www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
1
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Anti-Vibration MountsA complete range of solutions to structure-borne noise and vibration
2
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
2
Speed, Deflection and Isolation Diagram
0.5 0.75 1.0 1.5 2 3 4 5 6 7 8 12 16 24 32 48 64
Static deflection in mm
Resonance – area to be avoided
4000
3600
3200
2800
2400
2000
1800
1600
1400
1200
1000
900
800
700
600
500
450
400
350
300
250
225
200
175
150
125
98 % 34dB
50 %70 %
80 %85 %
90 %
95 %
97 %98 %
0 %
97 % 30dB
95 % 26dB
90 % 20dB
85 % 16dB
80 % 14dB
70 % 10dB
50 % 6dB
0 %
Deg
ree
of is
olat
ion
Red
uctio
n
RPM
RPM
= 6
0 x
Dis
turb
ing
Freq
uenc
y, H
z
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
3
Example 1
A fan is mounted on a steel frame with a total weight of 360kg. The fan runs at 1400rpm and a degree of isolation of 85% is required.
According to the diagram to the right this will require a static deflection of 3.5mm.
A type AD vibration isolator would be suitable in this case. When the fan is placed on 4 vibration isolators, each supporting a load of 90kg will give a deflection of 3.5mm.
This graph show that 4 of the AD 5035 WHITE absorbers can be used here.
Example 2
A motor weighing 640kg, running at 2800rpm, is driving a machine weighing 2210kg running at 1200rpm. The task is to reduce the amount of force transferred to 20% of the disturbing force.
The motor and machine are fixed to a base frame with a mass of 1680kg, which gives a total mass of 4530kg.
The base frame has 4 supporting points and it can be calculated that the load on each point respectively is 350kg, 520kg, 2200kg and 1460kg.
As the graph shows, an 80% degree of isolation, (which corresponds to 20% of the disturbing force), at 1200rpm, (the design must follow the unit with the lowest rpm, as explained above), requires a deflection of 3.7mm. As the load is unevenly distributed, various vibration isolators need to be used. The graphs below describe VIKAS SANDWICH mounts, and show that one WHITE 200, one RED 200, one BLACK 400 and one RED 500 can be used in this situation.
0 1 2 3 4 5mm
kg1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5mm
kg2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5mm
kg4000
3000
2000
1000
0
SANDWICH 500
Calculate Your Vibration Isolation
0.5 0.75 1.0 1.5 2 3 4 5 6 7 8 12 16 24 32 48 64
Static deflection in mm
4000
3600
3200
2800
2400
2000
1800
1600
1400
1200
1000
900
800
700
600
500
450
400
350
300
250
225
200
175
150
125
98 % 34dB
97 % 30dB
95 % 26dB
90 % 20dB
85 % 16dB
80 % 14dB
70 % 10dB
50 % 6dB
0 %
Deg
ree
of is
olat
ion
Red
uctio
n
O/min.
RPM
= 6
0 x
Dis
turb
ing
Freq
uenc
y
4000
3600
3200
2800
2400
2000
1800
1600
1400
1200
1000
900
800
700
600
500
450
400
350
300
250
225
200
175
150
125
98 % 34 dB
50 %70 %
80 %85 %
90 %
95 %
97 %98 %
0 %
97 % 30 dB
95 % 26 dB
90 % 20 dB
85 % 16 dB
80 % 14 dB
70 % 10 dB
50 % 6 dB
0 %
Deg
ree
of is
olat
ion
Red
uctio
n
O/min.
RPM
= 6
0 x
Dis
turb
ing
Freq
uenc
y
Resonance – area to be avoided
0.5 0.75 1.0 1,5 2 3 4 5 6 7 8 12 16 24 32 48 64
Static deflection in mm
Resonance – area to be avoided
50 %70 %
80 %85 %
90 %
95 %
97 %98 %
0 %
0 1 2 3 4mm
kg160
120
80
40
0
AD 5035
4
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
4
Technical information
Cylindrical rubber mounts: AD, RAD
Cylindrical rubber mounts: SDA, SDB, SDC, SDD, SDE
Machine isolators: ADF, ADM, ADP, RADF, RADM, RADP
Rubber buffers: GB
Polyetherurethane (PUR) Buffers: PB
Rubber turret mounts: FA
Rubber turret mounts: SD 4343
Rubber turret mounts: FAV
Round Cone Mounts: DRD
Round Cone Mounts: DSD
Sandwich Mounts: Vikas 100-700
5 6 7 8 9 10 11 12 14 16 18 2015
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
2000
2500
300035004000
5000
BRB 60 40
BRB 60 50
BRB 60 60BRB 60 70
BRB 80 40
BRB 80 50
BRB 80 60
BRB 80 70
BRB 95 40
BRB 95 60
BRB 95 70
BRB 110 40
BRB 110 50
BRB 110 60
BRB 110 70BRB 150 40
BRB 150 50
BRB 150 60
BRB 150 70
BRB 220 40
BRB 220 50
BRB 220 60
BRB 220 70
BRB 70 40 & BRB 65 40
BRB 70 50 & BRB 65 50
BRB 70 60 & BRB 65 60
BRB 70 70 & BRB 65 70
BRB 180 60
BRB 180 40
BRB 50 40
BRB 50 50
BRB 50 60
BRB 50 70
12 3 4 5 6 7 8 9 10 12 14 15 18 20
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
2000
2500
300035004000
5000
BRB60
40
BRB60
50
BRB60
60
BRB60
70
BRB80
40BRB
8050BRB
8060
BRB80
70
BRB11
040
BRB11
050
BRB11
060
BRB11
070
BRB15
040
BRB15
050BRB
150 60
BRB15
0 70 BRB22
040
BRB22
050BRB
220
60
BRB22
070
BRB70
40 &
BRB 65
40
BRB70
50 &
BRB 65
50
BRB70
60 &
BRB 65
60
BRB70
70 &
BRB 65
70
BRB18
040
BRB18
060
BRB50
40
BRB50
50
BRB50
60
BRB50
70
Load
(kg)
Load
(kg)
Natural Frequency Hz
Deflection (mm)
BRB 125 70
BRB 125 60
BRB 125 50
8-12
14-15
16-17
18-19
20-21
22-23
24
25
26-27
28-29
30-31
32-33
Contents
IAC nordic a/sJernholmen 44
DK-2650 HvidovreDenmark
Tel. +45 36785498Fax. +45 36781230
www.iac-nordic.dkwww.vikas.dk
Type Code Shore Thread Max. load[kg]
Max deflection[mm]
L W H D1 T D2 B
SD 4343W White 40º M12 110 14 110 65 54 84 7 11 5SD 4343R Red 50º M12 160 14 110 65 54 84 7 11 5SD 4343B Black 60º M12 230 14 110 65 54 84 7 11 5
�� nordic a/sProduct dataIAC SD4343 vibration isolator
Product Description
Applications
Load-deflection curve
0
50
100
150
200
250
0 2 4 6 8 10 12 14D ef elct io n in mm
IACS D4343(white) IACS D4343(R ed) IACS D4343(B lack)
Type Iac SD4343 mountings aremoulded from high grade syntheticrubber, in 3 different shorehardnesses. Threaded inserts areimbedded into the top and steel re-inforcing plates at the bottom of themounting. In case of replacement, theunique colour code allows you todetermine the rubber hardness of theelement at anytime, despite manyyears of use. Likewise is the IacNordic name printed on each isolator
The Iac SD4343 isolator can be usedin a wide range of applications.• Air handling units• Fans• Pumps• Compressors• Chillers• Floating floors• Isolation of studios and chambers
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
5
Sandwich mounts: VIKASH
Rubber Metal Rails: GMS
Captive Rubber Mounts: CMH
Captive Rubber Mounts: BRB
Captive Rubber Mounts: CML
Captive Rubber Mounts: BSB
Marine Mounts: Small, Medium, Large, X-Large
Marine Mounts: VS, VM, VB
Marine Mounts: VS, VM (AISI 316)
Captive Rubber Mounts: VL, VX
Captive Rubber Mounts: CMD
Captive Rubber Mounts: MD
Contents
34
35-37
38-39
40-41
42-43
44-45
46-47
48
49
50
51
52
6
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
6
Contents
Hydromounts
Captive Rubber Mounts: CHM
Chassis Mounts: SCH
Chassis Mounts: SCB
Flexible Bushings: VP
Flexible Bushings: GE
Conical Mounts: Cone
Conical Mounts: AT
Open Spring Mounts: FDA, FDA1, FDA2, FDA3, FDA4, FDA5, FDA6, FDA9
Spring Mounts: SM, SMD, SM2 & SMD2
Seismic Spring Mounts: S4
Restrained Spring Mounts: VRA1, VRA2, VRA4
53-54
55
56-57
58
59
60
61-65
66-67
68-73
74-75
76
77-79
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
7
Seismic Spring Mounts: SSM, SSM2
Cabinet Mounts: Rahbek
Wall & Ceiling Hangers: VTOE, VTN
Vikas Ceiling Hanger: LOH-VB
Vikas Ceiling & Wall Mounts: CH2
Suspending Spring Mount: HHD
Ceiling Hangers: CH1
Ribbed Rubber Pads: RG8
Vikas Mafund Pads: MF
Contacts
Contents
80-81
82
83
84
85
86
87
88
89
90
E
D
N
A K G
t
HE
D
N
A K G
t
H
M M
F F
8
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
8
Application options
Area of Use
Turret Mount
Sandwich M
ount
Machine M
ount
Captive Mount
Open Spring
Mount
Shock Mounts
Rubber B
uffer
Flexible Bushing
Instrument Mounts Various Mounts
Rubber Pads
SCH DRD Rabek MD DSD Hangers
Pipework Fittings X X X X
Buildings X X X
Electrical Motors X X X X X
Combustion Engines X X X X
Generators X X X X X
Household Equipment X X X
Office Equipment X X X X X
Compressors X X X X X X X
Grinding Mills X X X X X
Chillers X X X X X X X X X X
Flexible Joints X X
Mobile Equipment X X X X X X
Guillotines X X X X
Presses X X X X X
Pumps X X X X X X X X X
Piping X X
Punching Machines X X X X X
Printing Machines X X X
Saw Mills X X X
Rolling Mills X X
Ceilings X X
Fans X X X X X X X X X X
Machine Tools X X X X X X X X
This chart is intended for guidance only
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
9
Introduction
There is an increasing demand to reduce noise emitted by plant and machinery. The use of vibration isolators is an important part of reducing noise and vibration from industrial and marine plant and from mechanical equipment located in offices, residential apartments, studios, theatres, auditoriums, schools and universities, hospitals and research laboratories and other critical low noise spaces.
Machinery vibration from rigidly mounted equipment can be transferred to the supporting structure and travel large distances to be emitted as noise elsewhere in a building or structure.
The aim of vibration isolation is to reduce the transfer of vibration to the supporting structure and a correctly designed vibration isolation system can reduce vibrations by more than 95%.
Equipment which is resiliently mounted will have at least one natural frequency – the frequency or frequencies at which it will naturally oscillate. When the disturbing frequency and the natural frequency coincide, vibrations are amplified. The best vibration isolation, therefore, is achieved when the disturbing frequency is significantly higher than the natural frequency.
Most machinery can be effectively isolated provided the vibration isolation system is selected in accordance with the simple design procedures detailed on pages 3 and 10.
Types of Rubber
Rubber is available in a wide range of different types, each with specific properties.
IAC Acoustics’ vibration absorbers are normally manufactured in one of the rubber types listed below. Other types of rubber are available on request:
Material Properties
ResilienceTo make the best use of rubber’s properties, IAC produces vibration absorbers with different levels of resilience:
As rubber cannot be compressed, a spring effect can only be achieved if the rubber under pressure is able to expand.
The rubber’s degree of deflection is determined by its size, shape and resilience. The resilience indicates the rubbers’ resistance to changes in its form when under pressure. Rubber can tolerate a great pressure load with a deflection capacity of around 20% of its unloaded height.
Sideways pressure or ”shear” can normally take between 10 and 15% of the pressure load. One should ensure, however, that the rubber is not exposed to tensile load as the rubber’s lifetime will then be significantly reduced.
Vibration and Vibration Isolation
Rubber Properties Natural Rubber Neoprene
Metal adhesiveness Excellent ExcellentCompression Good Acceptable Internal absorption Excellent GoodMax. Operational Temp 70°C 100°COil Resistance Poor GoodOzone Resistance Poor GoodSunlight Resistance Poor Very GoodHeat Resistance Acceptable Good
Soft (White) resilience 45 ± 5 Sh
Medium (Red) resilience 55 ± 5 Sh
Hard (Black) resilience 65 ± 5 Sh. Sh. = Shore Hardness
10
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
10
Requirements
The following description of the design procedure is a useful and detailed tool, but should not be viewed as complete. It should, however, be sufficient for the vast majority of design challenges when:
• The vibration mounts are significantly softer than the sub-floor and the machine’s feet.
• The force of the vibration goes approximately through the centre of gravity.
• The distance between the vibration mount is greater than the vertical distance between the level of the vibration mounting and the centre of gravity.
• The design does not directly aim for a degree of isolation that is lower than 70%.
Very low rotating speeds require a very high degree of deflection to achieve a high degree of isolation. However, as a high deflection can lead to positional instability, a common solution is to choose a vibration mounting that is so hard that the resonancy frequency becomes higher than the disturbing frequency.
This gives zero isolation in terms of the fundamental frequency but shock and high frequency vibrations are significantly absorbed – and these are often the most disconcerting.
Supporting Medium or Base Frame
Insofar as the machinery is made up of several units, they should all be mounted on the same supporting medium or base frame. The vibration mountings are then mounted between the frame and the sub-floor. If the various individual units employ different RPM’s, the isolation must be selected to correspond to the lowest RPM.
A heavy supporting medium or base, which markedly increases the overall weight of the machine, appears to be stabilising when positioned. If, however, the force of the vibration is great and/or the RPM is low, then it is recommended that an extra mass is added in the following order of size, (where m stands for the machine’s mass in kg):
RPM Required Weight of Extra Mass (kg)
<800 1.5 - 2.0 x m
800-1200 1.0 - 1.5 x m
>1200 0.0 - 1.0 x m
Sub-Floor
An apparently correct vibration isolation can entirely fail, if the sub-floor lacks sufficient mass or stiffness. The following table gives an indication of the relevant values for how great a machine mass can be placed on a concrete layer of a given thickness. If the layer rests directly on the earth, it is permissible to double the mass.
Thickness of Concrete Layer
(mm)
Max. Permissable Machine Mass (kg)
150 1000
200 2000
300 5000
400 8000
600 10000
Flexible Connections
When a machine is mounted on vibration mountings, it has to be ensured that the vibrations are not transferred via stiff, inflexible connections. Pipe joints need to be fitted with flexible connecting links, (such as rubber hoses or compensators). Cables also need to be flexible and axle connectors should be fitted with flexible couplings.
Shock Disturbances
When selecting a vibration isolator for mobile installations, the design also needs to take into account shock disturbances, that is to say, the vibration mountings, in addition to the mass of the machine and the force of the vibrations, need to be able to deal with any shock disturbances. It is recommended to reckon with an additional 50 to 100% to deal with shock. It is further recommended that a vibration mounting with a ’Captive’ design is used, such as CMH, CML, Marine mounts, MD, CHM and Cones.
Placement of the Vibration Mounts
Ideally the vibration mounts should be placed symmetrically around the centre of gravity and following the same layout.
If the load placed on the vibration mountings is unequal, isolators should be selected so that the deflection remains the same at all points.
In a purely practical sense, it can be difficult to position the vibration mountings on the same horizontal level as the centre of gravity. If that is the case, the distance between the vibration mountings needs to be greater than the horizontal distance between the vibration mountings and the centre of gravity.
Vibration and Vibration Isolation
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
11
Calculation of vibration isolation can be very complex and sometimes requires different advanced tools, which are normally not used during a simple selection of a mount. IAC Acoustics has the in-house knowledge and also uses tools and software to find solutions to complex installations requiring vibration or shock insulation when a simple selection is not enough. We have assisted many clients in fine tuning new products by doing what we call ”vibration engineering” which covers:
• Development of special mounts• Advanced calculations in 6DoF (Degrees of Freedom)• Control by means of vibration measurements• Turnkey installation projects where we use our own trained
fitters with a special focus on attenuation of structure borne noise in buildings
• Improvement of existing systems
We undertake almost any case where vibration and shock engineering is involved and cooperate with leading partners, acoustical consultants and architects. Typically when a Finite Element analyses is required or large scale measurements are needed, the consultant has a leading role, due to the complexity.
Below are shown some examples of special projects, IAC Acoustics has been involved in. They involve vibration isolation of foundations from 20 tons to 500 tons and even advanced elements with a viscous damping. These typical applications require high quality products and high level of documentation.
Example 1: Noise attenuation in buildings by means of vibration isolation can be obtained by:• Providing cast in-situ floating floor• Passive isolation of building elements• Mounting machines on inertia bases• Isolating flights of stairs to dampen step noise• Calculations of all different systems
Example 2: A tuned mass damper in steel section of footbridge.This specially made damper combines a spring and viscous damping system.
Technical and Practical
12
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
12
Example 3: Model of large concrete foundation with a 2-stroke diesel engine.
The vibration isolation system consists of 144 rubber pads type VIKAFOAM25810 (see separate VIKAFOAM catalogue for further details) placed under the foundation.
The isolation of the concrete foundation was achieved by placing rubber pads over the entire floor area of the excavation for the foundation. Then the concrete was poured into the hole and the foundation was cast directly on the rubber pads.
Scope of delivery:• Dynamic analysis• Calculation of Eigen frequencies and visualisation of mode
shapes• Transmissibility curves• Delivery of rubber pads according to calculations
Examples from Installations
Static Displacement Points
Name Rel. to X (mm)
Y (mm)
Z (mm)
Phix (o)
Phiy (o)
Phiz (o)
Machine -0.039 -0.007 -1.326 0.000 -0.001 0
Natural Frequencies 1 2 3Fe (Hz) 10.328 13.070 13.914om(rad/s) 64.894 82.123 87.424X_M 0.000 -0.000 -0.000Y_M 0.000 0.000 0.000Z_M -0.023 1.000 1.000Phix_M 1.000 0.003 0.002Phiy_M -0.000 0.324 -0.108Phiz_M -0.037 -0.000 -0.000
In recent years, IAC Acoustics has taken on more projects requiring engineered vibration isolation solutions for large foundations.
Increased focus on the control of sound in buildings that are placed near to transport systems has meant an increasing requirement for vibration isolation of buildings against the influences of external and internal noise. For this we often use our PUR products VIKAFOAM (see separate VIKAFOAM catalogue for further details) that are made in standard sizes of 500 x 2000 mm.
Vibration isolation of rubbish chute Pump unit mounted on shock absorbers
Vibration isolation of valve test standShock isolation of Sea beacon (seen from the side)
Technical and Practical
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
1313
14
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
14
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Cylindrical vibration mount manufactured from natural rubber vulcanised to 2 galvanised steel plates with a central thread.
