HA
RD
WA
RE
BR
AC
KE
T B
AR
SP.
2
E-Z AdjustAblE Cross bAr SlipS Over 3/8 ipS pipe AdjuStS FrOm 4-1/2” tO 6-1/2” C. tO C.* b638
AdjustAblE CombinAtion brACkEt bArlength 4-3/16” SCrew hOleS 2-3/16”, 2-3/4”, 3-15/16” C. tO C.* tApped #8-32revOlveS 360 degreeS
grOund SCrew inSerted b639
Zinc Plated bracket bars
offsEt Cross bAr length 3-13/16” SlipS Over 3/8 ipS pipe SCrew hOleS 2-3/4” C. tO C.*tApped #8-32grOund SCrew inSerted
b644
long offsEt Cross bAr length 4-1/2”SlipS Over 3/8 ipS pipe inSide SCrew hOleS 2-3/4” C. tO C.*OutSide SCrew hOleS 3-1/2” C. tO C.*tApped #8-32grOund SCrew inSerted
b636
tAppEd brACkEt bArs length 3-7/8” grOund SCrew inSerted
B642 1/8 ipS Center hOle B643 1/4 ipS Center hOle B630 #8-32 Center hOle (nO SCrew)
*C. to C. is an abbreviation for Center to Center.
grEEn ground sCrEw tApped #8-32b628
Cup wAshErFOr grOund SCrew b629
4” univErsAl CirClE Cross bAr grOund SCrew inSerted b637
4” univerSAl CrOSS BAr b4635
brAss-plAtEd stEEl wing nut1/8IP-FdiAmeter 1-3/8”b1170
8-32” tAp hOleS:inSide - 2-3/4” C. tO C.*
8-32” tAp hOleS:OutSide - 3-9/16” C. tO C.*
8-32” tAp hOleS:3-1/2” C. tO C.*
HA
RD
WA
RE
BR
AC
KE
T B
AR
SP. 3
Zinc Plated bracket bars
Premium Cross Bars0.1150” ThiCkness
Premium Cross Bars.0845” ThiCkness
ZinC brACkEt bAr1/8-27 ipgrOund SCrew • wire tipS
b6400
ZinC brACkEt bAr3/8-18 ipgrOund SCrew • wire tipS
b6404
ZinC brACkEt bAr1/4-18 ipgrOund SCrew • wire tipS
b6402
unfinishEd brACkEt bAr1/8 ipgrOund SCrew & tipS
b6406
unfinishEd brACkEt bAr3/8 ipgrOund SCrew & tipS
b6410
unfinishEd brACkEt bAr1/4 ipgrOund SCrew & tipS
b6408
HA
RD
WA
RE
LO
CK
NU
TS
P. 4
solid brass knurled lock nuts
brAsstAp #8-32diAmeter 1/2” thiCkneSS 3/32” b1
brAsstAp 1/4”-20diAmeter 9/16” thiCkneSS 3/32” b16
brAsstAp 1/4”-27diAmeter 9/16” thiCkneSS 3/32” b14
brAsstAp 1/4”-27diAmeter 3/4” thiCkneSS 3/32” b13
brAss1/4 ipSdiAmeter 3/4” thiCkneSS 3/32” b12
brAss1/8 ipSdiAmeter 3/4” thiCkneSS 1/8” b190
brAss1/8 ipSdiAmeter 3/4” thiCkneSS 3/32” B10 unFiniShed B4 BurniShed & lACquered
B11 niCkel plAted
brAss1/8 ipS diAmeter 9/16” thiCkneSS 1/8” B8 unFiniShed
B9 niCkel plAted
B1108 BurniShed & lACquered
smooth EdgEbrAssdiAmeter 3/4” thiCkneSS 1/8” B2 1/8 ipSB3 1/4 ipS
brAss3/8 ipSdiAmeter 1” thiCkneSS 1/8” b199
brAss1/4 ipSdiAmeter 1” thiCkneSS 1/8” b198
brAss1/8 ipSdiAmeter 1” thiCkneSS 1/8” b195
brAss1/4 ipSdiAmeter 3/4” thiCkneSS 1/8” b191
Brass hexagon LoCk nuTs
brAss1/8 ipSdiAmeter 1/2” thiCkneSS 3/32” b5
brAssdiAmeter 7/16” thiCkneSS 1/8”
tAp 5/16”-27 b15tAp 1/4”-27 b30
brAss1/8 ipSdiAmeter 9/16” thiCkneSS 7/32” b1126
smooTh round Brass LoCk nuTs
bEAdEd roundbrAss loCk nut1/4 ipSdiAmeter 23/32” thiCkneSS 5/32” b1120
bEAdEd roundbrAss loCk nut1/8 ipSdiAmeter 9/16” thiCkneSS 5/32” B6 unFiniShed
B7 BurniShed & lACquered
B1106 niCkel plAted
brAss1/4 ipSdiAmeter 11/16” thiCkneSS 3/16” b1132
brAss3/8 ipSdiAmeter 7/8” thiCkneSS 7/32” b1134
HA
RD
WA
RE
NO
TS
AN
D W
AS
HE
RS
P. 5steel lock nuts & lock washers
sTamPed sTeeL PaLnuTs sTeeL LoCk nuTs
wAshEr typEdiAmeter 7/8” depth 1/8” 1/8 ipSB36 Steel
B37 ZinC plAted
B38 BrASS plAted
rEgulAr stEEl pAlnutdiAmeter 3/4” thiCkneSS 1/8” B34 1/8 ipSB35 1/4 ipS
stEEl loCk nut with loCk wAshErdiAmeter 5/16” thiCkneSS 5/32” tAp #8-32B1135 ZinC plAted
stEEl loCk nut diAmeter 5/16” thiCkneSS 3/32” tAp #8-32B22 ZinC plAted
B5022 BrASS plAted
key PaCks aresoLd in a
100 PieCe Bag onLy.no Broken PaCks.
sTeeL hexagon LoCk nuTs
hEAvy stEEl nutdiAmeter 9/16” thiCkneSS 7/32” 1/8 ipSB26 Steel
B31 BrASS plAted
B32 niCkel plAted B1126 SOlid BrASS
diAmeter 9/16” thiCkneSS 1/8” 1/8 ipSB19 Steel
B33 ZinC plAted
diAmeter 1/2” thiCkneSS 1/8” 1/8 ipSB24 Steel
B25 BrASS plAted
diAmeter 1-1/8” thiCkneSS 7/32” 1/2 ipSB28 ZinC plAted
B5029 BrASS plAted
diAmeter 7/8” thiCkneSS 1/8” 3/8 ipSB21 ZinC plAted
hEAvy stEEl nutdiAmeter 11/16” thiCkneSS 1/4” 1/4 ipSB23 ZinC plAted
diAmeter 11/16” thiCkneSS 1/8” 1/4 ipSB20 Steel B1100 ZinC plAted
miLLed sTeeL hexagon LoCk nuTs – miLLed From Bar sToCk(milled Steel hex nutS Are StrOnger BeCAuSe they Are milled FrOm SOlid Steel BAr.)
diAmeter 7/8” thiCkneSS 1/8” 3/8 ipSb27
diAmeter 11/16” thiCkneSS 1/8” 1/4 ipSb18
diAmeter 9/16” thiCkneSS 1/8” 1/8 ipSb17
HA
RD
WA
RE
WA
SH
ER
SP.
6lock washers
stEEl shAkE proofloCk wAshErSlip #8-32 B399 unFiniShed
stEEl EXtErnAl sproCkEt lOCk wASher
Slip 1/8 ipS B1102 ZinC plAted
Slip 1/4 ipS B5040 unFiniShed
stEElsplit typE loCk wAshErSlip 1/8 ipS B404 unFiniShed
Slip 1/4 ipS B5010 unFiniShed
hEAvy stEEl shAkE proofloCk wAshErSlip 1/8 ipSB1130 ZinC plAted
B3819 phOSphOr BrOnZe
stEEl shAkE proofloCk wAshErSlip 1/8 ipSB401 BlACk Oxide
B403 BrASS plAted
B1401 phOSphOr BrOnZe
stEEl shAkE proofloCk wAshErSlip 1/4”B400 unFiniShed
stEEl loCk wAshErshAkE proofSlip 3/8 ipSB406 ZinC plAted
hEAvy stEEl loCk wAshErshAkE proofSlip 1/4 ipSB1230 ZinC plAted
stEElloCk wAshErshAkE proofSlip 1/4 ipSB402 ZinC plAted
B1225 SiliCOne BrOnZe
HA
RD
WA
RE
WA
SH
ER
SP. 7
washers
hEAvy stEEl wAshEr
thiCkneSS 1/16” Slip 1/8 ipSB1641 3/4”B1643 7/8”B410 1”B1642 1-1/4”B411 1-1/2”B1644 1-3/4”B414 2”B1645 2-1/2”B415 3”B417 4”
thiCkneSS 1/16” Slip 1/4 ipSB1646 1”B1647 1-1/2”
thiCkneSS 3/32” Slip 1/4 ipSB412 1-1/2”B413 2”B420 3”B423 4-3/8” (7 OZ.)
thiCkneSS 1/16” 1-5/8” Center hOle
FOr d87 SOCket
B1650 2 3/4”
rEgulAr stEEl wAshErdiAmeter 9/16” Slip #8-32BrASS plAted*b3760
rEgulAr stEEl wAshErdiAmeter 5/8” thiCkneSS 1/32” Slip 1/8 ipSBrASS plAted*b405
rEduCing wAshEr Slip 1/4 ipS tO Slip 1/8 ipSBrASS plAted*b152
stEEl wAshEr diAmeter 1”thiCkneSS 1/32”Slip 1/8 ipSB408 BrASS plAted* B409 unFiniShed
CLear PLasTiC WashersFOr CryStAl FixtureS
OutSide diAmeter 1-1/2”inSide diAmeter 29/32”thiCkneSS 1/16”b179
OutSide diAmeter 1-1/4”tOp SeAting AreA 7/8”Slip 1/8 ipSthiCkneSS 1/8”b178
rubbEr wAshErsthiCkneSS 1/16” Slip 1/8 ipSB425 3/4” white
B429 3/4” BlACk B422 7/8” white B426 1” white B419 1” BlACk
B427 1-1/4” white B421 1-1/4” BlACk B428 1-1/2” white
COrk wASherS
thiCkneSS 1/8”Slip 1/8 ipSB436 1”B438 1-1/2”
whitE fElt wAshErsthiCkneSS 1/16”Slip 1/8 ipSB430 3/4”B431 1”B432 1-1/4” B434 1-1/2”
HA
RD
WA
RE
RIN
GS
P. 8
check rings
sTamPed sTeeL CheCk rings
vACuum brAss plAtEd Slip 1/8 ipSB1729 1/2”B1730 5/8”B1731 3/4”B1732 7/8”B1733 1”B1734 1-1/8”B1735 1-1/4”B1736 1-3/8”B1737 1-1/2”B1739 2”
niCkEl plAtEdSlip 1/8 ipSB142 5/8”B143 3/4”B144 7/8”B145 1”B146 1-1/8”B147 1-1/4”B148 1-3/8”B149 1-1/2”
AntiquE brAss plAtEdSlip 1/8 ipSB160 1/2” B163 3/4”B164 7/8”B165 1”B166 1-1/8”B167 1-1/4”B168 1-3/8”B169 1-1/2”
brAss plAtEd* Slip 1/8 ipSB131 1/2”B132 5/8”B133 3/4”B134 7/8”B135 1”B136 1-1/8”B137 1-1/4”B138 1-3/8”B139 1-1/2”B140 1-3/4”B141 2”
stAmpEd brAss ChECk ringsSlip 1/8 ipSBurniShed & lACquered B153 3/4”B154 7/8”B155 1”B156 1-1/8”B157 1-1/4”B158 1-3/8”B159 1-1/2”unFiniShed BrASS
B3831 3/4”B3832 7/8”B3833 1”B3834 1-1/4”B3835 1-1/2”
stAmpEd stEElbEAdEd ChECk ring brAss plAtEd* Slip 1/8 ipSB174 1-1/8”
stAmpEd stEElChECk rings brAss plAtEd*Slip 1/4 ipSB180 3/4”B181 1”B182 1-1/8”B183 1-1/4”B184 1-3/8”B185 1-1/2”B3799 2”
stAmpEd brAsssquArE ChECk ringSOlid BrASS
Slip 1/8 ipS unFiniShed
B1703 3/4”B3828 1”
MeasureMent shown is inside Lip diaMeter
*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL rather than shiny.
HA
RD
WA
RE
CH
EC
K A
ND
SL
IP R
ING
SP. 9
Cross-section
turned brass check & sliP rings
turnEd ChECk ringunfinishEd brAss Slip 1/4 ipSB122 5/8”B123 3/4”B124 7/8”B125 1”B126 1-1/8”B127 1-1/4”B128 1-3/8”B129 1-1/2”
turnEd ChECk ringburnishEd & lACquErEd Slip 1/4 ipSB1710 3/4”B1711 7/8”B1712 1”B1713 1-1/8”B1714 1-1/4”B1715 1-3/8”B1716 1-1/2”
turnEd ChECk ringunfinishEd brAssSlip 1/8 ipSB101 1/2”B102 5/8”B103 3/4”B104 7/8”B105 1”B106 1-1/8”B107 1-1/4”B130 1-5/16”B108 1-3/8”B109 1-1/2”B120 1-3/4”B121 2”
turnEd ChECk ringburnishEd & lACquErEd Slip 1/8 ipSB111 1/2”B112 5/8”B113 3/4”B114 7/8”B115 1”B116 1-1/8”B117 1-1/4”B118 1-3/8”B119 1-1/2”
turnEd doublE ChECk ring unfinishEd brAss SeAting BOth SideS Slip 1/4 ipSB1700 3/4” x 3/4”B1701 1” x 1”B1702 1-1/4” x 1-1/4”
1/8 ipS SlipS thrOugh A 7/16” diAmeter hOle
1/4 ipS SlipS thrOugh A 9/16” diAmeter hOle
Brass sLiP ringsSCrewS nOt inCluded – BrASS Slip ringS hAve A #8-32 tAp Side hOle.
3/8” slip ring SlipS 3/8” tuBing
B531 1/8 ipS
1/2” slip ring SlipS 1/2” tuBing
B532 1/4 ipS
3/4” slip ring SlipS 3/4” tuBing
b527
7/8” slip ring SlipS 7/8” tuBing
b528
1” slip ring SlipS 1” tuBing
b529
smAll stEEl hEAd sCrEw FOr Slip ringS #8-32 threAd
1/4” ShAnk
B457 BrASS plAted
MeasureMent shown is inside Lip diaMeter
HA
RD
WA
RE
RE
DU
CE
RS
AN
D N
IPP
LE
SP.
10
unfinished reducers & shoulder niPPles
brAssstud bushingdiAmeter 3/4”3/8F x 1/8Fb70
brAss shAdE rEst bushing1/8m x 1/4”-27Fb534
Aluminum bushing1/4”-27F • 1/2” ShOulder
preSS FitS 11/32” hOle
b3005
Brass shouLder niPPLes
brAss smAll hEAd flAngE nipplEhex heAd 7/16”inSide diAmeter 1/4”1/8m threAd length 7/16” b75
height 3/8”threAd length 5/32”On eACh Side
1/8m x 1/8mb74
height 1/2”5/16” threAd One Side 1/8” threAd Other Side
1/8m x 1/8mb82
Brass headLess reduCers
B52 1/4m x 1/8FB999 1/4m x 1/8F (1” lOng)
3/8m x 1/4Fb1000
(with SCrewdriver SlOt)B48 1/8m x 1/4”-27F
B990 1/8m x #6-32FB51 1/8m x #8-32FB49 1/8m x 1/4”-20FB50 1/8m x 1/4”-27F
Brass Cord inLeT Bushings
1/4m b71
1/8mb69
1/8mb68
Brass shouLder reduCers
B53 1/4”-27m x #8-32FB55 1/4”-27m x #4-36F
B41 1/8m x #8-32FB42 1/8m x #10-24FB40 1/8m x 1/4”-27FB39 1/8m x 1/4”-20FB43 1/8m x 5/16”-27F
1/4m x 1/8Fb44
B46 3/8m x 1/8FB45 3/8m x 1/4F
B47 1/2m x 3/8FB54 1/2m x 1/4FB10021/2m x 1/8F
aLL shown aCtuaL size
aLL referenCes to 1/8M, 1/8f, 1/4M, 1/4f, 3/8M, 3/8f are ips.
HA
RD
WA
RE
SC
RE
WS
P. 11solid brass screwsunFiniShed BrASS unleSS StAted OtherwiSe
solid brAsslArgE hEAd knurlEd sCrEw #8-32 threAd
heAd diAmeter 1/2” 3/8” ShAnk
b476
solid brAss thumbsCrEw #8-32 threAd
heAd diAmeter 3/8” 1/4” ShAnk
b475
solid brAss thumb sCrEw #8-32 threAd
heAd diAmeter 3/8” 3/8” ShAnk
b473
solid brAss knurlEd hEAd sCrEw#6-32 threAd
heAd diAmeter 1/4” B38203/8” ShAnk
B38211/2” ShAnk
solid brAssthumb sCrEw #8-32 threAd heAd diAmeter 3/8” B490 3/4” ShAnk
B491 1-1/2” ShAnk
solid brAssthumb sCrEw #8-32 threAd heAd diAmeter 3/8”
3/8” ShAnk
B4529unFiniShed
1/2” ShAnk
B1630unFiniShed
B1631BrASS plAted
B1633Antique FiniSh
solid brAssthumb sCrEw #8-32 threAd heAd diAmeter 3/8” 3/8” ShAnk
B488 unFiniShed
B1626Antique FiniSh
solid brAss knurlEd hEAd sCrEw#8-32 threAd
1/2” ShAnk
b474
solid brAssCross drillEd EyE lEt sCrEw #6-32 threAd
heAd diAmeter 5/32” 5/32” ShAnk
b479
brAss sCrEw 1/4” ShAnk #4-36 threAd b486
solid brAss bAll hEAd thumb sCrEw #8-32 threAd
heAd diAmeter 3/8” B45353/8” ShAnk
B477 1/2” ShAnk
B45383/4” ShAnk
sTeeL round head sCreWs#8-32 threAd
ZinC plAted
B38221 1/2”B443 2”
niCkel plAted
B449 1”B453 1-1/2”B454 2”
dull BlACk
B448 1”B455 1-1/2”B456 2”
Antique BrASS B445 1”B446 1-1/2”B447 2”
BrASS plAted B457 1/4”B458 3/8”B440 1/2”B441 3/4”B450 1”B451 1-1/2”B452 2”B459 3”
aLL iteMs shown aCtuaL size.aLL soLid brass sCrews on this page have no sLot, exCept for b486.
