The Principle of Homogenisation The unhomogenised product enters the valve area at high pressure and low velocity. As the product enters the adjustable, close clearance area between the valve and the seat, there is a rapid increase in velocity with a corresponding decrease in pressure. The intense energy release causes turbulence and localised pressure differences, which tear apart the particles. The homogenised product impinges on the impact ring and exits at a pressure sufficient for the next processing stage.
DAIRY PRODUCTSMilkYoghurtIce CreamCreamCheeseDessert
FOOD AND BEVERAGEFruit JuicesKetchup / Tomato PasteBaby FoodsPeanut / Hazelnut PasteHoney / ChocolateTahina
COSMETICSHair ProductsSkin CreamsLipsticksLotionsShampoosNail Polishes
PHARMACEUTICALSAntibioticsCreamsAntacidsTablet CoatingsLiposomesOintments
CHEMICALSPaintDetergentsSoapWaxesLubrication OilParaffin Emulsions
BIOTECHNOLOGYProteinsYeastVitaminsBacteriaEnzymesViruses
ROKK 2 Series homogenisers / piston pumps are available with capacities from 100 – 300 litre / hour as no stage, one stage or double stage depending on application.
The ROKK 2 Series high pressure homogenisers and piston pumps have excellent performance and reliability in the latest design concept.
Application Fields
2 Series
Homogenised product
Impact ring
Seat
Valve
Feed
MonoBlockThe MonoBlock (compression head) is manufactured out of a high tensile, corrosion resistant, forged, ultra-high quality stainless steel and checked for imperfections using ultrasound equipment. The compression head for sanitary applications provides an in-line flow pattern and minimises the number of sealed areas. The semi-spherical valves system allows smooth machine operation, for both low and high viscosity products.
Manufacturing Location
www.rokk-processing.com
ROKK Processing Ltd Wolvey Lodge Business Centre, Cloudsley Bush Lane, Wolvey, Leicestershire, LE10 3HB, England
T. +44 (0)1455 220 179
F. +44 (0)1455 221 314
Machine Features• Designed according to the EU safety rules (CE standards)• Engineered, manufactured and tested according to ISO EN 9001 Quality System• Engineered and designed for easy maintenance and cleaning (CIP and SIP)• Suitable for abrasive and viscous products• Ceramic coated stainless steel plungers• Cobalt carbide material suction and delivery valves & valve seats• Tungsten Carbide homogenising valves• Compression Monoblock head formed by single forged block in special stainless steel• Automatic homogenisation pressure controller with manual adjustment• Stainless steel construction (Frame) and electrical panel board• Less footprint with ergonomic design• Sanitary design analogue diaphragm high pressure gauge• V belts drive train and gearbox speed reduction unit• AC motor drive
2 Series
Technical Features
Number of Plungers
Weight
3
225 kg.
30 l/h
Lubrication Oil ISO VG 150
Gearreducer Oil ISO VG 320
3,5 l
0,4 l
Motor Power 2,2 kW
241
652
570
276
.50
485
.50
675
98.
50
620 58.50
788
936
116.50
1052.50
Water Consumption