Type AD is made in 3 different rubber densities, where the colour of the rubber determines the hardness.• White 45 Sh.• Red 55 Sh.• Black 65 Sh.
The AD range is also available in neoprene rubber if the mount is going to be in contact with oil / fuel.
ApplicationThis vibration mount is used to dampen noise and vibrations from stationary machinery such as ventilators, pumps, electric motors, converters and compressors with frequencies above 1200rpm. It is constructed to be used in compression, but can handle minor shear forces.
AccessoriesGalvanised steel base plates are avialable for fastening on to floors.
ALSO AVAILABLE IN STAINLESS STEEL
When ordering, please use designations RADXXXX for stainless version.
Cylindrical Rubber Mounts AD, RAD
H
Gø D
L
T
a
ød
TypeWeight of
mount(g)
Hardness(Rubber Colour)
Max.Load(kg)
Static Deflection
(mm)
Dimensions (mm) Vibration Mount
Dimensions (mm) Base Plate
D H G L Width T ød a
AD1215 5 White 7 2.6 12 15 M3 - - - - -
AD2015 15White 15 1.5
20 15 M6 60 20 4 7.5 40Red 20 1.3Black 25 1.2
AD3025 50White 35 2.7
30 25 M8 90 30 6 10 60Red 45 2.5Black 55 2.0
AD4030 90White 65 3.5
40 30 M8 100 40 6 10 70Red 80 2.8Black 100 2.0
AD5035 170White 100 4.0
50 35 M10 110 50 8 10 80Red 115 3.0Black 135 2.0
AD7535 370White 225 2.8
75 35 M12 150 75 8 13 115Red 300 2.7Black 400 2.2
AD10050 800White 300 4.2
100 50 M12 175 100 8 13 145Red 400 4.0Black 600 2.2
VibrationMount
Base Plate
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
15
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load AD, RAD
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
16
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
16
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Cylindrical Rubber Mounts SD
Product Description
Cylindrical vibration mounts are manufactured from natural rubber, vulcanised to galvanised steel plates with central male or female threads. Available in different rubber compounds for environments with oil or ozone, acid or for the food industry.
They are also available in different hardness’s where the standard hardness is 45 Sh. The same mount in a harder compound can carry more load.
ApplicationThe SD range of mounts are mainly used to dampen noise and vibrations from stationary machinery such as ventilators, pumps, electric motors, converters and compressors.
It is constructed to be used in compression, but can handle minor shear forces.
ALSO AVAILABLE IN STAINLESS STEEL
Other sizes available from stock, please call for more information
SDD SDEDimensions Max. Load
(kg)Static Deflection*
(mm)Thread (Male)
Thread (Female)Diameter (mm) Height (mm)
10 10 5 1.4 M4x10mm M420 15 15 1.9 M8x18mm M620 20 15 3.2 M6x18mm M620 25 15 4.4 M6x18mm M625 10 25 1.5 M6x18mm M625 15 25 2.1 M6x18mm M625 20 25 3.1 M6x18mm M625 25 25 4.5 M6x18mm M625 30 25 5.8 M6x18mm M630 15 35 1.4 M8x20mm M830 20 35 2.8 M8x20mm M830 25 35 4.0 M8x20mm M830 30 35 5.4 M8x20mm M840 30 60 4.6 M8x23mm M840 40 60 7.2 M8x23mm M850 20 100 2.5 M10x28mm M1050 30 100 4.4 M10x28mm M1050 40 100 7.9 M10x28mm M1050 45 100 8.1 M10x28mm M1050 50 100 9.0 M10x28mm M1070 75 190 7.2 M10x28mm M1075 40 220 4.7 M12x37mm M1275 50 220 8.6 M12x37mm M12
100 40 400 4.4 M16x41mm M16100 50 400 6.5 M16x41mm M16
Above listed static deflection is based on a hardness of 45 Sh. All are available in other hardness’s
* The static deflection can vary between the types A, B, C, D and E.
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
17
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
SDA SDB SDCDimensions
Max. Load (kg)
Static Deflection*
(mm)
Thread Thread Thread
Diameter (mm) Height (mm) Male Male Male Female Female Female
10 10 5 2.3 M4x10mm M4x10mm M4x10mm M4 M4 M415 15 9 3.3 M4x10mm M4x10mm M4x10mm M4 M4 M415 20 9 4.1 M4x13mm M4x13mm M4x10mm M4 M4 M415 30 9 6.4 M4x15mm** M4x15mm** M4x15mm M4 M4** M4**20 15 15 1.8 M6x18mm M6x18mm M6x18mm M6 M6 M620 20 15 3.0 M6x18mm M6x18mm M6x18mm M6 M6 M620 25 15 4.2 M6x18mm M6x18mm M6x18mm M6 M6 M625 15 25 2.0 M6x18mm M6x18mm M6x18mm M6 M6** M6**25 20 25 2.9 M6x18mm M6x18mm M6x18mm M6 M6 M625 25 25 4.2 M6x18mm M6x18mm M6x18mm M6 M6 M625 30 25 5.6 M6x18mm M6x18mm M6x18mm M6 M6 M630 15 35 1.2 M8x20mm M8x20mm M8x20mm M8 M8 M830 20 35 2.7 M8x20mm M8x20mm M8x20mm M8 M8 M830 25 35 3.9 M8x20mm M8x20mm M8x20mm M8 M8 M830 30 35 5.3 M8x20mm M8x20mm M8x20mm M8 M8 M830 40 35 6.0 M8x20mm M8x20mm M8x20mm M8 M8 M840 30 60 4.6 M8x23mm M8x23mm M8x23mm M8 M8 M840 40 60 7.1 M8x23mm M8x23mm M8x23mm M8 M8 M850 20 100 1.8 M10x28mm M10x28mm M10x28mm M10 M10 M1050 25 100 3.2 M10x28mm M10x28mm M10x28mm M10 M10** M10**50 30 100 4.2 M10x28mm M10x28mm M10x28mm M10 M10 M1050 40 100 6.8 M10x28mm M10x28mm M10x28mm M10 M10 M1050 45 100 7.6 M10x28mm M10x28mm M10x28mm M10 M10 M1050 50 100 8.7 M10x28mm M10x28mm M10x28mm M10 M10 M1060 40 150 6.5 M10x28mm M10x28mm M10x28mm M10 M10 M1060 50 150 7.4 M12x37mm M12x37mm M12x37mm M12 M12 M1270 45 190 7.0 M10x28mm M10x28mm M10x28mm M10 M10 M1075 40 220 5.3 M12x37mm M12x37mm M12x37mm M12 M12 M1275 50 220 5.3 M12x37mm M12x37mm M12x37mm M12 M12 M1275 55 220 8.6 M12x37mm M12x37mm M12x37mm M12 M12 M12
100 40 400 4.0 M16x41mm M16x41mm M16x41mm M16 M16 M16100 50 400 6.3 M16x41mm M16x41mm M16x41mm M16 M16 M16100 55 400 7.5 M16x41mm M16x41mm M16x41mm M16 M16 M16100 60 400 9.1 M16x41mm M16x41mm M16x41mm M16 M16 M16100 75 400 11.5 M16x41mm M16x41mm M16x41mm M16 M16 M16150 50 1000 5.7 M16x41mm M16x41mm M16x41mm M20 M20 M20150 55 1000 7.0 M16x41mm M16x41mm M16x41mm M20 M20 M20
Above listed static deflection is based on a hardness of 45 Sh. All are available in other hardness’s* The static deflection can vary between the types A, B, C, D and E.** Not standard – available on request
Cylindrical Rubber Mounts SD
DimensionsMax. Load (kg) Hardness
(I.R.H.D.)Static Deflection
(mm)Thread (Male)
SDR
Diameter (mm) Height (mm)
18 18 1 45 3.7 M5x10mm20 24 2 45 5.0 M6x15mm39 42 4 45 7.0 M8x20mm
18
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
18
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Machine Isolators ADF, ADM, ADP
Product Description
Cylindrical machine feet: ADM/ADP types are manufactured in neoprene rubber, where the rubber is vulcanised onto galvanised steel discs with a central thread.
Type ADF is manufactured in natural rubber.
ALSO AVAILABLE IN AISI 304, AISI 316 STAINLESS STEEL
When ordering, please use designations RADF, RADM and RADP for stainless version.
Applications
Machine feet can be used for the absorption of noise and vibrations from any installed machinery. The shape of the feet give the machine feet a high static deflection and therefore excellent vibration insulation.
Type ADF is used for smaller machines, instruments, office machines as well as for household and hobby usage.
Type ADM/ADP is used particularly for punching machines, milling machines, shearing machines, turning lathes, grinding machines, routers, blowers, fans, compressors, convertors and many more.
Type ADM/ADP can be used where cleaning fluids come in contact with the rubber., due to their neoprene construction.
Accessories
Adjustable spindles and feet plates are available with types ADM and ADP. These are used to link several machine feet if required.
SPINDLES AVAILABLE IN AISI 316 QUALITY STAINLESS STEEL
L
GS
GM
Spindle
Diameter
GM
Hei
ght
Type Max. Load (kg)
Diameter (mm)
Height (mm) Thread (GM)
Spindle
Thread (GS) Length (mm)
ADF4020 60 40 20 Ø6.5 hole - -
ADM5035 150 50 35 M10 M12 130
ADM7535 300 75 35 M12 M16 130
ADM10030 500 100 30 M12 M16 130
ADP14040 1500 140 40 M16 M24 180
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
19
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load ADF, ADM, ADP
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
FP 10030/2 Combination plate
Length (mm)
Width (mm)
Thickness (mm)
Central Thread
FP 10030/2 195 80 10 M16
20
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
20
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Rubber Buffers GB
Product Description
Rubber blocks vulcanised to a galvanised steel plate with a central thread. The rubber buffers are manufactured in natural rubber of different densities.
Applications
Used to dampen all types of drop and impact shocks from cranes, rail wagons and stopping mechanisms. The GB range of buffers absorb the kinetic energy, minimising shock from the impact.These rubber buffers can also be used in machinery as a limiting element against any extreme oscillations for instance with the shifting of resonance frequency or as part of a flexible guide rail.
Fitting
These rubber buffers can be fitted as required in either fixed or mobile sections of machinery. If the buffer does not supply sufficient damping, then two buffers can be fitted in series opposite each other so that the necessary damping is obtained.
Gø B
H
H
Gø B
H
ø B
GB 7590/GB 90 110GB 5045 GB 3036/GB 5068
Type Max. Load* (kg)
Ø B (mm)
Height H (mm)
G(Internal Thread) Bolt Thread
GB2517 15-20 25 17 - M6x18
GB3036 80 30 36 - M8x20
GB5045 300 50 45 M10 -
GB5068 400 50 68 - M10x28
GB7590 480 75 90 M12 -
GB90110 800 90 110 M12 -
* Peak load – approx. 1 sec. Normal load is half of Maximum load.
H
ø B
GB 2517
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
21
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load GB
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Direction ofTravel
Direction ofTravel
Buffers in parallel setup Buffers in series As stop against extreme movement
22
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
22
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Polyetherurethane (PUR) Buffers PB
Material
• Polyetherurethane• Hardness 65 - 75 Sh.• Temperature range: -40°C to +80°C• Short interval temperature up to +110°C• Is resistant against oil and grease
Applications
• Buffers can be used as end stops for traverse cranes and elevators
• Can also be used as machine feet• Below values apply to impact loads• Because the buffer can be compressed to such an extreme extent
it offers really good shock absorption• Is less suited for isolation of dynamic forces from vibrating
machines• The maximum compression force should not be exceeded
Compressions vs load-diagrams can be viewed on pages 22 - 23
H
ØD
h
Ød
SizeØ D
(mm)Item No.
Diameter (mm) Thread Compression
in (mm) at
F-max
Compression in (%) at F-max
End force (kN)at 75% Compression
Work W (kNm)at F-Max.
Ø D Ø d H h Male stat. 1m/s 2m/s stat. 1m/s 2m/s
80 PB080080 80 72 79 40 M12 circa 53 75% 19 23 30 0.31 0.34 0.45
100 PB100100 100 93 100 40 M12 circa 79 75% 39 60 76 0.51 0.69 0.94
125 PB125125 125 117 124 40 M12 circa 94 75% 58 82 109 0.98 1.40 1.70
160 PB160160 160 152 158 40 M12 circa 118 75% 85 120 150 1.17 2.56 2.97
200 PB200200 200 180 202 40 M12 circa 158 75% 149 220 270 4.40 6.40 7.70
0
15
30
45
60
75
0
10
20
30
40
50
0 5 10 15 20 25 30 35 40
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
0
15
30
45
60
75
0
10
20
30
40
50
0 0.1 0.2 0.3 0.4 0.5
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Work (kNm)
0
15
30
45
60
75
0
10
20
30
40
50
0 20 40 60 80
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
60
70
100 120
80
90
0
15
30
45
60
75
0
10
20
30
40
50
0
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Work (kNm)
60
70
80
90
0 0.4 0.8 1.2 1.6 2.0
0
15
30
45
60
75
0
10
20
30
40
50
0 10 20 30 40 50 60 70 80
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
60
70
0
15
30
45
60
75
0
10
20
30
40
50
0
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Work (kNm)
60
70
0 0.2 0.4 0.6 0.8 1.0
0
15
30
45
60
75
0
20
40
0 20 40 60 80
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
60
100 120
80
100
0
15
30
45
60
75
00
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
0 1.0 2.0 3.0 3.5 4.00.5 1.5 2.50
Work (kNm)
20
40
60
80
100
0
15
30
45
60
75
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
0
15
30
45
60
75
0
20
40
0
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
60
80
0 2.0 4.0 6.0 7.0 8.01.0 3.0 5.0
Work (kNm)
100
120
140
0
20
40
0
60
80
0 150 250 300 35050 100 200
100
120
140
PB080080 (End Force at 75% Compression) PB080080 (Work at F-Max.)
PB100100 (End Force at 75% Compression) PB100100 (Work at F-Max.)
PB125125 (End Force at 75% Compression) PB125125 (Work at F-Max.)
PB160160 (End Force at 75% Compression) PB160160 (Work at F-Max.)
PB200200 (Work at F-Max.)PB200200 (End Force at 75% Compression)
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
23
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Polyetherurethane (PUR) Buffers PB0
15
30
45
60
75
0
10
20
30
40
50
0 5 10 15 20 25 30 35 40
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
0
15
30
45
60
75
0
10
20
30
40
50
0 0.1 0.2 0.3 0.4 0.5
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Work (kNm)
0
15
30
45
60
75
0
10
20
30
40
50
0 20 40 60 80
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
60
70
100 120
80
90
0
15
30
45
60
75
0
10
20
30
40
50
0
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Work (kNm)
60
70
80
90
0 0.4 0.8 1.2 1.6 2.0
0
15
30
45
60
75
0
10
20
30
40
50
0 10 20 30 40 50 60 70 80
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
60
70
0
15
30
45
60
75
0
10
20
30
40
50
0
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Work (kNm)
60
70
0 0.2 0.4 0.6 0.8 1.0
0
15
30
45
60
75
0
20
40
0 20 40 60 80
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
60
100 120
80
100
0
15
30
45
60
75
00
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
0 1.0 2.0 3.0 3.5 4.00.5 1.5 2.50
Work (kNm)
20
40
60
80
100
0
15
30
45
60
75
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
Load (kN)
0
15
30
45
60
75
0
20
40
0
Defl
ectio
n (%
)
Defl
ectio
n (m
m)
60
80
0 2.0 4.0 6.0 7.0 8.01.0 3.0 5.0
Work (kNm)
100
120
140
0
20
40
0
60
80
0 150 250 300 35050 100 200
100
120
140
PB080080 (End Force at 75% Compression) PB080080 (Work at F-Max.)
PB100100 (End Force at 75% Compression) PB100100 (Work at F-Max.)
PB125125 (End Force at 75% Compression) PB125125 (Work at F-Max.)
PB160160 (End Force at 75% Compression) PB160160 (Work at F-Max.)
PB200200 (Work at F-Max.)PB200200 (End Force at 75% Compression)
Key
static
1m/s
2m/s
24
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
24
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Rubber Turret Mounts FA
Product Description
Rubber cones vulcanised onto galvanised steel discs. This vibration mount is manufactured in natural rubber.
The white mounts are also available as hollow versions with lower maximum loadings than the standard solid version.
Applications
This vibration mount is used to insulate against noise and vibrations of smaller machinery and installations, such as smaller fans, pumps, electric motors, compressors, convertors and vibration tables.
These vibration mounts offer good deflection and therefore good vibration isolation. The FA range can also be used for passive insulation against vibrations that come from the outside. For example, with radio transmitters, measuring equipment, navigational instruments as well as insulating against vibrations during transport.
H
ød
C B
DC
G
B
TypeHardness
Rubber Colour
Rubber hardness
(Sh.)
Max. Load (kg)
Static Load Deflection
(mm)
Dimensions (mm)
D H G B C ød
FA5035White hollow 45 12 4.3
20 35 M8 50 39 5White 45 20 4.6
FA6535
White hollow 45 30 4.5
32 35 M10 65 48 7.5White 45 60 5.1
Red 55 90 5.6
Black 65 120 5.9
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
25
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Rubber Turret Mounts IAC SD4343
Product description
IAC SD4343 mountings are moulded from high grade synthetic rubber, in 3 different shore hardness’s. Threaded inserts are embedded into the top and steel re-inforcing plates at the bottom of the mounting.
In case of replacement, the unique colour code allows you to determine the rubber hardness of the element at anytime, despite many years of use.
Application
The IAC SD4343 isolators can be used in a wide range of applications including: air handling units, fans, pumps, compressors, chillers, floating floors and isolation of studios and chambers
W
L2L1
D
T
BM
H
Type Colour Hardness (Sh.)
Max. Load (kg)
Deflection (mm)
Dimensions (mm)
L1 W H L2 T D B M
IAC SD4343H White 40 80 10 110 65 54 84 7 11 5 M12
IAC SD4343R Red 50 115 10 110 65 54 84 7 11 5 M12
IAC SD4343S Black 60 165 10 110 65 54 84 7 11 5 M12
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
W
L2L1
D
T
BM
H
26
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
26
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Rubber Turret Mounts FAV
Product Description
Turret mounts give high levels of deflection, providing excellent levels of vibration reduction and shock absorption both in vertical and horizontal planes. Low cost and easy to install.
Stainless steel metals and oil resistant / high temperature rubbers are available on request.
Applications
Include: pumps, fans, compressors, vibratory screens, and processing equipment etc.