HA
RD
WA
RE
SC
RE
WS
P. 1
2steel screws
stEEl Cup wAshEr for ground sCrEw Slip #8-32b629
stEEl ground sCrEw1/4” ShAnk
#8-32 threAd
B628 green
stEEl finiAl sCrEw 1/2” ShAnk
1/4”-27 threAd
B470 BrASS plAted
sTeeL knurLed head sCreWs For shade hoLders
stEEl thumb sCrEws3/4” ShAnk #8-32 threAd
B464 BrASS plAted B465 niCkel plAted B466 BlACk B467 Antique BrASS
stEEl thumb sCrEws1/2” ShAnk
#8-32 threAd B460 BrASS plAted B461 niCkel plAted B462 BlACk B463 Antique BrASS
#6-32 threAd
B472 BrASS plAted
B3823 Antique BrASS
stEEl thumb sCrEws3/8” ShAnk
#8-32 threAd
B468 BrASS plAted
B469 Antique BrASS
stEEl rosEttE hEAd sCrEw 3/8” ShAnk #6-32 threAd B485 BrASS plAted
stEElthumb sCrEws1/2” ShAnk
#5-40 threAd
B487 BrASS plAted
spECiAl smAll round hEAd stEEl CAnopy sCrEw 3/16” ShAnk
#8-32 threAd
B471 BrASS plAted
bAkEd ivoryovAl hEAd sCrEwFOr SwitCh plAteS
#6-32 threAd
b498
aLL brass pLated steeL sCrews are barreL pLated
HA
RD
WA
RE
NIP
PL
ES
P. 13niPPles
sTeeL Brass
ZinC plAtEd stEEl nipplEs
1/8 ipS All threAd
A10 3/8”A11 1/2”A12 5/8”A13 3/4”A14 7/8”A15 1”A16 1-1/8”A17 1-1/4”A18 1-3/8”A19 1-1/2”A20 1-5/8”A21 1-3/4”A23 2”A25 2-1/4”A27 2-1/2”
A29 2-3/4”A31 3”A33 3-1/4”A35 3-1/2”A37 3-3/4”A39 4”A40 4-1/4”A41 4-1/2”A42 4-3/4”A43 5”A44 5-1/4”A45 5-1/2”A47 6”A99 10”A302 30”A303 36”A304 48”
(nOt plAted)(nOt plAted)(nOt plAted)
solid brAss nipplEs
1/8 ipS All threAd
A1010 3/8”A1011 1/2”A1012 5/8”A1013 3/4”A1014 7/8”A1015 1”A1017 1-1/4”A1019 1-1/2”A1021 1-3/4”A1023 2”A1025 2-1/4”A1027 2-1/2”A1029 2-3/4”A1031 3”A1033 3-1/4”
A1035 3-1/2”A1037 3-3/4”A1039 4”A1040 4-1/4”A1041 4-1/2”A1042 4-3/4”A1043 5”A1047 6”A300 36”
1/4 ipS All threAd
A1113 1/2”A1115 1”A1119 1-1/2”
A1123 2”A1131 3”A310 36”
1/4 ipS All threAd
A50 1/2”A51 5/8”A53 3/4”A1644 7/8”A56 1”A58 1-1/4”A59 1-3/8”A60 1-1/2”A61 1-3/4”A64 2”
A65 2-1/4”A66 2-1/2”A67 2-3/4”A68 3”A69 3-1/2”A95 3-3/4”A96 4”A97 4-1/2”A1645 5”A306 36” (nOt plAted)
3/8 ipS All threAd
A1511 1/2”A1513 3/4”A1515 1”
A1519 1-1/2”A1523 2”A1527 3”
Brass shouLder niPPLes
1/8m x 1/8mlength 1/2”5/16” threAd One Side 1/8” threAd Other Side
b82
1/8m x 1/8mlength 3/8”5/32” threAd length On eACh Side
b74
hex niPPLes & CouPLings
brAss smAll hEAdflAngE nipplEhEX hEAd siZE 13/32”ShAnk 3/8” • OverAll 7/16” threAded 1/8 ipS mAle
SOlid BrASS
b75
stEEl hEX nipplEhEX hEAd siZE 1/2”ShAnk 3/8” • OverAll 1/2” threAded 1/8 ipS mAle
ZinC plAted
b830
stEEl hEX nipplEhEX hEAd siZE 17/32”ShAnk 1/2” • OverAll 5/8” threAded 1/8 ipS mAle ZinC plAted
b831
brAss hEX hEAd CouplinghEX hEAd siZE 1/2”unFiniShed BrASS
tAp 1/8 ipS All thrOugh
B1210 height 1/2”B1215 height 3/4” brAss lArgE hEAd
flAngE nipplEhEX hEAd siZE 15/32”threAded 1/8 ipS mAle
SOlid BrASS
B1856 5/16” ShAnk
B1858 7/16" ShAnk
HA
RD
WA
RE
ST
UD
S A
ND
PIP
ES
P. 1
4all-thread studs & PiPes
sTeeL aLL-Thread rods and sTuds
unFinished sTeeL and Brass aLL-Thread PiPe
REFERENCE GUIDE OF THREAD SIZES
#8-32 All-thrEAdrod And studsA1211 1/2”A1212 5/8”A1213 3/4”A1214 7/8”A1219 1-1/2”A1221 1-3/4”A1223 2”A1227 2-1/2”A1231 3”A1235 3-1/2”A74 24”
1/4”-20 All-thrEAdrod And studsA1613 3/4”A1615 1”A1619 1-1/2”A1623 2”A1627 2-1/2”A1631 3”A1635 3-1/2”A1639 4”A1641 4-1/2”
1/4”-27 All-thrEAdrod And studsA80 1/2”A81 1”A83 1-1/2”A84 2”A85 3”A79 24”
36” 1/8 ips All-thrEAd pipEA300 SOlid BrASS
A303 Steel
48” 1/8 ips All-thrEAd pipEA304 Steel
36” 5/16”-27 All-thrEAd pipEA301 SOlid BrASS
36” 3/8 ips All-thrEAd pipEA308 Steel A309 36” x 1/2 ipS
36” 1/4 ips All-thrEAd pipEA306 Steel
A310 SOlid BrASS
48” 1/4 ips All-thrEAd pipEA307 Steel
#4-36 #6-32 #8-32 1/4”-20 1/4”-27 5/16”-27 1/8 ipS 1/4 ipS 3/8 ipS
3/32” 1/8” 5/32” 1/4” 1/4” 5/16” 3/8” 1/2” 5/8”
aLL rods, pipes and studs on this page are unfinished.
HA
RD
WA
RE
HIC
KE
YS
AN
D L
UG
SP. 15
steel hickeys & lugs
smAll stEEl hiCkEy height 9/16”Side hOle tApped #8-32 FOr grOund SCrew tOp & BOttOm tApped 1/8 ipSB619 Steel
B3825 SOlid BrASS
stAmpEd stEEl body hiCkEyheight 1”Side hOle tApped #8-32 FOr grOund SCrew tOp & BOttOm tApped ipSB601 1/8F x 1/8FB602 1/8F x 1/4FB604 1/8F x 3/8FB603 1/4F x 1/4FB605 1/4F x 3/8F
stEEl hiCkEyheight 1-1/2”Side hOle tApped #8-32 FOr grOund SCrew tOp & BOttOm tApped ipSB607 1/8F x 1/8FB608 1/8F x 1/4FB3609 1/4F x 1/4F
utility switCh hiCkEy height 1-1/4”3 hOleS tApped 1/8 ipSb620
mAllEAblE iron hiCkEy height 1-1/8”All hOleS tApped ipSB610 1/8F x 1/8FB609 1/8F x 1/4FB611 1/4F x 1/4FB615 1/4F x 3/8FB614 1/4F x 1/2FB612 3/8F x 3/8FB613 3/8F x 1/2FB616 1/2F x 1/2F
singlE stEm hiCkEyheight 1”SlipS 3/8 ipS x 3/8F ipSb622
fiXturE stud“CrOwS FOOt”mAlleABle irOn threAded 3/8 ipStAp 1/8 ipSmOunting hOleS SpACed 1-1/16” C. tO C. And Slip #8-32 b683
ZinC plAtEd lug with sEt sCrEwSlip 1/8 ipSb3729
ZinC plAtEd lugB3999 Slip #8-32B1780 Slip 1/8 ipS B1785 Slip 1/4 ipS
ZinC plAtEd lugwith 9” BAre COpper
grOund wire D2650 Slip 1/8 ipS lug D2655 Slip #8-32 lug
pin-up brACkEt bAr OverAll height 1-3/4” OFFSet 1/2”hOleS Slip 1/8 ipSb1012
aLL shown aCtuaL size
smAll brAss flAngE height 7/16” • width 1-1/4”mOunting hOleS 1” C. tO C.tAp 1/8 ipSb590
HA
RD
WA
RE
CO
UP
LIN
GS
P. 1
6brass couPlings
rEgulAr Coupling diAmeter 1/2” height 19/32” tAp 1/8 ipS All thrOugh
B900 unFiniShed BrASS B901 BurniShed & lACquered
bAll CouplingdiAmeter 5/8” height 7/16” tAp 1/8 ipS All thrOugh
B196 unFiniShed BrASS
bArrEl Coupling diAmeter 1/2” height 9/16” tAp 1/8 ipS All thrOugh
B902 unFiniShed BrASS B903 BurniShed & lACquered
rEduCing bArrEl CouplingdiAmeter 5/8” height 9/16” tAp 1/4F x 1/8FB86 unFiniShed BrASS
B87 BurniShed & lACquered
EXtEnsion CouplingdiAmeter 5/8” height 9/16” tAp 1/4F x Slip 1/8F Side hOle tAp #8-32B92 unFiniShed BrASS
B94 BurniShed & lACquered
bArrEl Coupling diAmeter 5/8” height 9/16” tAp 1/4 ipS All thrOugh
B88 unFiniShed BrASS B904 BurniShed & lACquered
BurniShed And lACquered iS A prOCeSS in whiCh the pArtS Are tumBled tOgether in SAnd, And then SprAy
lACquered.
long plAin CouplingdiAmeter 1/2” height 1” tAp 1/8 ipS All thrOugh
unFiniShed BrASS
b1015
plAin CouplingdiAmeter 1/2” height 5/8” tAp 1/8 ipS All thrOugh
B80 unFiniShed BrASS
B81 BurniShed & lACquered
B79 Antique BrASS
B78 niCkel plAted
long plAin Couplingheight 7/8” tAp 1/8 ipS All thrOugh
diAmeter 1/2” B95 unFiniShed BrASS
B76 BurniShed & lACquered
diAmeter 5/8” B83 unFiniShed BrASS
hEAvy plAin CouplingdiAmeter 7/8” height 1” unFiniShed BrASS tApped All thrOugh
B100 tAp 1/4 ipS
ClustEr CouplingdiAmeter 3/4” height 9/16” tAp 1/4F x 1/8FB90 unFiniShed BrASS
B91 SAtin BrASS
B96 BurniShed & lACquered
hEAvy plAin CouplingdiAmeter 3/4” height 3/4” unFiniShed BrASS tApped All thrOugh
B84 tAp 1/8 ipSB85 tAp 1/4 ipS
aLL referenCes to 1/8f and 1/4f are ips.
HA
RD
WA
RE
CO
UP
LIN
GS
AN
D N
EC
KS
P. 17
knurlEd Couplingheight 5/16” tAp 1/8 ipS All thrOugh
B77 unFiniShed BrASS
knurlEd Couplingheight 5/16”tAp 1/4”-27 All thrOugh
B1050 unFiniShed BrASS
plAin CouplingdiAmeter 5/8”height 5/8” unFiniShed BrASS
B89 tAp 1/4 ipSB1200 tAp 1/8F x1/4FB2010 tAp 1/8F ipS
hEX hEAd Couplinghex heAd SiZe 1/2”tAp 1/8 ipS All thrOugh
unFiniShed BrASS
B1210 height 1/2”B1215 height 3/4”
tElEsCoping ClutCh2 pieCe with plAStiC grip Sleeve
3/8” tO 1/2”tAp 1/4F x Slip 1/8 ipSB73 unFiniShed BrASS
turnEd nECkdiAmeter 13/16”height 15/16”Slip 1/8 ipSB233 unFiniShed BrASS
B234 BurniShed & lACquered
turnEd nECkdiAmeter 13/16”height 15/16”tAp 1/8 ipS All thrOugh
B231 unFiniShed BrASS
B232 BurniShed & lACquered
spECiAl CouplingdiAmeter 5/8”height 5/8”tAp 1/8 ipS All thrOugh
B97 unFiniShed BrASS
turnEd nECkdiAmeter 1-1/4”height 1/2”unFiniShed BrASS
B98 tAp 1/8 ipSB99 Slip 1/8 ipS
bEAdEd nECkdiAmeter 13/16”height 15/16”Slip 1/8 ipSB227 unFiniShed BrASS
B228 BurniShed & lACquered
bEAdEd nECkdiAmeter 13/16”height 15/16”tAp 1/8 ipS All thrOugh
B225 unFiniShed BrASS
B226 BurniShed & lACquered
bEAdEd nECkdiAmeter 15/16”height 1-5/16”tAp 1/8 ipS All thrOugh
B920 unFiniShed BrASS
aLL shown aCtuaL size
brass couPlings & necks
HA
RD
WA
RE
NE
CK
SP.
18
turned solid brass necks
turnEd nECk diAmeter 11/16”height 1/2”Slip 1/8 ipSB207 unFiniShed BrASS
turnEd nECk diAmeter 11/16”height 1/2” tAp 1/8 ipSB205 unFiniShed BrASS
turnEd nECk diAmeter 15/16”height 5/8”
Slip 1/8 ipS B215 unFiniShed BrASS
Slip 1/4 ipSB217 unFiniShed BrASS
turnEd nECkdiAmeter 1-1/4”height 7/8”unFiniShed BrASS
B223 Slip 1/4 ipS B222 tAp 1/8 ipS
turnEd nECk diAmeter 15/16”height 5/8”unFiniShed BrASS
B211 tAp 1/8 ipSB219 tAp 1/8F x 1/4FB213 tAp 1/4 ipS
turnEd nECkdiAmeter 11/16”height 7/16”Slip 1/8 ipSB203 unFiniShed BrASS
turnEd nECkdiAmeter 1-1/8”height 3/4”
Slip 1/8 ipSB274 unFiniShed BrASS
tAp 1/8 ipSB921 unFiniShed BrASS
turnEd nECkdiAmeter 11/16”height 7/16”tAp 1/8 ipSB201 unFiniShed BrASS
1/8 ips sLips through a 7/16” diaMeter hoLe
1/4 ips sLips through a 9/16” diaMeter hoLe
HA
RD
WA
RE
SP
IND
LE
SP. 19
ipS iS An ACrOnym FOr irOn pipe StrAight
1/8 ipS iS the mOSt COmmOn threAd in the lAmp And lighting induStry. it iS uSed tO CreAte tuBulAr COnneCtiOnS AllOwing eleCtriCAl wire tO
pASS thrOugh. the ACtuAl OutSide diAmeter OF A 1/8 ipS mAle threAd iS 3/8” with 27 threAdS per inCh.
turned solid brass sPindles
height 2”diAmeter 7/8”Slip 1/8 ipSB261 unFiniShed BrASS
B262 pOliShed & lACquered
height 1-3/4”diAmeter 1-1/8”Slip 1/8 ipSB269 unFiniShed BrASS
height 1-1/2”diAmeter 15/16”Slip 1/8 ipSB245 unFiniShed BrASS
height 2”diAmeter 7/8”tAp 1/8 ipSB270 unFiniShed BrASS
B271 pOliShed & lACquered
height 1-3/4”diAmeter 1-1/8”tAp 1/8 ipSB267 unFiniShed BrASS
height 1-1/2”diAmeter 7/8”tAp 1/8 ipSB247 unFiniShed BrASS
aLL shown aCtuaL size
HA
RD
WA
RE
SP
IND
LE
SP.
20
height 4-1/2”diAmeter 1”
Slip 1/8 ipSB265 unFiniShed BrASS
tAp1/8 ipSB260 unFiniShed BrASS
height 3”diAmeter 3/4”tAp 1/8 ipSB257 unFiniShed BrASS
height 2-5/8”diAmeter 5/8”tAp 1/8 ipSB255 unFiniShed BrASS
height 4-1/8”diAmeter 3/4”tAp 1/8 ipSB263 unFiniShed BrASS
height 1-1/2”diAmeter 5/8”tAp 1/8 ipSB251 unFiniShed BrASS
height 2-1/4”diAmeter 5/8”tAp 1/8 ipSB253 unFiniShed BrASS
height 1-1/2”diAmeter 13/16”Slip 1/8 ipSB249 unFiniShed BrASS
turned solid brass sPindles
HA
RD
WA
RE
HA
RP
S A
ND
SA
DD
LE
SP. 21
rEgulAr dutydEtAChAblE hArpsSwivel tOp • hArp Only
SADDleSolDSepArAtely
BrASS plAted & lACquered
A705 5” A706 5-1/2” A708 6” A709 6-1/2” A710 7” A711 7-1/2” A712 8” A713 8-1/2” A714 9” A715 9-1/2” A716 10” A717 10-1/2” A718 11” A719 11-1/2” A720 12” A721 12-1/2” A722 13” A723 13-1/2” A724 14”
rEgulAr dutydEtAChAblE hArpsSwivel tOp • hArp Only
SADDleSolDSepArAtely
niCkel plAted & lACquered A908 6” A910 7” A911 7-1/2” A912 8” A913 8-1/2” A914 9” A915 9-1/2” A916 10” A918 11” A920 12”
rEgulAr dutydEtAChAblE hArpSwivel tOp
withSADDle
Antique BrASS
A701 4-1/2”
hArp sAddlE
regulAr duty
A757 BrASS plAted
A1655 niCkel plAted
heAvy duty
A758 BrASS plAted
A759 1/4 ipS BrASS plAted
EXtrA widE hArp sAddlE2-5/8" wide · Slip 1/8 ipS
light duty
A930 BrASS plAted
heAvy duty
A931 BrASS plAted
*Due to countless requests, regular Duty harps are solD without saDDles.
prices have been
aDjusteD accorDingly.
harps are packeD in 5 piece bags.
please orDer harps in multiples of 5 pieces.
harps are Measured asseMbLed froM the base of the finiaL thread to the Lowest point on the harp saddLe bottoM.
harPs and saddles
FOr StAndArd phenOliC SOCketS(see eLeCtriCaL CataLog)
A769 Steel BrASS plAted
hArp sAddlE AdAptErs
Slip 1-9/16 Slip 1-7/16
FOr gu24 phenOliC SOCketS(see eLeCtriCaL CataLog)
A770 Steel BrASS plAted
HA
RD
WA
RE
HA
RP
S A
ND
SA
DD
LE
SP.
