small wastage, high conversion rate, high effficiency and energy-saving
10)Protection equipment are set to prevent input power lack of phase,lack of voltage and over voltage and strong practicability
1) Adopting advanced inverter technique and excellent imported raw material, high working efficiency,small in size and light in weight
2) High frequency pressurization arc starting and pulse heat arc starting design which is easy for arc starting,wide range for current
3) Protection equipment are set internally to prevent over heat,over current,lack of voltage etc. to ensure safety operation
8) One machine serves serval purposes and stable performance,high effficiency and energy-saving,high effficiency and energy-saving
1) Adopting advanced inverter technique and excellent imported raw material, high working efficiency,small in size and light in weight
2) High frequency pressurization arc starting and pulse heat arc starting design which is easy for arc starting,wide range for current
3) Protection equipment are set internally to prevent over heat,over current,lack of voltage etc. to ensure safety operation
8) One machine serves serval purposes and stable performance,high effficiency and energy-saving,high effficiency and energy-saving
Adopting plate-type winding way,fast heat elimination,good insulation,high efficiency and long time working life
Adopting special processing technic between movable iron core and rail,low working noises and durable
After pickling, parkerizing,powder coat,paint coating the case of machine,which provides the case firm,anticorrosion and no shed
BX1-630
76/80
630
125-630
60
50
F
640×490×
700
145
Combined with movable iron core arc welding transformer,recifier subassembly and filter reactor,simple structure and durable
After pickling, parkerizing,powder coat,paint coating the case of machine,which provides the case firm,anticorrosion and no shed
BX6-500
500
220/380
20
38
100-500
F
60
51
570x380x590
2.5~8
2) Acetylene regulator: 1 set3) Cutting attachment: 1 piece
5) Cutting nozzle 6290-2: 1 piece 6) Welding pipe 1#, 2#, 3#: 3 pieces
11) 4.50m twin color gas rubber hose with connector: 1 set
1 set/plastic box,4 sets/carton
Carton dimensions: 50 x 43 x 38cm
Model: Welding&Cutting kit LD-801
Price:FOB Ningbo or Shanghai USD59.5/PC