ALSO AVAILABLE IN STAINLESS STEEL
Type Ø A(mm)
B (mm)
Ø C (mm)
D (mm)
E (mm)
F (mm)
Ø G (mm)
H (mm)
Ø I (mm)
40 Sh 60 Sh 75 Sh
MAX load(kg)
Deflection(mm)
MAX load(kg)
Deflection(mm)
MAX load(kg)
Deflection(mm)
FAV0007 18 20 M6 50 64 2 7.0 7 43 3.5 3.0 9 3.0 13 2,5
FAV0025 33 25 M8 66 85 2 8.0 11 56 25 3.7 40 4.0 60 3,5
FAV0050 45 35 M10 92 114 2 10.0 14 76 40 4.0 80 4.0 100 4,0
FAV0100 53 40 M10 110 136 2 11.5 15 96 70 7.0 130 6.7 180 6,0
FAV0200 58 45 M10 124 151 3 11.5 13 101 150 8.0 220 7.0 320 8,0
FAV0400 70 63 M12 120 150 3 14.5 18 - 280 14.0 500 13.0 800 10,0
FAV0600 100 85 M16 160 200 4 14.5 25 - 380 15.0 750 14.0 1100 12,0
FAV1500 186 160 M24 250 310 6 18.0 43 - 1400 45.0 2500 40.0 3400 35,0
Ø G
D
D
E
B
Ø AØ C
F
H
D
Ø G
E
I Ø
FAV0007FAV0025FAV0050FAV0100FAV0200
FAV0400FAV0600FAV1500
Ø G
D
D
E
B
Ø AØ C
F
H
D
Ø G
E
I Ø
Ø G
D
D
E
B
Ø AØ C
F
H
D
Ø G
E
I Ø
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
27
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Rubber Turret Mounts FAV
FAV0007
0 1.5 3 4.5
Deflection (mm)
Load (kg)16
12
8
4
0
40Sh
60Sh
75Sh
FAV0050
0 1.5 3 4.5
Deflection (mm)
Load (kg)120
90
60
30
0
75Sh
60Sh
40Sh
FAV0025
0 1.5 3 4.5
Deflection (mm)
Load (kg)80
60
40
20
0
60Sh
40Sh
75Sh
FAV0100
0 3 6 9
Deflection (mm)
Load (kg)200
150
100
50
0
60Sh
40Sh
75Sh
FAV0200
0 3 6 9
Deflection (mm)
Load (kg)400
300
200
100
0
40Sh
60Sh
75Sh
FAV0400
0 5 10 15
Deflection (mm)
Load (kg)1000
750
500
250
0
60Sh
40Sh
75Sh
FAV0600
0 6 12 18
Deflection (mm)
Load (kg)1200
900
600
300
0
60Sh
40Sh
75Sh
FAV1500
0 20 40 60
Deflection (mm)
Load (kg)3600
2700
1800
900
0
40Sh
0
75Sh
60Sh
Order Information / Selection
Determine the number of isolators and the load per isolator prior to selecting the correct mount. Then select the mounts that provide the greatest deflection without exceeding the maximum allowable load on the mount, by referring to the static deflection curves listed below.
Each mount is available in several different hardness’s to provide high deflection for different loads for each size of mount. Once the mount is selected, the deflection in mm can be found at the load. Referring then to the nomograph on page 2 to identify the isolation efficiency.
When ordering, specify hardness. For example, FAV0400-60 for Max. load 500kg or FAV0050-40 for Max. load 40kg.
28
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
28
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
DRD vibration / shock absorbers offer high elasticity in both radial and axial directions. The horizontal elasticity of the DRD is very similar to its vertical elasticity, allowing very fine isolation of equipment with rotational vibrations and low speeds.
Technical Characteristics
• Metal parts are electro galvanised for long life• The floor plate is marked with the mount type and hardness,
making them easily identifiable, even after many years of use• DRD mounts are easy to install. Centred in the top metal part is
an internal thread and the foot plate has two or four mounting holes
Applications
DRD mounts are ideal for indoor stationary equipment and can be used for a variety of machines running at low speed such as:
• Compressors• Generators• Air-conditioners• Fans• Shakers
Round Cone Mounts DRD
Ø G
D
DE
B
Ø AØ C
F
D
G
E
DRD45DRD65DRD85DRD90
DRD130DRD170DRD250
Type A Ø(mm)
B(mm) C D
(mm)E
(mm)F
(mm)G Ø
(mm)Load (kg)
45 Sh.Load (kg)
60 Sh.Load (kg)
75 Sh.Weight
(g)
DRD 45 33 25 M8 66 85 2 8 20 50 - -
DRD 65 48 35 M10 92 114 2 10 40 75 - 170
DRD 85 48 38 M10 110 136 2 11.5 75 120 185 303
DRD 90 47 45 M10 124 151 3 11.5 130 220 275 430
DRD 130 76 63 M12 120 150 3 14.5 280 500 625 1080
DRD 170 93 85 M16 160 200 4 14.5 380 750 930 2390
DRD 250 187 160 M24 250 310 6 18 1400 2500 3150 10400
Ø G
D
D
E
B
Ø AØ C
F
D
G
E
Ø G
D
D
E
B
Ø AØ C
F
D
G
E
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
29
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Round Cone Mounts DRD
52025101533
10
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
2000
3000
4000
DRD 85 45
DRD 85 60
DRD 85 75
DRD 65 45
DRD 65 60
DRD 90 45DRD 90 60
DRD 90 75
DRD 130 45DRD 130 60
DRD 130 75DRD 170 45DRD 170 60
DRD 170 75
DRD 250 45DRD 250 60
DRD 250 751 2 3 4 5 6 8 10 15 20 30 40 50
10
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
2000
3000
4000
DRD 65 45
DRD 65 60
DRD 85 45
DRD 85 60
DRD 85 75
DRD 90 45
DRD 90 60DRD 90
75
DRD 130 4
5
DRD 130 6
0DRD 13
0 75
DRD 170 4
5
DRD 170 6
0DRD 17
0 75
DRD 250 4
5
DRD 250 6
0DRD 250 7
5
Natural Frequency Hz
Load
(kg)
Load
(Kg)
Deflection (mm)
DRD 45 45
DRD 45 60
DRD 45 45
DRD 45 60
30
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
30
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
DSD vibration mount has good elasticity in both radial and axial direction. The DSD mounts horizontal elasticity is very similar to its vertical elasticity, allowing very fine isolation of equipment with rotational vibrations and speeds over 1200 rpm. Technical Characteristics
• Metal parts are electrical galvanized• In the foot plate the type no. and hardness is marked, making
them easily identifiable, even after many years of use• DSD mounts are easy to install. Centred in the top metal part is
an internal thread and the foot plate has two mounting holes • Ability to double the flexibility by placing two DSD mounts on top
of each other in each support point Applications DSD vibration mount is ideal for indoor stationary equipment. Can be used for a wide range of machinery and production equipment with medium to high speed. They are therefore very suitable for fans, pumps, electric motors, machinery, etc.
Round Cone Mounts DSD
Ø H
Assembly
Ø AC
EFG
B
Diagrams show a top mounting plate in addition to the isolator. These are availabe in the correct sizes to complement the assembly and help protect the isolator from oil and other contaminents.
Type Ø A(mm)
B(mm) C D
(mm)E
(mm)F
(mm)G
(mm)Ø H
(mm)Load (kg)
45 Sh.Load (kg)
60 Sh.Load (kg)
75 Sh.Weight
(g)
DSD 40 43 17.3 M6 19 29 52 64 6.25 4 10 15 27
DSD 60 60 23 M6 14 39 76 95 6.5 15 25 45 78
DSD 80 86 25 M8 25 65 100 120 8.5 75 110 150 146
DSD 100 100 25 M10 22 67 124 149 10.5 90 160 220 274
DSD 150 150 34.5 M14 34 115 182 214 12 130 250 350 703
DSD 200 200 40 M18 35 140 240 280 15 500 825 1250 1758
Ø H
Assembly
Ø AC
EFG
B
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
31
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Round Cone Mounts DSD
4 5 6 8 10 12 14 16 18 20 22
3
5
10
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
DSD 40 45
DSD 40 60
DSD 60 40
DSD 60 60
DSD 60 75
DSD 80 45
DSD 80 60
DSD 80 75
DSD 100 45
DSD 100 60
DSD 100 75
DSD 150 75DSD 150 60
DSD 150 45
DSD 200 75DSD 200 60
DSD 200 45
1 1.5 2 3 4 5 6 7
3
5
10
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
DSD 40 45
DSD 40 60DSD 60 45
DSD 60 60
DSD 60 75
DSD 80 45DSD 80 60
DSD 80 75
DSD 100 45
DSD 100 60
DSD 100 75
DSD 150 45DSD 150 60
DSD 150 75DSD 200 45
DSD 200 60DSD 200 75
Natural Frequency Hz
Load
(Kg)
Load
(Kg)
Deflection (mm)
32
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
32
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Sandwich Mounts VIKAS 100-700
Product Description
The Sandwich mount is made of 3 steel plates that are zinc plated and vulcanised to layers of natural rubber. The vibration mount is made in 3 different hardnesses where the colour of the rubber indicates its hardness.
Application
The Sandwich vibration mount is used for reducing noise and vibration from large stationary machinery such as fans, pumps and diesel engines.
The mount is designed to be used in compression but can also be used in shear. When loaded in shear, refer to the following table for reduced maximum loadings .
ALSO AVAILABLE IN STAINLESS STEEL
B
H
5
L
ød
f
TypeHardness (Rubber Colour)
Load ShearStiffness
Scale*
Dimensions (mm)
Max Load (kg)
Static Deflection
(mm)
Max. Load (kg)
Spring Constant (kg/mm)
H B L a f ød
100White 300
4.565 3.9 1.31
43 57 108 - 89 11Red 440 110 6.4 1.32Black 570 155 9.6 1.53
200White 440
4.585 5.5 1.31
43 57 127 - 108 11Red 620 140 8.5 1.32Black 830 200 12.7 1.53
400White 850
4.5150 9 1.31
43 57 168 - 146 11Red 1300 235 14 1.32Black 1800 345 21 1.53
500White 1800
4.5225 13 1.31
43 83 216 51 178 11Red 2700 375 23 1.32Black 4000 540 35 1.53
600White 3700
4.5420 24 1.31
43 108 251 51 210 13Red 5800 680 40 1.32Black 8600 935 54 1.53
700White 6400
4.5505 30 1.31
43 108 302 51 260 14Red 10000 855 52 1.32Black 15000 1180 71 1.53
* Stiffness scale is the relation between the dynamic and static stiffness.
ød
f
a
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
33
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load VIKAS 100-700
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
34
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
34
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The VIKASH sandwich mount can handle large forces in compression, both in terms of static load and shock. The mount also provides good insulation when subjected to horizontal loads. The VIKASH mounts can be mounted flat or in combination “V” where the mounts are angled 45° towards the centre of gravity. The structure consists of 2 outer steel plates with 4 mounting holes, between round layers of rubber separated vulcanised steel plates. Each size of mount is available in 2 or more rubber hardness’s, covering a load range between 2 and 30 tons.
Applications
High compression option, low transverse stiffness and relatively low additional height makes SH mounts ideal for heavy machinery of between 10 to 100 tons such as: large vibrator rollers, mills, presses, turbines, and generators.
Sandwich Mounts VIKASH
“V”support of engine
Type
DimensionsWeight
(kg)
40 Sh 60 Sh
B(mm)
D(mm)
E(mm)
F(mm)
G(mm)
Max Load(kg)
Deflection (mm)
Max Load(kg)
Deflection (mm)
VIKASH125 52 118 148 13.5 5 2.6 2250 3.6 4500 3.5
VIKASH150 63 136 166 13.5 6 4.5 3750 4.9 7500 4.2
VIKASH200 85 184 220 17 8 9.2 6000 6.0 12000 5.9
VIKASH300 120 270 310 22 10 27 15000 9.1 30000 9.3
VIKASH
0 3 6 9
Deflection (mm)
Load (kg)1600
1200
800
400
0
VIKASH125-40
VIKASH
4 6 8 10
Deflection (mm)
Load (kg)35000
27500
20000
12500
5000
VIKASH150-40
VIKASH200-40
VIKASH125-60
VIKASH150-60
VIKASH200-60
VIKASH300-60
VIKASH300-40
ED
ø F
D EB
G
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
35
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The standard rails are made in natural rubber vulcanised to 1 or 2 steel rails.
The rails can are made in 3 hardnesses:45 Sh.55 Sh.65 Sh.
They are also available in stainless steel with neoprenerubber for installations where oil or ozone are present.
Our rails are especially suited for the isolation of heavy equipment. Since the rails can be cut to any size, the isolation of foundations, lathe machines, mills, punching machines or any other suitable application, can be individually designed. In addition to being able to tailor the length of the rail, holes can also be drilled and threads cut easily into this highly adaptable range of mounts.
Rubber Metal Rails GMS
HB
ST
H
BST
ST
Deflection S (mm) is from test subjects in dimension: (Length=2 x Width) with the steel thickness marked with *
Width B (mm)
Height H (mm)
Length (mm)
Steel Thickness ST (mm)
Deflection S (L=2xB)
45 Sh. Max.Load(kg)
55 Sh. Max.Load(kg)
65 Sh. Max.Load(kg)
25 25 2000 5*,10135
144583
31100182
67216392
25 30 2000 5*,10248
2044
102
4799
227
103217496
30 30 2000 5*,10248
3268
161
71152352
155329760
40 20 2000 5*,10135
88313648
175618
1260
36412722573
40 35 2000 5*,10369
76167279
168365604
363787
1298
40 45 2000 5*,10369
49105167
112237376
246517821
50 35 2000 5*,10369
137303515
293644
1081
62613712291
50 40 2000 5*,10369
105226372
229492802
49310581719
50 45 2000 5*,10369
85180290
188398637
408554
1378
Width B (mm)
Height H (mm)
Length (mm)
Steel Thickness ST (mm)
Deflection S (L=2xB)
45 Sh. Max.Load(kg)
55 Sh. Max.Load(kg)
65 Sh. Max.Load(kg)
50 50 2000 5*,1048
12
96206337
216462749
47110061625
50 55 2000 5*,1048
12
83176282
188397635
410868
1385
60 30 2000 5,10*135
168573
1110
33011162143
67722824360
60 35 2000 5,10*,15135
102336621
209680
1247
43514162585
60 50 2000 5,10*48
12
183404681
398871
1453
85618663099
60 60 2000 5,10*,1548
12
128273442
286607976
62013172112
60 80 2000 5,10*48
12
80167261
184381596
404838
1307
70 30 2000 5,10*135
280966
1888
53918423571
109537257186
70 45 2000 5,10*248
170360826
355751
1702
75215853573
GMS-1 (One Steel Rail) GMS-1 (One Steel Rail)
36
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
36
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
GMS-2 (Two Steel Rails)
Width B (mm)
Height H (mm)
Length (mm)
Steel Thickness ST (mm)
Deflection S (L=2xB)
45 Sh. Max.Load(kg)
55 Sh. Max.Load(kg)
65 Sh. Max.Load(kg)
25 25 2000 5*,10135
144583
283591
1304
60412592766
25 30 2000 5*,10248
2044
102
4799
227
103217496
30 30 2000 5*,10248
3268
161
71152352
155329760
40 20 2000 5*,10135
88313648
175618
1260
36412722573
40 35 2000 5*,10369
76167279
168365604
363787
1298
40 45 2000 5*,10369
49105167
112237376
246517821
50 35 2000 5*,10369
137303515
293644
1081
62613712291
50 40 2000 5*,10369
105226372
229492802
49310581719
50 45 2000 5*,10369
85180290
188398637
408554
1378
50 50 2000 5*,1048
12
96206337
216462749
47110061625
50 55 2000 5*,1048
12
83176282
188397635
410868
1385
60 30 2000 5,10*135
168573
1110
33011162143
67722824360
60 35 2000 5,10*,15135
102336621
209680
1247
43514162585
60 50 2000 5,10*48
12
183404681
398871
1453
85618663099
GMS-1 (One Steel Rail)
HB
ST
H
BST
ST
Rubber Metal Rails GMS
Width B (mm)
Height H (mm)
Length (mm)
Steel Thickness ST (mm)
Deflection S (L=2xB)
45 Sh. Max.Load(kg)
55 Sh. Max.Load(kg)
65 Sh. Max.Load(kg)
70 50 2000 5,10*248
133278618
283591
1304
60412592766
70 60 2000 5,10*48
12
188404658
413882
1427
89119003063
80 45 2000 5,10*248
252536
1242
51610952505
108122885206
80 60 2000 5,10*48
12
267577945
57612372011
123426444285
80 80 2000 5,10*,1548
12
156327514
351731
1147
76415912492
100 45 2000 10*,15248
50510842550
100021374969
20604391
10156
100 55 2000 10*,1548
12
61513682318
126427864675
265158179718
100 60 2000 10*,1548
12
49710841798
103822503699
219347387760
100 80 2000 5,10*,1548
12
272572905
59712491969
128726914335
120 45 2000 10,15*248
136730077509
25795648
13959
51851132427836
120 60 2000 10,15*48
12
108124264157
215948038152
44649893
16714
120 80 2000 10,15*48
12
50510741725
106922633613
227248007644
150 60 2000 10,15*48
12
225151058853
43459751
16821
88371981833936
200 100 2000 15*48
12
132027814412
269756598939
56401181218618
H
BST
H
BST
ST
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
37
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Width B (mm)
Height H (mm)
Length (mm)
Steel Thickness ST (mm)
Deflection S (L=2xB)
45 Sh. Max.Load(kg)
55 Sh. Max.Load(kg)
65 Sh. Max.Load(kg)
60 60 2000 5,10*,1548
12
128273442
286607976
62013172112
60 80 2000 5,10*48
12
80167261
184381596
404838
1307
70 30 2000 5,10*135
280966
1888
53918423571
109537257186
70 45 2000 5,10*248
170360826
355751
1702
75215853573
70 50 2000 5,10*248
133278618
283591
1304
60412592766
70 60 2000 5,10*48
12
188404658
413882
1427
89119003063
80 45 2000 5,10*248
252536
1242
51610952505
108122885206
80 60 2000 5,10*48
12
267577945
57612372011
123426444285
80 80 2000 5,10*,1548
12
156327514
351731
1147
76415912492
100 45 2000 10*,15248
50510842550
100021374969
20604391
10156
GMS-2 (Two Steel Rails)
Rubber Metal Rails GMS
Width B (mm)
Height H (mm)
Length (mm)
Steel Thickness ST (mm)
Deflection S (L=2xB)
45 Sh. Max.Load(kg)
55 Sh. Max.Load(kg)
65 Sh. Max.Load(kg)
80 80 2000 5,10*,1548
12
156327514
351731
1147
76415912492
100 45 2000 10*,15248
50510842550
100021374969
20604391
10156
100 55 2000 10*,1548
12
61513682318
126427864675
265158179718
100 60 2000 10*,1548
12
49710841798
103822503699
219347387760
100 80 2000 5,10*,1548
12
272572905
59712491969
128726914335
120 45 2000 10,15*48
12
136730077509
25795648
13959
51851132427836
120 60 2000 10,15*248
108124264157
215948038152
44649893
16714
120 80 2000 10,15*48
12
50510741725
106922633613
227248007644
150 60 2000 10,15*48
12
225151058853
413882
1427
89119003063
200 100 2000 15*48
12
132027814412
269756598939
56401181218618
H
BST
H
BST
ST
H
BST
H
BST
ST
38
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
38
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mounts CMH
Product Description
Captive mounts are designed with an integral overload stop, which controls the movement of equipment during transit and provides a fully failsafe arrangement suitable for both mobile and static applications.