22
hEAvy dutydEtAChAblE hArpsSwivel tOp • twO pieCe
SADDleincluDeD
BrASS plAted & lACquered
A727 heAvy duty 6”A726 heAvy duty 6-1/2”A728 heAvy duty 7”A729 heAvy duty 7-1/2”A730 heAvy duty 8”A731 heAvy duty 8-1/2”A732 heAvy duty 9”A733 heAvy duty 9-1/2”A734 heAvy duty 10”A735 heAvy duty 10-1/2”A736 heAvy duty 11”A737 heAvy duty 11-1/2”A738 heAvy duty 12”A739 heAvy duty 12-1/2”A740 heAvy duty 13”A741 heAvy duty 13-1/2”A742 heAvy duty 14”
hEAvy dutydEtAChAblE hArpsSwivel tOp • twO pieCe
SADDleincluDeD
niCkel plAted & lACquered A771 heAvy duty 6”A773 heAvy duty 7”A774 heAvy duty 8”A775 heAvy duty 8-1/2”A776 heAvy duty 9”A777 heAvy duty 9-1/2”A778 heAvy duty 10”A779 heAvy duty 10-1/2”A780 heAvy duty 11”A786 heAvy duty 11-1/2”
hEAvy dutydEtAChAblE hArpsSwivel tOp • twO pieCe
SADDleincluDeD
SAtin niCkel & lACquered
A973 heAvy duty 7”A974 heAvy duty 8”A975 heAvy duty 8-1/2”A976 heAvy duty 9”A978 heAvy duty 10”A979 heAvy duty 10-1/2”A980 heAvy duty 11”
SADDleincluDeDwithheAvyDutyhArpSonly
harps are Measured asseMbLed froM the base of the finiaL thread to the Lowest point on the harp saddLe bottoM.
harps are packeD in 5 piece bags.
please orDer harps in multiples of 5 pieces.
harPs and saddles
HA
RD
WA
RE
HA
RP
SP. 23
unfinishEd solidbrAss hArp7” height
2-1/2” width
1/8F x 1/8 ip Slip
A792
unfinishEd solidbrAss hArp7-1/2” height
4” width
1/8F x 1/8 ip Slip
A790
unfinishEd solidbrAss hArp5-3/4” height
4” width
1/8F x 1/8 ip Slip
A794
unfinished solid brass harP
**OverAll
height
HA
RD
WA
RE
AC
CE
SS
OR
IES
P. 2
4harPs • accessories
finiAl stud1/4”-27 threAd length 1/2” B470 BrASS plAted*
“uno” shAdE AdAptEr COnvertS Bridge Or unO
ShAde intO A ShAde wASher. v27 BrASS plAted*
CombinAtion hArp And Cup A783 8”** BrASS plAted & lACquered A785 9-1/4”** BrASS plAted & lACquered(inSert ShOwS hArp ASSemBled. OverAll height dOeS nOt inClude FiniAl threAd.)
A784 hArp Cup Only Cup SlipS 1/8 ipS
*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together
in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL, rather than shiny.
dEsignEdfor mogAl/Edison bAsE Cup holdErse1401, e1403A787
HA
RD
WA
RE
AD
AP
TE
RS
AN
D R
ISE
RS
P. 25bulb adaPters • risers
bulb AdAptEr brAss plAtEd*COnvertS wASher type ShAde tO Fit On BulB.
(A19 & A21 lAmpS)A755
bulb AdAptEr brAss plAtEd*COnvertS wASher type ShAde tO Fit On B-10 type BulB.(CAndelABrA lAmpS)A756
stEEl rEflECtor typE shAdE risErunFiniShed
v80 6”v81 8”v82 10”
shAdE Clip for rEflECtor lAmp niCkel plAted A766
*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL rather than shiny.
brAss plAtEdbulb Clip AdAptEr(SOld withOut FiniAl)A753
spidEr wAshEr8/32F tApped Side hOleS
B8803 3 hOleS
B8804 4 hOleS
HA
RD
WA
RE
SH
AD
E R
ISE
RS
P. 2
6finials & shade risers
diE CAst finiAlheight 1/2”tAp #1/4-27 with 5 Full threAdS
B3800 BrASS plAted B3810 niCkel plAted
B3815 SAtin niCkel
stAmpEd finiAlheight 1/2”tAp 1/4”-27B291 BrASS plAted*B294 niCkel plAted
stAmpEd finiAlheight 1”tAp 1/4”-27B295 BrASS plAted*
solid brAss shAdE risErsunFiniShed mOdern Style
threAded 1/4”-27 x 1/4”-27 SiZe dOeS nOt inClude
7/16” mAle threAd
BOdy SiZe
B930 1”B931 1-1/2”B932 2”
solid brAssshAdE risErsunFiniShed trAditiOnAl Style
threAded 1/4”-27 x 1/4”-27 SiZe dOeS nOt inClude
7/16” mAle threAd
BOdy SiZe
B1558 1/2” B559 3/4”B560 1”B561 1-1/2”B562 2”
solid brAssfiniAl AdAptErunFiniShed
mAle threAd 7/16”1/8F x 1/4”-27mb535
sTamPed Brass shade risersSOlid BrASS with lACquered FiniSh
*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL rather than shiny.
height 2” b584
height 1-1/2” b583
height 1” b582
height 1/2” b581
HA
RD
WA
RE
FIN
IAL
S A
ND
KN
OB
SP. 27
die cast finials & knobs
pinEApplE knob height 1-1/2”tAp 1/8 ipSB650 BrASS plAted B651 Antique BrASS
ACorn finiAl height 1-1/2” tAp 1/8 ipSB648 Antique BrASS
bud knob height 1-1/2” tAp 1/8 ipSB658 BrASS plAted B659 Antique BrASS
smAll pyrAmid knob height 3/4” tAp 1/8 ipSB348 Antique BrASS B349 BrASS plAted
lArgE pyrAmid knob height 1-1/4” tAp 1/8 ipSB662 BrASS plAted B1663 Antique BrASS
smAll pyrAmid knob with pull-ChAin holE height 3/4” SlipS #6 BeAded ChAin
tAp 1/8 ipSB350 BrASS plAted
lArgE pillAr knobheight 3-1/4” tAp 1/8 ipSB675 Antique BrASS
rosEttE knobdiAmeter 1-1/2” tAp 1/8 ipSB692 eleCtriC BrASS
B693 Antique BrASS
pillAr knobheight 2-1/4”tAp 1/8 ipSB673 Antique BrASS
aLL shown aCtuaL size
HA
RD
WA
RE
FIN
IAL
SP.
28
solid brass finials
1-1/8” brAss finiAl
tAp 1/4”-27B283 unFiniShed B284 BurniShed & lACquered
tAp 1/8 ipSB842 unFiniShed
1” brAss finiAl
tAp 1/4”-27B275 unFiniShed B276 BurniShed & lACquered
tAp 1/8 ipSB839 unFiniShed B840 BurniShed & lACquered
1-1/2” brAss finiAl
tAp 1/4”-27B277 unFiniShed B278 BurniShed & lACquered
tAp 1/8 ipSB841 unFiniShed
2-1/2” brAssfiniAl
tAp 1/4”-27B837 unFiniShed B835 BurniShed & lACquered
tAp 1/8 ipSB838 unFiniShed
2” brAss finiAl tAp 1/4”-27B279 unFiniShed B280 BurniShed & lACquered
2” brAss finiAl
tAp 1/4”-27B287 unFiniShed B288 pOliShed & lACquered
tAp 1/8 ipSB395 unFiniShed
1-1/4” urn OverAll height 1-3/16” 3/16” threAded 1/8 ipS mAle B173 unFiniShed
3” brAss finiAl tAp 1/8 ipSB843 unFiniShed
3” brAss finiAl tAp 1/8 ipSB289 unFiniShed
B290 pOliShed & lACquered
6-prong swivEl finiAl bAsE tAp 1/4”-27B1380 BurniShed & lACquered
slottEdswivEl finiAl bAsEtAp 1/4”-27B1387 BurniShed & lACquered
swivEl finiAl bAsEtAp #4-36 tOp tAp 1/4”-27B1375 BurniShed & lACquered
3-1/4” solid brAss finiAltApped 1/8 ipSBulge 1-5/16”1” SquAre FOOting
B853 unFiniShed
2-1/16” solid brAss finiAl1” BAll • tApped 1/8 ipS1” SquAre FOOting
B832unFiniShed
HA
RD
WA
RE
FIN
IAL
SP. 29
brass finials
w1044ht: 3”
w1091ht: 2-7⁄8”
w1026ht: 2”
w1035ht: 1-3⁄8”
w1045ht: 1-7⁄16”
w1036ht: 1-1⁄4”
w1048ht: 1-7⁄8”
w1019ht: 3-1⁄8”
w1006ht: 2-1⁄4”
w1049ht: 2-1⁄8”
w1175ht: 3-3⁄8”
w1003ht: 2-5⁄8”
w1007ht: 2-3⁄4”
w1023ht: 2”
aLL finiaLs on this page are tap 1/4-27 ip-f
HA
RD
WA
RE
FIN
IAL
SP.
30
brass finials
w1035-53SAtin niCkel
ht: 1-3⁄8”
w7101ruSt
ht: 2”
w1111ht: 2-3⁄8”
w1112ht: 3-1⁄8”
w1110ht: 2”
w1050ht: 1-7⁄16”
w1051ht: 1-9⁄16”
w1052ht: 1-11⁄16”
w1053ht: 1-7⁄8”
anTique Brass
w1700SwArOvSki
hAnd Cut & pOliShed
ht: 1-1⁄2”
aLL finiaLs on this page are tap 1/4-27 ip-f
HA
RD
WA
RE
FIN
IAL
SP. 31
brass finials
w1287pewter
ht: 1-1⁄2”
w1288pewter
ht: 1-3⁄4”
w1283pewter
ht: 2-3⁄8”
w1282pewter
ht: 2”
w1160ht: 1-7⁄16”
w1190ht: 1-11⁄16”
w1185ht: 1-3⁄8”
w1187ht: 2”
Chrome PLaTed
PeWTer
aLL finiaLs on this page are tap 1/4-27 ip-f
HA
RD
WA
RE
FIN
IAL
SP.
32
wood and acrylic finials
w3000ht: 1-3⁄4”CleAr ACryliC
w3001ht: 1-1⁄2”CleAr ACryliC
w2550ht: 1-1⁄4”unFiniShed wAlnut
w2560ht: 1-1⁄2”unFiniShed wAlnut
w2570ht: 1-3⁄4”unFiniShed wAlnut
w2575ht: 1-3⁄4”wAlnut
w2565ht: 1-1⁄2”wAlnut
w2555ht: 1-1⁄4”wAlnut
CLear aCryLiC
aLL finiaLs on this page are tap 1/4-27 ip-f
HA
RD
WA
RE
KN
OB
SP. 33
solid brass knobs
smAll pyrAmid knob diAmeter 9/16” height 5/8”
tAp 1/4”-27 B889 unFiniShed
B890 BurniShed & lACquered
tAp 1/8 ipSB321 unFiniShed B322 BurniShed & lACquered
B1611 niCkel plAted
mEdium pyrAmid knob diAmeter 3/4” height 1”
tAp 1/4”-27 B327 unFiniShed
B328 BurniShed & lACquered
tAp 1/8 ipSB323 unFiniShed B324 BurniShed & lACquered
lArgE pyrAmid knob diAmeter 7/8” height 1-1/4”
tAp 1/4”-27 B844 unFiniShed
tAp 1/8 ipSB325 unFiniShed B326 BurniShed & lACquered
plAin brAss knob diAmeter 9/16” height 11/16” tAp 1/8 ipSB329 unFiniShed
B330 BurniShed & lACquered
plAin brAss knob diAmeter 5/8” height 3/4”
tAp 1/8 ipSB318 unFiniShed
B3826 BurniShed & lACquered
tAp 1/4”-27B319 unFiniShed
plAin brAss knob diAmeter 3/4” height 1” tAp 1/8 ipSB316 unFiniShed
brAss knurlEd knob diAmeter 1/2” height 9/16” tAp 1/4”-27B333 unFiniShed B334 BurniShed & lACquered
brAss ACorn knob diAmeter 1/2”height 1/2”tAp 1/8 ipSB850 unFiniShed
brAss ACorn knob diAmeter 1/2” OverAll height 7/8”1/8” threAded 1/8 ipS mAle
B895 unFiniShed
HA
RD
WA
RE
KN
OB
S A
ND
CA
PS
P. 3
4
aLL shown aCtuaL size
knobs & caPs
smAll brAss pyrAmid knobthrOugh Side hOle FOr priSm pin
diAmeter 9/16” height 5/8” tAp 1/8 ipSB320 unFiniShed
brAsspEAr knobdiAmeter 3/8”height 9/16” tAp #8-32B896 unFiniShed
smAll brAss pyrAmid knob#6 BeAded ChAin hOle
diAmeter 9/16” height 5/8” tAp 1/8 ipS B847 unFiniShed B1610 BurniShed & lACquered
brAssknurlEd knobdiAmeter 11/32”height 19/64”tAp #8-32B565 unFiniShed B566 BurniShed & lACquered B567 Antique BrASS
B568 BlACk B569 niCkel plAted
brAssknurlEd switCh knobdiAmeter 15/64”length 5/8”tAp #4-36B684 unFiniShed
brAssknurlEd knobdiAmeter 21/64”height 3/8”tAp #8-32B576 unFiniShed B577 BurniShed & lACquered
brAss flAt CApdiAmeter 1-1/4”height 3/8”tAp 1/8 ipSB4710 unFiniShed
brAss flAt CApdiAmeter 5/8”height 3/8”tAp 1/8 ipSB4701 niCkel plAted
B4705 unFiniShed
modErnbrAss CApdiAmeter 1/2”height 5/16”tAp 1/8 ipSB4700 unFiniShed
brAssflAt knobdiAmeter 3/4”height 1/4”tAp 1/8 ipSB339 unFiniShed B340 BurniShed & lACquered
brAssCylindEr knobdiAmeter 1/4”height 9/32”tAp #8-32B1617 unFiniShed B1620 niCkel plAted
brAssflAt knurlEdbrACkEt CApdiAmeter 9/16”height 7/32”tAp 1/8 ipSB343 unFiniShed
solid brAssCross drillEd sCrEw #6-32 threAd
heAd diAmeter 5/32” 5/32” ShAnk
b479 Unfinished
hEX bAll CAp nuthex 7/16”height 7/16”8/32 F tAp
b5080
rEplACEmEntbrAss knobdiAmeter 5/16”height 3/8” tAp #4-36B580 unFiniShed
HA
RD
WA
RE
KN
OB
S A
ND
CA
PS
P. 35knobs & caPs
brAss CAp diAmeter 9/16” height 11/32”
tAp 1/8 ipSB1599 unFiniShed
B1600 BurniShed & lACquered
B1605 niCkel plAted
tAp # 8-32B332 unFiniShed
B337 BurniShed & lACquered
B338 niCkel plAted
brAsshEX CAp diAmeter 1/2”height 1/4”tAp 1/8 ipSB1621 BurniShed & lACquered
brAss brACkEt CApdiAmeter 9/16”height 1/4”
tAp 1/8 ipSB345 unFiniShed B386 Antique BrASS
B346 BurniShed & lACquered B347 niCkel plAted B387 BlACk
B391 ruSt
B392 SAnd
tAp #8-32B1624 unFiniShed
brAssflAngE CApdiAmeter 15/16”tAp 1/8 ipSB336 BurniShed & lACquered
brAssflAt knurlEd knob diAmeter 15/16”height 5/16”tAp 1/8 ipSB341 unFiniShed
CAst brAssrosEttE CApdiAmeter 3/4”tAp 1/8 ipSB698 unFiniShed
hEAvy brAssknurlEd knobdiAmeter 27/32”height 1/2”tAp 1/4 ipSB331 unFiniShed
brAss gAs CApblind (not through)diAmeter 3/4”height 3/8”tOp tApped 1/8 ipSBOttOm tApped 3/8 ipSB919 unFiniShed
plAstiC CAp diAmeter 3/4” height 13/32”tAp 1/8 ipSB667 white
HA
RD
WA
RE
NU
TS
, K
EY
S A
ND
EX
TE
NS
ION
SP.
