Date post: | 10-Aug-2018 |
Category: |
Documents |
Upload: | vuongtuyen |
View: | 213 times |
Download: | 0 times |
. .
Wi-Fi Key:
OBD HOSTPOWER Wi-FiOBD H Wi-Fi
LOCK
ACC ONSTART
‘POWER’ LED will turn ON, and the white ‘Wi-Fi’ LED will emit a � ash every 3 seconds.
– LEDs are o� ? Check vehicle for blown fuses.
Vehicles with push button start: press the button without stepping on the brake pedal.
iOS Quick Start GuideOBDLink MX Wi-Fi
iOS
2
1
4Scan the QR code or visit the URL from your iOS device to download the OBDLink app:
The factory default Wi-Fi Key is found on the bottom of the unit. It is lowercase and includes periods.
obdlink.com/app
Download & install OBDLink appTurn ignition to Key On, Engine O� position
Write down the 14-digit Wi-Fi Key
[instructions continue on reverse ]
The DLC is usually found on the driver’s side, under the dash.
– Can’t � nd your DLC? Visit dlc-locator.com
3 Plug MX Wi-Fi into the diagnostic link connector (DLC) 5 Open ‘Settings’ app, and enable Wi-Fi
Thank you for your purchase!
If you like OBDLink MX Wi-Fi,please post your review on
OBD HOSTPOWER Wi-Fi
8 Launch the OBDLink app, and tap ‘Connect’
Once the connection is established, the ‘Wi-Fi’ LED will turn on solid. Tap ‘Diagnostics’ to start a scan.
The ‘Wi-Fi’ LED will change to a slow blink.
– Remember that the Password is lowercase and includes periods.
A checkmark next to ‘OBDLink MX’ indicates a successful connection.
7 Enter the Wi-Fi Key from step #1 in the ‘Password’ � eld, and tap ‘Join’ – Need help? Go to obdlink.com/support
or scan the QR code
– For advanced configurations, go to obdlink.com/setup or scan the QR code
6 Select ‘OBDLink MX’ from the network list