A universal mounting, popular in a wide range of applications. Cost effective, high performance and easy to install. The rubber is used in shear / compression providing optimum performance and offers a high level of vibration reduction. The metal cap provides UV and weathering protection and shielding from contaminants such as oil and fuel. Load Rating from 35kg to 4000kg
Applications
Include: diesel engines generator sets, pumps, compressors, vehicles, marine engines, construction plant, marine plant, mobile plant and fans.
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
Type AØ (mm)
B(mm) C D1
(mm)D2
(mm)E
(mm)F
(mm)G
(mm)
CMH060 63 35 M10 or M12 76 90 110 9 2.5
CMH070 65 35 M12 100 - 120 15 3
CMH080 83 35 M10 or M12 108 110 135 11 3
CMH110 106 42 M12 or M16 138 146 171 12.5 3
CMH150 155 53 M16 176 188 216 14 4
CMH180 183 86 M20 146 - 180 14.5 5
CMH220 220 105 M24 180 - 220 17.5 6
CMH180CMH220
40 Sh. 45 Sh. 50 Sh. 60 Sh. 70 Sh.
Type Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection (mm)
Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection(mm)
CMH060 35 3.5 - - - - 60 3.5 100 3.5
CMH070 50 4.0 - - - - 120 3.5 - -
CMH080 70 6.0 - - - - 190 6.0 - -
CMH110 200 7.0 - - 360 7.0 500 7.0 625 7.0
CMH150 - - 500 12 - - 800 12.0 1800 10.0
CMH180 900 15.0 - - 1200 14.0 1700 14.0 - -
CMH220 - - 1500 18.0 - - 3000 18.0 4000 15.0
CMH060CMH070CMH080CMH110CMH150
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
39
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load CMH
CMH060
0 1.5 3 4.5
Deflection (mm)
Load (kg)120
90
60
30
0
40Sh
60Sh
70Sh
CMH070
0 1.5 3 4.5
Deflection (mm)
Load (kg)200
150
100
50
0
60Sh
40Sh
CMH080
0 3 6 9
Deflection (mm)
Load (kg)200
150
100
50
0
60Sh
40Sh
CMH150
0 5 10 15
Deflection (mm)
Load (kg)2000
1500
1000
500
0
60Sh
45Sh
70Sh
CMH110
0 3 6 9
Deflection (mm)
Load (kg)800
600
400
200
0
60Sh
50Sh
40Sh
70Sh
CMH180
0 6 12 18
Deflection (mm)
Load (kg)2000
1500
1000
500
0
60Sh
50Sh
40Sh
CMH220
0 7.5 15 22.5
Deflection (mm)
Load (kg)5000
3750
2500
1250
0
70Sh
60Sh
45Sh
40
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
40
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mounts BRB
Product Description
The design of the BRB captive mount makes the rubber work in both shear and compression with an optimum balance between flexibility and horizontal stability. The relatively high height of the BRB range offers great flexibility, low natural frequencies and excellent vibration isolation.
This range of captive mounts is used, where the number 1 priority is vibration isolation.
Technical Characteristics
• Top metal cap protects the rubber against fuel and oil• Metal parts are electro galvanised for long life• Designed as a secured mount to ensure that the top and bottom
mounting plates are always connected, even when subjected to high shock loads
• The base plate is marked with mount type and hardness, making them easy to identify even after many years of use
Applications
The product is tailored to mobile and marine plant equipment that require high vibration isolation and good stability. BRB mounts are also suitable for isolation of axial and radial shock.
This mount can also be used for passive isolation of equipment that is near or on machines that vibrate. It could be a control or fuse box that has to be both protected against vibrations and at the same time be secured from falling.
The captive mount design provides good protection of the rubber against dripping oil and fuel and also gives protection against UV light. The BRB mount also provides excellent vibration isolation to marine and mobile plant equipment, compressors, pumps and fans etc.
Type40 Sh.
Max Load (kg)
50 Sh.Max Load
(kg)
60 Sh. Max Load
(kg)
70 Sh. Max Load
(kg)
BRB50 20 40 60 80
BRB60 30 45 65 75
BRB65 50 75 120 140
BRB70 50 75 120 140
BRB80 M10 80 130 175 235
BRB80 M12 80 130 175 235
BRB110 M12 200 305 420 450
BRB110 M16 200 305 420 450
BRB125 310 450 700 900
BRB150 450 570 800 1000
BRB180 875 1110 1700 2630
BRB220 1600 2400 3400 4200
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
BRB050BRB060BRB065BRB070BRB080BRB110BRB150
BRB125BRB150BRB180BRB220
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
41
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load BRB
5 6 7 8 9 10 11 12 14 16 18 20
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
35004000
5000
BRB 60 40
BRB 60 50
BRB 60 60 BRB 60 70
BRB 80 40
BRB 80 50
BRB 80 60
BRB 80 70BRB 95 40
BRB 95 60
BRB 95 70
BRB 110 40
BRB 110 50
BRB 110 60
BRB 110 70BRB 150 40
BRB 150 50
BRB 150 60
BRB 150 70
BRB 220 40
BRB 220 50
BRB 220 60
BRB 220 70
BRB 70 40 & BRB 65 40
BRB 70 50 & BRB 65 50
BRB 70 60 & BRB 65 60
BRB 70 70 & BRB 65 70
BRB 180 60
BRB 180 40
BRB 50 40
BRB 50 50
BRB 50 60
BRB 50 70
1 2 3 4 5 6 7 8 9 10 12 14 15 18 20
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
2000
2500
3000
35004000
5000
BRB60 40
BRB60 50
BRB60 60
BRB60 70
BRB80 40
BRB80 50BRB
80 60BRB
80 70
BRB110 40
BRB110 50
BRB110 60
BRB110 70
BRB150 40
BRB150 50BRB150 60
BRB150 70
BRB220 40
BRB220 50BRB
220 60BRB
220 70
BRB70 40 &
BRB 65 40
BRB70 50 &
BRB 65 50
BRB70 60 &
BRB 65 60
BRB70 70 &
BRB 65 70
BRB180 40
BRB180 60
BRB50 40
BRB50 50
BRB50 60
BRB50 70
Load
(kg)
Load
(kg)
Natural Frequency Hz Deflection (mm)
BRB 125 70
BRB 125 60BRB 125 50
5 6 7 8 9 10 11 12 14 16 18 20
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
35004000
5000
BRB 60 40
BRB 60 50
BRB 60 60 BRB 60 70
BRB 80 40
BRB 80 50
BRB 80 60
BRB 80 70BRB 95 40
BRB 95 60
BRB 95 70
BRB 110 40
BRB 110 50
BRB 110 60
BRB 110 70BRB 150 40
BRB 150 50
BRB 150 60
BRB 150 70
BRB 220 40
BRB 220 50
BRB 220 60
BRB 220 70
BRB 70 40 & BRB 65 40
BRB 70 50 & BRB 65 50
BRB 70 60 & BRB 65 60
BRB 70 70 & BRB 65 70
BRB 180 60
BRB 180 40
BRB 50 40
BRB 50 50
BRB 50 60
BRB 50 70
1 2 3 4 5 6 7 8 9 10 12 14 15 18 20
15
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
1000
1500
2000
2500
3000
35004000
5000
BRB60 40
BRB60 50
BRB60 60
BRB60 70
BRB80 40
BRB80 50BRB
80 60BRB
80 70
BRB110 40
BRB110 50
BRB110 60
BRB110 70
BRB150 40
BRB150 50BRB150 60
BRB150 70
BRB220 40
BRB220 50BRB
220 60BRB
220 70
BRB70 40 &
BRB 65 40
BRB70 50 &
BRB 65 50
BRB70 60 &
BRB 65 60
BRB70 70 &
BRB 65 70
BRB180 40
BRB180 60
BRB50 40
BRB50 50
BRB50 60
BRB50 70
Load
(kg)
Load
(kg)
Natural Frequency Hz Deflection (mm)
BRB 125 70
BRB 125 60BRB 125 50
Type AØ (mm)
B(mm) C D1
(mm)D2
(mm)E
(mm)F
(mm)G
(mm)Weight
(g)
BRB50 50 25 M8 63 70 85 6.5 2 100
BRB60 64 35 M10 76 91 110 9 2.5 225
BRB65 65 35 M10/M12 76 91 110 9 2.5 243
BRB70 65 35 M12 100 - 120 11 3 253
BRB80 M10 83 35 M10 108 110 130 9 3 398
BRB80 M12 83 35 M12 108 110 130 9 3 398
BRB110 M12 106 41 M12 137 149 170 12.5 3.5 857
BRB110 M16 106 41 M16 137 149 170 12.5 3.5 857
BRB125 123 48 M16 154 162 190 14 4 1170
BRB150 155 53.5 M16 176 188 218 14.5 4 1840
BRB150 RECT 155 53.5 M16 125 132 164 14.5 4 2030
BRB180 183 86 M20 146 146 180 14.5 5 3100
BRB220 225 105 M24 180 - 220 18.5 6 6716
BRB70 and BRB180 have round mounting holes, not slotted.
42
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
42
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mounts CML
Product Description
Captive mounts are designed with an integral overload stop, which controls the movement of equipment during transit and provides a fully failsafe arrangement suitable for both mobile and static applications.
A universal mounting, popular in a wide range of applications. Cost effective, high performance and easy to install. The rubber is used in shear / compression providing optimum performance and offers a high level of vibration reduction. The metal cap provides UV and weathering protection and protection from contaminants such as oil and fuel. The CML mount is used where stability is a focus area. Load rating from 125kg to 5000kg.
Applications
Applications include: diesel engines generator sets, pumps, compressors, vehicles, marine engines and construction plant equipment.
Type AØ (mm)
B(mm) C D1
(mm)D2
(mm)E
(mm)F
(mm)G
(mm)
CML060 63 35 M10 - M12 76 90 110 9 2.5
CML080 77 30 M10 - M12 108 110 135 15 3
CML095 93 35 M10 - M12 122 124 144 10 2.5
CML110 106 38 M12 - M16 138 146 171 12.5 3
CML125 121 42 M12 – M16 156 158 190 13.5 3.3
CML150 155 48 M16 176 188 216 14 4
CML160 162 59 M20 - 140 170 14.5 4
CML180 180 66 M20 149 163 192 14.5 4
CML220 220 105 M24 - 180 220 17.5 6
CML160 and CML220 have round mounting holes, not slotted.
CML060CML080CML095CML110CML125CML150
CML160CML180CML220
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
43
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load CML
40 Sh. 45 Sh. 60 Sh. 65 Sh. 70 Sh.
Type Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection (mm)
Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection(mm)
CML060 125 3.5 - - 175 3.5 - - 225 3.5
CML080 - - 110 3.0 280 3.0 - - - -
CML095 - - 200 3.5 320 3.0 - - - -
CML110 - - 250 4.0 325 3.5 - - 520 3.0
CML125 - - 400 4.5 650 4.0 - - - -
CML150 750 8.0 - - 1500 8.0 - - - -
CML160 900 8.0 - - 1400 7.0 - - - -
CML180 - - 1250 8.0 2000 7.0 - - 3000 5.5
CML220 - - 2500 10.0 - - 4000 9.0 5000 7.0
CML060
0 1.5 3 4.5
Deflection (mm)
Load (kg)300
225
150
75
0
40Sh
60Sh
70Sh
CML080
0 1.5 3 4.5
Deflection (mm)
Load (kg)300
225
150
75
0
60Sh
45Sh
CML095
0 1.5 3 4.5
Deflection (mm)
Load (kg)400
300
200
100
0
60Sh
45Sh
CML125
0 2 4 6
Deflection (mm)
Load (kg)700
525
350
175
0
45Sh
60Sh
CML110
0 2 4 6
Deflection (mm)
Load (kg)600
450
300
150
0
60Sh
45Sh
70Sh
CML150
0 3 6 9
Deflection (mm)
Load (kg)2000
1500
1000
500
0
60Sh
40Sh
CML180
0 3 6 9
Deflection (mm)
Load (kg)3200
2400
1600
800
0
60Sh
45Sh
70Sh
CML160
0 3 6 9
Deflection (mm)
Load (kg)2000
1500
1000
500
0
60Sh
40Sh
0 3 6 9
Deflection (mm)
Load (kg)3200
2400
1600
800
0
60Sh
45Sh
70Sh
CML220
0 4 8 12
Deflection (mm)
Load (kg)6000
4500
3000
1500
0
65Sh
45Sh
44
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
44
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mounts BSB
Product Description
The design of the BSB captive mount makes the rubber work in both shear and compression with an optimum balance between rigidity and horizontal stability.
The captive mount is optimised for mobile installations, where stability is the number one priority.
Technical Characteristics
• The top metal part protects the rubber from fuel and oil• Metal parts are electro galvanised for long life• Designed as a secured mount to ensure that the top and bottom
mounting plates are always connected, even when subjected to high shock loads
• The base plate is marked with mount type and hardness, making them easy to identify even after many years of use
Applications
In mobile installations where high stability is required, for example for equipment where the centre of gravity is high relative to the width. The mount is also suitable for installations that are exposed to high wind loads, where it is very important that the mount is of a secured type.This captive mount can also be used for passive isolation of equipment that is near or on machines that vibrate. It could be a control or fuse box that has to be both protected against vibrations and at the same time be secured from falling.
The mount design provides good protection of the rubber against dripping oil and fuel and also gives protection against UV light. The BSB mount will provide excellent vibration isolation to marine and mobile plant equipment, compressors, pumps and fans etc.
Type40 Sh.
Max Load (kg)
50 Sh. Max Load
(kg)
60 Sh. Max Load
(kg)
70 Sh. Max Load
(kg)
BSB60 70 130 170 245
BSB80 M10 110 161 231 300
BSB80 M12 110 161 231 300
BSB95 M10 180 230 270 330
BSB95 M12 180 230 270 330
BSB110 M12 250 350 450 550
BSB110 M16 250 350 450 550
BSB125 450 550 690 900
BSB150 750 950 1300 1650
BSB150 (rect.) 750 950 1300 1650
BSB160 900 1200 1600 2300
BSB180 1300 1750 2100 2900
BSB220 2500 - 4000 -
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
BSB060BSB080BSB095BSB110BSB125BSB150
BSB150BSB160BSB180BSB220
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
CØ A
G
B
F
E
D1
ED1
D2
D2
F
D1D2E
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
45
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load BSB
6 7 86 7 8 9 10 11 12 14 16 18 20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
35004000
5000
35004000
5000
BSB 60 40
BSB 60 50
BSB 60 60
BSB 60 70
BSB 80 40
BSB 80 50
BSB 80 60
BSB 80 70
BSB 95 40
BSB 95 50
BSB 95 60
BSB 95 70
BSB 110 50
BSB 110 40
BSB 110 60
BSB 110 70BSB 125 40
BSB 125 50
BSB 125 60
BSB 125 70
BSB 180 40
BSB 180 60
BSB 180 70BSB 220 40
BSB 220 60BSB 160 70
BSB 160 60
BSB 160 40
BSB 160 50
BSB 150 70BSB 150 60BSB 150 50
BSB 150 40
BSB 50 40
BSB 50 50
BSB 50 60
BSB 50 70
0187654321
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
35004000
5000
BSB06
40
BSB 60 50
BSB 60 60
BSB 60 70
BSB 80 40
BSB 80 50BSB 80 60
BSB 80 70
BSB 9 5 40BSB 95 50BSB 95 60
BSB 95 70
BSB 110 40
BSB 110 50BSB 110 60BSB 110 70
BSB 125 40BSB 125 50BSB 125 60
BSB 125 70 BSB 180 40
BSB 180 60BSB 180 70
BSB 220 40
BSB 220 60
BSB 160 40
BSB 160 50
BSB 160 60
BSB 160 70
BSB 150 40
BSB 150 60BSB 150 70
BSB 50 40
BSB 50 50
BSB 50 60
BSB 50 70
Load
(kg)
Natural Frequency Hz
Load
(kg)
Deflection (mm)
6 7 86 7 8 9 10 11 12 14 16 18 20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
35004000
5000
35004000
5000
BSB 60 40
BSB 60 50
BSB 60 60
BSB 60 70
BSB 80 40
BSB 80 50
BSB 80 60
BSB 80 70
BSB 95 40
BSB 95 50
BSB 95 60
BSB 95 70
BSB 110 50
BSB 110 40
BSB 110 60
BSB 110 70BSB 125 40
BSB 125 50
BSB 125 60
BSB 125 70
BSB 180 40
BSB 180 60
BSB 180 70BSB 220 40
BSB 220 60BSB 160 70
BSB 160 60
BSB 160 40
BSB 160 50
BSB 150 70BSB 150 60BSB 150 50
BSB 150 40
BSB 50 40
BSB 50 50
BSB 50 60
BSB 50 70
0187654321
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
35004000
5000
BSB06
40
BSB 60 50
BSB 60 60
BSB 60 70
BSB 80 40
BSB 80 50BSB 80 60
BSB 80 70
BSB 9 5 40BSB 95 50BSB 95 60
BSB 95 70
BSB 110 40
BSB 110 50BSB 110 60BSB 110 70
BSB 125 40BSB 125 50BSB 125 60
BSB 125 70 BSB 180 40
BSB 180 60BSB 180 70
BSB 220 40
BSB 220 60
BSB 160 40
BSB 160 50
BSB 160 60
BSB 160 70
BSB 150 40
BSB 150 60BSB 150 70
BSB 50 40
BSB 50 50
BSB 50 60
BSB 50 70
Load
(kg)
Natural Frequency Hz
Load
(kg)
Deflection (mm)
Type AØ (mm)
B(mm) C D1
(mm)D2
(mm)E
(mm)F
(mm)G
(mm) Weight (g)
BSB60 64 35 M10 76 91 110 9 2.5 235
BSB80 M10 79 30 M10 108 110 130 9 3 355
BSB80 M12 79 30 M12 108 110 130 9 3 351
BSB95 M10 95 35 M10 122 124 150 10 3 488
BSB95 M12 95 35 M12 122 124 150 10 3 488
BSB110 M12 106 37 M16 137 149 170 12.5 3.5 785
BSB110 M16 106 37 M16 137 149 170 12.5 3.5 785
BSB125 124 43 M16 156 158 192 14 3.5 1109
BSB150 155 49 M16 176 188 218 14.5 4 1818
BSB150 RECT 155 49 M16 125 132 164 14.5 4 2060
BSB160 162 59 M20 140 140 170 14.5 4 2177
BSB180 180 66 M20 149 163 192 14.5 4 2914
BSB220 225 105 M24 180 180 220 18.5 6 6716
46
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
46
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
This mount is ideal for marine applications, particularly marine engines, both main and auxiliary engines.
The mount is designed so that the horizontal stiffness in the x- and y-axes are different, which in turn are also different from the vertical stiffness. This provides marine engines with a good relation between how flexible the set up is in the direction of propeller thrust, engine torsion and engine load.