36
brass & steel thumb nuts, keys & extensions
soCkeT keys and exTensions
threAded key extenSiOnS SOlid BrASS • unFiniShed
the MandreL thread size on a 3-way soCket is #4-36M.newer turn knobs are aLso threaded #4-36M.
knurlEd solid brAss kEyknOB diAmeter 5/8”
unFiniShed
B510 1-1/4” #4-36FB511 1-1/4” #6-32F
BurniShed & lACquered
B1670 1-1/4” #4-36F
knurlEd solid brAss kEy #4-36flength 3/4”knOB diAmeter 5/8”B1671 BurniShed & lACquered
diE CAst mEtAl kEyB501 #4-36F BrASS plAted
B500 #4-36F Antique BrASS B502 #6-32F BrASS plAted
B944 #6-32F Antique BrASS
kEy EXtEnsion #6-32F x #6-32mdiAmeter 1/4”BOdy 1/2” lOng
threAd 1/4”b946
splinEd kEy EXtEnsion FOr dimmer SOCket d4038On pAge 33#6-32mb945
#6-32F x #4-36mB508 3/4” BOdy
#6-32F x #6-32mB506 3/4” BOdy
#4-36F x #6-32mB509 3/4” BOdy
#4-36F x #4-36mB503 1/2” BOdy
B504 3/4” BOdy
B505 1” BOdy
B943 1-1/4” BOdy
brAss gAs AttAChmEnt length 2-1/2”Center tO Center 2-1/8”1/8 ipS mAle x Slip 1/8 ipSB594 unFiniShed
slottEd plug unFiniShed BrASS B481 1/8 ipS mAle
B482 1/4 ipS mAle
plug button BrASS plAted B480 1/8 ipS hOle
B478 1/4 ipS hOle
brAss EyElEt bushingdiAmeter 1/4”height 11/64”tAp #8-32B571 unFiniShed
brAss bAttEry nut diAmeter 11/32”height 3/16”tAp #8-32B574 unFiniShed
brAss knurlEd thumb nutdiAmeter 7/16”height 5/16”tAp #8-32B851 unFiniShed
phEnoliC turn-knobBlACk • #4-36Fb499
phEnoliC turn-knobwith BrASS ShAnk extenSiOn
BlACk • #4-36Fb9499
phEnoliC turn-knobwith BrASS ShAnk extenSiOn
BlACk • #4-36mb9470
kEy EXtEnsion #4-36F x #4-36mdiAmeter 1/4”BOdy 1/2” lOng
threAd 1/4”b9480
kEy EXtEnsion #4-36F x #4-36mdiAmeter 1/4”BOdy 1/2” lOng
threAd 1/4”b9482
brAss knurlEd knob OverAll diAmeter 5/8”BArrel O.d. diAmeter 17/32"length 31/32”FitS On d185, d186, d188B1672 unfiniSheD
HA
RD
WA
RE
NO
ZZ
LE
SP. 37
unfinished solid brass noZZles
*1/10 is standard european MetriC thread
unFinished soLid Brass arm BaCks & eLBoWs
blind noZZlEheight 7/8”B918 1/2F x 3/8m, 1/8F
strAight noZZlEheight 13/16”B58 1/4F x 1/8mB911 3/8F x 1/8m
strAight noZZlEheight 19/32”B910 1/8F x 1/8mB3770 1/10F* x 1/8m
ConE noZZlEheight 19/32”B56 1/8F x 1/8mB57 5/16”-27 x 1/8m
bEAdEd noZZlEheight 9/16”B62 1/8F x 1/8m
Cut noZZlEheight 3/4”B912 1/4F x 1/8m
Cut noZZlEheight 3/4”B913 3/8F x 1/8m
AnglE noZZlE45 degree
height 27/32”B61 1/8F x 1/8m
AnglE noZZlE90 degree
height 13/16”B60 1/8F x 1/8m
lArgE AnglE noZZlE45 degree
height 27/32”B915 1/8F x 1/8m
lArgE AnglE noZZlE90 degree
height 13/16”B914 1/8F x 1/8m
3-wAy Arm bACk diAmeter 7/8”height 1-1/8”BOttOm & twO Side hOleS B273 tAp 1/8 ipSB272 tAp 1/4 ipS
3-wAy tEEdiAmeter 5/8” height 7/8” BOttOm tAp 1/8 ipSB364 twO Side hOleS Slip 1/8 ipSB64 twO Side hOleS
tAp 1/8 ipS
4-holE Arm bACk diAmeter 9/16”height 13/16” B67 tAp 1/8 ipS
3-holE Arm bACk diAmeter 9/16” height 13/16” B65 tAp 1/8 ipS
2-wAy Arm bACk BOttOm & One Side hOle diAmeter 7/8”height 1”B299 tAp 1/8 ipSB298 tAp 1/4 ipS
Elbow BOttOm & One Side hOle diAmeter 5/8”height 7/8”B63 tAp 1/8 ipS
3-wAy Arm bACk diAmeter 3/4”height 3/4”B59 tAp 1/8 ipS
2-wAy Arm bACkdiAmeter 9/16”height 1-1/8” tOp & One Side hOle
B66 tAp 1/8 ipS
HA
RD
WA
RE
LO
OP
SP.
38
unfinished cast brass looPs
aLL shown aCtuaL size
CAst brAss loopdiAmeter 7/8” • height 1”
with wirewAy
e776 tAp 1/4 ipS
CAst brAss loopdiAmeter 1” • height 1-1/8”
with wirewAy
e773 tAp 1/8 ipS
CAst brAss loopdiAmeter 1” • height 1”
with wirewAy
e771 threAded 1/8 ipS mAle
CAst brAss loopdiAmeter 1-5/8” • height 1-3/4”
with wirewAy
e854 tAp 1/8 ipSe855 tAp 1/4 ipS
CAst brAss loopdiAmeter 1-1/2” • height 1-5/8”
with wirewAy
e813 tAp 1/8 ipSe853 tAp 1/4 ipS
withOut wirewAy
e819 tAp 1/8 ipS
hEAvy loopdiAmeter 1-5/8” • height 2-1/8”
with wirewAy
e818 tAp 1/4 ipSe816 tAp 3/8 ipS
CAst brAss loopdiAmeter 2” • height 2-5/16”
with wirewAy
e793 tAp 1/8 ipSe794 tAp 1/4 ipS
withOut wirewAy
e829 tAp 1/8 ipS
soldErEd ring loopdiAmeter 1-3/4” • height 2”
withOut wirewAy
e850 tAp 1/8 ipS
HA
RD
WA
RE
LO
OP
SP. 39
unfinished cast brass looPs
aLL shown aCtuaL size
EXtrA hEAvy CAstbrAss loopdiAmeter 3-1/2” • height 4-1/2”
with wirewAy
e799 tAp 1/2 ipS
hEAvy CAst brAss loopdiAmeter 2-3/4” • height 3-1/2”
with wirewAy
e836 tAp 1/8 ipSe837 tAp 1/4 ipSe859 tAp 3/8 ipSe838 tAp 1/2 ipS
withOut wirewAy
e839 tAp 1/8 ipS
hEAvy CAst brAss loopdiAmeter 2-1/4” • height 3-1/4”
with wirewAy
e800 tAp 1/4 ipS
CAst brAss ovAl loopdiAmeter 2-3/8” • height 2”
withOut wirewAy
e809 tAp 1/8 ipS
CAst brAss loopdiAmeter 2-1/4” • height 2-1/2”
with wirewAy
e852 tAp 1/4 ipS
HA
RD
WA
RE
LO
OP
SP.
40
all shown actual siZe
CAst brAss sCrEw CollAr loop & ringBASe ring diAmeter 1-1/2” • height 1-9/16”heAvy duty with wirewAy
threAd FitS 1-3/32” CAnOpy hOle
ring SeAtS 1-13/32” CAnOpy hOle
e788 tAp 1/4 ipS unFiniShed
e788-10 tAp 1/4 ipS pOliShed BrASS
e788-11 tAp 1/4 ipS Antique BrASS
e788-53 tAp 1/4 ipS SAtin niCkel
e788-62 tAp 1/4 ipS ruBBed BrOnZe
CAst brAss hAng strAight loopwidth 3-1/4” • height 2-1/2”with wirewAy
e5141 tAp 1/8 ipS unFiniShed
CAst brAss hAng strAight loopwidth 2-1/2” • height 1-1/2”with wirewAy
e5743 tAp 1/8 ipS unFiniShed
e5746 tAp 1/8 ipS pOliShed & lACquered
CAst brAss sCrEw CollAr loop & ringwidth 1-1/2” • height 2-1/8”with wirewAy
threAd FitS 1-1/4” CAnOpy hOle
ring SeAtS 1-13/32” CAnOpy hOle
e783 tAp 3/8 ipS unFiniShed
e784 tAp 1/4 ipS unFiniShed
CAst brAss sCrEw CollAr loop & ringBASe ring diAmeter 1-1/2” • height 3-1/4”heAvy duty with wirewAy
threAd FitS 1-1/4” CAnOpy hOle
ring SeAtS 1-13/32” CAnOpy hOle
e789 tAp 1/4 ipS unFiniShed
e795 tAp 3/8 ipS unFiniShed
e796 tAp 3/8 ipS niCkel plAted e797 tAp 1/2 ipS unFiniShed
e798 tAp 1/2 ipS niCkel plAted
CAst brAss sCrEw CollAr loop & ringBASe ring diAmeter 1-3/16” • height 1-3/4”with wirewAy
threAd FitS 1” CAnOpy hOle
ring SeAtS 1-1/16” CAnOpy hOle
e786 tAp 1/8 ipS unFiniShed
e785 tAp 1/4 ipS unFiniShed
e6660 tAp 1/4 ipS SAtin niCkel plAted
HA
RD
WA
RE
LO
OP
SP. 41
hAng strAight loop2-1/2” height
tAp 1/8 ipSE5020
CAst brAss loopwidth 1-11/16” • height 1-15/16”tAp 1/8 ipSE731
CAst brAss loopwidth 1-11/16” • height 2”tAp 1/8 ipSE732
CAst brAss loopwidth 1-3/16 “ • height 2-3/16”tAp 1/8 ipSE814
CAst brAss loopwidth 1-9/16” • height 1-3/4”tAp 1/8 ipSE730
unfinished cast brass looPs
Loops shown aCtuaL size and aLL have wireways
HA
RD
WA
RE
LO
OP
SP.
42
unfinished cast brass looPs
lArgE loop3-3/4” height
1/8F with wirewAy
E5021
lArgE loop2-3/4” height
1/8F with wirewAy
E5022
lArgE loop3” height
1/8F with wirewAy
E5023
lArgE loop2-1/2” height
1/8F with wirewAy
E5024
lArgE loop3-5/8” height
1/8F with wirewAy
E5025
HA
RD
WA
RE
LO
OP
SP. 43
unfinished cast brass looPs
lArgE loop2-3/4” height
1/8F with wirewAy
E5026
lArgE loop1-3/4” height
1/8F with wirewAy
E5027
lArgE loop3-1/4” height
1/8F with wirewAy
E5028
lArgE loop3-5/8” height
1/8F with wirewAy
E5029
lArgE loop3-3/8” height
1/8F with wirewAy
E5030
HA
RD
WA
RE
LO
OP
SP.
44
unfinished cast brass looPs
aLL shown aCtuaL size
CAst brAss loopwidth 1-7/8” • height 3-3/4”with wirewAy
tAp 1/8 ipSb741
CAst brAss loopwidth 2-5/8” • height 3-1/8” with wirewAy
tAp 1/4 ipSE5142
CAst brAss loop width 2-3/8” • height 3-1/8”with wirewAy
tAp 1/8 ipSE5301
HA
RD
WA
RE
LO
OP
SP. 45
cast brass and Pressure cast Zinc looPs
CasT Brass LooPs
Pressure CasT ZinC LooPs WiTh WireWay
CAst brAss loopwidth 2-3/8” • height 2-3/8”nO wirewAy
tAp 1/8 ipSe5302 unFiniShed
CAst brAss loop width 3” • height 3-1/2” nO wirewAy tAp 1/8 ipSe5540 unFiniShed
loop diAmEtEr 3/4” height 7/8” tAp 1/8 ipSB751 BrASS plAted*B752 Antique BrASS B753 dull BlACk
loop diAmEtEr 3/4” height 1-1/8” threAded 1/8 ipS mAle
B758 BrASS plAted*B759 Antique BrASS
loop diAmEtEr 1” height 1-1/8” tAp 1/8 ipSB703 BrASS plAted*B705 Antique BrASS
B708 ChrOme plAted B700 dull BlACk B697 white B762 ruSt
loop diAmEtEr 1” height 1-1/8”threAded 1/8 ipS mAle
B704 BrASS plAted*B706 Antique BrASS
B709 ChrOme plAted B701 dull BlACk
aLL shown aCtuaL size.*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together
in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL rather than shiny.
HA
RD
WA
RE
LO
OP
SP.
46
Pressure cast Zinc looPs with wireways
ColoniAl loop diAmeter 1-1/2” • height 1-5/8”tAp 1/8 ipSB711 BrASS plAted*B712 Antique BrASS
B795 eleCtriC BrASS
B710 eleCtriC ChrOme B713 dull BlACk
B765 ruSt
B766 SAnd
hAng strAight loopwith Set SCrew width 1-5/8” • height 1-5/16”tAp 1/8 ipSB1740 BrASS plAted
sCrEw CollAr loopwith ring
BASe ring diAmeter 1-1/4”height 1-3/4”SeAtS 1” CAnOpy hOle
tAp 1/4 ipSB714 BrASS plAted B715 Antique BrASS B717 eleCtriC ChrOme B716 dull BlACk B718 white
B768 ruSt
B769 SAnd
tAp 1/8 ipSB719 BrASS plAted*B720 Antique BrASS
width 1-7/16” • height 2”tAp 1/8 ipSB723 BrASS plAted*B724 Antique BrASS B728 dull BlACk
width 1-3/4” • height 2-1/4”tAp 1/8 ipSB726 BrASS plAted*
width 1” • height 1-7/8”tAp 1/8 ipSB737 eleCtriC BrASS B738 Antique BrASS
loopw/ nOtCheS
diAmeter 2” • height 2-3/4”1/8 F tAp
B5041vACuum plAted BrASS
loopdiAmeter 2” • height 2-3/4”1/4-27 F tAp
B5042 unFiniShed
HA
RD
WA
RE
BA
LL
SP. 47
turned brass balls
soLid Brass haLF BaLLs
soLid Brass BaLLs
diAmeter 1/2” height 17/64”
tAp 1/8 ipSB380 unFiniShed
tAp #8-32B970 unFiniShed
diAmeter 5/8”
tAp 1/4”-27B378 unFiniShed
tAp 1/8 ipSB880 unFiniShed
diAmeter 3/4”
tAp 1/8 ipSB381 unFiniShed
B881 BurniShed & lACquered
tAp #8-32B971 unFiniShed
diAmeter 1” tAp 1/8 ipSB383 unFiniShed
diAmeter 1-1/4” unFiniShed
B882 tAp 1/8 ipSB384 tAp 1/4 ipS
diAmeter 3/4”
tAp 1/4”-27B864 unFiniShed tAp 1/8 ipSB361 unFiniShed
B865 BurniShed & lACquered
B1340 niCkel plAted
Slip thrOugh 1/8 ipSB362 unFiniShed
diAmeter 1/2” height 3/8”
tAp 1/8 ipSB356 unFiniShed
diAmeter 1/2”
tAp 1/4”-27B861 unFiniShed
tAp #8-32B355 unFiniShed
B863 BurniShed & lACquered
B1639 niCkel plAted
diAmeter 3/8”
tAp #8-32B353 unFiniShed B354 BurniShed & lACquered B859 Antique BrASS
B860 niCkel plAted
tAp #6-32B370 unFiniShed
diAmeter 5/8”
tAp 1/4”-27B360 unFiniShed
tAp 1/8 ipSB359 unFiniShed
B1637 niCkel plAted
diAmeter 9/16” tAp 1/8 ipSB357 unFiniShed
HA
RD
WA
RE
BA
LL
SP.
48
solid brass turned balls
brAss bAlldiAmeter 1”
tAp 1/8 ipSB367 unFiniShed
B866 hAnd pOliShed
& lACquered
tAp 1/4 ipSB1634 unFiniShed
tAp thrOugh 1/8 ipSB1638 unFiniShed
brAss bAlldiAmeter 1”
tAp #8-32B868 unFiniShed
tAp 1/4”-27B867 unFiniShed
brAss bAlldiAmeter 7/8”
tAp 1/4”-27B869 unFiniShed
tAp 1/8 ipSB365 unFiniShed
brAss bAlldiAmeter 1-1/4”
tAp 1/4”-27B871 unFiniShed
tAp 1/8 ipSB371 unFiniShed
B870 hAnd pOliShed & lACquered
brAss bAlldiAmeter 1-1/2” tAp 1/8 ipSB375 unFiniShed
brAss bAlldiAmeter 1-1/8” tAp 1/8 ipSB369 unFiniShed
brAss bAlldiAmeter 2” tAp 1/8 ipSB377 unFiniShed
brAss bAlldiAmeter 1-3/4” tAp 1/8 ipSB376 unFiniShed
HA
RD
WA
RE
BA
LL
SP. 49
unfinished solid steel turned balls
stEEl bAll1” diAmeter tAp 1/8 ipSb1367
stEEl bAll1” diAmeter
thrOugh Slip hOleB1399 Slip 1/8 ipS
stEEl bAll1-1/8” diAmeter tAp 1/8 ipSb1369
stEEl bAll1-1/4” diAmeter
thrOugh Slip hOle B1372 Slip 1/8 ipSB1373 Slip 1/4 ipS
stEEl bAll2” diAmeter
tAp 1/8 ipSb1395
stEEl bAll1-1/2” diAmeter
tAp 1/8 ipSb1390
stEEl bAll1-1/8” diAmeter
thrOugh Slip hOle B1370 Slip1/8 ipS B1374 Slip 1/4 ipS
stEEl bAll1-1/4” diAmeter
B1371 tAp 1/8 ipS
HA
RD
WA
RE
CL
US
TE
R B
OD
IES
P. 5
0brass cluster bodies
2-piECE ColoniAlClustEr body height 1-9/16” diAmeter 1-1/2” unFiniShed turned BrASS
Side hOleS tApped 1/8 ipStOp & BOttOm tApped 1/8 ipSA630 nO hOleS
A632 2 Side hOleS A633 3 Side hOleS A638 4 Side hOleS A639 5 Side hOleS
A640 6 Side hOleS
Side hOleS tApped 1/8 ipStOp tApped 1/8 ipSBOttOm tApped 1/4 ipSA637 3 Side hOleS Side hOleS tApped 1/4 ipStOp tApped 1/8 ipSBOttOm tApped 1/4 ipSA641 4 Side hOleS
2-piECE modErn ClustEr body diAmeter 1-1/2” • height 1-1/4”unFiniShed turned BrASS
Side hOleS tApped 1/8 ipS
tOp & BOttOm tApped 1/8 ipSA591 2 hOleS A592 3 hOleS A593 4 hOleS
2-piECE smAllClustEr body diAmeter 1-1/8” • height 1-1/8”unFiniShed turned BrASS
Side hOleS tApped 1/8 ipS
tOp & BOttOm tApped 1/8 ipSA600 nO hOleS
A601 2 Side hOleS A602 3 Side hOleS A603 4 Side hOleS
tOp tApped 1/8 ipSBOttOm tApped 1/4 ipSA604 2 Side hOleS
solid brAss 3-ArmCluSter BOdy
1/8 ipS • diAmeter 3-1/2”ArmS threAded 1/2”A658 pOliShed & lACquered
A6588 unFiniShed
SOlid BrASS 2-light “S” Arm CluSter BOdy
ArmS threAded 1/4”
SpreAd 5-1/2”1/8 ipS tOp • 1/4 ipS BOttOm
A662 unFiniShed
A663 pOliShed & lACquered
A664 SAtin BrASS & lACquered
SpreAd 7-1/2”1/8 ipS tOp • 1/4 ipS BOttOm A659 unFiniShed
A660 pOliShed & lACquered
A661 SAtin BrASS & lACquered
SpreAd 5-1/2”1/8 ipS tOp • 1/8 ipS BOttOm
A667 unFiniShed
A669 pOliShed & lACquered
A668 SAtin BrASS & lACquered
2-piECE ClustEr bodydiAmeter 1-1/4” • height 1-5/32”unFiniShed turned BrASS
Side hOleS tApped 1/8 ipS
tOp & BOttOm tApped 1/8 ipSA1900 nO hOleS
A1901 2 Side hOleS A1902 3 Side hOleS A1903 4 Side hOleS
HA
RD
WA
RE
FIN
IAL
S A
ND
NE
CK
SP. 51
finials & necks
sTamPed sTeeL FiniaLsBrASS plAted & lACquered
sTamPed sTeeL neCksSlip 1/8 ipS
brAss spun nECkSlipS 1/8 ipS • height 1”tOp diAmeter 3/4”BOttOm diAmeter
SeAtS 1-3/8”B297 unFiniShed BrASS
height 1”tAp 1/4”-27B295 BrASS plAted*
height 1/2”tAp 1/4”-27B291 BrASS plAted* B294 niCkel plAted
diE CAst finiAlheight 1/2”tAp 1/4”-27with 5 Full threAdS
B3800 BrASS plAted B3810 ChrOme plAted
B3815 SAtin niCkel
height 2” diAmeter 7/8”B243 BrASS plAted*B1907 unFiniShed Steel
height 2” diAmeter 5/8”BOttOm diAmeter 15/16”B1242 BrASS plAted*B1918 unFiniShed Steel
height 1-1/2” diAmeter 5/8”BOttOm diAmeter 15/16”B1241 BrASS plAted* B1908 unFiniShed Steel
height 1” diAmeter 5/8”BOttOm diAmeter 15/16”B1240 BrASS plAted*B1915 unFiniShed Steel
B1245 eleCtriC ChrOme
lArgE widE nECkheight 1-1/16” tOp diAmeter 13/16”BOttOm SeAtS 1-3/8”B1250 unFiniShed Steel
B1251 eleCtriC BrASS
B1252 eleCtriC ChrOme
height 1-1/2” diAmeter 7/8”B242 BrASS plAted*B1910 unFiniShed Steel
lArgE nECkheight 1” tOp diAmeter 3/4”BOttOm SeAtS 1”B239 BrASS plAted*
mEdium nECkheight 5/8” tOp diAmeter 11/16”BOttOm SeAtS 7/8”B238 BrASS plAted*
aLL shown aCtuaL size.*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together
in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL rather than shiny.
