One . Copy the contents of the archive to the SD card of 32 GB .

The map should be as soon as possible , more than 10 hours. Format the card on

Windows , the FAT32 standard size group .

Fit or not - depends on the manufacturer of integrity, although some write that the card is

32GB but really break a lot menshe.Tak card look "right " .

On the SD card root files and folders should be located as follows :

Bentley - Director

MMI3G - file

MMI3GP - file

pkgdb - file

VW - file

build1 - file

config.nfm - file

DBInfo.txt - file

metainfo2.txt - file

Two . Insert the SD card in the MMI 3G and call the update menu .

Simultaneously press and hold Back + Setup ( 6-7 seconds) until the display

Three . Choose Update , see the following

April . Choose SD1 or SD2 ( despite what you have entered card slot ) . See this screen

Before flashed on the screen with messages like " Source Analysis " .

May . Select only the " ECE 6.17.3 ( MMI3G ) " . Further reading meta information

6. Selectai "Standard"

July . See a list of installed devices , ,

leaves by the following

to the point of " Start download "

8. August . Select it and reiterate our desire to install the card by selecting "Start"

9.. September . MMI says that she wants to restart.

Do nothing , just wait.

10 . Went update process lasting 2.5 hours

11. After long minutes of waiting MMI overloaded (such as , this time I lost , unfortunately ) , and displays the following screen

Moves down along the way well see two points

Starting further down

" and select " Continue"

12. On the next screen , select the " Abort documentary "

MMI again says that you must restart . And overloaded , we can not prevent

13 . Then , the normal load is included radio or jukebox music or navigation displays .

But after a few minutes you Nate

This means that it is necessary to activate the card.

May. Activation maps.

There are two ways to activate the card and both work.

One. Correctly by activator.

Thank you for activating djdeniska. Verified to be working.

It is here http://yadi.sk/d/GwuOZhoc6L6dg (Map MMI 3G activation file djdeniska.zip

2014). And somewhere in the Audi-Club.ru

The procedure is almost the same as when you install the card.

Copy the activator card and inserted into MMI.

Get updates via return + Setup menu and repeat, when you install

1. 2. 3.

4. 5. 6.

7. 8. 9.