Technical characteristics
• Top metal part protects the rubber against fuel and oil• Metal parts are electro galvanised• The Marine mount is a secured mount designed to ensure that
the top and bottom mounting plates are always connected, even when subjected to high shock loads
• The base plate is marked with mount type and hardness, making them easy to identify even after many years of use
• The different degrees of stiffness in each axis, gives a stiff mount in parallel with the propeller axel, so it can absorb the pressure force from the propeller and lower stiffness perpendicular to the engine crankshaft. The Marine mount has a different stiffness in the 3 axes, providing long life for couplings and bearings, as well as effective vibration isolation for marine engines.
Applications
In rotating machinery, which requires a good degree of vibration isolation and different stability in the 3 axes. Especially suited for marine applications such as ship engines in relation with ship propellers.
Marine Mounts Small, Medium, Large, X-Large
D
F
C
G
J
A
M
B
Type A(mm)
B(mm)
C(mm)
D(mm)
F(mm)
G(mm)
J(mm) M Weight
(g)
Small 120 38.5 60 100 14 11 11 M12 397
Medium 183 50 75 140 30 13 20 M16 857
Large 228 68 112 182 34 18 26 M20 2250
X-Large 330 112 190 270 22 22 26 M24 9600
Type Load (kg)35 Sh.
Load (kg)40 Sh.
Load (kg)45 Sh.
Load (kg)55 Sh.
Load (kg)65 Sh.
Load (kg)75 Sh.
Small - 35 45 70 95 110
Medium 95 - 120 220 280 400
Large 250 - 350 525 800 1080
X-Large - - 950 1400 2200 3000
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
47
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection, Static Load Small, Medium, Large, X-Large
5 6 7 8 9 10 11 12 13 14 16 18 20
20
25
10
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
Small Marine A40
Small Marni e B45
Small Marine C55
Small Marni e D65
Med ui mMarine B45
Med ui mMarine C55
MediumMarni e D65
Med ui mMarine E75
Large Marine A45
Large Marine B55
MediumMarine A35
Large Marine C65
Large Marine D75
Marni e XL 40
Marni e XL 50
Marine XL 60
Marni e XL702000
2500
3000
1 1.5 2 3 4 5 6 8 1010
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
Small Marine B45
Sma ll Marine4A0
Sma ll Marine C55Sma ll Marni e D65
MediumMarni e
3A5Medium
Marni e B45Medium
Marine C55MediumMarni e E75
Large Marine A45
Large Marine B55
Large Marine C65Large Marin
e D75
MediumMarni e D65
Marni e XL 40
Marine XL 50
Marine XL 60Marni e XL 70
Load
(kg)
Natural Frequency Hz
Load
(kg)
Deflection (mm)
5 6 7 8 9 10 11 12 13 14 16 18 20
20
25
10
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
Small Marine A40
Small Marni e B45
Small Marine C55
Small Marni e D65
Med ui mMarine B45
Med ui mMarine C55
MediumMarni e D65
Med ui mMarine E75
Large Marine A45
Large Marine B55
MediumMarine A35
Large Marine C65
Large Marine D75
Marni e XL 40
Marni e XL 50
Marine XL 60
Marni e XL702000
2500
3000
1 1.5 2 3 4 5 6 8 1010
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
2000
2500
3000
Small Marine B45
Sma ll Marine4A0
Sma ll Marine C55Sma ll Marni e D65
MediumMarni e
3A5Medium
Marni e B45Medium
Marine C55MediumMarni e E75
Large Marine A45
Large Marine B55
Large Marine C65Large Marin
e D75
MediumMarni e D65
Marni e XL 40
Marine XL 50
Marine XL 60Marni e XL 70
Load
(kg)
Natural Frequency Hz
Load
(kg)
Deflection (mm)
48
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
48
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Marine mounts were originally designed for use with marine propulsion engines and are therefore failsafe to accommodate thrust. In recent years, marine mounts are popular across a wide range of industries, offering high performance, simple installation and a cost effective solution for reducing vibration. The mounts provide different stiffnesses in each direction, which provides optimum performance, particularly for internal combustion engines. These mounts can also be supplied with Lloyds Approval.
Applications
Marine propulsion engines, generator sets, diesel engines, vehicles, pumps, and compressors.
Marine Mounts VS, VM, VB
Type A(mm)
B(mm)
C(mm)
D(mm)
F(mm)
G(mm)
J(mm) M
Marine VS 120 38.5 60 100 11 14 11 M12
Marine VM 183 50 75 140 13 30 20 M16
Marine VB 228 74 114 182 18 35 25 M20
Graphs give the max compression load in relation to the individual rubber hardness’s of 45 Sh., 55 Sh, etc.
Marine VS
0 2 4 6
Deflection (mm)
Load (kg)100
75
50
25
0
45Sh
55Sh
65Sh
Marine VM
0 2 4 6
Deflection (mm)
Load (kg)600
450
300
150
0
65Sh
Marine VB
0 3 6 9
Deflection (mm)
Load (kg)1000
750
500
250
0
75Sh
65Sh
45Sh
45Sh
75Sh
55Sh
35Sh
55Sh
M
AD
F
J F
C G
B
M
AD
F
J F
C G
B
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
49
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Marine mounts were originally designed for use with marine propulsion engines and are therefore failsafe to accommodate thrust. In recent years, marine mounts are popular across a wide range of industries. Which is why we now offer it with steel parts in stainless steel, quality AISI 316. The mounts provide different stiffness’ in each direction, which provides optimum performance, particularly for IC engines.
Applications
Marine propulsion engines, generator sets, diesel engines, vehicles, pumps, and compressors. Also for other very corrosive environments such as offshore agricultural and coastal applications.
Marine Mounts VS, VM (AISI 316)
Type A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
Weight (g)
Marine VS AISI 316 100 120 60 60 11x14 11x14 M12 40 400g
Marine VM AISI 316 140 183 75 75 20x13 20x13 M16 50 860g
Marine VS (AISI 316)
0 1.5 3 4.5
Deflection (mm)
Load (kg)120
90
60
30
0
45Sh
55Sh
65Sh
Marine VM (AISI 316)
0 2 4 6
Deflection (mm)
Load (kg)600
450
300
150
0
65Sh
45Sh
75Sh
55Sh
G
B
A
E
C
F
D
H
50
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
50
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mounts Marine VL and VX
Product Description
Marine mounts were originally designed for use with marine propulsion engines and are therefore failsafe and can accommodate thrust. Marine mounts are popular throughout a wide range of industries. Offering high performance, easy installation and are a cost effective solution for reducing vibration. These mountings provide different stiffnesses in each direction, which provides optimum performance, particularly for internal combustion engines. Products can also be supplied with Lloyds Approval.
ApplicationsMarine propulsion engines, generator sets, diesel engines, vehicles, pumps and compressors.
Marine VL
0 3 6 9
Deflection (mm)
Load (kg)1000
750
500
250
0
45Sh
55Sh
65Sh
Marine VX
0 3 6 9
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
60Sh
40Sh
70Sh
50Sh
75Sh
Graphs give the max compression load in relation to the individual rubber hardnesses 45 Sh., 55 Sh. etc.
Marine VL
0 3 6 9
Deflection (mm)
Load (kg)1000
750
500
250
0
45Sh
55Sh
65Sh
Marine VX
0 3 6 9
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
60Sh
40Sh
70Sh
50Sh
75Sh
73mm
M16
13mm
188mm
220mm
33mm11
2mm
M24
220mm
112mm
270mm330mm
135mm
190m
m
73mm
M16
13mm
188mm
220mm
33mm
112m
m
M24
220mm
112mm
270mm330mm
135mm
190m
m
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
51
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mounts CMD
Product Description
The CMD captive mounts is used for engines / equipment with large amplitudes caused by imbalance. It is designed with an integral overload stop which controls the movement of equipment during transit and provides a fully failsafe arrangement. CMD mounts are suitable for both mobile and static applications.
The CMD is a cost effective, high performing and easy to install mount using universal fittings for a wide range of applications.
The rubber is used in shear and compression providing optimum performance. The metal top cap provides protection from contaminants such as oil, fuel and UV rays.
Load ratings up to 130kg.
Applications
Diesel engines, generator gets, pumps, compressors,vehicles, marine engines, and construction plant equipment.
93mm
9.5m
m
M1264mm
2.5mm
76mm
34m
m
CMD
0 1.5 3 4.5
Deflection (mm)
Load (kg)160
120
80
40
0
CMD-3
CMD-2
CMD-0
52
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
52
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The MD mount has a similar design to BSB and BRB. The benefit of this mount is that the rubber compound has high internal damping. The special rubber compound in the type MD mount provides good vibration isolation and stability to equipment with high amplitude vibrations.
Technical Characteristics • Top metal part protects the rubber against fuel, oil and UV rays• Metal parts are electro galvanised• The MD captive mount is a secured damper designed to ensure
that the top and bottom mounting plates are always connected, even when subjected to high shock loads.
Applications This mount is specifically designed to isolate motors, which produce high amplitude vibrations.
Engines with 1-3 cylinders, motor pumps, generators, compressors, fans, etc. This captive mount is suitable for engines and machinery that start and stop frequently. By starting and stopping an engine, it goes through the resonant frequency for the system, which amplifies the vibrations, this is why the MD mount is made with a rubber compound with high internal damping. The MD mount is also preferred under machines with normal speed close to the system’s resonant frequency. MD mounts can be used for diesel engines with few cylinders, especially when the cylinder diameter is large and has a short stroke length. It often means that the engine has high amplitude vibrations and thus requires additional damping to stabilise the engine.
Captive Rubber Mounts MD
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800Type Max Load (kg) Mount Weight (g)
MD A 130 238
MD B 105 238
MD C 70 238
MD D 40 50 238
M1247mm
2.5m
m
34mm
76mm
Ø 64m
m
Ø 9.5mm
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
53
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Hydromounts consist of a spring and a hydraulic shock absorber assembled in a single compact unit. To achieve good insulation, low attenuation is required, and to restrict movement, high attenuation is required. Hydromounts work with these 2 conflicting factors so the optimum conditions are achieved.
Technical Characteristics • The Hydromount is a secured mount designed to ensure that
the top and bottom mounting plates are always connected, even when subjected to high shock loads
• The mount is very robust and is recommended for vehicles that operate in uneven terrain
• Metal parts are electro galvanised
ApplicationsHydromounts are primarily designed for vibration isolation and stability of cabs in vehicles used in rough terrain, agriculture, forestry, etc. In addition to vibration isolation and stability the mount also offers excellent comfort for the operator of the vehicle. Hydromounts are also used to support engines that run at variable speeds and have uneven forces. Examples of this could be one, two or three cylinder engines.
Hydromounts Mini, Small, Medium, Large
FE
K1
K2
H
D1D2
J
D1 D2
HG
E
F
BC
I
A
Type Load (kg) 40 Sh. Load (kg) 50 Sh. Load (kg) 60 Sh. Load (kg) 70 Sh.
Mini 20 30 50 70
Small 60 100 145 180
Medium + Medium Rect. 100 150 200 250
Large + Large Rect. 235 295 345 410
Type A Ø(mm)
B(mm)
C(mm)
D1(mm)
D2(mm)
K1 (mm)
K2(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J (mm)
Mini 45 60 30 64 73 - - 88 90 - 8.2 3 M8
Small 63 88 36 99 109 - - 132 90 40 11 5 M10
Medium 63 96 45 99 109 - - 132 90 40 11 5 M12
Medium Rect. 63 96 45 64 70 79.5 82.5 102 92 - 10.2 5 M12
Large 105 115 55 130 145 - - 180 110 49 11 5 M16
Large Rect. 105 115 55 110 110 110 110 130 130 - 12 5 M20
54
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
54
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Deflection (mm)21 3 4 5 6 7 8
Load
(Kg)
5
10
15
20
30
50
70
100
Hydro Mini 70
Hydro Mini 60
Hydro Mini 50
Hydro Mini 40
Frequency (Hz)3 5 10 15 20 25 35 50 60 80
Stiff
ness
N/m
m
30
40
60
80
100
125
150
200
300Hydro Mini 70
Hydro Mini 60
Hydro Mini 50
Hydro Mini 40
Frequency (Hz)3 5 10 15 20 25 35 50 60 80
Stiff
ness
N/m
m
100
125
150
200
300
Hydro Small 40
Hydro Small 60
Frequency (Hz)2 4 7 10 15 20 26 35 50
Loss
angl
e(º
)
10
12
15
20
30
±3 mm
±1mm
Frequency (Hz)3 5 10 15 20 25 35 50 60 80
Stiff
ness
N/m
m
300
400
500
750
1000
1250
1500
2000
2500
3000
Hydro Large 60
Hydro Large 60
Deflection (mm)21 3 4 5 6 7 8
Load
(Kg)
5
10
15
20
30
50
70
100
150
Hydro Small 60
Hydro Small 40
Deflection (mm)21 3 4 5 6 7 8
Load
(Kg)
10
15
20
30
50
70
100
150
200
300350
Hydro Medium 40Hydro Medium 50Hydro Medium 60Hydro Medium 70
Deflection (mm)21 3 4 5 6 7 8
Load
(Kg)
10
15
20
30
50
70
100
150
200
300350
Hydro Large 60
Hydro Large 50
Hydromounts Mini, Small, Medium, LargeM
ini
Smal
lM
ediu
mLa
rge
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
55
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Captive Rubber Mountings CHM
Product Description
The CHM mount consists of two rubber parts, where the centre of the mount has a metal tube embedded to reduce wear on the rubber, giving a longer life.
This vibration mount is ideal for use where there are large dynamic loads, and where a high level of stability is required. This could, for example be under the cab of many types of vehicles. The CHM mount offers a good level of damping against shock and vibration.
Applications
Vehicle cabs, agricultural and forestry machinery
DC
B
E
A
G
R (Radius)
Q
T
ø F
45 Sh. 60 Sh.
Max. load(kg)
Deflection(mm)
Max. load(kg)
Deflection(mm)Type A
(mm)B
(mm)C
(mm)D
(mm)E
(mm)Ø F
(mm)G
(mm)Q
(mm)T
(max)T
(min) R
CHM 30 12 20 10 9 12 10 33 20 9.5 9.5 1 40 2.0 70 2.5
CHM 50 20 31 19 10 20 14 47.5 31 14 13 2 75 3.7 125 3.5
CHM 65 23 40 24 15 23 17 64 39 22 19 3 115 4.0 250 4.0
CHM 90 25 58 27 22 25 24 89 57 28.6 25 3 250 7.0 440 6.0
56
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
56
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The SCH mount consists of two rubber parts and an embedded metal tube that reduces wear on the rubber and gives longer life.
Technical characteristics
This vibration mount is ideal for use where there are large dynamic loads, and where much stability is required. This could, for example be under the cab of many types of vehicles. SCH mounts offer, in addition to optimal stability, good damping of shock and vibrations.
Applications
• Vehicle cabs• Agricultural and forestry machinery
Sample Guide SCH mounts should be assembled according to the following installation instructions: There are two possible configurations, please see below. They can be installed in plates of varying thicknesses depending on Tmax and Tmin values as indicated in the following table. The mount deflection curve will vary in response to mounting plate thickness.
Chassis Mounts SCH
Anti-rebound washer
Anti-rebound washer
Chassis of the machine
Chassis of the machine
Suspendunit
Suspendedunit
Anti-rebound washer
Anti-rebound washer
Chassis of the machine
Chassis of the machine
Suspendunit
Suspendedunit
Mounted unit
Chassis
Mounted unit
Chassis
B
E
CD
A
G
Ø FQ
T
R (Radius)
45 Sh. 50 Sh. 60 Sh.
Max. load(kg)
Deflection
(mm)
Max. load(kg)
Deflection
(mm)
Max. load(kg)
Deflection
(mm)Type A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
Ø F (mm)
G (mm)
Q (mm)
T (max)
T (min) R
SCH 50 20 32 19 11 21 14 49 31 14 13 2 80 2.0 130 2.5
SCH 65 23 40 24 15 23 17 63,5 39 22 19 3 25 3.7 40 4.0 60 3.5
SCH 90 25 58 31 17 25 23 88 55 29 25 3 40 4.0 80 4.0 100 4.0
SCH 125 32 65 33 22 32 27 126 64 32 25 3 70 7.0 130 6.7 180 6.0
SCH 140 35 70 31 13 35 31 140 70 20 20 4 150 8.0 220 7.0 320 8.0
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
57
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Chassis Mounts SCH
5 8 1040
50
60
70
80
100
150
200
250
300
400
500
600
700
800
1000
1500
2000
2500
SCH 50 45 Tmin
SCH 50 45 Tmax
SCH 65 45 Tmax
SCH 65 45 Tmin
SCH 50 60 Tmin
SCH 65 60 Tmin
SCH 90 45 Tmax
SCH 65 60 Tmax
SCH 90 60 Tmin
SCH 90 60 Tmax
SCH 90 45 Tmin
SCH 50 60 Tmax
1 1.5 2 3 4 5 6
50
60
70
80
100
150
200
250
300
400
500
600
700
800
1000
1500
2000
2500
SCH 50 45
Tmin
SCH 50 45
Tmax
SCH 50 60
Tmax
SCH 50 60
Tmin
SCH 65 45
Tmin
SCH 65 60
Tmin
SCH 90 60
Tmax
SCH 65 60
Tmax
SCH 90 60
Tmin
SCH 90 45
Tm
SCH 90 45
Tmax
SCH 65 45
Tmax
in
Natural Frequency (Hz)
Load
(Kg)
Load
(Kg)
Deflection (mm)
12 16 20 25 30 7
58
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
58
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
SCB mounts consist of two rubber parts with a metal tube inside. The metal tube reduces wear on the rubber and gives longer life. The SCB mount is designed to reduce both tensile and compression forces.
Benefits
• Easy to assemble and install• A simple and economic product with many applications
Chassis Mounts SCB
Ø CA
B
F
D
Q
R
T
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A(mm)
B(mm)
C Ø(mm)
D(mm)
F(mm)
R(mm)
Q(mm)
T Min.(mm)
T Max.(mm)
Load(kg)
Weight(g)
SCB 20 27 15.5 10 20 6.5 1 20.5 4 5 30 20
SCB 25 27 21 10 20 6.5 1 20.5 10 11 50 20
SCB 45 42 25 13 31 10.5 1.5 31 10 11 100 56
SCB 50 49 35 13.5 34 13.5 1.5 34 16 17 200 73
SCB 60 63 31 16 41 16 3 41 9 10 250 108
SCB 65 62 44.5 16.5 40 17 3 40 19 20 250 140
SCB 95 92 51.5 20.5 56 26 3 55.5 19 20 1000 395
Washers are available for each size of mount as an additional part, please contact IAC Acoustics for details.
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Ø CA
B
F
D
Q
R
T
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
59
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The VP mount consists of two concentric steel tubes with a rubber layer vulcanised between them.
Applications
This mount can be used to great advantage as a solution for bedding problems in mobile appliances and machines or between machine parts that can be flexible in relation to each other. As the rubber supports the movement, this flexible connection does not need to be greased or require maintenance.