HA
RD
WA
RE
SW
IVE
LS
P. 5
2solid brass swivelsSwivelS Are unFiniShed unleSS OtherwiSe StAted
brAss bAll swivEl milled – ApprOved with StOp
height 1-1/2”diAmeter 5/8”1/8F x 1/8mb512
piCturE light brAss swivElmilled – ApprOved with StOp
height 1-3/4”diAmeter 5/8” 1/8F x 1/8mb520
brAss stAndArd swivElheight 1-1/4” diAmeter 11/16” 1/8F x 1/8mb514
mEdium brAss swivElheight 1-5/8”diAmeter 7/8”B507 1/8F x 1/8mB949 1/4F x 1/8m
lArgE brAss swivElheight 2-5/16”diAmeter 1-1/4”1/4F x 1/4mb952
modErn brAsslong swivElheight 1-5/8”diAmeter 3/4”1/8F x 1/8mb516
modErn brAss swivElheight 1-3/8”diAmeter 5/8”1/8F x 1/8mb523
smAll brAss swivElheight 1-5/16”diAmeter 9/16”1/8F x 1/8mb513
stop swivElheight 1-5/8”diAmeter 9/16”1/4F x 1/8mb5522
tApErEd brAss swivElheight 1-7/16”diAmeter 5/8”1/8F x 1/8mb515
short stop swivElheight 1-7/16”diAmeter 5/8”1/8F x 1/8mb5523
aLL threads and taps are ipsaLL shown aCtuaL size
90° Cut-out swivElheight 2-1/8”diAmeter 5/8”1/8F x 1/8mB1880 unFiniShed
B1881 ChrOme
B1882 pOliShed & lACquered
HA
RD
WA
RE
SW
IVE
LS
P. 53swivels
die CasT sWiveLs
theSe SwivelS FeAture the wing-ButtOn lOCk FOr SeCure pOSitiOning And eASy AdjuStment OF the heAvier type lAmp ShAdeS.thumB SCrew lOCkS tOp And BOttOm Swivel ACtiOn SimultAneOuSly.
aLL threads and taps are ips
smAll brAss hAng strAight swivEldegree OF Swivel 20°diAmeter 5/8"1/8F x 1/8FB4735 unFiniShed
gyrOmAtiC Swivel
1/8m tOp x 1/8F BOt.height 2-5/8”diAmeter 15/16”B518 eleCtriC BrASS
B519 eleCtriC ChrOme
1/8m tOp & BOttOm
B4730 eleCtriC BrASS
B4731 eleCtriC ChrOme
CAst brAss swivElwith solid brAss stud And kEyheight 1-11/16”length 1-1/2”
BOth hOleS tApped 1/8 ipSE5550
1/8F x 1/4FE6503
new deSign tO ACCOmdAte Spt 2 -wire
E5560
smAll brAss hAng strAight swivEldegree OF Swivel 20°ring nut tO SeAt 7/8”height 1-1/8”B517 1/4F x 1/4FB950 1/4F x 1/8F
solid brAssslottEd sCrEwOnly FitS B530b492
brAss swivEl with ButterFly knOB
diAmeter 1/2”height 1-5/16”1/8F x 1/8Fb530
brAss hAng strAight swivEldegree OF Swivel 25°ring nut tO SeAt 1-1/16”height 1-3/8”3/8F x 3/8Fb951
HA
RD
WA
RE
AC
CE
SS
OR
IES
P. 5
4beaded chain & accessories
bEAdEd bAll ChAin
250 Feet On A SpOOl
D710-11#6 Antique BrASS D710 #6 BrASS plAted D711 #6 niCkel plAted D712 #3 BrASS plAted
100 Feet On A SpOOl
D713 #6 BrASS plAted D714 #6 niCkel plAted
D4000 #6 Antique BrASS
D4001 #8 BrASS plAted
D4002 #8 niCkel plAted
D4003 #10 BrASS plAted
36” whitEpull string BrASS plAted end Bell And BrASS plAted #6 COnneCtOr
d709
End bEllsuSed FOr #3, #6, #8BeAded BAll ChAin Or
pull COrd D720 BrASS plAted
D721 niCkel plAted
stAndArd ChAin ConnECtorsD715-11#6 Antique BrASS D715 #6 BrASS plAted D716 #6 niCkel plAted D717 #3 BrASS plAted
D4010 #8 BrASS
D4011 #8 niCkel plAted
pull-ChAin bAll solid wood diAmeter 3/4”tOp SlipS #6 BAll ChAin
wAlnut FiniSh
b810
insulAting link length 1”FitS #6 And #3 ChAin
d730
solid brAss pull-ChAin bAllsdiAmeter 5/8”tOp SlipS #6 BAll ChAin
B811 unFiniShed B812 BurniShed & lACquered
fAn blAdE bAlAnCing kitb3060
“A” hookFOr #8 Or #10BAll ChAin
D706 yellOw BrASS
D707 niCkel plAted
(Chain shown, but not inCLuded)
HA
RD
WA
RE
PU
LL
-CH
AIN
SP. 55
Pull-chains
bEAdEd ChAin5” #6 BeAded ChAin
5/16” StOp BAll BrASS plAted withOut COnneCtOr b735
wood pull-ChAin knoblength 1-1/4” 11” BrASS plAted ChAin
And COnneCtOr B3020 wAlnut FiniSh
wood pull-ChAin knoblength 1-11/16"4.5” niCkel-plAted ChAin
And COnneCtOr B3035 wAlnut
wood pull-ChAin knoblength 1-11/16"7” niCkel-plAted ChAin
And COnneCtOr B3024 pewter
5” ChAinEttE tAssEls 4” BrASS plAted ChAin And COnneCtOr B801 gOld
B802 BlACk
B805 white
wood pull-ChAin knoblength 1-1/2"10" BrASS plAted ChAin
And COnneCtOr B3027 white
B3030 wAlnut
wood pull-ChAin knoblength 1-1/2"10" BrASS plAted ChAin
And COnneCtOr B3093 whitepull-ChAin knob
length 1-13/16"10" BrASS plAted ChAin
And COnneCtOr B3089 BrASS
wood pull-ChAin knoblength 1-1/2"10" BrASS plAted ChAin
And COnneCtOr B3031 white w/gOld BAnd
wood pull-ChAin knoblength 1-1/2"10" BrASS plAted ChAin
And COnneCtOr B3025 wAlnut
HA
RD
WA
RE
CH
AIN
P. 5
6
twO-FOOt lengthS
100 (2’) pieCeS per CASe r28 24 kArAt gOld plAted
One-yArd lengthS
100 (1 yArd) pieCeS per CASe
r6 Antique ruSt
r7 reAdy tO pAint
r10 unFiniShed Steel
r11 BrASS plAted
r12 COpper plAted
r13 niCkel plAted
r14 Antique niCkel
r15 Antique BrOnZe
r16 Antique BrASS highlight
r18 white
r19 BlACk
r20 FlOrentine
r22 Antique BrASS
r27 ChrOme plAted
r65 dArk BriCk
r66 Antique COpper
stAndArd ovAl ChAin8 gA. – 60 lB. teSt1-1/2” link length5/32” (3.8mm) link thiCkneSSSide-Cut
CuStOm ChAin FiniSheS
50 (1 yArd) per CASe
r270-53 SAtin niCkel
r270-62 ruBBed BrOnZe
stAndArd ovAl ChAin10 gA. - light weight 1-1/2” link length
1/8” (3.2mm) link thiCkneSS
Side-Cut
One-yArd lengthS
130 (1 yArd) per CASe
r1220 reAdy tO pAint
r30 BrASS plAted
r31 BlACk
r32 Antique BrASS
r35 niCkel plAted
r36 white
CuStOm ChAin FiniSheS
130 (1 yArd) per CASe
r261-43 Oil ruBBed BrOZe
r261-44 Oil BrOnZe
r261-53 SAtin niCkel
r261-62 ruBBed BrOnZe
mEdium ovAl ChAin1-1/8” link length
5/32” link thiCkneSS Side-Cut
One-yArd lengthS
100 (1 yArd) pieCeS per CASe
r48 BrASS plAted
r49 Antique BrASS
bAby ovAl ChAin3/4” link length
1/8” (3.2mm) link thiCkneSS
Side-Cut
One-yArd lengthS
200 (1 yArd) pieCeS per CASe
r45 BrASS plAted
r46 BlACk
r47 Antique BrASS
instaLLer Must use approved Chain pLiers for MaxiMuM safety.
steel chain
ADL DeLuxe MALLeAbLe Iron ChAIn
PLIers“The Very FinesT in Chain Pliers”easily OPens VirTually all Chain
(see Page 63)x25
HA
RD
WA
RE
CH
AIN
P. 57
hEAvy ovAl ChAin4 GA. – 100 Lb. Test1-1/2” link length
7/32” (5.5mm) link thiCkneSS
Side-Cut
One-yArd lengthS
60 (1 yArd) pieCeS per CASe
r59 reAdy tO pAint r60 BrASS plAted r61 BlACk r62 ChrOme plAted
r63 Antique BrASS
r67 SAtin niCkel/pewter r68 duSty BriCk
CuStOm ChAin FiniSheS
60 (1 yArd) pieCeS per CASe
r280-12 tuSCAn BrOnZe
r280-53 SAtin niCkel
r280-62 ruBBed BrOnZe
steel chain
gothiC ChAin10 gA. - medium duty
2” link length
9/64” (3.5mm) link thiCkneSS
Side-Cut
One-yArd lengthS
100 (1 yArd) pieCeS per CASe
r51 BrASS plAted r52 Antique BrASS
r53 BlACk
hEAvy ChAin2-1/4” link length
1/4” (6.2mm) link thiCkneSS
Side-Cut
One-yArd lengthS
40 (1 yArd) pieCeS per CASe
r90 BrASS plAted
EmbossEd ChAin10 gA. - medium duty
2” link length
1/8” (3.2mm) link thiCkneSS
Side-Cut
One-yArd lengthS
125 (1 yArd) pieCeS per CASe
r72 BrASS plAted with BlACk inlAy
EXtrA hEAvy ovAl ChAin2-1/2” link length
5/16” (7.8mm) link thiCkneSS
Side-Cut
One-yArd lengthS
25 (1 yArd) pieCeS per CASe
r91 BrASS plAted r92 ChrOme plAted
EmbossEd ChAinheAvy duty
2-1/8” link length
3/16” link thiCkneSS
Side-Cut
One-yArd lengthS
80 (1 yArd) pieCeS per CASe
r74 BrASS plAted with BlACk inlAy r75 BrASS plAted withOut BlACk inlAy
instaLLer Must use approved Chain pLiers for MaxiMuM safety.
HA
RD
WA
RE
CH
AIN
P. 5
8
solid brAssstAndArd ovAl ChAin 8 gA.1-1/2” link length
3/16” link thiCkneSS
Side-Cut
One-yArd lengthS
100 (1 yArd) pieCeS per CASe
r121
solid brAsshEAvy duty ovAl ChAin 4 gA.1-1/2” link length
7/32” link thiCkneSS
Side-Cut
One-yArd lengthS
60 (1 yArd) pieCeS per CASe
r141
solid brAssfiXturE ChAin reCtAngulAr link
3/4” x 1-3/4”Side-Cut
One-yArd lengthS
E5152
solid brAssrECtAngulArlink ChAin 1-5/8” x 3/4” linkS
Cut At 12 O’ClOCk pOSitiOn
One-FOOt lengthS
10 (1’) pieCeS per CASe
r250
unfinished solid brass chain
instaLLer Must use approved Chain pLiers for MaxiMuM safety.
solid brAss fiXturE ChAindeCOrAtive And SmAll
reCtAngulAr link
Side-Cut
19-1/4” lengthS
E5343
solid brAss fiXturE ChAindeCOrAtive And SmAll
reCtAngulAr link
Side-Cut
23” lengthS
E5344
solid brAss fiXturE ChAindeCOrAtive And SmAll
reCtAngulAr link
Side-Cut
32” lengthS
E5345
solid brAss fiXturE ChAindeCOrAtive And SmAll
reCtAngulAr link
Side-Cut
25-1/2” lengthS
E5349
HA
RD
WA
RE
CH
AIN
P. 59
solid brAssfiXturE ChAindeCOrAtive And SmAll reCtAngulAr link
Side-Cut
20” lengthS
E5346
solid brAssfiXturE ChAindeCOrAtive And SmAll
reCtAngulAr link
Side-Cut
20” lengthS
E5520
solid brAssfiXturE ChAin deCOrAtive And
reCtAngulAr link
Side-Cut
20-1/2” lengthS
E5348
solid brAssfiXturE ChAin deCOrAtive And reCtAngulAr link Side-Cut
20-3/4” lengthS
E5347
solid brAssfiXturE ChAin deCOrAtive And reCtAngulAr link Side-Cut
20-3/4” lengthS
E5472
solid brAssfiXturE ChAin deCOrAtive And reCtAngulAr link Side-Cut
20-3/4” lengthS
E5473
solid brAssfiXturE ChAin deCOrAtive And reCtAngulAr link Side-Cut
20-3/4” lengthS
E5474
unfinished solid brass chain
HA
RD
WA
RE
CH
AIN
P. 6
0
solid brAss hEAvysCissor linkOpenS At 12 O’ClOCk pOSitiOn
length 11-3/4”r1250
solid brAssfrEnCh ChAin
One-yArd lengthS
r1240
unfinished solid brass sPecialty chain
front viEw sidE viEw
HA
RD
WA
RE
CH
AIN
LIN
KS
P. 61chain and chain links
#18 solid brAss lAddEr ChAin*
50’ per BOx
r105 unFiniShed
solid brAss doublE jACk ChAin*
50’ per BOx
r102 unFiniShed
#16 singlE jACk ChAin*
SOlid BrASS
50’ per BOx
r111 unFiniShed
#12 stEElsinglE jACk ChAin*
ZinC plAted Steel
100’ per BOx
r114
#18 solid brAss singlE jACk ChAin*
50’ per BOx r110 unFiniShed
solid brAss9” ChAin link
10 pieCeS per CASe
e5150 unfiniSheD
solid brAss8-1/4” ChAin link
10 pieCeS per CASe
e5160 unFiniShed
* soLd by the foot.instaLLer Must use approved Chain pLiers for MaxiMuM safety.
HA
RD
WA
RE
LIN
KS
AN
D H
OO
KS
P. 6
2
300 lb. tEst5.8mm welded Steel ChAin
One-yArd lengthS
25 (1 yArd) pieCeS per CASe
r1200 BrASS plAted
r1201 ChrOme plAted
600 lb. tEst8mm welded Steel ChAin
One-yArd lengthS
25 (1 yArd) pieCeS per CASe
r1210 BrASS plAted
r1211 ChrOme plAted
welded chain & connecting links & hooks
ConnECting linkFOr 5.8mm welded Steel ChAin
r1204 ZinC plAted
r1205 BrASS plAted
r1206 ChrOme plAted
ConnECting link FOr 8mm welded Steel ChAin
r1218 BrASS plAted
r1219 ChrOme plAted
hEAvy “s” hook height 1-3/4”BrASS plAted*b782
stAndArd “s” hook height 1-1/4”BrASS plAted*b781
*brass barreL pLating is a MetaL pLating proCess where parts are LiteraLLy tuMbLed together in a barreL of Liquid pLating MateriaL. the resuLting finish is duLL rather than shiny.
light “s” hookheight 1”
BrASS plAted*b780
ZinC plAted Steel
b787
brAss plAtEd ring*B785 diAmeter 3/4”B786 diAmeter 1”
HA
RD
WA
RE
CH
AIN
SP. 63
individuAlly bAggEdStAndArd OvAl ChAin
8 gA. • 1 yArd per BAg
r119 Antique BrASS
r120 BrASS plAted
light wEight StAndArd OvAl ChAin By the SpOOl 11 gA. – light weight 150 Feet per SpOOl r1000 BrASS plAted
r1001 BlACk
r1002 Antique BrASS
r1003 white
stAndArd ovAl ChAin By the SpOOl 8 gA. – StAndArd weight 100 Feet per SpOOl r1111 BrASS plAted
r1112 Antique BrASS
r1113 white
Adl dEluXE mAllEAblE iron ChAin pliErs“the very FineSt in ChAin plierS”eASily OpenS virtuAlly All ChAin
COmeS with deluxe hAndle gripS
ApprOved
X25
1/4-20 CAblE hAnging kit4 FOOt - 1/16 Steel CABle
ChrOme plAted Ceiling
CABle COupler
1/4-20 AdjuStABle CABle gripper
1-1/2” wOOd SCrew
CABle rAted 50 lBS.k9716
10 foot - 1/16” stEEl CAblE with stop slEEvECABle rAted 50 lBS.k9717
1/8 ips CAblE hAnging kit4 FOOt - 1/16 Steel CABle
ChrOme plAted Ceiling
CABle COupler
1/8 ipS AdjuStABle CABle gripper
1-1/2” wOOd SCrew
CABle rAted 50 lBS.k9715
sPooled and bagged chain • chain Pliers
HA
RD
WA
RE
HO
OK
SP.
64
lArgE diE CAst hookSingle pACk pOly BAgged COmplete with hArdwAre diAmeter 1-5/8”height 2-1/4”K120 BrASS plAted K121 Antique BrASS
K122 white
diE CAst hook sEts doublE pACkEd 2 COmplete kitS with inStruCtiOnS
in durABle plAStiC BAg
One pieCe hOOk • #10-24 hArdwAre • hAnger BOlt Spring tOggle • running threAd Stud K101 BrASS plAted
K102 Antique BrASS
K104 BlACk
K107 white
diE CAst hookwith wirewAy
diAmeter 3/4”height 1-5/16”threAded 1/8 ipS mAle B955 Antique BrASS
spring togglE 3” • #10-24 threAd
b960
unFinished soLid Brass hooks
with wirEwAyheight 3/4” + threAd
diAmeter 3/4”threAded 1/8 ipS mAle
E828
tAp 1/8 ips height 1-1/8” • diAmeter 7/8”
with wirewAy
E826withOut wirewAy
E827
with wirEwAyheight 7/8” + threAd
diAmeter 7/8” threAded 1/8 ipS mAle
E825
with wirEwAyheight 1-3/4”diAmeter 1-5/8”tAp 1/8 ipS b745
swAg hookheight 1-3/4”diAmeter 1-1/2”tAp 1/8 ipS b744
hooks
“A” hookFOr #8 Or #10BAll ChAin
D706 yellOw BrASS
D707 niCkel plAted
(Chain shown, but not inCLuded)
HA
RD
WA
RE
KIT
SP. 65
4-7/8” plAin stEElroundEd CAnopy kitwith hArdwAre
K380 ChrOme plAted
K381 BrASS plAted
K382 SAtin BrASS
K383 Antique BrASS K384 BlACk
K387 white
3-1/2” stEEl bEAmCAnopy kitwith hArdwAre
K351 BrASS plAted
K352 SAtin BrASS
K353 Antique BrASS
4-7/8” stEEl EmbossEdCAnopy kitwith hArdwAre
K391 BrASS plAted
K392 SAtin BrASS
K393 Antique BrASS
K394 BlACk
K396 white
solid brAss pendAnt
1-9/16” junCtiOn BOx
ASSemBled with 2 lOOpS And wire COnneCtOrS
A645 pOliShed BrASS
stEEl sCrEw CollAr roundEd CAnopy kit1/8 ipS SCrew COllAr
lOOp And hArdwAre
K370 ChrOme plAted
K371 BrASS plAted K373 Antique BrASS K374 BlACk K377 white
kit ContAins:
• 21’ 18/2 Spt-2 pOwer COrd
• 18’ SwAg ChAin
• 2 SwAg hOOkS
• 2 tOggle BOltS
• 2 wOOd SCrewS
• 1 lOOp ASSemBly
· inCludeS
One lOOp
One 1” nipple
twO ruBBer wASherS
One FemAle BuShing
18’ FAn SwAg kit
10 gA. ChAin
J508 white
J509 pOliShed BrASS
canoPy and swag kits
HA
RD
WA
RE
CA
NO
PIE
SP.
66
CEntEr holE only CAnopydiAmeter 4-7/8” Center hOle SlipS 1/8 ipS e209 unFiniShed e212 white e215 BrASS plAted e222 Antique BrASS e226 BlACk
e229 ChrOme plAted
EmbossEd CAnopy diAmeter 4-7/8”Center hOle SlipS 1/8 ipS SCrew hOleS C. tO C. 2-3/4”e230 unFiniShed e231 BrASS plAted e233 Antique BrASS e235 BlACk e236 white e234 ChrOme plAted
sCrEw CollAr EmbossEd CAnopy diAmeter 5”1-1/16” Center hOle e237 BrASS plAted e238 Antique BrASS
sCrEw CollAr plAin roundEd CAnopy diAmeter 4-7/8”Center hOle 1-1/16”e256 unFiniShed e257 BrASS plAted e258 Antique BrASS e259 BlACk
e260 ChrOme plAted
e261 white
e6661 SAtin niCkel
e254 ruSt
stEEl CAnopydiAmeter 4-3/8 •depth 1-1/2” Center hOle – 1/8 ipSSCrew hOleS 2-3/4” C. tO C.e218 Antique BrASS
plAin roundEd CAnopy diAmeter 4-7/8”Center hOle SlipS 1/8 ipS SCrew hOleS 2-3/4” C. tO C.e210 unFiniShed e214 white e217 BrASS plAted e220 SAtin BrASS e223 Antique BrASS e224 BlACk e228 ChrOme plAted
e6655 SAtin niCkel
steel canoPies
HA
RD
WA
RE
CA
NO
PIE
SP. 67
roundEd CAnopy diAmeter 4-7/8 • Slip 1/8 ipS SCrew hOleS 2-3/4” C. tO C.e204 unFiniShed
solid brass canoPies
CEntEr holE EmbossEd CAnopy diAmeter 5”SlipS 1/8 ipS e207 unFiniShed
EmbossEd sCrEw CollAr CAnopy diAmeter 5”SlipS 1-1/16”e208 unFiniShed
EmbossEd CAnopy diAmeter 5” • SlipS 1/8 ipS SCrew hOleS 2-3/4” C. tO C.e275 unFiniShed e276 pOliShed & lACquered
CEntEr holE roundEd CAnopy diAmeter 5-1/8”SlipS 1/8 ipSe205 unFiniShed
roundEd sCrEw CollAr CAnopy diAmeter 5-1/8”
SlipS 1-1/16”e201 unfiniSheD
SlipS 1-1/16”e202 poliSheD&lAcquereD
SlipS 1-5/16”And r60 ChAin (4 gA.)e203 unfiniSheD
plAin sCrEw CollAr CAnopydiAmeter 5”Center hOle 1”e211 unFiniShed
HA
RD
WA
RE
CA
NO
PIE
SP.
68
swivel canoPies – sPecialty canoPies
earThquake CanoPyup tO 45° Angle • ideAl FOr vAulted CeilingS
(Stem nOt inCluded)
3/8 ips stEEl stEmthreAded 1” eACh end
A1650 12” unFiniShed
A1652 12” white
A1653 18” white
stEEl bEAm CAnopy Center hOle SlipS 1/8 ipSSCrew hOleS 2-3/4” C. tO C. diAmeter 3-1/2” • height 3/4”e240 unFiniShed e241 BrASS plAted e244 white e246 BlACk
hEAvy dutystEEl swivEl CAnopySwivel BAll tAp 3/8 ipS12” Stem @ 75 lB. mAximum
diAmeter 5-1/16”glOSS white
E286
stEEl swivEl CAnopySwivel BAll tAp 3/8 ipS12” Stem @ 75 lB. mAximum
diAmeter 5-1/16”glOSS white
E280
HA
RD
WA
RE
CA
NO
PIE
SP. 69
solid brass canoPies
CAnopy or wAll brACkEtheight 1-13/16” • diAmeter 5”Center hOle SlipS 1/8 ipSmOunting hOleS 2-3/4” C. tO C.e6600 pOliShed & lACquered
aLL sLip rings have a #8-32 set sCrew hoLe. set sCrews (b457) are soLd separateLy.
AntiquE stylE CAnopy diAmeter 5-1/8” • height 4”
3/4” Slip ring
e945 unFiniShed
e946 pOliShed
3/8” Center hOle Only
e6497 unFiniShed
e949 pOliShed
smAll stEEl hEAd sCrEw FOr CAnOpy Slip ringS #8-32 threAd
B457 BrASS plAted
AntiquE “bEE hivE” stylECAnopy smAlldiAmeter 4-1/16” • height 3-1/2”e944 pOliShed w/ 3/4” Slip ring
e947 pOliShed w/ 3/8” Center hOle
AntiquE “bEE hivE” stylE CAnopy lArgE diAmeter 4-7/8” • height 4”3/4” Slip ring
e942 unFiniShed
e943 pOliShed
sCrEw CollAr CAnopy diAmeter 5-1/4”Center hOle 1-1/16”unFiniShed
E206
HA
RD
WA
RE
CA
NO
PIE
SP.
70
canoPies
CAst brAss CAnopydiAmeter 6”height 1-3/4”Center hOle SlipS 1-13/32”pOliShed BrASS
E6662-10
CAst brAss CAnopydiAmeter 6”height 1-3/4”Center hOle SlipS 1-13/32”Antique BrASS
E6662-11
CAst brAss CAnopydiAmeter 6”height 1-3/4”Center hOle SlipS 1-13/32”SAtin niCkel
E6662-53
CAst brAss CAnopydiAmeter 6”height 1-3/4”Center hOle SlipS 1-13/32”ruBBed BrOnZe
E6662-62
CAst brAss sCrEw CollAr loop & ringBASe ring diAmeter 1-1/2” • height 1-9/16”heAvy duty with wirewAy
threAd FitS 1-3/32” CAnOpy hOle
ring SeAtS 1-13/32” CAnOpy hOle
e788 tAp 1/4 ipS unFiniShed
e788-10 tAp 1/4 ipS pOliShed BrASS
e788-11 tAp 1/4 ipS Antique BrASS
e788-53 tAp 1/4 ipS SAtin niCkel
e788-62 tAp 1/4 ipS ruBBed BrOnZe
HA
RD
WA
RE
CA
NO
PIE
SP. 71
canoPies
CAst brAss CAnopydiAmeter 5-1/2”height 1-5/8”Center hOle SlipS 1-13/32”pOliShed BrASS
E6663-10
CAst brAss CAnopydiAmeter 5-1/2”height 1-5/8”Center hOle SlipS 1-13/32”Antique BrASS
E6663-11
CAst brAss CAnopydiAmeter 5-1/2”height 1-5/8”Center hOle SlipS 1-13/32”SAtin niCkel
E6663-53
CAst brAss CAnopydiAmeter 5-1/2”height 1-5/8”Center hOle SlipS 1-13/32”ruBBed BrOnZe
E6663-62
e788CAST BRASS SCREW COLLAR
LOOP & RINGAPPLIES TO CANOPIES ON
PAGES 70 & 71.
HA
RD
WA
RE
PL
AT
ES
AN
D C
AN
OP
IES
P. 7
2
CAst brAss fAnCy 3-lOOp ChAin CAnOpy
diAmeter 5-1/4”Center hOle SlipS 1/8 ipSe5337 unFiniShed
poly-rEsin CAnopyunFiniShed
Center hOle SlipS 1”p205 6-1/2” diAm.p207 7-3/8” diAm.
ovAl stAmpEd brAss wAll plAtElength 6” • width 4-1/8”depth 1-1/4”withOut Center hOle
e368 pOliShed BrASS
e368-55 pOliShed niCkel
poly rEsin CAnopywidth 6”height 1-3/4”Center hOle SlipS 1”p2030 unFiniShed
poly rEsin CAnopywidth 5-1/2”height 1-5/8”Center hOle SlipS 1-1/16”p2032 unFiniShed
poly rEsin CAnopywidth 7”height 2”Center hOle SlipS 1”p2034 unFiniShed
poly rEsin CAnopywidth 9”height 2-5/16”Center hOle SlipS 1”p2036 unFiniShed
wall Plate and canoPies
HA
RD
WA
RE
CA
NO
PIE
SP. 73
CAst brAss CAnopydiAmeter 6” • height 1-3/4”
Center hOle SlipS 1”e5740 unFiniShed
Center hOle SlipS 1-13/32”e6662 unFiniShed
CASt BrASS CAnOpy
diAmeter 5-1/2” • height 1-5/8”
Center hOle SlipS 1-1/16”e5738 unFiniShed
Center hOle SlipS 1-13/32”e6663 unFiniShed
CAst brAss CAnopydiAmeter 7”height 2”SeAting AreA 1-3/4”Center hOle SlipS 1”e6124 pOliShed Only
CAst brAss CAnopydiAmeter 4-1/2”height 1-5/16”SeAting AreA 1-5/16”Center hOle SlipS 7/8”e6120 pOliShed Only
CAst brAss CAnopydiAmeter 9”height 2-5/16”SeAting AreA 2-1/4”Center hOle SlipS 1”e6128 pOliShed Only
cast brass canoPies
HA
RD
WA
RE
PIP
EP.
74
steel PiPe
unfinishEd stEEl pipEthreAded 1/8 ipS – 1” eACh end A409 4” A450 14-1/2”A410 4-1/2” A452 15”A412 5” A454 15-1/2”A414 5-1/2” A456 16”A416 6” A458 16-1/2”A418 6-1/2” A460 17”A420 7” A462 17-1/2”A422 7-1/2” A464 18”A424 8” A466 18-1/2”A426 8-1/2” A468 19”A428 9” A470 19-1/2”A430 9-1/2” A472 20”A432 10” A474 20-1/2”A434 10-1/2” A476 21”A436 11” A478 21-1/2”A438 11-1/2” A480 22”A440 12” A482 22-1/2”A442 12-1/2” A484 23”A444 13” A486 23-1/2”A446 13-1/2” A488 24”A448 14” A490 26”
brAss plAtEd pipEthreAded 1/8 ipS – 1” eACh end A270 4” A276 10”A271 5” A278 12”A272 6” A280 14"A274 8” A283 17"
ChromE plAtEd pipEthreAded 1/8 ipS – 1” eACh end
exCept FOr 2” (threAded 1/2” eACh end)A852 2” A858 8”A854 4” A860 10”A856 6” A862 12”
unfinishEd stEEl pipElength 6’ (withOut threAd)h61 1/8 ipS diAmeter – 3/8” h62 1/4 ipS diAmeter – 1/2”
AntiquE brAss finish Steel threAded pipe threAded 1/8 ipS – 1” eACh end A230 4” A234 8”A231 5” A236 10”A232 6” A238 12”
unfinishEd stEElFlOOr lAmp StemS threAded 1/4 ipS – 1” eACh end
A497 42”A498 46”A499 50”
AntiquE brAss finish Steel threAded pipe threAded 1/4 ipS – 1” eACh end
A250 4” A252 6” A254 8”
HA
RD
WA
RE
PIP
E A
ND
AR
MS
P. 75solid brass PiPe and arms
sAtin brAss pipE lACquered FiniSh
threAded 1/8 ipS (O.d. 3/8”)threAded 1/2” eACh end A112 2” A124 12”A113 2-1/2” A126 14”A114 3” A128 16”A116 4” A136 24”A117 5” A118 6” A120 8” A122 10”
unfinishEd brAss pipE threAded 1/4 ipS (O.d. 1/2”)threAded 1/4” eACh end A558 2” A569 14”A559 3” A567 16”A560 4” A570 18”A561 5” A572 20”A562 6” A574 22”A564 8” A576 24”A566 10” A578 36”A568 12”
unfinishEd brAss pipE threAded 1/8 ipS (O.d. 3/8”)threAded 1/2” eACh end A512 2” A526 14”A513 2-1/2” A528 16”A514 3” A530 18”A516 4” A532 20”A517 5” A534 22”A518 6” A536 24”A520 8” A540 30”A522 10” A542 36”A524 12”
brAss figurinE Arms threAded 1/8 ipS (O.d. 3/8”)threAded eACh end 1/2”
Arm SiZe OFFSet
10” – 18” 2-1/2”20” – 24” 3”
SAtin BrASS
with lACquered FiniSh
A201 10”A202 12” A208 24”
unFiniShed BrASS
A210 8” A215 18”A211 10” A216 20”A212 12”A213 14” A214 16”
sAtin brAss pipElACquErEd finishthreAded 1/4 ipS (O.d. 1/2”)threAded 1/4” eACh end A160 4” A166 10”A161 5” A168 12”A162 6” A170 18”A164 8”
sAtin brAss pipElACquErEd finishFOr AdjuStABle CluSter threAded 3/8” One end Only
threAded 1/8 ipS (O.d. 3/8”)A101 5”A102 7”A101-55pOliShed niCkel
A102-55pOliShed niCkel
HA
RD
WA
RE
AR
MS
P. 7
6
bEnt Arm unFiniShed BrASS 1-1/2” x 1-1/2”A175
bEnt Arm unFiniShed BrASS 1-3/4” x 1-3/4”A1700
bEnt Arm unFiniShed BrASS 2” x 2”A1702
bEnt Arm unFiniShed BrASS 1-3/4” x 3”A225
bEnt Arm unFiniShed BrASS 2” x 2-1/2”A176
bEnt Arm unFiniShed BrASS
1-1/2” x 5-1/8”A223
bEnt Arm unFiniShed BrASS 2-3/8” x 4-7/8”A222
bEnt Arm unFiniShed BrASS
2” x 7-1/4”A224
bEnt ArmSAtin BrASS
height 2-3/4”width 5”A180
brAss Armwidth 3-3/8”length OF threAdS 1/8” On StrAight end -3/8” On Curved end
A181 unFiniShed A182 SAtin BrASS
solid brass arms
typiCaL Length of thread eaCh end: 3/8” – 1/2”. thread is inCLuded in sizes
aLL arMs on this page are 1/8 ips (3/8” o.d.)
HA
RD
WA
RE
AR
MS
P. 77unfinished solid brass bent & Pin-uP arms
All ArmS On thiS pAge Are
1/8 ipS (3/8” O.d.).
ArmS Or StemS CAn Be mAde
tO yOur SpeCiFiCAtiOnS.Send in yOur diAgrAm with the
BendS And/Or threAding deSired. minimum 50 pieCeS.