The VP range has a very high noise and vibration insulating properties which makes it ideal for construction machinery.
Examples of use are flexible bushings in cars, train carriages, tractors and agricultural machines etc.
Flexible Bushings VP
Type
Radial Load Axial Load Torsion Bending Dimensions (mm)
Max. Fr(kg)
Spring Const.
(kg/mm)
Max. Fr(kg)
Spring Const.
(kg/mm)
Max Mv(Nm)
Max ß(degree)
Spring Const.(Nm/
degree)
Max Mb (Nm)
Max α (degree)
Spring Const.(Nm/
degree)
d D L l
VP10/2525 230 200 75 17 5 15 0.3 6 8 0.7 10 25 25 20
VP10/2540 380 235 150 38 6 15 0.4 38 8 4.8 10 25 40 35
VP15/3530 350 300 150 22 9 15 0.6 12 8 1.5 15 35 30 25
VP15/3550 600 650 250 52 15 15 1.0 120 8 15.0 15 35 30 25
VP20/4540 680 400 260 33 24 15 1.6 45 8 5.6 20 45 40 35
VP20/4575 1350 800 550 82 48 15 3.2 365 8 46.0 20 45 75 70
VP25/5045 900 450 380 45 46 14 3.3 96 8 12.0 25 50 45 40
VP25/5085 1800 1050 750 96 69 14 4.9 730 8 92.0 25 50 85 80
VP30/6055 1200 500 510 53 78 14 5.6 135 8 17.0 30 60 55 45
VP30/60100 2500 2000 1050 115 135 14 9.7 1200 8 150.0 30 60 100 90
VP35/6560 1600 850 660 72 93 12 7.7 180 6 23.0 35 65 60 50
VP35/65110 3150 2940 1300 155 200 11 17.0 1560 6 260.0 35 65 110 100
VP40/7065 2050 1700 830 87 138 12 11.5 290 7 41.0 40 70 65 55
VP40/70120 4000 3775 1800 175 240 11 22.0 2520 6 420.0 40 70 120 110
VP45/7570 2400 2000 1000 110 240 12 20.0 320 7 45.0 45 75 70 60
VP45/75130 4000 4235 2000 215 340 10 34.0 5040 6 840.0 45 75 130 120
VP50/8075 2850 3000 1200 135 275 11 25.0 700 7 100.0 50 80 75 65
VP50/80140 4900 4370 2350 265 450 10 45.0 5160 6 860.0 50 80 140 130
D
lL
Fr
Faα
αdMb
Mv
β β
Tolerances:
d: 10-25 ± 0.1 30-50 ± 0.2D: + 0.25 + 0.05l: ± 0.5L: + 0 – 0.2 60° Sh. ± 5 Sh.
60
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
60
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The GE range is an elastic bushing, consisting of two concentric galvanised steel tubes, with a layer of tensile rubber compressed in between.
Applications
The elastic bush works very well as a flexible connection between machine parts. Since it is the rubber that takes up movement, there is no need to grease the bedding or any other maintenance routines.
The elastic bushing also has good vibration and noise reduction qualities that will make machinery more pleasant to work with.Examples of use are in the flexible connectors in cars, train carriages, tractors, agricultural machines etc.
Flexible Bushings GE
Type
Radial Load Axial Load Torsion Bending Dimensions (mm)
Max. Fr(kg)
Spring Const.
(kg/mm)
Max. Fr(kg)
Spring Const.
(kg/mm)
Max Mv(Nm)
Max ß(degree)
Max Mb (Nm)
Max α (degree) d D L l
GE1676 11 0.4 5 0.9 1.0 28 2.0 6 6 16 14 12
GE1462 35 0.3 25 1.0 3.5 21 4.9 2 8 16 20 18
GE1652 53 0.3 41 1.1 4.4 21 1.0 2 8 16 28 25
GE1457 95 0.3 68 1.5 9.8 18 9.8 2 10 22 33 30
GE2000 31 0.5 16 1.5 2.9 28 5.9 6 10 25 18 15
GE2104 87 0.3 80 1.5 9.8 22 8.8 4 10 25 28 25
GE1751 55 0.2 39 1.5 9.8 20 5.9 3 12 25 23 20
GE1917 125 0.1 103 1.5 16.7 20 29.4 2 12 25 38 35
GE1223B 230 0.3 284 2.5 31.4 20 61.8 2 14 27 54 50
GE2054 120 0.2 108 2.0 24.5 17 29.4 3 16 32 32 28
GE2117 300 0.3 265 2.0 45.1 17 107.9 2 16 32 54 50
Tolerances:
d: H 9D: s 6l: ± 0.5L: ± 0.160° Sh. ± 5 Sh.
D
lL
Fr
Faα
αdMb
Mv
β β
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
61
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Cone mounts are specially designed to insulate against medium to high frequencies.
Rubber is bonded to two concentric tubular metal parts. The inner metal part is a conical tube. The outer metal is also tubular and has a flange with mounting holes. This mount comes with washers for mounting.
Technical Characteristics
The conical absorber is a safe and stable mount because it does not allow the equipment to overturn or tilt. They are also flexible enough to prevent transmission of sound and vibration through the structure.
The 2 mounting washers protect the rubber against ozone, ageing and dripping oil. The load / deflection curve for when the mount is fitted with both washers will progressively increase with heavier loads. Installed with the washers, the conical mount can dampen an overload of up to three times the maximum recommended load.
Applications
Cone mounts can be used where there is a requirement for minimal equipment height increase and high radial stability, which this mount provides.
Ship equipment, mobile units, vehicle cabs, trucks and engine suspension are all ideal applications.
Conical Mounts Cone
Type Load kg40 Sh.
Load kg45 Sh.
Load kg50 Sh.
Load kg60 Sh.
Load kg70 Sh.
Weight(g)
Cone 00 - 25 - 50 75 126
Cone 01 - 40 - 70 105 128
Cone 02 - 50 - 90 - 132
Cone 10 - 75 - 140 210 406
Cone 11 - 100 - 180 270 409
Cone 20 - 120 - 200 - 554
Cone 21 - 180 - 300 - 560
Cone 30 140 - 300 - - 1167
Cone 31 - - 310 500 960 1188
Cone 35 - 200 320 450 760 1328
Cone 36 - 400 - 700 1100 1410
Cone 40 - 420 - 690 1080 1216
Cone 60 - 900 - 1250 1560 1821
Cone 70 - 1000 - 2100 2500 3450
Type 00 Cone Type 10 Cone
70 61
6.5
50
84ø8.2
ø46
7.2
231
ø38
68
84 78
106
11
ø12
ø60
18
2.5
52
ø54
Type 01 Cone
Ø8.2
4684
29
12
6.5
50
61
70
38
2.5
62
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
62
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Conical Mounts Cone
6 7 8 9 10 11 12 14 16 18 20 22
20
10
15
20
25
30
40
50
60
70
80
100
150
200
250
300
400
500
600
700
800
10- 45
10- 60
10- 70
30- 40
30- 60
35- 45
35- 50
35- 60
35- 70
20- 45
00- 45
00- 60
00- 70
20- 60
1 1.5 2 3 4 5 6 7
15
20
25
30
40
50
60
70
80
100
150
200
250
300
400
500
600
700
800
10- 45
10- 60
10- 70
30- 40
30- 60
35- 70
35- 60
35-
05
35- 45
20- 45
20- 60
00- 45
00-
06
00- 75
Natural Frequency Hz
Load
(Kg)
Load
(Kg)
Deflection (mm)
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
63
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Ø10.5Ø12.2
48
69.4
2
52
68
112.5
9
88.4
1318
60
106
7884
Type 11 Cone Type 02 Cone
5438
37.5
72.4
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
925
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
6479
.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
Conical Mounts Cone
Type 00 Cone Type 10 Cone
70 61
6.5
50
84
ø8.2
ø46
7.2
231
ø38
68
84 78
106
11
ø12
ø60
182.
552
ø54
Ø10.5Ø12.2
48
69.4
2
52
68
112.5
9
88.4
1318
60
106
7884
Type 11 Cone Type 02 Cone
5438
37.5
72.4
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
5
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 437
.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 1692
106
6470
79.5
82.5
16
R 5.1
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
5
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
64
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
64
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
20
10
15
20
25
30
40
50
60
7080
100
150
200
250
300
400
500
600
700800
1000
1500
18002000
2500
02 - 45
11 - 70
11 -4502 - 60
11 - 60
31 - 50
31 - 60
31 - 70
40 - 45
40 - 60
40 - 7060 - 45
60 - 60
60 - 70
70 - 45
70 - 60
70 - 70
21 - 60
21 - 45
36 - 45
36 - 60
36 - 70
01 - 45
01 - 60
01 70
15
20
25
30
40
50
60
70
80
100
150
200
250
300
400
500
600
700
800
1000
1500
18002000
2500
02 - 45
02 - 60 11 - 45
11 - 6011 - 70
31 - 50
31 - 60
31 - 70
40 - 45
40 - 60
40 - 70
60 - 70
60 - 60
60 - 45
70 - 70
70 - 60
70 - 45
21 - 60
21 - 45
21 - 70
01 - 45
01 - 60
01 --70
36 - 45
36 - 60
36 - 70
Natural Frequency Hz
Load
(Kg)
Load
(Kg)
Deflection (mm)6 7 8 9 10 11 12 14 16 18 20 22 1 1.5 2 3 4 5 6 7
Conical Mounts Cone
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
65
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Conical Mounts Cone
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
5
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
5
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 11282.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
5
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 11282.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
5
21
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
521
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
92
4
2977
4
106
ø16.5
51
ø13.5
R 66
ø 75
74100
ø11
120
90
ø 76
92
521
115
98111
120
98
140
92
16.5
70
70
29 4
77
82.5
106
40
92107
97
11
123
123 97
101
Type 20 Cone Type 21 Cone
64
Type 30 Cone
Type 31 Cone Type 35 Cone
ø 76
Type 40 Cone Type 60 Cone Type 70 Cone
101
76
80
64
79.5
R 5.1
Type 36 Coneø 90
18
82
4
ø 95
10074
90120
ø11
70
79.5
82.5
16
10.2
ø 76
ø 80
6470
82.5
79.5
R 5.1
13 4
37.5
75
16.5
78
38
59.5
16
ø16.5
ø 76
12
19.589.4
5
ø 75
ø 21
ø 67
R 53
110
ø 20.5
86
54
11.5
145
5.5
ø 95
24.5
ø 24.5ø 110
26.5
ø 72.5
ø 112
82.4
ø 90ø16.5
18
ø 95
4
ø16.5
ø 76
ø 16
92
106
6470
79.5
82.5
16
R 5.1
66
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
66
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The AT range of mounts are specially designed to insulate against medium to high frequencies.
Rubber is bonded to two concentric tubular metal parts. The inner metal part is a cylindrical tube. The outer metal is also tubular with a flange with mounting holes.
Function and assembly
When mounting, we recommend using a washer at the top so that there is equal pressure on the upper part. We also recommend using a washer at the bottom so the mounting bolt cannot be drawn through the mount by shock loading.
Technical characteristics
The radial elasticity of the AT range is ¼ of its axial elasticity. It is manufactured in three different hardness’s. Soft: hardness A (45 Sh.), Medium: hardness B (60 Sh.), Hard: hardness C (75 Sh.).
Applications
AT mounts can be used where there is a requirement for minimal equipment height increase and high radial stability, which this mount provides.
Conical Mounts AT
Type A Ø (mm)
B(mm)
C(mm)
D(mm)
E Ø (mm)
F Ø (mm)
G(mm)
H Ø (mm)
I Ø (mm)
J(mm) Fig.
Load (kg)
45 Sh.
Load (kg)
60 Sh.
Load (kg)
75 Sh.
Weight(g)
AT 000 25 11 3 7 6.2 20 4 19 3.2 - 3 6 8 10 -
AT 00 36 28 12.5 11.5 8.1 26 12 26 5.2 - 3 20 30 40 39
AT 01 48 40 18 18 12.1 37.5 8 - - - 1 50 65 80 -
AT 02 48 51 24 18 12.1 37.5 8 - - - 1 65 85 110 144
AT 10 60 47 20 18 12.2 49 8 69 8.2 73 4 70 100 120 -
AT 11 60 60 31 18 12.2 49 8 69 8.2 73 4 85 120 150 250
AT 20 70 55 27 19 18.2 55.7 10 - - - 1 100 150 180 344
AT 21 (Round) 70 70 39 19 18.2 55.7 10 - - - 1 135 190 250 437
AT 21 (Tri.) 70 70 39 19 18.2 55.7 10 80 8.5 86 4 - - - 437
AT 30 90 75 29 28 20.2 65 16 78 8.5 - 2 175 240 300 522
AT 31 (Round) 90 95 47 28 20.2 65 - - - - 1 250 350 420 775
AT 31 (Tri.) 90 95 47 28 20.2 65 16 95 8.5 - 4 250 350 420 775
AT 40 (Tri.) 100 90 42 28 22.2 74 18 100 8.5 112 1 - 4 225 320 380 789
AT 41 100 110 49 28 22.2 74 18 100 8.5 112 1 - 4 250 360 480 895
AT 50 120 100 47 33 40.2 86 20 114 8.5 - 4 325 440 550 1305
AT 51 120 120 63 53 40.2 86 20 114 10.5 - 2 400 550 670 1494
AT 70 (Round) 165 98 36 46 60.2 118 22 145 10.5 - 2 450 600 800 3124
AT 70 165 140 66 46 60.2 118 22 145 10.5 - 2 700 900 1100 3124
AT 71 165 170 96 46 60.2 118 22 145 10.5 - 2 850 1100 1400 3790
AT 80 230 167 95 53 80 170 30 204 12.2 - 2 1250 1800 2300 7096
AT 81 230 185 113 53 80 170 30 204 12.2 - 2 1600 2100 2600 7702
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
67
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Conical Mounts AT
G I G
H
G
H
I G H
I
J
ø A
DC
B
EF
ø A
DC
B
E
F
1 1.5 2 3 4 5 6 8 10 120.5 1 1.5 2 3 4 5 61
2
5
8
10
15
20
2530
40
50607080
100
150
200
250300
2530
40
50
607080
100
150
200
250300
400
500
600700800
1000
150018002000
25003000
Load
(kg)
Deflection (mm) Deflection (mm)
Load
(kg)
AT2175
AT1175
AT2075
AT0275
AT2160
AT0175
AT2060
AT0075
AT0260
AT1160AT2145
AT0160AT1060
AT2045
AT2045
AT0060
AT0145
AT1145
AT1045
AT0045
AT00075
AT00060
AT00045
AT8175AT8075
AT7175
AT7075
AT8160
AT5175
AT7160
AT8060
AT70R75AT7060
AT4175 AT5160
AT8145
AT7145AT8045
AT3075AT3175
AT7045
AT70R60
AT4075AT5060
AT3160 AT5045
AT4160
AT4060
AT70R45
AT3060 AT3145
AT4145
AT4045
AT3045
68
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
68
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The FDA range is designed for the support of machines operating at more than 500 RPM, for loads ranging from 12 to 100kg.
Components
• Steel spring• Rubber insert• Galvanised steel mounting plate• Optional rubber base plate
Elastical characteristics
Vertical natural frequency from 3.5Hz.
Applications
Especially for machines running at low RPM’s such as gensets, compressors, fans, pumps and refrigerating units etc.
Open Spring Mounts FDA
ø B
A
C
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A(mm)
B Ø(mm) C
FDA 25 80 54 M8
FDA 25 with base plate 87 54 M8
FDA 50 80 54 M8
FDA 50 with base plate 87 54 M8
FDA 75 80 54 M8
FDA 75 with base plate 87 54 M8
FDA 100 80 54 M8
FDA 100 with base plate 87 54 M8
FDA 125 80 54 M8
FDA 125 with base plate 87 54 M8
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
69
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The FDA1 range is designed for the support of machines operating at more than 500 RPM, for loads ranging from 50 to 750kg.
Components
• Steel spring• Rubber insert• Galvanised steel mounting plate (mounting plate is rubber coated
for FDA1-150, 200, 250 and 350)• FDA1-150 to FDA1-350 have a steel with rubber baseplate and
for the FDA1-500 to FDA1-0750 it is an all steel baseplate
Elastical characteristics
Vertical natural frequency from 2.9Hz.
ApplicationsEspecially for machines running at low RPM’s such as gensets, compressors, fans, pumps, refrigerating units etc.
Open Spring Mounts FDA1
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
TYPE A Ø(mm)
B(mm) C D
(mm)E
(mm)F Ø
(mm)L
(mm)
FDA1-150 75 120 M12 75 87 10 115
FDA1-200 75 120 M12 75 87 10 115
FDA1-250 75 120 M12 75 87 10 115
FDA1-350 75 120 M12 75 87 10 115
FDA1-500 90 130 M14 100 120 12 150
FDA1-750 90 130 M14 100 120 12 150
C
ø A
B
E
D
F
L
70
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
70
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The FDA2 range is designed for the suspension of machines operating at more than 350 RPM, for loads ranging from 150 to 1500kg.
Components
• Steel spring• Rubber insert• Painted steel mounting plate
Elastical characteristics
For: FDA 2-300, FDA 2-400, FDA 2-500 and FDA 2-700, vertical natural frequency is from 2.9Hz.For: FDA 2-1000, FDA 2-1500, vertical natural frequency is from 3.7Hz.
Applications
Especially for machines running at low RPM’s such as gensets, compressors, fans, pumps and refrigerating units etc.
Multiple Open Spring Mounts FDA2
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A(mm)
B(mm)
C(mm)
D Ø (mm)
E(mm)
FDA2-300 200 124 75 12 170
FDA2-400 200 124 75 12 170
FDA2-500 200 124 75 12 170
FDA2-700 200 124 75 12 170
FDA2-1000 250 134 100 14 210
FDA2-1500 250 134 100 14 210
E
B
C
ø D
A
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
71
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The FDA3 range is designed for the suspension of machines operating at more than 350 RPM. For loads ranging from 225 to 2225 kg.
Components
• Steel spring• Rubber insert• Painted steel mounting plate
Elastical characteristics
For: FDA 3-450, FDA 3-600, FDA 3-750 and FDA 3-1050, vertical natural frequency is from 2.9Hz.For: FDA 3-1500, FDA 3-2250, vertical natural frequency is from 3.7Hz.
Applications
Especially for machines running at low RPM’s such as gensets, compressors, fans, pumps and refrigerating units etc.
Multiple Open Spring Mounts FDA3
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
TYPE A(mm)
B(mm) C D Ø
(mm)
FDA3-450 190 124 M16 12
FDA3-600 190 124 M16 12
FDA3-750 190 124 M16 12
FDA3-1050 190 124 M16 12
FDA3-1500 242 134 M20 14
FDA3-2250 242 134 M20 14
A
B
C
ø D
72
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
72
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The FDA4 and FDA5 ranges are designed for the suspension of machines operating at more than 350 RPM, for loads ranging from 300 to 3750kg.