“s” ArmunFiniShed BrASS width 5” • height 3-1/2”A189 withOut Arm BACk
“s” ArmunFiniShed BrASS
width 7-1/4” • height 3-1/4” A221
pin-up ArmunFiniShed BrASS
width 3-5/8” • height 1-3/4” A185
pin-up ArmunFiniShed BrASS
width 5” • height 2-3/4” A179
pin-up ArmunFiniShed BrASS
width 6” • height 3” A186
pin-up ArmunFiniShed BrASS
width 5-3/4” • height 2-1/4” A220
“s” ArmunFiniShed BrASS
width 9-1/2” • height 4” A188
typiCaL Length of thread eaCh end: 3/8” – 1/2”thread is inCLuded in sizes
HA
RD
WA
RE
SW
ING
AR
MS
P. 7
8
brAss swing ArmwAll mountEd 18” length when Fully extended
mOunting hOleS 1-1/2” C. tO C.All mOunting And end hOleS
tApped 1/8 ipSAll Other hOleS Are CApped And Slip 1/4 ipSA694 pOliShed & lACquered
brAss piAno Armlength 7”mOunting hOleS tApped 1/8 ipSA684 pOliShed & lACquered
strAight floor lAmp brAss swing Arm10” length when Fully extended
mOunting hOleS tApped 1/8 ipSCApped hOleS Slip 1/4 ipSA682 pOliShed & lACquered
solid brass swing arms
aLL arMs on this page have side and top hoLes tapped 1/8f ips (3/8” o.d.).
HA
RD
WA
RE
BO
DIE
SP. 79
solid brAss trOugh Arm hOlder All tApped 1/8 ipS 9” glASS Opening A926 pOliShed & lACquered
solid brAss 3-ArmCluSter BOdy
1/8 ipS • diAmeter 3-1/2”ArmS threAded 1/2”A658 pOliShed & lACquered A6658 unFiniShed
2-light “s” Arm ClustEr body diAmeter 2” • SpreAd 7” CAp (tOp) tAp 1/8 ipS BOdy (BOttOm) tAp 1/4 ipS ArmS Are threAded 1/8 ipS BOth endS
tOp CAp hAS Set SCrew
A673 BrASS plAted
A674 Antique BrASS plAted
solid brAss 2-light “s” Arm ClustEr body
ArmS threAded 1/4”
SpreAd 5-1/2”1/8 ipS tOp • 1/4 ipS BOttOm
A662 unFiniShed
A663 pOliShed & lACquered
A664 SAtin BrASS & lACquered
SpreAd 5-1/2”1/8 ipS tOp • 1/4 ipS BOttOm
A662 unFiniShed
A663 pOliShed & lACquered
A664 SAtin BrASS & lACquered
SpreAd 5-1/2”1/8 ipS tOp • 1/8 ipS BOttOm
A667 unFiniShed
A669 pOliShed & lACquered
A668 SAtin BrASS & lACquered
cluster bodies
aLL hoLes on swing arMs are tapped 1/8 ips unLess stated otherwise.
HA
RD
WA
RE
IND
EX
P. 8
0
AA10....................13A11....................13A12....................13A13....................13A14....................13A15....................13A16....................13A17....................13A18....................13A19....................13A20....................13A21....................13A23....................13A25....................13A27....................13A29....................13A31....................13A33....................13A35....................13A37....................13A39....................13A40....................13A41....................13A42....................13A43....................13A44....................13A45....................13A47....................13A50....................13A51....................13A53....................13A56....................13A58....................13A59....................13A60....................13A61....................13A64....................13A65....................13A66....................13A67....................13A68....................13A69....................13A74....................14A79....................14A80....................14A81....................14A83....................14A84....................14A85....................14A95....................13A96....................13A97....................13A99....................13
A101..................75A101-55.............75A102..................75A102-55.............75A112..................75A113..................75A114..................75A116..................75A117..................75A118..................75A120..................75A122..................75A124..................75A126..................75A128..................75A136..................75A160..................75A161..................75A162..................75A164..................75A166..................75A168..................75A170..................75A175..................76A176..................76A179..................77A180..................76A181..................76A182..................76A185..................77A186..................77A188..................77A189..................77A201..................75A202..................75A208..................75A210..................75A211..................75A212..................75A213..................75A214..................75A215..................75A216..................75A220..................77A221..................77A222..................76A223..................76A224..................76A225..................76A230..................74A231..................74A232..................74A234..................74A236..................74A238..................74
A250..................74A252..................74A254..................74A270..................74A271..................74A272..................74A274..................74A276..................74A278..................74A280..................74A283..................74A300............13,.14A301..................14A302..................13A303............13,.14A304............13,.14A306............13,.14A308..................14A309..................14A310............13,.14A409..................74A410..................74A412..................74A414..................74A416..................74A458..................74A418..................74A420..................74A422..................74A424..................74A426..................74A428..................74A430..................74A432..................74A434..................74A436..................74A438..................74A440..................74A442..................74A444..................74A446..................74A448..................74A450..................74A452..................74A454..................74A456..................74A458..................74A460..................74A462..................74A464..................74A466..................74A468..................74A470..................74A472..................74A474..................74
A476..................74A478..................74A480..................74A482..................74A484..................74A486..................74A488..................74A490..................74A497..................74A498..................74A499..................74A512..................75A513..................75A514..................75A516..................75A517..................75A518..................75A520..................75A522..................75A524..................75A526..................75A528..................75A530..................75A532..................75A534..................75A536..................75A540..................75A542..................75A558..................75A559..................75A560..................75A561..................75A562..................75A564..................75A566..................75A567..................75A568..................75A569..................75A570..................75A572..................75A574..................75A576..................75A578..................75A592..................50A593..................50A600..................50A601..................50A602..................50A603..................50A604..................50A630..................50A632..................50A633..................50A637..................50A638..................50
A639..................50A640..................50A641..................50A645..................65A658............50,.79A659..................50A660..................50A661..................50A662............50,.79A663............50,.79A664............50,.79A667............50,.79A668............50,.79A669............50,.79A673..................79A674..................79A682..................78A684..................78A694..................78A701..................21A705..................21A706..................21A708..................21A709..................21A710..................21A711..................21A712..................21A713..................21A714..................21A715..................21A716..................21A717..................21A718..................21A719..................21A720..................21A721..................21A722..................21A723..................21A724..................21A726..................22A727..................22A728..................22A729..................22A730..................22A731..................22A732..................22A733..................22A734..................22A735..................22A736..................22A737..................22A738..................22A739..................22A740..................22A741..................22
index
HA
RD
WA
RE
IND
EX
P. 81
A742..................22A753..................25A755..................25A756..................25A757..................21A758..................21A759..................21A766..................25A769..................21A770..................21A771..................22A773..................22A774..................22A775..................22A776..................22A777..................22A778..................22A779..................22A780..................22A783..................24A784..................24A785..................24A786..................22A787..................24A790..................23A792..................23A794..................23A852..................74A854..................74A856..................74A858..................74A860..................74A862..................74A908..................21A910..................21A911..................21A912..................21A913..................21A914..................21A915..................21A916..................21A918..................21A920..................21A926..................79A930..................21A931..................21A973..................22A974..................22A975..................22A976..................22A978..................22A979..................22A980..................22A1010................13A1011................13
A1012................13A1013................13A1014................13A1015................13A1017................13A1019................13A1021................13A1023................13A1025................13A1027................13A1029................13A1031................13A1033................13A1035................13A1037................13A1039................13A1040................13A1041................13A1042................13A1043................13A1047................13A1113................13A1115................13A1119................13A1123................13A1131................13A1211................14A1212................14A1213................14A1214................14A1219................14A1221................14A1223................14A1227................14A1231................14A1235................14A1511................13A1513................13A1515................13A1519................13A1523................13A1527................13A1613................14A1615................14A1619................14A1623................14A1627................14A1631................14A1635................14A1639................14A1641................14A1644................13A1645................13A1650................68A1652................68
A1653................68A1655................21A1700................76A1702................76A1900................50A1901................50A1902................50A1903................50A6588................50A6658................79
BB1........................4B2........................4B3........................4B4........................4B5........................4B6........................4B7........................4B8........................4B9........................4B10......................4B11......................4B12......................4B13......................4B14......................4B15......................4B16......................4B17......................5B18......................5B19......................5B20......................5B21......................5B22......................5B23......................5B24......................5B25......................5B26......................5B27......................5B28......................5B30......................4B31......................5B32......................5B33......................5B34......................5B35......................5B36......................5B37......................5B38......................5B39....................10B40....................10B41....................10B42....................10
B43....................10B44....................10B45....................10B46....................10B47....................10B48....................10B49....................10B50....................10B51....................10B52....................10B53....................10B54....................10B55....................10B56....................37B57....................37B58....................37B59....................37B60....................37B61....................37B62....................37B63....................37B64....................37B65....................37B66....................37B67....................37B68....................10B69....................10B70....................10B71....................10B73....................17B74..............10,.13B75..............10,.13B76....................16B77....................17B78....................16B79....................16B80....................16B81....................16B82..............10,.13B83....................16B84....................16B85....................16B86....................16B87....................16B88....................16B89....................17B90....................16B91....................16B92....................16B94....................16B95....................16B96....................16B97....................17B98....................17B99....................17
B100..................16B101....................9B102....................9B103....................9B104....................9B105....................9B106....................9B107....................9B108....................9B109....................9B111....................9B112....................9B113....................9B114....................9B115....................9B116....................9B117....................9B118....................9B119....................9B120....................9B121....................9B122....................9B123....................9B124....................9B125....................9B126....................9B127....................9B128....................9B129....................9B130....................9B131....................8B132....................8B133....................8B134....................8B135....................8B136....................8B137....................8B138....................8B139....................8B140....................8B141....................8B142....................8B143....................8B144....................8B145....................8B146....................8B147....................8B148....................8B149....................8B152....................7B153....................8B154....................8B155....................8B156....................8B157....................8
index
HA
RD
WA
RE
IND
EX
P. 8
2
B158....................8B159....................8B160....................8B163....................8B164....................8B165....................8B166....................8B167....................8B168....................8B169....................8B173..................28B174....................8B178....................7B179....................7B180....................8B181....................8B182....................8B183....................8B184....................8B185....................8B190....................4B191....................4B195....................4B196..................16B198....................4B199....................4B201..................18B203..................18B205..................18B207..................18B211..................18B213..................18B215..................18B217..................18B219..................18B222..................18B223..................18B225..................17B226..................17B227..................17B228..................17B231..................17B232..................17B233..................17B234..................17B238..................51B239..................51B242..................51B243..................51B245..................19B247..................19B249..................20B251..................20B253..................20B255..................20
B257..................20B260..................20B261..................19B262..................19B263..................20B265..................20B267..................19B269..................19B270..................19B271..................19B272..................37B273..................37B274..................18B275..................28B276..................28B277..................28B278..................28B279..................28B280..................28B283..................28B284..................28B287..................28B288..................28B289..................28B290..................28B291............26,.51B294............26,.51B295............26,.51B297..................51B298..................37B299..................37B316..................33B318..................33B319..................33B320..................34B321..................33B322..................33B323..................33B324..................33B325..................33B326..................33B327..................33B328..................33B329..................33B330..................33B331..................35B332..................35B333..................33B334..................33B336..................35B337..................35B338..................35B339..................34B340..................34B341..................35
B343..................34B345..................35B346..................35B347..................35B348..................27B349..................27B350..................27B353..................47B354..................47B355..................47B356..................47B357..................47B359..................47B360..................47B361..................47B362..................47B364..................37B365..................48B367..................48B369..................48B370..................47B371..................48B375..................48B376..................48B377..................48B378..................47B380..................47B381..................47B383..................47B384..................47B386..................35B387..................35B391..................35B392..................35B395..................28B399....................6B400....................6B401....................6B402....................6B403....................6B404....................6B405....................7B406....................6B408....................7B409....................7B410....................7B411....................7B412....................7B413....................7B414....................7B415....................7B417....................7B419....................7B420....................7B421....................7
B422....................7B423....................7B425....................7B426....................7B427....................7B428....................7B429....................7B430....................7B431....................7B432....................7B434....................7B436....................7B438....................7B440..................11B441..................11B443..................11B445..................11B446..................11B447..................11B448..................11B449..................11B450..................11B451..................11B452..................11B453..................11B454..................11B455..................11B456..................11B457........9,.11,.69B458..................11B459..................11B460..................12B461..................12B462..................12B463..................12B464..................12B465..................12B466..................12B467..................12B468..................12B469..................12B470............12,.24B471..................12B472..................12B473..................11B474..................11B475..................11B476..................11B477..................11B478..................36B479............11,.34B480..................36B481..................36B482..................36B485..................12
B486..................11B487..................12B488..................11B490..................11B491..................11B492..................53B498..................12B499..................36B500..................36B501..................36B502..................36B503..................36B504..................36B505..................36B506..................36B507..................52B508..................36B509..................36B510..................36B511..................36B512..................52B513..................52B514..................52B515..................52B516..................52B517..................53B518..................53B519..................53B520..................52B523..................52B527....................9B528....................9B529....................9B530..................53B531....................9B532....................9B534..................10B535..................26B559..................26B560..................26B561..................26B562..................26B565..................34B566..................34B567..................34B568..................34B569..................34B571..................36B574..................36B576..................34B577..................34B581..................26B582..................26B583..................26B584..................26
index
HA
RD
WA
RE
IND
EX
P. 83
B590..................15B594..................36B601..................15B602..................15B603..................15B604..................15B605..................15B607..................15B608..................15B609..................15B610..................15B611..................15B612..................15B613..................15B614..................15B615..................15B616..................15B619..................15B620..................15B622..................15B628..............2,.12B629..............2,.12B630....................2B636....................2B637....................2B638....................2B639....................2B642....................2B643....................2B644....................2B648..................27B650..................27B651..................27B658..................27B659..................27B662..................27B667..................35B673..................27B675..................27B683..................15B684..................34B692..................27B693..................27B697..................45B698..................35B700..................45B701..................45B703..................45B704..................45B705..................45B706..................45B708..................45B709..................45B710..................46B711..................46
B712..................46B713..................46B714..................46B715..................46B716..................46B717..................46B718..................46B719..................46B720..................46B723..................46B724..................46B726..................46B728..................46B735..................55B737..................46B738..................46B741..................44B744..................64B745..................64B751..................45B752..................45B753..................45B758..................45B759..................45B762..................45B765..................46B766..................46B768..................46B769..................46B780..................62B781..................62B782..................62B785..................62B786..................62B787..................62B795..................46B801..................55B802..................55B805..................55B810..................54B811..................54B812..................54B830..................13B831..................13B832..................28B835..................28B837..................28B838..................28B839..................28B840..................28B841..................28B842..................28B843..................28B844..................33B847..................34
B850..................33B851..................36B853..................28B859..................47B860..................47B861..................47B863..................47B864..................47B865..................47B866..................48B867..................48B868..................48B869..................48B870..................48B871..................48B880..................47B881..................47B882..................47B889..................33B890..................33B895..................33B896..................34B900..................16B901..................16B902..................16B903..................16B904..................16B910..................37B911..................37B912..................37B913..................37B914..................37B915..................37B918..................37B919..................35B920..................17B921..................18B930..................26B931..................26B932..................26B943..................36B944..................36B945..................36B946..................36B949..................52B950..................53B951..................53B952..................52B955..................64B960..................64B970..................47B971..................47B990..................10B999..................10B1000................10
B1002................10B1012................15B1015................16B1050................17B1100..................5B1102..................6B1106..................4B1108..................4B1120..................4B1126..............4,.5B1130..................6B1132..................4B1134..................4B1135..................5B1170..................2B1200................17B1210..........13,.17B1215..........13,.17B1225..................6B1230..................6B1240................51B1241................51B1242................51B1245................51B1250................51B1251................51B1252................51B1340................47B1367................49B1369................49B1370................49B1371................49B1372................49B1373................49B1374................49B1375................28B1380................28B1387................28B1390................49B1395................49B1399................49B1401..................6B1558................26B1599................35B1600................35B1605................35B1610................34B1611................33B1617................34B1620................34B1621................35B1624................35B1626................11B1630................11B1631................11
B1633................11B1634................48B1637................47B1638................48B1639................47B1641..................7B1642..................7B1643..................7B1644..................7B1645..................7B1646..................7B1647..................7B1650..................7B1663................27B1670................36B1671................36B1672................36B1700..................9B1701..................9B1702..................9B1703..................8B1710..................9B1711..................9B1712..................9B1713..................9B1714..................9B1715..................9B1716..................9B1729..................8B1730..................8B1731..................8B1732..................8B1733..................8B1734..................8B1735..................8B1736..................8B1737..................8B1739..................8B1740................46B1780................15B1785................15B1856................13B1858................13B1880................52B1881................52B1882................52B1907................51B1908................51B1910................51B1915................51B1918................51B2010................17B3005................10B3020................55B3024................55
index
HA
RD
WA
RE
IND
EX
P. 8
4
B3025................55B3027................55B3030................55B3031................55B3060................54B3089................55B3093................55B3609................15B3729................15B3760..................7B3770................37B3799..................8B3800..........26,.51B3810..........26,.51B3815..........26,.51B3819..................6B3820................11B3821................11B3822................11B3823................12B3825................15B3826................33B3828..................8B3831..................8B3832..................8B3833..................8B3834..................8B3835..................8B3999................15B4529................11B4535................11B4538................11B4635..................2B4700................34B4701................34B4705................34B4710................34B4730................53B4731................53B4735................53B5010..................6B5022..................5B5029..................5B5040..................6B5041................46B5042................46B5080................34B5522................52B5523................52B6400..................3B6402..................3B6404..................3B6406..................3B6408..................3B6410..................3
B8803................25B8804................25B9470................36B9480................36B9482................36B9499................36
DD706............54,.64D707............54,.64D709..................54D710..................54D711..................54D712..................54D713..................54D714..................54D715..................54D715-11.............54D716..................54D717..................54D720..................54D721..................54D730..................54D2650................15D2655................15D4000................54D4001................54D4002................54D4003................54D4010................54D4011................54
EE201...................67E202...................67E203...................67E204...................67E205...................67E206...................69E207...................67E208...................67E209...................66E210...................66E211...................67E212...................66E214...................66E215...................66E217...................66E218...................66E220...................66E222...................66
E223...................66E224...................66E226...................66E228...................66E229...................66E230...................66E231...................66E233...................66E234...................66E235...................66E236...................66E237...................66E238...................66E240...................68E241...................68E244...................68E246...................68E254...................66E256...................66E257...................66E258...................66E259...................66E260...................66E261...................66E275...................67E276...................67E280...................68E286...................68E368...................72E368-55..............72E730...................41E731...................41E732...................41E771...................38E773...................38E776...................38E783...................40E784...................40E785...................40E786...................40E788.......40,.70,.71E789...................40E793...................38E794...................38E795...................40E796...................40E797...................40E798...................40E799...................39E800...................39E809...................39E813...................38E814...................41E816...................38E818...................38
E819...................38E825...................64E826...................64E827...................64E828...................64E829...................38E836...................39E837...................39E838...................39E839...................39E850...................38E852...................39E853...................38E854...................38E855...................38E859...................39E942...................69E943...................69E944...................69E945...................69E946...................69E947...................69E949...................69E5020.................41E5021.................42E5022.................42E5023.................42E5024.................42E5025.................42E5026.................43E5027.................43E5028.................43E5029.................43E5030.................43E5141.................40E5142.................44E5150.................61E5152.................58E5160.................61E5301.................44E5302.................45E5337.................72E5343.................58E5344.................58E5345.................58E5346.................59E5347.................59E5348.................59E5349.................58E5472.................59E5473.................59E5474.................59E5520.................59E5540.................45E5550.................53
E5738.................73E5740.................73E5743.................40E5746.................40E6120.................73E6124.................73E6128.................73E6497.................69E6503.................53E6600.................69E6655.................66E6660.................40E6661.................66E6662.................73E6662-10............70E6662-11............70E6662-53............70E6662-62............70E6663.................73E6663-10............71E6663-11............71E6663-53............71E6663-62............71
HH61....................74H62....................74
JJ508...................65J509...................65
KK101..................64K102..................64K104..................64K107..................64K120..................64K121..................64K122..................64K351..................65K352..................65K353..................65K370..................65K371..................65K373..................65K374..................65K377..................65K380..................65
index
HA
RD
WA
RE
IND
EX
P. 85
K381..................65K382..................65K383..................65K384..................65K387..................65K391..................65K392..................65K393..................65K394..................65K396..................65K9715................63K9716................63K9717................63
PP205..................72P207..................72P2030................72P2032................72P2034................72P2036................72
RR6 ........................ 56R7......................56R10....................56R11....................56R12....................56R13....................56R14....................56R15....................56R16....................56R18....................56R19....................56
R20....................56R22....................56R27....................56R28....................56R30....................56R31....................56R32....................56R35....................56R36....................56R45....................56R46....................56R47....................56R48....................56R49....................56R51....................57R52....................57R53....................57R59....................57R60....................57R61....................57R62....................57R63....................57R65....................56R66....................56R67....................57R68....................57R72....................57R74....................57R75....................57R90....................57R91....................57R92....................57R102..................61R105..................61R110..................61R111..................61R114..................61R119..................63R120..................63
R121..................58R141..................58R250..................58R261-43.............56R261-44.............56R261-53.............56R261-62.............56R270-53.............56R270-62.............56R280-12.............57R280-53.............57R280-62.............57R1000................63R1001................63R1002................63R1003................63R1111................63R1112................63R1113................63R1200................62R1201................62R1204................62R1205................62R1206................62R1210................62R1211................62R1218................62R1219................62R1220................56R1240................60R1250................60
VV27....................24V80....................25V81....................25V82....................25
WW1003...............29W1006...............29W1007...............29W1019...............29W1023...............29W1026...............29W1035...............29W1035-53..........30W1036...............29W1044...............29W1045...............29W1048...............29W1049...............29W1050...............30W1051...............30W1052...............30W1053...............30W1091...............29W1110...............30W1111...............30W1112...............30W1160...............31W1175...............29W1185...............31W1187...............31W1190...............31W1282...............31W1283...............31W1287...............31W1288...............31W1700...............30W2550...............32W2555...............32W2560...............32W2565...............32W2570...............32W2575...............32
W3000...............32W3001...............32W7101...............30
XX25..............56,.63
index
HA
RD
WA
RE
INF
OR
MA
TIO
N A
ND
PO
LIC
YP.