Components
• Steel spring• Rubber insert• Painted steel mounting plate
Elastical characteristics
For: FDA 4-600 – 4-1400 and FDA 5-750 – 5-1750, vertical natural frequency is from 2.9Hz.For: FDA 4-2000, 4-3000 and FDA 5-2500, 5-3750, vertical natural frequency is from 3.7Hz.
Applications
Especially for machines running at low RPM’s such as gensets, compressors, fans, pumps and refrigerating units etc.
Multiple Open Spring Mounts FDA4 & FDA5
FE
ø D
C
A
B
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A (mm) B (mm) C D Ø (mm) E (mm) F (mm)
FDA4-600 - 1400 200 124 M16 12 150 170
FDA4-2000 - 3000 250 134 M20 14 200 210
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A (mm) B (mm) C (mm) D Ø (mm) E (mm)
FDA5-750 - 1750 280 124 150 16 248
FDA5-2500 - 3750 350 134 200 18 300
A
ø D
C E
B
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
73
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The FDA6 and FDA9 ranges are designed for the suspension of machines operating at more than 350 RPM, for loads ranging from 450 to 6750kg.
Components
• Steel spring• Rubber insert• Painted steel mounting plate
Elastical characteristics
For: FDA 6-900 – 6-1200 and FDA 9-1350 – 9-3150, vertical natural frequency is from 2.9Hz.For: FDA 6-3000, 6-4500, 9-4500 and 9-6750 vertical natural frequency is from 3.7Hz
Applications
Especially for machines running at low RPM’s such as gensets, compressors, fans, pumps and refrigerating units etc.
Multiple Open Spring Mounts FDA6 & FDA9
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A (mm) B (mm) C (mm) D Ø (mm) E (mm)
FDA6-900 - 2100 280 124 150 16 248
FDA6-3000 & 4500 350 134 200 18 300
MD A
AD 1215
0 1 2 3
Deflection (mm)
Load (kg)8
6
4
2
0
AD 2015
0 1 2 3
Deflection (mm)
Load (kg)40
30
20
10
0
AD 3025
0 1 2 3
Deflection (mm)
Load (kg)80
60
40
20
0
AD 4030
0 1 2 3 4
Deflection (mm)
Load (kg)1000
800
600
400
200
0
AD 5035
0 1 2 3 4
Deflection (mm)
Load (kg)160
120
80
40
0
AD 7535
0 1 2 3
Deflection (mm)
Load (kg)400
300
200
100
0
AD 10050
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
0 1 2 3 4 5
Deflection (mm)
Load (kg)100
80
60
40
20
0
ADF 4020
1003
0
7535
5035
0 2 4 6 8 10
Deflection (mm)
Load (kg)500
400
300
200
100
0
ADM
0 2 4 6 8 10
Deflection (mm)
Load (kg)1500
1200
900
600
300
0
ADP 14040
0 1 2 3 4
Deflection (mm)
GB 2517Load (kg)20
15
10
5
0
55 SH
40 SH
0 4 8 12 16 20
Deflection (mm)
Load (kg)80
60
40
20
0
GB 3036
0 10 20 30 40
Deflection (mm)
Load (kg)400
300
200
100
0
GB 5068
0 2 4 6 8
Deflection (mm)
GB 5045Load (kg)400
300
200
100
0
0 5 10 15 20 25 30
Deflection (mm)
Load (kg)500
400
300
200
100
0
GB 7590
0 10 20 30 40
Deflection (mm)
GB 90110Load (kg)1000
800
600
400
200
0
White hollow
White
0 1 2 3 4 5
FA 503520
15
10
5
0
Load (kg)
Deflection (mm)
White hollow
White
0 1 2 3 4 5 6
120
80
40
0
FA 6535Load (kg)
Deflection (mm)
0
50
100
150
200
250
0 2 4 6 8 10 12
Deflection (mm)
14
IAC SD 4343Load (kg)
0 1 2 3 4 5
Deflection (mm)
Load (kg)800
600
400
200
0
SANDWICH 100
0 1 2 3 4 5
Deflection (mm)
Load (kg)1000
800
600
400
200
0
SANDWICH 200
0 1 2 3 4 5
Deflection (mm)
Load (kg)2000
1500
1000
500
0
SANDWICH 400
0 1 2 3 4 5
Deflection (mm)
Load (kg)4000
3000
2000
1000
0
SANDWICH 500
0 1 2 3 4 5
Deflection (mm)
Load (kg)10000
8000
6000
4000
2000
0
SANDWICH 600
0 1 2 3 4 5
Deflection (mm)
Load (kg)16000
12000
8000
4000
0
SANDWICH 700
1 1.5 2 3 4 510
15
20
25
30
40
50607080
100
150
MD C
MD B
MD D 40
MD A
Deflection (mm)
Load (kg) MD
10
15
20
2530
40
5060
80
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45SCB 50
SCB 60-65
SCB 95
SCB 20
10 15 20 40 50 6030 75
Load (kg) SCB
10
15
20
2530
40
50607080
100
150
200
250300
400
500600700800
1000
SCB 25
SCB 45
SCB 60 -65
SCB 50
SCB 95
SCB 20
0.2 1 1.5 20.5 2.5 3
Load (kg)
Deflection (mm)Natural Frequency (Hz)
SCB
25
0
50
75
100
125
150
0 5 10 15 20
Load (kg) FDA
Deflection (mm)
FDA-100
FDA-75
FDA-50
FDA-25
Deflection (mm)
Load (kg) FDA1
0 4 8 12 16 20 24 28 32 36 40
150
300
450
600
750
900Load (kg) FDA2
FDA1-750
FDA1-500
FDA1-350
FDA1-250
FDA1-200
FDA1-150
FDA2-1500
FDA2-1000
FDA2-700
FDA2-500
FDA2-400
FDA2-300300
600
900
1200
1500
1800
Deflection (mm)
Load (kg) FDA3
225
450
675
900
1125
1350
1575
1800
2025
2250
2475
2700
0 3 6 9 12 15 18 21 24 27 30
0 0
0
FDA3-2250
FDA3-1500
FDA3-1050
FDA3-750
FDA3-600
FDA3-450
Deflection (mm)
0
Deflection (mm)
Load (kg) FDA4
0 3 6 9 12 15 18 21 24 27 30
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
FDA4-3000
FDA4-2000
FDA4-1400
FDA4-1000
FDA4-600
0
Deflection (mm)
Load (kg) FDA5
0 3 6 9 12 15 18 21 24 27 30
375
750
1125
1500
1875
2250
2625
3000
3375
3750
4125
3500
FDA5-3500
FDA5-2500
FDA5-1750
FDA5-1250
FDA5-1000
FDA5-750
0
Deflection (mm)
Load (kg) FDA6
0 3 6 9 12 15 18 21 24 27 30
450
900
1350
1800
2250
2700
3150
3600
4050
4500
4950
5400
FDA6-4500
FDA6-3000
FDA6-2100
FDA6-1500
FDA6-1200
FDA6-900
0
Deflection (mm)
Load (kg) FDA9
0 3 6 9 12 15 18 21 24 27 30
675
1350
1950
2700
3375
4050
4725
5400
6075
6750
7425
8100
FDA9-6750
FDA9-4500
FDA9-3150
FDA9-2250
FDA9-1800
FDA9-1350
0
FDA-125
3 8 9 12 15 18 21 24 27 30
FDA4-800
Type A (mm) B (mm) C (mm) D Ø (mm) E (mm)
FDA9-1350 - 3150 280 124 226 16 248
FDA9-4500 & 6750 350 134 300 18 300
A
E
C
ø D
B
A
CE
B
ø D
74
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
74
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Spring Mounts SM, SMD, SM2 & SMD2
Product Description When installing a diesel engine generator set, or other rotating equipment, it is important to reduce vibration and structureborne noise to the building in which the engine is located. When designing an isolation system for a generator set some of the factors to consider include:
• Mass of equipment• Mass of floor• Stiffness of floor• Vibratory force produced by equipment• Frequency of rotating equipment• Natural frequency of isolators• Natural frequency of floor
Spring InterchangeabilitySM isolators are designed to accommodate all of the different rated springs. This means you can change springs without changing other parts of the isolator, such as housings.
Installation Instructions1. Position isolator on a level surface under equipment leg2. Loosen adjustable snubbers to allow full deflection (Model SMD)3. Insert mounting bolt through equipment rail and screw down into
the isolator. About 6-7 turns.4. Tighten lock nut securely to equipment leg.
The following steps are for Model SMD only.5. Finger tighten adjustable snubber bolts.6. Operate the equipment. If movement is excessive tighten snubber
bolts 1/4 turn at a time on each isolator until movement is at allowable level.
1-2. Housing Materials — Ductile cast iron is standard on non seismic single spring isolators. Cold rolled steel plate is used for all other spring isolators.3. Springs — Oil tempered chrome silicon steel is used on the standard springs.4. Internal Dampening — All IAC Acoustics SM isolators incorporate internal neoprene side dampening. This dampening limits the machine vibration while the engine passes through the start-up resonant frequency.5. IAC Acoustics Sound Pad — To provide a non-skid surface and to increase isolation efficiency, the IAC Acoustics Sound Pad is installed on all SM and SMD isolators.6. Side Snubber — Side snubber is standard on the SMD and SMD2 non seismic models.7. Level Adjusting Bolt — All IAC Acoustics SM and SMD isolators have an external adjustment that is long enough to accommodate a 50mm (2”) base channel.
Spring Colour
Single Spring Isolator Max Load Double Spring Isolator Max Load
Without Side Snubber
Deflection at Rated
Load
With Side Snubber
Deflection at Rated
Load(kg) (lbs) Without Side
Snubber
Deflection at Rated
Load
With Side Snubber
Deflection at Rated
Load(kg) (lbs)
Blue SM-150 25mm / 1” SMD-150 25mm / 1” 68 150 SM2-300 25mm / 1” SMD2-300 25mm / 1” 136 300
Grey SM-250 25mm / 1” SMD-250 25mm / 1” 113 250 SM2-500 25mm / 1” SMD2-500 25mm / 1” 227 500
Pink SM-450 25mm / 1” SMD-450 25mm / 1” 204 450 SM2-900 25mm / 1” SMD2-900 25mm / 1” 408 900
Black SM-550 25mm / 1” SMD-550 25mm / 1” 249 550 SM2-1100 25mm / 1” SMD2-1100 25mm / 1” 499 1100
White SM-750 25mm / 1” SMD-750 25mm / 1” 340 750 SM2-1500 25mm / 1” SMD2-1500 25mm / 1” 680 1500
Brown SM-1050 25mm / 1” SMD-1050 25mm / 1” 476 1050 SM2-2100 25mm / 1” SMD2-2100 25mm / 1” 953 2100
Orange SM-1250 25mm / 1” SMD-1250 25mm / 1” 567 1250 SM2-2500 25mm / 1” SMD2-2500 25mm / 1” 1134 2500
Green SM-1450 25mm / 1” SMD-1450 25mm / 1” 658 1450 SM2-2900 25mm / 1” SMD2-2900 25mm / 1” 1315 2900
Yellow SM-1800 25mm / 1” SMD-1800 25mm / 1” 816 1800 SM2-3600 25mm / 1” SMD2-3600 25mm / 1” 1633 3600
Beige SM-2200 25mm / 1” SMD-2200 25mm / 1” 998 2200 SM2-4400 25mm / 1” SMD2-4400 25mm / 1” 1996 4400
Red SM-2500 25mm / 1” SMD-2500 25mm / 1” 1134 2500 SM2-5000 25mm / 1” SMD2-5000 25mm / 1” 2268 5000
Navy SM-3000 25mm / 1” SMD-3000 25mm / 1” 1361 3000 SM2-6000 25mm / 1” SMD2-6000 25mm / 1” 2722 6000
3”3”
7 ½”
7
23
4
1 5
7
23
4
1
5
6
Recommended Bolt Size ½”SAE Grade 8
6”
7 ½”
6”
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
75
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
SM
SM2
3”3”
7 ½”
7
23
4
1 5
7
23
4
1
5
6
Recommended Bolt Size ½”SAE Grade 8
6”
7 ½”
6”
SMD
7”
¼”
4”
7”
¼”
4”
7
2
3
4
1
5
7
2
3
4
15 6
Recommended Bolt Size ½”SAE Grade 8
11 ½”
9¾”
11 ½”
9¾”
SMD2
Spring Mounts SM, SMD, SM2 & SMD2
76
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
76
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description The design of IAC Acoustics isolators optimises both vibration isolation efficiency and cost efficiency because the springs are interchangeable within the same housing.
Seismic ZonesIAC Acoustics seismic isolators are designed according to the BOCA National Building Code/1999 and are especially designed for use in zone 4 but can be used in applications for zones 1-3.
SpringsOil tempered and chrome silicon steel is used on the standard springs.
Internal DampeningAll IAC Acoustics isolators incorporate internal neoprene-shear rubber-sided dampening. This dampening limits the machine vibration while the engine passes through the start-up resonant frequency.
IAC Acoustics Sound PadTo provide a non-skid surface and to increase isolation efficiency, the IAC Acoustics sound pad is installed on all isolators.
Level Adjusting BoltAll SM isolators have an external adjustment that is long enough to accommodate a 2” base channel.
Construction1. Springs Oil tempered and chrome silicon steel is used on the standard
springs. 2. Housing Materials Cold rolled steel plate.3. IAC Acoustics Sound Pad To provide a non-skid surface and to increase isolation efficiency,
the IAC Acoustics sound pad is installed on all isolators. 4. Level Adjusting Bolt All IAC Acoustics isolators have an external adjustment that is long
enough to accommodate a 50.8mm (2”) base channel.
Seismic Spring Mount S4
Spring Colour Part No. Deflection at
Rated LoadMax Load
(kg) (lbs)
White SMD2-S4-1500 25mm / 1” 680 1500
Brown SMD2-S4-2100 25mm / 1” 953 2100
Orange SMD2-S4-2500 25mm / 1” 1134 2500
Green SMD2-S4-2900 25mm / 1” 1315 2900
Yellow SMD2-S4-3600 25mm / 1” 1633 3600
Beige SMD2-S4-4400 25mm / 1” 1996 4400
Red SMD2-S4-5000 25mm / 1” 2268 5000
Navy SMD2-S4-6000 25mm / 1” 2722 6000
7 ½”Uncompressed
Free Height
¾”Bolt
1 ½Max.
AllowableCompression
13”1”
1”
41
3
2
2
3
6”
16”1”
1”
10”
¾”Bolt
1 ½”Max.
AllowableCompression
7 ½”Uncompressed
Free Height
4
1
3
2
2
3
Spring Colour Part No. Deflection at
Rated LoadMax Load
(kg) (lbs)
Blue SMD-S4-150 25mm / 1” 68 150
Grey SMD-S4-250 25mm / 1” 114 250
Pink SMD-S4-450 25mm / 1” 204 450
Black SMD-S4-550 25mm / 1” 250 550
White SMD-S4-750 25mm / 1” 340 750
Brown SMD-S4-1050 25mm / 1” 476 1050
Orange SMD-S4-1250 25mm / 1” 567 1250
Green SMD-S4-1450 25mm / 1” 658 1450
Yellow SMD-S4-1800 25mm / 1” 816 1800
Beige SMD-S4-2200 25mm / 1” 998 2200
Red SMD-S4-2500 25mm / 1” 1134 2500
Navy SMD-S4-3000 25mm / 1” 1360 3000
Single Spring
Double Spring
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
77
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The VRA1 range of spring vibration isolators consist of a spring, steel plate and rubber mats. The two side connecting guide threads join the upper cover and base support together into a whole restraining vertical movement. The threads also provide control of horizontal movement. The rubber mat on the base plate aids in isolating against higher frequencies and also has anti-skid properties.
Applications
Pumps, cooling towers, chillers and HVAC plant equipment.
Restrained Spring Mounts VRA1
Model Load (kg)
Load (lbs) Deflection Vertical Stiffness
(kg/mm)Vertical Stiffness
(lbs/in)
VRA1-010 10 22
50mm (2”)
0.20 11
VRA1-020 20 44 0.40 22
VRA1-030 30 66 0.60 34
VRA1-040 40 88 0.80 45
VRA1-050 50 110 1.00 56
VRA1-060 60 132 1.20 67
VRA1-070 70 154 1.40 78
VRA1-080 80 176 1.60 90
VRA1-100 100 220 2.00 112
VRA1-120 120 265 2.40 134
VRA1-140 140 309 2.80 157
VRA1-160 160 353 3.20 179
VRA1-180 180 397 3.60 202
VRA1-200 200 441 4.00 224
VRA1-230 230 507 4.60 258
VRA1-250 250 551 5.00 280
VRA1-300 300 661 6.00 336
VRA1-330 330 728 6.60 370
VRA1-360 360 794 7.20 403
VRA1-400 400 882 8.00 448
VRA1-500 500 1102 10.00 560
ModelOuter Size (±2mm ±5/64”)
L(mm)
C(mm)
W(mm)
Ø D(mm)
H*(mm) S S2
VRA1-010 ~ VRA1-500
196(7.7”)
170(6.7”)
95(3.7”)
13.5(0.6”)
170(6.70”)
M10x30(3/8”x1.25”)
M20x60(3/4”x2.5”)
* unloaded height
78
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
78
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The VRH2 series of spring vibration isolators consists of 2 springs, steel plates and rubber mats. The two side connecting guide threads join the upper cover and base support together to restrain vertical movement. The threads also provide control of the horizontal movement. The rubber mat on the base plate is used to isolate higher frequencies and has anti-skid properties.
Applications
Pumps, cooling towers, chillers and HVAC plant equipment.
Restrained Spring Mounts VRA2
Model Load (kg)
Load (lbs) Deflection Vertical Stiffness
(kg/mm)Vertical Stiffness
(lbs/in)
VRA2-250* 250 551
50mm (2”)
5.00 280
VRA2-280* 280 617 5.60 313
VRA2-320* 320 705 6.40 358
VRA2-360* 360 794 7.20 403
VRA2-400 400 882 8.00 448
VRA2-460* 460 1014 9.20 515
VRA2-500 500 1102 10.00 560
VRA2-600 600 1323 12.00 672
VRA2-720 720 1387 14.40 806
VRA2-800 800 1764 16.00 896
* are stocked items
ModelOuter Size (±2mm ±5/64”)
L(mm)
C(mm)
W(mm)
Ø D(mm)
H*(mm) S S2
VRA2-250 ~ VRA2-800
230(9”)
210(8.25”)
172(6.75”)
14(0.60”)
189(7.50”)
M10x30(3/8”x1.25”)
M20x60(3/4”x2.5”)
* unloaded height
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
79
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The VRH4 series of spring vibration isolators are made up with 4 springs, steel plates and rubber mats. The two side connecting guide threads join the upper cover and base support together to restrain vertical movement. The threads also provide control of the horizontal movement. The rubber mat on the base plate is used to isolate higher frequencies and has anti-skid properties.
Applications
Pumps, cooling towers, chillers and HVAC plant equipment.
Restrained Spring Mounts VRA4
ModelOuter Size (±2mm ±5/64”)
A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
H*(mm)
D1(mm)
D2(mm) S
VRA4-1000 ~ VRA4-6000 331 184 150 265 110 110 268 Ø18 M14 M27x80
* unloaded height
Model Load(kg)
Load (lbs)
Deflection (mm)
Vertical Stiffness (kg/mm)
Vertical Stiffness (lbs/in)
VRA4-1000 1000 2204
50mm(2”)
20.0 1102
VRA 4-2000 2000 4409 40.0 2204
VRA 4-2700 2700 5952 54.0 2976
VRA 4-3200 3200 7054 64.0 3527
VRA 4-4000 4000 8818 80.0 4409
VRA 4-4400 4400 9700 88.0 4850
VRA 4-5000 5000 11022 100.0 5511
VRA 4-5500 5500 12125 110.0 6062
VRA 4-6000 6000 13227 120.0 6613
80
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
80
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The anti-seismic range of vibration isolators is designed for installations in seismic zones.
When a seismic event occurs, the anti-seismic design prevents installation failure in a horizontal direction. They can reduce the vibration passed to the equipment and vice-versa reduce equipment vibration passing to the structure, this can also have the effect of prolonging the life of the equipment.
They are composed of a lower body and upper cover each with a rubber facing mat. The two-part connecting guide pillars join the upper cover and lower body together. the design is capable of withstanding the horizontal forces from seismic events. The rubber mat on the base and top plates aid in isolating against higher frequencies and also have anti-skid properties. Use the below tables to choose the correct mount according to the application and plant loadings.
Seismic Spring Mounts SSM
Model Load (kg) Load(lb)
Deflection (mm)
Vertical Stiffness (kg/mm)
Vertical Stiffness (lbs/in)
SSM-50 50 110
25(1”)
2.00 112
SSM-60 60 132 2.40 134
SSM-70 70 154 2.80 157
SSM-80 80 176 3.20 179
SSM-100 100 220 4.00 224
SSM-120 120 265 4.80 269
SSM-140 140 309 5.60 314
SSM-160 160 353 6.40 358
SSM-180 180 397 7.20 403
SSM-200 200 441 8.00 448
SSM-230 230 507 9.20 515
SSM-250 250 551 10.00 560
SSM-300 300 661 12.00 672
SSM-360 360 794 14.40 806
SSM-400 400 882 16.00 896
SSM-500 500 1102 20.00 1120
SSM-600 600 1323 24.00 1344
S
H
W
C2
C1
L
øD
ModelOuter Size (±2mm ±5/64”)
L(mm)
C1(mm)
C2(mm)
W(mm)
Ø D(mm)
H*(mm) S
SSM-50 ~ SSM-600
250 (9.8”)
220(8.7”)
146(5.7”)
100(3.9”)
16.5(0.6”)
126(5.0”)
M16×45(5/8”x1.8”)
* unloaded height
S
H
W
C2
C1
L
øD
S
H
W
C2
C1
L
øD
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
81
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The anti-seismic series vibration isolators are designed for installation in seismic zones. The anti-seismic design will prevent installation failure in horizontal direction. It can reduce vibration efficiently to ensure noise reduction and long life of the equipment. They are composed of a body, upper cover, base support and rubber mat. The two side connecting guide pillars join the upper cover and base support as a whole, which is capable of withstanding horizontal forces from seismic events. The rubber mat on the base and top plates aid in isolating against higher frequencies and also have anti-skid properties Use the below tables to choose the correct mount according to the application and plant loadings. This product, with a semi-closed structure can be installed and fixed through side installation holes.
Applications
Includes: Fans, compressors, chillers and HVAC equipment.
Model Load (kg)
Load(lb)
Deflection (mm)
Vertical Stiffness (kg/mm)
Vertical Stiffness (lbs/in)
SSM2-120 120 265
25(1”)
4.80 269
SSM2-160* 160 353 6.40 358
SSM2-200 200 441 8.00 448
SSM2-240* 240 529 9.60 538
SSM2-320 320 705 12.80 717
SSM2-360* 360 794 14.40 806
SSM2-460 400 882 18.40 1030
SSM2-500* 500 1102 20.00 1120
SSM2-560 560 1235 22.40 1254
SSM2-660 660 1455 26.40 1478
SSM2-720* 720 1587 28.80 1613
SSM2-800 800 1764 32.00 1792
SSM2-900 900 1984 36.00 2016
SSM2-1000 1000 2205 40.00 2240
SSM2-1200 1200 2646 48.00 2688
SSM2-1400 1400 3086 56.00 3136
* stocked items
Seismic Spring Mounts SSM2
H
S
W
C2
C1
L
øD
ModelOuter Size(±2mm)
L(mm)
C1(mm)
C2(mm)
W(mm)
Ø D(mm)
H*(mm) S
SSM2-120 ~ SSM2-1400
250 (9.8”)
220(8.7”)
146(5.7”)
150(5.9”)
16.5(0.6”)
126(5.0”)
M16×45(5/8”x1.8”)
* unloaded height
H
S
W
C2
C1
L
øD
H
S
W
C2
C1
L
øD
82
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
82
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Two adjustable galvanised, curved metal fittings with a vibration absorber in between. The fittings allow adjustment of the angle between the vibration absorber and direction of load, so that the maximum vibration insulation can be achieved.
Maximum axial load: 15 – 40 kgMaximum axial distortion: 3.0 mmMaximum radial load: 4 – 8 kgMaximum radial distortion: 5.4 mm
Applications
Mainly for light equipment and machinery such as suspended cabinets containing machinery, electronics, alarm systems, automation instruments, computer equipment and many more, that are sensitive to shock and vibration.
Can also be used to protect components in a ships’ machine room and is ideally used to insulate passive equipment against vibrations from rotating machinery.
When installing the Rahbek mount it is possible to adjust the natural frequency of the system in horizontal, vertical and lateral direction and thereby optimise the vibration insulation in all these directions.
Mounting
This mount is fixed between the wall and the apparatus, as it is shown in the figure to the right. The axial direction of the vibration mount should pass through the centre of gravity of the apparatus. The degree of resilience of the mount, and therefore the natural frequency, can be regulated as V1 and V2 can be adjusted.
V1 and V2 should be situated at intervals of 0-45° and 22-45° respectively. The radial stiffness of the absorber is 1/6 of the axial, so when loaded it should be mainly in the direction of compression.
Cabinet Mounts Rahbek
V1 V2
H
D1
B
P maxM6
5020
Type D1(mm)
H(mm)
P Max.(kg) B
4 20 15 15 25
5 20 20 20 25
6 25 20 25 25
6a 30 25 32 25
7a 30 30 40 25
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
83
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Vibration isolator with rubber vulcanised to galvanised steel plates. The VTOE is made as a captive type of mount that will still hold the equipment if the rubber should break or fail.
VTOE is used as the upper support when hanging electrical cabinets and other similar equipment on walls or from the ceiling. The VTN is used as the lower support for wall mounting and is not a captive type mount.
Vikas Ceiling and Wall Mount VTOE – VTN
ModelM max (kg) F max (kg)
40 Sh. 60 Sh. 40 Sh. 60 Sh.
VTOE Upper 14 25 30 70
VTN lower 14 25 30 70
Dimensions A D E G H K N t
VTOE Upper 96 9 75 M8 33 114 15 1.5
VTN Lower 96 9 75 M8 33 114 15 1.5
E
D
N
A K G
t
HE
D
N
A K G
t
H
M M
F F
VTOE VTN
VTN
VTOE
VTOE VTOE
Example
84
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
84
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description Spring isolator for vibration isolation of suspended equipment and installations.
These hangers offer great vibration isolation because of the large deflection provided of up to 30mm.
ApplicationsThe ceiling suspender is used for sound insulation in connection with hanging plain plasterboard ceilings.
The ceiling hanger is designed to isolate vibration from the suspended ceiling and the structural slab.
The wall mount is used in connection with the fixing of a sound insulating staggered plasterboard wall.
DampingField measurements show that the sound insulated ceilings improve the sound insulation of the floor, horizontal division by up to 10 dB.
The apparent sound reduction index R’w is typically 58-60dB, but depends on the construction of the existing ceiling.
A sound insulated staggered wall reduces the air-transmitted noise by approximately 8-12 dB, depending on the construction of the existing wall.
Advantages• The ceiling suspender and wall mount provide optimal insulation
against airborne noise• Fire resistant construction. Lagging class 1 (DS 1065.2)• Easy to fit and capable of accommodating unevenness in existing
ceilings or walls
MountingThe acoustic ceiling has to hang free without direct coupling to other walls and pipes etc.
The sound insulating wall is fitted without direct coupling to other walls, ceiling and pipe penetrations.
Elastic joints are made between the sound ceiling and the wall, pipes, wires etc. during fitting.
The ceiling suspensions and wall mounts are delivered unassembled.
QuantitiesApprox.: 1.1 ceiling hangers per m2 ceiling with 2 layers of plasterboard (~load: approx. 23kg/hanger).
Approx.: 1.5 ceiling hangers per m2 ceiling with 3 layers of plasterboard (~load: approx. 23kg/hanger).
Approx.: 3.6 wall mounts per meter wall length (height of ceiling 2.2 - 2.7m)
NoteDimension X can be any length from 65 - 1200mm
Vikas Ceiling Hanger LOH-VB
80
18.5
X
30
70
73
3068
114.5155
Ø6.4
15
6770
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
85
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
Two chromated steel fittings separated by a vibration isolator with a high inner damping.
This ceiling mount effectively isolates vibration and sound transmission of audible frequencies.
MaterialsChromated steel and rubber.
DimensionsSteel thickness: 1.5mmTotal Width: 45mmTotal Length: 115mm
Recommended LoadingStatic load: 2-60kg
Vikas Ceiling Hanger CH2
CH2
0 10 20 30
Deflection (mm)
Load (kg)
0
CH2
0 2 4 6
Natural Frequency (Hz)
Load (kg)
0
CH2-60
10
20
30
40
50
60
70
CH2-30
CH2-20
CH2-1010
20
30
40
50
60
70
CH2-20
CH2-30
CH2-60
CH2-10
43
86 118
35
Ø9 Ø9
86
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
86
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The HHD series of suspending spring mounts consist of a large outer diameter spring and other materials which can isolate vibration and reduce noise. These suspension mounts have a simple structure with an obvious vibration isolation performance making them an ideal component to reducing noise.
Applications
Small air conditioner units, gas / water pipes and fans
Suspending Spring Mount HHD
Model Load(kg)
Load (lbs)
Deflection (mm)
Vertical Rigidity (kg/mm)
Vertical Stiffness (lbs/in)
HHD-10 10 22
20~25(1”)
0.4 22
HHD-20 20 44 0.8 45
HHD-30 30 66 1.2 67
HHD-40 40 88 1.6 90
HHD-50 50 110 2.0 112
HHD-60 60 132 2.4 134
HHD-70 70 154 2.8 157
HHD-80 80 176 3.2 179
HHD-100 100 220 4.0 224
HHD-120 120 264 4.8 269
HHD-140 140 308 5.6 314
HHD-160 160 352 6.4 358
HHD-180 180 396 7.2 403
HHD-200 200 440 8 448
HHD-230 230 507 9.2 515
HHD-250 250 551 10.0 560
HHD-300 300 661 12.0 672
HHD-330 330 727 13.2 739
HHD-360 360 793 14.4 806
ModelOuter Size(±2mm)
L(mm)
W(mm)
H(mm) S S2
HHD-10 ~ HHD-400
105(4.1”)
70(2.8”)
150(5.9”)
M10x50(3/8”x2.0”)
M20150(3/4”x5.9”)
H
L
W
bolt S1
bolt S2
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
87
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The CH1 range is designed for suspension of false acoustic ceilings and machinery operating at more than 450 RPM. (7.5Hz) for loads ranging from 25–350kg.
Components
The spring rests on a rubber sleeve to avoid contact between the steel frame and the threaded rod.
Elastical Characteristics
For: CH1-150, CH1-250 and CH1-350, the vertical natural frequency is from 1.6 to 4Hz.For: CH1-25 to CH1-100, the vertical natural frequency is from 3 to 5Hz.
Installation Instructions
Remove the spring and rubber sleeve and you are ready to fasten the mount in the ceiling.Replace the rubber sleeve, spring and spring cap.Thread the drop-rod through the spring and bolt in place.
Ceiling Hangers CH1
AC
M
ø B
E
H
100
0
200
300
400
500
600
700
800Load (kg) CH1
5 10 15 20 25 30 35 Deflection (mm)
CH1-350
CH1-250
CH1-150
CH1-100
CH1-75CH1-50CH1-25
CH1-500
CH1-750
Type Amm
Hmm
BØ mm
CØ mm
Emm M
CH1-25 75 120 30 12 50 M8
CH1-50 75 120 30 12 50 M8
CH1-75 75 120 30 12 50 M8
CH1-100 75 120 30 12 50 M8
CH1-150 120 160 30 16 80 M12
CH1-250 120 160 30 16 80 M12
CH1-350 120 160 30 16 80 M12
CH1-500 140 180 30 18 100 M14
CH1-750 140 180 30 18 100 M14
88
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
88
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
RG8 ribbed pad is composed of a neoprene rubber, which has good oil / fuel resistance and is anti static with a hardness of 50 Sh.
The plate has ribs running lengthwise on one side and crosswise on the other.
ApplicationsThe RG8 pad is mainly used for the insulation of vibration in the 40-50 Hz and higher range.
Higher deflection can be obtained by layering plates on top of each other. To calculate the vibration isolation for more layers just find the total deflection and look at the chart on page 2.
The pad is particularly well-suited if a machine needs to have a relatively fixed base and at the same time requires insulation against structural noise.
The pad is used in connection with tool machines, printing machines, textile machines, lifts and similar equipment.
SpecificationThe area of pad required is determined by the load. The normal static load is 3.5 kg/cm² where the deflection obtained is 1.2mm.
Load in kg = RG8 plates area (cm²) 3.5
The RG8 pad can withstand a maximum load of 4.3 kg/cm² for a shorter period of time
Fitting The RG8 pad can normally be fitted between the machine and the underlying base. The rubber pad in many cases removes the need for bolting and thereby avoiding bolt holes in the floor or building.
If more than one layer is used, then a 1-2mm steel plate must be used between each layer to ensure a steady foundation.
The panel is best cut with a damp, sharp knife. If the cut piece of plate is 5-10 mm larger than the machine foot it will increase the adhesiveness of the rubber to the floor.
DimensionsPads are available in standard sizes of 500 x 500 x 8mm
Ribbed Rubber Pad RG 8
0 0.5 1.0 1.5 Deflection (mm)
RG 8Load (kg/cm2)4
3
2
1
0
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
89
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
Product Description
The Mafund plate is manufactured in two types with the same hardness of 45 Sh.
The solid Mafund plate is 15mm thick (MF15) and is best used where there is a very high load of up to 54 kg/cm2 and is made from natural rubber.
The hollow Mafund plate 25mm thick (MF25) gives a relatively high deflection. The plate can hold a load of up to 5 kg/cm2 and is made of SBR rubber.
ApplicationsThe Mafund plate is used for the vibration insulation of larger and heavy machinery, typically under a concrete base. The plates can also be used in buildings for noise and vibration insulation between layers of concrete.
SpecificationsThe area of panels required is determined by the load. The normal static load distribution for a hole MF25 plate (50 x 25 cm) is 5 kg/cm2, which gives a deflection of 2.7 mm.
It is possible with both types of panel to obtain higher degrees of deflection by layering panels on top of each other. For example look at curves for MF50, which are 2 layers of MF25.
DimensionsMF15: 500 x 250 x 15mm (Mafund solid)MF25: 500 x 250 x 25mm (Mafund hollow)MF50: 500 x 250 x 50mm (Mafund hollow)
Vikas Mafund Pads MF
Deflection, Static Load
Deflection, Static Load
Deflection, Static Load
0
10
20
30
40
50
60
0 0.5 1 1.5 2Deflection mm
Load
kg/
cm2
Frequency / Static Load
Frequency / Static Load
Frequency / Static Load
0
10
20
30
40
50
60
10 20 30 40 50 60 70
Frequency, Hz
Frequency, Hz
Frequency, Hz
Load
kg/
cm2
Load
kg/
cm2
Load
kg/
cm2
12,5x12.5
25x12.5
25x25
50x25
12.5x12.5
25x12.5
25x25
50x25
0
1
2
3
4
5
6
0 0.5 1 1.5 2 2.5 3 3.5
0
1
2
3
4
5
6
10 15 20 25 30 35 40
0
0.5
1
1.5
2
2.5
3
3.5
0 1 2 3 4 5 60
0.5
1
1.5
2
2.5
3
3.5
10 15 20 25
12.5x12.525x12.5
25x25
50x25
12.5x12.525x12.5
25x25
50x25
12.5x12.5
25x12.525x25
50x25
12.5x12.5
25x12.5
25x25
50x25
MF15 MF15
MF25 MF25
MF50 MF50
Deflection mm
Deflection mm
Load
kg/
cm2
Load
kg/
cm2
90
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
90
Head Office - Winchester, UKT: +44 (0) 1962 873 000F: +44 (0) 1962 873 111E: [email protected]
AustraliaT: +61 (0) 2 8781 0400F: +61 (0) 2 9725 2939E: [email protected]
CanadaT: +1 (905) 612 4000F: +1 (905) 612 8999E: [email protected]
ChinaT: +86 (0) 769 89899966 802F: +86 (0) 769 89899966 810E: [email protected]
DenmarkT: +45 36 77 88 00F: +45 36 78 12 30E: [email protected]
FranceT: +33 (0) 3 20 05 88 88F: +33 (0) 3 20 05 88 99E: [email protected]
GermanyT: +49 (0) 2163 9991 0F: +49 (0) 2163 9991 23E: [email protected]
ItalyT: +39 02 48 44 22 1F: +39 02 48 44 22 22E: [email protected]
SpainT: +34 93 321 6684F: +34 93 321 6249E: [email protected]
UAE - DubaiT: +971 42 517 456F: +971 42 517 457E: [email protected]
USA - HoustonT: +1 (832) 554 0980F: +1 (832) 554 0990E: [email protected]
USA - LincolnT: +1 (402) 323 7272F: +1 (402) 323 7271E: [email protected]
USA - New YorkT: +1 (718) 931 8000F: +1 (718) 863 1138E: [email protected]
BrazilT: +55 21 2584 6549F: +55 21 2584 2457E: [email protected]
Contacts Worldwide Offices
www.iac-acoustics.com
Web: www.iac-acoustics.comEmail: [email protected]: View our online shop for AVMs
91
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
91
www.iac-acoustics.com
92
Erro
rs a
nd O
mis
sion
s Ex
cept
ed (E
&O
E).
www.iac-acoustics.com
UK
-P3-
AVM
-010
1-20
1408
-02
While every effort has been made to ensure the accuracy of information contained in this document, the content is subject to change and we cannot guarantee its accuracy or currency. We reserve the right to make changes to the information without notice. We do not give any warranty as to the ownership of the copyright of any material forming part of this document and do not accept any liability for any direct, indirect, incidental or consequential losses arising from the infringement of any third party rights in relation to any material contained herein.