86
gEnErAl informAtion And poliCyordEring:.Please.state.the.quantity,.part.number.and.description.of.each.item,.preferably.in.that.order,.to.avoid.any.delays.and.help.speed.up.the.processing.of.your.order..Whenever.possible,.always.order.by.standard.carton.packs..This.will.speed.up.the.processing.of.your.order.as.well.as.give.you.the.benefit.of.the.quantity.pricing.and.packaging.
CountEr sErviCE:.Customers.are.welcome.to.visit.our.California.showroom.where.overstocks,.close-outs,.and.new.items.are.available..Orders.for.will-call.must.be.phoned.in.a.minimum.of.3.hours.in.advance.in.order.to.avoid.a.long.waiting.period.once.you.arrive.
hArd to find pArts:.We.will.be.happy.to.try.to.locate.any.item.not.in.our.catalog..We.have.access.to.the.best.manufacturers,.both.foreign.and.domestic..There.is.a.$75.00.minimum.per.order..Please.ask.for.our.special order Department .
priCEs:.Prices.quoted.are.F.O.B..our.warehouse.and.are.subject.to.change.without.notice..All.prices.are.subject.to.State.and.Federal.taxes..State.Sales.Tax.will.be.added.to.all.orders.unless.an.up-to-date.resale.card.is.on.file.
minimum ChArgE:.There.is.an.additional.service.charge.of.$20.00.(handling.and.billing.costs).for.any.order.which.is.less.than.$50.00.
stoCk itEms:.Illustrations.are.for.identification.purposes.only.and.do.not.necessarily.represent.the.product.of.a.specific.manufacturer.
bACk ordErs:.All.items.not.shipped.are.automatically.placed.on.back.order..If.you.do.not.wish.to.receive.back.orders,.please.notify.us.and..your.request.will.become.part.of.your.file..We.will.FAX.to.you.any.available.back.orders.that.we.are.able.to.ship..Please.indicate.which.items.you.still.require.and.fax.the.worksheet.back.to.us.for.immediate.processing.(All.back.orders.are.filled.on.a.first-come,.first-served.basis.so.please.respond.quickly.)
shipmEnts:.Please.advise.us.as.to.how.you.prefer.shipment..If.no.instructions.are.received.we.will.use.our.best.judgement..(See.inside.back.cover.for.complete.shipping.policy.)
pErformAnCE:.We.will.endeavor.to.meet.all.shipping.schedules;.however,.in.no.event.shall.ADL.pay.any.amount,.whether.identified.as.a.penalty.or.as.liquidated.damages,.for.failure.to.meet.a.shipping.schedule.
ClAims:.All.claims.for.defective.merchandise.must.be.made.within.5.days.of.receipt.of.the.order..No.returns.will.be.accepted.without.verbal.or.written.permission.in.which.an.rgA.(Return.Good.Authorization).Number.will.be.issued..This.RGA#.is.valid.for.30.days.only.and.must.be..clearly.marked.on.each.carton.to.be.returned..An.itemized.list.of.the.merchandise.and.the.original.invoice.number.must.accompany.all.returns..An.RGA#.must.be.obtained.before.any.Counter.Service.return.is.accepted.
rEturn poliCy:.To.return.defective,.broken.or.damaged.merchandise,.please.see.ClAims,.above...For.all.items.that.have.been.picked.and.sent.in.error,.please.see.ClAims,.above..The.return.of.items.that.are.shown.in.your.catalog.will.only.be.accepted.within.30.days.of.invoice..Within.the.30.day.period,.you.must.obtain.an.RGA#,.either.verbally.or.in.writing..the.RGA#.is.valid.for.30.days,.without.exception..Returns.will.be.accepted.ONLY.with.valid.RGA#s.clearly.marked.on.the.outside.of.the.box..Returns.that.are.not.clearly.marked.on.the.outside.of.the.box.will.be.refused.and.sent.back.to.the.sender,.at.their.expense..Any.RGA.request.for.a.single.item.that.is.valued.at.greater.than.$500.is.subject.to.an.overstock.review..Management.reserves.the.right.to.deny.any.RGA.based.on.the.overstock.review..Special.orders.are.not.returnable..We.can.only.exchange.defective.special.order.merchandise,.with.applicable.
rEstoCking ChArgE:.There.will.be.a.25%.restocking.charge,.with.a.$50.00.minimum,.for.all.merchandise.returned.unless.the.reason.for.the.return.was.the.fault.of.ADL..Non-stock.items.are.not.subject.to.return..Currently.stocked.items.must.be.returned.within 30 dAys..Merchandise.will.not.be.accepted.for.return.if.it.will.create.an.overstock.position..See.ClAims.above.for.details.
tErms:.Open.account.terms.are.NET.30.DAYS.from.date.of.invoice.
frEight AllowAnCE:.Orders.of.$1,500.00,.or.higher,.will.be.shipped.Freight.Allowed.to.a.single.destination..All.qualifying.orders.will.be.shipped.pre-paid.by.our.selected.carriers..This.allowance.is.granted.provided.the.invoice.is.paid.in.full.within.the.terms.indicated.on.the.invoice..All.goods,.for.delivery.within.the.Continental.U.S.A.,.are.shipped.from.Luminance’s.Distribution.centers..Luminance.reserves.the.right.to.change.the.freight.policy.on.an.individual.account.basis.if.term.and.payment.obligations.are.not.fulfilled..We.will.pass.on.any.special.carrier.handling.charges.such.as.inside.delivery.fees,.re-delivery.charges,.residential.delivery.fees,.lift.gate.services,.C.O.D..Fees,.Etc..If.your.invoice.is.$500.00.or.more,.you.may.deduct.the.freight.bill.or.5%.from.invoice,.whichever.is.less,.provided.the.invoice.is.paid.within.30.days..This.applies.to.merchandise.on.hand.at.time.of.shipment.only.
pAst duE ACCounts:.No.orders.will.be.shipped.until.all.overdue.balances.are.cleared..Overdue.accounts.are.subject.to.a.1.5%.per.month.finance.charge.
CrEdit:.Credit.may.be.extended.to.a.firm.or.individual.only.after.submitting.satisfactory.trade.and.bank.references.including.addresses,phone.and.account.numbers.where.applicable..All.information.must.be.furnished.in.writing.and.signed.by.an.authorized.person.
CrEdit CArds:.For.your.convenience.we.now.accept.VISA,.MASTER.CARD.and.DISCOVER.for.all.orders..A.2%.bank.charge.or.$5.00,whichever.is.less,.will.be.applied.to.each.transaction.
rEturnEd ChECks:.A.$50.00.service.charge.will.be.placed.on.all.checks.returned.to.us.by.the.bank.for.non-payment..Once.a.check.hasbeen.returned.to.us.for.non-payment,.we.will.no.longer.honor.checks.from.that.individual.or.firm.
initiAl ordErs:.Unless.a.credit.application.has.been.received,.processed.and.approved,.all.initial.orders.will.only.be.shipped.whenprepaid.by.credit.card.(VISA,.MASTER.CARD.or.DISCOVER).or.paid.in.advance.prior.to.shipment.of.merchandise..SEE.INSIDE.BACK.COVER.FOR.FREIGHT.POLICY
Adl ADiviSionofluminAnce1945 s tubeway Avenue, Commerce, CA 90040
American-De Rosa now operating as ADL
HOURS:.MONDAY.THRU.FRIDAY.-.8:00.AM.TO.4:30.PM.(PST)CUSTOMER.SERVICE:.MONDAY.THRU.FRIDAY.-.7:00.AM.TO.5:00.PM.(PST)
www.luminance.us.com
HA
RD
WA
RE
FR
EIG
HT
PO
LIC
YP. 87
frEight poliCy
brEAkAgE or dAmAgE: DO.NOT.REFUSE.TO.ACCEPT.ANY.SHIPMENT.UNDER.ANY.CIRCUMSTANCES,.AS.THE.FREIGHT.COMPANY,.U.P.S..OR.FEDEX.GROUND.WILL.CHARGE.YOU.FOR.THE.SHIPMENT.BOTH.WAYS.
rEfusEd shipmEnts:.Any.Shipment.that.is.refused.in.whole.or.in.part.will.result.in.a.30%.restocking.charge.as.well.as.freight.charges.both.ways..NO.EXCEPTIONS
CArriEr:.If.you.desire.a.specific.carrier,.please.state.this.when.placing.your.order..If.no.request.is.made,.we.will.ship.using.our.best.judgement.
shipmEnts by u.p.s. or fEdEX ground:.If.merchandise.is.received.damaged.or.with.shortages.proceed.as.follows:. 1).Receive.the.shipment..Do.not.refuse.the.shipment,.as.you.will.be.billed.for.the.freight.both.ways.. 2).Note.all.damage.on.the.receipt.and.have.the.driver.initial.this.before.you.sign.the.receipt.. 3).Do.not.remove.any.damaged.merchandise.from.the.original.carton.until.an.inspection.has.been.made.or.waived.by.. U.P.S..or.FedEx.Ground.. 4).Contact.your.local.U.P.S..or.FedEx.Ground.Customer.Service.and.follow.their.instructions.. 5).Notify.ADL.referencing.your.invoice.number..Once.we.receive.the.pertinent.information.from.U.P.S..or.FEDEX.GROUND,.we.will... issue.a.credit.to.your.account.
shipmEnts by motor frEight:.ADL.carries.good.quality.merchandise.properly.packed.by.professional.packers..Our.responsibility.. .. for.your.order.ceases.once.we.turn.it.over,.in.good.condition,.to.the.freight.carrier..If.you.receive.your.order.with.damage.or.shortages.. .. of.merchandise.proceed.as.follows:. 1).Receive.the.shipment..Do.not.refuse.the.shipment.as.this.will.only.bring.about.storage.or.re-delivery.charges.for.which.. you.will.be.responsible.. 2).inspect the shipment for damage and correct count prior to signing the receipt.. 3).if any damage is visible, open the package and examine the extent of damages before signing the receipt.. 4).the driver must note all damaged cartons and/or shortages on the bill of lading and/or delivery receipt before you sign for the shipment..Failure.to.follow.these.instructions.will.result.in.a.loss.of.claim.. 5).File.a.claim.with.the.freight.company.to.replace.or.reimburse.your.company.for.any.damage.or.shortages..We.will.help.you.to.file... your.claim.if.necessary..Our.willingness.to.help.does.not.constitute.a.transfer.of.any.responsibility.from.you.to.us.
FREIGHT.COMPANIES.DO.NOT.ACCEPT.SHIPMENTS.WHICH.ARE.POORLY.PACKED.OR.EVENAPPEAR.DAMAGED..WE.WILL.ABSOLUTELY.NOT.ACCEPT.ANY.RESPONSIBILITY
FOR.ANY.PORTION.OF.ANY.TRANSPORTATION.LOSS.OR.DAMAGE.CLAIM.
pACking:.All.shipments.are.carefully.packed.and.checked.by.experienced.professional.packers..Due.to.the.structural.sensitivity.of.All glass shades 13 or larger.in.diameter,.we.must.ship.them.by.motor.freight.only.if you request shipment by u.p.s. or fedEx ground, it is done so at your own risk and expense..Please.note:.the.additional.packaging.. . .required.for.these.products.usually.creates.an.oversize.carton..Transportation.costs.of.oversize.cartons.are.significantly.higher..Please.take.. .this.into.consideration.when.requesting.U.P.S..or.FedEx.Ground.shipments.
EXClusion of wArrAntiEs / limitEd wArrAnty:.The.Seller.warrants.its.title.to.the.products.sold.by.it.and.warrants.to.the.. Purchaser.that.its.products.are.free.of.defects.of.workmanship.or.material.and.are.in.conformity.with.applicable.specifications.and.. descriptions.referred.to.or.set.out.herein..the foregoing warranties are the only warranties applicable to purchases. All other warranties, express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are disclaimed..The.Seller.does.not.warrant.that.its.products.will.meet.or.comply.with.the.requirements.of.any.safety.code.or... regulation.of.any.state,.municipality,.or.other.jurisdiction..If.any.sample.or.model.was.shown.to.the.Purchaser,.such.sample.or.model... was.used.merely.to.illustrate.the.general.type.and.quality.of.the.products.and.not.to.represent.that.the.products.would.necessarily.con.. form.to.the.sample.or.model.
limitAtion of liAbility:.It.is.understood.and.agreed.that.the.Seller’s.liability.whether.in.contract,.in.tort,.under.any.warranty.set.forth... herein,.in.negligence,.or.otherwise.shall.not.exceed.the.return.of.the.amount.of.the.purchase.price.paid.by.the.Purchaser,.or,.at.the... option.of.the.Seller,.in.the.Seller’s.sole.discretion,.the.replacement.or.repair.of.the.product.or.part.concerned.(F.O.B..the.Seller’s... factory.or.such.other.place.as.the.Seller.may.designate),.and.under.no.circumstances.shall.the.Seller.be.liable.for.special,.indirect,.or... consequential.damages..The.price.stated.for.the.product.is.a.consideration.in.limiting.the.Seller’s.liability..no action, regardless ofform, shall be maintained hereunder unless the facts giving rise to it are discovered within 12 months of shipment and written notice hereof given to seller within 30 days of discovery..Products.which.are.replaced.by.Seller.in.accordance.with.foregoing.shall.become.the.. property.of.Seller.and.shall.be.returned.to.it.by.the.Purchaser.F.O.B..point.of.shipment.
vEndEE AgrEEs.that.all.sales.transactions.shall.be.considered.to.have.been.made.in.the.State.of.California.and.shall.be.interpreted.in.accor-dance.with.the.laws.and.regulations.of.the.State.of.California..Purchaser.agrees.to.California.jurisdiction.in.any.action,.suit.or.proceeding.arising.out.of.this.sales.transaction.and.concedes.that.it,.and.each.of.them,.transacted.business.in.the.State.of.California..In.the.event.legal.action.is.com-menced.between.the.parties.hereto,.Purchaser.agrees.that.venue.shall.be.laid.in.Los.Angeles.County,.California..VENDEE.shall.have.no.liability.whatsoever.for.any.direct.or.indirect,.special.or.consequential.damages.relating.in.any.way.to.the.products.sold.by.Vendee..Vendee’s.sole.liability.shall.be.limited.to.the.repair.or.replacement.of.any.defective.products.
© 2011 ADlADiviSionofluminAnceAmerican-De Rosa now operating as ADL
Reproduction.of.all,.or.any.part.of.this.catalog.without.the.express.written.permission.of.ADL.is.Strictly.Forbidden